Date: Sat, 17 Apr 1999 13:01:05 +0200 From: Ollivier Robert <roberto@keltia.freenix.fr> To: current@freebsd.org Subject: Re: HEADS UP!!!! Important instructions for -current users! Message-ID: <19990417130105.A3457@keltia.freenix.fr> In-Reply-To: <19990416213043.95C7B1F69@spinner.netplex.com.au>; from Peter Wemm on Sat, Apr 17, 1999 at 05:30:41AM %2B0800 References: <19990416213043.95C7B1F69@spinner.netplex.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
According to Peter Wemm:
> As a special warning: The APIC_IO interrupt management could be a little
> wonky on systems that require the special mptable fixups. If you have
> warnings about broken mptables, or additional interrupts being wired,
> hold back until it's been checked.
Seems to work fine on my 2x PPro/200, Intel Providence MB, 64 MB, SMP. I've
built but not yet tested the new fxp.ko module though.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #15: Sat Apr 17 12:33:10 CEST 1999
roberto@tara:/src/src/sys/compile/TARA_SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 62119936 (60664K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
cpu1 (AP): apic id: 12, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0307000.
Preloaded elf module "nfs.ko" at 0xc030709c.
Preloaded elf module "linux.ko" at 0xc0307138.
Preloaded elf module "green_saver.ko" at 0xc03071d8.
Preloaded elf module "procfs.ko" at 0xc030727c.
Pentium Pro MTRR support enabled, default memory type is uncacheable
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82440FX (Natoma) PCI and memory controller> at device 0.0 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> at device 6.0 on pci0
fxp0: interrupting at irq 18
fxp0: Ethernet address 00:a0:c9:49:5a:ef
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
uhci0: <Intel 82371SB (PIIX3) USB Host Controller> at device 7.2 on pci0
uhci0: interrupting at irq 10
usb0: <Intel 82371SB (PIIX3) USB Host Controller> on uhci0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec aic7880 Ultra SCSI adapter> at device 9.0 on pci0
ahc0: interrupting at irq 17
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: interrupting at irq 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0
atkbd0: <AT Keyboard> on atkbdc0
atkbd0: interrupting at irq 1
psm0: <PS/2 Mouse> on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
psm0: interrupting at irq 12
vga0: <Generic ISA VGA> on isa0
sc0: <System console> on isa0
sc0: VGA color <10 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: interrupting at irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at irq 3
ppc0 at port 0x378 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppc0: interrupting at irq 7
APIC_IO: routing 8254 via 8259 on pin 0
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
da0 at ahc0 bus 0 target 6 lun 0
da0: <QUANTUM VIKING II 4.5WLS 4110> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
--
Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- roberto@keltia.freenix.fr
FreeBSD keltia.freenix.fr 4.0-CURRENT #2: Fri Apr 16 22:37:03 CEST 1999
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990417130105.A3457>