Date: Tue, 26 Jun 2007 18:31:30 -0700 From: Julian Elischer <julian@elischer.org> To: Nikolay Pavlov <quetzal@zone3000.net>, Alexander Motin <mav@freebsd.org>, FreeBSD Net <freebsd-net@freebsd.org>, mpd-users@lists.sourceforge.net Subject: Re: Mpd-4.2 released. Message-ID: <4681BDF2.5020400@elischer.org> In-Reply-To: <20070627005739.GA80825@zone3000.net> References: <468135BF.8010407@freebsd.org> <20070626214936.GC79335@zone3000.net> <4681A062.9040009@freebsd.org> <20070627005739.GA80825@zone3000.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Nikolay Pavlov wrote:
> On Wednesday, 27 June 2007 at 2:25:22 +0300, Alexander Motin wrote:
>> Nikolay Pavlov wrote:
>>> This is probably a new feature request, but is this possible to create
>>> some kind of VirtualTemplate interface like it is in Cisco access
>>> routers. Currently i have to configure bunch of different ng interfaces
>>> for every kind user. However on my Cisco 7206VXR i can bundle physical
>>> link together with VirtaulTemplate interface in one vpdn-group config
>>> like this:
>>> And all the ppp interfaces for all users will use this configuration
>>> as a template.
>> Yes, I am thinking about that. That is not trivial change. It will require changing all internal model from static to the dynamic one. But that change also should give many other
>> bonuses so I would like to try.
>>
>> One of problems is more or less new config file syntax required. I have very limited cisco experience, so it is difficult for me to adopt their model to mpd, but I would not like
>> to reinvent a wheel. I will be grateful for any ideas/examples of how do you see that.
>>
>>
I am not sure that people know how to use the 'include' syntax in mpd.
i have not used it for a long time but I do remember that my setups were very simple,
because I used a kind of template entry to hold all teh common stuff.
ah here it is.. in this example I use 'load' to save lots of typing..
tun_standard:
set link yes acfcomp protocomp
set link no pap
set link no chap
set link keep-alive 2 15
set link mru 900
set link mtu 900
# set link bandwidth 1440000
############### per-link settings #################
vpn-site1:
new -i ng0 vpn-site1 site1-ISP1 site1-ISP2
set iface addrs 10.12.1.24 10.12.1.10
set iface route 192.168.10.0/24
set ipcp ranges 10.12.1.24/32 10.12.1.10/32
load vpn_standard
link site1-ISP1
load tun_standard
link site1-ISP2
load tun_standard
open
vpn-site2:
new -i ng1 vpn-site2 site2-ISP1 site2-ISP2
set iface addrs 10.12.1.24 10.12.1.20
set iface route 192.168.20.0/24
set ipcp ranges 10.12.1.24/32 10.12.1.20/32
load vpn_standard
link site2-ISP1
load tun_standard
link site2-ISP2
load tun_standard
open
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4681BDF2.5020400>