Date: Tue, 04 May 2010 22:29:44 +0200 From: Per olof Ljungmark <peo@intersonic.se> To: Scott Long <scottl@samsco.org> Cc: freebsd-scsi@freebsd.org Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller Message-ID: <4BE083B8.6070402@intersonic.se> In-Reply-To: <32244F4E-DAF3-4CC0-B178-32B30076A0D5@samsco.org> References: <201005041800.o44I08d4017511@freefall.freebsd.org> <E860C0FC-EB64-4001-9BE4-C74075DB0D57@samsco.org> <4BE06F10.5080904@intersonic.se> <32244F4E-DAF3-4CC0-B178-32B30076A0D5@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Scott Long wrote: > Ah, I see a problem where the ACPI driver is rejecting the bridge > that the 2 extra controllers are on. This machine is likely 7-8 > years old, yes? Disabling ACPI from the freebsd boot menu or from > the BIOS. Also check if there are any BIOS/firmware upgrades > available for the machine. > > Scott A G4 should be around five years I think, the last U320 equipped ProLiant's. Moving the 6400 card to the slot closest to the MB fixed it. There is a great deal of confusion in HP's docs on slot numbering and such and although I did not find such information I suspect the controller should go inte this slot even if it's pictured in slot two in the manual. Thanks Scott. per
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BE083B8.6070402>