Date: Thu, 25 Aug 2016 08:25:46 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Mori Hiroki <yamori813@yahoo.co.jp> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: sys/mips/mediatek kernel crash on RT3050 Message-ID: <CAJ-Vmomju=NVyhcG5K2UdDwXJZX%2Bc41onn8qUqzGzBW-wYPcSQ@mail.gmail.com> In-Reply-To: <705503.18629.qm@web101707.mail.ssk.yahoo.co.jp> References: <705503.18629.qm@web101707.mail.ssk.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hm, does it require INTRNG these days? -a On 24 August 2016 at 18:11, Mori Hiroki <yamori813@yahoo.co.jp> wrote: > Hi > > I build sys/mips/mediatek for RT3050 box at few days before head. > > This kernel crash. > > This build based on rt3050.dtsi. > > Some one know this problem ? > > Thanks. > > Starting kernel ... > > FDT DTB at: 0x802ce6f0 > CPU clock: 320MHz > Timer clock: 160MHz > UART clock: 106MHz > > U-Boot args (from 0 args): > None > Environment: > entry: mips_init() > RAM size: 32MB (assumed) > Cache info: > picache_stride = 4096 > picache_loopcount = 8 > pdcache_stride = 4096 > pdcache_loopcount = 4 > cpu0: MIPS Technologies processor v76.150 > MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) > L1 i-cache: 4 ways of 256 sets, 32 bytes per line > L1 d-cache: 4 ways of 128 sets, 32 bytes per line > L2 cache: disabled > Config1=0xbea3319e<PerfCount,WatchRegs,MIPS16,EJTAG> > Config2=0x80000000 > Config3=0x420 > Physical memory chunk(s): > 0x334000 - 0x1ffffff, 30195712 bytes (7372 pages) > Maxmem is 0x2000000 > Copyright (c) 1992-2016 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 12.0-CURRENT #1 ed1832a(zrouter): Sun Aug 21 12:19:54 JST 2016 > hiroki@microserver:/storage/home/hiroki/obj/storage/home/hiroki/zrouter/tmp/ > mips.mipsel/storage/home/hiroki/freebsd/sys/Fon_FON2305E_FDT mips > gcc version 4.2.1 20070831 patched [FreeBSD] > Preloaded elf kernel "kernel" at 0x8032afb0. > real memory = 33554432 (32768K bytes) > Physical memory chunk(s): > 0x003c0000 - 0x01f3efff, 28831744 bytes (7039 pages) > avail memory = 28397568 (27MB) > ULE: setup cpu 0 > random: entropy device external interface > firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0x802d86d0 > firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0x802d2550 > firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0x802d45d0 > wlan: <802.11 Link Layer> > firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0x802d6650 > null: <full device, null device, zero device> > openfirm: <Open Firmware control device> > mem: <memory> > nexus0: <MIPS32 root nexus> > random: harvesting attach, 8 bytes (4 bits) from nexus0 > ofwbus0: <Open Firmware Device Tree> on nexus0 > palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0 > random: harvesting attach, 8 bytes (4 bits) from palmbus0 > random: harvesting attach, 8 bytes (4 bits) from ofwbus0 > cpupic0: <MIPS32 Interrupt Controller> on ofwbus0 > random: harvesting attach, 8 bytes (4 bits) from cpupic0 > sysc0: <MTK System Controller> mem 0-0xff on palmbus0 > random: harvesting attach, 8 bytes (4 bits) from sysc0 > pinctrl0: <MTK Pin Controller> on ofwbus0 > pinctrl0: GPIO mode start: 0x0000029d > Processing 1 pin-config node(s) in pinctrl-0 for spi@b00 > Processing 1 pin-config node(s) in pinctrl-0 for uartlite@c00 > Processing 1 pin-config node(s) in pinctrl-0 for pinctrl > pinctrl0: GPIO mode end : 0x0000005d > random: harvesting attach, 8 bytes (4 bits) from pinctrl0 > rstctrl0: <MTK Reset Controller> on ofwbus0 > random: harvesting attach, 8 bytes (4 bits) from rstctrl0 > clkctrl0: <MTK Clock Controller> on ofwbus0 > random: harvesting attach, 8 bytes (4 bits) from clkctrl0 > intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 6 on palmbus0 > random: harvesting attach, 8 bytes (4 bits) from intc0 > gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 9 on palmbus0 > gpiobus0: <OFW GPIO bus> on gpio0 > random: harvesting attach, 8 bytes (4 bits) from gpiobus0 > random: harvesting attach, 8 bytes (4 bits) from gpio0 > palmbus0: <timer@100> mem 0x100-0x11f irq 4 compat ralink,rt3050-timer (no drive > r attached) > palmbus0: <watchdog@120> mem 0x120-0x12f irq 5 compat ralink,rt3050-wdt (no driv > er attached) > palmbus0: <memc@300> mem 0x300-0x3ff irq 7 compat ralink,rt3050-memc (no driver > attached) > palmbus0: <uart@500> mem 0x500-0x5ff irq 8 disabled compat ralink,rt3050-uart (n > o driver attached) > gpioled0: <GPIO led> at pin 14 on gpiobus0 > random: harvesting attach, 8 bytes (4 bits) from gpioled0 > gpioled1: <GPIO led> at pin 11 on gpiobus0 > random: harvesting attach, 8 bytes (4 bits) from gpioled1 > gpioled2: <GPIO led> at pin 9 on gpiobus0 > random: harvesting attach, 8 bytes (4 bits) from gpioled2 > gpioled3: <GPIO led> at pin 12 on gpiobus0 > random: harvesting attach, 8 bytes (4 bits) from gpioled3 > gpioc0: <GPIO controller> on gpio0 > random: harvesting attach, 8 bytes (4 bits) from gpioc0 > palmbus0: <gpio@638> mem 0x638-0x65b disabled compat ralink,rt3050-gpio (no driv > er attached) > palmbus0: <gpio@660> mem 0x660-0x683 disabled compat ralink,rt3050-gpio (no driv > er attached) > spi0: <MTK SPI Controller (v1)> mem 0xb00-0xbff on palmbus0 > spibus0: <OFW SPI bus> on spi0 > mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 > mx25l0: mx25ll64, sector 65536 bytes, 128 sectors > random: harvesting attach, 8 bytes (4 bits) from mx25l0 > random: harvesting attach, 8 bytes (4 bits) from spibus0 > random: harvesting attach, 8 bytes (4 bits) from spi0 > uart0: <MTK UART Controller> mem 0xc00-0xcff irq 10 on palmbus0 > uart0: console (57971,n,8,1) > uart0: fast interrupt > uart0: PPS capture mode: DCDinvalid > random: harvesting attach, 8 bytes (4 bits) from uart0 > ofwbus0: <usbphy> compat ralink,rt3050-usbphy (no driver attached) > rt0: <Ralink RT3050 onChip Ethernet driver> mem 0x10100000-0x1010ffff irq 0 on o > fwbus0 > rt0: RT305XF Ethernet MAC (rev 0x00000000) > rt0: use hardcoded 00:18:e7:d5:83:90 macaddr > rt0: bpf attached > rt0: Ethernet address: 00:18:e7:d5:83:90 > random: harvesting attach, 8 bytes (4 bits) from rt0 > mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 1 on ofwbus0 > miibus0: <MII bus> on mtkswitch0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 > ukphy0: OUI 0x000c43, model 0x0001, rev. 7 > ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > random: harvesting attach, 8 bytes (4 bits) from ukphy0 > random: harvesting attach, 8 bytes (4 bits) from miibus0 > miibus1: <MII bus> on mtkswitch0 > ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 > ukphy1: OUI 0x000c43, model 0x0001, rev. 7 > ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > random: harvesting attach, 8 bytes (4 bits) from ukphy1 > random: harvesting attach, 8 bytes (4 bits) from miibus1 > miibus2: <MII bus> on mtkswitch0 > ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 > ukphy2: OUI 0x000c43, model 0x0001, rev. 7 > ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > random: harvesting attach, 8 bytes (4 bits) from ukphy2 > random: harvesting attach, 8 bytes (4 bits) from miibus2 > miibus3: <MII bus> on mtkswitch0 > ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 > ukphy3: OUI 0x000c43, model 0x0001, rev. 7 > ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > random: harvesting attach, 8 bytes (4 bits) from ukphy3 > random: harvesting attach, 8 bytes (4 bits) from miibus3 > miibus4: <MII bus> on mtkswitch0 > ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 > ukphy4: OUI 0x000c43, model 0x0001, rev. 7 > ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > random: harvesting attach, 8 bytes (4 bits) from ukphy4 > random: harvesting attach, 8 bytes (4 bits) from miibus4 > etherswitch0: <Switch controller> on mtkswitch0 > random: harvesting attach, 8 bytes (4 bits) from etherswitch0 > mdio0: <MDIO> on mtkswitch0 > random: harvesting attach, 8 bytes (4 bits) from mdio0 > random: harvesting attach, 8 bytes (4 bits) from mtkswitch0 > ofwbus0: <wmac@10180000> mem 0x10180000-0x101bffff irq 2 compat ralink,rt3050-wm > ac (no driver attached) > ofwbus0: <otg@101c0000> mem 0x101c0000-0x101fffff irq 3 disabled compat ralink,r > t3050-otg (no driver attached) > ofwbus0: <gpio-leds> compat gpio-leds (no driver attached) > ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver attached) > clock0: <Generic MIPS32 ticker> on nexus0 > panic: Unable to add hard IRQ 7 handler > Uptime: 1s > Automatic reboot in 15 seconds - press a key on the console to abort > Rebooting... > _______________________________________________ > freebsd-mips@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-mips > To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmomju=NVyhcG5K2UdDwXJZX%2Bc41onn8qUqzGzBW-wYPcSQ>