Date: Sat, 25 Jul 2009 13:50:29 GMT From: Hennes Passmann <hennes@Stack.nl> To: freebsd-gnats-submit@FreeBSD.org Subject: www/137128: Submit: Motherboard output for web (Dell R300) Message-ID: <200907251350.n6PDoTfc007618@www.freebsd.org> Resent-Message-ID: <200907251400.n6PE07NN060889@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 137128 >Category: www >Synopsis: Submit: Motherboard output for web (Dell R300) >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Sat Jul 25 14:00:07 UTC 2009 >Closed-Date: >Last-Modified: >Originator: Hennes Passmann >Release: FreeBSD 7.2 (amd64) >Organization: >Environment: FreeBSD dragon-mk5.stack.nl 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 >Description: Here is the output from a Dell powerEdge R3000 for the list at http://www.freebsd.org/platforms/amd64/motherboards.html Motherboard and NICs work fine. The onboard graphics are not tested. -------------------------------------------------------------------------------------------- [root@dragon-mk5 ~]# pciconf -lv hostb0@pci0:0:0:0: class=0x060000 card=0x80868086 chip=0x65c08086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x65f78086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '(??) PCIe x8 Port 2-3' class = bridge subclass = PCI-PCI pcib2@pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x65e38086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '(??) PCIe x4 Port 3' class = bridge subclass = PCI-PCI pcib3@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x65f88086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '(??) PCIe x8 Port 4-5' class = bridge subclass = PCI-PCI pcib4@pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x65e58086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '(??) PCIe x4 Port 5' class = bridge subclass = PCI-PCI pcib5@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x65f98086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '(??) PCIe x8 Port 6-7' class = bridge subclass = PCI-PCI pcib6@pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x65e78086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '(??) PCIe x4 Port 7' class = bridge subclass = PCI-PCI hostb1@pci0:0:16:0: class=0x060000 card=0x020f1028 chip=0x65f08086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' device = '(??) FSB Registers' class = bridge subclass = HOST-PCI hostb2@pci0:0:16:1: class=0x060000 card=0x020f1028 chip=0x65f08086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' device = '(??) FSB Registers' class = bridge subclass = HOST-PCI hostb3@pci0:0:16:2: class=0x060000 card=0x020f1028 chip=0x65f08086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' device = '(??) FSB Registers' class = bridge subclass = HOST-PCI hostb4@pci0:0:17:0: class=0x060000 card=0x80868086 chip=0x65f18086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' device = '(??) Reserved Registers' class = bridge subclass = HOST-PCI hostb5@pci0:0:19:0: class=0x060000 card=0x80868086 chip=0x65f38086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' device = '(??) Reserved Registers' class = bridge subclass = HOST-PCI hostb6@pci0:0:21:0: class=0x060000 card=0x80868086 chip=0x65f58086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' device = '(??) DDR Channel 0 Registers' class = bridge subclass = HOST-PCI hostb7@pci0:0:22:0: class=0x060000 card=0x80868086 chip=0x65f68086 rev=0x90 hdr=0x00 vendor = 'Intel Corporation' device = '(??) DDR Channel 1 Registers' class = bridge subclass = HOST-PCI pcib7@pci0:0:28:0: class=0x060400 card=0x020f1028 chip=0x29408086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 1' class = bridge subclass = PCI-PCI pcib8@pci0:0:28:4: class=0x060400 card=0x020f1028 chip=0x29488086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 5' class = bridge subclass = PCI-PCI pcib9@pci0:0:28:5: class=0x060400 card=0x020f1028 chip=0x294a8086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) PCIe Root Port 6' class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0x020f1028 chip=0x29348086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x020f1028 chip=0x29358086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x020f1028 chip=0x29368086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB Universal Host Controller' class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0x020f1028 chip=0x293a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IB/IR/IH (ICH9 Family) USB2 Enhanced Host Controller' class = serial bus subclass = USB pcib10@pci0:0:30:0: class=0x060401 card=0x00000000 chip=0x244e8086 rev=0x92 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x29168086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801IR (ICH9R) LPC Interface Controller' class = bridge subclass = PCI-ISA mpt0@pci0:5:0:0: class=0x010000 card=0x1f0e1028 chip=0x00581000 rev=0x08 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' device = 'SAS 3000 series, 8-port with 1068E -StorPort' class = mass storage subclass = SCSI bge0@pci0:1:0:0: class=0x020000 card=0x020f1028 chip=0x165a14e4 rev=0x00 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5722 Gigabit Ethernet PCIe' class = network subclass = ethernet bge1@pci0:2:0:0: class=0x020000 card=0x020f1028 chip=0x165a14e4 rev=0x00 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5722 Gigabit Ethernet PCIe' class = network subclass = ethernet vgapci0@pci0:10:7:0: class=0x030000 card=0x020f1028 chip=0x515e1002 rev=0x02 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'Radeon ES1000 Radeon ES1000' class = display subclass = VGA NB: The MPT output is from a plugged in SAS card. -------------------------------------------------------------------------------------------- dmesg output Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC module_register: module g_label already exists! Module g_label failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU X3363 @ 2.83GHz (2833.34-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40ce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 4 usable memory = 12866060288 (12270 MB) avail memory = 12435804160 (11859 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <DELL PE_SC3> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 2.0 on pci0 pci3: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 3.0 on pci0 pci4: <PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci5: <ACPI PCI bus> on pcib3 mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xdfcec000-0xdfceffff,0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci5 mpt0: [ITHREAD] mpt0: MPI Version=1.5.18.0 mpt0: mpt_wait_req(6) timed out mpt0: port 0 enable timed out mpt0: failed to enable port 0 mpt0: unable to initialize IOC pcib4: <PCI-PCI bridge> at device 5.0 on pci0 pci6: <PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci7: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci8: <ACPI PCI bus> on pcib6 pcib7: <PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci9: <PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci1: <ACPI PCI bus> on pcib8 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa200> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5722 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:22:19:ab:67:af bge0: [ITHREAD] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci2: <ACPI PCI bus> on pcib9 bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa200> mem 0xdfef0000-0xdfefffff irq 17 at device 0.0 on pci2 miibus1: <MII bus> on bge1 brgphy1: <BCM5722 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:22:19:ab:67:b0 bge1: [ITHREAD] uhci0: <UHCI (generic) USB controller> port 0xcc80-0xcc9f irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 20 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 21 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfaffc00-0xdfafffff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on uhub3 uhub4: multiple transaction translators uhub4: 2 ports with 2 removable, self powered ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4 kbd2 at ukbd0 ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 4> on uhub3 uhub5: single transaction translator uhub5: 2 ports with 2 removable, self powered pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib10 vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 19 at device 7.0 on pci10 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 481b481b0600481b device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 481b481b0600481b device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 481b481b0600481b device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 481b481b0600481b device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcbfff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec The GEOM class LABEL is already loaded. da0 at mpt0 bus 0 target 0 lun 0 da0: <HP DF0146B8052 HPD1> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) da1 at mpt0 bus 0 target 1 lun 0 da0: <HP DF0146B8052 HPD1> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) da1 at mpt0 bus 0 target 1 lun 0 da1: <HP DF0146B8052 HPD1> Fixed Direct Access SCSI-5 dSeMvPi: cAeP CPdUa 1#: 13 0L0a.un0c0h0eMdB!/s transfers da1: Command Queueing Enabled da1: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! GEOM_LABEL: Label for provider da1 is label/dragon-d1. GEOM_MIRROR: Device mirror/dragon launched (1/1). -------------------------------------------------------------------------------------------- >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200907251350.n6PDoTfc007618>