Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 05 Apr 2003 14:44:22 -0600
From:      Alfonso Romero <ibac@prodigy.net.mx>
To:        Benedict Plante <erythro73@SexMagnet.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: PPPoE : User can't access while root can!
Message-ID:  <017801c2fbb4$23a07ac0$0100a8c0@ibac>
References:  <20030405153843.10d7c6d7.erythro73@SexMagnet.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Iīm no expert, but hereīs my opinion: Donīt you need to use a resolv.conf
file?

Alfonso Romero

----- Original Message -----
From: "Benedict Plante" <erythro73@SexMagnet.com>
To: <freebsd-questions@freebsd.org>
Sent: Saturday, April 05, 2003 2:38 PM
Subject: PPPoE : User can't access while root can!


> Hello all!
>            Well, let get straight to the point. I use Bell Canada
Sympatico Internet Service Provider, with a DSL connection, and I'm using
FreeBSD-4.8-release.
>
> I've used FreeBSD-4.7 for a while, and sometime, when I installed, ppp
wasn't working for user... unless one time, when I completely wipe my
FreeBSD-4.7 partition and reinstalling it, it worked. Later, I deinstalled
it and reinstalled it completely and it wasn't working.
>
> Now, I've move to FreeBSD-4.8-release and its still not working! I mean...
it does work as root but not as a user.
>
> If I use internet with a user from the wheel group, it gives me that
message:
>
> $ ping www.google.ca
> ping: cannot resolve www.google.ca: Host name lookup failure
>
> In order to make my connection work, I need to configure my
/etc/ppp/ppp.conf along with rp-pppoe-3.5.
>
> -----Here is my /etc/ppp/ppp.conf:
>
> default:
>   set log Phase tun command
>   set ifaddr 10.0.0.1/0 10.0.0.2/0
>
> sympatico.ca:
>   set device PPPoE:vr0
>   set authname *
>   set authkey *
>   set dial
>   set login
>   add default HISADDR
>
>
>
> -----Here is my /etc/rc.conf:
>
> hostname="FreeBSD"
> kern_securelevel_enable="NO"
> linux_enable="YES"
> moused_enable="YES"
> moused_port="/dev/psm0"
> moused_type="auto"
> nfs_reserved_port_only="YES"
> sendmail_enable="YES"
> sshd_enable="YES"
> usbd_enable="YES"
> ppp_enable="YES"
> ppp_mode="ddial"
> ppp_profile="sympatico.ca"
> ppp_nat="YES"                #I tried with it turned to "NO" also
> inetd_enable="YES"
>
>
> -----Here is my /var/log/ppp.log:
>
>  15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook
"62031100098933-")
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SESSIONID
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SUCCESS
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: carrier -> login
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: login -> lcp
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Warning: deflink: Reducing
configured MRU from 1500 to 1492
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: bundle: Authenticate
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: his = PAP, mine =
none
> Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Pap Output: *** ********
> Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: Pap Input: SUCCESS ()
> Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: lcp -> open
> Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: bundle: Network
> Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: IPV6CP protocol
reject closes IPV6CP !
> Apr  5 15:25:06 FreeBSD last message repeated 5 times
>
>
>
>
>
> -----My ifconfig as root (working)
> FreeBSD# ifconfig
> vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1
>         ether 00:50:ba:e5:bd:b0
>         media: Ethernet autoselect (10baseT/UTP)
>         status: active
> lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
> sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
> faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
>         inet 127.0.0.1 netmask 0xff000000
> ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
> tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
>         inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff
>         Opened by PID 53
>
>
>
> -----My ifconfig as user (wheel):
>
> $ ifconfig
> vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1
>         ether 00:50:ba:e5:bd:b0
>         media: Ethernet autoselect (10baseT/UTP)
>         status: active
> lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
> sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
> faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         inet6 ::1 prefixlen 128
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
>         inet 127.0.0.1 netmask 0xff000000
> ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
> tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
>         inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff
>         Opened by PID 53
>
>
>
>
> ----- Do you need some more info??? Thank you to all the people who will
help me :).
>
> Erythro73
>
>
>
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?017801c2fbb4$23a07ac0$0100a8c0>