Date: Tue, 07 Oct 2003 16:24:14 -0400 From: Mike Tancsa <mike@sentex.net> To: Janet Sullivan <ciscogeek@bgp4.net>, freebsd-stable@freebsd.org Subject: Re: latest stable won't boot on Dell Inspiron 8200 Message-ID: <6.0.0.22.0.20031007162329.0972c860@209.112.4.2> In-Reply-To: <3F831F37.6090009@bgp4.net> References: <3F831F37.6090009@bgp4.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Try adding
options NO_PSE_HACK
options DISABLE_PSE
It fixed it for me on my
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2393.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,S
S,HTT,TM,PBE>
---Mike
At 04:16 PM 07/10/2003, Janet Sullivan wrote:
>I cvsup'd to today's stable, only to end up with a kernel that wouldn't
>boot all the way. It would freeze after printing out the line
>
>Mounting root from ufs:/dev/ad0s2a
>
>I backed up to stable from 2003.10.06.00.00.00, and my laptop now boots
>fine again.
>
>I'll try to to narrow this down further, but a recent commit seems to have
>broken stable for me, with either my custom kernel or GENERIC.
>
>My dmesg is below.
>
>Thanks.
>
>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 4.9-RC #0: Tue Oct 7 12:54:27 MST 2003
> root@nagi.bgp4.net:/usr/obj/usr/src/sys/NAGI
>Timecounter "i8254" frequency 1193182 Hz
>CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz (1695.01-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
>Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
>real memory = 536748032 (524168K bytes)
>avail memory = 518496256 (506344K bytes)
>Preloaded elf kernel "kernel" at 0xc03b2000.
>Pentium Pro MTRR support enabled
>md0: Malloc disk
>Using $PIR table, 11 entries at 0xc00fbb90
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Intel 82845 Host to PCI bridge> on motherboard
>pci0: <PCI bus> on pcib0
>agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xebffffff at device
>0.0 on pci0
>pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>drm0: <ATI Radeon Lf R250 Mobility 9000 M9> port 0xc000-0xc0ff mem
>0xfcff0000-0xfcffffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1
>info: [drm] AGP at 0xe8000000 64MB
>info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
>uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f
>irq 11 at device 29.0 on pci0
>usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f
>irq 11 at device 29.2 on pci0
>usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
>pci2: <PCI bus> on pcib2
>xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem
>0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2
>xl0: Ethernet address: 00:06:5b:bb:69:96
>miibus0: <MII bus> on xl0
>ukphy0: <Generic IEEE 802.3u media interface> on miibus0
>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>chip0: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device
>1.0 on pci2
>chip1: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device
>1.1 on pci2
>fwohci0: <Texas Instruments PCI4451> mem
>0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8fff7ff irq 11 at device 1.2 on pci2
>fwohci0: OHCI version 1.0 (ROM=1)
>fwohci0: No. of Isochronous channel is 4.
>fwohci0: EUI64 35:4f:c0:00:39:b1:c4:21
>fwohci0: Phy 1394a available S400, 1 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>if_fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 36:4f:c0:b1:c4:21
>fwohci0: Initiate bus reset
>fwohci0: BUS reset
>fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>chip2: <Texas Instruments PCI1410 CardBus controller> irq 11 at device 3.0
>on pci2
>isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH3 ATA100 controller> port
>0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at
>device 31.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>pcm0: <Intel ICH3 (82801CA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at
>device 31.5 on pci0
>pcm0: <Cirrus Logic CS4205 AC97 Codec>
>pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
>orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
>pmtimer0 on isa0
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model GlidePoint, device ID 0
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
>ad0: 38154MB <HTS548040M9AT00> [77520/16/63] at ata0-master UDMA100
>acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8081N> at ata0-slave WDMA2
>Mounting root from ufs:/dev/ad0s2a
>swapon: adding /dev/ad0s2b as swap device
>Automatic boot in progress...
>/dev/ad0s2a:
>FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s2a:
>clean, 23717 free
>(293 frags, 2928 blocks, 0.6% fragmentation)
>/dev/ad0s2e:
>FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s2e:
>clean, 14952 free
>(240 frags, 1839 blocks, 1.0% fragmentation)
>/dev/ad0s2g:
>FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s2g:
>clean, 521477 free
>(18917 frags, 62820 blocks, 1.4% fragmentation)
>/dev/ad0s2f:
>FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s2f:
>clean, 292396 free
>(252 frags, 36518 blocks, 0.1% fragmentation)
>Doing initial network setup:
> hostname
> ipmon
> ipfilter
>.
>xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> options=3<rxcsum,txcsum>
> inet 10.94.0.105 netmask 0xfffffff0 broadcast 10.94.0.111
> ether 00:06:5b:bb:69:96
> media: Ethernet 100baseTX <full-duplex>
> status: active
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> inet 127.0.0.1 netmask 0xff000000
>add net default: gateway 10.94.0.110
>Additional routing options:
> TCP keepalive=YES
>.
>Routing daemons:
>.
>Mounting NFS file systems:
>.
>Additional daemons:
> syslogd
>.
>Doing additional network setup:
> ntpd
>.
>Starting final network daemons:
> nfsiod
> NFS access cache time=2
>.
>ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
>a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
>Starting standard daemons:
> cron
> sshd
> usbd
> sendmail-submit
> sendmail-clientmqueue
>.
>Initial rc.i386 initialization:
>.
>Configuring syscons:
> blanktime
> screensaver
> moused
>.
>Additional ABI support:
> linux
>.
>Local package initialization:
> Firewall_Reset
>.
>Additional TCP options:
>.
>
>
>_______________________________________________
>freebsd-stable@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.0.20031007162329.0972c860>