Date: Fri, 20 Jun 2003 17:05:34 -0400 From: Jerry Hicks <gehicks@alltel.net> To: Claudiu Bichir <claudiubichir@yahoo.com> Cc: freebsd-questions@freebsd.org Subject: Re: MODEM Message-ID: <EEDAF9CB-A362-11D7-9B09-0030657B5F1E@alltel.net> In-Reply-To: <20030620205926.42897.qmail@web41302.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
We got it the first time :-) Hrm, you are aware that 5.0 is an old developer-only release? I wouldn't be surprised if the USB code in that release was in rough shape. You probably really want FreeBSD-4.8 (or RELENG_4) Cheers, Jerry Hicks gehicks@alltel.net I'm still On Friday, June 20, 2003, at 04:59 PM, Claudiu Bichir wrote: > I have an Aztech UM9800 external modem but I don't know how to > configure it to work with FreeBSD.When my system boots I see > something like "ugen0:SMElectronics Communicator bla bla", I think > this is my modem ... > If anybody would like to help me configuring my modem to work with > FreeBSD I would appreciate that. I cannot use ppp ... > after I type "set device /dev/ugen0","set speed 115200","enable dns" > and "term" it says something like ... "ugenpoll: no edesc"(two times), > don't know why. > There is also a dial-up tool in KDE 3.0 but after I hit "Connect" > the whole system doesn't respond anymore and I must reboot it. > I hope my modem works with freebsd. > > dmesg: > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.0-RELEASE #0: Fri Jun 20 20:55:07 EEST 2003 > root@BSD:/usr/src/sys/i386/compile/BICHIR > Preloaded elf kernel "/boot/kernel/kernel" at 0xc04d0000. > Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc04d00a8. > Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04d015c. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04d0208. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 949972222 Hz > CPU: AMD Athlon(tm) Processor (949.97-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xffffffffc0440000<RSVD,AMIE,DSP,3DNow!> > real memory = 268369920 (255 MB) > avail memory = 255696896 (243 MB) > Initializing GEOMetry subsystem > Pentium Pro MTRR support enabled > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <VIA694 AWRDACPI> on motherboard > ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 > Using $PIR table, 7 entries at 0xc00fddc0 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-safe" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port > 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on > acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem > 0xd8000000-0xdbffffff at device 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device > 7.1 on pci0 > atapci0: Correcting VIA config for southbridge data corruption bug > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device > 7.2 on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ugen0: STMicroelectronics USB Communicator, rev 1.00/2.00, addr 2 > ulpt0: Hewlett-Packard DeskJet 3820, rev 1.10/1.00, addr 3, iclass 7/1 > ulpt0: using bi-directional mode > uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device > 7.3 on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached) > pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff > irq 10 at device 7.5 on pci0 > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > ppc0 port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > orm0: <Option ROM> at iomem 0xcc000-0xcffff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounters tick every 10.000 msec > acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% > ad0: DMA limited to UDMA33, non-ATA66 cable or device > ad0: 19595MB <QUANTUM FIREBALLP AS20.5> [39813/16/63] at ata0-master > UDMA33 > acd0: CDROM <54X CD-ROM> at ata0-slave PIO4 > acd1: CD-RW <MSI CD-RW MS-8348> at ata1-slave PIO4 > Mounting root from ufs:/dev/ad0s2a > <----------------dmesg end----------------> > > ################################################################# > # PPP Sample Configuration File > # Originally written by Toshiharu OHNO > # Simplified 5/14/1999 by wself@cdrom.com > # > # See /usr/share/examples/ppp/ for some examples > # > # $FreeBSD: src/etc/ppp/ppp.conf,v 1.8 2001/06/21 15:42:26 brian Exp $ > ################################################################# > default: > set log Phase Chat LCP IPCP CCP tun command > ident user-ppp VERSION (built COMPILATIONDATE) > # Ensure that "device" references the correct serial port > # for your modem. (cuaa0 = COM1, cuaa1 = COM2) > # > set device /dev/cuaa1 > set speed 115200 > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ > \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" > set timeout 180 # 3 minute idle timer (the default) > enable dns # request DNS info (for resolv.conf) > papchap: > # > # edit the next three lines and replace the items in caps with > # the values which have been assigned by your ISP. > # > set phone > set authname > set authkey > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > add default HISADDR # Add a (sticky) default route > <---------------ppp.conf end---------------> > > > # -- sysinstall generated deltas -- # Fri Jun 20 20:36:25 2003 > # Created: Fri Jun 20 20:36:25 2003 > # Enable network daemons for user convenience. > # Please make all changes to this file, not to /etc/defaults/rc.conf. > # This file now contains just the overrides from /etc/defaults/rc.conf. > font8x14="/usr/share/syscons/fonts/iso15-8x14.fnt" > font8x16="/usr/share/syscons/fonts/iso15-8x16.fnt" > font8x8="/usr/share/syscons/fonts/iso15-8x8.fnt" > hostname="BSD" > kern_securelevel_enable="NO" > linux_enable="YES" > moused_enable="YES" > scrnmap="NO" > sendmail_enable="NO" > sshd_enable="YES" > usbd_enable="YES" > <---------------rc.conf end---------------> > > Thank > you, > > Claudiu. > > > > --------------------------------- > Do you Yahoo!? > SBC Yahoo! DSL - Now only $29.95 per month! > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EEDAF9CB-A362-11D7-9B09-0030657B5F1E>