Date: Sat, 6 Oct 2012 06:29:41 GMT From: jb <jb.1234abcd@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: ports/172379: X11/Xorg errors: drmOpenDevice, /dev/dri/, /dev/dri/card0 Message-ID: <201210060629.q966Tfa1089524@red.freebsd.org> Resent-Message-ID: <201210060630.q966U9We081704@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 172379 >Category: ports >Synopsis: X11/Xorg errors: drmOpenDevice, /dev/dri/, /dev/dri/card0 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Oct 06 06:30:08 UTC 2012 >Closed-Date: >Last-Modified: >Originator: jb >Release: FreeBSD 9.1-RC1 #0 >Organization: >Environment: FreeBSD localhost.localdomain 9.1-RC1 FreeBSD 9.1-RC1 #0: Tue Aug 14 03:56:40 UTC 2012 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 >Description: No xorg.conf present. $ startx $ ls -al /dev/dri/ total 1 dr-xr-xr-x 2 root wheel 512 Oct 6 07:40 . dr-xr-xr-x 10 root wheel 512 Oct 6 09:33 .. crw-rw---- 1 root wheel 0, 133 Oct 6 07:40 card0 $ cat /var/log/Xorg.0.log X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 9.1-RC1 i386 Current Operating System: FreeBSD localhost.localdomain 9.1-RC1 FreeBSD 9.1-RC1 #0: Tue Aug 14 03:56:40 UTC 2012 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 Build Date: 03 October 2012 10:23:17PM Current version of pixman: 0.24.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 6 07:40:43 2012 (II) Loader magic: 0x81e1100 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) Using syscons driver with X support (version 2.0) (--) using VT number 5 (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) rev 12, Mem @ 0xf8100000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/65536 (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) rev 12, Mem @ 0xf8200000/1048576 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/ (==) ModulePath set to "/usr/local/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AutoAddDevices. (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.7.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (WW) Warning, couldn't open module fbdev (II) UnloadModule: "fbdev" (EE) Failed to load module "fbdev" (module does not exist, 0) (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for vesa (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xF8100000 (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "LEN", prod id 16464 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): EDID vendor "LEN", prod id 16464 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/local/lib/xorg/modules/libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.5.0 ABI class: X.Org Video Driver, version 6.0 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (II) UnloadModule: "vesa" (II) Unloading /usr/local/lib/xorg/modules/drivers/vesa_drv.so (==) Depth 24 pixmap format is 32 bpp (II) intel(0): Kernel reported 491520 total, 0 used (II) intel(0): I830CheckAvailableMemory: 1966080 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 Failed to change owner or group for file /dev/dri! 2: No such file or directory Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory drmOpenDevice: open result is -1, (No such file or directory) Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 Failed to change owner or group for file /dev/dri! 2: No such file or directory Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory drmOpenDevice: open result is -1, (No such file or directory) Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] loaded kernel module for "i915" driver. (II) [drm] DRM interface version 1.2 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0x10000000 (II) intel(0): [drm] ring buffer = 0x30000000 (II) intel(0): [drm] mapped front buffer at 0xe082b000, handle = 0x40000000 (II) intel(0): [drm] mapped back buffer at 0xe212c000, handle = 0x50000000 (II) intel(0): [drm] mapped depth buffer at 0xe276c000, handle = 0x60000000 (II) intel(0): [drm] mapped classic textures at 0xe2dac000, handle = 0x70000000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) EXA(0): Offscreen pixmap area of 19660800 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (WW) intel(0): drmDropMaster failed: Unknown error: -1 (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0082a000 (pgoffset 2090) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x0082b000 (pgoffset 2091) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x00e6b000 (pgoffset 3691) (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x0212b000 (pgoffset 8491) (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x0212c000 (pgoffset 8492) (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x0276c000 (pgoffset 10092) (II) intel(0): xf86BindGARTMemory: bind key 8 at 0x02dac000 (pgoffset 11692) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) (II) intel(0): 0x0082b000-0x00e6afff: front buffer (6400 kB) X tiled (II) intel(0): 0x00e6b000-0x0212afff: exa offscreen (19200 kB) (II) intel(0): 0x0212b000-0x0212bfff: power context (4 kB) (II) intel(0): 0x0212c000-0x0276bfff: back buffer (6400 kB) X tiled (II) intel(0): 0x0276c000-0x02dabfff: depth buffer (6400 kB) Y tiled (II) intel(0): 0x02dac000-0x04dabfff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): [drm] dma control initialized, using IRQ 259 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: XF86DRI Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) config/hal: Adding input device AT Keyboard (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.6.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) AT Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Option "XkbRules" "base" (**) Option "XkbModel" "pc105" (**) Option "XkbLayout" "us" (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) (II) config/hal: Adding input device PS/2 Mouse (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.7.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (WW) PS/2 Mouse: No Device specified, looking for one... (II) PS/2 Mouse: Setting Device option to "/dev/psm0" (--) PS/2 Mouse: Device: "/dev/psm0" (==) PS/2 Mouse: Protocol: "Auto" (**) PS/2 Mouse: always reports core events (**) Option "Device" "/dev/psm0" (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: Buttons: 9 (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Mouse: (accel) acceleration profile 0 (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 0 (II) PS/2 Mouse: SetupAuto: protocol is PS/2 (II) PS/2 Mouse: ps2EnableDataReporting: succeeded (II) intel(0): EDID vendor "LEN", prod id 16464 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (II) intel(0): EDID vendor "LEN", prod id 16464 $ >How-To-Repeat: as above >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201210060629.q966Tfa1089524>