Date: Mon, 05 Aug 1996 17:38:31 -0400 From: Brian Maloney <vond@vt.edu> To: freebsd-questions@freebsd.org Message-ID: <2.2.32.19960805213831.0068d76c@mail.vt.edu>
next in thread | raw e-mail | index | archive | help
Ok, I've been saving up a bunch of minor questions and now that I am about to go back to school and start REALLY using FreeBSD again, I better ask. 1) I recently changed the addresses of my Sound Blaster AWE32 PnP from port 0x240, IRQ 9, DMA 1, 5, to 220-5-1-5. These are MORE normal settings but the card doesn't work anymore... I used -c to reconfigure AND tried a kernel recompile.. Should I just change it back? 2) I have just added a 3com Ethernet card... The FAQ says the card will work with FreeBSD if I turn PnP off but there are no obvious jumpers or switches on the card... How do I turn PnP off? 3) I have a Conner (now Seagate) TapeStor 3200 tape drive as the second device on the floppy controller. Any chance of getting FreeBSD to recognize it? I added a proper ft line to the kernel and recompiled: tape ft0 at fdc0 drive 1 But it just detects 2 1.44 floppies. Ok, well thanks in advance for any help. +-----------------+-------------------------------------------------------+ |Brian Maloney |http://csugrad.cs.vt.edu/~bmaloney | |CS Major at +-------------------------------------------------------+ |*Virginia Tech* |"Besides, it is obviously a bunny rabbit." -- Data | |5027 Pritchard W |"Consult the Book of Armaments! Armaments 3:9-21..." | |(540) 232-1250 |"Everything in excess! Moderation is for monks!" -RAH | +-----------------+-------------------------------------------------------+
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2.2.32.19960805213831.0068d76c>