Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 14 Aug 1999 11:07:00 +0200 (CEST)
From:      Wilko Bulte <wilko@yedi.iaf.nl>
To:        rgrimes@gndrsh.aac.dev.com (Rodney W. Grimes)
Cc:        mike@smith.net.au, freebsd-stable@FreeBSD.ORG
Subject:   Re: On freezes in 3.2-Stable (fwd)
Message-ID:  <199908140907.LAA53789@yedi.iaf.nl>
In-Reply-To: <199908140046.RAA02542@gndrsh.aac.dev.com> from "Rodney W. Grimes" at "Aug 13, 1999  5:46: 1 pm"

next in thread | previous in thread | raw e-mail | index | archive | help
As Rodney W. Grimes wrote ...

> > Er.  The Intel AD450NX has 32 DIMM sockets.  Unless someone starts 
> > making 2-chip DIMMs, I don't see how you would run 8GB in this box (and 
> > I have seen it being done under other operating systems).
> 
> The Intel AD450NX in in the class ``supporting 8 sockets or more''.
> The Intel AD450NX is in the class ``high dollar server machines''.
> 
> > 
> > You might want to qualify the issue a little further; specifically with 
> > regard to "typical memory controllers", logic families and fanout.
> 
> I think I qualified it plenty enough...
> 
> As far as logic families and fanout, well they really don't matter much
> with regards to this issue, memory drivers are special, not made with the
> same configuration that the logic family is, and thus it's fanout is
> quite different.  The constant has been 72 for a very long time, since I
> started duing mos memory system designs with 54xx/74xx TTL in the 80's
> until today with the latest in CMOS and BiCMOS.  Yea.. I could design a
> supper honking driver that can drive 288 chips in the memory controller,
> but then all the RAM chips would have to have larger data drivers to
> handle that side of the bus.

You could use buffered DIMMs I guess. Not really PC standard stuff though.

-- 
|   / o / /  _  	 Arnhem, The Netherlands	- Powered by FreeBSD -
|/|/ / / /( (_) Bulte 	 WWW  : http://www.tcja.nl 	http://www.freebsd.org


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199908140907.LAA53789>