Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 9 Jul 2003 19:33:28 +0200
From:      "'Wilko Bulte'" <wkb@freebie.xs4all.nl>
To:        Tomas Hodan <tomas@hodan.sk>
Cc:        freebsd-scsi@freebsd.org
Subject:   Re: ql2200
Message-ID:  <20030709173328.GA75612@freebie.xs4all.nl>
In-Reply-To: <000001c345f9$f4f02d20$3564f892@emea.ads.autodesk.com>
References:  <20030708192824.GA64643@freebie.xs4all.nl> <000001c345f9$f4f02d20$3564f892@emea.ads.autodesk.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Wed, Jul 09, 2003 at 10:10:33AM +0100, Tomas Hodan wrote:

Hi Tomas,

Then my bet would really be the machine. 

> Hi Wilko,
> 
> I have tried to load the ispfw.ko module, with same result.
> I think my problem could be more related either to the machine, ibm
> intellistation zpro or to the disk array, but I have tried two different
> models.
> 
> tomas
> 
> -----Original Message-----
> From: Wilko Bulte [mailto:wkb@freebie.xs4all.nl] 
> Sent: Tuesday, July 08, 2003 8:28 PM
> To: Tomas Hodan
> Cc: freebsd-scsi@freebsd.org
> Subject: Re: ql2200
> 
> 
> On Tue, Jul 08, 2003 at 04:37:27PM +0100, Tomas Hodan wrote:
> 
> Matt (who wrote the isp driver) will ask you if you loaded ispfw.ko (the
> firmware for the cards the isp driver supports).
> 
> Wilko
> 
> > 
> > I have problem to get running qlogic 2200 in current. I have tried 
> > diffenet qlogic boards (but all was ql2200), different qlogic bios, 
> > disk arrays, different freebsd version, different pci slots.
> > 
> > with current version (cvs and build) from
> > Jul  7 10:11:48 pica kernel: FreeBSD 5.1-CURRENT #0: Fri Jul  4 
> > 14:03:50 GMT 2003
> > 
> > I'm getting this error :
> > 
> > Jul  7 10:11:49 pica kernel: isp0: <Qlogic ISP 2200 PCI FC-AL Adapter>
> 
> > port 0x9800-0x98ff mem 0xf2003000-0xf2 003fff irq 11 at device 8.0 on 
> > pci3 Jul  7 10:11:49 pica kernel: isp0: Polled Mailbox Command (0x2) 
> > Timeout Jul  7 10:11:49 pica kernel: device_probe_and_attach: isp0 
> > attach returned 6
> > 
> > sometimes the kernel stays in this state forever, sometime after 
> > sometime it finish booting. I had twice succesfull boot with the 
> > qlogic board and I was able to use the disks connected to the board. 
> > after next reboot it stops to work.
> > 
> > anyone any ides?
> > 
> > thanks
> > tomas
> > 
> > _______________________________________________
> > freebsd-scsi@freebsd.org mailing list 
> > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> > To unsubscribe, send any mail to 
> > "freebsd-scsi-unsubscribe@freebsd.org"
> ---end of quoted text---
> 
> -- 
> |   / o / /_  _   		wilko@FreeBSD.org
> |/|/ / / /(  (_)  Bulte				
---end of quoted text---

-- 
|   / o / /_  _   		wilko@FreeBSD.org
|/|/ / / /(  (_)  Bulte				



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?20030709173328.GA75612>