Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 27 Oct 2001 12:56:27 +1300
From:      Richard B Mahoney <RBM49@student.canterbury.ac.nz>
To:        Paulo Fragoso <paulo@nlink.com.br>
Cc:        Subscribers to freebsd-hardware <freebsd-hardware@FreeBSD.ORG>
Subject:   Re: ASUS or MBR problem?
Message-ID:  <20011027125627.A307@it.canterbury.ac.nz>
In-Reply-To: <"from paulo"@nlink.com.br>
References:  <20011026195644.A21665-100000@mirage.nlink.com.br>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help

--IS0zKkzwUGydFO0o
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Dear Paulo,

On Fri, Oct 26, 2001 at 08:10:35PM -0200, Paulo Fragoso wrote:

> I've got two ASUS motherboard (A7VE and CUV4X) which I can't boot FreeBSD
> 4.x using IDE HD's with 3 partitions!!!

I'm using an Asus CUV4X-E without any issues. Here is the output from
/var/log/messages:

************************************************************

Oct 27 10:20:54 rbm49 /kernel: Copyright (c) 1992-2001 The FreeBSD
 Project.
Oct 27 10:20:54 rbm49 /kernel: Copyright (c) 1979, 1980, 1983, 1986,
 1988, 1989, 1991, 1992, 1993,1994
Oct 27 10:20:54 rbm49 /kernel: The Regents of the University of
 California. All rights reserved.
Oct 27 10:20:54 rbm49 /kernel: FreeBSD 4.3-RELEASE #0: Wed Oct  3
 23:10:02 NZST 2001
Oct 27 10:20:54 rbm49 /kernel:
 root@rbm49.tacacs.canterbury.ac.nz:/usr/src/sys/compile/MUGGINS
Oct 27 10:20:54 rbm49 /kernel: Timecounter "i8254"  frequency 1193182
 Hz
Oct 27 10:20:54 rbm49 /kernel: CPU: Pentium III/Pentium III
 Xeon/Celeron (999.73-MHz 686-class CPU)
Oct 27 10:20:54 rbm49 /kernel: Origin =3D "GenuineIntel"  Id =3D 0x686
 Stepping =3D 6
Oct 27 10:20:54 rbm49 /kernel:
 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M
 CA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
Oct 27 10:20:54 rbm49 /kernel: real memory  =3D 268353536 (262064K
 bytes)
Oct 27 10:20:54 rbm49 /kernel: config> di sn0
Oct 27 10:20:54 rbm49 /kernel: No such device: sn0
Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax.  Type `?'
 for help.
Oct 27 10:20:54 rbm49 /kernel: config> di lnc0
Oct 27 10:20:54 rbm49 /kernel: No such device: lnc0 =20
Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax.  Type `?'
 for help.
Oct 27 10:20:54 rbm49 /kernel: config> di ie0
Oct 27 10:20:54 rbm49 /kernel: No such device: ie0
Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax.  Type `?'
 for help.
Oct 27 10:20:54 rbm49 /kernel: config> di fe0
Oct 27 10:20:54 rbm49 /kernel: No such device: fe0
Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax.  Type `?'
 for help.
Oct 27 10:20:54 rbm49 /kernel: config> di ed0
Oct 27 10:20:54 rbm49 /kernel: No such device: ed0
Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax.  Type `?'
 for help.
Oct 27 10:20:54 rbm49 /kernel: config> di cs0
Oct 27 10:20:54 rbm49 /kernel: No such device: cs0
Oct 27 10:20:54 rbm49 /kernel: Invalid command or syntax.  Type `?'
 for help.
Oct 27 10:20:54 rbm49 /kernel: config> di bt0
Oct 27 10:20:54 rbm49 /kernel: config> di aic0
Oct 27 10:20:54 rbm49 /kernel: config> di aha0
Oct 27 10:20:54 rbm49 /kernel: config> di adv0
Oct 27 10:20:54 rbm49 /kernel: config> q
Oct 27 10:20:54 rbm49 /kernel: avail memory =3D 257609728 (251572K
 bytes)
Oct 27 10:20:54 rbm49 /kernel: Preloaded elf kernel "kernel" at
 0xc0393000.
Oct 27 10:20:55 rbm49 /kernel: Preloaded userconfig_script
 "/boot/kernel.conf" at 0xc039309c.
Oct 27 10:20:55 rbm49 /kernel: Preloaded elf module "agp.ko" at
 0xc03930ec.
Oct 27 10:20:55 rbm49 /kernel: Pentium Pro MTRR support enabled
Oct 27 10:20:55 rbm49 /kernel: md0: Malloc disk
Oct 27 10:20:55 rbm49 /kernel: npx0: <math processor> on motherboard
Oct 27 10:20:55 rbm49 /kernel: npx0: INT 16 interface
Oct 27 10:20:55 rbm49 /kernel: pcib0: <Host to PCI bridge> on
 motherboard
Oct 27 10:20:55 rbm49 /kernel: pci0: <PCI bus> on pcib0 =20
Oct 27 10:20:55 rbm49 /kernel: agp0: <VIA 82C691 (Apollo Pro) host to
 PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
Oct 27 10:20:55 rbm49 /kernel: pcib2: <VIA 82C598MVP (Apollo MVP3)
 PCI-PCI (AGP) bridge> at device1.0 on pci0
Oct 27 10:20:55 rbm49 /kernel: pci1: <PCI bus> on pcib2
Oct 27 10:20:55 rbm49 /kernel: pci1: <NVidia GeForce2 GTS graphics
 accelerator> at 0.0 irq 5
Oct 27 10:20:55 rbm49 /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at
 device 4.0 on pci0
Oct 27 10:20:55 rbm49 /kernel: isa0: <ISA bus> on isab0
Oct 27 10:20:55 rbm49 /kernel: atapci0: <VIA 82C686 ATA100 controller>
 port 0xd800-0xd80f at device 4.1 on pci0
Oct 27 10:20:55 rbm49 /kernel: ata0: at 0x1f0 irq 14 on atapci0
Oct 27 10:20:55 rbm49 /kernel: ata1: at 0x170 irq 15 on atapci0
Oct 27 10:20:55 rbm49 /kernel: uhci0: <VIA 83C572 USB controller> port
 0xd400-0xd41f irq 11 at device 4.2 on pci0
Oct 27 10:20:55 rbm49 /kernel: usb0: <VIA 83C572 USB controller> on
 uhci0
Oct 27 10:20:55 rbm49 /kernel: usb0: USB revision 1.0
Oct 27 10:20:55 rbm49 /kernel: uhub0: VIA UHCI root hub, class 9/0,
 rev 1.00/1.00, addr 1
Oct 27 10:20:55 rbm49 /kernel: uhub0: 2 ports with 2 removable, self
 powered
Oct 27 10:20:55 rbm49 /kernel: uhci1: <VIA 83C572 USB controller> port
 0xd000-0xd01f irq 11 at device 4.3 on pci0
Oct 27 10:20:55 rbm49 /kernel: usb1: <VIA 83C572 USB controller> on
 uhci1
Oct 27 10:20:55 rbm49 /kernel: usb1: USB revision 1.0
Oct 27 10:20:55 rbm49 /kernel: uhub1: VIA UHCI root hub, class 9/0,
 rev 1.00/1.00, addr 1
Oct 27 10:20:55 rbm49 /kernel: uhub1: 2 ports with 2 removable, self
 powered
Oct 27 10:20:55 rbm49 /kernel: dc0: <Macronix 98715/98715A
 10/100BaseTX> at device 9.0 on pci0
Oct 27 10:20:55 rbm49 /kernel: dc0: couldn't map ports/memory
Oct 27 10:20:55 rbm49 /kernel: device_probe_and_attach: dc0 attach
 returned 6
Oct 27 10:20:55 rbm49 /kernel: pci0: <unknown card> (vendor=3D0x14f1,
 dev=3D0x1035) at 10.0 =20
Oct 27 10:20:55 rbm49 /kernel: pcib1: <Host to PCI bridge> on
motherboard
Oct 27 10:20:55 rbm49 /kernel: pci2: <PCI bus> on pcib1
Oct 27 10:20:55 rbm49 /kernel: fdc0: <NEC 72065B or clone> at port
 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Oct 27 10:20:55 rbm49 /kernel: fdc0: FIFO enabled, 8 bytes threshold
Oct 27 10:20:55 rbm49 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive
 0
Oct 27 10:20:55 rbm49 /kernel: atkbdc0: <Keyboard controller (i8042)>
 at port 0x60,0x64 on isa0
Oct 27 10:20:55 rbm49 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1
 on atkbdc0
Oct 27 10:20:55 rbm49 /kernel: kbd0 at atkbd0
Oct 27 10:20:55 rbm49 /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Oct 27 10:20:55 rbm49 /kernel: psm0: model Generic PS/2 mouse, device
 ID 0
Oct 27 10:20:55 rbm49 /kernel: vga0: <Generic ISA VGA> at port
 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Oct 27 10:20:55 rbm49 /kernel: sc0: <System console> at flags 0x100 on
 isa0
Oct 27 10:20:55 rbm49 /kernel: sc0: VGA <16 virtual consoles,
 flags=3D0x300>
Oct 27 10:20:55 rbm49 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags
 0x10 on isa0
Oct 27 10:20:56 rbm49 /kernel: sio0: type 16550A
Oct 27 10:20:56 rbm49 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Oct 27 10:20:56 rbm49 /kernel: sio1: type 16550A
Oct 27 10:20:56 rbm49 /kernel: ppc0: <Parallel port> at port
 0x378-0x37f irq 7 on isa0
Oct 27 10:20:56 rbm49 /kernel: ppc0: SMC-like chipset
 (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Oct 27 10:20:56 rbm49 /kernel: ppc0: FIFO with 16/16/8 bytes threshold
Oct 27 10:20:56 rbm49 /kernel: ppi0: <Parallel I/O> on ppbus0
Oct 27 10:20:56 rbm49 /kernel: plip0: <PLIP network interface> on
 ppbus0
Oct 27 10:20:56 rbm49 /kernel: lpt0: <Printer> on ppbus0
Oct 27 10:20:56 rbm49 /kernel: lpt0: Interrupt-driven port  =20
Oct 27 10:20:56 rbm49 /kernel: ad0: 29319MB <FUJITSU MPG3307AT>
 [59570/16/63] at ata0-master UDMA100
Oct 27 10:20:56 rbm49 /kernel: acd0: CD-RW <CRW1232> at ata1-master
 using PIO4
Oct 27 10:20:56 rbm49 /kernel: ata1-slave: <IOMEGA ZIP 250 ATAPI
 Floppy/51.G> floppy device - NO DRIVER!
Oct 27 10:20:56 rbm49 /kernel: Mounting root from ufs:/dev/ad0s2a
Oct 27 10:20:56 rbm49 lpd[164]: lpd startup: logging=3D0

****************************************************************

Hope this helps,

 Richard Mahoney=20


--=20
+----------------------- Richard Mahoney -----------------------+
| 78 Jeffreys Rd                                 +64-3-351-5831 |
| Christchurch                                      New Zealand |
+--------------[mailto:rbm49@it.canterbury.ac.nz]---------------+

--IS0zKkzwUGydFO0o
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
MessageID: doDQUDkFNQJ6MD2KiJDhZn+pvKR2dGsY

iQA/AwUBO9n4Kla60siGOGUrEQIMOwCgsirBiTIFfcY5x4qEJl0G5eTVyhYAn3/t
hjrYYLfZFr4BwqwX8kfDWtj2
=WEpC
-----END PGP SIGNATURE-----

--IS0zKkzwUGydFO0o--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?20011027125627.A307>