Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 30 Dec 2009 09:25:56 +0100
From:      Joerg Wunsch <j@uriah.heep.sax.de>
To:        freebsd-acpi@freebsd.org
Subject:   FreeBSD 8.0 hangs on boot with ACPI enabled
Message-ID:  <20091230082556.GD1637@uriah.heep.sax.de>

next in thread | raw e-mail | index | archive | help

--cWoXeonUoKmBZSoM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

I've got an old mainboard here which I wanted to use as a scratch
machine now.  As I don't have the (PCI-based) VGA card anymore that
used to work there, I found an older AGP-based card.  Using this card,
FreeBSD (including 8.0-RELEASE) does not boot with ACPI enabled, it
hangs when detecting the disks (right after the "md0: Preloaded
image..." message).

If I disable ACPI, it boots fine.

As I cannot find a PCI-based VGA, I cannot test that anymore, but the
board used to be my main working machine in the past, including ACPI.

Find both boot (verbose) messages attached, captured from a serial
console.

Does anyone have any ideas?
-- 
cheers, J"org               .-.-.   --... ...--   -.. .  DL8DTL

http://www.sax.de/~joerg/                        NIC: JW11-RIPE
Never trust an operating system you don't have sources for. ;-)

--cWoXeonUoKmBZSoM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot-acpi.messages"

SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000dc000 len=0000000000004000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff0000 len=0000000000008000
SMAP type=04 base=000000001fff8000 len=0000000000008000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc13a7000.
Preloaded mfs_root "/boot/mfsroot" at 0xc13a7174.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 908957209 Hz
CPU: AMD Athlon(tm) Processor (908.96-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x000000001f6a9fff, 505954304 bytes (123524 pages)
avail memory = 506499072 (483 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fdb40
bios32: Entry = 0xfdb50 (c00fdb50)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb71
pnpbios: Found PnP BIOS data at 0xc00f7740
pnpbios: Entry = f0000:6634  Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
ACPI: RSDP 0xfabb0 00014 (v0 AMI   )
ACPI: RSDT 0x1fff0000 00028 (v1 AMIINT          00000010 MSFT 00000097)
ACPI: FACP 0x1fff0030 00074 (v1 AMIINT          00000011 MSFT 00000097)
ACPI: DSDT 0x1fff00b0 01E4B (v1 AMD75X IRONGATE 00001000 MSFT 0100000B)
ACPI: FACS 0x1fff8000 00040
npx0: INT 16 interface
acpi0: <AMIINT > on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: wakeup code va 0xc3121000 pa 0x1000
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80003b5c
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=70061022)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \_SB_.PCI0.TMEM -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.PMU_.PIRQ -> bus 0 dev 7 func 3
ACPI timer: 1/2 1/2 1/1 1/2 1/2 1/2 1/2 1/1 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0    9   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   12   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   12   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.7.INTD at func 4: 12
ACPI: Found matching pin for 0.8.INTA at func 0: 9
ACPI: Found matching pin for 0.10.INTA at func 0: 10
ACPI: Found matching pin for 0.11.INTA at func 0: 12
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x7006, revid=0x25
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
        lattimer=0x78 (3600 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
        map[14]: type Prefetchable Memory, range 32, base 0xefdff000, size 12, enabled
        map[18]: type I/O Port, range 32, base 0xd800, size  2, port disabled
found-> vendor=0x1022, dev=0x7007, revid=0x01
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
        lattimer=0x78 (3600 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7408, revid=0x01
        domain=0, bus=0, slot=7, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7409, revid=0x07
        domain=0, bus=0, slot=7, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type I/O Port, range 32, base 0xf000, size  4, enabled
found-> vendor=0x1022, dev=0x740b, revid=0x03
        domain=0, bus=0, slot=7, func=3
        class=06-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x78 (3600 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x740c, revid=0x06
        domain=0, bus=0, slot=7, func=4
        class=0c-03-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
        lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
        intpin=d, irq=12
        map[10]: type Memory, range 32, base 0xefffc000, size 12, enabled
pcib0: matched entry for 0.7.INTD (src \_SB_.LNKD:0)
pcib0: slot 7 INTD routed to irq 12 via \_SB_.LNKD
found-> vendor=0x1274, dev=0x5880, revid=0x02
        domain=0, bus=0, slot=8, func=0
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
        intpin=a, irq=9
        powerspec 1  supports D0 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0xda00, size  6, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.LNKA:0)
pcib0: slot 8 INTA routed to irq 9 via \_SB_.LNKA
found-> vendor=0x9005, dev=0x0080, revid=0x02
        domain=0, bus=0, slot=10, func=0
        class=01-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type I/O Port, range 32, base 0xde00, size  8, enabled
        map[14]: type Memory, range 64, base 0xeffff000, size 12, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.LNKC:0)
pcib0: slot 10 INTA routed to irq 10 via \_SB_.LNKC
found-> vendor=0x10b7, dev=0x9055, revid=0x30
        domain=0, bus=0, slot=11, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
        intpin=a, irq=12
        powerspec 1  supports D0 D1 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0xdc00, size  7, enabled
        map[14]: type Memory, range 32, base 0xefffef80, size  7, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.LNKD:0)
pcib0: slot 11 INTA routed to irq 12 via \_SB_.LNKD
agp0: <AMD 751 host to AGP bridge> on hostb0
hostb0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000
hostb0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xefdff000
agp0: allocating GATT for aperture of size 256M
agp0: gatt -> ag_pdir 0x1d67000
agp0: allocating GATT for 65536 AGP page entries
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xa000-0xbfff
pcib1:   memory decode     0xefe00000-0xefefffff
pcib1:   prefetched decode 0xafc00000-0xcfcfffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x5961, revid=0x01
        domain=0, bus=1, slot=5, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Prefetchable Memory, range 32, base 0xb0000000, size 28, enabled
pcib1: requested memory range 0xb0000000-0xbfffffff: good
        map[14]: type I/O Port, range 32, base 0xb800, size  8, enabled
pcib1: requested I/O range 0xb800-0xb8ff: in range
        map[18]: type Memory, range 32, base 0xefef0000, size 16, enabled
pcib1: requested memory range 0xefef0000-0xefefffff: good
pcib0: matched entry for 0.1.INTB (src \_SB_.LNKB:0)
pcib0: slot 1 INTB routed to irq 11 via \_SB_.LNKB
pcib1: slot 5 INTA is routed to irq 11
vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem 0xb0000000-0xbfffffff,0xefef0000-0xefefffff irq 11 at device 5.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 756 UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <bridge> at device 7.3 (no driver attached)
ohci0: <AMD-756 USB Controller> mem 0xefffc000-0xefffcfff irq 12 at device 7.4 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefffc000
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <AMD-756 USB Controller> on ohci0
pci0: <multimedia, audio> at device 8.0 (no driver attached)
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> mem 0xeffff000-0xefffffff irq 10 at device 10.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Lazy allocation of 0x100 bytes rid 0x10 type 4 at 0x1000
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560
ahc0: [MPSAFE]
ahc0: [ITHREAD]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xefffef80-0xefffefff irq 12 at device 11.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xefffef80
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:01:02:d9:b4:95
xl0: [MPSAFE]
xl0: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [FILTER]
fd0: <2880-KB 3.5" drive (in 1440-KB mode)> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart1: fast interrupt
ppc1: using extended I/O port range
ppc1: SPP ECP  ECP+EPP
ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 5 drq 3 on acpi0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/9 bytes threshold
ppc1: [MPSAFE]
ppc1: [ITHREAD]
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
plip0: [MPSAFE]
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [MPSAFE]
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xd3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port found at 0x378
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at port 0x378-0x37f irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 908957209 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0f6dfe0

--cWoXeonUoKmBZSoM
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot-noacpi.messages"

SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000dc000 len=0000000000004000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff0000 len=0000000000008000
SMAP type=04 base=000000001fff8000 len=0000000000008000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc13a7000.
Preloaded mfs_root "/boot/mfsroot" at 0xc13a7174.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 908958603 Hz
CPU: AMD Athlon(tm) Processor (908.96-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x000000001f6a9fff, 505954304 bytes (123524 pages)
avail memory = 506499072 (483 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fdb40
bios32: Entry = 0xfdb50 (c00fdb50)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb71
pnpbios: Found PnP BIOS data at 0xc00f7740
pnpbios: Entry = f0000:6634  Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
npx0: INT 16 interface
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80003b5c
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=70061022)
pcibios: BIOS version 2.10
pcib0: <AMD-751 host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link  IRQ  Rtd  Ref  IRQs
 0x1  255   N     6  3 4 5 7 9 10 11 12 14 15
 0x2  255   N     6  3 4 5 7 9 10 11 12 14 15
 0x3  255   N     6  3 4 5 7 9 10 11 12 14 15
 0x4  255   N     7  3 4 5 7 9 10 11 12 14 15
0xfe  255   N     1  14
0xff  255   N     1  15
$PIR: Found matching pin for 0.7.INTD at func 4: 12
$PIR: Found matching pin for 0.8.INTA at func 0: 9
$PIR: Found matching pin for 0.10.INTA at func 0: 10
$PIR: Found matching pin for 0.11.INTA at func 0: 12
$PIR: Links after initial IRQ discovery:
Link  IRQ  Rtd  Ref  IRQs
 0x1    9   Y     6  3 4 5 7 9 10 11 12 14 15
 0x2  255   N     6  3 4 5 7 9 10 11 12 14 15
 0x3   10   Y     6  3 4 5 7 9 10 11 12 14 15
 0x4   12   Y     7  3 4 5 7 9 10 11 12 14 15
0xfe  255   N     1  14
0xff  255   N     1  15
$PIR: IRQs used by BIOS: 9 10 12
$PIR: Interrupt Weights:
[    0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15 ]
[    0   0   0   0   0   0   0   0   0   6   6   0   7   0   0   0 ]
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x7006, revid=0x25
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
        lattimer=0x78 (3600 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
        map[14]: type Prefetchable Memory, range 32, base 0xefdff000, size 12, enabled
        map[18]: type I/O Port, range 32, base 0xd800, size  2, port disabled
found-> vendor=0x1022, dev=0x7007, revid=0x01
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
        lattimer=0x78 (3600 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7408, revid=0x01
        domain=0, bus=0, slot=7, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7409, revid=0x07
        domain=0, bus=0, slot=7, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type I/O Port, range 32, base 0xf000, size  4, enabled
found-> vendor=0x1022, dev=0x740b, revid=0x03
        domain=0, bus=0, slot=7, func=3
        class=06-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x78 (3600 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x740c, revid=0x06
        domain=0, bus=0, slot=7, func=4
        class=0c-03-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
        lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
        intpin=d, irq=12
        map[10]: type Memory, range 32, base 0xefffc000, size 12, enabled
$PIR: 0:7 INTD routed to irq 12
found-> vendor=0x1274, dev=0x5880, revid=0x02
        domain=0, bus=0, slot=8, func=0
        class=04-01-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
        intpin=a, irq=9
        powerspec 1  supports D0 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0xda00, size  6, enabled
$PIR: 0:8 INTA routed to irq 9
found-> vendor=0x9005, dev=0x0080, revid=0x02
        domain=0, bus=0, slot=10, func=0
        class=01-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type I/O Port, range 32, base 0xde00, size  8, enabled
        map[14]: type Memory, range 64, base 0xeffff000, size 12, enabled
$PIR: 0:10 INTA routed to irq 10
found-> vendor=0x10b7, dev=0x9055, revid=0x30
        domain=0, bus=0, slot=11, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
        intpin=a, irq=12
        powerspec 1  supports D0 D1 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0xdc00, size  7, enabled
        map[14]: type Memory, range 32, base 0xefffef80, size  7, enabled
$PIR: 0:11 INTA routed to irq 12
agp0: <AMD 751 host to AGP bridge> on hostb0
hostb0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000
hostb0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xefdff000
agp0: allocating GATT for aperture of size 256M
agp0: gatt -> ag_pdir 0x1d67000
agp0: allocating GATT for 65536 AGP page entries
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xa000-0xbfff
pcib1:   memory decode     0xefe00000-0xefefffff
pcib1:   prefetched decode 0xafc00000-0xcfcfffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x5961, revid=0x01
        domain=0, bus=1, slot=5, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Prefetchable Memory, range 32, base 0xb0000000, size 28, enabled
pcib1: requested memory range 0xb0000000-0xbfffffff: good
        map[14]: type I/O Port, range 32, base 0xb800, size  8, enabled
pcib1: requested I/O range 0xb800-0xb8ff: in range
        map[18]: type Memory, range 32, base 0xefef0000, size 16, enabled
pcib1: requested memory range 0xefef0000-0xefefffff: good
$PIR: Found IRQ 9 for link 0x2 from 9 10 12
$PIR: 0:1 INTB routed to irq 9
pcib1: slot 5 INTA is routed to irq 9
vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem 0xb0000000-0xbfffffff,0xefef0000-0xefefffff irq 9 at device 5.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 756 UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <bridge> at device 7.3 (no driver attached)
ohci0: <AMD-756 USB Controller> mem 0xefffc000-0xefffcfff irq 12 at device 7.4 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefffc000
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <AMD-756 USB Controller> on ohci0
pci0: <multimedia, audio> at device 8.0 (no driver attached)
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xde00-0xdeff mem 0xeffff000-0xefffffff irq 10 at device 10.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xde00
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560
ahc0: [MPSAFE]
ahc0: [ITHREAD]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xefffef80-0xefffefff irq 12 at device 11.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xefffef80
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:01:02:d9:b4:95
xl0: [MPSAFE]
xl0: [ITHREAD]
cpu0 on motherboard
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
pnpbios: 13 devices, largest 114 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xdc000-0xdffff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x1ffeffff, size=0x1fef0000
PNP0c01: adding fixed memory32 range 0x1fff0000-0x1fff7fff, size=0x8000
PNP0c01: adding fixed memory32 range 0x1fff8000-0x1fffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x4
PNP0501: adding irq mask 0x10
pnpbios: handle 8 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x4
PNP0501: adding irq mask 0x8
pnpbios: handle 9 device ID PNP0501 (0105d041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x4
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x4
PNP0401: adding irq mask 0x20
PNP0401: adding dma mask 0x8
pnpbios: handle 10 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x4
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 11 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0x5000-0x507f, size=0x80, align=0x1
PNP0a03: adding io range 0x5080-0x50ff, size=0x80, align=0x1
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0x1
pnpbios: handle 12 device ID PNP0a03 (030ad041)
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9fbff pnpid PNP0c01 on isa0
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
unknown: <AT Real Time Clock> failed to probe at port 0x61 pnpid PNP0800 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
uart1: [FILTER]
uart1: fast interrupt
ppc1: using extended I/O port range
ppc1: SPP ECP  ECP+EPP
ppc1: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 5 drq 3 pnpid PNP0401 on isa0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/9 bytes threshold
ppc1: [MPSAFE]
ppc1: [ITHREAD]
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
plip0: [MPSAFE]
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [MPSAFE]
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <AT Real Time Clock> failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xd3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: parallel port found at 0x378
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at port 0x378-0x37f irq 7 on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9fbff pnpid PNP0c01 on isa0
fdc: fdc-1 already exists; skipping it
driver bug: Unable to set devclass (devname: (null))
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 908958603 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0f6dfe0
usbus0: 12Mbps Full Speed USB v1.0
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting PIO4 on 756 chip
acd0: setting UDMA33 on 756 chip
ugen0.1: <AMD> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
acd0: <TSSTcorpDVD-ROM SH-D162D/SB04> DVDROM drive at ata0 as master
acd0: read 10820KB/s (10820KB/s), 198KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: DVD 120mm data disc
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
uhub0: 4 ports with 4 removable, self powered
ugen0.2: <vendor 0x0430> at usbus0
ums0: <vendor 0x0430 product 0x0100, class 0/0, rev 2.00/1.07, addr 2> on usbus0
ums0: 3 buttons and [XY] coordinates ID=0
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
(probe1:ahc0:0:1:0): Retrying Command
(probe4:ahc0:0:4:0): Retrying Command
(probe1:ahc0:0:1:0): Down reving Protocol Version from 4 to 3?
(ahc0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(probe4:ahc0:0:4:0): Down reving Protocol Version from 4 to 2?
(probe4:ahc0:0:4:0): Down reving Transport Version from 3 to 2?
(ahc0:A:1:0): Received PPR width 1, period 9, offset 7f,options 2
        Filtered to width 1, period 9, offset 7f, options 2
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f
(ahc0:A:4:0): Sending WDTR 1
(ahc0:A:4:0): Received WDTR 1 filtered to 1
ahc0: target 4 using 16bit transfers
(ahc0:A:4:0): Sending SDTR period c, offset 7f
(ahc0:A:4:0): Received SDTR period c, offset f
        Filtered to period c, offset f
ahc0: target 4 synchronous at 20.0MHz, offset = 0xf
pass0 at ahc0 bus 0 target 1 lun 0
pass0: <FUJITSU MAN3367MC 0208> Fixed Direct Access SCSI-3 device 
pass0: Serial Number UFF7P21003R6
pass0: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
pass0: Command Queueing enabled
pass1 at ahc0 bus 0 target 4 lun 0
pass1: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device 
pass1: Serial Number QDJW5598        
pass1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
pass1: Command Queueing enabled
da0 at ahc0 bus 0 target 1 lun 0
da0: <FUJITSU MAN3367MC 0208> Fixed Direct Access SCSI-3 device 
da0: Serial Number UFF7P21003R6
da0: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
da0: Command Queueing enabled
da0: 35044MB (71771688 512 byte sectors: 255H 63S/T 4467C)
GEOM: new disk da0
ATA PseudoRAID loaded
flowtable da1 at ahc0 bus 0 target 4 lun 0
da1: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device 
da1: Serial Number QDJW5598        
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da1: Command Queueing enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
cleaner started
GEOM: new disk da1
Trying to mount root from ufs:/dev/md0
ct_to_ts([2009-12-30 08:22:53]) = 1262161373.000000000
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
/stand/sysinstall running as init on serial console


--cWoXeonUoKmBZSoM--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091230082556.GD1637>