Date: Tue, 5 Sep 2000 11:05:09 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: John Baldwin <jhb@pike.osd.bsdi.com>, Doug Rabson <dfr@nlsystems.com>, alpha@FreeBSD.ORG Subject: Re: what was the last patch you sent out? Message-ID: <Pine.LNX.4.21.0009051059330.11930-100000@zeppo.feral.com> In-Reply-To: <Pine.LNX.4.21.0009051057290.11930-100000@zeppo.feral.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Well, Rawhide boots. I sure wish I knew what the authors intended by saying
"physical bus". I don't seems quite correct since we seem to have two
different "physical bus" zeros here. On puropose I very carefully don't have
overlapping cards (as in, same slot, different busses).
I guess pc164 is another issue. Back to debugging.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sio 0 at to isa (string)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 flags to 80 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting vga 0 at to isa (string)
FreeBSD 5.0-CURRENT #1: Tue Sep 5 10:49:03 PDT 2000
mjacob@nellie.feral.com:/tstsys/compile/GENERIC
AlphaServer 4100
AlphaServer 4100 5/533 4MB, 531MHz
8192 byte page size, 4 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000100020117
real memory = 1608482816 (1570784K bytes)
Physical memory chunk(s):
0x007f0000 - 0x5ffeffff, 1602224128 bytes (195584 pages)
avail memory = 1559994368 (1523432K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007d4000.
Preloaded elf module "ispfw.ko" at 0xfffffc00007d40c0.
mem: <memory & I/O>
nulldev: <null device, zero device>
random: <entropy source>
Creating DISK md0
md0: Malloc disk
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0: physical bus=0
found-> vendor=0x1000, dev=0x0001, revid=0x02
bus=0, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=4
map[10]: type 4, range 32, base 01fffc00, size 8, enabled
map[14]: type 1, range 32, base 07fdde00, size 8, enabled
found-> vendor=0x1011, dev=0x0009, revid=0x12
bus=0, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=8
map[10]: type 4, range 32, base 01fffd00, size 7, enabled
map[14]: type 1, range 32, base 07fddf00, size 7, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=16
map[10]: type 4, range 32, base 01fffe00, size 8, enabled
map[14]: type 1, range 32, base 07fde000, size 12, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=20
map[10]: type 4, range 32, base 01ffff00, size 8, enabled
map[14]: type 1, range 32, base 07fdf000, size 12, enabled
pci0: <PCI bus> on pcib0
sym0: <810> port 0x1fffc00-0x1fffcff mem 0x7fdde00-0x7fddeff irq 4 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 268 msec, 33165 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 284 msec, 31296 KHz
sym0: interrupting at IRQ 0x10 intA (vec 0xb40)
de0: <Digital 21140 Fast Ethernet> port 0x1fffd00-0x1fffd7f mem 0x7fddf00-0x7fddf7f irq 8 at device 2.0 on pci0
de0: interrupting at IRQ 0x0 intA (vec 0xb80)
de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:f8:01:8b:d7
de0: enabling Full Duplex 100baseTX port
bpf: de0 attached
Qlogic ISP Driver, FreeBSD Version 5.3, Core Version 2.0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1fffe00-0x1fffeff mem 0x7fde000-0x7fdefff irq 16 at device 4.0 on pci0
isp0: using Memory space register mapping
isp0: interrupting at IRQ 0x8 intA (vec 0xc00)
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, loaded F/W Revision 4.65.0
isp0: Last F/W revision was 5.57.1
isp1: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffff00-0x1ffffff mem 0x7fdf000-0x7fdffff irq 20 at device 5.0 on pci0
isp1: using Memory space register mapping
isp1: interrupting at IRQ 0xc intA (vec 0xc40)
isp1: Differential Mode
isp1: Ultra Mode Capable
isp1: Board Revision 1040B, loaded F/W Revision 4.65.0
isp1: Last F/W revision was 5.57.1
pcib1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
pcib1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
Attaching Real Console
pci1: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x15
bus=0, slot=1, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1077, dev=0x2100, revid=0x03
bus=0, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 4, range 32, base 01ffff00, size 8, enabled
map[14]: type 1, range 32, base 07fef000, size 12, enabled
pci1: <PCI bus> on pcib1
isab0: <Intel 82375EB PCI-EISA bridge> at device 1.0 on pci1
isa0: <ISA bus> on isab0
isp2: <Qlogic ISP 2100 PCI FC-AL Adapter> port 0x1ffff00-0x1ffffff mem 0x7fef000-0x7feffff irq 12 at device 3.0 on pci1
isp2: using Memory space register mapping
isp2: interrupting at IRQ 0x4 intA (vec 0x9c0)
isp2: Board Revision 2100, loaded F/W Revision 1.19.10
isp2: Installed in 64-Bit PCI slot
isp2: invalid NVRAM header
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 532793936 Hz (firmware 531914893 Hz)
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: no video adapter is found.
sc0: <System console> failed to probe on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0 0 0 0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0
vga0: <Generic ISA VGA> failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
Timecounter "alpha" frequency 532793936 Hz
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
bpf: faith0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe5:sym0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:sym0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:sym0:0:5:0): Invalid field in CDB sks:c8,1
isp0: 0.1 get user period 0xc offset 0x8 flags 0xfd00
isp0: 0.1 get current period 0x19 offset 0x0 flags 0xc5c0
isp0: 0.1 set current period 0xc offset 0x8 flags 0xfd00
isp0: 0.0 get user period 0xc offset 0x8 flags 0xfd00
isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc5c0
isp0: 0.0 set current period 0xc offset 0x8 flags 0xfd00
Creating DISK cd0
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK da3
Creating DISK da4
Creating DISK da5
Creating DISK da6
Creating DISK da7
Creating DISK da8
Creating DISK da9
Creating DISK da10
Creating DISK da11
pass0 at sym0 bus 0 target 5 lun 0
pass0: <DEC RRD46 (C) DEC 1337> Removable CD-ROM SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
pass1 at sym0 bus 0 target 6 lun 0
pass1: <DEC TLZ09 (C)DEC 0173> Removable Sequential Access SCSI-2 device
pass1: Serial Number 0003203169
pass1: 10.000MB/s transfers (10.000MHz, offset 8)
pass2 at isp0 bus 0 target 0 lun 0
pass2: <IBM DCHS04U 2929> Fixed Direct Access SCSI-2 device
pass2: Serial Number 6810CA31
isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00
pass2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass3 at isp0 bus 0 target 1 lun 0
pass3: <SEAGATE ST15230W 0638> Fixed Direct Access SCSI-2 device
pass3: Serial Number 00586797
isp0: 0.1 get current period 0x19 offset 0x8 flags 0xfd00
pass3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass4 at isp2 bus 0 target 130 lun 0
pass4: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass4: Serial Number 3AL0A7XW00001952HJAD
pass4: 100.000MB/s transfers, Tagged Queueing Enabled
pass5 at isp2 bus 0 target 131 lun 0
pass5: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass5: Serial Number 3AL0A7Z500001952HKAS
pass5: 100.000MB/s transfers, Tagged Queueing Enabled
pass6 at isp2 bus 0 target 132 lun 0
pass6: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass6: Serial Number 3AL0A7W5000019461C4F
pass6: 100.000MB/s transfers, Tagged Queueing Enabled
pass7 at isp2 bus 0 target 133 lun 0
pass7: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass7: Serial Number 3AL0A7T900001952HQSF
pass7: 100.000MB/s transfers, Tagged Queueing Enabled
pass8 at isp2 bus 0 target 134 lun 0
pass8: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass8: Serial Number 3AL0A7XP00001952HJN6
pass8: 100.000MB/s transfers, Tagged Queueing Enabled
pass9 at isp2 bus 0 target 135 lun 0
pass9: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass9: Serial Number LP16582800001907192A
pass9: 100.000MB/s transfers, Tagged Queueing Enabled
pass10 at isp2 bus 0 target 136 lun 0
pass10: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass10: Serial Number LP178241000019072AX4
pass10: 100.000MB/s transfers, Tagged Queueing Enabled
pass11 at isp2 bus 0 target 137 lun 0
pass11: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass11: Serial Number LP159124000019072C69
pass11: 100.000MB/s transfers, Tagged Queueing Enabled
pass12 at isp2 bus 0 target 138 lun 0
pass12: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass12: Serial Number LP061822000019071808
pass12: 100.000MB/s transfers, Tagged Queueing Enabled
pass13 at isp2 bus 0 target 139 lun 0
pass13: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass13: Serial Number LP21423900001907191R
pass13: 100.000MB/s transfers, Tagged Queueing Enabled
sa0 at sym0 bus 0 target 6 lun 0
sa0: <DEC TLZ09 (C)DEC 0173> Removable Sequential Access SCSI-2 device
sa0: Serial Number 0003203169
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
da2 at isp2 bus 0 target 130 lun 0
da2: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
da2: Serial Number 3AL0A7XW00001952HJAD
da2: 100.000MB/s transfers, Tagged Queueing Enabled
da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da1 at isp0 bus 0 target 1 lun 0
da1: <SEAGATE ST15230W 0638> Fixed Direct Access SCSI-2 device
da1: Serial Number 00586797
isp0: 0.1 get current period 0x19 offset 0x8 flags 0xfd00
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)
da3 at isp2 bus 0 target 131 lun 0
da3: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
da3: Serial Number 3AL0A7Z500001952HKAS
da3: 100.000MB/s transfers, Tagged Queueing Enabled
da3: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da4 at isp2 bus 0 target 132 lun 0
da4: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
da4: Serial Number 3AL0A7W5000019461C4F
da4: 100.000MB/s transfers, Tagged Queueing Enabled
da4: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da0 at isp0 bus 0 target 0 lun 0
da0: <IBM DCHS04U 2929> Fixed Direct Access SCSI-2 device
da0: Serial Number 6810CA31
isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4303MB (8813870 512 byte sectors: 255H 63S/T 548C)
da5 at isp2 bus 0 target 133 lun 0
da5: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
da5: Serial Number 3AL0A7T900001952HQSF
da5: 100.000MB/s transfers, Tagged Queueing Enabled
da5: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da6 at isp2 bus 0 target 134 lun 0
da6: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
da6: Serial Number 3AL0A7XP00001952HJN6
da6: 100.000MB/s transfers, Tagged Queueing Enabled
da6: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da7 at isp2 bus 0 target 135 lun 0
da7: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
da7: Serial Number LP16582800001907192A
da7: 100.000MB/s transfers, Tagged Queueing Enabled
da7: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da8 at isp2 bus 0 target 136 lun 0
da8: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
da8: Serial Number LP178241000019072AX4
da8: 100.000MB/s transfers, Tagged Queueing Enabled
da8: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da9 at isp2 bus 0 target 137 lun 0
da9: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
da9: Serial Number LP159124000019072C69
da9: 100.000MB/s transfers, Tagged Queueing Enabled
da9: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da10 at isp2 bus 0 target 138 lun 0
da10: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
da10: Serial Number LP061822000019071808
da10: 100.000MB/s transfers, Tagged Queueing Enabled
da10: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da11 at isp2 bus 0 target 139 lun 0
da11: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
da11: Serial Number LP21423900001907191R
da11: 100.000MB/s transfers, Tagged Queueing Enabled
da11: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
(cd0:sym0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:5:0): NOT READY asc:3a,0
(cd0:sym0:0:5:0): Medium not present
cd0 at sym0 bus 0 target 5 lun 0
cd0: <DEC RRD46 (C) DEC 1337> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/da0a
da0: invalid primary partition table: no magic
start_init: trying /sbin/init
da1: invalid primary partition table: no magic
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0009051059330.11930-100000>