Date: Mon, 19 Feb 2001 08:06:47 -0500 From: "Person, Roderick" <personrp@ccbh.com> To: 'Bernd Walter' <ticso@cicely5.cicely.de> Cc: "'''freebsd-alpha@FreeBSD.ORG' ' '" <freebsd-alpha@FreeBSD.ORG> Subject: RE: this isn't fun any more.... Message-ID: <ABC15E2D8FBCD311B4A200805FA7D59B026041FC@1upmc-msx6.isdip.upmc.edu>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C09A74.D5F90708 Content-Type: text/plain; charset="iso-8859-1" when I start cu (cu -l/dev/cuaa0 -c5551212) it respondes no such device. and stays in the shell. AS you say, i did mention device errors, becuase up until I tried cu, there where no such error. Even though cu reports that there is no device when I try it the modems clear to send light comes on. But, the modem does seem to respond back to the pc. Roderick P. Person Programmer II personrp@ccbh.com "To hell with the public! I'm here to represent the people!" - A New Jersey state senator > -----Original Message----- > From: Bernd Walter [mailto:ticso@cicely5.cicely.de] > Sent: February 19, 2001 12:30 AM > To: Person, Roderick > Cc: '''freebsd-alpha@FreeBSD.ORG' ' ' > Subject: Re: this isn't fun any more.... > > > On Sun, Feb 18, 2001 at 09:06:27PM -0500, Person, Roderick wrote: > > i tried to use cu and a get no such device errors, it > doesn't matter if i > > use cuaa0 or cuaa1. So i did MAKEDEV cuaa0, MAKEDEV cuaa1. > the makedev > > returned no errors I even made cuaa3 and cuaa4 to see if > they would error no > > such luck. so apparently the modem is not responding back. > so i don't know > > where to go from here. > > I don't know what you mean with "get no such device errors". > As far as I can remember you never mentioned "device errors". > Do you get an echo from your modem when you type atz using cu? > If yes - do get an connection when you try atd<number>? > > > the modem is a us robotics 33.6 external, i have tried > various setting on > > the dip switch but np luck. any hints from anyone. > > > > -----Original Message----- > > From: Bernd Walter > > To: Person, Roderick > > Cc: ''freebsd-alpha@FreeBSD.ORG' ' > > Sent: 2/18/01 2:16 PM > > Subject: Re: this isn't fun any more.... > > > > On Sun, Feb 18, 2001 at 01:36:36PM -0500, Person, Roderick wrote: > > > ok, > > > > > > i've recompiled the kernel. com 2 is now accessiable through the > > serial > > > port, but still my external modem gets no dial tone. The > modem works, > > i used > > > it on my wife's pentium pro this morning. the phone line > is good, i > > have a > > > laptop connect to it now to write this email. > > > > > > I'm using 4.1 release on a noname axppci. > > > > > > the only error I recieve are: > > > ppp[189]: tun0: Warning: Chat script failed > > > dmesg | grep 'sio' > > > > > > tells me that > > > sio0 configured irq4 not in bitmap of probed irqs 0 > > > > > > Is that a problem. > > > > > > Also, does sound work in the alpha kernel, i used device pcm as in > > i386 > > > kernel but the makedevs fail. It seems to me that all the > > documentation is > > > i386 based...is there somewhere i can go to find alpha > specific info. > > > > > > > If a terminal programm (cu and tip are in the base system) receives > > the echo from the modem the comunication to the modem works. > > With your description of the problem no one can say if the > comunication > > to the modem failed or your chat script is wrong or your modem > > isn't plugged in or maybe your phone provider failt or ... > > > > Please use a terminalprogram and try the seriel connection > to the modem > > first before trying any complex things like starting chat scripts. > > > > -- > > B.Walter COSMO-Project > http://www.cosmo-project.de > > ticso@cicely.de Usergroup info@cosmo-project.de > > -- > B.Walter COSMO-Project > http://www.cosmo-project.de > ticso@cicely.de Usergroup info@cosmo-project.de > ------_=_NextPart_001_01C09A74.D5F90708 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version = 5.5.2650.12"> <TITLE>RE: this isn't fun any more....</TITLE> </HEAD> <BODY> <P><FONT SIZE=3D2>when I start cu (cu -l/dev/cuaa0 -c5551212) it = respondes no such device.</FONT> <BR><FONT SIZE=3D2>and stays in the shell. AS you say, i did mention = device errors, becuase up until I tried cu, there where no such error. = Even though cu reports that there is no device when I try it the modems = clear to send light comes on. But, the modem does seem to respond back = to the pc.</FONT></P> <P><FONT SIZE=3D2>Roderick P. Person</FONT> <BR><FONT SIZE=3D2>Programmer II</FONT> <BR><FONT SIZE=3D2>personrp@ccbh.com</FONT> </P> <BR> <P><FONT SIZE=3D2>"To hell with the public! I'm here to represent = the people!" </FONT> </P> <P><FONT SIZE=3D2> - A New Jersey state senator = </FONT> </P> <BR> <BR> <P><FONT SIZE=3D2>> -----Original Message-----</FONT> <BR><FONT SIZE=3D2>> From: Bernd Walter [<A = HREF=3D"mailto:ticso@cicely5.cicely.de">mailto:ticso@cicely5.cicely.de</= A>]</FONT> <BR><FONT SIZE=3D2>> Sent: February 19, 2001 12:30 AM</FONT> <BR><FONT SIZE=3D2>> To: Person, Roderick</FONT> <BR><FONT SIZE=3D2>> Cc: '''freebsd-alpha@FreeBSD.ORG' ' '</FONT> <BR><FONT SIZE=3D2>> Subject: Re: this isn't fun any more....</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> On Sun, Feb 18, 2001 at 09:06:27PM -0500, = Person, Roderick wrote:</FONT> <BR><FONT SIZE=3D2>> > i tried to use cu and a get no such = device errors, it </FONT> <BR><FONT SIZE=3D2>> doesn't matter if i</FONT> <BR><FONT SIZE=3D2>> > use cuaa0 or cuaa1. So i did MAKEDEV = cuaa0, MAKEDEV cuaa1. </FONT> <BR><FONT SIZE=3D2>> the makedev</FONT> <BR><FONT SIZE=3D2>> > returned no errors I even made cuaa3 and = cuaa4 to see if </FONT> <BR><FONT SIZE=3D2>> they would error no</FONT> <BR><FONT SIZE=3D2>> > such luck. so apparently the modem is not = responding back. </FONT> <BR><FONT SIZE=3D2>> so i don't know</FONT> <BR><FONT SIZE=3D2>> > where to go from here. </FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> I don't know what you mean with "get no = such device errors".</FONT> <BR><FONT SIZE=3D2>> As far as I can remember you never mentioned = "device errors".</FONT> <BR><FONT SIZE=3D2>> Do you get an echo from your modem when you = type atz using cu?</FONT> <BR><FONT SIZE=3D2>> If yes - do get an connection when you try = atd<number>?</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> > the modem is a us robotics 33.6 external, = i have tried </FONT> <BR><FONT SIZE=3D2>> various setting on</FONT> <BR><FONT SIZE=3D2>> > the dip switch but np luck. any hints from = anyone.</FONT> <BR><FONT SIZE=3D2>> > </FONT> <BR><FONT SIZE=3D2>> > -----Original Message-----</FONT> <BR><FONT SIZE=3D2>> > From: Bernd Walter</FONT> <BR><FONT SIZE=3D2>> > To: Person, Roderick</FONT> <BR><FONT SIZE=3D2>> > Cc: ''freebsd-alpha@FreeBSD.ORG' '</FONT> <BR><FONT SIZE=3D2>> > Sent: 2/18/01 2:16 PM</FONT> <BR><FONT SIZE=3D2>> > Subject: Re: this isn't fun any = more....</FONT> <BR><FONT SIZE=3D2>> > </FONT> <BR><FONT SIZE=3D2>> > On Sun, Feb 18, 2001 at 01:36:36PM -0500, = Person, Roderick wrote:</FONT> <BR><FONT SIZE=3D2>> > > ok,</FONT> <BR><FONT SIZE=3D2>> > > </FONT> <BR><FONT SIZE=3D2>> > > i've recompiled the kernel. com 2 is = now accessiable through the</FONT> <BR><FONT SIZE=3D2>> > serial</FONT> <BR><FONT SIZE=3D2>> > > port, but still my external modem = gets no dial tone. The </FONT> <BR><FONT SIZE=3D2>> modem works,</FONT> <BR><FONT SIZE=3D2>> > i used</FONT> <BR><FONT SIZE=3D2>> > > it on my wife's pentium pro this = morning. the phone line </FONT> <BR><FONT SIZE=3D2>> is good, i</FONT> <BR><FONT SIZE=3D2>> > have a</FONT> <BR><FONT SIZE=3D2>> > > laptop connect to it now to write = this email.</FONT> <BR><FONT SIZE=3D2>> > > </FONT> <BR><FONT SIZE=3D2>> > > I'm using 4.1 release on a noname = axppci.</FONT> <BR><FONT SIZE=3D2>> > > </FONT> <BR><FONT SIZE=3D2>> > > the only error I recieve are:</FONT> <BR><FONT SIZE=3D2>> > > = ppp[189]: tun0: Warning: Chat script failed</FONT> <BR><FONT SIZE=3D2>> > > dmesg | grep 'sio'</FONT> <BR><FONT SIZE=3D2>> > > </FONT> <BR><FONT SIZE=3D2>> > > tells me that</FONT> <BR><FONT SIZE=3D2>> > > sio0 configured irq4 not in bitmap of = probed irqs 0</FONT> <BR><FONT SIZE=3D2>> > > </FONT> <BR><FONT SIZE=3D2>> > > Is that a problem.</FONT> <BR><FONT SIZE=3D2>> > > </FONT> <BR><FONT SIZE=3D2>> > > Also, does sound work in the alpha = kernel, i used device pcm as in</FONT> <BR><FONT SIZE=3D2>> > i386</FONT> <BR><FONT SIZE=3D2>> > > kernel but the makedevs fail. It = seems to me that all the</FONT> <BR><FONT SIZE=3D2>> > documentation is</FONT> <BR><FONT SIZE=3D2>> > > i386 based...is there somewhere i can = go to find alpha </FONT> <BR><FONT SIZE=3D2>> specific info.</FONT> <BR><FONT SIZE=3D2>> > > </FONT> <BR><FONT SIZE=3D2>> > </FONT> <BR><FONT SIZE=3D2>> > If a terminal programm (cu and tip are in = the base system) receives</FONT> <BR><FONT SIZE=3D2>> > the echo from the modem the comunication = to the modem works.</FONT> <BR><FONT SIZE=3D2>> > With your description of the problem no = one can say if the </FONT> <BR><FONT SIZE=3D2>> comunication</FONT> <BR><FONT SIZE=3D2>> > to the modem failed or your chat script is = wrong or your modem</FONT> <BR><FONT SIZE=3D2>> > isn't plugged in or maybe your phone = provider failt or ...</FONT> <BR><FONT SIZE=3D2>> > </FONT> <BR><FONT SIZE=3D2>> > Please use a terminalprogram and try the = seriel connection </FONT> <BR><FONT SIZE=3D2>> to the modem</FONT> <BR><FONT SIZE=3D2>> > first before trying any complex things = like starting chat scripts.</FONT> <BR><FONT SIZE=3D2>> > </FONT> <BR><FONT SIZE=3D2>> > -- </FONT> <BR><FONT SIZE=3D2>> > = B.Walter &nbs= p; = COSMO-Project </FONT> <BR><FONT SIZE=3D2>> <A HREF=3D"http://www.cosmo-project.de" = TARGET=3D"_blank">http://www.cosmo-project.de</A></FONT> <BR><FONT SIZE=3D2>> > = ticso@cicely.de = Usergroup = info@cosmo-project.de</FONT> <BR><FONT SIZE=3D2>> </FONT> <BR><FONT SIZE=3D2>> -- </FONT> <BR><FONT SIZE=3D2>> = B.Walter &nbs= p; = COSMO-Project </FONT> <BR><FONT SIZE=3D2>> <A HREF=3D"http://www.cosmo-project.de" = TARGET=3D"_blank">http://www.cosmo-project.de</A></FONT> <BR><FONT SIZE=3D2>> = ticso@cicely.de = Usergroup = info@cosmo-project.de</FONT> <BR><FONT SIZE=3D2>> </FONT> </P> </BODY> </HTML> ------_=_NextPart_001_01C09A74.D5F90708-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ABC15E2D8FBCD311B4A200805FA7D59B026041FC>