Date: Thu, 07 Feb 2019 19:50:00 +0100 From: Egoitz Aurrekoetxea <egoitz@sarenet.es> To: freebsd-questions@freebsd.org Subject: Geom strange errors when resizing gpt partition Message-ID: <af825c6fa02a8a7449dfcff9b4ca4fff@sarenet.es> In-Reply-To: <743d2b6a3cd56cb5f3e4d91edbea75f4@sarenet.es> References: <743d2b6a3cd56cb5f3e4d91edbea75f4@sarenet.es>
next in thread | previous in thread | raw e-mail | index | archive | help
Good afternoon,
I recently resized a GEOM partition in FreeBSD 11.1. It was a vm, so I
increased the disk size at hypervisor level, later did a gpart recover,
gpart resize -i partition, and growfs -y...
The disk was configured as :
gpart show
=> 40 1048575920 ada0 GPT (500G)
40 1024 1 freebsd-boot (512K)
1064 8388608 2 freebsd-swap (4.0G)
8389672 1040186288 3 freebsd-ufs (496G)
The 496GB partition was the only increased one (from 200 to 500). All it
was done in a livecd of FreeBSD 11.2. I finally been able to with that
steps to increase the partition, but I'm worried about some errors
received :
I think perhaps they could be just some surely to ignore erros as the
steps given, are the ones described in Handbook (except sysctl
kern.geom.debugflags=16) which I didn't launch because I was using a
livecd and by the way a non mounted file system.
Should I worry about them?. The server is working and the filesystems
mounted...
root@web01c:~ # gpart status
Name Status Components
ada0p1 OK ada0
ada0p2 OK ada0
ada0p3 OK ada0
What do you think about it?.
Best regards,
Best regards,
--
EGOITZ AURREKOETXEA
Departamento de sistemas
944 209 470
Parque Tecnológico. Edificio 103
48170 Zamudio (Bizkaia)
egoitz@sarenet.es
www.sarenet.es [1]
Antes de imprimir este correo electrónico piense si es necesario
hacerlo.
Links:
------
[1] http://www.sarenet.es
From owner-freebsd-questions@freebsd.org Thu Feb 7 21:38:07 2019
Return-Path: <owner-freebsd-questions@freebsd.org>
Delivered-To: freebsd-questions@mailman.ysv.freebsd.org
Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1])
by mailman.ysv.freebsd.org (Postfix) with ESMTP id CD77B14C4CA5
for <freebsd-questions@mailman.ysv.freebsd.org>;
Thu, 7 Feb 2019 21:38:07 +0000 (UTC)
(envelope-from jude.obscure@yandex.com)
Received: from forward103j.mail.yandex.net (forward103j.mail.yandex.net
[IPv6:2a02:6b8:0:801:2::106])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(Client did not present a certificate)
by mx1.freebsd.org (Postfix) with ESMTPS id 334C474F80
for <freebsd-questions@freebsd.org>; Thu, 7 Feb 2019 21:38:05 +0000 (UTC)
(envelope-from jude.obscure@yandex.com)
Received: from mxback10o.mail.yandex.net (mxback10o.mail.yandex.net
[IPv6:2a02:6b8:0:1a2d::24])
by forward103j.mail.yandex.net (Yandex) with ESMTP id 1F5916740813
for <freebsd-questions@freebsd.org>; Fri, 8 Feb 2019 00:38:02 +0300 (MSK)
Received: from smtp2o.mail.yandex.net (smtp2o.mail.yandex.net
[2a02:6b8:0:1a2d::26])
by mxback10o.mail.yandex.net (nwsmtp/Yandex) with ESMTP id wuVYiF3mFm-c2qavOO1;
Fri, 08 Feb 2019 00:38:02 +0300
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yandex.com; s=mail;
t=1549575482; bh=+EvKKyFSq0TIRxSfrOJN58DF4UgjpBjdy88oLDeJb28=;
h=To:From:Subject:Date:Message-ID;
b=jVDMWbqZ+8GF7k9XmZEx/2Im8dlGTe+myPbrVVeuhtPT2UinyqX9yM8vyX0fnE7PM
6oKTGLMd4is3qkKu51jklwrHn//SxjbKaUUN2LLD1NjSTR+wpOR9fp4px3D4HocXMe
RlKCkTDGsm4E+9J80/sJRD8+OZo+o9E1Ua4pJnEU=
Received: by smtp2o.mail.yandex.net (nwsmtp/Yandex) with ESMTPSA id
21CUfoViUo-c0AeXp0M; Fri, 08 Feb 2019 00:38:01 +0300
(using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits))
(Client certificate not present)
Message-ID: <9d4bfcd67f81d28333a7e277658cb7453ec17a80.camel@yandex.com>
Subject: Has anyone attempted creating a Vala project in Anjuta IDE ?
From: Manish Jain <jude.obscure@yandex.com>
To: FreeBSD Questions <freebsd-questions@freebsd.org>
Date: Fri, 08 Feb 2019 03:06:46 +0530
Content-Type: text/plain; charset="UTF-8"
X-Mailer: Evolution 3.28.5 FreeBSD GNOME Team
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Rspamd-Queue-Id: 334C474F80
X-Spamd-Bar: ----
Authentication-Results: mx1.freebsd.org;
dkim=pass header.d=yandex.com header.s=mail header.b=jVDMWbqZ;
dmarc=pass (policy=none) header.from=yandex.com;
spf=pass (mx1.freebsd.org: domain of jude.obscure@yandex.com designates
2a02:6b8:0:801:2::106 as permitted sender)
smtp.mailfrom=jude.obscure@yandex.com
X-Spamd-Result: default: False [-4.26 / 15.00]; RCVD_VIA_SMTP_AUTH(0.00)[];
R_SPF_ALLOW(-0.20)[+ip6:2a02:6b8:0::/52]; MV_CASE(0.50)[];
FREEMAIL_FROM(0.00)[yandex.com]; RCVD_COUNT_THREE(0.00)[4];
TO_DN_ALL(0.00)[]; MX_GOOD(-0.01)[cached: mx.yandex.ru];
DKIM_TRACE(0.00)[yandex.com:+];
DMARC_POLICY_ALLOW(-0.50)[yandex.com,none];
NEURAL_HAM_SHORT(-0.93)[-0.925,0]; FROM_EQ_ENVFROM(0.00)[];
MIME_TRACE(0.00)[0:+]; SUBJECT_ENDS_QUESTION(1.00)[];
FREEMAIL_ENVFROM(0.00)[yandex.com];
ASN(0.00)[asn:13238, ipnet:2a02:6b8::/32, country:RU];
MID_RHS_MATCH_FROM(0.00)[];
RCVD_IN_DNSWL_LOW(-0.10)[6.0.1.0.0.0.0.0.0.0.0.0.2.0.0.0.1.0.8.0.0.0.0.0.8.b.6.0.2.0.a.2.list.dnswl.org
: 127.0.5.1]; ARC_NA(0.00)[];
NEURAL_HAM_MEDIUM(-1.00)[-1.000,0];
R_DKIM_ALLOW(-0.20)[yandex.com:s=mail]; FROM_HAS_DN(0.00)[];
TO_MATCH_ENVRCPT_ALL(0.00)[]; NEURAL_HAM_LONG(-1.00)[-1.000,0];
MIME_GOOD(-0.10)[text/plain];
PREVIOUSLY_DELIVERED(0.00)[freebsd-questions@freebsd.org];
RCPT_COUNT_ONE(0.00)[1];
IP_SCORE(-1.73)[ipnet: 2a02:6b8::/32(-4.80), asn: 13238(-3.84), country:
RU(0.00)]; RCVD_TLS_LAST(0.00)[]
X-BeenThere: freebsd-questions@freebsd.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: User questions <freebsd-questions.freebsd.org>
List-Unsubscribe: <https://lists.freebsd.org/mailman/options/freebsd-questions>,
<mailto:freebsd-questions-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-questions/>;
List-Post: <mailto:freebsd-questions@freebsd.org>
List-Help: <mailto:freebsd-questions-request@freebsd.org?subject=help>
List-Subscribe: <https://lists.freebsd.org/mailman/listinfo/freebsd-questions>,
<mailto:freebsd-questions-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Thu, 07 Feb 2019 21:38:08 -0000
Hi,
On FreeBSD 12, I am trying to create a Hello World (GTK) application
in Vala using Anjuta. My project sources consist of hello.vala (very
rudimentary), besides files auto-generated by Anjuta.
But when I try to build the project, Anjuta reports failure stating :
"Do not know how to make hello.c"
A message to the Anjuta mailing list got me confirmation that they
have never attempted Vala projects under FreeBSD.
Has anyone in our part of the world ever tried creating a Vala project
in Anjuta IDE ? Thanks for any help.
PS: it appears this is an autotools problem which tries to use BSD make
instead of GNU make.
Manish Jain
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?af825c6fa02a8a7449dfcff9b4ca4fff>