Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 02 Sep 2004 18:16:39 +0200
From:      Claude Buisson <cbuisson@nerim.net>
To:        freebsd-current@freebsd.org
Subject:   5.3-BETA2 do not boot (ata related)
Message-ID:  <41374767.4090809@nerim.net>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------010005020904090605040706
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

I have problems running recent 5.X on a Compaq Armada 3500 (no ACPI).

I used to get (same with 4.X):

ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt

for the cdrom, and the boot succeeded - see dmesg.20040723v

After a RELENG_5 cvsup on Aug 28, the message became:

ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR>
       error=1<ILLEGAL_LENGTH> LBA=0

and the boot stopped here.

I tried updating sys/dev/ata to -current, i.e. with:

ata-all.c       1.224
ata-all.h       1.82
ata-chipset.c   1.84
ata-disk.c      1.177
ata-dma.c       1.130
ata-lowlevel.c  1.46
ata-pci.c       1.88
ata-queue.c     1.34
atapi-cd.c      1.171

without any progress - see dmesg.curata (hand copied)

I reverted to the (approximatively) Aug 12 state, i.e. with:

ata-all.c       1.221
ata-all.h       1.80
ata-chipset.c   1.79
ata-disk.c      1.175
ata-dma.c       1.128
ata-lowlevel.c  1.43
ata-pci.c       1.87
ata-queue.c     1.31

to get a runnable system - see dmesg.20040831v

Note that the:
ATAPI_RESET time = 2910us
is only 210us with a non verbose boot.

The cdrom seems to be of the evil kind which is both master and slave, 
with no visible/accessible switch/jumper.

Any hope ?

Claude Buisson

--------------010005020904090605040706
Content-Type: text/plain;
 name="dmesg.20040723v"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.20040723v"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT-20040710 #0: Fri Jul 16 22:23:07 CEST 2004
    root@armada.home.tbf:/home/obj/home/src/sys/ARMADA5X
Preloaded elf kernel "/boot/kernel/kernel" at 0xc070b000.
Preloaded elf module "/boot/kernel/if_xe.ko" at 0xc070b1a4.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc070b250.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc070b2fc.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc070b3a8.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc070b454.
Preloaded elf module "/boot/kernel/apm.ko" at 0xc070b4fc.
Preloaded elf module "/boot/kernel/intpm.ko" at 0xc070b5a4.
Preloaded elf module "/boot/kernel/smbus.ko" at 0xc070b650.
Calibrating clock(s) ... i8254 clock: 1193213 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300012655 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201293824 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000bc67fff, 189014016 bytes (46146 pages)
avail memory = 191614976 (182 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x484
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4d37  Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID 5eb0110e
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base 50000000, size 28, enabled
found->	vendor=0x8086, dev=0x7192, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001020, size  4, enabled
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001000, size  5, enabled
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[90]: type 4, range 32, base 00000d00, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x02
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base 40000000, size 24, enabled
found->	vendor=0x102c, dev=0x00c0, revid=0x64
	bus=0, slot=8, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type 1, range 32, base 7fffe000, size 12, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 7ffff000, size 12, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1020
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0xd00-0xd0f irq 9 at device 7.3 on pci0
intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0xd00
intpm0: I/O mapped d00
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
intpm0: PM I/O mapped f00 
pci0: <display, VGA> at device 8.0 (no driver attached)
cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7fffe000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 
  0x10: 0x7fffe000 0x020000a0 0x20010100 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x00000000 0x00000007 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7ffff000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 
  0x10: 0x7ffff000 0x020000a0 0x20020200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x00000000 0x00000007 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 18 devices, largest 250 bytes
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x1
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 2 device ID PNP0501 (0105d041)
pnpbios: handle 3 device ID PNP0511 (1105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 4 device ID PNP0700 (0007d041)
ESS0006: adding io range 0x250-0x257, size=0x8, align=0
pnpbios: handle 5 device ID ESS0006 (06007316)
CPQb0ac: adding io range 0x220-0x22f, size=0x10, align=0
CPQb0ac: adding io range 0x388-0x38b, size=0x4, align=0
CPQb0ac: adding io range 0x330-0x331, size=0x2, align=0
CPQb0ac: adding irq mask 0x20
CPQb0ac: adding dma mask 0x2
CPQb0ac: adding dma mask 0x20
pnpbios: handle 6 device ID CPQb0ac (acb0110e)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 11 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 12 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x73, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 13 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 14 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000
PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0
PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0
PNP0c02: adding io range 0x62-0x63, size=0x2, align=0
PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0
PNP0c02: adding io range 0x74-0x74, size=0x1, align=0
PNP0c02: adding io range 0x75-0x75, size=0x1, align=0
PNP0c02: adding io range 0x76-0x76, size=0x1, align=0
PNP0c02: adding io range 0x77-0x77, size=0x1, align=0
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0
PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0
PNP0c02: adding io range 0xe2-0xe3, size=0x2, align=0
PNP0c02: adding io range 0x100-0x107, size=0x8, align=0
PNP0c02: adding io range 0x260-0x263, size=0x4, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xf00-0xf3f, size=0x40, align=0
PNP0c02: adding io range 0xd00-0xd0f, size=0x10, align=0
pnpbios: handle 18 device ID PNP0c02 (020cd041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 19 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> flags 0xc000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:0000c000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
isa_probe_children: probing PnP devices
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <Generic IRDA-compatible device> failed to probe on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
sbc0: <ESS ES1869 (Compaq OEM)> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq 5,1 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1869 detected, newspeed
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 1de000, 1000; 0xc987d000 -> 1de000
pcm0: sndbuf_setmap 1e5000, 1000; 0xc987e000 -> 1e5000
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1,0x260-0x263,0x100-0x107,0xe2-0xe3,0xe0-0xe1,0xa2-0xbf,0x93-0x9f,0x92,0x90-0x91,0x77,0x76,0x75,0x74,0x65-0x6f,0x62-0x63,0x44-0x5f,0x22-0x3f iomem 0xcb000-0xcbfff,0xfffc0000-0xffffffff on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0
Device configuration finished.
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 300012655 Hz quality -1000
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DBCA-206480/BC4OA82F> ATA-4 disk at ata0-master
ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:80 typ:11 s(CHS):1/0/1 e(CHS):278/239/63 s:15120 l:4203360
[1] f:00 typ:18 s(CHS):0/1/1 e(CHS):0/239/63 s:63 l:15057
[2] f:00 typ:165 s(CHS):279/0/1 e(CHS):838/239/63 s:4218480 l:8467200
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 7741440 length 2152120320 end 2159861759
GEOM: Configure ad0s2, start 32256 length 7709184 end 7741439
GEOM: Configure ad0s3, start 2159861760 length 4335206400 end 6495068159
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3b, start 134217728 length 536870912 end 671088639
GEOM: Configure ad0s3c, start 0 length 4335206400 end 4335206399
GEOM: Configure ad0s3d, start 671088640 length 872415232 end 1543503871
GEOM: Configure ad0s3e, start 1543503872 length 134217728 end 1677721599
GEOM: Configure ad0s3f, start 1677721600 length 2657484800 end 4335206399
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <UJDA150/1.02> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init

--------------010005020904090605040706
Content-Type: text/plain;
 name="dmesg.curata"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.curata"

Hand copied dmesg of latest kernel boot (with updated sys/dev/ata/)

atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f,0x376,0x170-0x177,
  0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reseved 0x10 bytes for rid 0x20 type 4 at 0x1020
ata0: channel #0 on atapci0
atapci0: Reseved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reseved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask 03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reseved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reseved 0x1 bytes for rid 0x1c type 4 at 0x3f6
ata1: reset tp1 mask 03 ostat0=51 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]

...

ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DBCA-206480/BC40A82F> ATA-4 disk at ata0-master
ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0

...

ata1: reiniting channel ..
ata1: reset tp1 mask 03 ostat0=00 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: resetting done ..
ata1-slave: FAILURE - ATAPI_IDENTIFY status=1<ERROR> error=1<ILLEGAL_LENGTH>
  LBA=0

--------------010005020904090605040706
Content-Type: text/plain;
 name="dmesg.20040831v"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.20040831v"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Tue Aug 31 14:58:45 CEST 2004
    toor@adele.home.tbf:/home/obj/home/src/sys/ARMADA5X
Preloaded elf kernel "/boot/kernel/kernel" at 0xc072a000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc072a1a4.
Preloaded elf module "/boot/kernel/if_xe.ko" at 0xc072a250.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc072a2fc.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc072a3a8.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc072a454.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc072a500.
Preloaded elf module "/boot/kernel/apm.ko" at 0xc072a5a8.
Preloaded elf module "/boot/kernel/intpm.ko" at 0xc072a650.
Preloaded elf module "/boot/kernel/smbus.ko" at 0xc072a6fc.
Calibrating clock(s) ... i8254 clock: 1193239 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 300011828 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201326592 (192 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000bc6ffff, 189046784 bytes (46154 pages)
avail memory = 191655936 (182 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x484
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:4d37  Rev = 1.0
pnpbios: Event flag at fe2f6
pnpbios: OEM ID 5eb0110e
Other BIOS signatures found:
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 40 00 
00 01 20 00 00 01 16 01 00 01 31 01 00 01 4a 01 
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
VESA: 16 mode(s) found
VESA: v2.0, 2048k memory, flags:0x1, mode table:0xc06e18c0 (1000040)
VESA: CHIPS 69000 Super VGA
VESA: Chips & Technologies, Inc. 69000 Display Controller 2
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base 50000000, size 28, enabled
found->	vendor=0x8086, dev=0x7192, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001020, size  4, enabled
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001000, size  5, enabled
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	map[90]: type 4, range 32, base 00000d00, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x02
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base 40000000, size 24, enabled
found->	vendor=0x102c, dev=0x00c0, revid=0x64
	bus=0, slot=8, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type 1, range 32, base 7fffe000, size 12, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 7ffff000, size 12, enabled
found->	vendor=0x104c, dev=0xac17, revid=0x02
	bus=0, slot=17, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1020
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
intpm0: <Intel 82371AB Power management controller> port 0xd00-0xd0f irq 9 at device 7.3 on pci0
intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0xd00
intpm0: I/O mapped d00
intpm0: intr IRQ 9 enabled revision 0
intpm0: [GIANT-LOCKED]
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
intpm0: PM I/O mapped f00 
pci0: <display, VGA> at device 8.0 (no driver attached)
cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7fffe000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 
  0x10: 0x7fffe000 0x020000a0 0x20010100 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x28049060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x00000801 0x00000007 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x7ffff000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac17104c 0x02100007 0x06070002 0x00824208 
  0x10: 0x7ffff000 0x020000a0 0x20020200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0xb0470e11 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x2804b060 0x00000000 0x00000000 0x01001c72 
  0x90: 0x61648280 0x00000000 0x00000000 0x00000000 
  0xa0: 0x7e210001 0x00800000 0x00000801 0x00000007 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 18 devices, largest 250 bytes
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 2 device ID PNP0501 (0105d041)
pnpbios: handle 3 device ID PNP0511 (1105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 4 device ID PNP0700 (0007d041)
ESS0006: adding io range 0x250-0x257, size=0x8, align=0
pnpbios: handle 5 device ID ESS0006 (06007316)
CPQb0ac: adding io range 0x220-0x22f, size=0x10, align=0
CPQb0ac: adding io range 0x388-0x38b, size=0x4, align=0
CPQb0ac: adding io range 0x330-0x331, size=0x2, align=0
CPQb0ac: adding irq mask 0x20
CPQb0ac: adding dma mask 0x2
CPQb0ac: adding dma mask 0x20
pnpbios: handle 6 device ID CPQb0ac (acb0110e)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 11 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 12 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x73, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 13 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 14 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000
PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0
PNP0c02: adding io range 0x44-0x5f, size=0x1c, align=0
PNP0c02: adding io range 0x62-0x63, size=0x2, align=0
PNP0c02: adding io range 0x65-0x6f, size=0xb, align=0
PNP0c02: adding io range 0x74-0x74, size=0x1, align=0
PNP0c02: adding io range 0x75-0x75, size=0x1, align=0
PNP0c02: adding io range 0x76-0x76, size=0x1, align=0
PNP0c02: adding io range 0x77-0x77, size=0x1, align=0
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa2-0xbf, size=0x1e, align=0
PNP0c02: adding io range 0xe0-0xe1, size=0x2, align=0
PNP0c02: adding io range 0xe2-0xe3, size=0x2, align=0
PNP0c02: adding io range 0x100-0x107, size=0x8, align=0
PNP0c02: adding io range 0x260-0x263, size=0x4, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xf00-0xf3f, size=0x40, align=0
PNP0c02: adding io range 0xd00-0xd0f, size=0x10, align=0
pnpbios: handle 18 device ID PNP0c02 (020cd041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 19 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> flags 0xc000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:0000c000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
isa_probe_children: probing PnP devices
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <Generic IRDA-compatible device> failed to probe on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
sbc0: <ESS ES1869 (Compaq OEM)> at port 0x330-0x331,0x388-0x38b,0x220-0x22f irq 5 drq 5,1 on isa0
sbc0: [GIANT-LOCKED]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1869 detected, newspeed
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap ffe000, 1000; 0xc991c000 -> ffe000
pcm0: sndbuf_setmap ffd000, 1000; 0xc991d000 -> ffd000
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1,0x260-0x263,0x100-0x107,0xe2-0xe3,0xe0-0xe1,0xa2-0xbf,0x93-0x9f,0x92,0x90-0x91,0x77,0x76,0x75,0x74,0x65-0x6f,0x62-0x63,0x44-0x5f,0x22-0x3f iomem 0xcb000-0xcbfff,0xfffc0000-0xffffffff on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0
Device configuration finished.
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 300011828 Hz quality -1000
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DBCA-206480/BC4OA82F> ATA-4 disk at ata0-master
ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:80 typ:11 s(CHS):1/0/1 e(CHS):278/239/63 s:15120 l:4203360
[1] f:00 typ:18 s(CHS):0/1/1 e(CHS):0/239/63 s:63 l:15057
[2] f:00 typ:165 s(CHS):279/0/1 e(CHS):838/239/63 s:4218480 l:8467200
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 7741440 length 2152120320 end 2159861759
GEOM: Configure ad0s2, start 32256 length 7709184 end 7741439
GEOM: Configure ad0s3, start 2159861760 length 4335206400 end 6495068159
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3b, start 134217728 length 536870912 end 671088639
GEOM: Configure ad0s3c, start 0 length 4335206400 end 4335206399
GEOM: Configure ad0s3d, start 671088640 length 872415232 end 1543503871
GEOM: Configure ad0s3e, start 1543503872 length 134217728 end 1677721599
GEOM: Configure ad0s3f, start 1677721600 length 2657484800 end 4335206399
pccard1: CIS version PC Card Standard 5.0
pccard1: CIS info: Xircom, CreditCard 10/100, CE3-10/100, 1.00
pccard1: Manufacturer code 0x105, product 0x10a
pccard1: function 0: network adapter, ccr addr 800 mask 3
pccard1: function 0, config table entry 1: I/O card; irq mask 8ebc; iomask 4, iospace 0-f; memspace 0-fff; mwait_required rdybsy_active io8 io16 irqpulse irqlevel powerdown
xe0: <Xircom CreditCard 10/100> at port 0x100-0x10f irq 11 function 0 config 1 on pccard1
xe0: [GIANT-LOCKED]
xe0: Xircom CreditCard 10/100, version 0x45/0x04, 100Mbps capable
xe0: bpf attached
xe0: Ethernet address: 00:80:c7:7a:d2:73
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-slave: FAILURE - ATAPI_IDENTIFY no interrupt
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ATAPI_RESET time = 2910us
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <UJDA150/1.02> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init

--------------010005020904090605040706--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41374767.4090809>