Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 20 Apr 2011 11:54:31 +0100
From:      Paul Thornton <prt@prt.org>
To:        freebsd-net@freebsd.org
Cc:        pyunyh@gmail.com
Subject:   Re: Broadcom BCM57765 support?
Message-ID:  <4DAEBB67.7070303@prt.org>
In-Reply-To: <20110419220907.GD1637@michelle.cdnetworks.com>
References:  <4DADD913.5010208@prt.org> <20110419220907.GD1637@michelle.cdnetworks.com>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------010401070707060509080501
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

On 19/04/2011 23:09, YongHyeon PYUN wrote:
> Here is experimental patch for BCM57765 family controllers. I
> don't have these controllers so the patch was not tested at all
> except compile. Recent Broadcom controllers like BCM57765 support
> EEE(Energy Efficient Ethernet) feature but it is not yet supported
> by the patch.

Many thanks for this patch.

The patch wouldn't apply cleanly to either the 8.2-release source or to
the latest if_bge / if_bgereg so I had to do it manually; but that
wasn't too much of a problem.  What revision should I have tried to
apply the patch to?

Things are not fully working yet after the patch is applied though.

The current state is that the device is recognised, MAC address detected
OK, link state detected OK; you can ifconfig up the interface without a
problem.  However, I'm seeing "bge0: watchdog timeout -- resetting"
messages shortly after attempting to ping something on the LAN.  The
machine being pinged doesn't show up in the ARP cache.

Looking at the switch that its connected to, I see the mac address
learned on the port, and the received packet and byte counts
incrementing with no errors so I believe that the machine is
successfully transmitting frames but not able to receive them properly.
 The switch stats show that the switch is transmitting frames to the
machine.

> Also it would good to see the output of "pciconf -lcbv" and dmesg
> after applying the patch.

The machine in question is a 2010 Mac Mini (model rev A1347) - this has
a number of "features" that make FreeBSD an interesting challenge.  The
kernel I'm using is a normal 8.2-GENERIC with another very minor tweak
to stop the Nvidia MCP89 ata controller from being used in SATA mode
(this doesn't work - Linux has a workaround based on using UDMA).

Attached is a dmesg, pciconf, and the output of sysctl -a dev.bge.0
after the patch was applied.

If there is any other debugging information I need to get to help please
let me know.  Once we have this working I'll willingly give it some
thorough proper testing.

Thanks again,

Paul.

--------------010401070707060509080501
Content-Type: text/plain;
 name="dmesg1.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="dmesg1.txt"

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #1: Wed Apr 20 08:58:24 UTC 2011
    root@badger.prt.org:/usr/src/sys/amd64/compile/GENERIC-TEST2 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz (2389.26-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 1780576256 (1698 MB)
ACPI APIC Table: <APPLE  Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <APPLE Apple00> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x57, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 1.0 (no driver attached)
pci0: <memory, RAM> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <memory, RAM> at device 1.3 (no driver attached)
pci0: <memory, RAM> at device 2.0 (no driver attached)
pci0: <memory, RAM> at device 2.1 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2100-0x21ff at device 3.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory, RAM> at device 3.1 (no driver attached)
pci0: <serial bus, SMBus> at device 3.2 (no driver attached)
pci0: <memory, RAM> at device 3.3 (no driver attached)
pci0: <processor> at device 3.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0x9358a000-0x9358afff irq 18 at device 4.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x9358b100-0x9358b1ff irq 19 at device 4.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.10
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
ohci1: <OHCI (generic) USB controller> mem 0x93589000-0x93589fff irq 20 at device 6.0 on pci0
ohci1: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x9358b000-0x9358b0ff irq 21 at device 6.1 on pci0
ehci1: [ITHREAD]
usbus3: EHCI version 1.10
usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <multimedia, HDA> at device 8.0 (no driver attached)
atapci0: <nVidia nForce MCP89 UDMA100 controller> port 0x2298-0x229f,0x22a4-0x22a7,0x2290-0x2297,0x22a0-0x22a3,0x2280-0x228f mem 0x93584000-0x93585fff irq 23 at device 10.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <memory, RAM> at device 11.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
fwohci0: <1394 Open Host Controller Interface> mem 0x93404000-0x934047ff,0x93400000-0x93403fff irq 16 at device 0.0 on pci2
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 e8:06:88:ff:fe:c5:72:4e
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: ea:06:88:c5:72:4e
fwe0: Ethernet address: ea:06:88:c5:72:4e
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: e8:06:88:ff:fe:c5:72:4e @ 0xfffe00000000, S800, maxrec 4096
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x6b3c4000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, non CYCLEMASTER mode
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom unknown BCM57765, ASIC rev. 0x57785000> mem 0x93100000-0x9310ffff,0x93110000-0x9311ffff irq 18 at device 0.0 on pci4
bge0: CHIP ID 0x57785000; ASIC REV 0x57785; CHIP REV 0x577850; PCI-E
miibus0: <MII bus> on bge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: c4:2c:03:08:0b:9d
bge0: [FILTER]
pci4: <base peripheral, SD host controller> at device 0.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0x92000000-0x92ffffff,0x80000000-0x8fffffff,0x90000000-0x91ffffff irq 20 at device 0.0 on pci5
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd: unable to get the current command byte value.
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to get the current command byte value.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
RTC BIOS diagnostic error f1<clock_battery,ROM_cksum,config_unit,memory_size>
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) 
fwohci0: phy int
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad4: DMA limited to UDMA33, device found non-ATA66 cable
ad4: 305245MB <Hitachi HTS545032B9SA02 PB3AC60W> at ata2-master UDMA33 
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <nVidia> at usbus2
uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <nVidia> at usbus3
uhub3: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
firewire0: New S400 device ID:000000301b464286
ata3: timeout waiting for read DRQ
uhub0: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
ata3: timeout waiting for read DRQ
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <HL-DT-STDVDRW GA32N/KC08> at ata3-master UDMA33 
uhub1: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.2: <Apple, Inc.> at usbus1
uhub4: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 2> on usbus1
ugen2.2: <Microsoft> at usbus2
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.99, addr 2> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0
uhub4: 3 ports with 2 removable, bus powered
SMP: AP CPU #1 Launched!
ugen1.3: <Apple, Inc> at usbus1
ugen2.3: <Apple Computer, Inc.> at usbus2
ukbd1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 3> on usbus1
kbd2 at ukbd1
uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 3> on usbus2
uhid1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 3> on usbus1
ugen2.4: <Apple Inc.> at usbus2
uhub5: <Apple Inc. BRCM2070 Hub, class 9/0, rev 2.00/1.00, addr 4> on usbus2
uhub5: 3 ports with 0 removable, self powered
ugen2.5: <vendor 0x05ac> at usbus2
ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 5> on usbus2
kbd3 at ukbd0
ugen2.6: <vendor 0x05ac> at usbus2
ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 6> on usbus2
ums1: 3 buttons and [XY] coordinates ID=2
ugen2.7: <Apple Inc.> at usbus2
Trying to mount root from ufs:/dev/ad4p2a
WARNING: /mnt was not properly dismounted
WARNING: /mnt/tmp was not properly dismounted
WARNING: /mnt/usr was not properly dismounted
WARNING: /mnt/var was not properly dismounted
ugen1.4: <Crucial> at usbus1
umass0: <Crucial Gizmo! Plus, class 0/0, rev 2.00/11.00, addr 4> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:1:0:-1: Attached to scbus1
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Crucial Gizmo! Plus 1100> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C)

--------------010401070707060509080501
Content-Type: text/plain;
 name="pciconf.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="pciconf.txt"

hostb0@pci0:0:0:0:	class=0x060000 card=0x00000000 chip=0x0d6010de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = bridge
    subclass   = HOST-PCI
none0@pci0:0:0:1:	class=0x050000 card=0x00000000 chip=0x0d6810de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none1@pci0:0:1:0:	class=0x050000 card=0x00000000 chip=0x0d6d10de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none2@pci0:0:1:1:	class=0x050000 card=0x00000000 chip=0x0d6e10de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none3@pci0:0:1:2:	class=0x050000 card=0x00000000 chip=0x0d6f10de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none4@pci0:0:1:3:	class=0x050000 card=0x00000000 chip=0x0d7010de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none5@pci0:0:2:0:	class=0x050000 card=0x00000000 chip=0x0d7110de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none6@pci0:0:2:1:	class=0x050000 card=0x00000000 chip=0x0d7210de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
isab0@pci0:0:3:0:	class=0x060100 card=0xcb89106b chip=0x0d8010de rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = bridge
    subclass   = PCI-ISA
    bar   [10] = type I/O Port, range 32, base 0x2100, size 256, enabled
none7@pci0:0:3:1:	class=0x050000 card=0x00000000 chip=0x0d7b10de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none8@pci0:0:3:2:	class=0x0c0500 card=0xcb8910de chip=0x0d7910de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = serial bus
    subclass   = SMBus
    bar   [20] = type I/O Port, range 32, base 0x2240, size 64, enabled
    bar   [24] = type I/O Port, range 32, base 0x2200, size 64, enabled
    cap 01[44] = powerspec 2  supports D0 D3  current D0
none9@pci0:0:3:3:	class=0x050000 card=0x00000000 chip=0x0d6910de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
none10@pci0:0:3:4:	class=0x0b4000 card=0xcb8910de chip=0x0d7a10de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = processor
    bar   [10] = type Memory, range 32, base 0x93500000, size 524288, enabled
ohci0@pci0:0:4:0:	class=0x0c0310 card=0xcb8910de chip=0x0d9c10de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0x9358a000, size 4096, enabled
    cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0
ehci0@pci0:0:4:1:	class=0x0c0320 card=0xcb8910de chip=0x0d9d10de rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0x9358b100, size 256, enabled
    cap 0a[44] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
ohci1@pci0:0:6:0:	class=0x0c0310 card=0xcb8910de chip=0x0d9c10de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0x93589000, size 4096, enabled
    cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0
ehci1@pci0:0:6:1:	class=0x0c0320 card=0xcb8910de chip=0x0d9d10de rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0x9358b000, size 256, enabled
    cap 0a[44] = EHCI Debug Port at offset 0xa0 in map 0x14
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none11@pci0:0:8:0:	class=0x040300 card=0xcb8910de chip=0x0d9410de rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 32, base 0x93580000, size 16384, enabled
    cap 01[44] = powerspec 2  supports D0 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
    cap 08[6c] = HT MSI fixed address window disabled at 0xfee00000
atapci0@pci0:0:10:0:	class=0x010185 card=0xcb89106b chip=0x0d8510de rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0x2298, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0x22a4, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0x2290, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x22a0, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0x2280, size 16, enabled
    bar   [24] = type Memory, range 32, base 0x93584000, size 8192, enabled
    cap 01[44] = powerspec 2  supports D0 D3  current D0
    cap 12[8c] = SATA Index-Data Pair
    cap 05[b0] = MSI supports 8 messages, 64 bit 
none12@pci0:0:11:0:	class=0x050000 card=0x00000000 chip=0x0d7510de rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = memory
    subclass   = RAM
    bar   [10] = type Memory, range 32, base 0x93588000, size 4096, enabled
    cap 01[44] = powerspec 2  supports D0 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit, vector masks 
pcib1@pci0:0:14:0:	class=0x060400 card=0x000010de chip=0x0d9a10de rev=0xa1 hdr=0x01
    vendor     = 'NVIDIA Corporation'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[40] = PCI Bridge card=0x000010de
    cap 01[48] = powerspec 3  supports D0 D3  current D0
    cap 05[50] = MSI supports 2 messages, 64 bit 
    cap 08[60] = HT MSI address window disabled at 0xfee00000
    cap 10[80] = PCI-Express 1 root port max data 128(128) link x1(x1)
pcib3@pci0:0:21:0:	class=0x060400 card=0x000010de chip=0x0d9b10de rev=0xa1 hdr=0x01
    vendor     = 'NVIDIA Corporation'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[40] = PCI Bridge card=0x000010de
    cap 01[48] = powerspec 3  supports D0 D3  current D0
    cap 05[50] = MSI supports 2 messages, 64 bit 
    cap 08[60] = HT MSI address window disabled at 0xfee00000
    cap 10[80] = PCI-Express 1 root port max data 128(128) link x1(x1)
pcib4@pci0:0:22:0:	class=0x060400 card=0x000010de chip=0x0d9b10de rev=0xa1 hdr=0x01
    vendor     = 'NVIDIA Corporation'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[40] = PCI Bridge card=0x000010de
    cap 01[48] = powerspec 3  supports D0 D3  current D0
    cap 05[50] = MSI supports 2 messages, 64 bit 
    cap 08[60] = HT MSI address window enabled at 0xfee00000
    cap 10[80] = PCI-Express 1 root port max data 128(128) link x1(x1)
pcib5@pci0:0:23:0:	class=0x060400 card=0x000010de chip=0x0d7610de rev=0xa1 hdr=0x01
    vendor     = 'NVIDIA Corporation'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[40] = PCI Bridge card=0x000010de
    cap 01[48] = powerspec 2  supports D0 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit 
pcib2@pci0:1:0:0:	class=0x060400 card=0x00000000 chip=0x823e104c rev=0x01 hdr=0x01
    vendor     = 'Texas Instruments (TI)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 05[60] = MSI supports 16 messages, 64 bit 
    cap 0d[80] = PCI Bridge card=0x00000000
    cap 10[90] = PCI-Express 1 PCI bridge max data 128(512) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 1 non-fatal 1 corrected
fwohci0@pci0:2:0:0:	class=0x0c0010 card=0x00000000 chip=0x823f104c rev=0x01 hdr=0x00
    vendor     = 'Texas Instruments (TI)'
    class      = serial bus
    subclass   = FireWire
    bar   [10] = type Memory, range 32, base 0x93404000, size 2048, enabled
    bar   [14] = type Memory, range 32, base 0x93400000, size 16384, enabled
    cap 01[44] = powerspec 3  supports D0 D1 D2 D3  current D0
none13@pci0:3:0:0:	class=0x028000 card=0x0093106b chip=0x435314e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    class      = network
    bar   [10] = type Memory, range 64, base 0x93300000, size 16384, enabled
    cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 09[58] = vendor (length 120)
    cap 05[48] = MSI supports 1 message, 64 bit 
    cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 5bc935ffff8858b0
ecap 0004[16c] = unknown 1
bge0@pci0:4:0:0:	class=0x020000 card=0x16b414e4 chip=0x16b414e4 rev=0x00 hdr=0x00
    vendor     = 'Broadcom Corporation'
    class      = network
    subclass   = ethernet
    bar   [10] = type Prefetchable Memory, range 64, base 0x93100000, size 65536, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0x93110000, size 65536, enabled
    cap 01[48] = powerspec 3  supports D0 D3  current D0
    cap 05[58] = MSI supports 8 messages, 64 bit enabled with 1 message
    cap 11[a0] = MSI-X supports 7 messages in map 0x18
    cap 10[ac] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[13c] = Serial 1 0000c42c03080b9d
ecap 0004[150] = unknown 1
ecap 0002[160] = VC 1 max VC0
none14@pci0:4:0:1:	class=0x080501 card=0x000014e4 chip=0x16bc14e4 rev=0x00 hdr=0x00
    vendor     = 'Broadcom Corporation'
    class      = base peripheral
    subclass   = SD host controller
    bar   [10] = type Prefetchable Memory, range 64, base 0x93120000, size 65536, enabled
    cap 01[48] = powerspec 3  supports D0 D3  current D0
    cap 05[58] = MSI supports 1 message, 64 bit 
    cap 10[ac] = PCI-Express 2 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0004[150] = unknown 1
ecap 0002[160] = VC 1 max VC0
vgapci0@pci0:5:0:0:	class=0x030000 card=0x00c0106b chip=0x08a410de rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 32, base 0x92000000, size 16777216, enabled
    bar   [14] = type Prefetchable Memory, range 64, base 0x80000000, size 268435456, enabled
    bar   [1c] = type Prefetchable Memory, range 64, base 0x90000000, size 33554432, enabled
    bar   [24] = type I/O Port, range 32, base 0x1000, size 128, enabled
    cap 01[60] = powerspec 3  supports D0 D3  current D0
    cap 05[68] = MSI supports 1 message, 64 bit 
    cap 09[e0] = vendor (length 20)

--------------010401070707060509080501
Content-Type: text/plain;
 name="sysctl.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="sysctl.txt"

dev.bge.0.%desc: Broadcom unknown BCM57765, ASIC rev. 0x57785000
dev.bge.0.%driver: bge
dev.bge.0.%location: slot=0 function=0 handle=\_SB_.PCI0.RP06.GIGE
dev.bge.0.%pnpinfo: vendor=0x14e4 device=0x16b4 subvendor=0x14e4 subdevice=0x16b4 class=0x020000
dev.bge.0.%parent: pci4
dev.bge.0.forced_collapse: 0
dev.bge.0.forced_udpcsum: 0
dev.bge.0.stats.FramesDroppedDueToFilters: 0
dev.bge.0.stats.DmaWriteQueueFull: 0
dev.bge.0.stats.DmaWriteHighPriQueueFull: 0
dev.bge.0.stats.NoMoreRxBDs: 0
dev.bge.0.stats.InputDiscards: 0
dev.bge.0.stats.InputErrors: 0
dev.bge.0.stats.RecvThresholdHit: 0
dev.bge.0.stats.rx.ifHCInOctets: 4497
dev.bge.0.stats.rx.Fragments: 0
dev.bge.0.stats.rx.UnicastPkts: 21
dev.bge.0.stats.rx.MulticastPkts: 7
dev.bge.0.stats.rx.BroadcastPkts: 36
dev.bge.0.stats.rx.FCSErrors: 0
dev.bge.0.stats.rx.AlignmentErrors: 0
dev.bge.0.stats.rx.xonPauseFramesReceived: 0
dev.bge.0.stats.rx.xoffPauseFramesReceived: 0
dev.bge.0.stats.rx.ControlFramesReceived: 0
dev.bge.0.stats.rx.xoffStateEntered: 0
dev.bge.0.stats.rx.FramesTooLong: 0
dev.bge.0.stats.rx.Jabbers: 0
dev.bge.0.stats.rx.UndersizePkts: 0
dev.bge.0.stats.tx.ifHCOutOctets: 1152
dev.bge.0.stats.tx.Collisions: 0
dev.bge.0.stats.tx.XonSent: 0
dev.bge.0.stats.tx.XoffSent: 0
dev.bge.0.stats.tx.InternalMacTransmitErrors: 0
dev.bge.0.stats.tx.SingleCollisionFrames: 0
dev.bge.0.stats.tx.MultipleCollisionFrames: 0
dev.bge.0.stats.tx.DeferredTransmissions: 0
dev.bge.0.stats.tx.ExcessiveCollisions: 0
dev.bge.0.stats.tx.LateCollisions: 0
dev.bge.0.stats.tx.UnicastPkts: 0
dev.bge.0.stats.tx.MulticastPkts: 0
dev.bge.0.stats.tx.BroadcastPkts: 18
dev.bge.0.wake: 0

bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
	ether c4:2c:03:08:0b:9d
	inet 192.168.1.10 netmask 0xffffff00 broadcast 192.168.1.255
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active


--------------010401070707060509080501--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4DAEBB67.7070303>