Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 11 Aug 2000 19:30:02 -0700 (PDT)
From:      Ben Hacker Jr <strbenjr@yahoo.com>
To:        list DC-FBSD <fug-washdc@Sytex.Net>, questions FBSD <freebsd-questions@FreeBSD.ORG>
Subject:   Re: Re: Router "ie2?" issue
Message-ID:  <20000812023002.12263.qmail@web4503.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help
Problems almost solved!

I was able to get two of the Intel NIC cards to 
work properly.  The problem was my understanding 
of the "iomem 0xd0000" value and how to set it in 
the kernel config.

I still cannot get "ie0" to work. "ie1 & 2" work 
better than fine.  I also purchased an "SMC 8216c" 
card($3.00) and decided to use that instead of the 
Intel at "ie0".

Now I have "ed0, ie1, ie2" (plus my xl0).

The three are working GREAT and the speed increase 
over the 3c509 cards (ep0,1,2) is at least 4 times
faster and NO Lockups!!

When LINT says the "ep" driver is buggy it's not 
kidding!!

I still have ONE real problem.  The machine seems 
to be working fine and routes properly but If I
tell it to reboot it will hang right after the 
"syncing drive ...X X done" comes up.

If I boot the machine with my "10Mb-NIC-less" kernel 
then it will reboot properly.

Any ideas??

Also, the ieX driver defaults to "msize=32768~"
Is there a way to tell it to default to 16384 in 
the kernel config??  (msize 16384 or 0x4000 gets 
a syntax error)

--- Ben Hacker Jr <strbenjr@yahoo.com> wrote:
> 
> Hello...
> 
> Any help would be greatly appreciated...
> I am not a reader on the FreeBSD Questions list so
> please respond directly if you are from that list.
> 
> I should have asked what kind of ISA NIC works 
> best before buying...
> 
> I am having the hardest time getting three 
> Intel EtherExpress NIC's to work on this machine.
> (Intel PCLA8100 EtherExpress 16 ISA 10BT RJ45, BNC,
> AUI. ISA Card -- Intel original) $7.00ea
> 
> I am running:
> $ uname -a
> FreeBSD me.work.com 3.4-STABLE FreeBSD 3.4-STABLE
> #8:
> Fri Aug 11 14:59:43 EDT 2000
> me@gate.work.com:/usr/src/sys/compile/GATE-5  i386
> $
>
> This box (HP Vectra)is a router and I am 
> getting rid of my three 3c509 cards due to 
> problems with the "ep" driver.
> 
> Looking at the KERNEL config file section for the 
> ISA NIC's:
> # ISA Ethernet NICs.
> #device   ed0  at isa? port 0x280 net irq 10
> iomem 0xd8000
> #device   ie0  at isa? port 0x300 net irq 10
> iomem 0xd0000
> device    ie0  at isa? port 0x300 net irq 10  **
> iomem 0x00000
> #device   ep0  at isa? port 0x300 net irq 10
> #device   ex0     at isa? port? net irq ?
> #
> 
> I don't know what to do with this "iomem 0xd0000" 
> parameter.  I have tried setting the card to 
> "NO Memory mapped" and removed the IOMEM but if the 
> card is present the system won't even boot.
> 
> When I try to configure the IOMEM to match the 
> card I just get a error saying the "Kernel 
> mapped location doesn't match the card mapped 
> location"
> 
> The card setup program only gives me choices like:
> cc00
> d000
> d400
> etc...
> 
> Can anyone help??
> =====

=====
-=*=- -=*=- -=*=- -=*=-  -=*=- -=*=- -=*=- -=*=- -=*=-
Ben Hacker Jr            Technical Specialist
                         Computer Sciences Corporation
(703) 289-3477           MC 291
bhacker1@csc.com         3170 Fairview Park Drive
strben@altavista.com     Falls Church, VA   22304
-=*=- -=*=- -=*=- -=*=-  -=*=- -=*=- -=*=- -=*=- -=*=-

__________________________________________________
Do You Yahoo!?
Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com/


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000812023002.12263.qmail>