Date: Fri, 23 Jan 2004 09:59:33 -0600 From: Matt Reinhart <matt@antitheoretical.org> To: Olaf Hoyer <ohoyer@gaff.hhhr.ision.net> Cc: freebsd-questions@freebsd.org Subject: Re: Trouble booting 4.9 on Compaq DL360 Message-ID: <20040123155933.GA16568@virtue.antitheoretical.org> In-Reply-To: <20040123114853.R69046@gaff.hhhr.ision.net> References: <20040123055950.GA8431@virtue.antitheoretical.org> <20040123114853.R69046@gaff.hhhr.ision.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> Which model of the Dl360 do you have? > > ida is normally used on the Generation 1, which is a completely white > box, wheras the G2 has a black outfit, and uses the ciss driver. > But I've never seen an G1 with 1266 MHz, or were those very late series? > It is a late G1 in a completely white outfit. > As OSType in the Setup tool I set Win NT4, which is sometimes important > for irq routing. I created a standard RAID 1 Volume, with no diag > partition whatsoever involved, and then 4.7-R and 4.8-R installed > without problems, I chose not to use bootmgr, but a standard mbr. > > worked right out of the box. > > > Do you have a chance to try again with perhaps a 4.7-R disc? I don't have a 4.7-R disc, but I haven't checked the BIOS setup. I'm going to try using the "SmartStart" disc to access the setup tools and set it to Win NT4. Thanks for your help, Olaf. -Matt
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040123155933.GA16568>