Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 16 Jun 1995 12:56:48 +0300
From:      Gennady Sorokopud <gena@NetVision.net.il>
To:        "Serge A. Krashakov" <sakr@itp.ac.ru>
Cc:        <esser@zpr.uni-koeln.de>, <hackers@freebsd.org>, <questions@freebsd.org>
Subject:   RE: Compaq Prosignia 300
Message-ID:  <XFMail.950616130626.gena@NetVision.net.il>
In-Reply-To: <199506160928.NAA05065@itp.ac.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
Hmm...according to vendor info you have AMD PCI on-board
ethernet controller. I have one too. Seems like all Compaq Prosignia
is equipped with this card. Unfortunately FreeBSD don't have
dirver for it and i don't know where to find technical info
about this card so i can write one ( or at least try to do that)

Best regards.

In message <199506160928.NAA05065@itp.ac.ru> Serge A. Krashakov writes:
>Dear Stefan!
>
>Thank you for the help again.
>I could install FreeBSD-2.0.5 on Compaq, but it took much more time
>as I expected. The main problem was to create "true" installation
>boot diskette with new kernel and subsitute installed (other!) kernel
>to new (with patches).
>
>Could you advise me how installation diskettes to be created.
>
>But now I have another problem with this Compaq:
>It doesn't want to recognize built-in on-board Ethernet controller
>(unfortunately I doesn't know its type).
>
>Could anibody help me?
>
>The following is a boot message:
>
>Jun 16 12:04:18 test /kernel: FreeBSD 2.0.5-RELEASE #0: Fri Jun 16 11:52:30  1995
>Jun 16 12:04:18 test /kernel:     root@test.itp.ac.ru:/usr/src/sys/compile/COMPAQ
>Jun 16 12:04:18 test /kernel: CPU: 90-MHz Pentium 735\90 (Pentium-class CPU)
>Jun 16 12:04:18 test /kernel:   Origin = "GenuineIntel"  Id = 0x524  Stepping=4
>Jun 16 12:04:18 test /kernel:   Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
>Jun 16 12:04:18 test /kernel: real memory  = 16384000 (4000 pages)
>Jun 16 12:04:18 test /kernel: avail memory = 14954496 (3651 pages)
>Jun 16 12:04:18 test /kernel: Probing for devices on the ISA bus:
>Jun 16 12:04:18 test /kernel: sc0 at 0x60-0x6f irq 1 on motherboard
>Jun 16 12:04:18 test /kernel: sc0: VGA color <16 virtual consoles, flags=0x0>
>Jun 16 12:04:18 test /kernel: ed0 at 0x340-0x35f irq 5 on isa
>Jun 16 12:04:18 test /kernel: ed0: address 00:80:48:89:f1:3d, type NE2000 (16 bit) 
>Jun 16 12:04:19 test /kernel: mse0: wrong signature ff
>Jun 16 12:04:19 test /kernel: mse0 not found at 0x23c
>Jun 16 12:04:19 test /kernel: psm0 at 0x60-0x63 irq 12 on motherboard
>Jun 16 12:04:19 test /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa
>Jun 16 12:04:19 test /kernel: sio0: type 16550A
>Jun 16 12:04:19 test /kernel: lpt0 at 0x378-0x37f irq 7 on isa
>Jun 16 12:04:19 test /kernel: lpt0: Interrupt-driven port
>Jun 16 12:04:19 test /kernel: lp0: TCP/IP capable interface
>Jun 16 12:04:19 test /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
>Jun 16 12:04:19 test /kernel: fdc0: NEC 72065B
>Jun 16 12:04:19 test /kernel: fd0: 1.44MB 3.5in
>Jun 16 12:04:19 test /kernel: npx0 on motherboard
>Jun 16 12:04:19 test /kernel: npx0: INT 16 interface
>Jun 16 12:04:20 test /kernel: Probing for devices on the pci0 bus:
>Jun 16 12:04:20 test /kernel: 	configuration mode 1 allows 32 devices.
>Jun 16 12:04:20 test /kernel: pci0:0: vendor=0xe11, device=0x1000, class=old [not supported]
>Jun 16 12:04:20 test /kernel: 	map(10): mem32(3b370)
>Jun 16 12:04:20 test /kernel: 	map(14): mem32(175260)
>Jun 16 12:04:20 test /kernel: 	map(18): mem32(3b370)
>Jun 16 12:04:20 test /kernel: 	map(1c): mem32(1f470)
>Jun 16 12:04:20 test /kernel: 	map(20): io(10000e10)
>Jun 16 12:04:20 test /kernel: pci0:11: vendor=0x1022, device=0x2000, class=network [not supported]
>Jun 16 12:04:20 test /kernel: 	map(10): io(7000)
>Jun 16 12:04:20 test /kernel: ncr0 <ncr 53c810 scsi> rev 2 int a irq 10 on pci0:12
>Jun 16 12:04:20 test /kernel: pci_map_mem failed: device's memrange 0x2000000-0x20000ff is incompatible with its bridge's memrange 0x4000000-0xffffffff
>Jun 16 12:04:20 test /kernel: 	reg20: virtual=0xf2d5a000 physical=0x2000000 size=0x100
>Jun 16 12:04:20 test /kernel: ncr0: restart (scsi reset).
>Jun 16 12:04:20 test /kernel: ncr0 scanning for targets 0..6 (V2 pl21 95/03/21)
>Jun 16 12:04:20 test /kernel: (ncr0:0:0): 200ns (5 Mb/sec) offset 8.
>Jun 16 12:04:21 test /kernel: (ncr0:0:0): "COMPAQ ST12550N 3223" type 0 fixed SCSI 2
>Jun 16 12:04:21 test /kernel: sd0(ncr0:0:0): Direct-Access 
>Jun 16 12:04:21 test /kernel: sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
>Jun 16 12:04:21 test /kernel: 2006MB (4110000 512 byte sectors)
>Jun 16 12:04:21 test /kernel: (ncr0:5:0): "COMPAQ CD-ROM CR-503BCQ 1.1i" type 5 removable SCSI 2
>Jun 16 12:04:21 test /kernel: cd0(ncr0:5:0): CD-ROM 
>Jun 16 12:04:21 test /kernel: cd0(ncr0:5:0): NOT READY asc:3a,0 Medium not present
>Jun 16 12:04:21 test /kernel: can't get the size
>Jun 16 12:04:21 test /kernel: 
>Jun 16 12:04:21 test /kernel: pci0:15: vendor=0xe11, device=0x1, class=bridge [not supported]
>Jun 16 12:04:21 test /kernel: pci0: uses 256 bytes of memory from 2000000 upto 20000ff.
>Jun 16 12:04:21 test /kernel: pci0: uses 256 bytes of I/O space from 7100 upto 71ff.
>Jun 16 12:04:21 test /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
>Jun 16 12:04:21 test /kernel: sd0: start 63, end 1028159, size 1028097
>Jun 16 12:04:21 test /kernel: sd0d: start 0, end 4109999, size 4110000
>Jun 16 12:04:21 test /kernel: sd0: rejecting partition in BSD label: it isn't entirely within the slice
>Jun 16 12:04:22 test /kernel: sd0f: start 3084480, end 4080509, size 996030
>Jun 16 12:04:25 test login: ROOT LOGIN (root) ON ttyv0
>
>Thank you in advance,
>Serge Krashakov

--------
 Gennady B. Sorokopud - System programmer at NetVision Israel.
 E-Mail: gena@NetVision.net.il
 Homepage: http://www.netvision.net.il/~gena

 This message was sent at 06/16/95 13:06:27 by XF-Mail



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.950616130626.gena>