Date: Sat, 12 May 2001 03:44:34 -0300 (EST) From: Paje da Oca <root@maloca.oca.org.br> To: Dan Nelson <dnelson@emsphone.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Can FreeBSD handle SCSI tape? Message-ID: <Pine.BSF.4.21.0105120331040.9580-100000@maloca.oca.org.br> In-Reply-To: <20010511124111.C2528@dan.emsphone.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Dan,
Thanks for your reply.
You suggested:
> what does "camcontrol inq sa0" print, and are there any interesing
> errors in /var/log/messages?
The result of the suggested command was:
baru# camcontrol inq sa0
pass1: <ARCHIVE Python 06408-XXX 8130> Removable Sequential Access
SCSI-3 device
pass1: Serial Number HJ06X68
pass1: 20.000MB/s transfers (20.000MHz, offset 15)
Unfortunately, I don't know if that is what's expected or not.
As to /var/log/messages, the relevant messages are reproduced
bellow.
Thanks for your help,
Leonardo
BOOT MESSAGES: (Error messages follow)
==============
May 10 23:35:54 baru /kernel: ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xfcfff000-0xfcffffff irq 10 at device 6.0 on pci1
May 10 23:35:54 baru /kernel: aic7880: Single Channel A, SCSI Id=7, 16/255 SCBs
May 10 23:35:54 baru /kernel: aac0: <Dell PERC 2/Si> mem 0xf4000000-0xf7ffffff irq 14 at device 2.1 on pci0
May 10 23:35:54 baru /kernel: aac0: i960RX 100MHz, 62MB total memory, no battery support (5)
May 10 23:35:54 baru /kernel: aac0: Kernel 2.1-3, S/N fafaf00199b001d0
May 10 23:35:55 baru /kernel: Waiting 15 seconds for SCSI devices to settle
May 10 23:35:55 baru /kernel: aacd0: <RAID 5> on aac0
May 10 23:35:55 baru /kernel: aacd0: 4096MB (8389120 sectors)
May 10 23:35:55 baru /kernel: aacd1: <RAID 5> on aac0
May 10 23:35:55 baru /kernel: aacd1: 82682MB (169333120 sectors)
May 10 23:35:55 baru /kernel: sa0 at ahc0 bus 0 target 6 lun 0
May 10 23:35:55 baru /kernel: sa0: <ARCHIVE Python 06408-XXX 8130> Removable Sequential Access SCSI-3 device
May 10 23:35:55 baru /kernel: sa0: 20.000MB/s transfers (20.000MHz, offset 15)
May 10 23:35:55 baru /kernel: no devsw (majdev=0 bootdev=0xa0200000)
May 10 23:35:56 baru /kernel: cd0 at ahc0 bus 0 target 5 lun 0
May 10 23:35:56 baru /kernel: cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device
May 10 23:35:56 baru /kernel: cd0: 20.000MB/s transfers (20.000MHz, offset 15)
MESSAGES AFTER TRYING TO USE THE TAPE: (tar c whatever)
=====================================
May 10 23:39:53 baru /kernel: (sa0:ahc0:0:6:0): SCB 0x2 - timed out while idle, SEQADDR == 0x7
May 10 23:39:53 baru /kernel: STACK == 0x3, 0x180, 0x140, 0x0
May 10 23:39:53 baru /kernel: SXFRCTL0 == 0x80
May 10 23:39:53 baru /kernel: ahc0: Dumping Card State at SEQADDR 0x7
May 10 23:39:53 baru /kernel: SCSISEQ = 0x12, SBLKCTL = 0x0, SSTAT0 0x5
May 10 23:39:53 baru /kernel: SCB count = 10
May 10 23:39:53 baru /kernel: Kernel NEXTQSCB = 4
May 10 23:39:53 baru /kernel: Card NEXTQSCB = 4
May 10 23:39:53 baru /kernel: QINFIFO entries:
May 10 23:39:53 baru /kernel: Waiting Queue entries:
May 10 23:39:53 baru /kernel: Disconnected Queue entries: 0:2
May 10 23:39:53 baru /kernel: QOUTFIFO entries:
May 10 23:39:53 baru /kernel: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
May 10 23:39:53 baru /kernel: Pending list: 2
May 10 23:39:53 baru /kernel: Kernel Free SCB list: 3 5 6 7 8 9 1 0
May 10 23:39:53 baru /kernel: Untagged Q(6): 2
May 10 23:39:53 baru /kernel: (sa0:ahc0:0:6:0): Queuing a BDR SCB
May 10 23:39:53 baru /kernel: (sa0:ahc0:0:6:0): Bus Device Reset Message Sent
May 10 23:39:53 baru /kernel: (sa0:ahc0:0:6:0): no longer in timeout, status = 34b
May 10 23:39:53 baru /kernel: ahc0: Bus Device Reset on A:6. 1 SCBs aborted
May 10 23:39:53 baru /kernel: (sa0:ahc0:0:6:0): SCB 0x2 - timed out while idle, SEQADDR == 0x7
May 10 23:39:53 baru /kernel: STACK == 0x3, 0x180, 0x140, 0xcd
May 10 23:39:54 baru /kernel: SXFRCTL0 == 0x80
May 10 23:39:54 baru /kernel: ahc0: Dumping Card State at SEQADDR 0x7
May 10 23:39:54 baru /kernel: SCSISEQ = 0x12, SBLKCTL = 0x0, SSTAT0 0x5
May 10 23:39:54 baru /kernel: SCB count = 10
May 10 23:39:54 baru /kernel: Kernel NEXTQSCB = 4
May 10 23:39:54 baru /kernel: Card NEXTQSCB = 4
May 10 23:39:54 baru /kernel: QINFIFO entries:
May 10 23:39:54 baru /kernel: Waiting Queue entries:
May 10 23:39:54 baru /kernel: Disconnected Queue entries: 0:2
May 10 23:39:54 baru /kernel: QOUTFIFO entries:
May 10 23:39:54 baru /kernel: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
May 10 23:39:54 baru /kernel: Pending list: 2
May 10 23:39:54 baru /kernel: Kernel Free SCB list: 3 5 6 7 8 9 1 0
May 10 23:39:54 baru /kernel: Untagged Q(6): 2
May 10 23:39:54 baru /kernel: (sa0:ahc0:0:6:0): Queuing a BDR SCB
May 10 23:39:54 baru /kernel: (sa0:ahc0:0:6:0): Bus Device Reset Message Sent
May 10 23:39:54 baru /kernel: (sa0:ahc0:0:6:0): no longer in timeout, status = 34b
May 10 23:39:54 baru /kernel: ahc0: Bus Device Reset on A:6. 1 SCBs aborted
May 10 23:40:00 baru /kernel: (sa0:ahc0:0:6:0): SCB 0x2 - timed out while idle, SEQADDR == 0x7
May 10 23:40:00 baru /kernel: STACK == 0x3, 0x180, 0x140, 0xcd
May 10 23:40:00 baru /kernel: SXFRCTL0 == 0x80
May 10 23:40:00 baru /kernel: ahc0: Dumping Card State at SEQADDR 0x7
May 10 23:40:00 baru /kernel: SCSISEQ = 0x12, SBLKCTL = 0x0, SSTAT0 0x5
May 10 23:40:00 baru /kernel: SCB count = 10
May 10 23:40:00 baru /kernel: Kernel NEXTQSCB = 4
May 10 23:40:01 baru /kernel: Card NEXTQSCB = 4
May 10 23:40:01 baru /kernel: QINFIFO entries:
May 10 23:40:01 baru /kernel: Waiting Queue entries:
May 10 23:40:01 baru /kernel: Disconnected Queue entries: 0:2
May 10 23:40:01 baru /kernel: QOUTFIFO entries:
May 10 23:40:01 baru /kernel: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
May 10 23:40:01 baru /kernel: Pending list: 2
May 10 23:40:01 baru /kernel: Kernel Free SCB list: 3 5 6 7 8 9 1 0
May 10 23:40:01 baru /kernel: Untagged Q(6): 2
May 10 23:40:01 baru /kernel: (sa0:ahc0:0:6:0): Queuing a BDR SCB
May 10 23:40:01 baru /kernel: (sa0:ahc0:0:6:0): Bus Device Reset Message Sent
May 10 23:40:01 baru /kernel: (sa0:ahc0:0:6:0): no longer in timeout, status = 34b
May 10 23:40:01 baru /kernel: ahc0: Bus Device Reset on A:6. 1 SCBs aborted
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0105120331040.9580-100000>