From owner-freebsd-questions@FreeBSD.ORG Sun Jul 25 05:42:26 2010 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 58F0D1065677 for ; Sun, 25 Jul 2010 05:42:26 +0000 (UTC) (envelope-from mak@kolybabi.com) Received: from mail.nepharia.org (mail.nepharia.org [209.44.104.71]) by mx1.freebsd.org (Postfix) with ESMTP id AE3A18FC26 for ; Sun, 25 Jul 2010 05:42:25 +0000 (UTC) Received: by mail.nepharia.org (Postfix, from userid 65534) id 75B873E9D05; Sun, 25 Jul 2010 00:42:24 -0500 (CDT) X-Spam-Checker-Version: SpamAssassin 3.3.0 (2010-01-18) on mail.nepharia.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=5.0 tests=ALL_TRUSTED autolearn=disabled version=3.3.0 Received: from brisbane.nepharia.org (wnpgmb0816w-ds01-16-115.dynamic.mts.net [207.161.16.115]) by mail.nepharia.org (Postfix) with ESMTPSA id 7153A3E9D05; Sun, 25 Jul 2010 00:42:20 -0500 (CDT) Message-ID: <4C4BCEA6.4010103@kolybabi.com> Date: Sun, 25 Jul 2010 00:41:58 -0500 From: Mak Kolybabi User-Agent: Thunderbird 2.0.0.24 (X11/20100630) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: multipart/mixed; boundary="------------040205070608060603040802" Cc: dave@ysarro.com Subject: FreeBSD 8.1 AHCI Timeouts X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 25 Jul 2010 05:42:26 -0000 This is a multi-part message in MIME format. --------------040205070608060603040802 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I bought a netbook today, and am trying to get FreeBSD 8.1 amd64 installed on it. As is my custom, I'm trying to back up the default system image the device came with. But no matter what I do, FreeBSD seems unable to properly interact with the hard drive. The netbook is a Toshiba NB250. The hard drive is listed by the BIOS as TOSHIBA MK1665GSXV-(S1). The BIOS version is V1.30. The first thing I did was boot the FreeBSD 8.1 amd64 USB install image, move to a fixit session using the live USB filesystem, and try and dd the hard drive to a USB stick. When I did that, the dd went terribly slow (a few KB a minute, before stalling), while dmesg was printing out: > ad0: FAILURE - READ_DMA status=51 error=0 LBA=20530 These DMA failures occur regardless of whether the drive is in compatibility or AHCI mode. The next thing I did was boot again, changed the drive to AHCI mode, and did a "load ahci.ko" in the bootloader command prompt. The dd caused: > ahcich0: Timeout on slot 0 > ahcich0: is 00000000 cs 00000000 ss 00000000 rs 00000000 tfd 40 serr 00000000 The next thing I did was boot again, with the drive in AHCI mode, and did a "load ataahci.ko" in the bootloader command prompt. The dd caused: > ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=2048 Doing some searches on the Internet for this problem, people often asked for verbose dmesg, pciconf, and vmstat output. I have attached them all. Any assistance would be greatly appreciated. --------------040205070608060603040802 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8127c000. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff8127c230. Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff8127c280. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1662690860 Hz CPU: Intel(R) Atom(TM) CPU N455 @ 1.66GHz (1662.69-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106ca Family = 6 Model = 1c Stepping = 10 Features=0xbfe9fbff Features2=0x40e39d AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant real memory = 1073741824 (1024 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) 0x00000000012aa000 - 0x000000003d7cbfff, 1012015104 bytes (247074 pages) avail memory = 1004281856 (957 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff800000e000 x86bios: EBDA 0x09d000-0x09ffff at 0xffffff000009d000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf7ca0 00024 (v2 TOSCPL) ACPI: XSDT 0x3f5d7ae1 00074 (v1 TOSCPL TOSCPL00 06040000 LTP 00000000) ACPI: FACP 0x3f5dfc60 000F4 (v3 TOSCPL TOSCPL00 06040000 PTL 00000002) ACPI: DSDT 0x3f5d8c77 06F75 (v1 TOSCPL TOSCPL00 06040000 MSFT 03000000) ACPI: FACS 0x3f5e2fc0 00040 ACPI: TCPA 0x3f5dfd54 00032 (v1 Phoeni x 06040000 TL 00000000) ACPI: HPET 0x3f5dfd86 00038 (v1 DELL M09 06040000 LOHR 0000005A) ACPI: MCFG 0x3f5dfdbe 0003C (v1 INTEL CRESTLNE 06040000 LOHR 0000005A) ACPI: SLIC 0x3f5dfdfa 00176 (v1 TOSCPL TOSCPL00 06040000 LOHR 00000000) ACPI: APIC 0x3f5dff70 00068 (v1 TOSCPL TOSCPL00 06040000 LTP 00000000) ACPI: BOOT 0x3f5dffd8 00028 (v1 TOSCPL TOSCPL00 06040000 LTP 00000001) ACPI: SSDT 0x3f5d80d7 0025F (v1 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 0x3f5d8031 000A6 (v1 PmRef Cpu1Tst 00003000 INTL 20050624) ACPI: SSDT 0x3f5d7b55 004DC (v2 PmRef CpuPm 00003000 INTL 20050624) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: null: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.MPCE -> bus 0 dev 0 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff8000003000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.REGS -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.IGD0.IGDP -> bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.REGS -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.MMTO -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRX -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRY -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 ACPI: SSDT 0x3f5d89a0 00203 (v2 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 0x3f5d8336 005E5 (v2 PmRef Cpu0Cst 00003001 INTL 20050624) cpu1: on acpi0 ACPI: SSDT 0x3f5d8ba3 000D4 (v2 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 0x3f5d891b 00085 (v2 PmRef Cpu1Cst 00003000 INTL 20050624) acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0xa010, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0xa011, revid=0x00 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xf0200000, size 19, enabled map[14]: type I/O Port, range 32, base 0x18d0, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled map[1c]: type Memory, range 32, base 0xf0000000, size 20, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0xa012, revid=0x00 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf0280000, size 19, enabled found-> vendor=0x8086, dev=0x27d8, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf0500000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x27d0, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d2, revid=0x02 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27d4, revid=0x02 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27c8, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 found-> vendor=0x8086, dev=0x27c9, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 found-> vendor=0x8086, dev=0x27ca, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 found-> vendor=0x8086, dev=0x27cb, revid=0x02 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=7 map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 found-> vendor=0x8086, dev=0x27cc, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf0504000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0504000 found-> vendor=0x8086, dev=0x2448, revid=0xe2 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0005, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27bc, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c1, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x18e8, size 3, enabled map[14]: type I/O Port, range 32, base 0x18dc, size 2, enabled map[18]: type I/O Port, range 32, base 0x18e0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x18d8, size 2, enabled map[20]: type I/O Port, range 32, base 0x18c0, size 4, enabled map[24]: type Memory, range 32, base 0xf0504400, size 10, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27da, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 vgapci0: port 0x18d0-0x18d7 mem 0xf0200000-0xf027ffff,0xd0000000-0xdfffffff,0xf0000000-0xf00fffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xf0200000 vgapci0: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xf0000000 agp0: detected 8188k stolen memory agp0: aperture size is 256M vgapci1: mem 0xf0280000-0xf02fffff at device 2.1 on pci0 pci0: at device 27.0 (no driver attached) pcib1: irq 16 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 5 pcib1: subordinate bus 5 pcib1: I/O decode 0x0-0x0 pcib1: no prefetched decode pci5: on pcib1 pci5: domain=0, physical bus=5 pcib2: irq 17 at device 28.1 on pci0 pcib2: domain 0 pcib2: secondary bus 7 pcib2: subordinate bus 7 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xf0100000-0xf01fffff pcib2: no prefetched decode pci7: on pcib2 pci7: domain=0, physical bus=7 found-> vendor=0x168c, dev=0x002b, revid=0x01 domain=0, bus=7, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xf0100000, size 16, enabled pcib2: requested memory range 0xf0100000-0xf010ffff: good pcib2: matched entry for 7.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 ath0: mem 0xf0100000-0xf010ffff irq 17 at device 0.0 on pci7 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf0100000 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 49 ath0: [MPSAFE] ath0: [ITHREAD] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps ath0: AR9285 mac 192.2 RF5133 phy 14.0 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons ath0: using multicast key search pcib3: irq 18 at device 28.2 on pci0 pcib3: domain 0 pcib3: secondary bus 9 pcib3: subordinate bus 9 pcib3: I/O decode 0x2000-0x2fff pcib3: prefetched decode 0xf0500000-0xf05fffff pci9: on pcib3 pci9: domain=0, physical bus=9 found-> vendor=0x10ec, dev=0x8136, revid=0x05 domain=0, bus=9, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 4 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib3: requested I/O range 0x2000-0x20ff: in range map[18]: type Prefetchable Memory, range 64, base 0xf050c000, size 12, enabled pcib3: requested memory range 0xf050c000-0xf050cfff: good map[20]: type Prefetchable Memory, range 64, base 0xf0508000, size 14, enabled pcib3: requested memory range 0xf0508000-0xf050bfff: good pcib3: matched entry for 9.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 re0: port 0x2000-0x20ff mem 0xf050c000-0xf050cfff,0xf0508000-0xf050bfff irq 18 at device 0.0 on pci9 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf050c000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 50 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00000000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 88:ae:1d:46:55:36 re0: [MPSAFE] re0: [FILTER] uhci0: port 0x1820-0x183f irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: on uhci0 uhci1: port 0x1840-0x185f irq 19 at device 29.1 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: on uhci1 uhci2: port 0x1860-0x187f irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus2: on uhci2 uhci3: port 0x1880-0x189f irq 16 at device 29.3 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54 uhci3: [MPSAFE] uhci3: [ITHREAD] usbus3: on uhci3 ehci0: mem 0xf0504000-0xf05043ff irq 23 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: on ehci0 pcib4: at device 30.0 on pci0 pcib4: domain 0 pcib4: secondary bus 17 pcib4: subordinate bus 17 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci17: on pcib4 pci17: domain=0, physical bus=17 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0x18e8-0x18ef,0x18dc-0x18df,0x18e0-0x18e7,0x18d8-0x18db,0x18c0-0x18cf mem 0xf0504400-0xf05047ff irq 19 at device 31.2 on pci0 ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xf0504400 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 55 ahci0: using IRQ 257 for MSI ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PMD SSC PSC 32cmd 4ports ahci0: Caps2: ahcich0: at channel 0 on ahci0 ahcich0: [MPSAFE] ahcich0: [ITHREAD] ahcich0: Caps: ahcich1: at channel 1 on ahci0 ahcich1: [MPSAFE] ahcich1: [ITHREAD] ahcich1: Caps: ahcich2: at channel 2 on ahci0 ahcich2: [MPSAFE] ahcich2: [ITHREAD] ahcich2: Caps: ahcich3: at channel 3 on ahci0 ahcich3: [MPSAFE] ahcich3: [ITHREAD] ahcich3: Caps: pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xce000-0xcefff,0xdc000-0xdffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart0: failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: on cpu0 p4tcc0: on cpu0 est1: on cpu1 p4tcc1: on cpu1 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 83134550 Hz Timecounter "TSC" frequency 1662690860 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ahcich0: AHCI reset... ahcich0: SATA connect time=0ms status=00000123 ahcich0: ready wait time=0ms ahcich0: AHCI reset done: device found ahcich1: AHCI reset... ahcich1: SATA offline status=00000004 ahcich1: AHCI reset done: phy reset found no device ahcich2: AHCI reset... ahcich2: SATA offline status=00000004 ahcich2: AHCI reset done: phy reset found no device ahcich3: AHCI reset... ahcich3: SATA offline status=00000004 ahcich3: AHCI reset done: phy reset found no device (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 md0: Preloaded image 4194304 bytes at 0xffffffff80e6aa98usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number 50KBB02ZB ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: ATA-8 SATA 2.x device pass0: Serial Number 50KBB02ZB pass0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) pass0: Command Queueing enabled acpi_acad0: acline initialization start battery0: battery initialization start ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 GEOM: new disk ada0 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered GEOM: ada0: partition 4 does not start on a track boundary. GEOM: ada0: partition 4 does not end on a track boundary. GEOM: ada0: partition 3 does not start on a track boundary. GEOM: ada0: partition 3 does not end on a track boundary. GEOM: ada0: partition 2 does not start on a track boundary. GEOM: ada0: partition 2 does not end on a track boundary. GEOM: ada0: partition 1 does not start on a track boundary. GEOM: ada0: partition 1 does not end on a track boundary. uhub4: 8 ports with 8 removable, self powered ugen4.2: at usbus4 umass0: on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:4:0:-1: Attached to scbus4 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim0:0:0:0): SCSI status error (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (probe0:umass-sim0:0:0:0): Error 6, Unretryable error pass1 at umass-sim0 bus 0 scbus4 target 0 lun 0 pass1: Removable Direct Access SCSI-0 device pass1: Serial Number 20090516388200000 pass1: 40.000MB/s transfers (da0:umass-sim0:0:0:0): SCSI status error (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (da0:umass-sim0:0:0:0): Error 6, Unretryable error da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: Serial Number 20090516388200000 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present ugen4.3: at usbus4 umass1: on usbus4 umass1: SCSI over Bulk-Only; quirks = 0x4000 umass1:5:1:-1: Attached to scbus5 pass2 at umass-sim1 bus 1 scbus5 target 0 lun 0 pass2: Removable Direct Access SCSI-2 device pass2: Serial Number 2821200085074C11 pass2: 40.000MB/s transfers da1 at umass-sim1 bus 1 scbus5 target 0 lun 0 da1: Removable Direct Access SCSI-2 device da1: Serial Number 2821200085074C11 da1: 40.000MB/s transfers da1: 1985MB (4065280 512 byte sectors: 255H 63S/T 253C) ugen4.4: at usbus4 ahcich0: Timeout on slot 0 ahcich0: is 00000000 cs 00000000 ss 00000000 rs 00000001 tfd 40 serr 00000000 ahcich0: AHCI reset... ahcich0: SATA connect time=0ms status=00000123 ahcich0: ready wait time=0ms ahcich0: AHCI reset done: device found (ada0:ahcich0:0:0:0): Command timed out (ada0:ahcich0:0:0:0): Retrying command GEOM: new disk da0 GEOM: new disk da1 (da0:umass-sim0:0:0:0): SCSI status error (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (da0:umass-sim0:0:0:0): Error 6, Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): SCSI status error (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (da0:umass-sim0:0:0:0): Error 6, Unretryable error Opened disk da0 -> 6 GEOM: da1: media size does not match label. Trying to mount root from ufs:/dev/md0 ct_to_ts([2010-07-25 12:44:09]) = 1280061849.000000000 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall battery0: battery initialization failed, giving up ugen4.5: at usbus4 umass2: on usbus4 umass2: SCSI over Bulk-Only; quirks = 0x0000 umass2:6:2:-1: Attached to scbus6 (probe0:umass-sim2:2:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim2:2:0:0): SCSI status error (probe0:umass-sim2:2:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim2:2:0:0): CAM status: SCSI Status Error (probe0:umass-sim2:2:0:0): SCSI status: Check Condition (probe0:umass-sim2:2:0:0): SCSI sense: UNIT ATTENTION asc:3a,0 (Medium not present) (probe0:umass-sim2:2:0:0): Retrying command (per sense data) pass3 at umass-sim2 bus 2 scbus6 target 0 lun 0 pass3: Removable Direct Access SCSI-0 device pass3: Serial Number 35145307E35347F3 pass3: 40.000MB/s transfers GEOM: new disk da2 da2 at umass-sim2 bus 2 scbus6 target 0 lun 0 da2: Removable Direct Access SCSI-0 device da2: Serial Number 35145307E35347F3 da2: 40.000MB/s transfers da2: 7663MB (15695871 512 byte sectors: 255H 63S/T 977C) GEOM: da2s1: geometry does not match label (128h,63s != 255h,63s). ugen4.5: at usbus4 (disconnected) umass2: at uhub4, port 1, addr 5 (disconnected) (da2:umass-sim2:2:0:0): lost device (da2:umass-sim2:2:0:0): removing device entry (pass3:umass-sim2:2:0:0): lost device (pass3:umass-sim2:2:0:0): removing device entry ugen4.5: at usbus4 umass2: on usbus4 umass2: SCSI over Bulk-Only; quirks = 0x0000 umass2:6:2:-1: Attached to scbus6 (probe0:umass-sim2:2:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim2:2:0:0): SCSI status error (probe0:umass-sim2:2:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim2:2:0:0): CAM status: SCSI Status Error (probe0:umass-sim2:2:0:0): SCSI status: Check Condition (probe0:umass-sim2:2:0:0): SCSI sense: UNIT ATTENTION asc:3a,0 (Medium not present) (probe0:umass-sim2:2:0:0): Retrying command (per sense data) (probe0:umass-sim2:2:0:0): SCSI status error (probe0:umass-sim2:2:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim2:2:0:0): CAM status: SCSI Status Error (probe0:umass-sim2:2:0:0): SCSI status: Check Condition (probe0:umass-sim2:2:0:0): SCSI sense: UNIT ATTENTION asc:3a,0 (Medium not present) (probe0:umass-sim2:2:0:0): Retrying command (per sense data) pass3 at umass-sim2 bus 2 scbus6 target 0 lun 0 pass3: Removable Direct Access SCSI-0 device pass3: Serial Number 35145307E35347F3 pass3: 40.000MB/s transfers GEOM: new disk da2 da2 at umass-sim2 bus 2 scbus6 target 0 lun 0 da2: Removable Direct Access SCSI-0 device da2: Serial Number 35145307E35347F3 da2: 40.000MB/s transfers da2: 7663MB (15695871 512 byte sectors: 255H 63S/T 977C) ugen4.2: at usbus4 (disconnected) umass0: at uhub4, port 4, addr 2 (disconnected) (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry (pass1:umass-sim0:0:0:0): lost device (pass1:umass-sim0:0:0:0): removing device entry ugen4.2: at usbus4 umass0: on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:4:0:-1: Attached to scbus4 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim0:0:0:0): SCSI status error (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (probe0:umass-sim0:0:0:0): Error 6, Unretryable error pass1 at umass-sim0 bus 0 scbus4 target 0 lun 0 pass1: Removable Direct Access SCSI-0 device pass1: Serial Number 20090516388200000 pass1: 40.000MB/s transfers GEOM: new disk da0 (da0:umass-sim0:0:0:0): SCSI status error (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (da0:umass-sim0:0:0:0): Error 6, Unretryable error da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: Serial Number 20090516388200000 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): SCSI status error (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (da0:umass-sim0:0:0:0): Error 6, Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): SCSI status error (da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) (da0:umass-sim0:0:0:0): Error 6, Unretryable error Opened disk da0 -> 6 --------------040205070608060603040802 Content-Type: text/plain; name="pciconf" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="pciconf" hostb0@pci0:0:0:0: class=0x060000 card=0xff601179 chip=0xa0108086 rev=0x00 hdr=0x00 class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0xff601179 chip=0xa0118086 rev=0x00 hdr=0x00 class = display subclass = VGA vgapci1@pci0:0:2:1: class=0x038000 card=0xff601179 chip=0xa0128086 rev=0x00 hdr=0x00 class = display none0@pci0:0:27:0: class=0x040300 card=0xff601179 chip=0x27d88086 rev=0x02 hdr=0x00 class = multimedia subclass = HDA pcib1@pci0:0:28:0: class=0x060400 card=0xff601179 chip=0x27d08086 rev=0x02 hdr=0x01 class = bridge subclass = PCI-PCI pcib2@pci0:0:28:1: class=0x060400 card=0xff601179 chip=0x27d28086 rev=0x02 hdr=0x01 class = bridge subclass = PCI-PCI pcib3@pci0:0:28:2: class=0x060400 card=0xff601179 chip=0x27d48086 rev=0x02 hdr=0x01 class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0xff601179 chip=0x27c88086 rev=0x02 hdr=0x00 class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0xff601179 chip=0x27c98086 rev=0x02 hdr=0x00 class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0xff601179 chip=0x27ca8086 rev=0x02 hdr=0x00 class = serial bus subclass = USB uhci3@pci0:0:29:3: class=0x0c0300 card=0xff601179 chip=0x27cb8086 rev=0x02 hdr=0x00 class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0xff601179 chip=0x27cc8086 rev=0x02 hdr=0x00 class = serial bus subclass = USB pcib4@pci0:0:30:0: class=0x060401 card=0xff601179 chip=0x24488086 rev=0xe2 hdr=0x01 class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0xff601179 chip=0x27bc8086 rev=0x02 hdr=0x00 class = bridge subclass = PCI-ISA ahci0@pci0:0:31:2: class=0x010601 card=0xff601179 chip=0x27c18086 rev=0x02 hdr=0x00 class = mass storage subclass = SATA none1@pci0:0:31:3: class=0x0c0500 card=0xff601179 chip=0x27da8086 rev=0x02 hdr=0x00 class = serial bus subclass = SMBus ath0@pci0:7:0:0: class=0x028000 card=0xe8111113 chip=0x002b168c rev=0x01 hdr=0x00 class = network re0@pci0:9:0:0: class=0x020000 card=0xff601179 chip=0x813610ec rev=0x05 hdr=0x00 class = network subclass = ethernet --------------040205070608060603040802 Content-Type: text/plain; name="vmstat" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="vmstat" interrupt total rate irq1: atkbd0 1572 1 irq9: acpi0 572 0 irq23: uhci0 ehci0 2111 1 cpu0: timer 2916673 1999 irq256: re0 2868 1 irq257: ahci0 126 0 cpu1: timer 2916486 1998 Total 5840408 4003 --------------040205070608060603040802--