Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 15 Jan 2012 09:53:26 +0000
From:      james <>
Subject:   Problem with mfi driver, 9.0-RELEASE
Message-ID:  <>

Next in thread | Raw E-Mail | Index | Archive | Help
I transferred a PERC5/i controller to my NAS system, which is using a 
Sapphire mini-ITX board with an AMD M350 CPU.

It seems the card is detected but driver initialisation fails:

mfi0: <Dell PERC 5/i> mem 0xd0000000-0xd000ffff,0xfea00000-0xfea1ffff 
irq 96 at device 14.0 on pci2
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 10970 (379716350s/0x0020/info) - Hibernate command received from host
mfi0: 10971 (boot + 0s/0x0020/info) - Firmware initialization started 
(PCI ID 0015/1028/1f02/1028)
mfi0: 10972 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 10973 (boot + 0s/0x0020/info) - Firmware initialization started 
(PCI ID 0015/1028/1f02/1028)
mfi0: 11056 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info: 
enclPd=ffff, scsiType=0, portMap=01, 
mfi0: 11057 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11058 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info: 
enclPd=ffff, scsiType=0, portMap=02, 
mfi0: Cannot allocate interrupt
device_attach: mfi0 attach returned 22

This would seem to be similar to discussions in November which 
eventually led to JHB committing change in r227580 (and perhaps earlier).

I have downloaded the sources for 9.0-RELEASE and it looks like this 
commit did not get back-ported to the release branch.

I'm a bit of a noob with FreeBSD.  The instructions for tracking 
FreeBSD-STABLE seem a bit scary.  Is that the only way that I would get 
the necessary fixes for the mfi driver?  (Indeed, would I get those on 
FreeBSD stable?)


Want to link to this message? Use this URL: <>