Date: Sat, 23 Aug 2003 23:11:10 +0000 From: Jens Rehsack <rehsack@liwing.de> To: Michelle <tristan11@mindspring.com> Cc: freebsd-questions@freebsd.org Subject: Re: orphaned port? Message-ID: <3F47F48E.8030900@liwing.de> In-Reply-To: <4DB65779-D5BB-11D7-B340-000393843210@mindspring.com> References: <4DB65779-D5BB-11D7-B340-000393843210@mindspring.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Michelle wrote:
>>
>> You should run a 'make clean' everywhere you left it. You can find it
>> using sth. like 'find /usr/ports -name "work"'.
>>
>> This should solve your problems.
>
>
>
> I ran 'make clean' in all the directories that came up after running
> 'find /usr/ports -name "work"'. Then I tried running make again in the
> mysql-server directory. Here is the output:
>
>
> ===> Extracting for mysql-server-3.23.57
> >> Checksum OK for mysql-3.23.57.tar.gz.
> ===> Patching for mysql-server-3.23.57
> ===> Applying FreeBSD patches for mysql-server-3.23.57
> ===> mysql-server-3.23.57 depends on file:
> /usr/local/libexec/libtool13/libtool - not found
> ===> Verifying install for /usr/local/libexec/libtool13/libtool in
> /usr/ports/devel/libtool13
> ===> Extracting for libtool-1.3.5_1
> >> Checksum OK for libtool-1.3.5.tar.gz.
> ===> Patching for libtool-1.3.5_1
> ===> libtool-1.3.5_1 depends on file: /usr/local/bin/sed_inplace - found
> ===> Applying FreeBSD patches for libtool-1.3.5_1
> ===> Configuring for libtool-1.3.5_1
> creating cache ./config.cache
> checking for a BSD compatible install... /usr/bin/install -c -o root -g
> wheel
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking for gcc... cc
> checking whether the C compiler (cc -O -pipe ) works... yes
> checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no
> checking whether we are using GNU C... yes
> checking whether cc accepts -g... yes
> checking for ranlib... ranlib
> checking host system type... i386-unknown-freebsd4.6.2
> checking build system type... i386-portbld-freebsd4.6.2
> checking for ld used by GCC... /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking for mawk... no
> checking for gawk... no
> checking for nawk... no
> checking for awk... awk
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating doc/Makefile
> creating tests/Makefile
> configuring in libltdl
> running /bin/sh ./configure --disable-ltdl-install --program-suffix=13
> --prefix=/usr/local --build=i386-portbld-freebsd4.6.2
> --cache-file=.././config.cache --srcdir=.
> loading cache .././config.cache
> checking for a BSD compatible install... /usr/bin/install -c -o root -g
> wheel
> checking whether build environment is sane... yes
> checking whether make sets ${MAKE}... (cached) yes
> checking for working aclocal... missing
> checking for working autoconf... missing
> checking for working automake... missing
> checking for working autoheader... missing
> checking for working makeinfo... found
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking for gcc... (cached) cc
> checking whether the C compiler (cc -O -pipe ) works... yes
> checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no
> checking whether we are using GNU C... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for working const... yes
> checking for inline... inline
> checking host system type... i386-unknown-freebsd4.6.2
> checking build system type... i386-portbld-freebsd4.6.2
> checking for ranlib... (cached) ranlib
> checking for ld used by GCC... (cached) /usr/libexec/elf/ld
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... (cached) yes
> checking for BSD-compatible nm... (cached) /usr/bin/nm -B
> checking whether ln -s works... (cached) yes
> updating cache .././config.cache
> loading cache .././config.cache within ltconfig
> checking for object suffix... o
> checking for executable suffix... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared
> libraries... yes
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.6.2 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> creating libtool
> updating cache .././config.cache
> loading cache .././config.cache
> checking which extension is used for shared libraries... .so
> checking which variable specifies run-time library path... LD_LIBRARY_PATH
> checking for objdir... .libs
> checking how to run the C preprocessor... cc -E
> checking for ANSI C header files... yes
> checking for malloc.h... no
> checking for memory.h... yes
> checking for stdlib.h... yes
> checking for stdio.h... yes
> checking for ctype.h... yes
> checking for dlfcn.h... yes
> checking for dl.h... no
> checking for dld.h... no
> checking for string.h... yes
> checking for strchr... yes
> checking for strrchr... yes
> checking whether libtool supports -dlopen/-dlpreopen... yes
> checking for dlopen in -ldl... no
> checking for dlopen... yes
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dld_link in -ldld... no
> checking for dlerror... yes
> checking command to parse /usr/bin/nm -B output... yes
> checking for _ prefix in compiled symbols... (cached) no
> updating cache .././config.cache
> creating ./config.status
> creating Makefile
> creating config.h
> ===> Building for libtool-1.3.5_1
> Making all in .
> CC="cc" CFLAGS="-O -pipe" CPPFLAGS="" LD="/usr/libexec/elf/ld"
> LDFLAGS="" LIBS="" LN_S="ln -s" NM="/usr/bin/nm -B" RANLIB="ranlib"
> DLLTOOL="" OBJDUMP="" AS="" /bin/sh ./ltconfig
> --cache-file=./config.cache --with-gcc --with-gnu-ld --enable-dlopen
> --srcdir=. --output=libtool ./ltmain.sh
> loading cache ./config.cache within ltconfig
> checking host system type... i386-unknown-freebsd4.6.2
> checking for object suffix... o
> checking for executable suffix... (cached) no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc supports -c -o file.o... yes
> checking if cc supports -c -o file.lo... yes
> checking if cc supports -fno-rtti -fno-exceptions ... yes
> checking if cc static flag -static works... -static
> checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
> checking whether the linker (/usr/libexec/elf/ld) supports shared
> libraries... yes
> checking command to parse /usr/bin/nm -B output... ok
> checking how to hardcode library paths into programs... immediate
> checking for /usr/libexec/elf/ld option to reload object files... -r
> checking dynamic linker characteristics... freebsd4.6.2 ld.so
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for objdir... .libs
> checking for dlopen in -ldl... (cached) no
> checking for dlopen... (cached) yes
> checking for dlfcn.h... (cached) yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... no
> creating libtool
> updating cache ./config.cache
> CONFIG_FILES=libtoolize CONFIG_HEADERS= ./config.status
> creating libtoolize
> chmod +x libtoolize
> Making all in libltdl
> Making all in doc
> cd . && makeinfo --no-split `echo libtool13.texi | sed 's,.*/,,'`
> libtool13.texi:2906: warning: `(' follows defined name
> `LTDL_SET_PRELOADED_SYMBOLS' instead of whitespace.
> Making all in tests
> ===> Installing for libtool-1.3.5_1
> ===> Generating temporary packing list
> ===> Checking if devel/libtool13 already installed
> *** Error code 1
>
> Stop in /usr/ports/devel/libtool13.
> *** Error code 1
>
> Stop in /usr/ports/databases/mysql323-server.
That was clear and the start of the jurney. Please update libtool either
using portupgrade or do it by hand as you do before.
Jens
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F47F48E.8030900>