Date: Mon, 18 Aug 2003 15:25:47 +0200 From: Radko Keves <rado@studnet.sk> To: current@FreeBSD.org Subject: Re: TESTERS WANTED for ATAng preview 2 Message-ID: <20030818132547.GA43982@studnet.sk> In-Reply-To: <200308162006.h7GK62Su035801@spider.deepcore.dk> References: <200308162006.h7GK62Su035801@spider.deepcore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
--6c2NcOVqGQ03X4Wi
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
;), Sat, Aug 16, 2003 at 10:06:02PM +0200, Soeren Schmidt said that
> The story continues with Preview 2 - from the README:
>
> Now the functionality is almost equal to that of stock ATA, I'm getting
> close to being ready to expose this on the -current users, so please
> give this a go to shake out the last nasties.
> I've fixed alot of minor issue that testers have reported back (thanks!!),
> plus a few chipset issued found over the last days.
>
> Grap the latest from ftp.deepcore.dk/pub/ATAng and apply the diff files
> to your src tree, remove the contents of sys/dev/ata and extract the
> ATAng-*tgz file there, then do the usual drill to get a new kernel...
>
> As usual it might kill your dog, abduct your kids and whatnot :)
>
> Let me know how this works out for you!
> -Søren
hi
sorry if i'm late :)
i attache my dmesg from:
Mon May 19 15:01:33 CEST 2003
(last when kernel found my disks)
current driver from cvs doesn't find any disk -- when try to mount root
:(
and when i use driver from ftp.deepcore.dk/pub/ATAng have found disks ...
but write message:
WARNING: READ_DMA unable to allocate interrupt
"every second", and system was booting in the background, bud when try
to start shell i see only this message on the console
if i can help tell me what to do ...
--
Archeologists near mount Sinai have discovered what is believed to be a
missing page from the Bible. The page is currently being carbon dated
in Bonn. If genuine it belongs at the beginning of the Bible and is
believed to read "To my darling Candy. All characters portrayed
within this book are fictitous and any resemblance to persons living
or dead is purely coincidental." The page has been universally
condemned by church leaders.
RED DWARF Series II Episode 2, "Better Than Life"
-
R
--6c2NcOVqGQ03X4Wi
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA #32: Mon May 19 15:01:33 CEST 2003
root@kripel:/usr/src/sys/i386/compile/angel
Preloaded elf kernel "/boot.rado/kernel/kernel" at 0xc04f8000.
Calibrating clock(s) ... i8254 clock: 1193063 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 927110285 Hz
Timecounter "TSC" frequency 927110285 Hz
CPU: Intel Pentium III (927.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000051f000 - 0x000000000fb59fff, 258191360 bytes (63035 pages)
avail memory = 255422464 (243 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xeca00 (c00eca00) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xeca00+0x1047
pnpbios: Found PnP BIOS data at 0xc00fe1c0
pnpbios: Entry = f0000:676c Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00ede90
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 15 A 0x01 3 4 5 7 10 11 14 15
embedded 0 15 B 0xff none
embedded 0 15 C 0xff none
embedded 0 15 D 0xff none
slot 1 5 2 A 0x13 3 4 5 7 10 11 14 15
slot 1 5 2 B 0x14 3 4 5 7 10 11 14 15
slot 1 5 2 C 0x15 3 4 5 7 10 11 14 15
slot 1 5 2 D 0x15 3 4 5 7 10 11 14 15
slot 2 5 1 A 0x10 3 4 5 7 10 11 14 15
slot 2 5 1 B 0x11 3 4 5 7 10 11 14 15
slot 2 5 1 C 0x12 3 4 5 7 10 11 14 15
slot 2 5 1 D 0x12 3 4 5 7 10 11 14 15
slot 3 0 1 A 0x16 3 4 5 7 10 11 14 15
slot 3 0 1 B 0x17 3 4 5 7 10 11 14 15
slot 3 0 1 C 0x18 3 4 5 7 10 11 14 15
slot 3 0 1 D 0x19 3 4 5 7 10 11 14 15
slot 4 0 2 A 0x1a 3 4 5 7 10 11 14 15
slot 4 0 2 B 0x1b 3 4 5 7 10 11 14 15
slot 4 0 2 C 0x1a 3 4 5 7 10 11 14 15
slot 4 0 2 D 0x1b 3 4 5 7 10 11 14 15
slot 5 0 3 A 0x1c 3 4 5 7 10 11 14 15
slot 5 0 3 B 0x1d 3 4 5 7 10 11 14 15
slot 5 0 3 C 0x1c 3 4 5 7 10 11 14 15
slot 5 0 3 D 0x1d 3 4 5 7 10 11 14 15
slot 6 0 4 A 0x1e 3 4 5 7 10 11 14 15
slot 6 0 4 B 0x1f 3 4 5 7 10 11 14 15
slot 6 0 4 C 0x1e 3 4 5 7 10 11 14 15
slot 6 0 4 D 0x1f 3 4 5 7 10 11 14 15
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1011, dev=0x0024, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00002000, size 7, enabled
map[14]: type 1, range 32, base b1500000, size 7, enabled
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[90]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1166, dev=0x0200, revid=0x51
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002080, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base b1400000, size 12, enabled
found-> vendor=0x1166, dev=0x0220, revid=0x04
bus=0, slot=15, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=5
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x1000-0x1fff
pcib1: memory decode 0xb0000000-0xb13fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base b1100000, size 12, enabled
map[14]: type 4, range 32, base 00001800, size 6, enabled
map[18]: type 1, range 32, base b1000000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=1, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0000000, size 24, enabled
map[14]: type 4, range 32, base 00001000, size 8, enabled
map[18]: type 1, range 32, base b1200000, size 12, enabled
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=6, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 1, range 32, base b1300000, size 8, enabled
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
bus=1, slot=7, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type 4, range 32, base 00001850, size 3, enabled
map[14]: type 4, range 32, base 00001860, size 2, enabled
map[18]: type 4, range 32, base 00001858, size 3, enabled
map[1c]: type 4, range 32, base 00001864, size 2, enabled
map[20]: type 4, range 32, base 00001840, size 4, enabled
found-> vendor=0x1095, dev=0x0649, revid=0x02
bus=1, slot=8, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0145, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1800-0x183f mem 0xb1000000-0xb10fffff,0xb1100000-0xb1100fff irq 11 at device 5.0 on pci1
pcib1: device fxp0 requested decoded memory range 0xb1100000-0xb1100fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:50:8b:e9:e8:92
fxp0: PCI IDs: 8086 1229 0e11 b134 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pci1: <display, VGA> at device 6.0 (no driver attached)
pci1: <base peripheral> at device 7.0 (no driver attached)
atapci0: <CMD 649 UDMA100 controller> port 0x1840-0x184f,0x1864-0x1867,0x1858-0x185f,0x1860-0x1863,0x1850-0x1857 irq 10 at device 8.0 on pci1
pcib1: device atapci0 requested decoded I/O range 0x1840-0x184f
pcib1: device atapci0 requested decoded I/O range 0x1850-0x1857
pcib1: device atapci0 requested decoded I/O range 0x1860-0x1863
pcib1: device atapci0 requested decoded I/O range 0x1862-0x1862
ata2: pre reset mask=03 ostat0=50 ostat2=51
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: after reset mask=03 stat0=50 stat1=50
ata2-master: ATA 01 a5
ata2-slave: ATA 01 a5
ata2: devices=03
ata2: at 0x1850 on atapci0
pcib1: device atapci0 requested decoded I/O range 0x1858-0x185f
pcib1: device atapci0 requested decoded I/O range 0x1864-0x1867
pcib1: device atapci0 requested decoded I/O range 0x1866-0x1866
ata3: pre reset mask=03 ostat0=7f ostat2=7f
ata3-master: ATAPI 7f 7f
ata3-slave: ATAPI 7f 7f
ata3: after reset mask=03 stat0=7f stat1=7f
ata3-master: ATA 25 7f
ata3-slave: ATA 25 7f
ata3: devices=00
ata3: at 0x1858 on atapci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 0xb1500000-0xb150007f irq 11 at device 4.0 on pci0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:04:76:9d:0c:cd
xl0: media options word: a
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
isab0: <PCI-ISA bridge> port 0xfc00-0xfc0f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks ROSB4 UDMA33 controller> port 0x2080-0x208f at device 15.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=01
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=00 stat1=00
ata0-slave: ATA 04 a5
ata0: devices=06
ata0: at 0x1f0 irq 14 on atapci1
ata1: pre reset mask=03 ostat0=20 ostat2=30
ata1-master: ATAPI 20 20
ata1-slave: ATAPI 30 30
ata1: after reset mask=03 stat0=20 stat1=30
ata1-master: ATA 25 25
ata1-slave: ATA 25 25
ata1: devices=00
ata1: at 0x170 irq 15 on atapci1
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib5: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 5 on motherboard
pci5: <PCI bus> on pcib5
pci5: physical bus=5
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 16 devices, largest 251 bytes
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77d, size=0x6, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: adding irq mask 0x8
pnpbios: handle 4 device ID PNP0501 (0105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 5 device ID PNP0700 (0007d041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xd3000-0xd3fff, size=0x1000
pnpbios: handle 6 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding irq mask 0x4
pnpbios: handle 8 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 9 device ID PNP0100 (0001d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 10 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 11 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 12 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 13 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 14 device ID PNP0f13 (130fd041)
pnpbios: handle 15 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0
PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0
PNP0c02: adding io range 0x208-0x20f, size=0x8, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0
PNP0c02: adding io range 0xc06-0xc07, size=0x2, align=0
PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xf800-0xf81f, size=0x20, align=0
PNP0c02: adding io range 0xf820-0xf83f, size=0x20, align=0
PNP0c02: adding io range 0xf840-0xf85f, size=0x20, align=0
PNP0c02: adding io range 0xf860-0xf87f, size=0x20, align=0
PNP0c02: adding io range 0xfa00-0xfa1f, size=0x20, align=0
PNP0c02: adding io range 0xfa20-0xfa3f, size=0x20, align=0
PNP0c02: adding io range 0xfc00-0xfc0f, size=0x10, align=0
PNP0c02: adding io range 0xfe00-0xfe1f, size=0x20, align=0
PNP0c02: adding io range 0xfe20-0xfe3f, size=0x20, align=0
PNP0c02: adding io range 0xfe40-0xfe5f, size=0x20, align=0
PNP0c02: adding io range 0xfe60-0xfe7f, size=0x20, align=0
pnpbios: handle 17 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe8000-0xeffff,0xd2000-0xdcfff,0xd0000-0xd07ff,0xc8000-0xcffff,0xc0000-0xc7fff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0xd3000-0xd3fff,0xfff80000-0xffffffff,0x110000-0x1000ffff,0xf0000-0x10ffff,0-0x9ffff on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
ata0-slave: timeout waiting for interrupt
ata0-slave: ATA identify failed
ad4: success setting UDMA100 on CMD 649 chip
ad4: <WDC WD400BB-00CLB0/05.04E05> ATA-5 disk at ata2-master
ad4: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
ad4: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad4
ar: FreeBSD check1 failed
ad5: success setting UDMA100 on CMD 649 chip
ad5: <WDC WD400BB-00CLB0/05.04E05> ATA-5 disk at ata2-slave
ad5: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA100
ad5: piomode=12 dmamode=34 udmamode=69 cblid=1
ar: FreeBSD check1 failed
ata0-master: piomode=12 dmamode=34 udmamode=-1 dmaflag=1
ata0-master: success setting PIO4 on ServerWorks ROSB4 chip
ata0-master: <Compaq CRD-8402B/1.03> - NO DRIVER!
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 40015954944 end 40015987199
GEOM: new disk ad5
GEOM: Configure ad4s1a, start 28991029248 length 11024925696 end 40015954943
GEOM: Configure ad4s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad4s1e, start 0 length 2147483648 end 2147483647
GEOM: Configure ad4s1f, start 2147483648 length 5368709120 end 7516192767
GEOM: Configure ad4s1g, start 7516192768 length 21474836480 end 28991029247
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad5s1, start 32256 length 40015954944 end 40015987199
GEOM: Configure ad5s1a, start 20401094656 length 3221225472 end 23622320127
GEOM: Configure ad5s1b, start 2147483648 length 2147483648 end 4294967295
GEOM: Configure ad5s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad5s1d, start 23622320128 length 16393634816 end 40015954943
GEOM: Configure ad5s1e, start 0 length 2147483648 end 2147483647
GEOM: Configure ad5s1f, start 4294967296 length 5368709120 end 9663676415
GEOM: Configure ad5s1g, start 9663676416 length 5368709120 end 15032385535
GEOM: Configure ad5s1h, start 15032385536 length 5368709120 end 20401094655
Mounting root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
--6c2NcOVqGQ03X4Wi--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030818132547.GA43982>