From owner-freebsd-scsi Fri Apr 19 08:42:21 1996 Return-Path: owner-freebsd-scsi Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id IAA13747 for freebsd-scsi-outgoing; Fri, 19 Apr 1996 08:42:21 -0700 (PDT) Received: from sbac.edu (r2d3.sbac.edu [150.104.65.1]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id IAA13739 for ; Fri, 19 Apr 1996 08:42:12 -0700 (PDT) Received: (from cromerdh@localhost) by sbac.edu (8.6.11/8.6.11) id LAA43751; Fri, 19 Apr 1996 11:25:00 -0400 Date: Fri, 19 Apr 1996 11:24:58 -0400 (EDT) From: Dan Cromer To: Joerg Wunsch cc: freebsd-scsi@freebsd.org Subject: Re: Problem with Buslogic(?) kernel panic In-Reply-To: <4l7eea$520@uriah.heep.sax.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-scsi@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Joerg, Thanks for your response. I'll check with Buslogic for possible firmware upgrade, but when Win95/WinNT/OS2/Linux all see the drive fine (OS/2 and Linux are installed on it) it points to something in FreeBSD. The strangest part is that the initial boot load was coming from that same drive, and the install used the same controller to access the CD-ROM, the FDISK equivalent partitioned and formatted the drive, and put the software on it. I've subsequently installed FreeBSD to my IDE drive, but I still get the message. I haven't had time even to test whether the CD-ROM or SCSI disk are accessible, though I doubt it. I'll follow up with my results to freebsd-scsi@freebsd.org. Dan On 19 Apr 1996, J Wunsch wrote: > Dan Cromer writes: > > > I may be having a similar problem, and would like to learn of > >solutions, too. Walnut Creek FreeBSD 2.1 CD-ROM install seems to work > >fine (from Toshiba 3401 SCSI), but at reboot I get last lines: > >pci0:20 Buslogic, device=0x1040, class=storage (SCSI) [no driver > ^^^^^^^^^ > > assigned] > ^^^^^^^^ > > That means the `bt' driver didn't recognize the drive for some reason, > maybe it's a firmware problem of your BusLogic. > > If upgrading the firmware doesn't help, please get in contact with > freebsd-scsi@freebsd.org. (Hey, remember, there's no such thing as > Usenet support for FreeBSD! All the support goes in mailing lists. :-) > > -- > cheers, J"org > > joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE > Never trust an operating system you don't have sources for. ;-) > > >