Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Aug 2012 16:30:15 GMT
From:      Dominic Fandrey <kamikaze@bsdforen.de>
To:        freebsd-acpi@FreeBSD.org
Subject:   Re: kern/162859: [acpi] ACPI battery/acline monitoring partialy working (switching)
Message-ID:  <201208161630.q7GGUFRr066311@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/162859; it has been noted by GNATS.

From: Dominic Fandrey <kamikaze@bsdforen.de>
To: bug-followup@FreeBSD.org, msuszko@gmail.com
Cc:  
Subject: Re: kern/162859: [acpi] ACPI battery/acline monitoring partialy working
 (switching)
Date: Thu, 16 Aug 2012 18:21:02 +0200

 This is a multi-part message in MIME format.
 --------------030003070308000204020300
 Content-Type: text/plain; charset=ascii; format=flowed
 Content-Transfer-Encoding: 7bit
 
 I have this issue with my HP 6510b Core 2 Duo 2.4 GHz ICH8 system.
 
 Attached is a verbose boot dmesg and shutdown and a regular boot.
 
 I'm willing to provide dmidecode and pciconf output or run experimental
 kernel patches. Whatever is necessary to fix this.
 
 Regards
 
 -- 
 A: Because it fouls the order in which people normally read text.
 Q: Why is top-posting such a bad thing?
 A: Top-posting.
 Q: What is the most annoying thing on usenet and in e-mail?
 
 --------------030003070308000204020300
 Content-Type: text/plain; charset=UTF-8;
  name="dmesg.vorbose+shutdown+normal"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment;
  filename="dmesg.vorbose+shutdown+normal"
 
 sc: sc0 already exists; skipping it
 isa_probe_children: probing non-PnP devices
 orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
 uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
 wbwd0 failed to probe on isa0
 isa_probe_children: probing PnP devices
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 Device configuration finished.
 procfs registered
 Timecounters tick every 1.000 msec
 vlan: initialized, using hash tables with chaining
 Linux ELF exec handler installed
 lo0: bpf attached
 hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
 hdacc0: Root Node at nid=0: 1 subnodes 1-1
 hdaa0: <Analog Devices AD1981HD HDA CODEC Audio Function Group> at nid 1 on hdacc0
 hdaa0: Audio Function Group at nid=1: 30 subnodes 2-31
 hdaa0: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
 hdaa0:  GPIO0: disabled
 hdaa0:  GPIO1: disabled
 hdaa0:  GPIO2: disabled
 hdaa0:  GPIO3: disabled
 hdaa0: WARNING: nid=2 has cnid outside of the AFG range j=0 entnum=4 index=0 res=0x00000401
 hdaa0: Original pins configuration:
 hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
 hdaa0:  5 92174110 1  0  Speaker       Fixed Analog  0x12       Green   1
 hdaa0:  6 0321201f 1  15 Headphones    Jack  1/8     Left       Grey    0
 hdaa0:  7 410710f0 15 0  Line-out      None  Analog  Rear       Black   0
 hdaa0:  8 03a12020 2  0  Mic           Jack  1/8     Left       Grey    0
 hdaa0:  9 0181302e 2  14 Line-in       Jack  1/8     Rear       Blue    0
 hdaa0: 10 4145f0f0 15 0  SPDIF-out     None  Optical Rear       Other   0
 hdaa0: 22 995711f0 15 0  Digital-out   Fixed Analog  Onboard    Black   1
 hdaa0: 23 5993e0f0 15 0  AUX           None  ATAPI   Onboard    White   0
 hdaa0: 24 91a79121 2  1  Mic           Fixed Analog  0x11       Pink    1
 hdaa0: 25 593310f0 15 0  CD            None  ATAPI   Onboard    Black   0
 hdaa0: Patched pins configuration:
 hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
 hdaa0:  5 92174110 1  0  Speaker       Fixed Analog  0x12       Green   1
 hdaa0:  6 0321201f 1  15 Headphones    Jack  1/8     Left       Grey    0
 hdaa0:  7 410710f0 15 0  Line-out      None  Analog  Rear       Black   0 DISA
 hdaa0:  8 03a12020 2  0  Mic           Jack  1/8     Left       Grey    0
 hdaa0:  9 0181302e 2  14 Line-in       Jack  1/8     Rear       Blue    0
 hdaa0: 10 4145f0f0 15 0  SPDIF-out     None  Optical Rear       Other   0 DISA
 hdaa0: 22 995711f0 15 0  Digital-out   Fixed Analog  Onboard    Black   1
 hdaa0: 23 5993e0f0 15 0  AUX           None  ATAPI   Onboard    White   0 DISA
 hdaa0: 24 91a79121 2  1  Mic           Fixed Analog  0x11       Pink    1
 hdaa0: 25 593310f0 15 0  CD            None  ATAPI   Onboard    Black   0 DISA
 hdaa0: 3 associations found:
 hdaa0: Association 0 (1) out:
 hdaa0:  Pin nid=5 seq=0
 hdaa0:  Pin nid=6 seq=15
 hdaa0: Association 1 (2) in:
 hdaa0:  Pin nid=8 seq=0
 hdaa0:  Pin nid=24 seq=1
 hdaa0:  Pin nid=9 seq=14
 hdaa0: Association 2 (15) out:
 hdaa0:  Pin nid=22 seq=0
 hdaa0: Tracing association 0 (1)
 hdaa0:  Pin 5 traced to DAC 3
 hdaa0:  Pin 6 traced to DAC 3 and hpredir 0
 hdaa0: Association 0 (1) trace succeeded
 hdaa0: Tracing association 1 (2)
 hdaa0:  Pin 8 traced to ADC 4
 hdaa0:  Pin 24 traced to ADC 4
 hdaa0:  Pin 9 traced to ADC 4
 hdaa0: Association 1 (2) trace succeeded
 hdaa0: Tracing association 2 (15)
 hdaa0:  Unable to trace pin 22 seq 0 with min nid 0
 hdaa0: Association 2 (15) trace failed
 hdaa0: Looking for additional DAC for association 0 (1)
 hdaa0: Looking for additional ADC for association 1 (2)
 hdaa0: Tracing input monitor
 hdaa0:  Tracing nid 12 to out
 hdaa0: Tracing other input monitors
 hdaa0:  Tracing nid 8 to out
 hdaa0:  nid 8 is input monitor
 hdaa0:  Tracing nid 9 to out
 hdaa0:  nid 9 is input monitor
 hdaa0:  Tracing nid 24 to out
 hdaa0:  nid 24 is input monitor
 hdaa0: Tracing beeper
 hdaa0:  nid 16 traced to out
 hdaa0: Headphones redirection for association 0 nid=6 using unsolicited responses.
 hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
 hdaa0: 
 hdaa0: +-------------------+
 hdaa0: | DUMPING HDA NODES |
 hdaa0: +-------------------+
 hdaa0: 
 hdaa0: Default Parameter
 hdaa0: -----------------
 hdaa0:      Stream cap: 0x00000001
 hdaa0:                  PCM
 hdaa0:         PCM cap: 0x000e007f
 hdaa0:                  16 20 24 bits, 8 11 16 22 32 44 48 KHz
 hdaa0:          IN amp: 0x00270300
 hdaa0:         OUT amp: 0x80053f3d
 hdaa0: 
 hdaa0:             nid: 2 [DISABLED]
 hdaa0:            Name: audio output
 hdaa0:      Widget cap: 0x00030311
 hdaa0:                  DIGITAL STEREO
 hdaa0:      Stream cap: 0x00000005
 hdaa0:                  AC3 PCM
 hdaa0:         PCM cap: 0x00020060
 hdaa0:                  16 bits, 44 48 KHz
 hdaa0:     connections: 2
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected)
 hdaa0:           + <- nid=4 [audio input]
 hdaa0: 
 hdaa0:             nid: 3
 hdaa0:            Name: audio output
 hdaa0:      Widget cap: 0x00000441
 hdaa0:                  PWR PROC STEREO
 hdaa0:     Association: 0 (0x00008001)
 hdaa0:             OSS: pcm (pcm)
 hdaa0:      Stream cap: 0x00000001
 hdaa0:                  PCM
 hdaa0:         PCM cap: 0x000e007f
 hdaa0:                  16 20 24 bits, 8 11 16 22 32 44 48 KHz
 hdaa0: 
 hdaa0:             nid: 4
 hdaa0:            Name: audio input
 hdaa0:      Widget cap: 0x00100511
 hdaa0:                  PWR STEREO
 hdaa0:     Association: 1 (0x00004003)
 hdaa0:      Stream cap: 0x00000001
 hdaa0:                  PCM
 hdaa0:         PCM cap: 0x0006007f
 hdaa0:                  16 20 bits, 8 11 16 22 32 44 48 KHz
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=21 [audio selector]
 hdaa0: 
 hdaa0:             nid: 5
 hdaa0:            Name: pin: Speaker (Fixed)
 hdaa0:      Widget cap: 0x00400187
 hdaa0:                  UNSOL STEREO
 hdaa0:     Association: 0 (0x00000001)
 hdaa0:         Pin cap: 0x0001173f
 hdaa0:                  ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ] EAPD
 hdaa0:      Pin config: 0x92174110
 hdaa0:     Pin control: 0x00000040 OUT
 hdaa0:            EAPD: 0x00000002
 hdaa0:      Output amp: 0x80053f3d
 hdaa0:                  mute=1 step=63 size=5 offset=61
 hdaa0:       Input amp: 0x00270300
 hdaa0:                  mute=0 step=3 size=39 offset=0
 hdaa0:     connections: 2
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=3 [audio output]
 hdaa0:           + <- nid=14 [audio mixer] (selected)
 hdaa0: 
 hdaa0:             nid: 6
 hdaa0:            Name: pin: Headphones (Grey Jack)
 hdaa0:      Widget cap: 0x00400185
 hdaa0:                  UNSOL STEREO
 hdaa0:     Association: 0 (0x00008000)
 hdaa0:         Pin cap: 0x0000001f
 hdaa0:                  ISC TRQD PDC HP OUT
 hdaa0:      Pin config: 0x0321201f
 hdaa0:     Pin control: 0x000000c0 HP OUT
 hdaa0:      Output amp: 0x80053f3d
 hdaa0:                  mute=1 step=63 size=5 offset=61
 hdaa0:     connections: 2
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=3 [audio output]
 hdaa0:           + <- nid=14 [audio mixer] (selected)
 hdaa0: 
 hdaa0:             nid: 7 [DISABLED]
 hdaa0:            Name: pin: Line-out (None)
 hdaa0:      Widget cap: 0x00400104
 hdaa0:         Pin cap: 0x00000010
 hdaa0:                  OUT
 hdaa0:      Pin config: 0x410710f0
 hdaa0:     Pin control: 0x00000000
 hdaa0:      Output amp: 0x80053f3d
 hdaa0:                  mute=1 step=63 size=5 offset=61
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 8
 hdaa0:            Name: pin: Mic (Grey Jack)
 hdaa0:      Widget cap: 0x00400083
 hdaa0:                  UNSOL STEREO
 hdaa0:     Association: 1 (0x00000001)
 hdaa0:             OSS: mic (mic)
 hdaa0:         Pin cap: 0x00001727
 hdaa0:                  ISC TRQD PDC IN VREF[ 50 80 GROUND HIZ ]
 hdaa0:      Pin config: 0x03a12020
 hdaa0:     Pin control: 0x00000024 IN VREFs
 hdaa0:       Input amp: 0x00270300
 hdaa0:                  mute=0 step=3 size=39 offset=0
 hdaa0: 
 hdaa0:             nid: 9
 hdaa0:            Name: pin: Line-in (Blue Jack)
 hdaa0:      Widget cap: 0x00400187
 hdaa0:                  UNSOL STEREO
 hdaa0:     Association: 1 (0x00004000)
 hdaa0:             OSS: line (line)
 hdaa0:         Pin cap: 0x00001737
 hdaa0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
 hdaa0:      Pin config: 0x0181302e
 hdaa0:     Pin control: 0x00000024 IN VREFs
 hdaa0:      Output amp: 0x80053f3d
 hdaa0:                  mute=1 step=63 size=5 offset=61
 hdaa0:       Input amp: 0x00270300
 hdaa0:                  mute=0 step=3 size=39 offset=0
 hdaa0:     connections: 2
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=3 [audio output] (selected)
 hdaa0:           + [DISABLED] <- nid=14 [audio mixer]
 hdaa0: 
 hdaa0:             nid: 10 [DISABLED]
 hdaa0:            Name: pin: SPDIF-out (None)
 hdaa0:      Widget cap: 0x00400301
 hdaa0:                  DIGITAL STEREO
 hdaa0:         Pin cap: 0x00000010
 hdaa0:                  OUT
 hdaa0:      Pin config: 0x4145f0f0
 hdaa0:     Pin control: 0x00000000
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=2 [audio output] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 11 [DISABLED]
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x00300101
 hdaa0:                  STEREO
 hdaa0:     connections: 6
 hdaa0:           |
 hdaa0:           + <- nid=3 [audio output] (selected)
 hdaa0:           + <- nid=12 [audio mixer]
 hdaa0:           + <- nid=9 [pin: Line-in (Blue Jack)]
 hdaa0:           + <- nid=14 [audio mixer]
 hdaa0:           + <- nid=5 [pin: Speaker (Fixed)]
 hdaa0:           + <- nid=24 [pin: Mic (Fixed)]
 hdaa0: 
 hdaa0:             nid: 12
 hdaa0:            Name: audio mixer
 hdaa0:      Widget cap: 0x00200101
 hdaa0:                  STEREO
 hdaa0:     Association: 1 (0x00000001)
 hdaa0:             OSS: mic
 hdaa0:     connections: 2
 hdaa0:           |
 hdaa0:           + <- nid=30 [audio selector]
 hdaa0:           + [DISABLED] <- nid=31 [audio selector] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 13
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010c
 hdaa0:     Association: -2 (0x00000000)
 hdaa0:             OSS: speaker
 hdaa0:      Output amp: 0x800b0f0f
 hdaa0:                  mute=1 step=15 size=11 offset=15
 hdaa0:     connections: 2
 hdaa0:           |
 hdaa0:           + <- nid=16 [beep widget] (selected)
 hdaa0:           + [DISABLED] <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 14
 hdaa0:            Name: audio mixer
 hdaa0:      Widget cap: 0x00200101
 hdaa0:                  STEREO
 hdaa0:     Association: 0 (0x00008001)
 hdaa0:             OSS: pcm, speaker, line, mic, monitor
 hdaa0:     connections: 8
 hdaa0:           |
 hdaa0:           + <- nid=13 [audio selector]
 hdaa0:           + <- nid=17 [audio selector]
 hdaa0:           + <- nid=18 [audio selector]
 hdaa0:           + <- nid=19 [audio selector]
 hdaa0:           + [DISABLED] <- nid=26 [audio selector] [DISABLED]
 hdaa0:           + [DISABLED] <- nid=27 [audio selector] [DISABLED]
 hdaa0:           + <- nid=28 [audio selector]
 hdaa0:           + [DISABLED] <- nid=29 [audio selector] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 15 [DISABLED]
 hdaa0:            Name: audio mixer
 hdaa0:      Widget cap: 0x00200100
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=11 [audio selector] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 16
 hdaa0:            Name: beep widget
 hdaa0:      Widget cap: 0x00700000
 hdaa0:     Association: -2 (0x00000000)
 hdaa0:             OSS: speaker (speaker)
 hdaa0: 
 hdaa0:             nid: 17
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:     Association: 0 (0x00008001)
 hdaa0:             OSS: pcm
 hdaa0:      Output amp: 0x80051f17
 hdaa0:                  mute=1 step=31 size=5 offset=23
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=3 [audio output]
 hdaa0: 
 hdaa0:             nid: 18
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:     Association: -2 (0x00000000)
 hdaa0:             OSS: mic
 hdaa0:      Output amp: 0x80051f17
 hdaa0:                  mute=1 step=31 size=5 offset=23
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=8 [pin: Mic (Grey Jack)]
 hdaa0: 
 hdaa0:             nid: 19
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:     Association: -2 (0x00000000)
 hdaa0:             OSS: line
 hdaa0:      Output amp: 0x80051f17
 hdaa0:                  mute=1 step=31 size=5 offset=23
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=9 [pin: Line-in (Blue Jack)]
 hdaa0: 
 hdaa0:             nid: 20 [DISABLED]
 hdaa0:            Name: power widget
 hdaa0:      Widget cap: 0x00500500
 hdaa0:                  PWR
 hdaa0:     connections: 13
 hdaa0:           |
 hdaa0:           + <- nid=13 [audio selector] (selected)
 hdaa0:           + <- nid=14 [audio mixer]
 hdaa0:           + <- nid=15 [audio mixer] [DISABLED]
 hdaa0:           + <- nid=16 [beep widget]
 hdaa0:           + <- nid=19 [audio selector]
 hdaa0:           + <- nid=20 [power widget] [DISABLED]
 hdaa0:           + <- nid=21 [audio selector]
 hdaa0:           + <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
 hdaa0:           + <- nid=23 [pin: AUX (None)] [DISABLED]
 hdaa0:           + <- nid=24 [pin: Mic (Fixed)]
 hdaa0:           + <- nid=25 [pin: CD (None)] [DISABLED]
 hdaa0:           + <- nid=26 [audio selector] [DISABLED]
 hdaa0:           + <- nid=29 [audio selector] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 21
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:     Association: 1 (0x00004003)
 hdaa0:             OSS: line, mic, monitor
 hdaa0:      Output amp: 0x80050f00
 hdaa0:                  mute=1 step=15 size=5 offset=0
 hdaa0:     connections: 8
 hdaa0:           |
 hdaa0:           + <- nid=12 [audio mixer]
 hdaa0:           + <- nid=9 [pin: Line-in (Blue Jack)] (selected)
 hdaa0:           + [DISABLED] <- nid=14 [audio mixer]
 hdaa0:           + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
 hdaa0:           + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
 hdaa0:           + [DISABLED] <- nid=5 [pin: Speaker (Fixed)]
 hdaa0:           + <- nid=24 [pin: Mic (Fixed)]
 hdaa0:           + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 22 [DISABLED]
 hdaa0:            Name: pin: Digital-out (Fixed)
 hdaa0:      Widget cap: 0x00400000
 hdaa0:         Pin cap: 0x00000020
 hdaa0:                  IN
 hdaa0:      Pin config: 0x995711f0
 hdaa0:     Pin control: 0x00000000
 hdaa0: 
 hdaa0:             nid: 23 [DISABLED]
 hdaa0:            Name: pin: AUX (None)
 hdaa0:      Widget cap: 0x00400081
 hdaa0:                  UNSOL STEREO
 hdaa0:         Pin cap: 0x00000027
 hdaa0:                  ISC TRQD PDC IN
 hdaa0:      Pin config: 0x5993e0f0
 hdaa0:     Pin control: 0x00000000
 hdaa0: 
 hdaa0:             nid: 24
 hdaa0:            Name: pin: Mic (Fixed)
 hdaa0:      Widget cap: 0x00400187
 hdaa0:                  UNSOL STEREO
 hdaa0:     Association: 1 (0x00000002)
 hdaa0:             OSS: monitor (monitor)
 hdaa0:         Pin cap: 0x00001737
 hdaa0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
 hdaa0:      Pin config: 0x91a79121
 hdaa0:     Pin control: 0x00000024 IN VREFs
 hdaa0:      Output amp: 0x80053f3d
 hdaa0:                  mute=1 step=63 size=5 offset=61
 hdaa0:       Input amp: 0x00270300
 hdaa0:                  mute=0 step=3 size=39 offset=0
 hdaa0:     connections: 2
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=3 [audio output] (selected)
 hdaa0:           + [DISABLED] <- nid=14 [audio mixer]
 hdaa0: 
 hdaa0:             nid: 25 [DISABLED]
 hdaa0:            Name: pin: CD (None)
 hdaa0:      Widget cap: 0x00400001
 hdaa0:                  STEREO
 hdaa0:         Pin cap: 0x00000020
 hdaa0:                  IN
 hdaa0:      Pin config: 0x593310f0
 hdaa0:     Pin control: 0x00000000
 hdaa0: 
 hdaa0:             nid: 26 [DISABLED]
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:      Output amp: 0x80051f17
 hdaa0:                  mute=1 step=31 size=5 offset=23
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=5 [pin: Speaker (Fixed)]
 hdaa0: 
 hdaa0:             nid: 27 [DISABLED]
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:      Output amp: 0x80051f17
 hdaa0:                  mute=1 step=31 size=5 offset=23
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 28
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:     Association: -2 (0x00000000)
 hdaa0:             OSS: monitor
 hdaa0:      Output amp: 0x80051f17
 hdaa0:                  mute=1 step=31 size=5 offset=23
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=24 [pin: Mic (Fixed)]
 hdaa0: 
 hdaa0:             nid: 29 [DISABLED]
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:      Output amp: 0x80051f17
 hdaa0:                  mute=1 step=31 size=5 offset=23
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
 hdaa0: 
 hdaa0:             nid: 30
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:     Association: 1 (0x00000001)
 hdaa0:             OSS: mic
 hdaa0:      Output amp: 0x80000000
 hdaa0:                  mute=1 step=0 size=0 offset=0
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=8 [pin: Mic (Grey Jack)]
 hdaa0: 
 hdaa0:             nid: 31 [DISABLED]
 hdaa0:            Name: audio selector
 hdaa0:      Widget cap: 0x0030010d
 hdaa0:                  STEREO
 hdaa0:      Output amp: 0x80000000
 hdaa0:                  mute=1 step=0 size=0 offset=0
 hdaa0:     connections: 1
 hdaa0:           |
 hdaa0:           + <- nid=24 [pin: Mic (Fixed)]
 hdaa0: 
 pcm0: <Analog Devices AD1981HD HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 5,6 and 8,24,9 on hdaa0
 pcm0: +--------------------------------------+
 pcm0: | DUMPING PCM Playback/Record Channels |
 pcm0: +--------------------------------------+
 pcm0: 
 pcm0: Playback:
 pcm0: 
 pcm0:      Stream cap: 0x00000001
 pcm0:                  PCM
 pcm0:         PCM cap: 0x000e007f
 pcm0:                  16 20 24 bits, 8 11 16 22 32 44 48 KHz
 pcm0:             DAC: 3
 pcm0: 
 pcm0: Record:
 pcm0: 
 pcm0:      Stream cap: 0x00000001
 pcm0:                  PCM
 pcm0:         PCM cap: 0x0006007f
 pcm0:                  16 20 bits, 8 11 16 22 32 44 48 KHz
 pcm0:             DAC: 4
 pcm0: 
 pcm0: +-------------------------------+
 pcm0: | DUMPING Playback/Record Paths |
 pcm0: +-------------------------------+
 pcm0: 
 pcm0: Playback:
 pcm0: 
 pcm0:     nid=5 [pin: Speaker (Fixed)]
 pcm0:       |
 pcm0:       + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic, monitor]
 pcm0:              |
 pcm0:              + <- nid=13 [audio selector] [src: speaker]
 pcm0:                     |
 pcm0:                     + <- nid=16 [beep widget] [src: speaker]
 pcm0:              + <- nid=17 [audio selector] [src: pcm]
 pcm0:                     |
 pcm0:                     + <- nid=3 [audio output] [src: pcm]
 pcm0:              + <- nid=18 [audio selector] [src: mic]
 pcm0:                     |
 pcm0:                     + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
 pcm0:              + <- nid=19 [audio selector] [src: line]
 pcm0:                     |
 pcm0:                     + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
 pcm0:              + <- nid=28 [audio selector] [src: monitor]
 pcm0:                     |
 pcm0:                     + <- nid=24 [pin: Mic (Fixed)] [src: monitor]
 pcm0: 
 pcm0:     nid=6 [pin: Headphones (Grey Jack)]
 pcm0:       |
 pcm0:       + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic, monitor]
 pcm0:              |
 pcm0:              + <- nid=13 [audio selector] [src: speaker]
 pcm0:                     |
 pcm0:                     + <- nid=16 [beep widget] [src: speaker]
 pcm0:              + <- nid=17 [audio selector] [src: pcm]
 pcm0:                     |
 pcm0:                     + <- nid=3 [audio output] [src: pcm]
 pcm0:              + <- nid=18 [audio selector] [src: mic]
 pcm0:                     |
 pcm0:                     + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
 pcm0:              + <- nid=19 [audio selector] [src: line]
 pcm0:                     |
 pcm0:                     + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
 pcm0:              + <- nid=28 [audio selector] [src: monitor]
 pcm0:                     |
 pcm0:                     + <- nid=24 [pin: Mic (Fixed)] [src: monitor]
 pcm0: 
 pcm0: Record:
 pcm0: 
 pcm0:     nid=4 [audio input]
 pcm0:       |
 pcm0:       + <- nid=21 [audio selector] [src: line, mic, monitor]
 pcm0:              |
 pcm0:              + <- nid=12 [audio mixer] [src: mic]
 pcm0:                     |
 pcm0:                     + <- nid=30 [audio selector] [src: mic]
 pcm0:                            |
 pcm0:                            + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
 pcm0:              + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
 pcm0:              + <- nid=24 [pin: Mic (Fixed)] [src: monitor]
 pcm0: 
 pcm0: +-------------------------+
 pcm0: | DUMPING Volume Controls |
 pcm0: +-------------------------+
 pcm0: 
 pcm0: Master Volume (OSS: vol): -91/3dB
 pcm0:    |
 pcm0:    +- ctl  1 (nid   5 in ):    -91/3dB (64 steps) + mute
 pcm0:    +- ctl  3 (nid   6 in ):    -91/3dB (64 steps) + mute
 pcm0:    +- ctl  8 (nid  13 out):    -45/0dB (16 steps) + mute
 pcm0:    +- ctl  9 (nid  17 out):    -34/12dB (32 steps) + mute
 pcm0:    +- ctl 10 (nid  18 out):    -34/12dB (32 steps) + mute
 pcm0:    +- ctl 11 (nid  19 out):    -34/12dB (32 steps) + mute
 pcm0:    +- ctl 17 (nid  28 out):    -34/12dB (32 steps) + mute
 pcm0: 
 pcm0: PCM Volume (OSS: pcm): -34/12dB
 pcm0:    |
 pcm0:    +- ctl  9 (nid  17 out):    -34/12dB (32 steps) + mute
 pcm0: 
 pcm0: Microphone Volume (OSS: mic): 0/30dB
 pcm0:    |
 pcm0:    +- ctl  5 (nid   8 out):    0/30dB (4 steps)
 pcm0:    +- ctl 10 (nid  18 out):    -34/12dB (32 steps) + mute
 pcm0:    +- ctl 12 (nid  21 out):    0/22dB (16 steps) + mute
 pcm0:    +- ctl 19 (nid  30 out):    mute
 pcm0: 
 pcm0: Microphone2 Volume (OSS: monitor): 0/30dB
 pcm0:    |
 pcm0:    +- ctl 12 (nid  21 out):    0/22dB (16 steps) + mute
 pcm0:    +- ctl 14 (nid  24 out):    0/30dB (4 steps)
 pcm0:    +- ctl 17 (nid  28 out):    -34/12dB (32 steps) + mute
 pcm0: 
 pcm0: Line-in Volume (OSS: line): 0/30dB
 pcm0:    |
 pcm0:    +- ctl  7 (nid   9 out):    0/30dB (4 steps)
 pcm0:    +- ctl 11 (nid  19 out):    -34/12dB (32 steps) + mute
 pcm0:    +- ctl 12 (nid  21 out):    0/22dB (16 steps) + mute
 pcm0: 
 pcm0: Speaker/Beep Volume (OSS: speaker): -45/0dB
 pcm0:    |
 pcm0:    +- ctl  8 (nid  13 out):    -45/0dB (16 steps) + mute
 pcm0: 
 pcm0: Recording Level (OSS: rec): 0/22dB
 pcm0:    |
 pcm0:    +- ctl 12 (nid  21 out):    0/22dB (16 steps) + mute
 pcm0:    +- ctl 19 (nid  30 out):    mute
 pcm0: 
 pcm0: Input Monitoring Level (OSS: igain): -34/0dB
 pcm0:    |
 pcm0:    +- ctl  8 (nid  13 out):    -45/0dB (16 steps) + mute
 pcm0:    +- ctl 10 (nid  18 out):    -34/12dB (32 steps) + mute
 pcm0:    +- ctl 11 (nid  19 out):    -34/12dB (32 steps) + mute
 pcm0:    +- ctl 17 (nid  28 out):    -34/12dB (32 steps) + mute
 pcm0: 
 pcm0: Mixer "vol":
 pcm0: Mixer "bass":
 pcm0: Mixer "treble":
 pcm0: Mixer "pcm":
 pcm0: Mixer "speaker":
 pcm0: Mixer "line":
 pcm0: Mixer "mic":
 pcm0: Mixer "rec":
 pcm0: Mixer "igain":
 pcm0: Mixer "ogain":
 pcm0: Mixer "monitor":
 pcm0: EQ Treble/Bass ENABLED
 pcm0: clone manager: deadline=750ms flags=0x8000001e
 pcm0: sndbuf_setmap 4780000, 10000; 0xffffff8232cc3000 -> 4780000
 pcm0: sndbuf_setmap 47c0000, 10000; 0xffffff8232d03000 -> 47c0000
 pcm0: Automatically set rec source to: monitor
 hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
 hdacc1: Root Node at nid=0: 1 subnodes 1-1
 unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached)
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 480Mbps High Speed USB v2.0
 usbus3: 12Mbps Full Speed USB v1.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 480Mbps High Speed USB v2.0
 ata0: reset tp1 mask=03 ostat0=50 ostat1=01
 ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
 ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
 ata0: reset tp2 stat0=10 stat1=01 devices=0x10000
 (aprobe0:ata0:0:0:0): SIGNATURE: eb14
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen5.1: <Intel> at usbus5
 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen6.1: <Intel> at usbus6
 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 ahcich0: AHCI reset...
 ahcich0: SATA connect time=100us status=00000123
 ahcich0: AHCI reset: device found
 GEOM_SCHED: Loading: mp = 0xffffffff80e77fe0, g_sched_class = 0xffffffff80e77fe0.
 battery0: battery initialization start
 ahcich0: AHCI reset: device ready after 100ms
 (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
 battery1: battery initialization start
 acpi_acad0: acline initialization start
 pass0 at ata0 bus 0 scbus0 target 0 lun 0
 pass0: <Optiarc DVD RW AD-7560A DH10> Removable CD-ROM SCSI-0 device 
 pass0: Serial Number 30647840 1125620Q111
 pass0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
 pass1 at ahcich0 bus 0 scbus1 target 0 lun 0
 pass1: <ST9500420ASG 0002SDM1> ATA-8 SATA 2.x device
 pass1: Serial Number 5VJ98VET
 pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 pass1: Command Queueing enabled
 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
 GEOM: new disk ada0
 ada0: <ST9500420ASG 0002SDM1> ATA-8 SATA 2.x device
 ada0: Serial Number 5VJ98VET
 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 ada0: Command Queueing enabled
 ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
 ada0: Previously was known as ad4
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 cd0 at ata0 bus 0 scbus0 target 0 lun 0
 cd0: <Optiarc DVD RW AD-7560A DH10> Removable CD-ROM SCSI-0 device 
 cd0: Serial Number 30647840 1125620Q111
 cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
 cd0: cd present [2356480 x 2048 byte records]
 SMP: AP CPU #1 Launched!
 cpu1 AP:
      ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
   timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400
 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49
 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 50
 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 51
 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 52
 msi: Assigning MSI IRQ 257 to local APIC 1 vector 53
 TSC timecounter disabled: C3 enabled.
 Timecounter "TSC" frequency 2394049476 Hz quality -1000
 acpi_tz3: switched from NONE to _AC3: 50.0C
 acpi_acad0: On Line
 acpi_acad0: acline initialization done, tried 1 times
 battery0: battery initialization done, tried 1 times
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 pcib5: allocated memory range (0xe4210000-0xe4210fff) for rid 0 of pccard0
 pccard0: CIS version PCCARD 2.0 or 2.1
 pccard0: CIS info: VECTOR, CANcardXL, 
 pccard0: Manufacturer code 0x2e6, product 0x100
 pccard0: function 0: unspecified, ccr addr 0x1f0 mask 0x3
 pccard0: function 0, config table entry 1: I/O card; irq mask 0xfffc; memspace 0-0x1fff; mwait_required rdybsy_active irqshare irqlevel
 pccard0: <unknown card> (manufacturer=0x02e6, product=0x0100, function_type=-1) at function 0
 pccard0:    CIS info: VECTOR, CANcardXL, 
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub3: 2 ports with 2 removable, self powered
 uhub4: 2 ports with 2 removable, self powered
 uhub5: 2 ports with 2 removable, self powered
 GEOM: new disk cd0
 uhub2: 4 ports with 4 removable, self powered
 Root mount waiting for: usbus6
 uhub6: 6 ports with 6 removable, self powered
 Trying to mount root from ufs:/dev/ufs/5root []...
 start_init: trying /sbin/init
 ugen4.2: <Razer> at usbus4
 ums0: <Razer Razer Lachesis, class 0/0, rev 1.10/21.00, addr 2> on usbus4
 ums0: 7 buttons and [XYZ] coordinates ID=0
 ukbd0: <Razer Razer Lachesis, class 0/0, rev 1.10/21.00, addr 2> on usbus4
 kbd2 at ukbd0
 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
 vboxdrv: fAsync=0 offMin=0x2f4 offMax=0x10d4
 wlan0: bpf attached
 wlan0: bpf attached
 wlan0: Ethernet address: 00:1c:bf:58:3a:87
 bge0: Disabling fastboot
 bge0: Disabling fastboot
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 GEOM_SCHED: Device ada0s2.sched. created.
 fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
 cd9660: Joliet Extension (Level 1)
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 KLD linux_adobe.ko: depends on kernel - not available or version mismatch
 linker_load_file: Unsupported file type
 pcib5: allocated memory range (0xe4210000-0xe4210fff) for rid 0 of pccard0
 drm0: <Intel i965GM> on vgapci0
 vgapci0: attempting to allocate 1 MSI vectors (1 supported)
 msi: routing MSI IRQ 259 to local APIC 1 vector 54
 vgapci0: using IRQ 259 for MSI
 info: [drm] MSI enabled 1 message(s)
 info: [drm] AGP at 0xd0000000 256MB
 info: [drm] Initialized i915 1.6.0 20080730
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 67.0 >= setpoint 35.0
 acpi_tz3: _AC2: temperature 67.0 >= setpoint 66.0
 acpi_tz3: switched from _AC3 to _AC2: 67.0C
 acpi_tz3: _AC4: temperature 67.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 67.0 >= setpoint 50.0
 acpi_tz3: _AC4: temperature 67.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 67.0 >= setpoint 50.0
 acpi_tz3: _AC4: temperature 67.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 67.0 >= setpoint 50.0
 battery1: battery initialization failed, giving up
 acpi_tz3: _AC4: temperature 67.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 67.0 >= setpoint 50.0
 acpi_tz3: _AC4: temperature 67.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 67.0 >= setpoint 50.0
 acpi_tz3: _AC4: temperature 67.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 67.0 >= setpoint 50.0
 acpi_tz3: _AC4: temperature 74.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 74.0 >= setpoint 50.0
 acpi_tz3: _AC1: temperature 74.0 >= setpoint 74.0
 acpi_tz3: switched from _AC2 to _AC1: 74.0C
 acpi_tz3: _AC4: temperature 74.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 74.0 >= setpoint 50.0
 acpi_tz3: _AC2: temperature 74.0 >= setpoint 66.0
 acpi_tz3: _AC4: temperature 74.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 74.0 >= setpoint 50.0
 acpi_tz3: _AC2: temperature 74.0 >= setpoint 66.0
 acpi_tz3: _AC4: temperature 74.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 74.0 >= setpoint 50.0
 acpi_tz3: _AC2: temperature 74.0 >= setpoint 66.0
 acpi_tz3: _AC4: temperature 74.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 74.0 >= setpoint 50.0
 acpi_tz3: _AC2: temperature 74.0 >= setpoint 66.0
 acpi_tz3: _AC4: temperature 74.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 74.0 >= setpoint 50.0
 acpi_tz3: _AC2: temperature 74.0 >= setpoint 66.0
 wpi0: need multicast update callback
 ifa_del_loopback_route: deletion failed
 ifa_add_loopback_route: insertion failed
 acpi_tz3: _AC4: temperature 74.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 74.0 >= setpoint 50.0
 acpi_tz3: _AC2: temperature 74.0 >= setpoint 66.0
 acpi_tz3: _AC4: temperature 69.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 69.0 >= setpoint 50.0
 acpi_tz3: _AC2: temperature 69.0 >= setpoint 66.0
 acpi_tz3: switched from _AC1 to _AC2: 69.0C
 acpi_tz3: _AC4: temperature 69.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 69.0 >= setpoint 50.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC3: temperature 61.0 >= setpoint 50.0
 acpi_tz3: switched from _AC2 to _AC3: 61.0C
 system power profile changed to 'economy'
 acpi_acad0: Off Line
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 wlan0: link state changed to UP
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 wlan0: link state changed to DOWN
 wpi0: scan timeout
 wpi0: need multicast update callback
 wpi0: need multicast update callback
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 wpi0: need multicast update callback
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 61.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 wlan0: link state changed to UP
 wpi0: need multicast update callback
 wpi0: need multicast update callback
 wpi0: need multicast update callback
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 45.0 >= setpoint 35.0
 acpi_tz3: switched from _AC3 to _AC4: 45.0C
 acpi_tz3: _AC3: temperature 50.0 >= setpoint 50.0
 acpi_tz3: switched from _AC4 to _AC3: 50.0C
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 wlan0: link state changed to DOWN
 wpi0: need multicast update callback
 Waiting (max 60 seconds) for system process `vnlru' to stop...done
 Waiting (max 60 seconds) for system process `bufdaemon' to stop...ACPI Error: [PWRS] Namespace lookup failure, AE_ALREADY_EXISTS (20110527/dswload2-327)
 ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20110527/psloop-254)
 ACPI Error: Method parse/execution failed [\\_PR_.CPU0._CST] (Node 0xfffffe0005380200), AE_ALREADY_EXISTS (20110527/psparse-560)
 ACPI Error: Method parse/execution failed [\\_PR_.CPU1._CST] (Node 0xfffffe0005381000), AE_ALREADY_EXISTS (20110527/psparse-560)
 ACPI: Marking method _CST as Serialized because of AE_ALREADY_EXISTS error
 ACPI: Marking method _CST as Serialized because of AE_ALREADY_EXISTS error
 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 system power profile changed to 'performance'
 acpi_acad0: On Line
 done
 
 Waiting (max 60 seconds) for system process `syncer' to stop...Syncing disks, vnodes remaining...6 6 6 6 3 3 3 2 3 3 3 acpi_tz3: _AC4: temperature 50.0 >= setpoint 35.0
 2 0 0 0 0 done
 All buffers synced.
 Swap device label/5swap removed.
 Uptime: 12m2s
 usbus0: Controller shutdown
 uhub0: at usbus0, port 1, addr 1 (disconnected)
 usbus0: Controller shutdown complete
 usbus1: Controller shutdown
 uhub1: at usbus1, port 1, addr 1 (disconnected)
 usbus1: Controller shutdown complete
 usbus2: Controller shutdown
 uhub2: at usbus2, port 1, addr 1 (disconnected)
 usbus2: Controller shutdown complete
 bge0: Disabling fastboot
 bge0: Disabling fastboot
 usbus3: Controller shutdown
 uhub3: at usbus3, port 1, addr 1 (disconnected)
 usbus3: Controller shutdown complete
 usbus4: Controller shutdown
 uhub4: at usbus4, port 1, addr 1 (disconnected)
 ugen4.2: <Razer> at usbus4 (disconnected)
 ums0: at uhub4, port 1, addr 2 (disconnected)
 ukbd0: at uhub4, port 1, addr 2 (disconnected)
 usbus4: Controller shutdown complete
 usbus5: Controller shutdown
 uhub5: at usbus5, port 1, addr 1 (disconnected)
 usbus5: Controller shutdown complete
 usbus6: Controller shutdown
 uhub6: at usbus6, port 1, addr 1 (disconnected)
 usbus6: Controller shutdown complete
 uhci2: wake_prep disabled wake for \\_SB_.C003.C108 (S5)
 uhci3: wake_prep disabled wake for \\_SB_.C003.C10F (S5)
 uhci4: wake_prep disabled wake for \\_SB_.C003.C110 (S5)
 ehci1: wake_prep disabled wake for \\_SB_.C003.C111 (S5)
 uhci0: wake_prep disabled wake for \\_SB_.C003.C119 (S5)
 uhci1: wake_prep disabled wake for \\_SB_.C003.C11A (S5)
 ehci0: wake_prep disabled wake for \\_SB_.C003.C11B (S5)
 GEOM_SCHED: Modevent 2.
 Rebooting...
 cpu_reset: Stopping other CPUs
 Copyright (c) 1992-2012 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 9.0-STABLE #1: Sat Jun 16 11:09:48 CEST 2012
     root@mobileKamikaze.norad:/usr/obj/HP6510b-9/amd64/usr/src/sys/HP6510b-9 amd64
 CPU: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz (2394.05-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping = 11
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant, performance statistics
 real memory  = 8589934592 (8192 MB)
 avail memory = 8227672064 (7846 MB)
 Event timer "LAPIC" quality 400
 ACPI APIC Table: <HP     30C0    >
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0: Changing APIC ID to 1
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 kbd1 at kbdmux0
 GEOM_SCHED: Modevent 0.
 GEOM_SCHED: Initializing global data.
 GEOM_SCHED: Loaded module rr error 0.
 acpi0: <HPQOEM SLIC-MPC> on motherboard
 acpi0: Power Button (fixed)
 acpi0: reservation of 0, a0000 (3) failed
 acpi0: reservation of 100000, bf700000 (3) failed
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Event timer "i8254" frequency 1193182 Hz quality 100
 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
 Event timer "RTC" frequency 32768 Hz quality 0
 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 950
 Event timer "HPET" frequency 14318180 Hz quality 450
 Event timer "HPET1" frequency 14318180 Hz quality 440
 Event timer "HPET2" frequency 14318180 Hz quality 440
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
 acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
 pci0: <ACPI PCI bus> on pcib0
 vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem 0xe4300000-0xe43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
 agp0: <Intel GM965 SVGA controller> on vgapci0
 agp0: aperture size is 256M, detected 7676k stolen memory
 vgapci1: <VGA-compatible display> mem 0xe4400000-0xe44fffff at device 2.1 on pci0
 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x4020-0x403f irq 16 at device 26.0 on pci0
 uhci0: LegSup = 0x2f00
 usbus0 on uhci0
 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x4040-0x405f irq 17 at device 26.1 on pci0
 uhci1: LegSup = 0x2f00
 usbus1 on uhci1
 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xe4500000-0xe45003ff irq 18 at device 26.7 on pci0
 usbus2: EHCI version 1.0
 usbus2 on ehci0
 hdac0: <Intel 82801H HDA Controller> mem 0xe4504000-0xe4507fff irq 16 at device 27.0 on pci0
 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
 pci8: <ACPI PCI bus> on pcib1
 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
 pci16: <ACPI PCI bus> on pcib2
 wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xe4100000-0xe4100fff irq 17 at device 0.0 on pci16
 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
 pci24: <ACPI PCI bus> on pcib3
 pci0:24:0:0: failed to read VPD data.
 bge0: <Broadcom BCM5754/5787 A2, ASIC rev. 0x00b002> mem 0xe4000000-0xe400ffff irq 18 at device 0.0 on pci24
 bge0: CHIP ID 0x0000b002; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
 miibus0: <MII bus> on bge0
 brgphy0: <BCM5754/5787 1000BASE-T media interface> PHY 1 on miibus0
 brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
 bge0: Ethernet address: 00:1a:4b:84:29:4f
 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
 pci40: <ACPI PCI bus> on pcib4
 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x4060-0x407f irq 20 at device 29.0 on pci0
 uhci2: LegSup = 0x2f00
 usbus3 on uhci2
 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x4080-0x409f irq 21 at device 29.1 on pci0
 uhci3: LegSup = 0x2f00
 usbus4 on uhci3
 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x40a0-0x40bf irq 18 at device 29.2 on pci0
 uhci4: LegSup = 0x2f00
 usbus5 on uhci4
 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xe4508000-0xe45083ff irq 20 at device 29.7 on pci0
 usbus6: EHCI version 1.0
 usbus6 on ehci1
 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci2: <ACPI PCI bus> on pcib5
 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe4200000-0xe4200fff irq 16 at device 4.0 on pci2
 cardbus0: <CardBus bus> on cbb0
 pccard0: <16-bit PCCard bus> on cbb0
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 16 at device 31.1 on pci0
 ata0: <ATA channel> at channel 0 on atapci0
 ahci0: <Intel ICH8M AHCI SATA controller> port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0x1577,0x4100-0x411f mem 0xe4509000-0xe45097ff irq 17 at device 31.2 on pci0
 ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
 ahcich0: <AHCI channel> at channel 0 on ahci0
 battery0: <ACPI Control Method Battery> on acpi0
 battery1: <ACPI Control Method Battery> on acpi0
 acpi_acad0: <AC Adapter> on acpi0
 acpi_button0: <Sleep Button> on acpi0
 acpi_lid0: <Control Method Lid Switch> on acpi0
 acpi_wmi0: <ACPI-WMI mapping> on acpi0
 acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
 acpi_hp0: HP event GUID detected, installing event handler
 acpi_hp0: HP CMI GUID detected
 acpi_tz0: <Thermal Zone> on acpi0
 acpi_tz1: <Thermal Zone> on acpi0
 acpi_tz2: <Thermal Zone> on acpi0
 acpi_tz3: <Thermal Zone> on acpi0
 acpi_tz3: _CRT value is absurd, ignored (256.0C)
 acpi_tz4: <Thermal Zone> on acpi0
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: model IntelliMouse, device ID 3
 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77a irq 7 drq 1 on acpi0
 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 Timecounters tick every 1.000 msec
 hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
 hdaa0: <Analog Devices AD1981HD HDA CODEC Audio Function Group> at nid 1 on hdacc0
 pcm0: <Analog Devices AD1981HD HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 5,6 and 8,24,9 on hdaa0
 hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
 unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached)
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 480Mbps High Speed USB v2.0
 usbus3: 12Mbps Full Speed USB v1.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 480Mbps High Speed USB v2.0
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen5.1: <Intel> at usbus5
 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen6.1: <Intel> at usbus6
 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 GEOM_SCHED: Loading: mp = 0xffffffff80e77fe0, g_sched_class = 0xffffffff80e77fe0.
 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
 ada0: <ST9500420ASG 0002SDM1> ATA-8 SATA 2.x device
 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 ada0: Command Queueing enabled
 ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
 ada0: Previously was known as ad4
 cd0 at ata0 bus 0 scbus0 target 0 lun 0
 cd0: <Optiarc DVD RW AD-7560A DH10> Removable CD-ROM SCSI-0 device 
 cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
 cd0: cd present [2356480 x 2048 byte records]
 SMP: AP CPU #1 Launched!
 pccard0: <unknown card> (manufacturer=0x02e6, product=0x0100, function_type=-1) at function 0
 pccard0:    CIS info: VECTOR, CANcardXL, 
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub3: 2 ports with 2 removable, self powered
 uhub4: 2 ports with 2 removable, self powered
 uhub5: 2 ports with 2 removable, self powered
 uhub2: 4 ports with 4 removable, self powered
 Root mount waiting for: usbus6
 uhub6: 6 ports with 6 removable, self powered
 Trying to mount root from ufs:/dev/ufs/5root []...
 ugen4.2: <Razer> at usbus4
 ums0: <Razer Razer Lachesis, class 0/0, rev 1.10/21.00, addr 2> on usbus4
 ums0: 7 buttons and [XYZ] coordinates ID=0
 ukbd0: <Razer Razer Lachesis, class 0/0, rev 1.10/21.00, addr 2> on usbus4
 kbd2 at ukbd0
 vboxdrv: fAsync=0 offMin=0x2f4 offMax=0x1080
 wlan0: Ethernet address: 00:1c:bf:58:3a:87
 GEOM_SCHED: Device ada0s2.sched. created.
 fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
 KLD linux_adobe.ko: depends on kernel - not available or version mismatch
 linker_load_file: Unsupported file type
 drm0: <Intel i965GM> on vgapci0
 info: [drm] MSI enabled 1 message(s)
 info: [drm] AGP at 0xd0000000 256MB
 info: [drm] Initialized i915 1.6.0 20080730
 
 --------------030003070308000204020300--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201208161630.q7GGUFRr066311>