Date: Tue, 22 Aug 2000 14:17:54 +0100 (BST) From: Andrew Tulloch <andrew@cosa.uk-legal.net> To: strange@unicon.ru Cc: freebsd-questions@freebsd.org, freebsd-stable@freebsd.org Subject: Re: How can I obtain -stable for previous date ? Message-ID: <Pine.BSF.4.21.0008221413440.82630-100000@cosa.uk-legal.net> In-Reply-To: <200008221109.SAA22467@mix.unicon.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
I had a similar problem with a hard lock doing a buildworld over the weekend. Just turned out to be my machine being in a new desk and one side had got covered up so not getting enough ventilation and overheated it seems. Gave it a bit more room and its been fine. built world again afterwards and it worked fine :) Andrew Tulloch - Systems Administrator - Legalex Ltd andrew@cosa.uk-legal.net FreeBSD: The Power To Serve... On Tue, 22 Aug 2000 strange@unicon.ru wrote: > > I'm obtain -stable (RELENG_4) every 2 days via cvsup. > And do make world every time... > But after Aug 20, the system became unstable ;( > It locks on hard loading (hard HDD usage), > like a make release or even make buildworld ;( > No panic, no crashdump, nothing, full lock... > Just many HDD problems after hard reboot ;( > > How can I downgrade (build an previous stable) ? > What should I tell to cvsup to extract this sources ? > > And maybe there is another solve of this problem ? > I thing on hardware, change Ethernet card, HDD drives, memory... > Same problem occured. > > My hardware: > M/B Iwill DBD100 > 2xPIII (non overclocked !) freq 4.5 x 103 > 2x128Mb > Promise ATA66 and 3 Seagate ATA66 HDD > % dmesg > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.1-STABLE #1: Tue Aug 22 23:02:05 NOVST 2000 > root@:/usr/src/sys/compile/REMIX2 > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (463.91-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x673 Stepping = 3 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> > real memory = 268369920 (262080K bytes) > config> en apm0 > config> q > avail memory = 257503232 (251468K bytes) > Programming 24 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq 0 > FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 > Preloaded elf kernel "kernel" at 0xc02ec000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc02ec09c. > Pentium Pro MTRR support enabled > md0: Malloc disk > apm0: <APM BIOS> on motherboard > apm: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0 > atapci0: Busmastering DMA not enabled > pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 > Timecounter "PIIX" frequency 3579545 Hz > chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 > atapci1: <Promise ATA66 controller> port 0xe400-0xe43f,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 mem 0xdf200000-0xdf21ffff irq 16 at device 15.0 on pci0 > ata2: at 0xd400 on atapci1 > ata3: at 0xdc00 on atapci1 > pci0: <VGA-compatible display device> at 18.0 irq 18 > dc0: <Intel 21143 10/100BaseTX> port 0xe800-0xe87f mem 0xdf220000-0xdf2203ff irq 19 at device 19.0 on pci0 > dc0: Ethernet address: 00:00:1c:b5:52:8f > miibus0: <MII bus> on dc0 > amphy0: <Am79C873 10/100 media interface> on miibus0 > amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/16 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default > DUMMYNET initialized (000608) > SMP: AP CPU #1 Launched! > ad4: 29188MB <ST330630A> [59303/16/63] at ata2-master using UDMA66 > ad6: 29188MB <ST330630A> [59303/16/63] at ata3-master using UDMA66 > ad7: 14652MB <ST315323A> [29770/16/63] at ata3-slave using UDMA66 > Mounting root from ufs:/dev/ad4s1a > WARNING: / was not properly dismounted > > > WBR Strange Alex > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0008221413440.82630-100000>