From owner-freebsd-questions Sun Jun 1 00:04:36 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA10412 for questions-outgoing; Sun, 1 Jun 1997 00:04:36 -0700 (PDT) Received: from ns.telegroup.com (ns.telegroup.com [208.219.0.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA10407 for ; Sun, 1 Jun 1997 00:04:34 -0700 (PDT) Received: from 10.1.9.234 ([10.1.9.234]) by ns.telegroup.com (8.8.5/8.8.5) with SMTP id CAA02741; Sun, 1 Jun 1997 02:01:17 -0500 (CDT) Message-ID: <3390D9A0.3522@mail.telegroup.com> Date: Sun, 01 Jun 1997 02:08:32 +0000 From: Richard Windmann Reply-To: richardw@ns.telegroup.com Organization: Telegroup, Inc. X-Mailer: Mozilla 3.0Gold (Macintosh; I; PPC) MIME-Version: 1.0 To: Nathan Schuler CC: richardw@ns.telegroup.com, bsdi-users@BSDI.COM, freebsd-questions@FreeBSD.ORG Subject: Re: telnet References: <2.2.32.19970601041228.006e9abc@sparrow.sanasys.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Nathan Schuler wrote: > > When I try to telnet to anywhere outside of our domain I get: > > telnet: Unable to connect to remote host: No route to host > > Any ideas? > > Nathan Schuler > UNIX Netwoking Solutions / Systems Administrator > Sana Systems Inc. > Clinton, IA 52732 > (319) 242-5770 In your particular case, the gateway is .10, not .1 - why I don't know - who set up that net anyway? Check all your configs under /etc - that is, after you check to see if the net is up at all? From owner-freebsd-questions Sun Jun 1 00:11:24 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA10730 for questions-outgoing; Sun, 1 Jun 1997 00:11:24 -0700 (PDT) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA10724 for ; Sun, 1 Jun 1997 00:11:17 -0700 (PDT) Received: (from smap@localhost) by gatekeeper.barcode.co.il (8.8.5/8.6.12) id KAA00420; Sun, 1 Jun 1997 10:09:13 +0300 (IDT) X-Authentication-Warning: gatekeeper.barcode.co.il: smap set sender to using -f Received: from localhost.barcode.co.il(127.0.0.1) by gatekeeper.barcode.co.il via smap (V1.3) id sma000418; Sun Jun 1 10:08:59 1997 Message-ID: <33911FF3.47A@barcode.co.il> Date: Sun, 01 Jun 1997 10:08:35 +0300 From: Nadav Eiron X-Mailer: Mozilla 3.0 (X11; I; SunOS 5.5 sun4m) MIME-Version: 1.0 To: Chris Joyce CC: freebsd-questions@FreeBSD.ORG Subject: Re: anoymous ftp for virtual domain's References: <3.0.1.32.19970601155444.00690f1c@mail.shoal.net.au> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Chris Joyce wrote: > > I have managed to set up a anonymous ftp site on my server and it all seems > to work ok, > I have just added a virtual domain to the web server and have no clue on > how to make a ftp site for it, virtual ftp site ? where do i start ? > > chris What I use is wu-ftpd with the virtual FTP patches. Get wu-ftpd from the ports collection (if you haven't done so yet), and then look around the 'net for the virtual patches (I don't remember where exactly I got them from, but a couple of queries to AltaVista will probably get you there). By what I remember it all worked out of the box for me. Nadav From owner-freebsd-questions Sun Jun 1 00:32:16 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA11491 for questions-outgoing; Sun, 1 Jun 1997 00:32:16 -0700 (PDT) Received: from ds9.abac.com (qmailr@ds9.abac.com [206.171.121.64]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id AAA11486 for ; Sun, 1 Jun 1997 00:32:13 -0700 (PDT) Received: (qmail 2183 invoked by uid 501); 1 Jun 1997 07:32:10 -0000 Date: Sun, 1 Jun 1997 00:32:10 -0700 (PDT) From: Bryce Newall To: FreeBSD Questions List Subject: Remote X programs Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I'm running into a rather bizarre problem when trying to run X programs remotely and have them display on my local console screen. I'm running Linux on my home machine, ds9, and running FreeBSD on the remote machine, voyager. I'm trying to get xload to display voyager's load on ds9 using the following commands on voyager: setenv DISPLAY ds9:0.0 xload xload -update 5 -geometry 56x35+324+0 -bg black -fg green > /dev/null & which worked fine way back when voyager was also a Linux system. However, now I'm getting: xload: can't open kvm files Any ideas what's going on here? Muchos thankyous! ********************************************************************** * Bryce Newall * IRC: Data * Email: data@dal.net * * WWW: http://voyager.abac.com/data * IRC Admin, voyager.dal.net * * --== Try DALnet! Server irc.dal.net, port 7000 ==-- * * "Stop smirking, Number 1." -- J.L. Picard * * "I'm a doctor, not a doorstop!" -- EMH Program, ST:FC * ********************************************************************** From owner-freebsd-questions Sun Jun 1 01:08:13 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA12511 for questions-outgoing; Sun, 1 Jun 1997 01:08:13 -0700 (PDT) Received: from Campino.Informatik.RWTH-Aachen.DE (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA12501 for ; Sun, 1 Jun 1997 01:08:10 -0700 (PDT) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.31.2]) by Campino.Informatik.RWTH-Aachen.DE (RBI-Z-5/8.6.12) with ESMTP id KAA02763; Sun, 1 Jun 1997 10:07:55 +0200 (MET DST) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.8.5/8.6.9) id KAA28523; Sun, 1 Jun 1997 10:11:58 +0200 (MEST) From: Christoph Kukulies Message-Id: <199706010811.KAA28523@gil.physik.rwth-aachen.de> Subject: Re: telnet In-Reply-To: <2.2.32.19970601041228.006e9abc@sparrow.sanasys.com> from Nathan Schuler at "May 31, 97 11:12:28 pm" To: nschuler@sparrow.sanasys.com (Nathan Schuler) Date: Sun, 1 Jun 1997 10:11:58 +0200 (MEST) Cc: richardw@ns.telegroup.com, bsdi-users@BSDI.COM, freebsd-questions@FreeBSD.ORG Reply-To: Christoph Kukulies X-Mailer: ELM [version 2.4ME+ PL28 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > When I try to telnet to anywhere outside of our domain I get: > > telnet: Unable to connect to remote host: No route to host I suspect that either your interface doesn't have an address assigned or you don't have a default route. Look at netstat -in ifconfig -a netstat -rn > > Any ideas? > > > Nathan Schuler > UNIX Netwoking Solutions / Systems Administrator > Sana Systems Inc. > Clinton, IA 52732 > (319) 242-5770 > > -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de From owner-freebsd-questions Sun Jun 1 01:12:45 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA12681 for questions-outgoing; Sun, 1 Jun 1997 01:12:45 -0700 (PDT) Received: from Campino.Informatik.RWTH-Aachen.DE (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA12676 for ; Sun, 1 Jun 1997 01:12:39 -0700 (PDT) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.31.2]) by Campino.Informatik.RWTH-Aachen.DE (RBI-Z-5/8.6.12) with ESMTP id KAA02778; Sun, 1 Jun 1997 10:12:38 +0200 (MET DST) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.8.5/8.6.9) id KAA28574; Sun, 1 Jun 1997 10:16:41 +0200 (MEST) From: Christoph Kukulies Message-Id: <199706010816.KAA28574@gil.physik.rwth-aachen.de> Subject: Re: a.out programs are not executable! cant run any programs.. In-Reply-To: from Shawn Ramsey at "May 31, 97 08:07:50 pm" To: shawn@luke.cpl.net (Shawn Ramsey) Date: Sun, 1 Jun 1997 10:16:40 +0200 (MEST) Cc: andrejs@crl.com, freebsd-questions@FreeBSD.ORG Reply-To: Christoph Kukulies X-Mailer: ELM [version 2.4ME+ PL28 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > I installed it and even recomplied the kernel with no problems. > > However if I try to compile a simple hello.c program with gcc, the > > result is a.out. If I type a.out it says command not found. If I say > > file a.out it says it is a: > k > I don't know if this is the problem, but if you just typed "a.out" and the > directory you werent in is not in your path... it won't work. If thats the > case try "./a.out" (without the quoutes of course) You can also run this command *with* the quotes ;-) > > > > -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de From owner-freebsd-questions Sun Jun 1 01:59:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA14211 for questions-outgoing; Sun, 1 Jun 1997 01:59:26 -0700 (PDT) Received: from cowz.lumiere-cc.com (sin@cowz.lumiere-cc.com [204.188.120.22]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA14205 for ; Sun, 1 Jun 1997 01:59:24 -0700 (PDT) Received: from localhost (sin@localhost) by cowz.lumiere-cc.com (8.8.5/8.8.5) with SMTP id BAA28642 for ; Sun, 1 Jun 1997 01:59:58 -0700 (PDT) Date: Sun, 1 Jun 1997 01:59:55 -0700 (PDT) From: Sinuralan To: freebsd-questions@freebsd.org Subject: /var as symlink Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Heya, Just wanted to check and see if anybody knows for sure whether replacing /var with a symlink to something like /usr/var (with all appropriate subdirs) would work. Thanks in advance. --- Sin Cowz: http://cowz.lumiere-cc.com/ From owner-freebsd-questions Sun Jun 1 04:13:22 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA18417 for questions-outgoing; Sun, 1 Jun 1997 04:13:22 -0700 (PDT) Received: from castor2.freiepresse.de (castor2.freiepresse.de [194.25.232.30]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id EAA18412 for ; Sun, 1 Jun 1997 04:13:17 -0700 (PDT) Received: from dialup.freiepresse.de (ppp-pln180.freiepresse.de [194.25.234.180]) by castor2.freiepresse.de (8.8.4/8.8.4) with SMTP id MAA15877; Sun, 1 Jun 1997 12:11:01 -0100 (Etc/GMT) Message-ID: <339155FC.6C81@abo.freiepresse.de> Date: Sun, 01 Jun 1997 12:59:08 +0200 From: Gerhard Sittig Reply-To: G.Sittig@abo.freiepresse.de X-Mailer: Mozilla 3.01 [de] (Win95; I) MIME-Version: 1.0 To: andrejs@crl.com CC: FreeBSD-questions Subject: Re: a.out programs are not executable! Makefiles References: <3390380B.6A28@crl.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Andrejs Vanags wrote: > > However if I try to compile a simple hello.c program with gcc, the > result is a.out. If I type a.out it says command not found. > ... > HELP! how do I run a program after I do gcc and get a.out? typing a.out > does not work! > Once you read again the error message you will see the direction to go: "file not found" really means "don't know where a.out executable could be found" instead of "found it but didn't recognize the format". So all you have to do is to specify the program's location. Referring to `echo $PATH` you will find that the current directory isn't in it. That's the difference to the "usual" PC OSes. Commands are REALLY sought in the locations specified in $PATH ONLY and NOWHERE ELSE. You might a) specify the full path /home/user/project/a.out b) use a relative pathname ./a.out c) add the CWD to your PATH PATH=$PATH:.; export PATH I prefer methodes a) and b) and I really dislike methode c), since you might call the wrong version of 'test' or whatever just because there's one file called this name in the current directory ("by chance" :). Methods a) and b) make you much more aware of what you're doing. Regarding Makefiles: When using a somewhat intelligent version of make there is a reduced need for writing Makefiles on your own. 'gmake' for instance knows about a lot of dependencies and conventions and has a whole bunch of implicit rules to understand 'make hello' when there is a file named hello.c. You might want to use the -p (?) option to see the rule database (implicit and read from the Makefile - if any). You just have to write Makefiles once you want to add special options, use special libraries or your project has more than one source file. Once you get this far with experimenting there is a chance you can copy a Makefile from a different project. -- virtually yours -- G.Sittig@abo.FreiePresse.DE If you don't understand or are scared by any of the above ask your parents or an adult to help you. From owner-freebsd-questions Sun Jun 1 05:10:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA19839 for questions-outgoing; Sun, 1 Jun 1997 05:10:14 -0700 (PDT) Received: from helbig.informatik.ba-stuttgart.de (helbig.informatik.ba-stuttgart.de [141.31.166.22]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA19834 for ; Sun, 1 Jun 1997 05:10:11 -0700 (PDT) Received: (from helbig@localhost) by helbig.informatik.ba-stuttgart.de (8.8.5/8.8.5) id OAA01235; Sun, 1 Jun 1997 14:10:01 +0200 (MET DST) From: Wolfgang Helbig Message-Id: <199706011210.OAA01235@helbig.informatik.ba-stuttgart.de> Subject: Re: Remote X programs In-Reply-To: from Bryce Newall at "Jun 1, 97 00:32:10 am" To: data@ds9.abac.com (Bryce Newall) Date: Sun, 1 Jun 1997 14:10:01 +0200 (MET DST) Cc: freebsd-questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL30 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, > > xload: can't open kvm files > > Any ideas what's going on here? Muchos thankyous! This could be a permission problem. Does this happen when you start xload as root? On my system xload is owned by root and the set-user-id flag is turned on. It's better to put it in group `kmem' (chgrp /usr/X11R6/bin/xload kmem) and turn on the set-group-id flag (chmod g+s /usr/X11R6/bin/xload). This way ps(1) and top(1) is made to access /dev/kmem and it's recommended in the `bugs' section of xload's manual page. Wolfgang From owner-freebsd-questions Sun Jun 1 06:42:00 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA21842 for questions-outgoing; Sun, 1 Jun 1997 06:42:00 -0700 (PDT) Received: from tbird.metapath.com (tbird.metapath.com [207.14.52.9]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA21837 for ; Sun, 1 Jun 1997 06:41:58 -0700 (PDT) Received: from tbird.metapath.com (tbird.metapath.com [172.27.1.100]) by tbird.metapath.com (8.8.4/1400.031297-dah) with SMTP id GAA00051 for ; Sun, 1 Jun 1997 06:42:57 -0700 (PDT) Date: Sun, 1 Jun 1997 06:42:57 -0700 (PDT) From: Don Dugger To: FreeBSD Questions Subject: Problems with FreeBSD 2.2.1 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I updated my system to 2.2.1 from 2.1 a few weeks ago. Things went well, however I noticed some problems. 1. When running X (XFree86 3.2 I was running 3.1.2) I get "snow" as if screen memory access was messed up. I have a Diamond Stealth 64 Graphic 2000 Series and use the S3 driver. This worked very well in 2.1. 2. Jave no longer works in Netscape. I did all same things I did to get it to work under 2.1 but no luck. 3. The New Real Audio (3.0) dosen't work with Netscape. (The old one 2.0 works if link libc 3 to 2.2) It will play files local but not over the net, it says it can't open the audio device. Thx in advance... Don 8) From owner-freebsd-questions Sun Jun 1 08:05:20 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA23728 for questions-outgoing; Sun, 1 Jun 1997 08:05:20 -0700 (PDT) Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA23723 for ; Sun, 1 Jun 1997 08:05:15 -0700 (PDT) Received: from buffnet9.buffnet.net (buffnet9.buffnet.net [205.246.19.19]) by buffnet4.buffnet.net (8.7.5/8.7.3) with SMTP id LAA19128; Sun, 1 Jun 1997 11:05:37 -0400 (EDT) Received: from buffnet11.buffnet.net(205.246.19.55) by buffnet9.buffnet.net via smap (V2.0) id xma004869; Sun, 1 Jun 97 11:04:11 -0400 Date: Sun, 1 Jun 1997 11:05:27 -0400 (EDT) From: Steve To: jsteckro@bas.k12.mi.us cc: freebsd-questions@FreeBSD.ORG Subject: Re: modem In-Reply-To: <32CA0444.1752@scnc.bas.k12.mi.us> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, 1 Jan 1997, jsteckro wrote: > I have a 33.6 modem but yet it connects at 28.8?? Why doesn't it > connect at my modem speed? > Because there is no such thing as a clean enough phone line to connect at 33.6 with. From owner-freebsd-questions Sun Jun 1 08:21:51 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24121 for questions-outgoing; Sun, 1 Jun 1997 08:21:51 -0700 (PDT) Received: from netman.se (ariadne.netman.se [194.52.54.40]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA24112 for ; Sun, 1 Jun 1997 08:21:41 -0700 (PDT) Received: by ariadne.netman.se id <17025>; Sun, 1 Jun 1997 16:22:38 +0100 Message-Id: <97Jun1.162238gmt+0100.17025@ariadne.netman.se> Date: Sun, 1 Jun 1997 16:20:56 +0100 From: Johan Nilsson Organization: Network Management AB X-Mailer: Mozilla 2.01 (X11; I; SunOS 5.5 sun4m) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Sysinstall pre-config file (FreeBSD 2.2.1) X-URL: http://www.freebsd.org/support.html Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello, I've been trying to use pre-configuration files for sysinstall in FreeBSD 2.2.1. I had working files for the old preconfiguration (FreeBSD 2.1.0). Settings regarding installation media, ipaddr., router, distributions and so on seems to work. What I can't get to work is the disk partitioning and labelling (and startup of installationprocess). Since I haven't been able to find any documentation on the subject I have tried to read the source code. That gave me some hints but I still can't get the disk configuration to work (has the keyword script changed?). Sysinstall sets the disk labelling variables though. If anyone is familiar with the new sysinstall pre-config I would be very glad to know what to do. (I haven't had time to look at FreeBSD 2.2.2 yet. Since there are some changes in the sysconfig files I don't want to switch to it yet, but if the pre-config in sysinstall is improved I will change to that release) Regards Johan Below is my config file. I have changed/added the lines marked "->" since the old working file. debug=yes ->releaseName=2.2.1-RELEASE ports=/ports hostname=tor.Kurs.NetMan.SE blanktime=600 ftpPass=paSSword ftpUser=johan ftp=ftp://194.52.54.180// mediaType=ftp domainname=Kurs.NetMan.SE nameserver=194.52.54.40 defaultrouter=194.52.54.161 ipaddr=194.52.54.179 netmask=255.255.255.224 tcpInstallDevice=ep0 distSetXUser distSetDES disk=wd0 diskSpace=exclusive bootManager=booteasy diskPartitionEditor=script ->diskPartitionWrite=script ->rootSize=200 diskLabelEditor=script ->swapSize=200 diskLabelEditor=script ->usrSize=200 diskLabelEditor=script ->varSize=0 diskLabelEditor=script ->diskLabelCommit=script installCommit=script packageAdd=bash-1.14.5 packageAdd=mtools-2.0.7 packageAdd=tcsh-6.06 -- ------------------------------------------------ Johan Nilsson Email: johan@netman.se Network Management AB Voice: +46 8 720 53 90 Box 38117 Mobile: +46 708 17 31 76 S-100 64 Stockholm Fax: +46 8 720 53 92 M. Fax: +46 708 17 41 76 ------------------------------------------------ From owner-freebsd-questions Sun Jun 1 08:44:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24692 for questions-outgoing; Sun, 1 Jun 1997 08:44:47 -0700 (PDT) Received: from lix.intercom.es (root@lix.intercom.es [194.179.21.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA24687 for ; Sun, 1 Jun 1997 08:44:44 -0700 (PDT) Received: from jmma (ppp73.intercom.es [194.179.21.148]) by lix.intercom.es (8.7.3/8.6.12) with SMTP id RAA10580; Sun, 1 Jun 1997 17:48:34 +0100 Message-ID: Read-Receipt-To: JM Montolio A Priority: Normal To: freebsd , jmrueda MIME-Version: 1.0 From: JM Montolio A Subject: join the TEAM ! Date: Dom, 01 Jun 97 17:12:11 +0200 (MET) Content-Type: text/plain; charset=US-ASCII; X-MAPIextension=".TXT" Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk hello, i select your url after surfing the web for a while. i'm DESIGNING a new "language sensitive editor" , for posix systems. if you are interested to colaborate in the specification TEAM, please email me. also, if you known the "how to do" of this business , or the "who is who" of actual unix software ,please send me the/to the apropiate url's. i'm 'absolute beginner' at net; any feedback welcome. regards jm montolio a. From owner-freebsd-questions Sun Jun 1 09:37:29 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA26167 for questions-outgoing; Sun, 1 Jun 1997 09:37:29 -0700 (PDT) Received: from imsp015.netvigator.com (imsp015.netvigator.com [205.252.144.206]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA26162 for ; Sun, 1 Jun 1997 09:37:25 -0700 (PDT) Received: from adrianli (hhtam018062.netvigator.com [208.139.107.190]) by imsp015.netvigator.com (8.8.4/8.7.3) with SMTP id AAA19428; Mon, 2 Jun 1997 00:37:13 +0800 (HKT) Message-Id: <3.0.1.32.19970602003828.006a95f0@ims03.netvigator.com> X-Sender: unixwise@ims03.netvigator.com X-Mailer: Windows Eudora Pro Version 3.0.1 (32) Date: Mon, 02 Jun 1997 00:38:28 +0800 To: freebsd-questions@freebsd.org From: Adrian Li Subject: FreeBSD EIDE HD greate than 2G Cc: peter@taronga.com Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I then attempted to install the FreeBSD on my secondary EIDE harddisk, which is only 540M, but when I bootup the boot-disk, the kernel was panic, it fail to recongize all the data-storage device and the PC just hang-up. according to SCO-unix, their OS have the same problem due to the EIDE hard-disk size is greater than 2G. please give some advance, such that where can I get the new patch to fix this problem, or what else I could do with this. regards Adrian From owner-freebsd-questions Sun Jun 1 09:54:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA26644 for questions-outgoing; Sun, 1 Jun 1997 09:54:06 -0700 (PDT) Received: from tpts4.seed.net.tw (tpts4.seed.net.tw [139.175.1.11]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id JAA26638 for ; Sun, 1 Jun 1997 09:53:59 -0700 (PDT) Received: from ppt12797 by tpts4.seed.net.tw (SMI-8.6/SMI-SVR4) id AAA13179; Mon, 2 Jun 1997 00:52:57 +0800 Message-ID: <3391A89A.7F24@tpts4.seed.net.tw> Date: Mon, 02 Jun 1997 00:51:38 +0800 From: Gordon Wang Reply-To: syracuse@tpts4.seed.net.tw X-Mailer: Mozilla 3.01 (Win95; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: install problem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Dear Sir When I installed my freebsd from my NEC 8x cd-rom(IDE interface), my computer couldn't detect it. What should I do about it? If I buy a new SCSI interface card and a CD-ROM, can this problem be avoided easily? What is your suggestion? My computer configuration is CPU:pantium200 RAM 64M 1st Hard disk 2G (western digital) for win95 2nd Hard disk 2G (western digital) 0ne partition for dos The other for FreeBSD Video card ATI mach-64 Thanks for your help Gordon From owner-freebsd-questions Sun Jun 1 10:02:36 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA27150 for questions-outgoing; Sun, 1 Jun 1997 10:02:36 -0700 (PDT) Received: from radford.i-plus.net (root@Radford.i-Plus.net [206.99.237.6]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA27142 for ; Sun, 1 Jun 1997 10:02:26 -0700 (PDT) Received: from abyss (pitlord@Abyss.i-plus.net [206.99.237.44]) by radford.i-plus.net (8.8.5/8.8.5) with SMTP id MAA12124; Sun, 1 Jun 1997 12:35:42 -0400 (EDT) Message-Id: <199706011635.MAA12124@radford.i-plus.net> X-Mailer: Microsoft Outlook Express 4.71.0544.0 From: "Troy Settle" To: , "Chris Joyce" Subject: Re: anoymous ftp for virtual domain's Date: Sun, 1 Jun 1997 12:37:05 -0400 X-Priority: 3 X-MSMail-Priority: Normal MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-MimeOLE: Produced By Microsoft MimeOLE Engine V4.71.0544.0 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk From: Chris Joyce >I have managed to set up a anonymous ftp site on my server and it all seems >to work ok, >I have just added a virtual domain to the web server and have no clue on >how to make a ftp site for it, virtual ftp site ? where do i start ? > http://www.probe.net/~mgleason/ncftpd to put it simple, it ROCKS. Easy to set up, easy to manage. You can even have virtual users. -- Troy Settle Network Administrator, iPlus Internet Services http://www.i-Plus.net From owner-freebsd-questions Sun Jun 1 10:16:51 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA27624 for questions-outgoing; Sun, 1 Jun 1997 10:16:51 -0700 (PDT) Received: from agora.rdrop.com (root@agora.rdrop.com [199.2.210.241]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA27587 for ; Sun, 1 Jun 1997 10:15:22 -0700 (PDT) Received: from gatekeeper.barcode.co.il ([192.116.93.17]) by agora.rdrop.com (8.8.5/8.8.5) with ESMTP id KAA22778 for ; Sun, 1 Jun 1997 10:15:14 -0700 (PDT) Received: (from nadav@localhost) by gatekeeper.barcode.co.il (8.8.5/8.6.12) id UAA01666; Sun, 1 Jun 1997 20:02:34 +0300 (IDT) Date: Sun, 1 Jun 1997 20:02:34 +0300 (IDT) From: Nadav Eiron To: Adrian Li cc: freebsd-questions@FreeBSD.ORG, taronga.com!peter@agora.rdrop.com Subject: Re: FreeBSD EIDE HD greate than 2G In-Reply-To: <3.0.1.32.19970602003828.006a95f0@ims03.netvigator.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, Adrian Li wrote: > I then attempted to install the FreeBSD on my secondary EIDE harddisk, > which is only 540M, but when I bootup the boot-disk, the kernel was > panic, it fail to recongize all the data-storage device and the PC just > hang-up. Do you get the message: "Panic, cannot mount root"? Is your second disk the master on the secondary controller??? Does giving the string: 1:wd(2,a)/kernel at the Boot: prompt solve this problems? If your answer to the above questions was "yes" then this has nothing to do with the size of the disk. Search the archives for the solution. > > according to SCO-unix, their OS have the same problem due to the EIDE > hard-disk size is greater than 2G. please give some advance, such that > where can I get the new patch to fix this problem, or what else I could > do with this. > > regards > Adrian > Nadav From owner-freebsd-questions Sun Jun 1 10:17:29 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA27648 for questions-outgoing; Sun, 1 Jun 1997 10:17:29 -0700 (PDT) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA27619 for ; Sun, 1 Jun 1997 10:16:31 -0700 (PDT) Received: (from nadav@localhost) by gatekeeper.barcode.co.il (8.8.5/8.6.12) id UAA01746; Sun, 1 Jun 1997 20:15:30 +0300 (IDT) Date: Sun, 1 Jun 1997 20:15:30 +0300 (IDT) From: Nadav Eiron To: Gordon Wang cc: freebsd-questions@FreeBSD.ORG Subject: Re: install problem In-Reply-To: <3391A89A.7F24@tpts4.seed.net.tw> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, Gordon Wang wrote: > Dear Sir > When I installed my freebsd from my NEC 8x cd-rom(IDE interface), > my computer couldn't detect it. > What should I do about it? You're not specifying which version you're installing, so I assume 2.2.2 (or at least 2.2.1). If not, try a newer version, it may solve your problem. If not: First, try it in different configurations, i.e.: The CD as the slave on the master EIDE controller (with one of the disks) and the other disk alone on the secondary controller. If that fails try: The CD alone on the secondary EIDE channel and both disks on the first channel. In any case, make sure the CD is in the drive when you boot the install floppy. > If I buy a new SCSI interface card and a CD-ROM, can this problem be > avoided easily? Most likely yes. SCSI CDs have less problems with FreeBSD than EIDE CDs. However, 2.2.x version seem to work with almost anything these days. > What is your suggestion? > My computer configuration is > CPU:pantium200 > RAM 64M > 1st Hard disk 2G (western digital) for win95 > 2nd Hard disk 2G (western digital) 0ne partition for dos > The other for FreeBSD > Video card ATI mach-64 > > Thanks for your help > > Gordon > Nadav From owner-freebsd-questions Sun Jun 1 10:21:19 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA27837 for questions-outgoing; Sun, 1 Jun 1997 10:21:19 -0700 (PDT) Received: from tor-adm1.nbc.netcom.ca (taob@tor-adm1.nbc.netcom.ca [207.181.89.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA27592 for ; Sun, 1 Jun 1997 10:15:36 -0700 (PDT) Received: from localhost (taob@localhost) by tor-adm1.nbc.netcom.ca (8.8.5/8.8.5) with SMTP id NAA20841; Sun, 1 Jun 1997 13:15:07 -0400 (EDT) Date: Sun, 1 Jun 1997 13:15:07 -0400 (EDT) From: Brian Tao To: Dan Busarow cc: FREEBSD-QUESTIONS Subject: Re: 1 step forward 2 steps back In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 29 May 1997, Dan Busarow wrote: > > OK, then there should be an "I prefer vi" option. There already is one in the options, but I don't think it is propagated to root's environment. -- Brian Tao (BT300, taob@netcom.ca) "Though this be madness, yet there is method in't" From owner-freebsd-questions Sun Jun 1 10:22:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA27883 for questions-outgoing; Sun, 1 Jun 1997 10:22:14 -0700 (PDT) Received: from tor-adm1.nbc.netcom.ca (taob@tor-adm1.nbc.netcom.ca [207.181.89.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA27877 for ; Sun, 1 Jun 1997 10:22:08 -0700 (PDT) Received: from localhost (taob@localhost) by tor-adm1.nbc.netcom.ca (8.8.5/8.8.5) with SMTP id NAA21432; Sun, 1 Jun 1997 13:17:48 -0400 (EDT) Date: Sun, 1 Jun 1997 13:17:48 -0400 (EDT) From: Brian Tao To: Brian Litzinger cc: "Jordan K. Hubbard" , FREEBSD-QUESTIONS Subject: Re: 1 step forward 2 steps back In-Reply-To: <19970528133105.03570@mpress.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, 28 May 1997, Brian Litzinger wrote: > > I've noticed the same thing. Happens most often when we run vipw. > Could we upgrade the vi to something more modern. 8-) I vote for vim. :) There really is no other choice. ;-) -- Brian Tao (BT300, taob@netcom.ca) "Though this be madness, yet there is method in't" From owner-freebsd-questions Sun Jun 1 10:25:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA28043 for questions-outgoing; Sun, 1 Jun 1997 10:25:41 -0700 (PDT) Received: from train.tgci.com ([205.185.169.3]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id KAA28035 for ; Sun, 1 Jun 1997 10:25:37 -0700 (PDT) Received: from emilyd ([206.250.85.68]) by train.tgci.com (8.6.12/8.6.9) with SMTP id KAA29118; Sun, 1 Jun 1997 10:57:10 -0700 Message-Id: <199706011757.KAA29118@train.tgci.com> Comments: Authenticated sender is From: "Riley J. McIntire" To: Nadav Eiron Date: Sun, 1 Jun 1997 10:23:01 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: LINT and GENERIC - between a rock and a generic place. Reply-to: chaos@tgci.com CC: questions@FreeBSD.ORG Priority: normal X-mailer: Pegasus Mail for Win32 (v2.42a) Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > On Sat, 31 May 1997, Jordan K. Hubbard wrote: > > > More and more people are trying to use GENERIC as a template for their > > own kernels and they're losing, of course, because generic sets many > > limits (like max children or open files) too low. > > > [snip] > > > Meanwhile, of course, the users continue to use GENERIC (or worse, > > LINT) as their only available guides and they continue to walk off > > cliffs, year after year. > > As a newbie climbing a cliff with broken legs I cound have sworn that LINT was recommended as a template in the docs. [snip] > This sure will save bandwidth on -questions, and many frustrated newbies > from climbing up on walls. > Cliffs, not walls...;-) Why not post a few working templates right now on the web site? > > > > Jordan > > > > Yet another $.02 (I think someone is getting rich here collecting these > cents :-) ). > > Nadav Could someone send me a config for a low to moderate volume web/mail/name server? I'm getting a little nervous. ;-) Thanks, Riley From owner-freebsd-questions Sun Jun 1 10:44:00 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA28679 for questions-outgoing; Sun, 1 Jun 1997 10:44:00 -0700 (PDT) Received: from ds9.abac.com (qmailr@ds9.abac.com [206.171.121.64]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id KAA28674 for ; Sun, 1 Jun 1997 10:43:57 -0700 (PDT) Received: (qmail 6267 invoked by uid 501); 1 Jun 1997 17:43:49 -0000 Date: Sun, 1 Jun 1997 10:43:49 -0700 (PDT) From: Bryce Newall To: Sinuralan cc: freebsd-questions@FreeBSD.ORG Subject: Re: /var as symlink In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 1 Jun 1997, Sinuralan wrote: > Just wanted to check and see if anybody knows for sure whether replacing > /var with a symlink to something like /usr/var (with all appropriate > subdirs) would work. As long as /usr is on your root partition, I don't see any reason why it wouldn't work. However, as far as I know, the system needs to access files in /var during the boot process, and if you have /var linked to a directory that's on another filesystem, and that filesystem isn't mounted yet, you may run into problems. ********************************************************************** * Bryce Newall * IRC: Data * Email: data@dal.net * * WWW: http://voyager.abac.com/data * IRC Admin, voyager.dal.net * * --== Try DALnet! Server irc.dal.net, port 7000 ==-- * * "Stop smirking, Number 1." -- J.L. Picard * * "I'm a doctor, not a doorstop!" -- EMH Program, ST:FC * ********************************************************************** From owner-freebsd-questions Sun Jun 1 11:01:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA29254 for questions-outgoing; Sun, 1 Jun 1997 11:01:06 -0700 (PDT) Received: from ds9.abac.com (qmailr@ds9.abac.com [206.171.121.64]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id LAA29247 for ; Sun, 1 Jun 1997 11:01:02 -0700 (PDT) Received: (qmail 6537 invoked by uid 501); 1 Jun 1997 18:00:58 -0000 Date: Sun, 1 Jun 1997 11:00:58 -0700 (PDT) From: Bryce Newall To: Wolfgang Helbig cc: freebsd-questions@FreeBSD.ORG Subject: Re: Remote X programs In-Reply-To: <199706011210.OAA01235@helbig.informatik.ba-stuttgart.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 1 Jun 1997, Wolfgang Helbig wrote: > This could be a permission problem. Does this happen when you start > xload as root? Nope, works fine as root. > On my system xload is owned by root and the set-user-id flag is > turned on. > It's better to put it in group `kmem' (chgrp /usr/X11R6/bin/xload kmem) > and turn on the set-group-id flag (chmod g+s /usr/X11R6/bin/xload). That worked perfectly. Thanks! On my system, xload didn't have the suid or sgid bit on. I changed its group to kmem and set the gid bit on, which worked great. ********************************************************************** * Bryce Newall * IRC: Data * Email: data@dal.net * * WWW: http://voyager.abac.com/data * IRC Admin, voyager.dal.net * * --== Try DALnet! Server irc.dal.net, port 7000 ==-- * * "Stop smirking, Number 1." -- J.L. Picard * * "I'm a doctor, not a doorstop!" -- EMH Program, ST:FC * ********************************************************************** From owner-freebsd-questions Sun Jun 1 11:12:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA29542 for questions-outgoing; Sun, 1 Jun 1997 11:12:06 -0700 (PDT) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA29537 for ; Sun, 1 Jun 1997 11:12:02 -0700 (PDT) Received: (from nadav@localhost) by gatekeeper.barcode.co.il (8.8.5/8.6.12) id VAA01867; Sun, 1 Jun 1997 21:10:27 +0300 (IDT) Date: Sun, 1 Jun 1997 21:10:27 +0300 (IDT) From: Nadav Eiron To: Bryce Newall cc: Sinuralan , freebsd-questions@FreeBSD.ORG Subject: Re: /var as symlink In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 1 Jun 1997, Bryce Newall wrote: > On Sun, 1 Jun 1997, Sinuralan wrote: > > > Just wanted to check and see if anybody knows for sure whether replacing > > /var with a symlink to something like /usr/var (with all appropriate > > subdirs) would work. > > As long as /usr is on your root partition, I don't see any reason why it > wouldn't work. However, as far as I know, the system needs to access > files in /var during the boot process, and if you have /var linked to a > directory that's on another filesystem, and that filesystem isn't mounted > yet, you may run into problems. Not so. /var need not be part of the root filesystem. By default it isn't. > > ********************************************************************** > * Bryce Newall * IRC: Data * Email: data@dal.net * > * WWW: http://voyager.abac.com/data * IRC Admin, voyager.dal.net * > * --== Try DALnet! Server irc.dal.net, port 7000 ==-- * > * "Stop smirking, Number 1." -- J.L. Picard * > * "I'm a doctor, not a doorstop!" -- EMH Program, ST:FC * > ********************************************************************** > > Nadav From owner-freebsd-questions Sun Jun 1 11:31:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA29981 for questions-outgoing; Sun, 1 Jun 1997 11:31:26 -0700 (PDT) Received: from tok.qiv.com ([204.214.141.211]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA29976 for ; Sun, 1 Jun 1997 11:31:21 -0700 (PDT) Received: (from uucp@localhost) by tok.qiv.com (8.8.5/8.8.5) with UUCP id NAA14598; Sun, 1 Jun 1997 13:30:54 -0500 (CDT) Received: from localhost (jdn@localhost) by acp.qiv.com (8.8.5/8.8.5) with SMTP id NAA00724; Sun, 1 Jun 1997 13:23:58 -0500 (CDT) X-Authentication-Warning: acp.qiv.com: jdn owned process doing -bs Date: Sun, 1 Jun 1997 13:23:58 -0500 (CDT) From: "Jay D. Nelson" To: Sinuralan cc: freebsd-questions@FreeBSD.ORG Subject: Re: /var as symlink In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk This will work. -- However -- you must do it in single user mode. Tar up your current /var and stick it somewhere in /usr. Boot single user, mount / and /usr rw, edit /etc/fstab appropriately, create your directory and symlinks, untar the old var in the new spot and reboot multiuser. -- Jay On Sun, 1 Jun 1997, Sinuralan wrote: -> ->Heya, -> ->Just wanted to check and see if anybody knows for sure whether replacing ->/var with a symlink to something like /usr/var (with all appropriate ->subdirs) would work. -> ->Thanks in advance. -> ->--- ->Sin ->Cowz: http://cowz.lumiere-cc.com/ -> From owner-freebsd-questions Sun Jun 1 12:37:16 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA02093 for questions-outgoing; Sun, 1 Jun 1997 12:37:16 -0700 (PDT) Received: from mp.infotell.isar.de (mp.infotell.isar.de [194.120.57.9]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA02086 for ; Sun, 1 Jun 1997 12:37:09 -0700 (PDT) Received: from mp.infotell.isar.de (localhost.infotell.isar.de [127.0.0.1]) by mp.infotell.isar.de (8.8.5/8.7.3) with ESMTP id VAA01451 for ; Sun, 1 Jun 1997 21:35:32 +0200 (MET DST) Message-Id: <199706011935.VAA01451@mp.infotell.isar.de> To: freebsd-questions@freebsd.org Subject: Mail filtering (Was: Re: 2 reply addresses) Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 01 Jun 1997 21:35:32 +0200 From: Mathias Picker Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Just a note to mh/exmh users. I recently found a nice filter which actually learns your prefs while-u-work, Blurb from README follows: >Current version can be found under "ftp://syrinx.res.cmu.edu/pub/ifile/". > > What is ifile? > > ifile is an intelligent mail filtering program which uses framework > provided by the MH mailing system and the slocal filtering system. It > uses the text-based learning algorithm, Naive Bayesian, to determine > what type of mail you like to have filtered into your different > folders. It learns by observing any actions you take to move (refile) > messages to different folders than they were originally filtered to. > The great benefit of ifile is that once ifile is in place, ifile will > update its knowlege about your preferences with every message that you > refile. Normally, with other filters, you must write down a strict > set of rules and then change those rules as your preferences change. > ifile does not deal with keywords, but rather with the word frequency > of the messages you receive, thus putting a much stronger emphasis on > message content and the actual meaning of the message. As it is well > integrated in the EXMH package, it requires little maintainance after > the initial installation. >From what I remember it compiled and installed right out-of-the-box. If not, the problems probably weren't big enough to be saved in my case-base ;-). Mathias From owner-freebsd-questions Sun Jun 1 13:32:35 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA03840 for questions-outgoing; Sun, 1 Jun 1997 13:32:35 -0700 (PDT) Received: from localhost.nih.gov (poca41.capecod.net [205.230.13.41]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id NAA03835 for ; Sun, 1 Jun 1997 13:32:29 -0700 (PDT) Received: (from crtb@localhost) by localhost.nih.gov (8.6.12/8.6.12) id QAA01297 for questions@freebsd.org; Sun, 1 Jun 1997 16:32:13 -0400 Date: Sun, 1 Jun 1997 16:32:13 -0400 From: Chuck Message-Id: <199706012032.QAA01297@localhost.nih.gov> To: questions@freebsd.org Subject: Adobe PDF - how to decode in FreeBSD Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Subject says it! I periodically receive PDF files in the mail, and have no way, short of booting dos, to read them. Has the format been documented anywhere; can Ghostscript read it, or has the Acrobat reader been adapted to FreeBSD? TIA and happy Fathers' Day! Chuck Bacon -- crtb@capecod.net ABHOR SECRECY -- DEFEND PRIVACY From owner-freebsd-questions Sun Jun 1 13:33:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA03885 for questions-outgoing; Sun, 1 Jun 1997 13:33:41 -0700 (PDT) Received: from tangelo.lal.ufl.edu ([204.199.163.200]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id NAA03880 for ; Sun, 1 Jun 1997 13:33:36 -0700 (PDT) Received: from bates-dialup (204.199.163.191) by tangelo.lal.ufl.edu (EMWAC SMTPRS 0.81) with SMTP id ; Sun, 01 Jun 1997 16:36:50 -0400 Message-ID: From: "Brad Bates" To: "FreeBSD-questions" Subject: Re: a.out programs are not executable! Makefiles Date: Sun, 1 Jun 1997 16:13:57 -0400 X-MSMail-Priority: Normal X-Priority: 3 X-Mailer: Microsoft Internet Mail 4.70.1161 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk <- snip -> > You might > a) specify the full path /home/user/project/a.out > b) use a relative pathname ./a.out > c) add the CWD to your PATH PATH=$PATH:.; export PATH > > I prefer methodes a) and b) and I really dislike methode c), since you > might call the wrong version of 'test' or whatever just because there's > one file called this name in the current directory ("by chance" :). > Methods a) and b) make you much more aware of what you're doing. Not to mention the "elementary" security problems this can present when someone lays a bogus (and evil) program in front of you... <- snip -> > -- > virtually yours -- G.Sittig@abo.FreiePresse.DE > > If you don't understand or are scared by any of the above > ask your parents or an adult to help you. Okay, but I don't think any of them are in my $PATH either ;) bab From owner-freebsd-questions Sun Jun 1 13:34:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA04030 for questions-outgoing; Sun, 1 Jun 1997 13:34:28 -0700 (PDT) Received: from onyx.interactive.net (root@onyx.interactive.net [208.192.224.6]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id NAA04025 for ; Sun, 1 Jun 1997 13:34:26 -0700 (PDT) Received: from luddite.org (host019.madison.interactive.net [208.192.224.119]) by onyx.interactive.net (8.8.5/8.8.5) with ESMTP id QAA08966 for ; Sun, 1 Jun 1997 16:34:12 -0400 (EDT) Received: (from sachs@localhost) by luddite.org (8.8.5/8.8.5) id QAA00309; Sun, 1 Jun 1997 16:36:35 -0400 (EDT) To: questions@FreeBSD.org Subject: 2.2.2, start_if.tun0 and sendmail Mime-Version: 1.0 (generated by tm-edit 7.101) Content-Type: text/plain; charset=US-ASCII From: Jay Sachs Date: 01 Jun 1997 16:36:34 -0400 Message-ID: <87zptarrfx.fsf@luddite.org> Lines: 38 X-Mailer: Gnus v5.4.55/XEmacs 19.15 X-Face: 6!-I&o^[[HP+0~O~}d2Zf@Pbof:|>j5^*W$QOR"&)JYcHT.@-"AhAXLg3vioV79Ri3JMp/a e3QD@Z$1Ot@'j1/A Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk My 'net connection is made solely via PPP by the following line in /etc/start_if.tun0: /usr/sbin/ppp -ddial ondemand >/dev/null 2>&1 sendmail is configured in /etc/rc.conf with sendmail_enable="YES" # Run the sendmail daemon (or NO). sendmail_flags="-bd -q30m" # -bd is pretty mandatory For whatever reason, sendmail won't daemonize until the ppp connection is established. The problem with this is that the boot-up process waits for this to happen. I *could* edit /etc/rc to start sendmail up in the background, but I hesitate to do that. And I can't see a way to pass the '&' as a bg indicator in rc.conf. Perhaps there's something wrong w/ my sendmail configuration? Here it is: VERSIONID(`blah')dnl OSTYPE(bsd4.4)dnl DOMAIN(generic)dnl MASQUERADE_AS(interactive.net) FEATURE(masquerade_envelope) EXPOSED_USER(root) LOCAL_USER(root sachs) define(`LOCAL_RELAY', interactive.net) define(`SMART_HOST', interactive.net) MAILER(local)dnl MAILER(smtp)dnl I understand that one other option is to put the ppp startup in rc.local, in which case sendmail just breezes by. But I'd like to start up the ppp connection ASAP. Any ideas? -jay From owner-freebsd-questions Sun Jun 1 14:04:52 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA05115 for questions-outgoing; Sun, 1 Jun 1997 14:04:52 -0700 (PDT) Received: from shell6.ba.best.com (jkb@shell6.ba.best.com [206.184.139.137]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA05106 for ; Sun, 1 Jun 1997 14:04:50 -0700 (PDT) Received: from localhost (jkb@localhost) by shell6.ba.best.com (8.8.5/8.7.3) with SMTP id OAA20618; Sun, 1 Jun 1997 14:04:48 -0700 (PDT) X-Authentication-Warning: shell6.ba.best.com: jkb owned process doing -bs Date: Sun, 1 Jun 1997 14:04:48 -0700 (PDT) From: Jan Koum X-Sender: jkb@shell6.ba.best.com To: Chuck cc: questions@FreeBSD.ORG Subject: Re: Adobe PDF - how to decode in FreeBSD In-Reply-To: <199706012032.QAA01297@localhost.nih.gov> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Yes, Acrobat reader can be used with Linux binary emulation module. -- Yan On Sun, 1 Jun 1997, Chuck wrote: > Date: Sun, 1 Jun 1997 16:32:13 -0400 > From: Chuck > To: questions@FreeBSD.ORG > Subject: Adobe PDF - how to decode in FreeBSD > > Subject says it! I periodically receive PDF files in the mail, > and have no way, short of booting dos, to read them. Has the > format been documented anywhere; can Ghostscript read it, or > has the Acrobat reader been adapted to FreeBSD? > > TIA and happy Fathers' Day! > Chuck Bacon -- crtb@capecod.net > ABHOR SECRECY -- DEFEND PRIVACY > From owner-freebsd-questions Sun Jun 1 14:25:38 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA05694 for questions-outgoing; Sun, 1 Jun 1997 14:25:38 -0700 (PDT) Received: from emout07.mail.aol.com (emout07.mx.aol.com [198.81.11.22]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA05689 for ; Sun, 1 Jun 1997 14:25:34 -0700 (PDT) From: Almondale@aol.com Received: (from root@localhost) by emout07.mail.aol.com (8.7.6/8.7.3/AOL-2.0.0) id RAA19607 for freebsd-questions@freebsd.org; Sun, 1 Jun 1997 17:25:02 -0400 (EDT) Date: Sun, 1 Jun 1997 17:25:02 -0400 (EDT) Message-ID: <970601172501_877375401@emout07.mail.aol.com> To: freebsd-questions@freebsd.org Subject: IP Masquerading Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk The latest linux kernel includes support for IP Masquerading, so "private lans" can share a dialup gateway. What (if any) support does FreeBSD have for doing this. I have the most recent PPP binaries, but the routed command, when invoked with -q, returns "no route to hosts" or "can't assign requested address", and I get the effect described in the PPP manpages, namely the gateway host can see the internet via my ISP but *is not forwarding* packets back to my private LAN. I have invoked ppp with the -alias subcommand and given the static route to my ISDN-modem-equipped Freebsd (2.2.1) machine, but IP forwarding never seems to occur. I have even tried to remake the kernel using MROUTED, but it seems to me routed itself *ought* to work? Anybody with experience getting this setup to work? Thanks, Alex From owner-freebsd-questions Sun Jun 1 14:29:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA05802 for questions-outgoing; Sun, 1 Jun 1997 14:29:08 -0700 (PDT) Received: from localhost.nih.gov (poca41.capecod.net [205.230.13.41]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id OAA05795 for ; Sun, 1 Jun 1997 14:29:04 -0700 (PDT) Received: (from crtb@localhost) by localhost.nih.gov (8.6.12/8.6.12) id RAA01446; Sun, 1 Jun 1997 17:28:38 -0400 Date: Sun, 1 Jun 1997 17:28:38 -0400 From: Chuck Message-Id: <199706012128.RAA01446@localhost.nih.gov> To: crtb@capecod.net, jkb@best.com Subject: Re: Adobe PDF - how to decode in FreeBSD Cc: questions@FreeBSD.ORG Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Yes, Acrobat reader can be used with Linux binary emulation > module. > -- Yan Thanks! Running 2.1.0R, perhaps time to upgrade. I'll look up the Linux module. Chuck Bacon -- crtb@capecod.net FWIW, BTW, IMHO, AFAIK, YMMV RSN. OTOH, RTFM. FYI. TTYL. From owner-freebsd-questions Sun Jun 1 15:01:10 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA06984 for questions-outgoing; Sun, 1 Jun 1997 15:01:10 -0700 (PDT) Received: from helbig.informatik.ba-stuttgart.de (helbig.informatik.ba-stuttgart.de [141.31.166.22]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA06976 for ; Sun, 1 Jun 1997 15:01:00 -0700 (PDT) Received: (from helbig@localhost) by helbig.informatik.ba-stuttgart.de (8.8.5/8.8.5) id XAA04580; Sun, 1 Jun 1997 23:59:50 +0200 (MET DST) From: Wolfgang Helbig Message-Id: <199706012159.XAA04580@helbig.informatik.ba-stuttgart.de> Subject: Re: 2.2.2, start_if.tun0 and sendmail In-Reply-To: <87zptarrfx.fsf@luddite.org> from Jay Sachs at "Jun 1, 97 04:36:34 pm" To: sachs@interactive.net (Jay Sachs) Date: Sun, 1 Jun 1997 23:59:50 +0200 (MET DST) Cc: questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL30 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > My 'net connection is made solely via PPP by the following line in > /etc/start_if.tun0: > > /usr/sbin/ppp -ddial ondemand >/dev/null 2>&1 > > sendmail is configured in /etc/rc.conf with > > sendmail_enable="YES" # Run the sendmail daemon (or NO). > sendmail_flags="-bd -q30m" # -bd is pretty mandatory > > For whatever reason, sendmail won't daemonize until the ppp connection > is established. The problem with this is that the boot-up process [ ... ] > I understand that one other option is to put the ppp startup in > rc.local, in which case sendmail just breezes by. But I'd like to > start up the ppp connection ASAP. What does /var/log/maillog show? I once had this problem and the reason was an "unknown" interface address on a point to point interface (10.0.0.1) During bootup sendmail just stood there and I had to send ^C to it to proceed with booting. The line in maillog complained about this address not being resolvabel to a host name. So I put 10.0.0.1 dummy in /etc/hosts and sendmail started happily thereafter. Wolfgang From owner-freebsd-questions Sun Jun 1 15:02:56 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA07076 for questions-outgoing; Sun, 1 Jun 1997 15:02:56 -0700 (PDT) Received: from shell6.ba.best.com (jkb@shell6.ba.best.com [206.184.139.137]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA07069 for ; Sun, 1 Jun 1997 15:02:53 -0700 (PDT) Received: from localhost (jkb@localhost) by shell6.ba.best.com (8.8.5/8.7.3) with SMTP id PAA23663; Sun, 1 Jun 1997 15:02:47 -0700 (PDT) X-Authentication-Warning: shell6.ba.best.com: jkb owned process doing -bs Date: Sun, 1 Jun 1997 15:02:47 -0700 (PDT) From: Jan Koum X-Sender: jkb@shell6.ba.best.com To: Almondale@aol.com cc: freebsd-questions@FreeBSD.ORG Subject: Re: IP Masquerading In-Reply-To: <970601172501_877375401@emout07.mail.aol.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 1 Jun 1997 Almondale@aol.com wrote: > Date: Sun, 1 Jun 1997 17:25:02 -0400 (EDT) > From: Almondale@aol.com > To: freebsd-questions@FreeBSD.ORG > Subject: IP Masquerading > > The latest linux kernel includes support for IP Masquerading, so "private > lans" can share a dialup gateway. What (if any) support does FreeBSD have for > doing this. I have the most recent PPP binaries, but the routed command, when If you are using a modem, you can do it with ppp -alias (there is a very good tutorial on how to do it on www.freebsd.org) You can also do the same with two ethernet cards - you would need to get NAT daemon and compile your kernel with "options IPFIREWALL" and "options IPDIVERT" - but read more about it in natd documentation/man page. > invoked with -q, returns "no route to hosts" or "can't assign requested > address", and I get the effect described in the PPP manpages, namely the > gateway host can see the internet via my ISP but *is not forwarding* packets > back to my private LAN. I have invoked ppp with the -alias subcommand and > given the static route to my ISDN-modem-equipped Freebsd (2.2.1) machine, but > IP forwarding never seems to occur. I have even tried to remake the kernel Did you set "gateway=YES" in /etc/sysconfig? > using MROUTED, but it seems to me routed itself *ought* to work? Anybody with > experience getting this setup to work? > -- yan From owner-freebsd-questions Sun Jun 1 16:22:27 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA13153 for questions-outgoing; Sun, 1 Jun 1997 16:22:27 -0700 (PDT) Received: from cedb.dpcsys.com (ns2.BEACH.net [209.25.4.3]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA13148 for ; Sun, 1 Jun 1997 16:22:25 -0700 (PDT) Received: from localhost (dan@localhost) by cedb.dpcsys.com (8.8.5/8.8.2) with SMTP id XAA02290; Sun, 1 Jun 1997 23:22:18 GMT Date: Sun, 1 Jun 1997 16:22:17 -0700 (PDT) From: Dan Busarow To: Jay Sachs cc: questions@FreeBSD.ORG Subject: Re: 2.2.2, start_if.tun0 and sendmail In-Reply-To: <87zptarrfx.fsf@luddite.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On 1 Jun 1997, Jay Sachs wrote: > For whatever reason, sendmail won't daemonize until the ppp connection > is established. The problem with this is that the boot-up process sendmail tries to resolve all of your interfaces at startup (in daemon mode) in order to build an initial Cw You can try to add your host in /etc/hosts if it's not there already. Another, ugly, option would be to remove the initial resolving which is done in daemon.c (IIRC). Make sure you build your own Cw if you do this. Dan -- Dan Busarow 714 443 4172 DPC Systems / Beach.Net dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 From owner-freebsd-questions Sun Jun 1 16:28:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA13369 for questions-outgoing; Sun, 1 Jun 1997 16:28:31 -0700 (PDT) Received: from cedb.dpcsys.com (ns2.BEACH.net [209.25.4.3]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA13362 for ; Sun, 1 Jun 1997 16:28:23 -0700 (PDT) Received: from localhost (dan@localhost) by cedb.dpcsys.com (8.8.5/8.8.2) with SMTP id XAA02310; Sun, 1 Jun 1997 23:28:09 GMT Date: Sun, 1 Jun 1997 16:28:09 -0700 (PDT) From: Dan Busarow To: Almondale@aol.com cc: freebsd-questions@FreeBSD.ORG Subject: Re: IP Masquerading In-Reply-To: <970601172501_877375401@emout07.mail.aol.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 1 Jun 1997 Almondale@aol.com wrote: > invoked with -q, returns "no route to hosts" or "can't assign requested > address", and I get the effect described in the PPP manpages, namely the > gateway host can see the internet via my ISP but *is not forwarding* packets > back to my private LAN. I have invoked ppp with the -alias subcommand and set gateway="YES" in /etc/sysconfig > given the static route to my ISDN-modem-equipped Freebsd (2.2.1) machine, but > IP forwarding never seems to occur. I have even tried to remake the kernel > using MROUTED, but it seems to me routed itself *ought* to work? Anybody with You don't need routed. The ifconfig on your e-net will setup the route to your internal LAN. Dan -- Dan Busarow 714 443 4172 DPC Systems / Beach.Net dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 From owner-freebsd-questions Sun Jun 1 17:02:02 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA14931 for questions-outgoing; Sun, 1 Jun 1997 17:02:02 -0700 (PDT) Received: (from grog@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA14918 for FreeBSD-questions@FreeBSD.org; Sun, 1 Jun 1997 17:02:00 -0700 (PDT) Date: Sun, 1 Jun 1997 17:02:00 -0700 (PDT) From: Greg Lehey Message-Id: <199706020002.RAA14918@hub.freebsd.org> To: FreeBSD-questions@FreeBSD.org Subject: How to get best results from FreeBSD-questions Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk How to get the best results from FreeBSD questions. =================================================== Last update 17 October 1996. This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. ===================================================================== Contents: I: Introduction II: How to unsubscribe from FreeBSD-questions III: How to submit a question to FreeBSD-questions IV: How to answer a question to FreeBSD-questions I: Introduction =============== This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the "newcomers"), and also those who answer the questions (the "hackers"). Note that the term "hacker" has nothing to do with break- ing into other people's computers. The correct term for the latter activity is "cracker", but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions ============================================== When you subscribed to FreeBSD-questions, you got a welcome message from Majordomo@FreeBSD.ORG. In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions mailing list! If you ever want to remove yourself from this mailing list, you can send mail to "Majordomo@FreeBSD.ORG" with the following command in the body of your email message: unsubscribe freebsd-questions Greg Lehey Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send "how to" questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean that you have changed your mail ID since you subscribed. In this case, you do need to tell Majordomo the correct name, and that's when the welcome message from Majordomo comes in handy. If you have not kept it, all is not lost. Send a message to majordomo asking for the list of the members of the group. In the text of the message, write: who freebsd-questions The names returned in the list are not all individual mail IDs: you'll see a number of names like: freebsd-questions-list@datatec.com freebsd-questions-redist@news.uni-stuttgart.de incoming-freebsd-questions@cisco.com freebsd-questions@clinet.fi freebsd-questions@mcs.anl.gov If you're on one of these lists, you'll have to figure out which one it is and get your name taken off that one. If you're not sure which one it might be, check the headers of the messages you receive from freebsd-questions: maybe there's a clue there. IF ALL ELSE FAILS ----------------- If you've done all this, and you still can't figure out what's going on, send a message to Postmaster@FreeBSD.ORG, and he will sort things out for you. DON'T send a message to FreeBSD-questions: they can't help you. III: How to submit a question ============================== When submitting a question to FreeBSD-questions, consider the following points: 1. Remember that nobody gets paid for answering a FreeBSD question. They do it of their own free will. You can influence this free will positively by submitting a well-formulated question supplying as much relevant information as possible. You can influence this free will negatively by submitting an incomplete, illegible, or rude question. It's perfectly possible to send a message to FreeBSD-questions and not get an answer. In the rest of this document, we'll look at how to get the most out of your question to FreeBSD-questions. 2. Not everybody who answers FreeBSD questions reads every message: they look at the subject line and decide whether it interests them. Clearly, it's in your interest to specify a subject. "FreeBSD problem" or "Help" aren't enough. If you provide no subject at all, many people won't bother reading it. If your subject isn't specific enough, the people who can answer it may not read it. 3. Format your message so that it is legible, and PLEASE DON'T SHOUT!!!!!. We appreciate that a lot of people don't speak English as their first language, and we try to make allowances for that, but it's really painful to try to read a message written full of typos or without any line breaks. A lot of badly formatted messages come from bad mailers. The mailers in the Microsoft world are frequent offenders. If at all possible, use a UNIX mailer. If you must use a mailer under Microsoft environments, make sure it is set up correctly. Try not to use MIME: a lot of people use mailers which don't get on very well with MIME. 4. Make sure your time and time zone are set correctly. This may seem a little silly, since your message still gets there, but many of the people you are trying to reach get several hundred messages a day. They frequently sort the incoming messages by subject and by date, and if your message doesn't come before the first answer, they may assume they missed it and not bother to look. 5. Don't include unrelated questions in the same message. Firstly, a long message tends to scare people off, and secondly, it's more difficult to get all the people who can answer all the questions to read the message. 6. Specify as much information as possible. This is a difficult area, and we need to expand on what information you need to submit, but here's a start: - If you get error messages, don't say "I get error messages", say (for example) "I get the error message 'No route to host'". - If your system panics, don't say "My system panicked", say (for example) "my system panicked with the message 'free vnode isn't'". - If you have difficulty installing FreeBSD, please tell us what hardware you have. In particular, it's important to know the IRQs and I/O addresses of the boards installed in your machine. 7. If you do all this, and you still don't get an answer, there could be other reasons. For example, the problem is so complicated that nobody knows the answer, or the person who does know the answer was offline. If you don't get an answer after, say, a week, it might help to re-send the message. If you don't get an answer to your second message, though, you're probably not going to get one from this forum. Resending the same message again and again will only make you unpopular. To summarize, let's assume you know the answer to the following question. You choose which of these two questions you would be more prepared to answer: Message 1: Subject: (none) I just can't get hits damn silly FereBSD system to workd, and Im really good at this tsuff, but I have never seen anythign sho difficult to install, it jst wont work whatever I try so why don't y9ou guys tell me what I doing wrong. ---------------------------------------------------------------------- Message 2: Subject: Problems installing FreeBSD I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm having a lot of difficulty installing it. I have a 66 MHz 486 with 16 MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball disk and a Toshiba 3501XA CD-ROM drive. The installation works just fine, but when I try to reboot the system, I get the message "Missing Operating System". ---------------------------------------------------------------------- IV: How to answer a question ============================ Before you answer a question to FreeBSD-questions, consider: 1. A lot of the points on submitting questions also apply to answering questions. Read them. 2. Has somebody already answered the question? The easiest way to check this is to sort your incoming mail by subject: then (hopefully) you'll see the question followed by any answers, all together. If somebody has already answered it, it doesn't automatically mean that you shouldn't send another answer. But it makes sense to read all the other answers first. 3. Do you have something to contribute beyond what has already been said? In general, "Yeah, me too" answers don't help much, although there are exceptions, like when somebody is describing a problem he's having, and he doesn't know whether it's his fault or whether there's something wrong with the hardware or software. If you do send a "me too" answer, you should also include any further relevant information. 4. Are you sure your answer is correct? If not, wait a day or so. If nobody else comes up with a better answer, you can still reply and say, for example, "I don't know if this is correct, but since nobody else has replied, why don't you try replacing your ATAPI CD-ROM with a frog?". 5. Don't do a group reply; lots of people send messages with hundreds of CCs. Unless there's a good reason to do otherwise, just reply to the person and copy FreeBSD-questions. 6. Trim the original message to the minimum, and use some technique to identify which text came from the original message, and which text you add. I personally find that prepending "> " to the original message works best. Leaving white space after the ">" and leave empty lines between your text and the original text both make the result more readable. Most mailers change the subject line on a reply by prepending a text such as "Re: ". If your mailer doesn't do it automatically, you should do it manually. If the submitter didn't abide by format conventions (lines too long, inappropriate subject line), *please* fix it. In the case of an incorrect subject line (such as "HELP!!??"), change the subject line to (say) "Re: Difficulties with sync PPP (was: HELP!!??)". That way other people trying to follow the thread will have less difficulty following it. In such cases, it's appropriate to say what you did and why you did it, but try not to be rude. If you find you can't answer without being rude, don't answer. If you just want to reply to a message because of its bad format, just reply to the submitter, not to the list. You can just send him this message in reply, if you like. From owner-freebsd-questions Sun Jun 1 17:02:02 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA14933 for questions-outgoing; Sun, 1 Jun 1997 17:02:02 -0700 (PDT) Received: (from grog@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA14920 for FreeBSD-questions@FreeBSD.org; Sun, 1 Jun 1997 17:02:01 -0700 (PDT) Date: Sun, 1 Jun 1997 17:02:01 -0700 (PDT) From: Greg Lehey Message-Id: <199706020002.RAA14920@hub.freebsd.org> To: FreeBSD-questions@FreeBSD.org Subject: Errata and addenda in "The Complete FreeBSD" Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, "The Complete FreeBSD", published by Walnut Creek, is no exception. Since going to press, a number of anomalies have surfaced. The following is a list of modifications which go beyond simple typos. They relate to the first edition, formatted on 19 July 1996 (at the time of writing the only edition that is available). If you have this book, please check this list. I apply these changes to the current source of the book, so if you buy a later edition, they will be in it as well. If you find a bug or a suspected bug in the book, please contact me (grog@freebsd.org). --- Changes: 5 December 1996 --- Page 192: Middle of the page, the indented small print comment. Replace with: If your system doesn't have the directory /usr/src/sys, then the kernel source has not been installed. To install from the CD-ROM, perform the following steps: # mkdir -p /usr/src/sys # ln -s /usr/src/sys /sys # cd / # cat /cdrom/dists/src/sys.* | tar xzvf - The symbolic link /sys for /usr/src/sys is not strictly necessary, but it's a good idea: some software uses it, and otherwise you may end up with two different copies of the sources. --- Changes: 28 November 1996 --- Page 135, second paragraph: replace with In addition, you may need to create the device nodes if they don't already exist. By default, the system contains four virtual terminal devices in the /dev directory. If you use more than this number, you must create them, either with MAKEDEV (see page 162), or with mknod (see page 573). When calculating how many devices you need, note that if you intend to run X11, you need a terminal device without a getty for the X server. For example, if you have enabled /dev/ttyv3, /dev/ttyv4, and /dev/ttyv5, and you also want to run X, you will need a total of 7 virtual terminals (/dev/ttyv0 through /dev/ttyv6). With MAKEDEV, you specify how many virtual terminals you need: # cd /dev # ./MAKEDEV vty7 make 7 vtys Alternatively, you can do this with mknod: # cd /dev # ls -l ttyv0 crw------- 1 root wheel 12, 0 Nov 28 10:25 ttyv0 # mknod ttyv3 c 12 3 # mknod ttyv4 c 12 4 # mknod ttyv5 c 12 5 # mknod ttyv6 c 12 6 In this example, you list the entry for /dev/ttyv0 in order to check the major device number of the virtual terminals (that's the 12, in this example; it may change from one release to another). You need to specify this number to mknod. For more details about major and minor device numbers, see page 160. --- Changes: 20 November 1996 --- Figure 10-4, page 172: The devices in the FreeBSD slice are called /dev/sd1s2a through /dev/sd1s2h, not /dev/sd1s3a through /dev/sd1s3h as shown. Figure 10-6, page 176: The devices in the FreeBSD slice are *still* called /dev/sd1s2a through /dev/sd1s2h, not /dev/sd1s1a through /dev/sd1s1h as shown. (Well, at least the average turned out right :-) The man page section (pages 225 to 766) was sorted by ASCII name of the man page, with the result that the man pages whose names start with upper-case letters come before those whose names start with lower-case letters. Sorry about that. If you're looking for a man page, probably the best place to start is in the Table of Contents on page vi. The man pages are really just excerpts. The total FreeBSD man pages format to some 6,000 pages, far more than I could possibly put in this book. --- Changes: 1 November 1996 --- Major changes: 1. No difference in installation from ATAPI CD-ROM drives. When "The Complete FreeBSD" was written, you still needed a separate installation procedure for installing from ATAPI CD-ROM drives. This is no longer the case. The following modifications to the text come as a result: Page 14, table: Remove references to atapiflp.bat and inst_ide.bat. FreeBSD 2.1.5 no longer has separate boot floppies and installation procedures for ATAPI CD-ROM drives. Page 29: Remove the text "You will also need a different boot disk (/cdrom/floppies/atapi.flp). If you are creating the boot floppy with MS-DOS, you can use the file ATAPIFLP.BAT to create the floppy." The resultant text reads: IDE CD-ROM drives, more properly called ATAPI CD-ROM drives, are a new kind of CD-ROM drive which connect to the same controller as your IDE hard disk. Currently, FreeBSD 2.1.5 support for ATAPI CD-ROM drives is in alpha test. In order to install from an ATAPI CD-ROM, the drive must be jumpered as slave device. The installation may or may not work--please let us know if it doesn't, especially if you can give us some indication about the cause of the trouble. You can also create this boot diskette with the aid of the VIEW program (see Chapter 4, Installing FreeBSD, page 38). Page 35: Remove the points referring to atapi.flp. The text for the third box from the bottom of the page should read: If the direct boot doesn't work, you will need to make a boot floppy, which may be either a 3 1/2" or a 5 1/4" diskette. Create a boot floppy by copying the image /cdrom/boot.flp to diskette. Refer to Chapter 2, Installing FreeBSD, page 39. If you have an IDE (ATAPI) CD-ROM drive, see also the section on this kind of drive in Chapter 2, Installation Concepts, page 29. Page 43, after first example: remove references to ATAPI. The resultant text should read: Don't try this from MS Windows--the installation will fail with the message not enough memory. The boot will progress in the same way as if you had booted from floppy. The advantage of starting VIEW is that you get more documentation: ultimately VIEW will start INSTALL to boot the system. INSTALL doesn't always work. It depends on what drivers or TSRs are in your system. There's no reason to try changing your MS-DOS configuration to get it to work: it's a lot easier just to boot from floppy (see page 38 for further information). 2. Changes to section on installing a second disk. Page 170: The bottom paragraph should read: When the message Three seconds until format begins... appears, you can still change your mind by hitting CTRL-C before the message Formatting... appears. After that, you can't stop the format: most disks can perform a format by themselves, so scsiformat just issues the command to format the disk. Since there is no SCSI bus activity, the disk activity lamp will also not light up, and since the scsiformat program will just be waiting and not using any CPU time, you could easily get the impression the nothing is going on. The disk format can take a long time--depending on the disk, up to 90 minutes. Page 173, after table 10-5: Add the text If you're unlucky, fdisk will give you a completely different idea of the disk geometry from what scsiformat did. Possibly you can decide by examination which program is wrong, or maybe you can look at the dmesg output for a tie-breaker. In all cases I have seen, it has been fdisk that returned the incorrect information, and only when the disk did not have a valid partition table. For example, this happened with a disk formatted for BSD/OS: # scsiformat sd1 MICROP 2112-15MQ1094802 HQ48 Mode data length: 35 Medium type: 0 Device Specific Parameter: 0 Block descriptor length: 8 Density code: 0 Number of blocks: 2051615 Reserved: 0 Block length: 512 PS: 1 Reserved: 0 Page code: 4 Page length: 22 Number of Cylinders: 1760 Number of Heads: 15 Starting Cylinder-Write Precompensation: 0 Starting Cylinder-Reduced Write Current: 0 Drive Step Rate: 0 Landing Zone Cylinder: 0 Reserved: 0 RPL: 0 Rotational Offset: 0 Reserved: 0 Medium Rotation Rate: 5400 Reserved: 0 Reserved: 0 # fdisk sd1 ******* Working on device /dev/rsd1 ******* parameters extracted from in-core disklabel are: cylinders=160 heads=256 sectors/track=50 (12800 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=160 heads=256 sectors/track=50 (12800 blks/cyl) Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 0 is: sysid 255,(BBT (Bad Blocks Table)) start 1023744, size 2108293151 (1029440 Meg), flag 0 beg: cyl 768/ sector 15/ head 147; end: cyl 0/ sector 0/ head 255 The data for partition 1 is: sysid 101,(Novell Netware 3.xx) start 1646292846, size 1814062195 (885772 Meg), flag 0 beg: cyl 356/ sector 50/ head 0; end: cyl 256/ sector 50/ head 114 The data for partition 2 is: sysid 0,(unused) start 0, size 0 (0 Meg), flag 61 beg: cyl 364/ sector 37/ head 98; end: cyl 0/ sector 0/ head 0 The data for partition 3 is: Looking at the output from dmesg, we see: (aha0:1:0): "MICROP 2112-15MQ1094802 HQ48" type 0 fixed SCSI 2 sd1(aha0:1:0): Direct-Access 1001MB (2051615 512 byte sectors) sd1(aha0:1:0): with 1760 cyls, 15 heads, and an average 77 sectors/track In this case, then, you should use the parameters 1760 cylinders, 15 heads, and 77 sectors per track. What's less obvious here is the number of cylinders: fdisk doesn't have an opinion, and scsiformat and dmesg decided it has 2,051,615 sectors. Unfortunately, if you calculate the number according to the formula cylinders x heads x sectors, you'll come up with a different result: in this case 1760 x 15 x 77 = 2,032,800. How come? The disks report the total number of sectors, including spare tracks and such, but you can't use them all. The 2,032,800 is the correct number, and if you try to specify 2,051,615 to disklabel, it will spit out lots of messages about partitions which go beyond the end of the disk. Page 173, middle of page. Change the text after the "no magic" message to: The message no magic doesn't mean that fdisk is out of purple smoke. It refers to the fact that it didn't find the so-called magic number, which identifies the partition table. Since we don't have a partition table yet, this message isn't surprising. It's also completely harmless. Page 173, last example. Remove the first 22 lines, from ******* Working on device /dev/rsd1 ******* to, but not including the next occurrence of this line. Page 177, bulleted list: add the bullet * The total number of sectors in the partition. Calculate the number from the the formula cylinders x heads x sectors, even if you are using the whole disk: the output from dmesg or scsiformat is not correct here. Page 178, middle of page: after # disklabel -w -r /dev/sd1c cdc94161 insert When you do this, expect a kernel message (in high-intensity display) saying ``Cannot find disk label''. Since there isn't any label, it can't be found. This is another harmless chicken and egg problem. Page 182: In the section "Creating the file systems", add the first line to the example: # newfs /dev/rsd1h Further down the page, the last example should also read # newfs /dev/rsd1h 3. Other changes Page 41, after the heading "Installing from an MS-DOS partition". Add the text: It's also possible to install from a primary MS-DOS partition on the first disk. At the moment, it's not possible to install from extended partitions. Page 136, bottom: Add the text If you are changing the root password, be careful: it's easy enough to lock yourself out of the system if you mess things up, which could happen if, for example, you mistyped the password twice in the same way (don't laugh, it happens). If you're running X, open another window and use su to become root. If you're running in character mode, select another virtual terminal and log in as root there. Only when you're sure you can still access root should you log out. Page 152, just before the heading "The online manual". Add: Yes, you really need to run latex three times in order to build the cross-references. Page 199, the end of the multipage table is garbled. It should read: ze0 214 IBM/National Semiconductor PCMCIA ethernet controller zp0 214 3Com PCMCIA Etherlink III Page 205: Change the section titled "lpt0" to: lpt0 through lpt2 are the three printer ports you could conceivably have. Most people don't have three printers: you can comment out the definitions of the printers which you don't have. Page 208, bottom of page: swap the italicized headings "Adaptec 274X controller" and "Adaptec 1274X controller" Many thanks to Paul DuBois and Jerry Dunham for finding many of these bugs. From owner-freebsd-questions Sun Jun 1 17:58:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA16834 for questions-outgoing; Sun, 1 Jun 1997 17:58:31 -0700 (PDT) Received: from weenix.guru.org (phantasma.bevc.blacksburg.va.us [198.82.200.65]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA16829 for ; Sun, 1 Jun 1997 17:58:28 -0700 (PDT) Received: (from kmitch@localhost) by weenix.guru.org (8.8.5/8.8.5) id UAA01278 for questions@freebsd.org; Sun, 1 Jun 1997 20:58:25 -0400 (EDT) From: Keith Mitchell Message-Id: <199706020058.UAA01278@weenix.guru.org> Subject: PS/2 Mouse and Switch Box Problem To: questions@freebsd.org Date: Sun, 1 Jun 1997 20:58:25 -0400 (EDT) X-Mailer: ELM [version 2.4ME+ PL30 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have a couple of computers hooked together through a Belkin OmniView switchbox so I only need one mouse/keyboard/monitor. Right now, I have my PC and my thinkpad hooked up to it (although the thinkpad has its own mouse because of the way it handles the external mouse/keyboard). When the PC first boots (and is selected on the switch box) everything works fine. After I switch to the thinkpad and back then the mouse slows down considerable (ithe point moves at about half speed). NOTE: the only computer that is hooked to the mouse port on the switch box is the PC. I am using -current from 6/1/97 although it also failed with a kernel from about two weeks ago. I think it worked before then but I won't swear to it. Anyone ever seen this or know how to fix it?? Thanks. -- Keith Mitchell Head Administrator: acm.vt.edu Email: kmitch@weenix.guru.org PGP key available upon request http://weenix.guru.org/~kmitch From owner-freebsd-questions Sun Jun 1 19:14:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA19740 for questions-outgoing; Sun, 1 Jun 1997 19:14:11 -0700 (PDT) Received: from mail.rdu.bellsouth.net (mail.rdu.bellsouth.net [205.152.32.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA19734 for ; Sun, 1 Jun 1997 19:14:09 -0700 (PDT) Received: from d00030.rdu.bellsouth.net (d00030.rdu.bellsouth.net [207.53.8.31]) by mail.rdu.bellsouth.net (8.8.5/8.8.5) with SMTP id WAA11327 for ; Sun, 1 Jun 1997 22:14:19 -0400 (EDT) Received: by d00030.rdu.bellsouth.net with Microsoft Mail id <01BC6ED9.2957CDB0@d00030.rdu.bellsouth.net>; Sun, 1 Jun 1997 22:14:24 -0400 Message-ID: <01BC6ED9.2957CDB0@d00030.rdu.bellsouth.net> From: "Arthur P. Pesa" To: "'freebsd-questions@freebsd.org'" Subject: install help Date: Sun, 1 Jun 1997 22:14:22 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id TAA19736 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I have come upon a problem which I can not seem to overcome. I am trying to install 2.2.2-release on a rather average intel 486/dx4100 / 16M/1.6Gb system with an ethernet connection to a small tcp based network. The HD controller is a promise eide. controller, EIDE 3200plus. I have run win95 and NT 40 on this box as well as win 3.11. and Linux. I want a dedicated FreeBSD installation, no boot manager just FreeBSD. This is going to replace my Linux machine. The problem I am having occurs during an ftp installation from a local ftp server (NT server 4.0) I complete the visual kernel config, I deactivate any drivers I know I will not need. During probe everything is found corectly. I allocate the entire disk to freeBSD...I am not prompted to choose a bootmanager, as expected. I go to disk label editor and choose A then Q, just the defaults. I then choose #1 Developer from the dist menu and proceed to go to the ftp installation, choose my own ftp server via ip address no names. The install then begins to create the file system, holo shell, logs onto my ftp server and starts to copy the bin dist to / . This is where it always fails.. although not at the same place each time. During the bin dist copy I get a dump, which for a breif moment I am able to witness everything it does not enjoy. Namely: ANIC: segment not present fault Fatal Trap 12 page fault while in kernel mode Fault: Supervisor read page not present. It almosts sounds like a memory problem, ie corrupt simms etc. I have popped diferent simms in to see if that would help. It made no difference. I have also tried another disk, no help. I do have an Adaptec vlb scsi controller bus mastering type, but I need a scsi disk to install it. That makes the controller the only thing I have not tried to replace, lack of disk... I have run this install 10 - 15 times, once I made it to 97% of the way before it crapped out. I thought I had it. I am sure I will not be able to get this up and running without some info from the source. For the record I have read the online help from the boot floppy as well as spent several days looking at comp.unix.bsd.freebsd.misc , I have also scoured the Raleigh, NC area for the FreeBSD book. I will probably have to buy it from Walnut Creek. It is imposible to lsit all the things I have tried during the install. If you could point me in the right direction I am certain I will suceed. Thanks for your help.. Arthur Pesa. From owner-freebsd-questions Sun Jun 1 19:23:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA20067 for questions-outgoing; Sun, 1 Jun 1997 19:23:30 -0700 (PDT) Received: from postoffice.usa.net (postoffice.usa.net [192.156.196.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA20062 for ; Sun, 1 Jun 1997 19:23:26 -0700 (PDT) Received: from p166 (Cspenc@cnc128059.concentric.net [206.173.8.59]) by postoffice.usa.net (8.8.5/8.7.5) with SMTP id UAA29304 for ; Sun, 1 Jun 1997 20:21:52 -0600 (MDT) Message-Id: <3.0.32.19970601222600.00687c9c@pop.netaddress.usa.net> X-Sender: vampired@pop.netaddress.usa.net X-Mailer: Windows Eudora Pro Version 3.0 (32) Date: Sun, 01 Jun 1997 22:26:08 -0400 To: freebsd-questions@FreeBSD.ORG From: Christopher Subject: Is Token Ring supported in FreeBSD Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Is Token Ring supported in FreeBSD? If not, any plans? Nortorious MAC From owner-freebsd-questions Sun Jun 1 19:35:10 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA20533 for questions-outgoing; Sun, 1 Jun 1997 19:35:10 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA20528 for ; Sun, 1 Jun 1997 19:35:09 -0700 (PDT) Received: from ra1.randomc.com (root@ra1.randomc.com [205.160.16.20]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA06379 for ; Sun, 1 Jun 1997 19:34:32 -0700 (PDT) Received: from shiv (pm-atl8-port3.randomc.com [205.160.24.22]) by ra1.randomc.com (8.8.5/8.8.5) with SMTP id WAA02444 for ; Sun, 1 Jun 1997 22:30:13 -0400 (EDT) Message-Id: <3.0.32.19970601223114.006a1f80@ra1.randomc.com> X-Sender: sfi@ra1.randomc.com (Unverified) X-Mailer: Windows Eudora Pro Version 3.0 (32) Date: Sun, 01 Jun 1997 22:31:29 -0400 To: questions@freebsd.com From: Shashi Joshi Subject: FreeBSD installation problems Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, I have trouble during FreeBSD installation in two areas: 1. Installing X window: I reached upto the graphical configuration. I am unable to pick the proper graphic card/chip I have a Gateway 2000 CrystalScan monitor 17" 30-64 and 50-120 frequencies and STB Velocity and STB Virge/GX card I was able to install an start X as well (by typing startx) But I am not able to select ANY OTHER MODE except 320x200 I tried everything but it always starts in 320x200 mode (my monitor can take upto 1248x1024. When I run /stand/sysinstall and configure X thru the XF6Setup, it somehow knows the proper graphic mode to pick, since it sppears like a 800x600 mode 2. Installing/configuring for PPP protocol I am trying to dial out to my ISP via modem. when I type pppd it says the kernel does not support PPP I have installed comms/seyon. When asked during installation if I want PPP/SLIP I selected yes. It then asked if I wanted to configure for PPP. When I said yes, it went into ppp mode, which won't dial out. Please help me out on this, since this is very time critical to my project :((( Thanks you very very much Shashi Shift-F1, Inc. -------------------------------------------------------------------------- ShashiKant Joshi shashi@shift-f1.com Shift-F1, Inc. 770-424-6958 From owner-freebsd-questions Sun Jun 1 21:04:34 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA24317 for questions-outgoing; Sun, 1 Jun 1997 21:04:34 -0700 (PDT) Received: from Gforce.iamerica.net (iax-covington-ppp0008.iamerica.net [207.101.35.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA24312 for ; Sun, 1 Jun 1997 21:04:30 -0700 (PDT) Received: from Gforce.iamerica.net (localhost.iamerica.net [127.0.0.1]) by Gforce.iamerica.net (8.8.5/8.8.5) with ESMTP id XAA27804 for ; Sun, 1 Jun 1997 23:04:14 -0500 (CDT) Message-Id: <199706020404.XAA27804@Gforce.iamerica.net> X-Mailer: exmh version 2.0gamma 1/27/96 To: freebsd-questions@freebsd.org Subject: Encryption in Netscape From: Glenn Johnson Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 01 Jun 1997 23:04:14 -0500 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Greetings, I just installed the Netscape Communicator preview 5 port. When I launch Netscape, I get an error message about not having a valid encryption policy file. I did a symlink to the policyMoz40P1.jar file in /usr/local/lib/netscape, but this did not help. Any ideas, or is this something that is broken in this preview? Thanks. -- Glenn Johnson gljohnsn@iamerica.net From owner-freebsd-questions Sun Jun 1 21:40:15 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA25785 for questions-outgoing; Sun, 1 Jun 1997 21:40:15 -0700 (PDT) Received: from Gforce.iamerica.net (iax-covington-ppp0007.iamerica.net [207.101.35.16]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA25762; Sun, 1 Jun 1997 21:40:06 -0700 (PDT) Received: from Gforce.iamerica.net (localhost.iamerica.net [127.0.0.1]) by Gforce.iamerica.net (8.8.5/8.8.5) with ESMTP id XAA07595; Sun, 1 Jun 1997 23:39:25 -0500 (CDT) Message-Id: <199706020439.XAA07595@Gforce.iamerica.net> X-Mailer: exmh version 2.0gamma 1/27/96 To: freebsd-questions@freebsd.org cc: freebsd-current@freebsd.org Subject: GIMP From: Glenn Johnson Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 01 Jun 1997 23:39:25 -0500 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Has anyone else had trouble with the 'gimp-devel 0.99.9 port'? I am running 3.0 current and am getting the following: gmake[3]: Leaving directory `/usr/ports/graphics/gimp-devel/work/gimp-0.99.9/pl ug-ins/dgimp' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/usr/ports/graphics/gimp-devel/work/gimp-0.99.9/pl ug-ins' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/graphics/gimp-devel/work/gimp-0.99.9' gmake: *** [all-recursive-am] Error 2 *** Error code 2 Stop. *** Error code 1 Stop. *** Error code 1 Stop. Thanks for any help. -- Glenn Johnson gljohnsn@iamerica.net From owner-freebsd-questions Sun Jun 1 21:50:54 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA26303 for questions-outgoing; Sun, 1 Jun 1997 21:50:54 -0700 (PDT) Received: from dg-rtp.dg.com (dg-rtp.rtp.dg.com [128.222.1.2]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id VAA26297 for ; Sun, 1 Jun 1997 21:50:51 -0700 (PDT) Received: by dg-rtp.dg.com (5.4R3.10/dg-rtp-v02) id AA07740; Mon, 2 Jun 1997 00:50:14 -0400 Received: from ponds by dg-rtp.dg.com.rtp.dg.com; Mon, 2 Jun 1997 00:50 EDT Received: from lakes.water.net (lakes [10.0.0.3]) by ponds.water.net (8.8.5/8.7.3) with ESMTP id UAA04580; Sun, 1 Jun 1997 20:48:43 -0400 (EDT) Received: (from rivers@localhost) by lakes.water.net (8.8.5/8.6.9) id UAA18641; Sun, 1 Jun 1997 20:56:26 -0400 (EDT) Date: Sun, 1 Jun 1997 20:56:26 -0400 (EDT) From: Thomas David Rivers Message-Id: <199706020056.UAA18641@lakes.water.net> To: ponds!aol.com!Almondale, ponds!FreeBSD.ORG!freebsd-questions Subject: Re: IP Masquerading Content-Type: text Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > > The latest linux kernel includes support for IP Masquerading, so "private > lans" can share a dialup gateway. What (if any) support does FreeBSD have for > doing this. I have the most recent PPP binaries, but the routed command, when > invoked with -q, returns "no route to hosts" or "can't assign requested > address", and I get the effect described in the PPP manpages, namely the > gateway host can see the internet via my ISP but *is not forwarding* packets > back to my private LAN. I have invoked ppp with the -alias subcommand and > given the static route to my ISDN-modem-equipped Freebsd (2.2.1) machine, but > IP forwarding never seems to occur. I have even tried to remake the kernel > using MROUTED, but it seems to me routed itself *ought* to work? Anybody with > experience getting this setup to work? > > Thanks, > Alex > > FreeBSD version 2.2 introduced diverted sockets. I have been very happily using 'natd' which does this translation for some time now. I've copied the "README" below. - Dave Rivers - A Network Address Translation Daemon for FreeBSD 1. WHAT IS NATD ? This is a simple daemon based on FreeBSD divert sockets which performs network address translation (or masquerading) for IP packets (see related RFCs 1631 and 1918). It is based on packet aliasing package (see README.alias) written by Charles Mott (cmott@srv.net). This package works with any network interface (doesn't have to be ppp). I run it on a computer having two ethernet cards, one connected to internet and the other one to local network. 2. GETTTING IT RUNNING 1) Get FreeBSD 2.2 - I think the divert sockets are not available on earlier versions, 2) Compile this software by executing "make". 3) Compile your kernel with following options: options IPFIREWALL options IPDIVERT 4) Ensure that your host is a gateway by setting gateway=YES in /etc/sysconfig 5) Test the software. View the contents of natd.test and if it seems to be ok (it flushes ipfw entries) execute it: sh natd.test name-of-the-internet-interface For myself, the interface is ep0, so this would work for me: sh natd.test ep0 6) Try from other machines in local network if the connection works. You should see some output from natd when it is running and processing packets. Your other machines must be configured to use the machine running natd as gateway. 7) If things seem to work, you can start natd in /etc/rc.local and modify /etc/rc.firewall to include suitable entries for natd. For more information see natd manual page. 3. FTP SITES FOR NATD This package is available at ftp://kn6-045.ktvlpr.inet.fi/pub/natd. 4. AUTHORS This program is the result of the efforts of many people at different times: Archie Cobbs Divert sockets Charles Mott Packet aliasing engine Eivind Eklund Packet aliasing engine Ari Suutari Natd Brian Somers Manual page, glue and bunch of good ideas. The original package written by Charles Mott is available at http://www.srv.net/~cmott. It is described in README.alias. Happy Networking - comments and fixes are welcome! Ari S. (ari@kn6-045.ktvlpr.inet.fi, ari@ps.carel.fi) From owner-freebsd-questions Sun Jun 1 23:08:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA29366 for questions-outgoing; Sun, 1 Jun 1997 23:08:58 -0700 (PDT) Received: from netmug.org (root@netmug.org [207.88.42.250]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA29361 for ; Sun, 1 Jun 1997 23:08:55 -0700 (PDT) Received: from netmug.org (perl@localhost [127.0.0.1]) by netmug.org (8.8.5/8.8.5) with ESMTP id XAA09269 for ; Sun, 1 Jun 1997 23:08:36 -0700 (PDT) Message-Id: <199706020608.XAA09269@netmug.org> To: freebsd-questions@freebsd.org Subject: Maximum telnet connections Date: Sun, 01 Jun 1997 23:08:36 -0700 From: Michael Haro Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, How do I increase the maximum number of telnet connections. I just had 16 users logged into my computer, and when I tried to connect, telnetd told me that it couldn't accept any more connects. Why is this? How can I fix it? Thanks, Michael From owner-freebsd-questions Sun Jun 1 23:36:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA01268 for questions-outgoing; Sun, 1 Jun 1997 23:36:30 -0700 (PDT) Received: from iceberg.anchorage.net. (root@iceberg.anchorage.net [207.14.72.150]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id XAA01250 for ; Sun, 1 Jun 1997 23:36:19 -0700 (PDT) Received: from aak.anchorage.net (ai-131 [207.14.72.131]) by iceberg.anchorage.net. (8.6.11/8.7.3) with SMTP id VAA06199; Sun, 1 Jun 1997 21:33:03 -0800 Date: Sun, 1 Jun 1997 22:25:30 -0800 (AKDT) From: Steve Howe X-Sender: abc@aak.anchorage.net To: Andrejs Vanags cc: freebsd-questions@FreeBSD.ORG Subject: Re: a.out programs are not executable! cant run any programs.. In-Reply-To: <3390380B.6A28@crl.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 31 May 1997, Andrejs Vanags wrote: > I installed it and even recomplied the kernel with no problems. > However if I try to compile a simple hello.c program with gcc, the > result is a.out. If I type a.out it says command not found. If I say > file a.out it says it is a: if a.out isn't in your $PATH, you must say "./a.out". ------------------------------------------------------------------------- Sleep: a sign a caffeine deprivation ... http://www.anchorage.net/~un_x ------------------------------------------------------------------------- From owner-freebsd-questions Sun Jun 1 23:43:51 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA01735 for questions-outgoing; Sun, 1 Jun 1997 23:43:51 -0700 (PDT) Received: from radford.i-plus.net (root@Radford.i-Plus.net [206.99.237.6]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA01730 for ; Sun, 1 Jun 1997 23:43:48 -0700 (PDT) Received: from abyss (pitlord@Abyss.i-plus.net [206.99.237.44]) by radford.i-plus.net (8.8.5/8.8.5) with SMTP id CAA20249; Mon, 2 Jun 1997 02:42:30 -0400 (EDT) Message-Id: <199706020642.CAA20249@radford.i-plus.net> X-Mailer: Microsoft Outlook Express 4.71.0544.0 From: "Troy Settle" To: , "Michael Haro" Subject: Re: Maximum telnet connections Date: Mon, 2 Jun 1997 02:43:13 -0400 X-Priority: 3 X-MSMail-Priority: Normal MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-MimeOLE: Produced By Microsoft MimeOLE Engine V4.71.0544.0 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk From: Michael Haro >Hi, > >How do I increase the maximum number of telnet connections. I just had 16 >users logged into my computer, and when I tried to connect, telnetd told me >that it couldn't accept any more connects. > >Why is this? How can I fix it? > The answer lies within your kernel config file. pseudo-device pty 16 change this to whatever you think you'll need. You may need to create the devices in /dev as well. -- Troy Settle Network Administrator, iPlus Internet Services http://www.i-Plus.net From owner-freebsd-questions Sun Jun 1 23:52:17 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA02424 for questions-outgoing; Sun, 1 Jun 1997 23:52:17 -0700 (PDT) Received: from sax.sax.de (sax.sax.de [193.175.26.33]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id XAA02411 for ; Sun, 1 Jun 1997 23:52:12 -0700 (PDT) Received: (from uucp@localhost) by sax.sax.de (8.6.12/8.6.12-s1) with UUCP id IAA22640; Mon, 2 Jun 1997 08:52:08 +0200 Received: (from j@localhost) by uriah.heep.sax.de (8.8.5/8.8.5) id IAA09336; Mon, 2 Jun 1997 08:40:44 +0200 (MET DST) Message-ID: <19970602084038.EZ54150@uriah.heep.sax.de> Date: Mon, 2 Jun 1997 08:40:38 +0200 From: j@uriah.heep.sax.de (J Wunsch) To: mango@staff.communique.net (Raul Zighelboim) Cc: questions@FreeBSD.ORG Subject: Re: 2.2.2-Release and SMC/3com PCI cards.... References: X-Mailer: Mutt 0.60_p2-3,5,8-9 Mime-Version: 1.0 X-Phone: +49-351-2012 669 X-PGP-Fingerprint: DC 47 E6 E4 FF A6 E9 8F 93 21 E0 7D F9 12 D6 4E Reply-To: joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) In-Reply-To: ; from Raul Zighelboim on Jun 1, 1997 20:48:05 -0500 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk (redirected to -questions) As Raul Zighelboim wrote: > I attempted to upgrade my server to 2.2.2 from 2.1.7 last night. > The install floppy identified both my SMC and 3C595 PCI Ethernet cards, > but was unable to use either one; it would time out when trying to > contact the DNS server. You should be more specific about your setup. Many people (including me) use these cards. SMC is a fairly weak term: it can be anything between a WD8003 and a 100 Mbit/s card using the DEC chipset. Make sure you've got the correct medium selected. When in doubt, don't use autoselect, but use the DOS program accompanying the card, and force it to use BNC or UTP or whatever. Also, watch the boot messages. The drivers usually tell you what they think they have found. -- cheers, J"org joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-) From owner-freebsd-questions Mon Jun 2 00:50:53 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA05254 for questions-outgoing; Mon, 2 Jun 1997 00:50:53 -0700 (PDT) Received: from iceberg.anchorage.net. (root@iceberg.anchorage.net [207.14.72.150]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id AAA05248 for ; Mon, 2 Jun 1997 00:50:45 -0700 (PDT) Received: from aak.anchorage.net (ai-131 [207.14.72.131]) by iceberg.anchorage.net. (8.6.11/8.7.3) with SMTP id WAA06376; Sun, 1 Jun 1997 22:47:32 -0800 Date: Sun, 1 Jun 1997 23:39:58 -0800 (AKDT) From: Steve Howe X-Sender: abc@aak.anchorage.net To: jsteckro@bas.k12.mi.us cc: freebsd-questions@FreeBSD.ORG Subject: Re: modem In-Reply-To: <32CA0444.1752@scnc.bas.k12.mi.us> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, 1 Jan 1997, jsteckro wrote: > I have a 33.6 modem but yet it connects at 28.8?? Why doesn't it > connect at my modem speed? because the modem on the other end can't talk 33.6. ------------------------------------------------------------------------- Sleep: a sign a caffeine deprivation ... http://www.anchorage.net/~un_x ------------------------------------------------------------------------- From owner-freebsd-questions Mon Jun 2 01:03:27 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA06043 for questions-outgoing; Mon, 2 Jun 1997 01:03:27 -0700 (PDT) Received: from gateway.ormond.unimelb.edu.au (gateway.ormond.unimelb.edu.au [203.17.189.194]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA06030 for ; Mon, 2 Jun 1997 01:03:09 -0700 (PDT) Received: (from gavin@localhost) by gateway.ormond.unimelb.edu.au (8.8.3/8.6.9) id SAA29845 for questions@freebsd.org; Mon, 2 Jun 1997 18:03:03 +1000 (EST) From: Gavin Cameron Message-Id: <199706020803.SAA29845@gateway.ormond.unimelb.edu.au> Subject: swap_pager: indefinite wait buffer error To: questions@freebsd.org Date: Mon, 2 Jun 1997 18:03:02 +1000 (EST) X-Mailer: ELM [version 2.4 PL24] Content-Type: text Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Can someone tell we what the following error message means, swap_pager: indefinite wait buffer: device 131073, blkno: 4312, size: 8192 After this message came up the disks (3 IDE drives) just kept churning and I had to press the reset button. The machine wasn't doing anything at the time. The machine is running 2.2-STABLE as of the 25th of May. TIA Gavin -- []------------------------------------+-------------------------------------[] | Gavin Cameron | Ormond College | | Ph : +61 3 9344 1201 | The University of Melbourne | | Fax : +61 3 9344 1111 | Parkville, Victoria | | Email : gavin@ormond.unimelb.edu.au | Australia, 3052 | []------------------------------------+-------------------------------------[] From owner-freebsd-questions Mon Jun 2 01:22:54 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA06926 for questions-outgoing; Mon, 2 Jun 1997 01:22:54 -0700 (PDT) Received: from helbig.informatik.ba-stuttgart.de (helbig.informatik.ba-stuttgart.de [141.31.166.22]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA06917 for ; Mon, 2 Jun 1997 01:22:50 -0700 (PDT) Received: (from helbig@localhost) by helbig.informatik.ba-stuttgart.de (8.8.5/8.8.5) id KAA00607; Mon, 2 Jun 1997 10:22:25 +0200 (MET DST) From: Wolfgang Helbig Message-Id: <199706020822.KAA00607@helbig.informatik.ba-stuttgart.de> Subject: Re: Maximum telnet connections In-Reply-To: <199706020608.XAA09269@netmug.org> from Michael Haro at "Jun 1, 97 11:08:36 pm" To: perl@netmug.org (Michael Haro) Date: Mon, 2 Jun 1997 10:22:25 +0200 (MET DST) Cc: freebsd-questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL30 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Hi, > > How do I increase the maximum number of telnet connections. I just had 16 > users logged into my computer, and when I tried to connect, telnetd told me > that it couldn't accept any more connects. > > Why is this? How can I fix it? Probably not enough pseudo terminals in /dev and/or in your kernel. Do a # cd /dev # MAKEDEV pty1 This will create 32 (or 16 depending on the version of your FreeBSD) additional pseudo terminals in you /dev directory. If you have enough special files (/dev/ptyp? and /dev/ttyp?) you should increase the number of pseudo terminals your kernel is supporting. Change the pseudo-device pty 16 line in your kernel configuration file to pseudo-device pty 32 Wolfgang From owner-freebsd-questions Mon Jun 2 02:44:00 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA09836 for questions-outgoing; Mon, 2 Jun 1997 02:44:00 -0700 (PDT) Received: from blinx.lizard.org (blinx.wms.co.uk [194.159.247.13]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA09815 for ; Mon, 2 Jun 1997 02:43:57 -0700 (PDT) Received: (from flipper@localhost) by blinx.lizard.org (8.8.5/8.7.3) id KAA22854 for questions@freebsd.org; Mon, 2 Jun 1997 10:50:39 +0100 (BST) From: Flipper Spice Message-Id: <199706020950.KAA22854@blinx.lizard.org> Subject: configuring ipfw To: questions@freebsd.org Date: Mon, 2 Jun 1997 10:50:39 +0100 (BST) X-Mailer: ELM [version 2.4ME+ PL22 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I need some advice on configure ipfw for a /28 network. What I want to do is to create two /29's, one for machines outside of the firewall (firewall will on this network) and the other for machine behind the firewall. Ive configured two interfaces for the firewall, outside and inside. The question is how do I get ipfw two forward packets from the inside to the outside? Do I use the inside interface as the default route for all machines behind the firewall? Regards Dal From owner-freebsd-questions Mon Jun 2 04:15:52 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA13386 for questions-outgoing; Mon, 2 Jun 1997 04:15:52 -0700 (PDT) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id EAA13379 for ; Mon, 2 Jun 1997 04:15:42 -0700 (PDT) Received: (from smap@localhost) by gatekeeper.barcode.co.il (8.8.5/8.6.12) id OAA03855; Mon, 2 Jun 1997 14:14:46 +0300 (IDT) X-Authentication-Warning: gatekeeper.barcode.co.il: smap set sender to using -f Received: from localhost.barcode.co.il(127.0.0.1) by gatekeeper.barcode.co.il via smap (V1.3) id sma003853; Mon Jun 2 14:14:36 1997 Message-ID: <3392AB16.3E6A@barcode.co.il> Date: Mon, 02 Jun 1997 14:14:30 +0300 From: Nadav Eiron X-Mailer: Mozilla 3.0 (X11; I; SunOS 5.5 sun4m) MIME-Version: 1.0 To: Christopher CC: freebsd-questions@FreeBSD.ORG Subject: Re: Is Token Ring supported in FreeBSD References: <3.0.32.19970601222600.00687c9c@pop.netaddress.usa.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Christopher wrote: > > Is Token Ring supported in FreeBSD? If not, any plans? > Nortorious MAC Currently not. I don't know of any actual plans, though there were talks about people writing a driver. Try the archives to find these people. Other than that, you're welcome to make your own (plans for a) driver :-) Nadav From owner-freebsd-questions Mon Jun 2 04:49:00 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA14867 for questions-outgoing; Mon, 2 Jun 1997 04:49:00 -0700 (PDT) Received: from server.sei.co.id ([202.159.99.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id EAA14856 for ; Mon, 2 Jun 1997 04:48:45 -0700 (PDT) Message-Id: <199706021148.EAA14856@hub.freebsd.org> Received: from cyber6.sei.co.id (S03.sei.co.id [202.159.99.26]) by server.sei.co.id (post.office MTA v2.0 0813 ID# 0-0U10) with ESMTP id AAA302 for ; Mon, 2 Jun 1997 18:49:21 +0700 From: "Shinwa" To: Subject: salam jitak Date: Mon, 2 Jun 1997 18:51:17 +0700 X-MSMail-Priority: Normal X-Priority: 3 X-Mailer: Microsoft Internet Mail 4.70.1161 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-2022-JP Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk kadek.... om suastiastu, kali ini aku muncul sebagai kawan lama yang tentunya sangat .... aku yakin kamunya selalu bahagia dengan keberadaan-NYA di sisimu. semula aku tidak menyangka kalau kamu itu adalah pendamping dan didampingi-NYA. aku salut ama kesuksesan mu itu dan selamat menikmati jerih payah mu yang selama ini kamu geluti. berbahagia selalu and salam hangat buat kawan - kawan yang yain. ingat kapabelitas mu di tunggu !!! hal yang pasti pada suatu saat nanti. aku tunggu kabar balik mu, boleh di skytel 13011 ID. 8027274 om santhi-santhi-santhi om om sai ram byyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy kirim balik ke : made-murdock@usa.net From owner-freebsd-questions Mon Jun 2 04:49:35 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA14939 for questions-outgoing; Mon, 2 Jun 1997 04:49:35 -0700 (PDT) Received: from maiser.unila.ac.id (maiser.unila.ac.id [167.205.153.147]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id EAA14900 for ; Mon, 2 Jun 1997 04:49:08 -0700 (PDT) Received: (from muji@localhost) by maiser.unila.ac.id (8.7.5/8.7.3) id TAA15651; Mon, 2 Jun 1997 19:47:23 +0700 (JVT) Date: Mon, 2 Jun 1997 19:47:23 +0700 (JVT) From: "Muji r.r" To: support@cdrom.com cc: questions@freebsd.org Subject: popper and qpop2.1.4.3 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk dear sir, i try to install FreeBSD 221 packages for popper and qpop2.1.4.3 but i can't find it on the cd rom (FreeBSD 2.2.1 both CD's) is there is any solution for it? thank you From owner-freebsd-questions Mon Jun 2 05:17:56 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16066 for questions-outgoing; Mon, 2 Jun 1997 05:17:56 -0700 (PDT) Received: from emout14.mail.aol.com (emout14.mx.aol.com [198.81.11.40]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA16060 for ; Mon, 2 Jun 1997 05:17:49 -0700 (PDT) From: Almondale@aol.com Received: (from root@localhost) by emout14.mail.aol.com (8.7.6/8.7.3/AOL-2.0.0) id IAA07821 for freebsd-questions@freebsd.org; Mon, 2 Jun 1997 08:14:37 -0400 (EDT) Date: Mon, 2 Jun 1997 08:14:37 -0400 (EDT) Message-ID: <970602081435_-895257799@emout14.mail.aol.com> To: freebsd-questions@freebsd.org Subject: Re: IP Masquerading Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk The whole main issue is that the "ping" command will probably *not* work under most forms of IP masquerading/aliasing (don't know about NAT). It's sort of interesting just what commands do and don't work when you are working with "virtual private networks" as microsoft calls them. I think in short it would be neat if this (NAT or ppp -alias) code could be put on the ROM chip of a NIC! In a message dated 97-06-01 19:19:33 EDT, you write: << I would have to see what your routing table looks like to help more, but you probably will have this aced by the time you get this and could send it along. Like I said, I am not familiar with fBSD's ways (why I read this list's mail), but have seen more than one PPP host handle forwarding for a LAN. The most common problem I recall is not setting the forwarding for the LAN (Ethernet card) to pass things on via the PPP device. If you can ping the PPP device from a LAN client, but not get past that, you may find the problem there. Also, if you can dial-in to the ISP from a client and ping the PPP host, but no further, the problem is in the other direction (not what you described here). >> From owner-freebsd-questions Mon Jun 2 05:27:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16491 for questions-outgoing; Mon, 2 Jun 1997 05:27:39 -0700 (PDT) Received: from federation.addy.com (federation.addy.com [207.239.68.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA16484 for ; Mon, 2 Jun 1997 05:27:34 -0700 (PDT) Received: from localhost (fbsdlist@localhost) by federation.addy.com (8.8.5/8.6.12) with SMTP id IAA02843 for ; Mon, 2 Jun 1997 08:27:30 -0400 (EDT) Date: Mon, 2 Jun 1997 08:27:29 -0400 (EDT) From: Cliff Addy To: questions@freebsd.org Subject: OFF TOPIC: cisco purchasing Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk First, let me apologize for the off-topic post, but this group has been such an excellent source of networking information that I can't pass it up :) Does anyone know of a rock-bottom source for cisco 2501 routers and digital link CSU/DSUs? We need backup units, so cheap is best. Thanks, Cliff From owner-freebsd-questions Mon Jun 2 05:29:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16614 for questions-outgoing; Mon, 2 Jun 1997 05:29:14 -0700 (PDT) Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA16608 for ; Mon, 2 Jun 1997 05:29:08 -0700 (PDT) Received: from buffnet9.buffnet.net (buffnet9.buffnet.net [205.246.19.19]) by buffnet4.buffnet.net (8.7.5/8.7.3) with SMTP id IAA26221; Mon, 2 Jun 1997 08:29:31 -0400 (EDT) Received: from buffnet11.buffnet.net(205.246.19.55) by buffnet9.buffnet.net via smap (V2.0) id xma006544; Mon, 2 Jun 97 08:27:58 -0400 Date: Mon, 2 Jun 1997 08:29:16 -0400 (EDT) From: Steve To: Michael Haro cc: freebsd-questions@FreeBSD.ORG Subject: Re: Maximum telnet connections In-Reply-To: <199706020608.XAA09269@netmug.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk You need to increase the max users in the kernal config and recompile your kernal - and you need to add ttys/ptys (MAKEDEV) if you need them. On Sun, 1 Jun 1997, Michael Haro wrote: > Hi, > > How do I increase the maximum number of telnet connections. I just had 16 > users logged into my computer, and when I tried to connect, telnetd told me > that it couldn't accept any more connects. > > Why is this? How can I fix it? > > Thanks, > Michael > From owner-freebsd-questions Mon Jun 2 06:01:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA17983 for questions-outgoing; Mon, 2 Jun 1997 06:01:11 -0700 (PDT) Received: from ns.russianet.ru (russianet.ru [194.84.155.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA17962; Mon, 2 Jun 1997 06:01:01 -0700 (PDT) Received: (from sergey@localhost) by ns.russianet.ru (8.8.5/8.8.5) id RAA07723; Mon, 2 Jun 1997 17:00:54 +0400 (MSD) From: Sergey Vnotchenko Message-Id: <199706021300.RAA07723@ns.russianet.ru> Subject: DOSEMU port To: freebsd-questions@FreeBSD.ORG, freebsd-emulation@FreeBSD.ORG Date: Mon, 2 Jun 1997 17:00:53 +0400 (MSD) X-Mailer: ELM [version 2.4ME+ PL25 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi,all! Does somebody port DOSEMU under FreeBSD 2.2? I've seen no VM86 in FreeBSD's kernel code, but DOSEMU hardly depends on it:(. Thanks in advance, Sergey. From owner-freebsd-questions Mon Jun 2 06:04:49 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA18144 for questions-outgoing; Mon, 2 Jun 1997 06:04:49 -0700 (PDT) Received: from ibmmail.COM (ibmmail.com [204.146.168.193]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id GAA18136 for ; Mon, 2 Jun 1997 06:04:42 -0700 (PDT) From: deccp7f8@ibmmail.com Message-Id: <199706021304.GAA18136@hub.freebsd.org> Received: from ibmmail by ibmmail.COM (IBM VM SMTP V2R3) with BSMTP id 5324; Mon, 02 Jun 97 09:04:40 EDT Date: Mon, 02 Jun 1997 09:04:40 EDT To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: RTL8029 ??? Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk --- Received from L.LS91SOM (0711)663-1589 02.06.97 14.16 -> SM.IBMMAIL.INTERNET -: - - - - - - - - - - > BENUTZER IM IBM SCREENMAIL Dear Sirs, just one question about compatible ethernet cards : I?m running FreeBSD 2.1.5 as a WebServer and now I?m trying to connect some local clients to the server via a LanTech PCI-Net/32 CT ethernet card which works with a Realtek RTL8029 chipset, but FreeBSD can?t handle the card. Is there a solution, like a new driver, recommended kernel patch or something like this ... ? For your answer thanks a lot in advance ... Dirk From owner-freebsd-questions Mon Jun 2 06:38:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA19440 for questions-outgoing; Mon, 2 Jun 1997 06:38:44 -0700 (PDT) Received: from agora.rdrop.com (root@agora.rdrop.com [199.2.210.241]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA19435 for ; Mon, 2 Jun 1997 06:38:42 -0700 (PDT) Received: from teligent.se (iservern.teligent.se [194.17.198.3]) by agora.rdrop.com (8.8.5/8.8.5) with ESMTP id GAA03939 for ; Mon, 2 Jun 1997 06:38:21 -0700 (PDT) Received: from englund.teligent.se (englund.teligent.se [192.168.2.197]) by teligent.se (8.7/8.6.12) with SMTP id PAA28901 for ; Mon, 2 Jun 1997 15:35:25 +0200 Message-ID: <3392CD2A.22E0@teligent.se> Date: Mon, 02 Jun 1997 15:39:54 +0200 From: Christer Englund X-Mailer: Mozilla 3.01Gold (Win95; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: Strange message in FreeBSD ver 2.2.2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk I have installed FreeBSD 2.2.2 in one of my computers, and my problem is that the system reports this message: inetd login_get class:unknown class `root` What is going on? Is this a problem? Thank You !! Christer Englund englund@teligent.se Teligent AB Sweden From owner-freebsd-questions Mon Jun 2 06:42:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA19624 for questions-outgoing; Mon, 2 Jun 1997 06:42:31 -0700 (PDT) Received: from cc.berkshire.org (root@cc.berkshire.org [208.200.68.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA19618 for ; Mon, 2 Jun 1997 06:42:29 -0700 (PDT) Received: from peterson (peterson.cc.berkshire.org [208.200.69.47]) by cc.berkshire.org (8.8.4/8.7.3) with SMTP id JAA26905; Mon, 2 Jun 1997 09:56:20 -0400 (EDT) Message-ID: <3392FB7F.10AE@cc.berkshire.org> Date: Mon, 02 Jun 1997 09:57:35 -0700 From: "Charles H. Peterson, Jr." Reply-To: peterson@cc.berkshire.org Organization: Berkshire Community College X-Mailer: Mozilla 3.0 (Win16; I) MIME-Version: 1.0 To: richardw@ns.telegroup.com CC: Nathan Schuler , bsdi-users@bsdi.com, freebsd-questions@FreeBSD.ORG Subject: Re: telnet References: <2.2.32.19970601041228.006e9abc@sparrow.sanasys.com> <3390D9A0.3522@mail.telegroup.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Richard Windmann wrote: > > In your particular case, the gateway is .10, not .1 - why I don't know - > who set up that net anyway? Check all your configs under /etc - that > is, after you check to see if the net is up at all? Excuse me!! There is certainly nothing magic about a Gateway have a xxx.xxx.xxx.1 address. There is NO .1 rule. Whatever made you say that and 'flame' whoever set it up at the same time???? +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Charles H. Peterson, Jr. {Help Is On The Way.... } Internet Project Coordinator {Oh No... It Is NYNEX...} Berkshire Community College ~~~Opinions Expressed In This E-Mail Are MINE!!!!!~~~ ~~~I Can Live With It............. Can You????????~~~ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ From owner-freebsd-questions Mon Jun 2 06:50:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA19959 for questions-outgoing; Mon, 2 Jun 1997 06:50:26 -0700 (PDT) Received: from python.shoal.net.au (root@python.shoal.net.au [203.26.44.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA19944 for ; Mon, 2 Jun 1997 06:50:14 -0700 (PDT) Received: from chrisj (monty-port46.shoal.net.au [203.26.44.56]) by python.shoal.net.au (8.8.5/8.8.5) with SMTP id XAA03340 for ; Mon, 2 Jun 1997 23:49:58 +1000 (EST) Message-Id: <3.0.1.32.19970602234850.00694e1c@mail.shoal.net.au> X-Sender: chrisj@mail.shoal.net.au X-Mailer: Windows Eudora Light Version 3.0.1 (32) Date: Mon, 02 Jun 1997 23:48:50 +1000 To: questions@FreeBSD.ORG From: Chris Joyce Subject: tcpdump Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I have been trying to log the ping's revived from a remote host using the tcpdump comand, I'm trying to record all movments between the two servers. is there an easer way ? tcpdump -F dump.dat -l > tcplog.dat dump.dat host 203.4.212.90 chris From owner-freebsd-questions Mon Jun 2 07:00:07 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA20348 for questions-outgoing; Mon, 2 Jun 1997 07:00:07 -0700 (PDT) Received: from florence.pavilion.net (mailrelay1.pavilion.net [194.242.128.25]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA20277 for ; Mon, 2 Jun 1997 06:59:50 -0700 (PDT) Received: (from joe@localhost) by florence.pavilion.net (8.8.5/8.8.5) id OAA04697; Mon, 2 Jun 1997 14:59:10 +0100 (BST) Message-ID: <19970602145910.53303@pavilion.net> Date: Mon, 2 Jun 1997 14:59:10 +0100 From: Josef Karthauser To: freebsd-questions@freebsd.org Subject: Reprobing the scsi bus. Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, Does any body know how to reprobe the scsi bus during runtime? I've got a 2.2.2 machine with a disk on sd0, sd1 and sd2. I've just added a drive on sd3, but the kernel doesn't know about it because it wasn't there when the system booted. scsi(8) talks about a /dev/super/scsi device, but I can't find the node numbers for it anywhere. Can anybody offer a quick tutorial please? Joe -- Josef Karthauser Technical Manager Email: joe@pavilion.net Pavilion Internet plc. [Tel: +44 1273 607072 Fax: +44 1273 607073] From owner-freebsd-questions Mon Jun 2 07:03:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA20471 for questions-outgoing; Mon, 2 Jun 1997 07:03:03 -0700 (PDT) Received: from server1.sia.net.au ([203.63.47.240]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA20466 for ; Mon, 2 Jun 1997 07:03:00 -0700 (PDT) Received: from ben ([203.63.47.198]) by server1.sia.net.au (post.office MTA v2.0 0813 ID# 525-33359U1510) with SMTP id AAA335 for ; Tue, 3 Jun 1997 00:08:54 +1000 Message-ID: <3392D1EF.29F9@sia.net.au> Date: Tue, 03 Jun 1997 00:00:15 +1000 From: bricketts@sia.net.au (Ben Ricketts) Reply-To: bricketts@sia.net.au X-Mailer: Mozilla 3.01 (Win95; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Help Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I have tried to copy the boot.flp image to a 1.44 floppy, unfortunateky it seems that the image file is larger than the capacity of my floppy. Is there any way to make the image file smaller? Help much appreciated Ben From owner-freebsd-questions Mon Jun 2 07:29:17 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA21382 for questions-outgoing; Mon, 2 Jun 1997 07:29:17 -0700 (PDT) Received: from aqua.nettrip.net (root@aqua.nettrip.net [207.242.245.3]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA21377 for ; Mon, 2 Jun 1997 07:29:15 -0700 (PDT) Received: from aqua.nettrip.net (luay@aqua.nettrip.net [207.242.245.3]) by aqua.nettrip.net (8.7.4/8.7.3) with SMTP id KAA27176; Mon, 2 Jun 1997 10:32:38 -0400 (EDT) Date: Mon, 2 Jun 1997 10:32:38 -0400 (EDT) From: "Luay O. Masameh" To: Nathan Schuler cc: richardw@ns.telegroup.com, bsdi-users@bsdi.com, freebsd-questions@FreeBSD.ORG Subject: Re: telnet In-Reply-To: <2.2.32.19970601041228.006e9abc@sparrow.sanasys.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, I guess this is gateway problems, you have to make a default route in each host points to the internet gatway. --loui On Sat, 31 May 1997, Nathan Schuler wrote: > When I try to telnet to anywhere outside of our domain I get: > > telnet: Unable to connect to remote host: No route to host > > Any ideas? > > > Nathan Schuler > UNIX Netwoking Solutions / Systems Administrator > Sana Systems Inc. > Clinton, IA 52732 > (319) 242-5770 > > From owner-freebsd-questions Mon Jun 2 07:46:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA22230 for questions-outgoing; Mon, 2 Jun 1997 07:46:39 -0700 (PDT) Received: from radford.i-plus.net (root@Radford.i-Plus.net [206.99.237.6]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA22225 for ; Mon, 2 Jun 1997 07:46:37 -0700 (PDT) Received: from abyss (pitlord@Abyss.i-plus.net [206.99.237.44]) by radford.i-plus.net (8.8.5/8.8.5) with SMTP id KAA23699; Mon, 2 Jun 1997 10:45:14 -0400 (EDT) Message-Id: <199706021445.KAA23699@radford.i-plus.net> X-Mailer: Microsoft Outlook Express 4.71.0544.0 From: "Troy Settle" To: , Subject: Re: Help Date: Mon, 2 Jun 1997 10:46:07 -0400 X-Priority: 3 X-MSMail-Priority: Normal MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-MimeOLE: Produced By Microsoft MimeOLE Engine V4.71.0544.0 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk From: Ben Ricketts >I have tried to copy the boot.flp image to a 1.44 floppy, unfortunateky >it seems that the image file is larger than the capacity of my floppy. >Is there any way to make the image file smaller? > >Help much appreciated Ben, Since you appear to be new to UNIX in general, and FreeBSD in specific, a bit of helpful advice seems to be in order... When you come accross a file called README.TXT, it's usually advisable to read that file before posting a question to a mailing list, newsgroup, irc, or whatever. If you had done this, you would probably be done installing FreeBSD by now, instead of waiting for an answer. As long as you are using FreeBSD or any unix variant, you'll find that this advice will come in handy more times than you'll be able to count. -- Troy Settle Network Administrator, iPlus Internet Services http://www.i-Plus.net >From the file README.TXT in the floppies directory (where you got the boot.flp file) [ The newer/ subdirectory also contains more up-to-date images with fixes ] [ The I18N-flp/ subdirectory contains floppies with national language support (for laptops (bootpao) and standard (boot) computers) ] For a normal CDROM or network installation, all you need to copy onto an actual floppy from this directory is the boot.flp image (for 1.44MB floppies). NOTE: These images are NOT DOS files! You cannot simply copy them to a DOS floppy as regular files, you need to *image* copy them to the floppy with fdimage.exe under DOS or `dd' under UNIX. For example: To create the boot floppy image from DOS, you'd do something like this: C> fdimage boot.flp a: Assuming that you'd copied fdimage.exe and boot.flp into a directory somewhere. If you were doing this from the base of a CD distribution, then the *exact* command would be: E> tools\fdimage floppies\boot.flp a: Assuming that you'd copied fdimage.exe and boot.flp into a directory somewhere. If you were doing this from the base of a CD distribution, then the *exact* command would be: E> tools\fdimage floppies\boot.flp a: If you're creating the boot floppy from a UNIX machine, you may find that: dd if=floppies/boot.flp of=/dev/rfd0 or dd if=floppies/boot.flp of=/dev/floppy work well, depending on your hardware and operating system environment (different versions of UNIX have totally different names for the floppy drive - neat, huh? :-). -- Troy Settle Network Administrator, iPlus Internet Services http://www.i-Plus.net From owner-freebsd-questions Mon Jun 2 07:49:34 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA22346 for questions-outgoing; Mon, 2 Jun 1997 07:49:34 -0700 (PDT) Received: from hda.hda.com (hda-bicnet.bicnet.net [207.198.1.121]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA22341 for ; Mon, 2 Jun 1997 07:49:30 -0700 (PDT) Received: (from dufault@localhost) by hda.hda.com (8.8.5/8.8.5) id KAA06397; Mon, 2 Jun 1997 10:46:03 -0400 (EDT) From: Peter Dufault Message-Id: <199706021446.KAA06397@hda.hda.com> Subject: Re: Reprobing the scsi bus. In-Reply-To: <19970602145910.53303@pavilion.net> from Josef Karthauser at "Jun 2, 97 02:59:10 pm" To: joe@pavilion.net (Josef Karthauser) Date: Mon, 2 Jun 1997 10:45:59 -0400 (EDT) Cc: freebsd-questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL25 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Does any body know how to reprobe the scsi bus during runtime? > I've got a 2.2.2 machine with a disk on sd0, sd1 and sd2. > I've just added a drive on sd3, but the kernel doesn't know > about it because it wasn't there when the system booted. > > scsi(8) talks about a /dev/super/scsi device, but I can't find > the node numbers for it anywhere. Apply the reprobe to any of the existing scsi control devices (e.g., /dev/rsd0.ctl). That super device is/was supposed to be a back door for a bus with nothing present at power up. Whether or not the reprobe works or hangs your system is a function of host adapter and OS release, and so you are better off with a reboot unless you know it works. -- Peter Dufault (dufault@hda.com) Realtime development, Machine control, HD Associates, Inc. Safety critical systems, Agency approval From owner-freebsd-questions Mon Jun 2 07:52:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA22488 for questions-outgoing; Mon, 2 Jun 1997 07:52:11 -0700 (PDT) Received: from rpm.fmrp.usp.br ([143.107.198.165]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA22483 for ; Mon, 2 Jun 1997 07:52:05 -0700 (PDT) Received: from localhost (root@localhost) by rpm.fmrp.usp.br (8.8.5/8.8.5) with SMTP id LAA00796 for ; Mon, 2 Jun 1997 11:51:56 -0300 (EST) Date: Mon, 2 Jun 1997 11:51:56 -0300 (EST) From: "operador(rpm)" To: questions@freebsd.org Subject: segmention fault.. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I am operating with FreeBSD 2.2.2 and I cant get any package via ftp. When I am logging on a freebsd server I get the following message : segmention fault (core dumped) and the section is aborted .. How do I solve this problem ? Is there any section on man pages or on FreeBSD homepage where I can find about freebsd error messages ? Thank you .. .. Ramiro. From owner-freebsd-questions Mon Jun 2 07:52:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA22532 for questions-outgoing; Mon, 2 Jun 1997 07:52:44 -0700 (PDT) Received: from radford.i-plus.net (root@Radford.i-Plus.net [206.99.237.6]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA22527 for ; Mon, 2 Jun 1997 07:52:41 -0700 (PDT) Received: from abyss (pitlord@Abyss.i-plus.net [206.99.237.44]) by radford.i-plus.net (8.8.5/8.8.5) with SMTP id KAA23753; Mon, 2 Jun 1997 10:51:19 -0400 (EDT) Message-Id: <199706021451.KAA23753@radford.i-plus.net> X-Mailer: Microsoft Outlook Express 4.71.0544.0 From: "Troy Settle" To: , Subject: Re: RTL8029 ??? Date: Mon, 2 Jun 1997 10:52:13 -0400 X-Priority: 3 X-MSMail-Priority: Normal MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-MimeOLE: Produced By Microsoft MimeOLE Engine V4.71.0544.0 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk From: deccp7f8@ibmmail.com >Dear Sirs, >just one question about compatible ethernet cards : >I?m running FreeBSD 2.1.5 as a WebServer and now I?m trying >to connect some local clients to the server via a >LanTech PCI-Net/32 CT ethernet card which works with a >Realtek RTL8029 chipset, but FreeBSD can?t handle the card. >Is there a solution, like a new driver, recommended kernel >patch or something like this ... ? >For your answer thanks a lot in advance ... Dirk: If that card is your only choice, you'll need to upgrade to 2.2.x, as the ed0 pci driver has only recently been introduced (at least support for that card) -- Troy Settle Network Administrator, iPlus Internet Services http://www.i-Plus.net From owner-freebsd-questions Mon Jun 2 07:56:12 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA22693 for questions-outgoing; Mon, 2 Jun 1997 07:56:12 -0700 (PDT) Received: from ds9.abac.com (qmailr@ds9.abac.com [206.171.121.64]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id HAA22687 for ; Mon, 2 Jun 1997 07:56:09 -0700 (PDT) Received: (qmail 15064 invoked by uid 501); 2 Jun 1997 14:56:05 -0000 Date: Mon, 2 Jun 1997 07:56:05 -0700 (PDT) From: Bryce Newall To: Christer Englund cc: freebsd-questions@FreeBSD.ORG Subject: Re: Strange message in FreeBSD ver 2.2.2 In-Reply-To: <3392CD2A.22E0@teligent.se> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, Christer Englund wrote: > I have installed FreeBSD 2.2.2 in one of my computers, and > my problem is that the system reports this message: > inetd login_get class:unknown class `root` > What is going on? Is this a problem? It sure is, actually... lots of people get this problem after upgrading to 2.2.2. The solution is to make sure that you have a login.conf file in your /etc directory. If you downloaded the latest sources from the FTP site and did a "make world", or even if you installed a brand new installation, the file *should* be under /usr/src/etc/login.conf. If you don't have it, let me know and I'll send you mine (I haven't changed it from the defaults). ********************************************************************** * Bryce Newall * IRC: Data * Email: data@dal.net * * WWW: http://voyager.abac.com/data * IRC Admin, voyager.dal.net * * --== Try DALnet! Server irc.dal.net, port 7000 ==-- * * "Stop smirking, Number 1." -- J.L. Picard * * "I'm a doctor, not a doorstop!" -- EMH Program, ST:FC * ********************************************************************** From owner-freebsd-questions Mon Jun 2 08:03:07 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA23052 for questions-outgoing; Mon, 2 Jun 1997 08:03:07 -0700 (PDT) Received: from horton.iaces.com (root@horton.iaces.com [204.147.87.98]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA23038 for ; Mon, 2 Jun 1997 08:02:41 -0700 (PDT) Received: (from proot@localhost) by horton.iaces.com (8.8.5/8.8.4) id KAA25444; Mon, 2 Jun 1997 10:02:25 -0500 (CDT) From: "Paul T. Root" Message-Id: <199706021502.KAA25444@horton.iaces.com> Subject: Re: Adobe PDF - how to decode in FreeBSD To: crtb@capecod.net (Chuck) Date: Mon, 2 Jun 1997 10:02:25 -0500 (CDT) Cc: crtb@capecod.net, jkb@best.com, questions@FreeBSD.ORG In-Reply-To: <199706012128.RAA01446@localhost.nih.gov> from Chuck at "Jun 1, 97 05:28:38 pm" X-Organization: !nterprise Networking Services - ACES X-Phone: (612) 663-1979 X-Fax: (612) 663-8030 X-Page: (800) SKY-PAGE PIN: 537-7270 X-Address: 200 S. 5th St., Suite 1100 X-Address: Minneapolis, MN 55402 X-Mailer: ELM [version 2.4ME+ PL22 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk In a previous message, Chuck said: > > Yes, Acrobat reader can be used with Linux binary emulation > > module. > > > -- Yan > > Thanks! Running 2.1.0R, perhaps time to upgrade. I'll look up the > Linux module. It's probably time to upgrade. If you don't want to run linux emulation you can try xpdf. It does a pretty good job. > Chuck Bacon -- crtb@capecod.net > FWIW, BTW, IMHO, AFAIK, YMMV RSN. OTOH, RTFM. FYI. TTYL. > > -- Like the ski resort full of girls hunting for husbands and husbands hunting for girls, the situation is not as symmetrical as it might seem. --Alan Mackay From owner-freebsd-questions Mon Jun 2 08:42:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24655 for questions-outgoing; Mon, 2 Jun 1997 08:42:47 -0700 (PDT) Received: from cotdazr.org (qmailr@gcpacix.vcnet.com [205.228.248.205]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id IAA24639 for ; Mon, 2 Jun 1997 08:42:37 -0700 (PDT) From: efb@cotdazr.org Received: (qmail 6557 invoked by uid 10); 2 Jun 1997 15:44:09 -0000 Message-ID: <19970602154409.6556.qmail@cotdazr.org> Subject: Sendmail 8.8.3 .. FBSD 2.1.6 To: questions@FreeBSD.org Date: Mon, 2 Jun 1997 08:44:09 -0700 (PDT) Cc: efb@cotdazr.org (Everett F Batey), dan@thefactory.com X-Mailer: ELM [version 2.4 PL24] Content-Type: text Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk Sendmail 8.8.3 on Free BSD 2.1.6 .. mail loops and complains from bad DNS/Bind .. MX record .. I just brought up another FreeBSD host as a Sendmail Master. It is on our ISPs IP space .. however.. IN-ADDR PTR is to www.vcd.com .. and .. MX 15 is uunet MX 10 is us.new.host .. The '% hostname' is saturn.vcd.com and .. Djvcd.com # who I masquerade as (null for no masquerading) (see also $=M) DM saturn.vcd.com vcd.com www.vcd.com So .. just like on my Solaris boxes at work .. any email to anyhost.vcd.com Complains of MX problem .. I AM CLUELESS .. 1- Can you point me other than to source code on a configuring email with 2.1.6 guide .. no mention in the newer revs of the Nutshells at Barnes and Noble .. etc .. NO answers from the BSD project .. 2- Would be so nice to have a place to look for docs in the CDROM on the new gotchas in F.BSD Sendmail .. or where ever else I have missed looking .. Please .. Help a really old newbie .. VR /Ev/ Postmaster-less =========================================================================== Forwarded message: [[ as received at my postmaster host with qmail .. ]] > From #@[] Mon Jun 02 13:51:58 1997 Subject: failure notice > The original message was received at Sun, 1 Jun 1997 23:46:44 -0700 (PDT) > from efb@gcpacix [205.228.248.205] > > ----- The following addresses had permanent fatal errors ----- > > > > ----- Transcript of session follows ----- > 553 www.vcd.com. config error: mail loops back to me (MX problem?) > 554 ,... Local configuration error > This was the result of connecting telnet desthost 25 .. helo.. mail.. rcpt.. data.. ... . sequence .. > Message-Id: <199706020646.XAA06480@vcd.com> > to: > to: > Subject: Test traffic onto port 25 to / of vcd.com > > Sent these helo, from and rcpt lines on and to vcd.com > > helo cotdazr.org > 250 vcd.com Hello efb@gcpacix [205.228.248.205], pleased to meet you > mail from: > 250 ... Sender ok > rcpt to: > 250 ... Recipient ok > rcpt to: > 250 ... Recipient ok > rcpt to: > 250 ... Recipient ok > rcpt to: > 250 ... Recipient ok > rcpt to: > 250 ... Recipient ok > rcpt to: > 250 ... Recipient ok > data > 354 Enter mail, end with "." on a line by itself > from: > to: > to: > > --XAA06484.865234302/vcd.com-- =========================================================================== ; <<>> DiG 2.1 <<>> vcd.com any axfr @ns1.west.net ; ; ; Delegated from /etc/named.boot as vcd.com ; @ IN SOA ns1.vcnet.com. efb.ns1.vcnet.com. ( 97053006 ; serial 3600 ; refresh (1 hour) 1800 ; retry (30 mins) 1209600 ; expire (14 days) 21600 ) ; minimum (6 hours) ;; ;; IN NS ns1.vc.net. IN NS ns.cotdazr.org. ; domain vcd.com has this IP .. IN A 205.231.12.17 ; ; Detour at router .. spammers .. via our outer ISP .. ; IN MX 15 mail.uu.net. IN MX 10 vcd.com. ; ; Host saturn.vcd.com has this IP .. saturn IN A 205.231.12.17 IN MX 15 mail.uu.net. IN MX 10 vcd.com. ;; ; Host www.vcd.com has this IP .. www IN A 205.231.12.17 ; old IN A 205.254.228.208 ; ; ; HP email lists transpose vcd.hp.com into hp.vcd.com .. ; hp IN MX 10 vcd.hp.com. ; * IN MX 15 mail.uu.net. * IN MX 10 vcd.com. =========================================================================== % dig -x 205.231.12.17 ;; ANSWERS: 17.12.231.205.in-addr.arpa. 86400 PTR www.vcd.com. =========================================================================== -- + efb@cotdazr.org http://www.vcnet.com/efb efb@oxnardsd.org [EFB15] WA6CRE + + VCEDA: http://www.gitt.gov/ SUG: http://halide.acs.uci.edu/GCSUG UserGrp + + Opinions MINE, NOT Uncles | Edu: http://www.oxnardsd.org/ innd email DNS + + Unix (Sun BSD Linux) - Network Security - Routing (Cisco) - Mail - News + + Beep: 805.655.2017 . 805.982.7180 Vmail: 805.340.6471+5 / 800.545.6998 + From owner-freebsd-questions Mon Jun 2 08:43:40 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24701 for questions-outgoing; Mon, 2 Jun 1997 08:43:40 -0700 (PDT) Received: from eekholt.NL.net (eekholt.NL.net [193.78.241.1]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA24695 for ; Mon, 2 Jun 1997 08:43:37 -0700 (PDT) Received: from smtp01.oce.nl (smtp01.oce.nl [134.188.1.25]) by eekholt.NL.net (8.8.5/8.8.5) with SMTP id RAA09427 for ; Mon, 2 Jun 1997 17:42:54 +0200 (MET DST) Received: by smtp01.oce.nl (5.x/SMI-SVR4) id AA11387; Mon, 2 Jun 1997 17:40:41 +0200 >Return-Path: Received: (qmail 10793 invoked from network); 2 Jun 1997 15:34:35 -0000 Received: from st1-jos.oce.nl (134.188.60.60) by ns-venlo.oce.nl with SMTP; 2 Jun 1997 15:34:35 -0000 Received: (qmail 29860 invoked by uid 911); 2 Jun 1997 15:39:17 -0000 Message-Id: <19970602153917.29859.qmail@st1-jos.oce.nl> To: freebsd-questions@FreeBSD.ORG Subject: How to go from 2.2.1 (WC CD-ROM) to 2.2.2-REL over the Net? Date: Mon, 02 Jun 1997 17:39:17 +0200 From: Jos Backus Content-Type: text Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Greetings all, [This is my first post to this list.] I have read the FAQ (it doesn't seem to cover this topic), and the Handbook presents a copious amount of information :-( I guess all I need is the appropriate supfile entries, run cvsup and then do a 'make world'? Sorry for being so dense :-/ I have only recently added FreeBSD to my list of platforms, following up on a suggestion by a friend. Thanks for any pointers you can provide me with. Groetjes, -- Jos Backus _/ _/_/_/ CIM-ISGA/IS _/ _/ _/ Oce-Technologies B.V. _/ _/_/_/ Venlo, The Netherlands _/ _/ _/ _/ jos@oce.nl _/_/ _/_/_/ #include From owner-freebsd-questions Mon Jun 2 08:44:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24806 for questions-outgoing; Mon, 2 Jun 1997 08:44:44 -0700 (PDT) Received: from sparrow.sanasys.com (root@sparrow.sanasys.com [206.101.242.50]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA24798 for ; Mon, 2 Jun 1997 08:44:41 -0700 (PDT) Received: from nschuler ([206.101.242.81]) by sparrow.sanasys.com (8.8.5/8.8.5) with SMTP id KAA00682; Mon, 2 Jun 1997 10:44:24 -0500 (CDT) Message-Id: <2.2.32.19970602154431.0069eb10@sparrow.sanasys.com> X-Sender: nschuler@sparrow.sanasys.com X-Mailer: Windows Eudora Pro Version 2.2 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 02 Jun 1997 10:44:31 -0500 To: Michael Haro From: Nathan Schuler Subject: Re: Maximum telnet connections Cc: freebsd-questions@FreeBSD.ORG Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >How do I increase the maximum number of telnet connections. I just had 16 >users logged into my computer, and when I tried to connect, telnetd told me >that it couldn't accept any more connects. In your kernel configuration file there is a line that says "maxusers XX". Set this number to the number that you want. Then recompile the kernel. Also, when you "su" this counts as two users. On my BSDI server I have this set to 50. Nathan Schuler UNIX Netwoking Solutions / Systems Administrator Sana Systems Inc. Clinton, IA 52732 (319) 242-5770 From owner-freebsd-questions Mon Jun 2 08:49:19 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA25152 for questions-outgoing; Mon, 2 Jun 1997 08:49:19 -0700 (PDT) Received: from server.netplus.com.br ([200.247.23.97]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA25143 for ; Mon, 2 Jun 1997 08:49:05 -0700 (PDT) Received: from sergio.lenzi (dial09.netplus.com.br [200.247.23.108]) by server.netplus.com.br (8.7.6/8.7.3) with ESMTP id MAA15069; Mon, 2 Jun 1997 12:41:25 GMT Received: (from lenzi@localhost) by sergio.lenzi (8.8.5/8.8.3) id MAA03734; Mon, 2 Jun 1997 12:53:20 GMT Date: Mon, 2 Jun 1997 12:52:56 +0000 () From: "Lenzi, Sergio" X-Sender: lenzi@sergio To: Almondale@aol.com cc: freebsd-questions@FreeBSD.ORG Subject: Re: IP Masquerading In-Reply-To: <970601172501_877375401@emout07.mail.aol.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 1 Jun 1997 Almondale@aol.com wrote: > The latest linux kernel includes support for IP Masquerading, so "private > lans" can share a dialup gateway. What (if any) support does FreeBSD have for > doing this. I have the most recent PPP binaries, but the routed command, when > invoked with -q, returns "no route to hosts" or "can't assign requested > address", and I get the effect described in the PPP manpages, namely the > gateway host can see the internet via my ISP but *is not forwarding* packets > back to my private LAN. I have invoked ppp with the -alias subcommand and > given the static route to my ISDN-modem-equipped Freebsd (2.2.1) machine, but > IP forwarding never seems to occur. I have even tried to remake the kernel > using MROUTED, but it seems to me routed itself *ought* to work? Anybody with > experience getting this setup to work? > > Thanks, > Alex To use ip masquerading in FreeBSD use the ppp with the -alias keyword. ppp -alias -auto xxx ping anything..... make it dial to your provider and assign a default route to it and do the masquerading thing.... the file /etc/ppp/ppp.conf.... default: set device /dev/modem set speed 57600 disable lqr deny lqr set redial 10 0 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\ \T TIMEOUT 40 CONNECT" xxx: set phone 555-6677 set login "TIMEOUT 5 ogin:-\\r-ogin: aaa word: xxx" set timeout 180 set ifaddr 0 1.1.1.1/0 add 0 0 1.1.1.1 Sergio Lenzi. Unix consult. From owner-freebsd-questions Mon Jun 2 08:50:17 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA25222 for questions-outgoing; Mon, 2 Jun 1997 08:50:17 -0700 (PDT) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA25215 for ; Mon, 2 Jun 1997 08:50:11 -0700 (PDT) Received: (from nadav@localhost) by gatekeeper.barcode.co.il (8.8.5/8.6.12) id SAA05153; Mon, 2 Jun 1997 18:49:16 +0300 (IDT) Date: Mon, 2 Jun 1997 18:49:16 +0300 (IDT) From: Nadav Eiron To: Ben Ricketts cc: freebsd-questions@FreeBSD.ORG Subject: Re: Help In-Reply-To: <3392D1EF.29F9@sia.net.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Ben Ricketts wrote: > I have tried to copy the boot.flp image to a 1.44 floppy, unfortunateky > it seems that the image file is larger than the capacity of my floppy. > Is there any way to make the image file smaller? It isn't meant to be copied. Use rawrite (in the tools directory) or dd if using UNIX. See the installation docs for details. > > Help much appreciated > > Ben > Nadav From owner-freebsd-questions Mon Jun 2 08:51:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA25273 for questions-outgoing; Mon, 2 Jun 1997 08:51:14 -0700 (PDT) Received: from algw2.lucent.com (algw2.lucent.com [205.147.213.2]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id IAA25268 for ; Mon, 2 Jun 1997 08:51:12 -0700 (PDT) Received: from ctc.ih.lucent.com by alig2.firewall.lucent.com (SMI-8.6/EMS-L sol2) id LAA02361; Mon, 2 Jun 1997 11:54:05 -0400 Received: by ctc.ih.lucent.com (SMI-8.6/EMS-1.3 sol2) id KAA11279; Mon, 2 Jun 1997 10:50:45 -0500 From: sdlii@lucent.com Received: from ikinamucho.ih.lucent.com by ctc.ih.lucent.com (SMI-8.6/EMS-1.3 sol2) id KAA11276; Mon, 2 Jun 1997 10:50:44 -0500 Received: by ikinamucho.ih.lucent.com (SMI-8.6/EMS-L sol2) id KAA00903; Mon, 2 Jun 1997 10:48:59 -0500 Date: Mon, 2 Jun 1997 10:48:59 -0500 Original-From: sdlii@ctc.ih.lucent.com Message-Id: <199706021548.KAA00903@ikinamucho.ih.lucent.com> To: questions@FreeBSD.org Subject: Floppies? Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-MD5: mpwGcB1BcK5wCnMWmncgEA== Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk To Whom it may concern, I just purchased FreeBSD 2.1.6 from Walnut Creek. Read the install last night. Noticed you can make boot floppies. But, before I wipe out my PC, I would like to install on a laptop I have. 486dx w/200 meg of disk. It only has a floppy at this time(no cdrom or network card). Can I make a floppy distribution from cdrom? I have 100 or so floppies and no life, so I can take all night to install them. I know this is strange, I will eventually get a network card and a decent desktop machine to install on, I just want to start now. Thanks, Scott Lancaster sdlii@lucent.com From owner-freebsd-questions Mon Jun 2 09:20:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA26515 for questions-outgoing; Mon, 2 Jun 1997 09:20:28 -0700 (PDT) Received: from ccsales.ccsales.com ([207.137.172.4]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA26508 for ; Mon, 2 Jun 1997 09:20:26 -0700 (PDT) Received: from ccsales.ccsales.com (ccsales.ccsales.com [207.137.172.4]) by ccsales.ccsales.com (8.8.5/8.6.12) with SMTP id JAA00209; Mon, 2 Jun 1997 09:25:55 -0700 (PDT) Date: Mon, 2 Jun 1997 09:25:55 -0700 (PDT) From: Randy Katz To: Bryce Newall cc: Christer Englund , freebsd-questions@FreeBSD.ORG Subject: Re: Strange message in FreeBSD ver 2.2.2 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I did a new install and it gives this message. Please include your login.conf if you'd be so kind. Thanx, On Mon, 2 Jun 1997, Bryce Newall wrote: > On Mon, 2 Jun 1997, Christer Englund wrote: > > > I have installed FreeBSD 2.2.2 in one of my computers, and > > my problem is that the system reports this message: > > inetd login_get class:unknown class `root` > > What is going on? Is this a problem? > > It sure is, actually... lots of people get this problem after upgrading to > 2.2.2. The solution is to make sure that you have a login.conf file in > your /etc directory. If you downloaded the latest sources from the FTP > site and did a "make world", or even if you installed a brand new > installation, the file *should* be under /usr/src/etc/login.conf. If you > don't have it, let me know and I'll send you mine (I haven't changed it > from the defaults). > > ********************************************************************** > * Bryce Newall * IRC: Data * Email: data@dal.net * > * WWW: http://voyager.abac.com/data * IRC Admin, voyager.dal.net * > * --== Try DALnet! Server irc.dal.net, port 7000 ==-- * > * "Stop smirking, Number 1." -- J.L. Picard * > * "I'm a doctor, not a doorstop!" -- EMH Program, ST:FC * > ********************************************************************** > RAK ------------------------------------------------------------------------------- Randy A. Katz Computer Consultation & Sales 505 S. Beverly Drive, Suite 472 Beverly Hills, CA 90212 (213) 307-9581 http://www.ccsales.com ------------------------------------------------------------------------------- From owner-freebsd-questions Mon Jun 2 09:23:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA26670 for questions-outgoing; Mon, 2 Jun 1997 09:23:30 -0700 (PDT) Received: from sparrow.sanasys.com (root@sparrow.sanasys.com [206.101.242.50]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA26665 for ; Mon, 2 Jun 1997 09:23:26 -0700 (PDT) Received: from nschuler ([206.101.242.81]) by sparrow.sanasys.com (8.8.5/8.8.5) with SMTP id LAA01438; Mon, 2 Jun 1997 11:23:22 -0500 (CDT) Message-Id: <2.2.32.19970602162328.006b97e8@sparrow.sanasys.com> X-Sender: nschuler@sparrow.sanasys.com X-Mailer: Windows Eudora Pro Version 2.2 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 02 Jun 1997 11:23:28 -0500 To: sdlii@lucent.com From: Nathan Schuler Subject: Re: Floppies? Cc: freebsd-questions@FreeBSD.ORG Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >I just purchased FreeBSD 2.1.6 from Walnut Creek. Read the install >last night. Noticed you can make boot floppies. But, before I wipe >out my PC, I would like to install on a laptop I have. 486dx w/200 >meg of disk. It only has a floppy at this time(no cdrom or network card). >Can I make a floppy distribution from cdrom? I have 100 or so floppies >and no life, so I can take all night to install them. I know this is >strange, I will eventually get a network card and a decent desktop >machine to install on, I just want to start now. Yes you can do this. It is detailed in the INSTALL.txt file on the CD. Basically you create a directory on the floppy of the dirtrobution, say /bin. Then copy the install file(s) onto it, say bin.aa. Nathan Schuler UNIX Netwoking Solutions / Systems Administrator Sana Systems Inc. Clinton, IA 52732 (319) 242-5770 From owner-freebsd-questions Mon Jun 2 09:36:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA27369 for questions-outgoing; Mon, 2 Jun 1997 09:36:03 -0700 (PDT) Received: from netcomsv.netcom.com (uucp7.netcom.com [163.179.3.7]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id JAA27338 for ; Mon, 2 Jun 1997 09:35:54 -0700 (PDT) Received: from thor.UUCP by netcomsv.netcom.com with UUCP (8.6.12/SMI-4.1) id JAA29037; Mon, 2 Jun 1997 09:24:31 -0700 Received: from bbao ([192.9.200.157]) by integrix.com (4.1/SMI-4.1) id AA06655; Mon, 2 Jun 97 09:02:54 PDT Message-Id: <9706021602.AA06655@integrix.com> Comments: Authenticated sender is From: "Bill BAO" To: questions@freebsd.org Date: Mon, 2 Jun 1997 09:01:47 +0000 Subject: Fibre Channel Support Priority: normal X-Mailer: Pegasus Mail for Win32 (v2.52) Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi there, Could you please tell me whether the BSD has a fibre channel driver or what kind of fibre channel chip it support now ? Do appreciate your answer. Bill ========================================== Bill BAO Integrix, Inc. 2001 Corporate Center Drive Newbury Park, CA 91320 Tel: 805-3761000 Ext 108 Fax: 805-3761001 Email: bbao@integrix.com URL: http://www.integrix.com ========================================= From owner-freebsd-questions Mon Jun 2 09:38:00 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA27483 for questions-outgoing; Mon, 2 Jun 1997 09:38:00 -0700 (PDT) Received: from sparrow.sanasys.com (root@sparrow.sanasys.com [206.101.242.50]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA27477 for ; Mon, 2 Jun 1997 09:37:57 -0700 (PDT) Received: from nschuler ([206.101.242.81]) by sparrow.sanasys.com (8.8.5/8.8.5) with SMTP id LAA01582; Mon, 2 Jun 1997 11:34:05 -0500 (CDT) Message-Id: <2.2.32.19970602163411.006d816c@sparrow.sanasys.com> X-Sender: nschuler@sparrow.sanasys.com X-Mailer: Windows Eudora Pro Version 2.2 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 02 Jun 1997 11:34:11 -0500 To: efb@cotdazr.org From: Nathan Schuler Subject: Re: Sendmail 8.8.3 .. FBSD 2.1.6 Cc: freebsd-questions@FreeBSD.ORG Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Complains of MX problem .. I AM CLUELESS .. > > 1- Can you point me other than to source code on a configuring email > with 2.1.6 guide .. no mention in the newer revs of the Nutshells > at Barnes and Noble .. etc .. NO answers from the BSD project .. > 2- Would be so nice to have a place to look for docs in the CDROM on > the new gotchas in F.BSD Sendmail .. or where ever else I have missed > looking .. I would reccomend getting the book "DNS and BIND" from O'Reilly and Associates, Inc. (see http://www.ora.com). The BIND table basically goes: IN A IN MX Nathan Schuler UNIX Netwoking Solutions / Systems Administrator Sana Systems Inc. Clinton, IA 52732 (319) 242-5770 From owner-freebsd-questions Mon Jun 2 09:47:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA27921 for questions-outgoing; Mon, 2 Jun 1997 09:47:28 -0700 (PDT) Received: from apollo.netsonic.com (netsonic.com [207.250.84.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA27916 for ; Mon, 2 Jun 1997 09:47:26 -0700 (PDT) Received: from adam.netsonic.com (zeus.netsonic.com [207.250.84.25]) by apollo.netsonic.com (8.8.5/8.8.5) with SMTP id LAA03192 for ; Mon, 2 Jun 1997 11:46:34 -0500 (CDT) Message-Id: <3.0.32.19970602115056.0077502c@mail.netsonic.net> X-Sender: adam@mail.netsonic.net X-Mailer: Windows Eudora Pro Version 3.0 (32) Date: Mon, 02 Jun 1997 11:50:58 -0500 To: freebsd-questions@freebsd.org From: NetSonic Subject: Paging, system monitoring Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Can anyone recommend good software we can install that will monitor the system, performance, hardware etc for problems and will notify via pager when problems arise? Thanks From owner-freebsd-questions Mon Jun 2 10:12:52 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA29546 for questions-outgoing; Mon, 2 Jun 1997 10:12:52 -0700 (PDT) Received: from fps.biblos.unal.edu.co ([168.176.37.11]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id KAA29526; Mon, 2 Jun 1997 10:12:44 -0700 (PDT) Received: from localhost by fps.biblos.unal.edu.co (AIX 4.1/UCB 5.64/4.03) id AA29190; Mon, 2 Jun 1997 12:11:54 -0500 Date: Mon, 2 Jun 1997 12:11:51 -0500 (EST) From: "Pedro F. Giffuni" To: Sergey Vnotchenko Cc: freebsd-questions@freebsd.org, freebsd-emulation@freebsd.org Subject: Re: DOSEMU port In-Reply-To: <199706021300.RAA07723@ns.russianet.ru> Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk AFAIK, DOSEMU relies heavily on VM86 ! VM86 is available as diff files in the experimental dir on the 2.2.1 CD (look under doscmd, it works pretty well!). DOSEMU was also ported for NetBSD, and I think it may be very easy to port for FreeBSD. Look for NetBSD's port into the "Projects" section in NetBSD's WWW if you want to port this. Pedro. On Mon, 2 Jun 1997, Sergey Vnotchenko wrote: > Hi,all! > Does somebody port DOSEMU under FreeBSD 2.2? I've seen no VM86 > in FreeBSD's kernel code, but DOSEMU hardly depends on it:(. > > Thanks in advance, Sergey. > From owner-freebsd-questions Mon Jun 2 10:27:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA00377 for questions-outgoing; Mon, 2 Jun 1997 10:27:41 -0700 (PDT) Received: from sparrow.sanasys.com (root@sparrow.sanasys.com [206.101.242.50]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA00370 for ; Mon, 2 Jun 1997 10:27:37 -0700 (PDT) Received: from nschuler ([206.101.242.81]) by sparrow.sanasys.com (8.8.5/8.8.5) with SMTP id MAA02863; Mon, 2 Jun 1997 12:26:36 -0500 (CDT) Message-Id: <2.2.32.19970602172643.006a62c8@sparrow.sanasys.com> X-Sender: nschuler@sparrow.sanasys.com X-Mailer: Windows Eudora Pro Version 2.2 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 02 Jun 1997 12:26:43 -0500 To: "Bill BAO" From: Nathan Schuler Subject: Re: Fibre Channel Support Cc: freebsd-questions@FreeBSD.ORG Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Could you please tell me whether the BSD has a fibre channel >driver or what kind of fibre channel chip it support now ? Not sure about FreeBSD, but BSDI supports fibre channel. See http://www.bsdi.com for hardware compatbility. Nathan Schuler UNIX Netwoking Solutions / Systems Administrator Sana Systems Inc. Clinton, IA 52732 (319) 242-5770 From owner-freebsd-questions Mon Jun 2 10:34:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA00912 for questions-outgoing; Mon, 2 Jun 1997 10:34:44 -0700 (PDT) Received: from Zeus.MPIS.Net (thomasm@Zeus.MPIS.Net [209.49.116.15]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA00907 for ; Mon, 2 Jun 1997 10:34:40 -0700 (PDT) Received: from localhost (thomasm@localhost) by Zeus.MPIS.Net (8.8.5/8.8.5) with SMTP id NAA17641; Mon, 2 Jun 1997 13:33:05 -0400 (EDT) Date: Mon, 2 Jun 1997 13:33:05 -0400 (EDT) From: Thomas Mullaney To: Richard Windmann cc: Nathan Schuler , bsdi-users@bsdi.com, freebsd-questions@FreeBSD.ORG Subject: Re: telnet In-Reply-To: <3390D9A0.3522@mail.telegroup.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk There is nothing wrong with having ANY IP address for a gateway (except .0 & .255) Make sure you have a default entry in your routing table. Use netstat -r, and look for something like: default Atlas UGS 0 207 ef0 If you dont see and entry use the following 'route add default xxx.xxx.xxx.10' And that should solve the problem. Also just for S&G make sure there is an entry for the loopback interface (127.0.0.1) Also, are you using this machine for outgoing PPP dialup to the Internet? If so, check that ipforwarding is enabled via 'sysctl net.inet.ip.forwarding' It should return 1 for forwarding, 0 for no forwarding, if it is 0 and this box is your gatekey use the 'sysctl net.inet.ip.forwarding=1' to enable it! Question? Call or Write Me! It's better to ask someone ALL the important questions, and understand what they want, instead of flaming them. So of the people that responded should remember this! --Thomas Mullaney --President/CEO - GateKey Solutions, Incorporated ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~ The contents of this message express only the sender's opinion. This message does not necessarily reflect the policy or views of my employer, GateKey Solutions, Incorporated All responsibility for the statements made in this message resides solely and completely with the sender. ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~ On Sun, 1 Jun 1997, Richard Windmann wrote: > Nathan Schuler wrote: > > > > When I try to telnet to anywhere outside of our domain I get: > > > > telnet: Unable to connect to remote host: No route to host > > > > Any ideas? > > > > Nathan Schuler > > UNIX Netwoking Solutions / Systems Administrator > > Sana Systems Inc. > > Clinton, IA 52732 > > (319) 242-5770 > > In your particular case, the gateway is .10, not .1 - why I don't know - > who set up that net anyway? Check all your configs under /etc - that > is, after you check to see if the net is up at all? > From owner-freebsd-questions Mon Jun 2 10:35:45 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA00976 for questions-outgoing; Mon, 2 Jun 1997 10:35:45 -0700 (PDT) Received: from portal.visa.com (portal.visa.com [198.80.42.2]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id KAA00966 for ; Mon, 2 Jun 1997 10:35:23 -0700 (PDT) Received: by portal.visa.com id AA05807 (InterLock SMTP Gateway 3.0 for freebsd-questions@FreeBSD.ORG); Mon, 2 Jun 1997 10:34:27 -0700 Received: by portal.visa.com (Protected-side Proxy Mail Agent-1); Mon, 2 Jun 1997 10:34:27 -0700 Message-Id: From: "Majmundar, Sam" To: "'freebsd-questions@FreeBSD.ORG'" Subject: Can't boot - even fixit did not help !!! Date: Mon, 2 Jun 1997 10:41:44 -0700 X-Mailer: Microsoft Exchange Server Internet Mail Connector Version 4.0.995.52 Encoding: 14 TEXT Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi! I have a duel boot Pentium with FreeBSD on 3G hard disk on SCSI id 1 and NT on another 3G hard disk on SCSI ID 0. I usually changed primary boot device and it worked fine for almost 6 months. Suddenly I can not boot off of the FreeBSD (I guess I have 2.x). I tried to use "fixit.flp" image, but when the floppy is mounted, all that I have is "find" command in /mnt2. There is no df, du or even mount. How can I salvage my hard disk? ANY HELP WOULD BE GREATLY APPRECIATED! - Sam From owner-freebsd-questions Mon Jun 2 10:42:52 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA01259 for questions-outgoing; Mon, 2 Jun 1997 10:42:52 -0700 (PDT) Received: from tao.ai.univ-paris8.fr (tao.ai.univ-paris8.fr [192.33.156.85]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA01253 for ; Mon, 2 Jun 1997 10:42:42 -0700 (PDT) Received: from bach.ai.univ-paris8.fr (bach.ai.univ-paris8.fr [192.33.156.3]) by tao.ai.univ-paris8.fr (8.7.5/8.7.3) with ESMTP id TAA05728 for ; Mon, 2 Jun 1997 19:29:31 +0200 (MET DST) From: Georges Arhodakis Received: (from ga@localhost) by bach.ai.univ-paris8.fr (8.8.2/8.8.2) id TAA08605 for freebsd-questions@freebsd.org; Mon, 2 Jun 1997 19:35:04 +0200 (MDT) Date: Mon, 2 Jun 1997 19:35:04 +0200 (MDT) Message-Id: <199706021735.TAA08605@bach.ai.univ-paris8.fr> Cc: freebsd-hardware@freebsd.org Subject: DIP Switch Information Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi !, I am looking for the DE201 EtherWorks Documentation. Specialy for the DIP Switch of the NIC adapter. The adapter comes from Digital Equipment Corp. Too many thanks. Giorgos ARHODAKIS From owner-freebsd-questions Mon Jun 2 10:58:59 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA02078 for questions-outgoing; Mon, 2 Jun 1997 10:58:59 -0700 (PDT) Received: from horst.bfd.com (horst.bfd.com [204.160.242.10]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA02070 for ; Mon, 2 Jun 1997 10:58:57 -0700 (PDT) Received: from harlie.bfd.com (bastion.bfd.com [204.160.242.14]) by horst.bfd.com (8.8.5/8.7.3) with SMTP id KAA24619; Mon, 2 Jun 1997 10:58:50 -0700 (PDT) Date: Mon, 2 Jun 1997 10:58:50 -0700 (PDT) From: "Eric J. Schwertfeger" To: NetSonic cc: freebsd-questions@FreeBSD.ORG Subject: Re: Paging, system monitoring In-Reply-To: <3.0.32.19970602115056.0077502c@mail.netsonic.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, NetSonic wrote: > Can anyone recommend good software we can install that will monitor the > system, performance, hardware etc for problems and will notify via pager > when problems arise? > > Thanks I found that this wasn't particularly hard to do in shell script, using qpage to deliver notification. It was about a 6 hour job, but I'm not so much worried with performance monitoring as with functionality. Most of the work went into detecting a special case that our ESIX boxes get themselves into, where they will be pingable, and you can rsh to the box, but the command never actually executes and never times out to an error. From owner-freebsd-questions Mon Jun 2 11:01:12 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA02352 for questions-outgoing; Mon, 2 Jun 1997 11:01:12 -0700 (PDT) Received: from mail.net1plus.com (MAIL.CMSCOMMUNICATION.COM [207.77.56.12]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA02326 for ; Mon, 2 Jun 1997 11:00:57 -0700 (PDT) Received: from ws2 ([207.77.56.8]) by mail.net1plus.com (Post.Office MTA v3.0 release 0122 ID# 0-34465U2500L250S0) with SMTP id AAA154 for ; Mon, 2 Jun 1997 13:52:12 -0400 Message-Id: <3.0.32.19970602135834.0093c870@net1plus.com> X-Sender: gcaron@net1plus.com X-Mailer: Windows Eudora Pro Version 3.0 (32) Date: Mon, 02 Jun 1997 13:58:35 -0400 To: freebsd-questions@FreeBSD.ORG From: Support Subject: Re: Strange message in FreeBSD ver 2.2.2 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk My apologies if "Me too's" are against the grain but I would also appreciate a copy of the default login.conf. Is there somewhere on the web where it can be downloaded? TIA At 09:25 AM 6/2/97 -0700, you wrote: >I did a new install and it gives this message. Please include your >login.conf if you'd be so kind. > >Thanx, > >On Mon, 2 Jun 1997, Bryce Newall wrote: > >> On Mon, 2 Jun 1997, Christer Englund wrote: >> >> > I have installed FreeBSD 2.2.2 in one of my computers, and >> > my problem is that the system reports this message: >> > inetd login_get class:unknown class `root` >> > What is going on? Is this a problem? >> >> It sure is, actually... lots of people get this problem after upgrading to >> 2.2.2. The solution is to make sure that you have a login.conf file in >> your /etc directory. If you downloaded the latest sources from the FTP >> site and did a "make world", or even if you installed a brand new >> installation, the file *should* be under /usr/src/etc/login.conf. If you >> don't have it, let me know and I'll send you mine (I haven't changed it >> from the defaults). >> >> ********************************************************************** >> * Bryce Newall * IRC: Data * Email: data@dal.net * >> * WWW: http://voyager.abac.com/data * IRC Admin, voyager.dal.net * >> * --== Try DALnet! Server irc.dal.net, port 7000 ==-- * >> * "Stop smirking, Number 1." -- J.L. Picard * >> * "I'm a doctor, not a doorstop!" -- EMH Program, ST:FC * >> ********************************************************************** >> > > >RAK > >--------------------------------------------------------------------------- ---- >Randy A. Katz >Computer Consultation & Sales >505 S. Beverly Drive, Suite 472 Beverly Hills, CA 90212 >(213) 307-9581 http://www.ccsales.com >--------------------------------------------------------------------------- ---- > > From owner-freebsd-questions Mon Jun 2 11:05:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA02676 for questions-outgoing; Mon, 2 Jun 1997 11:05:06 -0700 (PDT) Received: from blinx.lizard.org (blinx.wms.co.uk [194.159.247.13]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA02657 for ; Mon, 2 Jun 1997 11:05:02 -0700 (PDT) Received: (from flipper@localhost) by blinx.lizard.org (8.8.5/8.7.3) id TAA07530 for questions@freebsd.org; Mon, 2 Jun 1997 19:11:48 +0100 (BST) From: Flipper Spice Message-Id: <199706021811.TAA07530@blinx.lizard.org> Subject: problem with make world 2.2.2 To: questions@freebsd.org Date: Mon, 2 Jun 1997 19:11:48 +0100 (BST) X-Mailer: ELM [version 2.4ME+ PL22 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk has anyone a solution for this cc -O -DLIBC_RCS -DSYSLIBC_RCS -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/home/ncvs/src/lib/libc/locale -DYP -c /home/ncvs/src/lib/libc/gen/sysctl.c -o sysctl.o cc -O -DLIBC_RCS -DSYSLIBC_RCS -D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE -I/home/ncvs/src/lib/libc/locale -DYP -c /home/ncvs/src/lib/libc/gen/syslog.c -o syslog.o /home/ncvs/src/lib/libc/gen/syslog.c: In function `connectlog': /home/ncvs/src/lib/libc/gen/syslog.c:314: `_PATH_OLDLOG' undeclared (first use this function) /home/ncvs/src/lib/libc/gen/syslog.c:314: (Each undeclared identifier is reported only once /home/ncvs/src/lib/libc/gen/syslog.c:314: for each function it appears in.) *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Regards dal From owner-freebsd-questions Mon Jun 2 11:21:57 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA03816 for questions-outgoing; Mon, 2 Jun 1997 11:21:57 -0700 (PDT) Received: from fh-konstanz.de (root@mail.fh-konstanz.de [141.37.218.12]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA03808 for ; Mon, 2 Jun 1997 11:21:51 -0700 (PDT) Received: from rz-ux09 (goetzie@rz-ux09.fh-konstanz.de [141.37.11.11]) by fh-konstanz.de (8.7.5/8.7.3) with SMTP id UAA19249 for ; Mon, 2 Jun 1997 20:20:32 +0200 Message-ID: <33930F34.5321@ThePentagon.com> Date: Mon, 02 Jun 1997 20:21:40 +0200 From: Christoph Goetze Organization: Pentagon (USA) X-Mailer: Mozilla 3.0 (X11; I; HP-UX A.09.05 9000/720) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: CD-ROM Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Dear. I'm looking for the org. CD-ROM with FreeBSD/NetBSD/MacBSD for i386 or greater or Macintosh 68k/PPC Computers (the best ist with all version's). Please send me a tip, whitch is the right one. I tested Linux and I see there are different's version's on the merket place with different "+" or "-". So, I will hope you are able to help me. Best regard's, Christoph. From owner-freebsd-questions Mon Jun 2 12:24:25 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA06647 for questions-outgoing; Mon, 2 Jun 1997 12:24:25 -0700 (PDT) Received: from agora.rdrop.com (root@agora.rdrop.com [199.2.210.241]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA06584 for ; Mon, 2 Jun 1997 12:22:57 -0700 (PDT) Received: from horton.iaces.com (root@horton.iaces.com [204.147.87.98]) by agora.rdrop.com (8.8.5/8.8.5) with ESMTP id MAA27551 for ; Mon, 2 Jun 1997 12:22:51 -0700 (PDT) Received: (from proot@localhost) by horton.iaces.com (8.8.5/8.8.4) id OAA29712; Mon, 2 Jun 1997 14:19:38 -0500 (CDT) From: "Paul T. Root" Message-Id: <199706021919.OAA29712@horton.iaces.com> Subject: Re: Strange message in FreeBSD ver 2.2.2 To: net1plus.com!gcaron@agora.rdrop.com (Support) Date: Mon, 2 Jun 1997 14:19:38 -0500 (CDT) Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <3.0.32.19970602135834.0093c870@net1plus.com> from Support at "Jun 2, 97 01:58:35 pm" X-Organization: !nterprise Networking Services - ACES X-Phone: (612) 663-1979 X-Fax: (612) 663-8030 X-Page: (800) SKY-PAGE PIN: 537-7270 X-Address: 200 S. 5th St., Suite 1100 X-Address: Minneapolis, MN 55402 X-Mailer: ELM [version 2.4ME+ PL22 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk In a previous message, Support said: > My apologies if "Me too's" are against the grain but I would also > appreciate a copy of the default login.conf. Is there somewhere on the web > where it can be downloaded? > > TIA > > At 09:25 AM 6/2/97 -0700, you wrote: > >I did a new install and it gives this message. Please include your > >login.conf if you'd be so kind. /usr/src/etc/login.conf -- If a train-station is where train stops, what happens at a work-station? From owner-freebsd-questions Mon Jun 2 13:03:35 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA08709 for questions-outgoing; Mon, 2 Jun 1997 13:03:35 -0700 (PDT) Received: from synnet.com (bagit.synnet.com [158.101.112.7]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id NAA08702 for ; Mon, 2 Jun 1997 13:03:25 -0700 (PDT) Received: from chute by synnet.com (SMI-8.6/SMI-SVR4) id QAA17417; Mon, 2 Jun 1997 16:10:00 -0400 Received: from localhost by chute with SMTP (1.37.109.16/16.2) id AA059392309; Mon, 2 Jun 1997 16:11:49 -0400 Message-Id: <33932905.59A9@synnet.com> Date: Mon, 02 Jun 1997 16:11:49 -0400 From: Alex Jones Organization: 3Com Switching Systems Division X-Mailer: Mozilla 3.01 (X11; I; HP-UX A.09.07 9000/777) Mime-Version: 1.0 To: questions@freebsd.org Subject: iv-3.1 package corrupted Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Is the iv3.1 package in x11 corrupted? I can't seem to get a clean version of it... -- Alex Jones Tel: 508-264-1367 3Com Switching Systems Division 80 Central Street Boxborough, MA 01719 From owner-freebsd-questions Mon Jun 2 13:06:10 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA08901 for questions-outgoing; Mon, 2 Jun 1997 13:06:10 -0700 (PDT) Received: from dub-img-5.compuserve.com (dub-img-5.compuserve.com [149.174.206.135]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id NAA08896 for ; Mon, 2 Jun 1997 13:06:05 -0700 (PDT) Received: by dub-img-5.compuserve.com (8.6.10/5.950515) id QAA29947; Mon, 2 Jun 1997 16:05:33 -0400 Date: Mon, 2 Jun 1997 16:05:16 -0400 From: GHERBAOUI Subject: Intallation de Freebsd 2.1.5 To: "freebsd-questions@FreeBSD.ORG" Message-ID: <199706021605_MC2-17B3-8D5F@compuserve.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id NAA08897 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk J'ai installé Freebsd 2.1.5 (Unix) dans ma machine, mais au démarrage la machine me demande le login et le mot de passe. Je n'ai pas trouvé dans la documentation du CD-ROM, le login et le mot de passe qu'il faut entrer. Merci de m'aider car je suis en période d'examen, j'ai acheté le CD-ROM et je suis coincé à cause du login et mot de passe Merci omar.gherbaoui From owner-freebsd-questions Mon Jun 2 13:07:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA08965 for questions-outgoing; Mon, 2 Jun 1997 13:07:05 -0700 (PDT) Received: from ns.image.dk (root@www29.image.dk [194.234.57.29]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id NAA08960 for ; Mon, 2 Jun 1997 13:07:00 -0700 (PDT) Received: from thor (pm5-30.image.dk [194.234.173.30]) by ns.image.dk (8.8.4/8.7.3) with SMTP id VAA25200 for ; Mon, 2 Jun 1997 21:41:02 +0200 Message-ID: <3393272C.47DF@image.dk> Date: Mon, 02 Jun 1997 22:03:56 +0200 From: Per Eegehauge Reply-To: phce@image.dk X-Mailer: Mozilla 3.0Gold (Win95; I) MIME-Version: 1.0 To: questions@FreeBSD.ORG Subject: Cant install via PPP Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi I am trying to install BSD 2.2.1 via ppp but the installation stops when i gets to the point where the two virtual terminals are running (one with ppp). I have tried with allmost all of the sites but ends up with the same result: 'Cannot resolve nnnn'. PPP runs ok on my old 2.1.5 machine and I have tried with the same login parameters I use there. Does anyone have a clue what to do? Thanks Per Eegehauge phce@image.dk From owner-freebsd-questions Mon Jun 2 13:33:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA10656 for questions-outgoing; Mon, 2 Jun 1997 13:33:26 -0700 (PDT) Received: from sparrow.sanasys.com (root@sparrow.sanasys.com [206.101.242.50]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id NAA10642 for ; Mon, 2 Jun 1997 13:33:21 -0700 (PDT) Received: from nschuler ([206.101.242.85]) by sparrow.sanasys.com (8.8.5/8.8.5) with SMTP id PAA06365; Mon, 2 Jun 1997 15:31:56 -0500 (CDT) Message-Id: <2.2.32.19970602203206.006a3324@sparrow.sanasys.com> X-Sender: nschuler@sparrow.sanasys.com X-Mailer: Windows Eudora Pro Version 2.2 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 02 Jun 1997 15:32:06 -0500 To: Christoph Goetze From: Nathan Schuler Subject: Re: CD-ROM Cc: freebsd-questions@FreeBSD.ORG, bsdi-users@BSDI.COM Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >I'm looking for the org. CD-ROM with FreeBSD/NetBSD/MacBSD >for i386 or greater or Macintosh 68k/PPC Computers (the >best ist with all version's). Do not have much experience with anything other FreeBSD and BSDI. I have heard good things about NetBSD and I think that it runs on a PowerPC. If you are looking for a commercial grade BSD UNIX for the PowerPC/PowerMac use BSDI. See http://www.bsdi.com for more BSDI info. >Please send me a tip, whitch is the right one. I tested >Linux and I see there are different's version's on the >merket place with different "+" or "-". First hint, avoid Linux. Linux is OK, but for serious use it is just not acceptable at all. Nathan Schuler UNIX Netwoking Solutions / Systems Administrator Sana Systems Inc. Clinton, IA 52732 (319) 242-5770 From owner-freebsd-questions Mon Jun 2 13:52:09 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA11700 for questions-outgoing; Mon, 2 Jun 1997 13:52:09 -0700 (PDT) Received: from tornado.cisco.com (tornado.cisco.com [171.69.104.22]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id NAA11678; Mon, 2 Jun 1997 13:52:03 -0700 (PDT) Received: from bmcgover-pc.cisco.com (bmcgover-pc.cisco.com [171.69.104.147]) by tornado.cisco.com (8.8.5-Cisco.1/8.6.5) with ESMTP id QAA25062; Mon, 2 Jun 1997 16:45:44 -0400 (EDT) Received: from bmcgover-pc.cisco.com (localhost.cisco.com [127.0.0.1]) by bmcgover-pc.cisco.com (8.8.5/8.8.5) with ESMTP id QAA00272; Mon, 2 Jun 1997 16:51:26 -0400 (EDT) Message-Id: <199706022051.QAA00272@bmcgover-pc.cisco.com> To: hackers@freebsd.org cc: questions@freebsd.org Reply-To: mcgovern@spoon.beta.com Subject: Need help with O_NONBLOCK and pppd in FreeBSD.... Date: Mon, 02 Jun 1997 16:51:26 -0400 From: Brian McGovern Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I've been doing some code-searching as to why, whenever I try to run pppd with my serial driver, that pppd suddenly starts spinning out of control. I think I see where this is happening (in pppd), but I'm not sure if I'm confusing what I think is happening, and what really is happening. If someone can comment on these code chunks, I'd greatly appreciate it: >From /usr/src/usr.sbin/pppd/main.c, line 317: nonblock = (connector || !modem)? O_NONBLOCK: 0; Now, in my test cases, connector will be 0/NULL (I am not dialing out), and modem is 1 (I want to use modem control lines). Therefore, nonblock = (0 || !1)? O_NONBLOCK:0; nonblock = (0 || 0) ? O_NONBLOCK:0; nonblock = 0; Then, on line 326: if (nonblock) { initfdflags &= ~O_NONBLOCK; fcntl(fd, F_SETFL, initfdflags); } Which translates in to: if (0) { initfdflags &= ~O_NONBLOCK; fcntl(fd, F_SETFL, initfdflags); } which will never get executed. This should turn OFF NON_BLOCKING operation, which I'm assuming is what pppd really wants. Of course, due to the value of nonblock, this code will never happen, so O_NONBLOCK is still in the default case, which appears to be OFF (unset). However, then we look at line 396, which reads: if (fcntl(fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) { syslog(LOG_ERR, "Couldn't set device to non-blocking mode: %m"); die(1); } Which seems to tell me to set O_NONBLOCK, reguardless of whether we want to use modem control lines or not. Once in a non-blocking state, pppd is free to spin completely out of control. This is the last invokation I've found that effects the O_NONBLOCK attribute. Now, in my opinion, this seems backwards. Wouldn't I potentially want to turn O_NONBLOCK _ON_ first, in order to dial out, then turn it _OFF_ unconditionally? Perhaps I'm missing something, but it seems strange. Please, set me straight.... -Brian From owner-freebsd-questions Mon Jun 2 14:19:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA13072 for questions-outgoing; Mon, 2 Jun 1997 14:19:47 -0700 (PDT) Received: from tornado.cisco.com (tornado.cisco.com [171.69.104.22]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA13052; Mon, 2 Jun 1997 14:19:43 -0700 (PDT) Received: from bmcgover-pc.cisco.com (bmcgover-pc.cisco.com [171.69.104.147]) by tornado.cisco.com (8.8.5-Cisco.1/8.6.5) with ESMTP id RAA27720; Mon, 2 Jun 1997 17:13:27 -0400 (EDT) Received: from bmcgover-pc.cisco.com (localhost.cisco.com [127.0.0.1]) by bmcgover-pc.cisco.com (8.8.5/8.8.5) with ESMTP id RAA00332; Mon, 2 Jun 1997 17:19:11 -0400 (EDT) Message-Id: <199706022119.RAA00332@bmcgover-pc.cisco.com> To: hackers@freebsd.org, questions@freebsd.org Subject: re: Need help with pppd... Date: Mon, 02 Jun 1997 17:19:11 -0400 From: Brian McGovern Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Ok. I shot the mouth off too soon. Restructuring all of the parenthesis so they lined up cleared up a couple of issues. People who use that type of indentation and bracket-matching obviously don't do hand traces all that often :\ (Thats a joke, so please, no flames). Anyhow, I've reduced myself to one question. Or, more acurately, one point that I need clarification on. I see now that PPPD leaves the port in a non-blocked state for the duration of the call. I guess I don't see why... After all, it could be left blocking, and I/O could be first checked for with a select call. I guess the question I really have is this... With the other serial drivers, what keeps pppd from spinning completely out of control (if its not selecting/ blocking on the async port)? -Brian From owner-freebsd-questions Mon Jun 2 14:43:09 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA14190 for questions-outgoing; Mon, 2 Jun 1997 14:43:09 -0700 (PDT) Received: from sax.sax.de (sax.sax.de [193.175.26.33]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id OAA14165 for ; Mon, 2 Jun 1997 14:42:52 -0700 (PDT) Received: (from uucp@localhost) by sax.sax.de (8.6.12/8.6.12-s1) with UUCP id XAA03760; Mon, 2 Jun 1997 23:42:49 +0200 Received: (from j@localhost) by uriah.heep.sax.de (8.8.5/8.8.5) id WAA12408; Mon, 2 Jun 1997 22:10:38 +0200 (MET DST) Message-ID: <19970602221032.NH28135@uriah.heep.sax.de> Date: Mon, 2 Jun 1997 22:10:32 +0200 From: j@uriah.heep.sax.de (J Wunsch) To: questions@freebsd.org Cc: jwb@fore.com Subject: Re: ppp and static IP References: <199706021423.KAA01533@jwb.fore.com> <6339.865267497@time.cdrom.com> X-Mailer: Mutt 0.60_p2-3,5,8-9 Mime-Version: 1.0 X-Phone: +49-351-2012 669 X-PGP-Fingerprint: DC 47 E6 E4 FF A6 E9 8F 93 21 E0 7D F9 12 D6 4E Reply-To: joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) In-Reply-To: <6339.865267497@time.cdrom.com>; from Jordan K. Hubbard on Jun 2, 1997 09:04:57 -0700 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk As Jordan K. Hubbard wrote: > In any case, you tell us absolutely nothing about how ppp actually > fails, so how are we supposed to help you? :-( Also, if dynamic IP works, i don't seen any problem why _not_ to use them. That's the good thing with PPP: you can leave the IP address open for negotiation, and it's just a matter of the other end which address to provide. This is probably best placed in -questions. -- cheers, J"org joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-) From owner-freebsd-questions Mon Jun 2 15:05:45 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA15657 for questions-outgoing; Mon, 2 Jun 1997 15:05:45 -0700 (PDT) Received: from phaeton.artisoft.com (phaeton.Artisoft.COM [198.17.250.50]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id PAA15649; Mon, 2 Jun 1997 15:05:41 -0700 (PDT) Received: (from terry@localhost) by phaeton.artisoft.com (8.6.11/8.6.9) id PAA15463; Mon, 2 Jun 1997 15:02:22 -0700 From: Terry Lambert Message-Id: <199706022202.PAA15463@phaeton.artisoft.com> Subject: Re: Need help with O_NONBLOCK and pppd in FreeBSD.... To: mcgovern@spoon.beta.com Date: Mon, 2 Jun 1997 15:02:22 -0700 (MST) Cc: hackers@FreeBSD.ORG, questions@FreeBSD.ORG In-Reply-To: <199706022051.QAA00272@bmcgover-pc.cisco.com> from "Brian McGovern" at Jun 2, 97 04:51:26 pm X-Mailer: ELM [version 2.4 PL24] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Which seems to tell me to set O_NONBLOCK, reguardless of whether we want to > use modem control lines or not. Once in a non-blocking state, pppd is free > to spin completely out of control. This is the last invokation I've found that > effects the O_NONBLOCK attribute. > > Now, in my opinion, this seems backwards. Wouldn't I potentially want to turn > O_NONBLOCK _ON_ first, in order to dial out, then turn it _OFF_ > unconditionally? Perhaps I'm missing something, but it seems strange. Please, > set me straight.... O_NDELAY, the open flag, has two meanings: 1) Do not wait for DCD before completing the open on a modem control device. 2) Refuse all calls which would block with EWOULDBLOCK. It used to be you could not turn non-blocking I/O off once it was on. There are other issues of DCD when dialing out. Basically, we are being POSIX'ed to death, and we are implementing in other than the way SVR4 does because we are gratuitously incompatible and we want to make things hard for the people doing the ABI code. The corrrect sequence is: a) set 1 second alarm b) do blocking open i) if open succeeds instead of alarming out, close the fd. Not a warning on the console that the port is either non-modem control, or the modem cable is bad (DCD jumpered high) or the modem is incorrectly configured (DCD does not follow remote carrier). NB: This procesure unsets O_EXCL in the tty struct as set by uugetty and other software abominations before God. c) do non-blocking open. This will succeed because non-blocking open always succeeds. Because of step (b), you are assured that you will not get an EWOULDBLOCK/EPERM from an exclusivity conflict. d) do blocking open on second fd. This will succeed because there is an existing open, so the DCD status is not checked. e) close the fd obtained in (c); it is useless. f) Proceed with operation using fd obtained in (d). On DCD loss, you must close this fs and go to step (a). This procedure will work correctly on all UNIX systems. Terry Lambert terry@lambert.org --- Any opinions in this posting are my own and not those of my present or previous employers. From owner-freebsd-questions Mon Jun 2 15:19:35 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA16419 for questions-outgoing; Mon, 2 Jun 1997 15:19:35 -0700 (PDT) Received: from luke.cpl.net (luke.cpl.net [206.85.245.131]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA16414 for ; Mon, 2 Jun 1997 15:19:32 -0700 (PDT) Received: from localhost (shawn@localhost) by luke.cpl.net (8.8.5/8.8.5) with SMTP id PAA00513 for ; Mon, 2 Jun 1997 15:19:23 -0700 (PDT) Date: Mon, 2 Jun 1997 15:19:23 -0700 (PDT) From: Shawn Ramsey To: questions@freebsd.org Subject: mirroring web sites Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Is it possible to assign the same address 2 IP address, and if one IP(first one) doesnt respond, have it go to the second? From owner-freebsd-questions Mon Jun 2 16:07:19 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA18935 for questions-outgoing; Mon, 2 Jun 1997 16:07:19 -0700 (PDT) Received: from spitfire.ecsel.psu.edu (qmailr@spitfire.ecsel.psu.edu [146.186.218.51]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id QAA18928 for ; Mon, 2 Jun 1997 16:07:15 -0700 (PDT) From: tenser@spitfire.ecsel.psu.edu Received: (qmail 18918 invoked by uid 1000); 2 Jun 1997 23:07:11 -0000 Date: 2 Jun 1997 23:07:11 -0000 Message-ID: <19970602230711.18917.qmail@spitfire.ecsel.psu.edu> To: questions@freebsd.org Subject: Solaris x86 FS's and FreeBSD? Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Okay, here's a question. I have need to install Solaris x86 on my PC at work. I'd also like to run FreeBSD, though. Is it possible to mount filesystems created under Solaris x86 under FreeBSD, or vice versa? I'd like to share my home directory, if at all possible, and I'm willing to put it on it's own partition, if necessary. Is UFS that different that this is NOT possible? I checked the mailing list archives and web pages for an answer to this question, and didn't see one. Thanks! - Dan C. From owner-freebsd-questions Mon Jun 2 16:23:59 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA19696 for questions-outgoing; Mon, 2 Jun 1997 16:23:59 -0700 (PDT) Received: from isf.kiev.ua (sunone.isf.kiev.ua [194.44.162.131]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA19672 for ; Mon, 2 Jun 1997 16:22:46 -0700 (PDT) Received: from olinet.isf.kiev.ua by isf.kiev.ua with ESMTP id CAA29365; (8.8.3/2.b1) Tue, 3 Jun 1997 02:16:16 +0300 (EET DST) Received: from myname.my.domain by olinet.isf.kiev.ua with SMTP id BAA06460; (8.8.3/vak/1.9) Tue, 3 Jun 1997 01:58:41 +0300 (EET DST) Message-ID: <33935065.167EB0E7@olinet.isf.kiev.ua> Date: Mon, 02 Jun 1997 22:59:49 +0000 From: Vladimir Kushnir X-Mailer: Mozilla 3.01 (X11; I; FreeBSD 2.2-RELEASE i386) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Help with Yamaha Sound Origins 32 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi all. Well subject sais it all. Sorry if a qiestion is stupid but would anybody please help me with the correct settings (for kernel and all) for this sound card? The problem is : kernel sees everything (sb, opl, mss, mpu and whatnot; it doesn't see sbxvi0 and sbmidi0 though) at any IRQ and DRQ but only midi interface works. Thanks in advance. Vladimir From owner-freebsd-questions Mon Jun 2 16:29:55 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA19879 for questions-outgoing; Mon, 2 Jun 1997 16:29:55 -0700 (PDT) Received: from train.tgci.com ([205.185.169.3]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id QAA19872 for ; Mon, 2 Jun 1997 16:29:52 -0700 (PDT) Received: from emilyd ([206.250.85.68]) by train.tgci.com (8.6.12/8.6.9) with SMTP id RAA05859; Mon, 2 Jun 1997 17:02:33 -0700 Message-Id: <199706030002.RAA05859@train.tgci.com> Comments: Authenticated sender is From: "Riley J. McIntire" To: Robert Clark Date: Mon, 2 Jun 1997 16:28:06 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: Can one dual boot fbsd? No? (was Re: wd0/sd0 can't bo Reply-to: chaos@tgci.com CC: questions@FreeBSD.ORG Priority: normal X-mailer: Pegasus Mail for Win32 (v2.42a) Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Date: Mon, 02 Jun 1997 15:20:22 -0700 > From: Robert Clark > To: bab@icon.lal.ufl.edu, chaos@mail.tgci.com, chaos@tgci.com > Subject: Re: Can one dual boot fbsd? No? (was Re: wd0/sd0 can't bo > -Reply > I've seen the same type of quandry myself. Turning an IDE disk off in CMOS doesn't protect it from FreeBSD. Doing a -c > and disabling the IDE/ST-506 device does. Just fyi, on the newer computers with an onboard PCI IDE controller you can disable the IDE buses, primary and secondary, and fbsd (or anyother os) won't see it. This isn't the same as telling the bios the drive isn't installed, and the option is someplace else, too. Usually in Peripherals, or PCI etc. Anyway, it can be handy in debugging or installs so as not to mixup the os. Riley From owner-freebsd-questions Mon Jun 2 17:12:33 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA21877 for questions-outgoing; Mon, 2 Jun 1997 17:12:33 -0700 (PDT) Received: from techus.holontech.com (success.holontech.com [206.204.78.100]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA21866 for ; Mon, 2 Jun 1997 17:12:27 -0700 (PDT) Received: (from smtp@localhost) by techus.holontech.com (8.8.5/8.7.3) id RAA16248 for ; Mon, 2 Jun 1997 17:10:20 -0700 (PDT) Received: from post.holontech.com (pop.holontech.com [10.2.2.2]) by techus.holontech.com id rfRAA16186 for <>; Mon Jun 2 17:07:10 1997 X-Spoof-Warning: post.holontech.com [10.2.2.2] does not match with pop.holontech.com [10.2.2.2] Received: by post.holontech.com (4.1/SMI-4.1) id AA07323; Mon, 2 Jun 97 17:08:11 PDT Date: Mon, 2 Jun 97 17:08:11 PDT From: pnoack@holontech.com (Pat Noack) Message-Id: <9706030008.AA07323@post.holontech.com> To: questions@freebsd.org Subject: adding a new disk Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I've got a freebsd system that currently has one 1 GB scsi disk on it. This first disk is disk0. I've installed a second 3GB scsi disk as disk1. I've used sysinstall to setup the new disk by partitioning it and then trying to label it. I've tried this in about 12 different ways. Large partitions, small partitions, disks compatible with other operating systems, disk just for freebsd and all of them dump core when I try to write the label. Are there any memory restrictions/limitations/recomenadations of how much memory I should have with this configuration. Any thoughts or help on this setup would be appreciated. Pat From owner-freebsd-questions Mon Jun 2 17:30:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA22570 for questions-outgoing; Mon, 2 Jun 1997 17:30:06 -0700 (PDT) Received: from mcfeely.interaccess.com (mcfeely.interaccess.com [207.70.126.131]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA22562 for ; Mon, 2 Jun 1997 17:30:03 -0700 (PDT) Received: from 204.148.86.140 (d140.nnb.interaccess.com [204.148.86.140]) by mcfeely.interaccess.com (8.8.5/8.7.5) with SMTP id TAA17557 for ; Mon, 2 Jun 1997 19:29:37 -0500 (CDT) Message-ID: <3391CDE5.38D8@nt.nttc.org> Date: Sun, 01 Jun 1997 19:30:50 +0000 From: AR Reply-To: aroin@nt.nttc.org X-Mailer: Mozilla 3.01 (Macintosh; I; PPC) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: latest version Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I visted your web site, and it sometimes looks as if the latest version is 3.0, but other time looks as if it is 2.2. I visited your ftp site and it has something called 3.0SNAP which looked more like a prerelease than a full version. It also had version 2.2, but also had something called current. Is current 3.0? I talked to Walnut Creek and the latest version they have is 2.2. Thanks for your help. From owner-freebsd-questions Mon Jun 2 17:42:32 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA23442 for questions-outgoing; Mon, 2 Jun 1997 17:42:32 -0700 (PDT) Received: from andrsn.stanford.edu (root@andrsn.Stanford.EDU [36.33.0.163]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA23437 for ; Mon, 2 Jun 1997 17:42:29 -0700 (PDT) Received: from localhost (andrsn@localhost.Stanford.EDU [127.0.0.1]) by andrsn.stanford.edu (8.8.5/8.6.12) with SMTP id RAA14056; Mon, 2 Jun 1997 17:42:22 -0700 (PDT) Date: Mon, 2 Jun 1997 17:42:21 -0700 (PDT) From: Annelise Anderson Reply-To: Annelise Anderson To: GHERBAOUI cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: Intallation de Freebsd 2.1.5 In-Reply-To: <199706021605_MC2-17B3-8D5F@compuserve.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from QUOTED-PRINTABLE to 8bit by hub.freebsd.org id RAA23438 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, GHERBAOUI wrote: > J'ai installé Freebsd 2.1.5 (Unix) dans ma machine, mais au démarrage la > machine me demande le login et le mot de passe. > Je n'ai pas trouvé dans la documentation du CD-ROM, le login et le mot de > passe qu'il faut entrer. le login est root il n'y … pas un mot de pass? entrez il faut donner root un mot de passe avec "passwd" il faut creer un "user" ordinaire avec "adduser" Documentation est … http://www.freebsd.org/tutorials/newuser/newuser.html, mais c'est en anglais. Annelise > Merci de m'aider car je suis en période d'examen, j'ai acheté le CD-ROM et > je suis coincé à cause du login et mot de passe > Merci > omar.gherbaoui > From owner-freebsd-questions Mon Jun 2 17:46:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA23710 for questions-outgoing; Mon, 2 Jun 1997 17:46:26 -0700 (PDT) Received: from TRUTH.WOFFORD.EDU (truth.wofford.edu [199.190.174.30]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id RAA23695 for ; Mon, 2 Jun 1997 17:46:16 -0700 (PDT) Date: Mon, 2 Jun 1997 20:45:24 -0400 From: Dan Welch To: Malvin.Chang@auth2.webquest.com CC: QUESTIONS@FREEBSD.ORG, WELCHDW@wofford.edu Message-Id: <970602204524.22a2d6f2@wofford.edu> Subject: RE: mail coming in, not going out Sender: owner-questions@FREEBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Date: Sun, 1 Jun 1997 13:53:31 GMT+8 From: "Malvin Chang" To: WELCHDW@wofford.edu Subject: mail coming in, not going out >Hi Dan, sorry for butting in like this. I've been searching the >FreeBSD list and found that you have a problem which is similar to >what I'm experiencing right now. I would like to ask if you can help >me out assuming that you have already solve your problem. > >Thanks I found the solution in the 2nd edition of the Sendmail book: create the file /etc/service.switch and place in it the single line hosts /etc/hosts The book gives details. Good luck. For those who forgot what the problem was, here's the original: >Hi Dan, sorry for butting in like this. I've been searching the >FreeBSD list and found that you have a problem which is similar to >what I'm experiencing right now. I would like to ask if you can help >me out assuming that you have already solve your problem. > >Thanks I found the solution in the new edition of the Sendmail book: create the file /etc/service.switch and place in it the single line hosts /etc/hosts This solved my sendmail problem with both 2.1.5 and 2.1.6 neatly. The book explains why this works. Good Luck. ...DanW -------------------- For those who wonder what the problem was, here's the original. (It's a non-issue for people running DNS, I think.) >>Machines on which I install FBSD 2.1.5 and 2.1.6 from the >>distribution cdrom's are unable to send mail to other machines on >>the local network. > >>The failure mode is that the outgoing messages are queued with this >>error message in them: > >>MDeferred: Name server: gp.dept.net.: host name lookup failure > >>The network is isolated, contains FreeBSD machines only, does not >>run DNS, and has all addresses in /etc/hosts on every machine. >>Incoming mail works fine, as do rlogin, telnet, and ftp. My sendmail >>m4 configuration file specifies FEATURE(nodns) and the order in >>/etc/host.conf is hosts then bind. > >>I use versions of FreeBSD earlier than 2.1.5 (each using its >>accompanying sendmail version) without difficulty; mail works well >>in both directions. > >>Help? I don't understand this new problem at all. From owner-freebsd-questions Mon Jun 2 18:11:46 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA25097 for questions-outgoing; Mon, 2 Jun 1997 18:11:46 -0700 (PDT) Received: from agora.rdrop.com (root@agora.rdrop.com [199.2.210.241]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA25092 for ; Mon, 2 Jun 1997 18:11:40 -0700 (PDT) Received: from daisy.snet.net (mail.snet.net [204.60.7.83]) by agora.rdrop.com (8.8.5/8.8.5) with ESMTP id SAA00673 for ; Mon, 2 Jun 1997 18:11:35 -0700 (PDT) Received: from katya.snet.net (hrfr03-sh9-port21.snet.net [204.60.10.21]) by daisy.snet.net (8.8.5/8.8.5/SNET-1.5) with SMTP id VAA14643 for ; Mon, 2 Jun 1997 21:10:18 -0400 (EDT) Message-ID: <33936E46.167EB0E7@snet.net> Date: Mon, 02 Jun 1997 21:07:18 -0400 From: "Jeffrey M. Metcalf" X-Mailer: Mozilla 3.01Gold (X11; I; FreeBSD 2.2.1-RELEASE i386) MIME-Version: 1.0 To: FreeBSD Questions Subject: Q: Problems with nca0 device Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hello All, I am having problems with my Iomega Zip 100 drive connected to my ProAudioStudio SCSI host adapter (device nca0). I get the following message on my console nca0/5/0 data length underflow whenever I attempt to write data to the zip drive. Reading seems OK resulting in the message nca: pseudo-dma timeout I suspect that the second message is more benign that the first. Data that I have written to the drive seem to get truncated or corrupted. This doesn't always occur. I have successfully written some large files to the zip drive, have read them back, and have found them totally uncorrupted. Others have been corrupted. This occurs both with DOS fs and ufs on the ZIP media. Does anyone have any ideas what could be wrong and if there is anything I can do about it? Incidently, the drive seems to work fine under Windows95 with the same host adapter, hence I think it's a FreeBSD driver problem with nca0 rather than a hardware problem. Thank You, JM -- Jeffrey M. Metcalf metcalf@snet.net From owner-freebsd-questions Mon Jun 2 18:42:10 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA26337 for questions-outgoing; Mon, 2 Jun 1997 18:42:10 -0700 (PDT) Received: from onyx.interactive.net (root@onyx.interactive.net [208.192.224.6]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA26332 for ; Mon, 2 Jun 1997 18:42:07 -0700 (PDT) Received: from luddite.org (host019.madison.interactive.net [208.192.224.119]) by onyx.interactive.net (8.8.5/8.8.5) with ESMTP id VAA20057 for ; Mon, 2 Jun 1997 21:42:03 -0400 (EDT) Received: (from sachs@localhost) by luddite.org (8.8.5/8.8.5) id VAA00288; Mon, 2 Jun 1997 21:44:38 -0400 (EDT) To: questions@FreeBSD.org Subject: Re: 2.2.2, start_if.tun0 and sendmail References: Mime-Version: 1.0 (generated by tm-edit 7.101) Content-Type: text/plain; charset=US-ASCII From: Jay Sachs Date: 02 Jun 1997 21:44:37 -0400 In-Reply-To: Dan Busarow's message of "Sun, 1 Jun 1997 16:22:17 -0700 (PDT)" Message-ID: <8767vwmpdm.fsf@luddite.org> Lines: 19 X-Mailer: Gnus v5.4.56/XEmacs 19.15 X-Face: 6!-I&o^[[HP+0~O~}d2Zf@Pbof:|>j5^*W$QOR"&)JYcHT.@-"AhAXLg3vioV79Ri3JMp/a e3QD@Z$1Ot@'j1/A Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk Dan Busarow writes: > On 1 Jun 1997, Jay Sachs wrote: > > For whatever reason, sendmail won't daemonize until the ppp connection > > is established. The problem with this is that the boot-up process > > sendmail tries to resolve all of your interfaces at startup (in daemon > mode) in order to build an initial Cw > > You can try to add your host in /etc/hosts if it's not there already. > Another, ugly, option would be to remove the initial resolving which > is done in daemon.c (IIRC). Make sure you build your own Cw if you > do this. Putting the host in /etc/hosts didn't change things. And instead of modifying the sendmail sources, I'd much prefer to edit /etc/rc and start up sendmail in the background (which is what I did). -Jay From owner-freebsd-questions Mon Jun 2 18:58:35 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA27029 for questions-outgoing; Mon, 2 Jun 1997 18:58:35 -0700 (PDT) Received: from Kitten.mcs.com (Kitten.mcs.com [192.160.127.90]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA27024 for ; Mon, 2 Jun 1997 18:58:33 -0700 (PDT) Received: from Venus.mcs.net (font@Venus.mcs.net [192.160.127.92]) by Kitten.mcs.com (8.8.5/8.8.2) with ESMTP id UAA00859; Mon, 2 Jun 1997 20:58:32 -0500 (CDT) Received: from localhost (font@localhost) by Venus.mcs.net (8.8.5/8.8.2) with SMTP id UAA02780; Mon, 2 Jun 1997 20:58:32 -0500 (CDT) Date: Mon, 2 Jun 1997 20:58:32 -0500 (CDT) From: Font To: Pat Noack cc: questions@FreeBSD.ORG Subject: Re: adding a new disk In-Reply-To: <9706030008.AA07323@post.holontech.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk I've had the same problem with /stand/sysinstall from 2.1.5 on up (currently at 2.2.2). Currently, 2.2.2 reboots on me when sysinstall writes out the disk label and begins newfs on the partitions in the FreeBSD slice. All devices in /dev seem fine. Performing the actions manually as per the FAQ is somewhat more successful, if more time-consuming. I've had problem with this, too, though. My current workaround is to bring the machine down, use the installation boot floppy to boot up, partition, label, do a minimal install, then reboot on the original drive, mount the partitions, remove the installation and then fill them back up again. A lot of trouble? Yeah. But it works, and takes less thinking than doing things manually. While I'm waiting for it, I can catch up on the mailing lists... A bug in my MUA causes news.announce.newusers font to be sent to beneficiaries and senders of UCE/SPAM. @ mcs.net Wishes are like dishes. On Mon, 2 Jun 1997, Pat Noack wrote: > Date: Mon, 2 Jun 97 17:08:11 PDT > From: Pat Noack > To: questions@FreeBSD.ORG > Subject: adding a new disk > > I've got a freebsd system that currently has one 1 GB scsi disk on it. > This first disk is disk0. I've installed a second 3GB scsi disk as > disk1. I've used sysinstall to setup the new disk by partitioning it > and then trying to label it. I've tried this in about 12 different ways. > Large partitions, small partitions, disks compatible with other operating > systems, disk just for freebsd and all of them dump core when I try to > write the label. > > Are there any memory restrictions/limitations/recomenadations of how > much memory I should have with this configuration. Any thoughts or help > on this setup would be appreciated. > > Pat > From owner-freebsd-questions Mon Jun 2 19:11:36 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA27542 for questions-outgoing; Mon, 2 Jun 1997 19:11:36 -0700 (PDT) Received: from mail.ionet.net (ultra2.ionet.net [206.41.128.42]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA27537 for ; Mon, 2 Jun 1997 19:11:33 -0700 (PDT) From: mag@ionet.net Received: from default ([208.129.67.73]) by mail.ionet.net (8.8.5/8.7.3) with SMTP id VAA21357 for ; Mon, 2 Jun 1997 21:11:23 -0500 (CDT) Message-Id: <199706030211.VAA21357@mail.ionet.net> Comments: Authenticated sender is To: freebsd-questions@FreeBSD.ORG Date: Mon, 2 Jun 1997 21:10:46 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: jdk1.1.2 JDE Priority: normal X-mailer: Pegasus Mail for Win32 (v2.53/R1) Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, I have the port for the Java Development Environment for BSD, but was wondering which jdk version I need with it. Is it the one for Sparc, or for Solaris x86? M. Porter imChat Inc. http://www.imchat.com From owner-freebsd-questions Mon Jun 2 20:20:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA00320 for questions-outgoing; Mon, 2 Jun 1997 20:20:41 -0700 (PDT) Received: from netmug.org (root@netmug.org [207.88.42.250]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id UAA00314 for ; Mon, 2 Jun 1997 20:20:39 -0700 (PDT) Received: from netmug.org (perl@localhost [127.0.0.1]) by netmug.org (8.8.5/8.8.5) with ESMTP id UAA14616; Mon, 2 Jun 1997 20:20:14 -0700 (PDT) Message-Id: <199706030320.UAA14616@netmug.org> To: freebsd-questions@FreeBSD.ORG cc: perl@netmug.org Subject: Security problem with FreeBSD 2.2.1 default installation Date: Mon, 02 Jun 1997 20:20:14 -0700 From: Michael Haro Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, yesterday one of my users gained root access to my system. They did it by exploiting a bug in /usr/bin/sperl4* Why does FreeBSD ship with a security hole? Is this a new one that you didn't know about? How can I remedy the problem? Right now, I deleted the file from the server. I am new to FreeBSD and would like to know how to fix it. Thanks, Michael perl@netmug.org From owner-freebsd-questions Mon Jun 2 20:31:34 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA00764 for questions-outgoing; Mon, 2 Jun 1997 20:31:34 -0700 (PDT) Received: from tok.qiv.com ([204.214.141.211]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id UAA00740; Mon, 2 Jun 1997 20:31:13 -0700 (PDT) Received: (from uucp@localhost) by tok.qiv.com (8.8.5/8.8.5) with UUCP id WAA00421; Mon, 2 Jun 1997 22:30:57 -0500 (CDT) Received: from localhost (jdn@localhost) by acp.qiv.com (8.8.5/8.8.5) with SMTP id WAA00708; Mon, 2 Jun 1997 22:17:57 -0500 (CDT) X-Authentication-Warning: acp.qiv.com: jdn owned process doing -bs Date: Mon, 2 Jun 1997 22:17:57 -0500 (CDT) From: "Jay D. Nelson" To: Glenn Johnson cc: freebsd-questions@FreeBSD.ORG, freebsd-current@FreeBSD.ORG Subject: Re: GIMP In-Reply-To: <199706020439.XAA07595@Gforce.iamerica.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk It made clean and works fine on 2.2.1. -- Jay On Sun, 1 Jun 1997, Glenn Johnson wrote: ->Has anyone else had trouble with the 'gimp-devel 0.99.9 port'? I am running ->3.0 current and am getting the following: -> ->gmake[3]: Leaving directory `/usr/ports/graphics/gimp-devel/work/gimp-0.99.9/pl ->ug-ins/dgimp' ->gmake[2]: *** [all-recursive] Error 1 ->gmake[2]: Leaving directory `/usr/ports/graphics/gimp-devel/work/gimp-0.99.9/pl ->ug-ins' ->gmake[1]: *** [all-recursive] Error 1 ->gmake[1]: Leaving directory `/usr/ports/graphics/gimp-devel/work/gimp-0.99.9' ->gmake: *** [all-recursive-am] Error 2 ->*** Error code 2 -> ->Stop. ->*** Error code 1 -> ->Stop. ->*** Error code 1 -> ->Stop. -> ->Thanks for any help. ->-- ->Glenn Johnson ->gljohnsn@iamerica.net -> -> From owner-freebsd-questions Mon Jun 2 20:38:37 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA01036 for questions-outgoing; Mon, 2 Jun 1997 20:38:37 -0700 (PDT) Received: from emout12.mail.aol.com (emout12.mx.aol.com [198.81.11.38]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id UAA01031 for ; Mon, 2 Jun 1997 20:38:32 -0700 (PDT) From: Almondale@aol.com Received: (from root@localhost) by emout12.mail.aol.com (8.7.6/8.7.3/AOL-2.0.0) id XAA11321; Mon, 2 Jun 1997 23:37:54 -0400 (EDT) Date: Mon, 2 Jun 1997 23:37:54 -0400 (EDT) Message-ID: <970602233548_-1229312139@emout12.mail.aol.com> To: lenzi@bsi.com.br cc: freebsd-questions@freebsd.org Subject: Re: IP Masquerading Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Sergio: I have gotten the ppp -alias to work. My question is: can it go on the same line with -auto. I seem to get an error: %> ppp -alias -auto myisp %> destadr must be specified with -auto I have an ISP who gives me one IP#. I don't ever know the ISP host IP# though. So I have set ifaddr 0 xxx.xxx.xxx.xxx 255.255.255.0 add 0 0 HISADDR in the ppp.conf. It seems to work ok but I don't know if I can put both -auto and -alias on the same command line. Thanks for your suggestions. Alex From owner-freebsd-questions Mon Jun 2 21:43:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA04102 for questions-outgoing; Mon, 2 Jun 1997 21:43:28 -0700 (PDT) Received: from jeep.ops.neosoft.com (dbaker@jeep.ops.NeoSoft.COM [206.109.4.44]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA04097 for ; Mon, 2 Jun 1997 21:43:26 -0700 (PDT) Received: (from dbaker@localhost) by jeep.ops.neosoft.com (8.8.5/8.8.5) id XAA00976 for freebsd-questions@freebsd.org; Mon, 2 Jun 1997 23:43:33 -0500 (CDT) From: Daniel Baker Message-Id: <199706030443.XAA00976@jeep.ops.neosoft.com> Subject: Mirror and '?' To: freebsd-questions@freebsd.org Date: Mon, 2 Jun 1997 23:43:32 -0500 (CDT) X-Mailer: ELM [version 2.4ME+ PL31H (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Does anyone have any problems with mirror redownloading files under a different name? For example, on my GNU mirror, it will have a file named git-4.3.10-4.3.11.diff.gz Mirror will download the file. The next night, when the cron job starts up the mirror master, it will download git-4.3.10-4.3.11.diff.gz?.gz But, mirror claims that it's downloading the file called git-4.3.10-4.3.11.dif.gz^M And it will continue adding on more and more extensions until I blow away all the bogus files, and then it starts over. In terms of directories, if you have a directory called foo, and it gets the whole directory one night, thte next night it will get foo: and then it will get foo::, etc, etc. Any ideas? Thanks Daniel -- Daniel Baker -- Network Operations Administrator -- NeoSoft, Inc. dbaker@neosoft.com dbaker@neo.net Phone: +1 713 968 5800 Fax: +1 713 968 5801 From owner-freebsd-questions Mon Jun 2 22:28:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA05678 for questions-outgoing; Mon, 2 Jun 1997 22:28:39 -0700 (PDT) Received: from iceberg.anchorage.net. (root@iceberg.anchorage.net [207.14.72.150]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id WAA05670 for ; Mon, 2 Jun 1997 22:28:35 -0700 (PDT) Received: from aak.anchorage.net (ai-132 [207.14.72.132]) by iceberg.anchorage.net. (8.6.11/8.7.3) with SMTP id UAA10001; Mon, 2 Jun 1997 20:25:34 -0800 Date: Mon, 2 Jun 1997 21:17:50 -0800 (AKDT) From: Steve Howe X-Sender: abc@aak.anchorage.net To: Ben Ricketts cc: freebsd-questions@FreeBSD.ORG Subject: Re: Help In-Reply-To: <3392D1EF.29F9@sia.net.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Ben Ricketts wrote: > I have tried to copy the boot.flp image to a 1.44 floppy, unfortunateky > it seems that the image file is larger than the capacity of my floppy. > Is there any way to make the image file smaller? > > Help much appreciated > > Ben you'll find 100's of related messages in the archives :) but the answer is no - everything works fine, except maybe you should use rawrite instead of fdimage. -------------------------------------------------------------------- E0BD7BD2 625FC4D0 2ED52811 B1A18A42 http://www.anchorage.net/~un_x -------------------------------------------------------------------- From owner-freebsd-questions Mon Jun 2 22:53:46 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA06740 for questions-outgoing; Mon, 2 Jun 1997 22:53:46 -0700 (PDT) Received: from homer.argo.net.au ([203.25.160.155]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA06732 for ; Mon, 2 Jun 1997 22:53:42 -0700 (PDT) Received: from localhost (jasonm@localhost) by homer.argo.net.au (8.8.5/8.8.5) with SMTP id NAA01560 for ; Tue, 3 Jun 1997 13:47:50 +0800 (WST) Date: Tue, 3 Jun 1997 13:47:49 +0800 (WST) From: Jason McKay To: questions@freebsd.org Subject: Welcome screens & time quotas Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Can someone please explain to me: 1. How do I change the welcome screen before the user name prompt. Unlike Linux, there is no /etc/issue 2. Can anyone suggest a time quota (killer daemon) for FreeBSD, that will logoff users who have been on longer than 15 minutes. Thank you, - Jason. From owner-freebsd-questions Mon Jun 2 23:17:19 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA09211 for questions-outgoing; Mon, 2 Jun 1997 23:17:19 -0700 (PDT) Received: from viam-server.viam.hepi.edu.ge (viam-server.viam.hepi.edu.ge [194.67.216.129]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA09198 for ; Mon, 2 Jun 1997 23:17:08 -0700 (PDT) Received: from viam-server.viam.hepi.edu.ge (viam-server.viam.hepi.edu.ge [194.67.216.129]) by viam-server.viam.hepi.edu.ge (8.8.5/8.8.5) with SMTP id LAA00382; Tue, 3 Jun 1997 11:12:53 +0500 (GET) Date: Tue, 3 Jun 1997 11:12:53 +0500 (GET) From: Valentine Gogichashvili To: Jason McKay cc: questions@FreeBSD.ORG Subject: Re: Welcome screens & time quotas In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > From: Jason McKay > > Can someone please explain to me: > > 1. How do I change the welcome screen before the user name prompt. Unlike > Linux, there is no /etc/issue > see manual page for ``motd'' Valentine Gogichashvili Student of Tbilisi State University department of Physical Informatics and Physical Process Modeling. From owner-freebsd-questions Mon Jun 2 23:37:18 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA10354 for questions-outgoing; Mon, 2 Jun 1997 23:37:18 -0700 (PDT) Received: from rupib.dol.donetsk.ua ([195.230.130.236]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA10332 for ; Mon, 2 Jun 1997 23:36:54 -0700 (PDT) Received: from sysoev (victor [192.168.1.100]) by rupib.dol.donetsk.ua (8.8.5/8.8.5) with SMTP id JAA08578 for ; Tue, 3 Jun 1997 09:36:26 +0300 (EEST) Message-ID: <3393D85D.1BDB@rupib.donetsk.ua> Date: Tue, 03 Jun 1997 09:39:57 +0100 From: "Victor S." Reply-To: victor@rupib.donetsk.ua Organization: PIB X-Mailer: Mozilla 3.01Gold (WinNT; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: About Digi PC/Xe under FreeBSD Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Is Digiboard PC/Xe work under FreeBSD (ver. 2.2.1) ? Regards Victor Sysoev Ukraine From owner-freebsd-questions Mon Jun 2 23:44:36 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA10578 for questions-outgoing; Mon, 2 Jun 1997 23:44:36 -0700 (PDT) Received: from shell6.ba.best.com (jkb@shell6.ba.best.com [206.184.139.137]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA10573 for ; Mon, 2 Jun 1997 23:44:34 -0700 (PDT) Received: from localhost (jkb@localhost) by shell6.ba.best.com (8.8.5/8.7.3) with SMTP id XAA10437; Mon, 2 Jun 1997 23:44:28 -0700 (PDT) X-Authentication-Warning: shell6.ba.best.com: jkb owned process doing -bs Date: Mon, 2 Jun 1997 23:44:28 -0700 (PDT) From: Jan Koum X-Sender: jkb@shell6.ba.best.com To: Jason McKay cc: questions@FreeBSD.ORG Subject: Re: Welcome screens & time quotas In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Jason McKay wrote: > Date: Tue, 3 Jun 1997 13:47:49 +0800 (WST) > From: Jason McKay > To: questions@FreeBSD.ORG > Subject: Welcome screens & time quotas > > Can someone please explain to me: > > 1. How do I change the welcome screen before the user name prompt. Unlike > Linux, there is no /etc/issue > Edit /etc/gettytab for that. -- yan From owner-freebsd-questions Mon Jun 2 23:54:15 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA11170 for questions-outgoing; Mon, 2 Jun 1997 23:54:15 -0700 (PDT) Received: from www.hsc.wvu.edu (www.hsc.wvu.edu [157.182.105.122]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA11161 for ; Mon, 2 Jun 1997 23:54:13 -0700 (PDT) Received: (from rscott@localhost) by www.hsc.wvu.edu (8.7.5/8.7.3) id CAA16693; Tue, 3 Jun 1997 02:53:09 -0400 (EDT) Date: Tue, 3 Jun 1997 02:53:09 -0400 (EDT) From: "R. Scott Murphy" Message-Id: <199706030653.CAA16693@www.hsc.wvu.edu> To: font@Mcs.Net, pnoack@holontech.com Subject: Re: adding a new disk Cc: questions@FreeBSD.ORG Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Pat, Wish I had better new, but after nearly duplicating the efforts mentioned above last week, I ended up doing almost exactly the same thing. I can add that the size question is not an issue (for you, anyway) as I just finished with a 3.2 GB disk. -scott rscott@www.hsc.wvu From owner-freebsd-questions Tue Jun 3 00:53:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA14316 for questions-outgoing; Tue, 3 Jun 1997 00:53:06 -0700 (PDT) Received: from Campino.Informatik.RWTH-Aachen.DE (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA14311 for ; Tue, 3 Jun 1997 00:53:03 -0700 (PDT) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.31.2]) by Campino.Informatik.RWTH-Aachen.DE (RBI-Z-5/8.6.12) with ESMTP id JAA25957; Tue, 3 Jun 1997 09:53:05 +0200 (MET DST) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.8.5/8.6.9) id JAA08215; Tue, 3 Jun 1997 09:57:52 +0200 (MEST) Message-ID: <19970603095751.37865@gil.physik.rwth-aachen.de> Date: Tue, 3 Jun 1997 09:57:51 +0200 From: Christoph Kukulies To: Christer Englund Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Strange message in FreeBSD ver 2.2.2 References: <3392CD2A.22E0@teligent.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.69e In-Reply-To: <3392CD2A.22E0@teligent.se>; from Christer Englund on Mon, Jun 02, 1997 at 03:39:54PM +0200 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, Jun 02, 1997 at 03:39:54PM +0200, Christer Englund wrote: > I have installed FreeBSD 2.2.2 in one of my computers, and > my problem is that the system reports this message: > > inetd login_get class:unknown class `root` > > What is going on? Is this a problem? You need to have /etc/login.conf installed. > > Thank You !! > > Christer Englund > englund@teligent.se > Teligent AB > Sweden -- -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de From owner-freebsd-questions Tue Jun 3 00:57:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA14475 for questions-outgoing; Tue, 3 Jun 1997 00:57:58 -0700 (PDT) Received: from sun4nl.NL.net (sun4nl.NL.net [193.78.240.12]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id AAA14470 for ; Tue, 3 Jun 1997 00:57:55 -0700 (PDT) Received: from smtp01.oce.nl by sun4nl.NL.net (5.65b/NLnet-3.4) id AA22951; Tue, 3 Jun 1997 09:57:53 +0200 Received: by smtp01.oce.nl (5.x/SMI-SVR4) id AA22830; Tue, 3 Jun 1997 09:58:55 +0200 >Return-Path: Received: (qmail 970 invoked from network); 3 Jun 1997 07:52:29 -0000 Received: from st1-jos.oce.nl (134.188.60.60) by ns-venlo.oce.nl with SMTP; 3 Jun 1997 07:52:29 -0000 Received: (qmail 3247 invoked by uid 911); 3 Jun 1997 07:57:12 -0000 Message-Id: <19970603075712.3246.qmail@st1-jos.oce.nl> To: Glenn Johnson Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Encryption in Netscape In-Reply-To: Your message of Sun, 01 Jun 1997 23:04:14 CDT. <199706020404.XAA27804@Gforce.iamerica.net> Date: Tue, 03 Jun 1997 09:57:12 +0200 From: Jos Backus Content-Type: text Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi Glenn, In message <199706020404.XAA27804@Gforce.iamerica.net> you wrote: >I just installed the Netscape Communicator preview 5 port. When I launch >Netscape, I get an error message about not having a valid encryption policy >file. I did a symlink to the policyMoz40P1.jar file in >/usr/local/lib/netscape, but this did not help. Any ideas, or is this >something that is broken in this preview? Thanks. Try moving the file to $HOME/.netscape. ktrace is your friend :-) Groetjes, Jos -- Jos Backus _/ _/_/_/ CIM-ISGA/IS _/ _/ _/ Oce-Technologies B.V. _/ _/_/_/ Venlo, The Netherlands _/ _/ _/ _/ jos@oce.nl _/_/ _/_/_/ #include From owner-freebsd-questions Tue Jun 3 00:58:15 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA14510 for questions-outgoing; Tue, 3 Jun 1997 00:58:15 -0700 (PDT) Received: from gatekeeper.barcode.co.il (gatekeeper.barcode.co.il [192.116.93.17]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA14499 for ; Tue, 3 Jun 1997 00:58:09 -0700 (PDT) Received: (from smap@localhost) by gatekeeper.barcode.co.il (8.8.5/8.6.12) id KAA07341; Tue, 3 Jun 1997 10:56:41 +0300 (IDT) X-Authentication-Warning: gatekeeper.barcode.co.il: smap set sender to using -f Received: from localhost.barcode.co.il(127.0.0.1) by gatekeeper.barcode.co.il via smap (V1.3) id sma007339; Tue Jun 3 10:56:18 1997 Message-ID: <3393CE1E.5D1D@barcode.co.il> Date: Tue, 03 Jun 1997 10:56:14 +0300 From: Nadav Eiron X-Mailer: Mozilla 3.0 (X11; I; SunOS 5.5 sun4m) MIME-Version: 1.0 To: aroin@nt.nttc.org CC: freebsd-questions@FreeBSD.ORG Subject: Re: latest version References: <3391CDE5.38D8@nt.nttc.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk AR wrote: > > I visted your web site, and it sometimes looks as if the latest version > is 3.0, but other time looks as if it is 2.2. I visited your ftp site > and it has something called 3.0SNAP which looked more like a prerelease > than a full version. It also had version 2.2, but also had something > called current. Is current 3.0? I talked to Walnut Creek and the latest > version they have is 2.2. Thanks for your help. Look at http://www.freebsd.org/releases/index.html, and follow the links for -current and -stable if you want to know more about these too. Nadav From owner-freebsd-questions Tue Jun 3 01:01:46 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA14699 for questions-outgoing; Tue, 3 Jun 1997 01:01:46 -0700 (PDT) Received: from ns.sirena.ru ([194.87.123.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA14689 for ; Tue, 3 Jun 1997 01:01:22 -0700 (PDT) Received: by ns.sirena.ru id LAA10999; (8.8.3/vak/1.9) Tue, 3 Jun 1997 11:58:56 +0400 (MSD) From: sysadm@ns.sirena.ru (Sergey V. Chemisov) Message-Id: <199706030758.LAA10999@ns.sirena.ru> Subject: ?gated To: questions@FreeBSD.org Date: Tue, 3 Jun 1997 11:57:40 +0400 (MSD) X-Mailer: ELM [version 2.4ME+ PL22 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk Good Day ! Why I can't see gated demon in the list of ps command? (Our machin have too net interfeices) Chemisov Sergey. Regards! From owner-freebsd-questions Tue Jun 3 01:37:10 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA16380 for questions-outgoing; Tue, 3 Jun 1997 01:37:10 -0700 (PDT) Received: from Campino.Informatik.RWTH-Aachen.DE (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA16373 for ; Tue, 3 Jun 1997 01:37:06 -0700 (PDT) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.31.2]) by Campino.Informatik.RWTH-Aachen.DE (RBI-Z-5/8.6.12) with ESMTP id KAA27252; Tue, 3 Jun 1997 10:37:08 +0200 (MET DST) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.8.5/8.6.9) id KAA08472; Tue, 3 Jun 1997 10:41:56 +0200 (MEST) Message-ID: <19970603104155.64715@gil.physik.rwth-aachen.de> Date: Tue, 3 Jun 1997 10:41:55 +0200 From: Christoph Kukulies To: "Majmundar, Sam" Cc: "'freebsd-questions@FreeBSD.ORG'" Subject: Re: Can't boot - even fixit did not help !!! References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.69e In-Reply-To: ; from Majmundar, Sam on Mon, Jun 02, 1997 at 10:41:44AM -0700 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, Jun 02, 1997 at 10:41:44AM -0700, Majmundar, Sam wrote: > Hi! > > I have a duel boot Pentium with FreeBSD on 3G hard disk on SCSI id 1 and > NT on another 3G hard disk on SCSI ID 0. I usually changed primary boot > device and it worked fine for almost 6 months. Suddenly I can not boot > off How does it manifest, the 'can not boot' ? What is the symptom? Does it not show the Boot: prompt? Does it not find the kernel? fsck failure? Did you overwrite the masterboot record by some Win95 installation? > of the FreeBSD (I guess I have 2.x). I tried to use "fixit.flp" image, > but when > the floppy is mounted, all that I have is "find" command in /mnt2. There > is > no df, du or even mount. How can I salvage my hard disk? Everything you need for fixing should be there if you use the boot.flp-> fixit.flp procedure correctly. After you have booted the boot.flp and inserted the fixit.flp you should do a disklabel -r wd0 (sd0, or whatever your system drive is) if you not already know the partitions and then do a fsck on the raw partitions. You then can proceed mounting your root disk to /mnt (or was it mnt1) and do the necessary repair work. > > ANY HELP WOULD BE GREATLY APPRECIATED! > - Sam -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de From owner-freebsd-questions Tue Jun 3 03:04:12 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA19626 for questions-outgoing; Tue, 3 Jun 1997 03:04:12 -0700 (PDT) Received: from korky.fe.up.pt (korky.fe.up.pt [192.82.214.50]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id CAA19503 for ; Tue, 3 Jun 1997 02:58:56 -0700 (PDT) From: ee96199@tom.fe.up.pt Received: by korky.fe.up.pt; id AA07670; Tue, 3 Jun 1997 10:57:50 GMT Received: from localhost by tom.fe.up.pt; (5.65v3.2/1.1.8.2/16Oct95-1216PM) id AA00709; Tue, 3 Jun 1997 10:59:06 GMT Date: Tue, 3 Jun 1997 10:59:06 +0000 (GMT) Reply-To: ee96199@tom.fe.up.pt To: Jos Backus Cc: freebsd-questions@FreeBSD.ORG Subject: Re: How to go from 2.2.1 (WC CD-ROM) to 2.2.2-REL over the Net? In-Reply-To: <19970602153917.29859.qmail@st1-jos.oce.nl> Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, Jos Backus wrote: > > Greetings all, > > [This is my first post to this list.] > > I have read the FAQ (it doesn't seem to cover this topic), and the Handbook > presents a copious amount of information :-( I guess all I need is the > appropriate supfile entries, run cvsup and then do a 'make world'? I already suffered the trouble you are trying to get in to and I will help! You can use this sup file: ------------ cut here ------------------ *default tag=RELENG_2_2_2_RELEASE *default host=cvsup.nl.freebsd.org # The sources will be put in /usr/src. BE CAREFUL if you don't want to # erase your old sources! *default prefix=/usr # The directory for the status files will be in /usr/sup *default base=/usr *default release=cvs delete use-rel-suffix # If you don't have a very fast connection... *default compress src-all # I think that this collection is ok since Walnut Creek is exporting it # in their CDS. cvs-crypto ------------ cut here ------------------ Do not forget to get cvsup binaries from ftp://hug.freebsd.org/pub/CVSup/ The latest release is 15.0 To run it just do ./cvsup -g -L2 in non-graphical sessions or ./cvsup in graphical sessions. BTW, -g means no graphics support and -L2 is maximum level of verbosity. I am using a variation of this file which enables me to have a copy of the CVS tree (around 300MB) and then I can extract any version of FreeBSD. Currently I am running FreeBSD 2.2-STABLE. > > Sorry for being so dense :-/ I have only recently added FreeBSD to my list of > platforms, following up on a suggestion by a friend. > > Thanks for any pointers you can provide me with. > I hope that this is enough. And **do** read the handbook carefully. Good luck with FreeBSD. The best OS in the world! > > Groetjes, > -- > Jos Backus _/ _/_/_/ CIM-ISGA/IS > _/ _/ _/ Oce-Technologies B.V. > _/ _/_/_/ Venlo, The Netherlands > _/ _/ _/ _/ > jos@oce.nl _/_/ _/_/_/ #include > Regards, Jorge Goncalves -- CVSup has the greatest invention since swap space. :-) From owner-freebsd-questions Tue Jun 3 05:19:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA24914 for questions-outgoing; Tue, 3 Jun 1997 05:19:03 -0700 (PDT) Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA24909 for ; Tue, 3 Jun 1997 05:18:55 -0700 (PDT) Received: from buffnet9.buffnet.net (buffnet9.buffnet.net [205.246.19.19]) by buffnet4.buffnet.net (8.7.5/8.7.3) with SMTP id IAA10834; Tue, 3 Jun 1997 08:19:15 -0400 (EDT) Received: from buffnet11.buffnet.net(205.246.19.55) by buffnet9.buffnet.net via smap (V2.0) id xma001501; Tue, 3 Jun 97 08:17:52 -0400 Date: Tue, 3 Jun 1997 08:18:55 -0400 (EDT) From: Steve To: Michael Haro cc: freebsd-questions@FreeBSD.ORG Subject: Re: Security problem with FreeBSD 2.2.1 default installation In-Reply-To: <199706030320.UAA14616@netmug.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Delete it - you should not have a need for suidperl On Mon, 2 Jun 1997, Michael Haro wrote: > Hi, yesterday one of my users gained root access to my system. > They did it by exploiting a bug in /usr/bin/sperl4* > Why does FreeBSD ship with a security hole? Is this a new one that you didn't > know about? How can I remedy the problem? Right now, I deleted the file from > the server. I am new to FreeBSD and would like to know how to fix it. > > Thanks, > Michael perl@netmug.org > From owner-freebsd-questions Tue Jun 3 05:20:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA25035 for questions-outgoing; Tue, 3 Jun 1997 05:20:28 -0700 (PDT) Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA25030 for ; Tue, 3 Jun 1997 05:20:25 -0700 (PDT) Received: from buffnet9.buffnet.net (buffnet9.buffnet.net [205.246.19.19]) by buffnet4.buffnet.net (8.7.5/8.7.3) with SMTP id IAA10891 for ; Tue, 3 Jun 1997 08:20:51 -0400 (EDT) Received: from buffnet11.buffnet.net(205.246.19.55) by buffnet9.buffnet.net via smap (V2.0) id xma001617; Tue, 3 Jun 97 08:19:21 -0400 Date: Tue, 3 Jun 1997 08:20:22 -0400 (EDT) From: Steve To: freebsd-questions@freebsd.org Subject: Odd error message Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk My new 2.2.2 shows this error: login_getclass: unknown class 'root' inetd is gen'ing them, su does too. Things seem to be running anyways, but I thought I would bring this up. From owner-freebsd-questions Tue Jun 3 05:27:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA25255 for questions-outgoing; Tue, 3 Jun 1997 05:27:58 -0700 (PDT) Received: from inetstrat.com (scott@inetstrat.com [205.197.223.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA25250 for ; Tue, 3 Jun 1997 05:27:55 -0700 (PDT) Received: from localhost (scott@localhost) by inetstrat.com (8.8.5/8.8.5) with SMTP id IAA19374; Tue, 3 Jun 1997 08:41:40 -0400 (EDT) Date: Tue, 3 Jun 1997 08:41:40 -0400 (EDT) From: Scott Rothgaber To: Nathan Schuler cc: Christoph Goetze , freebsd-questions@FreeBSD.ORG, bsdi-users@bsdi.com Subject: Re: CD-ROM In-Reply-To: <2.2.32.19970602203206.006a3324@sparrow.sanasys.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, Nathan Schuler wrote: > First hint, avoid Linux. Linux is OK, but for serious use it is just not > acceptable at all. This is a little strong. I know of at least one ISP that is all-Linux. But, even though it can do everything BSDI can do, it will take a lot of work to get it as secure (shadowing, etc.) as BSDI. Of the two, BSDI is the better choice for a commercial situation. From owner-freebsd-questions Tue Jun 3 05:29:33 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA25394 for questions-outgoing; Tue, 3 Jun 1997 05:29:33 -0700 (PDT) Received: from blue.bad.bris.ac.uk (blue.bad.bris.ac.uk [137.222.132.60]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id FAA25375 for ; Tue, 3 Jun 1997 05:29:27 -0700 (PDT) Received: (qmail 20062 invoked by uid 57242); 3 Jun 1997 12:31:57 -0000 Date: Tue, 3 Jun 1997 13:31:55 +0100 (BST) From: Aled Treharne Reply-To: felix@royal.net To: Valentine Gogichashvili cc: Jason McKay , questions@FreeBSD.ORG Subject: Re: Welcome screens & time quotas In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Valentine Gogichashvili wrote: > > From: Jason McKay > > > > Can someone please explain to me: > > > > 1. How do I change the welcome screen before the user name prompt. Unlike > > Linux, there is no /etc/issue > > > > see manual page for ``motd'' I beleive that the file you want to edit is /etc/gettytab. The syntax is somewhat obtuse; below is an example of mt own "default" line setting: default:\ :cb:ce:ck:lc:fd#1000:im=\r\nSECURE SERVER (%h) (%t)\r\n\r\nSECURITY NOTICE This machine is not for public use\r\nDo not touch this machine\r\n\r\n:Gwydion sp#1200: "default:\" is on one line and the rest on the next line. The whole entry has to be all on one line. and the result comes out as: SECURE SERVER (gwydion.bad.bris.ac.uk) (ttyv3) SECURITY NOTICE This machine is not for public use Do not touch this machine. login: Hope this helps, -Taff. Aled Treharne felix@royal.net "Big Bird meets Salvador Dali has been brought to you by the numbers L and ), and by the letter 3." For PGP Public key finger taff@blue.bad.bris.ac.uk #include(disclaim.h) From owner-freebsd-questions Tue Jun 3 05:50:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA26457 for questions-outgoing; Tue, 3 Jun 1997 05:50:04 -0700 (PDT) Received: from juris.prdf.mpf.gov.br (root@juris.prdf.mpf.gov.br [200.130.34.3]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA26418 for ; Tue, 3 Jun 1997 05:49:54 -0700 (PDT) Received: from suporte_1.prdf.mpf.gov.br (luthor@suporte-1.prdf.mpf.gov.br.34.130.200.in-addr.arpa [200.130.34.31]) by juris.prdf.mpf.gov.br (8.8.5/8.8.5) with ESMTP id JAA00198 for ; Tue, 3 Jun 1997 09:52:39 -0300 (EST) Message-ID: <33941294.9779DC6D@prdf.mpf.gov.br> Date: Tue, 03 Jun 1997 09:48:20 -0300 From: "Alex Antão" X-Mailer: Mozilla 4.0b5 [en] (Win95; I) MIME-Version: 1.0 To: "FreeBSD - Lista de Discussão Brasileira" Subject: --> Panic error X-Priority: 3 (Normal) Content-Type: text/plain; charset=iso-8859-1 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk (PLEASE, Cc to me, I'm not subscribed this list, THANKS) Hi, I'm triyng to boot my Pentium with 2.2.2-RELEASE floppie, but at the end of the probes, I get a panic : double fault syncing disks.... and the instalation does not continue. thanks, -- ___________________________________ _________________________ / Alex Carlos Braga Antao \ /_ __ \ | UnB - Universidade de Brasilia | // ...on IRC | | | // ____ | | e-mail : luthor@prdf.mpf.gov.br | // / _/________ | | http://www.prdf.mpf.gov.br/~luthor | /____ /_/ / /) (_) / | \___________________________________/ \_______It's me !_________/ From owner-freebsd-questions Tue Jun 3 06:17:21 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA27845 for questions-outgoing; Tue, 3 Jun 1997 06:17:21 -0700 (PDT) Received: from darius.concentric.net (darius.concentric.net [207.155.184.79]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA27840 for ; Tue, 3 Jun 1997 06:17:18 -0700 (PDT) Received: from newman.concentric.net (newman [207.155.184.71]) by darius.concentric.net (8.8.5/(97/05/21 3.30)) id JAA15868; Tue, 3 Jun 1997 09:17:17 -0400 (EDT) [1-800-745-2747 The Concentric Network] Received: from athena (ts001d22.sal-ut.concentric.net [206.173.156.34]) by newman.concentric.net (8.8.5) id JAA28288; Tue, 3 Jun 1997 09:17:06 -0400 (EDT) Message-ID: <3394190C.9E3CBA40@concentric.net> Date: Tue, 03 Jun 1997 07:15:56 -0600 From: Joshua Fielden Organization: Shaggy Enterprises X-Mailer: Mozilla 4.0b5 [en] (WinNT; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Re: CD-ROM X-Priority: 3 (Normal) References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Scott Rothgaber wrote: > > On Mon, 2 Jun 1997, Nathan Schuler wrote: > > > First hint, avoid Linux. Linux is OK, but for serious use it is just not > > acceptable at all. > > This is a little strong. I know of at least one ISP that is all-Linux. > > But, even though it can do everything BSDI can do, it will take a lot of > work to get it as secure (shadowing, etc.) as BSDI. Of the two, BSDI is > the better choice for a commercial situation. AFAIK, Red Hat 4.0 has got shadowing..... JF From owner-freebsd-questions Tue Jun 3 06:26:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA28178 for questions-outgoing; Tue, 3 Jun 1997 06:26:08 -0700 (PDT) Received: from fore.com (mailhub.fore.com [192.88.243.4]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA28173 for ; Tue, 3 Jun 1997 06:26:06 -0700 (PDT) Received: from dolphin.fore.com (dolphin-eth.fore.com [192.88.243.27]) by fore.com (8.7.3/8.6.11) with ESMTP id JAA16786; Tue, 3 Jun 1997 09:20:03 -0400 (EDT) Received: from jwb.fore.com (jbeiter-pc.fore.com [169.144.6.16]) by dolphin.fore.com (8.7.5/8.7.3) with ESMTP id JAA17851; Tue, 3 Jun 1997 09:24:09 -0400 (EDT) Received: (from jwb@localhost) by jwb.fore.com (8.8.5/8.8.5) id JAA05155; Tue, 3 Jun 1997 09:17:48 -0400 (EDT) Message-Id: <199706031317.JAA05155@jwb.fore.com> Subject: Re: ppp and static IP In-Reply-To: <19970602221032.NH28135@uriah.heep.sax.de> from J Wunsch at "Jun 2, 97 10:10:32 pm" To: joerg_wunsch@uriah.heep.sax.de Date: Tue, 3 Jun 1997 09:17:48 -0400 (EDT) Cc: questions@freebsd.org, jwb@fore.com From: X-Mailer: ELM [version 2.4ME+ PL28 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk J Wunsch said and I quote: ]As Jordan K. Hubbard wrote: ] ]> In any case, you tell us absolutely nothing about how ppp actually ]> fails, so how are we supposed to help you? :-( ] ]Also, if dynamic IP works, i don't seen any problem why _not_ to use ]them. That's the good thing with PPP: you can leave the IP address ]open for negotiation, and it's just a matter of the other end which ]address to provide. ] ]This is probably best placed in -questions. Guys, this isn't a "problem" for me. I'll just use slip until the next Bay or freebsd upgrade comes along or until I change providers (whichever comes first). The reasons why I have a static IP address are numerous and not relevant. This is a compatibility issue between a Bay release and seems to be unique to freebsd pppd. Bay claims the freebsd crew screwed up. I thought you might like to know. If I am wrong on either assumption please accept my sincere apologies. I'm a user, not a developer (or even programmer for that matter). BTW: I brought this up in -questions first and tried the suggestions. - JoeB From owner-freebsd-questions Tue Jun 3 06:32:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA28529 for questions-outgoing; Tue, 3 Jun 1997 06:32:03 -0700 (PDT) Received: from inetgate.bls.com (bisin1.bls.com [192.203.159.6]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id GAA28508 for ; Tue, 3 Jun 1997 06:32:01 -0700 (PDT) Received: from mailhub.bscc.bls.com ([30.153.14.2]) by inetgate.bls.com with SMTP id AA23898 (5.67a/IDA-1.4.4 for ); Tue, 3 Jun 1997 09:31:37 -0400 Received: from bsccgw.bscc.bls.com by mailhub.bscc.bls.com with SMTP (8.7.5/16.2) id JAA07359; Tue, 3 Jun 1997 09:28:33 -0400 Received: by bsccgw.bscc.bls.com with Microsoft Mail id <33941CCF@bsccgw.bscc.bls.com>; Tue, 03 Jun 97 09:31:59 EDT From: Mackay John - Artisys To: "'freebsd-questions@freebsd.org'" Date: Tue, 03 Jun 97 09:26:00 EDT Message-Id: <33941CCF@bsccgw.bscc.bls.com> Encoding: 8 TEXT X-Mailer: Microsoft Mail V3.0 Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Does FreeBSD support the IBM Auto 16/4 Token-Ring ISA Adapter Card? If not, is there another free (or cheap) Unix OS that does support this that might work on a Compaq PC/IDE drive controllers and very standard misc harware. I have 1.1 gig hd space to spend on it with 32 megs RAM. Thanks, John MacKay From owner-freebsd-questions Tue Jun 3 06:44:46 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA29217 for questions-outgoing; Tue, 3 Jun 1997 06:44:46 -0700 (PDT) Received: from dorotech.fr (mail.dorotech.fr [193.56.144.1]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id GAA29207 for ; Tue, 3 Jun 1997 06:44:41 -0700 (PDT) Received: from fritz.UUCP (uucp@localhost) by dorotech.fr (8.6.12/8.6.10) with UUCP id PAA26743; Tue, 3 Jun 1997 15:47:17 +0200 Received: from pchot4 by fritz.dorotech.fr (4.1/SMI-4.1) id AA10079; Tue, 3 Jun 97 15:30:59 +0200 Message-Id: <33941F2C.41C67EA6@dorotech.fr> Date: Tue, 03 Jun 1997 13:42:04 +0000 From: Patrice BLEUZE X-Mailer: Mozilla 2.0 (X11; I; FreeBSD 2.2.1-RELEASE i386) Mime-Version: 1.0 To: Steve Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Odd error message References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Steve wrote: > > My new 2.2.2 shows this error: > > login_getclass: unknown class 'root' > > inetd is gen'ing them, su does too. Things seem to be running anyways, > but I thought I would bring this up. >From the ERRATA.TXT file : jkh@time-> more ERRATA.TXT Last minute errata: ------------------- o login as root produces "login_getclass: unknown class 'root'" on system console. Fix: If you have the source distribution installed, simply cp /usr/src/etc/login.conf /etc otherwise, mount the 2nd CDROM and copy it from the live filesystem (cp /cdrom/usr/src/etc/login.conf /etc) instead. From owner-freebsd-questions Tue Jun 3 07:44:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA01772 for questions-outgoing; Tue, 3 Jun 1997 07:44:30 -0700 (PDT) Received: from whqvax.picker.com (whqvax.picker.com [144.54.1.1]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id HAA01767 for ; Tue, 3 Jun 1997 07:44:28 -0700 (PDT) Received: from ct.picker.com by whqvax.picker.com with SMTP; Tue, 3 Jun 1997 10:43:42 -0400 (EDT) Received: from elmer.ct.picker.com ([144.54.57.34]) by ct.picker.com (4.1/SMI-4.1) id AA25976; Tue, 3 Jun 97 10:43:40 EDT Received: by elmer.ct.picker.com (SMI-8.6/SMI-SVR4) id KAA02521; Tue, 3 Jun 1997 10:42:23 -0400 Message-Id: <19970603104222.02417@ct.picker.com> Date: Tue, 3 Jun 1997 10:42:22 -0400 From: Randall Hopper To: crtb@capecod.net Cc: questions@FreeBSD.ORG Subject: Re: Adobe PDF - how to decode in FreeBSD References: <199706012128.RAA01446@localhost.nih.gov> <199706021502.KAA25444@horton.iaces.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 In-Reply-To: <199706021502.KAA25444@horton.iaces.com>; from Paul T. Root on Mon, Jun 02, 1997 at 10:02:25AM -0500 Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Paul T. Root: |In a previous message, Chuck said: |> > Yes, Acrobat reader can be used with Linux binary emulation |> > module. | |It's probably time to upgrade. If you don't want to run linux emulation |you can try xpdf. It does a pretty good job. xpdf and Ghostscript will both do normal PDFs pretty well. But for now (due to export restrictions) neither supports encrypted PDFs (in the US, that is). For these, you'll have to fall back on AcroRead (or get and Australian buddy to convert it with his/her GhostScript :-). Randall Hopper From owner-freebsd-questions Tue Jun 3 07:46:01 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA01829 for questions-outgoing; Tue, 3 Jun 1997 07:46:01 -0700 (PDT) Received: from E-MAIL.COM (e-mail.com [204.146.168.195]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id HAA01801 for ; Tue, 3 Jun 1997 07:45:50 -0700 (PDT) Received: from IMXGATE.COM by E-MAIL.COM (IBM VM SMTP V2R3) with BSMTP id 9348; Tue, 03 Jun 97 10:45:48 EDT Received: from sv13.cis.squared.com by imxgate.com (IBM VM SMTP V2R3) with TCP; Tue, 03 Jun 97 10:45:15 EDT Received: from mg01a.mhs.squared.com by sv13.cis.squared.com (AIX 4.1/UCB 5.64/4.03) id AA22474; Tue, 3 Jun 1997 10:44:29 -0400 Received: from NetWare MHS (SMF70) by mg01a.mhs.squared.com via Connect2-SMTP 4.00.b27D; Tue, 3 Jun 1997 10:34:49 -0300 Message-Id: <4F1AF95B0187397C@mg01a.mhs.squared.com> Date: Mon, 2 Jun 1997 10:46:59 -0400 From: "Sexton, Robert" Organization: Square D To: freebsd-questions@hub.freebsd.org Subject: Shared Source Tree Mime-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7BIT X-Mailer: Connect2-SMTP 4.00.b27D MHS to SMTP Gateway Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Is it possible under 2.2 to NFS-share a source tree? I found a discussion of this 18 months ago where Jordan said that every host needs it's own /usr/src. I'm hoping this has changed, because I'd really like to maintain only one tree with cvsup. I did try to Readonly mount the existing 2.2 tree via NFS, but make world died about halfway through with a write error. Thanks, Robert Sexton From owner-freebsd-questions Tue Jun 3 07:48:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA01954 for questions-outgoing; Tue, 3 Jun 1997 07:48:06 -0700 (PDT) Received: from sun4nl.NL.net (sun4nl.NL.net [193.78.240.12]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id HAA01949 for ; Tue, 3 Jun 1997 07:48:03 -0700 (PDT) Received: from smtp01.oce.nl by sun4nl.NL.net (5.65b/NLnet-3.4) id AA03648; Tue, 3 Jun 1997 16:47:51 +0200 Received: by smtp01.oce.nl (5.x/SMI-SVR4) id AA02300; Tue, 3 Jun 1997 16:48:52 +0200 >Return-Path: Received: (qmail 1445 invoked from network); 3 Jun 1997 14:45:07 -0000 Received: from st1-jos.oce.nl (134.188.60.60) by ns-venlo.oce.nl with SMTP; 3 Jun 1997 14:45:06 -0000 Received: (qmail 7965 invoked by uid 911); 3 Jun 1997 14:49:50 -0000 Message-Id: <19970603144950.7964.qmail@st1-jos.oce.nl> To: ee96199@tom.fe.up.pt Cc: freebsd-questions@FreeBSD.ORG Subject: Re: How to go from 2.2.1 (WC CD-ROM) to 2.2.2-REL over the Net? In-Reply-To: Your message of Tue, 03 Jun 1997 10:59:06 -0000. Date: Tue, 03 Jun 1997 16:49:50 +0200 From: Jos Backus Content-Type: text Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello Jorge, In message you wrote: >I