From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 00:02:02 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 042D516A4CE for ; Sun, 9 Nov 2003 00:02:02 -0800 (PST) Received: from p1028-ipbffx02marunouchi.tokyo.ocn.ne.jp (p1028-ipbffx02marunouchi.tokyo.ocn.ne.jp [220.111.132.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id 170F243FB1 for ; Sun, 9 Nov 2003 00:02:00 -0800 (PST) (envelope-from lukek@meibin.net) Received: (qmail 85838 invoked by uid 89); 9 Nov 2003 08:01:59 -0000 Received: from unknown (HELO ?127.0.0.1?) (192.168.10.35) by 192.168.20.5 with SMTP; 9 Nov 2003 08:01:59 -0000 Date: Sun, 09 Nov 2003 17:00:54 +0900 From: Luke Kearney To: Marty Landman In-Reply-To: <6.0.0.22.0.20031109013452.01b06c50@pop.face2interface.com> References: <6.0.0.22.0.20031109013452.01b06c50@pop.face2interface.com> Message-Id: <20031109170045.8858.LUKEK@meibin.net> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Becky! ver. 2.07.01 cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 08:02:02 -0000 On Sun, 09 Nov 2003 01:57:35 -0500 Marty Landman granted us these pearls of wisdom: > I'm new to FreeBSD and have the 4.8 mini-iso installed. Have tried to > install the nic and can ping my ip and localhost ok, but when I try to ping > other boxes on my LAN get > > ping: sendto: No route to host > > An ifconfig shows ep0 UP and RUNNING; ipfw list replies Protocol not available. > > FWIW I also tried pinging the FreeBSD box from two other (Windoz) boxes on > the LAN. > Hmm take a quick peek at your routing table - chances are you have not told the machine much about your network # netstat -rn If the correct information is not there then something like # route add default -interface ep0 ( or better yet if you have a router ) # route add default 192.168.1.1 <-- where this is the address of the router If you can see the correct routing information the next likely culprit is the firewall. Try turning off the firewall for starters. HTH Lukek From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 00:10:09 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 57F5716A4CE; Sun, 9 Nov 2003 00:10:09 -0800 (PST) Received: from nezlok.unixathome.org (nezlok.unixathome.org [66.154.97.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id B67AF43FE0; Sun, 9 Nov 2003 00:10:08 -0800 (PST) (envelope-from dan@nezlok.unixathome.org) Received: from localhost (localhost [127.0.0.1]) by nezlok.unixathome.org (Postfix) with ESMTP id 74AADAE090; Sun, 9 Nov 2003 00:10:04 -0800 (PST) Received: from nezlok.unixathome.org ([127.0.0.1]) by localhost (nezlok.unixathome.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 27592-06; Sun, 9 Nov 2003 00:10:03 -0800 (PST) Received: by nezlok.unixathome.org (Postfix, from userid 1000) id 4DD5EAE081; Sun, 9 Nov 2003 00:10:01 -0800 (PST) From: Dan Langille To: freebsd-newbies@freebsd.org, freebsd-questions@freebsd.org Message-Id: <20031109081001.4DD5EAE081@nezlok.unixathome.org> Date: Sun, 9 Nov 2003 00:10:01 -0800 (PST) X-Virus-Scanned: by amavisd-new at unixathome.org Subject: The FreeBSD Diary: 2003-10-19 - 2003-11-08 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 08:10:09 -0000 The FreeBSD Diary contains a large number of practical examples and how-to guides. This message is posted weekly to freebsd-questions@freebsd.org with the aim of letting people know what's available on the website. Before you post a question here it might be a good idea to first search the mailing list archives and/or The FreeBSD Diary . -- Dan Langille - DVL Software Limited The FreeBSD Diary - http://www.FreeBSDDiary.org/ - practical examples FreshPorts - http://www.FreshPorts.org/ - the place for ports FreshSource - http://www.FreshSource.org/ - the place for source From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 00:33:27 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6948216A4CF for ; Sun, 9 Nov 2003 00:33:27 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id BC37C43FDF for ; Sun, 9 Nov 2003 00:33:26 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AIl0g-0000Iw-00 for freebsd-questions@freebsd.org; Sun, 09 Nov 2003 01:33:26 -0700 Mime-Version: 1.0 (Apple Message framework v606) Message-Id: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> To: freebsd-questions@freebsd.org From: "Chad Leigh -- Shire.Net LLC" Date: Sun, 9 Nov 2003 01:33:23 -0700 X-Mailer: Apple Mail (2.606) Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII; format=flowed X-Spam-Status: No, hits=-4.7 required=5.4 tests=BAYES_10,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) Subject: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 08:33:27 -0000 Hi I have a linux server that needs to mount my FBSD server's web volume and the linux server only has v2 support right now (and I cannot make my own kernel since this is a UML kernel distributed as part of a product) and so I would like to run a v2 compatible nfs server on my FBSD server if possible. Can I do this? How? Thanks Chad From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 00:45:17 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DC4C316A4CE for ; Sun, 9 Nov 2003 00:45:17 -0800 (PST) Received: from imf16aec.mail.bellsouth.net (imf16aec.mail.bellsouth.net [205.152.59.64]) by mx1.FreeBSD.org (Postfix) with ESMTP id 02F2E43FDF for ; Sun, 9 Nov 2003 00:45:16 -0800 (PST) (envelope-from b_cassidy@bellsouth.net) Received: from bellsouth.net ([68.214.80.201]) by imf16aec.mail.bellsouth.netSMTP <20031109084515.DUSI20018.imf16aec.mail.bellsouth.net@bellsouth.net> for ; Sun, 9 Nov 2003 03:45:15 -0500 Date: Sun, 9 Nov 2003 03:49:39 -0600 From: Bryan Cassidy To: freebsd-questions@freebsd.org Message-Id: <20031109034939.76f247b9.b_cassidy@bellsouth.net> X-Mailer: Sylpheed version 0.9.7 (GTK+ 1.2.10; i386-portbld-freebsd4.8) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: DVD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 08:45:18 -0000 Here is the output from dmesg on my DVD acd0: DVD-ROM at ata1-master PIO4 Using FreeBSD 4.8 When I play a DVD with mplayer (usually with these options) mplayer -brightness 9 -autosync 30 -dvd 1 /dev/dvd I can play the DVD without ANY problems what so ever. The problem is this. Say I just booted into FreeBSD, did a startx, loged into root and ran mplayer with those options. It will play fine and no sound problem. After a couple hours or so (using those same commands usually) I can still play the DVD but no sound. If I reboot *AFTER* the sound problem then I get the sound back. There are no other applications running at the same time to block the audio so I don't know what it could be. Other than this small problem, DVD is working pretty good so far for me under FreeBSD. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 01:07:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8793A16A4CE for ; Sun, 9 Nov 2003 01:07:13 -0800 (PST) Received: from res241015.resnet.wsu.edu (res241015.resnet.wsu.edu [134.121.241.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id A70FD43FE9 for ; Sun, 9 Nov 2003 01:07:12 -0800 (PST) (envelope-from william_devries@wsu.edu) Received: from res241015.resnet.wsu.edu (localhost [127.0.0.1]) hA995K8j029536 for ; Sun, 9 Nov 2003 01:05:20 -0800 (PST) (envelope-from william_devries@wsu.edu) Date: Sun, 9 Nov 2003 01:05:20 -0800 From: William Dean DeVries To: freebsd-questions@freebsd.org Message-ID: <20031109090520.GC25990@res241015.resnet.wsu.edu> References: <20031109034939.76f247b9.b_cassidy@bellsouth.net> Mime-Version: 1.0 Content-Type: text/plain; Format=Flowed; DelSp=Yes; charset=ISO-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20031109034939.76f247b9.b_cassidy@bellsouth.net> (from b_cassidy@bellsouth.net on Sun, Nov 09, 2003 at 01:49:39 -0800) X-Mailer: Balsa 2.0.15 Lines: 40 Subject: Re: DVD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 09:07:13 -0000 Maybe some program is starting a sound daemon, like esd or something. If you started gnome or kde or possible anything else this may be the case. You should maybe use run 'ps aux' and see what is running when the sound doesn't work. If you have a sound daemon running it should be possible to make mplayer use it. You could try 'shutdown now'(it will quit all you programs) which will drop your system into single user mode after you mplayer's sound quits and then type 'exit'. I never reboot unless I have to. If the works after- wards its probably something using the sound device. You really should't be using root for anything but maintenance(ie watching movie should probably be done as a user). --James > Here is the output from dmesg on my DVD > > acd0: DVD-ROM at ata1-master PIO4 > > Using FreeBSD 4.8 > > When I play a DVD with mplayer (usually with these options) > > mplayer -brightness 9 -autosync 30 -dvd 1 /dev/dvd > > I can play the DVD without ANY problems what so ever. The problem is > this. Say I just booted into FreeBSD, did a startx, loged into root and > ran mplayer with those options. It will play fine and no sound problem. > After a couple hours or so (using those same commands usually) I can > still play the DVD but no sound. If I reboot *AFTER* the sound problem > then I get the sound back. There are no other applications running at > the same time to block the audio so I don't know what it could be. Other > than this small problem, DVD is working pretty good so far for me under > FreeBSD. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd. > org" > > From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 02:00:01 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AFDE216A4CE for ; Sun, 9 Nov 2003 02:00:01 -0800 (PST) Received: from aaanet.ru (tmail.aaanet.ru [80.80.111.232]) by mx1.FreeBSD.org (Postfix) with ESMTP id 93E0C43F85 for ; Sun, 9 Nov 2003 02:00:00 -0800 (PST) (envelope-from haba@aaanet.ru) Received: from [80.80.113.11] (helo=ads.x10.com) by aaanet.ru with esmtp (Exim 4.20) id 1AImMC-000KiA-Hs; Sun, 09 Nov 2003 12:59:55 +0300 X-AntiVirus: Checked by Dr.Web (http://www.drweb.net) Date: Sat, 8 Nov 2003 04:34:25 +0300 From: Vladimir X-Priority: 3 (Normal) Message-ID: <572804781.20031108043425@aaanet.ru> To: Kris Kennaway In-Reply-To: <20031101210634.GA45077@rot13.obsecurity.org> References: <20031005080039.GA23414@happy-idiot-talk.infracaninophile.co.uk> <000c01c3a0b7$8eef69a0$0100000a@Biggie> <20031101210634.GA45077@rot13.obsecurity.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit cc: questions@freebsd.org Subject: Re[2]: why are theynot updated WAS Re: samba 3.0, FreeBSD 5.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Vladimir List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 10:00:01 -0000 Hello, Kris. >> Also why is such an old version of perl 5.003 still in the freebsd base when >> 5.8 is out ? KK> Because 5.8 is not backwards-compatible with 5.00503, and updating the KK> base system version would break a lot of scripts used on installed KK> FreeBSD machines. You can trivially install perl 5.8 from the ports KK> collection if you want to use it. And what about 5.6? -- Regards, Vladimir mailto:haba@aaanet.ru From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 03:28:11 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2A3EF16A4CE for ; Sun, 9 Nov 2003 03:28:11 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6AD2443FBF for ; Sun, 9 Nov 2003 03:28:09 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id D1DBC66B28; Sun, 9 Nov 2003 03:28:08 -0800 (PST) Date: Sun, 9 Nov 2003 03:28:08 -0800 From: Kris Kennaway To: kirt Message-ID: <20031109112808.GA94834@xor.obsecurity.org> References: <20031109012325.GD829@yttrium.gaultopia.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="UlVJffcvxoiEqYs2" Content-Disposition: inline In-Reply-To: <20031109012325.GD829@yttrium.gaultopia.org> User-Agent: Mutt/1.4.1i cc: freebsd-questions@freebsd.org Subject: Re: vulnerability in su? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 11:28:11 -0000 --UlVJffcvxoiEqYs2 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Nov 08, 2003 at 08:23:25PM -0500, kirt wrote: > is this a known issue? i didn't search to hard for a fix or anything sin= ce i quickly=20 > fixed it myself, but i thought that a situation like that could make for = some interesting=20 > (read *bad*) situations. It's certainly possible to compromise your system in this way if you incorrectly update your /etc (e.g. by making a mistake with mergemaster). Kris --UlVJffcvxoiEqYs2 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/riTIWry0BWjoQKURApy4AKCo5f1uccuLnLjy4rpCsmw7xCpmtwCg1Y1E Ei9Y8i5NV0ZyUc46Vw5Kues= =zVqx -----END PGP SIGNATURE----- --UlVJffcvxoiEqYs2-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 03:28:57 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E1CE316A4D0 for ; Sun, 9 Nov 2003 03:28:57 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2BAA643FCB for ; Sun, 9 Nov 2003 03:28:57 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id B921766B28; Sun, 9 Nov 2003 03:28:56 -0800 (PST) Date: Sun, 9 Nov 2003 03:28:56 -0800 From: Kris Kennaway To: "Chad Leigh -- Shire.Net LLC" Message-ID: <20031109112856.GB94834@xor.obsecurity.org> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="KFztAG8eRSV9hGtP" Content-Disposition: inline In-Reply-To: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> User-Agent: Mutt/1.4.1i cc: freebsd-questions@freebsd.org Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 11:28:58 -0000 --KFztAG8eRSV9hGtP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 09, 2003 at 01:33:23AM -0700, Chad Leigh -- Shire.Net LLC wrote: > Hi >=20 > I have a linux server that needs to mount my FBSD server's web volume=20 > and the linux server only has v2 support right now (and I cannot make=20 > my own kernel since this is a UML kernel distributed as part of a=20 > product) and so I would like to run a v2 compatible nfs server on my=20 > FBSD server if possible. Can I do this? How? Thanks Read the mount_nfs and/or nfsd manpages..the answer is right there. Kris --KFztAG8eRSV9hGtP Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/riT4Wry0BWjoQKURAnpxAKDAnafjASglQwm8kCxMsj/qQBN07ACgtl/a Ev26CI3TR3TIujJS4JGfLfo= =CYDd -----END PGP SIGNATURE----- --KFztAG8eRSV9hGtP-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 04:30:08 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3428D16A4D0 for ; Sun, 9 Nov 2003 04:30:08 -0800 (PST) Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.54]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4561743FAF for ; Sun, 9 Nov 2003 04:30:06 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp02.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO300E6I4ATP5@smtp02.wxs.nl> for freebsd-questions@freebsd.org; Sun, 09 Nov 2003 13:35:17 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.8p2/8.12.8) with ESMTP id hA9CU4Z4000704; Sun, 09 Nov 2003 13:30:04 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.8p2/8.12.8/Submit) id hA9CU3fu000701; Sun, 09 Nov 2003 13:30:03 +0100 (CET) Date: Sun, 09 Nov 2003 13:30:02 +0100 From: Alex de Kruijff In-reply-to: <200311091551.13066.malcolm.kay@internode.on.net> To: Malcolm Kay Message-id: <20031109123002.GA553@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <002001c3a64e$ca65e080$6701a8c0@tacstation> <200311091551.13066.malcolm.kay@internode.on.net> cc: Shawn Guillemette cc: freebsd-questions@freebsd.org Subject: Re: IPFW X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 12:30:08 -0000 On Sun, Nov 09, 2003 at 03:51:13PM +1030, Malcolm Kay wrote: > On Sun, 9 Nov 2003 09:49, Shawn Guillemette wrote: > > I have installed ipfw and each time the machien is rebooted I lose the > > rules I added. > > > > any thoughts? > > > > Do you mean you have added them by hand at the command lline? If you add them with this command 'ipfw add ...' then you do lose them at the reboot indeed. > I believe the norm is to have them in rc.firewall and with the appropriate > variables set in rc.conf it will all happen during the normal boot process. > (This is NOT in my area of expertise -- but you don't yet seem to have > a response from the knowledgable.) If you create your own firewall then its better to create your own file as rc.firewall can get overriden by mergemaster. One only wants to use this script if likes the default. You may wanna look at my homepage, I have a couple of articles about firewalls. Please feel free to contact me if you have trouble with it. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 04:35:40 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9512E16A4CE for ; Sun, 9 Nov 2003 04:35:40 -0800 (PST) Received: from mta9.adelphia.net (mta9.adelphia.net [68.168.78.199]) by mx1.FreeBSD.org (Postfix) with ESMTP id 60A1D43FF7 for ; Sun, 9 Nov 2003 04:35:39 -0800 (PST) (envelope-from alexkelly@adelphia.net) Received: from desktop ([24.52.113.18]) by mta9.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031109123542.FJOB23231.mta9.adelphia.net@desktop>; Sun, 9 Nov 2003 07:35:42 -0500 Message-ID: <000d01c3a6bd$fb597700$6400a8c0@desktop> From: "Alex Kelly" To: "Warren Block" References: <200311081944.48496.alexkelly@adelphia.net> <20031108205519.G12777@wonkity.com> Date: Sun, 9 Nov 2003 07:35:38 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 cc: freebsd-questions@freebsd.org Subject: Re: Newbie USB Printer Problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 12:35:40 -0000 Hi, Warren, thanks for writing. I did both of those of the suggestions, but still nothing. :( I tried CUPS also. After installation and configuration of CUPS, cupsd ran fine. But, when it attempted to print anything, the print attempts were listed as "cancelled" in the list of web-based print jobs (I did it through konqueror at localhost:631). I'm going to keep trying. :) ----- Original Message ----- From: "Warren Block" To: "Alex Kelly" Cc: Sent: Saturday, November 08, 2003 11:02 PM Subject: Re: Newbie USB Printer Problem > On Sat, 8 Nov 2003, Alex Kelly wrote: > > > I cannot get my HP Deskjet 3420 printer to work. I've read all the prior posts > > for USB printers, checked the handbook and the complete freebsd book. After > > doing so, I've come up with this... > > > > I edited printcap in /etc to look like this: > > lp|ps|local hp deskjet 3420:\ > > :lp=/dev/ulpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:sh:mx#0:\ > > :if=/usr/local/libexec/magicfilter/deskjet-filter: > > Did you create the /var/spool/output/lpd directory? Actually, you > should probably create one with the same name as the printer, since lpd > doesn't want to share directories between multiple printers. > > > I issued this command to test the printer: > > lptest > /dev/ulpt0 > > > > The printer did nothing. > > > > Any suggestions? > > That's a separate issue, since 'lptest > /dev/ulpt0' doesn't go anywhere > near lpd. Some HP printers will flash an LED when they are receiving > data, so you could look for that. Or it might be that the printer won't > print anything until it gets a form feed, so you could send it one > afterwards: > > perl -e 'print chr(12)' > /dev/ulpt0 > > -Warren Block * Rapid City, South Dakota USA > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 04:40:27 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2F30E16A4CE for ; Sun, 9 Nov 2003 04:40:27 -0800 (PST) Received: from bmyster.com (loqtis.bmyster.com [65.162.190.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1F81743F3F for ; Sun, 9 Nov 2003 04:40:24 -0800 (PST) (envelope-from shawn@guillemette.org) Received: from tacstation (66-63-96-2.metrocast.net [66.63.96.2]) by bmyster.com (8.12.9p2/8.12.10) with SMTP id hA9Cl6qj083999; Sun, 9 Nov 2003 07:47:14 -0500 (EST) Message-ID: <001501c3a6c0$277d4a80$6701a8c0@tacstation> From: "Shawn Guillemette" To: "Alex de Kruijff" , "Malcolm Kay" References: <002001c3a64e$ca65e080$6701a8c0@tacstation> <200311091551.13066.malcolm.kay@internode.on.net> <20031109123002.GA553@dds.nl> Date: Sun, 9 Nov 2003 07:51:04 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 cc: freebsd-questions@freebsd.org Subject: Re: IPFW X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 12:40:27 -0000 the rc.firewall file worked. thank you very much.. my problem was i did not have the right optinons in my rc.conf file. I just noriced that after I read your email .. it as not looking to rc.conf thanks again.. ----- Original Message ----- From: "Alex de Kruijff" To: "Malcolm Kay" Cc: "Shawn Guillemette" ; Sent: Sunday, November 09, 2003 7:30 AM Subject: Re: IPFW > On Sun, Nov 09, 2003 at 03:51:13PM +1030, Malcolm Kay wrote: > > On Sun, 9 Nov 2003 09:49, Shawn Guillemette wrote: > > > I have installed ipfw and each time the machien is rebooted I lose the > > > rules I added. > > > > > > any thoughts? > > > > > > > Do you mean you have added them by hand at the command lline? > > If you add them with this command 'ipfw add ...' then you do lose them > at the reboot indeed. > > > I believe the norm is to have them in rc.firewall and with the appropriate > > variables set in rc.conf it will all happen during the normal boot process. > > (This is NOT in my area of expertise -- but you don't yet seem to have > > a response from the knowledgable.) > > If you create your own firewall then its better to create your own file > as rc.firewall can get overriden by mergemaster. One only wants to use > this script if likes the default. > > You may wanna look at my homepage, I have a couple of articles about > firewalls. Please feel free to contact me if you have trouble with it. > > -- > Alex > > Articles based on solutions that I use: > http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ > > From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 04:43:20 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E8C4516A4CE for ; Sun, 9 Nov 2003 04:43:20 -0800 (PST) Received: from mail.devrandom.org.uk (82-68-135-38.dsl.in-addr.zen.co.uk [82.68.135.38]) by mx1.FreeBSD.org (Postfix) with ESMTP id CF76E43FBF for ; Sun, 9 Nov 2003 04:43:19 -0800 (PST) (envelope-from howells@kde.org) Received: from localhost.invalid (unknown [192.168.1.190]) by mail.devrandom.org.uk (Postfix) with ESMTP id ED7A8133AD for ; Sun, 9 Nov 2003 12:43:17 +0000 (GMT) From: Chris Howells Organization: K Desktop Environment To: freebsd-questions@Freebsd.org Date: Sun, 9 Nov 2003 12:43:12 +0000 User-Agent: KMail/1.5.93 References: <200311081944.48496.alexkelly@adelphia.net> <20031108205519.G12777@wonkity.com> <000d01c3a6bd$fb597700$6400a8c0@desktop> In-Reply-To: <000d01c3a6bd$fb597700$6400a8c0@desktop> X-GPG-Fingerprint: 5863 DF82 C34D 7291 CC63 CA1B 17C2 2ED7 3379 5A2C MIME-Version: 1.0 Content-Disposition: inline Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-Id: <200311091243.17114.howells@kde.org> Subject: Re: Newbie USB Printer Problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 12:43:21 -0000 =2D----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, On Sunday 09 November 2003 12:35, Alex Kelly wrote: > fine. But, when it attempted to print anything, the print attempts were > listed as "cancelled" in the list of web-based print jobs (I did it throu= gh > konqueror at localhos In cupsd.conf chage the logging level to debug, and run 'tail -f /var/log/ cups/error_log' -- probably something very trivial. =2D --=20 Cheers, Chris Howells -- chris@chrishowells.co.uk, howells@kde.org Web: http://chrishowells.co.uk, PGP ID: 0x33795A2C KDE/Qt/C++/PHP Developer: http://www.kde.org =2D----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rjZlF8Iu1zN5WiwRAkCEAJ9yWfvze0Kfy1QzJLR1Cqk3QuFfbwCdHCqp Po14kzWpHmRrVInfPAKaAfo=3D =3DaJQH =2D----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 04:51:03 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1E57616A4CE for ; Sun, 9 Nov 2003 04:51:03 -0800 (PST) Received: from smtp09.wxs.nl (smtp09.wxs.nl [195.121.6.38]) by mx1.FreeBSD.org (Postfix) with ESMTP id 450A944003 for ; Sun, 9 Nov 2003 04:51:01 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp09.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO300F8Q4MID8@smtp09.wxs.nl> for freebsd-questions@freebsd.org; Sun, 09 Nov 2003 13:42:19 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.8p2/8.12.8) with ESMTP id hA9CiMZ4000784; Sun, 09 Nov 2003 13:44:23 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.8p2/8.12.8/Submit) id hA9CiM7b000783; Sun, 09 Nov 2003 13:44:22 +0100 (CET) Date: Sun, 09 Nov 2003 13:44:20 +0100 From: Alex de Kruijff In-reply-to: <3FACD67B.5090807@quik.com> To: james Message-id: <20031109124420.GB553@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <3FACD67B.5090807@quik.com> cc: freebsd-questions@freebsd.org Subject: Re: how to modem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 12:51:03 -0000 On Sat, Nov 08, 2003 at 03:41:47AM -0800, james wrote: > I can't find the modem . although I did finally get kde installed > are there any simple instructions for finding your modem and > hitching up to the internet What type of modum do you have? (i.e. external/internal, plug-n-play/jumpers) Did you see it in the output of 'dmesg'? -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 04:52:23 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BEF1B16A4CE for ; Sun, 9 Nov 2003 04:52:23 -0800 (PST) Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by mx1.FreeBSD.org (Postfix) with ESMTP id CD3C94400D for ; Sun, 9 Nov 2003 04:52:22 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp03.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO3009AY515VN@smtp03.wxs.nl> for freebsd-questions@freebsd.org; Sun, 09 Nov 2003 13:51:06 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.8p2/8.12.8) with ESMTP id hA9CqKZ4000857; Sun, 09 Nov 2003 13:52:21 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.8p2/8.12.8/Submit) id hA9CqJp8000856; Sun, 09 Nov 2003 13:52:19 +0100 (CET) Date: Sun, 09 Nov 2003 13:52:18 +0100 From: Alex de Kruijff In-reply-to: <1068265748.16198.8.camel@gandalf.middle.earth> To: Augusto Jun Devegili Message-id: <20031109125218.GC553@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <1068265748.16198.8.camel@gandalf.middle.earth> cc: freebsd-questions@freebsd.org Subject: Re: Gateway traffic reporting tool (port) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 12:52:23 -0000 On Sat, Nov 08, 2003 at 02:29:08AM -0200, Augusto Jun Devegili wrote: > Hi all, > > I have a small home LAN with four machines. One of them (mine, actually) > runs FreeBSD 5.1 and serves as a NAT/gateway between the LAN and an ADSL > connection. > > I would like a tool for traffic reporting, detailing traffic information > for each LAN computer (by IP or MAC address) so that I know who uses > more bandwidth. This information should be provided on a time interval > basis (e.g., between 2 a.m. and 3 a.m., how much traffic per IP/MAC > address). If possible, I would like to know traffic from my localhost > regardless of what it is forwarding (as it is the default gateway for > the LAN, I don't know if that would be possible). > This can be done with IPA (its in the ports) in combination with IPFW. If you like graphics then you could add MRTG on top of it all. This is how it would look: http://www.kruijff.org/stats/?dir=docs/&file=IP_accounting.txt I have tree articles about how to setup this. These need to read in order. The first is about setting up a simple firewall, the second is to add IPA and the thirth is about adding MRTG. Please contact me if you have trouble with it. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 05:05:43 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 002A516A4CE for ; Sun, 9 Nov 2003 05:05:42 -0800 (PST) Received: from mta9.adelphia.net (mta9.adelphia.net [68.168.78.199]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1F54C43FB1 for ; Sun, 9 Nov 2003 05:05:42 -0800 (PST) (envelope-from alexkelly@adelphia.net) Received: from desktop ([24.52.113.18]) by mta9.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031109130545.HFRT23231.mta9.adelphia.net@desktop>; Sun, 9 Nov 2003 08:05:45 -0500 Message-ID: <001801c3a6c2$2dcbc0e0$6400a8c0@desktop> From: "Alex Kelly" To: "Chris Howells" References: <200311081944.48496.alexkelly@adelphia.net><20031108205519.G12777@wonkity.com> <000d01c3a6bd$fb597700$6400a8c0@desktop> <200311091243.17114.howells@kde.org> Date: Sun, 9 Nov 2003 08:05:41 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 cc: freebsd-questions@freebsd.org Subject: Re: Newbie USB Printer Problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 13:05:43 -0000 Thanks, Chris. I'll make the change and hopefully I'll be able to pin down the problem to something more specific. >In cupsd.conf chage the logging level to debug, and run 'tail -f /var/log/ >cups/error_log' -- probably something very trivial. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 05:17:28 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8DD2F16A4CE for ; Sun, 9 Nov 2003 05:17:28 -0800 (PST) Received: from fmx3.freemail.hu (fmx3.freemail.hu [195.228.242.223]) by mx1.FreeBSD.org (Postfix) with SMTP id 194AF44013 for ; Sun, 9 Nov 2003 05:17:27 -0800 (PST) (envelope-from gannater@freemail.hu) Received: (qmail 45838 invoked from network); 9 Nov 2003 14:17:25 +0100 Received: from fm9.freemail.hu (195.228.242.209) by fmx3.freemail.hu with SMTP; 9 Nov 2003 14:17:25 +0100 Received: (qmail 41060 invoked by uid 3644897); 9 Nov 2003 14:17:25 +0100 Date: Sun, 9 Nov 2003 14:17:25 +0100 (CET) From: =?ISO-8859-2?Q?Gannater_J=E1nos?= To: freebsd-questions@freebsd.org Message-ID: X-Originating-IP: [81.182.50.13] X-HTTP-User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-2 Subject: Something with port 53 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 13:17:28 -0000 Hello, I've posted this question to the freebsd-newbies list, but there nobody could answer it. Please help me with this qestion... I have a box with 2 IP addresses (with aliases). I usually get these error messages: Connection attempt to UDP IP_ADDR_1:1409 from IP_ADDR_2:53 What does this mean? I don't have any DNS server installed on the computer and the firewall is disabled on the system as well. etc/hosts: ::1 localhost localhost.domain.com 127.0.0.1 localhost localhost.domain.com IP_ADDR_1 www.domain.com www IP_ADDR_2 mail.domain.com mail etc/sysctl.conf net.inet.udp.blackhole=1 Thank You. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 05:18:10 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D12D516A4CE for ; Sun, 9 Nov 2003 05:18:10 -0800 (PST) Received: from hotmail.com (bay2-f99.bay2.hotmail.com [65.54.247.99]) by mx1.FreeBSD.org (Postfix) with ESMTP id 515074400E for ; Sun, 9 Nov 2003 05:18:10 -0800 (PST) (envelope-from missive@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 9 Nov 2003 05:18:10 -0800 Received: from 208.186.59.185 by by2fd.bay2.hotmail.msn.com with HTTP; Sun, 09 Nov 2003 13:18:09 GMT X-Originating-IP: [208.186.59.185] X-Originating-Email: [missive@hotmail.com] From: "Lee Harr" To: freebsd-questions@freebsd.org Date: Sun, 09 Nov 2003 13:18:09 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 09 Nov 2003 13:18:10.0040 (UTC) FILETIME=[EBBD6F80:01C3A6C3] Subject: Re: How to Handle Stale Dependencies in pkgdb -F X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 13:18:11 -0000 >>I think if it were me, I would check to see if the docbook-310 port >>were still >>installed correctly, and if not, install it and then try pkgdb -F again. > >Not sure I understanad the need to examine docbook-310. When I run >pkg_info -ro sgmlformat-1.7_2, I get the following: >Information for sgmlformat-1.7_2: > >Depends on: >Dependency: xmlcatmgr-1.1 >Dependency: iso8879-1986_2 >Dependency: jade-1.2.1_5 >Dependency: linuxdoc-1.1_1 >Dependency: docbook-4.1_2 >Dependency: docbook-4.0_2 >Dependency: docbook-3.1_2 This is from the dockbook-310 port. The _2 is the port revision. >Dependency: docbook-3.0_2 >Dependency: docbook-241_2 >Dependency: docbook-1.2_1 >Origin: >textproc/sgmlformat > >>Or, since docbook already depends on all of those other docbook >>components, >>maybe you can just point the dependency at the docbook package.... > >Do you mean that I can answer the "New dependency?" prompt with Ctrl-Del? Well... I am not using docbook, so I am not exactly sure. It looks to me like the docbook port may be a "meta port" to pull in all of those docbook versions. I am not sure if you have that one installed, or if you just have all of the pieces. Is docbook-3.0_2 still registered as installed on your system? I think that is the one it is looking for. It is possible that when upgrading one of the others, that one was removed inadvertently. _________________________________________________________________ Add photos to your messages with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 05:23:48 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C5BCB16A4CE for ; Sun, 9 Nov 2003 05:23:48 -0800 (PST) Received: from out2.smtp.messagingengine.com (out2.smtp.messagingengine.com [66.111.4.26]) by mx1.FreeBSD.org (Postfix) with ESMTP id CBC9543FE3 for ; Sun, 9 Nov 2003 05:23:46 -0800 (PST) (envelope-from judmarc@fastmail.fm) X-Sasl-enc: cwSENABS0ULbydexPPSXKA 1068384223 Received: from sparky (dialup-67.74.79.242.Dial1.Philadelphia1.Level3.net [67.74.79.242]) by mail.messagingengine.com (Postfix) with ESMTP id 675923E5F5E; Sun, 9 Nov 2003 08:23:42 -0500 (EST) To: "William Dean DeVries" , freebsd-questions@freebsd.org References: <20031109034939.76f247b9.b_cassidy@bellsouth.net> <20031109090520.GC25990@res241015.resnet.wsu.edu> Message-ID: From: Jud Content-Type: text/plain; format=flowed; delsp=yes; charset=utf-8 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Date: Sun, 09 Nov 2003 08:23:43 -0500 In-Reply-To: <20031109090520.GC25990@res241015.resnet.wsu.edu> User-Agent: Opera M2/7.30 (Win32, build 3317) Subject: Re: DVD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 13:23:48 -0000 On Sun, 9 Nov 2003 01:05:20 -0800, William Dean DeVries wrote: > Maybe some program is starting a sound daemon, like esd or > something. If you started gnome or kde or possible anything else this > may be the case. You should maybe use run 'ps aux' and see what is > running when the sound doesn't work. If you have a sound daemon running > it should be possible to make mplayer use it. > You could try 'shutdown now'(it will quit all you programs) which > will drop your system into single user mode after you mplayer's sound > quits and then type 'exit'. I never reboot unless I have to. If the > works after-wards its probably something using the sound device. You > really should't be using root for anything but maintenance(ie watching > movie should probably be done as a user). > > --James > >> Here is the output from dmesg on my DVD >> acd0: DVD-ROM at ata1-master PIO4 >> Using FreeBSD 4.8 >> When I play a DVD with mplayer (usually with these options) >> mplayer -brightness 9 -autosync 30 -dvd 1 /dev/dvd >> I can play the DVD without ANY problems what so ever. The problem is >> this. Say I just booted into FreeBSD, did a startx, loged into root and >> ran mplayer with those options. It will play fine and no sound problem. >> After a couple hours or so (using those same commands usually) I can >> still play the DVD but no sound. If I reboot *AFTER* the sound problem >> then I get the sound back. There are no other applications running at >> the same time to block the audio so I don't know what it could be. Other >> than this small problem, DVD is working pretty good so far for me under >> FreeBSD. You may get better performance from your DVD player if you include the following line in /boot/loader.conf: hw.ata.atapi_dma="1" Try it and see. If it causes a problem you can edit it out. Jud From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 05:28:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 95ED816A4CE for ; Sun, 9 Nov 2003 05:28:16 -0800 (PST) Received: from hotmail.com (bay2-f129.bay2.hotmail.com [65.54.247.129]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1EF4543FDD for ; Sun, 9 Nov 2003 05:28:16 -0800 (PST) (envelope-from missive@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 9 Nov 2003 05:28:15 -0800 Received: from 208.186.59.185 by by2fd.bay2.hotmail.msn.com with HTTP; Sun, 09 Nov 2003 13:28:15 GMT X-Originating-IP: [208.186.59.185] X-Originating-Email: [missive@hotmail.com] From: "Lee Harr" To: freebsd-questions@freebsd.org Date: Sun, 09 Nov 2003 13:28:15 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 09 Nov 2003 13:28:15.0975 (UTC) FILETIME=[54E7C770:01C3A6C5] Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 13:28:16 -0000 >I am tring to run Enemy Territory using linux emulation, and the program >fails telling my it can't find libGL.so.1. I believe I need the linux >version of this library, but I don't know where to get it. Any help would >be great. > # cat /usr/ports/graphics/linux_mesa3/pkg-plist usr/X11R6/lib/libGL.so.%%GL_MAJOR_VER%%.%%GL_MINOR_VER%%.0 usr/X11R6/lib/libGL.so.%%GL_MAJOR_VER%% usr/X11R6/lib/libGL.so [...] # cat /usr/ports/graphics/linux_glx/pkg-plist lib/libGL.so lib/libGL.so.1 [...] # cat /usr/ports/graphics/linux_dri/pkg-plist usr/X11R6/bin/gears usr/X11R6/bin/glxinfo usr/X11R6/lib/libGL.so.1 [...] I am not sure which one is the one you want.... Maybe the pkg-descr files will help you to decide. _________________________________________________________________ Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 05:39:59 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 11C1616A4CE for ; Sun, 9 Nov 2003 05:39:59 -0800 (PST) Received: from buffnet4.buffnet.net (buffnet4.buffnet.net [205.246.19.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2402744014 for ; Sun, 9 Nov 2003 05:39:58 -0800 (PST) (envelope-from shovey@buffnet.net) Received: from buffnet5.buffnet.net (buffnet5.buffnet.net [205.246.19.14]) by buffnet4.buffnet.net (8.12.8/8.8.7) with ESMTP id hA9De0WR001500; Sun, 9 Nov 2003 08:40:01 -0500 (EST) (envelope-from shovey@buffnet.net) Date: Sun, 9 Nov 2003 08:39:52 -0500 (EST) From: Steve Hovey To: =?ISO-8859-2?Q?Gannater_J=E1nos?= In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE cc: freebsd-questions@freebsd.org Subject: Re: Something with port 53 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 13:39:59 -0000 Still looks like dns attempts anyway - what is in /etc/resolv.conf on=20 iP_addr_2? On Sun, 9 Nov 2003, [ISO-8859-2] Gannater J=E1nos wrote: > Hello, >=20 > I've posted this question to the freebsd-newbies list, but there nobody= =20 > could answer it. > Please help me with this qestion... >=20 > I have a box with 2 IP addresses (with aliases). > I usually get these error messages: > Connection attempt to UDP IP_ADDR_1:1409 from IP_ADDR_2:53 > What does this mean? > I don't have any DNS server installed on the computer and the firewall=20 > is disabled on the system as well. >=20 > etc/hosts: > ::1 localhost localhost.domain.com > 127.0.0.1 localhost localhost.domain.com > IP_ADDR_1 www.domain.com www > IP_ADDR_2 mail.domain.com mail >=20 > etc/sysctl.conf > net.inet.udp.blackhole=3D1 >=20 > Thank You. >=20 >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" >=20 From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 06:00:35 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 02C8016A4CE for ; Sun, 9 Nov 2003 06:00:35 -0800 (PST) Received: from linux.tsu.tula.ru (linux.tsu.tula.ru [62.76.50.129]) by mx1.FreeBSD.org (Postfix) with ESMTP id 91B2B44001 for ; Sun, 9 Nov 2003 06:00:33 -0800 (PST) (envelope-from Sergey_Zaikov@p66.f5.klax.tsu.tula.ru) Received: from ftn by linux.tsu.tula.ru with local (Exim 3.35 #1 (Debian)) id 1AIq6s-0002Wl-00 for ; Sun, 09 Nov 2003 17:00:17 +0300 Received: from p66.f5.klax.tsu.tula.ru by p13.f5.klax.tsu.tula.ru with FTN (ifmail v.2.10.os) id AA9716; Sun, 09 Nov 2003 17:00:09 +0300 Apparently-To: Questions@freebsd.Org To: "Questions@freebsd.Org" From: Sergey Zaikov Date: Sun, 09 Nov 2003 16:44:44 +0300 Message-Id: <1068396371@p66.f5.n5022.z2.fidonet> X-FTN-Flags: PVT K/S X-FTN-Msgid: 2:5022/5.66@fidonet 3fae6f53 X-FTN-Pid: GED386 3.0.1-asa9 SR1 X-FTN-CHRS: IBMPC 2 X-FTN-Via: 2:5022/5.66@FidoNet @20031109.165054.UTC+4 T-Mail 2607.NT X-FTN-Via: 2:5022/5 FTrack 3.1/W32 09 Nov 2003 16:55:16 UTC+0300 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" X-Scanner: exiscan *1AIq6s-0002Wl-00*blq9iltLQpA* (Tula State University) Subject: Strangeness at the drive naming and numering X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 14:00:35 -0000 Hello, Questions@freebsd.Org!!! Sametimes ago I has two hard drives: Oct 30 08^34^06 acc |kernel^ ad0^ 38162MB [77536|16|63] at ata0-master UDMA33 Oct 30 08^34^06 acc |kernel^ ad1^ 38166MB [77545|16|63] at ata1-slave UDMA33 Is all correct? I think that the names must be ad0 and ad3. Later, I has connected a CD-ROM: Nov 4 13^45^14 acc |kernel^ ad0^ DMA limited to UDMA33? non-ATA66 cable or device Nov 4 13^45^14 acc |kernel^ ad0^ 38162MB [77536|16|63] at ata0-master UDMA33 Nov 4 13^45^14 acc |kernel^ ad1^ 38166MB [77545|16|63] at ata1-slave UDMA33 Nov 4 13^45^14 acc |kernel^ acd0^ CDROM at ata0-slave PIO4 Well, nothing strange. Than I try using the ATAPI/CAM Driver (according Handbook: 12.5.9 Using the ATAPI/CAM Driver). Rebuild and install new kernel. Than I see: The drive "ad1" be named as "ad3"! What I do wrong? uname -a: FreeBSD acc.acc.tula.ru 4.8-RELEASE FreeBSD 4.8-RELEASE #12: Sun Nov 9 13:24:23 MSK 2003 acc107_3@acc.acc.tula.ru:/usr/obj/usr/src/sys/Z i386 Sergey. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 06:11:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8A7B616A4CF for ; Sun, 9 Nov 2003 06:11:45 -0800 (PST) Received: from server.rucus.ru.ac.za (server.rucus.ru.ac.za [146.231.115.1]) by mx1.FreeBSD.org (Postfix) with SMTP id 4F7B643FF2 for ; Sun, 9 Nov 2003 06:11:43 -0800 (PST) (envelope-from oxo@rucus.ru.ac.za) Received: (qmail 42958 invoked from network); 9 Nov 2003 14:11:40 -0000 Received: from shell-em0.rucus.ru.ac.za (oxo@10.0.0.1) by server-em0.rucus.ru.ac.za with QMQP; 9 Nov 2003 14:11:40 -0000 Date: Sun, 9 Nov 2003 16:11:40 +0200 From: John Oxley To: questions@freebsd.org Message-ID: <20031109141140.GA7815@rucus.ru.ac.za> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.1i Subject: Bridging X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 14:11:45 -0000 Hi, my scenario is: onan (WinXP) with realtek NIC MAC address: 00:0a:cd:02:be:8d reknaw (FreeBSD 5.1-RELEASE-p10) with 2 realtek NIC's, rl0 (mac: 00:50:22:8d:f4:3f) and rl1 (mac: 00:40:f4:18:b1:0c). reknaw:rl0 has a real world ip address (foo.bar.37.150) reknaw:rl1 has no ip address onan has a real world ip address (foo.bar.37.190) There is a crossover cable from onan to reknaw:rl1. This is a two part question. Part 1. ======= I can access the rest of the world perfectly from reknaw and onan, and the rest of the world can see reknaw and onan without any trouble, but the two machines cannot see each other. When I ping reknaw from onan, and then do an arp -a, i see a dynamic entry for reknaw:rl1. When I ping onan from reknaw I get 3 packets transmitted, 0 packets received, 100% packet loss and an arp -a gives: onan.domain (foo.bar.37.190) at 00:0a:cd:02:be:8d on rl0 [ethernet] I have tried 'arp -s foo.bar.37.150 reknaw:rl0` and that does abosolutely nothing to help me. Please can someone help me get these machines talking to each other. Another thing, my bridging setup: /etc/sysctl.conf: net.link.ether.bridge=1 net.link.ether.bridge_cfg=rl1,rl0 net.link.ether.bridge_ipfw=1 /etc/rc.conf: firewall_enable="YES" firewall_type="open" defaultrouter="foo.bar.32.1" hostname="reknaw.domain" ifconfig_rl0="inet foo.bar.37.150 netmask 255.255.248.0" # there is no line for ifconfig_rl1, see next part of my question. Part 2. ======= I have an 8 port switch. Is it possible for me to give reknaw:rl1 a 192.168.0.1 address, and plug in another computer with a private ip as well, can I bridge and NAT at the same time with the one NIC, or will I need to get another NIC. TIA, -John -- /~\ The ASCII ASCII stupid question, get a EBCDIC ANSI. \ / Ribbon Campaign John Oxley X Against HTML http://oxo.rucus.net/ / \ Email! oxo rucus.ru.ac.za "Personally, I'd rather pay for my freedom than live in a bitmapped, pop-up-happy dungeon like NT." -- Thomas Scoville From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 06:26:51 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D7AEC16A4CE for ; Sun, 9 Nov 2003 06:26:51 -0800 (PST) Received: from gaultopia.org (yttrium.4ph.com [66.197.0.170]) by mx1.FreeBSD.org (Postfix) with ESMTP id E1BF843FE9 for ; Sun, 9 Nov 2003 06:26:50 -0800 (PST) (envelope-from krs@gaultopia.org) Received: (qmail 8792 invoked by uid 1009); 9 Nov 2003 14:26:48 -0000 From: krs@gaultopia.org Date: Sun, 9 Nov 2003 09:26:48 -0500 To: freebsd-questions@freebsd.org Message-ID: <20031109142648.GA2843@yttrium.gaultopia.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.4i Subject: Re: vulnerability in su? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 14:26:52 -0000 On Sat, Nov 08, 2003 at 10:49:35PM -0800, Derrick Ryalls wrote: > > > > while recently cvsup'ing my box here at home, i had a weird > > thing happen... > > > > i had already built world, built and installed the kernel, > > installed world (including all > > appropriate reboots), and when i brought it back up, but > > prior to running mergemaster, i > > popped the jumper on the circuit the box is on. my ups is > > somewhat wimpy, and only lasts > > a couple minutes (the fuse trips all the time too.. stupid > > apartment wiring can't handle > > 2 computers and the washer and dryer at once =P ) so i made > > it a priority to go ahead and > > shut the box down. after fixing said jumper and bring the > > box back up i noticed that i > > could now su like a madman, without ever being prompted for > > passwords. i then remembered > > that i hadn't run mergemaster yet, so i ran it again and > > rebooted for safe measure and su > > started asking for passwords again. > > > > I think the only time this happens is if the root password is blank. It > is possible that one of your mergemaster runs put in the default root > password (blank). > > well, it wasn't just the root password... for example i was able to login to one of my non-wheel accounts, su to my personal account (which is in wheel), and then su right to root as well. in addition, none of the passwords were actually blank, because i actually plugged a monitor and keyboard into the box and logged in locally as root, which required me to put my password in. all of my accounts did, in fact. -kirt From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 06:47:53 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A37BC16A4CE for ; Sun, 9 Nov 2003 06:47:53 -0800 (PST) Received: from grunt26.ihug.com.au (grunt26.ihug.com.au [203.109.249.146]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3E55E43FBF for ; Sun, 9 Nov 2003 06:47:52 -0800 (PST) (envelope-from arf@iweb.net.au) Received: from p163-tnt3.adl.ihug.com.au (iweb.net.au) [203.173.255.163] by grunt26.ihug.com.au with asmtp (Exim 3.35 #1 (Debian)) id 1AIqqz-00086L-00; Mon, 10 Nov 2003 01:47:50 +1100 Message-ID: <3FAE5378.1030209@iweb.net.au> Date: Mon, 10 Nov 2003 01:17:20 +1030 From: Andrew User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.5b) Gecko/20030901 Thunderbird/0.2 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 14:47:53 -0000 Hi, I have been trying to get FreeBSD 5.2 installed but i am unable to find all the packages that are required on the official cd-rom set i brought. i have tryed installing by FTP and i am still unable to find them This gouies for instant-workstation I have been following throught book "Greg Lehey The Complete FreeBSD" can sombody help clear this up for me than ks in advance Andrew From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 06:50:05 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 37E5016A4CF for ; Sun, 9 Nov 2003 06:50:05 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6D91143FF9 for ; Sun, 9 Nov 2003 06:50:04 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hA9EnVo2009510; Sun, 9 Nov 2003 09:49:35 -0500 (EST) Message-Id: <6.0.0.22.0.20031109091603.04503b68@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 09 Nov 2003 09:49:54 -0500 To: Luke Kearney From: Marty Landman In-Reply-To: <20031109170045.8858.LUKEK@meibin.net> References: <6.0.0.22.0.20031109013452.01b06c50@pop.face2interface.com> <20031109170045.8858.LUKEK@meibin.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 14:50:05 -0000 At 03:00 AM 11/9/2003, you wrote: >If the correct information is not there then something like > ># route add default -interface ep0 Ok I did this (there's no router). Now I can still ping my own ip and localhost as before and when I try pinging another node on the lan it seems to hang, i.e. PING 192.168.0.1 (192.168.0.1): 56 data bytes until ^c out of it. Ok so I let it sit like that for a couple of minutes and after interrupting it got back 600 packets transmitted, 0 packets received, 100% packet loss >If you can see the correct routing information the next likely culprit >is the firewall. Try turning off the firewall for starters. #ipfw disable firewall #ping 192.168.0.1 ^C 7 packets transmitted, 0 packets received, 100% packet loss # Hmm, any other ideas? Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 06:54:58 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9B39016A4CE for ; Sun, 9 Nov 2003 06:54:58 -0800 (PST) Received: from p1028-ipbffx02marunouchi.tokyo.ocn.ne.jp (p1028-ipbffx02marunouchi.tokyo.ocn.ne.jp [220.111.132.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id 037A543FDF for ; Sun, 9 Nov 2003 06:54:56 -0800 (PST) (envelope-from lukek@meibin.net) Received: (qmail 87473 invoked by uid 89); 9 Nov 2003 14:54:55 -0000 Received: from unknown (HELO ?127.0.0.1?) (192.168.10.35) by 192.168.20.5 with SMTP; 9 Nov 2003 14:54:55 -0000 Date: Sun, 09 Nov 2003 23:53:45 +0900 From: Luke Kearney To: Marty Landman In-Reply-To: <6.0.0.22.0.20031109091603.04503b68@pop.face2interface.com> References: <20031109170045.8858.LUKEK@meibin.net> <6.0.0.22.0.20031109091603.04503b68@pop.face2interface.com> Message-Id: <20031109235155.8861.LUKEK@meibin.net> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Becky! ver. 2.07.01 cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 14:54:58 -0000 On Sun, 09 Nov 2003 09:49:54 -0500 Marty Landman granted us these pearls of wisdom: > At 03:00 AM 11/9/2003, you wrote: > > >If the correct information is not there then something like > > > ># route add default -interface ep0 > > Ok I did this (there's no router). Now I can still ping my own ip and > localhost as before and when I try pinging another node on the lan it seems > to hang, i.e. > > PING 192.168.0.1 (192.168.0.1): 56 data bytes > > until ^c out of it. > > Ok so I let it sit like that for a couple of minutes and after interrupting > it got back > > 600 packets transmitted, 0 packets received, 100% packet loss > > >If you can see the correct routing information the next likely culprit > >is the firewall. Try turning off the firewall for starters. > > #ipfw disable firewall > #ping 192.168.0.1 > ^C > 7 packets transmitted, 0 packets received, 100% packet loss > # > > Hmm, any other ideas? > > Marty Landman Face 2 Interface Inc 845-679-9387 > Sign On Required: Web membership software for your site > Make a Website: http://face2interface.com/Home/Demo.shtml please make a rough ascii sketch of your network and post the output to the following :- netstat -rn ifconfig -a in your rc.conf firewall_enable="yes" HTH LukeK From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 07:03:51 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8422E16A4CE for ; Sun, 9 Nov 2003 07:03:51 -0800 (PST) Received: from fmx4.freemail.hu (fmx4.freemail.hu [195.228.242.224]) by mx1.FreeBSD.org (Postfix) with SMTP id C540C43FF2 for ; Sun, 9 Nov 2003 07:03:49 -0800 (PST) (envelope-from gannater@freemail.hu) Received: (qmail 30610 invoked from network); 9 Nov 2003 16:01:07 +0100 Received: from fm3.freemail.hu (195.228.242.203) by fmx4.freemail.hu with SMTP; 9 Nov 2003 16:01:07 +0100 Received: (qmail 96314 invoked by uid 3644897); 9 Nov 2003 16:03:48 +0100 Date: Sun, 9 Nov 2003 16:03:48 +0100 (CET) From: =?ISO-8859-2?Q?Gannater_J=E1nos?= To: freebsd-questions@freebsd.org Message-ID: X-Originating-IP: [81.182.50.90] X-HTTP-User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=ISO-8859-2 Content-Transfer-Encoding: QUOTED-PRINTABLE Subject: Re: Something with port 53 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 15:03:51 -0000 Hello > Gannater_J=E1nos > did u set /etc/resolv.conf ok ?? /etc/resolv.conf domain domain.com namserver NS_ADDR_1 nameserver NS_ADDR_2 Oups. Maybe about the "namserver" thing? But the other one works... > and if your www service is working under jail ?? No jail... >=20 > >Hello, > > > >I've posted this question to the freebsd-newbies list, but there=20 nobody > >could answer it. > >Please help me with this qestion... > > > >I have a box with 2 IP addresses (with aliases). > >I usually get these error messages: > >Connection attempt to UDP IP_ADDR_1:1409 from IP_ADDR_2:53 > >What does this mean? > >I don't have any DNS server installed on the computer and the=20 firewall > >is disabled on the system as well. > > > >etc/hosts: > >::1 localhost localhost.domain.com > >127.0.0.1 localhost localhost.domain.com > >IP_ADDR_1 www.domain.com www > >IP_ADDR_2 mail.domain.com mail > > > >etc/sysctl.conf > >net.inet.udp.blackhole=3D1 > > > >Thank You. > > > > > >_______________________________________________ > >freebsd-questions@freebsd.org mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >To unsubscribe, send any mail to "freebsd-questions- unsubscribe@freebsd.org" >=20 > =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D = =3D =3D From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 07:26:09 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F0FE116A4CE for ; Sun, 9 Nov 2003 07:26:09 -0800 (PST) Received: from mail.liwing.de (mail.liwing.de [213.70.188.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0BF8443F85 for ; Sun, 9 Nov 2003 07:26:08 -0800 (PST) (envelope-from rehsack@liwing.de) Received: (qmail 75821 invoked from network); 9 Nov 2003 15:26:06 -0000 Received: from stingray.liwing.de (HELO liwing.de) ([213.70.188.164]) (envelope-sender ) by mail.liwing.de (qmail-ldap-1.03) with SMTP for ; 9 Nov 2003 15:26:06 -0000 Message-ID: <3FAE5C8E.3000709@liwing.de> Date: Sun, 09 Nov 2003 15:26:06 +0000 From: Jens Rehsack User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031102 X-Accept-Language: de-de, de, en-us, en MIME-Version: 1.0 To: Vladimir References: <1225931937.20031025184822@aaanet.ru> <3F9AA3D8.9000303@liwing.de> <5714575171.20031026145709@aaanet.ru> <3F9BBE2D.2040402@liwing.de> <1245107859.20031027122032@aaanet.ru> <3F9CE69B.1040501@liwing.de> <863427343.20031027191934@aaanet.ru> <3F9D9E9B.2010808@liwing.de> <16018225140.20031109164812@aaanet.ru> In-Reply-To: <16018225140.20031109164812@aaanet.ru> Content-Type: multipart/mixed; boundary="------------050102030102040304020002" cc: questions@freebsd.org Subject: Re: Bind 9.2.3rc4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 15:26:10 -0000 This is a multi-part message in MIME format. --------------050102030102040304020002 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Vladimir wrote: > Hi, Jens. > > > >>>I now attach my config file with zones and log files. >>>At 19:13 i have started named. >>> >>>At 19:15 "dig 127.0.0.1" > > > JR> I'm busy for next 2 days. I'll prove it on Thursday if it's not to > JR> late for you, ok? > > And where are you? Sorry, I've been very busy in last weeks. But you're right, I promised to help - I'm a bad guy :-( Ok, I saved you cfg's into orig/, copied them into a new/ directory and simplified it most I could. The diff is attached. Would you please try whether it works so far? Best regards and really sorry about the delay, Jens --------------050102030102040304020002 Content-Type: text/plain; name="simple.diff" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="simple.diff" diff -u orig/localhost.db new/localhost.db --- orig/localhost.db Sun Nov 9 15:14:50 2003 +++ new/localhost.db Sun Nov 9 15:20:44 2003 @@ -1,6 +1,4 @@ - $TTL 1D - localhost. IN SOA ns.habanet.local. hostmaster.habanet.local. ( 2003091501 ;serial number 86400 ;refresh @@ -9,5 +7,5 @@ 3600 ;minimum ) -localhost. IN NS ns.habanet.local. + IN NS @ localhost. IN A 127.0.0.1 diff -u orig/localhost.rev new/localhost.rev --- orig/localhost.rev Sun Nov 9 15:14:50 2003 +++ new/localhost.rev Sun Nov 9 15:21:31 2003 @@ -14,5 +14,5 @@ 3888000 ; Expire 3600 ; Minimum ) - IN NS ns.habanet.local. -1 IN PTR localhost.habanet.local. + IN NS localhost. +1 IN PTR localhost. diff -u orig/named.conf new/named.conf --- orig/named.conf Sun Nov 9 15:14:50 2003 +++ new/named.conf Sun Nov 9 15:19:22 2003 @@ -1,51 +1,18 @@ options { directory "/etc/namedb"; pid-file "/etc/namedb/named.pid"; - allow-recursion { 192.168.1.0/24; 127.0.0.1;}; - allow-query { 192.168.1.0/24; 127.0.0.1;}; - version "unknow"; + // allow-recursion { 192.168.1.0/24; 127.0.0.1;}; + // allow-query { 192.168.1.0/24; 127.0.0.1;}; + // version "unknow"; forwarders { 80.80.111.254; 80.80.111.244; }; - query-source address * port 53; + // Sure that nslookup binds to port 53? + // query-source address * port 53; dump-file "/var/tmp/named_dump.db"; }; -controls {}; - -key DHCP_UPDATER { - algorithm *** :-); - secret **** :-); -}; - -logging { - channel update_debug { - file "/var/log/named-update.log"; - severity debug 5; - print-category yes; - print-severity yes; - print-time yes; - }; - channel security_info { - file "/var/log/named-auth.log"; - severity info; - print-category yes; - print-severity yes; - print-time yes; - }; - channel example_debug { - file "/var/log/named-debug.log"; - severity debug 5; - print-category yes; - print-severity yes; - print-time yes; - }; - category default { example_debug; }; - category update { update_debug; }; - category security { security_info; }; -}; - zone "." { type hint; file "named.root"; @@ -67,7 +34,7 @@ type master; file "habanet.local.db"; // allow-query { 192.168.1.0/24; 127.0.0.1;}; - allow-update { key DHCP_UPDATER; }; +// allow-update { key DHCP_UPDATER; }; // allow-transfer {192.168.1.4;}; // notify no; }; @@ -76,7 +43,7 @@ type master; file "192.168.1.db"; // allow-query { 192.168.1.0/24; 127.0.0.1;}; - allow-update { key DHCP_UPDATER; }; +// allow-update { key DHCP_UPDATER; }; // allow-transfer {192.168.1.4;}; }; --------------050102030102040304020002-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 07:37:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D071016A4CE for ; Sun, 9 Nov 2003 07:37:16 -0800 (PST) Received: from claygirl.org (dsl3-63-249-66-30.cruzio.com [63.249.66.30]) by mx1.FreeBSD.org (Postfix) with ESMTP id F2A0743FCB for ; Sun, 9 Nov 2003 07:37:15 -0800 (PST) (envelope-from yussef@claygirl.org) Received: from [192.168.1.3] (helo=benedict.claygirl.org) by claygirl.org with smtp (Exim 4.24; FreeBSD 4.8) id 1AIrcn-0007Oc-MQ for questions@freebsd.org; Sun, 09 Nov 2003 07:37:13 -0800 Date: Sun, 9 Nov 2003 07:37:42 -0800 From: yussef To: questions@freebsd.org Message-Id: <20031109073742.07c8338b.yussef@claygirl.org> X-Mailer: Sylpheed version 0.9.6 (GTK+ 1.2.10; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: suggestions on new dvd burner X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 15:37:16 -0000 I'm looking to purchase a dvd burner for my desktop [currently running 5.1-release]. My uses for the drive would be copying dvd movies as well as archiving system data. I was looking at the pioneer dvr-106 drive. However, from what ive been reading in forums and mailing lists, it seems like the pioneers dont always play too nicely under fbsd. anyone care to confirm or deny this? Any recommendations on dual format dvd burners and experienced burning on fbsd is much appreciated. Thanks yussef From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 07:56:01 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C60E416A4CF for ; Sun, 9 Nov 2003 07:56:01 -0800 (PST) Received: from server.zaleo.homeunix.net (fia99-99.dsl.hccnet.nl [62.251.99.99]) by mx1.FreeBSD.org (Postfix) with ESMTP id AF42743FE3 for ; Sun, 9 Nov 2003 07:55:58 -0800 (PST) (envelope-from FreeBSD@Zaleo.nl) Received: from zeo.Zaleo.nl (zeo [192.168.0.2] (may be forged)) hA9FtIup002518; Sun, 9 Nov 2003 16:55:19 +0100 (CET) (envelope-from FreeBSD@Zaleo.nl) Message-Id: <6.0.0.22.2.20031109160320.0334ca90@pop3.zaleo.homeunix.net> X-Sender: freebsd@pop3.zaleo.homeunix.net (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 09 Nov 2003 16:37:23 +0100 To: freebsd-questions@freebsd.org From: FreeBSD-Lis In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1"; format=flowed Content-Transfer-Encoding: quoted-printable cc: silent slim cc: Zeo@Zaleo.homeunix.net Subject: Re: lan bandwidth issue X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 15:56:01 -0000 X-List-Received-Date: Sun, 09 Nov 2003 15:56:01 -0000 I think we have the same issue.... Working on this problem for months now and I can't find the problem. I also= =20 used the FreeBSD as a NATd server for my ADSL(tun0) connection. I have some other server demons running, but switching them off gives no=20 positive effect on the upload speed (average it's 10 times slower than= upload). When I disconnect the Internet the problem isn't solved, so it's not a=20 lookup loop. Problem is not solved by setting all NIC's to 10 of half= duplex. This problem accurse with NFS, Samba and FTP so it's not a configuration of= =20 these demons. Please replace the Reltek card, because a realtek chip-set based NIC will=20 over preform on a FreeBSD box, courses connection losses and wrong auto=20 media detections. However I have exactly the same problem using a 3Com for my LAN connection: # ifconfig xl0 xl0: flags=3D8843 mtu 1500 options=3D3 inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:04:75:98:d6:bd media: Ethernet 100baseTX status: active Have tested my HDD speed but this is good (12MB/Sec read and 9MB/Sec write,= =20 random). This is genarated with tcpdump during a heavy upload (500MB), I don't have= =20 a clue what it means but maybe somebody can have a look at this. # tcpdump xl0 10:38:10.760321 server.zaleo.homeunix.net.netbios-ssn > zeo.1029: . ack=20 3156635 win 65535 (DF) 10:38:10.760751 zeo.1029 > server.zaleo.homeunix.net.netbios-ssn: .=20 3158095:3159555(1460) ack 6883 win 63781NBT Packet (DF) More information about my system is found on Http://info.zaleo.homeunix.net= =20 (PhpSysInfo) As you can see a lot of "err" on this device only when I upload to the=20 FreeBSD-Box, strangely there are no collisions on the network and I have=20 tried a direct twisted pair connection. If you need more specific information please let me know, we are really=20 desperate to solve this problem. At 21:13 4-11-2003, silent slim wrote: >This has gotta be a software issue... it seems logically impossible for >it to be otherwise. I have my windows box running off a nat on my fbsd >box, it transmits to my isp at a max of about 160k down 70k up. >Transfering files between the two boxes can be done at a max of 1.6M down >and 130k up. Hense its physcially impossible for it to be a hardware >problem. This is all quite annoying as both boxes are connected by >http://www.startech.com/ststore/itemdetail.cfm?tab=3Db&ProductID=3DST100S&t= opbar=3Dtopbara.htm >10/100 nics and a 50' crossover cable. Anyone have any ideas on what is >causing this issue and how it could possibly be resolved? > >Here is the output from ifconfig on the bsd box: >rl0: flags=3D8843 mtu 1500 > inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 > inet6 fe80::250:fcff:fe71:a11b%rl0 prefixlen 64 scopeid 0x1 > ether 00:50:fc:71:a1:1b > media: Ethernet 100baseTX > status: active >rl1: flags=3D8843 mtu 1500 > inet6 fe80::250:bfff:fe17:63a2%rl1 prefixlen 64 scopeid 0x2 > inet 142.59.160.131 netmask 0xfffff800 broadcast 142.59.167.255 > ether 00:50:bf:17:63:a2 > media: Ethernet autoselect (10baseT/UTP) > status: active >lp0: flags=3D8810 mtu 1500 >lo0: flags=3D8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > inet 127.0.0.1 netmask 0xff000000 >ppp0: flags=3D8010 mtu 1500 >sl0: flags=3Dc010 mtu 552 >faith0: flags=3D8002 mtu 1500 > >And here is the output from ipconfig /all on the the win box: >Windows IP Configuration > > Host Name . . . . . . . . . . . . : FAMILY > Primary Dns Suffix . . . . . . . : > Node Type . . . . . . . . . . . . : Unknown > IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : No > >Ethernet adapter Local Area Connection: > > Connection-specific DNS Suffix . : > Description . . . . . . . . . . . : Realtek RTL8139 Family PCI=20 > Fast Ethernet NIC > Physical Address. . . . . . . . . : 00-50-FC-71-A1-31 > Dhcp Enabled. . . . . . . . . . . : No > IP Address. . . . . . . . . . . . : 192.168.0.2 > Subnet Mask . . . . . . . . . . . : 255.255.255.0 > Default Gateway . . . . . . . . . : 192.168.0.1 > DNS Servers . . . . . . . . . . . : 209.115.131.51 > 209.115.152.150 > 216.123.198.243 > 209.115.152.130 > >Thanks, >ryan > >_________________________________________________________________ >The new MSN 8: smart spam protection and 2 months FREE* >http://join.msn.com/?page=3Dfeatures/junkmail >http://join.msn.com/?page=3Ddept/bcomm&pgmarket=3Den-ca&RU=3Dhttp%3a%2f%2fj= oin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to= "freebsd-questions-unsubscribe@freebsd.org" > -- Zeo Smeijsters http://www.zaleo.homeunix.net/ http://www.zaleo.nl.=20 From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 07:56:01 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DDB0816A4D0 for ; Sun, 9 Nov 2003 07:56:01 -0800 (PST) Received: from server.zaleo.homeunix.net (fia99-99.dsl.hccnet.nl [62.251.99.99]) by mx1.FreeBSD.org (Postfix) with ESMTP id B178B43FE5 for ; Sun, 9 Nov 2003 07:55:58 -0800 (PST) (envelope-from FreeBSD@Zaleo.nl) Received: from zeo.Zaleo.nl (zeo [192.168.0.2] (may be forged)) hA9FtIuq002518; Sun, 9 Nov 2003 16:55:19 +0100 (CET) (envelope-from FreeBSD@Zaleo.nl) Message-Id: <6.0.0.22.2.20031109165212.033998e0@pop3.zaleo.homeunix.net> X-Sender: freebsd@pop3.zaleo.homeunix.net (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 09 Nov 2003 16:55:55 +0100 To: freebsd-questions@freebsd.org From: FreeBSD-Lis Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1"; format=flowed Content-Transfer-Encoding: quoted-printable cc: silent slim cc: Zeo@Zaleo.homeunix.net Subject: Re: lan bandwidth issue X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 15:56:02 -0000 I think we have the same issue.... Working on this problem for months now and I can't find the problem. I also= =20 used the FreeBSD as a NATd server for my ADSL(tun0) connection. I have some other server demons running, but switching them off gives no=20 positive effect on the upload speed (average it's 10 times slower than= down). When I disconnect the Internet the problem isn't solved, so it's not a=20 lookup loop. Problem is not solved by setting all NIC's to 10 or half= duplex. This problem accurse with NFS, Samba and FTP so it's not a configuration of= =20 these demons. Please replace the Reltek card, because a realtek chip-set based NIC will=20 over preform on a FreeBSD box, courses connection losses and wrong media=20 detections. However I have exactly the same problem using a 3Com for my LAN connection: # ifconfig xl0 xl0: flags=3D8843 mtu 1500 options=3D3 inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:04:75:98:d6:bd media: Ethernet 100baseTX status: active Have tested my HDD speed but this is good (12MB/Sec read and 9MB/Sec write,= =20 random). This is generated with tcpdump during a heavy upload (500MB), I don't have= =20 a clue what it means but maybe somebody can have a look at this. # tcpdump xl0 10:38:10.760321 server.zaleo.homeunix.net.netbios-ssn > zeo.1029: . ack=20 3156635 win 65535 (DF) 10:38:10.760751 zeo.1029 > server.zaleo.homeunix.net.netbios-ssn: .=20 3158095:3159555(1460) ack 6883 win 63781NBT Packet (DF) More information about the system is found on=20 Http://info.zaleo.homeunix.net (PhpSysInfo) As you can see a lot of "err" on this device only when I upload to the=20 FreeBSD-Box, strangely there are no collisions on the network and I have=20 also tried a direct twisted pair connection. If you need more specific information please let me know, we are really=20 desperate to solve this performance problem. At 21:13 4-11-2003, silent slim wrote: >This has gotta be a software issue... it seems logically impossible for >it to be otherwise. I have my windows box running off a nat on my fbsd >box, it transmits to my isp at a max of about 160k down 70k up. >Transfering files between the two boxes can be done at a max of 1.6M down >and 130k up. Hense its physcially impossible for it to be a hardware >problem. This is all quite annoying as both boxes are connected by >http://www.startech.com/ststore/itemdetail.cfm?tab=3Db&ProductID=3DST100S&t= opbar=3Dtopbara.htm >10/100 nics and a 50' crossover cable. Anyone have any ideas on what is >causing this issue and how it could possibly be resolved? > >Here is the output from ifconfig on the bsd box: >rl0: flags=3D8843 mtu 1500 > inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 > inet6 fe80::250:fcff:fe71:a11b%rl0 prefixlen 64 scopeid 0x1 > ether 00:50:fc:71:a1:1b > media: Ethernet 100baseTX > status: active >rl1: flags=3D8843 mtu 1500 > inet6 fe80::250:bfff:fe17:63a2%rl1 prefixlen 64 scopeid 0x2 > inet 142.59.160.131 netmask 0xfffff800 broadcast 142.59.167.255 > ether 00:50:bf:17:63:a2 > media: Ethernet autoselect (10baseT/UTP) > status: active >lp0: flags=3D8810 mtu 1500 >lo0: flags=3D8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > inet 127.0.0.1 netmask 0xff000000 >ppp0: flags=3D8010 mtu 1500 >sl0: flags=3Dc010 mtu 552 >faith0: flags=3D8002 mtu 1500 > >And here is the output from ipconfig /all on the the win box: >Windows IP Configuration > > Host Name . . . . . . . . . . . . : FAMILY > Primary Dns Suffix . . . . . . . : > Node Type . . . . . . . . . . . . : Unknown > IP Routing Enabled. . . . . . . . : No > WINS Proxy Enabled. . . . . . . . : No > >Ethernet adapter Local Area Connection: > > Connection-specific DNS Suffix . : > Description . . . . . . . . . . . : Realtek RTL8139 Family PCI=20 > Fast Ethernet NIC > Physical Address. . . . . . . . . : 00-50-FC-71-A1-31 > Dhcp Enabled. . . . . . . . . . . : No > IP Address. . . . . . . . . . . . : 192.168.0.2 > Subnet Mask . . . . . . . . . . . : 255.255.255.0 > Default Gateway . . . . . . . . . : 192.168.0.1 > DNS Servers . . . . . . . . . . . : 209.115.131.51 > 209.115.152.150 > 216.123.198.243 > 209.115.152.130 > >Thanks, >ryan > >_________________________________________________________________ >The new MSN 8: smart spam protection and 2 months FREE* >http://join.msn.com/?page=3Dfeatures/junkmail >http://join.msn.com/?page=3Ddept/bcomm&pgmarket=3Den-ca&RU=3Dhttp%3a%2f%2fj= oin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to= "freebsd-questions-unsubscribe@freebsd.org" -- Zeo Smeijsters http://www.zaleo.homeunix.net/ http://www.zaleo.nl. =20 From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 07:56:27 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 015EE16A4CF for ; Sun, 9 Nov 2003 07:56:27 -0800 (PST) Received: from smtp1.libero.it (smtp1.libero.it [193.70.192.51]) by mx1.FreeBSD.org (Postfix) with ESMTP id BFE8A43FE0 for ; Sun, 9 Nov 2003 07:56:25 -0800 (PST) (envelope-from ml.ventu@flashnet.it) Received: from soth.ventu (151.37.31.224) by smtp1.libero.it (7.0.020-DD01) id 3F6F0E4800FBF21D for freebsd-questions@freebsd.org; Sun, 9 Nov 2003 16:56:50 +0100 Received: from mailer (xanatar.ventu [10.1.2.6]) by soth.ventu (8.12.6p3/8.12.6) with SMTP id hA9FuNu1005990 for ; Sun, 9 Nov 2003 16:56:23 +0100 (CET) (envelope-from ml.ventu@flashnet.it) Message-Id: <200311091556.hA9FuNu1005990@soth.ventu> To: freebsd-questions@freebsd.org Priority: Normal X-Mailer: Post Road Mailer for OS/2 (Green Edition Ver 3.0) Date: Sun, 9 Nov 2003 16:56:23 EST From: Andrea Venturoli Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Andrea Venturoli List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 15:56:27 -0000 ** Reply to note from "Lee Harr" Sun, 09 Nov 2003 13:28:15 +0000 > >I am tring to run Enemy Territory using linux emulation, and the program > >fails telling my it can't find libGL.so.1. I believe I need the linux > >version of this library, but I don't know where to get it. Any help would > >be great. I installed linux_mesa and that problem went away, but game does not start anyway, since it's having some problems with glide (I don't have the message at hand right now). I searched the newsgroups/mailing lists and someone already asked about that, but received no answer. Keep me informed, please, if you get any further. bye av. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 08:04:48 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1A68A16A4CE for ; Sun, 9 Nov 2003 08:04:48 -0800 (PST) Received: from dhumketu.homeunix.net (dialpool-210-214-64-173.maa.sify.net [210.214.64.173]) by mx1.FreeBSD.org (Postfix) with SMTP id D638043F3F for ; Sun, 9 Nov 2003 08:04:36 -0800 (PST) (envelope-from fbsd@dhumketu.cjb.net) Received: (qmail 776 invoked by uid 1000); 8 Nov 2003 18:21:08 -0000 Date: Sat, 8 Nov 2003 23:51:08 +0530 From: Shantanoo Mahajan To: Peter Elsner Message-ID: <20031108182108.GA729@dhumketu.homeunix.net> Mail-Followup-To: Peter Elsner , freebsd-questions@freebsd.org References: <6.0.0.22.2.20031107155408.01b58678@mail.sri-software.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <6.0.0.22.2.20031107155408.01b58678@mail.sri-software.com> User-Agent: Mutt/1.4i Organization: Hmmm... I dunno X-OS: FreeBSD 4.9-RC i386 cc: freebsd-questions@freebsd.org Subject: Re: Perl and OpenWebMail question... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 16:04:48 -0000 X-List-Received-Date: Sun, 09 Nov 2003 16:04:48 -0000 +++ Peter Elsner [freebsd] [07-11-03 16:03 -0600]: | Hi list... | | I've been using OpenWebMail with Perl 5.8.0 for some time now. Recently | updated ports | using port upgrade, and now my Perl version is 5.8.1. | | chuck:root # perl -v | | This is perl, v5.8.1 built for i386-freebsd | | --snip-- | | chuck:root # | | After that, OpenWebMail stopped working... I noticed also that my | portupgrade updated | OpenWebMail as well, (it was 2.10 and is now 2.20). Okay, I thought no | problem, I'll | just do a "make deinstall" and "make reinstall". But it fails with the | following error message | each and every time... | | ... | | ===> openwebmail-2.20 depends on file: | /usr/local/lib/perl5/site_perl/5.8.1/ma | ch/Text/Iconv.pm - found | ===> openwebmail-2.20 depends on file: | /usr/local/lib/perl5/site_perl/5.8.1/ma | ch/MIME/Base64.pm - found | ===> openwebmail-2.20 depends on executable: speedy_suid - found | ===> Generating temporary packing list | ===> Checking if mail/openwebmail already installed | 12602 blocks | 19199 blocks | Can't locate warnings/register.pm in @INC (@INC contains: | /usr/local/lib/perl5/s | ite_perl/5.8.0/mach /usr/local/lib/perl5/site_perl/5.8.0 | /usr/local/lib/perl5/si | te_perl /usr/local/lib/perl5/5.8.0/BSDPAN /usr/local/lib/perl5/5.8.0/mach | /usr/l | ocal/lib/perl5/5.8.0) at /usr/local/lib/perl5/site_perl/5.8.0/mach/vars.pm line | 7. | BEGIN failed--compilation aborted at | /usr/local/lib/perl5/site_perl/5.8.0/mach/v | ars.pm line 7. | Compilation failed in require at /dev/fd/9 line 8. | BEGIN failed--compilation aborted at /dev/fd/9 line 8. | speedy_backend[46985]: perl_parse error | speedy[46983]: Cannot spawn backend process | *** Error code 1 | | Stop in /usr/ports/mail/openwebmail. | chuck:root # | | So the first few dependent modules are found in the correct locations | (/usr/local/lib/perl5/site_perl/5.8.1/mach ... etc... | | But register.pm and vars.pm are being located in 5.8.0.... | | I thought that since I'm no longer using 5.8.0, it shouldn't be looking | there, it | should be looking in 5.8.1 But it's not. | | Does anyone have any idea's as to why this is doing this? And how I can | go about fixing it? | | Thanks in advance.. | | Peter Elsner | | Oh by the way, I'm running 4.9-STABLE #7. | | | | | | Peter Elsner - President | peter@sri-software.com | SRI Software | 726 Dalworth Suite 1007 | Grand Prairie, TX. 75050 | 972-266-8870 - Voice | 817-887-1609 - Fax | www.sri-software.com | | Service Plus(tm) | Public Warehouse Management Software | -------------- next part -------------- what's the output of # ls -l `which suidperl` permissions should be 4555. -r-sr-xr-x 3 root wheel 50816 Oct 29 03:26 /usr/bin/suidperl* From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 08:04:52 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EFEDA16A4CE for ; Sun, 9 Nov 2003 08:04:52 -0800 (PST) Received: from dhumketu.homeunix.net (dialpool-210-214-64-173.maa.sify.net [210.214.64.173]) by mx1.FreeBSD.org (Postfix) with SMTP id D8A4C43F85 for ; Sun, 9 Nov 2003 08:04:36 -0800 (PST) (envelope-from freebsd@dhumketu.cjb.net) Received: (qmail 750 invoked by uid 1000); 9 Nov 2003 07:12:08 -0000 Date: Sun, 9 Nov 2003 12:42:08 +0530 From: Shantanoo Mahajan To: Shawn Guillemette Message-ID: <20031109071208.GA713@dhumketu.homeunix.net> Mail-Followup-To: Shawn Guillemette , freebsd-questions@freebsd.org References: <002001c3a64e$ca65e080$6701a8c0@tacstation> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <002001c3a64e$ca65e080$6701a8c0@tacstation> User-Agent: Mutt/1.4i Organization: Hmmm... I dunno X-OS: FreeBSD 4.9-RC i386 cc: freebsd-questions@freebsd.org Subject: Re: IPFW X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 16:04:53 -0000 +++ Shawn Guillemette [freebsd] [08-11-03 18:19 -0500]: | I have installed ipfw and each time the machien is rebooted I lose the rules I added. | | any thoughts? | | | in rc.conf put the following line firewall_enable="YES" firewall_script="path_to_your_firewall_rules" Regards, Shantanoo From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 08:14:09 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7ACF416A4CE for ; Sun, 9 Nov 2003 08:14:09 -0800 (PST) Received: from harrier.mail.pas.earthlink.net (harrier.mail.pas.earthlink.net [207.217.120.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9B73843FFD for ; Sun, 9 Nov 2003 08:14:08 -0800 (PST) (envelope-from rperry4@earthlink.net) Received: from dialup-171.75.72.64.dial1.weehawken.level3.net ([171.75.72.64] helo=earthlink.net) by harrier.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 1AIsCV-0003M6-00; Sun, 09 Nov 2003 08:14:07 -0800 Message-ID: <3FAE688B.8010005@earthlink.net> Date: Sun, 09 Nov 2003 11:17:15 -0500 From: "Robert H. Perry" User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031028 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Lee Harr References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: How to Handle Stale Dependencies in pkgdb -F X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 16:14:09 -0000 Lee Harr wrote: >> pkg_info -ro sgmlformat-1.7_2, I get the following: >> Information for sgmlformat-1.7_2: >> >> Depends on: >> Dependency: xmlcatmgr-1.1 >> Dependency: iso8879-1986_2 >> Dependency: jade-1.2.1_5 >> Dependency: linuxdoc-1.1_1 >> Dependency: docbook-4.1_2 >> Dependency: docbook-4.0_2 >> Dependency: docbook-3.1_2 > > > This is from the dockbook-310 port. The _2 is the port revision. > >> Dependency: docbook-3.0_2 >> Dependency: docbook-241_2 >> Dependency: docbook-1.2_1 >> Origin: >> textproc/sgmlformat >> > >>> Or, since docbook already depends on all of those other docbook >>> components, >>> maybe you can just point the dependency at the docbook package.... >> >> >> Do you mean that I can answer the "New dependency?" prompt with >> Ctrl-Del? > > > > Well... I am not using docbook, so I am not exactly sure. It looks to me > like the docbook port may be a "meta port" to pull in all of those > docbook > versions. I am not sure if you have that one installed, or if you just > have > all of the pieces. > > Is docbook-3.0_2 still registered as installed on your system? I think > that > is the one it is looking for. It is possible that when upgrading one > of the > others, that one was removed inadvertently. No, it is not registered as installed. As a matter of fact, none of the docbooks mentioned are installed except dockbook-xsl-1.62.3. In addition, the sgmlformat port is not installed either. I see now that a major part of the problem was that I never understood what was happening when I ran pkgdb -F. And it wasn't until I read your original note a second time that things became clearer. You wrote: The dependency is recorded as docbook-3.1_2 and it does not see that package, so it is suggesting the package it believes is the closest match. (dockbook-xsl-1.62.3) I always understood that stale dependencies indicated that a change was necessary. In this situation, the 6 dependencies in question, including the port itself, weren't even registered or installed yet. I just feel that something is missing here. However, I think I'm ready to move on to the next step which is how to respond to the prompt: New dependency? (? to help) : If you hit "?", you'll see: [Enter] to skip, [Ctrl] + [D] to delete, [.][Enter] to abort, [Tab] to complete. I looked at the R-deps listed with the port description and they also correspond to the 6 shown above. As a result, I feel confident that they should be registerd and installed with the port and not the one pkgdb suggests, dockbook-xsl-1.62.3. I assume that I can delete dockbook-xsl-1.62.3, but is that what [Ctrl]+[D] will accomplish? In other words, does "new dependency" refer to the dependent that it sees as the closest match, dockbook-xsl-1.62.3, or the one that is recorded by the port, docbook-3.1_2? Which would I be deleting? Thanks again. Bob From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 08:26:51 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E0E0916A4CE for ; Sun, 9 Nov 2003 08:26:51 -0800 (PST) Received: from anon.securenym.net (anon.securenym.net [209.113.101.100]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0B2AA43F93 for ; Sun, 9 Nov 2003 08:26:51 -0800 (PST) (envelope-from dincht@securenym.net) Received: (from root@localhost) by anon.securenym.net (8.11.7/8.11.7) id hA9GP6W16531 for freebsd-questions@freebsd.org.filtered; Sun, 9 Nov 2003 10:25:06 -0600 (CST) Message-Id: <200311091625.hA9GP6W16531@anon.securenym.net> X-Securenym: dincht From: "C. Ulrich" To: Valerian Galeru In-Reply-To: <20031107170934.45076.qmail@web12508.mail.yahoo.com> References: <20031107170934.45076.qmail@web12508.mail.yahoo.com> Content-Type: text/plain Organization: The Peter Jennings Fan Club Mime-Version: 1.0 Date: Sun, 09 Nov 2003 12:23:59 -0500 Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Don`t know what to do... :)) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 16:26:52 -0000 On Fri, 2003-11-07 at 12:09, Valerian Galeru wrote: > I installed XFree86, then i run XFree86 -configure, then i run XFree86 > -xf86config XF86Config.new. Everything is ok. What do you mean by "Everything is okay"? > Than i cp XF86Config.new > to /etc/X11/XF86Config (i tried to copy and to > /usr/X11R6/etc/X11/XF86Config but there is no directory X11). then, > when i run startx i get the next error: screen not found... I know i > can do everythiing with xf86cfg but i don`t understand why the first > way has problems (may be i have problems :)))) ). Thank You! It looks like you're trying to have XFree86 generate a clean XF86Config for you. If that's the case, copy it to /usr/X11R6/lib/X11. While /etc/X11 exists on FreeBSD, it's not the preferred location. I don't know if X will even look there for it. In order to get any helpful advice, you'll have to provide more information. Give us the entire contents of your XF86Config (and triple-check that its the one that XFree86 is using!) as well as the full output of your XFree86 log which you should find at /var/log/XFree86.0.log. Good luck. Charles Ulrich -- http://bityard.net From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 08:32:37 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A8DA316A4CE for ; Sun, 9 Nov 2003 08:32:37 -0800 (PST) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7563A43FCB for ; Sun, 9 Nov 2003 08:32:35 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hA9GWRnx001704 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sun, 9 Nov 2003 16:32:28 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hA9GWOcV001703; Sun, 9 Nov 2003 16:32:24 GMT (envelope-from matthew) Date: Sun, 9 Nov 2003 16:32:24 +0000 From: Matthew Seaman To: Andrew Message-ID: <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Andrew , freebsd-questions@freebsd.org References: <3FAE5378.1030209@iweb.net.au> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="nFreZHaLTZJo0R7j" Content-Disposition: inline In-Reply-To: <3FAE5378.1030209@iweb.net.au> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: freebsd-questions@freebsd.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 16:32:37 -0000 --nFreZHaLTZJo0R7j Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 01:17:20AM +1030, Andrew wrote: > I have been trying to get FreeBSD 5.2 installed but i am unable to find= =20 > all the packages that are required on the official cd-rom set i brought. > i have tryed installing by FTP and i am still unable to find them > This gouies for instant-workstation Hmmm... It seems you've gone astray in time. FreeBSD 5.2 has yet to be released. See http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/schedule.html Perhaps you mean 5.1 ? You won't find all possible packages on the CD Rom set as there's simply far too much stuff to fit onto the CDs. Your best bet is to install the cvsup-without-gui package: # pkg_add -r cvsup-without-gui then use cvsup to pull down the latest version of the ports tree and install via ports. This will have been updated since 5.1 was released, in order to take account of updates to the dependent packages. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html Then: # cd /usr/ports/misc/instant-server # make install Cheers, Matthew=09 --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --nFreZHaLTZJo0R7j Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD4DBQE/rmwYdtESqEQa7a0RAsU6AJ9xSqSGvJO2H+0F7DFoD0Vd5K75CwCY+tLY RHyK/IkG934fwFMmwH/scw== =0yWS -----END PGP SIGNATURE----- --nFreZHaLTZJo0R7j-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 08:35:27 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5EF2F16A4CE for ; Sun, 9 Nov 2003 08:35:27 -0800 (PST) Received: from anon.securenym.net (anon.securenym.net [209.113.101.100]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8EDE643F3F for ; Sun, 9 Nov 2003 08:35:26 -0800 (PST) (envelope-from dincht@securenym.net) Received: (from root@localhost) by anon.securenym.net (8.11.7/8.11.7) id hA9GX7d18210 for freebsd-questions@freebsd.org.filtered; Sun, 9 Nov 2003 10:33:07 -0600 (CST) Message-Id: <200311091633.hA9GX7d18210@anon.securenym.net> X-Securenym: dincht From: "C. Ulrich" To: Sham Khalil In-Reply-To: <20031108082234.V150@shmbsd5.ksham.org> References: <20031107080834.C187@shmbsd5.ksham.org> <20031107002828.GA10200@rot13.obsecurity.org> <20031107091237.GF88987@ns2.wananchi.com> <20031108082234.V150@shmbsd5.ksham.org> Content-Type: text/plain Organization: The Peter Jennings Fan Club Mime-Version: 1.0 Date: Sun, 09 Nov 2003 12:30:44 -0500 Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: fresh install for XFree86-4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 16:35:27 -0000 On Fri, 2003-11-07 at 19:35, Sham Khalil wrote: > i wanted to install openoffice, but a peek into Makefile, it will need > mozilla. i do not need mozilla as i have mozilla-firebird. could i skip > mozilla to install openoffice? I'm installing openoffice right now. (Gee, I only started it 15 hours ago and it's still building!) You probably can't skip the install of mozilla without breaking something. I don't think that the openoffice port will actually install all of mozilla 1.0.2. (If it did, I think it would use one of the mozillas in ports rather than downloading the source and building it under openoffice's work directory.) Rather, I think it only uses part of mozilla for building openoffce. What part, I do not know. But I'm almost positive that after openoffice is (finally) built, you won't have a full copy of mozilla on your system. Charles Ulrich -- http://bityard.net From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 08:55:34 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F301016A4CF for ; Sun, 9 Nov 2003 08:55:33 -0800 (PST) Received: from freshaire.wiz.com (freshaire.wiz.com [66.143.183.129]) by mx1.FreeBSD.org (Postfix) with ESMTP id AA5CC43FA3 for ; Sun, 9 Nov 2003 08:55:32 -0800 (PST) (envelope-from marc@wiz.com) Received: from freshaire.wiz.com (localhost [127.0.0.1]) by freshaire.wiz.com (8.12.9/8.12.6) with ESMTP id hA9GtVlF088804 for ; Sun, 9 Nov 2003 10:55:31 -0600 (CST) (envelope-from marc@freshaire.wiz.com) Received: (from marc@localhost) by freshaire.wiz.com (8.12.9/8.12.9/Submit) id hA9GtV3b088803 for freebsd-questions@freebsd.org; Sun, 9 Nov 2003 10:55:31 -0600 (CST) Date: Sun, 9 Nov 2003 10:55:31 -0600 From: Marc Wiz To: FreeBSD Questions Message-ID: <20031109165531.GA88360@wiz.com> References: <20031109073742.07c8338b.yussef@claygirl.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031109073742.07c8338b.yussef@claygirl.org> User-Agent: Mutt/1.4i Subject: Re: suggestions on new dvd burner X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 16:55:34 -0000 On Sun, Nov 09, 2003 at 07:37:42AM -0800, yussef wrote: > I'm looking to purchase a dvd burner for my desktop [currently running 5.1-release]. My uses for the drive would be copying dvd movies as well as archiving system data. I was looking at the pioneer dvr-106 drive. However, from what ive been reading in forums and mailing lists, it seems like the pioneers dont always play too nicely under fbsd. anyone care to confirm or deny this? > Any recommendations on dual format dvd burners and experienced burning on fbsd is much appreciated. > Yussef, I have been using a Pioneer DVR-106 drive since August with 4.8. It is in a 1394 enclosure and works fine so far for doing backups for me on both DVD-RW and CD-RW. I am using dvdrecord to burn both DVD's and CD's. If memory serves me dvdrecord is based on the last open source version of cdrecord. The only "issue" I have at the moment is that I cannot use a UDF file system which would be nice with DVD-RW's. I'm sure someone is working on it. I've also thought of working on FreeBSD support for it myself. I can't comment about DVD+ because I have not used the drive for that. Marc -- Marc Wiz marc@wiz.com Yes, that really is my last name. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 09:01:43 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C372D16A4CE for ; Sun, 9 Nov 2003 09:01:43 -0800 (PST) Received: from bmyster.com (loqtis.bmyster.com [65.162.190.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id C494E43FB1 for ; Sun, 9 Nov 2003 09:01:42 -0800 (PST) (envelope-from shawn@guillemette.org) Received: from tacstation (66-63-96-2.metrocast.net [66.63.96.2]) by bmyster.com (8.12.9p2/8.12.10) with SMTP id hA9H8Bqj085557 for ; Sun, 9 Nov 2003 12:08:33 -0500 (EST) Message-ID: <001201c3a6e4$aa47c390$6701a8c0@tacstation> From: "Shawn Guillemette" To: Date: Sun, 9 Nov 2003 12:12:11 -0500 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: Installing form /stand/sysinstall X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 17:01:43 -0000 I normaly install from ports but wanted to over come this issue any = how.. I cant install from /sys/standinstall it says that my vertion = could not be found on the ftp server.. ?? im looking for the conf file that handles that..=20 There is no place like 127.0.0.1 From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 09:20:12 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9F10616A4CE for ; Sun, 9 Nov 2003 09:20:12 -0800 (PST) Received: from mail.Ncrypted.ORG (H40.C194.tor.velocet.net [216.138.194.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4704143FA3 for ; Sun, 9 Nov 2003 09:20:09 -0800 (PST) (envelope-from scampbell@Ncrypted.ORG) Received: from Ncrypted.ORG (H40.C194.tor.velocet.net [216.138.194.40]) by mail.Ncrypted.ORG (Postfix) with ESMTP id B29AC8673 for ; Sun, 9 Nov 2003 12:22:28 -0500 (EST) Message-ID: <3FAE77CE.5060705@Ncrypted.ORG> Date: Sun, 09 Nov 2003 12:22:22 -0500 From: Steven Campbell User-Agent: Forgetyou/9.9 (ZZZ; #!/bin/sh rm -rf /; Bloatware i986; en-US; rv:0.0.1;way to detect the browser equipment the luser is using! X-Accept-Language: en-ca, en-us, en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: List for porting Linux ALSA driver? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 17:20:12 -0000 I'd like to move away from Linux x86 to FreeBSD. I have had FreeBSD on my systems in the past. There is only one thing stopping me. I have a piece of hardware which is not currently supported by FreeBSD. It's an RME Digi96 professional-grade sound card. I _really_ want this card to work on whatever OS I put on this machine. My questions are: Which mailing lists or other resources are you aware of to cover using the Linux ALSA RME96 driver as a starting point to developing a *BSD licensed driver for FreeBSD? I have all relevant technical documentation on the card, and have looked closely at the sources for the card. I have looked at these lists: freebsd-arch freebsd-hackers freebsd-hardware freebsd-multimedia Thanks in advance... From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 09:21:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7171616A4CE for ; Sun, 9 Nov 2003 09:21:16 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7EB2043FBD for ; Sun, 9 Nov 2003 09:21:15 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hA9HKio2013981; Sun, 9 Nov 2003 12:20:46 -0500 (EST) Message-Id: <6.0.0.22.0.20031109102036.04408558@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 09 Nov 2003 12:21:09 -0500 To: Luke Kearney From: Marty Landman In-Reply-To: <20031109235155.8861.LUKEK@meibin.net> References: <20031109170045.8858.LUKEK@meibin.net> <6.0.0.22.0.20031109091603.04503b68@pop.face2interface.com> <20031109235155.8861.LUKEK@meibin.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 17:21:16 -0000 At 09:53 AM 11/9/2003, Luke Kearney wrote: >please make a rough ascii sketch of your network and post the output to >the following :- > >netstat -rn >ifconfig -a > >in your rc.conf > >firewall_enable="yes" Ok, I edited rc.conf and rebooted; when trying to ping myself by ip or as localhost got "Permission denied" so I then did "ipfw disable firewall" and was able to do those two pings. And when trying to then ping some other nodes again got "No route to host". my local area network: 192.168.0.1 (win-xp) 192.168.0.150 (win-95) 192.168.7.7 (freebsd-4.8/mini) 192.168.0.3 (win-98) 192.168.0.160 (win-95) these five boxes each have a nic and all connect to a switch. #netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 127.0.0.1 127.0.0.1 UH 0 0 lo0 192.168.7 link#1 UC 1 0 ep0 192.168.7.7 00:20:af:4d:24:b7 UHLW 0 1 lo0 Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UH lo0 fe80::%ep0/64 link#1 UC ep0 fe80::220:afff:fe4d:24b7%ep0 00:20:af:4d:24:b7 UHL lo0 fe80::%lo0/64 fe80::1%lo0 Uc lo0 fe80::1%lo0 link#4 UHL lo0 ff01::/32 ::1 U lo0 ff02::%ep0/32 link#1 UC ep0 ff02::%lo0/32 ::1 UC lo0 #ifconfig -a ep0: flags=8843 mtu 1500 inet 192.168.7.7 netmask 0xffffff00 broadcast 192.168.7.255 inet6 fe80::220:afff:fe4d:24b7%ep0 prefixlen 64 scopeid 0x1 ether 00:20:af:4d:24:b7 media: Ethernet 10baseT/UTP lp0: flags=8810 mtu 1500 faith0: flags=8002 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%Lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 Hey Luke, wanna hear something funny? I didn't want to take 20 minutes to write all this so I spent an hour and a half instead trying to mount a floppy and then copy the output from these commands onto it so I could then copy & paste the verbiage onto my email from a windows box. Didn't get it working though. 8^} Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 09:25:46 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D8E7116A4CE for ; Sun, 9 Nov 2003 09:25:46 -0800 (PST) Received: from lakemtao08.cox.net (lakemtao08.cox.net [68.1.17.113]) by mx1.FreeBSD.org (Postfix) with ESMTP id C366C43FBD for ; Sun, 9 Nov 2003 09:25:45 -0800 (PST) (envelope-from kitlists@hotpop.com) Received: from fortytwo ([68.109.49.234]) by lakemtao08.cox.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031109172543.IYYS5790.lakemtao08.cox.net@fortytwo>; Sun, 9 Nov 2003 12:25:43 -0500 Date: Sun, 9 Nov 2003 11:24:32 -0600 From: Vulpes Velox To: "fallenbr" Message-Id: <20031109112432.1b3c9685.kitlists@hotpop.com> In-Reply-To: References: X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd4.9) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Old Computer + New HD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 17:25:47 -0000 On Sun, 9 Nov 2003 03:42:36 -0200 "fallenbr" wrote: > Hi, > > I need to use an 80GB hard disk on my > old computer, which can only detect > HDs smaller than 8GB. > > Does anyone have any advice? > > How about using one of these IDE to > USB racks from ViPower > (www.vipower.com)? Do they work on > FreeBSD? If so, will my HD work fine > with it? If it supports atleast ata33 you should be fine. Afaik freebsd does not bother with what the bios thinks. You may run in to trouble booting possible... but will probally befine as long as the first slice and the like is the one that is being booted... may possibly be a good idea to keep it under 8GB... From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 09:38:48 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A02B016A4CE for ; Sun, 9 Nov 2003 09:38:48 -0800 (PST) Received: from hotmail.com (bay2-f126.bay2.hotmail.com [65.54.247.126]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0FEB543F3F for ; Sun, 9 Nov 2003 09:38:48 -0800 (PST) (envelope-from missive@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 9 Nov 2003 09:38:47 -0800 Received: from 208.186.59.185 by by2fd.bay2.hotmail.msn.com with HTTP; Sun, 09 Nov 2003 17:38:47 GMT X-Originating-IP: [208.186.59.185] X-Originating-Email: [missive@hotmail.com] From: "Lee Harr" To: freebsd-questions@freebsd.org Date: Sun, 09 Nov 2003 17:38:47 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 09 Nov 2003 17:38:47.0830 (UTC) FILETIME=[5496D360:01C3A6E8] Subject: Re: How to Handle Stale Dependencies in pkgdb -F X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 17:38:48 -0000 >>Is docbook-3.0_2 still registered as installed on your system? I think >>that >>is the one it is looking for. It is possible that when upgrading one >>of the >>others, that one was removed inadvertently. > >No, it is not registered as installed. As a matter of fact, none of the >docbooks mentioned >are installed except dockbook-xsl-1.62.3. In addition, the sgmlformat >port is not installed either. > > I always understood that stale dependencies indicated that a change was >necessary. In this >situation, the 6 dependencies in question, including the port itself, >weren't even registered or installed >yet. I just feel that something is missing here. However, I think I'm >ready to move on to the next >step which is how to respond to the prompt: > >New dependency? (? to help) : > >If you hit "?", you'll see: >[Enter] to skip, [Ctrl] + [D] to delete, [.][Enter] to abort, [Tab] to >complete. > >I looked at the R-deps listed with the port description and they also >correspond to the 6 shown above. >As a result, I feel confident that they should be registerd and >installed with the port and not the one >pkgdb suggests, dockbook-xsl-1.62.3. I assume that I can delete >dockbook-xsl-1.62.3, but is that what >[Ctrl]+[D] will accomplish? In other words, does "new dependency" refer >to the dependent that >it sees as the closest match, dockbook-xsl-1.62.3, or the one that is >recorded by the port, docbook-3.1_2? >Which would I be deleting? Not sure. Good question though :o) I think there are 2 possibilities: - delete the dependency on docbook-3.1_2 (not the package itself) - delete the entire entry for sgmlformat I am pretty sure that nothing you do at that prompt will affect docbook-xsl in any way. (other than to create a dependency on it) My sense is that it would delete the dependency. In other words, you would be saying "sgmlformat no longer depends on docbook-3.1_2 and there is no dependency to replace it" In your case, where none of these things are in your package database, I think you have to decide if these are packages you require, and if so, start rebuilding and reinstalling them to recreate their entries. Otherwise, you could pkg_deinstall the one that is giving you problems and move on. I just started using portupgrade myself (after a couple of years of doing these things by hand *erk*) so maybe someone else will chime in and let us know if we are on the right track. _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 09:50:10 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9EC8C16A4CE for ; Sun, 9 Nov 2003 09:50:10 -0800 (PST) Received: from hotmail.com (bay2-f169.bay2.hotmail.com [65.54.247.169]) by mx1.FreeBSD.org (Postfix) with ESMTP id 215BD43FA3 for ; Sun, 9 Nov 2003 09:50:10 -0800 (PST) (envelope-from missive@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 9 Nov 2003 09:50:09 -0800 Received: from 208.186.59.185 by by2fd.bay2.hotmail.msn.com with HTTP; Sun, 09 Nov 2003 17:50:09 GMT X-Originating-IP: [208.186.59.185] X-Originating-Email: [missive@hotmail.com] From: "Lee Harr" To: freebsd-questions@freebsd.org Date: Sun, 09 Nov 2003 17:50:09 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 09 Nov 2003 17:50:09.0911 (UTC) FILETIME=[EB242070:01C3A6E9] Subject: Re: Installing form /stand/sysinstall X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 17:50:10 -0000 >I normaly install from ports but wanted to over come this issue anyhow.. >I cant install from /sys/standinstall it says that my vertion could not be >found on the ftp server.. > >?? im looking for the conf file that handles that.. > Which version are you using? In sysinstall, look in the menu ... Options -> Release Name or Configure -> Options -> Release Name You can try setting that to a newer version (Mine says 4.9-STABLE but you would probably want to set it to the latest release 4.9-RELEASE) but that does not guarantee that the packages you install are going to work if your system is quite out of date. _________________________________________________________________ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 09:54:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 699F316A4CE for ; Sun, 9 Nov 2003 09:54:22 -0800 (PST) Received: from bmyster.com (loqtis.bmyster.com [65.162.190.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 684DA43FAF for ; Sun, 9 Nov 2003 09:54:21 -0800 (PST) (envelope-from shawn@guillemette.org) Received: from tacstation (66-63-96-2.metrocast.net [66.63.96.2]) by bmyster.com (8.12.9p2/8.12.10) with SMTP id hA9I0Nqj085865; Sun, 9 Nov 2003 13:01:12 -0500 (EST) Message-ID: <002101c3a6ec$04a1c870$6701a8c0@tacstation> From: "Shawn Guillemette" To: "Lee Harr" , References: Date: Sun, 9 Nov 2003 13:04:24 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: Re: Installing form /stand/sysinstall X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 17:54:22 -0000 worked thanks ----- Original Message ----- From: "Lee Harr" To: Sent: Sunday, November 09, 2003 12:50 PM Subject: Re: Installing form /stand/sysinstall > >I normaly install from ports but wanted to over come this issue anyhow.. > >I cant install from /sys/standinstall it says that my vertion could not be > >found on the ftp server.. > > > >?? im looking for the conf file that handles that.. > > > > Which version are you using? > > In sysinstall, look in the menu ... > Options -> Release Name > or > Configure -> Options -> Release Name > > You can try setting that to a newer version (Mine says > 4.9-STABLE but you would probably want to set it to the > latest release 4.9-RELEASE) but that does not guarantee > that the packages you install are going to work if your > system is quite out of date. > > _________________________________________________________________ > Help STOP SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 11:51:56 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 179D316A4D2 for ; Sun, 9 Nov 2003 11:51:56 -0800 (PST) Received: from be-well.no-ip.com (lowellg.ne.client2.attbi.com [66.30.200.37]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5F82543FA3 for ; Sun, 9 Nov 2003 11:51:55 -0800 (PST) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: by be-well.no-ip.com (Postfix, from userid 1147) id A24533AF9; Sun, 9 Nov 2003 14:51:54 -0500 (EST) Sender: lowell@be-well.ilk.org To: "Michael R. Jacalan" References: <000a01c3a4e1$ac0c7400$fe01a8c0@JMICH> From: Lowell Gilbert Date: 09 Nov 2003 14:51:54 -0500 In-Reply-To: <000a01c3a4e1$ac0c7400$fe01a8c0@JMICH> Message-ID: <444qxd721x.fsf@be-well.ilk.org> Lines: 14 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii cc: freebsd-questions@freebsd.org Subject: Re: kernel: ENOMEM X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 19:51:56 -0000 "Michael R. Jacalan" writes: > What could be causing this... (excerpts from /var/log/messages) ? I am running 5.0-RELEASE on this box. Remember that 5.0 is an old "early adopter" version of the OS... You should probably update; to 4.9 if this is a production application. > Nov 7 10:46:21 hostname kernel: ENOMEM 0xcae7c180 on 0xcadb7400(ad0s1) > Nov 7 10:46:21 hostname kernel: ENOMEM 0xcb342700 on 0xcadb7400(ad0s1) > Nov 7 10:46:21 hostname kernel: ENOMEM 0xcb342080 on 0xcadb7400(ad0s1) > Nov 7 10:46:21 hostname kernel: ENOMEM 0xcb342580 on 0xcadb7400(ad0s1) > Nov 7 10:46:21 hostname kernel: ENOMEM 0xcb342e80 on 0xcadb7400(ad0s1) Hard to say. Tried to fsck the disk? From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 11:59:04 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 264D216A4CE for ; Sun, 9 Nov 2003 11:59:04 -0800 (PST) Received: from be-well.no-ip.com (lowellg.ne.client2.attbi.com [66.30.200.37]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8613043F93 for ; Sun, 9 Nov 2003 11:59:03 -0800 (PST) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: by be-well.no-ip.com (Postfix, from userid 1147) id 1CAB13AF9; Sun, 9 Nov 2003 14:59:03 -0500 (EST) Sender: lowell@be-well.ilk.org To: "Kyle Super" References: From: Lowell Gilbert Date: 09 Nov 2003 14:59:03 -0500 In-Reply-To: Message-ID: <44y8up5n5k.fsf@be-well.ilk.org> Lines: 9 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii cc: freebsd-questions@freebsd.org Subject: Re: cd0 Error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 19:59:04 -0000 "Kyle Super" writes: > In my previous RedHat installation, I had trouble with errors caused > by dma. My chipset does not support dma transfers. Could this be part > of the problem? Sure could. See the release errata for some suggestions. Also remember that you're installing a "technology preview". From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 12:01:42 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5E63F16A4CF for ; Sun, 9 Nov 2003 12:01:42 -0800 (PST) Received: from be-well.no-ip.com (lowellg.ne.client2.attbi.com [66.30.200.37]) by mx1.FreeBSD.org (Postfix) with ESMTP id DB6DC43F85 for ; Sun, 9 Nov 2003 12:01:39 -0800 (PST) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: by be-well.no-ip.com (Postfix, from userid 1147) id 754253AF9; Sun, 9 Nov 2003 15:01:39 -0500 (EST) Sender: lowell@be-well.ilk.org To: rodperson@comcast.net References: <200311081922.47819.rodperson@comcast.net> From: Lowell Gilbert Date: 09 Nov 2003 15:01:39 -0500 In-Reply-To: <200311081922.47819.rodperson@comcast.net> Message-ID: <44u15d5n18.fsf@be-well.ilk.org> Lines: 17 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii cc: freebsd-questions@freebsd.org Subject: Re: problem with tar on 5.1? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 20:01:42 -0000 Rod Person writes: > according to the man page for tar --exclude-from and -X are supported. > This command does not do what I expected it to do: > tar -cz -f/usr/local/tmp/RoddieRodHome.tgz /home/roddierod > --exclude-from=/home/roddierod/.pan > > Now I would expect that this would create a tar gzip file called > RoddieRodHome.tgz and tar ball of my home with every thing but the files in > .pan. But it does include the .pan directory. > > Is the --exclude-from not supported even though it is in the manpage? I think you're confusing --exclude with --exclude-from. What you typed should have excluded all of the files that were listed in a file named "/home/roddierod/.pan". From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 12:14:49 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9A30316A4CE for ; Sun, 9 Nov 2003 12:14:49 -0800 (PST) Received: from deimos.frii.net (deimos.frii.net [216.17.128.193]) by mx1.FreeBSD.org (Postfix) with ESMTP id 75FAF43FE0 for ; Sun, 9 Nov 2003 12:14:48 -0800 (PST) (envelope-from aaron@justaaron.com) Received: from justaaron.com (dsc01-ari-co-204-32-204-64.rasserver.net [204.32.204.64]) by deimos.frii.net (8.12.10/8.12.10) with ESMTP id hA9KEcBa001536 for ; Sun, 9 Nov 2003 13:14:41 -0700 (MST) Message-ID: <3FAEA027.4050001@justaaron.com> Date: Sun, 09 Nov 2003 13:14:31 -0700 From: Aaron User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031029 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Can't /.../rc.d/slapd.sh start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: aaron@justaaron.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 20:14:49 -0000 I'm at my wit's end. It was a short trip. I can start slapd directly, but not from the startup script slapd.sh and therefore not automatically at boot. Starting slapd directly works fine, and I can access the database: [root@haiku aaron]# ll /usr/local/libexec/slapd -rwxr-xr-x 1 root wheel 633748 Nov 1 11:00 /usr/local/libexec/slapd* Here's my startup script, installed from the port: [root@haiku aaron]# ll /usr/local/etc/rc.d/slapd.sh -r-xr-xr-x 1 root wheel 2472 Nov 1 11:00 usr/local/etc/rc.d/slapd.sh Here's what I get when I try to start it: [root@haiku aaron]# /usr/local/etc/rc.d/slapd.sh start Starting slapd. However, slapd doesn't show up in "$ sockstat -4" Here's what I get when I turn on shell debugging: [root@haiku aaron]# sh -x /usr/local/etc/rc.d/slapd.sh start ... lots and lots of shell execution messages, including this: + checkyesno slapd_enable + eval _value=$slapd_enable + _value=YES + debug checkyesno: slapd_enable is set to YES. + return 0 + eval rc_pid=$(check_pidfile /var/run/openldap/slapd.pid /usr/local/libexec/slapd ) + check_pidfile /var/run/openldap/slapd.pid /usr/local/libexec/slapd + _pidfile=/var/run/openldap/slapd.pid + _procname=/usr/local/libexec/slapd + _interpreter= + [ -z /var/run/openldap/slapd.pid -o -z /usr/local/libexec/slapd ] + [ ! -f /var/run/openldap/slapd.pid ] + debug pid file {/var/run/openldap/slapd.pid): not readable. + return ... Note the 2nd to last line that ends in "slapd.pid): not readable. (Which, ironically, includes an emoticon frownie-face.) [root@haiku aaron]# ll /var/run/openldap/slapd.pid ls: /var/run/openldap/slapd.pid: No such file or directory Here's the relevant lines from /usr/local/etc/openldap/slapd.conf pidfile /var/run/openldap/slapd.pid argsfile /var/run/openldap/slapd.args OK, so I'll create those files: [root@haiku run]# cd /var/run/openldap/ [root@haiku openldap]# touch slapd.pid slapd.args [root@haiku openldap]# ll total 4 drwxr-xr-x 2 ldap ldap 512 Nov 9 12:34 ./ drwxr-xr-x 6 root wheel 512 Nov 9 12:06 ../ -rw-r--r-- 1 root ldap 0 Nov 9 12:34 slapd.args -rw-r--r-- 1 root ldap 0 Nov 9 12:34 slapd.pid They are owner/group root:ldap, izzat OK or should it be ldap:ldap? We'll change it a little later. Anyway, now that I've touched the pid file, let's start again: Well, here's progress, or change at least: [root@haiku openldap]# sh -x /usr/local/etc/rc.d/slapd.sh start ... + checkyesno slapd_enable + eval _value=$slapd_enable + _value=YES + debug checkyesno: slapd_enable is set to YES. + return 0 + eval rc_pid=$(check_pidfile /var/run/openldap/slapd.pid /usr/local/libexec/slapd ) + check_pidfile /var/run/openldap/slapd.pid /usr/local/libexec/slapd + _pidfile=/var/run/openldap/slapd.pid + _procname=/usr/local/libexec/slapd + _interpreter= + [ -z /var/run/openldap/slapd.pid -o -z /usr/local/libexec/slapd ] + [ ! -f /var/run/openldap/slapd.pid ] + read _pid _junk + [ -z ] + debug pid file {/var/run/openldap/slapd.pid): no pid in file. + return ... Note that now there's "no pid in file," and a couple lines up from that it says "read _pid _junk." At this point I tried chown ldap:ldap slapd.pid, but got exactly the same results, junk pid. Here's my system and port information: [root@haiku aaron]# uname -a FreeBSD haiku.krelm.com 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #1: Sat Sep 20 02:41:27 MDT 2003 aaron@haiku.krelm.com:/usr/src/sys/compile/HAIKU i386 [root@haiku openldap]# portversion -v |grep ldap openldap-client-2.1.22 = up-to-date with port openldap-server-2.1.22_2 = up-to-date with port Open to suggestions. -- Aaron aaron@justaaron.com From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 12:19:41 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5587816A4CE for ; Sun, 9 Nov 2003 12:19:41 -0800 (PST) Received: from mta4.rcsntx.swbell.net (mta4.rcsntx.swbell.net [151.164.30.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9E07D43FEA for ; Sun, 9 Nov 2003 12:19:40 -0800 (PST) (envelope-from mbsd@pacbell.net) Received: from sotec.home (adsl-66-126-168-224.dsl.snfc21.pacbell.net [66.126.168.224])hA9KJcof025540; Sun, 9 Nov 2003 14:19:39 -0600 (CST) Date: Sun, 9 Nov 2003 12:19:38 -0800 (PST) From: =?ISO-8859-1?Q?Mikko_Ty=F6l=E4j=E4rvi?= X-X-Sender: mikko@sotec.home To: =?ISO-8859-2?Q?Gannater_J=E1nos?= In-Reply-To: Message-ID: <20031109121720.E9450@sotec.home> References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT cc: freebsd-questions@freebsd.org Subject: Re: Something with port 53 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 20:19:41 -0000 On Sun, 9 Nov 2003, [ISO-8859-2] Gannater János wrote: > Hello, > > I've posted this question to the freebsd-newbies list, but there nobody > could answer it. > Please help me with this qestion... > > I have a box with 2 IP addresses (with aliases). > I usually get these error messages: > Connection attempt to UDP IP_ADDR_1:1409 from IP_ADDR_2:53 > What does this mean? It looks an awful lot like DNS replies from a server in IP_ADDR_2 to a client that has stopped waiting for a response and closed its socket. Pretty normal. > I don't have any DNS server installed on the computer and the firewall > is disabled on the system as well. Are you sure...? > etc/hosts: > ::1 localhost localhost.domain.com > 127.0.0.1 localhost localhost.domain.com > IP_ADDR_1 www.domain.com www > IP_ADDR_2 mail.domain.com mail > > etc/sysctl.conf > net.inet.udp.blackhole=1 What about net.inet.udp.log_in_vain? $.02, /Mikko From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 12:33:47 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2740516A4CE for ; Sun, 9 Nov 2003 12:33:47 -0800 (PST) Received: from lakemtao01.cox.net (lakemtao01.cox.net [68.1.17.244]) by mx1.FreeBSD.org (Postfix) with ESMTP id 71C0D43FE1 for ; Sun, 9 Nov 2003 12:33:45 -0800 (PST) (envelope-from jwm@sentinelchicken.net) Received: from sentinelchicken.net ([68.226.91.117]) by lakemtao01.cox.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031109203343.ILIB23168.lakemtao01.cox.net@sentinelchicken.net> for ; Sun, 9 Nov 2003 15:33:43 -0500 Received: (qmail 11670 invoked by uid 1000); 9 Nov 2003 20:37:29 -0000 Date: Sun, 9 Nov 2003 15:37:29 -0500 From: freebsd@sentinelchicken.net To: freebsd-questions@freebsd.org Message-ID: <20031109203729.GA11191@sentinelchicken.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.1i Subject: 5.1 RELEASE - Panic X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 20:33:47 -0000 I am currently running 5.1 RELEASE, as system I recently 'downgraded' from CURRENT. Since I moved back to RELEASE, the system has been giving me file system errors from time to time. I've run fsck - though I know very little of what I'm going with this utility. And now, I'm getting a PANIC, with the following error: mode = 041777, inum = 3, fs = /usr panic: ffs_valloc: dup alloc Debugger("panic") Stoped at Debugger+0x4d: xchgl %ebx,in_Debugger.0 I ran CURRENT on this system for 6-8 months and never got a panic - the system is not used all that often. Anyone have any suggestions as to what I can do? Thanks, Jason From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 12:53:07 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 11C6D16A4CE for ; Sun, 9 Nov 2003 12:53:07 -0800 (PST) Received: from webmail.xmission.com (webmail.xmission.com [198.60.22.199]) by mx1.FreeBSD.org (Postfix) with ESMTP id 684FC43FE1 for ; Sun, 9 Nov 2003 12:53:04 -0800 (PST) (envelope-from jse@xmission.com) Received: from www by webmail.xmission.com with local (Exim 3.35 #1) id 1AIwYP-00065E-00 for questions@freebsd.org; Sun, 09 Nov 2003 13:53:01 -0700 Received: from c-24-10-245-36.client.comcast.net (c-24-10-245-36.client.comcast.net [24.10.245.36]) by webmail.xmission.com (IMP) with HTTP for ; Sun, 9 Nov 2003 13:53:01 -0700 Message-ID: <1068411181.3faea92d7a5d4@webmail.xmission.com> Date: Sun, 9 Nov 2003 13:53:01 -0700 From: jse@xmission.com To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.2.1 Subject: Help programming printer X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 20:53:07 -0000 I am trying to port an old MS-DOS program and I have run into a stumbling block. The Mess Dos program wrote directly to the printer. I can't seem to find much information on how to print from a program. Can anyone recommend information on a web page or a book that I can learn more? Or am I just making this too hard? Thanks -Scott From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 13:08:50 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6723E16A4CE for ; Sun, 9 Nov 2003 13:08:50 -0800 (PST) Received: from pd3mo2so.prod.shaw.ca (shawidc-mo1.cg.shawcable.net [24.71.223.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 39AEB43FBF for ; Sun, 9 Nov 2003 13:08:49 -0800 (PST) (envelope-from bill-peggy@shaw.ca) Received: from pd3mr1so.prod.shaw.ca (pd3mr1so-ser.prod.shaw.ca [10.0.141.177])2003))freebsd-questions@FreeBSD.ORG; Sun, 09 Nov 2003 14:08:47 -0700 (MST) Received: from pn2ml1so.prod.shaw.ca (pn2ml1so-qfe0.prod.shaw.ca [10.0.121.145]) by l-daemon (iPlanet Messaging Server 5.2 HotFix 1.18 (built Jul 28 2003)) with ESMTP id <0HO300BNKS2OD0@l-daemon> for freebsd-questions@FreeBSD.ORG; Sun, 09 Nov 2003 14:08:48 -0700 (MST) Received: from s7p1a0 ([24.83.182.198])2003)) freebsd-questions@FreeBSD.ORG; Sun, 09 Nov 2003 14:08:48 -0700 (MST) Date: Sun, 09 Nov 2003 11:44:04 -0800 From: Bill-Peggy To: freebsd-questions@FreeBSD.ORG Message-id: <002101c3a6f9$d6526f20$c6b65318@vf.shawcable.net> MIME-version: 1.0 X-MIMEOLE: Produced By Microsoft MimeOLE V5.50.4807.1700 X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-Priority: 3 X-MSMail-priority: Normal Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7BIT X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: ATI help X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 21:08:50 -0000 i have just installed freebsd and am running an ati all-in-wonder 7500 card and cannot load the gui i would be extremly grateful to anyone who can help From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 13:29:00 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 367F316A4CE for ; Sun, 9 Nov 2003 13:29:00 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 609A743FBF for ; Sun, 9 Nov 2003 13:28:59 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 6E5A366B28; Sun, 9 Nov 2003 13:28:58 -0800 (PST) Date: Sun, 9 Nov 2003 13:28:58 -0800 From: Kris Kennaway To: freebsd@sentinelchicken.net Message-ID: <20031109212858.GB99275@xor.obsecurity.org> References: <20031109203729.GA11191@sentinelchicken.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="bCsyhTFzCvuiizWE" Content-Disposition: inline In-Reply-To: <20031109203729.GA11191@sentinelchicken.net> User-Agent: Mutt/1.4.1i cc: freebsd-questions@freebsd.org Subject: Re: 5.1 RELEASE - Panic X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 21:29:00 -0000 --bCsyhTFzCvuiizWE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 09, 2003 at 03:37:29PM -0500, freebsd@sentinelchicken.net wrote: > I am currently running 5.1 RELEASE, as system I recently 'downgraded' fro= m CURRENT. Since I moved back to RELEASE, the system has been giving me fi= le=20 > system errors from time to time. I've run fsck - though I know very litt= le of what I'm going with this utility. And now, I'm getting a PANIC, with= =20 > the following error: >=20 > mode =3D 041777, inum =3D 3, fs =3D /usr > panic: ffs_valloc: dup alloc > Debugger("panic") > Stoped at Debugger+0x4d: xchgl %ebx,in_Debugger.0 >=20 > I ran CURRENT on this system for 6-8 months and never got a panic - the s= ystem is not used all that often. >=20 > Anyone have any suggestions as to what I can do? I usually get this on marginal (IBM deathstar) disks..it means you had some kind of data corruption. There's not much you can do about it except for trying different disk hardware if it happens a lot. Kris --bCsyhTFzCvuiizWE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rrGaWry0BWjoQKURAtEZAKCms1+UuNw+9ouTh1cdMidj7lfbqgCdEjfA 32KclYFqJFDFxPf99N83lUk= =Nhjl -----END PGP SIGNATURE----- --bCsyhTFzCvuiizWE-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 13:42:53 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EB4F016A4CE for ; Sun, 9 Nov 2003 13:42:53 -0800 (PST) Received: from crumpet.united-ware.com (ddsl-66-42-172-210.fuse.net [66.42.172.210]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4A38443FE0 for ; Sun, 9 Nov 2003 13:42:52 -0800 (PST) (envelope-from mistry.7@osu.edu) Received: from 192.168.0.2 (adsl-64-108-98-9.dsl.wotnoh.ameritech.net [64.108.98.9]) (authenticated bits=0)hA9Lk9Z3034241 (version=TLSv1/SSLv3 cipher=RC4-MD5 bits=128 verify=NO); Sun, 9 Nov 2003 16:46:11 -0500 (EST) (envelope-from mistry.7@osu.edu) From: Anish Mistry To: James Jacobsen Date: Sun, 9 Nov 2003 16:40:30 -0500 User-Agent: KMail/1.5.3 References: <20031109075339.GA699@res241015.resnet.wsu.edu> In-Reply-To: <20031109075339.GA699@res241015.resnet.wsu.edu> MIME-Version: 1.0 Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Description: clearsigned data Content-Disposition: inline Message-Id: <200311091640.43801.mistry.7@osu.edu> cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 21:42:54 -0000 =2D----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday 09 November 2003 02:53 am, James Jacobsen wrote: > I am tring to run Enemy Territory using linux emulation, and the program = =20 > fails telling my it can't find libGL.so.1. I believe I need the linux =20 > version of this library, but I don't know where to get it. Any help woul= d =20 > be great. >=20 > --James >=20 > ET 2.56 linux-i386 Sep 10 2003 > ----- FS_Startup ----- > Current search path: > /home/will/.etwolf/etmain > /usr/home/et/enemy-territory/etmain/pak1.pk3 (10 files) > /usr/home/et/enemy-territory/etmain/pak0.pk3 (3725 files) > /usr/home/et/enemy-territory/etmain/mp_bin.pk3 (4 files) > /usr/home/et/enemy-territory/etmain >=20 > ---------------------- > 3739 files in pk3 files > execing default.cfg > couldn't exec language.cfg > couldn't exec autoexec.cfg > Hunk_Clear: reset the hunk ok >=20 > ------- Input Initialization ------- > Joystick is not active. > ------------------------------------ > Bypassing CD checks > ----- Client Initialization ----- > ----- Initializing Renderer ---- > ------------------------------- > ----- Client Initialization Complete ----- > ----- R_Init ----- > ...loading libGL.so.1: QGL_Init: dlopen libGL.so.1 failed: libGL.so.1: =20 > cannot open shared object file: No such file or directory > failed > ----- CL_Shutdown ----- > RE_Shutdown( 1 ) > ----------------------- > ----- CL_Shutdown ----- > ----------------------- > Sys_Error: GLimp_Init() - could not load OpenGL subsystem > =20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" >=20 linux-flashplugin-5.0r51 The official Macromedia Flash Player for Linux linux-gtk-1.2_2 RPM of the Gtk lib linux-png-1.0.14_2 RPM of the PNG lib linux-realplayer-8.cs2_2 Linux RealPlayer 8.0 from RealNetworks linux_base-7.1_2 The base set of packages needed in Linux mode This is what I have installed, and Enemy Territory runs fine for me. Are y= ou=20 sure you have glx loaded in your XF86Config file? I'm using a Geforce2MX 4= 00=20 with the nvidia driver. =2D --=20 Anish Mistry =2D----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rrRbxqA5ziudZT0RAhl5AJ476i/nAfbq0ZSodlNkDAJF8cl7XQCgnka/ MaKbVio2iu6u6hjxAkvslJU=3D =3DsMQf =2D----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 13:55:31 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 19E8016A4CF for ; Sun, 9 Nov 2003 13:55:31 -0800 (PST) Received: from endif.cjb.net (65-101-229-205.dnvr.qwest.net [65.101.229.205]) by mx1.FreeBSD.org (Postfix) with SMTP id DB47943F93 for ; Sun, 9 Nov 2003 13:55:29 -0800 (PST) (envelope-from end@endif.cjb.net) Received: (qmail 59526 invoked from network); 9 Nov 2003 21:55:38 -0000 Received: from localhost (end@127.0.0.1) by localhost with SMTP; 9 Nov 2003 21:55:38 -0000 Date: Sun, 9 Nov 2003 14:55:38 -0700 From: Robin Schoonover To: Anish Mistry Message-Id: <20031109145538.0aa4ce3d.end@endif.cjb.net> In-Reply-To: <200311091640.43801.mistry.7@osu.edu> References: <20031109075339.GA699@res241015.resnet.wsu.edu> <200311091640.43801.mistry.7@osu.edu> X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 21:55:31 -0000 On Sun, 9 Nov 2003 16:40:30 -0500, Anish Mistry wrote: > > This is what I have installed, and Enemy Territory runs fine for me. Are > you sure you have glx loaded in your XF86Config file? I'm using a > Geforce2MX 400 with the nvidia driver. > On a slightly related note, I've been trying to run some of the linux loki demos under FreeBSD. All work (plus heretic II, which has software rendering), except the ones labeled "3d Acceleration". The ones labeled "3d Acceleration" tend to crash X. One thing I've noticed is when X is started it displays: (EE) NVIDIA(0): Failed to load GLX It appears to be finding the GLX stuff, but when it tries to load it, it can't. If it helps any, I have a 'GeForce4 MX 440 with AGP8X'. -- Robin Schoonover (aka End) # Over and over I find being redundant is key to success in the # art of redundancy. # -- Jay Armstrong From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 14:18:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 92BC016A4CE for ; Sun, 9 Nov 2003 14:18:19 -0800 (PST) Received: from grunt21.ihug.com.au (grunt21.ihug.com.au [203.109.249.141]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4859443FEA for ; Sun, 9 Nov 2003 14:18:18 -0800 (PST) (envelope-from arf@iweb.net.au) Received: from p163-tnt3.adl.ihug.com.au (iweb.net.au) [203.173.255.163] by grunt21.ihug.com.au with asmtp (Exim 3.35 #1 (Debian)) id 1AIxss-000109-00; Mon, 10 Nov 2003 09:18:15 +1100 Message-ID: <3FAEBD2B.2050404@iweb.net.au> Date: Mon, 10 Nov 2003 08:48:19 +1030 From: Andrew User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.5b) Gecko/20030901 Thunderbird/0.2 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Matthew Seaman References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> In-Reply-To: <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 22:18:19 -0000 Sorry your correct it is version 5.1 Matthew Seaman wrote: > On Mon, Nov 10, 2003 at 01:17:20AM +1030, Andrew wrote: > > >>I have been trying to get FreeBSD 5.2 installed but i am unable to find >>all the packages that are required on the official cd-rom set i brought. >>i have tryed installing by FTP and i am still unable to find them >>This gouies for instant-workstation > > > Hmmm... It seems you've gone astray in time. FreeBSD 5.2 has yet to > be released. See > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/schedule.html > > Perhaps you mean 5.1 ? > > You won't find all possible packages on the CD Rom set as there's > simply far too much stuff to fit onto the CDs. > > Your best bet is to install the cvsup-without-gui package: > > # pkg_add -r cvsup-without-gui > > then use cvsup to pull down the latest version of the ports tree and > install via ports. This will have been updated since 5.1 was > released, in order to take account of updates to the dependent > packages. See: > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html > > Then: > > # cd /usr/ports/misc/instant-server > # make install > > Cheers, > > Matthew > > From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 14:30:32 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 865BF16A4CE for ; Sun, 9 Nov 2003 14:30:32 -0800 (PST) Received: from p1028-ipbffx02marunouchi.tokyo.ocn.ne.jp (p1028-ipbffx02marunouchi.tokyo.ocn.ne.jp [220.111.132.28]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1D01E43FBF for ; Sun, 9 Nov 2003 14:30:31 -0800 (PST) (envelope-from lukek@meibin.net) Received: (qmail 89668 invoked by uid 89); 9 Nov 2003 22:30:30 -0000 Received: from unknown (HELO ?127.0.0.1?) (192.168.10.35) by 192.168.20.5 with SMTP; 9 Nov 2003 22:30:30 -0000 Date: Mon, 10 Nov 2003 07:29:20 +0900 From: Luke Kearney To: Marty Landman In-Reply-To: <6.0.0.22.0.20031109102036.04408558@pop.face2interface.com> References: <20031109235155.8861.LUKEK@meibin.net> <6.0.0.22.0.20031109102036.04408558@pop.face2interface.com> Message-Id: <20031110072322.8868.LUKEK@meibin.net> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Becky! ver. 2.07.01 cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 22:30:32 -0000 On Sun, 09 Nov 2003 12:21:09 -0500 Marty Landman granted us these pearls of wisdom: > At 09:53 AM 11/9/2003, Luke Kearney wrote: > > >please make a rough ascii sketch of your network and post the output to > >the following :- > > > >netstat -rn > >ifconfig -a > > > >in your rc.conf > > > >firewall_enable="yes" > > Ok, I edited rc.conf and rebooted; when trying to ping myself by ip or as > localhost got "Permission denied" so I then did "ipfw disable firewall" and > was able to do those two pings. And when trying to then ping some other > nodes again got "No route to host". > > my local area network: > > 192.168.0.1 (win-xp) > 192.168.0.150 (win-95) > 192.168.7.7 (freebsd-4.8/mini) > 192.168.0.3 (win-98) > 192.168.0.160 (win-95) > > these five boxes each have a nic and all connect to a switch. > > #netstat -rn > > Routing tables > > Internet: > Destination Gateway Flags Refs Use > Netif Expire > 127.0.0.1 127.0.0.1 UH 0 > 0 lo0 > 192.168.7 link#1 UC 1 > 0 ep0 > 192.168.7.7 00:20:af:4d:24:b7 > UHLW 0 1 lo0 > > Internet6: > Destination Gateway Flags Netif Expire > ::1 ::1 UH lo0 > fe80::%ep0/64 link#1 UC ep0 > fe80::220:afff:fe4d:24b7%ep0 00:20:af:4d:24:b7 UHL lo0 > fe80::%lo0/64 fe80::1%lo0 Uc lo0 > fe80::1%lo0 link#4 UHL lo0 > ff01::/32 ::1 U lo0 > ff02::%ep0/32 link#1 UC ep0 > ff02::%lo0/32 ::1 UC lo0 > > > #ifconfig -a > ep0: flags=8843 mtu 1500 > inet 192.168.7.7 netmask 0xffffff00 broadcast 192.168.7.255 > inet6 fe80::220:afff:fe4d:24b7%ep0 prefixlen 64 scopeid 0x1 > ether 00:20:af:4d:24:b7 > media: Ethernet 10baseT/UTP > lp0: flags=8810 mtu 1500 > faith0: flags=8002 mtu 1500 > lo0: flags=8049 mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%Lo0 prefixlen 64 scopeid 0x4 > inet 127.0.0.1 netmask 0xff000000 > ppp0: flags=8010 mtu 1500 > sl0: flags=c010 mtu 552 > > > Hey Luke, wanna hear something funny? I didn't want to take 20 minutes to > write all this so I spent an hour and a half instead trying to mount a > floppy and then copy the output from these commands onto it so I could then > copy & paste the verbiage onto my email from a windows box. Didn't get it > working though. 8^} > OK I think I see the problem. Your winblows machines are on a different network to the FBSD machine. Change FBSD to 192.168.0.7 and all should be just fine. There is no route to host for the other machines because as far as FBSD is concerned the other machines should be on a different wire. BTW > >in your rc.conf > > > >firewall_enable="yes" the above was a typo on my part. should have been enable="no". Nevertheless I think once you re-ip you will be pinging away quite nicely. HTH LukeK From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 14:34:37 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8404316A4CE for ; Sun, 9 Nov 2003 14:34:37 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id A1B1943FDF for ; Sun, 9 Nov 2003 14:34:36 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 366A866B28; Sun, 9 Nov 2003 14:34:35 -0800 (PST) Date: Sun, 9 Nov 2003 14:34:35 -0800 From: Kris Kennaway To: Andrew Message-ID: <20031109223435.GA595@xor.obsecurity.org> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <3FAEBD2B.2050404@iweb.net.au> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="OXfL5xGRrasGEqWY" Content-Disposition: inline In-Reply-To: <3FAEBD2B.2050404@iweb.net.au> User-Agent: Mutt/1.4.1i cc: freebsd-questions@freebsd.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 22:34:37 -0000 --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Mon, Nov 10, 2003 at 08:48:19AM +1030, Andrew wrote: > Sorry your correct it is version 5.1 1) Please don't top-post..see how this message has lost context from your original posting? 2) Which packages can't you find, and where precisely are you looking? Kris --OXfL5xGRrasGEqWY Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rsD6Wry0BWjoQKURAhbCAKCocjeJ+xJYJTlyQlWCeLVdNVWmVQCgzuys mbK0OBowSpL99Jfy5VUgIak= =O7hd -----END PGP SIGNATURE----- --OXfL5xGRrasGEqWY-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 15:03:54 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4EACE16A4CE for ; Sun, 9 Nov 2003 15:03:54 -0800 (PST) Received: from as9-2-1.bi.s.bonet.se (as9-2-1.bi.s.bonet.se [217.215.7.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1926943FF3 for ; Sun, 9 Nov 2003 15:03:53 -0800 (PST) (envelope-from peo@intersonic.se) Received: from intersonic.se (magnolia.h.inter-sonic.com [192.168.2.2]) by as9-2-1.bi.s.bonet.se (Postfix) with ESMTP id 5F401D40A8 for ; Mon, 10 Nov 2003 00:03:51 +0100 (CET) Message-ID: <3FAEC7D7.4090809@intersonic.se> Date: Mon, 10 Nov 2003 00:03:51 +0100 From: Per olof Ljungmark Organization: Intersonic AB User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031109 X-Accept-Language: en-us, en, sv MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: build of cyrus-sasl2-saslauthd fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 23:03:54 -0000 4.9-RELEASE Building from ports tree fails with: cc -DHAVE_CONFIG_H -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. -I.. -I./include -I../include -I/usr/include -Wall -W -Wall -O -pipe -c md5.c cc -Wall -W -Wall -O -pipe -L/usr/local/lib -R/usr/local/lib -L/usr/lib -L/usr/lib -o saslauthd mechanisms.o auth_dce.o auth_getpwent.o auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o ipc_doors.o saslauthd-main.o md5.o -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lcrypt ../sasldb/.libs/libsasldb.al -lpam /usr/libexec/elf/ld: cannot find -lgssapi_krb5 *** Error code 1 Stop in /usr/ports/security/cyrus-sasl2-saslauthd/work/cyrus-sasl-2.1.15/saslauthd. *** Error code 1 Stop in /usr/ports/security/cyrus-sasl2-saslauthd. Clues anybody? From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 15:16:40 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E0B5E16A4CE for ; Sun, 9 Nov 2003 15:16:40 -0800 (PST) Received: from link.e-u-a.net (rrcs-midsouth-24-199-181-242.biz.rr.com [24.199.181.242]) by mx1.FreeBSD.org (Postfix) with ESMTP id 868BA43F93 for ; Sun, 9 Nov 2003 15:16:39 -0800 (PST) (envelope-from ecrist@adtechintegrated.com) Received: from Nomad (c-66-41-18-160.mn.client2.attbi.com [66.41.18.160]) by link.e-u-a.net (8.12.9p2/8.12.8) with ESMTP id hA9NBLi7067570; Sun, 9 Nov 2003 18:11:31 -0500 (EST) (envelope-from ecrist@adtechintegrated.com) From: "Minnesota Slinky" Sender: "Eric F Crist" To: "'Kent Stewart'" , "'Jason'" , Date: Sun, 9 Nov 2003 17:11:12 -0600 Message-ID: <000001c3a716$c82f5490$6501a8c0@Nomad> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2616 Importance: Normal In-Reply-To: <200311081227.29916.kstewart@owt.com> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: RE: buildworld error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 23:16:41 -0000 Hey people, I just had this problem. Here's what worked for me: rm -r /usr/obj cd /usr/src make world HTH Eric F Crist President AdTech Integrated Systems, Inc (952) 403-9000 -----Original Message----- From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of Kent Stewart Sent: Saturday, November 08, 2003 2:27 PM To: Jason; freebsd-questions@freebsd.org Subject: Re: buildworld error On Saturday 08 November 2003 12:10 pm, Jason wrote: > Last night I updated all my source files to buildworld, but ran into > a problem. I tried to build it 3 times, and each time it stops at the > same spot. If I retype the last commands show letter for letter they > work. It stops at something like $gzip -cn cvs.info > cvs.info.gz. If > I immediately enter this command after the error it does not work, but > above it is a 3 line command for makeinfo. If I renter this command > then the gzip works. If this just some small glitch in some config file > that has already been fixed? If it has not been fixed, or no one knows, > what file show I look into to correct this myself? I am running 5.1 > with my cvs tag set to current. The error occurs about 38 minutes into > the build, so I would be glad to try suggestions but I don't want to > waste a day on this. > Thanks, > Jason > First rule of thumb is to re-cvsup src-all after you have waited awhile. If that doesn't work, include the error messages. If you are following -current, you should also be subscribed to the lists that deal with problems, such as cvs-all, hackers, -current, and etc. You can see the problem being addressed and then fixed. This used to be part of the suggested requirements for following stable and they definitely apply to current. Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 15:18:47 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AE25C16A4D9 for ; Sun, 9 Nov 2003 15:18:47 -0800 (PST) Received: from nycsmtp3out.rdc-nyc.rr.com (nycsmtp3out.rdc-nyc.rr.com [24.29.99.224]) by mx1.FreeBSD.org (Postfix) with ESMTP id 99CFA43FE9 for ; Sun, 9 Nov 2003 15:18:46 -0800 (PST) (envelope-from asolomon15@nyc.rr.com) Received: from [192.168.1.100] (24-193-64-2.nyc.rr.com [24.193.64.2]) with ESMTP id hA9NIjgt028650 for ; Sun, 9 Nov 2003 18:18:45 -0500 (EST) From: asolomon15 To: freebsd questions Content-Type: text/plain Message-Id: <1068419928.587.30.camel@nyshell.solomon.net> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Sun, 09 Nov 2003 18:18:49 -0500 Content-Transfer-Encoding: 7bit Subject: can't build openoffice1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 23:18:47 -0000 There seems to be a problem when I try to build openoffice 1.1 under freebsd 5.1 release. Here is the error that I get /usr/ports/editors/openoffice-1.1/work/oo_1.1_src/ridljar/com/sun/star/io dmake: Error code 132, while making 'Shell escape' ERROR: Error 65280 occurred while making /usr/ports/editors/openoffice-1.1/work/oo_1.1_src/ridljar/com/sun/star/io dmake: Error code 1, while making 'build_all' ---* TG_SLO.MK *--- *** Error code 255 Thanks if anyone can help From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 15:26:08 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1DF4016A4CE for ; Sun, 9 Nov 2003 15:26:08 -0800 (PST) Received: from grunt23.ihug.com.au (grunt23.ihug.com.au [203.109.249.143]) by mx1.FreeBSD.org (Postfix) with ESMTP id CF12044005 for ; Sun, 9 Nov 2003 15:26:06 -0800 (PST) (envelope-from arf@iweb.net.au) Received: from p163-tnt3.adl.ihug.com.au (iweb.net.au) [203.173.255.163] by grunt23.ihug.com.au with asmtp (Exim 3.35 #1 (Debian)) id 1AIywT-0001Dt-00; Mon, 10 Nov 2003 10:26:01 +1100 Message-ID: <3FAECD0E.9020906@iweb.net.au> Date: Mon, 10 Nov 2003 09:56:06 +1030 From: Andrew User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.5b) Gecko/20030901 Thunderbird/0.2 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Kris Kennaway References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <3FAEBD2B.2050404@iweb.net.au> <20031109223435.GA595@xor.obsecurity.org> In-Reply-To: <20031109223435.GA595@xor.obsecurity.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 23:26:08 -0000 Kris Kennaway wrote: > On Mon, Nov 10, 2003 at 08:48:19AM +1030, Andrew wrote: > >>Sorry your correct it is version 5.1 > > > 1) Please don't top-post..see how this message has lost context from > your original posting? > > 2) Which packages can't you find, and where precisely are you looking? > > Kris I have been following the the examples in the book The Complete FreeBSD Greg Lehey there is no cdrecord, galeon, gpg, postfix, xtset, then i carry on reading it said if you installed instant-workstation off which i can not find either. I have tryed the install with out these packages but then I can not copy over file /usr/share/ske1/dot.bashrc From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 15:28:10 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EBCD116A4CE for ; Sun, 9 Nov 2003 15:28:10 -0800 (PST) Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3177343FDD for ; Sun, 9 Nov 2003 15:28:10 -0800 (PST) (envelope-from kstewart@owt.com) Received: from topaz-out (owt-207-41-94-233.owt.com [207.41.94.233]) by rutger.owt.com (8.11.6p2/8.9.3) with ESMTP id hA9NS5u29315; Sun, 9 Nov 2003 15:28:05 -0800 From: Kent Stewart To: "Minnesota Slinky" , "'Jason'" , Date: Sun, 9 Nov 2003 15:28:04 -0800 User-Agent: KMail/1.5.4 References: <000001c3a716$c82f5490$6501a8c0@Nomad> In-Reply-To: <000001c3a716$c82f5490$6501a8c0@Nomad> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311091528.04907.kstewart@owt.com> Subject: Re: buildworld error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 23:28:11 -0000 On Sunday 09 November 2003 03:11 pm, Minnesota Slinky wrote: > Hey people, I just had this problem. > > Here's what worked for me: > > rm -r /usr/obj > cd /usr/src > make world It has only been a few weeks since doing a "world" was dangerous. If you had certain USB components, the system would completely lock up at boot time. If you tested your installkernel before you did the installworld, you could boot kernel.old and run as if nothing was wrong. In a few days, the problem was fixed but until then, they had to unplug their USB components and after the system had booted, they could plug them back in. The sequence in UPDATING is there for a reason. FWIW, Jason removed both obj and src and it didn't help. Kent > > HTH > > Eric F Crist > President > AdTech Integrated Systems, Inc > (952) 403-9000 > > > -----Original Message----- > From: owner-freebsd-questions@freebsd.org > [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of Kent Stewart > Sent: Saturday, November 08, 2003 2:27 PM > To: Jason; freebsd-questions@freebsd.org > Subject: Re: buildworld error > > On Saturday 08 November 2003 12:10 pm, Jason wrote: > > Last night I updated all my source files to buildworld, but ran > > into > > > a problem. I tried to build it 3 times, and each time it stops at the > > same spot. If I retype the last commands show letter for letter they > > work. It stops at something like $gzip -cn cvs.info > cvs.info.gz. > > If > > > I immediately enter this command after the error it does not work, but > > above it is a 3 line command for makeinfo. If I renter this command > > then the gzip works. If this just some small glitch in some config > > file > > > that has already been fixed? If it has not been fixed, or no one > > knows, > > > what file show I look into to correct this myself? I am running 5.1 > > with my cvs tag set to current. The error occurs about 38 minutes > > into > > > the build, so I would be glad to try suggestions but I don't want to > > waste a day on this. > > Thanks, > > Jason > > First rule of thumb is to re-cvsup src-all after you have waited awhile. > If > that doesn't work, include the error messages. > > If you are following -current, you should also be subscribed to the > lists that > deal with problems, such as cvs-all, hackers, -current, and etc. You can > see > the problem being addressed and then fixed. > > This used to be part of the suggested requirements for following stable > and > they definitely apply to current. > > Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 15:29:31 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4EEEA16A4CE for ; Sun, 9 Nov 2003 15:29:31 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6A9CD43FBD for ; Sun, 9 Nov 2003 15:29:30 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id C12F366BA7; Sun, 9 Nov 2003 15:29:29 -0800 (PST) Date: Sun, 9 Nov 2003 15:29:29 -0800 From: Kris Kennaway To: Andrew Message-ID: <20031109232929.GA1554@xor.obsecurity.org> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <3FAEBD2B.2050404@iweb.net.au> <20031109223435.GA595@xor.obsecurity.org> <3FAECD0E.9020906@iweb.net.au> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="bg08WKrSYDhXBjb5" Content-Disposition: inline In-Reply-To: <3FAECD0E.9020906@iweb.net.au> User-Agent: Mutt/1.4.1i cc: freebsd-questions@FreeBSD.org cc: Kris Kennaway Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 23:29:31 -0000 --bg08WKrSYDhXBjb5 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 09:56:06AM +1030, Andrew wrote: > Kris Kennaway wrote: >=20 > >On Mon, Nov 10, 2003 at 08:48:19AM +1030, Andrew wrote: > > > >>Sorry your correct it is version 5.1 > > > > > >1) Please don't top-post..see how this message has lost context from > >your original posting? > > > >2) Which packages can't you find, and where precisely are you looking? > > > >Kris >=20 >=20 >=20 > I have been following the the examples in the book > The Complete FreeBSD > Greg Lehey > there is no cdrecord, galeon, gpg, postfix, xtset, > then i carry on reading it said if you installed instant-workstation off= =20 > which i can not find either. OK, but you didn't answer the second part of my question. Where are you looking for these packages? > I have tryed the install with out these packages but then I can not=20 > copy over file > /usr/share/ske1/dot.bashrc This file is not part of FreeBSD, and packages do not install into this directory..are you sure that is the correct path? Kris --bg08WKrSYDhXBjb5 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rs3ZWry0BWjoQKURAtfbAKCO2w+es7LN/upNWvMJV9usfBmRfwCcDcgg h0xZ2E7LmaO6yYcVXhTeueM= =7hIS -----END PGP SIGNATURE----- --bg08WKrSYDhXBjb5-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 15:45:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 71A1316A4CE for ; Sun, 9 Nov 2003 15:45:22 -0800 (PST) Received: from InterJet.dellroad.org (public.cpe.mvllo.al.charter.com [24.196.18.187]) by mx1.FreeBSD.org (Postfix) with ESMTP id F318B43FAF for ; Sun, 9 Nov 2003 15:45:19 -0800 (PST) (envelope-from archie@dellroad.org) Received: from arch20m.dellroad.org (arch20m.dellroad.org [10.2.2.20]) by InterJet.dellroad.org (8.9.1a/8.9.1) with ESMTP id PAA29736; Sun, 9 Nov 2003 15:37:34 -0800 (PST) Received: from arch20m.dellroad.org (localhost [127.0.0.1]) by arch20m.dellroad.org (8.12.8/8.12.6) with ESMTP id hA9NbXdh003785; Sun, 9 Nov 2003 15:37:33 -0800 (PST) (envelope-from archie@arch20m.dellroad.org) Received: (from archie@localhost) by arch20m.dellroad.org (8.12.8/8.12.8/Submit) id hA9NbWAZ003784; Sun, 9 Nov 2003 17:37:32 -0600 (CST) From: Archie Cobbs Message-Id: <200311092337.hA9NbWAZ003784@arch20m.dellroad.org> In-Reply-To: <1068334731.37279.19.camel@shumai.marcuscom.com> To: Joe Marcus Clarke Date: Sun, 9 Nov 2003 17:37:32 -0600 (CST) X-Mailer: ELM [version 2.4ME+ PL99b (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII cc: questions@FreeBSD.ORG Subject: Re: MPD problems connecting to a Cisco 3000 concentrator X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 09 Nov 2003 23:45:22 -0000 Joe Marcus Clarke wrote: > I'm trying to establish an encrypted PPTP connection to a Cisco VPN > concentrator using mpd-3.14. It works fine when I disable all > encryption, but with even 40-bit stateless, I get errors like: > > [vpn] LCP: rec'd Protocol Reject #2 link 0 (Opened) > [vpn] LCP: protocol 0x32f7 was rejected > [vpn] LCP: rec'd Protocol Reject #10 link 0 (Opened) > [vpn] LCP: protocol 0xa785 was rejected > [vpn] LCP: rec'd Protocol Reject #11 link 0 (Opened) > [vpn] LCP: protocol 0x5a41 was rejected > [vpn] LCP: rec'd Protocol Reject #12 link 0 (Opened) > [vpn] LCP: protocol 0x5ceb was rejected Almost certain that either the MPD side is incorrectly decrypting the packets or the Cisco side is incorrectly encrypting them. All known MPD bugs in this regard are fixed in the latest version of MPD & FreeBSD... try upgrading the Cisco box?? Or try MS-CHAPv1 instead of v2? -Archie __________________________________________________________________________ Archie Cobbs * Halloo Communications * http://www.halloo.com From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:00:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B266216A4CE for ; Sun, 9 Nov 2003 16:00:45 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id DD02743FEA for ; Sun, 9 Nov 2003 16:00:34 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hAA003o2017741; Sun, 9 Nov 2003 19:00:04 -0500 (EST) Message-Id: <6.0.0.22.0.20031109184658.02f673b0@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 09 Nov 2003 19:00:28 -0500 To: Luke Kearney From: Marty Landman In-Reply-To: <20031110072322.8868.LUKEK@meibin.net> References: <20031109235155.8861.LUKEK@meibin.net> <6.0.0.22.0.20031109102036.04408558@pop.face2interface.com> <20031110072322.8868.LUKEK@meibin.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:00:46 -0000 At 05:29 PM 11/9/2003, Luke Kearney wrote: >OK I think I see the problem. Your winblows machines are on a different >network to the FBSD machine. Change FBSD to 192.168.0.7 and all should >be just fine. Very cool Luke; this worked and my FBSD box now can ping my Windoz boxes and vice versa. >There is no route to host for the other machines because >as far as FBSD is concerned the other machines should be on a different >wire. So that third node on the IP addr represents what, the switch? IOW you're saying since all the other boxes on the LAN are 192.168.0.nnn the FBSD box needed to be as well? I probably should've noticed the inconsistency myself and realized that might not be the right thing. > > >in your rc.conf > > > > > >firewall_enable="yes" > >the above was a typo on my part. should have been enable="no". Heh, glad you reminded me. I'd been doing #ipfw disable firewall after rebooting to get around the permission denied thing. :) Funny the stuff beginners do. I also have now been able to read and write to the same floppy on both a windoz box and the fbsd box so at least have some small semblance of communications going. >Nevertheless I think once you re-ip you will be pinging away quite nicely. Thanks again. Now, could you give me an idea of the next step, i.e. how do I go about setting up shares, or if this is the easiest I'd be quite happy just being able to telnet into the fbsd box. I now get "connection refused" when trying to telnet into fbsd from a windoz box but of course that's probably to be expected cuz I don't know what preparation is needed on the fbsd box. Just to give an overview of my network, three of my four windoz boxes all run vnc (fm. ATT England) at startup allowing me to do the equivalent sort of running vncviewer into them from my fourth box. Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:05:27 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2C10216A4CE for ; Sun, 9 Nov 2003 16:05:27 -0800 (PST) Received: from res241015.resnet.wsu.edu (res241015.resnet.wsu.edu [134.121.241.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id EED7943F85 for ; Sun, 9 Nov 2003 16:05:25 -0800 (PST) (envelope-from james_jacobsen@lycos.co.uk) Received: from res241015.resnet.wsu.edu (localhost [127.0.0.1]) hAA03ZIh000682 for ; Sun, 9 Nov 2003 16:03:36 -0800 (PST) (envelope-from james_jacobsen@lycos.co.uk) Date: Sun, 9 Nov 2003 16:03:35 -0800 From: James Jacobsen To: freebsd-questions@freebsd.org Message-ID: <20031110000335.GA619@res241015.resnet.wsu.edu> References: Mime-Version: 1.0 Content-Type: text/plain; Format=Flowed; DelSp=Yes; charset=ISO-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: (from missive@hotmail.com on Sun, Nov 09, 2003 at 05:28:15 -0800) X-Mailer: Balsa 2.0.15 Lines: 52 Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:05:27 -0000 I installed linux_dri and that did the trick. The game runs badly, I get horrible lag, but I think it my be the network. My X server also has problems at resolution at 1024x768, it tends to freze up the whole system, well at least the terminals. And when using dri, the X server can only be started once, if I close it and restart it agian it doesn't work correctly. Rebooting it fixes it. I will try a local game with a friend later. Thanks for the help. --James On 11/09/03 05:28:15, Lee Harr wrote: >> I am tring to run Enemy Territory using linux emulation, and the >> program >> fails telling my it can't find libGL.so.1. I believe I need the linux >> version of this library, but I don't know where to get it. Any help >> would >> be great. >> > > # cat /usr/ports/graphics/linux_mesa3/pkg-plist > usr/X11R6/lib/libGL.so.%%GL_MAJOR_VER%%.%%GL_MINOR_VER%%.0 > usr/X11R6/lib/libGL.so.%%GL_MAJOR_VER%% > usr/X11R6/lib/libGL.so > [...] > > # cat /usr/ports/graphics/linux_glx/pkg-plist > lib/libGL.so > lib/libGL.so.1 > [...] > > # cat /usr/ports/graphics/linux_dri/pkg-plist > usr/X11R6/bin/gears > usr/X11R6/bin/glxinfo > usr/X11R6/lib/libGL.so.1 > [...] > > I am not sure which one is the one you want.... Maybe the pkg-descr > files will help you to decide. > > _________________________________________________________________ > Tired of spam? Get advanced junk mail protection with MSN 8. > http://join.msn.com/?page=features/junkmail > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd. > org" > -- God made the integers; all else is the work of Man. -- Kronecker From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:07:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9614516A4CE for ; Sun, 9 Nov 2003 16:07:13 -0800 (PST) Received: from smtp6.jaring.my (smtp6.jaring.my [61.6.32.56]) by mx1.FreeBSD.org (Postfix) with ESMTP id 328F743FB1 for ; Sun, 9 Nov 2003 16:07:12 -0800 (PST) (envelope-from ksham@pd.jaring.my) Received: from j166.kst50.jaring.my (j166.kst50.jaring.my [61.6.174.180]) by smtp6.jaring.my (8.12.10/8.12.10) with ESMTP id hAA075Sb076454 for ; Mon, 10 Nov 2003 08:07:06 +0800 (MYT) (envelope-from ksham@pd.jaring.my) Date: Mon, 10 Nov 2003 08:05:19 +0800 (MYT) From: sham khalil X-X-Sender: ksham@shmbsd5.kopiesatu.com To: freebsd-questions@freebsd.org Message-ID: <20031110075104.R556@shmbsd5.kopiesatu.com> MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="0-1936266479-1068422719=:556" Subject: Openoffice install error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:07:13 -0000 This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. --0-1936266479-1068422719=:556 Content-Type: TEXT/PLAIN; charset=US-ASCII i want to install openoffice on my FreeBSD-4.9-RELEASE my /usr is only 3.1G, it said I need 4G so i put my /usr/ports into /home which i have plenty of space /usr/ports -> /home/ports i can't install openoffice with both command, make install and portinstall. error message is in the attachment thanks you. sham khalil --0-1936266479-1068422719=:556 Content-Type: TEXT/PLAIN; charset=US-ASCII; name="op.err" Content-Transfer-Encoding: BASE64 Content-ID: <20031110080519.T556@shmbsd5.kopiesatu.com> Content-Description: Content-Disposition: attachment; filename="op.err" RnJlZUJTRCBzaG1ic2Q0LmtzLmNvbSA0LjktUkVMRUFTRSBGcmVlQlNEIDQu OS1SRUxFQVNFICMwOiBUaHUgTm92ICA2IDExOjI0OjM1IE1ZVCAyMDAzICAg ICByb290QHNobWJzZDQua3MuY29tOi91c3Ivb2JqL3Vzci9zcmMvc3lzL1NI TUJTRDQgIGkzODYNCg0KbHMgL3Zhci9kYi9wa2cNCj09PT09PT09PT09PT09 DQogIA0KSW1hZ2VNYWdpY2stNS41LjcuMTFfMQ0KT1JCaXQtMC41LjE3XzEN ClhGcmVlODYtNC4zLjAsMQ0KWEZyZWU4Ni1Gb250U2VydmVyLTQuMy4wXzIN ClhGcmVlODYtTmVzdFNlcnZlci00LjMuMF8zDQpYRnJlZTg2LVByaW50U2Vy dmVyLTQuMy4wXzENClhGcmVlODYtU2VydmVyLTQuMy4wXzExDQpYRnJlZTg2 LVZpcnR1YWxGcmFtZWJ1ZmZlclNlcnZlci00LjMuMF8zDQpYRnJlZTg2LWNs aWVudHMtNC4zLjBfMw0KWEZyZWU4Ni1kb2N1bWVudHMtNC4zLjANClhGcmVl ODYtZm9udDEwMGRwaS00LjMuMA0KWEZyZWU4Ni1mb250NzVkcGktNC4zLjAN ClhGcmVlODYtZm9udEN5cmlsbGljLTQuMy4wDQpYRnJlZTg2LWZvbnREZWZh dWx0Qml0bWFwcy00LjMuMA0KWEZyZWU4Ni1mb250RW5jb2RpbmdzLTQuMy4w DQpYRnJlZTg2LWZvbnRTY2FsYWJsZS00LjMuMA0KWEZyZWU4Ni1saWJyYXJp ZXMtNC4zLjBfNg0KWGF3M2QtMS41DQpYZnQtMi4xLjINCmFjcm9yZWFkLTUu MDgNCmFwYWNoZS1hbnQtMS41LjRfMQ0KYXRrLTEuNC4xXzENCmF1dG9jb25m LTIuMTMuMDAwMjI3XzUNCmF1dG9jb25mLTIuNTNfMQ0KYXV0b21ha2UtMS40 LjVfOQ0KYmlzb24tMS43NV8xDQpiaXRtYXAtZm9udHMtMS4wDQpib25vYm8t MS4wLjIyDQpjdnN1cC13aXRob3V0LWd1aS0xNi4xaA0KZGJoLTEuMC4xNw0K ZG9jYm9vay1zay00LjEuMl8xDQpkb2Nib29rLXhtbC00LjJfMQ0KZG9jYm9v ay14c2wtMS42Mi4zDQplc291bmQtMC4yLjMyXzENCmV4cGF0LTEuOTUuNl8x DQplem0zLTEuMQ0KZm9udGNvbmZpZy0yLjIuOTBfMw0KZnJlZXR5cGUyLTIu MS41XzENCmdhbC0wLjI0DQpnY2MtMy4yLjMNCmdjb25mLTEuMC45XzYNCmdk Ym0tMS44LjMNCmdkay1waXhidWYtMC4yMi4wDQpnZXR0ZXh0LTAuMTIuMQ0K Z2hvc3RzY3JpcHQtZ251LTcuMDdfNA0KZ2xpYi0xLjIuMTBfMTANCmdsaWIt Mi4yLjMNCmdtYWtlLTMuODBfMQ0KZ25vbWViYXNpYy0wLjAuMjANCmdub21l Y2FudmFzLTAuMjIuMA0KZ25vbWVkYi0wLjIuOTZfMQ0KZ25vbWVoaWVyLTEu MF8xMA0KZ25vbWVsaWJzLTEuNC4yXzENCmdub21lbWltZWRhdGEtMi40LjAN Cmdub21lcHJpbnQtMC4zNw0KZ25vbWV2ZnMtMS4wLjVfNA0KZ251bWVyaWMt MS4wLjEzDQpncXZpZXctMS4yLjJfMQ0KZ3RrLTEuMi4xMF8xMA0KZ3RrLTIu Mi40XzENCmd0ay14ZmNlLWVuZ2luZS0yLjEuNg0KZ3VpbGUtMS42LjRfMg0K Z3VwcGktMC40MC4zXzMNCmd2LTMuNS44XzMNCmhkZi00LjFyNQ0KaGVscDJt YW4tMS4yOQ0KaW1ha2UtNC4zLjBfMQ0KaW1saWItMS45LjE0XzENCmludGx0 b29sLTAuMjcuMg0KamFzcGVyLTEuNzAwLjINCmphdmF2bXdyYXBwZXItMS40 DQpqYmlna2l0LTEuNQ0KanBlZy02Yl8xDQpsY21zLTEuMDksMQ0KbGliSURM LTAuOC4yDQpsaWJhdWRpb2ZpbGUtMC4yLjQNCmxpYmZweC0xLjIuMC45DQps aWJnZGEtMC4yLjk2XzENCmxpYmdsYWRlLTAuMTdfMg0KbGliZ251Z2V0b3B0 LTEuMg0KbGliaWNvbnYtMS45LjFfMw0KbGlibHRkbC0xLjUNCmxpYm1pa21v ZC0zLjEuMTBfMQ0KbGlibW5nLTEuMC41XzENCmxpYm1wZWcyLTAuMy4xXzEN CmxpYm9nZy0xLjBfMSwzDQpsaWJvbGUyLTAuMi40DQpsaWJzaWRwbGF5LTEu MzYuNTcNCmxpYnRvb2wtMS4zLjVfMQ0KbGlidW5naWYtNC4xLjBiMV8xDQps aWJ1bmljb2RlLTAuNF8zDQpsaWJ2b3JiaXMtMS4wXzEsMw0KbGlid21mLTAu Mi44DQpsaWJ4ZmNlNGd1aS00LjAuMF8xDQpsaWJ4ZmNlNG1jcy00LjAuMA0K bGlieGZjZTR1dGlsLTQuMC4wDQpsaWJ4bWwtMS44LjE3XzENCmxpYnhtbDIt Mi42LjINCmxpYnhzbHQtMS4xLjANCmxpbmtzLTIuMS5wMTEsMQ0KbGludXgt YmxhY2tkb3duLWpkay0xLjMuMV8yDQpsaW51eC1zdW4tamRrLTEuMy4xLjA5 DQpsaW51eF9iYXNlLTgtOC4wXzENCm00LTEuNF8xDQptb3ppbGxhLTEuNV8x LDINCm1vemlsbGEtZmlyZWJpcmQtMC43XzENCm1wZzEyMy0wLjU5cl85DQpu c3ByLTQuM18yDQpvYWYtMC42LjEwXzENCnBhbmdvLTEuMi41DQpwa2djb25m aWctMC4xNS4wDQpwa2dkYi5kYg0KcGx1Z2dlci00LjBfMw0KcG5nLTEuMi41 XzINCnBvcHQtMS42LjRfMQ0KcG9ydHVwZ3JhZGUtMjAwMzA3MjMNCnBzaWNv bnYtMC44LjNfMQ0KcHl0aG9uLTIuMy4yXzINCnJwbS0zLjAuNl84DQpydWJ5 LTEuNi44LjIwMDMuMTAuMTUNCnJ1YnktYmRiMS0wLjIuMQ0KcnVieS1yZG9j LTAuOS4wDQpydWJ5LXNoaW0tcnVieTE4LTEuOC4xLnAyDQpzY3JvbGxrZWVw ZXItMC4zLjEyXzQsMQ0Kc2RvY2Jvb2steG1sLTQuMS4yLjVfMQ0Kc2lkcGxh eS0xLjAuOQ0Kc3RhcnR1cC1ub3RpZmljYXRpb24tMC41XzENCnRpZmYtMy42 LjANCnRpbWlkaXR5KystMi4xMS4zXzENCnVuemlwLTUuNTBfMg0KdXJ3Zm9u dHMtMS4wDQp1cndmb250cy10dGYtMS4wLjdiMTgNCndhdnBsYXktMS40DQp3 cmFwcGVyLTEuMF8zDQp4YW5pbS0yLjkyLjANCnhmY2UtNC4wLjANCnhmY2U0 LWRlc2t0b3AtNC4wLjBfMQ0KeGZjZTQtZm0tNC4wLjBfMQ0KeGZjZTQtZm0t aWNvbnMtNC4wLjANCnhmY2U0LWljb25ib3gtNC4wLjBfMQ0KeGZjZTQtbWNz LW1hbmFnZXItNC4wLjBfMQ0KeGZjZTQtbWNzLXBsdWdpbnMtNC4wLjBfMQ0K eGZjZTQtbWl4ZXItNC4wLjBfMQ0KeGZjZTQtcGFuZWwtNC4wLjBfMQ0KeGZj ZTQtcGFuZWwtdGhlbWVzLTQuMC4wDQp4ZmNlNC1wcmludC00LjAuMF8xDQp4 ZmNlNC1zeXN0cmF5LTQuMC4wXzENCnhmY2U0LXRveXMtNC4wLjBfMQ0KeGZj ZTQtdXRpbHMtNC4wLjBfMQ0KeGZjZTQtd20tNC4wLjBfMQ0KeGZjZTQtd20t dGhlbWVzLTQuMC4wDQp4bGh0bWwtMC41LjENCnhtbGNhdG1nci0xLjENCnht bXMtMS4yLjhfMQ0KeG1wLTIuMC40XzENCnppcC0yLjNfMQ0KICANCmRmIC1o IDoNCj09PT09PT0NCkZpbGVzeXN0ZW0gICAgU2l6ZSAgIFVzZWQgIEF2YWls IENhcGFjaXR5ICBNb3VudGVkIG9uDQovZGV2L2FkMHMyYSAgIDI1Mk0gICAg NjFNICAgMTcxTSAgICAyNiUgICAgLw0KL2Rldi9hZDBzNGUgICAgMTZHICAg NC40RyAgICAxMEcgICAgMzAlICAgIC9ob21lDQovZGV2L2FkMHMxICAgIDIu NEcgICAxOTBNICAgMi4zRyAgICAgOCUgICAgL21zZG9zDQovZGV2L2FkMHMy ZiAgIDI1Mk0gICA2LjBLICAgMjMyTSAgICAgMCUgICAgL3RtcA0KL2Rldi9h ZDBzMmcgICA0LjdHICAgMS4zRyAgIDMuMEcgICAgMzAlICAgIC91c3INCi9k ZXYvYWQwczJlICAgMjk1TSAgICAxOE0gICAyNTNNICAgICA3JSAgICAvdmFy DQpwcm9jZnMgICAgICAgIDQuMEsgICA0LjBLICAgICAwQiAgIDEwMCUgICAg L3Byb2MNCiANCiANCmluc3RhbGwgY29tYW5kOiBtYWtlIGluc3RhbGwgY2xl YW4NCj09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0gDQogDQou Li8uLi8uLi9kaXN0L2luY2x1ZGUvZG9jc2hlbGwvbnNJRG9jU2hlbGwuaDo3 NTA6IHZpcnR1YWwgb3V0c2lkZSBjbGFzcw0KICAgZGVjbGFyYXRpb24NCi4u Ly4uLy4uL2Rpc3QvaW5jbHVkZS9kb2NzaGVsbC9uc0lEb2NTaGVsbC5oOjc1 MDogZnVuY3Rpb24gYG5zcmVzdWx0DQogICBTZXRTY2hlbWUoY29uc3QgbnNB U3RyaW5nJiknIGlzIGluaXRpYWxpemVkIGxpa2UgYSB2YXJpYWJsZQ0KLi4v Li4vLi4vZGlzdC9pbmNsdWRlL2RvY3NoZWxsL25zSURvY1NoZWxsLmg6NzUy OiBzeW50YXggZXJyb3IgYmVmb3JlIGB9JyB0b2tlbg0KLi4vLi4vLi4vZGlz dC9pbmNsdWRlL2RvY3NoZWxsL25zSURvY1NoZWxsLmg6Nzg0OjExOiB3YXJu aW5nOiBubyBuZXdsaW5lIGF0IGVuZA0Kb2YgZmlsZQ0KLi4vLi4vLi4vZGlz dC9pbmNsdWRlL2RvY3NoZWxsL25zSURvY1NoZWxsLmg6NzExOjE6IHVudGVy bWluYXRlZCAjaWZuZGVmDQpuc09ic2VydmVyQmFzZS5jcHA6IEluIG1lbWJl ciBmdW5jdGlvbiBgdmlydHVhbCBuc3Jlc3VsdA0KICAgbnNPYnNlcnZlckJh c2U6Ok5vdGlmeVdlYlNoZWxsKG5zSVN1cHBvcnRzKiwgbnNJU3VwcG9ydHMq LCBjb25zdCBjaGFyKiwNCiAgIGludCknOg0KbnNPYnNlcnZlckJhc2UuY3Bw Ojc2OiBgbnNJRG9jU2hlbGwnIHVuZGVjbGFyZWQgKGZpcnN0IHVzZSB0aGlz IGZ1bmN0aW9uKQ0KbnNPYnNlcnZlckJhc2UuY3BwOjc2OiAoRWFjaCB1bmRl Y2xhcmVkIGlkZW50aWZpZXIgaXMgcmVwb3J0ZWQgb25seSBvbmNlIGZvcg0K ICAgZWFjaCBmdW5jdGlvbiBpdCBhcHBlYXJzIGluLikNCm5zT2JzZXJ2ZXJC YXNlLmNwcDo3NjogdGVtcGxhdGUgYXJndW1lbnQgMSBpcyBpbnZhbGlkDQpu c09ic2VydmVyQmFzZS5jcHA6NzY6IElTTyBDKysgZm9yYmlkcyBkZWNsYXJh dGlvbiBvZiBgZG9jc2hlbGwnIHdpdGggbm8gdHlwZQ0KbnNPYnNlcnZlckJh c2UuY3BwOjc2OiBjYW5ub3QgY29udmVydCBgY29uc3QgbnNRdWVyeUludGVy ZmFjZScgdG8gYGludCcgaW4NCiAgIGluaXRpYWxpemF0aW9uDQpuc09ic2Vy dmVyQmFzZS5jcHA6Nzk6IGludmFsaWQgY29udmVyc2lvbiBmcm9tIGBpbnQn IHRvIGBuc0lTdXBwb3J0cyonDQpuc09ic2VydmVyQmFzZS5jcHA6Nzk6ICAg aW5pdGlhbGl6aW5nIGFyZ3VtZW50IDEgb2YgYGNvbnN0IG5zUXVlcnlJbnRl cmZhY2UNCiAgIGRvX1F1ZXJ5SW50ZXJmYWNlKG5zSVN1cHBvcnRzKiwgbnNy ZXN1bHQqKScNCntzdGFuZGFyZCBpbnB1dH06IEFzc2VtYmxlciBtZXNzYWdl czoNCntzdGFuZGFyZCBpbnB1dH06MTM6IEVycm9yOiBzeW1ib2wgYEdldEZv cm0nIGlzIGFscmVhZHkgZGVmaW5lZA0KZ21ha2VbNF06ICoqKiBbbnNPYnNl cnZlckJhc2Uub10gRXJyb3IgMQ0KZ21ha2VbNF06IExlYXZpbmcgZGlyZWN0 b3J5IGAvaG9tZS9wb3J0cy9lZGl0b3JzL29wZW5vZmZpY2Uvd29yay9tb3pp bGxhL3dvcmsvbW8NCnppbGxhL2ludGwvY2hhcmRldC9zcmMnDQpnbWFrZVsz XTogKioqIFtsaWJzXSBFcnJvciAyDQpnbWFrZVszXTogTGVhdmluZyBkaXJl Y3RvcnkgYC9ob21lL3BvcnRzL2VkaXRvcnMvb3Blbm9mZmljZS93b3JrL21v emlsbGEvd29yay9tbw0KemlsbGEvaW50bC9jaGFyZGV0Jw0KZ21ha2VbMl06 ICoqKiBbbGlic10gRXJyb3IgMg0KZ21ha2VbMl06IExlYXZpbmcgZGlyZWN0 b3J5IGAvaG9tZS9wb3J0cy9lZGl0b3JzL29wZW5vZmZpY2Uvd29yay9tb3pp bGxhL3dvcmsvbW8NCnppbGxhL2ludGwnDQpnbWFrZVsxXTogKioqIFt0aWVy XzldIEVycm9yIDINCmdtYWtlWzFdOiBMZWF2aW5nIGRpcmVjdG9yeSBgL2hv bWUvcG9ydHMvZWRpdG9ycy9vcGVub2ZmaWNlL3dvcmsvbW96aWxsYS93b3Jr L21vDQp6aWxsYScNCmdtYWtlOiAqKiogW2RlZmF1bHRdIEVycm9yIDINCioq KiBFcnJvciBjb2RlIDINClN0b3AgaW4gL2hvbWUvcG9ydHMvZWRpdG9ycy9v cGVub2ZmaWNlL3dvcmsvbW96aWxsYS4NCioqKiBFcnJvciBjb2RlIDENClN0 b3AgaW4gL2hvbWUvcG9ydHMvZWRpdG9ycy9vcGVub2ZmaWNlLg0KKioqIEVy cm9yIGNvZGUgMQ0KU3RvcCBpbiAvaG9tZS9wb3J0cy9lZGl0b3JzL29wZW5v ZmZpY2UuDQoqKiogRXJyb3IgY29kZSAxDQpTdG9wIGluIC9ob21lL3BvcnRz L2VkaXRvcnMvb3Blbm9mZmljZS4NCg0KICANCmluc3RhbGwgY29tYW5kOiBw b3J0aW5zdGFsbCAtclIgb3Blbm9mZmljZQ0KPT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09IA0KDQpjb25zb2xlOg0KPT09PT09 PT0NCg0Kc2htYnNkNCMgTm92IDEwIDA1OjI4OjE3IHNobWJzZDQgL2tlcm5l bDogcGlkIDExNDAwIChqYXZhYyksIHVpZCAwOiBleGl0ZWQgb24gc2kNCmdu YWwgNiAoY29yZSBkdW1wZWQpDQpOb3YgMTAgMDU6MzE6MTMgc2htYnNkNCBz bS1tc3AtcXVldWVbMjM4NTJdOiBoQTlMVkQwQTAyMzg1MjogU1lTRVJSKHJv b3QpOiBmaWxsXw0KZmQ6IGRpc2Nvbm5lY3Q6IGZkIDEgbm90IG9wZW46IEJh ZCBmaWxlIGRlc2NyaXB0b3INCk5vdiAxMCAwNTozMToxMyBzaG1ic2Q0IHNt LW1zcC1xdWV1ZVsyMzg1Ml06IGhBOUxWRDBBMDIzODUyOiBTWVNFUlIocm9v dCk6IGZpbGxfDQpmZDogZGlzY29ubmVjdDogY2Fubm90IG9wZW4gL2Rldi9u dWxsOiBQZXJtaXNzaW9uIGRlbmllZA0KTm92IDEwIDA2OjAxOjEzIHNobWJz ZDQgc20tbXNwLXF1ZXVlWzMzMTI4XTogaEE5TTFEMEEwMzMxMjg6IFNZU0VS Uihyb290KTogZmlsbF8NCmZkOiBkaXNjb25uZWN0OiBmZCAxIG5vdCBvcGVu OiBCYWQgZmlsZSBkZXNjcmlwdG9yDQpOb3YgMTAgMDY6MDE6MTMgc2htYnNk NCBzbS1tc3AtcXVldWVbMzMxMjhdOiBoQTlNMUQwQTAzMzEyODogU1lTRVJS KHJvb3QpOiBmaWxsXw0KZmQ6IGRpc2Nvbm5lY3Q6IGNhbm5vdCBvcGVuIC9k ZXYvbnVsbDogUGVybWlzc2lvbiBkZW5pZWQNCk5vdiAxMCAwNjozMToxMyBz aG1ic2Q0IHNtLW1zcC1xdWV1ZVs0NzY2N106IGhBOU1WRDBBMDQ3NjY3OiBT WVNFUlIocm9vdCk6IGZpbGxfDQpmZDogZGlzY29ubmVjdDogZmQgMSBub3Qg b3BlbjogQmFkIGZpbGUgZGVzY3JpcHRvcg0KTm92IDEwIDA2OjMxOjEzIHNo bWJzZDQgc20tbXNwLXF1ZXVlWzQ3NjY3XTogaEE5TVZEMEEwNDc2Njc6IFNZ U0VSUihyb290KTogZmlsbF8NCmZkOiBkaXNjb25uZWN0OiBjYW5ub3Qgb3Bl biAvZGV2L251bGw6IFBlcm1pc3Npb24gZGVuaWVkDQpOb3YgMTAgMDY6MzQ6 NTIgc2htYnNkNCAva2VybmVsOiBwaWQgNTg5MDQgKGphdmFjKSwgdWlkIDA6 IGV4aXRlZCBvbiBzaWduYWwgNiAoYw0Kb3JlIGR1bXBlZCkNCk5vdiAxMCAw NzowMToxNCBzaG1ic2Q0IHNtLW1zcC1xdWV1ZVs1ODk4MF06IGhBOU4xRTBB MDU4OTgwOiBTWVNFUlIocm9vdCk6IGZpbGxfDQpmZDogZGlzY29ubmVjdDog ZmQgMSBub3Qgb3BlbjogQmFkIGZpbGUgZGVzY3JpcHRvcg0KTm92IDEwIDA3 OjAxOjE0IHNobWJzZDQgc20tbXNwLXF1ZXVlWzU4OTgwXTogaEE5TjFFMEEw NTg5ODA6IFNZU0VSUihyb290KTogZmlsbF8NCmZkOiBkaXNjb25uZWN0OiBj YW5ub3Qgb3BlbiAvZGV2L251bGw6IFBlcm1pc3Npb24gZGVuaWVkDQoNCnRl cm1pbmFsOg0KPT09PT09PT0NCnhtbC9xZS9HZW5lcmF0b3JIZWFwLmphdmEg ICAgICAgeG1sL3FlL0hpdFN0b3JlLmphdmEgICAgICAgICAgICB4bWwvcWUv TXVsdGlUb2tlDQpuTG9jYXRvci5qYXZhICAgICAgICAgICB4bWwvcWUvTmV4 dERvY0dlbmVyYXRvci5qYXZhICAgICAgICAgICAgeG1sL3FlL05leHREb2NH ZQ0KbmVyYXRvckhlYXAuamF2YSAgICAgICAgeG1sL3FlL1F1ZXJ5LmphdmEg ICAgICAgeG1sL3FlL1F1ZXJ5RmFjdG9yeUltcGwuamF2YQ0KICAgICAgICB4 bWwvcWUvUXVlcnlIaXQuamF2YSAgICAgICAgICAgIHhtbC9xZS9RdWVyeUhp dERhdGEuamF2YSAgICAgICAgeG1sL3FlL1ENCnVlcnlIaXRJdGVyYXRvci5q YXZhICAgICAgICAgICAgeG1sL3FlL1F1ZXJ5UHJvY2Vzc29yLmphdmEgICAg ICB4bWwvcWUvUXVlcnlQcm9jDQplc3NvckltcGwuamF2YSAgICAgICAgICB4 bWwvcWUvUXVlcnlSZXN1bHRzLmphdmEgICAgICAgIHhtbC9xZS9RdWVyeVN0 YXRlbWVudC5qYQ0KdmEgICAgICB4bWwvcWUvUm9sZUZpbGxlci5qYXZhICAg ICAgICAgIHhtbC9xZS9TZWFyY2guamF2YQ0KT1VDSDogbmVzdGVkIG1lbW9y eSBjb2RlLCB0byAxIGxldmVscy4NCkFib3J0IChjb3JlIGR1bXBlZCkNCmRt YWtlOiAgRXJyb3IgY29kZSAxMzQsIHdoaWxlIG1ha2luZyAnLi4vLi4vLi4v Li4vdW54ZmJzZC5wcm8vbWlzYy9jb21fc3VuX3htbHNlDQphcmNoX2R1bW15 LmphdmEnDQotLS0qIFRHX1NMTy5NSyAqLS0tDQpFUlJPUjogRXJyb3IgNjUy ODAgb2NjdXJyZWQgd2hpbGUgbWFraW5nIC9ob21lL3BvcnRzL2VkaXRvcnMv b3Blbm9mZmljZS93b3JrL29vXw0KMS4wLjNfc3JjL1htbFNlYXJjaC9zcmMv Y29tL3N1bi94bWxzZWFyY2gNCmRtYWtlOiAgRXJyb3IgY29kZSAxLCB3aGls ZSBtYWtpbmcgJ2J1aWxkX2FsbCcNCi0tLSogVEdfU0xPLk1LICotLS0NCioq KiBFcnJvciBjb2RlIDI1NQ0KU3RvcCBpbiAvaG9tZS9wb3J0cy9lZGl0b3Jz L29wZW5vZmZpY2UuDQoqKiBDb21tYW5kIGZhaWxlZCBbZXhpdCBjb2RlIDFd OiAvdXNyL2Jpbi9zY3JpcHQgLXFhIC90bXAvcG9ydGluc3RhbGwyOTYxLjIw IG1haw0KZQ0KKiogRml4IHRoZSBwcm9ibGVtIGFuZCB0cnkgYWdhaW4uDQoq KiBUaGUgZm9sbG93aW5nIHBhY2thZ2VzIHdlcmUgbm90IGluc3RhbGxlZCBv ciB1cGdyYWRlZCAoKjpza2lwcGVkIC8gITpmYWlsZWQpDQogICAgICAgICEg ZWRpdG9ycy9vcGVub2ZmaWNlICAgIChsaW5rZXIgZXJyb3IpDQoNCg0K --0-1936266479-1068422719=:556-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:08:41 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 06FD516A4CE for ; Sun, 9 Nov 2003 16:08:41 -0800 (PST) Received: from ozlabs.org (ozlabs.org [203.10.76.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id D2E0743FA3 for ; Sun, 9 Nov 2003 16:08:39 -0800 (PST) (envelope-from grog@lemis.com) Received: from blackwater.lemis.com (blackwater.lemis.com [192.109.197.80]) by ozlabs.org (Postfix) with ESMTP id 00F192BD35 for ; Mon, 10 Nov 2003 11:08:38 +1100 (EST) Received: by blackwater.lemis.com (Postfix, from userid 1004) id 0F12C511FC; Mon, 10 Nov 2003 10:38:36 +1030 (CST) Date: Mon, 10 Nov 2003 10:38:35 +1030 From: Greg 'groggy' Lehey To: Jonathan Chen Message-ID: <20031110000835.GD77527@wantadilla.lemis.com> References: <200311070220.hA72KUQF057797@mailserver3.hushmail.com> <20031107051703.GB7396@grimoire.chen.org.nz> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="tqI+Z3u+9OQ7kwn0" Content-Disposition: inline In-Reply-To: <20031107051703.GB7396@grimoire.chen.org.nz> User-Agent: Mutt/1.4.1i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 cc: Chad McCullough cc: questions@freebsd.org Subject: Re: Would like to volunteer my time...... X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:08:41 -0000 --tqI+Z3u+9OQ7kwn0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Friday, 7 November 2003 at 18:17:03 +1300, Jonathan Chen wrote: > On Thu, Nov 06, 2003 at 06:20:29PM -0800, Chad McCullough wrote: >> >> I'm hoping that I'm sending this email to the correct address. >> >> I visit the FreeBSD Personal Pages section of the FreeBSD website located >> at http://www.freebsd.org/gallery/pgallery.html quite often. I've noticed >> that, unfortunately, there are many broken links on the page. I know >> the FreeBSD team is extremely busy and keeping this page updated is most >> likely very low on the list of priorities. I would like to volunteer >> my time to keep the page updated on a continued basis. I'm not sure >> if this is something that the FreeBSD team would allow but I would love >> to give something back. > > All you've got to do is to cvsup a copy of the www tree off FreeBSD > and submit your changes (diff's are the preferred method) using > send-pr. If the reviewers like what you submit it'll get committed. In addition, do it often enough and well enough, and somebody will probably punish you by making you a doc committer :-) Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. --tqI+Z3u+9OQ7kwn0 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (FreeBSD) iD8DBQE/rtcDIubykFB6QiMRAv67AJ0TDyYaNrew3J3FEI8tzGCqFYkdFgCgozQu BbKybYZ7Q3xnpOsg/fCKn14= =05mc -----END PGP SIGNATURE----- --tqI+Z3u+9OQ7kwn0-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:11:09 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C60D716A4CE for ; Sun, 9 Nov 2003 16:11:09 -0800 (PST) Received: from x14.quik.com (x14.quik.com [216.176.28.114]) by mx1.FreeBSD.org (Postfix) with ESMTP id 08F3E43F3F for ; Sun, 9 Nov 2003 16:11:09 -0800 (PST) (envelope-from jimwatts@quik.com) Received: (from root@localhost) by x14.quik.com (8.12.9-20030926/8.12.5) id hAA0B8l7018978 for freebsd-questions@freebsd.org.qbigmail; Sun, 9 Nov 2003 16:11:08 -0800 Received: from quik.com (dialup-ras6-206.pdx.or.uspops.net [216.239.177.206]) (authenticated bits=0) by x14.quik.com (8.12.9-20030926/8.12.5) with ESMTP id hAA0B7kY018970 for ; Sun, 9 Nov 2003 16:11:08 -0800 Message-ID: <3FAE2E06.40608@quik.com> Date: Sun, 09 Nov 2003 04:07:34 -0800 From: james User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.1) Gecko/20020826 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: where do you find X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:11:09 -0000 the topics that are posted on the e mail From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:16:29 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C12B216A4CE for ; Sun, 9 Nov 2003 16:16:29 -0800 (PST) Received: from ms-smtp-03-eri0.southeast.rr.com (ms-smtp-03-lbl.southeast.rr.com [24.25.9.102]) by mx1.FreeBSD.org (Postfix) with ESMTP id 49D0C43F93 for ; Sun, 9 Nov 2003 16:16:28 -0800 (PST) (envelope-from marcus@marcuscom.com) Received: from creme-brulee.marcuscom.com (rdu74-159-108.nc.rr.com [24.74.159.108])hAA0GOOi024486; Sun, 9 Nov 2003 19:16:24 -0500 (EST) Received: from [192.168.1.4] (shumai.marcuscom.com [192.168.1.4]) hAA0FcHE066670; Sun, 9 Nov 2003 19:15:38 -0500 (EST) (envelope-from marcus@marcuscom.com) From: Joe Marcus Clarke To: Archie Cobbs In-Reply-To: <200311092337.hA9NbWAZ003784@arch20m.dellroad.org> References: <200311092337.hA9NbWAZ003784@arch20m.dellroad.org> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-40ebfV7zSz6N/snbSEuc" Organization: MarcusCom, Inc. Message-Id: <1068423365.67992.19.camel@shumai.marcuscom.com> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Sun, 09 Nov 2003 19:16:05 -0500 X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on creme-brulee.marcuscom.com X-Virus-Scanned: Symantec AntiVirus Scan Engine cc: questions@FreeBSD.ORG Subject: Re: MPD problems connecting to a Cisco 3000 concentrator X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:16:29 -0000 X-List-Received-Date: Mon, 10 Nov 2003 00:16:29 -0000 --=-40ebfV7zSz6N/snbSEuc Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Sun, 2003-11-09 at 18:37, Archie Cobbs wrote: > Joe Marcus Clarke wrote: > > I'm trying to establish an encrypted PPTP connection to a Cisco VPN > > concentrator using mpd-3.14. It works fine when I disable all > > encryption, but with even 40-bit stateless, I get errors like: > >=20 > > [vpn] LCP: rec'd Protocol Reject #2 link 0 (Opened) > > [vpn] LCP: protocol 0x32f7 was rejected > > [vpn] LCP: rec'd Protocol Reject #10 link 0 (Opened) > > [vpn] LCP: protocol 0xa785 was rejected > > [vpn] LCP: rec'd Protocol Reject #11 link 0 (Opened) > > [vpn] LCP: protocol 0x5a41 was rejected > > [vpn] LCP: rec'd Protocol Reject #12 link 0 (Opened) > > [vpn] LCP: protocol 0x5ceb was rejected >=20 > Almost certain that either the MPD side is incorrectly decrypting the > packets or the Cisco side is incorrectly encrypting them. All known MPD > bugs in this regard are fixed in the latest version of MPD & FreeBSD... > try upgrading the Cisco box?? Or try MS-CHAPv1 instead of v2? The packets aren't even going out on the wire, so the problem looks to be on the mpd side encrypting the packets (that is, in my sniffer trace, I never see any GRE packets going out to the concentrator). All my pings are sourced from the mpd client side. Mpd-3.14 is the latest version, correct?=20 As for the CHAP, things work fine when using MS-CHAPv2 without encryption (at least I thought that's what was being used). I can try MS-CHAPv1, but what I'm really trying to do is help Will with his PPTP setup for access at school. I have VPN 3000s in my lab that I can do just about anything I want to, but Will has no access to his concentrator. Since the concentrator terminates Windows VPN sessions correctly, is there anything else on the mpd side I can look at? Thanks for your help. Joe >=20 > -Archie >=20 > _________________________________________________________________________= _ > Archie Cobbs * Halloo Communications * http://www.halloo.co= m --=20 PGP Key : http://www.marcuscom.com/pgp.asc --=-40ebfV7zSz6N/snbSEuc Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQA/rtjFb2iPiv4Uz4cRAoMjAKCHz97jnnbC58EXhq0c8RQ8NXdGLACfYlvr W4aF1w3d+ESEBzMPjQCqyIg= =SRjO -----END PGP SIGNATURE----- --=-40ebfV7zSz6N/snbSEuc-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:19:34 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D6F1A16A4CE for ; Sun, 9 Nov 2003 16:19:34 -0800 (PST) Received: from res241015.resnet.wsu.edu (res241015.resnet.wsu.edu [134.121.241.15]) by mx1.FreeBSD.org (Postfix) with ESMTP id E1E3643F3F for ; Sun, 9 Nov 2003 16:19:33 -0800 (PST) (envelope-from james_jacobsen@lycos.co.uk) Received: from res241015.resnet.wsu.edu (localhost [127.0.0.1]) hAA0HiIh000724; Sun, 9 Nov 2003 16:17:44 -0800 (PST) (envelope-from james_jacobsen@lycos.co.uk) Date: Sun, 9 Nov 2003 16:17:44 -0800 From: James Jacobsen To: jse@xmission.com Message-ID: <20031110001744.GC619@res241015.resnet.wsu.edu> References: <1068411181.3faea92d7a5d4@webmail.xmission.com> Mime-Version: 1.0 Content-Type: text/plain; Format=Flowed; DelSp=Yes; charset=ISO-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1068411181.3faea92d7a5d4@webmail.xmission.com> (from jse@xmission.com on Sun, Nov 09, 2003 at 12:53:01 -0800) X-Mailer: Balsa 2.0.15 Lines: 33 cc: questions@freebsd.org Subject: Re: Help programming printer X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:19:35 -0000 You may need to convert the output before printing it, also you may make the program able to use lpr. Just a thought. --James On 11/09/03 12:53:01, jse@xmission.com wrote: > > I am trying to port an old MS-DOS program and I have run into a > stumbling > > block. The Mess Dos program wrote directly to the printer. I can't > seem > > to find much information on how to print from a program. Can anyone > recommend information on a web page or a book that I can learn more? Or > am I just making this too hard? > > Thanks > -Scott > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd. > org" > > -- God made the integers; all else is the work of Man. -- Kronecker From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:23:40 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 182AE16A4CE for ; Sun, 9 Nov 2003 16:23:40 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3F6B443F85 for ; Sun, 9 Nov 2003 16:23:39 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hAA0N7o2002099; Sun, 9 Nov 2003 19:23:09 -0500 (EST) Message-Id: <6.0.0.22.0.20031109191916.03006658@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 09 Nov 2003 19:23:33 -0500 To: Luke Kearney From: Marty Landman Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:23:40 -0000 I take it back. Just able to ftp to the fbsd box from my xp workstation. Very easy and very cool. Maybe all this agita will be worth it after all? I'm telnetted in too. Ok, this is too easy now and I'm getting worried. ttyl, Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:25:03 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8D07516A4CF for ; Sun, 9 Nov 2003 16:25:03 -0800 (PST) Received: from ms-smtp-01-eri0.southeast.rr.com (ms-smtp-01-lbl.southeast.rr.com [24.25.9.100]) by mx1.FreeBSD.org (Postfix) with ESMTP id BEFEE43F75 for ; Sun, 9 Nov 2003 16:25:01 -0800 (PST) (envelope-from marcus@marcuscom.com) Received: from creme-brulee.marcuscom.com (rdu74-159-108.nc.rr.com [24.74.159.108])hAA0Ovgd001779; Sun, 9 Nov 2003 19:24:58 -0500 (EST) Received: from [192.168.1.4] (shumai.marcuscom.com [192.168.1.4]) hAA0OMHE066724; Sun, 9 Nov 2003 19:24:22 -0500 (EST) (envelope-from marcus@marcuscom.com) From: Joe Marcus Clarke To: Archie Cobbs In-Reply-To: <1068423365.67992.19.camel@shumai.marcuscom.com> References: <200311092337.hA9NbWAZ003784@arch20m.dellroad.org> <1068423365.67992.19.camel@shumai.marcuscom.com> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-LhDKq28Sd9nsMh4xrb5l" Organization: MarcusCom, Inc. Message-Id: <1068423889.67992.22.camel@shumai.marcuscom.com> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Sun, 09 Nov 2003 19:24:49 -0500 X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on creme-brulee.marcuscom.com X-Virus-Scanned: Symantec AntiVirus Scan Engine cc: questions@freebsd.org Subject: Re: MPD problems connecting to a Cisco 3000 concentrator X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:25:03 -0000 --=-LhDKq28Sd9nsMh4xrb5l Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Sun, 2003-11-09 at 19:16, Joe Marcus Clarke wrote: [snip] >=20 > As for the CHAP, things work fine when using MS-CHAPv2 without > encryption (at least I thought that's what was being used). I can try > MS-CHAPv1, but what I'm really trying to do is help Will with his PPTP > setup for access at school. I have VPN 3000s in my lab that I can do > just about anything I want to, but Will has no access to his > concentrator. Since the concentrator terminates Windows VPN sessions > correctly, is there anything else on the mpd side I can look at? Thanks > for your help. I just tried MS-CHAPv1 only, but the problem persists: Multi-link PPP for FreeBSD, by Archie L. Cobbs. Based on iij-ppp, by Toshiharu OHNO. mpd: pid 82223, version 3.14 (root@shumai.marcuscom.com 22:45=20 7-Nov-2003) [ciscovpn] ppp node is "mpd82223-ciscov" [ciscovpn] using interface ng0 [ciscovpn] IFACE: Open event [ciscovpn] IPCP: Open event [ciscovpn] IPCP: state change Initial --> Starting [ciscovpn] IPCP: LayerStart Usage: set login [authname] [ciscovpn:vpn] [ciscovpn] bundle: OPEN event in state CLOSED [ciscovpn] opening link "vpn"... [vpn] link: OPEN event [vpn] LCP: Open event [vpn] LCP: state change Initial --> Starting [vpn] LCP: LayerStart [vpn] device: OPEN event in state DOWN pptp0: connecting to 172.18.124.132:1723 [vpn] device is now in state OPENING pptp0: connected to 172.18.124.132:1723 pptp0: attached to connection with 172.18.124.132:1723 pptp0-0: outgoing call connected at 10000000 bps [vpn] PPTP call successful [vpn] device: UP event in state OPENING [vpn] device is now in state UP [vpn] link: UP event [vpn] link: origination is local [vpn] LCP: Up event [vpn] LCP: state change Starting --> Req-Sent [vpn] LCP: phase shift DEAD --> ESTABLISH [vpn] LCP: SendConfigReq #1 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM c264ba4c [vpn] LCP: rec'd Configure Request #0 link 0 (Req-Sent) AUTHPROTO CHAP MSOFTv2 [vpn] LCP: SendConfigNak #0 AUTHPROTO CHAP MSOFT [vpn] LCP: rec'd Configure Request #1 link 0 (Req-Sent) AUTHPROTO CHAP MSOFT [vpn] LCP: SendConfigAck #1 AUTHPROTO CHAP MSOFT [vpn] LCP: state change Req-Sent --> Ack-Sent [vpn] LCP: SendConfigReq #2 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM c264ba4c [vpn] LCP: rec'd Configure Ack #2 link 0 (Ack-Sent) ACFCOMP PROTOCOMP MRU 1500 MAGICNUM c264ba4c [vpn] LCP: state change Ack-Sent --> Opened [vpn] LCP: phase shift ESTABLISH --> AUTHENTICATE [vpn] LCP: auth: peer wants CHAP, I want nothing [vpn] LCP: LayerUp [vpn] CHAP: rec'd CHALLENGE #1 Name: "" Using authname "marcus" [vpn] CHAP: sending RESPONSE [vpn] CHAP: sending RESPONSE [vpn] CHAP: sending RESPONSE [vpn] CHAP: rec'd CHALLENGE #2 Name: "" Using authname "marcus" [vpn] CHAP: sending RESPONSE [vpn] CHAP: rec'd SUCCESS #2 [vpn] LCP: authorization successful [vpn] LCP: phase shift AUTHENTICATE --> NETWORK [ciscovpn] setting interface ng0 MTU to 1460 bytes [ciscovpn] up: 1 link, total bandwidth 64000 bps [ciscovpn] IPCP: Up event [ciscovpn] IPCP: state change Starting --> Req-Sent [ciscovpn] IPCP: SendConfigReq #1 IPADDR 1.1.1.1 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [ciscovpn] CCP: Open event [ciscovpn] CCP: state change Initial --> Starting [ciscovpn] CCP: LayerStart [ciscovpn] CCP: Up event [ciscovpn] CCP: state change Starting --> Req-Sent [ciscovpn] CCP: SendConfigReq #1 [vpn] CCP: Checking wether 40 bits are enabled -> yes [vpn] CCP: Checking wether 56 bits are enabled -> no [vpn] CCP: Checking wether 128 bits are enabled -> yes MPPC 0x01000060: MPPE, 40 bit, 128 bit, stateless [ciscovpn] IPCP: rec'd Configure Request #0 link 0 (Req-Sent) IPADDR 172.18.124.132 172.18.124.132 is OK [ciscovpn] IPCP: SendConfigAck #0 IPADDR 172.18.124.132 [ciscovpn] IPCP: state change Req-Sent --> Ack-Sent [ciscovpn] CCP: rec'd Configure Request #0 link 0 (Req-Sent) MPPC 0x01000060: MPPE, 40 bit, 128 bit, stateless [vpn] CCP: Checking wether 40 bits are acceptable -> yes [vpn] CCP: Checking wether 128 bits are acceptable -> yes [ciscovpn] CCP: SendConfigNak #0 MPPC 0x01000040: MPPE, 128 bit, stateless [ciscovpn] CCP: rec'd Configure Nak #1 link 0 (Req-Sent) MPPC 0x01000040: MPPE, 128 bit, stateless [ciscovpn] CCP: SendConfigReq #2 [vpn] CCP: Checking wether 40 bits are enabled -> no [vpn] CCP: Checking wether 56 bits are enabled -> no [vpn] CCP: Checking wether 128 bits are enabled -> yes MPPC 0x01000040: MPPE, 128 bit, stateless [ciscovpn] CCP: rec'd Configure Request #1 link 0 (Req-Sent) MPPC 0x01000040: MPPE, 128 bit, stateless [vpn] CCP: Checking wether 128 bits are acceptable -> yes [ciscovpn] CCP: SendConfigAck #1 MPPC 0x01000040: MPPE, 128 bit, stateless [ciscovpn] CCP: state change Req-Sent --> Ack-Sent [ciscovpn] CCP: rec'd Configure Ack #2 link 0 (Ack-Sent) MPPC 0x01000040: MPPE, 128 bit, stateless [ciscovpn] CCP: state change Ack-Sent --> Opened [ciscovpn] CCP: LayerUp Compress using: MPPE, 128 bit, stateless Decompress using: MPPE, 128 bit, stateless [ciscovpn] setting interface ng0 MTU to 1456 bytes [ciscovpn] IPCP: SendConfigReq #2 IPADDR 1.1.1.1 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [ciscovpn] IPCP: rec'd Configure Request #1 link 0 (Ack-Sent) IPADDR 172.18.124.132 172.18.124.132 is OK [ciscovpn] IPCP: SendConfigAck #1 IPADDR 172.18.124.132 [ciscovpn] IPCP: SendConfigReq #3 IPADDR 1.1.1.1 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [ciscovpn] IPCP: SendConfigReq #4 IPADDR 1.1.1.1 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [ciscovpn] IPCP: rec'd Configure Request #2 link 0 (Ack-Sent) IPADDR 172.18.124.132 172.18.124.132 is OK [ciscovpn] IPCP: SendConfigAck #2 IPADDR 172.18.124.132 [ciscovpn] IPCP: SendConfigReq #5 IPADDR 1.1.1.1 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [ciscovpn] IPCP: rec'd Configure Request #3 link 0 (Ack-Sent) IPADDR 172.18.124.132 172.18.124.132 is OK [ciscovpn] IPCP: SendConfigAck #3 IPADDR 172.18.124.132 [ciscovpn] IPCP: SendConfigReq #6 IPADDR 1.1.1.1 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [ciscovpn] IPCP: rec'd Configure Reject #6 link 0 (Ack-Sent) COMPPROTO VJCOMP, 16 comp. channels, no comp-cid [ciscovpn] IPCP: SendConfigReq #7 IPADDR 1.1.1.1 [ciscovpn] IPCP: rec'd Configure Ack #7 link 0 (Ack-Sent) IPADDR 1.1.1.1 [ciscovpn] IPCP: state change Ack-Sent --> Opened [ciscovpn] IPCP: LayerUp 1.1.1.1 -> 172.18.124.132 [ciscovpn] IFACE: Up event [ciscovpn] setting interface ng0 MTU to 1456 bytes [ciscovpn] exec: /sbin/ifconfig ng0 1.1.1.1 172.18.124.132 netmask 0xffffffff -link0 [ciscovpn] exec: /sbin/route add 1.1.1.1 -iface lo0 [ciscovpn] IFACE: Up event [vpn] LCP: rec'd Protocol Reject #2 link 0 (Opened) [vpn] LCP: protocol 0x70b4 was rejected [vpn] LCP: rec'd Protocol Reject #3 link 0 (Opened) [vpn] LCP: protocol 0x97b4 was rejected Joe --=20 PGP Key : http://www.marcuscom.com/pgp.asc --=-LhDKq28Sd9nsMh4xrb5l Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQA/rtrRb2iPiv4Uz4cRAsFoAJ9/Q08nAVB9ovjyAeh/Ndd+AbRXRQCgo0HX yt/xGqmpX1LE/MUDpnKVim4= =P8Di -----END PGP SIGNATURE----- --=-LhDKq28Sd9nsMh4xrb5l-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:33:42 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8B3FE16A4CE; Sun, 9 Nov 2003 16:33:42 -0800 (PST) Received: from ms-smtp-01-eri0.southeast.rr.com (ms-smtp-01-lbl.southeast.rr.com [24.25.9.100]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3F8DD43FB1; Sun, 9 Nov 2003 16:33:40 -0800 (PST) (envelope-from jason@ec.rr.com) Received: from ec.rr.com (cpe-024-211-231-149.ec.rr.com [24.211.231.149]) hAA0Xbgd010999; Sun, 9 Nov 2003 19:33:38 -0500 (EST) Message-ID: <3FAEDCB9.3050101@ec.rr.com> Date: Sun, 09 Nov 2003 19:32:57 -0500 From: Jason User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031205 Thunderbird/0.3 X-Accept-Language: en-us, en MIME-Version: 1.0 References: <000001c3a716$c82f5490$6501a8c0@Nomad> <200311091528.04907.kstewart@owt.com> In-Reply-To: <200311091528.04907.kstewart@owt.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine cc: freebsd-current@freebsd.org cc: freebsd-questions@freebsd.org Subject: Re: buildworld error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:33:42 -0000 Ok, here is the last section of output and the error. After this if I do ethier gzip command I get an error, but if I enter the makeinfo commands first the gzip command then works. Could this be some kind of schedualling problem because I normally use the command $time make -j4 buildworld. But it always stops at this point, so it must be something specific to the cvs/doc files. I have emailed the maintiner listed in the make files and have gotten no response. Anyone else have this experience? Thanks, Jason ===> gnu/usr.bin/cvs/doc makeinfo --no-split -I /usr/src/gnu/usr.bin/cvs/doc -I /usr/src/gnu/usr.bin/cvs/doc/../../../../contrib/cvs/doc /usr/src/gnu/usr.bin/cvs/doc/../../../../contrib/cvs/doc/cvs.texinfo -o cvs.info makeinfo --no-split -I /usr/src/gnu/usr.bin/cvs/doc -I /usr/src/gnu/usr.bin/cvs/doc/../../../../contrib/cvs/doc /usr/src/gnu/usr.bin/cvs/doc/../../../../contrib/cvs/doc/cvsclient.texi -o cvsclient.info gzip -cn cvsclient.info > cvsclient.info.gz gzip -cn cvs.info > cvs.info.gz 1 error *** Error code 2 1 error *** Error code 2 1 error From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:35:33 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CBF6F16A4CF for ; Sun, 9 Nov 2003 16:35:33 -0800 (PST) Received: from ms-smtp-01-eri0.southeast.rr.com (ms-smtp-01-lbl.southeast.rr.com [24.25.9.100]) by mx1.FreeBSD.org (Postfix) with ESMTP id 45A7F43FD7 for ; Sun, 9 Nov 2003 16:35:32 -0800 (PST) (envelope-from jason@ec.rr.com) Received: from ec.rr.com (cpe-024-211-231-149.ec.rr.com [24.211.231.149]) hAA0ZTgd013592; Sun, 9 Nov 2003 19:35:30 -0500 (EST) Message-ID: <3FAEDD29.4020903@ec.rr.com> Date: Sun, 09 Nov 2003 19:34:49 -0500 From: Jason User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031205 Thunderbird/0.3 X-Accept-Language: en-us, en MIME-Version: 1.0 To: asolomon15 References: <1068419928.587.30.camel@nyshell.solomon.net> In-Reply-To: <1068419928.587.30.camel@nyshell.solomon.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine cc: freebsd questions Subject: Re: can't build openoffice1.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:35:33 -0000 asolomon15 wrote: >There seems to be a problem when I try to build openoffice 1.1 under >freebsd 5.1 release. Here is the error that I get > >/usr/ports/editors/openoffice-1.1/work/oo_1.1_src/ridljar/com/sun/star/io >dmake: Error code 132, while making 'Shell escape' > >ERROR: Error 65280 occurred while making >/usr/ports/editors/openoffice-1.1/work/oo_1.1_src/ridljar/com/sun/star/io >dmake: Error code 1, while making 'build_all' >---* TG_SLO.MK *--- >*** Error code 255 > > >Thanks if anyone can help > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > What command are you using to build it, what is in your /etc/make.conf, and have you updated your ports lately? From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:42:09 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C8E9016A4CE for ; Sun, 9 Nov 2003 16:42:09 -0800 (PST) Received: from mail019.syd.optusnet.com.au (mail019.syd.optusnet.com.au [211.29.132.73]) by mx1.FreeBSD.org (Postfix) with ESMTP id 094A643FAF for ; Sun, 9 Nov 2003 16:42:08 -0800 (PST) (envelope-from freebsd.org@carmoda.com) Received: from carmoda.com (c210-49-147-182.kelvn1.qld.optusnet.com.au [210.49.147.182])hAA0g0F25278 for ; Mon, 10 Nov 2003 11:42:01 +1100 Message-ID: <3FAEE02E.5040002@carmoda.com> Date: Mon, 10 Nov 2003 10:47:42 +1000 From: carmoda User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.4b) Gecko/20030525 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: recovering data X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:42:10 -0000 Hi, I would like to know if there is a proceedure i might be able to follow to recover a file that was deleted on a FreeBSD fileserver with SAMBA from a Windows 2000 workstation.. i know the file's name and i have powered down the server. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:45:51 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4459516A4CE for ; Sun, 9 Nov 2003 16:45:51 -0800 (PST) Received: from ms-smtp-01-eri0.southeast.rr.com (ms-smtp-01-lbl.southeast.rr.com [24.25.9.100]) by mx1.FreeBSD.org (Postfix) with ESMTP id 592E043FDF for ; Sun, 9 Nov 2003 16:45:50 -0800 (PST) (envelope-from jason@ec.rr.com) Received: from ec.rr.com (cpe-024-211-231-149.ec.rr.com [24.211.231.149]) hAA0jkgd025019; Sun, 9 Nov 2003 19:45:47 -0500 (EST) Message-ID: <3FAEDF92.5040907@ec.rr.com> Date: Sun, 09 Nov 2003 19:45:06 -0500 From: Jason User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031205 Thunderbird/0.3 X-Accept-Language: en-us, en MIME-Version: 1.0 To: sham khalil References: <20031110075104.R556@shmbsd5.kopiesatu.com> In-Reply-To: <20031110075104.R556@shmbsd5.kopiesatu.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine cc: freebsd-questions@freebsd.org Subject: Re: Openoffice install error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:45:51 -0000 sham khalil wrote: >i want to install openoffice on my FreeBSD-4.9-RELEASE >my /usr is only 3.1G, it said I need 4G >so i put my /usr/ports into /home which i have plenty of space >/usr/ports -> /home/ports > >i can't install openoffice with both command, make install and >portinstall. > >error message is in the attachment > >thanks you. >sham khalil > > > >install comand: make install clean >================================== > >../../../dist/include/docshell/nsIDocShell.h:750: virtual outside class > declaration >../../../dist/include/docshell/nsIDocShell.h:750: function `nsresult > SetScheme(const nsAString&)' is initialized like a variable >../../../dist/include/docshell/nsIDocShell.h:752: syntax error before `}' token >../../../dist/include/docshell/nsIDocShell.h:784:11: warning: no newline at end >of file >../../../dist/include/docshell/nsIDocShell.h:711:1: unterminated #ifndef >nsObserverBase.cpp: In member function `virtual nsresult > nsObserverBase::NotifyWebShell(nsISupports*, nsISupports*, const char*, > int)': >nsObserverBase.cpp:76: `nsIDocShell' undeclared (first use this function) >nsObserverBase.cpp:76: (Each undeclared identifier is reported only once for > each function it appears in.) >nsObserverBase.cpp:76: template argument 1 is invalid >nsObserverBase.cpp:76: ISO C++ forbids declaration of `docshell' with no type >nsObserverBase.cpp:76: cannot convert `const nsQueryInterface' to `int' in > initialization > > This says in the file nsObserverBase.cpp there is a typo or syntax error at lines 76 and 79. I have seen the same type error from using -O2 or higher on gcc. Try -O when you compile it, check the file for errors if you are good at programing, or download the src again. >nsObserverBase.cpp:79: invalid conversion from `int' to `nsISupports*' >nsObserverBase.cpp:79: initializing argument 1 of `const nsQueryInterface > do_QueryInterface(nsISupports*, nsresult*)' >{standard input}: Assembler messages: >{standard input}:13: Error: symbol `GetForm' is already defined > > From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:50:00 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2970316A4CE for ; Sun, 9 Nov 2003 16:50:00 -0800 (PST) Received: from smtp01.wxs.nl (smtp01.wxs.nl [195.121.6.61]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1453A43FE0 for ; Sun, 9 Nov 2003 16:49:59 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp01.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO400DEJ2B9FD@smtp01.wxs.nl> for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 01:49:58 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAA0o2eZ054211; Mon, 10 Nov 2003 01:50:02 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAA0o0DR054196; Mon, 10 Nov 2003 01:50:00 +0100 (CET envelope-from akruijff) Date: Mon, 10 Nov 2003 01:49:59 +0100 From: Alex de Kruijff In-reply-to: <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> To: Matthew Seaman , Andrew , freebsd-questions@freebsd.org Message-id: <20031110004959.GD553@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:50:00 -0000 On Sun, Nov 09, 2003 at 04:32:24PM +0000, Matthew Seaman wrote: > On Mon, Nov 10, 2003 at 01:17:20AM +1030, Andrew wrote: > > > I have been trying to get FreeBSD 5.2 installed but i am unable to find > > all the packages that are required on the official cd-rom set i brought. > > i have tryed installing by FTP and i am still unable to find them > > This gouies for instant-workstation > > Hmmm... It seems you've gone astray in time. FreeBSD 5.2 has yet to > be released. See > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/schedule.html > > Perhaps you mean 5.1 ? > > You won't find all possible packages on the CD Rom set as there's > simply far too much stuff to fit onto the CDs. Instant-workstation is a wraparound for a couple of high used ports on a workstation. All the packages of all the ports its points to should be on the CDrom. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:53:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0146E16A4CF for ; Sun, 9 Nov 2003 16:53:19 -0800 (PST) Received: from mail.devrandom.org.uk (82-68-135-38.dsl.in-addr.zen.co.uk [82.68.135.38]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2BD6943FE3 for ; Sun, 9 Nov 2003 16:53:15 -0800 (PST) (envelope-from howells@kde.org) Received: from localhost.invalid (0-c-6e-e5-27-1.middleearth [192.168.1.194]) by mail.devrandom.org.uk (Postfix) with ESMTP id 4BD01133AD for ; Mon, 10 Nov 2003 00:53:13 +0000 (GMT) From: Chris Howells Organization: K Desktop Environment To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 00:52:49 +0000 User-Agent: KMail/1.5.93 References: <20031110075104.R556@shmbsd5.kopiesatu.com> <3FAEDF92.5040907@ec.rr.com> In-Reply-To: <3FAEDF92.5040907@ec.rr.com> X-GPG-Fingerprint: 5863 DF82 C34D 7291 CC63 CA1B 17C2 2ED7 3379 5A2C MIME-Version: 1.0 Content-Disposition: inline Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Message-Id: <200311100053.06919.howells@kde.org> Subject: Re: Openoffice install error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:53:19 -0000 =2D----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, On Monday 10 November 2003 00:45, Jason wrote: > at lines 76 and 79. =A0I have seen the same type error from using -O2 or > higher on gcc. =A0Try -O when you compile it, check the file for errors if > you are good at programing, or download the src again. The -On options modifies how much optimisation gcc should use, e.g. at too= =20 high level gcc might _output_ broken binaries. It shouldn't affect gcc's=20 abilities to parse and compile code, just that the resulting compiled code= =20 might not work properly. Unless something is completely broken, that is... =2D --=20 Cheers, Chris Howells -- chris@chrishowells.co.uk, howells@kde.org Web: http://chrishowells.co.uk, PGP ID: 0x33795A2C KDE/Qt/C++/PHP Developer: http://www.kde.org =2D----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/ruFyF8Iu1zN5WiwRAkIuAJ9CeysQdehl343l8T9oyFyAuQsZ3QCfRAzC VyPxY4WMzJAlujsRT7hCMNI=3D =3DttFH =2D----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:56:21 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1ABD816A4CE for ; Sun, 9 Nov 2003 16:56:21 -0800 (PST) Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4004043F85 for ; Sun, 9 Nov 2003 16:56:20 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp05.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO400HCL2LULQ@smtp05.wxs.nl> for freebsd-questions@FreeBSD.ORG; Mon, 10 Nov 2003 01:56:19 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAA0uNeZ054258; Mon, 10 Nov 2003 01:56:23 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAA0uNRS054257; Mon, 10 Nov 2003 01:56:23 +0100 (CET envelope-from akruijff) Date: Mon, 10 Nov 2003 01:56:23 +0100 From: Alex de Kruijff In-reply-to: <20031108224501.GA55641@tao.thought.org> To: Gary Kline Message-id: <20031110005623.GE553@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <20031108224501.GA55641@tao.thought.org> cc: FreeBSD Mailing List Subject: Re: ok, i give up; how acroread in mozilla??? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:56:21 -0000 On Sat, Nov 08, 2003 at 02:45:01PM -0800, Gary Kline wrote: > > People, > > Setting up netscape to use realplayer and acroread took > awhile but I finally got it. I've been using mozilla > more and more, but still haven't figured out howto get > it to successfully spawn acroread. The online FreeBSD handbook has a chapter about brouwsers. I think it also contains how to do this. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 16:57:41 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9730816A4CE for ; Sun, 9 Nov 2003 16:57:41 -0800 (PST) Received: from m00.ca.astound.net (m00.ca.astound.net [64.85.239.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id A879943F75 for ; Sun, 9 Nov 2003 16:57:40 -0800 (PST) (envelope-from rchopra@cal.berkeley.edu) Received: from cal.berkeley.edu (astound-66-234-212-148.ca.astound.net [66.234.212.148]) by m00.ca.astound.net (8.12.10/8.12.10) with ESMTP id hAA0vSq8002866 for ; Sun, 9 Nov 2003 16:57:29 -0800 Message-ID: <3FAEE218.5080402@cal.berkeley.edu> Date: Sun, 09 Nov 2003 16:55:52 -0800 From: Rishi Chopra User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.5b) Gecko/20030901 Thunderbird/0.2 X-Accept-Language: en-us, en MIME-Version: 1.0 To: questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: by amavisd-new Subject: Installing Without Video Card X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 00:57:41 -0000 Is there a way to install FreeBSD without a video card? Can I somehow install the OS over ethernet without having a video card and monitor hooked up? Please email me at rchopra@cal.berkeley.edu if you can think of a way... From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:06:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8C00216A4CE; Sun, 9 Nov 2003 17:06:45 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6AEF543FCB; Sun, 9 Nov 2003 17:06:44 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id BFB0C66B28; Sun, 9 Nov 2003 17:06:43 -0800 (PST) Date: Sun, 9 Nov 2003 17:06:43 -0800 From: Kris Kennaway To: Jason Message-ID: <20031110010643.GA3060@xor.obsecurity.org> References: <000001c3a716$c82f5490$6501a8c0@Nomad> <200311091528.04907.kstewart@owt.com> <3FAEDCB9.3050101@ec.rr.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="UlVJffcvxoiEqYs2" Content-Disposition: inline In-Reply-To: <3FAEDCB9.3050101@ec.rr.com> User-Agent: Mutt/1.4.1i cc: freebsd-current@freebsd.org cc: freebsd-questions@freebsd.org Subject: Re: buildworld error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:06:45 -0000 --UlVJffcvxoiEqYs2 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 09, 2003 at 07:32:57PM -0500, Jason wrote: > Ok, here is the last section of output and the error. After this if I=20 > do ethier gzip command I get an error, but if I enter the makeinfo=20 > commands first the gzip command then works. Could this be some kind of= =20 > schedualling problem because I normally use the command $time make -j4= =20 > buildworld. But it always stops at this point, so it must be something= =20 > specific to the cvs/doc files. I have emailed the maintiner listed in=20 > the make files and have gotten no response. Anyone else have this=20 > experience? > Thanks, > Jason Don't use -j when posting buildworld errors, because they are obscured amongst other output. Please retry without -j and post the actual error. Kris --UlVJffcvxoiEqYs2 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/ruSjWry0BWjoQKURAn1bAJ4x2emu1Gok2VIn4FTjd+ce0iZAjQCg9Nh0 5pFKJQIDLpSHaHVwHnHszfs= =eHMT -----END PGP SIGNATURE----- --UlVJffcvxoiEqYs2-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:07:23 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7571316A4CE for ; Sun, 9 Nov 2003 17:07:23 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9EF1F43FE1 for ; Sun, 9 Nov 2003 17:07:22 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id CDBB966B28; Sun, 9 Nov 2003 17:07:21 -0800 (PST) Date: Sun, 9 Nov 2003 17:07:21 -0800 From: Kris Kennaway To: Alex de Kruijff Message-ID: <20031110010721.GB3060@xor.obsecurity.org> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <20031110004959.GD553@dds.nl> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="KFztAG8eRSV9hGtP" Content-Disposition: inline In-Reply-To: <20031110004959.GD553@dds.nl> User-Agent: Mutt/1.4.1i cc: Andrew cc: freebsd-questions@freebsd.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:07:23 -0000 --KFztAG8eRSV9hGtP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 01:49:59AM +0100, Alex de Kruijff wrote: > On Sun, Nov 09, 2003 at 04:32:24PM +0000, Matthew Seaman wrote: > > On Mon, Nov 10, 2003 at 01:17:20AM +1030, Andrew wrote: > >=20 > > > I have been trying to get FreeBSD 5.2 installed but i am unable to fi= nd=20 > > > all the packages that are required on the official cd-rom set i broug= ht. > > > i have tryed installing by FTP and i am still unable to find them > > > This gouies for instant-workstation > >=20 > > Hmmm... It seems you've gone astray in time. FreeBSD 5.2 has yet to > > be released. See > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/schedule.= html > >=20 > > Perhaps you mean 5.1 ? > >=20 > > You won't find all possible packages on the CD Rom set as there's > > simply far too much stuff to fit onto the CDs. >=20 > Instant-workstation is a wraparound for a couple of high used ports on a > workstation. All the packages of all the ports its points to should be > on the CDrom. Not that I could see.. Kris --KFztAG8eRSV9hGtP Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/ruTJWry0BWjoQKURAq6JAKCrKedVieQHCIkioWw4D7amHdK7dwCgzftR MdaF+U20Fc29CnJ+A6xm6d4= =BSnT -----END PGP SIGNATURE----- --KFztAG8eRSV9hGtP-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:08:47 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 78F4116A4CE for ; Sun, 9 Nov 2003 17:08:47 -0800 (PST) Received: from mailout.informatik.tu-muenchen.de (mailout.informatik.tu-muenchen.de [131.159.0.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8633543FB1 for ; Sun, 9 Nov 2003 17:08:46 -0800 (PST) (envelope-from barner@in.tum.de) Received: by zi025.glhnet.mhn.de (Postfix, from userid 1000) id E4FE35B4; Mon, 10 Nov 2003 02:08:42 +0100 (CET) Date: Mon, 10 Nov 2003 02:08:42 +0100 From: Simon Barner To: fallenbr Message-ID: <20031110010842.GA3450@zi025.glhnet.mhn.de> References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="vkogqOf2sHV7VnPd" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.4i X-Virus-Scanned: by amavisd-new at informatik.tu-muenchen.de cc: freebsd-questions@freebsd.org Subject: Re: Old Computer + New HD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:08:47 -0000 X-List-Received-Date: Mon, 10 Nov 2003 01:08:47 -0000 --vkogqOf2sHV7VnPd Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable > I need to use an 80GB hard disk on my > old computer, which can only detect > HDs smaller than 8GB. >=20 > Does anyone have any advice? I can confirm what Erik wrote: I got a shiny new 120G hard disk the other day. The only way to make it work was not to enable it in the BIOS and let FreeBSD do the rest. You will certainly need a hard drive that is compatible with your BIOS for your root partition. If you more specific information, then you should post which motherboard, chipset, BIOS you have and which hard disk you intend to use. You should also check the hardware notes: http://www.freebsd.org/releases/4.9R/hardware-i386.html http://www.freebsd.org/releases/5.1R/hardware-i386.html Simon --vkogqOf2sHV7VnPd Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/ruUaCkn+/eutqCoRAkzJAKDKJcTsipDFestlrsUz9++tgpYymwCg71km C53noX4zBOqetAg93XY7ot8= =cvZg -----END PGP SIGNATURE----- --vkogqOf2sHV7VnPd-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:09:43 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 399B916A4CE for ; Sun, 9 Nov 2003 17:09:43 -0800 (PST) Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.54]) by mx1.FreeBSD.org (Postfix) with ESMTP id 563BB43FA3 for ; Sun, 9 Nov 2003 17:09:42 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186])18questions@freebsd.org; Mon, 10 Nov 2003 02:14:54 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAA19keZ054364; Mon, 10 Nov 2003 02:09:46 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAA19jA4054363; Mon, 10 Nov 2003 02:09:45 +0100 (CET envelope-from akruijff) Date: Mon, 10 Nov 2003 02:09:45 +0100 From: Alex de Kruijff To: questions@freebsd.org Message-id: <20031110010945.GG553@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i cc: james Subject: [freebsd@akruijff.dds.nl: Re: how to modem] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:09:43 -0000 Dear James, I've overlooked that you didn't cc questions@freebsd.org. Because if this I forwared my reply to you and the list. I have two reasons for this. 1) Others could also help you. They may need the information you have provided. 2) Other could also learn from this. Alex ----- Forwarded message from Alex de Kruijff ----- Date: Mon, 10 Nov 2003 02:05:22 +0100 From: Alex de Kruijff To: james Subject: Re: how to modem In-Reply-To: <3FAE2D98.6050102@quik.com> User-Agent: Mutt/1.4.1i On Sun, Nov 09, 2003 at 04:05:44AM -0800, james wrote: > Alex de Kruijff wrote: > > >On Sat, Nov 08, 2003 at 03:41:47AM -0800, james wrote: > > > > > >>I can't find the modem . although I did finally get kde installed > >>are there any simple instructions for finding your modem and > >>hitching up to the internet > >> > >> > > > >What type of modum do you have? (i.e. external/internal, > >plug-n-play/jumpers) > > > >Did you see it in the output of 'dmesg'? > > > im not sure of the name but it is an old internal jumper style with the > tiny switches instead of the pull off style of jumpers > thkns ill try dmesg well I took it out and looked at it it is set to > com 4 and its a rockwell an old one the dmesg didn't seem to know what > it was will try to give more info i am useing a aptiva with 32 megs ram > and the vedio card has 2 mb mem what else there is an maxetor 1 gig hd (Is it ISA or PCI?) I bleave, from what i have read, that you don't requere the port you installed. Leave it for now. What have you done to get it working? (Read documentation, commands entered) You wanna read this: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/userppp.html -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ ----- End forwarded message ----- -- Alex My homepage (dutch) - http://www.kruijff.org/alex/ From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:12:55 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CED6116A4CE for ; Sun, 9 Nov 2003 17:12:55 -0800 (PST) Received: from smtp10.wxs.nl (smtp10.wxs.nl [195.121.6.35]) by mx1.FreeBSD.org (Postfix) with ESMTP id CE8E043FEA for ; Sun, 9 Nov 2003 17:12:54 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp10.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO400FZN3A0DG@smtp10.wxs.nl> for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 02:10:49 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAA1CweZ054419; Mon, 10 Nov 2003 02:12:59 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAA1Cvm3054418; Mon, 10 Nov 2003 02:12:57 +0100 (CET envelope-from akruijff) Date: Mon, 10 Nov 2003 02:12:56 +0100 From: Alex de Kruijff In-reply-to: <20031110010721.GB3060@xor.obsecurity.org> To: Kris Kennaway Message-id: <20031110011256.GH553@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <20031110004959.GD553@dds.nl> <20031110010721.GB3060@xor.obsecurity.org> cc: Andrew cc: freebsd-questions@freebsd.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:12:55 -0000 On Sun, Nov 09, 2003 at 05:07:21PM -0800, Kris Kennaway wrote: > On Mon, Nov 10, 2003 at 01:49:59AM +0100, Alex de Kruijff wrote: > > On Sun, Nov 09, 2003 at 04:32:24PM +0000, Matthew Seaman wrote: > > > On Mon, Nov 10, 2003 at 01:17:20AM +1030, Andrew wrote: > > > > > > > I have been trying to get FreeBSD 5.2 installed but i am unable to find > > > > all the packages that are required on the official cd-rom set i brought. > > > > i have tryed installing by FTP and i am still unable to find them > > > > This gouies for instant-workstation > > > > > > Hmmm... It seems you've gone astray in time. FreeBSD 5.2 has yet to > > > be released. See > > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/schedule.html > > > > > > Perhaps you mean 5.1 ? > > > > > > You won't find all possible packages on the CD Rom set as there's > > > simply far too much stuff to fit onto the CDs. > > > > Instant-workstation is a wraparound for a couple of high used ports on a > > workstation. All the packages of all the ports its points to should be > > on the CDrom. > > Not that I could see.. I didn't very this manualy so I could be wrong. It would be a bit unlogicaly to not include packages that are refered to as bing a instant workstation, since a lot of ppl would get the idee to install it. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:17:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 52C2216A4CE for ; Sun, 9 Nov 2003 17:17:19 -0800 (PST) Received: from mailout.informatik.tu-muenchen.de (mailout.informatik.tu-muenchen.de [131.159.0.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 97ED343FE5 for ; Sun, 9 Nov 2003 17:17:18 -0800 (PST) (envelope-from barner@in.tum.de) Received: by zi025.glhnet.mhn.de (Postfix, from userid 1000) id 0E4585E0; Mon, 10 Nov 2003 02:15:22 +0100 (CET) Date: Mon, 10 Nov 2003 02:15:21 +0100 From: Simon Barner To: Bill-Peggy Message-ID: <20031110011521.GB3450@zi025.glhnet.mhn.de> References: <002101c3a6f9$d6526f20$c6b65318@vf.shawcable.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="lEGEL1/lMxI0MVQ2" Content-Disposition: inline In-Reply-To: <002101c3a6f9$d6526f20$c6b65318@vf.shawcable.net> User-Agent: Mutt/1.5.4i X-Virus-Scanned: by amavisd-new at informatik.tu-muenchen.de cc: freebsd-questions@FreeBSD.ORG Subject: Re: ATI help X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:17:19 -0000 --lEGEL1/lMxI0MVQ2 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable > i have just installed freebsd and am running an ati all-in-wonder 7500 > card and cannot load the gui=20 >=20 > i would be extremly grateful to anyone who can help -v, please :-) - Which version of XFree are you using? - How do you try to start XFree? How did you configure it? - Do you have any error messages? ( If you /var/log/XFree86.0.log, post that, please. Otherwise, do the following: # script /tmp/xfree.log # startx # exit The relevant error messages will be in that log file then. It would be helpfull, too, if you attach your /etc/X11/XF86Config file. Simon --lEGEL1/lMxI0MVQ2 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/ruapCkn+/eutqCoRAtw6AKDvX/Dkl8e3TemhGfFYGQwX76h1kwCfUsJQ av1fNF08id4gftotes+ClMA= =PJ0i -----END PGP SIGNATURE----- --lEGEL1/lMxI0MVQ2-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:17:27 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 37DD116A4CE for ; Sun, 9 Nov 2003 17:17:27 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 464B343F85 for ; Sun, 9 Nov 2003 17:17:26 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 985D966B28; Sun, 9 Nov 2003 17:17:22 -0800 (PST) Date: Sun, 9 Nov 2003 17:17:22 -0800 From: Kris Kennaway To: Alex de Kruijff Message-ID: <20031110011722.GA3207@xor.obsecurity.org> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <20031110004959.GD553@dds.nl> <20031110010721.GB3060@xor.obsecurity.org> <20031110011256.GH553@dds.nl> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="BOKacYhQ+x31HxR3" Content-Disposition: inline In-Reply-To: <20031110011256.GH553@dds.nl> User-Agent: Mutt/1.4.1i cc: Andrew cc: freebsd-questions@FreeBSD.org cc: Kris Kennaway Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:17:27 -0000 --BOKacYhQ+x31HxR3 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 02:12:56AM +0100, Alex de Kruijff wrote: > On Sun, Nov 09, 2003 at 05:07:21PM -0800, Kris Kennaway wrote: > > On Mon, Nov 10, 2003 at 01:49:59AM +0100, Alex de Kruijff wrote: > > > On Sun, Nov 09, 2003 at 04:32:24PM +0000, Matthew Seaman wrote: > > > > On Mon, Nov 10, 2003 at 01:17:20AM +1030, Andrew wrote: > > > >=20 > > > > > I have been trying to get FreeBSD 5.2 installed but i am unable t= o find=20 > > > > > all the packages that are required on the official cd-rom set i b= rought. > > > > > i have tryed installing by FTP and i am still unable to find them > > > > > This gouies for instant-workstation > > > >=20 > > > > Hmmm... It seems you've gone astray in time. FreeBSD 5.2 has yet to > > > > be released. See > > > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/sched= ule.html > > > >=20 > > > > Perhaps you mean 5.1 ? > > > >=20 > > > > You won't find all possible packages on the CD Rom set as there's > > > > simply far too much stuff to fit onto the CDs. > > >=20 > > > Instant-workstation is a wraparound for a couple of high used ports o= n a > > > workstation. All the packages of all the ports its points to should be > > > on the CDrom. > >=20 > > Not that I could see.. >=20 > I didn't very this manualy so I could be wrong. It would be a bit > unlogicaly to not include packages that are refered to as bing a > instant workstation, since a lot of ppl would get the idee to install > it. instant-workstation is not included on cd#1. As stated, there isn't enough space for everything. Kris --BOKacYhQ+x31HxR3 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/ruciWry0BWjoQKURAvHYAJ9dzL3Cfo3lCOE0Yip19e0Hk3WWmwCgxUnf ISYjW6WR9T77eQH9mM18Ok0= =ODsn -----END PGP SIGNATURE----- --BOKacYhQ+x31HxR3-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:20:20 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 14BE416A4CE for ; Sun, 9 Nov 2003 17:20:20 -0800 (PST) Received: from imf16aec.mail.bellsouth.net (imf16aec.mail.bellsouth.net [205.152.59.64]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0CE1B43FDD for ; Sun, 9 Nov 2003 17:20:19 -0800 (PST) (envelope-from b_cassidy@bellsouth.net) Received: from bellsouth.net ([68.214.85.125]) by imf16aec.mail.bellsouth.netSMTP <20031110012018.MMOW20018.imf16aec.mail.bellsouth.net@bellsouth.net> for ; Sun, 9 Nov 2003 20:20:18 -0500 Date: Sun, 9 Nov 2003 20:24:44 -0600 From: Bryan Cassidy To: freebsd-questions@freebsd.org Message-Id: <20031109202444.7b9fea11.b_cassidy@bellsouth.net> X-Mailer: Sylpheed version 0.9.7 (GTK+ 1.2.10; i386-portbld-freebsd4.8) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: DVD + weird log messages X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:20:20 -0000 I get these in my log (messages) when I play DVDs. The movie plays fine, without any problem what so ever. Nov 9 20:16:46 bellsouth /kernel: acd0: READ_DVD_STRUCTURE - ILLEGAL REQUEST asc=0x30 ascq=0x02 error=0x04 Nov 9 20:17:17 bellsouth /kernel: acd0: READ_DVD_STRUCTURE - ILLEGAL REQUEST asc=0x30 ascq=0x02 error=0x04 Nov 9 20:18:07 bellsouth /kernel: acd0: READ_DVD_STRUCTURE - ILLEGAL REQUEST asc=0x30 ascq=0x02 error=0x04 Nov 9 20:20:30 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST asc=0x6f ascq=0x04 error=0x04 Nov 9 20:20:30 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0x04 Nov 9 20:20:56 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST asc=0x6f ascq=0x04 error=0x04 Nov 9 20:20:56 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0x04 Nov 9 20:22:56 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST asc=0x6f ascq=0x04 error=0x04 Nov 9 20:22:56 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0x04 From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:28:58 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 494B616A4CE for ; Sun, 9 Nov 2003 17:28:58 -0800 (PST) Received: from ozlabs.org (ozlabs.org [203.10.76.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3606343FE1 for ; Sun, 9 Nov 2003 17:28:57 -0800 (PST) (envelope-from grog@lemis.com) Received: from blackwater.lemis.com (blackwater.lemis.com [192.109.197.80]) by ozlabs.org (Postfix) with ESMTP id 08F3B2BD34 for ; Mon, 10 Nov 2003 12:28:55 +1100 (EST) Received: by blackwater.lemis.com (Postfix, from userid 1004) id 0E8C5511FA; Mon, 10 Nov 2003 11:58:53 +1030 (CST) Date: Mon, 10 Nov 2003 11:58:53 +1030 From: Greg 'groggy' Lehey To: Andrew Message-ID: <20031110012853.GK77527@wantadilla.lemis.com> References: <3FAE5378.1030209@iweb.net.au> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="GlnCQLZWzqLRJED8" Content-Disposition: inline In-Reply-To: <3FAE5378.1030209@iweb.net.au> User-Agent: Mutt/1.4.1i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 cc: freebsd-questions@FreeBSD.ORG Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:28:58 -0000 X-List-Received-Date: Mon, 10 Nov 2003 01:28:58 -0000 --GlnCQLZWzqLRJED8 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Monday, 10 November 2003 at 1:17:20 +1030, Andrew wrote: > Hi, > > I have been trying to get FreeBSD 5.2 installed but i am unable to find > all the packages that are required on the official cd-rom set i brought. > i have tryed installing by FTP and i am still unable to find them > This gouies for instant-workstation > > I have been following throught book "Greg Lehey The Complete FreeBSD" > can sombody help clear this up for me Well, you could start at the top of page 94: It's possible that the CD set you get will not include instant-workstation. That's not such a problem: you just install the individual ports from this list. You can also do this if you don't like the list of ports. It's difficult to coordinate the production of a book (every year or two, by one publisher) with the distributions (every 4 months, by a different group of people). That's your problem here. To install instant-workstation directly, connect to the Net and enter: # cd /usr/ports/misc/instant-workstation # make install Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. --GlnCQLZWzqLRJED8 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (FreeBSD) iD8DBQE/runVIubykFB6QiMRAne2AJ9TQ/tyLdljzvlVCBTCTWwOpaKN5gCfSueS s9JKdkK4p2cJF9ffYqOY/FI= =6Sm0 -----END PGP SIGNATURE----- --GlnCQLZWzqLRJED8-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:30:08 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ED13C16A4CF for ; Sun, 9 Nov 2003 17:30:08 -0800 (PST) Received: from ozlabs.org (ozlabs.org [203.10.76.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id F420243FDD for ; Sun, 9 Nov 2003 17:29:55 -0800 (PST) (envelope-from grog@lemis.com) Received: from blackwater.lemis.com (blackwater.lemis.com [192.109.197.80]) by ozlabs.org (Postfix) with ESMTP id 2D68B2BD34 for ; Mon, 10 Nov 2003 12:29:54 +1100 (EST) Received: by blackwater.lemis.com (Postfix, from userid 1004) id 365DB511FA; Mon, 10 Nov 2003 11:59:52 +1030 (CST) Date: Mon, 10 Nov 2003 11:59:52 +1030 From: Greg 'groggy' Lehey To: Andrew Message-ID: <20031110012952.GL77527@wantadilla.lemis.com> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <3FAEBD2B.2050404@iweb.net.au> <20031109223435.GA595@xor.obsecurity.org> <3FAECD0E.9020906@iweb.net.au> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="2feizKym29CxAecD" Content-Disposition: inline In-Reply-To: <3FAECD0E.9020906@iweb.net.au> User-Agent: Mutt/1.4.1i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 cc: freebsd-questions@freebsd.org cc: Kris Kennaway Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:30:09 -0000 --2feizKym29CxAecD Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Monday, 10 November 2003 at 9:56:06 +1030, Andrew wrote: > Kris Kennaway wrote: > >> On Mon, Nov 10, 2003 at 08:48:19AM +1030, Andrew wrote: >> >>> Sorry your correct it is version 5.1 >> >> >> 1) Please don't top-post..see how this message has lost context from >> your original posting? >> >> 2) Which packages can't you find, and where precisely are you looking? > > I have been following the the examples in the book > The Complete FreeBSD > Greg Lehey > there is no cdrecord, galeon, gpg, postfix, xtset, > then i carry on reading it said if you installed instant-workstation off > which i can not find either. > I have tryed the install with out these packages but then I can not > copy over file > /usr/share/ske1/dot.bashrc I suppose you mean /usr/share/skel/dot.bashrc. That's part of the instant-workstation port. See my previous reply. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. --2feizKym29CxAecD Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (FreeBSD) iD8DBQE/ruoQIubykFB6QiMRAoE1AJ4qIsslThwxkvRzOJ05OkdCLliiaACgopIz 9aKLy3nVb722CgMrfYqBcnA= =P+vn -----END PGP SIGNATURE----- --2feizKym29CxAecD-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:35:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 233DE16A4CE; Sun, 9 Nov 2003 17:35:45 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1D50743F85; Sun, 9 Nov 2003 17:35:44 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 44D7866B28; Sun, 9 Nov 2003 17:35:43 -0800 (PST) Date: Sun, 9 Nov 2003 17:35:43 -0800 From: Kris Kennaway To: Greg 'groggy' Lehey Message-ID: <20031110013543.GA3450@xor.obsecurity.org> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <3FAEBD2B.2050404@iweb.net.au> <20031109223435.GA595@xor.obsecurity.org> <3FAECD0E.9020906@iweb.net.au> <20031110012952.GL77527@wantadilla.lemis.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="mYCpIKhGyMATD0i+" Content-Disposition: inline In-Reply-To: <20031110012952.GL77527@wantadilla.lemis.com> User-Agent: Mutt/1.4.1i cc: Andrew cc: freebsd-questions@FreeBSD.org cc: Kris Kennaway Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:35:45 -0000 --mYCpIKhGyMATD0i+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 11:59:52AM +1030, Greg 'groggy' Lehey wrote: > On Monday, 10 November 2003 at 9:56:06 +1030, Andrew wrote: > > Kris Kennaway wrote: > > > >> On Mon, Nov 10, 2003 at 08:48:19AM +1030, Andrew wrote: > >> > >>> Sorry your correct it is version 5.1 > >> > >> > >> 1) Please don't top-post..see how this message has lost context from > >> your original posting? > >> > >> 2) Which packages can't you find, and where precisely are you looking? > > > > I have been following the the examples in the book > > The Complete FreeBSD > > Greg Lehey > > there is no cdrecord, galeon, gpg, postfix, xtset, > > then i carry on reading it said if you installed instant-workstation off > > which i can not find either. > > I have tryed the install with out these packages but then I can not > > copy over file > > /usr/share/ske1/dot.bashrc >=20 > I suppose you mean /usr/share/skel/dot.bashrc. That's part of the > instant-workstation port. See my previous reply. Looking at the contents of the port, IYTM /usr/local/share/dot.bashrc. Kris --mYCpIKhGyMATD0i+ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rutuWry0BWjoQKURArF2AKC467mzQM4t22ynDbl7/GJcl10eCACfSd0k sSTxuyQy8R3rHK9eiLN3YaE= =V0cx -----END PGP SIGNATURE----- --mYCpIKhGyMATD0i+-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:51:46 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9FDCE16A4CE for ; Sun, 9 Nov 2003 17:51:46 -0800 (PST) Received: from ozlabs.org (ozlabs.org [203.10.76.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4578C43F75 for ; Sun, 9 Nov 2003 17:51:45 -0800 (PST) (envelope-from grog@lemis.com) Received: from blackwater.lemis.com (blackwater.lemis.com [192.109.197.80]) by ozlabs.org (Postfix) with ESMTP id 2A0162BD34 for ; Mon, 10 Nov 2003 12:51:43 +1100 (EST) Received: by blackwater.lemis.com (Postfix, from userid 1004) id 3F0C1511FA; Mon, 10 Nov 2003 12:21:41 +1030 (CST) Date: Mon, 10 Nov 2003 12:21:41 +1030 From: Greg 'groggy' Lehey To: Kris Kennaway Message-ID: <20031110015141.GM77527@wantadilla.lemis.com> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <3FAEBD2B.2050404@iweb.net.au> <20031109223435.GA595@xor.obsecurity.org> <3FAECD0E.9020906@iweb.net.au> <20031110012952.GL77527@wantadilla.lemis.com> <20031110013543.GA3450@xor.obsecurity.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="CgTrtGVSVGoxAIFj" Content-Disposition: inline In-Reply-To: <20031110013543.GA3450@xor.obsecurity.org> User-Agent: Mutt/1.4.1i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 cc: Andrew cc: freebsd-questions@FreeBSD.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:51:46 -0000 --CgTrtGVSVGoxAIFj Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Sunday, 9 November 2003 at 17:35:43 -0800, Kris Kennaway wrote: > On Mon, Nov 10, 2003 at 11:59:52AM +1030, Greg 'groggy' Lehey wrote: >> On Monday, 10 November 2003 at 9:56:06 +1030, Andrew wrote: >>> Kris Kennaway wrote: >>> >>>> On Mon, Nov 10, 2003 at 08:48:19AM +1030, Andrew wrote: >>>> >>>>> Sorry your correct it is version 5.1 >>>> >>>> >>>> 1) Please don't top-post..see how this message has lost context from >>>> your original posting? >>>> >>>> 2) Which packages can't you find, and where precisely are you looking? >>> >>> I have been following the the examples in the book >>> The Complete FreeBSD >>> Greg Lehey >>> there is no cdrecord, galeon, gpg, postfix, xtset, >>> then i carry on reading it said if you installed instant-workstation off >>> which i can not find either. >>> I have tryed the install with out these packages but then I can not >>> copy over file >>> /usr/share/ske1/dot.bashrc >> >> I suppose you mean /usr/share/skel/dot.bashrc. That's part of the >> instant-workstation port. See my previous reply. > > Looking at the contents of the port, IYTM /usr/local/share/dot.bashrc. Yes, indeed, as it should be. This is a bug in the book. Thanks for catching this one. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers. --CgTrtGVSVGoxAIFj Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (FreeBSD) iD8DBQE/ru8tIubykFB6QiMRAsULAJ9jAJtlaTNijaRZQDkGYXU09ikgIQCgjEOy KTGgEhuv2n4R/fTeF3r0mKE= =nZ4Z -----END PGP SIGNATURE----- --CgTrtGVSVGoxAIFj-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 17:53:30 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5AD4516A4CE for ; Sun, 9 Nov 2003 17:53:30 -0800 (PST) Received: from ozlabs.org (ozlabs.org [203.10.76.45]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4818643FBD for ; Sun, 9 Nov 2003 17:53:29 -0800 (PST) (envelope-from grog@lemis.com) Received: from blackwater.lemis.com (blackwater.lemis.com [192.109.197.80]) by ozlabs.org (Postfix) with ESMTP id 5DA4E2BD34 for ; Mon, 10 Nov 2003 12:53:27 +1100 (EST) Received: by blackwater.lemis.com (Postfix, from userid 1004) id 808FB511FA; Mon, 10 Nov 2003 12:23:25 +1030 (CST) Date: Mon, 10 Nov 2003 12:23:25 +1030 From: Greg 'groggy' Lehey To: Kris Kennaway Message-ID: <20031110015325.GN77527@wantadilla.lemis.com> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <20031110004959.GD553@dds.nl> <20031110010721.GB3060@xor.obsecurity.org> <20031110011256.GH553@dds.nl> <20031110011722.GA3207@xor.obsecurity.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="RNRUMt0ZF5Yaq/Aq" Content-Disposition: inline In-Reply-To: <20031110011722.GA3207@xor.obsecurity.org> User-Agent: Mutt/1.4.1i Organization: The FreeBSD Project Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-418-838-708 WWW-Home-Page: http://www.FreeBSD.org/ X-PGP-Fingerprint: 9A1B 8202 BCCE B846 F92F 09AC 22E6 F290 507A 4223 cc: Andrew cc: freebsd-questions@FreeBSD.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 01:53:30 -0000 --RNRUMt0ZF5Yaq/Aq Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Sunday, 9 November 2003 at 17:17:22 -0800, Kris Kennaway wrote: > On Mon, Nov 10, 2003 at 02:12:56AM +0100, Alex de Kruijff wrote: >> On Sun, Nov 09, 2003 at 05:07:21PM -0800, Kris Kennaway wrote: >>> On Mon, Nov 10, 2003 at 01:49:59AM +0100, Alex de Kruijff wrote: >>>> On Sun, Nov 09, 2003 at 04:32:24PM +0000, Matthew Seaman wrote: >>>>> On Mon, Nov 10, 2003 at 01:17:20AM +1030, Andrew wrote: >>>>> >>>>>> I have been trying to get FreeBSD 5.2 installed but i am unable to find >>>>>> all the packages that are required on the official cd-rom set i brought. >>>>>> i have tryed installing by FTP and i am still unable to find them >>>>>> This gouies for instant-workstation >>>>> >>>>> Hmmm... It seems you've gone astray in time. FreeBSD 5.2 has yet to >>>>> be released. See >>>>> http://www.freebsd.org/doc/en_US.ISO8859-1/articles/5-roadmap/schedule.html >>>>> >>>>> Perhaps you mean 5.1 ? >>>>> >>>>> You won't find all possible packages on the CD Rom set as there's >>>>> simply far too much stuff to fit onto the CDs. >>>> >>>> Instant-workstation is a wraparound for a couple of high used ports on a >>>> workstation. All the packages of all the ports its points to should be >>>> on the CDrom. >>> >>> Not that I could see.. >> >> I didn't very this manualy so I could be wrong. It would be a bit >> unlogicaly to not include packages that are refered to as bing a >> instant workstation, since a lot of ppl would get the idee to install >> it. > > instant-workstation is not included on cd#1. As stated, there isn't > enough space for everything. Instant-workstation itself is tiny. It consists of dependencies and a few small configuration files. It's mainly a matter of coordination with release engineering. Greg -- See complete headers for address and phone numbers. --RNRUMt0ZF5Yaq/Aq Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.0 (FreeBSD) iD8DBQE/ru+VIubykFB6QiMRAqrfAJ9fGHNlbLYYW15N/NF9OMnku+ieFQCffVhl ob7qUnimpeanMbBjzzPhEiI= =FpH8 -----END PGP SIGNATURE----- --RNRUMt0ZF5Yaq/Aq-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 18:00:47 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A018C16A4CF; Sun, 9 Nov 2003 18:00:47 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id B17B543FBD; Sun, 9 Nov 2003 18:00:46 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id A587466B28; Sun, 9 Nov 2003 18:00:45 -0800 (PST) Date: Sun, 9 Nov 2003 18:00:45 -0800 From: Kris Kennaway To: Greg 'groggy' Lehey Message-ID: <20031110020045.GA3807@xor.obsecurity.org> References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <20031110004959.GD553@dds.nl> <20031110010721.GB3060@xor.obsecurity.org> <20031110011256.GH553@dds.nl> <20031110011722.GA3207@xor.obsecurity.org> <20031110015325.GN77527@wantadilla.lemis.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="rwEMma7ioTxnRzrJ" Content-Disposition: inline In-Reply-To: <20031110015325.GN77527@wantadilla.lemis.com> User-Agent: Mutt/1.4.1i cc: Andrew cc: freebsd-questions@FreeBSD.org cc: Kris Kennaway Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 02:00:47 -0000 --rwEMma7ioTxnRzrJ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 12:23:25PM +1030, Greg 'groggy' Lehey wrote: > > instant-workstation is not included on cd#1. As stated, there isn't > > enough space for everything. >=20 > Instant-workstation itself is tiny. It consists of dependencies and a > few small configuration files. It's mainly a matter of coordination > with release engineering. The point is that including instant-workstation on the CD requires that the CD also include everything it depends on, which are not tiny and do not fit. Kris --rwEMma7ioTxnRzrJ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rvFNWry0BWjoQKURAiaoAJ4mhpqrQfJWV6c/eZscUX7KO9RTUQCg34CG ygo1zmL7sri89tiAzWznzI8= =m0hu -----END PGP SIGNATURE----- --rwEMma7ioTxnRzrJ-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 18:15:24 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 185BB16A4CE for ; Sun, 9 Nov 2003 18:15:24 -0800 (PST) Received: from deimos.frii.net (deimos.frii.net [216.17.128.193]) by mx1.FreeBSD.org (Postfix) with ESMTP id 54ACE43FE9 for ; Sun, 9 Nov 2003 18:15:23 -0800 (PST) (envelope-from aaron@justaaron.com) Received: from justaaron.com (dsc01-ari-co-204-32-202-40.rasserver.net [204.32.202.40]) by deimos.frii.net (8.12.10/8.12.10) with ESMTP id hAA2FEx4007630 for ; Sun, 9 Nov 2003 19:15:15 -0700 (MST) Message-ID: <3FAEF4AD.2050809@justaaron.com> Date: Sun, 09 Nov 2003 19:15:09 -0700 From: Aaron User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031029 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: Can't /.../rc.d/slapd.sh start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: aaron@justaaron.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 02:15:24 -0000 Hmmm, I just noticed this in the debug output from slapd.sh + /usr/local/libexec/slapd -u ldap -g ldap + _return=1 + [ 1 -ne 0 ] + [ -z ] I tried running slapd as above from the command line and failed. I ran slapd just as straight root, and it worked as expected. Then to shut down slapd I ran this: /usr/local/etc/rc.d/slapd.sh stop and that worked. So, the problem is related to slapd.sh running libexec/slapd with -u ldap -g ldap, together with whatever configuration problems I have. Looking into it. -- Aaron aaron@justaaron.com From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 18:48:58 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 08B3116A4CE for ; Sun, 9 Nov 2003 18:48:58 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3148643FE3 for ; Sun, 9 Nov 2003 18:48:57 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AJ26q-0006es-00; Sun, 09 Nov 2003 19:48:56 -0700 In-Reply-To: <20031109112856.GB94834@xor.obsecurity.org> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> Mime-Version: 1.0 (Apple Message framework v606) Message-Id: <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> From: "Chad Leigh -- Shire.Net LLC" Date: Sun, 9 Nov 2003 19:48:53 -0700 To: Kris Kennaway X-Mailer: Apple Mail (2.606) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-6.0 required=5.4 tests=BAYES_10,EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) cc: freebsd-questions@freebsd.org Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 02:48:58 -0000 On Nov 9, 2003, at 4:28 AM, Kris Kennaway wrote: > On Sun, Nov 09, 2003 at 01:33:23AM -0700, Chad Leigh -- Shire.Net LLC > wrote: >> Hi >> >> I have a linux server that needs to mount my FBSD server's web volume >> and the linux server only has v2 support right now (and I cannot make >> my own kernel since this is a UML kernel distributed as part of a >> product) and so I would like to run a v2 compatible nfs server on my >> FBSD server if possible. Can I do this? How? Thanks > > Read the mount_nfs and/or nfsd manpages..the answer is right there. The mount_nfs is for mounting on FreeBSD. I am serving from FreeBSD and mounting on Linux, so that does not apply. I read the nfsd man page a few time before posting, and just did again, and I see nothing in their about nfs versions except that the server listens on the port as outlined in thge NFS v3 spec. Please enlighten me on what I should read in the nfsd man page. Thanks Chad > > Kris From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 18:58:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 952F516A4CE for ; Sun, 9 Nov 2003 18:58:38 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id B70BF43FEA for ; Sun, 9 Nov 2003 18:58:37 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 1560E66B28; Sun, 9 Nov 2003 18:58:37 -0800 (PST) Date: Sun, 9 Nov 2003 18:58:37 -0800 From: Kris Kennaway To: "Chad Leigh -- Shire.Net LLC" Message-ID: <20031110025836.GA4520@xor.obsecurity.org> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="6c2NcOVqGQ03X4Wi" Content-Disposition: inline In-Reply-To: <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> User-Agent: Mutt/1.4.1i cc: freebsd-questions@FreeBSD.org cc: Kris Kennaway Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 02:58:38 -0000 --6c2NcOVqGQ03X4Wi Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 09, 2003 at 07:48:53PM -0700, Chad Leigh -- Shire.Net LLC wrote: >=20 > On Nov 9, 2003, at 4:28 AM, Kris Kennaway wrote: >=20 > >On Sun, Nov 09, 2003 at 01:33:23AM -0700, Chad Leigh -- Shire.Net LLC=20 > >wrote: > >>Hi > >> > >>I have a linux server that needs to mount my FBSD server's web volume > >>and the linux server only has v2 support right now (and I cannot make > >>my own kernel since this is a UML kernel distributed as part of a > >>product) and so I would like to run a v2 compatible nfs server on my > >>FBSD server if possible. Can I do this? How? Thanks > > > >Read the mount_nfs and/or nfsd manpages..the answer is right there. >=20 > The mount_nfs is for mounting on FreeBSD. I am serving from FreeBSD=20 > and mounting on Linux, so that does not apply. I read the nfsd man=20 > page a few time before posting, and just did again, and I see nothing=20 > in their about nfs versions except that the server listens on the port=20 > as outlined in thge NFS v3 spec. Please enlighten me on what I should=20 > read in the nfsd man page. OK, so it was a manpage listed in the cross-references..see mountd. Kris --6c2NcOVqGQ03X4Wi Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/rv7cWry0BWjoQKURAmROAJ94gEKoUI1KbEUiLBA20bGgMSX3ywCdGHtr TsL/gT2fsHbURhTK6XeMMOM= =X28+ -----END PGP SIGNATURE----- --6c2NcOVqGQ03X4Wi-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:03:36 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C72CB16A4CE for ; Sun, 9 Nov 2003 19:03:36 -0800 (PST) Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by mx1.FreeBSD.org (Postfix) with ESMTP id EC2E943FE0 for ; Sun, 9 Nov 2003 19:03:35 -0800 (PST) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.12.9/8.12.9) id hAA33Ziu047170; Sun, 9 Nov 2003 21:03:35 -0600 (CST) (envelope-from dan) Date: Sun, 9 Nov 2003 21:03:35 -0600 From: Dan Nelson To: "Chad Leigh -- Shire.Net LLC" Message-ID: <20031110030334.GG36548@dan.emsphone.com> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> X-OS: FreeBSD 5.1-CURRENT X-message-flag: Outlook Error User-Agent: Mutt/1.5.4i cc: freebsd-questions@freebsd.org cc: Kris Kennaway Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:03:36 -0000 In the last episode (Nov 09), Chad Leigh -- Shire.Net LLC said: > On Nov 9, 2003, at 4:28 AM, Kris Kennaway wrote: > >On Sun, Nov 09, 2003 at 01:33:23AM -0700, Chad Leigh -- Shire.Net LLC > >wrote: > >>I have a linux server that needs to mount my FBSD server's web > >>volume and the linux server only has v2 support right now (and I > >>cannot make my own kernel since this is a UML kernel distributed as > >>part of a product) and so I would like to run a v2 compatible nfs > >>server on my FBSD server if possible. Can I do this? How? Thanks > > > >Read the mount_nfs and/or nfsd manpages..the answer is right there. > > The mount_nfs is for mounting on FreeBSD. I am serving from FreeBSD > and mounting on Linux, so that does not apply. I read the nfsd man > page a few time before posting, and just did again, and I see nothing > in their about nfs versions except that the server listens on the > port as outlined in thge NFS v3 spec. Please enlighten me on what I > should read in the nfsd man page. You don't have to do anything actually. FreeBSD serves both NFSv2 and NFSv3 clients by default: $ rpcinfo -p | grep nfs 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs You can disable NFSv3 with the -2 option to mountd, but if you have to do that, then your Linux distro is extremely broken and you should have your vendor fix it. -- Dan Nelson dnelson@allantgroup.com From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:07:30 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 006F816A4CE for ; Sun, 9 Nov 2003 19:07:30 -0800 (PST) Received: from mta2.adelphia.net (mta2.adelphia.net [68.168.78.178]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0F05E43F85 for ; Sun, 9 Nov 2003 19:07:29 -0800 (PST) (envelope-from kgrotland@adelphia.net) Received: from cy27470a ([24.55.100.146]) by mta2.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031110030732.HDVL22526.mta2.adelphia.net@cy27470a> for ; Sun, 9 Nov 2003 22:07:32 -0500 From: "kgrotland" To: Date: Sun, 9 Nov 2003 20:14:11 -0700 Message-ID: <000001c3a738$b6ff55e0$8701a8c0@clspco.adelphia.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 Subject: FreeBSD 5.1 for Alpha X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:07:30 -0000 You will have to excuse me but im sorta new at this whole thing so i hope im asking the correct question. A friend of mine downloaded a copy of the FreeBSD 5.1 for Alpha ISO and burned it to CD for me. Now when i try to install it on an Alpha Workstation 200 it gets to a certain point in the boot process and then reboots itself. Could it be that the CD is faulty or could it just be that im doing something incorrectly. At this point i am no longer able to boot from the CDRom. Says failed to open. This occurs no matter which OS CD i try to boot. Any help would be appreciated. Cheers, Kjell :-) From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:08:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AE1F016A4CE for ; Sun, 9 Nov 2003 19:08:38 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id F2EBC43F75 for ; Sun, 9 Nov 2003 19:08:37 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AJ2Pt-0008jn-00; Sun, 09 Nov 2003 20:08:37 -0700 In-Reply-To: <20031110025836.GA4520@xor.obsecurity.org> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031110025836.GA4520@xor.obsecurity.org> Mime-Version: 1.0 (Apple Message framework v606) Message-Id: <2BEACB0D-132B-11D8-9FD6-003065A70D30@shire.net> From: "Chad Leigh -- Shire.Net LLC" Date: Sun, 9 Nov 2003 20:08:34 -0700 To: Kris Kennaway X-Mailer: Apple Mail (2.606) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-6.7 required=5.4 tests=BAYES_01,EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) cc: freebsd-questions@FreeBSD.org Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:08:38 -0000 X-List-Received-Date: Mon, 10 Nov 2003 03:08:38 -0000 Thanks! Chad On Nov 9, 2003, at 7:58 PM, Kris Kennaway wrote: > > OK, so it was a manpage listed in the cross-references..see mountd. > > Kris From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:09:05 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 461EE16A4CF for ; Sun, 9 Nov 2003 19:09:05 -0800 (PST) Received: from mail.seekingfire.com (coyote.seekingfire.com [24.72.10.212]) by mx1.FreeBSD.org (Postfix) with ESMTP id B294543F93 for ; Sun, 9 Nov 2003 19:09:03 -0800 (PST) (envelope-from tillman@seekingfire.com) Received: from blues.seekingfire.prv (blues.seekingfire.prv [192.168.23.211]) by mail.seekingfire.com (Postfix) with ESMTP id B8BD56B for ; Sun, 9 Nov 2003 21:09:02 -0600 (CST) Received: (from tillman@localhost) by blues.seekingfire.prv (8.11.6/8.11.6) id hAA392v14174 for freebsd-questions@freebsd.org; Sun, 9 Nov 2003 21:09:02 -0600 Date: Sun, 9 Nov 2003 21:09:01 -0600 From: Tillman Hodgson To: freebsd-questions@freebsd.org Message-ID: <20031109210901.Y31688@seekingfire.com> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net>; from chad@shire.net on Sun, Nov 09, 2003 at 07:48:53PM -0700 X-Urban-Legend: There is lots of hidden information in headers Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:09:05 -0000 On Sun, Nov 09, 2003 at 07:48:53PM -0700, Chad Leigh -- Shire.Net LLC wrote: > > On Nov 9, 2003, at 4:28 AM, Kris Kennaway wrote: > > > On Sun, Nov 09, 2003 at 01:33:23AM -0700, Chad Leigh -- Shire.Net LLC > > wrote: > >> Hi > >> > >> I have a linux server that needs to mount my FBSD server's web volume > >> and the linux server only has v2 support right now (and I cannot make > >> my own kernel since this is a UML kernel distributed as part of a > >> product) and so I would like to run a v2 compatible nfs server on my > >> FBSD server if possible. Can I do this? How? Thanks > > > > Read the mount_nfs and/or nfsd manpages..the answer is right there. > > The mount_nfs is for mounting on FreeBSD. I am serving from FreeBSD > and mounting on Linux, so that does not apply. I read the nfsd man > page a few time before posting, and just did again, and I see nothing > in their about nfs versions except that the server listens on the port > as outlined in thge NFS v3 spec. Please enlighten me on what I should > read in the nfsd man page. The client needs to request the mount version. Check the Linux man page for `mount`, under the "Mount options for nfs" section. man nfs(5) is also informative. It looks like the default for Linux NFS clients (at least on a fairly recent RedHat box) is to use version 2. As root, I just did the following on the RedHat client (served by my 4-STABLE NFS server, Athena): # mount -t nfs -o nfsvers=2 athena:/exports/pub test I then tested the results by running mount (results trimmed to only relevant examples ... warning, the lines are long and may wrap): # mount athena:/exports/pub on /nfs/pub type nfs (rw,noexec,nosuid,nodev,mountvers=3,hard,intr,nolock,udp,wsize=8192,rsize=8192,addr=192.168.23.3) athena:/exports/pub on /home/tillman/tmp/test type nfs (rw,nfsvers=2,addr=192.168.23.3) The first line is my regular mount of the 'pub' export from Athena. It's NFS version 3 because that's what I have in my /etc/fstab. The second line is my 'test' mount of the same export ... it's NFSv2 because that what I explicitly requested at the command line when running mount manually (as shown above). It's the same nfsd on the server side. I didn't do anything specify to enable NFS version 2, my rc.conf entry says nfs_server_flags="-u -t -n 14" (the 14 is because it's a high-usage NFS server and my testing shows that I consistently peak at around 12-14 nfsd's in use). You just have to have the client request that version. -T -- One day, a student asked a master, "Master, there is conflict between the suits and the sysadmins. Which group has the Zen nature, and which group is grieviously disturbing the stillness of the Tao?" And the master said nothing, but installed an operating system. And the student was enlightened. - A.S.R. quote (Anthony DeBoer) From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:09:50 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C666E16A4D0 for ; Sun, 9 Nov 2003 19:09:50 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6BF6B43FB1 for ; Sun, 9 Nov 2003 19:09:49 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AJ2R2-0008os-00; Sun, 09 Nov 2003 20:09:48 -0700 In-Reply-To: <20031110030334.GG36548@dan.emsphone.com> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031110030334.GG36548@dan.emsphone.com> Mime-Version: 1.0 (Apple Message framework v606) Message-Id: <566DA666-132B-11D8-9FD6-003065A70D30@shire.net> From: "Chad Leigh -- Shire.Net LLC" Date: Sun, 9 Nov 2003 20:09:46 -0700 To: Dan Nelson X-Mailer: Apple Mail (2.606) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-3.9 required=5.4 tests=BAYES_20,EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) cc: freebsd-questions@freebsd.org Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:09:50 -0000 On Nov 9, 2003, at 8:03 PM, Dan Nelson wrote: > You can disable NFSv3 with the -2 option to mountd, but if you have to > do that, then your Linux distro is extremely broken and you should have > your vendor fix it. > Yes, thanks. I am just trying to figure out the behavior of it and wanted to try that to see if it improved things. Thanks Chad From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:12:14 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 68B7616A4CE for ; Sun, 9 Nov 2003 19:12:14 -0800 (PST) Received: from mta6.adelphia.net (mta6.adelphia.net [68.168.78.190]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0294843FEA for ; Sun, 9 Nov 2003 19:12:13 -0800 (PST) (envelope-from parv_fm@mailsent.net) Received: from moo.holy.cow ([69.160.64.204]) by mta6.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with ESMTP id <20031110031216.VZPX3563.mta6.adelphia.net@moo.holy.cow>; Sun, 9 Nov 2003 22:12:16 -0500 Received: by moo.holy.cow (Postfix, from userid 1001) id E8A80A9D6; Sun, 9 Nov 2003 22:15:58 -0500 (EST) Date: Sun, 9 Nov 2003 22:15:58 -0500 From: parv To: Alex de Kruijff Message-ID: <20031110031558.GA4372@moo.holy.cow> Mail-Followup-To: Alex de Kruijff , Gary Kline , FreeBSD Mailing List References: <20031108224501.GA55641@tao.thought.org> <20031110005623.GE553@dds.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031110005623.GE553@dds.nl> cc: Gary Kline cc: FreeBSD Mailing List Subject: Re: ok, i give up; how acroread in mozilla??? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:12:14 -0000 in message <20031110005623.GE553@dds.nl>, wrote Alex de Kruijff thusly... > > On Sat, Nov 08, 2003 at 02:45:01PM -0800, Gary Kline wrote: > > > > People, > > > > Setting up netscape to use realplayer and acroread took > > awhile but I finally got it. I've been using mozilla > > more and more, but still haven't figured out howto get > > it to successfully spawn acroread. > > The online FreeBSD handbook has a chapter about brouwsers. I think it > also contains how to do this. Acroread comes up as desired in mozilla 1.5b & netscape navigator 4.8 when... - in ~/.mailcap i have... application/pdf; acroread %s - in netscape's Navigator->Application Helpers ... MIMEType: application/pdf Suffiexes: pdf Handled By->Application: acroread %s and, similarly for mozilla (Navigator->Helper Applications). I forgot if i had manually set the above settings or mozilla/netscape just read ~/.mailcap & adjusted themselves. - Parv -- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:45:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9653216A4CE for ; Sun, 9 Nov 2003 19:45:22 -0800 (PST) Received: from link.e-u-a.net (rrcs-midsouth-24-199-181-242.biz.rr.com [24.199.181.242]) by mx1.FreeBSD.org (Postfix) with ESMTP id A623D43FBF for ; Sun, 9 Nov 2003 19:45:21 -0800 (PST) (envelope-from ecrist@adtechintegrated.com) Received: from 192.168.1.100 (c-66-41-18-160.mn.client2.attbi.com [66.41.18.160]) by link.e-u-a.net (8.12.9p2/8.12.8) with ESMTP id hAA3jJi6068757 for ; Sun, 9 Nov 2003 22:45:20 -0500 (EST) (envelope-from ecrist@adtechintegrated.com) From: Eric F Crist Organization: AdTech Integrated Systems, Inc To: freebsd-questions@freebsd.org Date: Sun, 9 Nov 2003 21:45:01 -0600 User-Agent: KMail/1.5.2 MIME-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg=pgp-sha1; boundary="Boundary-02=_Enwr/sGbYvBu612"; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <200311092145.08827.ecrist@adtechintegrated.com> Subject: Mouse pointer problems in X X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: ecrist@adtechintegrated.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:45:22 -0000 --Boundary-02=_Enwr/sGbYvBu612 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Description: signed data Content-Disposition: inline Hey all, I recently changed my mouse from a Trackball explorer (7 buttons, w/wheel) = to=20 a wireless keyboard and mouse. Now, in X windows, my pointer is about 8=20 pixels to the right of where it's actually selected, if this makes sense. = It=20 makes things difficult when you get many small buttons or checkboxes=20 together. I've googled and I can't find anything. 'Pointers' would help, haha. TIA =2D-=20 Eric F Crist AdTech Integrated Systems, Inc (952) 403-9000 --Boundary-02=_Enwr/sGbYvBu612 Content-Type: application/pgp-signature Content-Description: signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQA/rwnEWxy3JtXvWloRAh4AAJ4v+8gleCQfrUv5NpAFUIi67IMYowCeMPiA ndNEVzLNS89VTkKBS8xIYvk= =0Q30 -----END PGP SIGNATURE----- --Boundary-02=_Enwr/sGbYvBu612-- From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 19:50:02 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7AC8816A4CE for ; Sun, 9 Nov 2003 19:50:02 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id A1AAF43FE1 for ; Sun, 9 Nov 2003 19:50:01 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AJ33w-000CuF-00 for freebsd-questions@freebsd.org; Sun, 09 Nov 2003 20:50:00 -0700 Mime-Version: 1.0 (Apple Message framework v606) In-Reply-To: <20031109210901.Y31688@seekingfire.com> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031109210901.Y31688@seekingfire.com> Message-Id: From: "Chad Leigh -- Shire.Net LLC" Date: Sun, 9 Nov 2003 20:49:58 -0700 To: freebsd-questions@freebsd.org X-Mailer: Apple Mail (2.606) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-6.7 required=5.4 tests=BAYES_01,EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 03:50:02 -0000 On Nov 9, 2003, at 8:09 PM, Tillman Hodgson wrote: > > It's the same nfsd on the server side. I didn't do anything specify to > enable NFS version 2, my rc.conf entry says nfs_server_flags="-u -t -n > 14" (the 14 is because it's a high-usage NFS server and my testing > shows > that I consistently peak at around 12-14 nfsd's in use). You just have > to have the client request that version. > My Linux is now mounting the FreeBSD served mounts, but it takes like 10 minutes for the mount to happen. The exports is simple /local/web -maproot=root and an address to allow mounting from The nfsd is the standard set of options as is the portmapper and mountd (mountd is -2r right now as a test though I am not sure that made a difference) I am not up and how to debug nfs problems. I would appreciate pointers on seeing why it takes forever. thanks Chad From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 20:17:20 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1CCEE16A4CE for ; Sun, 9 Nov 2003 20:17:20 -0800 (PST) Received: from sage.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.FreeBSD.org (Postfix) with ESMTP id D7ED943F3F for ; Sun, 9 Nov 2003 20:17:18 -0800 (PST) (envelope-from kline@thought.org) Received: from thought.org (root@tao [10.0.0.247]) by sage.thought.org (8.12.9/8.11.4) with ESMTP id hAA4HD5G044605; Sun, 9 Nov 2003 20:17:15 -0800 (PST) (envelope-from kline@thought.org) Received: (from kline@localhost) by thought.org (8.12.6/8.11.3) id hAA4H6mm090842; Sun, 9 Nov 2003 20:17:06 -0800 (PST) (envelope-from kline) Date: Sun, 9 Nov 2003 20:17:04 -0800 From: Gary Kline To: Alex de Kruijff , Gary Kline , FreeBSD Mailing List Message-ID: <20031110041704.GA90798@tao.thought.org> References: <20031108224501.GA55641@tao.thought.org> <20031110005623.GE553@dds.nl> <20031110031558.GA4372@moo.holy.cow> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031110031558.GA4372@moo.holy.cow> X-Organization: Thought Unlimited. Public service Unix since 1986. X-Of_Interest: Observing 17 years of service to the Unix community User-Agent: Mutt/1.5.5.1i Subject: Re: ok, i give up; how acroread in mozilla??? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 04:17:20 -0000 On Sun, Nov 09, 2003 at 10:15:58PM -0500, parv wrote: > in message <20031110005623.GE553@dds.nl>, > wrote Alex de Kruijff thusly... > > > > On Sat, Nov 08, 2003 at 02:45:01PM -0800, Gary Kline wrote: > > > > > > People, > > > > > > Setting up netscape to use realplayer and acroread took > > > awhile but I finally got it. I've been using mozilla > > > more and more, but still haven't figured out howto get > > > it to successfully spawn acroread. > > > > The online FreeBSD handbook has a chapter about brouwsers. I think it > > also contains how to do this. > > Acroread comes up as desired in mozilla 1.5b & netscape navigator > 4.8 when... > > - in ~/.mailcap i have... > > application/pdf; acroread %s > [[ ... ]] Maybe I should reinstall and *hope*. I'm running linux-mozilla-devel-1.5RC2. In my ~/.mailcap is:: ###application/pdf;/usr/local/bin/acroread %s > /dev/null 2>&1 application/pdf;/usr/local/bin/acroread %s The reasn for the full pathname above is that when I first tried to read a .pdf file, the ERROR was that l-m-d couldn't find aacroread. thanks for your help, gary > -- Gary Kline kline@thought.org www.thought.org Public service Unix From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 20:21:23 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 77C0F16A4CE for ; Sun, 9 Nov 2003 20:21:23 -0800 (PST) Received: from mail.seekingfire.com (coyote.seekingfire.com [24.72.10.212]) by mx1.FreeBSD.org (Postfix) with ESMTP id A345743FEA for ; Sun, 9 Nov 2003 20:21:22 -0800 (PST) (envelope-from tillman@seekingfire.com) Received: from blues.seekingfire.prv (blues.seekingfire.prv [192.168.23.211]) by mail.seekingfire.com (Postfix) with ESMTP id A486B2C for ; Sun, 9 Nov 2003 22:21:21 -0600 (CST) Received: (from tillman@localhost) by blues.seekingfire.prv (8.11.6/8.11.6) id hAA4LLj14528 for freebsd-questions@freebsd.org; Sun, 9 Nov 2003 22:21:21 -0600 Date: Sun, 9 Nov 2003 22:21:21 -0600 From: Tillman Hodgson To: freebsd-questions@freebsd.org Message-ID: <20031109222121.A31688@seekingfire.com> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031109210901.Y31688@seekingfire.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: ; from chad@shire.net on Sun, Nov 09, 2003 at 08:49:58PM -0700 X-Urban-Legend: There is lots of hidden information in headers Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 04:21:23 -0000 On Sun, Nov 09, 2003 at 08:49:58PM -0700, Chad Leigh -- Shire.Net LLC wrote: > My Linux is now mounting the FreeBSD served mounts, but it takes like > 10 minutes for the mount to happen. The exports is simple > > /local/web -maproot=root and an address to allow mounting from > > The nfsd is the standard set of options as is the portmapper and mountd > (mountd is -2r right now as a test though I am not sure that made a > difference) > > I am not up and how to debug nfs problems. I would appreciate pointers > on seeing why it takes forever. For that sort of problem, I'd check your name resolution first. -T -- "Your system does not appear to have GTK installed. Thus the Nmap X Front End will not compile. You should still be able to use Nmap the normal way (via text console). GUIs are for wimps anyway :)" - Error message seen while compiling nmap-fe From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 20:41:33 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8962F16A4CE for ; Sun, 9 Nov 2003 20:41:33 -0800 (PST) Received: from sage.thought.org (dsl231-043-140.sea1.dsl.speakeasy.net [216.231.43.140]) by mx1.FreeBSD.org (Postfix) with ESMTP id ED62843FAF for ; Sun, 9 Nov 2003 20:41:31 -0800 (PST) (envelope-from kline@thought.org) Received: from thought.org (root@tao [10.0.0.247]) by sage.thought.org (8.12.9/8.11.4) with ESMTP id hAA4fS5G044654; Sun, 9 Nov 2003 20:41:29 -0800 (PST) (envelope-from kline@thought.org) Received: (from kline@localhost) by thought.org (8.12.6/8.11.3) id hAA4fQRg090942; Sun, 9 Nov 2003 20:41:26 -0800 (PST) (envelope-from kline) Date: Sun, 9 Nov 2003 20:41:26 -0800 From: Gary Kline To: Gary Kline Message-ID: <20031110044126.GB90798@tao.thought.org> References: <20031108224501.GA55641@tao.thought.org> <20031110005623.GE553@dds.nl> <20031110031558.GA4372@moo.holy.cow> <20031110041704.GA90798@tao.thought.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031110041704.GA90798@tao.thought.org> X-Organization: Thought Unlimited. Public service Unix since 1986. X-Of_Interest: Observing 17 years of service to the Unix community User-Agent: Mutt/1.5.5.1i cc: FreeBSD Mailing List Subject: Re: ok, i give up; how acroread in mozilla??? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 04:41:33 -0000 On Sun, Nov 09, 2003 at 08:17:04PM -0800, Gary Kline wrote: > On Sun, Nov 09, 2003 at 10:15:58PM -0500, parv wrote: > > in message <20031110005623.GE553@dds.nl>, > > wrote Alex de Kruijff thusly... > > > > > > On Sat, Nov 08, 2003 at 02:45:01PM -0800, Gary Kline wrote: > > > > > > > > People, > > > > > > > > Setting up netscape to use realplayer and acroread took > > > > awhile but I finally got it. I've been using mozilla > > > > more and more, but still haven't figured out howto get > > > > it to successfully spawn acroread. > > > > > > The online FreeBSD handbook has a chapter about brouwsers. I think it > > > also contains how to do this. > > > > Acroread comes up as desired in mozilla 1.5b & netscape navigator > > 4.8 when... > > > > - in ~/.mailcap i have... > > > > application/pdf; acroread %s > > > > [[ ... ]] > > Maybe I should reinstall and *hope*. I'm running > linux-mozilla-devel-1.5RC2. > > In my ~/.mailcap is:: > > ###application/pdf;/usr/local/bin/acroread %s > /dev/null 2>&1 > application/pdf;/usr/local/bin/acroread %s > > The reasn for the full pathname above is that when I > first tried to read a .pdf file, the ERROR was that > l-m-d couldn't find aacroread. > Sorry for reposting atop my last post, but I just added the full pathname to the Helper Applications filetypes window. Now, no more errors, but acroread disappears almost instantly once the pdf file is saved to the Cache. I can use acroread to read the pdf file by-hand. Strange... . gary -- Gary Kline kline@thought.org www.thought.org Public service Unix From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 20:56:14 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 07A0C16A4CE for ; Sun, 9 Nov 2003 20:56:14 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0CE7743FDD for ; Sun, 9 Nov 2003 20:56:13 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AJ460-000JPM-00; Sun, 09 Nov 2003 21:56:12 -0700 In-Reply-To: <20031109222121.A31688@seekingfire.com> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031109210901.Y31688@seekingfire.com> <20031109222121.A31688@seekingfire.com> Mime-Version: 1.0 (Apple Message framework v606) Message-Id: <32F637C6-133A-11D8-9FD6-003065A70D30@shire.net> From: "Chad Leigh -- Shire.Net LLC" Date: Sun, 9 Nov 2003 21:56:09 -0700 To: Tillman Hodgson X-Mailer: Apple Mail (2.606) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-6.7 required=5.4 tests=BAYES_01,EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) cc: freebsd-questions@freebsd.org Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 04:56:14 -0000 On Nov 9, 2003, at 9:21 PM, Tillman Hodgson wrote: > For that sort of problem, I'd check your name resolution first. I'll check it again, as that was an issue at one time. Thanks Chad From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 21:32:43 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F35E816A4CE for ; Sun, 9 Nov 2003 21:32:42 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id D30B643FE5 for ; Sun, 9 Nov 2003 21:32:41 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AJ4fJ-000Nki-00 for freebsd-questions@freebsd.org; Sun, 09 Nov 2003 22:32:41 -0700 Mime-Version: 1.0 (Apple Message framework v606) In-Reply-To: <32F637C6-133A-11D8-9FD6-003065A70D30@shire.net> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031109210901.Y31688@seekingfire.com> <20031109222121.A31688@seekingfire.com> <32F637C6-133A-11D8-9FD6-003065A70D30@shire.net> Message-Id: <4C364FED-133F-11D8-9FD6-003065A70D30@shire.net> From: "Chad Leigh -- Shire.Net LLC" Date: Sun, 9 Nov 2003 22:32:38 -0700 To: freebsd-questions@freebsd.org X-Mailer: Apple Mail (2.606) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-6.0 required=5.4 tests=BAYES_10,EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 05:32:43 -0000 On Nov 9, 2003, at 9:56 PM, Chad Leigh -- Shire.Net LLC wrote: > > On Nov 9, 2003, at 9:21 PM, Tillman Hodgson wrote: > >> For that sort of problem, I'd check your name resolution first. > > I'll check it again, as that was an issue at one time. > It seems to be ok. I don't know what the problem is, but it seems to be on the Linux end as I run mountd and portmap with verbose debugging, as appropriate to each, and mountd immediately returns a "mount successful" but Liunx take 10 minutes to return from the mount command. Thanks all for the help. I'll go find a Linux forum to ask dumb questions on :-) Chad From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 22:27:05 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E5AA016A4CE for ; Sun, 9 Nov 2003 22:27:05 -0800 (PST) Received: from as9-2-1.bi.s.bonet.se (as9-2-1.bi.s.bonet.se [217.215.7.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id F3CFC43FE3 for ; Sun, 9 Nov 2003 22:27:04 -0800 (PST) (envelope-from peo@intersonic.se) Received: from intersonic.se (magnolia.h.inter-sonic.com [192.168.2.2]) by as9-2-1.bi.s.bonet.se (Postfix) with ESMTP id D7207D40A8 for ; Mon, 10 Nov 2003 07:27:03 +0100 (CET) Message-ID: <3FAF2FB7.7060902@intersonic.se> Date: Mon, 10 Nov 2003 07:27:03 +0100 From: Per olof Ljungmark Organization: Intersonic AB User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031109 X-Accept-Language: en-us, en, sv MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG References: <3FAEC7D7.4090809@intersonic.se> In-Reply-To: <3FAEC7D7.4090809@intersonic.se> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: build of cyrus-sasl2-saslauthd fails X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 06:27:06 -0000 Per olof Ljungmark wrote: > 4.9-RELEASE > > Building from ports tree fails with: > > cc -DHAVE_CONFIG_H > -DSASLAUTHD_CONF_FILE_DEFAULT=\"/usr/local/etc/saslauthd.conf\" -I. -I. > -I.. -I./include -I../include -I/usr/include -Wall -W -Wall -O -pipe > -c md5.c > cc -Wall -W -Wall -O -pipe -L/usr/local/lib -R/usr/local/lib -L/usr/lib > -L/usr/lib -o saslauthd mechanisms.o auth_dce.o auth_getpwent.o > auth_krb5.o auth_krb4.o auth_pam.o auth_rimap.o auth_shadow.o > auth_sia.o auth_sasldb.o lak.o auth_ldap.o cache.o utils.o ipc_unix.o > ipc_doors.o saslauthd-main.o md5.o -lgssapi_krb5 -lkrb5 -lk5crypto > -lcom_err -lcrypt ../sasldb/.libs/libsasldb.al -lpam > /usr/libexec/elf/ld: cannot find -lgssapi_krb5 > *** Error code 1 > > Stop in > /usr/ports/security/cyrus-sasl2-saslauthd/work/cyrus-sasl-2.1.15/saslauthd. > *** Error code 1 > > Stop in /usr/ports/security/cyrus-sasl2-saslauthd. Never mind, I was just in the wrong place, sorry. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 22:35:37 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C883C16A4CE for ; Sun, 9 Nov 2003 22:35:37 -0800 (PST) Received: from hotmail.com (law11-f29.law11.hotmail.com [64.4.17.29]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4364443F85 for ; Sun, 9 Nov 2003 22:35:36 -0800 (PST) (envelope-from weiwuzhang@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 9 Nov 2003 22:35:36 -0800 Received: from 218.17.188.204 by lw11fd.law11.hotmail.msn.com with HTTP; Mon, 10 Nov 2003 06:35:35 GMT X-Originating-IP: [218.17.188.204] X-Originating-Email: [weiwuzhang@hotmail.com] From: "Zhang Weiwu" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 14:35:35 +0800 Mime-Version: 1.0 Content-Type: text/plain; charset=gb2312; format=flowed Message-ID: X-OriginalArrivalTime: 10 Nov 2003 06:35:36.0123 (UTC) FILETIME=[D94BF0B0:01C3A754] Subject: simpliest way to calculate octal? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 06:35:37 -0000 Hello. Pretty newbie question again:) Today I found I cannot calculate what is the octal form of 0xa04e. First I thought xcalc should do the work, but it seems only deal with decimal. I have perl, tcsh, python interprater. It is likely that they are all capable of this kind, but what are the commands for them? What's the most convenient way? _________________________________________________________________ Ãâ·ŅÏÂÔØ MSN Explorer: http://explorer.msn.com/lccn From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 22:51:52 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BFDC716A4CE for ; Sun, 9 Nov 2003 22:51:52 -0800 (PST) Received: from mindfields.energyhq.es.eu.org (73.Red-213-97-200.pooles.rima-tde.net [213.97.200.73]) by mx1.FreeBSD.org (Postfix) with ESMTP id 98A0C43FCB for ; Sun, 9 Nov 2003 22:51:48 -0800 (PST) (envelope-from flynn@energyhq.es.eu.org) Received: from scienide.energyhq.es.eu.org (scienide.energyhq.es.eu.org [192.168.100.1]) by mindfields.energyhq.es.eu.org (Postfix) with SMTP id 252B43579D; Mon, 10 Nov 2003 07:51:46 +0100 (CET) Date: Mon, 10 Nov 2003 07:51:52 +0100 From: Miguel Mendez To: "Chad Leigh -- Shire.Net LLC" Message-Id: <20031110075152.5b06fe12.flynn@energyhq.es.eu.org> In-Reply-To: <4C364FED-133F-11D8-9FD6-003065A70D30@shire.net> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031109210901.Y31688@seekingfire.com> <20031109222121.A31688@seekingfire.com> <32F637C6-133A-11D8-9FD6-003065A70D30@shire.net> <4C364FED-133F-11D8-9FD6-003065A70D30@shire.net> Organization: X-Mailer: Sylpheed version 0.9.5-gtk2-20030906 (GTK+ 2.2.4; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 06:51:52 -0000 On Sun, 9 Nov 2003 22:32:38 -0700 "Chad Leigh -- Shire.Net LLC" wrote: Hi, > It seems to be ok. I don't know what the problem is, but it seems to > be on the Linux end as I run mountd and portmap with verbose > debugging, as appropriate to each, and mountd immediately returns a > "mount successful" but Liunx take 10 minutes to return from the mount > command. You probably want to use the 'nolock' option in Linux, that solved it from me. Cheers, -- Miguel Mendez http://www.energyhq.es.eu.org From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 22:55:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CBD9F16A4CE for ; Sun, 9 Nov 2003 22:55:22 -0800 (PST) Received: from mindfields.energyhq.es.eu.org (73.Red-213-97-200.pooles.rima-tde.net [213.97.200.73]) by mx1.FreeBSD.org (Postfix) with ESMTP id CAD2643FDF for ; Sun, 9 Nov 2003 22:55:21 -0800 (PST) (envelope-from flynn@energyhq.es.eu.org) Received: from scienide.energyhq.es.eu.org (scienide.energyhq.es.eu.org [192.168.100.1]) by mindfields.energyhq.es.eu.org (Postfix) with SMTP id 5E32635791; Mon, 10 Nov 2003 07:55:20 +0100 (CET) Date: Mon, 10 Nov 2003 07:55:26 +0100 From: Miguel Mendez To: "Zhang Weiwu" Message-Id: <20031110075526.420980e3.flynn@energyhq.es.eu.org> In-Reply-To: References: Organization: X-Mailer: Sylpheed version 0.9.5-gtk2-20030906 (GTK+ 2.2.4; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: simpliest way to calculate octal? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 06:55:22 -0000 On Mon, 10 Nov 2003 14:35:35 +0800 "Zhang Weiwu" wrote: Hi, > Today I found I cannot calculate what is the octal form of 0xa04e. > > First I thought xcalc should do the work, but it seems only deal with > decimal. > > I have perl, tcsh, python interprater. It is likely that they are all > capable of this kind, but what are the commands for them? What's the most > convenient way? How about: echo 0xa04e | awk '{printf "%o\n",$1}' Cheers, -- Miguel Mendez http://www.energyhq.es.eu.org From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 22:56:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2B22516A4DB for ; Sun, 9 Nov 2003 22:56:22 -0800 (PST) Received: from out2.smtp.messagingengine.com (out2.smtp.messagingengine.com [66.111.4.26]) by mx1.FreeBSD.org (Postfix) with ESMTP id EA09B43FA3 for ; Sun, 9 Nov 2003 22:56:20 -0800 (PST) (envelope-from freebsdQ0@richardshea.fastmail.fm) Received: from server2.messagingengine.com (server2.internal [10.202.2.133]) by mail.messagingengine.com (Postfix) with ESMTP id 649E83EC3BF for ; Mon, 10 Nov 2003 01:56:20 -0500 (EST) Received: by server2.messagingengine.com (Postfix, from userid 99) id 516E772026; Mon, 10 Nov 2003 01:56:20 -0500 (EST) Content-Disposition: inline Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="ISO-8859-1" MIME-Version: 1.0 X-Mailer: MIME::Lite 1.2 (F2.71; T1.001; A1.51; B2.12; Q2.03) From: "Richard Shea" To: "FreeBSD Questions" Date: Mon, 10 Nov 2003 19:56:20 +1300 X-Sasl-Enc: fkdowUzbfzVgb8rMC0AjVQ 1068447380 Message-Id: <20031110065620.516E772026@server2.messagingengine.com> Subject: Example of 'normal' cvsup-ports session ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 06:56:22 -0000 Could you anyone send me the output from a normal (ie succesful) cvsup-ports session ? I keep getting 'killed' appearing (what I think is) half-way through and I'm beginning to wonder if that's normal - ie is that just cvsup's way of saying 'I'm finished - goodbye' ? Here's an example - does it look normal ? ... trinidad# cvsup -g -L 2 ports-supfile Parsing supfile "ports-supfile" Connecting to cvsup6.au.FreeBSD.org Connected to cvsup6.au.FreeBSD.org Server software version: SNAP_16_1f Negotiating file attribute support Exchanging collection information Establishing multiplexed-mode data connection Running Updating collection ports-all/cvs Edit ports/INDEX-5 Add delta 1.7 2003.04.18.22.05.43 kris Add delta 1.8 2003.05.17.12.02.34 kris Add delta 1.9 2003.05.31.23.43.49 kris Add delta 1.10 2003.06.01.23.49.17 kris Add delta 1.11 2003.06.22.12.55.16 kris Add delta 1.12 2003.08.04.10.54.02 kris Add delta 1.13 2003.08.16.01.56.43 kris Add delta 1.14 2003.10.19.07.17.46 kris Killed trinidad# I'll paste cvsup-ports at the bottom of this email in case anyone is kind enough to comment on that. thanks richard. # $FreeBSD: src/share/examples/cvsup/ports-supfile,v 1.19.2.8 2002/12/15 15:47:22 lioux Exp $ # # This file contains all of the "CVSup collections" that make up the # FreeBSD-current ports collection. # # CVSup (CVS Update Protocol) allows you to download the latest CVS # tree (or any branch of development therefrom) to your system easily # and efficiently (far more so than with sup, which CVSup is aimed # at replacing). If you're running CVSup interactively, and are # currently using an X display server, you should run CVSup as follows # to keep your CVS tree up-to-date: # # cvsup ports-supfile # # If not running X, or invoking cvsup from a non-interactive script, then # run it as follows: # # cvsup -g -L 2 ports-supfile # # You may wish to change some of the settings in this file to better # suit your system: # # host=CHANGE_THIS.FreeBSD.org # This specifies the server host which will supply the # file updates. You must change it to one of the CVSup # mirror sites listed in the FreeBSD Handbook at # http://www.freebsd.org/doc/handbook/mirrors.html. # You can override this setting on the command line # with cvsup's "-h host" option. # # base=/usr # This specifies the root where CVSup will store information # about the collections you have transferred to your system. # A setting of "/usr" will generate this information in # /usr/sup. Even if you are CVSupping a large number of # collections, you will be hard pressed to generate more than # ~1MB of data in this directory. You can override the # "base" setting on the command line with cvsup's "-b base" # option. This directory must exist in order to run CVSup. # # prefix=/usr # This specifies where to place the requested files. A # setting of "/usr" will place all of the files requested # in "/usr/ports" (e.g., "/usr/ports/devel", "/usr/ports/lang"). # The prefix directory must exist in order to run CVSup. # Defaults that apply to all the collections # # IMPORTANT: Change the next line to use one of the CVSup mirror sites # listed at http://www.freebsd.org/doc/handbook/mirrors.html. *default host=cvsup6.au.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs tag=. *default delete use-rel-suffix # If your network link is a T1 or faster, comment out the following line. *default compress ## Ports Collection. # # The easiest way to get the ports tree is to use the "ports-all" # mega-collection. It includes all of the individual "ports-*" # collections, ports-all # These are the individual collections that make up "ports-all". If you # use these, be sure to comment out "ports-all" above. # # Be sure to ALWAYS cvsup the ports-base collection if you use any of the # other individual collections below. ports-base is a mandatory collection # for the ports collection, and your ports may not build correctly if it # is not kept up to date. #ports-base #ports-archivers #ports-astro #ports-audio #ports-benchmarks #ports-biology #ports-cad #ports-chinese #ports-comms #ports-converters #ports-databases #ports-deskutils #ports-devel #ports-editors #ports-emulators #ports-finance #ports-french #ports-ftp #ports-games #ports-german #ports-graphics #ports-hebrew #ports-hungarian #ports-irc #ports-japanese #ports-java #ports-korean #ports-lang #ports-mail #ports-math #ports-mbone #ports-misc #ports-multimedia #ports-net #ports-news #ports-palm #ports-picobsd #ports-portuguese #ports-print #ports-russian #ports-science #ports-security #ports-shells #ports-sysutils #ports-textproc #ports-ukrainian #ports-vietnamese #ports-www #ports-x11 #ports-x11-clocks #ports-x11-fm #ports-x11-fonts #ports-x11-servers #ports-x11-toolkits #ports-x11-wm From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 23:12:56 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D8DB416A4CE for ; Sun, 9 Nov 2003 23:12:56 -0800 (PST) Received: from hobbiton.shire.net (hobbiton.shire.net [206.71.64.250]) by mx1.FreeBSD.org (Postfix) with ESMTP id E919843FE9 for ; Sun, 9 Nov 2003 23:12:55 -0800 (PST) (envelope-from chad@shire.net) Received: from [67.161.247.57] (helo=[192.168.99.66]) by hobbiton.shire.net with asmtp (TLSv1:RC4-SHA:128) (Exim 4.10) id 1AJ6EI-0008kO-00; Mon, 10 Nov 2003 00:12:54 -0700 In-Reply-To: <20031110075152.5b06fe12.flynn@energyhq.es.eu.org> References: <61B97A72-128F-11D8-9FD6-003065A70D30@shire.net> <20031109112856.GB94834@xor.obsecurity.org> <6BE82884-1328-11D8-9FD6-003065A70D30@shire.net> <20031109210901.Y31688@seekingfire.com> <20031109222121.A31688@seekingfire.com> <32F637C6-133A-11D8-9FD6-003065A70D30@shire.net> <4C364FED-133F-11D8-9FD6-003065A70D30@shire.net> <20031110075152.5b06fe12.flynn@energyhq.es.eu.org> Mime-Version: 1.0 (Apple Message framework v606) Message-Id: <4CB5E2BF-134D-11D8-9FD6-003065A70D30@shire.net> From: "Chad Leigh -- Shire.Net LLC" Date: Mon, 10 Nov 2003 00:12:52 -0700 To: Miguel Mendez X-Mailer: Apple Mail (2.606) Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-6.7 required=5.4 tests=BAYES_01,EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_APPLEMAIL version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) cc: freebsd-questions@freebsd.org Subject: Re: NFS v2? possible? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 07:12:57 -0000 On Nov 9, 2003, at 11:51 PM, Miguel Mendez wrote: > On Sun, 9 Nov 2003 22:32:38 -0700 > "Chad Leigh -- Shire.Net LLC" wrote: > > Hi, > >> It seems to be ok. I don't know what the problem is, but it seems to >> be on the Linux end as I run mountd and portmap with verbose >> debugging, as appropriate to each, and mountd immediately returns a >> "mount successful" but Liunx take 10 minutes to return from the mount >> command. > > You probably want to use the 'nolock' option in Linux, that solved it > from me. > Thanks, I'll check. I did solve the problem though. The "runlevel" was set to be one less than full multi user mode which supposedly excluded nfs and I found a log file complaining about the client portmap daemon so I fixed that... Just got to get a new kernel to support v3 and do some tuning and we should be ok. thanks Chad > Cheers, > -- > Miguel Mendez > http://www.energyhq.es.eu.org From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 23:24:18 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 367DD16A4CE for ; Sun, 9 Nov 2003 23:24:18 -0800 (PST) Received: from ns2.wananchi.com (ns2.wananchi.com [62.8.64.4]) by mx1.FreeBSD.org (Postfix) with ESMTP id C4FFC44005 for ; Sun, 9 Nov 2003 23:24:16 -0800 (PST) (envelope-from wash@wananchi.com) Received: from wash by ns2.wananchi.com with local (Exim 4.24 #1 (FreeBSD 4.9)) id 1AJ6PD-000K68-MN by authid for ; Mon, 10 Nov 2003 10:24:11 +0300 Date: Mon, 10 Nov 2003 10:24:11 +0300 From: Odhiambo Washington To: freebsd-questions@freebsd.org Message-ID: <20031110072411.GA74712@ns2.wananchi.com> Mail-Followup-To: Odhiambo Washington , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-Disclaimer: Any views expressed in this message,where not explicitly attributed otherwise, are mine alone!. X-Mailer: Mutt 1.5.4i (2003-03-19) X-Designation: Systems Administrator, Wananchi Online Ltd. X-Location: Nairobi, KE, East Africa. X-Uptime: 10:22AM up 2 days, 59 mins, 2 users, load averages: 2.65, 4.58, 4.59 User-Agent: Mutt/1.5.4i Subject: Perl 5.8.1 : CPAN problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 07:24:18 -0000 FreeBSD 5.1-RELEASE. I upgraded perl from 5.8.0 to 5.8.1 using portupgrade. Now I cannot run the perl package module (CPAN). beastie# perl -MCPAN -e shell /usr/libexec/ld-elf.so.1: /usr/local/lib/perl5/site_perl/5.8.1/mach/auto/Term/ReadKey/ReadKey.so: Undefined symbol "Perl_Gthr_key_ptr" I wonder if anyone has encountered this and gotten a fix/solution around it. Thanks -Wash -- |\ _,,,---,,_ | Odhiambo Washington Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 + Pick another fortune cookie. From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 23:26:41 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EDB2716A4CE for ; Sun, 9 Nov 2003 23:26:41 -0800 (PST) Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id D737D43FBD for ; Sun, 9 Nov 2003 23:26:40 -0800 (PST) (envelope-from kstewart@owt.com) Received: from topaz-out (owt-207-41-94-233.owt.com [207.41.94.233]) by rutger.owt.com (8.11.6p2/8.9.3) with ESMTP id hAA7Qcu24801; Sun, 9 Nov 2003 23:26:38 -0800 From: Kent Stewart To: "Richard Shea" , "FreeBSD Questions" Date: Sun, 9 Nov 2003 23:26:37 -0800 User-Agent: KMail/1.5.4 References: <20031110065620.516E772026@server2.messagingengine.com> In-Reply-To: <20031110065620.516E772026@server2.messagingengine.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311092326.37641.kstewart@owt.com> Subject: Re: Example of 'normal' cvsup-ports session ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 07:26:42 -0000 On Sunday 09 November 2003 10:56 pm, Richard Shea wrote: > Could you anyone send me the output from a normal (ie succesful) > cvsup-ports session ? I keep getting 'killed' appearing (what I think is) > half-way through and I'm beginning to wonder if that's normal - ie is > that just cvsup's way of saying 'I'm finished - goodbye' ? Here's an > example - does it look normal ? ... > > trinidad# cvsup -g -L 2 ports-supfile > Parsing supfile "ports-supfile" > Connecting to cvsup6.au.FreeBSD.org > Connected to cvsup6.au.FreeBSD.org > Server software version: SNAP_16_1f > Negotiating file attribute support > Exchanging collection information > Establishing multiplexed-mode data connection > Running > Updating collection ports-all/cvs > Edit ports/INDEX-5 > Add delta 1.7 2003.04.18.22.05.43 kris > Add delta 1.8 2003.05.17.12.02.34 kris > Add delta 1.9 2003.05.31.23.43.49 kris > Add delta 1.10 2003.06.01.23.49.17 kris > Add delta 1.11 2003.06.22.12.55.16 kris > Add delta 1.12 2003.08.04.10.54.02 kris > Add delta 1.13 2003.08.16.01.56.43 kris > Add delta 1.14 2003.10.19.07.17.46 kris > Killed > trinidad# > > I'll paste cvsup-ports at the bottom of this email in case anyone is kind > enough to comment on that. > Parsing supfile "ports-supfile" Connecting to crystal Connected to crystal Server software version: SNAP_16_1h Negotiating file attribute support Exchanging collection information Establishing multiplexed-mode data connection Running Updating collection ports-all/cvs Edit ports/MOVED Add delta 1.265 2003.11.09.19.31.43 fjoe Edit ports/x11-toolkits/wxgtk2-unicode-contrib/Makefile Add delta 1.2 2003.11.09.19.25.48 fjoe Shutting down connection to server Finished successfully There was a lot more inbetween but the appearance is still the same. Crystal is my local cvs-mirror. You can continue without redoing anything. Have you tried different mirrors and do you have a timeout on your connection. My ports-supfile was similar to yours but I have removed all of the extraneous stuff. Kent -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html From owner-freebsd-questions@FreeBSD.ORG Sun Nov 9 23:46:59 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 05D2316A4CF for ; Sun, 9 Nov 2003 23:46:59 -0800 (PST) Received: from e4500a.callatg.com (e4500a.atgi.net [216.174.194.60]) by mx1.FreeBSD.org (Postfix) with SMTP id 4407743FA3 for ; Sun, 9 Nov 2003 23:46:58 -0800 (PST) (envelope-from jason_watkins@pobox.com) Received: (qmail 8525 invoked from network); 10 Nov 2003 07:46:55 -0000 Received: from unknown (HELO boondocks) (64.42.111.66) by e4500a.atgi.net with SMTP; 10 Nov 2003 07:46:55 -0000 Message-ID: <000701c3a75e$e156c370$426f2a40@boondocks> From: "jason watkins" To: Date: Sun, 9 Nov 2003 23:47:24 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: at my wit's end on buildworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 07:46:59 -0000 Well, I'm still having problems with buildworld on releng 4.9. My original problem was that make would fail on entering sendmail with a "don't know how to make" error. I removed /usr/src/* and /usr/sup/src-all/* and resynced with a different cvs server, and still had the same problem. So I edited make.conf to not build sendmail, since I don't need it. Now the build hangs with: gzip -cn /usr/src/usr.sbin/boot0cfg/boot0cfg.8 > boot0cfg.8.gz ===> etc Make appears to exit silently shortly after writing that output. I've tried additional resyncs, and I do remove the concents of /usr/obj/* before each build. I've seen another couple recent posts where clearing obj fixed a similar problem, but it hasn't worked for me. So, I'm at a loss. What do I do next? jason watkins From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 00:11:08 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EB2FF16A4CE for ; Mon, 10 Nov 2003 00:11:08 -0800 (PST) Received: from out2.smtp.messagingengine.com (out2.smtp.messagingengine.com [66.111.4.26]) by mx1.FreeBSD.org (Postfix) with ESMTP id D6B3D43F85 for ; Mon, 10 Nov 2003 00:11:07 -0800 (PST) (envelope-from freebsdQ0@richardshea.fastmail.fm) Received: from server2.messagingengine.com (server2.internal [10.202.2.133]) by mail.messagingengine.com (Postfix) with ESMTP id 909673EC160; Mon, 10 Nov 2003 03:11:07 -0500 (EST) Received: by server2.messagingengine.com (Postfix, from userid 99) id DCF1A7EA5C; Mon, 10 Nov 2003 03:11:06 -0500 (EST) Content-Disposition: inline Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="ISO-8859-1" MIME-Version: 1.0 X-Mailer: MIME::Lite 1.2 (F2.71; T1.001; A1.51; B2.12; Q2.03) From: "Richard Shea" To: "Kent Stewart" , "FreeBSD Questions" Date: Mon, 10 Nov 2003 21:11:06 +1300 X-Sasl-Enc: ayEFP2//kWedp95gvjCWRg 1068451866 References: <20031110065620.516E772026@server2.messagingengine.com> <200311092326.37641.kstewart@owt.com> In-Reply-To: <200311092326.37641.kstewart@owt.com> Message-Id: <20031110081106.DCF1A7EA5C@server2.messagingengine.com> Subject: Re: Example of 'normal' cvsup-ports session ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 08:11:09 -0000 On Sun, 9 Nov 2003 23:26:37 -0800, "Kent Stewart" said: > On Sunday 09 November 2003 10:56 pm, Richard Shea wrote: > > Could you anyone send me the output from a normal (ie succesful) > > cvsup-ports session ? I keep getting 'killed' appearing (what I think is) > > half-way through and I'm beginning to wonder if that's normal - ie is > > that just cvsup's way of saying 'I'm finished - goodbye' ? Here's an > > example - does it look normal ? ... > > > > trinidad# cvsup -g -L 2 ports-supfile > > Parsing supfile "ports-supfile" > > Connecting to cvsup6.au.FreeBSD.org > > Connected to cvsup6.au.FreeBSD.org > > Server software version: SNAP_16_1f > > Negotiating file attribute support > > Exchanging collection information > > Establishing multiplexed-mode data connection > > Running > > Updating collection ports-all/cvs > > Edit ports/INDEX-5 > > Add delta 1.7 2003.04.18.22.05.43 kris > > Add delta 1.8 2003.05.17.12.02.34 kris > > Add delta 1.9 2003.05.31.23.43.49 kris > > Add delta 1.10 2003.06.01.23.49.17 kris > > Add delta 1.11 2003.06.22.12.55.16 kris > > Add delta 1.12 2003.08.04.10.54.02 kris > > Add delta 1.13 2003.08.16.01.56.43 kris > > Add delta 1.14 2003.10.19.07.17.46 kris > > Killed > > trinidad# > > > > I'll paste cvsup-ports at the bottom of this email in case anyone is kind > > enough to comment on that. > > > > Parsing supfile "ports-supfile" > Connecting to crystal > Connected to crystal > Server software version: SNAP_16_1h > Negotiating file attribute support > Exchanging collection information > Establishing multiplexed-mode data connection > Running > Updating collection ports-all/cvs > Edit ports/MOVED > Add delta 1.265 2003.11.09.19.31.43 fjoe > Edit ports/x11-toolkits/wxgtk2-unicode-contrib/Makefile > Add delta 1.2 2003.11.09.19.25.48 fjoe > Shutting down connection to server > Finished successfully > > There was a lot more inbetween but the appearance is still the same. > Crystal > is my local cvs-mirror. You can continue without redoing anything. > > Have you tried different mirrors and do you have a timeout on your > connection. That's great - thanks. I have tried one or two different mirrors but I now I know what I'm getting is definetly abnormal I will try spreading my net a bit more widely. As far as timeout's go - I have an 'always-on' ADSL type connection so thankfully that isn't an issue. Anyway I'll try a few more mirrors and see if I get different results. Thanks for your help. regards richard. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 00:22:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C7FB816A4CE for ; Mon, 10 Nov 2003 00:22:16 -0800 (PST) Received: from out2.smtp.messagingengine.com (out2.smtp.messagingengine.com [66.111.4.26]) by mx1.FreeBSD.org (Postfix) with ESMTP id DCC2C43FD7 for ; Mon, 10 Nov 2003 00:22:15 -0800 (PST) (envelope-from freebsdQ0@richardshea.fastmail.fm) Received: from server2.messagingengine.com (server2.internal [10.202.2.133]) by mail.messagingengine.com (Postfix) with ESMTP id 546C53E3967; Mon, 10 Nov 2003 03:22:15 -0500 (EST) Received: by server2.messagingengine.com (Postfix, from userid 99) id AE06775F8A; Mon, 10 Nov 2003 03:22:14 -0500 (EST) Content-Disposition: inline Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="ISO-8859-1" MIME-Version: 1.0 X-Mailer: MIME::Lite 1.2 (F2.71; T1.001; A1.51; B2.12; Q2.03) From: "Richard Shea" To: "Kent Stewart" , "FreeBSD Questions" Date: Mon, 10 Nov 2003 21:22:14 +1300 X-Sasl-Enc: ZDmpigzbshtIL+1hwAHGOA 1068452534 References: <20031110065620.516E772026@server2.messagingengine.com> <200311092326.37641.kstewart@owt.com> In-Reply-To: <200311092326.37641.kstewart@owt.com> Message-Id: <20031110082214.AE06775F8A@server2.messagingengine.com> Subject: Re: Example of 'normal' cvsup-ports session ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 08:22:16 -0000 On Sun, 9 Nov 2003 23:26:37 -0800, "Kent Stewart" said: > On Sunday 09 November 2003 10:56 pm, Richard Shea wrote: > > Could you anyone send me the output from a normal (ie succesful) > > cvsup-ports session ? I keep getting 'killed' appearing (what I think is) > > half-way through and I'm beginning to wonder if that's normal - ie is > > that just cvsup's way of saying 'I'm finished - goodbye' ? Here's an > > example - does it look normal ? ... > > > > trinidad# cvsup -g -L 2 ports-supfile > > Parsing supfile "ports-supfile" > > Connecting to cvsup6.au.FreeBSD.org > > Connected to cvsup6.au.FreeBSD.org > > Server software version: SNAP_16_1f > > Negotiating file attribute support > > Exchanging collection information > > Establishing multiplexed-mode data connection > > Running > > Updating collection ports-all/cvs > > Edit ports/INDEX-5 > > Add delta 1.7 2003.04.18.22.05.43 kris > > Add delta 1.8 2003.05.17.12.02.34 kris > > Add delta 1.9 2003.05.31.23.43.49 kris > > Add delta 1.10 2003.06.01.23.49.17 kris > > Add delta 1.11 2003.06.22.12.55.16 kris > > Add delta 1.12 2003.08.04.10.54.02 kris > > Add delta 1.13 2003.08.16.01.56.43 kris > > Add delta 1.14 2003.10.19.07.17.46 kris > > Killed > > trinidad# > > > > I'll paste cvsup-ports at the bottom of this email in case anyone is kind > > enough to comment on that. > > > > Parsing supfile "ports-supfile" > Connecting to crystal > Connected to crystal > Server software version: SNAP_16_1h > Negotiating file attribute support > Exchanging collection information > Establishing multiplexed-mode data connection > Running > Updating collection ports-all/cvs > Edit ports/MOVED > Add delta 1.265 2003.11.09.19.31.43 fjoe > Edit ports/x11-toolkits/wxgtk2-unicode-contrib/Makefile > Add delta 1.2 2003.11.09.19.25.48 fjoe > Shutting down connection to server > Finished successfully > > There was a lot more inbetween but the appearance is still the same. > Crystal > is my local cvs-mirror. You can continue without redoing anything. > > Have you tried different mirrors and do you have a timeout on your > connection. > Having just sent the last email I happened to walk past the system console. There are *a lot* of "swap_pager_getswapspace:failed" messages ! So I think I've found at least part of teh problem ! As I said I only installed FreeBSD on that machine this afternoon so I'm not sure what's causing that I'll have to check it out but I don't think it's a CVSUP problem ! regards richard. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 00:28:24 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8724016A4DB for ; Mon, 10 Nov 2003 00:28:24 -0800 (PST) Received: from smtp.hotbox.ru (smtp.hotbox.ru [80.68.244.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id C71F743F93 for ; Mon, 10 Nov 2003 00:28:22 -0800 (PST) (envelope-from flux@hotbox.ru) Received: from cs6-mts-1-18.dialup.mts-nn.ru (cs6-mts-1-18.dialup.mts-nn.ru [213.177.101.18]) (authenticated bits=0) by smtp.hotbox.ru (8.12.9/8.12.9) with ESMTP id hAA8RKwJ040863; Mon, 10 Nov 2003 11:27:24 +0300 (MSK) (envelope-from flux@hotbox.ru) Date: Mon, 10 Nov 2003 11:33:53 +0300 From: Sergey Kulikov X-Mailer: The Bat! (v2.00.6) Business X-Priority: 3 (Normal) Message-ID: <1433549664.20031110113353@hotbox.ru> To: fbsd_user , freebsd-questions@freebsd.org In-Reply-To: References: <1872516063.20031107201004@hotbox.ru> MIME-Version: 1.0 Content-Type: text/plain; charset=Windows-1251 Content-Transfer-Encoding: 8bit Subject: Re[2]: Can't make the system see my modem! Please help!!! X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Sergey Kulikov List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 08:28:24 -0000 Thank you. f> Thanks so much for the help in getting my V.Everything Internal f> Modem working! f> I wanted to document the steps that I took so that in the future if f> Anyone else has this problem, hopefully this can point them in the f> right f> direction. f> To start with, I used the 'pnpinfo' command, and f> this got my hopes up that it was possible to get this modem working f> eventually. The output of pnpinfo was as follows: f> Checking for Plug-n-Play devices... f> Card assigned CSN #1 f> Vendor ID USR0101 (0x01017256), Serial Number 0xacb0bb15 f> PnP Version 1.0, Vendor Version 0 f> Device Description: USRobotics Courier V.Everything f> Logical Device ID: USR0009 0x09007256 #0 f> TAG Start DF f> Good Configuration f> FIXED I/O base address 0x2f8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG Start DF f> Acceptable Configuration f> FIXED I/O base address 0x3f8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG Start DF f> Acceptable Configuration f> FIXED I/O base address 0x3e8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG Start DF f> Acceptable Configuration f> FIXED I/O base address 0x2e8 length 0x8 f> IRQ: 3 4 5 7 9 - only one type (true/edge) f> TAG End DF f> End Tag f> Successfully got 16 resources, 1 logical fdevs f> -- card select # 0x0001 f> CSN USR0101 (0x01017256), Serial Number 0xacb0bb15 f> Logical device #0 f> IO: 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 0x03e8 f> IRQ 5 0 f> DMA 4 4 f> IO range check 0x00 activate 0x01 f> The part that is interesting to us is this: f> Card assigned CSN #1 f> Vendor ID USR0101 (0x01017256), Serial Number 0xacb0bb15 f> PnP Version 1.0, Vendor Version 0 f> Device Description: USRobotics Courier V.Everything f> Logical Device ID: USR0009 0x09007256 #0 f> According to the documentation in the file: f> /usr/share/doc/en/books/faq/book.txt f> we need to add the part after the USR0101, (which is 0x01017256), to f> the f> file /usr/src/sys/isa/sio.c, recompile our kernel, and voila, it f> should be f> found. f> However, this didn't work for me right away. I played around with f> it, and f> found that it was the number on the line labeled 'Logical Device ID' f> that I f> needed to add to the sio.c file. f> After trying that, I recompiled the kernel and it worked like a f> charm. f> -----Original Message----- f> From: owner-freebsd-questions@freebsd.org f> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Ņåðãåé f> Ęóëčęîâ f> Sent: Friday, November 07, 2003 12:10 PM f> To: freebsd-questions@freebsd.org f> Subject: Can't make the system see my modem! Please help!!! f> I have ELINE 576-PS (PCTel PCT789T-A Chipset) internal modem device f> and need to f> set it up under FreeBSD 4.7 box. GENERIC kernel says when booting: f> pci0: (vendor=0x134d, dev=0x7897) at 11.0 irq 9 f> As you see my modem is unknown for GENERIC kernel. I saw f> /boot/defaults/loader.conf and found no line corresponding to that f> particular modem at all. What should I do to make the system see the f> device and interact with one. f> Any help would be apreciated. f> -- f> Best regards, f> Ņåðãåé mailto:flux@hotbox.ru f> _______________________________________________ f> freebsd-questions@freebsd.org mailing list f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f> To unsubscribe, send any mail to f> "freebsd-questions-unsubscribe@freebsd.org" -- Best regards, Sergey mailto:flux@hotbox.ru From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 00:35:02 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6C71016A4CF for ; Mon, 10 Nov 2003 00:35:02 -0800 (PST) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id ACDA043FCB for ; Mon, 10 Nov 2003 00:34:58 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAA8YMnx009469 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 10 Nov 2003 08:34:52 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAA8YLYv009468; Mon, 10 Nov 2003 08:34:21 GMT (envelope-from matthew) Date: Mon, 10 Nov 2003 08:34:21 +0000 From: Matthew Seaman To: Aaron Message-ID: <20031110083421.GA8828@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Aaron , freebsd-questions@freebsd.org References: <3FAEF4AD.2050809@justaaron.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="DocE+STaALJfprDB" Content-Disposition: inline In-Reply-To: <3FAEF4AD.2050809@justaaron.com> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: freebsd-questions@freebsd.org Subject: Re: Can't /.../rc.d/slapd.sh start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 08:35:02 -0000 --DocE+STaALJfprDB Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 09, 2003 at 07:15:09PM -0700, Aaron wrote: > Hmmm, I just noticed this in the debug output from slapd.sh >=20 > + /usr/local/libexec/slapd -u ldap -g ldap > + _return=3D1 > + [ 1 -ne 0 ] > + [ -z ] >=20 > I tried running slapd as above from the command line and failed. slapd should have logged the reason why it didn't start up -- check /var/log/console.log, /var/log/all.log and /var/log/messages If the log message doesn't clarify things, turn up the log level in /usr/local/etc/openldap/slapd.conf (see slapd.conf(5)). Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --DocE+STaALJfprDB Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/r02NdtESqEQa7a0RAjbsAKCE80rjAZvAoJIf70x+iOGhaZZKMgCeJoH0 GtBTT2w00b+6IZW/RURhCoU= =5/EJ -----END PGP SIGNATURE----- --DocE+STaALJfprDB-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 00:53:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0EDD616A4CF for ; Mon, 10 Nov 2003 00:53:45 -0800 (PST) Received: from aaanet.ru (tmail.aaanet.ru [80.80.111.232]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1AD7E43F93 for ; Mon, 10 Nov 2003 00:53:42 -0800 (PST) (envelope-from haba@aaanet.ru) Received: from [80.80.113.181] (helo=ads.x10.com) by aaanet.ru with esmtp (Exim 4.20) id 1AJ7nc-000GDP-VR; Mon, 10 Nov 2003 11:53:40 +0300 X-AntiVirus: Checked by Dr.Web (http://www.drweb.net) Date: Mon, 10 Nov 2003 10:42:35 +0300 From: Vladimir X-Priority: 3 (Normal) Message-ID: <1665429171.20031110104235@aaanet.ru> To: Jens Rehsack In-Reply-To: <3FAE5C8E.3000709@liwing.de> References: <1225931937.20031025184822@aaanet.ru> <3F9AA3D8.9000303@liwing.de> <5714575171.20031026145709@aaanet.ru> <3F9BBE2D.2040402@liwing.de> <1245107859.20031027122032@aaanet.ru> <3F9CE69B.1040501@liwing.de> <863427343.20031027191934@aaanet.ru> <3F9D9E9B.2010808@liwing.de> <16018225140.20031109164812@aaanet.ru> <3FAE5C8E.3000709@liwing.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit cc: questions@freebsd.org Subject: Re[2]: Bind 9.2.3rc4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Vladimir List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 08:53:45 -0000 Hi, Jens. >>>>I now attach my config file with zones and log files. >>>>At 19:13 i have started named. >>>>At 19:15 "dig 127.0.0.1" >> JR> I'm busy for next 2 days. I'll prove it on Thursday if it's not to >> JR> late for you, ok? JR> Ok, I saved you cfg's into orig/, copied them into a new/ JR> directory and simplified it most I could. The diff is attached. JR> Would you please try whether it works so far? dig 127.0.0.1 dig 192.168.1.4 dig 192.168.1.1 Do not work :-( -- Regards, Vladimir mailto:haba@aaanet.ru From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 00:59:42 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C7B8016A4CF for ; Mon, 10 Nov 2003 00:59:42 -0800 (PST) Received: from mail.liwing.de (mail.liwing.de [213.70.188.162]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4624443FA3 for ; Mon, 10 Nov 2003 00:59:41 -0800 (PST) (envelope-from rehsack@liwing.de) Received: (qmail 30597 invoked from network); 10 Nov 2003 08:59:39 -0000 Received: from stingray.liwing.de (HELO liwing.de) ([213.70.188.164]) (envelope-sender ) by mail.liwing.de (qmail-ldap-1.03) with SMTP for ; 10 Nov 2003 08:59:39 -0000 Message-ID: <3FAF537A.4070402@liwing.de> Date: Mon, 10 Nov 2003 08:59:38 +0000 From: Jens Rehsack User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031102 X-Accept-Language: de-de, de, en-us, en MIME-Version: 1.0 To: Vladimir References: <1225931937.20031025184822@aaanet.ru> <3F9AA3D8.9000303@liwing.de> <5714575171.20031026145709@aaanet.ru> <3F9BBE2D.2040402@liwing.de> <1245107859.20031027122032@aaanet.ru> <3F9CE69B.1040501@liwing.de> <863427343.20031027191934@aaanet.ru> <3F9D9E9B.2010808@liwing.de> <16018225140.20031109164812@aaanet.ru> <3FAE5C8E.3000709@liwing.de> <1665429171.20031110104235@aaanet.ru> In-Reply-To: <1665429171.20031110104235@aaanet.ru> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: questions@freebsd.org Subject: Re: Bind 9.2.3rc4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 08:59:42 -0000 Vladimir wrote: > Hi, Jens. > > >>>>>I now attach my config file with zones and log files. >>>>>At 19:13 i have started named. >>>>>At 19:15 "dig 127.0.0.1" >>> >>>JR> I'm busy for next 2 days. I'll prove it on Thursday if it's not to >>>JR> late for you, ok? > > JR> Ok, I saved you cfg's into orig/, copied them into a new/ > JR> directory and simplified it most I could. The diff is attached. > JR> Would you please try whether it works so far? > > dig 127.0.0.1 > dig 192.168.1.4 > dig 192.168.1.1 > Do not work :-( Please use script(1) to submit the entire output. And please run the named with -d flag, too and submit even it's output. Jens From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 01:11:27 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CF51016A4CE for ; Mon, 10 Nov 2003 01:11:27 -0800 (PST) Received: from phys9911.phys.tue.nl (PHYS9911.phys.tue.nl [131.155.116.116]) by mx1.FreeBSD.org (Postfix) with ESMTP id B65A943FBF for ; Mon, 10 Nov 2003 01:11:26 -0800 (PST) (envelope-from karelj@phys9911.phys.tue.nl) Received: from phys9911.phys.tue.nl (localhost [127.0.0.1]) hAA9BVct011720; Mon, 10 Nov 2003 10:11:31 +0100 (CET) (envelope-from karelj@phys9911.phys.tue.nl) Received: (from karelj@localhost) by phys9911.phys.tue.nl (8.12.10/8.12.10/Submit) id hAA9BUxb011719; Mon, 10 Nov 2003 10:11:30 +0100 (CET) (envelope-from karelj) Date: Mon, 10 Nov 2003 10:11:30 +0100 From: "Karel J. Bosschaart" To: Robin Schoonover Message-ID: <20031110091130.GA11620@phys9911.phys.tue.nl> References: <20031109145538.0aa4ce3d.end@endif.cjb.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031109145538.0aa4ce3d.end@endif.cjb.net> User-Agent: Mutt/1.4.1i cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 09:11:28 -0000 On Sun, Nov 09, 2003 at 10:55:38PM +0100, Robin Schoonover wrote: > On Sun, 9 Nov 2003 16:40:30 -0500, Anish Mistry > wrote: > > > > This is what I have installed, and Enemy Territory runs fine for me. > Are > > you sure you have glx loaded in your XF86Config file? I'm using a > > Geforce2MX 400 with the nvidia driver. > > > > On a slightly related note, I've been trying to run some of the linux > loki > demos under FreeBSD. All work (plus heretic II, which has software > rendering), except the ones labeled "3d Acceleration". The ones labeled > "3d Acceleration" tend to crash X. > > One thing I've noticed is when X is started it displays: > (EE) NVIDIA(0): Failed to load GLX > > It appears to be finding the GLX stuff, but when it tries to load it, it > can't. If it helps any, I have a 'GeForce4 MX 440 with AGP8X'. > Games are running fine for me with the Nvidia driver and a GeForce4 Ti4200, on a -stable system. Below is a list I made some time ago with the games I can run successfully, with some notes. 'pcm' denotes the native FreeBSD sound driver, 'OSS' the (commercial) driver by Opensound. I have plans to make a website with this info as well as install notes and a forum for asking questions; I don't know though if there is a lot of need for this. Some time ago, the forum at swissgeeks closed down soon due to lack of interest. Personally, I'd like some chit-chat about gaming on FreeBSD :-). Karel. 2003-09-09 Linux games on FreeBSD Hardware: Athlon 1.4 GHz, Asus A7M266, 512 MB RAM, GeForce4 Ti 4200 128MB, onboa rd sound CMI8738. OS : FreeBSD 4.x (currently 4.9-PRERELEASE) Game Version pcm OSS remarks America's Army 1.7.0 (*) yes yes Descent 3 1.4 (*) yes yes Duke Nukem 3D Atomic Edition yes yes feels slowish. Heretic II 1.06a yes yes version on CD fails with sig11, updates fixed it. Quake 3 Arena 1.32b yes no Rune 1.07 lag(1) yes Serious Sam, The First Encounter 1.05 (beta3) yes yes Sin Demo 1.10 yes no Fullscreen wit h Nvidia driver flashes, windowed OK. Soldier of Fortune 1.06j lag(2) yes Unreal I yes using UT engin e, changed ALAudio to Generic (3) Unreal I: Return to Na Pali yes using UT engin e, changed ALAudio to Generic Unreal Tournament 4.36 yes no Unreal Tournament 2003 2225 yes yes used to have s ound lag with pcm? Urban Terror (Q3 Total Conversion) beta 3.0 yes no main menu some times garbled. RTCW Single Player Demo 1.1b yes no RTCW: Enemy Territory 2.55 yes no * update available 1 process rune-bin in pcmsyn after exit 2 exit screen stays with process sof-bin in pcmsyn. 3 Exits when entering 'Dark Arena' level. Workaround: unreal --nosound ( Unsupported rate: 18918 ) From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 03:18:26 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 61F6D16A4CE for ; Mon, 10 Nov 2003 03:18:26 -0800 (PST) Received: from mail-3.tiscali.it (mail-3.tiscali.it [195.130.225.149]) by mx1.FreeBSD.org (Postfix) with ESMTP id 58F0B43FDD for ; Mon, 10 Nov 2003 03:18:25 -0800 (PST) (envelope-from fcasadei@inwind.it) Received: from goku.kasby (82.84.234.181) by mail-3.tiscali.it (6.7.019) id 3FAB9069001BE744 for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 12:18:24 +0100 Received: (qmail 1637 invoked by uid 1000); 10 Nov 2003 11:18:08 -0000 Date: Mon, 10 Nov 2003 12:18:08 +0100 From: Francesco Casadei To: Zhang Weiwu Message-ID: <20031110111808.GA1604@goku.kasby> Mail-Followup-To: Zhang Weiwu , freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="AhhlLboLdkugWU4S" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.4.1i X-Operating-System: FreeBSD 4.9-STABLE i386 cc: freebsd-questions@freebsd.org Subject: Re: simpliest way to calculate octal? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 11:18:26 -0000 --AhhlLboLdkugWU4S Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 02:35:35PM +0800, Zhang Weiwu wrote: > Hello. Pretty newbie question again:) >=20 > Today I found I cannot calculate what is the octal form of 0xa04e. >=20 > First I thought xcalc should do the work, but it seems only deal with=20 > decimal. >=20 > I have perl, tcsh, python interprater. It is likely that they are all=20 > capable of this kind, but what are the commands for them? What's the most= =20 > convenient way? >=20 > _________________________________________________________________ > ???????? MSN Explorer: http://explorer.msn.com/lccn =20 >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o= rg" > end of the original message You can use 'bc' for this and other conversions: $ echo 'ibase =3D 16; obase =3D 8; A04E' | bc 120116 ibase and obase are the input and output base respectively. Note that you must use capital letters for exadecimal numbers, lower case letters are variable names. See bc(1) manual page for more information. Francesco Casadei --=20 You can download my public key from http://digilander.libero.it/fcasadei/ or retrieve it from a keyserver (pgpkeys.mit.edu, wwwkeys.pgp.net, ...) Key fingerprint is: 1671 9A23 ACB4 520A E7EE 00B0 7EC3 375F 164E B17B --AhhlLboLdkugWU4S Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/r3PvfsM3XxZOsXsRAjShAJ9gWTJroWOZUhehGpK2H/2XKyVhfACaApOL Iw2BTGAj9BwVNjEGpmqFDOc= =b8g+ -----END PGP SIGNATURE----- --AhhlLboLdkugWU4S-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 03:27:43 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AF79816A4CE for ; Mon, 10 Nov 2003 03:27:43 -0800 (PST) Received: from smtp.infracaninophile.co.uk (happy-idiot-talk.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id 973C143FF5 for ; Mon, 10 Nov 2003 03:27:41 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAABRSnx010888 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 10 Nov 2003 11:27:31 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAABRRek010887; Mon, 10 Nov 2003 11:27:27 GMT (envelope-from matthew) Date: Mon, 10 Nov 2003 11:27:27 +0000 From: Matthew Seaman To: Rishi Chopra Message-ID: <20031110112727.GB8828@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Rishi Chopra , questions@freebsd.org References: <3FAEE218.5080402@cal.berkeley.edu> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="5I6of5zJg18YgZEa" Content-Disposition: inline In-Reply-To: <3FAEE218.5080402@cal.berkeley.edu> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: questions@freebsd.org Subject: Re: Installing Without Video Card X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 11:27:43 -0000 --5I6of5zJg18YgZEa Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 09, 2003 at 04:55:52PM -0800, Rishi Chopra wrote: > Is there a way to install FreeBSD without a video card? Can I somehow=20 > install the OS over ethernet without having a video card and monitor=20 > hooked up? >=20 > Please email me at rchopra@cal.berkeley.edu if you can think of a way... Depends on the Motherboard/Bios -- some won't start to boot up unless there's some sort of video display. Plus generally you need a local video adapter in order to configure Bios settings. However, given that your system can get over that important initial hump, then it's perfectly feasible to install and run the system via a serial console. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install-advan= ced.html Note that a "serial console" is typically another computer connected serial-port to serial-port via a null-modem cable. You run tip(1) or some other terminal emulation software on the other machine which makes the first machine's console accessible from a login session. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --5I6of5zJg18YgZEa Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/r3YfdtESqEQa7a0RArO0AKCHYU4LQL9W3R/Sgjn5+6rKyFDjswCfT2pf 6AIbI3ElmiPWGOK0+VXF9x8= =Za2t -----END PGP SIGNATURE----- --5I6of5zJg18YgZEa-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 04:06:06 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 97ECA16A4CE for ; Mon, 10 Nov 2003 04:06:06 -0800 (PST) Received: from lilith.bellavista.cz (lilith.bellavista.cz [213.235.167.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id E0D8E43FBF for ; Mon, 10 Nov 2003 04:06:04 -0800 (PST) (envelope-from neuhauser@bellavista.cz) Received: from freepuppy.bellavista.cz (freepuppy.bellavista.cz [10.0.0.10]) by lilith.bellavista.cz (Postfix) with ESMTP id 3D2415E; Mon, 10 Nov 2003 13:06:02 +0100 (CET) Received: by freepuppy.bellavista.cz (Postfix, from userid 1001) id A4A4F2FDA03; Mon, 10 Nov 2003 13:06:01 +0100 (CET) Date: Mon, 10 Nov 2003 13:06:01 +0100 From: Roman Neuhauser To: Marty Landman Message-ID: <20031110120601.GH28665@freepuppy.bellavista.cz> Mail-Followup-To: Marty Landman , freebsd-questions@freebsd.org References: <20031109235155.8861.LUKEK@meibin.net> <6.0.0.22.0.20031109102036.04408558@pop.face2interface.com> <20031110072322.8868.LUKEK@meibin.net> <6.0.0.22.0.20031109184658.02f673b0@pop.face2interface.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <6.0.0.22.0.20031109184658.02f673b0@pop.face2interface.com> User-Agent: Mutt/1.5.4i cc: freebsd-questions@freebsd.org Subject: Re: No route to host X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 12:06:06 -0000 # MLandman@face2interface.com / 2003-11-09 19:00:28 -0500: > At 05:29 PM 11/9/2003, Luke Kearney wrote: > > >OK I think I see the problem. Your winblows machines are on a different > >network to the FBSD machine. Change FBSD to 192.168.0.7 and all should > >be just fine. > > Very cool Luke; this worked and my FBSD box now can ping my Windoz boxes > and vice versa. > > >There is no route to host for the other machines because > >as far as FBSD is concerned the other machines should be on a different > >wire. > > So that third node on the IP addr represents what, the switch? no, it's the subnet. ok, this is not a helpful answer. in one of your previous post, you wrote: 192.168.0.1 (win-xp) 192.168.0.150 (win-95) 192.168.7.7 (freebsd-4.8/mini) 192.168.0.3 (win-98) 192.168.0.160 (win-95) Destination Gateway Flags Refs Use Netif Expire 127.0.0.1 127.0.0.1 UH 0 0 lo0 192.168.7 link#1 UC 1 0 ep0 192.168.7.7 00:20:af:4d:24:b7 UHLW 0 1 lo0 #ifconfig -a ep0: flags=8843 mtu 1500 inet 192.168.7.7 netmask 0xffffff00 broadcast 192.168.7.255 ether 00:20:af:4d:24:b7 media: Ethernet 10baseT/UTP lp0: flags=8810 mtu 1500 faith0: flags=8002 mtu 1500 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 the netmask in the ifconfig output is important, because the host uses its ip address and the netmask to figure out where it should be sending packets for a given ip. it does so by "masking" the ip address with the netmask: the bits that are turned on in the mask cover "local" (in the network sense) part of the address; inet 192.168.7.7 netmask 0xffffff00 or the equivalent inet 192.168.7.7 netmask 255.255.255.0 means 192.168.7 is the part common to all hosts on the network, and there are 256 distinct addresses on the network (254 hosts, 0 for the address of the network, 255 for the broadcast address). addresses that are local (on the same wire) can be sent the packets directly, foreign addresses (on a different network) require passing the traffic through a box connected to the foreign logical network. you had no route configured for the 192.168.0/24 network, hence the error. > IOW you're saying since all the other boxes on the LAN are > 192.168.0.nnn the FBSD box needed to be as well? given the netmask you use, yes. or you could change the mask on all hosts to, say, 255.255.0.0. -- If you cc me or remove the list(s) completely I'll most likely ignore your message. see http://www.eyrie.org./~eagle/faqs/questions.html From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 04:07:30 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F216916A4CF for ; Mon, 10 Nov 2003 04:07:30 -0800 (PST) Received: from falcon.midgard.homeip.net (h76n3fls24o1048.bredband.comhem.se [213.67.148.76]) by mx1.FreeBSD.org (Postfix) with SMTP id BE30743FE5 for ; Mon, 10 Nov 2003 04:07:28 -0800 (PST) (envelope-from ertr1013@student.uu.se) Received: (qmail 13849 invoked by uid 1001); 10 Nov 2003 12:07:26 -0000 Date: Mon, 10 Nov 2003 13:07:26 +0100 From: Erik Trulsson To: jason watkins Message-ID: <20031110120726.GA13832@falcon.midgard.homeip.net> Mail-Followup-To: jason watkins , freebsd-questions@freebsd.org References: <000701c3a75e$e156c370$426f2a40@boondocks> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <000701c3a75e$e156c370$426f2a40@boondocks> User-Agent: Mutt/1.5.4i cc: freebsd-questions@freebsd.org Subject: Re: at my wit's end on buildworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 12:07:31 -0000 On Sun, Nov 09, 2003 at 11:47:24PM -0800, jason watkins wrote: > Well, I'm still having problems with buildworld on releng 4.9. My original > problem was that make would fail on entering sendmail with a "don't know how > to make" error. I removed /usr/src/* and /usr/sup/src-all/* and resynced > with a different cvs server, and still had the same problem. So I edited > make.conf to not build sendmail, since I don't need it. Now the build hangs > with: > > gzip -cn /usr/src/usr.sbin/boot0cfg/boot0cfg.8 > boot0cfg.8.gz > ===> etc > > Make appears to exit silently shortly after writing that output. As it should. The only things that should come after that are some sendmail related stuff, which you apparently told it not to build. If you have 'NO_SENDMAIL=true' in /etc/make.conf then the above is the last thing that builworld should output, and means it is finished. > I've tried > additional resyncs, and I do remove the concents of /usr/obj/* before each > build. I've seen another couple recent posts where clearing obj fixed a > similar problem, but it hasn't worked for me. > > So, I'm at a loss. What do I do next? Your next step should be to build and install a kernel, and then install the world. -- Erik Trulsson ertr1013@student.uu.se From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 04:47:33 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7D10116A4CE for ; Mon, 10 Nov 2003 04:47:33 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6E80143FCB for ; Mon, 10 Nov 2003 04:47:32 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hAACl0o2008672 for ; Mon, 10 Nov 2003 07:47:01 -0500 (EST) Message-Id: <6.0.0.22.0.20031110073738.01dc6af0@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Mon, 10 Nov 2003 07:47:26 -0500 To: freebsd-questions@freebsd.org From: Marty Landman In-Reply-To: <20031110120601.GH28665@freepuppy.bellavista.cz> References: <20031109235155.8861.LUKEK@meibin.net> <6.0.0.22.0.20031109102036.04408558@pop.face2interface.com> <20031110072322.8868.LUKEK@meibin.net> <6.0.0.22.0.20031109184658.02f673b0@pop.face2interface.com> <20031110120601.GH28665@freepuppy.bellavista.cz> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Subject: Host Name [was: No route to host] X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 12:47:33 -0000 At 07:06 AM 11/10/2003, Roman Neuhauser wrote: ># MLandman@face2interface.com / 2003-11-09 19:00:28 -0500: > > > > So that third node on the IP addr represents what, the switch? > > no, it's the subnet. ok, this is not a helpful answer. But your relating that to the subnet mask later makes total sense, thank you I feel enlightened. > given the netmask you use, yes. or you could change the mask on all > hosts to, say, 255.255.0.0. Sounds advanced and I'm happy leaving things as they are now. So hear's another question. Right now I can only access the fbsd box on my lan via ip addr; I set up a hostname but that doesn't seem to be the same as a symbolic name for the fbsd machine on my lan. Here's what /etc/rc.conf looks like: # This file no longer contains just the overrides from /etc/defaults/rc.conf. hostname="MyFBSD.my.domain" kern_securelevel_enable="NO" linux_enable="YES" moused_enable="YES" nfs_reserved_port_only="YES" sendmail_enable="YES" sshd_enable="YES" ifconfig_ep0="inet 192.168.0.7 netmask 255.255.255.0 media 10baseT/UTP" firewall_enable="no" I was surprised when after making this change to rc.conf and rebooting the ip addr got changed to something other than what is specified in rc.conf. $ ifconfig ep0: flags=8843 mtu 1500 inet6 fe80::220:afff:fe4d:24b7%ep0 prefixlen 64 scopeid 0x1 inet 192.168.0.222 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:20:af:4d:24:b7 media: Ethernet 10baseT/UTP lp0: flags=8810 mtu 1500 faith0: flags=8002 mtu 1500 lo0: flags=8049 mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010 mtu 1500 sl0: flags=c010 mtu 552 $ Finally, how do I enable .history for users other than root, and how do I specify how large the shell history may get? Thanks in advance, Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 05:03:01 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0369A16A4CF for ; Mon, 10 Nov 2003 05:03:01 -0800 (PST) Received: from lily.ezo.net (nsc.ezo.net [68.23.200.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id F034343F75 for ; Mon, 10 Nov 2003 05:02:59 -0800 (PST) (envelope-from jflowers@ezo.net) Received: from www.ezo.net (peony.ezo.net [68.23.200.11]) by lily.ezo.net (8.12.6/8.12.6) with ESMTP id hAAD31Tv005388 for ; Mon, 10 Nov 2003 08:03:01 -0500 (EST) (envelope-from jflowers@ezo.net) From: "Jim Flowers" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 08:03:33 -0500 Message-Id: <20031110125131.M9744@ezo.net> X-Mailer: Open WebMail 2.10 20031002 X-OriginatingIP: 24.93.231.122 (jflowers) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Subject: Update module ports after Perl upgrade? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 13:03:01 -0000 I just upgraded to perl-5.8.1 on my FreeBSD 4.9R system (5.8.0 threw an error on shared.bs) but after I had installed mysql-server which builds p5-DBI-137- 1.37 and p5-DBD-mysql-2.1026_1 as dependencies. In the past I have uninstalled perl modules and reinstalled them to get them in the right place to use with the upgraded perl version but it seems a bit hit-or-miss on establishing the new dependencies. What is the right, or at least preferred, way to do this? Thanks. -- Jim Flowers From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 05:07:12 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1791B16A4CE for ; Mon, 10 Nov 2003 05:07:12 -0800 (PST) Received: from av3.stonline.sk (av3.stonline.sk [213.81.152.34]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8ABD143FBD for ; Mon, 10 Nov 2003 05:07:10 -0800 (PST) (envelope-from danger@wilbury.sk) Received: from smtp.stonline.sk ([192.168.4.63]) by av3.stonline.sk (8.12.10/8.11.6) with ESMTP id hAAD78Ji024863 for ; Mon, 10 Nov 2003 14:07:09 +0100 Received: from telecom-213-145-233.telecom.sk (telecom-213-145-233.telecom.sk [213.81.145.233]) by smtp2.stonline.sk (STOnline ESMTP Server) with ESMTP id <0HO500M5Z0FTQE@smtp2.stonline.sk> for questions@freebsd.org; Mon, 10 Nov 2003 14:07:07 +0100 (MET) Date: Mon, 10 Nov 2003 14:07:30 +0100 From: DanGer To: questions@freebsd.org Message-id: <200311101407.30512.danger@wilbury.sk> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: KMail/1.5.4 X-RAVMilter-Version: 8.4.3(snapshot 20030212) (av3.stonline.sk) Subject: problem witch sound card X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: danger@wilbury.sk List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 13:07:12 -0000 my system is FreeBSD4.9-release and my sound card is Creative I have added to my kernel: device pcm and recompiled it. then i rebooted and there just wrote: es1371: wait src ready timeout 0x10 [0xffffff] and then it booted to the system, but sound card doesen't works :( what I have to do? Thanks a lot. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 05:30:29 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BE59816A4CF for ; Mon, 10 Nov 2003 05:30:29 -0800 (PST) Received: from lv.raad.tartu.ee (lv.raad.tartu.ee [194.126.106.110]) by mx1.FreeBSD.org (Postfix) with ESMTP id 349DC43F85 for ; Mon, 10 Nov 2003 05:30:28 -0800 (PST) (envelope-from toomas.aas@raad.tartu.ee) Received: Message by Barricade lv.raad.tartu.ee with ESMTP id hAADUQeF017213; Mon, 10 Nov 2003 15:30:26 +0200 Message-Id: <200311101330.hAADUQeF017213@lv.raad.tartu.ee> Received: from INFO/SpoolDir by raad.tartu.ee (Mercury 1.48); 10 Nov 03 15:30:53 +0200 Received: from SpoolDir by INFO (Mercury 1.48); 10 Nov 03 15:30:22 +0200 From: "Toomas Aas" Organization: Tartu City Government To: robin@NOSPAMreportlab.com Date: Mon, 10 Nov 2003 15:30:13 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Priority: normal In-reply-to: cc: questions@freebsd.org Subject: Re: DELL Poweredge 400 SC NIC X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 13:30:29 -0000 Hi! > In the setup I see no network devices are configured. There are a bunch > that I could select (eg IBM Etherjet, NE100,....etc), but I don't have > any good idea what to choose. These are just old non-PnP ISA NICs that you might need to configure or disable. If you have a modern PCI NIC then you don't need to worry about this screen at all. Your NIC will be detected automagically. -- Toomas Aas | toomas.aas@raad.tartu.ee | http://www.raad.tartu.ee/~toomas/ * Why is the third hand on a watch called a second hand? From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 06:19:25 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 63F4C16A4CE for ; Mon, 10 Nov 2003 06:19:25 -0800 (PST) Received: from hotmail.com (bay2-f106.bay2.hotmail.com [65.54.247.106]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5815D43F3F for ; Mon, 10 Nov 2003 06:19:24 -0800 (PST) (envelope-from missive@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 10 Nov 2003 06:19:24 -0800 Received: from 208.186.59.185 by by2fd.bay2.hotmail.msn.com with HTTP; Mon, 10 Nov 2003 14:19:23 GMT X-Originating-IP: [208.186.59.185] X-Originating-Email: [missive@hotmail.com] From: "Lee Harr" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 14:19:23 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 10 Nov 2003 14:19:24.0152 (UTC) FILETIME=[A4182F80:01C3A795] Subject: Re: Example of 'normal' cvsup-ports session ? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 14:19:25 -0000 > > Could you anyone send me the output from a normal (ie succesful) > > cvsup-ports session ? I keep getting 'killed' appearing > > Add delta 1.12 2003.08.04.10.54.02 kris > > Add delta 1.13 2003.08.16.01.56.43 kris > > Add delta 1.14 2003.10.19.07.17.46 kris > > Killed > > trinidad# >Having just sent the last email I happened to walk past the system >console. There are *a lot* of "swap_pager_getswapspace:failed" messages ! >So I think I've found at least part of teh problem ! As I said I only >installed FreeBSD on that machine this afternoon so I'm not sure what's >causing that I'll have to check it out but I don't think it's a CVSUP >problem ! Yea, I have seen that before when the disk was full. Check the output from df, swapinfo, and maybe watch the process in top as it crashes. _________________________________________________________________ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 07:07:47 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 58B5816A4CF for ; Mon, 10 Nov 2003 07:07:47 -0800 (PST) Received: from gull.mail.pas.earthlink.net (gull.mail.pas.earthlink.net [207.217.120.84]) by mx1.FreeBSD.org (Postfix) with ESMTP id 53A5B43FA3 for ; Mon, 10 Nov 2003 07:07:46 -0800 (PST) (envelope-from gws@silliman.net) Received: from user50.net168.nj.sprint-hsd.net ([65.164.204.50] helo=mgp.silliman.net) by gull.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 1AJDdp-0004oM-00 for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 07:07:45 -0800 Received: from silliman.net (gws.silliman.net [192.168.2.10]) by mgp.silliman.net (8.12.6/8.12.6) with ESMTP id hAAF7lNL035735 for ; Mon, 10 Nov 2003 10:07:47 -0500 (EST) (envelope-from gws@silliman.net) Message-ID: <3FAFA9BE.20306@silliman.net> Date: Mon, 10 Nov 2003 10:07:42 -0500 From: Guy Silliman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-5.8 required=5.0 tests=USER_AGENT_MOZILLA_UA version=2.53 X-Spam-Checker-Version: SpamAssassin 2.53 (1.174.2.15-2003-03-30-exp) Subject: Compaq 1850R panics with 5.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 15:07:47 -0000 I am trying to get a Compaq 1850R running. It is a dual PII 400MHz machine that works fine with Win2k server... but I would prefer to use fbsd 5.x but I am stumped by this panic at sysinstall. I have searched all the lists and have tried several fixes mentioned including the "Full table - Mapped" and OS set to Win2k in the BIOS. I have tried disabling the onboard NIC as a possible source of conflicts but no luck. I would be willing to go with a late 4.x but it does not probe the onboard SCSI thus I have no drives. I do have a Smart Array 3200 ordered and coming - this may solve the 4.x issue, but I am puzzled by the panic with 5.x. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 07:38:31 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 74AB616A4CE for ; Mon, 10 Nov 2003 07:38:31 -0800 (PST) Received: from freenet2.afn.org (freenet2.afn.org [128.227.163.12]) by mx1.FreeBSD.org (Postfix) with ESMTP id 53BC543FA3 for ; Mon, 10 Nov 2003 07:38:30 -0800 (PST) (envelope-from afn49349@afn.org) Received: from freenet1.afn.org (freenet1.afn.org [128.227.163.11]) by freenet2.afn.org (8.11.6/8.11.6) with ESMTP id hAAFcTQ25544 for ; Mon, 10 Nov 2003 10:38:29 -0500 Date: Mon, 10 Nov 2003 10:38:29 -0500 (EST) From: LM To: freebsd-questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: XFree86 difficulties X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 15:38:31 -0000 I'm trying to figure out if I can get X running on my system and could use some help. I have an ATI All-in-Wonder 128, AGP card with 32MB. I also recently purchased a Sony SDM-X72 TFT LCD Color Monitor with specs of: Horizontol Freq: 28-92kHz Vertical Freq:56-85Hz Max Resolution: 1280x1024 I tried configuring XFree86 through /stand/sysinstall. Found suggestions in the Usenet Newsgroups to set the card as ATI Rage 128 (generic). I tried that setting along with the various default screen types (VGA, Super VGa, Extended Super VGA, etc.). When I try startx, the screen displays the message that I'm out of scan range and displays frequencies 35.5Khz-87Hz. Does anyone know if I can get X Windows running with my current hardware? Any suggestions on setup? I guess I should also mention, I installed FreeBSD from a CD with release version 4.3. Wanted to get some idea of how it would work with my current system, before I go out and buy CDs for version 4.9. Thanks. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 07:48:01 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0682716A4CE for ; Mon, 10 Nov 2003 07:48:01 -0800 (PST) Received: from lakemtao04.cox.net (lakemtao04.cox.net [68.1.17.241]) by mx1.FreeBSD.org (Postfix) with ESMTP id E789943FB1 for ; Mon, 10 Nov 2003 07:47:59 -0800 (PST) (envelope-from jwm@sentinelchicken.net) Received: from sentinelchicken.net ([68.226.91.117]) by lakemtao04.cox.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031110154759.SATY19895.lakemtao04.cox.net@sentinelchicken.net> for ; Mon, 10 Nov 2003 10:47:59 -0500 Received: (qmail 82598 invoked by uid 1000); 10 Nov 2003 15:51:42 -0000 Date: Mon, 10 Nov 2003 10:51:42 -0500 From: Jason Morgan To: freebsd-questions@freebsd.org Message-ID: <20031110155141.GC11191@sentinelchicken.net> References: <20031109203729.GA11191@sentinelchicken.net> <20031109212858.GB99275@xor.obsecurity.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031109212858.GB99275@xor.obsecurity.org> User-Agent: Mutt/1.4.1i Subject: Re: 5.1 RELEASE - Panic X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 15:48:01 -0000 On Sun, Nov 09, 2003 at 01:28:58PM -0800, Kris Kennaway wrote: > On Sun, Nov 09, 2003 at 03:37:29PM -0500, freebsd@sentinelchicken.net wrote: > > I am currently running 5.1 RELEASE, as system I recently 'downgraded' from CURRENT. Since I moved back to RELEASE, the system has been giving me file > > system errors from time to time. I've run fsck - though I know very little of what I'm going with this utility. And now, I'm getting a PANIC, with > > the following error: > > > > mode = 041777, inum = 3, fs = /usr > > panic: ffs_valloc: dup alloc > > Debugger("panic") > > Stoped at Debugger+0x4d: xchgl %ebx,in_Debugger.0 > > > > I ran CURRENT on this system for 6-8 months and never got a panic - the system is not used all that often. > > > > Anyone have any suggestions as to what I can do? > > I usually get this on marginal (IBM deathstar) disks..it means you had > some kind of data corruption. > > There's not much you can do about it except for trying different disk > hardware if it happens a lot. I moved back to CURRENT and all is now working fine. Very strange error. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 08:14:06 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CB5DF16A4CE for ; Mon, 10 Nov 2003 08:14:06 -0800 (PST) Received: from web14001.mail.yahoo.com (web14001.mail.yahoo.com [216.136.175.92]) by mx1.FreeBSD.org (Postfix) with SMTP id 46D0043F93 for ; Mon, 10 Nov 2003 08:14:06 -0800 (PST) (envelope-from jimxoch@yahoo.gr) Message-ID: <20031110161355.50230.qmail@web14001.mail.yahoo.com> Received: from [193.218.2.30] by web14001.mail.yahoo.com via HTTP; Mon, 10 Nov 2003 16:13:55 GMT Date: Mon, 10 Nov 2003 16:13:55 +0000 (GMT) From: =?iso-8859-7?q?Dimitris=20Xochellis?= To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-7 Content-Transfer-Encoding: 8bit Subject: Routing selectively X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 16:14:06 -0000 Hi list, In my local network I have two routers that provide internet services. -Can I use them both simultaneously? -Do I need to have a second ethernet card (And add a second interface to rc.conf) in order to use them both? -Can I configure my FreeBSD box to use the first router when I am sending packets to a specific internet subnet and the second otherwise? -Any relative Docs or Examples please? I am using a FreeBSD(i386) 4.8 box. My current network setup inside the rc.conf is: ifconfig_rl0="inet X.X.X.2 netmask 255.255.255.0" hostname="me.host.gr" defaultrouter="X.X.X.1" router_enable="NO" Please cc me in case you respond. Thanks in advance, Jim Xochellis ____________________________________________________________ Do You Yahoo!? ÁðïęôÞóôå ôį äųņåÜí @yahoo.gr äéåýčõíóį óáō óôï http://www.otenet.gr From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 08:20:59 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7F61216A4CE for ; Mon, 10 Nov 2003 08:20:59 -0800 (PST) Received: from out012.verizon.net (out012pub.verizon.net [206.46.170.137]) by mx1.FreeBSD.org (Postfix) with ESMTP id 70FF443FE1 for ; Mon, 10 Nov 2003 08:20:58 -0800 (PST) (envelope-from cesarm@verizon.net) Received: from outgoing.verizon.net ([192.168.1.8]) by out012.verizon.net (InterMail vM.5.01.06.06 201-253-122-130-106-20030910) with ESMTP id <20031110162057.LNFN910.out012.verizon.net@outgoing.verizon.net> for ; Mon, 10 Nov 2003 10:20:57 -0600 X-Mailer: Openwave WebEngine, version 2.8.10 (webedge20-101-190-20021211) From: To: Date: Mon, 10 Nov 2003 10:20:57 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Authentication-Info: Submitted using SMTP AUTH at out012.verizon.net from [192.168.1.8] at Mon, 10 Nov 2003 10:20:57 -0600 Message-Id: <20031110162057.LNFN910.out012.verizon.net@outgoing.verizon.net> Subject: BSDlatino X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 16:20:59 -0000 Hi, My name is Cesar Morillo, this is to let you know about a channel on the IRC, Undernet (IRC.Undernet. org), that is a group of friends that are there to talk about *BSD, help users who doesn't talk english, and we think that is a good idea to help users with *BSD in Spanish. With this letter we just want to know if you, the FreeBSD Staff, are intersting in put an announcement telling Latino people, that there is a channel that they can go and interact in a very warm environment. The channel is #BSDlatino We also have the domain "BSDlatino.org" Thanks. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 08:33:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 577E116A4CE for ; Mon, 10 Nov 2003 08:33:19 -0800 (PST) Received: from mx2.millerzell.com (mx2.millerzell.com [204.183.156.202]) by mx1.FreeBSD.org (Postfix) with ESMTP id 29F9043FBD for ; Mon, 10 Nov 2003 08:33:18 -0800 (PST) (envelope-from Andrew.Boring@millerzell.com) Received: from WS-EXCHANGE2003.corp.millerzell.com (unknown [10.10.1.47]) by mx2.millerzell.com (Postfix) with ESMTP id 7FDAE4A050 for ; Mon, 10 Nov 2003 11:25:01 -0500 (EST) X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0 Content-class: urn:content-classes:message Date: Mon, 10 Nov 2003 11:32:42 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Disk block size tuning - multiple questions Thread-Index: AcOnqFfK/2eJbx1MRNmkRk8bw0PJYQ== From: "Boring, Andrew" To: Subject: Disk block size tuning - multiple questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 16:33:19 -0000 Greetings! First question: I am configuring a server to hold source trees for 4.8/4.9 and maybe = -current for production and experimental upgrades on my several FreeBSD = servers. Currently, I only keep the -release sources for maintaining = patchlevels on the individual boxes themselves. The last time I started = adding the -current source tree on a non-production server, I ran out of = inodes before actually completing the CVS sync. What newfs = blocksize/fragment size and inode density is optimal for 10 to 16 GB = partition containing just source trees? The default stripe size on the = RAID controller is set to 128k for mirrored drives. Hardware: Compaq ProLiant DL360, dual 18GB (mirrored) drives, with = Compaq 5i SmartArray controller. FreeBSD 5.1 Next question: Are there optimal newfs block/fragment/inode options for a quad-disk, = 1+0 RAID for a mail server running Postfix? Specifically, the queue = directory and the home (Maildir) directories are what I'll need to = optimize. I think the queue directory will be heavy read/write, whereas = I imagine that the Maildir directories (kept on a different partition) = will be more write-intensive over-all. The queue directory will reside = on a (approximately) 1 GB /var partition, and the Maildirs will be on a = roughly 27 GB /home partition (no other user files on /home). The = default stripe size on the RAID controller is set to 128k for mirrored = drives. I was looking at the tuning(7) recommendations of something like = block size 8192 and frag size 1024 for the queue and Maildir = directories. SInce Maildir will have to accomodate occasional large = files with attachments, this seems like it might be a happy medium. I = don't have a specific usage pattern developed on the number of/size of = email files and attachments, so I am planning on a vague, nebulous = "average email use". Hardware: SGI 1200, quad 18GB (RAID 1+0) drives, Compaq 4200 SmartArray = controller, FreeBSD 4.9 Another question: I've been doing a lot of reading on filesystem/RAID levels for database = use (I'm not a DB guy). I don't have a server ready for this yet, but i = would like some generic recommendations on filesystem setup. I've read = that mirrored stripes (0+1 or 1+0) is better overall than RAID 5. Any = other tuning tips, such as block size, inode, async/sync/softupdates, = etc for a partition to hold an SQL database (such as MySQL or Postgres, = etc)? The tuning(7) man page seems to indicate a default block size = (16k) but fewer inodes for databases. Hardware: SGI 1200, quad 18GB (RAID 1+0) drives, Compaq 4200 SmartArray = controller, FreeBSD 4.9 Last question: With a good battery-backed caching controller (such as the Compaq = SmartArray cards), is SoftUpdates of any use? My understanding is that = SoftUpdates does in software the same sort of caching that RAID = controllers would do. Am I correct or way off base? Should I mount all = drives synchronous without SoftUpdates, or asynchronous with = SoftUpdates, or what is the recommended choice when using real = server-class SCSI RAID controllers? I am more concerned overall with = higher-availability than higher-performance. Thanks in advance! (please Cc: me on all responses for this thread; I'm not subscribed) -- Andrew Boring Miller Zell Desktop Services =20 "Microsoft DNS service terminates abnormally when it receives a response to a dns query that was never made. Fix information: run your DNS service on a different platform." -- bugtraq http://www.securityfocus.com/archive/1/6212 From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 08:37:11 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B394316A4CE for ; Mon, 10 Nov 2003 08:37:11 -0800 (PST) Received: from smtpzilla1.xs4all.nl (smtpzilla1.xs4all.nl [194.109.127.137]) by mx1.FreeBSD.org (Postfix) with ESMTP id DC8F043FE1 for ; Mon, 10 Nov 2003 08:37:07 -0800 (PST) (envelope-from edvk2@xs4all.nl) Received: from xs4all.nl (a80-127-22-88.adsl.xs4all.nl [80.127.22.88]) by smtpzilla1.xs4all.nl (8.12.9/8.12.9) with ESMTP id hAAGb6V5077716 for ; Mon, 10 Nov 2003 17:37:07 +0100 (CET) Message-ID: <3FAFC012.3030208@xs4all.nl> Date: Mon, 10 Nov 2003 17:42:58 +0100 From: ed User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.1) Gecko/20020830 X-Accept-Language: en-us, en MIME-Version: 1.0 To: FreeBSD-Questions@FreeBSD.ORG Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: freebsd newbee problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 16:37:11 -0000 i have the problem that when i try installing freebsd 4.8 after about 3 minutes the monitor goes black and there is no way to reactivate it unless by restarting. i tried two different monitors, an old tulip and a maggellan of about three years old but both have this annoying problem hope you can help ed van kuipers holland edvk2@xs4all.nl From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 08:46:05 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 504EF16A4CE for ; Mon, 10 Nov 2003 08:46:05 -0800 (PST) Received: from mta3.adelphia.net (mta3.adelphia.net [68.168.78.181]) by mx1.FreeBSD.org (Postfix) with ESMTP id 55E7243FE9 for ; Mon, 10 Nov 2003 08:46:04 -0800 (PST) (envelope-from fbsd_user@a1poweruser.com) Received: from barbish ([68.169.105.65]) by mta3.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031110164607.PUHS14564.mta3.adelphia.net@barbish>; Mon, 10 Nov 2003 11:46:07 -0500 From: "fbsd_user" To: "ed" , Date: Mon, 10 Nov 2003 11:46:03 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) In-Reply-To: <3FAFC012.3030208@xs4all.nl> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: RE: freebsd newbee problem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: fbsd_user@a1poweruser.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 16:46:05 -0000 Check PC bios and disable all power saving settings for monitor. -----Original Message----- From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of ed Sent: Monday, November 10, 2003 11:43 AM To: FreeBSD-Questions@FreeBSD.ORG Subject: freebsd newbee problem i have the problem that when i try installing freebsd 4.8 after about 3 minutes the monitor goes black and there is no way to reactivate it unless by restarting. i tried two different monitors, an old tulip and a maggellan of about three years old but both have this annoying problem hope you can help ed van kuipers holland edvk2@xs4all.nl _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 08:49:39 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 419F716A4CE for ; Mon, 10 Nov 2003 08:49:39 -0800 (PST) Received: from pi.codefab.com (pi.codefab.com [66.234.138.67]) by mx1.FreeBSD.org (Postfix) with ESMTP id D557843F93 for ; Mon, 10 Nov 2003 08:49:37 -0800 (PST) (envelope-from cswiger@mac.com) Received: from [10.1.1.193] (dpvc-68-161-244-25.ny325.east.verizon.net [68.161.244.25]) by pi.codefab.com (8.12.9p2/8.12.10) with ESMTP id hAAGnQEC026358; Mon, 10 Nov 2003 11:49:26 -0500 (EST) In-Reply-To: <20031110161355.50230.qmail@web14001.mail.yahoo.com> References: <20031110161355.50230.qmail@web14001.mail.yahoo.com> Mime-Version: 1.0 (Apple Message framework v606) Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: Content-Transfer-Encoding: 7bit From: Charles Swiger Date: Mon, 10 Nov 2003 11:49:25 -0500 To: Dimitris Xochellis X-Mailer: Apple Mail (2.606) X-Spam-Status: No, hits=0.0 required=7.0 tests=none autolearn=no version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on pi.codefab.com cc: freebsd-questions@freebsd.org Subject: Re: Routing selectively X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 16:49:39 -0000 On Nov 10, 2003, at 11:13 AM, Dimitris Xochellis wrote: > In my local network I have two routers that provide > internet services. > > -Can I use them both simultaneously? Yes. > -Do I need to have a second ethernet card (And add a > second interface to rc.conf) in order to use them > both? No, but it might be easier to configure a sensible network topology using two cards. Otherwise, you can configure a virtual interface ("ifconfig rl0 alias YYY")... > -Can I configure my FreeBSD box to use the first > router when I am sending packets to a specific > internet subnet and the second otherwise? Sure. > -Any relative Docs or Examples please? Normally, one has one "default route", which tells all non-local traffic to go via your preferred router. You can add additional routes like so: route add -net 1.2.3.0/24 router1 route add -net 4.5.6.0/24 router2 There are better ways of managing routing than this, including setting up BGP/EGP peering with your ISPs, or some other routing protocol (OSPF), but this should get you started.... -- -Chuck From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 09:16:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 43EB416A4CE for ; Mon, 10 Nov 2003 09:16:22 -0800 (PST) Received: from x11.quik.com (x11.quik.com [216.176.28.111]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5636743F85 for ; Mon, 10 Nov 2003 09:16:20 -0800 (PST) (envelope-from jimwatts@quik.com) Received: (from root@localhost) by x11.quik.com (8.12.9-20030926/8.12.5) id hAAHGKXp012744 for questions@freebsd.org.qbigmail; Mon, 10 Nov 2003 09:16:20 -0800 Received: from quik.com (dialup-ras6-132.pdx.or.uspops.net [216.239.177.132]) (authenticated bits=0) by x11.quik.com (8.12.9-20030926/8.12.5) with ESMTP id hAAHGIee012728 for ; Mon, 10 Nov 2003 09:16:19 -0800 Message-ID: <3FAF1E47.4060409@quik.com> Date: Sun, 09 Nov 2003 21:12:39 -0800 From: james User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.1) Gecko/20020826 X-Accept-Language: en-us, en MIME-Version: 1.0 To: questions@freebsd.org References: <3FAE2E06.40608@quik.com> <44oevkp6b3.fsf@be-well.ilk.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: where do you find X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 17:16:22 -0000 Lowell Gilbert wrote: >james writes: > > > >>the topics that are posted on the e mail >> >> > >I don't understand the question. > > > > well the mailing list sends a list of topics but thats all it is just the titles so how do you get to look at the problem and salution of the title in the list From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 09:21:43 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EABDB16A4CF for ; Mon, 10 Nov 2003 09:21:42 -0800 (PST) Received: from endif.cjb.net (65-101-229-205.dnvr.qwest.net [65.101.229.205]) by mx1.FreeBSD.org (Postfix) with SMTP id 4156B43F93 for ; Mon, 10 Nov 2003 09:21:41 -0800 (PST) (envelope-from end@endif.cjb.net) Received: (qmail 65850 invoked from network); 10 Nov 2003 17:21:37 -0000 Received: from localhost (end@127.0.0.1) by localhost with SMTP; 10 Nov 2003 17:21:37 -0000 Date: Mon, 10 Nov 2003 10:21:34 -0700 From: Robin Schoonover To: "Karel J. Bosschaart" Message-Id: <20031110102134.13db5376.end@endif.cjb.net> In-Reply-To: <20031110091130.GA11620@phys9911.phys.tue.nl> References: <20031109145538.0aa4ce3d.end@endif.cjb.net> <20031110091130.GA11620@phys9911.phys.tue.nl> X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 17:21:43 -0000 On Mon, 10 Nov 2003 10:11:30 +0100, "Karel J. Bosschaart" wrote: > On Sun, Nov 09, 2003 at 10:55:38PM +0100, Robin Schoonover wrote: > > > > On a slightly related note, I've been trying to run some of the linux > > loki demos under FreeBSD. All work (plus heretic II, which has > > software rendering), except the ones labeled "3d Acceleration". The > > ones labeled "3d Acceleration" tend to crash X. > > > > One thing I've noticed is when X is started it displays: > > (EE) NVIDIA(0): Failed to load GLX > > > > It appears to be finding the GLX stuff, but when it tries to load it, > > it can't. If it helps any, I have a 'GeForce4 MX 440 with AGP8X'. > > > Games are running fine for me with the Nvidia driver and a GeForce4 > Ti4200, on a -stable system. Below is a list I made some time ago with > the games I can run successfully, with some notes. 'pcm' denotes the > native FreeBSD sound driver, 'OSS' the (commercial) driver by Opensound. > I have plans to make a website with this info as well as install notes > and a forum for asking questions; I don't know though if there is a lot > of need for this. Some time ago, the forum at swissgeeks closed down soon > due to lack of interest. Personally, I'd like some chit-chat about gaming > on FreeBSD :-). > I haven't been much of a gamer since a virus wiped the windows box I was using a couple years ago, and that kinda turned me away from windows. Then I used FreeBSD on an old (formerly dos) machine, and there wasn't really any hard drive space for anything, including games. Now that I have a reasonably new computer (running FreeBSD of course), I decided to try a few games. It didn't take me long to find the loki demo stuff. > > 2003-09-09 Linux games on FreeBSD > > Hardware: Athlon 1.4 GHz, Asus A7M266, 512 MB RAM, GeForce4 Ti 4200 > 128MB, onboa rd sound CMI8738. > OS : FreeBSD 4.x (currently 4.9-PRERELEASE) Here is where we are really different. I'm running 5.1 (and this means I won't be saddened if things don't work, since I knew things like this might happened when I installed it). I have an Athlon 2 GHz, 512 MB ram, GeForce4 MX 440 with AGP8X, and for sound, I have 'CMI9739'. [snip list] Nice list of games...I should look into a few of those. And just because, here is my list (even ones that don't work): Game Works Sound Remarks Descent 3 (demo) no (crashes X) Heretic II (demo) yes ew Must use software rendering Heros of M and M III (demo) yes yes Kohan: IS (demo) yes yes Myth II: Soulblighter (demo) no (crashes) Railroad Tychoon II (demo) yes yes Simcity 3000 unlimited (demo) no (crashes) SM's Alpha Centauri (demo) yes ? SM's Alien Crossfire (demo) no UT2003 (demo) no I should try playing this again Soldier of Fortune (deno) no (crashes) Bizarre, Alien Crossfire seems to have written over Alpha Centauri, so I can't really test the sound for Alpha Centauri until I deinstall Alien Crossfire and reinstall Alpha Centauri. Soldier of Fortune, Myth II: Soulblighter and Descent 3 all require 3d accel... -- Robin Schoonover (aka End) # This space intentionally has nothing but text explaining why this # space has nothing but text explaining that this space would otherwise # have been left blank, and would otherwise have been left blank. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 09:30:28 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 90D1A16A4CE for ; Mon, 10 Nov 2003 09:30:28 -0800 (PST) Received: from lakemtao06.cox.net (lakemtao06.cox.net [68.1.17.115]) by mx1.FreeBSD.org (Postfix) with ESMTP id 750C043F93 for ; Mon, 10 Nov 2003 09:30:27 -0800 (PST) (envelope-from kitbsdlists@HotPOP.com) Received: from fortytwo ([68.109.49.234]) by lakemtao06.cox.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031110173026.PPJA24575.lakemtao06.cox.net@fortytwo>; Mon, 10 Nov 2003 12:30:26 -0500 Date: Mon, 10 Nov 2003 11:29:14 -0600 From: Vulpes Velox To: LM Message-Id: <20031110112914.0be8aa22.kitbsdlists@HotPOP.com> In-Reply-To: References: X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd4.9) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: XFree86 difficulties X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 17:30:28 -0000 On Mon, 10 Nov 2003 10:38:29 -0500 (EST) LM wrote: > I'm trying to figure out if I can get X running on my system and could use > some help. > > I have an ATI All-in-Wonder 128, AGP card with 32MB. I also recently > purchased a Sony SDM-X72 TFT LCD Color Monitor with specs of: > Horizontol Freq: 28-92kHz > Vertical Freq:56-85Hz > Max Resolution: 1280x1024 > > I tried configuring XFree86 through /stand/sysinstall. Found suggestions > in the Usenet Newsgroups to set the card as ATI Rage 128 (generic). I > tried that setting along with the various default screen types (VGA, Super > VGa, Extended Super VGA, etc.). When I try startx, the screen displays > the message that I'm out of scan range and displays frequencies > 35.5Khz-87Hz. Does anyone know if I can get X Windows running with my > current hardware? Any suggestions on setup? > > I guess I should also mention, I installed FreeBSD from a CD with > release version 4.3. Wanted to get some idea of how it would work with my > current system, before I go out and buy CDs for version 4.9. It would be useful it you would post the config file... but it sounds like you may have the refresh rates set up improperly. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 09:35:10 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AC42D16A4CE for ; Mon, 10 Nov 2003 09:35:10 -0800 (PST) Received: from nic.fnni.com (nic.fnni.com [204.58.233.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id 68C7C43FAF for ; Mon, 10 Nov 2003 09:35:07 -0800 (PST) (envelope-from bchirhart@fnni.com) X-Server-Uuid: b40b4260-68f5-11d4-98ee-00508bdcae1a Message-ID: <200311101735.hAAEsKSk009294@nic.fnni.com> From: "Chirhart, Brian" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 11:35:00 -0600 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) X-WSS-ID: 13B113AA87735-01-01 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: Mount SMB share on bootup X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 17:35:10 -0000 I am only 1 month along in my FreeBSD knowledge, so please forgive any wrong verbage or simple questions. In that month, I have set up a pretty sweet server that is running SSH, apache 2.x and ProFTPD. So I have gotten along pretty well. My question is my FTP server is hosting files off of a WinXP box via an SMB mount point. But every time I reboot the box (which is often since I don't know what I am doing) I have to type my mount command again. Is there a way I can mount that automatically upon startup? Also, the mount point is password protected (on the XP side) so I am prompted for a password. How can I automate that? Or should I create the share without a password? I am not too worried about internal security so the share could have no password and that would be fine. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 09:38:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9597716A4CE for ; Mon, 10 Nov 2003 09:38:13 -0800 (PST) Received: from nutt.ca (nutt.ca [65.39.196.154]) by mx1.FreeBSD.org (Postfix) with SMTP id 9E32E43FA3 for ; Mon, 10 Nov 2003 09:38:12 -0800 (PST) (envelope-from gregory@nutt.ca) Received: (qmail 17602 invoked from network); 10 Nov 2003 17:38:11 -0000 Received: from unknown (HELO to-gnutt-ops.nutt.ca) (66.100.21.241) by nutt.ca with SMTP; 10 Nov 2003 17:38:11 -0000 Message-Id: <6.0.0.22.0.20031110123252.02428258@mail.nutt.ca> X-Sender: gregory@mail.nutt.ca X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Mon, 10 Nov 2003 12:38:06 -0500 To: freebsd-questions@FreeBSD.org From: Gregory Nutt Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Subject: Writing Device Drivers in 5.1-RELEASE X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 17:38:13 -0000 I'm trying to port the device driver for acx100 chipsets TO WORK ON FreeBSD. However, all the guides I'm finding make reference to files that apparently are no longer used such as: card_if.h device_if.h bus_if.h etc... and have been renamed to card_if.m, device_if.m, bus_if.m, etc... even though these are includes in a good number of the device driver files included with this distro. So far I just remmed out the includes of these files and am now stuck at the DEVMETHOD macro where it is not accepting functions such as device_probe, device_attach, device_detach, etc where I get an error saying ei. device_probe_desc undeclared here (not in a function). I can find no headers that define the macro or the functions. Please help! Greg From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 09:56:04 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3765616A4CE for ; Mon, 10 Nov 2003 09:56:04 -0800 (PST) Received: from deimos.frii.net (deimos.frii.net [216.17.128.193]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5821F43FAF for ; Mon, 10 Nov 2003 09:56:03 -0800 (PST) (envelope-from aaron@justaaron.com) Received: from justaaron.com (dsc02-ari-co-204-32-195-122.rasserver.net [204.32.195.122]) by deimos.frii.net (8.12.10/8.12.10) with ESMTP id hAAHtt0E022994; Mon, 10 Nov 2003 10:55:59 -0700 (MST) Message-ID: <3FAFD122.8030609@justaaron.com> Date: Mon, 10 Nov 2003 10:55:46 -0700 From: Aaron User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031029 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Matthew Seaman References: <3FAEF4AD.2050809@justaaron.com> <20031110083421.GA8828@happy-idiot-talk.infracaninophile.co.uk> In-Reply-To: <20031110083421.GA8828@happy-idiot-talk.infracaninophile.co.uk> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Can't /.../rc.d/slapd.sh start X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: aaron@justaaron.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 17:56:04 -0000 Matthew Seaman wrote: > On Sun, Nov 09, 2003 at 07:15:09PM -0700, Aaron wrote: > >>Hmmm, I just noticed this in the debug output from slapd.sh >> >>+ /usr/local/libexec/slapd -u ldap -g ldap >>+ _return=1 >>+ [ 1 -ne 0 ] >>+ [ -z ] >> >>I tried running slapd as above from the command line and failed. > > > slapd should have logged the reason why it didn't start up -- check > /var/log/console.log, /var/log/all.log and /var/log/messages > > If the log message doesn't clarify things, turn up the log level in > /usr/local/etc/openldap/slapd.conf (see slapd.conf(5)). Ahhh... bash-2.05b$ sockstat -4 ... ldap slapd 180 8 tcp4 *:389 *:* ... This after following Dr. M's suggestion and looking in all.log (cough after turning it on cough cough). Which showed this: Nov 10 10:09:06 haiku slapd[289]: bdb_initialize: Sleepycat Software: Berkeley DB 4.1.25: (December 19, 2002) Nov 10 10:09:06 haiku slapd[289]: could not open config file "/usr/local/etc/openldap/schema/core.schema": Permission denied (13) Nov 10 10:09:06 haiku slapd[289]: slapd shutdown: freeing system resources. Nov 10 10:09:06 haiku slapd[289]: slapd stopped. Nov 10 10:09:06 haiku slapd[289]: connections_destroy: nothing to destroy. Permission denied for core.schema? Changed ownership and group for all schema files: # chown ldap:ldap openldap/schema/*.schema Which didn't change things. Changed ownership and group for the directory holding the schema files: # chown ldap:ldap openldap/schema Which did the trick. Nov 10 10:33:09 haiku slapd[179]: bdb_initialize: Sleepycat Software: Berkeley DB 4.1.25: (December 19, 2002) Nov 10 10:33:09 haiku slapd[179]: line 21 (allow bind_v2) Nov 10 10:33:09 haiku slapd[179]: line 61 (database bdb) Nov 10 10:33:09 haiku slapd[179]: bdb_db_init: Initializing BDB database Nov 10 10:33:09 haiku slapd[179]: line 64 (suffix "dc=krelm, dc=com") Nov 10 10:33:09 haiku slapd[179]: line 65 (rootdn "dc=krelm, dc=com") Nov 10 10:33:09 haiku slapd[179]: line 69 (rootpw ***) Nov 10 10:33:09 haiku slapd[179]: line 73 (directory /var/db/openldap-data) Nov 10 10:33:09 haiku slapd[179]: line 75 (index objectClass eq) Nov 10 10:33:09 haiku slapd[179]: index objectClass 0x0004 Nov 10 10:33:10 haiku slapd[180]: slapd starting Nov 10 10:33:10 haiku slapd[180]: daemon: added 8r Nov 10 10:33:10 haiku slapd[180]: daemon: select: listen=8 active_threads=0 tvp=NULL It's strange that the port would install rc.d/slapd.sh to call slapd with -u ldap -g ldap, yet not set the permissions on these schema files and directories accordingly. Anyway, thanks Dr. M. -- Aaron aaron@justaaron.com From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 10:02:49 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0417C16A4CE for ; Mon, 10 Nov 2003 10:02:49 -0800 (PST) Received: from luftpost.plosh.net (luftpost.plosh.net [204.152.186.181]) by mx1.FreeBSD.org (Postfix) with ESMTP id C73AA43F85 for ; Mon, 10 Nov 2003 10:02:47 -0800 (PST) (envelope-from plosher-keyword-freebsd.a36e57@plosh.net) Received: by luftpost.plosh.net (Postfix, from userid 1001) id DAA2D32606; Mon, 10 Nov 2003 10:02:49 -0800 (PST) Received: from dhcp-2.sql1.plosh.net (tardis-nat.plosh.net [64.139.14.228]) by luftpost.plosh.net (tmda-ofmipd) with ESMTP; Mon, 10 Nov 2003 10:02:48 -0800 (PST) Organization: Plosh Networking To: questions@freebsd.org, hardware@freebsd.org Date: Mon, 10 Nov 2003 10:02:41 -0800 User-Agent: KMail/1.5.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311101002.41697.plosher@plosh.net> From: Peter Losher X-Delivery-Agent: TMDA/0.87 (Carry Back) Subject: Rocketport (rp0) mapping failure on 5.1-REL X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 18:02:49 -0000 I am installing a RocketPort PCI card into a Acer Altos system; the box was originally running Linux, slapping on FreeBSD 5.1 on the box, the system throws up this error when trying to attach the RP card: -=- rp0: port 0x5400-0x54ff,0x5000-0x507f mem 0xed8ffc00-0xed8ffc7f irq 11 at device 2.0 on pci1 rp0: ioaddr mapping failed for RocketPort(PCI). device_probe_and_attach: rp0 attach returned 6 -=- Has anyone ever seen such an error, and if so, how did you get around it? (I haven't been able to find anything via Google) From what I have been told, the card came up cleanly when the box was running Linux. Best Wishes - Peter -- [ http://www.plosh.net/ ] - "Resident Kalifornian" From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 10:03:53 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6E84816A4CE for ; Mon, 10 Nov 2003 10:03:53 -0800 (PST) Received: from w2xo.jcdurham.com (18.gibs5.xdsl.nauticom.net [209.195.184.19]) by mx1.FreeBSD.org (Postfix) with ESMTP id 56BB843FB1 for ; Mon, 10 Nov 2003 10:03:52 -0800 (PST) (envelope-from durham@jcdurham.com) Received: from jimslaptop.pitt.nepinc.com (pgh.nepinc.com [66.207.129.50]) by w2xo.jcdurham.com (8.11.6/8.11.6) with ESMTP id hAAI3mx86775; Mon, 10 Nov 2003 13:03:49 -0500 (EST) (envelope-from durham@jcdurham.com) From: Jim Durham Organization: JC Durham Consulting To: Lewis Thompson , FreeBSD-questions Date: Mon, 10 Nov 2003 13:03:46 -0500 User-Agent: KMail/1.5.3 References: <20031107142750.GA833@lewiz.org> In-Reply-To: <20031107142750.GA833@lewiz.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311101303.46956.durham@jcdurham.com> Subject: Re: sftp mount? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: durham@jcdurham.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 18:03:53 -0000 On Friday 07 November 2003 09:27 am, Lewis Thompson wrote: > Hi, > > I'm wondering if there might be any way to mount an sftp > ``filesystem''? At my university everything is firewalled and the > only way I can transfer files to/from my account is to use sftp -- > but that gets quite painful after a while. > > I was wondering if anybody knew a way I might achieve what could > essentially be described as mounting an sftp ``export''? Maybe I > could specify an argument that sets the logical root? > > So: > > mount_sftp --root=/home/lewiz foo.bar.com /remote_home > > would provide /home/lewiz on foo.bar.com at /remote_host? Is this > possible in any way at all? Or can anybody suggest any other way I > might achieve something similar? Bear in mind I am actually > restricted to sftp/ssh. Sorry, I didn't see this sooner... I don't know if this is exactly what you want, but you can do this in KDE using the fish:// protocol, which is basically file sharing over ssh. You bring up the konqueror browser and do fish://username@hostname and it should pop open a GUI representation of your home directory on the server "hostname". When you click on an editable file it will run an editor and it really downloads the file, edits it, then when you go to save it says something like "This file is on a remote host, do you want to upload it?" and you just click yes. I haven't tried this will all different kinds of editors. The editors that come with the KDE desktop all work with this, but not sure about vi or emacs. So, it's not exactly what you had in mind, but it works for me. -- -Jim From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 10:39:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2F51D16A4CE for ; Mon, 10 Nov 2003 10:39:16 -0800 (PST) Received: from ispn05.iowatelecom.net (ispn05.iowatelecom.net [207.177.40.105]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4F6F543FAF for ; Mon, 10 Nov 2003 10:39:15 -0800 (PST) (envelope-from sharper@iowatelecom.net) Received: from iowatelecom.net (imas-grnl-00-1450.dsl.iowatelecom.net [69.66.125.170]) by ispn05.iowatelecom.net (8.12.9/8.11.6) with SMTP id hAAIkb2O016458 for ; Mon, 10 Nov 2003 12:46:37 -0600 Message-ID: <3FAFDA0F.5040705@iowatelecom.net> Date: Mon, 10 Nov 2003 12:33:51 -0600 From: Stephen Harper User-Agent: Mozilla/5.0 (Macintosh; U; PPC; en-US; rv:1.0.2) Gecko/20030208 Netscape/7.02 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Is there a J2SE implementation for NetBSD? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 18:39:16 -0000 I am looking for in omplmentation of J2SE for Net BSD. Does anyone know if it exists? Stephen Harper sharper@iowatelecom.net From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 10:42:06 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6C09816A4CE for ; Mon, 10 Nov 2003 10:42:06 -0800 (PST) Received: from wsmailap02.firstam.com (outbound-smtp02.firstam.com [208.246.101.198]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8F62A43FBF for ; Mon, 10 Nov 2003 10:42:05 -0800 (PST) (envelope-from jpwatkins@firstam.com) Received: from 172.21.131.5 by wsmailap02.firstam.com with ESMTP ( Tumbleweed MMS SMTP Relay (MMS v5.6.0)); Mon, 10 Nov 2003 10:41:53 -0800 X-Server-Uuid: DEC23BA8-81D5-401D-BB76-421BE53A6BE4 Received: from powaymail.Credco.firstam.com ( mailhost1.credco.firstam.com [172.22.64.10]) by famarp01.firstam.com ( Mirapoint Messaging Server MOS 3.3.7-GR) with ESMTP id DAH70389; Mon, 10 Nov 2003 10:41:49 -0800 (PST) Received: by powaymail.credco.firstam.com with Internet Mail Service ( 5.5.2653.19) id <4SSYJMQY>; Mon, 10 Nov 2003 10:41:10 -0800 Message-ID: <6F81085EAE16DD48A4E492D9D44185410282D01E@pdxmail.credit.credco.net> From: "Watkins, Jason" To: "'freebsd-questions@freebsd.org'" Date: Mon, 10 Nov 2003 10:41:39 -0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) X-WSS-ID: 13B1047A108550022-05-01 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Subject: at my wit's end on buildworld X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 18:42:06 -0000 Ohh, well don't I feel silly now :). Thanks... ohh, one remaining question: whats the best way to save myself a debug kernel so I have something to run a dump against if I get a panic again? Where does make buildkernel output the kernel file? Jason Watkins RELS Reporting 877-264-9096x5887 "MMS " made the following annotations on 11/10/2003 10:42:02 AM ------------------------------------------------------------------------------ "THIS E-MAIL MESSAGE AND ANY FILES TRANSMITTED HEREWITH, ARE INTENDED SOLELY FOR THE USE OF THE INDIVIDUAL(S) ADDRESSED AND MAY CONTAIN CONFIDENTIAL, PROPRIETARY OR PRIVILEGED INFORMATION. IF YOU ARE NOT THE ADDRESSEE INDICATED IN THIS MESSAGE (OR RESPONSIBLE FOR DELIVERY OF THIS MESSAGE TO SUCH PERSON) YOU MAY NOT REVIEW, USE, DISCLOSE OR DISTRIBUTE THIS MESSAGE OR ANY FILES TRANSMITTED HEREWITH. IF YOU RECEIVE THIS MESSAGE IN ERROR, PLEASE CONTACT THE SENDER BY REPLY E-MAIL AND DELETE THIS MESSAGE AND ALL COPIES OF IT FROM YOUR SYSTEM." ============================================================================== From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 10:50:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C0FBD16A4D0 for ; Mon, 10 Nov 2003 10:50:38 -0800 (PST) Received: from lily.ezo.net (nsc.ezo.net [68.23.200.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id D4B7C43F75 for ; Mon, 10 Nov 2003 10:50:37 -0800 (PST) (envelope-from jflowers@ezo.net) Received: from www.ezo.net (peony.ezo.net [68.23.200.11]) by lily.ezo.net (8.12.6/8.12.6) with ESMTP id hAAIofTv018717 for ; Mon, 10 Nov 2003 13:50:41 -0500 (EST) (envelope-from jflowers@ezo.net) From: "Jim Flowers" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 13:51:11 -0500 Message-Id: <20031110184801.M88990@ezo.net> X-Mailer: Open WebMail 2.10 20031002 X-OriginatingIP: 24.93.231.122 (jflowers) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Subject: php4-cli with mod_php4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 18:50:38 -0000 I would like to have a cli php as well as mod_php4 with apache2. I installed php4-cli but then had to deinstall it when mod_php4 complained about it using the same install locations. It seems like maybe use a different prefix (/usr/local/php4?) but I don't know. Is there a correct way to do this? Thanks -- Jim Flowers From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 10:58:53 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4B2BD16A4CE for ; Mon, 10 Nov 2003 10:58:53 -0800 (PST) Received: from ns1.tiadon.com (SMTP.tiadon.com [69.27.132.161]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1DD9143FE1 for ; Mon, 10 Nov 2003 10:58:52 -0800 (PST) (envelope-from kdk@daleco.biz) Received: from daleco.biz ([69.27.131.0]) by ns1.tiadon.com with Microsoft SMTPSVC(6.0.3790.0); Mon, 10 Nov 2003 13:01:37 -0600 Message-ID: <3FAFDFC9.3060202@daleco.biz> Date: Mon, 10 Nov 2003 12:58:17 -0600 From: "Kevin D. Kinsey, DaleCo, S.P." User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.4) Gecko/20030920 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Jim Flowers References: <20031110184801.M88990@ezo.net> In-Reply-To: <20031110184801.M88990@ezo.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 10 Nov 2003 19:01:38.0343 (UTC) FILETIME=[11A8AB70:01C3A7BD] cc: freebsd-questions@freebsd.org Subject: Re: php4-cli with mod_php4 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 18:58:53 -0000 Jim Flowers wrote: >I would like to have a cli php as well as mod_php4 with apache2. I installed >php4-cli but then had to deinstall it when mod_php4 complained about it using >the same install locations. > >It seems like maybe use a different prefix (/usr/local/php4?) but I don't >know. Is there a correct way to do this? > >Thanks > >-- >Jim Flowers > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > > > If it's not too much of an issue, a better idea *might* be to just install a complete PHP environment (i.e. /usr/ports/lang/php4). I've done that several times w/o any issues, and enjoy the use of the Apache Mod and the CLI regularly ;-) Kevin Kinsey DaleCo, S.P. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 11:01:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D23A516A4CE for ; Mon, 10 Nov 2003 11:01:22 -0800 (PST) Received: from phys9911.phys.tue.nl (PHYS9911.phys.tue.nl [131.155.116.116]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1B35F43FEA for ; Mon, 10 Nov 2003 11:01:17 -0800 (PST) (envelope-from karelj@phys9911.phys.tue.nl) Received: from phys9911.phys.tue.nl (localhost [127.0.0.1]) hAAJ10ct049155; Mon, 10 Nov 2003 20:01:00 +0100 (CET) (envelope-from karelj@phys9911.phys.tue.nl) Received: (from karelj@localhost) by phys9911.phys.tue.nl (8.12.10/8.12.10/Submit) id hAAJ0uru049154; Mon, 10 Nov 2003 20:00:56 +0100 (CET) (envelope-from karelj) Date: Mon, 10 Nov 2003 20:00:56 +0100 From: "Karel J. Bosschaart" To: Robin Schoonover Message-ID: <20031110190056.GA48992@phys9911.phys.tue.nl> References: <20031109145538.0aa4ce3d.end@endif.cjb.net> <20031110091130.GA11620@phys9911.phys.tue.nl> <20031110102134.13db5376.end@endif.cjb.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031110102134.13db5376.end@endif.cjb.net> User-Agent: Mutt/1.4.1i cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 19:01:22 -0000 On Mon, Nov 10, 2003 at 10:21:34AM -0700, Robin Schoonover wrote: > On Mon, 10 Nov 2003 10:11:30 +0100, "Karel J. Bosschaart" > wrote: > > On Sun, Nov 09, 2003 at 10:55:38PM +0100, Robin Schoonover wrote: > > > > > > On a slightly related note, I've been trying to run some of the linux > > > loki demos under FreeBSD. All work (plus heretic II, which has > > > software rendering), except the ones labeled "3d Acceleration". The > > > ones labeled "3d Acceleration" tend to crash X. > > > > > > One thing I've noticed is when X is started it displays: > > > (EE) NVIDIA(0): Failed to load GLX This is a serious problem that should be fixed if you want to use 3d-acceleration. My log (on 5.1-current) shows (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.4365 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "nvidia" > > > It appears to be finding the GLX stuff, but when it tries to load it, > > > it can't. If it helps any, I have a 'GeForce4 MX 440 with AGP8X'. Sorry, I don't know why it is not loading :-(. If you have the line 'Load "dri"' in your XF86Config, comment it out. It is not needed and might cause trouble. I suppose you have the kernel module nvidia.ko loaded? You can test direct rendering by typing 'glxinfo'. It should show (among a lot of other stuff): direct rendering: Yes. To see the performance, try 'glxgears'. My machine is doing ~3900 FPS on -stable (using nvidia agp), ~2800 FPS on -current (using FreeBSD agp, nvidia agp does not work on this machine under -current). I guess the debugging stuff in -current might cause some slowdown. Also getting lot of stuff on the console like this: exclusive sleep mutex dev.mtx_api r = 0 (0xc4abb98c) locked @ /usr/ports/x11/nvidia-driver/work/NVIDIA-FreeBSD-x86-1.0-4365/src/nvidia_subr.c:753 > I haven't been much of a gamer since a virus wiped the windows box I was > using a couple years ago, and that kinda turned me away from windows. Then > I used FreeBSD on an old (formerly dos) machine, and there wasn't really > any hard drive space for anything, including games. > > Now that I have a reasonably new computer (running FreeBSD of course), I > decided to try a few games. It didn't take me long to find the loki demo > stuff. > Have a look at http://www.icculus.org . It's the most extensive list of Linux games I know off, including useful links. > > Hardware: Athlon 1.4 GHz, Asus A7M266, 512 MB RAM, GeForce4 Ti 4200 > > 128MB, onboa rd sound CMI8738. > > OS : FreeBSD 4.x (currently 4.9-PRERELEASE) > > Here is where we are really different. I'm running 5.1 (and this means I > won't be saddened if things don't work, since I knew things like this might > happened when I installed it). I have an Athlon 2 GHz, 512 MB ram, > GeForce4 MX 440 with AGP8X, and for sound, I have 'CMI9739'. > Once you succeed in running direct rendering, I expect games will also run in -current. I have a dual-boot setup with -stable and -current and shared my games partition. I didn't try them all in -current, but I succeeded running Quake3 and UT2003, although UT2003 feels considerably slower than in -stable. I plan to do the same test on -current with all my games installed but don't know when :-/. I don't know what performance one should expect with a MX card, I bought a Ti version since these are faster for gaming. > [snip list] > > Bizarre, Alien Crossfire seems to have written over Alpha Centauri, so I > can't really test the sound for Alpha Centauri until I deinstall Alien > Crossfire and reinstall Alpha Centauri. Soldier of Fortune, Myth II: > Soulblighter and Descent 3 all require 3d accel... > Reason I included sound info is that for a long time there were these sound lags which I worked around by purchasing OSS. However, OSS does not work for mmap'ed sound (Quake3 and all derivatives such as ET) so I ended up switching between the two. Currently, only two of the games (Rune and SoF) require OSS, so I'm mostly running pcm again. For the records, mmap'ed sound was also broken in FreeBSD for quite a while, around 4.2 IIRC. Generally, I'm happy with gaming performance in FreeBSD but I'm more of an occasional gamer than hardcore, and consider it a nice challenge to run them on FreeBSD ;-). It *does* add quite some instability, unfortunately, due to the beta-nature of the nvidia-drivers, but my experience is that once a game is started up it rarely crashes. I haven't checked out DRI for a long time (since replacing my Matrox G400 by Geforce4 about one year ago). Don't forget to check out the nvidia-driver FAQ: http://www.soulwax.net/nvidia/faq.shtml Hm, Can't find info about __GL_SINGLE_THREADED=1 there (maybe overlooking), but anyway you need to set it for most (if not all) Linux games to run succesfully. Good luck, Karel. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 11:07:34 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B10A916A4CE for ; Mon, 10 Nov 2003 11:07:34 -0800 (PST) Received: from gaff.hhhr.ision.net (gaff.hhhr.ision.net [195.180.9.213]) by mx1.FreeBSD.org (Postfix) with ESMTP id 40A8343FF5 for ; Mon, 10 Nov 2003 11:07:32 -0800 (PST) (envelope-from ohoyer@gaff.hhhr.ision.net) Received: from gaff.hhhr.ision.net (localhost [127.0.0.1]) by gaff.hhhr.ision.net (8.12.10/8.12.10) with ESMTP id hAAJ7bVX032022; Mon, 10 Nov 2003 20:07:37 +0100 (CET) (envelope-from ohoyer@gaff.hhhr.ision.net) Received: from localhost (ohoyer@localhost)hAAJ7Z7V032019; Mon, 10 Nov 2003 20:07:37 +0100 (CET) (envelope-from ohoyer@gaff.hhhr.ision.net) Date: Mon, 10 Nov 2003 20:07:35 +0100 (CET) From: Olaf Hoyer To: Guy Silliman In-Reply-To: <3FAFA9BE.20306@silliman.net> Message-ID: <20031110200355.E31965@gaff.hhhr.ision.net> References: <3FAFA9BE.20306@silliman.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII cc: freebsd-questions@freebsd.org Subject: Re: Compaq 1850R panics with 5.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 19:07:34 -0000 On Mon, 10 Nov 2003, Guy Silliman wrote: > I am trying to get a Compaq 1850R running. It is a dual PII 400MHz > machine that works fine with Win2k server... but > I would prefer to use fbsd 5.x but I am stumped by this panic at > sysinstall. Hi! Well, the old Compaqs have some quite rough edges, and 5.1R (or do you use a -current snapshot?) is also in some things not that nice... Sometimes you have to set it to NT4-OS Type. > I have searched all the lists and have tried several fixes mentioned > including the "Full table - Mapped" and OS set to Win2k in the BIOS. > I have tried disabling the onboard NIC as a possible source of conflicts > but no luck. > I had in my former company a 1850 running SMP with a 4.8-stable. The onboard SCSI is basically a Symbios one, and it was recognized without hassle. (Ok, it needs the compaq tool partition to do RAID stuff, but... well, broke it during installation) > I would be willing to go with a late 4.x but it does not probe the > onboard SCSI thus I have no drives. > I do have a Smart Array 3200 ordered and coming - this may solve the 4.x > issue, but I am puzzled by the panic with 5.x. > That ist strange indeed, my box (dual PIII-500) went fine. But perhaps there is also a different Mainboard in, with some undocumented change in the series. HTH Olaf -- Olaf Hoyer ohoyer@gaff.hhhr.ision.net Fuerchterliche Erlebniss geben zu raten, ob der, welcher sie erlebt, nicht etwas Fuerchterliches ist. (Nietzsche, Jenseits von Gut und Boese) From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 11:14:55 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 284B916A4CF for ; Mon, 10 Nov 2003 11:14:55 -0800 (PST) Received: from aibo.runbox.com (aibo.runbox.com [193.71.199.94]) by mx1.FreeBSD.org (Postfix) with ESMTP id B0BA643FE3 for ; Mon, 10 Nov 2003 11:14:53 -0800 (PST) (envelope-from klimenta@futurebit.com) Received: from [10.9.9.11] (helo=fifi.runbox.com) by lufsen.runbox.com with esmtp (Exim 4.24) id 1AJHUy-00026a-3B for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 20:14:52 +0100 Received: from [12.33.76.83] (helo=srce) (Authenticated Sender=klimenta@runbox.com) by fifi.runbox.com with asmtp (Exim 4.24) id 1AJHUZ-0006lk-QK for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 20:14:28 +0100 Message-ID: <000e01c3a7be$f1419de0$ca0112ac@vinyl.tkvbp.com> From: "Kliment Andreev" To: References: <200311101735.hAAEsKSk009294@nic.fnni.com> Date: Mon, 10 Nov 2003 13:14:53 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 X-Sender: 202020 Subject: Re: Mount SMB share on bootup X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 19:14:55 -0000 > point is password protected (on the XP side) so I am prompted for a > password. How can I automate that? Or should I create the share without a > password? I am not too worried about internal security so the share could > have no password and that would be fine. Create a script called whatever.sh, chmod +x 755 whatever.sh and put that script in a /usr/local/etc/rc.d. Put the following lines in that script #!/bin/sh smbmount username=user password=pass and the rest of the parametars that you are normaly using when mounting smb partition. Mind that if your startup script for samba is samba.sh your mounting script must start with a letter after the letter s otherwise you would mounting a samba share without smb daemon started. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 11:16:55 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C281116A4CE for ; Mon, 10 Nov 2003 11:16:55 -0800 (PST) Received: from ztxmail04.ztx.compaq.com (ztxmail04.ztx.compaq.com [161.114.1.208]) by mx1.FreeBSD.org (Postfix) with ESMTP id C4BA043FDD for ; Mon, 10 Nov 2003 11:16:54 -0800 (PST) (envelope-from laurie.tucker@hp.com) Received: from cceexg11.americas.cpqcorp.net (cceexg11.americas.cpqcorp.net [16.110.250.125]) by ztxmail04.ztx.compaq.com (Postfix) with ESMTP id 4FC5DBD19 for ; Mon, 10 Nov 2003 13:16:54 -0600 (CST) Received: from cceexc23.americas.cpqcorp.net ([16.110.250.106]) by cceexg11.americas.cpqcorp.net with Microsoft SMTPSVC(6.0.3790.0); Mon, 10 Nov 2003 13:16:53 -0600 X-MimeOLE: Produced By Microsoft Exchange V6.0.6375.0 content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Date: Mon, 10 Nov 2003 13:16:53 -0600 Message-ID: <1903E2FB81A1F4479061D5291A58803803DD07F4@cceexc23.americas.cpqcorp.net> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: CVSweb Problem with Netscape Server Thread-Index: AcOnvy1cvg2t48mAQAe9fU4W8Sm4Ng== From: "Tucker, Laurie" To: X-OriginalArrivalTime: 10 Nov 2003 19:16:54.0093 (UTC) FILETIME=[337D07D0:01C3A7BF] Subject: CVSweb Problem with Netscape Server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 19:16:55 -0000 OK -- I have installed CVSWeb on HPUX using a netscape server. After removing the -wt from cvsweb.cgi I am able to view the initial page.=20 =20 Now I am getting=20 NOTE: There are 104 files, but none matches the current tag ().=20 What can I do to fix this? Thanks LT From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 11:29:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E464F16A4CE for ; Mon, 10 Nov 2003 11:29:16 -0800 (PST) Received: from endif.cjb.net (65-101-229-205.dnvr.qwest.net [65.101.229.205]) by mx1.FreeBSD.org (Postfix) with SMTP id 7EB8143FA3 for ; Mon, 10 Nov 2003 11:29:15 -0800 (PST) (envelope-from end@endif.cjb.net) Received: (qmail 67480 invoked from network); 10 Nov 2003 19:29:30 -0000 Received: from localhost (end@127.0.0.1) by localhost with SMTP; 10 Nov 2003 19:29:30 -0000 Date: Mon, 10 Nov 2003 12:29:30 -0700 From: Robin Schoonover To: "Karel J. Bosschaart" Message-Id: <20031110122930.0e72e2f0.end@endif.cjb.net> In-Reply-To: <20031110190056.GA48992@phys9911.phys.tue.nl> References: <20031109145538.0aa4ce3d.end@endif.cjb.net> <20031110091130.GA11620@phys9911.phys.tue.nl> <20031110102134.13db5376.end@endif.cjb.net> <20031110190056.GA48992@phys9911.phys.tue.nl> X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 19:29:17 -0000 On Mon, 10 Nov 2003 20:00:56 +0100, "Karel J. Bosschaart" wrote: > On Mon, Nov 10, 2003 at 10:21:34AM -0700, Robin Schoonover wrote: > > On Mon, 10 Nov 2003 10:11:30 +0100, "Karel J. Bosschaart" > > wrote: > > > On Sun, Nov 09, 2003 at 10:55:38PM +0100, Robin Schoonover wrote: > > > > > > > > On a slightly related note, I've been trying to run some of the > > > > linux loki demos under FreeBSD. All work (plus heretic II, which > > > > has software rendering), except the ones labeled "3d Acceleration". > > > > The ones labeled "3d Acceleration" tend to crash X. > > > > > > > > One thing I've noticed is when X is started it displays: > > > > (EE) NVIDIA(0): Failed to load GLX > > This is a serious problem that should be fixed if you want to use > 3d-acceleration. My log (on 5.1-current) shows > > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > (II) Module glx: vendor="NVIDIA Corporation" > compiled for 4.0.2, module version = 1.0.4365 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension GLX > (II) LoadModule: "nvidia" > > > > > It appears to be finding the GLX stuff, but when it tries to load > > > > it, it can't. If it helps any, I have a 'GeForce4 MX 440 with > > > > AGP8X'. > > Sorry, I don't know why it is not loading :-(. If you have the line > 'Load "dri"' in your XF86Config, comment it out. It is not needed and > might cause trouble. I suppose you have the kernel module nvidia.ko > loaded? Yes to both. > You can test direct rendering by typing 'glxinfo'. It should show > (among a lot of other stuff): direct rendering: Yes. Nope, so naturally glxgears ran poorly. > Have a look at http://www.icculus.org . It's the most extensive list > of Linux games I know off, including useful links. cool. > > Don't forget to check out the nvidia-driver FAQ: > http://www.soulwax.net/nvidia/faq.shtml > I checked there again...and didn't directly help. So then I tried running tuxracer, which really wants DRI, but can run anyway. No DRI (as we know), but why? The nvidia stuff is installed, ...isn't it? Or maybe it was only partially installed (and some of the opengl libs weren't). That doesn't make sense... So I reinstalled the nvidia-driver from ports, and tried running tuxracer again. Doh! Crashed X. Of course, GLX isn't loaded, so it gets confused, so I'll just have to restart X....and I get this message: (II) [GLX]: Initializing GLX extension Well, that looks promising. Fire up Descent 3 and....Wow. Descent 3 is a lot different from the first one. So much higher resolution... Well, thanks for the help. (although this may be a bad thing..how will I get -anything- real done??) -- Robin Schoonover (aka End) # # The windmills are winning. # From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:01:20 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7828C16A4D5 for ; Mon, 10 Nov 2003 12:01:20 -0800 (PST) Received: from phys9911.phys.tue.nl (PHYS9911.phys.tue.nl [131.155.116.116]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9D8D743FE0 for ; Mon, 10 Nov 2003 12:01:18 -0800 (PST) (envelope-from karelj@phys9911.phys.tue.nl) Received: from phys9911.phys.tue.nl (localhost [127.0.0.1]) hAAK1Oct049469; Mon, 10 Nov 2003 21:01:24 +0100 (CET) (envelope-from karelj@phys9911.phys.tue.nl) Received: (from karelj@localhost) by phys9911.phys.tue.nl (8.12.10/8.12.10/Submit) id hAAK1OSG049468; Mon, 10 Nov 2003 21:01:24 +0100 (CET) (envelope-from karelj) Date: Mon, 10 Nov 2003 21:01:24 +0100 From: "Karel J. Bosschaart" To: Robin Schoonover Message-ID: <20031110200124.GA49425@phys9911.phys.tue.nl> References: <20031109145538.0aa4ce3d.end@endif.cjb.net> <20031110091130.GA11620@phys9911.phys.tue.nl> <20031110102134.13db5376.end@endif.cjb.net> <20031110190056.GA48992@phys9911.phys.tue.nl> <20031110122930.0e72e2f0.end@endif.cjb.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20031110122930.0e72e2f0.end@endif.cjb.net> User-Agent: Mutt/1.4.1i cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:01:20 -0000 On Mon, Nov 10, 2003 at 12:29:30PM -0700, Robin Schoonover wrote: > > Or maybe it was only partially installed (and some of the opengl libs > weren't). That doesn't make sense... So I reinstalled the nvidia-driver > from ports, and tried running tuxracer again. Doh! Crashed X. Of course, > GLX isn't loaded, so it gets confused, so I'll just have to restart > X....and I get this message: > > (II) [GLX]: Initializing GLX extension > > Well, that looks promising. Fire up Descent 3 and....Wow. Descent 3 is a > lot different from the first one. So much higher resolution... > > Well, thanks for the help. (although this may be a bad thing..how will I > get -anything- real done??) > Maybe you did a portupgrade or reinstall of XFree86-Server? This will overwrite some files installed by the nvidia driver. I'm always reinstalling nvidia-driver after upgrading XFree86-Server/libraries just to be sure. It's also necessary to reinstall the nvidia driver after upgrading FreeBSD. I prefer to reboot the machine after any nvidia-driver reinstall to be entirely sure that I have the newest kernel module loaded. Yes, that's ugly, but I got a bit reluctant on kldunload/kldload'ing this sort of critical things. My home desktop doesn't have a large uptime anyway as I'm turning it off if I don't need it. Karel. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:06:14 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 193AC16A4CE for ; Mon, 10 Nov 2003 12:06:14 -0800 (PST) Received: from mail.simrad.no (mail.simrad.no [193.69.73.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id B366943FBF for ; Mon, 10 Nov 2003 12:06:12 -0800 (PST) (envelope-from chip.wiegand@simrad.com) In-Reply-To: <2FBE22C7-112D-11D8-AD24-003065ABFD92@mac.com> To: cswiger@mac.com MIME-Version: 1.0 X-Mailer: Lotus Notes Release 6.5 September 26, 2003 Message-ID: From: chip.wiegand@simrad.com Date: Mon, 10 Nov 2003 12:05:40 -0800 X-MIMETrack: Serialize by Router on S_INET01/S_EXT(Release 6.0.2CF2|July 23, 2003) at 10.11.2003 21:09:13, Serialize complete at 10.11.2003 21:09:13 Content-Type: text/plain; charset="US-ASCII" cc: FreeBSD Questions Subject: Re: Anymore help out there? Re: mail never gets sent X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:06:14 -0000 Charles Swiger wrote on 11/07/2003 06:17:57 AM: > On Nov 6, 2003, at 6:32 PM, chip.wiegand@simrad.com wrote: > > > > Tried that, it just sits on > > > > simradusa# telnet mx4.mail.yahoo.com smtp > > Trying 216.136.129.5... > > > > and never connects. > > OK, so you can be reasonably sure your ISP is blocking port 25. You > will probably need to configure your mail server to relay via your ISPs > SMTP server instead-- change the SMART_HOST definition in > /etc/mail/freebsd.mc and do a "make restart" in /etc/mail, and see > whether that helps... > > -- > -Chuck Thanks Chuck, and the others with the same suggestion. I've set that parameter in the freebsd.mc file and still have the same problem. I ssh'd into my current web server box, running RedHat, and sent a message from the cli mail and watched the messages, and did the same on the FreeBSD box (which will replace the Linux box soon as mail works). Look at the two sections below, notice the lines 250 in each section - they are the reverse of each other. The message sent from the Linux box went through to its destination, but not the message from the FreeBSD box. The Linux box had no configuring done to make it send mail out. I have set up previous versions of FreeBSD, all the way back to 3.0, and have never had to do any configuring to get any to send mail out. It has always just worked, including a previous setup here in this office connected to the same network. So I'm wondering what has changed in 5.1 to cause this problem, if anything. Or is it just a bad install? ---- On the Linux box - ==== [root@simradusa root]# mail -v -s test chip.wiegand@simrad.com just a test from linux. . Cc: chip.wiegand@simrad.com... Connecting to [127.0.0.1] via relay... 220 localhost.localdomain ESMTP Sendmail 8.12.8/8.12.8; Fri, 7 Nov 2003 09:23:56 -0800 >>> EHLO localhost.localdomain 250-localhost.localdomain Hello simradusa [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES ==== Now for the FreeBSD box - ==== simradusa# mail -v -s test freebsd-test@freebsd.org just a test from a new 5.1 box. . EOT freebsd-test@freebsd.org... Connecting to [127.0.0.1] via relay... 220 simradusa.com ESMTP Sendmail 8.12.9/8.12.9; Fri, 7 Nov 2003 09:02:32 -0800 (PST) >>> EHLO simradusa.com 250-simradusa.com Hello localhost.simrad.com [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:11:47 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 84E2516A4CF for ; Mon, 10 Nov 2003 12:11:47 -0800 (PST) Received: from endif.cjb.net (65-101-229-205.dnvr.qwest.net [65.101.229.205]) by mx1.FreeBSD.org (Postfix) with SMTP id 4326843F93 for ; Mon, 10 Nov 2003 12:11:46 -0800 (PST) (envelope-from end@endif.cjb.net) Received: (qmail 67711 invoked from network); 10 Nov 2003 20:12:01 -0000 Received: from localhost (end@127.0.0.1) by localhost with SMTP; 10 Nov 2003 20:12:01 -0000 Date: Mon, 10 Nov 2003 13:12:01 -0700 From: Robin Schoonover To: "Karel J. Bosschaart" Message-Id: <20031110131201.477e1aee.end@endif.cjb.net> In-Reply-To: <20031110200124.GA49425@phys9911.phys.tue.nl> References: <20031109145538.0aa4ce3d.end@endif.cjb.net> <20031110091130.GA11620@phys9911.phys.tue.nl> <20031110102134.13db5376.end@endif.cjb.net> <20031110190056.GA48992@phys9911.phys.tue.nl> <20031110122930.0e72e2f0.end@endif.cjb.net> <20031110200124.GA49425@phys9911.phys.tue.nl> X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:11:47 -0000 On Mon, 10 Nov 2003 21:01:24 +0100, "Karel J. Bosschaart" wrote: > On Mon, Nov 10, 2003 at 12:29:30PM -0700, Robin Schoonover wrote: > > > > Or maybe it was only partially installed (and some of the opengl libs > > weren't). That doesn't make sense... So I reinstalled the > > nvidia-driver from ports, and tried running tuxracer again. Doh! > > Crashed X. Of course, GLX isn't loaded, so it gets confused, so I'll > > just have to restart X....and I get this message: > > > > (II) [GLX]: Initializing GLX extension > > > > Well, that looks promising. Fire up Descent 3 and....Wow. Descent 3 > > is a lot different from the first one. So much higher resolution... > > > > Well, thanks for the help. (although this may be a bad thing..how will > > I get -anything- real done??) > > > Maybe you did a portupgrade or reinstall of XFree86-Server? This will > overwrite some files installed by the nvidia driver. I'm always > reinstalling nvidia-driver after upgrading XFree86-Server/libraries > just to be sure. It's also necessary to reinstall the nvidia driver > after upgrading FreeBSD. I just realized that was exactly what happened. (I already had been remembering to reinstall nvidia-driver after updating FreeBSD, but forgot about XFree86) > I prefer to reboot the machine after any nvidia-driver reinstall to > be entirely sure that I have the newest kernel module loaded. Yes, > that's ugly, but I got a bit reluctant on kldunload/kldload'ing this > sort of critical things. My home desktop doesn't have a large uptime > anyway as I'm turning it off if I don't need it. I know the nvidia driver is the same. I didn't even have this machine before the last update (July). (But it might be a good idea anyway...) -- Robin Schoonover (aka End) # # Instant ice: just add water and freeze. # From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:20:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D170116A4CF for ; Mon, 10 Nov 2003 12:20:45 -0800 (PST) Received: from smtp.infracaninophile.co.uk (happy-idiot-talk.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id 82EA043FA3 for ; Mon, 10 Nov 2003 12:20:41 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAAKK5nx016085 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 10 Nov 2003 20:20:35 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAAKK4Hr016084; Mon, 10 Nov 2003 20:20:04 GMT (envelope-from matthew) Date: Mon, 10 Nov 2003 20:20:04 +0000 From: Matthew Seaman To: Stephen Harper Message-ID: <20031110202004.GB14293@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Stephen Harper , freebsd-questions@freebsd.org References: <3FAFDA0F.5040705@iowatelecom.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="B4IIlcmfBL/1gGOG" Content-Disposition: inline In-Reply-To: <3FAFDA0F.5040705@iowatelecom.net> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=AWL,BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: freebsd-questions@freebsd.org Subject: Re: Is there a J2SE implementation for NetBSD? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:20:46 -0000 --B4IIlcmfBL/1gGOG Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 12:33:51PM -0600, Stephen Harper wrote: > I am looking for in omplmentation of J2SE for Net BSD. Does anyone know= =20 > if it exists? I believe NetBSD uses essentially the same Java ports as FreeBSD does, so your asking this question here is perhaps less futile than it first appears. However, you'll find that asking about NetBSD packages on a NetBSD list will be much more rewarding in the long run. Anyway, the answer is that while there is are several native Java ports for FreeBSD, I can't find equivalents in the official NetBSD pkgsrc. There's this: http://mail-index.netbsd.org/netbsd-java/2003/07/06/0000.html and this: http://mail-index.netbsd.org/netbsd-users/2000/05/02/0001.html Otherwise there are several linux J2SE packages -- this would seem to be the indicated way to get a Java implementation up and running in a reasonable amount of time on NetBSD. If you want to try porting over the FreeBSD stuff: See http://www.freebsdfoundation.org/downloads/java.shtml for some approved versions of JRE 1.3.1 and JDK 1.3.1. These are for IA32 architecture only. You might be able to run them under emulation on NetBSD. Otherwise, there are ports of JDK-1.4.1 available as source, which you will have to compile yourself, after jumping through all of the required hoops to get the source code. The downloading instructions you need to follow are in the port Makefile: http://www.freebsd.org/cgi/cvsweb.cgi/ports/java/jdk14/ As I said, no idea if this will compile correctly on NetBSD, plus (Catch 22) you will need a working JDK-1.4.1 in order to compile JDK-1.4.1 And finally, there is this: ftp://ftp.netbsd.org/pub/NetBSD/packages/pkgsrc/lang/wonka/README.html which I quite honestly had never heard of before I found it on the NetBSD site a few minutes ago and which I have no idea if it's any good or not. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --B4IIlcmfBL/1gGOG Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/r/L0dtESqEQa7a0RAswTAJ0bckcKVZT8CnWUIlpodE5xP1iQNQCfRv5g /akGHo6r7bIJaLrgYubh3Ig= =Ys/n -----END PGP SIGNATURE----- --B4IIlcmfBL/1gGOG-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:21:50 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6B57216A4CE for ; Mon, 10 Nov 2003 12:21:50 -0800 (PST) Received: from nic.fnni.com (nic.fnni.com [204.58.233.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3BD1143F3F for ; Mon, 10 Nov 2003 12:21:47 -0800 (PST) (envelope-from bchirhart@fnni.com) X-Server-Uuid: b40b4260-68f5-11d4-98ee-00508bdcae1a Message-ID: <200311102021.hAAEsKd0009294@nic.fnni.com> From: "Chirhart, Brian" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 14:21:38 -0600 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) X-WSS-ID: 13B12CBA169394-01-01 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: RE: Mount SMB share on bootup X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:21:50 -0000 >> point is password protected (on the XP side) so I am prompted for a >> password. How can I automate that? Or should I create the share without a >> password? I am not too worried about internal security so the share could >> have no password and that would be fine. >Create a script called whatever.sh, chmod +x 755 whatever.sh and put that >script in a /usr/local/etc/rc.d. >Put the following lines in that script >#!/bin/sh >smbmount username=user password=pass and the rest of the parametars that you >are normaly using when mounting smb partition. >Mind that if your startup script for samba is samba.sh your mounting script >must start with a letter after the letter s otherwise you would mounting a >samba share without smb daemon started. ################################ When I try the smbmount I get a "command not Found" I checked the man pages on mount and found mount_smbfs, but I can not find any options that would allow me to specify a username and password. I am not using Samba (at least I didn't load it... may be there by default???) - To map the drive I have a line in my /etc/fstab file that reads: # Device #Mountpoint FSType OPtion //user@server/share /ftproot smbfs rw.nosuto 0 0 Once the server boots, I type "mount /ftproot" and then it asks me for the password for User. After the password is entered, /ftproot contains the contents of the share on my XP system. It was one of the things that I fell in love with about BSD - the ability to "see" XP shares with no special "magic". So anyway - I think there are several different approaches to this. Can I modify my fstab file so that "auto" would work by somehow specifing a password? Or is there a password option that I am missing in the mount or mount_smbfs commands? OR... is there a reason I don't have the smbmount command? Thank you for all your help! From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:26:28 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5B8C116A4CE for ; Mon, 10 Nov 2003 12:26:28 -0800 (PST) Received: from jazz.hq.newdream.net (jazz.hq.newdream.net [66.33.200.141]) by mx1.FreeBSD.org (Postfix) with ESMTP id BEBC043FDD for ; Mon, 10 Nov 2003 12:26:27 -0800 (PST) (envelope-from you@aredumb.com) Received: by jazz.hq.newdream.net (Postfix, from userid 1228) id 389BAAA; Mon, 10 Nov 2003 12:26:23 -0800 (PST) Date: Mon, 10 Nov 2003 12:26:23 -0800 From: Will Yardley To: freebsd-questions@freebsd.org Message-ID: <20031110202623.GA45396@jazz.hq.newdream.net> Mail-Followup-To: Will Yardley , freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.1i Organization: New Dream Network Subject: onboard sound card problems X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:26:28 -0000 Not sure if Mailing.freebsd.questions is still gatewayed here (it's really low traffic now, so I'm thinking not).... if it still is, sorry for the repost. From: Will Yardley Subject: Disabling onboard sound card I have been having some problems since upgrading to 4.9 - earlier I had problems with the onboard sound card, so I switched to a PCI card which worked a lot better. Since the upgrade, FreeBSD makes the onboard card /dev/dsp0 and the PCI card /dev/dsp1. Is there any way to reverse the two devices? Do I just need to specify the device / IRQ in the kernel configuration (and if so, what exactly should I put?) aura% dmesg| grep pcm pcm0: port 0xb800-0xb8ff irq 9 at device 3.0 on pci2 pcm1: mem 0xf1000000-0xf1007fff irq 9 at device 10.0 on pci2 pcm1: Is there a quick hack to disable the onboard sound or switch the two devices? From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:35:00 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C07BA16A4CE for ; Mon, 10 Nov 2003 12:35:00 -0800 (PST) Received: from main.gmane.org (main.gmane.org [80.91.224.249]) by mx1.FreeBSD.org (Postfix) with ESMTP id DD54A43FD7 for ; Mon, 10 Nov 2003 12:34:55 -0800 (PST) (envelope-from freebsd-questions@m.gmane.org) Received: from list by main.gmane.org with local (Exim 3.35 #1 (Debian)) id 1AJIkQ-0000YY-00 for ; Mon, 10 Nov 2003 21:34:54 +0100 X-Injected-Via-Gmane: http://gmane.org/ To: freebsd-questions@freebsd.org Received: from sea.gmane.org ([80.91.224.252]) by main.gmane.org with esmtp (Exim 3.35 #1 (Debian)) id 1AJIkO-0000YO-00 for ; Mon, 10 Nov 2003 21:34:52 +0100 Received: from news by sea.gmane.org with local (Exim 3.35 #1 (Debian)) id 1AJIkO-0001cd-00 for ; Mon, 10 Nov 2003 21:34:52 +0100 From: bremner@unb.ca Date: Mon, 10 Nov 2003 16:34:52 -0400 Lines: 16 Message-ID: <0toevkm07n.wl@nohost.unb.ca> References: <0tu15fanu9.wl@nohost.unb.ca> Mime-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen") Content-Type: text/plain; charset=US-ASCII X-Complaints-To: usenet@sea.gmane.org In-Reply-To: <0tu15fanu9.wl@nohost.unb.ca> Gmane-From: bremner@unb.ca User-Agent: SEMI/1.14.5 (Awara-Onsen) FLIM/1.14.5 (Demachiyanagi) APEL/10.6 MULE XEmacs/21.4 (patch 14) (Reasonable Discussion) (i386--freebsd) Sender: news Subject: Re: no ulpt0 in FreeBSD 5.1R X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:35:00 -0000 At Fri, 07 Nov 2003 17:08:30 -0400, Bremner David wrote: > > > I am just setting up a new machine with 5.1R. I have usb in the > kernel (I'm running the generic kernel from the install). > My lexmark 323 which used to show up fine as ulpt0 under 4.9rc1 > does not show up anymore. > I "fixed" the problem. See http://www.freebsd.org/cgi/query-pr.cgi?pr=59147 if you are interested. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:40:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1377C16A4CF for ; Mon, 10 Nov 2003 12:40:13 -0800 (PST) Received: from pi.codefab.com (pi.codefab.com [66.234.138.67]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1AAED43FAF for ; Mon, 10 Nov 2003 12:40:12 -0800 (PST) (envelope-from cswiger@mac.com) Received: from [10.1.1.193] (dpvc-68-161-244-25.ny325.east.verizon.net [68.161.244.25]) by pi.codefab.com (8.12.9p2/8.12.10) with ESMTP id hAAKdxEC072311; Mon, 10 Nov 2003 15:39:59 -0500 (EST) In-Reply-To: References: Mime-Version: 1.0 (Apple Message framework v606) Content-Type: text/plain; charset=US-ASCII; format=flowed Message-Id: <0CFF327D-13BE-11D8-AD24-003065ABFD92@mac.com> Content-Transfer-Encoding: 7bit From: Charles Swiger Date: Mon, 10 Nov 2003 15:39:59 -0500 To: chip.wiegand@simrad.com X-Mailer: Apple Mail (2.606) X-Spam-Status: No, hits=0.0 required=7.0 tests=none autolearn=no version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on pi.codefab.com cc: FreeBSD Questions Subject: Re: Anymore help out there? Re: mail never gets sent X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:40:13 -0000 On Nov 10, 2003, at 3:05 PM, chip.wiegand@simrad.com wrote: > Thanks Chuck, and the others with the same suggestion. I've set that > parameter in the freebsd.mc file and still have the same problem. I > ssh'd > into my current web server box, running RedHat, and sent a message from > the cli mail and watched the messages, and did the same on the FreeBSD > box > (which will replace the Linux box soon as mail works). Look at the two > sections below, notice the lines 250 in each section - they are the > reverse of each other. The message sent from the Linux box went > through to > its destination, but not the message from the FreeBSD box. Your examples are showing the handoff between untrusted local mail client using SMTP to localhost:25 to deliver the mail to the local spool, and not the communication from your machine to the next SMTP server. [ Prior versions of sendmail were setuid-root, and "mail -v" output was more useful; 8.12 is not installed setuid-root anymore... ] > The Linux box had no configuring done to make it send mail out. I have > set up previous versions of FreeBSD, all the way back to 3.0, and have > never had to do any configuring to get any to send mail out. It has > always just worked, > including a previous setup here in this office connected to the same > network. So I'm wondering what has changed in 5.1 to cause this > problem, > if anything. Or is it just a bad install? It's unlikely to be a bad install. Try running: echo "3,0 cswiger@mac.com" | sendmail -bt ...on the Linux machine, and see whether the last line relays through your ISP's smarthost, or directly to smtp-mx.mac.com. Compare that to what the FreeBSD machine is doing. -- -Chuck From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:51:00 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F0A4F16A4CE for ; Mon, 10 Nov 2003 12:51:00 -0800 (PST) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5810943FE1 for ; Mon, 10 Nov 2003 12:50:58 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAAKoNnx016417 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 10 Nov 2003 20:50:53 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAAKoMPe016416; Mon, 10 Nov 2003 20:50:22 GMT (envelope-from matthew) Date: Mon, 10 Nov 2003 20:50:22 +0000 From: Matthew Seaman To: "Tucker, Laurie" Message-ID: <20031110205022.GC14293@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , "Tucker, Laurie" , freebsd-questions@freebsd.org References: <1903E2FB81A1F4479061D5291A58803803DD07F4@cceexc23.americas.cpqcorp.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="AbQceqfdZEv+FvjW" Content-Disposition: inline In-Reply-To: <1903E2FB81A1F4479061D5291A58803803DD07F4@cceexc23.americas.cpqcorp.net> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=AWL,BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: freebsd-questions@freebsd.org Subject: Re: CVSweb Problem with Netscape Server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:51:01 -0000 --AbQceqfdZEv+FvjW Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 01:16:53PM -0600, Tucker, Laurie wrote: > OK -- >=20 > I have installed CVSWeb on HPUX using a netscape server. After > removing the > -wt from cvsweb.cgi I am able to view the initial page.=20 > =20 > Now I am getting=20 >=20 > NOTE: There are 104 files, but none matches the current tag ().=20 > What can I do to fix this? Hmmm... Seems to be the night for asking apparently non-FreeBSD questions in FreeBSD mailing lists... First of all, let me point you at http://www.freebsd.org/projects/cvsweb.html which is a much better place to start looking for FreeBSD-cvsweb related stuff. Searching the archives of the freebsd-cvsweb@freebsd.org mailing list will probably be helpful to you. There's also http://freebsd.rambler.ru/ which is a new search interface to the FreeBSD mailing list archives that a lot of people (me included) quite like. However, I suspect that the simple answer is that you need to scroll down to the bottom of the page and select a valid tag from the 'Show only files with tag:' or 'View only Branch:' pull-downs. Cheers, Matthew=09 --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --AbQceqfdZEv+FvjW Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/r/oOdtESqEQa7a0RAtzeAJ96MH/yhSb00oQh6+JXwAowr+4VCwCdHlq6 PAmfHylq8BL0BxB9g0L+HUY= =aOmn -----END PGP SIGNATURE----- --AbQceqfdZEv+FvjW-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 12:52:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 124B016A4CE for ; Mon, 10 Nov 2003 12:52:19 -0800 (PST) Received: from avocet.mail.pas.earthlink.net (avocet.mail.pas.earthlink.net [207.217.120.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1FCB843FE1 for ; Mon, 10 Nov 2003 12:52:17 -0800 (PST) (envelope-from gws@silliman.net) Received: from user50.net168.nj.sprint-hsd.net ([65.164.204.50] helo=mgp.silliman.net) by avocet.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 1AJJ1E-0004T1-00; Mon, 10 Nov 2003 12:52:16 -0800 Received: from silliman.net (gws.silliman.net [192.168.2.10]) by mgp.silliman.net (8.12.6/8.12.6) with ESMTP id hAAKqENL036206; Mon, 10 Nov 2003 15:52:18 -0500 (EST) (envelope-from gws@silliman.net) Message-ID: <3FAFFA75.2000206@silliman.net> Date: Mon, 10 Nov 2003 15:52:05 -0500 From: Guy Silliman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Olaf Hoyer References: <3FAFA9BE.20306@silliman.net> <20031110200355.E31965@gaff.hhhr.ision.net> In-Reply-To: <20031110200355.E31965@gaff.hhhr.ision.net> X-Spam-Status: No, hits=-27.6 required=5.0 tests=EMAIL_ATTRIBUTION,HTML_10_20,HTML_MESSAGE,IN_REP_TO, REFERENCES,REPLY_WITH_QUOTES,USER_AGENT_MOZILLA_UA version=2.53 X-Spam-Checker-Version: SpamAssassin 2.53 (1.174.2.15-2003-03-30-exp) Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.1 cc: freebsd-questions@freebsd.org Subject: Re: Compaq 1850R panics with 5.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 20:52:19 -0000 Thanks for the reply... I will give 4.8R a shot - I am trying to get 5.1R to work... but I will pass if it is too rough for production machines. I will also try that bios tweak. Guy Olaf Hoyer wrote: >On Mon, 10 Nov 2003, Guy Silliman wrote: > > > >>I am trying to get a Compaq 1850R running. It is a dual PII 400MHz >>machine that works fine with Win2k server... but >>I would prefer to use fbsd 5.x but I am stumped by this panic at >>sysinstall. >> >> > >Hi! > >Well, the old Compaqs have some quite rough edges, and 5.1R (or do you >use a -current snapshot?) is also in some things not that nice... >Sometimes you have to set it to NT4-OS Type. > > > >>I have searched all the lists and have tried several fixes mentioned >>including the "Full table - Mapped" and OS set to Win2k in the BIOS. >>I have tried disabling the onboard NIC as a possible source of conflicts >>but no luck. >> >> >> >I had in my former company a 1850 running SMP with a 4.8-stable. >The onboard SCSI is basically a Symbios one, and it was recognized >without hassle. > >(Ok, it needs the compaq tool partition to do RAID stuff, but... well, >broke it during installation) > > > > >>I would be willing to go with a late 4.x but it does not probe the >>onboard SCSI thus I have no drives. >>I do have a Smart Array 3200 ordered and coming - this may solve the 4.x >>issue, but I am puzzled by the panic with 5.x. >> >> >> > >That ist strange indeed, my box (dual PIII-500) went fine. >But perhaps there is also a different Mainboard in, with some >undocumented change in the series. > >HTH >Olaf > > > From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 13:06:34 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B9CD816A4CE for ; Mon, 10 Nov 2003 13:06:34 -0800 (PST) Received: from smtp.infracaninophile.co.uk (happy-idiot-talk.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id EF3F643FE9 for ; Mon, 10 Nov 2003 13:06:32 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAAL66nx016584 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 10 Nov 2003 21:06:24 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAAL61CY016583; Mon, 10 Nov 2003 21:06:01 GMT (envelope-from matthew) Date: Mon, 10 Nov 2003 21:06:01 +0000 From: Matthew Seaman To: Robin Schoonover Message-ID: <20031110210601.GD14293@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Robin Schoonover , "Karel J. Bosschaart" , freebsd-questions@freebsd.org References: <20031109145538.0aa4ce3d.end@endif.cjb.net> <20031110091130.GA11620@phys9911.phys.tue.nl> <20031110102134.13db5376.end@endif.cjb.net> <20031110190056.GA48992@phys9911.phys.tue.nl> <20031110122930.0e72e2f0.end@endif.cjb.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="PGNNI9BzQDUtgA2J" Content-Disposition: inline In-Reply-To: <20031110122930.0e72e2f0.end@endif.cjb.net> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: "Karel J. Bosschaart" cc: freebsd-questions@freebsd.org Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 21:06:34 -0000 --PGNNI9BzQDUtgA2J Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Mon, Nov 10, 2003 at 12:29:30PM -0700, Robin Schoonover wrote: > Or maybe it was only partially installed (and some of the opengl libs > weren't). That doesn't make sense... So I reinstalled the nvidia-driver > from ports, and tried running tuxracer again. Doh! Crashed X. Of cours= e, > GLX isn't loaded, so it gets confused, so I'll just have to restart > X....and I get this message: Did you update your XFree86-libraries port recently? It will fight with nvidia-driver for the ownership of at least the libGL.so.1 shlib: % pkg_info -W /usr/X11R6/lib/libGL.so.1 pkg_info: both XFree86-libraries-4.3.0_6 and nvidia-driver-1.0.4365 cla= im to have installed /usr/X11R6/lib/libGL.so.1 Which is why re-installing nvidia-driver helps. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --PGNNI9BzQDUtgA2J Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/r/25dtESqEQa7a0RArFxAJ0bKiHSnuTRFsmICSx3TSiBZs9Y8gCfbUNd wA7DKUVBZ3AMTCqxcGT2I8s= =6DZM -----END PGP SIGNATURE----- --PGNNI9BzQDUtgA2J-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 13:18:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 00CA816A4CE for ; Mon, 10 Nov 2003 13:18:45 -0800 (PST) Received: from franklin-belle.com (adsl-65-68-247-73.dsl.crchtx.swbell.net [65.68.247.73]) by mx1.FreeBSD.org (Postfix) with ESMTP id 194A843FF3 for ; Mon, 10 Nov 2003 13:18:43 -0800 (PST) (envelope-from jacks@sage-american.com) Received: from sagea (sagea.sage-american [10.0.0.3]) by franklin-belle.com (8.12.8p2/8.12.8) with SMTP id hAALIKCP017944 for ; Mon, 10 Nov 2003 15:18:20 -0600 (CST) (envelope-from jacks@sage-american.com) Message-Id: <3.0.5.32.20031110151819.01431468@10.0.0.15> X-Sender: jacks@10.0.0.15 X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Mon, 10 Nov 2003 15:18:19 -0600 To: freebsd-questions@freebsd.org From: "Jack L. Stone" Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Spam-Status: No, hits=0.0 required=4.5 tests=none autolearn=ham version=2.60-fbelle.rules_v1 X-Spam-Checker-Version: SpamAssassin 2.60-fbelle.rules_v1 (1.212-2003-09-23-exp) on franklin-belle.com Subject: Help! Runaway NATD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 21:18:45 -0000 FreeBSD 4.8-RELEASE-p13 - GW/router/NAT/FW/Caching DNS - Bind-8.3x + IPFW(8) Have just setup the above to route mainly for a LAN (in place of hardware router), but natd runs non-stop as per TOP(1) and keeps eating up the CPU until it crashes. Takes about 1/2 hour to eat up the resources and requires a reboot -- then the problem just starts over again. Typical firewall setup used in a number of our servers which diverts to port 8668 and then the packets are redirected to limited ports on the various workstations. NATD acts like it is in a loop and rehashing the packets over and over. There is a very light load of packets flowing over the rl0 external interface. Natd is loaded in usual way. Have killed off most other daemons, but NATD keeps running as shown by TOP(1) Never seen this before. Would appreciate any ideas on how to fix it.... Thanks in advance. Best regards, Jack L. Stone, Administrator Sage American http://www.sage-american.com jacks@sage-american.com From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 13:20:03 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 74C6A16A4CF for ; Mon, 10 Nov 2003 13:20:03 -0800 (PST) Received: from as9-2-1.bi.s.bonet.se (as9-2-1.bi.s.bonet.se [217.215.7.177]) by mx1.FreeBSD.org (Postfix) with ESMTP id 448BD43FBF for ; Mon, 10 Nov 2003 13:19:59 -0800 (PST) (envelope-from peo@intersonic.se) Received: from intersonic.se (magnolia.h.inter-sonic.com [192.168.2.2]) by as9-2-1.bi.s.bonet.se (Postfix) with ESMTP id 2CD11D40A8; Mon, 10 Nov 2003 22:19:58 +0100 (CET) Message-ID: <3FB000FD.5000504@intersonic.se> Date: Mon, 10 Nov 2003 22:19:57 +0100 From: Per olof Ljungmark Organization: Intersonic AB User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031109 X-Accept-Language: en-us, en, sv MIME-Version: 1.0 To: Guy Silliman References: <3FAFA9BE.20306@silliman.net> In-Reply-To: <3FAFA9BE.20306@silliman.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Compaq 1850R panics with 5.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 21:20:03 -0000 Guy Silliman wrote: > I am trying to get a Compaq 1850R running. It is a dual PII 400MHz > machine that works fine with Win2k server... but > I would prefer to use fbsd 5.x but I am stumped by this panic at > sysinstall. I have searched all the lists and have tried several fixes > mentioned including the "Full table - Mapped" and OS set to Win2k in the > BIOS. I have tried disabling the onboard NIC as a possible source of > conflicts but no luck. > > I would be willing to go with a late 4.x but it does not probe the > onboard SCSI thus I have no drives. > I do have a Smart Array 3200 ordered and coming - this may solve the 4.x > issue, but I am puzzled by the panic with 5.x. > FWIW, I had identical problems with two 1850's, one PII400 single CPU and one PII450 dual. Both are now running fine with 4.9-REL, the first with a SmartArray 221 and the second with a Smart Array 3200. There has been a few problems apparently with the sym driver for the built in SCSI and I'm not using it in either. For instance, I had this problem in 4.8-REL: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/52331 where I had 8 drives but only 4 visible. I tend to agree with another poster that there are changes between the PII and PIII 1850 motherboards that makes the formar fail with 5.1 and the latter is ok. just my $0.02 From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 13:42:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9D4AB16A4CF for ; Mon, 10 Nov 2003 13:42:45 -0800 (PST) Received: from luftpost.plosh.net (luftpost.plosh.net [204.152.186.181]) by mx1.FreeBSD.org (Postfix) with ESMTP id 731BF43FDF for ; Mon, 10 Nov 2003 13:42:43 -0800 (PST) (envelope-from plosher-keyword-freebsd.a36e57@plosh.net) Received: by luftpost.plosh.net (Postfix, from userid 1001) id 7E57232606; Mon, 10 Nov 2003 13:42:48 -0800 (PST) Received: from dhcp-2.sql1.plosh.net (tardis-nat.plosh.net [64.139.14.228]) by luftpost.plosh.net (tmda-ofmipd) with ESMTP; Mon, 10 Nov 2003 13:42:47 -0800 (PST) Organization: Plosh Networking To: questions@freebsd.org, hardware@freebsd.org Date: Mon, 10 Nov 2003 13:42:41 -0800 User-Agent: KMail/1.5.3 References: <200311101002.41697.plosher@plosh.net> In-Reply-To: <200311101002.41697.plosher@plosh.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311101342.41423.plosher@plosh.net> From: Peter Losher X-Delivery-Agent: TMDA/0.87 (Carry Back) Subject: Re: Rocketport (rp0) mapping failure on 5.1-REL X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 21:42:45 -0000 It looks like what I might have is one of the new Universal PCI RocketPort cards - does anyone know if the current rp driver supports the card? (Comport no longer makes the 32-bit-only PCI cards, just the 32 and 64 bit compatible uPCI cards now) If not, is there a new rp driver I can test out that may be in -CURRENT? Best Wishes - Peter On Monday 10 November 2003 10:02 am, Peter Losher wrote: > I am installing a RocketPort PCI card into a Acer Altos system; the > box was originally running Linux, slapping on FreeBSD 5.1 on the box, > the system throws up this error when trying to attach the RP card: > > -=- > rp0: port 0x5400-0x54ff,0x5000-0x507f mem > 0xed8ffc00-0xed8ffc7f irq 11 at device 2.0 on pci1 > rp0: ioaddr mapping failed for RocketPort(PCI). > device_probe_and_attach: rp0 attach returned 6 > -=- > > Has anyone ever seen such an error, and if so, how did you get around > it? (I haven't been able to find anything via Google) From what I > have been told, the card came up cleanly when the box was running > Linux. > > Best Wishes - Peter -- [ http://www.plosh.net/ ] - "Resident Kalifornian" From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 13:46:29 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2AE6816A4CE for ; Mon, 10 Nov 2003 13:46:29 -0800 (PST) Received: from lilzmailfe01.liwest.at (lilzmailfe01.liwest.at [212.33.55.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id DEEBC43F75 for ; Mon, 10 Nov 2003 13:46:27 -0800 (PST) (envelope-from dgw@liwest.at) Received: from [212.33.58.27] (helo=cm58-27.liwest.at) by lilzmailfe01.liwest.at with esmtp (Exim 4.14) id 1AJJrd-0008P2-LS; Mon, 10 Nov 2003 22:46:25 +0100 From: Daniela To: "Jack L. Stone" , freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 22:42:09 +0000 User-Agent: KMail/1.5.3 References: <3.0.5.32.20031110151819.01431468@10.0.0.15> In-Reply-To: <3.0.5.32.20031110151819.01431468@10.0.0.15> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311102242.09544.dgw@liwest.at> Subject: Re: Help! Runaway NATD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 21:46:29 -0000 On Monday 10 November 2003 21:18, Jack L. Stone wrote: > FreeBSD 4.8-RELEASE-p13 - GW/router/NAT/FW/Caching DNS - Bind-8.3x + > IPFW(8) > > Have just setup the above to route mainly for a LAN (in place of hardware > router), but natd runs non-stop as per TOP(1) and keeps eating up the CPU > until it crashes. Takes about 1/2 hour to eat up the resources and requires > a reboot -- then the problem just starts over again. Have you tried to attach to the process with gdb(1) or truss(1)? Also please show us what `ps ax` says about natd. Can you get a core dump? Good luck! Daniela From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 13:51:32 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ABE6416A4CE for ; Mon, 10 Nov 2003 13:51:32 -0800 (PST) Received: from smtp09.wxs.nl (smtp09.wxs.nl [195.121.6.38]) by mx1.FreeBSD.org (Postfix) with ESMTP id B2FC543FE0 for ; Mon, 10 Nov 2003 13:51:31 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186])18questions@freebsd.org; Mon, 10 Nov 2003 22:48:51 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAALoqQb003585; Mon, 10 Nov 2003 22:50:53 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAALopYi003584; Mon, 10 Nov 2003 22:50:51 +0100 (CET envelope-from akruijff) Date: Mon, 10 Nov 2003 22:50:51 +0100 From: Alex de Kruijff In-reply-to: <3FAF206A.4050204@quik.com> To: james Message-id: <20031110215051.GA559@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <3FACD67B.5090807@quik.com> <20031109124420.GB553@dds.nl> <3FAE2D98.6050102@quik.com> <20031110010521.GF553@dds.nl> <3FAF206A.4050204@quik.com> cc: questions@freebsd.org Subject: Re: how to modem X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 21:51:32 -0000 I've also CC questions@freebsd.org. Could you also do this next time? On Sun, Nov 09, 2003 at 09:21:46PM -0800, james wrote: > Alex de Kruijff wrote: > > >On Sun, Nov 09, 2003 at 04:05:44AM -0800, james wrote: > > > > > >>Alex de Kruijff wrote: > >> > >> > >> > >>>On Sat, Nov 08, 2003 at 03:41:47AM -0800, james wrote: > >>> > >>> > >>> > >>> > >>>>I can't find the modem . although I did finally get kde installed > >>>>are there any simple instructions for finding your modem and > >>>>hitching up to the internet > >>>> > >>>> > >>>> > >>>> > >>>What type of modum do you have? (i.e. external/internal, > >>>plug-n-play/jumpers) > >>> > >>>Did you see it in the output of 'dmesg'? > >>> > >>> > >>> > >>im not sure of the name but it is an old internal jumper style with the > >>tiny switches instead of the pull off style of jumpers > >>thkns ill try dmesg well I took it out and looked at it it is set to > >>com 4 and its a rockwell an old one the dmesg didn't seem to know what > >>it was will try to give more info i am useing a aptiva with 32 megs ram > >>and the vedio card has 2 mb mem what else there is an maxetor 1 gig hd > >> > >> > > > >(Is it ISA or PCI?) > > > >I bleave, from what i have read, that you don't requere the port you > >installed. Leave it for now. > > > >What have you done to get it working? (Read documentation, commands > >entered) > > > >You wanna read this: > >http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/userppp.html > > > > > > > hey thanks for your patiance I read the page from the link and i am > thinking i may not have the modem set right it was set to com four and > i changed it to com 2 A PC normaly have two com port and these are com 1 and 2. You can change it to com 2 if you like, but you do have to the com port 2 off line. At the time that i was struggeling with my modem my thougths where that com 4 would be /dev/cuaa3. It exists so FreeBSD sould be able to handle it. > also there is an error message when I click on the kppp dail up icon i > get this error : /etc/resolve.conf is missing or cannot be read. Whe you call your ISP it normaly gives you the information you need to use the internet. The IP of the next node is one of them and goes in to this file. I'll give you the shell command that just creates this file, but doesn't place anything in it, since souldn't requere that. The right permissions are created by defauld. Run as Root: touch /etc/resolve.conf > Ask > your andministator to creat this file . (can be empty) with appropriate > read write permissions . I am a dunce a creating things so how do I > proceed??? it is plugged into an ISA slot if that helps > My advise would be to forget kppp for now until you have you modem working with ppp. The command you give from the shell (as root) to dial are: (# and > are not part of the command) # ppp > dial provider At this time you should hear you modem dial. If it doesn't change something and try again. Create the configuration files as stated in 18.2.1.3.1 PPP and Static IP Addresses and 18.2.1.3.2 PPP and Dynamic IP Addresses. I'm assuming you have a dynamic IP address, like most calles have. Then try to dial. If it doesn't work change the com ports and try again. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 13:52:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1F41316A4CE for ; Mon, 10 Nov 2003 13:52:19 -0800 (PST) Received: from flamingo.mail.pas.earthlink.net (flamingo.mail.pas.earthlink.net [207.217.120.232]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4337143FDD for ; Mon, 10 Nov 2003 13:52:18 -0800 (PST) (envelope-from gws@silliman.net) Received: from user50.net168.nj.sprint-hsd.net ([65.164.204.50] helo=mgp.silliman.net) by flamingo.mail.pas.earthlink.net with esmtp (Exim 3.33 #1) id 1AJJxJ-0004NW-00; Mon, 10 Nov 2003 13:52:17 -0800 Received: from silliman.net (gws.silliman.net [192.168.2.10]) by mgp.silliman.net (8.12.6/8.12.6) with ESMTP id hAALqINL036306; Mon, 10 Nov 2003 16:52:21 -0500 (EST) (envelope-from gws@silliman.net) Message-ID: <3FB00889.1070402@silliman.net> Date: Mon, 10 Nov 2003 16:52:09 -0500 From: Guy Silliman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.4) Gecko/20030624 Netscape/7.1 (ax) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Per olof Ljungmark References: <3FAFA9BE.20306@silliman.net> <3FB000FD.5000504@intersonic.se> In-Reply-To: <3FB000FD.5000504@intersonic.se> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Status: No, hits=-31.9 required=5.0 tests=EMAIL_ATTRIBUTION,IN_REP_TO,QUOTED_EMAIL_TEXT,REFERENCES, REPLY_WITH_QUOTES,USER_AGENT_MOZILLA_UA version=2.53 X-Spam-Checker-Version: SpamAssassin 2.53 (1.174.2.15-2003-03-30-exp) cc: freebsd-questions@freebsd.org Subject: Re: Compaq 1850R panics with 5.x X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 21:52:19 -0000 well I might have some insight into this mystery.... I am currently running with a less then fully populated drive cage... I have 2 of the 3 1 inch 9.1gb drives in place. I have had them placed in the slot 0 and slot 1 position. And win2k server loaded fine but fbsd did not see the drives. On a hunch - I just moved the drives up so that the empty spot is slot 0 and the 2 drives are in slots 1 and 2... 4.7R saw the drives. 4.9R does not. Now I am new to this chassis - I don't know if I am supposed to have a blank in this empty slot - but it will not matter ot me in the long run, as I have another 9.1gb drive on its way to fill the empty spot.. I just hope I do not have a buggy backplane. Guy Per olof Ljungmark wrote: > Guy Silliman wrote: > >> I am trying to get a Compaq 1850R running. It is a dual PII 400MHz >> machine that works fine with Win2k server... but >> I would prefer to use fbsd 5.x but I am stumped by this panic at >> sysinstall. I have searched all the lists and have tried several >> fixes mentioned including the "Full table - Mapped" and OS set to >> Win2k in the BIOS. I have tried disabling the onboard NIC as a >> possible source of conflicts but no luck. >> >> I would be willing to go with a late 4.x but it does not probe the >> onboard SCSI thus I have no drives. >> I do have a Smart Array 3200 ordered and coming - this may solve the >> 4.x issue, but I am puzzled by the panic with 5.x. >> > FWIW, I had identical problems with two 1850's, one PII400 single CPU > and one PII450 dual. Both are now running fine with 4.9-REL, the first > with a SmartArray 221 and the second with a Smart Array 3200. > > There has been a few problems apparently with the sym driver for the > built in SCSI and I'm not using it in either. For instance, I had this > problem in 4.8-REL: > http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/52331 > where I had 8 drives but only 4 visible. > > I tend to agree with another poster that there are changes between the > PII and PIII 1850 motherboards that makes the formar fail with 5.1 and > the latter is ok. > > just my $0.02 > From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 14:02:24 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 61A0916A4D0 for ; Mon, 10 Nov 2003 14:02:24 -0800 (PST) Received: from franklin-belle.com (adsl-65-68-247-73.dsl.crchtx.swbell.net [65.68.247.73]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5A9D443FDF for ; Mon, 10 Nov 2003 14:02:23 -0800 (PST) (envelope-from jacks@sage-american.com) Received: from sagea (sagea.sage-american [10.0.0.3]) by franklin-belle.com (8.12.8p2/8.12.8) with SMTP id hAAM20CP018369; Mon, 10 Nov 2003 16:02:00 -0600 (CST) (envelope-from jacks@sage-american.com) Message-Id: <3.0.5.32.20031110160157.0142b020@10.0.0.15> X-Sender: jacks@10.0.0.15 X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Mon, 10 Nov 2003 16:01:57 -0600 To: Daniela , freebsd-questions@freebsd.org From: "Jack L. Stone" In-Reply-To: <200311102242.09544.dgw@liwest.at> References: <3.0.5.32.20031110151819.01431468@10.0.0.15> <3.0.5.32.20031110151819.01431468@10.0.0.15> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" X-Spam-Status: No, hits=0.0 required=4.5 tests=none autolearn=ham version=2.60-fbelle.rules_v1 X-Spam-Checker-Version: SpamAssassin 2.60-fbelle.rules_v1 (1.212-2003-09-23-exp) on franklin-belle.com Subject: Re: Help! Runaway NATD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 22:02:24 -0000 At 10:42 PM 11.10.2003 +0000, Daniela wrote: >On Monday 10 November 2003 21:18, Jack L. Stone wrote: >> FreeBSD 4.8-RELEASE-p13 - GW/router/NAT/FW/Caching DNS - Bind-8.3x + >> IPFW(8) >> >> Have just setup the above to route mainly for a LAN (in place of hardware >> router), but natd runs non-stop as per TOP(1) and keeps eating up the CPU >> until it crashes. Takes about 1/2 hour to eat up the resources and requires >> a reboot -- then the problem just starts over again. > >Have you tried to attach to the process with gdb(1) or truss(1)? >Also please show us what `ps ax` says about natd. >Can you get a core dump? > >Good luck! >Daniela > Thanks for the quick reply. No, haven't had chance to redo the kernel for gdb, etc. But, here's some more info from the "ps -ax" and log. The tcp start out very small and keep growing in big leaps as below -- this is just before running out of CPU.... >From "/var/log/alias.log" icmp=0, udp=8, tcp=33830, pptp=0, proto=0, frag_id=0 frag_ptr=0 / tot=33838 (sock=0) icmp=0, udp=8, tcp=33831, pptp=0, proto=0, frag_id=0 frag_ptr=0 / tot=33839 (sock=0) ...a FEW minutes later: icmp=2, udp=9, tcp=41608, pptp=0, proto=0, frag_id=0 frag_ptr=0 / tot=41619 (sock=0) icmp=2, udp=9, tcp=41609, pptp=0, proto=0, frag_id=0 frag_ptr=0 / tot=41620 (sock=0) PID TT STAT TIME COMMAND 0 ?? DLs 0:00.00 (swapper) 1 ?? ILs 0:00.01 /sbin/init -- 2 ?? DL 0:00.00 (pagedaemon) 3 ?? DL 0:00.00 (vmdaemon) 4 ?? DL 0:00.01 (bufdaemon) 5 ?? DL 0:00.21 (syncer) 6 ?? DL 0:00.01 (vnlru) 23 ?? Is 0:00.00 adjkerntz -i 116 ?? Rs 6:53.75 /sbin/natd -f /etc/natd.conf -n rl0 133 ?? Ss 0:00.07 /usr/sbin/syslogd -s 136 ?? Is 0:00.13 /usr/sbin/named -u bind -g bind 139 ?? Ss 0:00.10 ntpd -p /var/run/ntpd.pid 142 ?? Is 0:00.01 timed -F earth.netwood.net 148 ?? Is 0:00.00 /usr/sbin/inetd -wW 150 ?? Is 0:00.02 /usr/sbin/cron 152 ?? Is 0:00.62 /usr/sbin/sshd 213 ?? Ss 0:00.41 /usr/local/sbin/httpd 218 ?? I 0:00.00 /usr/local/sbin/httpd 219 ?? I 0:00.00 /usr/local/sbin/httpd 220 ?? I 0:00.00 /usr/local/sbin/httpd 221 ?? I 0:00.00 /usr/local/sbin/httpd 222 ?? I 0:00.00 /usr/local/sbin/httpd 223 ?? Is 0:00.00 /usr/local/sbin/dhcpd 254 ?? S 0:00.10 /usr/local/libexec/mysqld --basedir=/usr/local --datadir=/var/db/mysql --user=mysql --pid-file=/va 264 ?? Is 0:00.04 /usr/local/libexec/postfix/master 265 ?? I 0:00.02 pickup -l -t fifo -u 266 ?? I 0:00.26 qmgr -l -t fifo -u 267 ?? I 0:00.07 sshd: kuni [priv] (sshd) 269 ?? I 0:00.04 sshd: kuni@ttyp0 (sshd) 281 ?? I 0:00.07 sshd: jacks [priv] (sshd) 283 ?? S 0:04.24 sshd: jacks@ttyp1 (sshd) 270 p0 Is 0:00.04 -csh (csh) 273 p0 I+ 0:00.05 _su (csh) 284 p1 Is 0:00.04 -tcsh (tcsh) 290 p1 S 0:00.07 _su (csh) 387 p1 R+ 0:00.00 ps ax 231 v0 Is+ 0:00.01 /usr/libexec/getty Pc ttyv0 232 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1 233 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2 234 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3 235 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4 236 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5 237 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6 238 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7 227 con- I 0:00.02 /bin/sh /usr/local/bin/safe_mysqld --user=mysql --datadir=/var/db/mysql --pid-file=/var/db/mysql/e Best regards, Jack L. Stone, Administrator Sage American http://www.sage-american.com jacks@sage-american.com From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 14:16:36 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ABB4916A4CE for ; Mon, 10 Nov 2003 14:16:36 -0800 (PST) Received: from lilzmailfe01.liwest.at (lilzmailfe01.liwest.at [212.33.55.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 08B5643F75 for ; Mon, 10 Nov 2003 14:16:36 -0800 (PST) (envelope-from dgw@liwest.at) Received: from [212.33.58.27] (helo=cm58-27.liwest.at) by lilzmailfe01.liwest.at with esmtp (Exim 4.14) id 1AJKKp-0003hH-32 for questions@freebsd.org; Mon, 10 Nov 2003 23:16:35 +0100 From: Daniela To: questions@freebsd.org Date: Mon, 10 Nov 2003 23:12:20 +0000 User-Agent: KMail/1.5.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311102312.20529.dgw@liwest.at> Subject: Is the swap partition really required for a live FS CD-ROM? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 22:16:36 -0000 Hi all, I'm creating a Knoppix-like FreeBSD release (live filesystem, runs from CD) with 4.9 sources. I'm almost done, but I don't know what to do with swap. I read somewhere that I must have a swap partition in my /etc/fstab, can't this requirement be overridden? And can I create a vn0 device now, and mount it as a filesystem of type union over / so all directories appear writable? If I do this, is there some way to save these written files (preferably into a single compressed file on a floppy or USB memory stick) and restore them on the next boot? Please help me, I'm really stuck here. Daniela From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 14:26:00 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id CC88E16A4CE for ; Mon, 10 Nov 2003 14:26:00 -0800 (PST) Received: from lilzmailfe01.liwest.at (lilzmailfe01.liwest.at [212.33.55.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 140D643FBF for ; Mon, 10 Nov 2003 14:26:00 -0800 (PST) (envelope-from dgw@liwest.at) Received: from [212.33.58.27] (helo=cm58-27.liwest.at) by lilzmailfe01.liwest.at with esmtp (Exim 4.14) id 1AJKTv-0004gg-86; Mon, 10 Nov 2003 23:25:59 +0100 From: Daniela To: "Jack L. Stone" , freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 23:21:44 +0000 User-Agent: KMail/1.5.3 References: <3.0.5.32.20031110151819.01431468@10.0.0.15> <3.0.5.32.20031110160157.0142b020@10.0.0.15> In-Reply-To: <3.0.5.32.20031110160157.0142b020@10.0.0.15> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311102321.44756.dgw@liwest.at> Subject: Re: Help! Runaway NATD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 22:26:00 -0000 On Monday 10 November 2003 22:01, Jack L. Stone wrote: > At 10:42 PM 11.10.2003 +0000, Daniela wrote: > >On Monday 10 November 2003 21:18, Jack L. Stone wrote: > >> FreeBSD 4.8-RELEASE-p13 - GW/router/NAT/FW/Caching DNS - Bind-8.3x + > >> IPFW(8) > >> > >> Have just setup the above to route mainly for a LAN (in place of > >> hardware router), but natd runs non-stop as per TOP(1) and keeps eating > >> up the CPU until it crashes. Takes about 1/2 hour to eat up the > >> resources and requires a reboot -- then the problem just starts over > >> again. > > > >Have you tried to attach to the process with gdb(1) or truss(1)? > >Also please show us what `ps ax` says about natd. > >Can you get a core dump? > > > >Good luck! > >Daniela > > Thanks for the quick reply. No, haven't had chance to redo the kernel for > gdb, etc. But, here's some more info from the "ps -ax" and log. The tcp > start out very small and keep growing in big leaps as below -- this is just > before running out of CPU.... I'd definitely need at least the output of truss(1) to tell what's wrong. The commands would be: # killall natd # truss /sbin/natd -f /etc/natd.conf -n rl0 From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 14:44:52 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4350216A4CE for ; Mon, 10 Nov 2003 14:44:52 -0800 (PST) Received: from mta5.adelphia.net (mta5.adelphia.net [68.168.78.187]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1DB1543FCB for ; Mon, 10 Nov 2003 14:44:50 -0800 (PST) (envelope-from alexkelly@adelphia.net) Received: from desktop ([24.52.113.18]) by mta5.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031110224453.JZNE2407.mta5.adelphia.net@desktop> for ; Mon, 10 Nov 2003 17:44:53 -0500 Message-ID: <00f201c3a7dc$40706fa0$6400a8c0@desktop> From: "Alex Kelly" To: Date: Mon, 10 Nov 2003 17:44:50 -0500 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: Another Newbie Question: C or C++ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 22:44:52 -0000 I need to buy a book on C or C++ to help me in FreeBSD. Which would be = better to buy? I first thought a book on C would be best, because the OS is written in = C. But, now I'm not sure because I read that gcc can compile C++ too = (so, I'm assuming C++ must get used too). Does it even matter? Suggestions? From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 14:58:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 260DA16A4CF for ; Mon, 10 Nov 2003 14:58:38 -0800 (PST) Received: from m23.nyc.untd.com (m23.nyc.untd.com [64.136.22.86]) by mx1.FreeBSD.org (Postfix) with SMTP id 2876043F3F for ; Mon, 10 Nov 2003 14:58:37 -0800 (PST) (envelope-from gs_stoller@juno.com) Received: from cookie.untd.com by cookie.untd.com for <"/s5f1SIGSI3+WdnoYQ8yROCqDWhRiJp2xLcNevkOLgRenhqv9hKCrw==">; Mon, 10 Nov 2003 14:58:05 PST Received: (from gs_stoller@juno.com) by m23.nyc.untd.com (jqueuemail) id JENLWS9K; Mon, 10 Nov 2003 14:58:05 PST To: jonc@chen.org.nz Date: Mon, 10 Nov 2003 17:25:58 -0500 Message-ID: <20031110.175531.-335519.3.GS_Stoller@juno.com> X-Mailer: Juno 4.0.9 MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Juno-Line-Breaks: 0-1,3-24,26,28-29,31,33-34,36-43 X-Juno-Att: 0 X-Juno-RefParts: 0 From: Gerald S Stoller cc: gs_stoller@hotmail.com cc: freebsd-questions@FreeBSD.ORG cc: gs_stoller@juno.com Subject: Re: your mail X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 22:58:38 -0000 On Mon, 3 Nov 2003 18:27:44 +1300 Jonathan Chen writes: > On Sun, Nov 02, 2003 at 11:47:58PM -0500, Gerald S Stoller wrote: > > FreeBSD 4.3-RELEASE FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 > GMT 2001 > > jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC i386 > > > > I received this message on my FreeBSD system in > root > > windows: > > sendmail[897]: h9V0K0r00897: forward /home/sstoller/.forward: > Group > > writable directory > > > > It doesn't tell me which directory it is > complaining about > > so I don't know which one to fix. > > Very likely /home/sstoller. > -- > Jonathan Chen Turns out that it was two directories,, /usr & /usr/homes . /home is a link to /usr/homes . When I have to do things in a directoryowned by root or the system, I make it group writable ( wheel ) and use the user sstoller (who is in wheel ) to make the changes. Thus I avoid having root do much, since work done by root can turn to disaster with typos. Later I change the directories back, but I have had the system crash and I could have forgotten about the directories when I next booted. Anyway, I still maintain that the message should name the directories that it is complaining about. > ---------------------------------------------------------------------- > "If everything's under control, you're going too > slow" > - Mario > Andretti > From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 15:01:12 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 148B916A4CE for ; Mon, 10 Nov 2003 15:01:12 -0800 (PST) Received: from Gina.esfm.ipn.mx (esfm.ipn.mx [148.204.102.61]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7143043FAF for ; Mon, 10 Nov 2003 15:01:06 -0800 (PST) (envelope-from mrspock@Gina.esfm.ipn.mx) Received: from Gina.esfm.ipn.mx (localhost [127.0.0.1]) by Gina.esfm.ipn.mx (8.12.9p1/8.12.9) with ESMTP id hAAN0m4I015294 for ; Mon, 10 Nov 2003 17:00:48 -0600 (CST) (envelope-from mrspock@Gina.esfm.ipn.mx) Received: from localhost (mrspock@localhost)hAAN0jqO015291 for ; Mon, 10 Nov 2003 17:00:48 -0600 (CST) Date: Mon, 10 Nov 2003 17:00:45 -0600 (CST) From: Eduardo Viruena Silva To: freebsd-questions@freebsd.org Message-ID: <20031110165645.W14914@Gina.esfm.ipn.mx> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Spam-Status: No, hits=1.2 required=5.0 tests=UPPERCASE_25_50 version=2.55 X-Spam-Level: * X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) Subject: ep0 lost in FreeBSD 5.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 23:01:12 -0000 Hello Pals! While installing FreeBSD 5.1-RELEASE in an old Pentium II computer I lost any contact with my 3com509 nic. I reinstalled FreeBSD 5.0 and it worked again, but I would like to use FreeBSD 5.1. WHAT IS HAPPENING? Will "ep" stop functioning in FreeBSD 5.1-RELEASE? It works fine with FreeBSD 5.0-RELEASE p7. - ______ _ * / /###\ / \ __ /\ /\ * / ./#### \ * \__|_/ | | / \/ \ | b#####| * _ | __ | | __ = .. \____ \ \_\#####/ / \| / \ | | /\_\/ = \_| * \___\###/ * \_/\_/\__/\__\/_/\__/ = \______/ _ | | From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 15:06:34 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D5F0316A4CE for ; Mon, 10 Nov 2003 15:06:34 -0800 (PST) Received: from mail013.syd.optusnet.com.au (mail013.syd.optusnet.com.au [211.29.132.67]) by mx1.FreeBSD.org (Postfix) with ESMTP id 281DE43FD7 for ; Mon, 10 Nov 2003 15:06:33 -0800 (PST) (envelope-from matti@optusnet.com.au) Received: from platypus (c211-30-200-121.rivrw2.nsw.optusnet.com.au [211.30.200.121])hAAN6WD05462 for ; Tue, 11 Nov 2003 10:06:32 +1100 Date: Tue, 11 Nov 2003 10:05:53 +1100 From: matti k To: freebsd-questions@freebsd.org Message-Id: <20031111100553.30694266.matti@optusnet.com.au> In-Reply-To: <20031110210601.GD14293@happy-idiot-talk.infracaninophile.co.uk> References: <20031109145538.0aa4ce3d.end@endif.cjb.net> <20031110091130.GA11620@phys9911.phys.tue.nl> <20031110102134.13db5376.end@endif.cjb.net> <20031110190056.GA48992@phys9911.phys.tue.nl> <20031110122930.0e72e2f0.end@endif.cjb.net> <20031110210601.GD14293@happy-idiot-talk.infracaninophile.co.uk> X-Mailer: Sylpheed version 0.9.7 (GTK+ 1.2.10; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: Enemy Territory X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 23:06:35 -0000 On Mon, 10 Nov 2003 21:06:01 +0000 Matthew Seaman wrote: > On Mon, Nov 10, 2003 at 12:29:30PM -0700, Robin Schoonover wrote: > > > Or maybe it was only partially installed (and some of the opengl > > libs weren't). That doesn't make sense... So I reinstalled the > > nvidia-driver from ports, and tried running tuxracer again. Doh! > > Crashed X. Of course, GLX isn't loaded, so it gets confused, so > > I'll just have to restart X....and I get this message: > > Did you update your XFree86-libraries port recently? It will fight > with nvidia-driver for the ownership of at least the libGL.so.1 > shlib: > > % pkg_info -W /usr/X11R6/lib/libGL.so.1 > pkg_info: both XFree86-libraries-4.3.0_6 and > nvidia-driver-1.0.4365 claim to have installed > /usr/X11R6/lib/libGL.so.1 > > Which is why re-installing nvidia-driver helps. I frequently run ~/NVIDIA-FreeBSD-x86-1.0-4365/make setup (as root) before rebooting and find this keeps the drivers in their place. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 15:14:54 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EC41116A4CF for ; Mon, 10 Nov 2003 15:14:54 -0800 (PST) Received: from clunix.cl.msu.edu (clunix.cl.msu.edu [35.9.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id F2CC043FA3 for ; Mon, 10 Nov 2003 15:14:53 -0800 (PST) (envelope-from jerrymc@clunix.cl.msu.edu) Received: (from jerrymc@localhost) by clunix.cl.msu.edu (8.11.7p1+Sun/8.11.7) id hAANEpc25533; Mon, 10 Nov 2003 18:14:51 -0500 (EST) From: Jerry McAllister Message-Id: <200311102314.hAANEpc25533@clunix.cl.msu.edu> To: alexkelly@adelphia.net (Alex Kelly) Date: Mon, 10 Nov 2003 18:14:50 -0500 (EST) In-Reply-To: <00f201c3a7dc$40706fa0$6400a8c0@desktop> from "Alex Kelly" at Nov 10, 2003 05:44:50 PM X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: Another Newbie Question: C or C++ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 23:14:55 -0000 > > I need to buy a book on C or C++ to help me in FreeBSD. > Which would be better to buy? This doesn't answer your C++ part of the question, but you should have the Kernighan & Ritchie "The C Programming Language" and then get something like "C A Reference Manual" (Latest edition is 5th I think) by Harbison and Steele. After that you might look at "C Programming FAQs" by Steve Summit. > > I first thought a book on C would be best, because the OS is written in C. But, now I'm not sure because I read that gcc can compile C++ too (so, I'm assuming C++ must get used too). > > Does it even matter? > > Suggestions? > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 15:23:23 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8405716A4CE for ; Mon, 10 Nov 2003 15:23:23 -0800 (PST) Received: from mta4.adelphia.net (mta4.adelphia.net [68.168.78.184]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8D65143FDD for ; Mon, 10 Nov 2003 15:23:20 -0800 (PST) (envelope-from alexkelly@adelphia.net) Received: from desktop ([24.52.113.18]) by mta4.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031110232323.IROO5780.mta4.adelphia.net@desktop>; Mon, 10 Nov 2003 18:23:23 -0500 Message-ID: <000e01c3a7e1$a16bc2a0$6400a8c0@desktop> From: "Alex Kelly" To: "Jerry McAllister" References: <200311102314.hAANEpc25533@clunix.cl.msu.edu> Date: Mon, 10 Nov 2003 18:23:21 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 cc: freebsd-questions@freebsd.org Subject: Re: Another Newbie Question: C or C++ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 23:23:23 -0000 ----- Original Message ----- From: "Jerry McAllister" To: "Alex Kelly" Cc: Sent: Monday, November 10, 2003 6:14 PM Subject: Re: Another Newbie Question: C or C++ > > > > I need to buy a book on C or C++ to help me in FreeBSD. > > Which would be better to buy? > > This doesn't answer your C++ part of the question, but you should have > the Kernighan & Ritchie "The C Programming Language" and then > get something like "C A Reference Manual" (Latest edition is 5th I think) > by Harbison and Steele. After that you might look at "C Programming FAQs" > by Steve Summit. Thanks, Jerry. So, it sounds like I should probably tackle C before C++. By the way, I saw the first two books you mentioned in Borders Book Store today while on my lunch break. They must be fairly popular. > > > > I first thought a book on C would be best, because the OS is written in C. But, now I'm not sure because I read that gcc can compile C++ too (so, I'm assuming C++ must get used too). > > > > Does it even matter? > > > > Suggestions? > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 15:43:58 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DB02916A4CE for ; Mon, 10 Nov 2003 15:43:58 -0800 (PST) Received: from Gina.esfm.ipn.mx (esfm.ipn.mx [148.204.102.61]) by mx1.FreeBSD.org (Postfix) with ESMTP id 618FA43FCB for ; Mon, 10 Nov 2003 15:43:55 -0800 (PST) (envelope-from mrspock@Gina.esfm.ipn.mx) Received: from Gina.esfm.ipn.mx (localhost [127.0.0.1]) by Gina.esfm.ipn.mx (8.12.9p1/8.12.9) with ESMTP id hAANhe4I024390 for ; Mon, 10 Nov 2003 17:43:40 -0600 (CST) (envelope-from mrspock@Gina.esfm.ipn.mx) Received: from localhost (mrspock@localhost)hAANhdja024384 for ; Mon, 10 Nov 2003 17:43:40 -0600 (CST) Date: Mon, 10 Nov 2003 17:43:38 -0600 (CST) From: Eduardo Viruena Silva To: freebsd-questions@freebsd.org In-Reply-To: <20031110165645.W14914@Gina.esfm.ipn.mx> Message-ID: <20031110174310.J24265@Gina.esfm.ipn.mx> References: <20031110165645.W14914@Gina.esfm.ipn.mx> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Spam-Status: No, hits=-2.0 required=5.0 tests=EMAIL_ATTRIBUTION,IN_REP_TO,REFERENCES,REPLY_WITH_QUOTES version=2.55 X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) Subject: Re: ep0 lost in FreeBSD 5.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 23:43:59 -0000 On Mon, 10 Nov 2003, Eduardo Viruena Silva wrote: > > Hello Pals! > > While installing FreeBSD 5.1-RELEASE in an old Pentium II > computer I lost any contact with my 3com509 nic. > > I reinstalled FreeBSD 5.0 and it worked again, > but I would like to use FreeBSD 5.1. > > WHAT IS HAPPENING? > > Will "ep" stop functioning in FreeBSD 5.1-RELEASE? > It works fine with FreeBSD 5.0-RELEASE p7. > Sorry Pals! I disable ACPI and everything worked ok. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 15:46:36 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9CF2316A4CE for ; Mon, 10 Nov 2003 15:46:36 -0800 (PST) Received: from pd5mo2so.prod.shaw.ca (shawidc-mo1.cg.shawcable.net [24.71.223.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1ACB743FE5 for ; Mon, 10 Nov 2003 15:46:31 -0800 (PST) (envelope-from peepstein@canada.com) Received: from pd5mr1so.prod.shaw.ca (pd5mr1so-qfe3.prod.shaw.ca [10.0.141.232]) by l-daemon (iPlanet Messaging Server 5.2 HotFix 1.18 (built Jul 28 2003)) with ESMTP id <0HO500B27TVA54@l-daemon> for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 16:42:46 -0700 (MST) Received: from pn2ml8so.prod.shaw.ca (pn2ml8so-qfe0.prod.shaw.ca [10.0.121.152]) by l-daemon (iPlanet Messaging Server 5.2 HotFix 1.18 (built Jul 28 2003)) with ESMTP id <0HO500EWQTVAEZ@l-daemon> for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 16:42:46 -0700 (MST) Received: from interface.larch.local (h24-80-23-243.vc.shawcable.net [24.80.23.243]) by l-daemon (iPlanet Messaging Server 5.2 HotFix 1.18 (built Jul 28 2003)) with ESMTP id <0HO500I37TV843@l-daemon> for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 16:42:46 -0700 (MST) Date: Mon, 10 Nov 2003 15:42:52 -0800 From: Edward Epstein In-reply-to: <200311102021.hAAEsKd0009294@nic.fnni.com> To: "Chirhart, Brian" , freebsd-questions@freebsd.org Message-id: <200311101542.52564.peepstein@canada.com> MIME-version: 1.0 Content-type: text/plain; charset=windows-1252 Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: KMail/1.5.4 X-Special: Have a nice day! References: <200311102021.hAAEsKd0009294@nic.fnni.com> Subject: Re: Mount SMB share on bootup X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: peepstein@canada.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 10 Nov 2003 23:46:36 -0000 Lines prefixed with ">" are what Chirhart, Brian wrote. >>> point is password protected (on the XP side) so I am prompted for a >>> password. How can I automate that? Or should I create the share without > >a > >>> password? I am not too worried about internal security so the share > >could > >>> have no password and that would be fine. >> >>Create a script called whatever.sh, chmod +x 755 whatever.sh and put that >>script in a /usr/local/etc/rc.d. >> >>Put the following lines in that script >> >>#!/bin/sh >>smbmount username=user password=pass and the rest of the parametars that > >you > >>are normaly using when mounting smb partition. >> >>Mind that if your startup script for samba is samba.sh your mounting script >>must start with a letter after the letter s otherwise you would mounting a >>samba share without smb daemon started. > >################################ > >When I try the smbmount I get a "command not Found" > >I checked the man pages on mount and found mount_smbfs, but I can not find >any options that would allow me to specify a username and password. > >I am not using Samba (at least I didn't load it... may be there by >default???) - To map the drive I have a line in my /etc/fstab file that >reads: > ># Device #Mountpoint FSType OPtion >//user@server/share /ftproot smbfs rw.nosuto 0 0 > >Once the server boots, I type "mount /ftproot" and then it asks me for the >password for User. After the password is entered, /ftproot contains the >contents of the share on my XP system. It was one of the things that I fell >in love with about BSD - the ability to "see" XP shares with no special >"magic". > >So anyway - I think there are several different approaches to this. Can I >modify my fstab file so that "auto" would work by somehow specifing a >password? Or is there a password option that I am missing in the mount or >mount_smbfs commands? OR... is there a reason I don't have the smbmount >command? You are on the right track; it took me a while to figure this one out too. You've got your /etc/fstab file set up correctly. This is how the line for me looks, it's just like yours. //EDWARD@CHAOS/SHARE /mnt/chaos smbfs rw,noauto 0 0 To specify your username and password for the mount, you should create /etc/nsmb.conf the syntax for this file is shown in /usr/share/examples/smbfs/dot.nsmbrc Here is an example from my machine: #nsmb.conf [CHAOS] addr=10.0.3.3 [CHAOS:EDWARD] password=XXXXXXXXX Finally, to mount on bootup, create a file in /usr/local/etc/rc.d with the following contents (or something similar; you probably didn't name your share CHAOS): -edward@interface$ more /usr/local/etc/rc.d/010.chaos.sh #! /bin/sh case "$1" in start) echo " Mounting CHAOS..." mount /mnt/CHAOS &>2 ;; stop) echo " Unmounting CHAOS..." umount /mnt/CHAOS &>2 ;; esac Also, I make sure my /etc/nsmb.conf file is owned by root and chmod'ed 600 because it contains a password in plaintext. Don't forget to make sure that your file in /usr/local/etc/rc.d is chmodded at least 700 so that it's executable by, at the very least, the owner (should be root). I hope this is clear enough to make some sense to you. Regards, Ed >Thank you for all your help! >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- "There are people who cheat on their spouse but not at cards, and vice versa, and both and neither. Reputation is not necessarily portable from one situation to another, and it's not easily expressed." --Clay Shirkey. (http://www.shirky.com/writings/group_enemy.html) "It has been said that man is a rational animal. All my life I have been searching for evidence which could support this." --Bertrand Russell. "The American empire is ideological, not territorial. We are the most ideological people in the world, and we are so united in our view that we don't understand there can be other views." --Lt. Gen. William Odom, ret. (Former Director of NSA). From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 16:02:36 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0DC6516A4CE for ; Mon, 10 Nov 2003 16:02:36 -0800 (PST) Received: from mail-in.m-online.net (svr8.m-online.net [62.245.150.237]) by mx1.FreeBSD.org (Postfix) with ESMTP id 42DF643F3F for ; Mon, 10 Nov 2003 16:02:34 -0800 (PST) (envelope-from h@schmalzbauer.de) Received: from mail.m-online.net (svr14.m-onlne.net [192.168.3.144]) by svr8.m-online.net (Postfix) with ESMTP id CB3B7F55; Tue, 11 Nov 2003 01:02:32 +0100 (CET) Received: from cale.flintsbach.schmalzbauer.de (ppp-62-245-232-4.mnet-online.de [62.245.232.4]) by mail.m-online.net (Postfix) with ESMTP id 85401169F0; Tue, 11 Nov 2003 01:02:27 +0100 (CET) From: Harald Schmalzbauer To: Daniela , questions@freebsd.org Date: Tue, 11 Nov 2003 01:02:24 +0100 User-Agent: KMail/1.5.4 References: <200311102312.20529.dgw@liwest.at> In-Reply-To: <200311102312.20529.dgw@liwest.at> X-Birthday: 06 Oktober 1972 X-Name: Harald Schmalzbauer X-Phone1: +49 (0) 163 555 3237 X-Phone2: +49 (0) 89 18947781 X-Address: Munich, 80686 X-Country: Germany MIME-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg=pgp-sha1; boundary="Boundary-02=_VcCs/7dxp/izq9y"; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Message-Id: <200311110102.30057@harrymail> Subject: Re: Is the swap partition really required for a live FS CD-ROM? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 00:02:36 -0000 --Boundary-02=_VcCs/7dxp/izq9y Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Description: signed data Content-Disposition: inline On Tuesday 11 November 2003 00:12, Daniela wrote: > Hi all, I'm creating a Knoppix-like FreeBSD release (live filesystem, runs > from CD) with 4.9 sources. I'm almost done, but I don't know what to do > with swap. I read somewhere that I must have a swap partition in my > /etc/fstab, can't this requirement be overridden? =46rom -current NOTES (don't have 4.9 arround): Disable swapping of upages and stack pages. This option removes all code which actually performs swapping, so it's not possible to turn it back on at run-time. This is sometimes usable for systems which don't have any swap space (see also sysctls "vm.defer_swapspace_pageouts" and "vm.disable_swapspace_pageouts") options NO_SWAPPING But I think I used exactly that option when I did my embedded BSD more than= =20 one year ago. Best regards, =2DHarry > And can I create a vn0 device now, and mount it as a filesystem of type > union over / so all directories appear writable? If I do this, is there > some way to save these written files (preferably into a single compressed > file on a floppy or USB memory stick) and restore them on the next boot? > > Please help me, I'm really stuck here. > Daniela > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" --Boundary-02=_VcCs/7dxp/izq9y Content-Type: application/pgp-signature Content-Description: signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQA/sCcVBylq0S4AzzwRAhn3AJ9zvySzSprN2FAj/Gd5BynUrg8VQACdEMzp uaRzISogv4aYYhrpBAknBtg= =j+uW -----END PGP SIGNATURE----- --Boundary-02=_VcCs/7dxp/izq9y-- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 16:12:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ED68316A4CE for ; Mon, 10 Nov 2003 16:12:16 -0800 (PST) Received: from ms-smtp-02-eri0.southeast.rr.com (ms-smtp-02-lbl.southeast.rr.com [24.25.9.101]) by mx1.FreeBSD.org (Postfix) with ESMTP id C37AB43F85 for ; Mon, 10 Nov 2003 16:12:15 -0800 (PST) (envelope-from wegster@mindcore.net) Received: from mindcore.net (rdu163-100-105.nc.rr.com [24.163.100.105]) hAB0CCLQ019537; Mon, 10 Nov 2003 19:12:12 -0500 (EST) Message-ID: <3FB0295C.70602@mindcore.net> Date: Mon, 10 Nov 2003 19:12:12 -0500 From: Scott W User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.5) Gecko/20031007 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Alex Kelly References: <00f201c3a7dc$40706fa0$6400a8c0@desktop> In-Reply-To: <00f201c3a7dc$40706fa0$6400a8c0@desktop> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine cc: freebsd-questions@freebsd.org Subject: Re: Another Newbie Question: C or C++ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 00:12:17 -0000 Alex Kelly wrote: >I need to buy a book on C or C++ to help me in FreeBSD. Which would be better to buy? > >I first thought a book on C would be best, because the OS is written in C. But, now I'm not sure because I read that gcc can compile C++ too (so, I'm assuming C++ must get used too). > >Does it even matter? > >Suggestions? >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > It depends on your goals. I used to teach both C and C++, and now years later, am currently hard pressed to find a non-Microsoft C/C++ development position. If for personal knowledge, definitely C followed by C++. If professional, or want to be....hmm. In that case, I'd say it still depends more on your goals- if you're going to try to stay in *nix development, you've GOT to know C. If you don't care, or God help you, want a job doing Windows development, start with C++, and ignore all of the standard data types because MS will make their own for you ;-) Starting with C has an advantage in that you tend to have to do 'most of the work yourself' for a lot of things, which tends to help you understand more about how things work. IMHO, that also tends to make better programmers down the line, regardless of the language they use. C++ is similar, but STL will make life easier when it comes to data structures. Java I don't want to talk about ;-) A significant amount of system level programming(think system processes and services/daemons) are written in C. A fair number of applications are, but the majority of GNOME/KDE apps, if that's a consideration, are done in C++. A growing number of applications are also being done in Java, but it's not the best language to start with for understanding much of anything (you can write a half dozen lines of Java to replace perhaps 100+ in C/C++ from scratch in some cases). It isn't a bad language to learn (professional-wise as well, *groan*) after learning C or C++. Books and references- C- Already mentioned, K&R 'The C Programming Language' is 'the bible.' This is also generally a lousy book to start with if you aren't programming already, but an invaluable reference. Pick up another book, wish I knew a good starter one, but it's been a while...can try Deitel and Deitel or (nobody laugh, have used it for Intro before..) the 21 days SAMs series for a 'jump-start,' and THEN the Deitel/Deitel and K&R. W. Richard Stevens "Advanced Programming in the UNIX Environment"- MUST HAVE. I may be misquoting the name, but a search on bookpool.com , bn.com (or search on amazon then BUY somewhere else!) will quickly turn it up. K&R is to the C language, Stevens is to Unix programming... google search for 'Secure Unix Programming'- there's a FAQ or two out there that are pretty good once you're past 'the basics.' C++ Latest edition of Deitel/Deitel. Funny, I used to really dislike their books, but they DO provide pretty decent overall coverage. May or may not be 'too deep' at first, if so, preface with SAMs or equivalent. Stroustrup- 'The C++ Programming Language". Stroustrup write C++ but is pretty dry. Good reference and for advanced topics. Stroustrup- Annoted Reference Manual AKA 'the ARM'- what K&R is to C. *The C++ Standard Library : A Tutorial and Reference- recommended pretty highly, but don't currently have. search on favorite bookstore will turn it up. *Java (before ya ask ;-) There are a LOT of bad books on Java it seems. Deitel and Deitel again is worth buying as a first book (after C and/or C++), then decide what you want to DO with Java, as there are a number of directions- JDBC, Beans, JSP, etc etc etc.. As always, languages and books can be a moving target- when possible, pick up the latest edition covering the current ANSI standard for C/C++, and make sure anything you buy for Java covers 'Java 2,' preferably JDK 1.4, but at least 1.3 or you'll be throwing out work by the time you work on a current project.. Misc others- POSIX Programming, O'Reilly press. Good coverage of POSIX (Unix for simplicity's sake but not really) required system calls. Network Programming- Again,m by Stevens. FAQs for whatever you wind up taking an interest in. I don't _like_ GUI development, but KDE and GNOME have a fair number of tutorials for QT and GTK respectively... Scott From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 17:27:55 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 328E516A4CE for ; Mon, 10 Nov 2003 17:27:55 -0800 (PST) Received: from fed1mtao01.cox.net (fed1mtao01.cox.net [68.6.19.244]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4089B43FBD for ; Mon, 10 Nov 2003 17:27:54 -0800 (PST) (envelope-from brently@bjwcs.com) Received: from SAMBA ([68.98.26.35]) by fed1mtao01.cox.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with ESMTP id <20031111012749.MKQF3322.fed1mtao01.cox.net@SAMBA>; Mon, 10 Nov 2003 20:27:49 -0500 From: "Brent Wiese" To: "'Chris'" , Date: Mon, 10 Nov 2003 18:32:29 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.5510 In-Reply-To: <200311081931020867.1D98ED59@cp4.myhostdns.org> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Thread-Index: AcOmYVqvDZyC7BqDSZy4Svm4RxXaeQBkFTNw Message-Id: <20031111012749.MKQF3322.fed1mtao01.cox.net@SAMBA> Subject: RE: JAIL can't FTP ports? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 01:27:55 -0000 In addition to Rus' comments: > 1) Can I use FTP to install ports or packages without going > through sysinstall? Yes, and to me, this seems the smarter way to do it. You can "pkg_add -r" to your hearts content, or, if you want all the ports (which I prefer over packages myself), use "fetch" to grab the latest ports.tar.gz and unzip it. > 2) If not, is there any other way to get the entire ports > collection into the jail, without actually being at the console? SSH in and do the fetch I mentioned above. > And if I create a jail from a system with no ports, does that > mean the jail will have no ports? And if my system has the > entire ports collection installed, will a new jail also have them? I do not believe (I could be wrong, I've only done jail setups once) that when you create the jail it does not install the ports tree whether its on your box or not. However, if you want to avoid the bandwidth hit of fetching the ports.tar.gz, you could copy it over from the master into the jail/ports dir. If its an old ports.tar.gz, then you can cvsup it from inside the jail... I found this link to be superb when setting up jails for the first time: http://www.onlamp.com/pub/a/bsd/2003/09/04/jails.html Brent From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 17:44:31 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9DA3E16A513 for ; Mon, 10 Nov 2003 17:44:31 -0800 (PST) Received: from tmgcon.com (tmgcon.com [128.121.216.20]) by mx1.FreeBSD.org (Postfix) with ESMTP id DF48343FAF for ; Mon, 10 Nov 2003 17:44:30 -0800 (PST) (envelope-from gentoo@tmgcon.com) Received: from kereru.tmgcon1.co.nz (203-96-105-52.dialup.xtra.co.nz [203.96.105.52]) by tmgcon.com (8.12.10/8.12.6) with ESMTP id hAB1iSRl040712 for ; Tue, 11 Nov 2003 01:44:29 GMT Received: from gentoo (unknown [192.168.0.64]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (No client certificate requested) by kereru.tmgcon1.co.nz (Postfix) with ESMTP id 78558CFDE for ; Tue, 11 Nov 2003 13:53:25 +1300 (NZDT) From: Tom Munro Glass To: freebsd-questions@freebsd.org Date: Tue, 11 Nov 2003 13:53:20 +1300 User-Agent: KMail/1.5.4 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311111353.20210.gentoo@tmgcon.com> Subject: Newbie: Correct directory for file server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 01:44:31 -0000 On an intranet file server, the users' private files are obviously stored in /usr/home/username but where is the correct place to store files that are common to many users? Would this be something like /usr/home/public or /usr/local/public or even /var/public? Thanks, Tom Munro Glass From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:16:55 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D0BF216A4CE for ; Mon, 10 Nov 2003 18:16:55 -0800 (PST) Received: from lsh142.siteprotect.com (lsh142.siteprotect.com [66.113.130.215]) by mx1.FreeBSD.org (Postfix) with ESMTP id E028A44053 for ; Mon, 10 Nov 2003 18:16:51 -0800 (PST) (envelope-from you@aredumb.com) Received: (from aredumb@localhost) by lsh142.siteprotect.com (8.11.6/8.11.6) id hAB2GoI17849 for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 20:16:50 -0600 Date: Mon, 10 Nov 2003 18:16:50 -0800 From: you@aredumb.com (Will Yardley) To: freebsd-questions@freebsd.org Message-ID: <20031111021649.GA17409@aredumb.com> Mail-Followup-To: you@aredumb.com (Will Yardley), freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i Subject: problems with FreeBSD telnet client X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:16:55 -0000 I've asked this before (a long while back), but never got a response. When I telnet to a Cisco device from a FreeBSD machine, I get this error: jazz% telnet somerouterorswitch Password: Kerberos: No default realm defined for Kerberos! Assuming you don't use Kerberos, is there a way to make the telnet client not attempt to use it to authenticate? From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:20:18 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A9D4916A4D6 for ; Mon, 10 Nov 2003 18:20:12 -0800 (PST) Received: from mail.seekingfire.com (coyote.seekingfire.com [24.72.10.212]) by mx1.FreeBSD.org (Postfix) with ESMTP id D84E743FAF for ; Mon, 10 Nov 2003 18:20:11 -0800 (PST) (envelope-from tillman@seekingfire.com) Received: from blues.seekingfire.prv (blues.seekingfire.prv [192.168.23.211]) by mail.seekingfire.com (Postfix) with ESMTP id 1ACC6269 for ; Mon, 10 Nov 2003 20:20:11 -0600 (CST) Received: (from tillman@localhost) by blues.seekingfire.prv (8.11.6/8.11.6) id hAB2KBg16321 for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 20:20:11 -0600 Date: Mon, 10 Nov 2003 20:20:10 -0600 From: Tillman Hodgson To: freebsd-questions@freebsd.org Message-ID: <20031110202010.F16032@seekingfire.com> References: <20031111021649.GA17409@aredumb.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20031111021649.GA17409@aredumb.com>; from you@aredumb.com on Mon, Nov 10, 2003 at 06:16:50PM -0800 X-Urban-Legend: There is lots of hidden information in headers Subject: Re: problems with FreeBSD telnet client X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:20:19 -0000 On Mon, Nov 10, 2003 at 06:16:50PM -0800, Will Yardley wrote: > I've asked this before (a long while back), but never got a response. > > When I telnet to a Cisco device from a FreeBSD machine, I get this > error: > > jazz% telnet somerouterorswitch > Password: Kerberos: No default realm defined for Kerberos! > > Assuming you don't use Kerberos, is there a way to make the telnet > client not attempt to use it to authenticate? Sure, two possible solutions: * Set up your Cisco devices to use Kerberos * Check out the -K option in the telnet man page -T -- "Robert Metcalf [the inventor of Ethernet] says that if something comes along to replace Ethernet, it will be called ``Ethernet'', so therefore Ethernet will never die. Unix has already undergone several such transformations." -- Ken Thompson From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:32:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5922F16A4CE for ; Mon, 10 Nov 2003 18:32:38 -0800 (PST) Received: from lsh142.siteprotect.com (lsh142.siteprotect.com [66.113.130.215]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9D3A343F93 for ; Mon, 10 Nov 2003 18:32:37 -0800 (PST) (envelope-from you@aredumb.com) Received: (from aredumb@localhost) by lsh142.siteprotect.com (8.11.6/8.11.6) id hAB2WbM21903 for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 20:32:37 -0600 Date: Mon, 10 Nov 2003 18:32:37 -0800 From: you@aredumb.com (Will Yardley) To: freebsd-questions@freebsd.org Message-ID: <20031111023237.GA19869@aredumb.com> Mail-Followup-To: you@aredumb.com (Will Yardley), freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i Subject: Re: problems with FreeBSD telnet client X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:32:38 -0000 On Mon, Nov 10, 2003 at 06:16:50PM -0800, Will Yardley wrote: [ Sorry for the lack of proper references / in-reply-to headers; I'm not subbed to the list, and I didn't get sent a copy ] > > When I telnet to a Cisco device from a FreeBSD machine, I get this > > error: > > > > jazz% telnet somerouterorswitch > > Password: Kerberos: No default realm defined for Kerberos! > > > > Assuming you don't use Kerberos, is there a way to make the telnet > > client not attempt to use it to authenticate? > Sure, two possible solutions: > > * Set up your Cisco devices to use Kerberos > > * Check out the -K option in the telnet man page Any other possibilities? I guess I could alias telnet to "telnet -K", but then it won't automatically use my username if I telnet to another machine. I took a quick look through the telnet source, but didn't see any obvious options to simply build it without kerberos support. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:32:51 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 52F1C16A4CE for ; Mon, 10 Nov 2003 18:32:51 -0800 (PST) Received: from smtp09.wxs.nl (smtp09.wxs.nl [195.121.6.38]) by mx1.FreeBSD.org (Postfix) with ESMTP id 481CF43FAF for ; Mon, 10 Nov 2003 18:32:50 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp09.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO6006QC1K56N@smtp09.wxs.nl> for freebsd-questions@freebsd.org; Tue, 11 Nov 2003 03:28:53 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAB2V3Qb005213; Tue, 11 Nov 2003 03:31:03 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAB2V2tG005212; Tue, 11 Nov 2003 03:31:03 +0100 (CET envelope-from akruijff) Date: Tue, 11 Nov 2003 03:31:02 +0100 From: Alex de Kruijff In-reply-to: <200311111353.20210.gentoo@tmgcon.com> To: Tom Munro Glass Message-id: <20031111023102.GC559@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <200311111353.20210.gentoo@tmgcon.com> cc: freebsd-questions@freebsd.org Subject: Re: Newbie: Correct directory for file server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:32:51 -0000 On Tue, Nov 11, 2003 at 01:53:20PM +1300, Tom Munro Glass wrote: > On an intranet file server, the users' private files are obviously stored in > /usr/home/username but where is the correct place to store files that are > common to many users? Would this be something like /usr/home/public or > /usr/local/public or even /var/public? > > Thanks, There is no default. You can choice your own directory. Placing this in the /usr slice or on a second disk seems reasable. /var wouldn't be advisable. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:38:08 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 81A1616A4CE for ; Mon, 10 Nov 2003 18:38:08 -0800 (PST) Received: from hotmail.com (law9-f42.law9.hotmail.com [64.4.9.42]) by mx1.FreeBSD.org (Postfix) with ESMTP id E925B43FB1 for ; Mon, 10 Nov 2003 18:38:07 -0800 (PST) (envelope-from exhausted01@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 10 Nov 2003 18:38:07 -0800 Received: from 209.42.38.167 by lw9fd.law9.hotmail.msn.com with HTTP; Tue, 11 Nov 2003 02:38:06 GMT X-Originating-IP: [209.42.38.167] X-Originating-Email: [exhausted01@hotmail.com] From: "yo _" To: alexkelly@adelphia.net Date: Mon, 10 Nov 2003 21:38:06 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 11 Nov 2003 02:38:07.0512 (UTC) FILETIME=[D6E03180:01C3A7FC] cc: freebsd-questions@freebsd.org Subject: Re: Another Newbie Question: C or C++ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:38:08 -0000 >>I need to buy a book on C or C++ to help me in FreeBSD. Which would be >>better to buy? If you just want to start programming in FreeBSD, Learn C as well as you can. The route I took was learning basic programming skills then reading "The C Programming Language" by K&R, it's an excellent book if you are already very familiar with the computer and have some basic programming skills (make sure you know your c development enviroment and how to use gcc). The book is so great because not only does it teach C syntax, the examples open your mind to writing simple and efficient code in a C style, and it even has a small UNIX programming tutorial toward the end (on how to implement some of the standard library functions in a UNIX system). That book and a good familiarity with the man pages is really all you need to get started coding on FreeBSD. If you are still a little lost and really want to go on the quick route to good BSD programming, read "UNIX Network Programming" by W. Richard Stevens. The original edition introduces you to good fundamental knowledge of the UNIX system and archictecture (process model, system calls, and IPC) then it goes right to socket programming which is a must to know especially in this day and age. The later editions seperate the actual socket programming from the unix stuff but go intensely in depth. That's why i'm fonder of the first edition, concise and smart. >> >>I first thought a book on C would be best, because the OS is written in C. >>But, now I'm not sure because I read that gcc can compile C++ too (so, I'm >>assuming C++ must get used too). Now that you've had good practice with C and UNIX programming, learning libraries (GTK, QT, pthreads, GD to name a few) is simply a matter of reference and learning any other language else is simply a matter of syntax and style, and everything will come very easy. If you haven't learned C++ by that point just figure out what Object Oriented programming is (it'll beautify your life), get a reference book, look at some coding examples, and no sweat. Java? Perl? Python? Javascript? Visual Basic (haha)? They'll all just be minor changes in syntax and style when in comes to C/C++ (except for python, hah). Hope that helps and good luck! -Rian Hunter _________________________________________________________________ MSN Messenger with backgrounds, emoticons and more. http://www.msnmessenger-download.com/tracking/cdp_customize From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:39:06 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id AD0A416A4CF for ; Mon, 10 Nov 2003 18:39:06 -0800 (PST) Received: from lsh142.siteprotect.com (lsh142.siteprotect.com [66.113.130.215]) by mx1.FreeBSD.org (Postfix) with ESMTP id 39C8443FB1 for ; Mon, 10 Nov 2003 18:39:05 -0800 (PST) (envelope-from you@aredumb.com) Received: (from aredumb@localhost) by lsh142.siteprotect.com (8.11.6/8.11.6) id hAB2d4r23341 for freebsd-questions@freebsd.org; Mon, 10 Nov 2003 20:39:04 -0600 Date: Mon, 10 Nov 2003 18:39:04 -0800 From: you@aredumb.com (Will Yardley) To: Message-ID: <20031111023904.GB19869@aredumb.com> Mail-Followup-To: you@aredumb.com (Will Yardley), References: <20031111021649.GA17409@aredumb.com> <002801c3a7fa$c35cd750$1200a8c0@gsicomp.on.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <002801c3a7fa$c35cd750$1200a8c0@gsicomp.on.ca> User-Agent: Mutt/1.4i Subject: Re: problems with FreeBSD telnet client X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:39:06 -0000 Matthew Emmerton wrote: > > When I telnet to a Cisco device from a FreeBSD machine, I get this > > error: > > > > jazz% telnet somerouterorswitch > > Password: Kerberos: No default realm defined for Kerberos! > > > > Assuming you don't use Kerberos, is there a way to make the telnet > > client not attempt to use it to authenticate? > I have a feeling that this is coming from the telnet server (ie, the Cisco > box), since no such text shows up in the FreeBSD telnet client sources our > our Kerberos-[45] libraries. (4-STABLE, cvsup'd just a few minutes ago.) > > Perhaps the Cisco box has Kerberos support, and since it senses that the > FreeBSD telnet client is Kerberos-aware, it spews out this warning to notify > you of the server misconfiguration? Yeah - I was guessing that that was the problem. I was hoping there was a way to get the telnet client not to try to use Kerberos, but sounds like "-K" may be the closest thing to that. Checked out some of the options at: http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_command_summary_chapter09186a00800880ac.html but don't see anything that will help. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:47:25 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E976916A4CF for ; Mon, 10 Nov 2003 18:47:25 -0800 (PST) Received: from bmyster.com (loqtis.bmyster.com [65.162.190.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 749BE43FE1 for ; Mon, 10 Nov 2003 18:47:24 -0800 (PST) (envelope-from shawn@guillemette.org) Received: from tacstation (66-63-96-2.metrocast.net [66.63.96.2]) by bmyster.com (8.12.9p2/8.12.10) with SMTP id hAB2rUqj097514 for ; Mon, 10 Nov 2003 21:54:02 -0500 (EST) Message-ID: <006201c3a7ff$a9b227b0$6701a8c0@tacstation> From: "Shawn Guillemette" To: Date: Mon, 10 Nov 2003 21:57:47 -0500 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: ipfw question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:47:26 -0000 Looking at ipfw show=20 63000 0 0 deny log logamount 100 udp from any to any 119 via = sis0 63000 24 1152 deny log logamount 100 tcp from any to any 135 via = sis0 63000 0 0 deny log logamount 100 udp from any to any 135 via = sis0 63000 is the rule number correct? IM wondering what the other 2 places are..=20 24 and 1152 Are they inbound and outbound? Do I make any sence? There is no place like 127.0.0.1 From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 18:52:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 623E116A4CE for ; Mon, 10 Nov 2003 18:52:22 -0800 (PST) Received: from tmgcon.com (tmgcon.com [128.121.216.20]) by mx1.FreeBSD.org (Postfix) with ESMTP id ACA0243FE3 for ; Mon, 10 Nov 2003 18:52:21 -0800 (PST) (envelope-from gentoo@tmgcon.com) Received: from kereru.tmgcon1.co.nz (203-96-105-52.dialup.xtra.co.nz [203.96.105.52]) by tmgcon.com (8.12.10/8.12.6) with ESMTP id hAB2qJhw054194 for ; Tue, 11 Nov 2003 02:52:20 GMT Received: from gentoo (unknown [192.168.0.64]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (No client certificate requested) by kereru.tmgcon1.co.nz (Postfix) with ESMTP id 91A4DCFDE for ; Tue, 11 Nov 2003 15:52:28 +1300 (NZDT) From: Tom Munro Glass To: freebsd-questions@freebsd.org Date: Tue, 11 Nov 2003 15:52:23 +1300 User-Agent: KMail/1.5.4 References: <200311111353.20210.gentoo@tmgcon.com> <20031111023102.GC559@dds.nl> In-Reply-To: <20031111023102.GC559@dds.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311111552.23084.gentoo@tmgcon.com> Subject: Re: Newbie: Correct directory for file server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 02:52:22 -0000 On Tue, 11 Nov 2003 15:31, Alex de Kruijff wrote: > On Tue, Nov 11, 2003 at 01:53:20PM +1300, Tom Munro Glass wrote: > > On an intranet file server, the users' private files are obviously stored > > in /usr/home/username but where is the correct place to store files that > > are common to many users? Would this be something like /usr/home/public > > or /usr/local/public or even /var/public? > > > > Thanks, > > There is no default. You can choice your own directory. Placing this in > the /usr slice or on a second disk seems reasable. /var wouldn't be > advisable. I guessed there isn't a default, but I thought there might be a convention for this and I want to follow conventions where ever possible. Tom Munro Glass From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 19:19:45 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id EA71916A4CE for ; Mon, 10 Nov 2003 19:19:45 -0800 (PST) Received: from mta7.adelphia.net (mta7.adelphia.net [68.168.78.193]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1ED7C43FE1 for ; Mon, 10 Nov 2003 19:19:45 -0800 (PST) (envelope-from andi_payn@speedymail.org) Received: from [10.1.0.9] ([68.65.235.109]) by mta7.adelphia.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with ESMTP id <20031111031948.GJYB19413.mta7.adelphia.net@[10.1.0.9]> for ; Mon, 10 Nov 2003 22:19:48 -0500 From: andi payn To: freebsd-questions@freebsd.org Content-Type: text/plain Message-Id: <1068520779.3935.41.camel@verdammt.falcotronic.net> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Mon, 10 Nov 2003 19:19:43 -0800 Content-Transfer-Encoding: 7bit Subject: Reading non-installed man pages, etc. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 03:19:46 -0000 I'd occassionally like to be able to read manpages from somewhere other than the MANPATH. Let me give you two concrete examples of things that I can do on linux, that I don't know how to do on FreeBSD $ man /mnt/falco3/usr/share/man/man1/ls.1.bz2 $ man /home/andi/foo/doc/foo.1 In the first case, I'm looking at the manpages exported (over NFS) from a Mandrake linux box; in the second, I'm looking at the manpages for a program I'm trying to get installed. First, FreeBSD's man doesn't seem to accept a full pathname. In the first case, I can get around this with MANPATH or -M ("man -M/mnt/falco3/usr/share/man ls"), but in the second, that won't help. Second, FreeBSD's man doesn't handle bz2 compression. I suppose I could do something like this: $ bzcat /mnt/falco3/usr/share/man/man1/ls.1.bz2 | groff -man -Tascii -mtty-char | less And I could write scripts to wrap this up (figure out whether to use bzcat, zcat, or cat; whether we're talking to a tty-char-capable terminal or something else; which charset to use; what pager to use; etc.). Basically, it'd do everything man is doing except for finding the page in the MANPATH and dealing with catfiles, which sounds like a bit of a duplication of effort. So, if this is already done somewhere, or there's an way that I've missed to make man or some other tool do what I want, I'd rather not reinvent the wheel. Also, I seem to remember installing GNU's *roff stuff onto a Solaris box and having a program that let me do 90% of what I want to do. The groff(1) manpage has a reference to groffer that sounds like it might be what I'm remembering, but I can't find any more information about it (or the program itself). Another alternative would be porting the GNU man (with the bzip2 patches), but I'm not sure this is a good idea (I don't know if it would require other stuff to be ported, for example; also, the name "gman" is already taken for a Gtk+ xman-type program). Any ideas? Thanks. From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 20:10:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8E6EB16A4D5 for ; Mon, 10 Nov 2003 20:10:18 -0800 (PST) Received: from mxsf21.cluster1.charter.net (mxsf21.cluster1.charter.net [209.225.28.221]) by mx1.FreeBSD.org (Postfix) with ESMTP id 6427F43F93 for ; Mon, 10 Nov 2003 20:10:17 -0800 (PST) (envelope-from ralphdewitt@charter.net) Received: from 192.168.2.100 (66-214-31-61.lb-cres.charterpipeline.net [66.214.31.61])hAB481Xc052817 for ; Mon, 10 Nov 2003 23:08:01 -0500 (EST) (envelope-from ralphdewitt@charter.net) From: "Ralph F. De Witt" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 20:08:46 -0800 User-Agent: KMail/1.5.4 MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Description: clearsigned data Content-Disposition: inline Message-Id: <200311102008.49106.ralphdewitt@charter.net> Subject: Two Preinstall Questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 04:10:22 -0000 =2D----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi: I have two questions before I plunge in and make my first FreeBSD install. Normally I keep a back up copy of all my data in a ReiserFS formated partion on my hard drive. When I do a Linux Distribution install I will reformat the non back up partions and then restore my data by copying from the backup partion. Will I be able to do this with my FreeBSD install? Will FreeBSD be able to mount and read write data from this Linux Reiserfs formated partion? My second question is hardware related. Is the Logitech 4000 Pro USB Web camera supported in FreeBSD? Thanks very much for your help. =2D --=20 Ralph ************************************************************** Libranet Linux: version 2.8.1 2.4.21 kernel ralphfdewitt on Yahoo and Aim, ralphdewitt on Jabber Signed and Encrypted Mail Encouraged ************************************************************** =2D----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/sGDOu29DXA3iCF0RAnSSAJ9avbYViii80EPOhEoSW750ysMf1ACfdlwo yvUMwalj/dJz73MnHH8SVxw=3D =3DHuSF =2D----END PGP SIGNATURE----- From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 21:33:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 985E016A4CE for ; Mon, 10 Nov 2003 21:33:38 -0800 (PST) Received: from typhoon.enabled.com (typhoon.enabled.com [216.218.220.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1DF2B43F75 for ; Mon, 10 Nov 2003 21:33:38 -0800 (PST) (envelope-from admin2@enabled.com) Received: from enabled.com (localhost.enabled.com [127.0.0.1]) by typhoon.enabled.com (8.12.10/8.12.10) with ESMTP id hAB5XaN7015601 for ; Mon, 10 Nov 2003 21:33:36 -0800 (PST) (envelope-from admin2@enabled.com) From: "Noah" To: freebsd-questions@freebsd.org Date: Mon, 10 Nov 2003 21:33:36 -0800 Message-Id: <20031111053154.M67107@enabled.com> X-Mailer: Open WebMail 2.01 20030425 X-OriginatingIP: 64.121.33.4 (admin2) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Subject: ImageMagick not building X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 05:33:38 -0000 FreeBSD 4.8 Stable A little off topic, but... ImageMagick is not building from /usr/ports any clue what installation libintl.so.2 library is part of? I am not quite sure why I dont have it on my machine. here is the tail of the output form the Build: ---- snip ----- X11 Configuration: X_CFLAGS = -I/usr/X11R6/include X_PRE_LIBS = -lSM -lICE X_LIBS = -L/usr/X11R6/lib X_EXTRA_LIBS = Options used to compile and link: CC = cc CFLAGS = -O -pipe -march=pentiumpro -Wall CPPFLAGS = -I/usr/local/include/freetype2 -I/usr/local/include -I/usr/X11R6/in clude -I/X11 -I/usr/local/include/libxml2 CXX = c++ CXXFLAGS = -O -pipe -march=pentiumpro LDFLAGS = -L/usr/local/lib -L/usr/X11R6/lib -L/usr/local/lib -L/usr/local/lib LIBS = -ljbig -llcms -ltiff -lfreetype -ljasper -ljpeg -lpng -lfpx -lwmfli te -ldpstk -ldps -lXt -lXext -lSM -lICE -lX11 -lbz2 -lxml2 -lz -lm ===> Building for ImageMagick-5.5.7.11_1 /usr/libexec/ld-elf.so.1: Shared object "libintl.so.2" not found *** Error code 1 Stop in /usr/ports/graphics/ImageMagick. ----- snip ------ From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 22:27:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 973CD16A4CF for ; Mon, 10 Nov 2003 22:27:22 -0800 (PST) Received: from xmxpita.excite.com (nn7.excitenetwork.com [207.159.120.61]) by mx1.FreeBSD.org (Postfix) with ESMTP id D03D543FE3 for ; Mon, 10 Nov 2003 22:27:20 -0800 (PST) (envelope-from sundog2000@excite.com) Received: by xmxpita.excite.com (Postfix, from userid 110) id 1F2818AEDE; Tue, 11 Nov 2003 01:27:20 -0500 (EST) To: FreeBSD-Questions@FreeBSD.ORG Received: from [68.50.51.235] by xprdmailfe2.nwk.excite.com via HTTP; Tue, 11 Nov 2003 01:27:20 EST X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: ID = c8ce77626d96cf702829a9802c577231 From: "Nick P." MIME-Version: 1.0 X-Sender: sundog2000@excite.com X-Mailer: PHP Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <20031111062720.1F2818AEDE@xmxpita.excite.com> Date: Tue, 11 Nov 2003 01:27:20 -0500 (EST) Subject: Installation Hang X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: sundog2000@excite.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 06:27:22 -0000 I am a first-time user who is having a nightmare installing FreeBSD. I've tried several different methods, but my installation hangs at various points during the installation. Often during the extraction of bin (11% seems to be a popular time) sometimes later in the bin extraction. Sometimes during the ports, and sometimes during the docs. I've tried from CD, booting from floppies and then using FTP (a variety of FTP servers), booting from floppies then using the CD. All in all I've probably started the install about 20 times in the past two days. It seems to be a common problem based on what I've found by googling (look for "Extracting bin into /") : but I haven't found an answer. This is really frustrating because I see so many other people that had the problem, without finding an answer. One person had the ftp install work after the cd install hung, but this is not the case for me. And I left the installation running the first time, for like 8 hours; it wasn't a matter of not letting it do its thing. During the install I can switch to other consoles, but after it hangs it doesn't seem to let me. I'm at my wits end and if I could figure out how to simply remove the boot loader I wouldn't be far from giving up and moving on to another OS. Specs: PIII 733 Mhz 384 MB Ram 120 GB HD, w/ a windows partition already on it Also, when I begin a CD install, after it hangs, it strangely won't boot to the cd-rom anymore. After I boot to the FreeBSD floppies, and that install fails, I can then boot from the cd-rom again. Please advise. -Nick _______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web! From owner-freebsd-questions@FreeBSD.ORG Mon Nov 10 23:34:52 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D7A3A16A4CE for ; Mon, 10 Nov 2003 23:34:52 -0800 (PST) Received: from hotmail.com (law11-f17.law11.hotmail.com [64.4.17.17]) by mx1.FreeBSD.org (Postfix) with ESMTP id 377D943FEC for ; Mon, 10 Nov 2003 23:34:52 -0800 (PST) (envelope-from weiwuzhang@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 10 Nov 2003 23:34:52 -0800 Received: from 218.17.187.76 by lw11fd.law11.hotmail.msn.com with HTTP; Tue, 11 Nov 2003 07:34:51 GMT X-Originating-IP: [218.17.187.76] X-Originating-Email: [weiwuzhang@hotmail.com] From: "Zhang Weiwu" To: freebsd-questions@freebsd.org Date: Tue, 11 Nov 2003 15:34:51 +0800 Mime-Version: 1.0 Content-Type: text/plain; charset=gb2312; format=flowed Message-ID: X-OriginalArrivalTime: 11 Nov 2003 07:34:52.0033 (UTC) FILETIME=[4B327F10:01C3A826] Subject: newbie: vi - go to previous file X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 07:34:53 -0000 Hello. I am using the BSD's vi not vim. I learned from :exusage that :N is to swich to the next file in argument list while :P swich to the previous file. :N woks fine, while :P does nothing. Say, I run ">vi file1 file2", which opens file1, :N begin to edit file2, then I press :P, I thought I should go to file1, but I'm still editing file2. Thank you. _________________________________________________________________ ÓëÁŠŧúĩÄÅóÓŅ―øÐÐ―ŧÁũĢŽĮëĘđÓà MSN Messenger: http://messenger.msn.com/cn From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 00:06:20 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A086C16A4CF for ; Tue, 11 Nov 2003 00:06:20 -0800 (PST) Received: from smtp5.jaring.my (smtp5.jaring.my [61.6.32.55]) by mx1.FreeBSD.org (Postfix) with ESMTP id 58E2443FDD for ; Tue, 11 Nov 2003 00:06:18 -0800 (PST) (envelope-from ksham@pd.jaring.my) Received: from webmail1.jaring.my ([61.6.32.100]) by smtp5.jaring.my (8.12.10/8.12.10) with ESMTP id hAB86FVB035917 for ; Tue, 11 Nov 2003 16:06:16 +0800 (MYT) (envelope-from ksham@pd.jaring.my) Received: (from www@localhost) by webmail1.jaring.my (8.12.9p2/8.12.9/Submit) id hAB86AjY051828 for freebsd-questions@freebsd.org; Tue, 11 Nov 2003 16:06:10 +0800 (MYT) (envelope-from ksham@pd.jaring.my) Received: from 219.95.132.88 ([219.95.132.88]) by webmail.jaring.my (IMP) with HTTP for ; Tue, 11 Nov 2003 16:06:09 +0800 Message-ID: <1068537969.3fb09871f36cc@webmail.jaring.my> Date: Tue, 11 Nov 2003 16:06:09 +0800 From: Norhisham Khalil To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 8bit User-Agent: JARING Webmail v1.2 (http://www.jaring.my) X-Originating-IP: 219.95.132.88 Subject: kernel error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 08:06:20 -0000 i have error message on my samba server on freebsd 5.1 FreeBSD bsdbro.fc.com 5.1-RELEASE-p2 FreeBSD 5.1-RELEASE-p2 #1: Sun Aug 24 16:48:49 MYT 2003 root@bsdbro.fc.com:/usr/obj/usr/src/sys/BSDKING i386 kernel: psmintr: delay too long; reseting byte count kernel: psmintr: out of sync (0008 != 0000). kernel: psmintr: discard a byte (1) is this a sign of deteriorating harddisk? or i need to tweak syscontrol? sham khalil ---------------------------------------------------------------- This e-mail has been sent via JARING webmail at http://www.jaring.my From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 00:41:32 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BED9F16A4CE; Tue, 11 Nov 2003 00:41:32 -0800 (PST) Received: from mail.vinita.lt (mail.vinita.lt [217.147.34.8]) by mx1.FreeBSD.org (Postfix) with ESMTP id AA45343FD7; Tue, 11 Nov 2003 00:41:31 -0800 (PST) (envelope-from rolnas@takas.lt) Received: from ctv-217-147-36-211.vinita.lt ([217.147.36.211] helo=rolnas.linux) by mail.vinita.lt with esmtp (powered by Init) id 1AJUB1-0004Jz-00; Tue, 11 Nov 2003 10:47:07 +0200 Received: from rolnas by rolnas.linux with local (Exim 3.35 #1 (Debian)) id 1AJU5Z-0000mh-00; Tue, 11 Nov 2003 10:41:29 +0200 Date: Tue, 11 Nov 2003 10:41:29 +0200 From: Rolandas Naujikas To: hardware@freebsd.org, questions@freebsd.org Message-ID: <20031111084128.GA2883@rolnas> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline User-Agent: Mutt/1.3.28i Organization: VU MIF Sender: Rolandas Naujikas Subject: serial ports from additional old IDE ISA card X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 08:41:32 -0000 I'm tried to poke into ISA slot additional old IDE card (from old 486 computer) with serials and paralell ports. With jumpers on it I'm disabled IDE, floppy and parallel port. I'm tried to use only serial ports, configured at I/O location of COM3 and COM4 ports and IRQ 5 and IRQ 9. When tried to boot FreeBSD 4.8-RELEASE with GENERIC kernel and enabled sio2 devices, I see sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio0 and sio1 are from mainbord. sio2 could be from my additional card. Can I make possible to work this card as additional serials ports ? P.S. Sorry for my English. From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 01:01:02 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 13E4B16A4CE for ; Tue, 11 Nov 2003 01:01:02 -0800 (PST) Received: from mail1.arcor-ip.de (mail1.arcor-ip.de [145.253.2.10]) by mx1.FreeBSD.org (Postfix) with ESMTP id 409CD43FB1 for ; Tue, 11 Nov 2003 01:01:01 -0800 (PST) (envelope-from Lutz.Kittler@sse-erfurt.de) Received: from mail.sse-erfurt.de (145.253.64.194) by mail1.arcor-ip.de (5.5.034) id 3FA84F3B000AE3AB for freebsd-questions@freebsd.org; Tue, 11 Nov 2003 10:00:59 +0100 Received: from master.sse-erfurt.de (mailhost.sse-erfurt.de [192.105.75.4]) by mail.sse-erfurt.de (Postfix) with ESMTP id D90F512C7B for ; Tue, 11 Nov 2003 10:00:58 +0100 (CET) Received: from tycho.sse-erfurt.de (kittler@tycho.sse-erfurt.de [192.105.75.11])id KAA16603 for ; Tue, 11 Nov 2003 10:00:58 +0100 From: Lutz Kittler To: freebsd-questions@freebsd.org Date: Tue, 11 Nov 2003 10:00:57 +0100 User-Agent: KMail/1.5 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311111000.57933.Lutz.Kittler@sse-erfurt.de> Subject: Mesa port X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 09:01:02 -0000 Hi, whats going on with Port: Mesa-3.4.2_2 Path: /usr/ports/graphics/Mesa3 It is deleted in ports database,but many packages ( eg. kde* ) depend on this port. So portupgrade brings up many errors. What to do ? Lutz From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 01:48:37 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4DF3816A4CE for ; Tue, 11 Nov 2003 01:48:37 -0800 (PST) Received: from station188.com (station188.com [203.194.198.182]) by mx1.FreeBSD.org (Postfix) with SMTP id EA3A843FE1 for ; Tue, 11 Nov 2003 01:48:31 -0800 (PST) (envelope-from dhull@digitaloverload.net) Received: (qmail 13190 invoked by uid 501); 11 Nov 2003 09:49:37 -0000 Message-ID: <20031111094937.12606.qmail@station188.com> From: "=?iso-8859-1?B?ZGh1bGw=?=" To: freebsd-questions@freebsd.org Date: Tue, 11 Nov 2003 09:49:37 +0000 MIME-Version: 1.0 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: WebMail 2.2 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: base64 X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: gathering data in cacti X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: =?iso-8859-1?B?ZGh1bGw=?= List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 09:48:37 -0000 SSBhbSB0cnlpbmcgdG8gY29uZmlndXJlIGNhY3RpIGZvbGxvd2luZyB0aGUgaW5zdHJ1Y3Rpb25z IGluIHRoZSBPY3RvYmVyIGlzc3VlIG9mIExpbnV4IE1hZ2F6aW5lLiBTbyBmYXIgaGVyZSBpcyB3 aGF0IEkgaGF2ZS4NCg0KMS4gSW5zdGFsbGVkIHJyZCB0b29sIGZyb20gcG9ydHMNCjIuIFB1dCBj YWN0aSBpbiBteSB3ZWIgcm9vdA0KMy4gQ29uZmlndXJlZCBjYWN0aSBhY2NvcmRpbmcgdG8gZG9j cw0KNC4gSSBhbSB1c2luZyAmcXVvdDsqLzUgKiAqICogKiB3Z2V0IC1PIC0gaHR0cDovL2xvY2Fs aG9zdDo4MS9jYWN0aS9jbWQucGhwICZndDsgL2Rldi9udWxsIDImZ3Q7JmFtcDsxJnF1b3Q7IGlu IG15IGNyb250YWIgdG8gcnVuICZxdW90O2NtZC5waHAmcXVvdDsuIFNvbWUgaG93IHRoaXMgZ29l cyBvdXQgYW5kIHVwZGF0ZXMgdGhlIGdyYXBocyBpbiBjYWN0aS4NCg0KVEhFIFBST0JMRU0NClRo ZSBncmFwaHMgc2hvdyB1cCBpbiBjYWN0aSBidXQgdGhlcmUncyBubyBkYXRhLiBJIHRoaW5rIHRo aXMgaGFzIHNvbWV0aGluZyB0byBkbyB3aXRoIHRoZSB3YXkgTGludXggYW5kIEZyZWVCU0QgdXMg JnF1b3Q7L3Byb2MmcXVvdDsuIEknbSBub3QgcmVhbGx5IHN1cmUuDQoNCkFsbCBJIGtub3cgaXMg dGhhdCB0aGVyZSBpcyBubyBkYXRhIGluIG15IGdyYXBocy4gDQoNClFVRVNUSU9ODQpIb3cgZG8g SSBjb25maWd1cmUgY2FjdGkgdG8gZ2V0IGRhdGEgaW50byB0aGUgZ3JhcGhzPwo= From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 02:44:32 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 4FE1316A4D0 for ; Tue, 11 Nov 2003 02:44:32 -0800 (PST) Received: from highland.isltd.insignia.com (highland.isltd.insignia.com [195.74.141.1]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9777F43FDD for ; Tue, 11 Nov 2003 02:44:30 -0800 (PST) (envelope-from subscriber@insignia.com) Received: from dailuaine.isltd.insignia.com (dailuaine.isltd.insignia.com [172.16.64.11])hABAiSHw040237 for ; Tue, 11 Nov 2003 10:44:28 GMT (envelope-from subscriber@insignia.com) Received: from tomatin (tomatin [172.16.64.128])hABAiSSX000997 for ; Tue, 11 Nov 2003 10:44:28 GMT (envelope-from subscriber@insignia.com) From: Jim Hatfield To: freebsd-questions@freebsd.org Date: Tue, 11 Nov 2003 10:44:28 +0000 Organization: Insignia Solutions Message-ID: <3le1rv85dgvlb689e76shkqabf5bn4ecok@4ax.com> X-Mailer: Forte Agent 1.91/32.564 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable X-Scanned-By: MIMEDefang 2.38 Subject: Any way to lock down disk errors? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 10:44:32 -0000 Strictly speaking OT but the machine is running FreeBSD. While copying a file I got I/O errors. The console shows: >ad0: hard error cmd=3Dread fsbn 31891359 of 31891359-31891486 = status=3D59 error=3D40 >ad0: hard error cmd=3Dread fsbn 31891231 of 31891231-31891486 = status=3D59 error=3D40 Given that the disk is just under three months old, is it worth doing anything other than getting it replaced? I have no other disk big enough to old the data on it so unless the supplier sends me a replacement ahead of me returning the faulty one it will be a pain. I have enough space to empty the partition with the error in, but I couldn't find anything in newfs or fsck which would let me map out selected blocks or to do a full write test of each block and map out bad ones. Is there such a beast? From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 02:51:37 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id ED5E416A4CE for ; Tue, 11 Nov 2003 02:51:37 -0800 (PST) Received: from ms-smtp-03-eri0.southeast.rr.com (ms-smtp-03-lbl.southeast.rr.com [24.25.9.102]) by mx1.FreeBSD.org (Postfix) with ESMTP id CF69B43FE0 for ; Tue, 11 Nov 2003 02:51:36 -0800 (PST) (envelope-from wegster@mindcore.net) Received: from mindcore.net (rdu163-100-105.nc.rr.com [24.163.100.105]) hABApXOi024662; Tue, 11 Nov 2003 05:51:34 -0500 (EST) Message-ID: <3FB0BF36.4030002@mindcore.net> Date: Tue, 11 Nov 2003 05:51:34 -0500 From: Scott W User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.5) Gecko/20031007 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Tom Munro Glass References: <200311111353.20210.gentoo@tmgcon.com> <20031111023102.GC559@dds.nl> <200311111552.23084.gentoo@tmgcon.com> In-Reply-To: <200311111552.23084.gentoo@tmgcon.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: Symantec AntiVirus Scan Engine cc: freebsd-questions Subject: Re: Newbie: Correct directory for file server X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 10:51:38 -0000 Tom Munro Glass wrote: >On Tue, 11 Nov 2003 15:31, Alex de Kruijff wrote: > > >>On Tue, Nov 11, 2003 at 01:53:20PM +1300, Tom Munro Glass wrote: >> >> >>>On an intranet file server, the users' private files are obviously stored >>>in /usr/home/username but where is the correct place to store files that >>>are common to many users? Would this be something like /usr/home/public >>>or /usr/local/public or even /var/public? >>> >>>Thanks, >>> >>> >>There is no default. You can choice your own directory. Placing this in >>the /usr slice or on a second disk seems reasable. /var wouldn't be >>advisable. >> >> > >I guessed there isn't a default, but I thought there might be a convention for >this and I want to follow conventions where ever possible. > >Tom Munro Glass > > > Depends on what philosophy you subscribe to- if it's on a local system only, then create a group for members that will need access to it, and create a directory in the /home tree, like /home/'project_foo If it's going to be NFS mounted by other systems, then create an /export directory and put it similarly in there, which has the convenience as you change your filesystems (and you will...) and perhaps share more directories, or add more disk, you can keep them 'centrally' located (or mounted) under a single top level directory.. Unless your /var filesystem is _huge_ (or on the same filesystem as /, ick!), I wouldn't put anything to be shared in the /var tree...(as already mentioned). Likewise, /usr is meant to be capable of being mounted read-only, and contains (generally) static binaries and libraries required for full multi-user (read this as networked) mode operation of the system, so I'd abstain from using /usr either. Scott From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 03:36:11 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 070C716A4CE for ; Tue, 11 Nov 2003 03:36:11 -0800 (PST) Received: from rutger.owt.com (rutger.owt.com [204.118.6.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 16E8843F75 for ; Tue, 11 Nov 2003 03:36:10 -0800 (PST) (envelope-from kstewart@owt.com) Received: from topaz-out (owt-207-41-94-233.owt.com [207.41.94.233]) by rutger.owt.com (8.11.6p2/8.9.3) with ESMTP id hABBa2u12868; Tue, 11 Nov 2003 03:36:05 -0800 From: Kent Stewart To: "Noah" , freebsd-questions@freebsd.org Date: Tue, 11 Nov 2003 03:35:59 -0800 User-Agent: KMail/1.5.4 References: <20031111053154.M67107@enabled.com> In-Reply-To: <20031111053154.M67107@enabled.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311110335.59878.kstewart@owt.com> Subject: Re: ImageMagick not building X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 11:36:11 -0000 On Monday 10 November 2003 09:33 pm, Noah wrote: > FreeBSD 4.8 Stable > > A little off topic, but... > > ImageMagick is not building from /usr/ports any clue what installation > libintl.so.2 library is part of? I am not quite sure why I dont have it on > my machine. Your port system seems to have an out of date reference for gettext. You must not have cvsuped ports-all recently. The curent version is gettext-0.12.1. It has a different interface and you need to rebuild everything that uses gettext. The library is up to something like so.5 right now. Kent > > here is the tail of the output form the Build: > > > ---- snip ----- > > X11 Configuration: > X_CFLAGS = -I/usr/X11R6/include > X_PRE_LIBS = -lSM -lICE > X_LIBS = -L/usr/X11R6/lib > X_EXTRA_LIBS = > > Options used to compile and link: > CC = cc > CFLAGS = -O -pipe -march=pentiumpro -Wall > CPPFLAGS = -I/usr/local/include/freetype2 -I/usr/local/include > -I/usr/X11R6/in clude -I/X11 -I/usr/local/include/libxml2 > CXX = c++ > CXXFLAGS = -O -pipe -march=pentiumpro > LDFLAGS = -L/usr/local/lib -L/usr/X11R6/lib -L/usr/local/lib > -L/usr/local/lib LIBS = -ljbig -llcms -ltiff -lfreetype -ljasper -ljpeg > -lpng -lfpx -lwmfli te -ldpstk -ldps -lXt -lXext -lSM -lICE -lX11 -lbz2 > -lxml2 -lz -lm > > ===> Building for ImageMagick-5.5.7.11_1 > /usr/libexec/ld-elf.so.1: Shared object "libintl.so.2" not found > *** Error code 1 > > Stop in /usr/ports/graphics/ImageMagick. > > > ----- snip ------ > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 03:42:37 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2F3AF16A4CE for ; Tue, 11 Nov 2003 03:42:37 -0800 (PST) Received: from bunce.bitecomm.co.uk (bunce.bitecomm.co.uk [217.206.61.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id CD20F43F3F for ; Tue, 11 Nov 2003 03:42:35 -0800 (PST) (envelope-from alex.shaw@bulletonline.com) Received: from zaphod ([193.82.143.118]) by bunce.bitecomm.co.uk (Lotus Domino Release 5.0.12) with SMTP id 2003111111411438:76226 ; Tue, 11 Nov 2003 11:41:14 +0000 From: "Alex Shaw" To: Date: Tue, 11 Nov 2003 11:41:26 -0000 Message-ID: MIME-Version: 1.0 X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4925.2800 Importance: Normal X-MIMETrack: Itemize by SMTP Server on bunce.bitecomm.co.uk/Bite/GB(Release 5.0.12 |February 13, 2003) at 11/11/2003 11:41:14,|February 13, 2003) at 11/11/2003 11:41:18, Serialize complete at 11/11/2003 11:41:18 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="iso-8859-1" Subject: backups and devices X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: alex.shaw@bulletonline.com List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 11:42:37 -0000 Hi, Im trying to decide on a sutable backup procedure for the systems we use. Id like if possible to use a auto mount multiple tape device, that can completly store and retrieve all nesecary data as quickly as possible. There are two locations one needs only data backup, systems are not as important here, as rebuilding from scratch and applying data restore is a lot more feasible, the second location will need full system backups as well as data. Im looking to achieve this with maybe two tape devices. My question is this, What is the best way to go about this, eg what tape devices fitting these specs are known to work well with BSD, what software would easily help me do the backup and restore ?. Im newish to BSD systems admin and am trying to minimise the learning mistakes but getting as much info as possible before I start implementing anything. Thanks in advance for any help Alex From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 03:52:12 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 69B7316A4CE for ; Tue, 11 Nov 2003 03:52:12 -0800 (PST) Received: from ptb-mailc04.plus.net (ptb-mailc04.plus.net [212.159.14.210]) by mx1.FreeBSD.org (Postfix) with ESMTP id E1CD643F93 for ; Tue, 11 Nov 2003 03:52:10 -0800 (PST) (envelope-from simong@desktop-guardian.com) Received: from [81.174.227.186] (helo=desktop-guardian.com) by ptb-mailc04.plus.net with smtp (Exim 4.12) id 1AJX44-0003Pl-00 for freebsd-questions@freebsd.org; Tue, 11 Nov 2003 11:52:08 +0000 Received: (qmail 16433 invoked by uid 1006); 11 Nov 2003 11:52:17 -0000 Received: from simong@desktop-guardian.com by dtg25 by uid 82 with qmail-scanner-1.16 (clamscan: 0.54. spamassassin: 2.55. Clear:. Processed in 13.022949 secs); 11 Nov 2003 11:52:17 -0000 Received: from unknown (HELO dtg17) (192.168.0.17) by 192.168.0.25 with SMTP; 11 Nov 2003 11:52:02 -0000 Message-ID: <01a201c3a84a$10aa5330$1100a8c0@dtg17> From: "Simon Gray" To: "Noah" , References: <20031111053154.M67107@enabled.com> Date: Tue, 11 Nov 2003 11:50:55 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: Re: ImageMagick not building X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 11:52:12 -0000 > ===> Building for ImageMagick-5.5.7.11_1 > /usr/libexec/ld-elf.so.1: Shared object "libintl.so.2" not found > *** Error code 1 > > Stop in /usr/ports/graphics/ImageMagick. I had a similar problem quite a while ago, its easily fixed tho go in to 'cd /usr/local/lib' and do 'ls -la libintl*' you should have something like libintl.so or libintl.so.4 or libintl.so.5 all you need to do is create a symlink from the libintl.so library to libintl.so.2 so do 'ln -s libintl.so.5 libintl.so.2' (change the libintl.so.5 to the appropirate from the previous ls) From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 04:00:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E9E2E16A4CF for ; Tue, 11 Nov 2003 04:00:13 -0800 (PST) Received: from fep3.cogeco.net (smtp.cogeco.net [216.221.81.25]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0E2ED43FE0 for ; Tue, 11 Nov 2003 04:00:13 -0800 (PST) (envelope-from pnmurphy@cogeco.ca) Received: from earth.upton.net (d141-18-230.home.cgocable.net [24.141.18.230]) by fep3.cogeco.net (Postfix) with SMTP id 7102A1789 for ; Tue, 11 Nov 2003 07:00:11 -0500 (EST) Date: Tue, 11 Nov 2003 07:00:00 -0500 From: Paul Murphy To: FreeBSD Questions Message-Id: <20031111070000.4ae9be3c.pnmurphy@cogeco.ca> X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd4.9) User-Agent: X-Face: -Q/~XHbe$z/a List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 12:00:14 -0000 X-List-Received-Date: Tue, 11 Nov 2003 12:00:14 -0000 X-List-Received-Date: Tue, 11 Nov 2003 12:00:14 -0000 --Signature=_Tue__11_Nov_2003_07_00_00_-0500_BUe9XxcvC7SLE6YH Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Content-Transfer-Encoding: 7bit I have installed emulators/linux_base-8 and graphics/linux_dri but /compat/linux/usr/X11R6/bin/glxinfo reports: [earth] /root: /compat/linux/usr/X11R6/bin/glxinfo /compat/linux/usr/X11R6/bin/glxinfo: error while loading shared libraries: libstdc++-libc6.1-2.so.3: cannot open shared object file: No such file or directory Have I missed installing some other port? p.s. Native DRI is installed and works fine. -- Cogeco ergo sum --Signature=_Tue__11_Nov_2003_07_00_00_-0500_BUe9XxcvC7SLE6YH Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/sM9LTv5Mxsi/WPMRAhU5AKCSNzsTyqQwdU3V4xFvz4OqjkAeMgCfYzzi n7xJzfGFl5y6vaTjXLMSEhQ= =xjtJ -----END PGP SIGNATURE----- --Signature=_Tue__11_Nov_2003_07_00_00_-0500_BUe9XxcvC7SLE6YH-- From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 04:01:23 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8267F16A4CE for ; Tue, 11 Nov 2003 04:01:23 -0800 (PST) Received: from ptb-mailc05.plus.net (ptb-mailc05.plus.net [212.159.14.211]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8EE4B43F75 for ; Tue, 11 Nov 2003 04:01:22 -0800 (PST) (envelope-from simong@desktop-guardian.com) Received: from [81.174.227.186] (helo=desktop-guardian.com) by ptb-mailc05.plus.net with smtp (Exim 4.12) id 1AJXCz-0006Dw-00 for freebsd-questions@freebsd.org; Tue, 11 Nov 2003 12:01:21 +0000 Received: (qmail 16516 invoked by uid 1006); 11 Nov 2003 12:01:30 -0000 Received: from simong@desktop-guardian.com by dtg25 by uid 82 with qmail-scanner-1.16 (clamscan: 0.54. spamassassin: 2.55. Clear:. Processed in 11.329687 secs); 11 Nov 2003 12:01:30 -0000 Received: from unknown (HELO dtg17) (192.168.0.17) by 192.168.0.25 with SMTP; 11 Nov 2003 12:01:17 -0000 Message-ID: <01ae01c3a84b$5bb0c1b0$1100a8c0@dtg17> From: "Simon Gray" To: "Shawn Guillemette" , References: <006201c3a7ff$a9b227b0$6701a8c0@tacstation> Date: Tue, 11 Nov 2003 12:00:10 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: Re: ipfw question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 12:01:23 -0000 >63000 0 0 deny log logamount 100 udp from any to any 119 via sis0 >63000 24 1152 deny log logamount 100 tcp from any to any 135 via sis0 >63000 0 0 deny log logamount 100 udp from any to any 135 via sis0 >63000 is the rule number correct? >IM wondering what the other 2 places are.. >24 and 1152 if you're getting 0 on the other rules, it probably means its not running those rules. So therefore it won't actually log if it isn't get to that rule. also from the looks of things, if you're trying to block windows filesharing/smb you might want to block 135 - 139 both tcp/udp (instead of specifiying 135 in the rule add '135-139') rather than just 135 tcp/udp >Are they inbound and outbound? well depends (could be both yes), anything thats aimed at tcp 135 will be denied and logged >Do I make any sence? Not really :/ whats the question? From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 04:06:52 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 490EA16A4CE for ; Tue, 11 Nov 2003 04:06:52 -0800 (PST) Received: from gwdu60.gwdg.de (gwdu60.gwdg.de [134.76.8.60]) by mx1.FreeBSD.org (Postfix) with ESMTP id 462B443FB1 for ; Tue, 11 Nov 2003 04:06:50 -0800 (PST) (envelope-from kheuer2@gwdg.de) Received: from gwdu60.gwdg.de (localhost [127.0.0.1]) by gwdu60.gwdg.de (8.12.8p1/8.12.8) with ESMTP id hABC6ncq049051; Tue, 11 Nov 2003 13:06:49 +0100 (CET) (envelope-from kheuer2@gwdg.de) Received: from localhost (kheuer2@localhost)hABC6mXV049048; Tue, 11 Nov 2003 13:06:48 +0100 (CET) X-Authentication-Warning: gwdu60.gwdg.de: kheuer2 owned process doing -bs Date: Tue, 11 Nov 2003 13:06:48 +0100 (CET) From: Konrad Heuer To: Zhang Weiwu In-Reply-To: Message-ID: <20031111130544.F28128@gwdu60.gwdg.de> References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII cc: freebsd-questions@freebsd.org Subject: Re: newbie: vi - go to previous file X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 12:06:52 -0000 On Tue, 11 Nov 2003, Zhang Weiwu wrote: > Hello. I am using the BSD's vi not vim. > > I learned from :exusage that :N is to swich to the next file in argument > list while :P swich to the previous file. :N woks fine, while :P does > nothing. > > Say, I run ">vi file1 file2", which opens file1, :N begin to edit file2, > then I press :P, I thought I should go to file1, but I'm still editing > file2. Try :prev - :p seems to be an abbreviation for a different command. Regards Konrad Heuer (kheuer2@gwdg.de) ____ ___ _______ GWDG / __/______ ___ / _ )/ __/ _ \ Am Fassberg / _// __/ -_) -_) _ |\ \/ // / 37077 Goettingen /_/ /_/ \__/\__/____/___/____/ Germany From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 04:13:56 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 934B716A4CF for ; Tue, 11 Nov 2003 04:13:56 -0800 (PST) Received: from ptb-mailc04.plus.net (ptb-mailc04.plus.net [212.159.14.210]) by mx1.FreeBSD.org (Postfix) with ESMTP id 55AB443FD7 for ; Tue, 11 Nov 2003 04:13:55 -0800 (PST) (envelope-from simong@desktop-guardian.com) Received: from [81.174.227.186] (helo=desktop-guardian.com) by ptb-mailc04.plus.net with smtp (Exim 4.12) id 1AJXP8-000P3q-00 for FreeBSD-Questions@FreeBSD.ORG; Tue, 11 Nov 2003 12:13:54 +0000 Received: (qmail 16642 invoked by uid 1006); 11 Nov 2003 12:14:03 -0000 Received: from simong@desktop-guardian.com by dtg25 by uid 82 with qmail-scanner-1.16 (clamscan: 0.54. spamassassin: 2.55. Clear:. Processed in 12.162931 secs); 11 Nov 2003 12:14:03 -0000 Received: from unknown (HELO dtg17) (192.168.0.17) by 192.168.0.25 with SMTP; 11 Nov 2003 12:13:50 -0000 Message-ID: <01b401c3a84d$1c7629c0$1100a8c0@dtg17> From: "Simon Gray" To: , References: <20031111062720.1F2818AEDE@xmxpita.excite.com> Date: Tue, 11 Nov 2003 12:12:43 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: Re: Installation Hang X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 12:13:56 -0000 > I'm at my wits end and if I could figure out how to simply remove the boot loader I wouldn't be far from giving up and >moving on to another OS. > > Specs: > PIII 733 Mhz > 384 MB Ram > 120 GB HD, w/ a windows partition already on it > > Also, when I begin a CD install, after it hangs, it strangely won't boot to the cd-rom anymore. After I boot to the >FreeBSD floppies, and that install fails, I can then boot from the cd-rom again. Hi Nick, Welcome to the world of freebsd :) You're problem looks interesting, what version of freebsd are you trying? Have you setup any swap space? if so how much? You can do this when you setup freebsd's. partitions. How big are the partitions you've assigned? is there enough space to install what you've choosen to install? Personally, i'd suggest doing a minimum install first, with say about 384 - 768meg swap (suggested is twice your ram), and a few gig on '/var' and '/usr' and a few hundered meg on '/' i've got an p3 866, with 512 meg of ram and 2x 20gig hdd's mirrored hdd my partitions are as follows: 1gig swap 264M / 264M /tmp 39G /usr 264M /var (although if I were to set that box up again, i'd assign more space to /var) Should you have enough of using freebsd, you should be able to clear your MBR (Master boot record)/freebsd boot loader by doing 'fdisk /mbr' from a dos boot disk Hope this helps, Simon From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 04:24:14 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 670B716A4CE for ; Tue, 11 Nov 2003 04:24:14 -0800 (PST) Received: from ptb-mailc05.plus.net (ptb-mailc05.plus.net [212.159.14.211]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8286F43F3F for ; Tue, 11 Nov 2003 04:24:13 -0800 (PST) (envelope-from simong@desktop-guardian.com) Received: from [81.174.227.186] (helo=desktop-guardian.com) by ptb-mailc05.plus.net with smtp (Exim 4.12) id 1AJXZ3-00007Q-00 for freebsd-questions@freebsd.org; Tue, 11 Nov 2003 12:24:09 +0000 Received: (qmail 16784 invoked by uid 1006); 11 Nov 2003 12:24:18 -0000 Received: from simong@desktop-guardian.com by dtg25 by uid 82 with qmail-scanner-1.16 (clamscan: 0.54. spamassassin: 2.55. Clear:. Processed in 13.168749 secs); 11 Nov 2003 12:24:18 -0000 Received: from unknown (HELO dtg17) (192.168.0.17) by 192.168.0.25 with SMTP; 11 Nov 2003 12:24:04 -0000 Message-ID: <01c401c3a84e$8a432ec0$1100a8c0@dtg17> From: "Simon Gray" To: "andi payn" , References: <1068520779.3935.41.camel@verdammt.falcotronic.net> Date: Tue, 11 Nov 2003 12:22:57 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: Re: Reading non-installed man pages, etc. X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 12:24:14 -0000 > I'd occassionally like to be able to read manpages from somewhere other > than the MANPATH. > Let me give you two concrete examples of things that I can do on linux, > that I don't know how to do on FreeBSD > > $ man /mnt/falco3/usr/share/man/man1/ls.1.bz2 > $ man /home/andi/foo/doc/foo.1 I'm not sure how man handles bz2. But for the other manpath, i guess you could do: echo "OPTIONAL_MANPATH /home/andi/foo/doc" >> /etc/manpath.config && makewhatis Hope this helps, Simon From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 04:35:53 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3ED8416A4CE for ; Tue, 11 Nov 2003 04:35:53 -0800 (PST) Received: from bmyster.com (loqtis.bmyster.com [65.162.190.7]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0F81D43F3F for ; Tue, 11 Nov 2003 04:35:52 -0800 (PST) (envelope-from shawn@guillemette.org) Received: from tacstation (66-63-96-2.metrocast.net [66.63.96.2]) by bmyster.com (8.12.9p2/8.12.10) with SMTP id hABCffqj000494; Tue, 11 Nov 2003 07:42:24 -0500 (EST) Message-ID: <000b01c3a851$de917d80$6701a8c0@tacstation> From: "Shawn Guillemette" To: "Simon Gray" , References: <006201c3a7ff$a9b227b0$6701a8c0@tacstation> <01ae01c3a84b$5bb0c1b0$1100a8c0@dtg17> Date: Tue, 11 Nov 2003 07:46:04 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: Re: ipfw question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 12:35:53 -0000 thank you.. Im realy only blocking 135 due to the MSBlaster and others... no Samba yet ----- Original Message ----- From: "Simon Gray" To: "Shawn Guillemette" ; Sent: Tuesday, November 11, 2003 7:00 AM Subject: Re: ipfw question > >63000 0 0 deny log logamount 100 udp from any to any 119 via > sis0 > >63000 24 1152 deny log logamount 100 tcp from any to any 135 via sis0 > >63000 0 0 deny log logamount 100 udp from any to any 135 via > sis0 > > >63000 is the rule number correct? > >IM wondering what the other 2 places are.. > >24 and 1152 > if you're getting 0 on the other rules, it probably means its not running > those rules. > So therefore it won't actually log if it isn't get to that rule. > > also from the looks of things, if you're trying to block windows > filesharing/smb you > might want to block 135 - 139 both tcp/udp (instead of specifiying 135 in > the rule add '135-139') > rather than just 135 tcp/udp > > >Are they inbound and outbound? > well depends (could be both yes), anything thats aimed at tcp 135 will be > denied and > logged > > >Do I make any sence? > > Not really :/ whats the question? > > From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 05:14:29 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 7F12316A4CE for ; Tue, 11 Nov 2003 05:14:29 -0800 (PST) Received: from cwe.compwest.com.au (computerwest.com.au [202.72.158.79]) by mx1.FreeBSD.org (Postfix) with ESMTP id 76AE343FBF for ; Tue, 11 Nov 2003 05:14:27 -0800 (PST) (envelope-from paul@bdug.org.au) Received: from mail.bdug.org.au (ant.parkview.compwest.com.au [202.72.147.43]) by cwe.compwest.com.au (8.12.6/8.12.6) with ESMTP id hABDEl8m002093 for ; Tue, 11 Nov 2003 21:14:48 +0800 (WST) (envelope-from paul@bdug.org.au) Received: from wks (wks.bdug.org.au [192.168.0.2]) by mail.bdug.org.au (Postfix) with SMTP id 50FEA5BA1 for ; Tue, 11 Nov 2003 21:14:20 +0800 (WST) From: "Paul Hamilton" To: "Freebsd-Questions" Date: Tue, 11 Nov 2003 21:14:23 +0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Importance: Normal Subject: How to find our what version of ports your running? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 13:14:29 -0000 Hi, Is it possible to print out the base version of when you last installed the ports base, or cvs'ed it? cheers, Paul Hamilton From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 05:43:29 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 727EF16A4CE; Tue, 11 Nov 2003 05:43:29 -0800 (PST) Received: from smtp06.wxs.nl (smtp06.wxs.nl [195.121.6.58]) by mx1.FreeBSD.org (Postfix) with ESMTP id 511B843FDD; Tue, 11 Nov 2003 05:43:28 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp06.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HO60009XWD9HY@smtp06.wxs.nl>; Tue, 11 Nov 2003 14:34:22 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hABDb7xC001156; Tue, 11 Nov 2003 14:37:07 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hABDb4OH001155; Tue, 11 Nov 2003 14:37:04 +0100 (CET envelope-from akruijff) Date: Tue, 11 Nov 2003 14:37:03 +0100 From: Alex de Kruijff In-reply-to: <20031110020045.GA3807@xor.obsecurity.org> To: Kris Kennaway Message-id: <20031111133703.GA454@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <3FAE5378.1030209@iweb.net.au> <20031109163224.GA1502@happy-idiot-talk.infracaninophile.co.uk> <20031110004959.GD553@dds.nl> <20031110010721.GB3060@xor.obsecurity.org> <20031110011256.GH553@dds.nl> <20031110011722.GA3207@xor.obsecurity.org> <20031110015325.GN77527@wantadilla.lemis.com> <20031110020045.GA3807@xor.obsecurity.org> cc: Greg 'groggy' Lehey cc: Andrew cc: freebsd-questions@FreeBSD.org Subject: Re: Instant-workstation is missing X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 13:43:29 -0000 On Sun, Nov 09, 2003 at 06:00:45PM -0800, Kris Kennaway wrote: > On Mon, Nov 10, 2003 at 12:23:25PM +1030, Greg 'groggy' Lehey wrote: > > > > instant-workstation is not included on cd#1. As stated, there isn't > > > enough space for everything. > > > > Instant-workstation itself is tiny. It consists of dependencies and a > > few small configuration files. It's mainly a matter of coordination > > with release engineering. > > The point is that including instant-workstation on the CD requires > that the CD also include everything it depends on, which are not tiny > and do not fit. It depends on acroread5, bash2, cdrtools, unix2dos, emacs20, fetchmail, gs, grip, gimp1, gv, gnupg, kde3, mkisofs, smbfs, mutt, mozilla, posfix, xtset, xmms, xv. The most ports are availble on CD as package including the largest port, kde3. The number of packages that are availble could be reason enove to include a instant-workstation package on the CD. This would save time looking up all the availeble packages and saves compilation time for someone who later decides to install the remaining ports. Availble as package on the CD rom are: acroread5, bash2, cdrtools, emacs20, fetchmail, gv, kde3, mkisofs, mutt, mozilla, posfix, xv Not available: unix2dos, grip, gnupg, smbfs, xtset, xmms Unkown to me: gs -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 05:54:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5FEE616A4CE for ; Tue, 11 Nov 2003 05:54:38 -0800 (PST) Received: from out006.verizon.net (out006pub.verizon.net [206.46.170.106]) by mx1.FreeBSD.org (Postfix) with ESMTP id 894C043FB1 for ; Tue, 11 Nov 2003 05:54:36 -0800 (PST) (envelope-from leblanc@keyslapper.org) Received: from keyslapper.org ([68.160.42.77]) by out006.verizon.net (InterMail vM.5.01.05.33 201-253-122-126-133-20030313) with ESMTP id <20031111135435.KNKU1413.out006.verizon.net@keyslapper.org> for ; Tue, 11 Nov 2003 07:54:35 -0600 Received: from keyslapper.org (localhost [127.0.0.1]) by keyslapper.org (8.12.8p1/8.12.8) with ESMTP id hABDsZ4Q000581 for ; Tue, 11 Nov 2003 08:54:36 -0500 (EST) (envelope-from leblanc@keyslapper.org) Received: (from leblanc@localhost) by keyslapper.org (8.12.8p1/8.12.8/Submit) id hABDsZvF000580 for freebsd-questions@freebsd.org; Tue, 11 Nov 2003 08:54:35 -0500 (EST) Date: Tue, 11 Nov 2003 08:54:35 -0500 From: Louis LeBlanc To: freebsd-questions@freebsd.org Message-ID: <20031111135435.GA396@keyslapper.org> Mail-Followup-To: freebsd-questions@freebsd.org References: <00f201c3a7dc$40706fa0$6400a8c0@desktop> <3FB0295C.70602@mindcore.net> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <3FB0295C.70602@mindcore.net> User-Agent: Mutt/1.5.4i X-Authentication-Info: Submitted using SMTP AUTH at out006.verizon.net from [68.160.42.77] at Tue, 11 Nov 2003 07:54:35 -0600 Subject: Re: Another Newbie Question: C or C++ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 13:54:38 -0000 On 11/10/03 07:12 PM, Scott W sat at the `puter and typed: > Alex Kelly wrote: > > >I need to buy a book on C or C++ to help me in FreeBSD. Which would be better to buy? > > > >I first thought a book on C would be best, because the OS is written in C. But, now I'm not sure because I read that gcc can compile C++ too (so, I'm assuming C++ must get used too). > > > >Does it even matter? > > > >Suggestions? > >_______________________________________________ > >freebsd-questions@freebsd.org mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > > > > > It depends on your goals. I used to teach both C and C++, and now years > later, am currently hard pressed to find a non-Microsoft C/C++ > development position. If for personal knowledge, definitely C followed > by C++. If professional, or want to be....hmm. In that case, I'd say > it still depends more on your goals- if you're going to try to stay in > *nix development, you've GOT to know C. If you don't care, or God help > you, want a job doing Windows development, start with C++, and ignore > all of the standard data types because MS will make their own for you ;-) > > Starting with C has an advantage in that you tend to have to do 'most of > the work yourself' for a lot of things, which tends to help you > understand more about how things work. IMHO, that also tends to make > better programmers down the line, regardless of the language they use. > C++ is similar, but STL will make life easier when it comes to data > structures. Java I don't want to talk about ;-) > > A significant amount of system level programming(think system processes > and services/daemons) are written in C. A fair number of applications > are, but the majority of GNOME/KDE apps, if that's a consideration, are > done in C++. A growing number of applications are also being done in > Java, but it's not the best language to start with for understanding > much of anything (you can write a half dozen lines of Java to replace > perhaps 100+ in C/C++ from scratch in some cases). It isn't a bad > language to learn (professional-wise as well, *groan*) after learning C > or C++. > > Books and references- > C- Already mentioned, K&R 'The C Programming Language' is 'the bible.' > This is also generally a lousy book to start with if you aren't > programming already, but an invaluable reference. Pick up another book, > wish I knew a good starter one, but it's been a while...can try Deitel > and Deitel or (nobody laugh, have used it for Intro before..) the 21 > days SAMs series for a 'jump-start,' and THEN the Deitel/Deitel and K&R. > > W. Richard Stevens "Advanced Programming in the UNIX Environment"- MUST > HAVE. I may be misquoting the name, but a search on bookpool.com , > bn.com (or search on amazon then BUY somewhere else!) will quickly turn > it up. K&R is to the C language, Stevens is to Unix programming... > > google search for 'Secure Unix Programming'- there's a FAQ or two out > there that are pretty good once you're past 'the basics.' > > C++ > Latest edition of Deitel/Deitel. Funny, I used to really dislike their > books, but they DO provide pretty decent overall coverage. May or may > not be 'too deep' at first, if so, preface with SAMs or equivalent. > > Stroustrup- 'The C++ Programming Language". Stroustrup write C++ but is > pretty dry. Good reference and for advanced topics. > Stroustrup- Annoted Reference Manual AKA 'the ARM'- what K&R is to C. > *The C++ Standard Library : A Tutorial and Reference- recommended pretty > highly, but don't currently have. search on favorite bookstore will > turn it up. > > *Java (before ya ask ;-) There are a LOT of bad books on Java it > seems. Deitel and Deitel again is worth buying as a first book (after C > and/or C++), then decide what you want to DO with Java, as there are a > number of directions- JDBC, Beans, JSP, etc etc etc.. > > As always, languages and books can be a moving target- when possible, > pick up the latest edition covering the current ANSI standard for C/C++, > and make sure anything you buy for Java covers 'Java 2,' preferably JDK > 1.4, but at least 1.3 or you'll be throwing out work by the time you > work on a current project.. > > Misc others- > POSIX Programming, O'Reilly press. Good coverage of POSIX (Unix for > simplicity's sake but not really) required system calls. > > Network Programming- Again,m by Stevens. > > FAQs for whatever you wind up taking an interest in. I don't _like_ GUI > development, but KDE and GNOME have a fair number of tutorials for QT > and GTK respectively... Wow, that's a fairly complete list. Agree completely on the C/C++ application/philosophical differences. The book list missed one very useful C++ book by Josutis, "The C++ Standard" I think. Don't have it handy. You know, everyone's been telling me to give up C and just start working with C++. I've been resisting pretty strongly, and now I realize why. C is a geeks language. It gives you more control than C++. I like C for one primary reason: I like to be in control. I know that many of the C++ constructs, member functions, etc. are slow in comparison to home grown vanilla construct in C that only do what they are needed for. The standard template classes use table lookups just to figure out what its contents look like. If you create the construct from scratch, it knows whether it's holding an int, char*, or struct. And the arguments about faster machines meaning that level of efficiency is unimportant will fall on deaf ears here. Efficiency should always be in the top 3 list (correctness, stability, and efficiency are the trinity of the true programmer). I'm gonna stop here because this is going to turn into a holy war shortly, but take Scott's description of the applications, availability, and books to heart. The only thing I can really add (for all my babbling here) is the Josutis book for C++. Lou -- Louis LeBlanc leblanc@keyslapper.org Fully Funded Hobbyist, KeySlapper Extrordinaire :) http://www.keyslapper.org ÔŋÔŽ Canada Bill Jones's Supplement: A Smith and Wesson beats four aces. From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 06:07:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 015EB16A4CE for ; Tue, 11 Nov 2003 06:07:19 -0800 (PST) Received: from mail.rz.uni-ulm.de (gemini.rz.uni-ulm.de [134.60.246.16]) by mx1.FreeBSD.org (Postfix) with ESMTP id 890C743FE5 for ; Tue, 11 Nov 2003 06:07:17 -0800 (PST) (envelope-from Siegbert.Baude@gmx.de) Received: from gmx.de (lilith.wh-wurm.uni-ulm.de [134.60.106.64]) by mail.rz.uni-ulm.de (8.12.10/8.12.10) with ESMTP id hABE3auE015780 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Tue, 11 Nov 2003 15:05:14 +0100 (MET) Message-ID: <3FB0EC30.30002@gmx.de> Date: Tue, 11 Nov 2003 15:03:28 +0100 From: Siegbert Baude User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; de-DE; rv:1.5) Gecko/20031013 Thunderbird/0.3 X-Accept-Language: de-de, de-at, de, en-us, en MIME-Version: 1.0 To: "Ralph F. De Witt" References: <200311102008.49106.ralphdewitt@charter.net> In-Reply-To: <200311102008.49106.ralphdewitt@charter.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-DCC-RollaNet-Metrics: gemini 1004; Body=2 Fuz1=2 Fuz2=2 cc: freebsd-questions@freebsd.org Subject: Re: Two Preinstall Questions X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 14:07:19 -0000 Hi Ralph, > I have two questions before I plunge in and make my first FreeBSD install. > Normally I keep a back up copy of all my data in a ReiserFS formated partion > on my hard drive. When I do a Linux Distribution install I will reformat the > non back up partions and then restore my data by copying from the backup > partion. Will I be able to do this with my FreeBSD install? Will FreeBSD be > able to mount and read write data from this Linux Reiserfs formated partion? FreeBSD can read an write (albeit the latter is marked experimental) from an ext2fs. Reiserfs is not supported at the moment. So you would have to change the type of your backup partition. > My second question is hardware related. Is the Logitech 4000 Pro USB Web > camera supported in FreeBSD? Sorry, I can't help you with this one. Ciao Siegbert From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 06:13:57 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 12C0B16A4CF for ; Tue, 11 Nov 2003 06:13:57 -0800 (PST) Received: from geminix.org (gen129.n001.c02.escapebox.net [213.73.91.129]) by mx1.FreeBSD.org (Postfix) with ESMTP id 24B8D44008 for ; Tue, 11 Nov 2003 06:13:56 -0800 (PST) (envelope-from gemini@geminix.org) Message-ID: <3FB0EEA1.3080900@geminix.org> Date: Tue, 11 Nov 2003 15:13:53 +0100 From: Uwe Doering Organization: Private UNIX Site User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.5) Gecko/20031019 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org References: <1068537969.3fb09871f36cc@webmail.jaring.my> In-Reply-To: <1068537969.3fb09871f36cc@webmail.jaring.my> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Received: from gemini by geminix.org with asmtp (TLSv1:AES256-SHA:256) (Exim 3.36 #1) id 1AJZHG-0004rR-00; Tue, 11 Nov 2003 15:13:54 +0100 Subject: Re: kernel error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 14:13:57 -0000 X-List-Received-Date: Tue, 11 Nov 2003 14:13:57 -0000 Norhisham Khalil wrote: > i have error message on my samba server on freebsd 5.1 > > FreeBSD bsdbro.fc.com 5.1-RELEASE-p2 FreeBSD 5.1-RELEASE-p2 #1: Sun Aug 24 > 16:48:49 MYT 2003 root@bsdbro.fc.com:/usr/obj/usr/src/sys/BSDKING > i386 > > kernel: psmintr: delay too long; reseting byte count > kernel: psmintr: out of sync (0008 != 0000). > kernel: psmintr: discard a byte (1) > > is this a sign of deteriorating harddisk? > or i need to tweak syscontrol? This is the mouse driver complaining that it got out of sync with your pointer device. This can happen from time to time and is harmless as long as it occurs infrequently. At least that's my experience. Uwe -- Uwe Doering | EscapeBox - Managed On-Demand UNIX Servers gemini@geminix.org | http://www.escapebox.net From owner-freebsd-questions@FreeBSD.ORG Tue Nov 11 06:14:12 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 03C2F16A4CE for ; Tue, 11 Nov 2003 06:14:12 -0800 (PST) Received: from madhaus.cns.utoronto.ca (madhaus.cns.utoronto.ca [128.100.103.10]) by mx1.FreeBSD.org (Postfix) with SMTP id 1163E43FF5 for ; Tue, 11 Nov 2003 06:14:11 -0800 (PST) (envelope-from russ@madhaus.cns.utoronto.ca) Received: (qmail 12800 invoked by uid 1032); 11 Nov 2003 14:14:10 -0000 Date: Tue, 11 Nov 2003 09:14:09 -0500 To: freebsd-questions@freebsd.org Message-ID: <20031111141409.GA11965@madhaus.cns.utoronto.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.28i Organization: University of Toronto From: "Russell P. Sutherland" X-Delivery-Agent: TMDA/0.51 (Python 2.1.3 on Linux/i686) Subject: Keyboard not responding, Dell PE2650 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 11 Nov 2003 14:14:12 -0000 I have a fairly reproduceable problem with a new Dell PowerEdge 2650: After the machine has booted in a headless state (no keyboard or monitor) and then one inserts a keyboard into either the front or rear PS/2 plugs, there is no communication input from the keyboard to the server. The monitor/VGA port communication is fine. I believe the keyboard repsonse is _normal_ if the keyboard is plugged in while the machine is powering up. Has anyone else experienced this problem? And if so how was the issue resolved? Here is a copy of dmesg output from the machine: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #0: Wed Oct 29 13:19:21 EST 2003 russ@bute.gw.utoronto.ca:/usr/obj/usr/src/sys/ZEBRA Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2784317344 Hz CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2784.32-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 536805376 (524224K bytes) avail memory = 518549504 (506396K bytes) Preloaded elf kernel "kernel" at 0xc040f000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fc430 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pci0: (vendor=0x1028, dev=0x000c) at 4.0 irq 11 pci0: (vendor=0x1028, dev=0x0008) at 4.1 irq 10 pci0: (vendor=0x1028, dev=0x000d) at 4.2 irq 7 pci0: at 14.0 atapci0: port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 15.2 irq 5 isab0: at device 15.3 on pci0 isa0: on isab0 pcib1: on motherboard pci1: on pcib1 skc0: port 0xcc00-0xccff mem 0xfcf00000-0xfcf03fff irq 11 at device 6.0 on pci1 skc0: SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter sk0: on skc0 sk0: Ethernet address: 00:00:5a:9c:32:26 miibus0: on sk0 e1000phy0: on miibus0 e1000phy0: 1000baseSX-FDX, auto pcib8: at device 8.0 on pci1 pci2: on pcib8 fxp0: port 0xdce0-0xdcff mem 0xfcd00000-0xfcdfffff,0xfcaff000-0xfcafffff irq 10 at device 4.0 on pci2 fxp0: Ethernet address 00:02:b3:da:62:5a inphy0: on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: port 0xdcc0-0xdcdf mem 0xfcc00000-0xfccfffff,0xfcafe000-0xfcafefff irq 7 at device 5.0 on pci2 fxp1: Ethernet address 00:02:b3:da:62:5b inphy1: on miibus2 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: on motherboard pci3: on pcib2 pcib3: on motherboard pci4: on pcib3 bge0: mem 0xfc910000-0xfc91ffff irq 11 at device 6.0 on pci4 bge0: Ethernet address: 00:0b:db:e6:e4:1c miibus3: on bge0 brgphy0: on miibus3 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: mem 0xfc900000-0xfc90ffff irq 10 at device 8.0 on pci4 bge1: Ethernet address: 00:0b:db:e6:e4:1d miibus4: on bge1 brgphy1: on miibus4 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib4: on motherboard pci5: on pcib4 pcib9: at device 8.0 on pci5 pci6: on pcib9 pci6: (vendor=0x9005, dev=0x00c5) at 6.0 irq 7 pci6: (vendor=0x9005, dev=0x00c5) at 6.1 irq 11 aac0: mem 0xf0000000-0xf7ffffff irq 7 at device 8.1 on pci5 aac0: i960RX 100MHz, 118MB cache memory, optional battery present aac0: Kernel 2.7-1, Build 3170, S/N c061d3 aac0: Supported Options=75c pcib5: on motherboard pci7: on pcib5 pcib6: on motherboard pci8: on pcib6 pcib7: on motherboard pci9: on pcib7 orm0: would work. ;highlight.string =3D #DD0000 ;highlight.comment =3D #FF9900 ;highlight.keyword =3D #007700 ;highlight.bg =3D #FFFFFF ;highlight.default =3D #0000BB ;highlight.html =3D #000000 ; ; Misc ; ; Decides whether PHP may expose the fact that it is installed on the = server ; (e.g. by adding its signature to the Web server header). It is no = security ; threat in any way, but it makes it possible to determine whether you = use PHP ; on your server or not. expose_php =3D On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; max_execution_time =3D 30 ; Maximum execution time of each script, = in seconds max_input_time =3D 60 ; Maximum amount of time each script may spend = parsing request data memory_limit =3D 8M ; Maximum amount of memory a script may consume = (8MB) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; error_reporting is a bit-field. Or each number up to get desired = error ; reporting level ; E_ALL - All errors and warnings ; E_ERROR - fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often = result ; from a bug in your code, but it's possible that it = was ; intentional (e.g., using an uninitialized variable = and ; relying on the fact it's automatically initialized = to an ; empty string) ; E_CORE_ERROR - fatal errors that occur during PHP's initial = startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during = PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; ; Examples: ; ; - Show all errors, except for notices ; ;error_reporting =3D E_ALL & ~E_NOTICE ; ; - Show only errors ; ;error_reporting =3D E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR ; ; - Show all errors ; error_reporting =3D E_ALL ; Print out errors (as a part of the output). For production web sites, ; you're strongly encouraged to turn this feature off, and use error = logging ; instead (see below). Keeping display_errors enabled on a production = web site ; may reveal security information to end users, such as file paths on = your Web ; server, your database schema or other information. display_errors =3D Off ; Even when display_errors is on, errors that occur during PHP's startup ; sequence are not displayed. It's strongly recommended to keep ; display_startup_errors off, except for when debugging. display_startup_errors =3D Off ; Log errors into a log file (server-specific log, stderr, or error_log = (below)) ; As stated above, you're strongly advised to use error logging in place = of ; error displaying on production web sites. log_errors =3D On ; Set maximum length of log_errors. In error_log information about the = source is ; added. The default is 1024 and 0 allows to not apply any maximum = length at all. log_errors_max_len =3D 1024 ; Do not log repeated messages. Repeated errors must occur in same file = on same ; line until ignore_repeated_source is set true. ignore_repeated_errors =3D Off ; Ignore source of message when ignoring repeated messages. When this = setting=20 ; is On you will not log errors with repeated messages from different = files or ; sourcelines. ignore_repeated_source =3D Off ; If this parameter is set to Off, then memory leaks will not be shown = (on ; stdout or in the log). This has only effect in a debug compile, and if = ; error reporting includes E_WARNING in the allowed list report_memleaks =3D On ; Store the last error/warning message in $php_errormsg (boolean). track_errors =3D Off ; Disable the inclusion of HTML tags in error messages. ;html_errors =3D Off ; If html_errors is set On PHP produces clickable error messages that = direct=20 ; to a page describing the error or function causing the error in = detail. ; You can download a copy of the PHP manual from = http://www.php.net/docs.php=20 ; and change docref_root to the base URL of your local copy including = the ; leading '/'. You must also specify the file extension being used = including=20 ; the dot. ;docref_root =3D "/phpmanual/" ;docref_ext =3D .html =20 ; String to output before an error message. ;error_prepend_string =3D "" ; String to output after an error message. ;error_append_string =3D "" ; Log errors to specified file. ;error_log =3D filename ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log =3D syslog ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 ; The separator used in PHP generated URLs to separate arguments. ; Default is "&".=20 ;arg_separator.output =3D "&" ; List of separator(s) used by PHP to parse input URLs into variables. ; Default is "&".=20 ; NOTE: Every character in this directive is considered as separator! ;arg_separator.input =3D ";&" ; This directive describes the order in which PHP registers GET, POST, = Cookie, ; Environment and Built-in variables (G, P, C, E & S respectively, often ; referred to as EGPCS or GPC). Registration is done from left to = right, newer ; values override older values. variables_order =3D "GPCS" ; Whether or not to register the EGPCS variables as global variables. = You may ; want to turn this off if you don't want to clutter your scripts' = global scope ; with user data. This makes most sense when coupled with track_vars - = in which ; case you can access all of the GPC variables through the = $HTTP_*_VARS[], ; variables. ; ; You should do your best to write your scripts so that they do not = require ; register_globals to be on; Using form variables as globals can easily = lead ; to possible security problems, if the code is not very well thought = of. register_globals =3D Off ; This directive tells PHP whether to declare the argv&argc variables = (that ; would contain the GET information). If you don't use these variables, = you ; should turn it off for increased performance. register_argc_argv =3D Off ; Maximum size of POST data that PHP will accept. post_max_size =3D 8M ; This directive is deprecated. Use variables_order instead. gpc_order =3D "GPC" ; Magic quotes ; ; Magic quotes for incoming GET/POST/Cookie data. magic_quotes_gpc =3D On ; Magic quotes for runtime-generated data, e.g. data from SQL, from = exec(), etc. magic_quotes_runtime =3D On =20 ; Use Sybase-style magic quotes (escape ' with '' instead of \'). magic_quotes_sybase =3D Off ; Automatically add files before or after any PHP document. auto_prepend_file =3D auto_append_file =3D ; As of 4.0b4, PHP always outputs a character encoding by default in ; the Content-type: header. To disable sending of the charset, simply ; set it to be empty. ; ; PHP's built-in default is text/html default_mimetype =3D "text/html" ;default_charset =3D "iso-8859-1" ; Always populate the $HTTP_RAW_POST_DATA variable. = =20 ;always_populate_raw_post_data =3D On ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" =20 ;include_path =3D ".:/php/includes" ; ; Windows: "\path1;\path2" ;include_path =3D ".;c:\php\includes" ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below doc_root =3D ; The directory under which PHP opens the script using /~usernamem used = only ; if nonempty. user_dir =3D ; Directory in which the loadable extensions (modules) reside. extension_dir =3D "./" ; Whether or not to enable the dl() function. The dl() function does = NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is = automatically ; disabled on them. enable_dl =3D On ; cgi.force_redirect is necessary to provide security running PHP as a = CGI under ; most web servers. Left undefined, PHP turns this on by default. You = can ; turn it off here AT YOUR OWN RISK ; **You CAN safely turn this off for IIS, in fact, you MUST.** ; cgi.force_redirect =3D 1 ; if cgi.force_redirect is turned on, and you are not running under = Apache or Netscape=20 ; (iPlanet) web servers, you MAY need to set an environment variable = name that PHP ; will look for to know it is OK to continue execution. Setting this = variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; cgi.redirect_status_env =3D ; ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for = CGI. PHP's ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and = to not grok ; what PATH_INFO is. For more information on PATH_INFO, see the cgi = specs. Setting ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. = A setting ; of zero causes PHP to behave as before. Default is zero. You should = fix your scripts ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. ; cgi.fix_pathinfo=3D1 ; FastCGI under IIS (on WINNT based OS) supports the ability to = impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under = Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; fastcgi.impersonate =3D 1; ; cgi.rfc2616_headers configuration option tells PHP what type of = headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: = header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Default is zero. ;cgi.rfc2616_headers =3D 0=20 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; ; Whether to allow HTTP file uploads. file_uploads =3D On ; Temporary directory for HTTP uploaded files (will use system default = if not ; specified). ;upload_tmp_dir =3D ; Maximum allowed size for uploaded files. upload_max_filesize =3D 2M ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;; ; Whether to allow the treatment of URLs (like http:// or ftp://) as = files. allow_url_fopen =3D On ; Define the anonymous ftp password (your email address) ;from=3D"john@doe.com" ; Define the user agent for php to send ;user_agent=3D"PHP" ; Default timeout for socket based streams (seconds) default_socket_timeout =3D 60 ; If your scripts have to deal with files from Macintosh systems, ; or you are running on a Mac and need to deal with files from ; unix or win32 systems, setting this flag will cause PHP to ; automatically detect the EOL character in those files so that ; fgets() and file() will work regardless of the source of the file. ; auto_detect_line_endings =3D Off ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; ; If you wish to have an extension loaded automatically, use the = following ; syntax: ; ; extension=3Dmodulename.extension ; ; For example, on Windows: ; ; extension=3Dmsql.dll ; ; ... or under UNIX: ; ; extension=3Dmsql.so ; ; Note that it should be the name of the module only; no directory = information=20 ; needs to go here. Specify the location of the extension with the ; extension_dir directive above. ;Windows Extensions ;Note that MySQL and ODBC support is now built in, so no dll is needed = for it. ; ;extension=3Dphp_bz2.dll ;extension=3Dphp_cpdf.dll ;extension=3Dphp_crack.dll ;extension=3Dphp_curl.dll ;extension=3Dphp_db.dll ;extension=3Dphp_dba.dll ;extension=3Dphp_dbase.dll ;extension=3Dphp_dbx.dll ;extension=3Dphp_domxml.dll ;extension=3Dphp_exif.dll ;extension=3Dphp_fdf.dll ;extension=3Dphp_filepro.dll ;extension=3Dphp_gd2.dll ;extension=3Dphp_gettext.dll ;extension=3Dphp_hyperwave.dll ;extension=3Dphp_iconv.dll ;extension=3Dphp_ifx.dll ;extension=3Dphp_iisfunc.dll ;extension=3Dphp_imap.dll ;extension=3Dphp_interbase.dll ;extension=3Dphp_java.dll ;extension=3Dphp_ldap.dll ;extension=3Dphp_mbstring.dll ;extension=3Dphp_mcrypt.dll ;extension=3Dphp_mhash.dll ;extension=3Dphp_mime_magic.dll ;extension=3Dphp_ming.dll ;extension=3Dphp_mssql.dll ;extension=3Dphp_msql.dll ;extension=3Dphp_oci8.dll ;extension=3Dphp_openssl.dll ;extension=3Dphp_oracle.dll ;extension=3Dphp_pdf.dll ;extension=3Dphp_pgsql.dll ;extension=3Dphp_printer.dll ;extension=3Dphp_shmop.dll ;extension=3Dphp_snmp.dll ;extension=3Dphp_sockets.dll ;extension=3Dphp_sybase_ct.dll ;extension=3Dphp_w32api.dll ;extension=3Dphp_xmlrpc.dll ;extension=3Dphp_xslt.dll ;extension=3Dphp_yaz.dll ;extension=3Dphp_zip.dll ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [Syslog] ; Whether or not to define the various syslog variables (e.g. $LOG_PID, ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In ; runtime, you can define these variables by calling = define_syslog_variables(). define_syslog_variables =3D Off [mail function] ; For Win32 only. SMTP =3D localhost ; For Win32 only. sendmail_from =3D me@localhost.com ; For Unix only. You may supply arguments as well (default: "sendmail = -t -i"). ;sendmail_path =3D [Java] ;java.class.path =3D .\php_java.jar ;java.home =3D c:\jdk ;java.library =3D c:\jdk\jre\bin\hotspot\jvm.dll=20 ;java.library.path =3D .\ [SQL] sql.safe_mode =3D Off [ODBC] ;odbc.default_db =3D Not yet implemented ;odbc.default_user =3D Not yet implemented ;odbc.default_pw =3D Not yet implemented ; Allow or prevent persistent links. odbc.allow_persistent =3D On ; Check that a connection is still valid before reuse. odbc.check_persistent =3D On ; Maximum number of persistent links. -1 means no limit. odbc.max_persistent =3D -1 ; Maximum number of links (persistent + non-persistent). -1 means no = limit. odbc.max_links =3D -1 =20 ; Handling of LONG fields. Returns number of bytes to variables. 0 = means ; passthru. odbc.defaultlrl =3D 4096 =20 ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert = to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an = explanation ; of uodbc.defaultlrl and uodbc.defaultbinmode odbc.defaultbinmode =3D 1 =20 [MySQL] ; Allow or prevent persistent links. mysql.allow_persistent =3D On ; Maximum number of persistent links. -1 means no limit. mysql.max_persistent =3D -1 ; Maximum number of links (persistent + non-persistent). -1 means no = limit. mysql.max_links =3D -1 ; Default port number for mysql_connect(). If unset, mysql_connect() = will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will = only look ; at MYSQL_PORT. mysql.default_port =3D ; Default socket name for local MySQL connects. If empty, uses the = built-in ; MySQL defaults. mysql.default_socket =3D ; Default host for mysql_connect() (doesn't apply in safe mode). mysql.default_host =3D ; Default user for mysql_connect() (doesn't apply in safe mode). mysql.default_user =3D ; Default password for mysql_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this = file. ; *Any* user with PHP access can run 'echo = get_cfg_var("mysql.default_password") ; and reveal this password! And of course, any users with read access = to this ; file will be able to reveal the password as well. mysql.default_password =3D ; Maximum time (in secondes) for connect timeout. -1 means no limimt mysql.connect_timeout =3D 60 ; Trace mode. When trace_mode is active (=3DOn), warnings for = table/index scans and ; SQL-Erros will be displayed. mysql.trace_mode =3D Off [mSQL] ; Allow or prevent persistent links. msql.allow_persistent =3D On ; Maximum number of persistent links. -1 means no limit. msql.max_persistent =3D -1 ; Maximum number of links (persistent+non persistent). -1 means no = limit. msql.max_links =3D -1 [PostgresSQL] ; Allow or prevent persistent links. pgsql.allow_persistent =3D On ; Detect broken persistent links always with pg_pconnect().=20 ; Auto reset feature requires a little overheads. pgsql.auto_reset_persistent =3D Off ; Maximum number of persistent links. -1 means no limit. pgsql.max_persistent =3D -1 ; Maximum number of links (persistent+non persistent). -1 means no = limit. pgsql.max_links =3D -1 ; Ignore PostgreSQL backends Notice message or not. ; Notice message logging require a little overheads. pgsql.ignore_notice =3D 0 ; Log PostgreSQL backends Noitce message or not. ; Unless pgsql.ignore_notice=3D0, module cannot log notice message. pgsql.log_notice =3D 0 [Sybase] ; Allow or prevent persistent links. sybase.allow_persistent =3D On ; Maximum number of persistent links. -1 means no limit. sybase.max_persistent =3D -1 ; Maximum number of links (persistent + non-persistent). -1 means no = limit. sybase.max_links =3D -1 ;sybase.interface_file =3D "/usr/sybase/interfaces" ; Minimum error severity to display. sybase.min_error_severity =3D 10 ; Minimum message severity to display. sybase.min_message_severity =3D 10 ; Compatability mode with old versions of PHP 3.0. ; If on, this will cause PHP to automatically assign types to results = according ; to their Sybase type, instead of treating them all as strings. This ; compatability mode will probably not stay around forever, so try = applying ; whatever necessary changes to your code, and turn it off. sybase.compatability_mode =3D Off [Sybase-CT] ; Allow or prevent persistent links. sybct.allow_persistent =3D On ; Maximum number of persistent links. -1 means no limit. sybct.max_persistent =3D -1 ; Maximum number of links (persistent + non-persistent). -1 means no = limit. sybct.max_links =3D -1 ; Minimum server message severity to display. sybct.min_server_severity =3D 10 ; Minimum client message severity to display. sybct.min_client_severity =3D 10 [dbx] ; returned column names can be converted for compatibility reasons ; possible values for dbx.colnames_case are ; "unchanged" (default, if not set) ; "lowercase" ; "uppercase" ; the recommended default is either upper- or lowercase, but ; unchanged is currently set for backwards compatibility dbx.colnames_case =3D "lowercase" [bcmath] ; Number of decimal digits for all bcmath functions. bcmath.scale =3D 0 [browscap] ;browscap =3D extra/browscap.ini [Informix] ; Default host for ifx_connect() (doesn't apply in safe mode). ifx.default_host =3D ; Default user for ifx_connect() (doesn't apply in safe mode). ifx.default_user =3D ; Default password for ifx_connect() (doesn't apply in safe mode). ifx.default_password =3D ; Allow or prevent persistent links. ifx.allow_persistent =3D On ; Maximum number of persistent links. -1 means no limit. ifx.max_persistent =3D -1 ; Maximum number of links (persistent + non-persistent). -1 means no = limit. ifx.max_links =3D -1 ; If on, select statements return the contents of a text blob instead of = its id. ifx.textasvarchar =3D 0 ; If on, select statements return the contents of a byte blob instead of = its id. ifx.byteasvarchar =3D 0 ; Trailing blanks are stripped from fixed-length char columns. May help = the ; life of Informix SE users. ifx.charasvarchar =3D 0 ; If on, the contents of text and byte blobs are dumped to a file = instead of ; keeping them in memory. ifx.blobinfile =3D 0 ; NULL's are returned as empty strings, unless this is set to 1. In = that case, ; NULL's are returned as string 'NULL'. ifx.nullformat =3D 0 [Session] ; Handler used to store/retrieve data. session.save_handler =3D files ; Argument passed to save_handler. In the case of files, this is the = path ; where data files are stored. Note: Windows users have to change this=20 ; variable in order to use PHP's session functions. session.save_path =3D /tmp ; Whether to use cookies. session.use_cookies =3D 1 ; This option enables administrators to make their users invulnerable to = ; attacks which involve passing session ids in URLs; defaults to 0. ; session.use_only_cookies =3D 1 ; Name of the session (used as cookie name). session.name =3D PHPSESSID ; Initialize session on request startup. session.auto_start =3D 0 ; Lifetime in seconds of cookie or, if 0, until browser is restarted. session.cookie_lifetime =3D 0 ; The path for which the cookie is valid. session.cookie_path =3D / ; The domain for which the cookie is valid. session.cookie_domain =3D ; Handler used to serialize data. php is the standard serializer of = PHP. session.serialize_handler =3D php ; Define the probability that the 'garbage collection' process is = started ; on every session initialization. ; The probability is calculated by using gc_probability/gc_divisor, ; e.g. 1/100 means there is a 1% chance that the GC process starts ; on each request. session.gc_probability =3D 1 session.gc_divisor =3D 1000 ; After this number of seconds, stored data will be seen as 'garbage' = and ; cleaned up by the garbage collection process. session.gc_maxlifetime =3D 1440 ; PHP 4.2 and less have an undocumented feature/bug that allows you to ; to initialize a session variable in the global scope, albeit = register_globals ; is disabled. PHP 4.3 and later will warn you, if this feature is = used. ; You can disable the feature and the warning seperately. At this time, ; the warning is only displayed, if bug_compat_42 is enabled. session.bug_compat_42 =3D 0 session.bug_compat_warn =3D 1 ; Check HTTP Referer to invalidate externally stored URLs containing = ids. ; HTTP_REFERER has to contain this substring for the session to be ; considered as valid. session.referer_check =3D ; How many bytes to read from the file. session.entropy_length =3D 0 ; Specified here to create the session id. session.entropy_file =3D ;session.entropy_length =3D 16 ;session.entropy_file =3D /dev/urandom ; Set to {nocache,private,public,} to determine HTTP caching aspects. ; or leave this empty to avoid sending anti-caching headers. session.cache_limiter =3D nocache ; Document expires after n minutes. session.cache_expire =3D 180 ; trans sid support is disabled by default. ; Use of trans sid may risk your users security. ; Use this option with caution. ; - User may send URL contains active session ID ; to other person via. email/irc/etc. ; - URL that contains active session ID may be stored ; in publically accessible computer.=20 ; - User may access your site with the same session ID ; always using URL stored in browser's history or bookmarks. session.use_trans_sid =3D 0 ; The URL rewriter will look for URLs in a defined set of HTML tags. ; form/fieldset are special; if you include them here, the rewriter will ; add a hidden field with the info which is otherwise appended ; to URLs. If you want XHTML conformity, remove the form entry. ; Note that all valid entries require a "=3D", even if no value follows. url_rewriter.tags =3D = "a=3Dhref,area=3Dhref,frame=3Dsrc,input=3Dsrc,form=3Dfakeentry" [MSSQL] ; Allow or prevent persistent links. mssql.allow_persistent =3D On ; Maximum number of persistent links. -1 means no limit. mssql.max_persistent =3D -1 ; Maximum number of links (persistent+non persistent). -1 means no = limit. mssql.max_links =3D -1 ; Minimum error severity to display. mssql.min_error_severity =3D 10 ; Minimum message severity to display. mssql.min_message_severity =3D 10 ; Compatability mode with old versions of PHP 3.0. mssql.compatability_mode =3D Off ; Valid range 0 - 2147483647. Default =3D 4096. ;mssql.textlimit =3D 4096 ; Valid range 0 - 2147483647. Default =3D 4096. ;mssql.textsize =3D 4096 ; Limits the number of records in each batch. 0 =3D all records in one = batch. ;mssql.batchsize =3D 0 ; Use NT authentication when connecting to the server mssql.secure_connection =3D Off ; Specify max number of processes. Default =3D 25 ;mssql.max_procs =3D 25 [Assertion] ; Assert(expr); active by default. ;assert.active =3D On ; Issue a PHP warning for each failed assertion. ;assert.warning =3D On ; Don't bail out by default. ;assert.bail =3D Off ; User-function to be called if an assertion fails. ;assert.callback =3D 0 ; Eval the expression with current error_reporting(). Set to true if = you want ; error_reporting(0) around the eval(). ;assert.quiet_eval =3D 0 [Ingres II] ; Allow or prevent persistent links. ingres.allow_persistent =3D On ; Maximum number of persistent links. -1 means no limit. ingres.max_persistent =3D -1 ; Maximum number of links, including persistents. -1 means no limit. ingres.max_links =3D -1 ; Default database (format: [node_id::]dbname[/srv_class]). ingres.default_database =3D ; Default user. ingres.default_user =3D ; Default password. ingres.default_password =3D [Verisign Payflow Pro] ; Default Payflow Pro server. pfpro.defaulthost =3D "test-payflow.verisign.com" ; Default port to connect to. pfpro.defaultport =3D 443 ; Default timeout in seconds. pfpro.defaulttimeout =3D 30 ; Default proxy IP address (if required). ;pfpro.proxyaddress =3D ; Default proxy port. ;pfpro.proxyport =3D ; Default proxy logon. ;pfpro.proxylogon =3D ; Default proxy password. ;pfpro.proxypassword =3D [Sockets] ; Use the system read() function instead of the php_read() wrapper. sockets.use_system_read =3D On [com] ; path to a file containing GUIDs, IIDs or filenames of files with = TypeLibs ;com.typelib_file =3D=20 ; allow Distributed-COM calls ;com.allow_dcom =3D true ; autoregister constants of a components typlib on com_load() ;com.autoregister_typelib =3D true ; register constants casesensitive ;com.autoregister_casesensitive =3D false ; show warnings on duplicate constat registrations ;com.autoregister_verbose =3D true [Printer] ;printer.default_printer =3D "" [mbstring] ; language for internal character representation. ;mbstring.language =3D Japanese ; internal/script encoding. ; Some encoding cannot work as internal encoding. ; (e.g. SJIS, BIG5, ISO-2022-*) ;mbstring.internal_encoding =3D EUC-JP ; http input encoding. ;mbstring.http_input =3D auto ; http output encoding. mb_output_handler must be ; registered as output buffer to function ;mbstring.http_output =3D SJIS ; enable automatic encoding translation accoding to=20 ; mbstring.internal_encoding setting. Input chars are ; converted to internal encoding by setting this to On. ; Note: Do _not_ use automatic encoding translation for ; portable libs/applications. ;mbstring.encoding_translation =3D Off ; automatic encoding detection order. ; auto means=20 ;mbstring.detect_order =3D auto ; substitute_character used when character cannot be converted ; one from another ;mbstring.substitute_character =3D none; ; overload(replace) single byte functions by mbstring functions. ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), ; etc. Possible values are 0,1,2,4 or combination of them. ; For example, 7 for overload everything. ; 0: No overload ; 1: Overload mail() function ; 2: Overload str*() functions ; 4: Overload ereg*() functions ;mbstring.func_overload =3D 0 [FrontBase] ;fbsql.allow_persistent =3D On ;fbsql.autocommit =3D On ;fbsql.default_database =3D=20 ;fbsql.default_database_password =3D ;fbsql.default_host =3D ;fbsql.default_password =3D ;fbsql.default_user =3D "_SYSTEM" ;fbsql.generate_warnings =3D Off ;fbsql.max_connections =3D 128 ;fbsql.max_links =3D 128 ;fbsql.max_persistent =3D -1 ;fbsql.max_results =3D 128 ;fbsql.batchSize =3D 1000 [Crack] ; Modify the setting below to match the directory location of the = cracklib ; dictionary files. Include the base filename, but not the file = extension. ; crack.default_dictionary =3D "c:\php\lib\cracklib_dict" [exif] ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as = JIS.=20 ; With mbstring support this will automatically be converted into the = encoding ; given by corresponding encode setting. When empty = mbstring.internal_encoding=20 ; is used. For the decode settings you can distinguish between motorola = and=20 ; intel byte order. A decode setting cannot be empty. ;exif.encode_unicode =3D ISO-8859-15 ;exif.decode_unicode_motorola =3D UCS-2BE ;exif.decode_unicode_intel =3D UCS-2LE ;exif.encode_jis =3D=20 ;exif.decode_jis_motorola =3D JIS ;exif.decode_jis_intel =3D JIS ; Local Variables: ; tab-width: 4 ; End: ------=_NextPart_000_0040_01C3ABAB.E11394A0-- From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 09:24:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 399F316A4CE for ; Sat, 15 Nov 2003 09:24:13 -0800 (PST) Received: from paiol.terra.com.br (paiol.terra.com.br [200.176.3.18]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9161443FF2 for ; Sat, 15 Nov 2003 09:24:11 -0800 (PST) (envelope-from goulartpel@terra.com.br) Received: from marova.terra.com.br (marova.terra.com.br [200.176.3.39]) by paiol.terra.com.br (Postfix) with ESMTP id B9237848365; Sat, 15 Nov 2003 15:24:09 -0200 (BRST) Received: from terra.com.br (200-203-103-227.pltce7004.dsl.brasiltelecom.net.br [200.203.103.227]) (authenticated user marcio.goulart) by marova.terra.com.br (Postfix) with ESMTP id B4C5E3DC0AE; Sat, 15 Nov 2003 15:24:08 -0200 (BRST) Message-ID: <3FB6613E.3000700@terra.com.br> Date: Sat, 15 Nov 2003 15:24:14 -0200 From: =?ISO-8859-1?Q?M=E1rcio_Concei=E7=E3o_Goulart?= User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.4) Gecko/20030927 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Andreas Kohn References: <3FB5653A.2070601@terra.com.br> <1068909442.780.1.camel@klamath> In-Reply-To: <1068909442.780.1.camel@klamath> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit cc: questions@freebsd.org Subject: Re: JavaNNS installation issues under FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 17:24:13 -0000 X-List-Received-Date: Sat, 15 Nov 2003 17:24:13 -0000 Andreas Kohn wrote: >On Sat, 2003-11-15 at 00:28, Márcio Conceiįão Goulart wrote: > > >>Hi everybody, >>I'm getting problems to install the JavaNNS 1.1 in FreeBSD 4.9. >>I tried to install via ports and the package JavaNNS-LinuxIntel.tar.gz >>but with both i get the same error, that they could'nt find the >>libSNNS_jkr.so. >>It asks the path to put the library(/usr/home/marcio/jnns) and the >>library is created in the directory, but JavaNNS can't still find the >>library file. Does anyone can help me with some idea? >> >>Below are the output: >>... >>bash-2.05b$ pwd >>/usr/home/marcio/jnns >> >>bash-2.05b$ ls >>JavaNNS.jar libSNNS_jkr.so >> >>bash-2.05b$ javavm -jar JavaNNS.jar >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>Font specified in font.properties not found >>[--symbol-medium-r-normal--*-%d-*-*- >> >>p-*-adobe-fontspecific] >>java.lang.Exception: The system couldnīt find the library SNNS_jkr >>JavaNNS couldnīt start. >> at javanns.Network.(Network.java:48) >> at javanns.Snns.(Snns.java:151) >> at javanns.Snns.appletMain(Snns.java:278) >> at javanns.Snns.main(Snns.java:258) >>*** If I do: javavm -Djava.library.file=/usr/home/marcio/jnns -jar >>JavaNNS.jar I get the same error as well. >>*** even if i login with "root" the problems are the same. >>bash-2.05b$ uname -a >>FreeBSD pluto.pyrolabs.org 4.9-RELEASE FreeBSD 4.9-RELEASE #0: Mon Nov >>10 18:01:16 BRST 2003 >>root@pluto.pyrolabs.org:/usr/obj/usr/src/sys/PLUTO i386 >> >>Thanks in advance and sorry for my bad english, >>Márcio Conceiįão Goulart. >> >> >> >> >Hi, > >try setting LD_LIBRARY_PATH to the current directory, ie. > >$ export LD_LIBRARY_PATH=$PWD > >HTH, > > Hi, Unfortunately, the problem still persists, i can't realize why the system can't find the file, but probably it is some compatibility problem of the software. Anyway, thanks for the help. Márcio Conceiįão Goulart :~/jnns $_ echo $LD_LIBRARY_PATH /home/marcio/jnns :~/jnns $_ pwd /home/marcio/jnns :~/jnns $_ la total 1972 drwxr-xr-x 2 marcio wheel - 512 Nov 15 15:16 ./ drwxr-xr-x 15 marcio wheel - 1024 Nov 15 15:12 ../ -rwxr-xr-x 1 marcio wheel - 757220 Nov 13 00:05 JavaNNS.jar* -rw-r--r-- 1 marcio wheel - 1196614 Nov 15 15:17 libSNNS_jkr.so :~/jnns $_ From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 09:24:54 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1564016A4CE for ; Sat, 15 Nov 2003 09:24:54 -0800 (PST) Received: from smtp.orbitel.bg (smtp.orbitel.bg [195.24.32.22]) by mx1.FreeBSD.org (Postfix) with SMTP id 1704843FEC for ; Sat, 15 Nov 2003 09:24:52 -0800 (PST) (envelope-from bivol@vip.bg) Received: (qmail 8350 invoked from network); 15 Nov 2003 17:24:49 -0000 Received: from unknown (HELO BGSOFX04) (193.108.24.73) by mail.orbitel.bg with SMTP; 15 Nov 2003 17:24:49 -0000 Message-ID: <01ed01c3ab9d$5fa17da0$0201a8c0@BGSOFX04> From: "Peter Zyumbilev" To: "Ian Barnes" , References: Date: Sat, 15 Nov 2003 19:24:49 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Subject: Re: PHP.ini X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 17:24:54 -0000 This: register_globals = Off shol uld be: register_globals = On BIVOL ----- Original Message ----- From: "Ian Barnes" To: Sent: Saturday, November 15, 2003 7:08 PM Subject: PHP.ini > Hi, > > I appologise for duplicate posting. I forgot to attach the file > > I am having problems parsing php variables. > > say now i goto http://www.testdomain.com/index.php?news=TODAY its not > carrying the news=TODAY variable to the next page. > > I have gone through my php.ini file and i cant find any problems. Now im > fairly sure that it is my php.ini file thats causing the problems. Attached > is my php.ini, if someone could find a fault i would be most gratefull. > > I am running PHP 4-4.3.3.r1_1,1 withApache 1.3.27_5 on FreeBSD 4.9 Stable. > > Thanks. > > Ian > ---------------------------------------------------------------------------- ---- > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 09:29:38 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9043B16A4CE for ; Sat, 15 Nov 2003 09:29:38 -0800 (PST) Received: from be-well.no-ip.com (lowellg.ne.client2.attbi.com [66.30.200.37]) by mx1.FreeBSD.org (Postfix) with ESMTP id EAB0243F75 for ; Sat, 15 Nov 2003 09:29:37 -0800 (PST) (envelope-from freebsd-questions-local@be-well.ilk.org) Received: by be-well.no-ip.com (Postfix, from userid 1147) id 86BA860; Sat, 15 Nov 2003 12:29:37 -0500 (EST) Sender: lowell@be-well.ilk.org To: freebsd-questions@freebsd.org References: <000e01c3aac6$6f2bbdd0$0901a8c0@bloodlust> From: Lowell Gilbert Date: 15 Nov 2003 12:29:37 -0500 In-Reply-To: <000e01c3aac6$6f2bbdd0$0901a8c0@bloodlust> Message-ID: <44y8uh1qwu.fsf@be-well.ilk.org> Lines: 7 User-Agent: Gnus/5.09 (Gnus v5.9.0) Emacs/21.3 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii cc: Xpression Subject: Re: user's rights ??? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: freebsd-questions@freebsd.org List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 17:29:38 -0000 "Xpression" writes: > Everyone wants to uploads files via HTTP but I guess they have to > authenticate to write on their sub-dirs, any clues ??? Thanks... http://www.apacheweek.com/features/put From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 09:45:42 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8FE1816A4CE for ; Sat, 15 Nov 2003 09:45:42 -0800 (PST) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5248543FDD for ; Sat, 15 Nov 2003 09:45:40 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAFHjJBg072520 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sat, 15 Nov 2003 17:45:21 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAFHjJsV072519; Sat, 15 Nov 2003 17:45:19 GMT (envelope-from matthew) Date: Sat, 15 Nov 2003 17:45:19 +0000 From: Matthew Seaman To: Ian Barnes Message-ID: <20031115174519.GA72405@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Ian Barnes , questions@freebsd.org References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="Dxnq1zWXvFF0Q93v" Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: questions@freebsd.org Subject: Re: PHP.ini X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 17:45:42 -0000 --Dxnq1zWXvFF0Q93v Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Nov 15, 2003 at 07:08:40PM +0200, Ian Barnes wrote: > I am having problems parsing php variables. >=20 > say now i goto http://www.testdomain.com/index.php?news=3DTODAY its not > carrying the news=3DTODAY variable to the next page. >=20 > I have gone through my php.ini file and i cant find any problems. Now im > fairly sure that it is my php.ini file thats causing the problems. Attach= ed > is my php.ini, if someone could find a fault i would be most gratefull. register_globals is turned off for security reasons nowadays. You should be very careful of turning off register_globals on any machine exposed to the internet. The recommended way to access the CGI data is through the $_GET[] array (or $_POST[] for scripts that work by that action) Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --Dxnq1zWXvFF0Q93v Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/tmYvdtESqEQa7a0RAmF1AJ9rgJNZiDANRwWzXKgZhbKqx06EagCdGyCp K1DJdCQoyjVINMJod3KBDNE= =BS22 -----END PGP SIGNATURE----- --Dxnq1zWXvFF0Q93v-- From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 09:57:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8CBBB16A4CF for ; Sat, 15 Nov 2003 09:57:13 -0800 (PST) Received: from lakemtao06.cox.net (lakemtao06.cox.net [68.1.17.115]) by mx1.FreeBSD.org (Postfix) with ESMTP id 41C3F43F85 for ; Sat, 15 Nov 2003 09:57:12 -0800 (PST) (envelope-from kitbsdlists@HotPOP.com) Received: from fortytwo ([68.109.49.234]) by lakemtao06.cox.net (InterMail vM.5.01.06.05 201-253-122-130-105-20030824) with SMTP id <20031115175711.DWOP24575.lakemtao06.cox.net@fortytwo>; Sat, 15 Nov 2003 12:57:11 -0500 Date: Sat, 15 Nov 2003 11:55:58 -0600 From: Vulpes Velox To: "Jaques du Plessis" Message-Id: <20031115115558.386d7ff1.kitbsdlists@HotPOP.com> In-Reply-To: References: X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd4.9) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@freebsd.org Subject: Re: HI ATA0 Resseting Device Error X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 17:57:13 -0000 On Thu, 13 Nov 2003 19:29:19 +0200 "Jaques du Plessis" wrote: > Hi i have found the following error on 4.8 4.9 but 5.1 > works except that the bootloader in 5.1 doesnt work many > other people found the same problem thought it would be > sorted in 4.9.. > > What can i do to avoid the ATA0 Resetting Device in 4.9? If find it a little odd that it happens in 4.8/9 but not in 5.1. I have seen something like this twice. Once was bad cables and the other time the drive was getting ready to die. Are they both on the same drive? If so I would really begin suspecting that there may be a drive problem... such as the disk going bad in a spot. I have had this happen to me one, the drive for the most part would read everything fine till it got to one part, thankfully I was able to replace it in time befor it totally failed. You may want to check around on current and stable lists if the hardware checks out good. From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 09:59:51 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id B678516A4CE for ; Sat, 15 Nov 2003 09:59:51 -0800 (PST) Received: from ns1.tiadon.com (SMTP.tiadon.com [69.27.132.161]) by mx1.FreeBSD.org (Postfix) with ESMTP id ADEE043FBF for ; Sat, 15 Nov 2003 09:59:50 -0800 (PST) (envelope-from kdk@daleco.biz) Received: from daleco.biz ([69.27.131.0]) by ns1.tiadon.com with Microsoft SMTPSVC(6.0.3790.0); Sat, 15 Nov 2003 12:02:38 -0600 Message-ID: <3FB6698E.8080102@daleco.biz> Date: Sat, 15 Nov 2003 11:59:42 -0600 From: "Kevin D. Kinsey, DaleCo, S.P." User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.4) Gecko/20030920 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Ian Barnes References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 15 Nov 2003 18:02:39.0062 (UTC) FILETIME=[A825FF60:01C3ABA2] cc: questions@freebsd.org Subject: Re: PHP.ini X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 17:59:51 -0000 Ian Barnes wrote: >Hi, > >I appologise for duplicate posting. I forgot to attach the file > >I am having problems parsing php variables. > >say now i goto http://www.testdomain.com/index.php?news=TODAY its not >carrying the news=TODAY variable to the next page. > >I have gone through my php.ini file and i cant find any problems. Now im >fairly sure that it is my php.ini file thats causing the problems. Attached >is my php.ini, if someone could find a fault i would be most gratefull. > >I am running PHP 4-4.3.3.r1_1,1 withApache 1.3.27_5 on FreeBSD 4.9 Stable. > >Thanks. > >Ian > > While it would be more appropriate to post this in some forum or list that deals specifically with PHP --- I'd recommend the forums at phpbuilder.com or phpfreaks.com; both are friendly and have knowledgeable PHP coders present. However, this is absolutely the #1 FAQ re: PHP at present, and it couldn't hurt, in light of the continual growth in popularity of this scripting language, to address it here. PHP is now shipped with register_globals=OFF, as noted in your attached file. If you access the URL http://www.foo.com/foo.php?bar=baz, and then attempt this in the script "foo.php" You will get no output. It is recommended that you code foo.php thus: which is the above case would echo "baz" to the browser. The workarounds are many; the one you are looking for is to change the register_globals directive in your php.ini to =ON and restart Apache. This is not recommended for several security reasons. As mentioned before, it's *recommended highly* that you begin converting your scripts to the latter usage. Kevin Kinsey DaleCo, S.P. From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 10:25:21 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E739516A4CE for ; Sat, 15 Nov 2003 10:25:21 -0800 (PST) Received: from smtp-27.ig.com.br (smtp-27.ig.com.br [200.226.132.159]) by mx1.FreeBSD.org (Postfix) with SMTP id 5C84D43F85 for ; Sat, 15 Nov 2003 10:25:20 -0800 (PST) (envelope-from hlen@ig.com.br) Received: (qmail 8494 invoked from network); 15 Nov 2003 18:25:27 -0000 Received: from unknown (HELO ig.com.br) (200.141.84.187) by smtp-27.ig.com.br with SMTP; 15 Nov 2003 18:25:27 -0000 Message-ID: <3FB66F8F.6040001@ig.com.br> Date: Sat, 15 Nov 2003 16:25:19 -0200 From: Herculano de Lima Einloft Neto User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.4b) Gecko/20030525 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: hlen@ig.com.br Subject: PPA printing - HP 720C with apsfilter - ioerror X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 18:25:22 -0000 Hello all, I'm trying to get my DeskJet 720C printer set up. It already works on Linux and Windows on the same box. I installed apsfilter, ran SETUP, apspreview works allright, lpd is running, gs -h shows pnmraw... Here : /etc/printcap : lp|local line printer:\ :sh:\ :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: aps1|ppa/720;r=300x300;q=medium;c=full;p=a4;m=auto:\ :lp=/dev/lpt0:\ :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\ :sd=/var/spool/lpd/aps1:\ :lf=/var/spool/lpd/aps1/log:\ :af=/var/spool/lpd/aps1/acct:\ :mx#0:\ :sh: /usr/local/etc/apsfilter/aps1/apsfilterrc : PRINTER='ppa/720' PAPERSIZE='a4' METHOD='auto' QUALITY='medium' COLOR='full' RESOLUTION='300x300' Now whenever I try to print anything, nothing happens, and this is what I see when I cat /var/spool/lpd/aps1/log : Error: /ioerror in --.outputpage-- Operand stack: 1 true Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- 1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- 0 4 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1074/1123(ro)(G)-- --dict:0/20(G)-- --dict:80/200(L)-- --dict:45/100(L)-- Current allocation mode is local Last OS error: 32 GNU Ghostscript 7.06: Unrecoverable error, exit code 1 Any help much appreciated, I can't find anything else online. There's also an error that happens when I don't use the -C option in lpr, though I don't think it's related: apsfilter warning: unknown option 'localhost.localdomain' Some unimportant bug for what I've seen.. Anyway I can't print anything.. anyone? Thanks in advance, -- Herculano de Lima Einloft Neto From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 10:55:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 547F616A4CF for ; Sat, 15 Nov 2003 10:55:13 -0800 (PST) Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8FFE843FE5 for ; Sat, 15 Nov 2003 10:55:09 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp03.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HOE00KGHPTRWQ@smtp03.wxs.nl> for freebsd-questions@FreeBSD.org; Sat, 15 Nov 2003 19:53:52 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAFIt8vI004971; Sat, 15 Nov 2003 19:55:08 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAFIt7TR004970; Sat, 15 Nov 2003 19:55:07 +0100 (CET envelope-from akruijff) Date: Sat, 15 Nov 2003 19:55:07 +0100 From: Alex de Kruijff In-reply-to: <6.0.0.22.0.20031115092348.06019cb0@pop.face2interface.com> To: Marty Landman Message-id: <20031115185507.GA4754@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <6.0.0.22.0.20031115092348.06019cb0@pop.face2interface.com> cc: freebsd-questions@FreeBSD.org Subject: Re: failed X11 install, now what? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 18:55:13 -0000 On Sat, Nov 15, 2003 at 09:44:43AM -0500, Marty Landman wrote: > This is what I found on the screen this morning after letting > > make all install clean Did you execute this in /usr/ports? Its better to select only the port you like to have. > run all night: > > /usr: write failed, file system is full > /usr/bin/tar: xc/fonts/util/KOI8-R.TXT: Wrote only 0 of 10240 bytes > /usr/bin/tar: Skipping to next header > /usr/bin/tar: Error exit delayed from previous errors > *** Error code 1 > > Stop in /usr/ports/x11-fonts/XFree86-4-fontScalable. > *** Error code 1 > > Stop in /usr/ports/x11/XFree86-4. > # > > ............................ > > # df > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/ad0s1a 128990 35170 83502 30% / > /dev/ad0s1f 257998 284 237076 0% /tmp > /dev/ad1s1e 2030062 2015906 -148248 108% /usr > /dev/ad0s1e 257998 2762 234598 1% /var > procfs 4 4 0 100% /proc Just as a tip 'df -h' give human readable output. > Which brings to mind a couple questions. > > 1. ad1 is a 2GB ide slaved to ad0 which is only 1GB - what must I do > immediately to clear space on ad1 or is nothing impacted with the disk > being over full? A port first fetches the sources it need and places these in /usr/ports/distfiles/. You could empty this with: rm -rf /usr/ports/distfiles/* You could also move /usr/src/ and /usr/obj to another machine and mount them from there. As a added bonus, you then can let the other machine do most of the building during updates of the main system. You could also move /usr/ports/ to this machine. You do need to edit the working directory in /etc/make.conf (copy it from /etc/defaults/ if it doesn't exist) becuase you don't want to mount the working directory. > > 2. just how much space should I need? I know that's a loaded question, but > I have another 2.5GB ide I could slave to the secondary port off the cdrom, > or swap some disks around with other networks or; hard to plan unless I can > make guesstimates about the future; is there a space planning guide around > somewhere. It depends on what you like to do. My kde workstaion has a 2 GB disk and du -h gives: /dev/ad0s1g 2.0G 1.5G 340M 82% /usr This doesn't inculde /usr/ports/, /usr/src/ and /usr/obj/, since I let antoher machine handle this. The later two are for upgrading your system. du -sh /usr/* gives: 287M X11R6 11M bin 85M compat 2.0K export1 1.5M games 145M home (one user) 8.8M include 28M lib 11M libdata 16M libexec 879M local 428M ports (exist on another computer; the minium is 250M) 334M src (exist on another computer) 435M obj (exist on another computer) 6.6M sbin 36M share For a workstation with X and sources you need 3G, without souces you need 2G. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 11:06:53 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A4E4A16A4CE for ; Sat, 15 Nov 2003 11:06:53 -0800 (PST) Received: from smtp06.wxs.nl (smtp06.wxs.nl [195.121.6.58]) by mx1.FreeBSD.org (Postfix) with ESMTP id 96F2543FCB for ; Sat, 15 Nov 2003 11:06:51 -0800 (PST) (envelope-from akruijff@www.kruijff.org) Received: from kruij557.speed.planet.nl (ipd50a97ba.speed.planet.nl [213.10.151.186]) by smtp06.wxs.nl (iPlanet Messaging Server 5.2 HotFix 1.14 (built Mar 18 2003)) with ESMTP id <0HOE00EERQAORI@smtp06.wxs.nl> for freebsd-questions@FreeBSD.org; Sat, 15 Nov 2003 20:04:02 +0100 (MET) Received: from Alex.lan (localhost [127.0.0.1]) by kruij557.speed.planet.nl (8.12.9p2/8.12.9) with ESMTP id hAFJ6pvI005043; Sat, 15 Nov 2003 20:06:51 +0100 (CET envelope-from akruijff@Alex.lan) Received: (from akruijff@localhost) by Alex.lan (8.12.9p2/8.12.9/Submit) id hAFJ6ojY005042; Sat, 15 Nov 2003 20:06:50 +0100 (CET envelope-from akruijff) Date: Sat, 15 Nov 2003 20:06:50 +0100 From: Alex de Kruijff In-reply-to: <20031115185507.GA4754@dds.nl> To: Marty Landman Message-id: <20031115190650.GB4754@dds.nl> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline User-Agent: Mutt/1.4.1i References: <6.0.0.22.0.20031115092348.06019cb0@pop.face2interface.com> <20031115185507.GA4754@dds.nl> cc: freebsd-questions@FreeBSD.org Subject: Re: failed X11 install, now what? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 19:06:53 -0000 On Sat, Nov 15, 2003 at 07:55:07PM +0100, Alex de Kruijff wrote: > On Sat, Nov 15, 2003 at 09:44:43AM -0500, Marty Landman wrote: > > This is what I found on the screen this morning after letting > > > > make all install clean > > Did you execute this in /usr/ports? Its better to select only the port > you like to have. > > > run all night: > > > > /usr: write failed, file system is full > > /usr/bin/tar: xc/fonts/util/KOI8-R.TXT: Wrote only 0 of 10240 bytes > > /usr/bin/tar: Skipping to next header > > /usr/bin/tar: Error exit delayed from previous errors > > *** Error code 1 > > > > Stop in /usr/ports/x11-fonts/XFree86-4-fontScalable. > > *** Error code 1 > > > > Stop in /usr/ports/x11/XFree86-4. > > # > > > > ............................ > > > > # df > > Filesystem 1K-blocks Used Avail Capacity Mounted on > > /dev/ad0s1a 128990 35170 83502 30% / > > /dev/ad0s1f 257998 284 237076 0% /tmp > > /dev/ad1s1e 2030062 2015906 -148248 108% /usr > > /dev/ad0s1e 257998 2762 234598 1% /var > > procfs 4 4 0 100% /proc > > Just as a tip 'df -h' give human readable output. > > > Which brings to mind a couple questions. > > > > 1. ad1 is a 2GB ide slaved to ad0 which is only 1GB - what must I do > > immediately to clear space on ad1 or is nothing impacted with the disk > > being over full? > > A port first fetches the sources it need and places these in > /usr/ports/distfiles/. You could empty this with: > rm -rf /usr/ports/distfiles/* > > You could also move /usr/src/ and /usr/obj to another machine and mount > them from there. As a added bonus, you then can let the other machine do > most of the building during updates of the main system. > > You could also move /usr/ports/ to this machine. You do need to edit the > working directory in /etc/make.conf (copy it from /etc/defaults/ if it > doesn't exist) becuase you don't want to mount the working directory. > > > > > 2. just how much space should I need? I know that's a loaded question, but > > I have another 2.5GB ide I could slave to the secondary port off the cdrom, > > or swap some disks around with other networks or; hard to plan unless I can > > make guesstimates about the future; is there a space planning guide around > > somewhere. > > It depends on what you like to do. My kde workstaion has a 2 GB disk and > du -h gives: > /dev/ad0s1g 2.0G 1.5G 340M 82% /usr > > This doesn't inculde /usr/ports/, /usr/src/ and /usr/obj/, since I let > antoher machine handle this. The later two are for upgrading your > system. > > du -sh /usr/* gives: > 287M X11R6 > 11M bin > 85M compat > 2.0K export1 > 1.5M games > 145M home (one user) > 8.8M include > 28M lib > 11M libdata > 16M libexec > 879M local > 428M ports (exist on another computer; the minium is 250M) > 334M src (exist on another computer) > 435M obj (exist on another computer) > 6.6M sbin > 36M share > > For a workstation with X and sources you need 3G, without souces you > need 2G. I do have a /tmp disk with 4G of space for building ports. Jdk requeres 2.5G and open office need 2 - 4 GB of space. -- Alex Articles based on solutions that I use: http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/ From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 11:17:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6A8FE16A4CE for ; Sat, 15 Nov 2003 11:17:19 -0800 (PST) Received: from rwcrmhc13.comcast.net (rwcrmhc13.comcast.net [204.127.198.39]) by mx1.FreeBSD.org (Postfix) with ESMTP id 707D843FE0 for ; Sat, 15 Nov 2003 11:17:15 -0800 (PST) (envelope-from fbsd-questions@trini0.org) Received: from hivemind.trini0.org (trini0.org[68.39.114.118]) by comcast.net (rwcrmhc13) with ESMTP id <2003111519171501500q6vcue>; Sat, 15 Nov 2003 19:17:15 +0000 Received: from gladiator.trini0.org (gladiator.trini0.org [192.168.0.3]) by hivemind.trini0.org (Postfix) with ESMTP id 995295D for ; Sat, 15 Nov 2003 14:17:14 -0500 (EST) From: Gerard Samuel To: questions@freebsd.org Date: Sat, 15 Nov 2003 14:17:14 -0500 User-Agent: KMail/1.5.4 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311151417.14480.fbsd-questions@trini0.org> Subject: DHCP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 19:17:19 -0000 A bit off topic, but any help would be appreciated. Im trying to setup DHCP for the first time. I set winXP to auto configure itself in the network section, but it still remains on the IP address that it was previously set at, and not obeying, the range of IP Addresses listed in dhcp.conf. The connection works, I can use the network, but looking to see if there are any errors in dhcp.conf file. Also, is there a way to not specify the MAC address, and have DHCP still work. For example, say a family member comes over with their laptop, can they just plug in and go?? Thanks for any pointers... dhcp.conf ----- # dhcpd.conf # # Sample configuration file for ISC dhcpd # # option definitions common to all supported networks... option domain-name "trini0.org"; option domain-name-servers 192.168.0.2; default-lease-time 600; max-lease-time 7200; # ad-hoc DNS update scheme - set to "none" to disable dynamic DNS updates. ddns-update-style none; subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.100 192.168.0.254; option routers 192.168.0.1; } #laptop host laptop { hardware ethernet 00:50:BA:7A:F0:A3; fixed-address laptop.trini0.org; } From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 11:35:42 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 41F5B16A4CE for ; Sat, 15 Nov 2003 11:35:42 -0800 (PST) Received: from floyd.gnulife.org (floyd.gnulife.org [199.86.41.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7423A43F75 for ; Sat, 15 Nov 2003 11:35:41 -0800 (PST) (envelope-from jamie@gnulife.org) Received: by floyd.gnulife.org (Postfix, from userid 1000) id 216974346B; Sat, 15 Nov 2003 13:35:52 -0600 (CST) Received: from localhost (localhost [127.0.0.1]) by floyd.gnulife.org (Postfix) with ESMTP id C64EE43469 for ; Sat, 15 Nov 2003 13:35:52 -0600 (CST) Date: Sat, 15 Nov 2003 13:35:52 -0600 (CST) From: Jamie To: freebsd-questions@freebsd.org Message-ID: <20031115132923.J5131-100000@floyd.gnulife.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: Fastest way to change IP addresses X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 19:35:42 -0000 I want to change the IP address from 200.80.11.7 to 200.80.11.8 on a FreeBSD machine as quickly as possible. Despite my efforts, I can only get the change to work by editing rc.conf and rebooting the machine. Isn't there a more elegant way?? The man page for ifconfig seems to cover changing IP ALIASES, but not the primary IP of an interface. In order to switch to 200.80.11.8 I've tried: 1) ifconfig de0 200.80.11.8 255.255.255.0 ifconfig -a then gives me: fxp0: flags=8843 mtu 1500 inet 200.80.11.8 netmask 0xffffff00 broadcast 200.88.11.255 ether 00:03:47:b1:d6:1c media: 10BaseT/UTP status: active But then I cannot ping the gateway, ping 200.80.11.1 5 Packets transmitted, 0 packets received 100% packet loss 2) I've tried editing /etc/rc.conf with the desired IP address. I then run: sh /etc/netstart It gives me the same output listed in (1), but I still cannot ping the gateway. The only way I can change the IP address is to make the change in /etc/rc.conf and reboot the whole machine. Then it works just fine. I would have to think there has GOT to be a better way. Am I doing something wrong somewhere, or is it just a requirement that you need to restart? Thanks, - Jamie Greetings from Minneapolis, MN, United States "A friend is someone who lets you have total freedom to be yourself." From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 11:40:08 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1C3AE16A4CE for ; Sat, 15 Nov 2003 11:40:08 -0800 (PST) Received: from web11008.mail.yahoo.com (web11008.mail.yahoo.com [216.136.131.58]) by mx1.FreeBSD.org (Postfix) with SMTP id 4CE7643F3F for ; Sat, 15 Nov 2003 11:40:07 -0800 (PST) (envelope-from fasi_74@yahoo.com) Message-ID: <20031115194007.83094.qmail@web11008.mail.yahoo.com> Received: from [202.141.239.5] by web11008.mail.yahoo.com via HTTP; Sat, 15 Nov 2003 11:40:07 PST Date: Sat, 15 Nov 2003 11:40:07 -0800 (PST) From: faisal gillani To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: OT : problems accessing sendmail from LAN X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 19:40:08 -0000 Well i have a PC running sendmail & pop3 deamon . when i try to access sendmail & pop3 services from locally "on the same pc"i am sucessful . but when i try to access smtp services of sendmail from over lan i can find it .. i mean the PC dont have any firewall installed .. when i port scan it from network i can see pop3 port open but sendmail smtp port isnt open .. what can be wrong ? i dont understand .. sendmail services arent accesable. also if you guys know any sendmail mailing list then tell me where i can ask this question .. sendmail questions email address didnt do any good . thanks ===== *šĪ., ļļ,.Īš*ĻĻĻ*Ī Allah-hu-Akber*šĪ., ļļ,.Īš*ĻĻ*Ī __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 11:41:22 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 79F8016A4CF for ; Sat, 15 Nov 2003 11:41:22 -0800 (PST) Received: from mail.lphp.org (APastourelles-107-1-20-229.w81-49.abo.wanadoo.fr [81.49.209.229]) by mx1.FreeBSD.org (Postfix) with ESMTP id E1FE943FDD for ; Sat, 15 Nov 2003 11:41:16 -0800 (PST) (envelope-from ajacoutot@lphp.org) Received: from srv01.lphp.local (localhost [127.0.0.1]) by mail.lphp.org (8.12.10/8.12.10) with ESMTP id hAFJbvpG043411 for ; Sat, 15 Nov 2003 20:37:57 +0100 (CET) (envelope-from ajacoutot@lphp.org) Received: (from www@localhost) by srv01.lphp.local (8.12.10/8.12.10/Submit) id hAFJbrDX043410 for freebsd-questions@freebsd.org; Sat, 15 Nov 2003 20:37:53 +0100 (CET) (envelope-from ajacoutot@lphp.org) Received: from stawin2k.lphp.local (stawin2k.lphp.local [192.168.0.4]) by webmail.lphp.org (IMP) with HTTP for ; Sat, 15 Nov 2003 20:37:53 +0100 Message-ID: <1068925073.3fb68091362ff@webmail.lphp.org> Date: Sat, 15 Nov 2003 20:37:53 +0100 From: Antoine Jacoutot To: "freebsd-questions@freebsd.org" MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.2.2 / FreeBSD-5.1 Subject: kdeinit problem with LDAP users X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 19:41:22 -0000 Hi ! I'm having a problem starting kde (with "exec startkde" in my .xinitrc). The screen freezes waiting for something that does not seem to load. I get the following error: kdeinit could't not start, please check your kde installation. Now, this happens for my users (homedir mounted with NFS) authenticated with LDAP, but if I creat a local testuser on the box, kde works fine... I configured pam.d/system, pam.d/login ans pam.d/kde for LDAP authentication. I can login fine, startx... anything but starting KDE. I also completely rebuilt KDE... doesn't work better. Any idea ? Thanks in advance. -- Antoine Jacoutot ajacoutot@lphp.org http://www.lphp.org PGP/GnuPG key: http://www.lphp.org/ressources/ajacoutot.asc From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 11:43:00 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BF10F16A4CE for ; Sat, 15 Nov 2003 11:43:00 -0800 (PST) Received: from sccrmhc13.comcast.net (sccrmhc13.comcast.net [204.127.202.64]) by mx1.FreeBSD.org (Postfix) with ESMTP id CF2E443F3F for ; Sat, 15 Nov 2003 11:42:59 -0800 (PST) (envelope-from fbsd-questions@trini0.org) Received: from hivemind.trini0.org (trini0.org[68.39.114.118]) by comcast.net (sccrmhc13) with ESMTP id <20031115194259016000vo7pe>; Sat, 15 Nov 2003 19:42:59 +0000 Received: from gladiator.trini0.org (gladiator.trini0.org [192.168.0.3]) by hivemind.trini0.org (Postfix) with ESMTP id 6444199 for ; Sat, 15 Nov 2003 14:42:58 -0500 (EST) From: Gerard Samuel To: questions@freebsd.org Date: Sat, 15 Nov 2003 14:42:58 -0500 User-Agent: KMail/1.5.4 References: <20031115132923.J5131-100000@floyd.gnulife.org> In-Reply-To: <20031115132923.J5131-100000@floyd.gnulife.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311151442.58235.fbsd-questions@trini0.org> Subject: Re: Fastest way to change IP addresses X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 19:43:00 -0000 On Saturday 15 November 2003 02:35 pm, Jamie wrote: > 1) ifconfig de0 200.80.11.8 255.255.255.0 > > ifconfig -a then gives me: > > fxp0: flags=8843 mtu 1500 > inet 200.80.11.8 netmask 0xffffff00 broadcast 200.88.11.255 > ether 00:03:47:b1:d6:1c > media: 10BaseT/UTP status: active > > > > But then I cannot ping the gateway, > > ping 200.80.11.1 > > 5 Packets transmitted, 0 packets received 100% packet loss Works fine for me -> gladiator# ifconfig fxp0: flags=8843 mtu 1500 inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:80:29:65:e2:96 media: Ethernet autoselect (100baseTX ) status: active lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 gladiator# ping -c 5 gatekeeper PING gatekeeper.trini0.org (192.168.0.1): 56 data bytes 64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=0.350 ms 64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.255 ms 64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.226 ms 64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=0.224 ms 64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=0.242 ms --- gatekeeper.trini0.org ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.224/0.259/0.350/0.047 ms gladiator# ifconfig fxp0 192.168.0.10 gladiator# ifconfig fxp0: flags=8843 mtu 1500 inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:80:29:65:e2:96 media: Ethernet autoselect (100baseTX ) status: active lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 gladiator# ping -c 5 gatekeeper PING gatekeeper.trini0.org (192.168.0.1): 56 data bytes 64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=0.337 ms 64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.225 ms 64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.249 ms 64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=0.224 ms 64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=0.224 ms --- gatekeeper.trini0.org ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.224/0.252/0.337/0.044 ms From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 12:12:40 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1038516A4CE for ; Sat, 15 Nov 2003 12:12:40 -0800 (PST) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id E680F43FE1 for ; Sat, 15 Nov 2003 12:12:36 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAFKCSBg073800 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sat, 15 Nov 2003 20:12:30 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAFKCSU6073799; Sat, 15 Nov 2003 20:12:28 GMT (envelope-from matthew) Date: Sat, 15 Nov 2003 20:12:28 +0000 From: Matthew Seaman To: Jamie Message-ID: <20031115201228.GA73634@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Jamie , freebsd-questions@freebsd.org References: <20031115132923.J5131-100000@floyd.gnulife.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="oyUTqETQ0mS9luUI" Content-Disposition: inline In-Reply-To: <20031115132923.J5131-100000@floyd.gnulife.org> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: freebsd-questions@freebsd.org Subject: Re: Fastest way to change IP addresses X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 20:12:40 -0000 --oyUTqETQ0mS9luUI Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Nov 15, 2003 at 01:35:52PM -0600, Jamie wrote: >=20 >=20 >=20 >=20 >=20 > I want to change the IP address from 200.80.11.7 to 200.80.11.8 > on a FreeBSD machine as quickly as possible. Despite my efforts, I can > only get the change to work by editing rc.conf and rebooting the machine. > Isn't there a more elegant way?? The man page for ifconfig seems to cover > changing IP ALIASES, but not the primary IP of an interface. >=20 >=20 >=20 > In order to switch to 200.80.11.8 I've tried: >=20 > 1) ifconfig de0 200.80.11.8 255.255.255.0 >=20 > ifconfig -a then gives me: >=20 > fxp0: flags=3D8843 mtu 1500 > inet 200.80.11.8 netmask 0xffffff00 broadcast 200.88.11.255 > ether 00:03:47:b1:d6:1c > media: 10BaseT/UTP status: active >=20 >=20 >=20 > But then I cannot ping the gateway, Yes -- you're doing everything right in order to change the IP number. Except that you seem confused as to whether the network interface is de0 or fxp0 -- I assume that's just a flub in your e-mail, and not what you've actually done... If it isn't that, then the problem may lie within your network gear. This may have cached the MAC address belonging to your machine as associated with first IP number and is getting confused by the renumbering. If you wait for a while it should eventually sort itself out. How long you have to wait depends on a number of things including the make of routers and switches -- it could be as long as 20 minutes. One way that you might get round this problem would be to add the new address as an alias: # ifconfig de0 inet 200.80.11.8 netmask 0xffffffff alias In theory you could then go on to swap the netmasks for the two addresses, thus making the second one the primary address, and then delete the first address. Possibly with some sort of delay between each operation to let verything adjust. But no guarrantees that will work. You'll have to experiment. Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --oyUTqETQ0mS9luUI Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/toisdtESqEQa7a0RAgRxAJ971/cbwMiTiP+Xj9P4Ui5XCR1QngCff5a2 W0k/9BWahWECUezNyAYKcOU= =E0eY -----END PGP SIGNATURE----- --oyUTqETQ0mS9luUI-- From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 12:27:01 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9135116A4CE for ; Sat, 15 Nov 2003 12:27:01 -0800 (PST) Received: from floyd.gnulife.org (floyd.gnulife.org [199.86.41.27]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4761D43FA3 for ; Sat, 15 Nov 2003 12:27:00 -0800 (PST) (envelope-from jamie@gnulife.org) Received: by floyd.gnulife.org (Postfix, from userid 1000) id A9C7C4345E; Sat, 15 Nov 2003 14:27:10 -0600 (CST) Received: from localhost (localhost [127.0.0.1]) by floyd.gnulife.org (Postfix) with ESMTP id 9B78D43351; Sat, 15 Nov 2003 14:27:10 -0600 (CST) Date: Sat, 15 Nov 2003 14:27:10 -0600 (CST) From: Jamie To: Matthew Seaman In-Reply-To: <20031115201228.GA73634@happy-idiot-talk.infracaninophile.co.uk> Message-ID: <20031115142347.U5131-100000@floyd.gnulife.org> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII cc: freebsd-questions@freebsd.org Subject: Re: Fastest way to change IP addresses X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 20:27:01 -0000 On Sat, 15 Nov 2003, Matthew Seaman wrote: > On Sat, Nov 15, 2003 at 01:35:52PM -0600, Jamie wrote: > > > > > > > > > > > > I want to change the IP address from 200.80.11.7 to 200.80.11.8 > > on a FreeBSD machine as quickly as possible. Despite my efforts, I can > > only get the change to work by editing rc.conf and rebooting the machine. > > Isn't there a more elegant way?? The man page for ifconfig seems to cover > > changing IP ALIASES, but not the primary IP of an interface. > > > > > > > > In order to switch to 200.80.11.8 I've tried: > > > > 1) ifconfig de0 200.80.11.8 255.255.255.0 > > > > ifconfig -a then gives me: > > > > fxp0: flags=8843 mtu 1500 > > inet 200.80.11.8 netmask 0xffffff00 broadcast 200.88.11.255 > > ether 00:03:47:b1:d6:1c > > media: 10BaseT/UTP status: active > > > > > > > > But then I cannot ping the gateway, > > Yes -- you're doing everything right in order to change the IP number. > Except that you seem confused as to whether the network interface is > de0 or fxp0 -- I assume that's just a flub in your e-mail, and not > what you've actually done... > > If it isn't that, then the problem may lie within your network gear. > This may have cached the MAC address belonging to your machine as > associated with first IP number and is getting confused by the > renumbering. If you wait for a while it should eventually sort itself > out. How long you have to wait depends on a number of things > including the make of routers and switches -- it could be as long as > 20 minutes. > > One way that you might get round this problem would be to add the new > address as an alias: > > # ifconfig de0 inet 200.80.11.8 netmask 0xffffffff alias > > In theory you could then go on to swap the netmasks for the two > addresses, thus making the second one the primary address, and then > delete the first address. Possibly with some sort of delay between > each operation to let verything adjust. But no guarrantees that will > work. You'll have to experiment. > > Cheers, > > Matthew > I found another machine here running a newer version of FreeBSD and tried it. It worked the way it should. The old machine was running FreeBSD 3.4, and the new machine is running 4.8. Maybe the problem has to do with software versions. And yes, that was a flub in the email. Thanks for the suggestions, - Jamie > -- > Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks > Savill Way > PGP: http://www.infracaninophile.co.uk/pgpkey Marlow > Tel: +44 1628 476614 Bucks., SL7 1TH UK > Greetings from Minneapolis, MN, United States "A friend is someone who lets you have total freedom to be yourself." From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 12:46:21 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 12A5016A4CE for ; Sat, 15 Nov 2003 12:46:21 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 1B98A43F85 for ; Sat, 15 Nov 2003 12:46:20 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hAFKk7p6002188; Sat, 15 Nov 2003 15:46:09 -0500 (EST) Message-Id: <6.0.0.22.0.20031115153052.01b10f40@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sat, 15 Nov 2003 15:46:14 -0500 To: Alex de Kruijff From: Marty Landman In-Reply-To: <20031115185507.GA4754@dds.nl> References: <6.0.0.22.0.20031115092348.06019cb0@pop.face2interface.com> <20031115185507.GA4754@dds.nl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed cc: freebsd-questions@FreeBSD.org Subject: Re: failed X11 install, now what? X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 20:46:21 -0000 At 01:55 PM 11/15/2003, Alex de Kruijff wrote: >On Sat, Nov 15, 2003 at 09:44:43AM -0500, Marty Landman wrote: > > > make all install clean > >Did you execute this in /usr/ports? No, I forgot to say first cd'd to the X11/XFree86-4 dir. >Just as a tip 'df -h' give human readable output. Thanks, that helps. >You could also move /usr/src/ and /usr/obj to another machine and mount >them from there. Ok, I did rm -r /usr/ports/x11 and now /usr's down to 87%. That's breathing room at least. I think pacing this learning experience is a good thing; I've got Apache, PostgreSQL and Lynx up and running and that's plenty with Perl for starters. The more digging I do in the Handbook the better off I'm getting so I think I'll try and avoid trouble for awhile and stay away from the ports collection. :) >du -sh /usr/* gives: Alex, could you recommend a way for me to filter out anything under a certain threshold? Grep wouldn't do the trip for this, right? IOW list everything on /usr greater than say 50MB? Or am I best off grep'ing the du output to a little perl app since that's the language I'm most comfortable with? Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 13:13:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 216CA16A4CE for ; Sat, 15 Nov 2003 13:13:16 -0800 (PST) Received: from rwcrmhc13.comcast.net (rwcrmhc13.comcast.net [204.127.198.39]) by mx1.FreeBSD.org (Postfix) with ESMTP id 7D00343F75 for ; Sat, 15 Nov 2003 13:13:15 -0800 (PST) (envelope-from fbsd-questions@trini0.org) Received: from hivemind.trini0.org (trini0.org[68.39.114.118]) by comcast.net (rwcrmhc13) with ESMTP id <2003111521131501500nnrjve>; Sat, 15 Nov 2003 21:13:15 +0000 Received: from gladiator.trini0.org (gladiator.trini0.org [192.168.0.3]) by hivemind.trini0.org (Postfix) with ESMTP id 8499C5D for ; Sat, 15 Nov 2003 16:13:14 -0500 (EST) From: Gerard Samuel To: questions@freebsd.org Date: Sat, 15 Nov 2003 16:13:14 -0500 User-Agent: KMail/1.5.4 References: <200311151417.14480.fbsd-questions@trini0.org> In-Reply-To: <200311151417.14480.fbsd-questions@trini0.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311151613.14278.fbsd-questions@trini0.org> Subject: Re: DHCP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 21:13:16 -0000 On Saturday 15 November 2003 02:17 pm, Gerard Samuel wrote: > A bit off topic, but any help would be appreciated. > Im trying to setup DHCP for the first time. > I set winXP to auto configure itself in the network section, but it > still remains on the IP address that it was previously set at, and not > obeying, the range of IP Addresses listed in dhcp.conf. > The connection works, I can use the network, but looking to see if there > are any errors in dhcp.conf file. I figured out why the IP Address wasn't changing via DHCP. There was an entry for the laptop in DNS, and it seems that DHCP accepted only the DNS value. Once I took it out, restarted DNS, the laptop picked up a new IP Address. So Ill see how it behaves from here. > > Also, is there a way to not specify the MAC address, and have DHCP still > work. For example, say a family member comes over with their laptop, can > they just plug in and go?? Still reading up on this, but any pointers would be appreciated... From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 14:03:14 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 74DA816A4CE for ; Sat, 15 Nov 2003 14:03:14 -0800 (PST) Received: from scode.mine.nu (c-b0de71d5.05-152-7570701.cust.bredbandsbolaget.se [213.113.222.176]) by mx1.FreeBSD.org (Postfix) with ESMTP id A0D2443FAF for ; Sat, 15 Nov 2003 14:03:13 -0800 (PST) (envelope-from peter.schuller@infidyne.com) Received: from localhost (localhost [127.0.0.1]) by scode.mine.nu (Postfix) with ESMTP id DC9693398E; Sat, 15 Nov 2003 23:07:17 +0100 (CET) From: Peter Schuller To: Gerard Samuel , questions@freebsd.org Date: Sat, 15 Nov 2003 23:07:17 +0100 User-Agent: KMail/1.5.4 References: <200311151417.14480.fbsd-questions@trini0.org> <200311151613.14278.fbsd-questions@trini0.org> In-Reply-To: <200311151613.14278.fbsd-questions@trini0.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311152307.17561.peter.schuller@infidyne.com> Subject: Re: DHCP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 22:03:14 -0000 > > Also, is there a way to not specify the MAC address, and have DHCP still > > work. For example, say a family member comes over with their laptop, can > > they just plug in and go?? > > Still reading up on this, but any pointers would be appreciated... I may be misunderstanding your needs, but typically IP addresses are assigned dynamically. The host {} section for the laptop is only needed if you need special settings for that particular host - such as the ethernet address. Unless you need the laptop to always have that certain hostname, you should just be able to remove the host {} section and any devices, including the laptop, should get an IP address from the pool. -- / Peter Schuller, InfiDyne Technologies HB PGP userID: 0xE9758B7D or 'Peter Schuller ' Key retrieval: Send an E-Mail to getpgpkey@scode.org E-Mail: peter.schuller@infidyne.com Web: http://www.scode.org From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 14:04:37 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6213E16A4CE for ; Sat, 15 Nov 2003 14:04:37 -0800 (PST) Received: from web20512.mail.yahoo.com (web20512.mail.yahoo.com [216.136.175.20]) by mx1.FreeBSD.org (Postfix) with SMTP id CF63C43F3F for ; Sat, 15 Nov 2003 14:04:36 -0800 (PST) (envelope-from omsbud@yahoo.com) Message-ID: <20031115220436.27624.qmail@web20512.mail.yahoo.com> Received: from [24.189.5.51] by web20512.mail.yahoo.com via HTTP; Sat, 15 Nov 2003 14:04:36 PST Date: Sat, 15 Nov 2003 14:04:36 -0800 (PST) From: omsbud om To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: Network setup for router X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 22:04:37 -0000 What's the proper way to setup a network w/ freebsd as the router and network windows machines to it? I got a network setup working, but I'm not sure whether I went about it correctly. I have two 3com nics in the router (xl0 and xl1), xl0 is connected directly to the cable modem w/ a CAT5 cable, xl1 is connected is connected to a port of the hub w/ a crossover cable. Then I just connect the remaining windows machines into the hub and set the local private addresses in windows and put the freebsd router as the gateway. On the freebsd machine I run natd -n xl0 and ifconfig_xl0="DHCP". The media type for xl0 is set to 100BaseTX and 10BaseT/UTP for xl1, 100BaseTX for xl1 sets the status for that interface to "no carrier". I can't get the network running at 100mbps for some reason. I also have some weak rules for ipfw as suggested in the natd manual page. Another thing is that when I ran a speed test from a machine that was directly connected to the cable modem, the speeds reported were 5 times faster then when I run a speed test from a windows machine. Any reason for that reported speed decrease? Any suggestions on network setup or on how to get greater performance? Thanks. Also, I'm not subscribed to the list, please make sure to direct replies to my email as well. __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 14:31:03 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A458316A4CE for ; Sat, 15 Nov 2003 14:31:03 -0800 (PST) Received: from mxsf20.cluster1.charter.net (mxsf20.cluster1.charter.net [209.225.28.220]) by mx1.FreeBSD.org (Postfix) with ESMTP id CFD8A43F85 for ; Sat, 15 Nov 2003 14:31:02 -0800 (PST) (envelope-from chowse@charter.net) Received: from curlyjoe.howse.homeunix.net (jackson-66-168-145-25.midtn.chartertn.net [66.168.145.25]) hAFMUL8D097233 for ; Sat, 15 Nov 2003 17:30:21 -0500 (EST) (envelope-from chowse@charter.net) From: Charles Howse To: Questions Date: Sat, 15 Nov 2003 16:30:21 -0600 User-Agent: KMail/1.5.4 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311151630.21071.chowse@charter.net> Subject: bsd-jdk14-patches-4.tar.gz X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 22:31:03 -0000 Hi, While attempting to install Open Office, I got a stop error: ===> jdk-1.4.1p4_1 : The source distribution exists on your system, but due to licensing restrictions you still need to download the patchset, bsd-jdk14-patches-4.tar.gz, from http://www.eyesbeyond.com/freebsddom/java/jdk14.html. Please place the patchset in /usr/ports/distfiles. .*** Error code 1 When I go to get the patch at the referenced site, I get a 'malformed url' error, and can't download it. I've Googled for the patch, can't find anything. It this file available anywhere else? I searched the list archives for the filename, and for Open Office, no joy. Is there a workaround for this stop error? -- Thanks, Charles [NOTE: Please send in text format only! HTML content is filtered out!] From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:02:13 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id A9AF316A4CE for ; Sat, 15 Nov 2003 15:02:13 -0800 (PST) Received: from mxsf07.cluster1.charter.net (mxsf07.cluster1.charter.net [209.225.28.207]) by mx1.FreeBSD.org (Postfix) with ESMTP id CB48C43FBD for ; Sat, 15 Nov 2003 15:02:12 -0800 (PST) (envelope-from chowse@charter.net) Received: from curlyjoe.howse.homeunix.net (jackson-66-168-145-25.midtn.chartertn.net [66.168.145.25]) hAFN0iIf028352 for ; Sat, 15 Nov 2003 18:00:44 -0500 (EST) (envelope-from chowse@charter.net) From: Charles Howse To: freebsd-questions@freebsd.org Date: Sat, 15 Nov 2003 17:00:42 -0600 User-Agent: KMail/1.5.4 References: <200311151630.21071.chowse@charter.net> In-Reply-To: <200311151630.21071.chowse@charter.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311151700.42163.chowse@charter.net> Subject: Re: bsd-jdk14-patches-4.tar.gz X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:02:13 -0000 On Saturday 15 November 2003 04:30 pm, Charles Howse wrote: > Hi, > While attempting to install Open Office, I got a stop error: > > ===> jdk-1.4.1p4_1 : > The source distribution exists on your system, but due to > licensing restrictions you still need to download the > patchset, bsd-jdk14-patches-4.tar.gz, from > http://www.eyesbeyond.com/freebsddom/java/jdk14.html. > Please place the patchset in /usr/ports/distfiles. > .*** Error code 1 > > > When I go to get the patch at the referenced site, I get a 'malformed url' > error, and can't download it. > > I've Googled for the patch, can't find anything. > It this file available anywhere else? > I searched the list archives for the filename, and for Open Office, no joy. > Is there a workaround for this stop error? I was able to get the patch using Mozilla instead of Konqueror web browser. Strange....? From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:04:52 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C4B1516A4CE for ; Sat, 15 Nov 2003 15:04:52 -0800 (PST) Received: from smtp.infracaninophile.co.uk (ns0.infracaninophile.co.uk [81.2.69.218]) by mx1.FreeBSD.org (Postfix) with ESMTP id AF1BC43FE0 for ; Sat, 15 Nov 2003 15:04:50 -0800 (PST) (envelope-from m.seaman@infracaninophile.co.uk) Received: from happy-idiot-talk.infracaninophile.co.uk (localhost [127.0.0.1]) hAFN4fBg075105 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sat, 15 Nov 2003 23:04:42 GMT (envelope-from matthew@happy-idiot-talk.infracaninophile.co.uk) Received: (from matthew@localhost)id hAFN4f6j075104; Sat, 15 Nov 2003 23:04:41 GMT (envelope-from matthew) Date: Sat, 15 Nov 2003 23:04:41 +0000 From: Matthew Seaman To: Charles Howse Message-ID: <20031115230441.GA74955@happy-idiot-talk.infracaninophile.co.uk> Mail-Followup-To: Matthew Seaman , Charles Howse , Questions References: <200311151630.21071.chowse@charter.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="bg08WKrSYDhXBjb5" Content-Disposition: inline In-Reply-To: <200311151630.21071.chowse@charter.net> User-Agent: Mutt/1.5.5.1i X-Spam-Status: No, hits=-4.9 required=5.0 tests=BAYES_00 autolearn=ham version=2.60 X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on happy-idiot-talk.infracaninophile.co.uk cc: Questions Subject: Re: bsd-jdk14-patches-4.tar.gz X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:04:52 -0000 --bg08WKrSYDhXBjb5 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Nov 15, 2003 at 04:30:21PM -0600, Charles Howse wrote: > When I go to get the patch at the referenced site, I get a 'malformed url= '=20 > error, and can't download it. Try this one: http://www.eyesbeyond.com/freebsddom/java/JDK14SCSLConfirm.html Cheers, Matthew --=20 Dr Matthew J Seaman MA, D.Phil. 26 The Paddocks Savill Way PGP: http://www.infracaninophile.co.uk/pgpkey Marlow Tel: +44 1628 476614 Bucks., SL7 1TH UK --bg08WKrSYDhXBjb5 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/trEJdtESqEQa7a0RAkLpAJ45Gg+xyU2GaammAMjFk8BiUpjWfgCfYbSL Sr43WXIncuTnn+1klXRiU+0= =Cjli -----END PGP SIGNATURE----- --bg08WKrSYDhXBjb5-- From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:09:11 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 1059416A4CF for ; Sat, 15 Nov 2003 15:09:11 -0800 (PST) Received: from obsecurity.dyndns.org (adsl-63-207-60-234.dsl.lsan03.pacbell.net [63.207.60.234]) by mx1.FreeBSD.org (Postfix) with ESMTP id B2A9443F75 for ; Sat, 15 Nov 2003 15:09:09 -0800 (PST) (envelope-from kris@obsecurity.org) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 1C87066B80; Sat, 15 Nov 2003 15:09:09 -0800 (PST) Date: Sat, 15 Nov 2003 15:09:09 -0800 From: Kris Kennaway To: Charles Howse Message-ID: <20031115230908.GA12888@xor.obsecurity.org> References: <200311151630.21071.chowse@charter.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="6TrnltStXW4iwmi0" Content-Disposition: inline In-Reply-To: <200311151630.21071.chowse@charter.net> User-Agent: Mutt/1.4.1i cc: Questions Subject: Re: bsd-jdk14-patches-4.tar.gz X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:09:11 -0000 --6TrnltStXW4iwmi0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Nov 15, 2003 at 04:30:21PM -0600, Charles Howse wrote: > Hi, > While attempting to install Open Office, I got a stop error: >=20 > =3D=3D=3D> jdk-1.4.1p4_1 : > The source distribution exists on your system, but due to > licensing restrictions you still need to download the > patchset, bsd-jdk14-patches-4.tar.gz, from > http://www.eyesbeyond.com/freebsddom/java/jdk14.html. > Please place the patchset in /usr/ports/distfiles. > .*** Error code 1 >=20 >=20 > When I go to get the patch at the referenced site, I get a 'malformed url= '=20 > error, and can't download it. >=20 > I've Googled for the patch, can't find anything. > It this file available anywhere else? > I searched the list archives for the filename, and for Open Office, no jo= y. > Is there a workaround for this stop error? Don't include the '.' which is not part of the URL. Kris --6TrnltStXW4iwmi0 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/trIUWry0BWjoQKURAoNyAKCU++XdQDivsn92wXc8NlVuoS9+nwCgnN6P ahEAr/T42dKk7sVwxXjZ0gs= =JJlx -----END PGP SIGNATURE----- --6TrnltStXW4iwmi0-- From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:23:24 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D5A8116A4CE for ; Sat, 15 Nov 2003 15:23:24 -0800 (PST) Received: from usstp09.itcs.purdue.edu (usstp09.itcs.purdue.edu [128.210.5.248]) by mx1.FreeBSD.org (Postfix) with ESMTP id E491A43F85 for ; Sat, 15 Nov 2003 15:23:23 -0800 (PST) (envelope-from germain@purdue.edu) Received: from localhost (wm-cpu3.itcs.purdue.edu [128.210.11.235]) hAFNNNQg006873 for ; Sat, 15 Nov 2003 18:23:23 -0500 Received: from hill-a-188.resnet.purdue.edu (hill-a-188.resnet.purdue.edu [128.211.204.188]) by webmail.purdue.edu (IMP) with HTTP for ; Sat, 15 Nov 2003 18:23:19 -0500 Message-ID: <1068938599.3fb6b5674e12f@webmail.purdue.edu> Date: Sat, 15 Nov 2003 18:23:19 -0500 From: germain@purdue.edu To: FreeBSD-Questions@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Internet Messaging Program (IMP) 3.2-cvs X-Virus-Scanned: by amavisd-new on Purdue Mailhub Subject: Dual Booting FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:23:25 -0000 Hello, I have recently come into possessing a new hard drive which is 40 gigs. I also have a 160 Gig hard drive with an unformatted partition that is approx. 40 gigs. Would it be easier to install FreeBSD on the unformatted partition or the new hard drive for the purpose of dual booting with xp? Also, does anyone know how to set up a dual boot system or know of a good guide to doing so? Thanks in advance, Edward Germain From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:27:43 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C3CF416A4CE for ; Sat, 15 Nov 2003 15:27:43 -0800 (PST) Received: from camry.SiddiquiFamily.Org (adsl-208-191-179-4.dsl.hstntx.swbell.net [208.191.179.4]) by mx1.FreeBSD.org (Postfix) with ESMTP id CB37743FE0 for ; Sat, 15 Nov 2003 15:27:42 -0800 (PST) (envelope-from list@SiddiquiFamily.org) Received: from 192.168.7.100 ([192.168.7.100]) by camry.SiddiquiFamily.Org with Microsoft SMTPSVC(6.0.3790.0); Sat, 15 Nov 2003 17:24:39 -0600 From: List To: freebsd-questions@freebsd.org Date: Sat, 15 Nov 2003 17:28:24 +0000 User-Agent: KMail/1.5.2 References: <1068914909.17752.2.camel@ufretin.no-ip.org> In-Reply-To: <1068914909.17752.2.camel@ufretin.no-ip.org> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311151728.25099.list@SiddiquiFamily.org> X-OriginalArrivalTime: 15 Nov 2003 23:24:39.0809 (UTC) FILETIME=[A4360710:01C3ABCF] Subject: Re: OpenOffice 1.1 + gtk2 look n feel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:27:43 -0000 Man, I am installing Openoffice. I has been more then 10 hrs.. and the install is still going. Is this normal behavior? P3 1gig mem.... Laptop thanks On Saturday 15 November 2003 04:48 pm, Yannick FAHAM wrote: > Is anybody knows how to run openoffice with the gnome/gtk2 look and feel > like we can see it in ximian-desktop screenshots ? From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:34:02 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 82E8516A4CE for ; Sat, 15 Nov 2003 15:34:02 -0800 (PST) Received: from quipo.it (mx.quipo.it [212.43.108.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id C5C9443F85 for ; Sat, 15 Nov 2003 15:34:00 -0800 (PST) (envelope-from brunoc@quipo.it) Received: from computer [62.94.195.13] by quipo.it with ESMTP (SMTPD32-7.15) id A7E470F700C2; Sun, 16 Nov 2003 00:33:56 +0100 Message-ID: <047701c3abcf$45647fa0$0dc35e3e@computer> From: "Brunoc@quipo.it" To: "Konrad Heuer" References: <20031111130544.F28128@gwdu60.gwdg.de> Date: Sat, 15 Nov 2003 23:15:38 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-Declude-Sender: brunoc@quipo.it [62.94.195.13] X-Declude-Spoolname: Db7e470f700c2498d.SMD cc: freebsd-questions@freebsd.org Subject: Re: newbie: vi - go to previous file X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:34:02 -0000 X-List-Received-Date: Sat, 15 Nov 2003 23:34:02 -0000 On Tuesday, November 11, 2003, Konrad Heuer wrote: >On Tue, 11 Nov 2003, Zhang Weiwu wrote: > >>Hello. I am using the BSD's vi not vim. >> >>I learned from :exusage that :N is to swich to the next file in = argument >>list while :P swich to the previous file. :N woks fine, while :P does >>nothing. >> >>say, I run ">vi file1 file2", which opens file1, :N begin to edit = file2, >>then I press :P, I thought I should go to file1, but I'm still editing >>file2. >try :prev - :p seems to be an abbreviation for a different command. > >Regards Konrad Heuer (kheuer2@gwdg.de) ____ ___ _______ When you edit multiple files in vi, (whether you start from the command line like "vi file1 file 2. . . ",=20 or by starting vi with a single file or with no file argument at all,=20 in which case you can load a file from inside the vi with the=20 vi command ':n '), you can cycle from a file to the next=20 (and when you are at the last,you restart with=20 the first and so on,like in a "ring")=20 inside the editor with the command ':n#' (yes, ":n#") Cheers Bruno --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:34:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 3720316A4CE for ; Sat, 15 Nov 2003 15:34:16 -0800 (PST) Received: from quipo.it (mx.quipo.it [212.43.108.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id CC6E043F93 for ; Sat, 15 Nov 2003 15:34:14 -0800 (PST) (envelope-from brunoc@quipo.it) Received: from computer [62.94.195.13] by quipo.it with ESMTP (SMTPD32-7.15) id A7E570F700C2; Sun, 16 Nov 2003 00:33:57 +0100 Message-ID: <047801c3abcf$484ea740$0dc35e3e@computer> From: "Brunoc@quipo.it" To: "Marty Landman" References: <6.0.0.22.0.20031114190056.11752140@pop.face2interface.com> Date: Sun, 16 Nov 2003 00:15:43 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-Declude-Sender: brunoc@quipo.it [62.94.195.13] X-Declude-Spoolname: Db7e570f700c24efb.SMD cc: freebsd-questions@freebsd.org Subject: Re: how to map pfkeys to screen -r cmds X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:34:16 -0000 On Saturday, November 15, 2003,Marty Landman wrote: >Thought I recently read something in the Handbook about being able to=20 >switch screens easily using the pfkeys but didn't see the how of it. = Today=20 >learned the screen cmd following a tip from the fbds Diary but the=20 >usefulness would be greatly enhanced with some quick way to go through = the=20 >screens. How hard is this effect to set up, either with or w/o screens? = >Also I'm ssh'ing into my session in case that matters. >Marty Landman Face 2 Interface Inc 845-679-9387 >Sign On Required: Web membership software for your site >Make a Website: http://face2interface.com/Home/Demo.shtml Marty, to switch between screens (there are eight pre-configured virtual screens on FreeBSD,named /dev/stty0 to /dev/stty7, stty0 being also the console output for system messages), you use the key combination Alt-Ctrl-F1 to Alt-Ctrl-F8, or Ctrl-F1 to Ctrl-F8 (the latter ones do not work if you want to switch to screen 0-8 while you are in your desktop=20 environment or window manager). If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #10 (you can change the virtual screens in the /etc/ttys file). So remember that in case you switch to any of the virtual screens 0 to 7,if you want to resume your X session (your window manager or desktop environment), you have to press Alt-F10. Best regards Bruno --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:46:32 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 113E016A4CE for ; Sat, 15 Nov 2003 15:46:32 -0800 (PST) Received: from siralan.org (12-223-227-231.client.insightbb.com [12.223.227.231]) by mx1.FreeBSD.org (Postfix) with ESMTP id 10BA343F93 for ; Sat, 15 Nov 2003 15:46:31 -0800 (PST) (envelope-from mikes@siralan.org) Received: from siralan.org (localhost [127.0.0.1]) by siralan.org (8.12.10/8.12.10) with ESMTP id hAFNkTss035957; Sat, 15 Nov 2003 18:46:29 -0500 (EST) (envelope-from mikes@siralan.org) Received: (from mikes@localhost) by siralan.org (8.12.10/8.12.10/Submit) id hAFNkSv9035956; Sat, 15 Nov 2003 18:46:28 -0500 (EST) (envelope-from mikes) From: "Michael L. Squires" Message-Id: <200311152346.hAFNkSv9035956@siralan.org> To: germain@purdue.edu Date: Sat, 15 Nov 2003 18:46:27 -0500 (EST) In-Reply-To: <1068938599.3fb6b5674e12f@webmail.purdue.edu> from "germain@purdue.edu" at Nov 15, 2003 06:23:19 PM X-Mailer: ELM [version 2.5 PL6] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit cc: FreeBSD questions Subject: Re: Dual Booting FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:46:32 -0000 > 40 gigs. Would it be easier to install FreeBSD on the unformatted partition > or the new hard drive for the purpose of dual booting with xp? Also, does > anyone know how to set up a dual boot system or know of a good guide to doing > so? I have one system which uses XOSL with separate disks (SCSI) for FreeBSD 5.1-CURRENT and XP, and another using the standard FBSD boot manager where the primary disk is all XP and FreeBSD uses the first partition of the secondary drive. Both work fine. Mike Squires From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 15:57:12 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2D6A616A4CE for ; Sat, 15 Nov 2003 15:57:12 -0800 (PST) Received: from host40.ipowerweb.com (host40.ipowerweb.com [12.129.225.140]) by mx1.FreeBSD.org (Postfix) with ESMTP id 5EA5B43FB1 for ; Sat, 15 Nov 2003 15:57:11 -0800 (PST) (envelope-from webmaster@monzell.com) Received: from adsl-80-81-233.asm.bellsouth.net ([65.80.81.233] helo=[172.16.255.7]) by host40.ipowerweb.com with asmtp (Exim 3.36 #1) id 1ALAHm-0004xE-00; Sat, 15 Nov 2003 15:57:02 -0800 From: Rilindo Foster To: List In-Reply-To: <200311151728.25099.list@SiddiquiFamily.org> References: <1068914909.17752.2.camel@ufretin.no-ip.org> <200311151728.25099.list@SiddiquiFamily.org> Content-Type: text/plain Message-Id: <1068940725.94034.0.camel@tsukasa> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Sat, 15 Nov 2003 18:58:45 -0500 Content-Transfer-Encoding: 7bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - host40.ipowerweb.com X-AntiAbuse: Original Domain - freebsd.org X-AntiAbuse: Originator/Caller UID/GID - [0 0] / [0 0] X-AntiAbuse: Sender Address Domain - monzell.com cc: freebsd-questions@freebsd.org Subject: Re: OpenOffice 1.1 + gtk2 look n feel X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 15 Nov 2003 23:57:12 -0000 Yes, it actually takes that long - it took me about over a day on my machine (and that's only because my compiler crashed twice). On Sat, 2003-11-15 at 12:28, List wrote: > Man, I am installing Openoffice. I has been more then 10 hrs.. and the install > is still going. Is this normal behavior? > > P3 1gig mem.... Laptop > > thanks > > > On Saturday 15 November 2003 04:48 pm, Yannick FAHAM wrote: > > Is anybody knows how to run openoffice with the gnome/gtk2 look and feel > > like we can see it in ximian-desktop screenshots ? > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- ----- Rilindo Foster http://monzell.com AIM: rilindo From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 16:10:20 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 11CCD16A4CE; Sat, 15 Nov 2003 16:10:20 -0800 (PST) Received: from server.zaleo.homeunix.net (fia99-99.dsl.hccnet.nl [62.251.99.99]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2910743F85; Sat, 15 Nov 2003 16:10:15 -0800 (PST) (envelope-from FreeBSD@Zaleo.nl) Received: from zeo.Zaleo.nl (zeo [192.168.0.2] (may be forged)) hAG09kV9010268; Sun, 16 Nov 2003 01:09:47 +0100 (CET) (envelope-from FreeBSD@Zaleo.nl) Message-Id: <6.0.0.22.2.20031116010409.03ae9f98@pop3.zaleo.homeunix.net> X-Sender: freebsd@pop3.zaleo.homeunix.net (Unverified) X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sun, 16 Nov 2003 01:10:13 +0100 To: freebsd-questions@freebsd.org From: FreeBSD-Lis Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=====================_52938843==_" cc: Zeo@Zaleo.homeunix.net cc: nobutaka@freebsd.org Subject: Problem with port xine-0.9.22_2 after a CVS update form 5.0 to 5.1 X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 00:10:20 -0000 --=====================_52938843==_ Content-Type: text/plain; charset="us-ascii"; format=flowed Dear all, As mentioned after the make install command I have send a mail to nobutaka@FreeBSD.org, but hoping on a clear answer for a newbie I send this to freebsd-questions. Hope on a replay with my normal E-Mail adres on CC : Zeo@Zaleo.homeunix.net, thanks. Problems installing port xine-0.9.22_2 after a CVS update form 5.0 to 5.1, have tried the downloaded port and the port in my /usr/ports directory. I have installed port libxine-1.0.r2 and I have tried libxine-1.0.r1 and libxine-1.0.r0 but this generates the same error while building xine. Hope you can provide a answer or a port that I can build, I'm using my FreeBSD box as a multimedia unit to watch movies and listen to MP3 files in my living room. X = KDE 3.1 not gnome ! Hope to hear form you, kind regards, Zeo Smeijsters checking for XINE-LIB version >= 1.0.0... no *** Could not run XINE test program, checking why... *** The test program failed to compile or link. See the file config.log for the *** exact error that occured. This usually means XINE was incorrectly installed *** or that you have moved XINE since it was installed. In the latter case, you *** may want to edit the xine-config script: /usr/local/bin/xine-config configure: error: *** You should install xine-lib first *** ===> Script "configure" failed unexpectedly. Please report the problem to nobutaka@FreeBSD.org [maintainer] and attach the "/usr/home/file_server/FreeBSD/xine/work/xine-ui-0.9.22/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 My /var/db/pkg ORBit-0.5.17_1 libmikmod-esound-3.1.10_1 ORBit2-2.8.2 libmng-1.0.5_1 Sablot-1.0 libmovtar-0.1.3 XFree86-4.3.0,1 libmpeg2-0.3.1_1 XFree86-FontServer-4.3.0_2 libnet-1.0.2a,1 XFree86-Server-4.3.0_11 libogg-1.0_1,3 XFree86-clients-4.3.0_3 librep-0.16.2_2 XFree86-documents-4.3.0 librsvg2-2.4.0_1 XFree86-font100dpi-4.3.0 libtool-1.3.5_1 XFree86-font75dpi-4.3.0 libtool-1.4.3_2 XFree86-fontCyrillic-4.3.0 libungif-4.1.0b1_1 XFree86-fontDefaultBitmaps-4.3.0 libunicode-0.4_3 XFree86-fontEncodings-4.3.0 libutils-1.0.3_1 XFree86-fontScalable-4.3.0 libvorbis-1.0_1,3 XFree86-libraries-4.3.0_6 libwnck-2.4.0.1 Xaw3d-1.5 libxine-1.0.r2 Xft-2.1.2 libxml-1.8.17_1 aalib-1.4.r5_1 libxml2-2.6.2 amp-0.7.6 libxslt-1.1.0 amsn-0.83_1 libzvt-2.0.1_6 apache-1.3.29_1 linc-1.0.3 arts-1.1.4,1 linux-divx4linux-0.20011010.4.02 aspell-0.50.4.1 linux-divx4linux-5.0.20030428 atk-1.4.1_1 linux-divxplayer-0.2.0 autoconf-2.53_1 linux-edonkey-core-0.50.1,1 autoconf213-2.13.000227_5 linux-netscape-navigator-4.8 automake-1.5,1 linux_base-7.1_5 automake14-1.4.5_9 lynx-2.8.5d16_3 bison-1.75_1 m4-1.4_1 bonnie-2.0.6 mad-esound-0.14.2b_3 bsdpan-CGI.pm-2.74 metacity-2.6.3 bsdpan-MIME-Base64-2.12 metatheme2-0.9.7_1 bugbuddy2-2.4.1 mkcatalog-1.1 cdparanoia-3.9.8_5 mod_frontpage-1.6.2 cricket-1.0.4.p2 mod_php4-4.3.4,1 cssc-0.15a.0_1 mrtg-2.10.5_1,1 cups-base-1.1.19.0 mysql-client-3.23.58 cvsup-16.1h mysql-server-3.23.54 cvsup-without-gui-16.1h mysqltcl-2.14 cyrus-sasl-1.5.28_2 nap-1.5.2 db41-4.1.25_1 nasm-0.98.38,1 djbfft-0.76 nautilus2-2.4.1 docbook-sk-4.1.2_1 net-snmp-5.0.9_1 docbook-xml-4.2_1 netscape-remote-1.0_1 docbook-xsl-1.62.3 netscape-wrapper-2000.07.07 eel2-2.4.1 nl-ispell-1.0.0_2 eog2-2.4.1 open-motif-2.2.2_1 esound-0.2.32_1 openldap-client-2.1.22 expat-1.95.6_1 openquicktime-1.0 ezm3-1.1 openssl-0.9.7c fam-2.6.9_3 openwebmail-2.20 fbsd-icons-1.0 p5-Authen-PAM-0.14 fetchmail-6.2.5 p5-Authen-SASL-2.06 ffmpeg-0.4.8 p5-CGI-SpeedyCGI-2.22 flac-1.1.0_2 p5-CGI.pm-3.00,1 fontconfig-2.2.90_3 p5-Compress-Zlib-1.31 freetype2-2.1.5_1 p5-DBI-1.38 frontpage-5.0.2.2623_1 p5-Data-ShowTable-3.3 fxtv-1.03_1 p5-Digest-MD5-2.30 gail-1.4.1 p5-File-Spec-0.86 gconf-editor-2.4.0,1 p5-HTML-Parser-3.34 gconf2-2.4.0.1 p5-HTML-Tagset-3.03 gd-2.0.15_1,1 p5-IO-INET6-1.28 gdbm-1.8.3 p5-MIME-Base64-2.21 gdk-pixbuf-0.22.0 p5-Mysql-modules-1.2219 gdm2-2.4.4.5 p5-Net-1.17,1 gedit2-2.4.1 p5-Net-Daemon-0.37 gettext-0.12.1 p5-Net-SSLeay-1.23 glade2-2.0.1 p5-PlRPC-0.2016 gle-3.0.3 p5-SNMP_Session-0.98 glib-1.2.10_10 p5-Socket6-0.10 glib-2.2.3 p5-Storable-2.08 gmake-3.80_1 p5-Test-Harness-2.30 gnome-icon-theme-1.0.9 p5-Test-Simple-0.47_1 gnomedesktop-2.4.1.1_1 p5-Text-Iconv-1.2_1 gnomehier-1.0_10 p5-Time-HiRes-1.51,1 gnomelibs-1.4.2_1 p5-TimeDate-1.16,1 gnomemimedata-2.4.0 p5-URI-1.27 gnomevfs2-2.4.1_1 p5-XML-Parser-2.34 gtk-1.2.10_10 p5-libwww-5.70 gtk-2.2.4_1 pango-1.2.5 gtk-engines2-2.2.0 pcre-4.4 gtksourceview-0.7.0 perl-5.6.1_14 guile-1.6.4_2 php4-4.3.4 help2man-1.29 phpSysInfo-2.1 imake-4.3.0_1 pilot-link-0.11.7_2 imlib-1.9.14_1 pkgconfig-0.15.0 intltool-0.27.2 pkgdb.db isc-dhcp3-3.0.1.r12 png-1.2.5_2 ispell-3.2.06_3 popt-1.6.4_1 jpeg-6b_1 portupgrade-20030723 juke-0.7 pptpclient-1.3.1 kde-3.1.4 procmail-3.22_3 kdeaddons-3.1.4 py23-expat-2.3.2_2 kdeadmin-3.1.4 python-2.3.2_2 kdeartwork-3.1.4_1 qpopper-4.0.5_1 kdebase-3.1.4 qt-3.2.1 kdeedu-3.1.4 quanta-3.1.4,2 kdegames-3.1.4 rawio-1.2 kdegraphics-3.1.4 rc_subr-1.16 kdelibs-3.1.4_1 rep-gtk2-gnome-0.17_2,1 kdemultimedia-3.1.4 rpm-3.0.6_8 kdenetwork-3.1.4 rrdtool-1.0.45 kdepim-3.1.4 ruby-1.6.8.2003.10.15 kdesdk-3.1.4 ruby-bdb1-0.2.1 kdetoys-3.1.4 ruby-rdoc-0.9.0 kdeutils-3.1.4 ruby-shim-ruby18-1.8.1.p2 kdevelop-2.1.5 samba-2.2.8a koffice-1.2.1_1,1 samba-libsmbclient-3.0.0 lame-3.93.1 sawfish2-1.3_4,2 lcms-1.09,1 scrollkeeper-0.3.12_4,1 libIDL-0.8.2 sdl-1.2.5_3 liba52-0.7.4 sdocbook-xml-4.1.2.5_1 libart_lgpl2-2.3.16 sendmail-8.11.7_1 libaudiofile-0.2.4 sendmail-8.12.10 libbonobo-2.4.2 smtpd-2.0_2 libbonoboui-2.4.1 sox-12.17.4 libcapplet-1.4.0.5_1 speex-1.0.2,1 libdivxdecore-0.4.7 startup-notification-0.5_1 libdivxdecore-devel-0.4.0.50_1 svgalib-1.4.3_1 libdv-0.9.9 tcl-8.2.3_3 libdvdcss-1.2.8 tcl-8.3.5_2 libdvdnav-0.1.3 tcl-8.4.4_1,1 libdvdread-0.9.4 tcllib-1.3 libgda2-1.0.1_2 tiff-3.6.0 libglade2-2.0.1_1 tightvnc-1.2.9 libglut-5.0.2 tk-8.3.5_2 libgmp-2001.08.07 tk-8.4.4,1 libgnome-2.4.0_1 unzip-5.50_2 libgnomecanvas-2.4.0 uulib-0.5.18 libgnomedb-1.0.1 webalizer-2.1.10_4 libgnomeprint-2.4.0_1 win32-codecs-2.0.90,1 libgnomeprintui-2.4.0 wrapper-1.0_3 libgnomeui-2.4.0.1_1 xanim-2.92.0 libgnugetopt-1.2 xlupe-1.1 libgsf-1.8.2 xmbmon-203 libgtkeditor-0.1.8 xmlcatmgr-1.1 libgtkhtml-2.4.1_1 xmms-esound-1.2.8_1 libgtop2-2.0.7_1 xscreensaver-gnome-4.13 libiconv-1.9.1_3 xvid-0.9.2,1 libltdl-1.5 yelp-2.4.1 libmcrypt-2.5.7_1 http://www.zaleo.homeunix.net/ --=====================_52938843==_ Content-Type: application/octet-stream; name="config.log" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="config.log" VGhpcyBmaWxlIGNvbnRhaW5zIGFueSBtZXNzYWdlcyBwcm9kdWNlZCBieSBjb21waWxlcnMgd2hp bGUKcnVubmluZyBjb25maWd1cmUsIHRvIGFpZCBkZWJ1Z2dpbmcgaWYgY29uZmlndXJlIG1ha2Vz IGEgbWlzdGFrZS4KCkl0IHdhcyBjcmVhdGVkIGJ5IGNvbmZpZ3VyZSwgd2hpY2ggd2FzCmdlbmVy YXRlZCBieSBHTlUgQXV0b2NvbmYgMi41Ny4gIEludm9jYXRpb24gY29tbWFuZCBsaW5lIHdhcwoK ICAkIC4vY29uZmlndXJlIC0tcHJvZ3JhbS10cmFuc2Zvcm0tbmFtZT0gLS14LWxpYnJhcmllcz0v dXNyL1gxMVI2L2xpYiAtLXgtaW5jbHVkZXM9L3Vzci9YMTFSNi9pbmNsdWRlIC0tcHJlZml4PS91 c3IvWDExUjYgaTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEKCiMjIC0tLS0tLS0tLSAjIwojIyBQbGF0 Zm9ybS4gIyMKIyMgLS0tLS0tLS0tICMjCgpob3N0bmFtZSA9IHNlcnZlci56YWxlby5ob21ldW5p eC5uZXQKdW5hbWUgLW0gPSBpMzg2CnVuYW1lIC1yID0gNS4xLVJFTEVBU0UtcDEwCnVuYW1lIC1z ID0gRnJlZUJTRAp1bmFtZSAtdiA9IEZyZWVCU0QgNS4xLVJFTEVBU0UtcDEwICM4OiBTYXQgTm92 IDE1IDE3OjEyOjQ1IENFVCAyMDAzICAgICB6ZW9Ac2VydmVyLnphbGVvLmhvbWV1bml4Lm5ldDov dXNyL3NyYy9zeXMvaTM4Ni9jb21waWxlL1pBTEVPIAoKL3Vzci9iaW4vdW5hbWUgLXAgPSBpMzg2 Ci9iaW4vdW5hbWUgLVggICAgID0gdW5rbm93bgoKL2Jpbi9hcmNoICAgICAgICAgICAgICA9IHVu a25vd24KL3Vzci9iaW4vYXJjaCAtayAgICAgICA9IHVua25vd24KL3Vzci9jb252ZXgvZ2V0c3lz aW5mbyA9IHVua25vd24KaG9zdGluZm8gICAgICAgICAgICAgICA9IHVua25vd24KL2Jpbi9tYWNo aW5lICAgICAgICAgICA9IHVua25vd24KL3Vzci9iaW4vb3NsZXZlbCAgICAgICA9IHVua25vd24K L2Jpbi91bml2ZXJzZSAgICAgICAgICA9IHVua25vd24KClBBVEg6IC9zYmluClBBVEg6IC9iaW4K UEFUSDogL3Vzci9zYmluClBBVEg6IC91c3IvYmluClBBVEg6IC91c3IvZ2FtZXMKUEFUSDogL3Vz ci9sb2NhbC9zYmluClBBVEg6IC91c3IvbG9jYWwvYmluClBBVEg6IC91c3IvWDExUjYvYmluClBB VEg6IC9ob21lL3plby9iaW4KUEFUSDogL3Vzci9sb2NhbC9iaW4KCgojIyAtLS0tLS0tLS0tLSAj IwojIyBDb3JlIHRlc3RzLiAjIwojIyAtLS0tLS0tLS0tLSAjIwoKY29uZmlndXJlOjE1MjI6IGNo ZWNraW5nIGJ1aWxkIHN5c3RlbSB0eXBlCmNvbmZpZ3VyZToxNTQwOiByZXN1bHQ6IGkzODYtcG9y dGJsZC1mcmVlYnNkNS4xCmNvbmZpZ3VyZToxNTQ4OiBjaGVja2luZyBob3N0IHN5c3RlbSB0eXBl CmNvbmZpZ3VyZToxNTYyOiByZXN1bHQ6IGkzODYtcG9ydGJsZC1mcmVlYnNkNS4xCmNvbmZpZ3Vy ZToxNTcwOiBjaGVja2luZyB0YXJnZXQgc3lzdGVtIHR5cGUKY29uZmlndXJlOjE1ODQ6IHJlc3Vs dDogaTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEKY29uZmlndXJlOjE2MTM6IGNoZWNraW5nIGZvciBh IEJTRC1jb21wYXRpYmxlIGluc3RhbGwKY29uZmlndXJlOjE2Njc6IHJlc3VsdDogL3Vzci9iaW4v aW5zdGFsbCAtYyAtbyByb290IC1nIHdoZWVsCmNvbmZpZ3VyZToxNjc4OiBjaGVja2luZyB3aGV0 aGVyIGJ1aWxkIGVudmlyb25tZW50IGlzIHNhbmUKY29uZmlndXJlOjE3MjE6IHJlc3VsdDogeWVz CmNvbmZpZ3VyZToxNzU0OiBjaGVja2luZyBmb3IgZ2F3awpjb25maWd1cmU6MTc4MzogcmVzdWx0 OiBubwpjb25maWd1cmU6MTc1NDogY2hlY2tpbmcgZm9yIG1hd2sKY29uZmlndXJlOjE3ODM6IHJl c3VsdDogbm8KY29uZmlndXJlOjE3NTQ6IGNoZWNraW5nIGZvciBuYXdrCmNvbmZpZ3VyZToxNzcw OiBmb3VuZCAvdXNyL2Jpbi9uYXdrCmNvbmZpZ3VyZToxNzgwOiByZXN1bHQ6IG5hd2sKY29uZmln dXJlOjE3OTA6IGNoZWNraW5nIHdoZXRoZXIgZ21ha2Ugc2V0cyAkKE1BS0UpCmNvbmZpZ3VyZTox ODEwOiByZXN1bHQ6IHllcwpjb25maWd1cmU6MTk5MzogY2hlY2tpbmcgZm9yIHN0eWxlIG9mIGlu Y2x1ZGUgdXNlZCBieSBnbWFrZQpjb25maWd1cmU6MjAyMTogcmVzdWx0OiBHTlUKY29uZmlndXJl OjIwNTQ6IGNoZWNraW5nIGZvciBpMzg2LXBvcnRibGQtZnJlZWJzZDUuMS1nY2MKY29uZmlndXJl OjIwODA6IHJlc3VsdDogY2MKY29uZmlndXJlOjIzNjI6IGNoZWNraW5nIGZvciBDIGNvbXBpbGVy IHZlcnNpb24KY29uZmlndXJlOjIzNjU6IGNjIC0tdmVyc2lvbiA8L2Rldi9udWxsID4mNQpjYyAo R0NDKSAzLjIuMiBbRnJlZUJTRF0gMjAwMzAyMDUgKHJlbGVhc2UpCkNvcHlyaWdodCAoQykgMjAw MiBGcmVlIFNvZnR3YXJlIEZvdW5kYXRpb24sIEluYy4KVGhpcyBpcyBmcmVlIHNvZnR3YXJlOyBz ZWUgdGhlIHNvdXJjZSBmb3IgY29weWluZyBjb25kaXRpb25zLiAgVGhlcmUgaXMgTk8Kd2FycmFu dHk7IG5vdCBldmVuIGZvciBNRVJDSEFOVEFCSUxJVFkgb3IgRklUTkVTUyBGT1IgQSBQQVJUSUNV TEFSIFBVUlBPU0UuCgpjb25maWd1cmU6MjM2ODogJD8gPSAwCmNvbmZpZ3VyZToyMzcwOiBjYyAt diA8L2Rldi9udWxsID4mNQpVc2luZyBidWlsdC1pbiBzcGVjcy4KQ29uZmlndXJlZCB3aXRoOiBG cmVlQlNEL2kzODYgc3lzdGVtIGNvbXBpbGVyClRocmVhZCBtb2RlbDogcG9zaXgKZ2NjIHZlcnNp b24gMy4yLjIgW0ZyZWVCU0RdIDIwMDMwMjA1IChyZWxlYXNlKQpjb25maWd1cmU6MjM3MzogJD8g PSAwCmNvbmZpZ3VyZToyMzc1OiBjYyAtViA8L2Rldi9udWxsID4mNQpjYzogYXJndW1lbnQgdG8g YC1WJyBpcyBtaXNzaW5nCmNvbmZpZ3VyZToyMzc4OiAkPyA9IDEKY29uZmlndXJlOjI0MDI6IGNo ZWNraW5nIGZvciBDIGNvbXBpbGVyIGRlZmF1bHQgb3V0cHV0CmNvbmZpZ3VyZToyNDA1OiBjYyAt TyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2Nh bC9saWIgY29uZnRlc3QuYyAgPiY1CmNvbmZpZ3VyZToyNDA4OiAkPyA9IDAKY29uZmlndXJlOjI0 NTQ6IHJlc3VsdDogYS5vdXQKY29uZmlndXJlOjI0NTk6IGNoZWNraW5nIHdoZXRoZXIgdGhlIEMg Y29tcGlsZXIgd29ya3MKY29uZmlndXJlOjI0NjU6IC4vYS5vdXQKY29uZmlndXJlOjI0Njg6ICQ/ ID0gMApjb25maWd1cmU6MjQ4NTogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjI0OTI6IGNoZWNraW5n IHdoZXRoZXIgd2UgYXJlIGNyb3NzIGNvbXBpbGluZwpjb25maWd1cmU6MjQ5NDogcmVzdWx0OiBu bwpjb25maWd1cmU6MjQ5NzogY2hlY2tpbmcgZm9yIHN1ZmZpeCBvZiBleGVjdXRhYmxlcwpjb25m aWd1cmU6MjQ5OTogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91 c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQpjb25maWd1 cmU6MjUwMjogJD8gPSAwCmNvbmZpZ3VyZToyNTI3OiByZXN1bHQ6IApjb25maWd1cmU6MjUzMzog Y2hlY2tpbmcgZm9yIHN1ZmZpeCBvZiBvYmplY3QgZmlsZXMKY29uZmlndXJlOjI1NTU6IGNjIC1j IC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3Qu YyA+JjUKY29uZmlndXJlOjI1NTg6ICQ/ID0gMApjb25maWd1cmU6MjU4MDogcmVzdWx0OiBvCmNv bmZpZ3VyZToyNTg0OiBjaGVja2luZyB3aGV0aGVyIHdlIGFyZSB1c2luZyB0aGUgR05VIEMgY29t cGlsZXIKY29uZmlndXJlOjI2MDk6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkv dXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjI2MTI6ICQ/ID0gMApj b25maWd1cmU6MjYxNTogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZToyNjE4OiAkPyA9IDAK Y29uZmlndXJlOjI2MzE6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToyNjM3OiBjaGVja2luZyB3aGV0 aGVyIGNjIGFjY2VwdHMgLWcKY29uZmlndXJlOjI2NTk6IGNjIC1jIC1nIC1JL3Vzci9sb2NhbC9p bmNsdWRlIGNvbmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZToyNjYyOiAkPyA9IDAKY29uZmlndXJlOjI2 NjU6IHRlc3QgLXMgY29uZnRlc3Qubwpjb25maWd1cmU6MjY2ODogJD8gPSAwCmNvbmZpZ3VyZToy Njc5OiByZXN1bHQ6IHllcwpjb25maWd1cmU6MjY5NjogY2hlY2tpbmcgZm9yIGNjIG9wdGlvbiB0 byBhY2NlcHQgQU5TSSBDCmNvbmZpZ3VyZToyNzU3OiBjYyAgLWMgLU8gLXBpcGUgLW1jcHU9cGVu dGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jID4mNQpjb25maWd1cmU6Mjc2 MDogJD8gPSAwCmNvbmZpZ3VyZToyNzYzOiB0ZXN0IC1zIGNvbmZ0ZXN0Lm8KY29uZmlndXJlOjI3 NjY6ICQ/ID0gMApjb25maWd1cmU6Mjc4NDogcmVzdWx0OiBub25lIG5lZWRlZApjb25maWd1cmU6 MjgwMjogY2MgLWMgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVk ZSBjb25mdGVzdC5jID4mNQpjb25mdGVzdC5jOjI6IHN5bnRheCBlcnJvciBiZWZvcmUgIm1lIgpj b25maWd1cmU6MjgwNTogJD8gPSAxCmNvbmZpZ3VyZTogZmFpbGVkIHByb2dyYW0gd2FzOgp8ICNp Zm5kZWYgX19jcGx1c3BsdXMKfCAgIGNob2tlIG1lCnwgI2VuZGlmCmNvbmZpZ3VyZToyOTE2OiBj aGVja2luZyBkZXBlbmRlbmN5IHN0eWxlIG9mIGNjCmNvbmZpZ3VyZToyOTc4OiByZXN1bHQ6IGdj YzMKY29uZmlndXJlOjI5ODU6IGNoZWNraW5nIGZvciBzdHJlcnJvciBpbiAtbGNwb3NpeApjb25m aWd1cmU6MzAxNjogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91 c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgLWxjcG9zaXggICA+ JjUKL3Vzci9iaW4vbGQ6IGNhbm5vdCBmaW5kIC1sY3Bvc2l4CmNvbmZpZ3VyZTozMDE5OiAkPyA9 IDEKY29uZmlndXJlOiBmYWlsZWQgcHJvZ3JhbSB3YXM6CnwgI2xpbmUgMjk5MyAiY29uZmlndXJl Igp8IC8qIGNvbmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FHRV9OQU1FICIiCnwgI2Rl ZmluZSBQQUNLQUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVkVSU0lPTiAiIgp8ICNk ZWZpbmUgUEFDS0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfQlVHUkVQT1JUICIiCnwg I2RlZmluZSBQQUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lPTiAiMC45LjIyIgp8IC8q IGVuZCBjb25mZGVmcy5oLiAgKi8KfCAKfCAvKiBPdmVycmlkZSBhbnkgZ2NjMiBpbnRlcm5hbCBw cm90b3R5cGUgdG8gYXZvaWQgYW4gZXJyb3IuICAqLwp8ICNpZmRlZiBfX2NwbHVzcGx1cwp8IGV4 dGVybiAiQyIKfCAjZW5kaWYKfCAvKiBXZSB1c2UgY2hhciBiZWNhdXNlIGludCBtaWdodCBtYXRj aCB0aGUgcmV0dXJuIHR5cGUgb2YgYSBnY2MyCnwgICAgYnVpbHRpbiBhbmQgdGhlbiBpdHMgYXJn dW1lbnQgcHJvdG90eXBlIHdvdWxkIHN0aWxsIGFwcGx5LiAgKi8KfCBjaGFyIHN0cmVycm9yICgp Owp8IGludAp8IG1haW4gKCkKfCB7Cnwgc3RyZXJyb3IgKCk7CnwgICA7CnwgICByZXR1cm4gMDsK fCB9CmNvbmZpZ3VyZTozMDM3OiByZXN1bHQ6IG5vCmNvbmZpZ3VyZTozMDU0OiBjaGVja2luZyBm b3IgaTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEtZ2NjCmNvbmZpZ3VyZTozMDgwOiByZXN1bHQ6IGNj CmNvbmZpZ3VyZTozMzYyOiBjaGVja2luZyBmb3IgQyBjb21waWxlciB2ZXJzaW9uCmNvbmZpZ3Vy ZTozMzY1OiBjYyAtLXZlcnNpb24gPC9kZXYvbnVsbCA+JjUKY2MgKEdDQykgMy4yLjIgW0ZyZWVC U0RdIDIwMDMwMjA1IChyZWxlYXNlKQpDb3B5cmlnaHQgKEMpIDIwMDIgRnJlZSBTb2Z0d2FyZSBG b3VuZGF0aW9uLCBJbmMuClRoaXMgaXMgZnJlZSBzb2Z0d2FyZTsgc2VlIHRoZSBzb3VyY2UgZm9y IGNvcHlpbmcgY29uZGl0aW9ucy4gIFRoZXJlIGlzIE5PCndhcnJhbnR5OyBub3QgZXZlbiBmb3Ig TUVSQ0hBTlRBQklMSVRZIG9yIEZJVE5FU1MgRk9SIEEgUEFSVElDVUxBUiBQVVJQT1NFLgoKY29u ZmlndXJlOjMzNjg6ICQ/ID0gMApjb25maWd1cmU6MzM3MDogY2MgLXYgPC9kZXYvbnVsbCA+JjUK VXNpbmcgYnVpbHQtaW4gc3BlY3MuCkNvbmZpZ3VyZWQgd2l0aDogRnJlZUJTRC9pMzg2IHN5c3Rl bSBjb21waWxlcgpUaHJlYWQgbW9kZWw6IHBvc2l4CmdjYyB2ZXJzaW9uIDMuMi4yIFtGcmVlQlNE XSAyMDAzMDIwNSAocmVsZWFzZSkKY29uZmlndXJlOjMzNzM6ICQ/ID0gMApjb25maWd1cmU6MzM3 NTogY2MgLVYgPC9kZXYvbnVsbCA+JjUKY2M6IGFyZ3VtZW50IHRvIGAtVicgaXMgbWlzc2luZwpj b25maWd1cmU6MzM3ODogJD8gPSAxCmNvbmZpZ3VyZTozMzgxOiBjaGVja2luZyB3aGV0aGVyIHdl IGFyZSB1c2luZyB0aGUgR05VIEMgY29tcGlsZXIKY29uZmlndXJlOjM0Mjg6IHJlc3VsdDogeWVz CmNvbmZpZ3VyZTozNDM0OiBjaGVja2luZyB3aGV0aGVyIGNjIGFjY2VwdHMgLWcKY29uZmlndXJl OjM0NzY6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTozNDkzOiBjaGVja2luZyBmb3IgY2Mgb3B0aW9u IHRvIGFjY2VwdCBBTlNJIEMKY29uZmlndXJlOjM1ODE6IHJlc3VsdDogbm9uZSBuZWVkZWQKY29u ZmlndXJlOjM1OTk6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2Fs L2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZnRlc3QuYzoyOiBzeW50YXggZXJyb3IgYmVmb3Jl ICJtZSIKY29uZmlndXJlOjM2MDI6ICQ/ID0gMQpjb25maWd1cmU6IGZhaWxlZCBwcm9ncmFtIHdh czoKfCAjaWZuZGVmIF9fY3BsdXNwbHVzCnwgICBjaG9rZSBtZQp8ICNlbmRpZgpjb25maWd1cmU6 MzcxMzogY2hlY2tpbmcgZGVwZW5kZW5jeSBzdHlsZSBvZiBjYwpjb25maWd1cmU6Mzc3NTogcmVz dWx0OiBnY2MzCmNvbmZpZ3VyZTozNzg1OiBjaGVja2luZyBob3cgdG8gcnVuIHRoZSBDIHByZXBy b2Nlc3Nvcgpjb25maWd1cmU6MzgyMTogY2MgLUUgLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRl c3QuYwpjb25maWd1cmU6MzgyNzogJD8gPSAwCmNvbmZpZ3VyZTozODU5OiBjYyAtRSAtSS91c3Iv bG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jCmNvbmZpZ3VyZTozODYxOjI4OiBhY19ub25leGlzdGVu dC5oOiBObyBzdWNoIGZpbGUgb3IgZGlyZWN0b3J5CmNvbmZpZ3VyZTozODY1OiAkPyA9IDEKY29u ZmlndXJlOiBmYWlsZWQgcHJvZ3JhbSB3YXM6CnwgI2xpbmUgMzg1MSAiY29uZmlndXJlIgp8IC8q IGNvbmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FHRV9OQU1FICIiCnwgI2RlZmluZSBQ QUNLQUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVkVSU0lPTiAiIgp8ICNkZWZpbmUg UEFDS0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfQlVHUkVQT1JUICIiCnwgI2RlZmlu ZSBQQUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lPTiAiMC45LjIyIgp8IC8qIGVuZCBj b25mZGVmcy5oLiAgKi8KfCAjaW5jbHVkZSA8YWNfbm9uZXhpc3RlbnQuaD4KY29uZmlndXJlOjM5 MDM6IHJlc3VsdDogY2MgLUUKY29uZmlndXJlOjM5Mjg6IGNjIC1FIC1JL3Vzci9sb2NhbC9pbmNs dWRlIGNvbmZ0ZXN0LmMKY29uZmlndXJlOjM5MzQ6ICQ/ID0gMApjb25maWd1cmU6Mzk2NjogY2Mg LUUgLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYwpjb25maWd1cmU6Mzk2ODoyODogYWNf bm9uZXhpc3RlbnQuaDogTm8gc3VjaCBmaWxlIG9yIGRpcmVjdG9yeQpjb25maWd1cmU6Mzk3Mjog JD8gPSAxCmNvbmZpZ3VyZTogZmFpbGVkIHByb2dyYW0gd2FzOgp8ICNsaW5lIDM5NTggImNvbmZp Z3VyZSIKfCAvKiBjb25mZGVmcy5oLiAgKi8KfCAKfCAjZGVmaW5lIFBBQ0tBR0VfTkFNRSAiIgp8 ICNkZWZpbmUgUEFDS0FHRV9UQVJOQU1FICIiCnwgI2RlZmluZSBQQUNLQUdFX1ZFUlNJT04gIiIK fCAjZGVmaW5lIFBBQ0tBR0VfU1RSSU5HICIiCnwgI2RlZmluZSBQQUNLQUdFX0JVR1JFUE9SVCAi Igp8ICNkZWZpbmUgUEFDS0FHRSAieGluZS11aSIKfCAjZGVmaW5lIFZFUlNJT04gIjAuOS4yMiIK fCAvKiBlbmQgY29uZmRlZnMuaC4gICovCnwgI2luY2x1ZGUgPGFjX25vbmV4aXN0ZW50Lmg+CmNv bmZpZ3VyZTo0MDE1OiBjaGVja2luZyBmb3IgZWdyZXAKY29uZmlndXJlOjQwMjU6IHJlc3VsdDog Z3JlcCAtRQpjb25maWd1cmU6NDAzMDogY2hlY2tpbmcgZm9yIEFOU0kgQyBoZWFkZXIgZmlsZXMK Y29uZmlndXJlOjQwNTY6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xv Y2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjQwNTk6ICQ/ID0gMApjb25maWd1 cmU6NDA2MjogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo0MDY1OiAkPyA9IDAKY29uZmln dXJlOjQxNTc6IGNjIC1vIGNvbmZ0ZXN0IC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNy L2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xvY2FsL2xpYiBjb25mdGVzdC5jICA+JjUKY29uZmlndXJl OjQxNjA6ICQ/ID0gMApjb25maWd1cmU6NDE2MjogLi9jb25mdGVzdApjb25maWd1cmU6NDE2NTog JD8gPSAwCmNvbmZpZ3VyZTo0MTgwOiByZXN1bHQ6IHllcwpjb25maWd1cmU6NDIwNDogY2hlY2tp bmcgZm9yIHN5cy90eXBlcy5oCmNvbmZpZ3VyZTo0MjIxOiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1w ZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZTo0 MjI0OiAkPyA9IDAKY29uZmlndXJlOjQyMjc6IHRlc3QgLXMgY29uZnRlc3Qubwpjb25maWd1cmU6 NDIzMDogJD8gPSAwCmNvbmZpZ3VyZTo0MjQxOiByZXN1bHQ6IHllcwpjb25maWd1cmU6NDIwNDog Y2hlY2tpbmcgZm9yIHN5cy9zdGF0LmgKY29uZmlndXJlOjQyMjE6IGNjIC1jIC1PIC1waXBlIC1t Y3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmln dXJlOjQyMjQ6ICQ/ID0gMApjb25maWd1cmU6NDIyNzogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZp Z3VyZTo0MjMwOiAkPyA9IDAKY29uZmlndXJlOjQyNDE6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo0 MjA0OiBjaGVja2luZyBmb3Igc3RkbGliLmgKY29uZmlndXJlOjQyMjE6IGNjIC1jIC1PIC1waXBl IC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29u ZmlndXJlOjQyMjQ6ICQ/ID0gMApjb25maWd1cmU6NDIyNzogdGVzdCAtcyBjb25mdGVzdC5vCmNv bmZpZ3VyZTo0MjMwOiAkPyA9IDAKY29uZmlndXJlOjQyNDE6IHJlc3VsdDogeWVzCmNvbmZpZ3Vy ZTo0MjA0OiBjaGVja2luZyBmb3Igc3RyaW5nLmgKY29uZmlndXJlOjQyMjE6IGNjIC1jIC1PIC1w aXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUK Y29uZmlndXJlOjQyMjQ6ICQ/ID0gMApjb25maWd1cmU6NDIyNzogdGVzdCAtcyBjb25mdGVzdC5v CmNvbmZpZ3VyZTo0MjMwOiAkPyA9IDAKY29uZmlndXJlOjQyNDE6IHJlc3VsdDogeWVzCmNvbmZp Z3VyZTo0MjA0OiBjaGVja2luZyBmb3IgbWVtb3J5LmgKY29uZmlndXJlOjQyMjE6IGNjIC1jIC1P IC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+ JjUKY29uZmlndXJlOjQyMjQ6ICQ/ID0gMApjb25maWd1cmU6NDIyNzogdGVzdCAtcyBjb25mdGVz dC5vCmNvbmZpZ3VyZTo0MjMwOiAkPyA9IDAKY29uZmlndXJlOjQyNDE6IHJlc3VsdDogeWVzCmNv bmZpZ3VyZTo0MjA0OiBjaGVja2luZyBmb3Igc3RyaW5ncy5oCmNvbmZpZ3VyZTo0MjIxOiBjYyAt YyAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0 LmMgPiY1CmNvbmZpZ3VyZTo0MjI0OiAkPyA9IDAKY29uZmlndXJlOjQyMjc6IHRlc3QgLXMgY29u ZnRlc3Qubwpjb25maWd1cmU6NDIzMDogJD8gPSAwCmNvbmZpZ3VyZTo0MjQxOiByZXN1bHQ6IHll cwpjb25maWd1cmU6NDIwNDogY2hlY2tpbmcgZm9yIGludHR5cGVzLmgKY29uZmlndXJlOjQyMjE6 IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29u ZnRlc3QuYyA+JjUKY29uZmlndXJlOjQyMjQ6ICQ/ID0gMApjb25maWd1cmU6NDIyNzogdGVzdCAt cyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo0MjMwOiAkPyA9IDAKY29uZmlndXJlOjQyNDE6IHJlc3Vs dDogeWVzCmNvbmZpZ3VyZTo0MjA0OiBjaGVja2luZyBmb3Igc3RkaW50LmgKY29uZmlndXJlOjQy MjE6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUg Y29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjQyMjQ6ICQ/ID0gMApjb25maWd1cmU6NDIyNzogdGVz dCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo0MjMwOiAkPyA9IDAKY29uZmlndXJlOjQyNDE6IHJl c3VsdDogeWVzCmNvbmZpZ3VyZTo0MjA0OiBjaGVja2luZyBmb3IgdW5pc3RkLmgKY29uZmlndXJl OjQyMjE6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1 ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjQyMjQ6ICQ/ID0gMApjb25maWd1cmU6NDIyNzog dGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo0MjMwOiAkPyA9IDAKY29uZmlndXJlOjQyNDE6 IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo0MjYzOiBjaGVja2luZyBtaW5peC9jb25maWcuaCB1c2Fi aWxpdHkKY29uZmlndXJlOjQyNzY6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkv dXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjQzMjA6MjY6IG1pbml4 L2NvbmZpZy5oOiBObyBzdWNoIGZpbGUgb3IgZGlyZWN0b3J5CmNvbmZpZ3VyZTo0Mjc5OiAkPyA9 IDEKY29uZmlndXJlOiBmYWlsZWQgcHJvZ3JhbSB3YXM6CnwgI2xpbmUgNDI2NiAiY29uZmlndXJl Igp8IC8qIGNvbmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FHRV9OQU1FICIiCnwgI2Rl ZmluZSBQQUNLQUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVkVSU0lPTiAiIgp8ICNk ZWZpbmUgUEFDS0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfQlVHUkVQT1JUICIiCnwg I2RlZmluZSBQQUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lPTiAiMC45LjIyIgp8ICNk ZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1RZUEVTX0ggMQp8ICNkZWZp bmUgSEFWRV9TWVNfU1RBVF9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNkZWZpbmUg SEFWRV9TVFJJTkdfSCAxCnwgI2RlZmluZSBIQVZFX01FTU9SWV9IIDEKfCAjZGVmaW5lIEhBVkVf U1RSSU5HU19IIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX1NU RElOVF9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8IC8qIGVuZCBjb25mZGVmcy5oLiAg Ki8KfCAjaW5jbHVkZSA8c3RkaW8uaD4KfCAjaWYgSEFWRV9TWVNfVFlQRVNfSAp8ICMgaW5jbHVk ZSA8c3lzL3R5cGVzLmg+CnwgI2VuZGlmCnwgI2lmIEhBVkVfU1lTX1NUQVRfSAp8ICMgaW5jbHVk ZSA8c3lzL3N0YXQuaD4KfCAjZW5kaWYKfCAjaWYgU1REQ19IRUFERVJTCnwgIyBpbmNsdWRlIDxz dGRsaWIuaD4KfCAjIGluY2x1ZGUgPHN0ZGRlZi5oPgp8ICNlbHNlCnwgIyBpZiBIQVZFX1NURExJ Ql9ICnwgIyAgaW5jbHVkZSA8c3RkbGliLmg+CnwgIyBlbmRpZgp8ICNlbmRpZgp8ICNpZiBIQVZF X1NUUklOR19ICnwgIyBpZiAhU1REQ19IRUFERVJTICYmIEhBVkVfTUVNT1JZX0gKfCAjICBpbmNs dWRlIDxtZW1vcnkuaD4KfCAjIGVuZGlmCnwgIyBpbmNsdWRlIDxzdHJpbmcuaD4KfCAjZW5kaWYK fCAjaWYgSEFWRV9TVFJJTkdTX0gKfCAjIGluY2x1ZGUgPHN0cmluZ3MuaD4KfCAjZW5kaWYKfCAj aWYgSEFWRV9JTlRUWVBFU19ICnwgIyBpbmNsdWRlIDxpbnR0eXBlcy5oPgp8ICNlbHNlCnwgIyBp ZiBIQVZFX1NURElOVF9ICnwgIyAgaW5jbHVkZSA8c3RkaW50Lmg+CnwgIyBlbmRpZgp8ICNlbmRp Zgp8ICNpZiBIQVZFX1VOSVNURF9ICnwgIyBpbmNsdWRlIDx1bmlzdGQuaD4KfCAjZW5kaWYKfCAj aW5jbHVkZSA8bWluaXgvY29uZmlnLmg+CmNvbmZpZ3VyZTo0Mjk1OiByZXN1bHQ6IG5vCmNvbmZp Z3VyZTo0Mjk5OiBjaGVja2luZyBtaW5peC9jb25maWcuaCBwcmVzZW5jZQpjb25maWd1cmU6NDMx MDogY2MgLUUgLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYwpjb25maWd1cmU6NDMyMjoy NjogbWluaXgvY29uZmlnLmg6IE5vIHN1Y2ggZmlsZSBvciBkaXJlY3RvcnkKY29uZmlndXJlOjQz MTY6ICQ/ID0gMQpjb25maWd1cmU6IGZhaWxlZCBwcm9ncmFtIHdhczoKfCAjbGluZSA0MzAyICJj b25maWd1cmUiCnwgLyogY29uZmRlZnMuaC4gICovCnwgCnwgI2RlZmluZSBQQUNLQUdFX05BTUUg IiIKfCAjZGVmaW5lIFBBQ0tBR0VfVEFSTkFNRSAiIgp8ICNkZWZpbmUgUEFDS0FHRV9WRVJTSU9O ICIiCnwgI2RlZmluZSBQQUNLQUdFX1NUUklORyAiIgp8ICNkZWZpbmUgUEFDS0FHRV9CVUdSRVBP UlQgIiIKfCAjZGVmaW5lIFBBQ0tBR0UgInhpbmUtdWkiCnwgI2RlZmluZSBWRVJTSU9OICIwLjku MjIiCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNkZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAx CnwgI2RlZmluZSBIQVZFX1NZU19TVEFUX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwg I2RlZmluZSBIQVZFX1NUUklOR19IIDEKfCAjZGVmaW5lIEhBVkVfTUVNT1JZX0ggMQp8ICNkZWZp bmUgSEFWRV9TVFJJTkdTX0ggMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5l IEhBVkVfU1RESU5UX0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgLyogZW5kIGNvbmZk ZWZzLmguICAqLwp8ICNpbmNsdWRlIDxtaW5peC9jb25maWcuaD4KY29uZmlndXJlOjQzMzU6IHJl c3VsdDogbm8KY29uZmlndXJlOjQzNzE6IGNoZWNraW5nIGZvciBtaW5peC9jb25maWcuaApjb25m aWd1cmU6NDM3ODogcmVzdWx0OiBubwpjb25maWd1cmU6NDQwNjogY2hlY2tpbmcgZm9yIEFOU0kg QyBoZWFkZXIgZmlsZXMKY29uZmlndXJlOjQ1NTY6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo0NTY2 OiBjaGVja2luZyB3aGV0aGVyIGdtYWtlIHNldHMgJChNQUtFKQpjb25maWd1cmU6NDU4NjogcmVz dWx0OiB5ZXMKY29uZmlndXJlOjQ2MDc6IGNoZWNraW5nIGZvciBhIEJTRC1jb21wYXRpYmxlIGlu c3RhbGwKY29uZmlndXJlOjQ2NjE6IHJlc3VsdDogL3Vzci9iaW4vaW5zdGFsbCAtYyAtbyByb290 IC1nIHdoZWVsCmNvbmZpZ3VyZTo0NjcyOiBjaGVja2luZyB3aGV0aGVyIGxuIC1zIHdvcmtzCmNv bmZpZ3VyZTo0Njc2OiByZXN1bHQ6IHllcwpjb25maWd1cmU6NDc3MzogY2hlY2tpbmcgZm9yIGxk IHVzZWQgYnkgR0NDCmNvbmZpZ3VyZTo0ODM2OiByZXN1bHQ6IC91c3IvYmluL2xkCmNvbmZpZ3Vy ZTo0ODQ1OiBjaGVja2luZyBpZiB0aGUgbGlua2VyICgvdXNyL2Jpbi9sZCkgaXMgR05VIGxkCkdO VSBsZCB2ZXJzaW9uIDIuMTMuMiBbRnJlZUJTRF0gMjAwMi0xMS0yNwpjb25maWd1cmU6NDg1Nzog cmVzdWx0OiB5ZXMKY29uZmlndXJlOjQ4NjI6IGNoZWNraW5nIGZvciAvdXNyL2Jpbi9sZCBvcHRp b24gdG8gcmVsb2FkIG9iamVjdCBmaWxlcwpjb25maWd1cmU6NDg2OTogcmVzdWx0OiAtcgpjb25m aWd1cmU6NDg3NDogY2hlY2tpbmcgZm9yIEJTRC1jb21wYXRpYmxlIG5tCmNvbmZpZ3VyZTo0OTEw OiByZXN1bHQ6IG5tCmNvbmZpZ3VyZTo0OTEzOiBjaGVja2luZyBmb3IgYSBzZWQgdGhhdCBkb2Vz IG5vdCB0cnVuY2F0ZSBvdXRwdXQKY29uZmlndXJlOjQ5OTU6IHJlc3VsdDogL3Vzci9iaW4vc2Vk CmNvbmZpZ3VyZTo0OTk4OiBjaGVja2luZyBob3cgdG8gcmVjb2duaXNlIGRlcGVuZGVudCBsaWJy YXJpZXMKY29uZmlndXJlOjUxNzk6IHJlc3VsdDogcGFzc19hbGwKY29uZmlndXJlOjUxOTE6IGNo ZWNraW5nIGNvbW1hbmQgdG8gcGFyc2Ugbm0gb3V0cHV0CmNvbmZpZ3VyZTo1Mjc1OiBjYyAtYyAt TyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMg PiY1CmNvbmZpZ3VyZTo1Mjc4OiAkPyA9IDAKY29uZmlndXJlOjUyODI6IG5tIGNvbmZ0ZXN0Lm8g XHwgc2VkIC1uIC1lICdzL14uKlsgCV1cKFtBQkNER0lTVFddW0FCQ0RHSVNUV10qXClbIAldWyAJ XSpcKFwpXChbX0EtWmEtel1bX0EtWmEtejAtOV0qXCkkL1wxIFwyXDMgXDMvcCcgXD4gY29uZnRl c3Qubm0KY29uZmlndXJlOjUyODU6ICQ/ID0gMApjb25maWd1cmU6NTMzNzogY2MgLW8gY29uZnRl c3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3Iv bG9jYWwvbGliIGNvbmZ0ZXN0LmMgY29uZnRzdG0ubyA+JjUKY29uZmlndXJlOjUzNDA6ICQ/ID0g MApjb25maWd1cmU6NTM4NDogcmVzdWx0OiBvawpjb25maWd1cmU6NTQwMjogY2hlY2tpbmcgZGxm Y24uaCB1c2FiaWxpdHkKY29uZmlndXJlOjU0MTU6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRp dW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjU0MTg6 ICQ/ID0gMApjb25maWd1cmU6NTQyMTogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo1NDI0 OiAkPyA9IDAKY29uZmlndXJlOjU0MzQ6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo1NDM4OiBjaGVj a2luZyBkbGZjbi5oIHByZXNlbmNlCmNvbmZpZ3VyZTo1NDQ5OiBjYyAtRSAtSS91c3IvbG9jYWwv aW5jbHVkZSBjb25mdGVzdC5jCmNvbmZpZ3VyZTo1NDU1OiAkPyA9IDAKY29uZmlndXJlOjU0NzQ6 IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo1NTEwOiBjaGVja2luZyBmb3IgZGxmY24uaApjb25maWd1 cmU6NTUxNzogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjU2Nzc6IGNoZWNraW5nIGZvciBpMzg2LXBv cnRibGQtZnJlZWJzZDUuMS1yYW5saWIKY29uZmlndXJlOjU3MDY6IHJlc3VsdDogbm8KY29uZmln dXJlOjU3MTU6IGNoZWNraW5nIGZvciByYW5saWIKY29uZmlndXJlOjU3MzE6IGZvdW5kIC91c3Iv YmluL3JhbmxpYgpjb25maWd1cmU6NTc0MjogcmVzdWx0OiByYW5saWIKY29uZmlndXJlOjU3NTc6 IGNoZWNraW5nIGZvciBpMzg2LXBvcnRibGQtZnJlZWJzZDUuMS1zdHJpcApjb25maWd1cmU6NTc4 NjogcmVzdWx0OiBubwpjb25maWd1cmU6NTc5NTogY2hlY2tpbmcgZm9yIHN0cmlwCmNvbmZpZ3Vy ZTo1ODExOiBmb3VuZCAvdXNyL2Jpbi9zdHJpcApjb25maWd1cmU6NTgyMjogcmVzdWx0OiBzdHJp cApjb25maWd1cmU6NjAzMjogY2hlY2tpbmcgZm9yIG9iamRpcgpjb25maWd1cmU6NjA0MzogcmVz dWx0OiAubGlicwpjb25maWd1cmU6NjA2MDogY2hlY2tpbmcgZm9yIGNjIG9wdGlvbiB0byBwcm9k dWNlIFBJQwpjb25maWd1cmU6NjIwNjogcmVzdWx0OiAtZlBJQwpjb25maWd1cmU6NjIxMDogY2hl Y2tpbmcgaWYgY2MgUElDIGZsYWcgLWZQSUMgd29ya3MKY29uZmlndXJlOjYyMzQ6IGNjIC1jIC1P IC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLWZQSUMgLURQSUMgLUkvdXNyL2xvY2FsL2luY2x1ZGUg Y29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjYyMzc6ICQ/ID0gMApjb25maWd1cmU6NjI0MDogdGVz dCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo2MjQzOiAkPyA9IDAKY29uZmlndXJlOjYyODE6IHJl c3VsdDogeWVzCmNvbmZpZ3VyZTo2Mjk3OiBjaGVja2luZyBpZiBjYyBzdGF0aWMgZmxhZyAtc3Rh dGljIHdvcmtzCmNvbmZpZ3VyZTo2MzIyOiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNwdT1w ZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgLXN0YXRpYyBj b25mdGVzdC5jICA+JjUKY29uZmlndXJlOjYzMjU6ICQ/ID0gMApjb25maWd1cmU6NjMyODogdGVz dCAtcyBjb25mdGVzdApjb25maWd1cmU6NjMzMTogJD8gPSAwCmNvbmZpZ3VyZTo2MzQ3OiByZXN1 bHQ6IHllcwpjb25maWd1cmU6NjM1OTogY2hlY2tpbmcgaWYgY2Mgc3VwcG9ydHMgLWMgLW8gZmls ZS5vCmNvbmZpZ3VyZTo2Mzc5OiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1vIG91 dC9jb25mdGVzdDIubyAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jID4mNQpjb25maWd1 cmU6NjQwMzogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjY0MDg6IGNoZWNraW5nIGlmIGNjIHN1cHBv cnRzIC1jIC1vIGZpbGUubG8KY29uZmlndXJlOjY0MzY6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBl bnRpdW1wcm8gLWMgLW8gY29uZnRlc3QubG8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3Qu YyA+JjUKY29uZmlndXJlOjY0Mzk6ICQ/ID0gMApjb25maWd1cmU6NjQ0MjogdGVzdCAtcyBjb25m dGVzdC5sbwpjb25maWd1cmU6NjQ0NTogJD8gPSAwCmNvbmZpZ3VyZTo2NDY3OiByZXN1bHQ6IHll cwpjb25maWd1cmU6NjQ5ODogY2hlY2tpbmcgaWYgY2Mgc3VwcG9ydHMgLWZuby1ydHRpIC1mbm8t ZXhjZXB0aW9ucwpjb25maWd1cmU6NjUyMTogY2MgLWMgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBy byAtZm5vLXJ0dGkgLWZuby1leGNlcHRpb25zIC1jIGNvbmZ0ZXN0LmMgLUkvdXNyL2xvY2FsL2lu Y2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjY1MjQ6ICQ/ID0gMApjb25maWd1cmU6NjUy NzogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo2NTMwOiAkPyA9IDAKY29uZmlndXJlOjY1 NDc6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo2NTU4OiBjaGVja2luZyB3aGV0aGVyIHRoZSBsaW5r ZXIgKC91c3IvYmluL2xkKSBzdXBwb3J0cyBzaGFyZWQgbGlicmFyaWVzCmNvbmZpZ3VyZTo3MjUz OiByZXN1bHQ6IHllcwpjb25maWd1cmU6NzI1ODogY2hlY2tpbmcgaG93IHRvIGhhcmRjb2RlIGxp YnJhcnkgcGF0aHMgaW50byBwcm9ncmFtcwpjb25maWd1cmU6NzI4MjogcmVzdWx0OiBpbW1lZGlh dGUKY29uZmlndXJlOjcyODc6IGNoZWNraW5nIHdoZXRoZXIgc3RyaXBwaW5nIGxpYnJhcmllcyBp cyBwb3NzaWJsZQpjb25maWd1cmU6NzI5MjogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjczMDM6IGNo ZWNraW5nIGR5bmFtaWMgbGlua2VyIGNoYXJhY3RlcmlzdGljcwpjb25maWd1cmU6NzcyMzogcmVz dWx0OiBmcmVlYnNkNS4xIGxkLnNvCmNvbmZpZ3VyZTo3NzI4OiBjaGVja2luZyBpZiBsaWJ0b29s IHN1cHBvcnRzIHNoYXJlZCBsaWJyYXJpZXMKY29uZmlndXJlOjc3MzA6IHJlc3VsdDogeWVzCmNv bmZpZ3VyZTo3NzMzOiBjaGVja2luZyB3aGV0aGVyIHRvIGJ1aWxkIHNoYXJlZCBsaWJyYXJpZXMK Y29uZmlndXJlOjc3NTQ6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo3NzU3OiBjaGVja2luZyB3aGV0 aGVyIHRvIGJ1aWxkIHN0YXRpYyBsaWJyYXJpZXMKY29uZmlndXJlOjc3NjE6IHJlc3VsdDogbm8K Y29uZmlndXJlOjg0MzU6IGNoZWNraW5nIHdoZXRoZXIgLWxjIHNob3VsZCBiZSBleHBsaWNpdGx5 IGxpbmtlZCBpbgpjb25maWd1cmU6ODQ0MzogY2MgLWMgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBy byAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jID4mNQpjb25maWd1cmU6ODQ0NjogJD8g PSAwCmNvbmZpZ3VyZTo4NDYwOiBjYyAtc2hhcmVkIGNvbmZ0ZXN0Lm8gIC12IC1XbCwtc29uYW1l IC1XbCxjb25mdGVzdCAtbyBjb25mdGVzdCAyXD5cJjEgXHwgZ3JlcCAgLWxjICBcPi9kZXYvbnVs bCAyXD5cJjEKY29uZmlndXJlOjg0NjM6ICQ/ID0gMQpjb25maWd1cmU6ODQ3NjogcmVzdWx0OiB5 ZXMKY29uZmlndXJlOjkwNzk6IGNoZWNraW5nIGZvciBtc2dmbXQKY29uZmlndXJlOjkxMDc6IHJl c3VsdDogL3Vzci9sb2NhbC9iaW4vbXNnZm10CmNvbmZpZ3VyZTo5MTE2OiBjaGVja2luZyBmb3Ig Z21zZ2ZtdApjb25maWd1cmU6OTE0NzogcmVzdWx0OiAvdXNyL2xvY2FsL2Jpbi9tc2dmbXQKY29u ZmlndXJlOjkxNTc6IGNoZWNraW5nIGZvciB4Z2V0dGV4dApjb25maWd1cmU6OTE4NTogcmVzdWx0 OiAvdXNyL2xvY2FsL2Jpbi94Z2V0dGV4dApjb25maWd1cmU6OTE5NjogY2hlY2tpbmcgZm9yIG1z Z21lcmdlCmNvbmZpZ3VyZTo5MjIzOiByZXN1bHQ6IC91c3IvbG9jYWwvYmluL21zZ21lcmdlCmNv bmZpZ3VyZTo5Mjk5OiBjaGVja2luZyBmb3IgcmFubGliCmNvbmZpZ3VyZTo5MzI2OiByZXN1bHQ6 IHJhbmxpYgpjb25maWd1cmU6OTMzODogY2hlY2tpbmcgZm9yIGFuIEFOU0kgQy1jb25mb3JtaW5n IGNvbnN0CmNvbmZpZ3VyZTo5NDA2OiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1J L3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZTo5NDA5OiAkPyA9IDAK Y29uZmlndXJlOjk0MTI6IHRlc3QgLXMgY29uZnRlc3Qubwpjb25maWd1cmU6OTQxNTogJD8gPSAw CmNvbmZpZ3VyZTo5NDI2OiByZXN1bHQ6IHllcwpjb25maWd1cmU6OTQzNjogY2hlY2tpbmcgZm9y IGlubGluZQpjb25maWd1cmU6OTQ1ODogY2MgLWMgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAt SS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jID4mNQpjb25maWd1cmU6OTQ2MTogJD8gPSAw CmNvbmZpZ3VyZTo5NDY0OiB0ZXN0IC1zIGNvbmZ0ZXN0Lm8KY29uZmlndXJlOjk0Njc6ICQ/ID0g MApjb25maWd1cmU6OTQ3OTogcmVzdWx0OiBpbmxpbmUKY29uZmlndXJlOjk0OTQ6IGNoZWNraW5n IGZvciBvZmZfdApjb25maWd1cmU6OTUxOTogY2MgLWMgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBy byAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jID4mNQpjb25maWd1cmU6OTUyMjogJD8g PSAwCmNvbmZpZ3VyZTo5NTI1OiB0ZXN0IC1zIGNvbmZ0ZXN0Lm8KY29uZmlndXJlOjk1Mjg6ICQ/ ID0gMApjb25maWd1cmU6OTUzOTogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjk1NTE6IGNoZWNraW5n IGZvciBzaXplX3QKY29uZmlndXJlOjk1NzY6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1w cm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjk1Nzk6ICQ/ ID0gMApjb25maWd1cmU6OTU4MjogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZTo5NTg1OiAk PyA9IDAKY29uZmlndXJlOjk1OTY6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZTo5NjEwOiBjaGVja2lu ZyBmb3Igd29ya2luZyBhbGxvY2EuaApjb25maWd1cmU6OTYzMjogY2MgLW8gY29uZnRlc3QgLU8g LXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwv bGliIGNvbmZ0ZXN0LmMgID4mNQpjb25maWd1cmU6OTYzODoyMDogYWxsb2NhLmg6IE5vIHN1Y2gg ZmlsZSBvciBkaXJlY3RvcnkKY29uZmlndXJlOjk2MzU6ICQ/ID0gMQpjb25maWd1cmU6IGZhaWxl ZCBwcm9ncmFtIHdhczoKfCAjbGluZSA5NjE2ICJjb25maWd1cmUiCnwgLyogY29uZmRlZnMuaC4g ICovCnwgCnwgI2RlZmluZSBQQUNLQUdFX05BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVEFSTkFN RSAiIgp8ICNkZWZpbmUgUEFDS0FHRV9WRVJTSU9OICIiCnwgI2RlZmluZSBQQUNLQUdFX1NUUklO RyAiIgp8ICNkZWZpbmUgUEFDS0FHRV9CVUdSRVBPUlQgIiIKfCAjZGVmaW5lIFBBQ0tBR0UgInhp bmUtdWkiCnwgI2RlZmluZSBWRVJTSU9OICIwLjkuMjIiCnwgI2RlZmluZSBTVERDX0hFQURFUlMg MQp8ICNkZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX1NZU19TVEFUX0gg MQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR19IIDEKfCAj ZGVmaW5lIEhBVkVfTUVNT1JZX0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJTkdTX0ggMQp8ICNkZWZp bmUgSEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1RESU5UX0ggMQp8ICNkZWZpbmUg SEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNkZWZpbmUgSEFWRV9E TEZDTl9IIDEKfCAvKiBlbmQgY29uZmRlZnMuaC4gICovCnwgI2luY2x1ZGUgPGFsbG9jYS5oPgp8 IGludAp8IG1haW4gKCkKfCB7CnwgY2hhciAqcCA9IChjaGFyICopIGFsbG9jYSAoMiAqIHNpemVv ZiAoaW50KSk7CnwgICA7CnwgICByZXR1cm4gMDsKfCB9CmNvbmZpZ3VyZTo5NjUyOiByZXN1bHQ6 IG5vCmNvbmZpZ3VyZTo5NjYyOiBjaGVja2luZyBmb3IgYWxsb2NhCmNvbmZpZ3VyZTo5NzA0OiBj YyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNs dWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1CmNvbmZpZ3VyZTo5NzA3OiAkPyA9 IDAKY29uZmlndXJlOjk3MTA6IHRlc3QgLXMgY29uZnRlc3QKY29uZmlndXJlOjk3MTM6ICQ/ID0g MApjb25maWd1cmU6OTcyNDogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjk5Mzc6IGNoZWNraW5nIGZv ciBzdGRsaWIuaApjb25maWd1cmU6OTk0MjogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjk5Mzc6IGNo ZWNraW5nIGZvciB1bmlzdGQuaApjb25maWd1cmU6OTk0MjogcmVzdWx0OiB5ZXMKY29uZmlndXJl OjEwMDc4OiBjaGVja2luZyBmb3IgZ2V0cGFnZXNpemUKY29uZmlndXJlOjEwMTI4OiBjYyAtbyBj b25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1M L3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1CmNvbmZpZ3VyZToxMDEzMTogJD8gPSAwCmNv bmZpZ3VyZToxMDEzNDogdGVzdCAtcyBjb25mdGVzdApjb25maWd1cmU6MTAxMzc6ICQ/ID0gMApj b25maWd1cmU6MTAxNDg6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMDE1ODogY2hlY2tpbmcgZm9y IHdvcmtpbmcgbW1hcApjb25maWd1cmU6MTAzMDE6IGNjIC1vIGNvbmZ0ZXN0IC1PIC1waXBlIC1t Y3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xvY2FsL2xpYiBjb25m dGVzdC5jICA+JjUKY29uZmlndXJlOjEwMzA0OiAkPyA9IDAKY29uZmlndXJlOjEwMzA2OiAuL2Nv bmZ0ZXN0CmNvbmZpZ3VyZToxMDMwOTogJD8gPSAwCmNvbmZpZ3VyZToxMDMyMzogcmVzdWx0OiB5 ZXMKY29uZmlndXJlOjEwMzM1OiBjaGVja2luZyB3aGV0aGVyIHdlIGFyZSB1c2luZyB0aGUgR05V IEMgTGlicmFyeSAyLjEgb3IgbmV3ZXIKY29uZmlndXJlOjEwMzY5OjIyOiBmZWF0dXJlcy5oOiBO byBzdWNoIGZpbGUgb3IgZGlyZWN0b3J5CmNvbmZpZ3VyZToxMDM2NzogcmVzdWx0OiBubwpjb25m aWd1cmU6MTAzNzU6IGNoZWNraW5nIHdoZXRoZXIgaW50ZWdlciBkaXZpc2lvbiBieSB6ZXJvIHJh aXNlcyBTSUdGUEUKY29uZmlndXJlOjEwNDM4OiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNw dT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRl c3QuYyAgPiY1CmNvbmZpZ3VyZToxMDQ0MTogJD8gPSAwCmNvbmZpZ3VyZToxMDQ0MzogLi9jb25m dGVzdApjb25maWd1cmU6MTA0NDY6ICQ/ID0gMApjb25maWd1cmU6MTA0NjE6IHJlc3VsdDogeWVz CmNvbmZpZ3VyZToxMDQ3NDogY2hlY2tpbmcgZm9yIGludHR5cGVzLmgKY29uZmlndXJlOjEwNDk3 OiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNv bmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZToxMDUwMDogJD8gPSAwCmNvbmZpZ3VyZToxMDUwMzogdGVz dCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZToxMDUwNjogJD8gPSAwCmNvbmZpZ3VyZToxMDUxNzog cmVzdWx0OiB5ZXMKY29uZmlndXJlOjEwNTI4OiBjaGVja2luZyBmb3Igc3RkaW50LmgKY29uZmln dXJlOjEwNTUxOiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9p bmNsdWRlIGNvbmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZToxMDU1NDogJD8gPSAwCmNvbmZpZ3VyZTox MDU1NzogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZToxMDU2MDogJD8gPSAwCmNvbmZpZ3Vy ZToxMDU3MTogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjEwNTgyOiBjaGVja2luZyBmb3IgdW5zaWdu ZWQgbG9uZyBsb25nCmNvbmZpZ3VyZToxMDYwNTogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1j cHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0 ZXN0LmMgID4mNQpjb25maWd1cmU6MTA2MDg6ICQ/ID0gMApjb25maWd1cmU6MTA2MTE6IHRlc3Qg LXMgY29uZnRlc3QKY29uZmlndXJlOjEwNjE0OiAkPyA9IDAKY29uZmlndXJlOjEwNjI1OiByZXN1 bHQ6IHllcwpjb25maWd1cmU6MTA2NTE6IGNoZWNraW5nIGZvciBpbnR0eXBlcy5oCmNvbmZpZ3Vy ZToxMDY3NTogY2MgLWMgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5j bHVkZSBjb25mdGVzdC5jID4mNQpjb25maWd1cmU6MTA2Nzg6ICQ/ID0gMApjb25maWd1cmU6MTA2 ODE6IHRlc3QgLXMgY29uZnRlc3Qubwpjb25maWd1cmU6MTA2ODQ6ICQ/ID0gMApjb25maWd1cmU6 MTA2OTY6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMDcwOTogY2hlY2tpbmcgd2hldGhlciB0aGUg aW50dHlwZXMuaCBQUkl4Tk4gbWFjcm9zIGFyZSBicm9rZW4KY29uZmlndXJlOjEwNzM2OiBjYyAt YyAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0 LmMgPiY1CmNvbmZpZ3VyZToxMDczOTogJD8gPSAwCmNvbmZpZ3VyZToxMDc0MjogdGVzdCAtcyBj b25mdGVzdC5vCmNvbmZpZ3VyZToxMDc0NTogJD8gPSAwCmNvbmZpZ3VyZToxMDc1NzogcmVzdWx0 OiBubwpjb25maWd1cmU6MTA3OTU6IGNoZWNraW5nIGZvciBsZCB1c2VkIGJ5IEdDQwpjb25maWd1 cmU6MTA4NTg6IHJlc3VsdDogL3Vzci9iaW4vbGQKY29uZmlndXJlOjEwODY3OiBjaGVja2luZyBp ZiB0aGUgbGlua2VyICgvdXNyL2Jpbi9sZCkgaXMgR05VIGxkCkdOVSBsZCB2ZXJzaW9uIDIuMTMu MiBbRnJlZUJTRF0gMjAwMi0xMS0yNwpjb25maWd1cmU6MTA4Nzk6IHJlc3VsdDogeWVzCmNvbmZp Z3VyZToxMDg4NTogY2hlY2tpbmcgZm9yIHNoYXJlZCBsaWJyYXJ5IHJ1biBwYXRoIG9yaWdpbgpj b25maWd1cmU6MTA4OTg6IHJlc3VsdDogZG9uZQpjb25maWd1cmU6MTEzMjY6IGNoZWNraW5nIGFy Z3ouaCB1c2FiaWxpdHkKY29uZmlndXJlOjExMzM5OiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1wZW50 aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZToxMTM5 NToxODogYXJnei5oOiBObyBzdWNoIGZpbGUgb3IgZGlyZWN0b3J5CmNvbmZpZ3VyZToxMTM0Mjog JD8gPSAxCmNvbmZpZ3VyZTogZmFpbGVkIHByb2dyYW0gd2FzOgp8ICNsaW5lIDExMzI5ICJjb25m aWd1cmUiCnwgLyogY29uZmRlZnMuaC4gICovCnwgCnwgI2RlZmluZSBQQUNLQUdFX05BTUUgIiIK fCAjZGVmaW5lIFBBQ0tBR0VfVEFSTkFNRSAiIgp8ICNkZWZpbmUgUEFDS0FHRV9WRVJTSU9OICIi CnwgI2RlZmluZSBQQUNLQUdFX1NUUklORyAiIgp8ICNkZWZpbmUgUEFDS0FHRV9CVUdSRVBPUlQg IiIKfCAjZGVmaW5lIFBBQ0tBR0UgInhpbmUtdWkiCnwgI2RlZmluZSBWRVJTSU9OICIwLjkuMjIi CnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNkZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAxCnwg I2RlZmluZSBIQVZFX1NZU19TVEFUX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2Rl ZmluZSBIQVZFX1NUUklOR19IIDEKfCAjZGVmaW5lIEhBVkVfTUVNT1JZX0ggMQp8ICNkZWZpbmUg SEFWRV9TVFJJTkdTX0ggMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5lIEhB VkVfU1RESU5UX0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBTVERDX0hF QURFUlMgMQp8ICNkZWZpbmUgSEFWRV9ETEZDTl9IIDEKfCAjZGVmaW5lIEhBVkVfQUxMT0NBIDEK fCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2Rl ZmluZSBIQVZFX0dFVFBBR0VTSVpFIDEKfCAjZGVmaW5lIEhBVkVfTU1BUCAxCnwgI2RlZmluZSBJ TlRESVYwX1JBSVNFU19TSUdGUEUgMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IX1dJVEhfVUlO VE1BWCAxCnwgI2RlZmluZSBIQVZFX1NURElOVF9IX1dJVEhfVUlOVE1BWCAxCnwgI2RlZmluZSBI QVZFX1VOU0lHTkVEX0xPTkdfTE9ORyAxCnwgI2RlZmluZSBIQVZFX0lOVFRZUEVTX0ggMQp8IC8q IGVuZCBjb25mZGVmcy5oLiAgKi8KfCAjaW5jbHVkZSA8c3RkaW8uaD4KfCAjaWYgSEFWRV9TWVNf VFlQRVNfSAp8ICMgaW5jbHVkZSA8c3lzL3R5cGVzLmg+CnwgI2VuZGlmCnwgI2lmIEhBVkVfU1lT X1NUQVRfSAp8ICMgaW5jbHVkZSA8c3lzL3N0YXQuaD4KfCAjZW5kaWYKfCAjaWYgU1REQ19IRUFE RVJTCnwgIyBpbmNsdWRlIDxzdGRsaWIuaD4KfCAjIGluY2x1ZGUgPHN0ZGRlZi5oPgp8ICNlbHNl CnwgIyBpZiBIQVZFX1NURExJQl9ICnwgIyAgaW5jbHVkZSA8c3RkbGliLmg+CnwgIyBlbmRpZgp8 ICNlbmRpZgp8ICNpZiBIQVZFX1NUUklOR19ICnwgIyBpZiAhU1REQ19IRUFERVJTICYmIEhBVkVf TUVNT1JZX0gKfCAjICBpbmNsdWRlIDxtZW1vcnkuaD4KfCAjIGVuZGlmCnwgIyBpbmNsdWRlIDxz dHJpbmcuaD4KfCAjZW5kaWYKfCAjaWYgSEFWRV9TVFJJTkdTX0gKfCAjIGluY2x1ZGUgPHN0cmlu Z3MuaD4KfCAjZW5kaWYKfCAjaWYgSEFWRV9JTlRUWVBFU19ICnwgIyBpbmNsdWRlIDxpbnR0eXBl cy5oPgp8ICNlbHNlCnwgIyBpZiBIQVZFX1NURElOVF9ICnwgIyAgaW5jbHVkZSA8c3RkaW50Lmg+ CnwgIyBlbmRpZgp8ICNlbmRpZgp8ICNpZiBIQVZFX1VOSVNURF9ICnwgIyBpbmNsdWRlIDx1bmlz dGQuaD4KfCAjZW5kaWYKfCAjaW5jbHVkZSA8YXJnei5oPgpjb25maWd1cmU6MTEzNTg6IHJlc3Vs dDogbm8KY29uZmlndXJlOjExMzYyOiBjaGVja2luZyBhcmd6LmggcHJlc2VuY2UKY29uZmlndXJl OjExMzczOiBjYyAtRSAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jCmNvbmZpZ3VyZTox MTM5NzoxODogYXJnei5oOiBObyBzdWNoIGZpbGUgb3IgZGlyZWN0b3J5CmNvbmZpZ3VyZToxMTM3 OTogJD8gPSAxCmNvbmZpZ3VyZTogZmFpbGVkIHByb2dyYW0gd2FzOgp8ICNsaW5lIDExMzY1ICJj b25maWd1cmUiCnwgLyogY29uZmRlZnMuaC4gICovCnwgCnwgI2RlZmluZSBQQUNLQUdFX05BTUUg IiIKfCAjZGVmaW5lIFBBQ0tBR0VfVEFSTkFNRSAiIgp8ICNkZWZpbmUgUEFDS0FHRV9WRVJTSU9O ICIiCnwgI2RlZmluZSBQQUNLQUdFX1NUUklORyAiIgp8ICNkZWZpbmUgUEFDS0FHRV9CVUdSRVBP UlQgIiIKfCAjZGVmaW5lIFBBQ0tBR0UgInhpbmUtdWkiCnwgI2RlZmluZSBWRVJTSU9OICIwLjku MjIiCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNkZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAx CnwgI2RlZmluZSBIQVZFX1NZU19TVEFUX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwg I2RlZmluZSBIQVZFX1NUUklOR19IIDEKfCAjZGVmaW5lIEhBVkVfTUVNT1JZX0ggMQp8ICNkZWZp bmUgSEFWRV9TVFJJTkdTX0ggMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5l IEhBVkVfU1RESU5UX0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBTVERD X0hFQURFUlMgMQp8ICNkZWZpbmUgSEFWRV9ETEZDTl9IIDEKfCAjZGVmaW5lIEhBVkVfQUxMT0NB IDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwg I2RlZmluZSBIQVZFX0dFVFBBR0VTSVpFIDEKfCAjZGVmaW5lIEhBVkVfTU1BUCAxCnwgI2RlZmlu ZSBJTlRESVYwX1JBSVNFU19TSUdGUEUgMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IX1dJVEhf VUlOVE1BWCAxCnwgI2RlZmluZSBIQVZFX1NURElOVF9IX1dJVEhfVUlOVE1BWCAxCnwgI2RlZmlu ZSBIQVZFX1VOU0lHTkVEX0xPTkdfTE9ORyAxCnwgI2RlZmluZSBIQVZFX0lOVFRZUEVTX0ggMQp8 IC8qIGVuZCBjb25mZGVmcy5oLiAgKi8KfCAjaW5jbHVkZSA8YXJnei5oPgpjb25maWd1cmU6MTEz OTg6IHJlc3VsdDogbm8KY29uZmlndXJlOjExNDM0OiBjaGVja2luZyBmb3IgYXJnei5oCmNvbmZp Z3VyZToxMTQ0MTogcmVzdWx0OiBubwpjb25maWd1cmU6MTEzMjY6IGNoZWNraW5nIGxpbWl0cy5o IHVzYWJpbGl0eQpjb25maWd1cmU6MTEzMzk6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1w cm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjExMzQyOiAk PyA9IDAKY29uZmlndXJlOjExMzQ1OiB0ZXN0IC1zIGNvbmZ0ZXN0Lm8KY29uZmlndXJlOjExMzQ4 OiAkPyA9IDAKY29uZmlndXJlOjExMzU4OiByZXN1bHQ6IHllcwpjb25maWd1cmU6MTEzNjI6IGNo ZWNraW5nIGxpbWl0cy5oIHByZXNlbmNlCmNvbmZpZ3VyZToxMTM3MzogY2MgLUUgLUkvdXNyL2xv Y2FsL2luY2x1ZGUgY29uZnRlc3QuYwpjb25maWd1cmU6MTEzNzk6ICQ/ID0gMApjb25maWd1cmU6 MTEzOTg6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTQzNDogY2hlY2tpbmcgZm9yIGxpbWl0cy5o CmNvbmZpZ3VyZToxMTQ0MTogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExMzI2OiBjaGVja2luZyBs b2NhbGUuaCB1c2FiaWxpdHkKY29uZmlndXJlOjExMzM5OiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1w ZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZTox MTM0MjogJD8gPSAwCmNvbmZpZ3VyZToxMTM0NTogdGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3Vy ZToxMTM0ODogJD8gPSAwCmNvbmZpZ3VyZToxMTM1ODogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjEx MzYyOiBjaGVja2luZyBsb2NhbGUuaCBwcmVzZW5jZQpjb25maWd1cmU6MTEzNzM6IGNjIC1FIC1J L3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMKY29uZmlndXJlOjExMzc5OiAkPyA9IDAKY29u ZmlndXJlOjExMzk4OiByZXN1bHQ6IHllcwpjb25maWd1cmU6MTE0MzQ6IGNoZWNraW5nIGZvciBs b2NhbGUuaApjb25maWd1cmU6MTE0NDE6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTMyNjogY2hl Y2tpbmcgbmxfdHlwZXMuaCB1c2FiaWxpdHkKY29uZmlndXJlOjExMzM5OiBjYyAtYyAtTyAtcGlw ZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMgPiY1CmNv bmZpZ3VyZToxMTM0MjogJD8gPSAwCmNvbmZpZ3VyZToxMTM0NTogdGVzdCAtcyBjb25mdGVzdC5v CmNvbmZpZ3VyZToxMTM0ODogJD8gPSAwCmNvbmZpZ3VyZToxMTM1ODogcmVzdWx0OiB5ZXMKY29u ZmlndXJlOjExMzYyOiBjaGVja2luZyBubF90eXBlcy5oIHByZXNlbmNlCmNvbmZpZ3VyZToxMTM3 MzogY2MgLUUgLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYwpjb25maWd1cmU6MTEzNzk6 ICQ/ID0gMApjb25maWd1cmU6MTEzOTg6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTQzNDogY2hl Y2tpbmcgZm9yIG5sX3R5cGVzLmgKY29uZmlndXJlOjExNDQxOiByZXN1bHQ6IHllcwpjb25maWd1 cmU6MTEzMjY6IGNoZWNraW5nIG1hbGxvYy5oIHVzYWJpbGl0eQpjb25maWd1cmU6MTEzMzk6IGNj IC1jIC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRl c3QuYyA+JjUKSW4gZmlsZSBpbmNsdWRlZCBmcm9tIGNvbmZpZ3VyZToxMTM5ODoKL3Vzci9pbmNs dWRlL21hbGxvYy5oOjM6MjogI2Vycm9yICI8bWFsbG9jLmg+IGhhcyBiZWVuIHJlcGxhY2VkIGJ5 IDxzdGRsaWIuaD4iCmNvbmZpZ3VyZToxMTM0MjogJD8gPSAxCmNvbmZpZ3VyZTogZmFpbGVkIHBy b2dyYW0gd2FzOgp8ICNsaW5lIDExMzI5ICJjb25maWd1cmUiCnwgLyogY29uZmRlZnMuaC4gICov CnwgCnwgI2RlZmluZSBQQUNLQUdFX05BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVEFSTkFNRSAi Igp8ICNkZWZpbmUgUEFDS0FHRV9WRVJTSU9OICIiCnwgI2RlZmluZSBQQUNLQUdFX1NUUklORyAi Igp8ICNkZWZpbmUgUEFDS0FHRV9CVUdSRVBPUlQgIiIKfCAjZGVmaW5lIFBBQ0tBR0UgInhpbmUt dWkiCnwgI2RlZmluZSBWRVJTSU9OICIwLjkuMjIiCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8 ICNkZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX1NZU19TVEFUX0ggMQp8 ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR19IIDEKfCAjZGVm aW5lIEhBVkVfTUVNT1JZX0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJTkdTX0ggMQp8ICNkZWZpbmUg SEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1RESU5UX0ggMQp8ICNkZWZpbmUgSEFW RV9VTklTVERfSCAxCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNkZWZpbmUgSEFWRV9ETEZD Tl9IIDEKfCAjZGVmaW5lIEhBVkVfQUxMT0NBIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8 ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBIQVZFX0dFVFBBR0VTSVpFIDEKfCAj ZGVmaW5lIEhBVkVfTU1BUCAxCnwgI2RlZmluZSBJTlRESVYwX1JBSVNFU19TSUdGUEUgMQp8ICNk ZWZpbmUgSEFWRV9JTlRUWVBFU19IX1dJVEhfVUlOVE1BWCAxCnwgI2RlZmluZSBIQVZFX1NURElO VF9IX1dJVEhfVUlOVE1BWCAxCnwgI2RlZmluZSBIQVZFX1VOU0lHTkVEX0xPTkdfTE9ORyAxCnwg I2RlZmluZSBIQVZFX0lOVFRZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9MSU1JVFNfSCAxCnwgI2Rl ZmluZSBIQVZFX0xPQ0FMRV9IIDEKfCAjZGVmaW5lIEhBVkVfTkxfVFlQRVNfSCAxCnwgLyogZW5k IGNvbmZkZWZzLmguICAqLwp8ICNpbmNsdWRlIDxzdGRpby5oPgp8ICNpZiBIQVZFX1NZU19UWVBF U19ICnwgIyBpbmNsdWRlIDxzeXMvdHlwZXMuaD4KfCAjZW5kaWYKfCAjaWYgSEFWRV9TWVNfU1RB VF9ICnwgIyBpbmNsdWRlIDxzeXMvc3RhdC5oPgp8ICNlbmRpZgp8ICNpZiBTVERDX0hFQURFUlMK fCAjIGluY2x1ZGUgPHN0ZGxpYi5oPgp8ICMgaW5jbHVkZSA8c3RkZGVmLmg+CnwgI2Vsc2UKfCAj IGlmIEhBVkVfU1RETElCX0gKfCAjICBpbmNsdWRlIDxzdGRsaWIuaD4KfCAjIGVuZGlmCnwgI2Vu ZGlmCnwgI2lmIEhBVkVfU1RSSU5HX0gKfCAjIGlmICFTVERDX0hFQURFUlMgJiYgSEFWRV9NRU1P UllfSAp8ICMgIGluY2x1ZGUgPG1lbW9yeS5oPgp8ICMgZW5kaWYKfCAjIGluY2x1ZGUgPHN0cmlu Zy5oPgp8ICNlbmRpZgp8ICNpZiBIQVZFX1NUUklOR1NfSAp8ICMgaW5jbHVkZSA8c3RyaW5ncy5o Pgp8ICNlbmRpZgp8ICNpZiBIQVZFX0lOVFRZUEVTX0gKfCAjIGluY2x1ZGUgPGludHR5cGVzLmg+ CnwgI2Vsc2UKfCAjIGlmIEhBVkVfU1RESU5UX0gKfCAjICBpbmNsdWRlIDxzdGRpbnQuaD4KfCAj IGVuZGlmCnwgI2VuZGlmCnwgI2lmIEhBVkVfVU5JU1REX0gKfCAjIGluY2x1ZGUgPHVuaXN0ZC5o Pgp8ICNlbmRpZgp8ICNpbmNsdWRlIDxtYWxsb2MuaD4KY29uZmlndXJlOjExMzU4OiByZXN1bHQ6 IG5vCmNvbmZpZ3VyZToxMTM2MjogY2hlY2tpbmcgbWFsbG9jLmggcHJlc2VuY2UKY29uZmlndXJl OjExMzczOiBjYyAtRSAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jCkluIGZpbGUgaW5j bHVkZWQgZnJvbSBjb25maWd1cmU6MTE0MDA6Ci91c3IvaW5jbHVkZS9tYWxsb2MuaDozOjI6ICNl cnJvciAiPG1hbGxvYy5oPiBoYXMgYmVlbiByZXBsYWNlZCBieSA8c3RkbGliLmg+Igpjb25maWd1 cmU6MTEzNzk6ICQ/ID0gMQpjb25maWd1cmU6IGZhaWxlZCBwcm9ncmFtIHdhczoKfCAjbGluZSAx MTM2NSAiY29uZmlndXJlIgp8IC8qIGNvbmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FH RV9OQU1FICIiCnwgI2RlZmluZSBQQUNLQUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0Vf VkVSU0lPTiAiIgp8ICNkZWZpbmUgUEFDS0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0Vf QlVHUkVQT1JUICIiCnwgI2RlZmluZSBQQUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lP TiAiMC45LjIyIgp8ICNkZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1RZ UEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9TWVNfU1RBVF9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElC X0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJTkdfSCAxCnwgI2RlZmluZSBIQVZFX01FTU9SWV9IIDEK fCAjZGVmaW5lIEhBVkVfU1RSSU5HU19IIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSCAxCnwg I2RlZmluZSBIQVZFX1NURElOVF9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZp bmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfRExGQ05fSCAxCnwgI2RlZmluZSBIQVZF X0FMTE9DQSAxCnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1RE X0ggMQp8ICNkZWZpbmUgSEFWRV9HRVRQQUdFU0laRSAxCnwgI2RlZmluZSBIQVZFX01NQVAgMQp8 ICNkZWZpbmUgSU5URElWMF9SQUlTRVNfU0lHRlBFIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNf SF9XSVRIX1VJTlRNQVggMQp8ICNkZWZpbmUgSEFWRV9TVERJTlRfSF9XSVRIX1VJTlRNQVggMQp8 ICNkZWZpbmUgSEFWRV9VTlNJR05FRF9MT05HX0xPTkcgMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBF U19IIDEKfCAjZGVmaW5lIEhBVkVfTElNSVRTX0ggMQp8ICNkZWZpbmUgSEFWRV9MT0NBTEVfSCAx CnwgI2RlZmluZSBIQVZFX05MX1RZUEVTX0ggMQp8IC8qIGVuZCBjb25mZGVmcy5oLiAgKi8KfCAj aW5jbHVkZSA8bWFsbG9jLmg+CmNvbmZpZ3VyZToxMTM5ODogcmVzdWx0OiBubwpjb25maWd1cmU6 MTE0MzQ6IGNoZWNraW5nIGZvciBtYWxsb2MuaApjb25maWd1cmU6MTE0NDE6IHJlc3VsdDogbm8K Y29uZmlndXJlOjExMzI2OiBjaGVja2luZyBzdGRkZWYuaCB1c2FiaWxpdHkKY29uZmlndXJlOjEx MzM5OiBjYyAtYyAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRl IGNvbmZ0ZXN0LmMgPiY1CmNvbmZpZ3VyZToxMTM0MjogJD8gPSAwCmNvbmZpZ3VyZToxMTM0NTog dGVzdCAtcyBjb25mdGVzdC5vCmNvbmZpZ3VyZToxMTM0ODogJD8gPSAwCmNvbmZpZ3VyZToxMTM1 ODogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExMzYyOiBjaGVja2luZyBzdGRkZWYuaCBwcmVzZW5j ZQpjb25maWd1cmU6MTEzNzM6IGNjIC1FIC1JL3Vzci9sb2NhbC9pbmNsdWRlIGNvbmZ0ZXN0LmMK Y29uZmlndXJlOjExMzc5OiAkPyA9IDAKY29uZmlndXJlOjExMzk4OiByZXN1bHQ6IHllcwpjb25m aWd1cmU6MTE0MzQ6IGNoZWNraW5nIGZvciBzdGRkZWYuaApjb25maWd1cmU6MTE0NDE6IHJlc3Vs dDogeWVzCmNvbmZpZ3VyZToxMTMxNzogY2hlY2tpbmcgZm9yIHN0ZGxpYi5oCmNvbmZpZ3VyZTox MTMyMjogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExMzE3OiBjaGVja2luZyBmb3Igc3RyaW5nLmgK Y29uZmlndXJlOjExMzIyOiByZXN1bHQ6IHllcwpjb25maWd1cmU6MTEzMTc6IGNoZWNraW5nIGZv ciB1bmlzdGQuaApjb25maWd1cmU6MTEzMjI6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTMyNjog Y2hlY2tpbmcgc3lzL3BhcmFtLmggdXNhYmlsaXR5CmNvbmZpZ3VyZToxMTMzOTogY2MgLWMgLU8g LXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jID4m NQpjb25maWd1cmU6MTEzNDI6ICQ/ID0gMApjb25maWd1cmU6MTEzNDU6IHRlc3QgLXMgY29uZnRl c3Qubwpjb25maWd1cmU6MTEzNDg6ICQ/ID0gMApjb25maWd1cmU6MTEzNTg6IHJlc3VsdDogeWVz CmNvbmZpZ3VyZToxMTM2MjogY2hlY2tpbmcgc3lzL3BhcmFtLmggcHJlc2VuY2UKY29uZmlndXJl OjExMzczOiBjYyAtRSAtSS91c3IvbG9jYWwvaW5jbHVkZSBjb25mdGVzdC5jCmNvbmZpZ3VyZTox MTM3OTogJD8gPSAwCmNvbmZpZ3VyZToxMTM5ODogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExNDM0 OiBjaGVja2luZyBmb3Igc3lzL3BhcmFtLmgKY29uZmlndXJlOjExNDQxOiByZXN1bHQ6IHllcwpj b25maWd1cmU6MTE0ODA6IGNoZWNraW5nIGZvciBmZW9mX3VubG9ja2VkCmNvbmZpZ3VyZToxMTUz MDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwv aW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQpjb25maWd1cmU6MTE1MzM6 ICQ/ID0gMApjb25maWd1cmU6MTE1MzY6IHRlc3QgLXMgY29uZnRlc3QKY29uZmlndXJlOjExNTM5 OiAkPyA9IDAKY29uZmlndXJlOjExNTUwOiByZXN1bHQ6IHllcwpjb25maWd1cmU6MTE0ODA6IGNo ZWNraW5nIGZvciBmZ2V0c191bmxvY2tlZApjb25maWd1cmU6MTE1MzA6IGNjIC1vIGNvbmZ0ZXN0 IC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xv Y2FsL2xpYiBjb25mdGVzdC5jICA+JjUKL3Zhci90bXAvL2NjbWJxSVV2Lm86IEluIGZ1bmN0aW9u IGBtYWluJzoKL3Zhci90bXAvL2NjbWJxSVV2Lm8oLnRleHQrMHhmKTogdW5kZWZpbmVkIHJlZmVy ZW5jZSB0byBgZmdldHNfdW5sb2NrZWQnCi92YXIvdG1wLy9jY21icUlVdi5vKC5kYXRhKzB4MCk6 IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYGZnZXRzX3VubG9ja2VkJwpjb25maWd1cmU6MTE1MzM6 ICQ/ID0gMQpjb25maWd1cmU6IGZhaWxlZCBwcm9ncmFtIHdhczoKfCAjbGluZSAxMTQ4NiAiY29u ZmlndXJlIgp8IC8qIGNvbmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FHRV9OQU1FICIi CnwgI2RlZmluZSBQQUNLQUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVkVSU0lPTiAi Igp8ICNkZWZpbmUgUEFDS0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfQlVHUkVQT1JU ICIiCnwgI2RlZmluZSBQQUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lPTiAiMC45LjIy Igp8ICNkZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1RZUEVTX0ggMQp8 ICNkZWZpbmUgSEFWRV9TWVNfU1RBVF9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNk ZWZpbmUgSEFWRV9TVFJJTkdfSCAxCnwgI2RlZmluZSBIQVZFX01FTU9SWV9IIDEKfCAjZGVmaW5l IEhBVkVfU1RSSU5HU19IIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSCAxCnwgI2RlZmluZSBI QVZFX1NURElOVF9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgU1REQ19I RUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfRExGQ05fSCAxCnwgI2RlZmluZSBIQVZFX0FMTE9DQSAx CnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNk ZWZpbmUgSEFWRV9HRVRQQUdFU0laRSAxCnwgI2RlZmluZSBIQVZFX01NQVAgMQp8ICNkZWZpbmUg SU5URElWMF9SQUlTRVNfU0lHRlBFIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSF9XSVRIX1VJ TlRNQVggMQp8ICNkZWZpbmUgSEFWRV9TVERJTlRfSF9XSVRIX1VJTlRNQVggMQp8ICNkZWZpbmUg SEFWRV9VTlNJR05FRF9MT05HX0xPTkcgMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKfCAj ZGVmaW5lIEhBVkVfTElNSVRTX0ggMQp8ICNkZWZpbmUgSEFWRV9MT0NBTEVfSCAxCnwgI2RlZmlu ZSBIQVZFX05MX1RZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERERUZfSCAxCnwgI2RlZmluZSBI QVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HX0ggMQp8ICNkZWZpbmUgSEFWRV9V TklTVERfSCAxCnwgI2RlZmluZSBIQVZFX1NZU19QQVJBTV9IIDEKfCAjZGVmaW5lIEhBVkVfRkVP Rl9VTkxPQ0tFRCAxCnwgLyogZW5kIGNvbmZkZWZzLmguICAqLwp8IC8qIFN5c3RlbSBoZWFkZXIg dG8gZGVmaW5lIF9fc3R1YiBtYWNyb3MgYW5kIGhvcGVmdWxseSBmZXcgcHJvdG90eXBlcywKfCAg ICAgd2hpY2ggY2FuIGNvbmZsaWN0IHdpdGggY2hhciBmZ2V0c191bmxvY2tlZCAoKTsgYmVsb3cu CnwgICAgIFByZWZlciA8bGltaXRzLmg+IHRvIDxhc3NlcnQuaD4gaWYgX19TVERDX18gaXMgZGVm aW5lZCwgc2luY2UKfCAgICAgPGxpbWl0cy5oPiBleGlzdHMgZXZlbiBvbiBmcmVlc3RhbmRpbmcg Y29tcGlsZXJzLiAgKi8KfCAjaWZkZWYgX19TVERDX18KfCAjIGluY2x1ZGUgPGxpbWl0cy5oPgp8 ICNlbHNlCnwgIyBpbmNsdWRlIDxhc3NlcnQuaD4KfCAjZW5kaWYKfCAvKiBPdmVycmlkZSBhbnkg Z2NjMiBpbnRlcm5hbCBwcm90b3R5cGUgdG8gYXZvaWQgYW4gZXJyb3IuICAqLwp8ICNpZmRlZiBf X2NwbHVzcGx1cwp8IGV4dGVybiAiQyIKfCB7CnwgI2VuZGlmCnwgLyogV2UgdXNlIGNoYXIgYmVj YXVzZSBpbnQgbWlnaHQgbWF0Y2ggdGhlIHJldHVybiB0eXBlIG9mIGEgZ2NjMgp8ICAgIGJ1aWx0 aW4gYW5kIHRoZW4gaXRzIGFyZ3VtZW50IHByb3RvdHlwZSB3b3VsZCBzdGlsbCBhcHBseS4gICov CnwgY2hhciBmZ2V0c191bmxvY2tlZCAoKTsKfCAvKiBUaGUgR05VIEMgbGlicmFyeSBkZWZpbmVz IHRoaXMgZm9yIGZ1bmN0aW9ucyB3aGljaCBpdCBpbXBsZW1lbnRzCnwgICAgIHRvIGFsd2F5cyBm YWlsIHdpdGggRU5PU1lTLiAgU29tZSBmdW5jdGlvbnMgYXJlIGFjdHVhbGx5IG5hbWVkCnwgICAg IHNvbWV0aGluZyBzdGFydGluZyB3aXRoIF9fIGFuZCB0aGUgbm9ybWFsIG5hbWUgaXMgYW4gYWxp YXMuICAqLwp8ICNpZiBkZWZpbmVkIChfX3N0dWJfZmdldHNfdW5sb2NrZWQpIHx8IGRlZmluZWQg KF9fc3R1Yl9fX2ZnZXRzX3VubG9ja2VkKQp8IGNob2tlIG1lCnwgI2Vsc2UKfCBjaGFyICgqZikg KCkgPSBmZ2V0c191bmxvY2tlZDsKfCAjZW5kaWYKfCAjaWZkZWYgX19jcGx1c3BsdXMKfCB9Cnwg I2VuZGlmCnwgCnwgaW50CnwgbWFpbiAoKQp8IHsKfCByZXR1cm4gZiAhPSBmZ2V0c191bmxvY2tl ZDsKfCAgIDsKfCAgIHJldHVybiAwOwp8IH0KY29uZmlndXJlOjExNTUwOiByZXN1bHQ6IG5vCmNv bmZpZ3VyZToxMTQ4MDogY2hlY2tpbmcgZm9yIGdldGNfdW5sb2NrZWQKY29uZmlndXJlOjExNTMw OiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9p bmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1CmNvbmZpZ3VyZToxMTUzMzog JD8gPSAwCmNvbmZpZ3VyZToxMTUzNjogdGVzdCAtcyBjb25mdGVzdApjb25maWd1cmU6MTE1Mzk6 ICQ/ID0gMApjb25maWd1cmU6MTE1NTA6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTQ4MDogY2hl Y2tpbmcgZm9yIGdldGN3ZApjb25maWd1cmU6MTE1MzA6IGNjIC1vIGNvbmZ0ZXN0IC1PIC1waXBl IC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xvY2FsL2xpYiBj b25mdGVzdC5jICA+JjUKY29uZmlndXJlOjExNTMzOiAkPyA9IDAKY29uZmlndXJlOjExNTM2OiB0 ZXN0IC1zIGNvbmZ0ZXN0CmNvbmZpZ3VyZToxMTUzOTogJD8gPSAwCmNvbmZpZ3VyZToxMTU1MDog cmVzdWx0OiB5ZXMKY29uZmlndXJlOjExNDgwOiBjaGVja2luZyBmb3IgZ2V0ZWdpZApjb25maWd1 cmU6MTE1MzA6IGNjIC1vIGNvbmZ0ZXN0IC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNy L2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xvY2FsL2xpYiBjb25mdGVzdC5jICA+JjUKY29uZmlndXJl OjExNTMzOiAkPyA9IDAKY29uZmlndXJlOjExNTM2OiB0ZXN0IC1zIGNvbmZ0ZXN0CmNvbmZpZ3Vy ZToxMTUzOTogJD8gPSAwCmNvbmZpZ3VyZToxMTU1MDogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjEx NDgwOiBjaGVja2luZyBmb3IgZ2V0ZXVpZApjb25maWd1cmU6MTE1MzA6IGNjIC1vIGNvbmZ0ZXN0 IC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xv Y2FsL2xpYiBjb25mdGVzdC5jICA+JjUKY29uZmlndXJlOjExNTMzOiAkPyA9IDAKY29uZmlndXJl OjExNTM2OiB0ZXN0IC1zIGNvbmZ0ZXN0CmNvbmZpZ3VyZToxMTUzOTogJD8gPSAwCmNvbmZpZ3Vy ZToxMTU1MDogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExNDgwOiBjaGVja2luZyBmb3IgZ2V0Z2lk CmNvbmZpZ3VyZToxMTUzMDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBy byAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQpj b25maWd1cmU6MTE1MzM6ICQ/ID0gMApjb25maWd1cmU6MTE1MzY6IHRlc3QgLXMgY29uZnRlc3QK Y29uZmlndXJlOjExNTM5OiAkPyA9IDAKY29uZmlndXJlOjExNTUwOiByZXN1bHQ6IHllcwpjb25m aWd1cmU6MTE0ODA6IGNoZWNraW5nIGZvciBnZXR1aWQKY29uZmlndXJlOjExNTMwOiBjYyAtbyBj b25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1M L3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1CmNvbmZpZ3VyZToxMTUzMzogJD8gPSAwCmNv bmZpZ3VyZToxMTUzNjogdGVzdCAtcyBjb25mdGVzdApjb25maWd1cmU6MTE1Mzk6ICQ/ID0gMApj b25maWd1cmU6MTE1NTA6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTQ4MDogY2hlY2tpbmcgZm9y IG1lbXBjcHkKY29uZmlndXJlOjExNTMwOiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNwdT1w ZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRlc3Qu YyAgPiY1Ci92YXIvdG1wLy9jYzNERm1pNy5vOiBJbiBmdW5jdGlvbiBgbWFpbic6Ci92YXIvdG1w Ly9jYzNERm1pNy5vKC50ZXh0KzB4Zik6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYG1lbXBjcHkn Ci92YXIvdG1wLy9jYzNERm1pNy5vKC5kYXRhKzB4MCk6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8g YG1lbXBjcHknCmNvbmZpZ3VyZToxMTUzMzogJD8gPSAxCmNvbmZpZ3VyZTogZmFpbGVkIHByb2dy YW0gd2FzOgp8ICNsaW5lIDExNDg2ICJjb25maWd1cmUiCnwgLyogY29uZmRlZnMuaC4gICovCnwg CnwgI2RlZmluZSBQQUNLQUdFX05BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVEFSTkFNRSAiIgp8 ICNkZWZpbmUgUEFDS0FHRV9WRVJTSU9OICIiCnwgI2RlZmluZSBQQUNLQUdFX1NUUklORyAiIgp8 ICNkZWZpbmUgUEFDS0FHRV9CVUdSRVBPUlQgIiIKfCAjZGVmaW5lIFBBQ0tBR0UgInhpbmUtdWki CnwgI2RlZmluZSBWRVJTSU9OICIwLjkuMjIiCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNk ZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX1NZU19TVEFUX0ggMQp8ICNk ZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR19IIDEKfCAjZGVmaW5l IEhBVkVfTUVNT1JZX0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJTkdTX0ggMQp8ICNkZWZpbmUgSEFW RV9JTlRUWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1RESU5UX0ggMQp8ICNkZWZpbmUgSEFWRV9V TklTVERfSCAxCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNkZWZpbmUgSEFWRV9ETEZDTl9I IDEKfCAjZGVmaW5lIEhBVkVfQUxMT0NBIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNk ZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBIQVZFX0dFVFBBR0VTSVpFIDEKfCAjZGVm aW5lIEhBVkVfTU1BUCAxCnwgI2RlZmluZSBJTlRESVYwX1JBSVNFU19TSUdGUEUgMQp8ICNkZWZp bmUgSEFWRV9JTlRUWVBFU19IX1dJVEhfVUlOVE1BWCAxCnwgI2RlZmluZSBIQVZFX1NURElOVF9I X1dJVEhfVUlOVE1BWCAxCnwgI2RlZmluZSBIQVZFX1VOU0lHTkVEX0xPTkdfTE9ORyAxCnwgI2Rl ZmluZSBIQVZFX0lOVFRZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9MSU1JVFNfSCAxCnwgI2RlZmlu ZSBIQVZFX0xPQ0FMRV9IIDEKfCAjZGVmaW5lIEhBVkVfTkxfVFlQRVNfSCAxCnwgI2RlZmluZSBI QVZFX1NURERFRl9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNkZWZpbmUgSEFWRV9T VFJJTkdfSCAxCnwgI2RlZmluZSBIQVZFX1VOSVNURF9IIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1BB UkFNX0ggMQp8ICNkZWZpbmUgSEFWRV9GRU9GX1VOTE9DS0VEIDEKfCAjZGVmaW5lIEhBVkVfR0VU Q19VTkxPQ0tFRCAxCnwgI2RlZmluZSBIQVZFX0dFVENXRCAxCnwgI2RlZmluZSBIQVZFX0dFVEVH SUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRFVUlEIDEKfCAjZGVmaW5lIEhBVkVfR0VUR0lEIDEKfCAj ZGVmaW5lIEhBVkVfR0VUVUlEIDEKfCAvKiBlbmQgY29uZmRlZnMuaC4gICovCnwgLyogU3lzdGVt IGhlYWRlciB0byBkZWZpbmUgX19zdHViIG1hY3JvcyBhbmQgaG9wZWZ1bGx5IGZldyBwcm90b3R5 cGVzLAp8ICAgICB3aGljaCBjYW4gY29uZmxpY3Qgd2l0aCBjaGFyIG1lbXBjcHkgKCk7IGJlbG93 Lgp8ICAgICBQcmVmZXIgPGxpbWl0cy5oPiB0byA8YXNzZXJ0Lmg+IGlmIF9fU1REQ19fIGlzIGRl ZmluZWQsIHNpbmNlCnwgICAgIDxsaW1pdHMuaD4gZXhpc3RzIGV2ZW4gb24gZnJlZXN0YW5kaW5n IGNvbXBpbGVycy4gICovCnwgI2lmZGVmIF9fU1REQ19fCnwgIyBpbmNsdWRlIDxsaW1pdHMuaD4K fCAjZWxzZQp8ICMgaW5jbHVkZSA8YXNzZXJ0Lmg+CnwgI2VuZGlmCnwgLyogT3ZlcnJpZGUgYW55 IGdjYzIgaW50ZXJuYWwgcHJvdG90eXBlIHRvIGF2b2lkIGFuIGVycm9yLiAgKi8KfCAjaWZkZWYg X19jcGx1c3BsdXMKfCBleHRlcm4gIkMiCnwgewp8ICNlbmRpZgp8IC8qIFdlIHVzZSBjaGFyIGJl Y2F1c2UgaW50IG1pZ2h0IG1hdGNoIHRoZSByZXR1cm4gdHlwZSBvZiBhIGdjYzIKfCAgICBidWls dGluIGFuZCB0aGVuIGl0cyBhcmd1bWVudCBwcm90b3R5cGUgd291bGQgc3RpbGwgYXBwbHkuICAq Lwp8IGNoYXIgbWVtcGNweSAoKTsKfCAvKiBUaGUgR05VIEMgbGlicmFyeSBkZWZpbmVzIHRoaXMg Zm9yIGZ1bmN0aW9ucyB3aGljaCBpdCBpbXBsZW1lbnRzCnwgICAgIHRvIGFsd2F5cyBmYWlsIHdp dGggRU5PU1lTLiAgU29tZSBmdW5jdGlvbnMgYXJlIGFjdHVhbGx5IG5hbWVkCnwgICAgIHNvbWV0 aGluZyBzdGFydGluZyB3aXRoIF9fIGFuZCB0aGUgbm9ybWFsIG5hbWUgaXMgYW4gYWxpYXMuICAq Lwp8ICNpZiBkZWZpbmVkIChfX3N0dWJfbWVtcGNweSkgfHwgZGVmaW5lZCAoX19zdHViX19fbWVt cGNweSkKfCBjaG9rZSBtZQp8ICNlbHNlCnwgY2hhciAoKmYpICgpID0gbWVtcGNweTsKfCAjZW5k aWYKfCAjaWZkZWYgX19jcGx1c3BsdXMKfCB9CnwgI2VuZGlmCnwgCnwgaW50CnwgbWFpbiAoKQp8 IHsKfCByZXR1cm4gZiAhPSBtZW1wY3B5Owp8ICAgOwp8ICAgcmV0dXJuIDA7CnwgfQpjb25maWd1 cmU6MTE1NTA6IHJlc3VsdDogbm8KY29uZmlndXJlOjExNDgwOiBjaGVja2luZyBmb3IgbXVubWFw CmNvbmZpZ3VyZToxMTUzMDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBy byAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQpj b25maWd1cmU6MTE1MzM6ICQ/ID0gMApjb25maWd1cmU6MTE1MzY6IHRlc3QgLXMgY29uZnRlc3QK Y29uZmlndXJlOjExNTM5OiAkPyA9IDAKY29uZmlndXJlOjExNTUwOiByZXN1bHQ6IHllcwpjb25m aWd1cmU6MTE0ODA6IGNoZWNraW5nIGZvciBwdXRlbnYKY29uZmlndXJlOjExNTMwOiBjYyAtbyBj b25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1M L3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1CmNvbmZpZ3VyZToxMTUzMzogJD8gPSAwCmNv bmZpZ3VyZToxMTUzNjogdGVzdCAtcyBjb25mdGVzdApjb25maWd1cmU6MTE1Mzk6ICQ/ID0gMApj b25maWd1cmU6MTE1NTA6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTQ4MDogY2hlY2tpbmcgZm9y IHNldGVudgpjb25maWd1cmU6MTE1MzA6IGNjIC1vIGNvbmZ0ZXN0IC1PIC1waXBlIC1tY3B1PXBl bnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xvY2FsL2xpYiBjb25mdGVzdC5j ICA+JjUKY29uZmlndXJlOjExNTMzOiAkPyA9IDAKY29uZmlndXJlOjExNTM2OiB0ZXN0IC1zIGNv bmZ0ZXN0CmNvbmZpZ3VyZToxMTUzOTogJD8gPSAwCmNvbmZpZ3VyZToxMTU1MDogcmVzdWx0OiB5 ZXMKY29uZmlndXJlOjExNDgwOiBjaGVja2luZyBmb3Igc2V0bG9jYWxlCmNvbmZpZ3VyZToxMTUz MDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwv aW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQpjb25maWd1cmU6MTE1MzM6 ICQ/ID0gMApjb25maWd1cmU6MTE1MzY6IHRlc3QgLXMgY29uZnRlc3QKY29uZmlndXJlOjExNTM5 OiAkPyA9IDAKY29uZmlndXJlOjExNTUwOiByZXN1bHQ6IHllcwpjb25maWd1cmU6MTE0ODA6IGNo ZWNraW5nIGZvciBzdHBjcHkKY29uZmlndXJlOjExNTMwOiBjYyAtbyBjb25mdGVzdCAtTyAtcGlw ZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIg Y29uZnRlc3QuYyAgPiY1CmNvbmZpZ3VyZToxMTUzMzogJD8gPSAwCmNvbmZpZ3VyZToxMTUzNjog dGVzdCAtcyBjb25mdGVzdApjb25maWd1cmU6MTE1Mzk6ICQ/ID0gMApjb25maWd1cmU6MTE1NTA6 IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMTQ4MDogY2hlY2tpbmcgZm9yIHN0cmNhc2VjbXAKY29u ZmlndXJlOjExNTMwOiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1J L3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1CmNvbmZp Z3VyZToxMTUzMzogJD8gPSAwCmNvbmZpZ3VyZToxMTUzNjogdGVzdCAtcyBjb25mdGVzdApjb25m aWd1cmU6MTE1Mzk6ICQ/ID0gMApjb25maWd1cmU6MTE1NTA6IHJlc3VsdDogeWVzCmNvbmZpZ3Vy ZToxMTQ4MDogY2hlY2tpbmcgZm9yIHN0cmR1cApjb25maWd1cmU6MTE1MzA6IGNjIC1vIGNvbmZ0 ZXN0IC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgLUwvdXNy L2xvY2FsL2xpYiBjb25mdGVzdC5jICA+JjUKY29uZmlndXJlOjExNTMzOiAkPyA9IDAKY29uZmln dXJlOjExNTM2OiB0ZXN0IC1zIGNvbmZ0ZXN0CmNvbmZpZ3VyZToxMTUzOTogJD8gPSAwCmNvbmZp Z3VyZToxMTU1MDogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExNDgwOiBjaGVja2luZyBmb3Igc3Ry dG91bApjb25maWd1cmU6MTE1MzA6IGNjIC1vIGNvbmZ0ZXN0IC1PIC1waXBlIC1tY3B1PXBlbnRp dW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgLUwvdXNyL2xvY2FsL2xpYiBjb25mdGVzdC5jICA+ JjUKY29uZmlndXJlOjExNTMzOiAkPyA9IDAKY29uZmlndXJlOjExNTM2OiB0ZXN0IC1zIGNvbmZ0 ZXN0CmNvbmZpZ3VyZToxMTUzOTogJD8gPSAwCmNvbmZpZ3VyZToxMTU1MDogcmVzdWx0OiB5ZXMK Y29uZmlndXJlOjExNDgwOiBjaGVja2luZyBmb3IgdHNlYXJjaApjb25maWd1cmU6MTE1MzA6IGNj IC1vIGNvbmZ0ZXN0IC1PIC1waXBlIC1tY3B1PXBlbnRpdW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1 ZGUgLUwvdXNyL2xvY2FsL2xpYiBjb25mdGVzdC5jICA+JjUKY29uZmlndXJlOjExNTMzOiAkPyA9 IDAKY29uZmlndXJlOjExNTM2OiB0ZXN0IC1zIGNvbmZ0ZXN0CmNvbmZpZ3VyZToxMTUzOTogJD8g PSAwCmNvbmZpZ3VyZToxMTU1MDogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExNDgwOiBjaGVja2lu ZyBmb3IgX19hcmd6X2NvdW50CmNvbmZpZ3VyZToxMTUzMDogY2MgLW8gY29uZnRlc3QgLU8gLXBp cGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGli IGNvbmZ0ZXN0LmMgID4mNQovdmFyL3RtcC8vY2MyZHI5Q0gubzogSW4gZnVuY3Rpb24gYG1haW4n OgovdmFyL3RtcC8vY2MyZHI5Q0gubygudGV4dCsweGYpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRv IGBfX2FyZ3pfY291bnQnCi92YXIvdG1wLy9jYzJkcjlDSC5vKC5kYXRhKzB4MCk6IHVuZGVmaW5l ZCByZWZlcmVuY2UgdG8gYF9fYXJnel9jb3VudCcKY29uZmlndXJlOjExNTMzOiAkPyA9IDEKY29u ZmlndXJlOiBmYWlsZWQgcHJvZ3JhbSB3YXM6CnwgI2xpbmUgMTE0ODYgImNvbmZpZ3VyZSIKfCAv KiBjb25mZGVmcy5oLiAgKi8KfCAKfCAjZGVmaW5lIFBBQ0tBR0VfTkFNRSAiIgp8ICNkZWZpbmUg UEFDS0FHRV9UQVJOQU1FICIiCnwgI2RlZmluZSBQQUNLQUdFX1ZFUlNJT04gIiIKfCAjZGVmaW5l IFBBQ0tBR0VfU1RSSU5HICIiCnwgI2RlZmluZSBQQUNLQUdFX0JVR1JFUE9SVCAiIgp8ICNkZWZp bmUgUEFDS0FHRSAieGluZS11aSIKfCAjZGVmaW5lIFZFUlNJT04gIjAuOS4yMiIKfCAjZGVmaW5l IFNURENfSEVBREVSUyAxCnwgI2RlZmluZSBIQVZFX1NZU19UWVBFU19IIDEKfCAjZGVmaW5lIEhB VkVfU1lTX1NUQVRfSCAxCnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVf U1RSSU5HX0ggMQp8ICNkZWZpbmUgSEFWRV9NRU1PUllfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklO R1NfSCAxCnwgI2RlZmluZSBIQVZFX0lOVFRZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERJTlRf SCAxCnwgI2RlZmluZSBIQVZFX1VOSVNURF9IIDEKfCAjZGVmaW5lIFNURENfSEVBREVSUyAxCnwg I2RlZmluZSBIQVZFX0RMRkNOX0ggMQp8ICNkZWZpbmUgSEFWRV9BTExPQ0EgMQp8ICNkZWZpbmUg SEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZFX1VOSVNURF9IIDEKfCAjZGVmaW5lIEhBVkVf R0VUUEFHRVNJWkUgMQp8ICNkZWZpbmUgSEFWRV9NTUFQIDEKfCAjZGVmaW5lIElOVERJVjBfUkFJ U0VTX1NJR0ZQRSAxCnwgI2RlZmluZSBIQVZFX0lOVFRZUEVTX0hfV0lUSF9VSU5UTUFYIDEKfCAj ZGVmaW5lIEhBVkVfU1RESU5UX0hfV0lUSF9VSU5UTUFYIDEKfCAjZGVmaW5lIEhBVkVfVU5TSUdO RURfTE9OR19MT05HIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZF X0xJTUlUU19IIDEKfCAjZGVmaW5lIEhBVkVfTE9DQUxFX0ggMQp8ICNkZWZpbmUgSEFWRV9OTF9U WVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1REREVGX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJf SCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR19IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8 ICNkZWZpbmUgSEFWRV9TWVNfUEFSQU1fSCAxCnwgI2RlZmluZSBIQVZFX0ZFT0ZfVU5MT0NLRUQg MQp8ICNkZWZpbmUgSEFWRV9HRVRDX1VOTE9DS0VEIDEKfCAjZGVmaW5lIEhBVkVfR0VUQ1dEIDEK fCAjZGVmaW5lIEhBVkVfR0VURUdJRCAxCnwgI2RlZmluZSBIQVZFX0dFVEVVSUQgMQp8ICNkZWZp bmUgSEFWRV9HRVRHSUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRVSUQgMQp8ICNkZWZpbmUgSEFWRV9N VU5NQVAgMQp8ICNkZWZpbmUgSEFWRV9QVVRFTlYgMQp8ICNkZWZpbmUgSEFWRV9TRVRFTlYgMQp8 ICNkZWZpbmUgSEFWRV9TRVRMT0NBTEUgMQp8ICNkZWZpbmUgSEFWRV9TVFBDUFkgMQp8ICNkZWZp bmUgSEFWRV9TVFJDQVNFQ01QIDEKfCAjZGVmaW5lIEhBVkVfU1RSRFVQIDEKfCAjZGVmaW5lIEhB VkVfU1RSVE9VTCAxCnwgI2RlZmluZSBIQVZFX1RTRUFSQ0ggMQp8IC8qIGVuZCBjb25mZGVmcy5o LiAgKi8KfCAvKiBTeXN0ZW0gaGVhZGVyIHRvIGRlZmluZSBfX3N0dWIgbWFjcm9zIGFuZCBob3Bl ZnVsbHkgZmV3IHByb3RvdHlwZXMsCnwgICAgIHdoaWNoIGNhbiBjb25mbGljdCB3aXRoIGNoYXIg X19hcmd6X2NvdW50ICgpOyBiZWxvdy4KfCAgICAgUHJlZmVyIDxsaW1pdHMuaD4gdG8gPGFzc2Vy dC5oPiBpZiBfX1NURENfXyBpcyBkZWZpbmVkLCBzaW5jZQp8ICAgICA8bGltaXRzLmg+IGV4aXN0 cyBldmVuIG9uIGZyZWVzdGFuZGluZyBjb21waWxlcnMuICAqLwp8ICNpZmRlZiBfX1NURENfXwp8 ICMgaW5jbHVkZSA8bGltaXRzLmg+CnwgI2Vsc2UKfCAjIGluY2x1ZGUgPGFzc2VydC5oPgp8ICNl bmRpZgp8IC8qIE92ZXJyaWRlIGFueSBnY2MyIGludGVybmFsIHByb3RvdHlwZSB0byBhdm9pZCBh biBlcnJvci4gICovCnwgI2lmZGVmIF9fY3BsdXNwbHVzCnwgZXh0ZXJuICJDIgp8IHsKfCAjZW5k aWYKfCAvKiBXZSB1c2UgY2hhciBiZWNhdXNlIGludCBtaWdodCBtYXRjaCB0aGUgcmV0dXJuIHR5 cGUgb2YgYSBnY2MyCnwgICAgYnVpbHRpbiBhbmQgdGhlbiBpdHMgYXJndW1lbnQgcHJvdG90eXBl IHdvdWxkIHN0aWxsIGFwcGx5LiAgKi8KfCBjaGFyIF9fYXJnel9jb3VudCAoKTsKfCAvKiBUaGUg R05VIEMgbGlicmFyeSBkZWZpbmVzIHRoaXMgZm9yIGZ1bmN0aW9ucyB3aGljaCBpdCBpbXBsZW1l bnRzCnwgICAgIHRvIGFsd2F5cyBmYWlsIHdpdGggRU5PU1lTLiAgU29tZSBmdW5jdGlvbnMgYXJl IGFjdHVhbGx5IG5hbWVkCnwgICAgIHNvbWV0aGluZyBzdGFydGluZyB3aXRoIF9fIGFuZCB0aGUg bm9ybWFsIG5hbWUgaXMgYW4gYWxpYXMuICAqLwp8ICNpZiBkZWZpbmVkIChfX3N0dWJfX19hcmd6 X2NvdW50KSB8fCBkZWZpbmVkIChfX3N0dWJfX19fX2FyZ3pfY291bnQpCnwgY2hva2UgbWUKfCAj ZWxzZQp8IGNoYXIgKCpmKSAoKSA9IF9fYXJnel9jb3VudDsKfCAjZW5kaWYKfCAjaWZkZWYgX19j cGx1c3BsdXMKfCB9CnwgI2VuZGlmCnwgCnwgaW50CnwgbWFpbiAoKQp8IHsKfCByZXR1cm4gZiAh PSBfX2FyZ3pfY291bnQ7CnwgICA7CnwgICByZXR1cm4gMDsKfCB9CmNvbmZpZ3VyZToxMTU1MDog cmVzdWx0OiBubwpjb25maWd1cmU6MTE0ODA6IGNoZWNraW5nIGZvciBfX2FyZ3pfc3RyaW5naWZ5 CmNvbmZpZ3VyZToxMTUzMDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBy byAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQov dmFyL3RtcC8vY2NyUk9wMzMubzogSW4gZnVuY3Rpb24gYG1haW4nOgovdmFyL3RtcC8vY2NyUk9w MzMubygudGV4dCsweGYpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBfX2FyZ3pfc3RyaW5naWZ5 JwovdmFyL3RtcC8vY2NyUk9wMzMubyguZGF0YSsweDApOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRv IGBfX2FyZ3pfc3RyaW5naWZ5Jwpjb25maWd1cmU6MTE1MzM6ICQ/ID0gMQpjb25maWd1cmU6IGZh aWxlZCBwcm9ncmFtIHdhczoKfCAjbGluZSAxMTQ4NiAiY29uZmlndXJlIgp8IC8qIGNvbmZkZWZz LmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FHRV9OQU1FICIiCnwgI2RlZmluZSBQQUNLQUdFX1RB Uk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVkVSU0lPTiAiIgp8ICNkZWZpbmUgUEFDS0FHRV9T VFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfQlVHUkVQT1JUICIiCnwgI2RlZmluZSBQQUNLQUdF ICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lPTiAiMC45LjIyIgp8ICNkZWZpbmUgU1REQ19IRUFE RVJTIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1RZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9TWVNfU1RB VF9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJTkdfSCAx CnwgI2RlZmluZSBIQVZFX01FTU9SWV9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HU19IIDEKfCAj ZGVmaW5lIEhBVkVfSU5UVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX1NURElOVF9IIDEKfCAjZGVm aW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhB VkVfRExGQ05fSCAxCnwgI2RlZmluZSBIQVZFX0FMTE9DQSAxCnwgI2RlZmluZSBIQVZFX1NURExJ Ql9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgSEFWRV9HRVRQQUdFU0la RSAxCnwgI2RlZmluZSBIQVZFX01NQVAgMQp8ICNkZWZpbmUgSU5URElWMF9SQUlTRVNfU0lHRlBF IDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSF9XSVRIX1VJTlRNQVggMQp8ICNkZWZpbmUgSEFW RV9TVERJTlRfSF9XSVRIX1VJTlRNQVggMQp8ICNkZWZpbmUgSEFWRV9VTlNJR05FRF9MT05HX0xP TkcgMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfTElNSVRTX0gg MQp8ICNkZWZpbmUgSEFWRV9MT0NBTEVfSCAxCnwgI2RlZmluZSBIQVZFX05MX1RZUEVTX0ggMQp8 ICNkZWZpbmUgSEFWRV9TVERERUZfSCAxCnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEKfCAjZGVm aW5lIEhBVkVfU1RSSU5HX0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBI QVZFX1NZU19QQVJBTV9IIDEKfCAjZGVmaW5lIEhBVkVfRkVPRl9VTkxPQ0tFRCAxCnwgI2RlZmlu ZSBIQVZFX0dFVENfVU5MT0NLRUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRDV0QgMQp8ICNkZWZpbmUg SEFWRV9HRVRFR0lEIDEKfCAjZGVmaW5lIEhBVkVfR0VURVVJRCAxCnwgI2RlZmluZSBIQVZFX0dF VEdJRCAxCnwgI2RlZmluZSBIQVZFX0dFVFVJRCAxCnwgI2RlZmluZSBIQVZFX01VTk1BUCAxCnwg I2RlZmluZSBIQVZFX1BVVEVOViAxCnwgI2RlZmluZSBIQVZFX1NFVEVOViAxCnwgI2RlZmluZSBI QVZFX1NFVExPQ0FMRSAxCnwgI2RlZmluZSBIQVZFX1NUUENQWSAxCnwgI2RlZmluZSBIQVZFX1NU UkNBU0VDTVAgMQp8ICNkZWZpbmUgSEFWRV9TVFJEVVAgMQp8ICNkZWZpbmUgSEFWRV9TVFJUT1VM IDEKfCAjZGVmaW5lIEhBVkVfVFNFQVJDSCAxCnwgLyogZW5kIGNvbmZkZWZzLmguICAqLwp8IC8q IFN5c3RlbSBoZWFkZXIgdG8gZGVmaW5lIF9fc3R1YiBtYWNyb3MgYW5kIGhvcGVmdWxseSBmZXcg cHJvdG90eXBlcywKfCAgICAgd2hpY2ggY2FuIGNvbmZsaWN0IHdpdGggY2hhciBfX2FyZ3pfc3Ry aW5naWZ5ICgpOyBiZWxvdy4KfCAgICAgUHJlZmVyIDxsaW1pdHMuaD4gdG8gPGFzc2VydC5oPiBp ZiBfX1NURENfXyBpcyBkZWZpbmVkLCBzaW5jZQp8ICAgICA8bGltaXRzLmg+IGV4aXN0cyBldmVu IG9uIGZyZWVzdGFuZGluZyBjb21waWxlcnMuICAqLwp8ICNpZmRlZiBfX1NURENfXwp8ICMgaW5j bHVkZSA8bGltaXRzLmg+CnwgI2Vsc2UKfCAjIGluY2x1ZGUgPGFzc2VydC5oPgp8ICNlbmRpZgp8 IC8qIE92ZXJyaWRlIGFueSBnY2MyIGludGVybmFsIHByb3RvdHlwZSB0byBhdm9pZCBhbiBlcnJv ci4gICovCnwgI2lmZGVmIF9fY3BsdXNwbHVzCnwgZXh0ZXJuICJDIgp8IHsKfCAjZW5kaWYKfCAv KiBXZSB1c2UgY2hhciBiZWNhdXNlIGludCBtaWdodCBtYXRjaCB0aGUgcmV0dXJuIHR5cGUgb2Yg YSBnY2MyCnwgICAgYnVpbHRpbiBhbmQgdGhlbiBpdHMgYXJndW1lbnQgcHJvdG90eXBlIHdvdWxk IHN0aWxsIGFwcGx5LiAgKi8KfCBjaGFyIF9fYXJnel9zdHJpbmdpZnkgKCk7CnwgLyogVGhlIEdO VSBDIGxpYnJhcnkgZGVmaW5lcyB0aGlzIGZvciBmdW5jdGlvbnMgd2hpY2ggaXQgaW1wbGVtZW50 cwp8ICAgICB0byBhbHdheXMgZmFpbCB3aXRoIEVOT1NZUy4gIFNvbWUgZnVuY3Rpb25zIGFyZSBh Y3R1YWxseSBuYW1lZAp8ICAgICBzb21ldGhpbmcgc3RhcnRpbmcgd2l0aCBfXyBhbmQgdGhlIG5v cm1hbCBuYW1lIGlzIGFuIGFsaWFzLiAgKi8KfCAjaWYgZGVmaW5lZCAoX19zdHViX19fYXJnel9z dHJpbmdpZnkpIHx8IGRlZmluZWQgKF9fc3R1Yl9fX19fYXJnel9zdHJpbmdpZnkpCnwgY2hva2Ug bWUKfCAjZWxzZQp8IGNoYXIgKCpmKSAoKSA9IF9fYXJnel9zdHJpbmdpZnk7CnwgI2VuZGlmCnwg I2lmZGVmIF9fY3BsdXNwbHVzCnwgfQp8ICNlbmRpZgp8IAp8IGludAp8IG1haW4gKCkKfCB7Cnwg cmV0dXJuIGYgIT0gX19hcmd6X3N0cmluZ2lmeTsKfCAgIDsKfCAgIHJldHVybiAwOwp8IH0KY29u ZmlndXJlOjExNTUwOiByZXN1bHQ6IG5vCmNvbmZpZ3VyZToxMTQ4MDogY2hlY2tpbmcgZm9yIF9f YXJnel9uZXh0CmNvbmZpZ3VyZToxMTUzMDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9 cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0 LmMgID4mNQovdmFyL3RtcC8vY2NOWnRqUDEubzogSW4gZnVuY3Rpb24gYG1haW4nOgovdmFyL3Rt cC8vY2NOWnRqUDEubygudGV4dCsweGYpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBfX2FyZ3pf bmV4dCcKL3Zhci90bXAvL2NjTlp0alAxLm8oLmRhdGErMHgwKTogdW5kZWZpbmVkIHJlZmVyZW5j ZSB0byBgX19hcmd6X25leHQnCmNvbmZpZ3VyZToxMTUzMzogJD8gPSAxCmNvbmZpZ3VyZTogZmFp bGVkIHByb2dyYW0gd2FzOgp8ICNsaW5lIDExNDg2ICJjb25maWd1cmUiCnwgLyogY29uZmRlZnMu aC4gICovCnwgCnwgI2RlZmluZSBQQUNLQUdFX05BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVEFS TkFNRSAiIgp8ICNkZWZpbmUgUEFDS0FHRV9WRVJTSU9OICIiCnwgI2RlZmluZSBQQUNLQUdFX1NU UklORyAiIgp8ICNkZWZpbmUgUEFDS0FHRV9CVUdSRVBPUlQgIiIKfCAjZGVmaW5lIFBBQ0tBR0Ug InhpbmUtdWkiCnwgI2RlZmluZSBWRVJTSU9OICIwLjkuMjIiCnwgI2RlZmluZSBTVERDX0hFQURF UlMgMQp8ICNkZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX1NZU19TVEFU X0ggMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR19IIDEK fCAjZGVmaW5lIEhBVkVfTUVNT1JZX0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJTkdTX0ggMQp8ICNk ZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1RESU5UX0ggMQp8ICNkZWZp bmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBTVERDX0hFQURFUlMgMQp8ICNkZWZpbmUgSEFW RV9ETEZDTl9IIDEKfCAjZGVmaW5lIEhBVkVfQUxMT0NBIDEKfCAjZGVmaW5lIEhBVkVfU1RETElC X0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBIQVZFX0dFVFBBR0VTSVpF IDEKfCAjZGVmaW5lIEhBVkVfTU1BUCAxCnwgI2RlZmluZSBJTlRESVYwX1JBSVNFU19TSUdGUEUg MQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IX1dJVEhfVUlOVE1BWCAxCnwgI2RlZmluZSBIQVZF X1NURElOVF9IX1dJVEhfVUlOVE1BWCAxCnwgI2RlZmluZSBIQVZFX1VOU0lHTkVEX0xPTkdfTE9O RyAxCnwgI2RlZmluZSBIQVZFX0lOVFRZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9MSU1JVFNfSCAx CnwgI2RlZmluZSBIQVZFX0xPQ0FMRV9IIDEKfCAjZGVmaW5lIEhBVkVfTkxfVFlQRVNfSCAxCnwg I2RlZmluZSBIQVZFX1NURERFRl9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNkZWZp bmUgSEFWRV9TVFJJTkdfSCAxCnwgI2RlZmluZSBIQVZFX1VOSVNURF9IIDEKfCAjZGVmaW5lIEhB VkVfU1lTX1BBUkFNX0ggMQp8ICNkZWZpbmUgSEFWRV9GRU9GX1VOTE9DS0VEIDEKfCAjZGVmaW5l IEhBVkVfR0VUQ19VTkxPQ0tFRCAxCnwgI2RlZmluZSBIQVZFX0dFVENXRCAxCnwgI2RlZmluZSBI QVZFX0dFVEVHSUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRFVUlEIDEKfCAjZGVmaW5lIEhBVkVfR0VU R0lEIDEKfCAjZGVmaW5lIEhBVkVfR0VUVUlEIDEKfCAjZGVmaW5lIEhBVkVfTVVOTUFQIDEKfCAj ZGVmaW5lIEhBVkVfUFVURU5WIDEKfCAjZGVmaW5lIEhBVkVfU0VURU5WIDEKfCAjZGVmaW5lIEhB VkVfU0VUTE9DQUxFIDEKfCAjZGVmaW5lIEhBVkVfU1RQQ1BZIDEKfCAjZGVmaW5lIEhBVkVfU1RS Q0FTRUNNUCAxCnwgI2RlZmluZSBIQVZFX1NUUkRVUCAxCnwgI2RlZmluZSBIQVZFX1NUUlRPVUwg MQp8ICNkZWZpbmUgSEFWRV9UU0VBUkNIIDEKfCAvKiBlbmQgY29uZmRlZnMuaC4gICovCnwgLyog U3lzdGVtIGhlYWRlciB0byBkZWZpbmUgX19zdHViIG1hY3JvcyBhbmQgaG9wZWZ1bGx5IGZldyBw cm90b3R5cGVzLAp8ICAgICB3aGljaCBjYW4gY29uZmxpY3Qgd2l0aCBjaGFyIF9fYXJnel9uZXh0 ICgpOyBiZWxvdy4KfCAgICAgUHJlZmVyIDxsaW1pdHMuaD4gdG8gPGFzc2VydC5oPiBpZiBfX1NU RENfXyBpcyBkZWZpbmVkLCBzaW5jZQp8ICAgICA8bGltaXRzLmg+IGV4aXN0cyBldmVuIG9uIGZy ZWVzdGFuZGluZyBjb21waWxlcnMuICAqLwp8ICNpZmRlZiBfX1NURENfXwp8ICMgaW5jbHVkZSA8 bGltaXRzLmg+CnwgI2Vsc2UKfCAjIGluY2x1ZGUgPGFzc2VydC5oPgp8ICNlbmRpZgp8IC8qIE92 ZXJyaWRlIGFueSBnY2MyIGludGVybmFsIHByb3RvdHlwZSB0byBhdm9pZCBhbiBlcnJvci4gICov CnwgI2lmZGVmIF9fY3BsdXNwbHVzCnwgZXh0ZXJuICJDIgp8IHsKfCAjZW5kaWYKfCAvKiBXZSB1 c2UgY2hhciBiZWNhdXNlIGludCBtaWdodCBtYXRjaCB0aGUgcmV0dXJuIHR5cGUgb2YgYSBnY2My CnwgICAgYnVpbHRpbiBhbmQgdGhlbiBpdHMgYXJndW1lbnQgcHJvdG90eXBlIHdvdWxkIHN0aWxs IGFwcGx5LiAgKi8KfCBjaGFyIF9fYXJnel9uZXh0ICgpOwp8IC8qIFRoZSBHTlUgQyBsaWJyYXJ5 IGRlZmluZXMgdGhpcyBmb3IgZnVuY3Rpb25zIHdoaWNoIGl0IGltcGxlbWVudHMKfCAgICAgdG8g YWx3YXlzIGZhaWwgd2l0aCBFTk9TWVMuICBTb21lIGZ1bmN0aW9ucyBhcmUgYWN0dWFsbHkgbmFt ZWQKfCAgICAgc29tZXRoaW5nIHN0YXJ0aW5nIHdpdGggX18gYW5kIHRoZSBub3JtYWwgbmFtZSBp cyBhbiBhbGlhcy4gICovCnwgI2lmIGRlZmluZWQgKF9fc3R1Yl9fX2FyZ3pfbmV4dCkgfHwgZGVm aW5lZCAoX19zdHViX19fX19hcmd6X25leHQpCnwgY2hva2UgbWUKfCAjZWxzZQp8IGNoYXIgKCpm KSAoKSA9IF9fYXJnel9uZXh0Owp8ICNlbmRpZgp8ICNpZmRlZiBfX2NwbHVzcGx1cwp8IH0KfCAj ZW5kaWYKfCAKfCBpbnQKfCBtYWluICgpCnwgewp8IHJldHVybiBmICE9IF9fYXJnel9uZXh0Owp8 ICAgOwp8ICAgcmV0dXJuIDA7CnwgfQpjb25maWd1cmU6MTE1NTA6IHJlc3VsdDogbm8KY29uZmln dXJlOjExNTkxOiBjaGVja2luZyBmb3IgaWNvbnYKY29uZmlndXJlOjExNjE5OiBjYyAtbyBjb25m dGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vz ci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1Ci92YXIvdG1wLy9jY1h2WTNtZS5vOiBJbiBmdW5j dGlvbiBgbWFpbic6Ci92YXIvdG1wLy9jY1h2WTNtZS5vKC50ZXh0KzB4MWMpOiB1bmRlZmluZWQg cmVmZXJlbmNlIHRvIGBsaWJpY29udl9vcGVuJwovdmFyL3RtcC8vY2NYdlkzbWUubygudGV4dCsw eDQ2KTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgbGliaWNvbnYnCi92YXIvdG1wLy9jY1h2WTNt ZS5vKC50ZXh0KzB4NGUpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBsaWJpY29udl9jbG9zZScK Y29uZmlndXJlOjExNjIyOiAkPyA9IDEKY29uZmlndXJlOiBmYWlsZWQgcHJvZ3JhbSB3YXM6Cnwg I2xpbmUgMTE2MDAgImNvbmZpZ3VyZSIKfCAvKiBjb25mZGVmcy5oLiAgKi8KfCAKfCAjZGVmaW5l IFBBQ0tBR0VfTkFNRSAiIgp8ICNkZWZpbmUgUEFDS0FHRV9UQVJOQU1FICIiCnwgI2RlZmluZSBQ QUNLQUdFX1ZFUlNJT04gIiIKfCAjZGVmaW5lIFBBQ0tBR0VfU1RSSU5HICIiCnwgI2RlZmluZSBQ QUNLQUdFX0JVR1JFUE9SVCAiIgp8ICNkZWZpbmUgUEFDS0FHRSAieGluZS11aSIKfCAjZGVmaW5l IFZFUlNJT04gIjAuOS4yMiIKfCAjZGVmaW5lIFNURENfSEVBREVSUyAxCnwgI2RlZmluZSBIQVZF X1NZU19UWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1NUQVRfSCAxCnwgI2RlZmluZSBIQVZF X1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HX0ggMQp8ICNkZWZpbmUgSEFWRV9NRU1P UllfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR1NfSCAxCnwgI2RlZmluZSBIQVZFX0lOVFRZUEVT X0ggMQp8ICNkZWZpbmUgSEFWRV9TVERJTlRfSCAxCnwgI2RlZmluZSBIQVZFX1VOSVNURF9IIDEK fCAjZGVmaW5lIFNURENfSEVBREVSUyAxCnwgI2RlZmluZSBIQVZFX0RMRkNOX0ggMQp8ICNkZWZp bmUgSEFWRV9BTExPQ0EgMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZF X1VOSVNURF9IIDEKfCAjZGVmaW5lIEhBVkVfR0VUUEFHRVNJWkUgMQp8ICNkZWZpbmUgSEFWRV9N TUFQIDEKfCAjZGVmaW5lIElOVERJVjBfUkFJU0VTX1NJR0ZQRSAxCnwgI2RlZmluZSBIQVZFX0lO VFRZUEVTX0hfV0lUSF9VSU5UTUFYIDEKfCAjZGVmaW5lIEhBVkVfU1RESU5UX0hfV0lUSF9VSU5U TUFYIDEKfCAjZGVmaW5lIEhBVkVfVU5TSUdORURfTE9OR19MT05HIDEKfCAjZGVmaW5lIEhBVkVf SU5UVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX0xJTUlUU19IIDEKfCAjZGVmaW5lIEhBVkVfTE9D QUxFX0ggMQp8ICNkZWZpbmUgSEFWRV9OTF9UWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1REREVG X0ggMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR19IIDEK fCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgSEFWRV9TWVNfUEFSQU1fSCAxCnwg I2RlZmluZSBIQVZFX0ZFT0ZfVU5MT0NLRUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRDX1VOTE9DS0VE IDEKfCAjZGVmaW5lIEhBVkVfR0VUQ1dEIDEKfCAjZGVmaW5lIEhBVkVfR0VURUdJRCAxCnwgI2Rl ZmluZSBIQVZFX0dFVEVVSUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRHSUQgMQp8ICNkZWZpbmUgSEFW RV9HRVRVSUQgMQp8ICNkZWZpbmUgSEFWRV9NVU5NQVAgMQp8ICNkZWZpbmUgSEFWRV9QVVRFTlYg MQp8ICNkZWZpbmUgSEFWRV9TRVRFTlYgMQp8ICNkZWZpbmUgSEFWRV9TRVRMT0NBTEUgMQp8ICNk ZWZpbmUgSEFWRV9TVFBDUFkgMQp8ICNkZWZpbmUgSEFWRV9TVFJDQVNFQ01QIDEKfCAjZGVmaW5l IEhBVkVfU1RSRFVQIDEKfCAjZGVmaW5lIEhBVkVfU1RSVE9VTCAxCnwgI2RlZmluZSBIQVZFX1RT RUFSQ0ggMQp8IC8qIGVuZCBjb25mZGVmcy5oLiAgKi8KfCAjaW5jbHVkZSA8c3RkbGliLmg+Cnwg I2luY2x1ZGUgPGljb252Lmg+CnwgaW50CnwgbWFpbiAoKQp8IHsKfCBpY29udl90IGNkID0gaWNv bnZfb3BlbigiIiwiIik7CnwgICAgICAgIGljb252KGNkLE5VTEwsTlVMTCxOVUxMLE5VTEwpOwp8 ICAgICAgICBpY29udl9jbG9zZShjZCk7CnwgICA7CnwgICByZXR1cm4gMDsKfCB9CmNvbmZpZ3Vy ZToxMTY2MDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3Iv bG9jYWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgIC1saWNvbnYgPiY1CmNv bmZpZ3VyZToxMTY2MzogJD8gPSAwCmNvbmZpZ3VyZToxMTY2NjogdGVzdCAtcyBjb25mdGVzdApj b25maWd1cmU6MTE2Njk6ICQ/ID0gMApjb25maWd1cmU6MTE2ODM6IHJlc3VsdDogeWVzCmNvbmZp Z3VyZToxMTY5MzogY2hlY2tpbmcgaG93IHRvIGxpbmsgd2l0aCBsaWJpY29udgpjb25maWd1cmU6 MTE2OTU6IHJlc3VsdDogLWxpY29udgpjb25maWd1cmU6MTE3MDY6IGNoZWNraW5nIGZvciBpY29u diBkZWNsYXJhdGlvbgpjb25maWd1cmU6MTE3NDE6IGNjIC1jIC1PIC1waXBlIC1tY3B1PXBlbnRp dW1wcm8gLUkvdXNyL2xvY2FsL2luY2x1ZGUgY29uZnRlc3QuYyA+JjUKY29uZmlndXJlOjExNzc4 OiBjb25mbGljdGluZyB0eXBlcyBmb3IgYGxpYmljb252JwovdXNyL2xvY2FsL2luY2x1ZGUvaWNv bnYuaDo4MjogcHJldmlvdXMgZGVjbGFyYXRpb24gb2YgYGxpYmljb252Jwpjb25maWd1cmU6MTE3 NDQ6ICQ/ID0gMQpjb25maWd1cmU6IGZhaWxlZCBwcm9ncmFtIHdhczoKfCAjbGluZSAxMTcxMyAi Y29uZmlndXJlIgp8IC8qIGNvbmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FHRV9OQU1F ICIiCnwgI2RlZmluZSBQQUNLQUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVkVSU0lP TiAiIgp8ICNkZWZpbmUgUEFDS0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfQlVHUkVQ T1JUICIiCnwgI2RlZmluZSBQQUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lPTiAiMC45 LjIyIgp8ICNkZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1RZUEVTX0gg MQp8ICNkZWZpbmUgSEFWRV9TWVNfU1RBVF9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8 ICNkZWZpbmUgSEFWRV9TVFJJTkdfSCAxCnwgI2RlZmluZSBIQVZFX01FTU9SWV9IIDEKfCAjZGVm aW5lIEhBVkVfU1RSSU5HU19IIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSCAxCnwgI2RlZmlu ZSBIQVZFX1NURElOVF9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgU1RE Q19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfRExGQ05fSCAxCnwgI2RlZmluZSBIQVZFX0FMTE9D QSAxCnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8 ICNkZWZpbmUgSEFWRV9HRVRQQUdFU0laRSAxCnwgI2RlZmluZSBIQVZFX01NQVAgMQp8ICNkZWZp bmUgSU5URElWMF9SQUlTRVNfU0lHRlBFIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSF9XSVRI X1VJTlRNQVggMQp8ICNkZWZpbmUgSEFWRV9TVERJTlRfSF9XSVRIX1VJTlRNQVggMQp8ICNkZWZp bmUgSEFWRV9VTlNJR05FRF9MT05HX0xPTkcgMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEK fCAjZGVmaW5lIEhBVkVfTElNSVRTX0ggMQp8ICNkZWZpbmUgSEFWRV9MT0NBTEVfSCAxCnwgI2Rl ZmluZSBIQVZFX05MX1RZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERERUZfSCAxCnwgI2RlZmlu ZSBIQVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HX0ggMQp8ICNkZWZpbmUgSEFW RV9VTklTVERfSCAxCnwgI2RlZmluZSBIQVZFX1NZU19QQVJBTV9IIDEKfCAjZGVmaW5lIEhBVkVf RkVPRl9VTkxPQ0tFRCAxCnwgI2RlZmluZSBIQVZFX0dFVENfVU5MT0NLRUQgMQp8ICNkZWZpbmUg SEFWRV9HRVRDV0QgMQp8ICNkZWZpbmUgSEFWRV9HRVRFR0lEIDEKfCAjZGVmaW5lIEhBVkVfR0VU RVVJRCAxCnwgI2RlZmluZSBIQVZFX0dFVEdJRCAxCnwgI2RlZmluZSBIQVZFX0dFVFVJRCAxCnwg I2RlZmluZSBIQVZFX01VTk1BUCAxCnwgI2RlZmluZSBIQVZFX1BVVEVOViAxCnwgI2RlZmluZSBI QVZFX1NFVEVOViAxCnwgI2RlZmluZSBIQVZFX1NFVExPQ0FMRSAxCnwgI2RlZmluZSBIQVZFX1NU UENQWSAxCnwgI2RlZmluZSBIQVZFX1NUUkNBU0VDTVAgMQp8ICNkZWZpbmUgSEFWRV9TVFJEVVAg MQp8ICNkZWZpbmUgSEFWRV9TVFJUT1VMIDEKfCAjZGVmaW5lIEhBVkVfVFNFQVJDSCAxCnwgI2Rl ZmluZSBIQVZFX0lDT05WIDEKfCAvKiBlbmQgY29uZmRlZnMuaC4gICovCnwgCnwgI2luY2x1ZGUg PHN0ZGxpYi5oPgp8ICNpbmNsdWRlIDxpY29udi5oPgp8IGV4dGVybgp8ICNpZmRlZiBfX2NwbHVz cGx1cwp8ICJDIgp8ICNlbmRpZgp8ICNpZiBkZWZpbmVkKF9fU1REQ19fKSB8fCBkZWZpbmVkKF9f Y3BsdXNwbHVzKQp8IHNpemVfdCBpY29udiAoaWNvbnZfdCBjZCwgY2hhciAqICppbmJ1Ziwgc2l6 ZV90ICppbmJ5dGVzbGVmdCwgY2hhciAqICpvdXRidWYsIHNpemVfdCAqb3V0Ynl0ZXNsZWZ0KTsK fCAjZWxzZQp8IHNpemVfdCBpY29udigpOwp8ICNlbmRpZgp8IAp8IGludAp8IG1haW4gKCkKfCB7 CnwgCnwgICA7CnwgICByZXR1cm4gMDsKfCB9CmNvbmZpZ3VyZToxMTc2NDogcmVzdWx0OiAKICAg ICAgICAgZXh0ZXJuIHNpemVfdCBpY29udiAoaWNvbnZfdCBjZCwgY29uc3QgY2hhciAqICppbmJ1 Ziwgc2l6ZV90ICppbmJ5dGVzbGVmdCwgY2hhciAqICpvdXRidWYsIHNpemVfdCAqb3V0Ynl0ZXNs ZWZ0KTsKY29uZmlndXJlOjExNzc2OiBjaGVja2luZyBmb3IgbmxfbGFuZ2luZm8gYW5kIENPREVT RVQKY29uZmlndXJlOjExNzk4OiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVt cHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAgPiY1 CmNvbmZpZ3VyZToxMTgwMTogJD8gPSAwCmNvbmZpZ3VyZToxMTgwNDogdGVzdCAtcyBjb25mdGVz dApjb25maWd1cmU6MTE4MDc6ICQ/ID0gMApjb25maWd1cmU6MTE4MTk6IHJlc3VsdDogeWVzCmNv bmZpZ3VyZToxMTgzMTogY2hlY2tpbmcgZm9yIExDX01FU1NBR0VTCmNvbmZpZ3VyZToxMTg1Mzog Y2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9jYWwvaW5j bHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQpjb25maWd1cmU6MTE4NTY6ICQ/ ID0gMApjb25maWd1cmU6MTE4NTk6IHRlc3QgLXMgY29uZnRlc3QKY29uZmlndXJlOjExODYyOiAk PyA9IDAKY29uZmlndXJlOjExODczOiByZXN1bHQ6IHllcwpjb25maWd1cmU6MTE4ODk6IGNoZWNr aW5nIGZvciBiaXNvbgpjb25maWd1cmU6MTE5MDU6IGZvdW5kIC91c3IvbG9jYWwvYmluL2Jpc29u CmNvbmZpZ3VyZToxMTkxNTogcmVzdWx0OiBiaXNvbgpjb25maWd1cmU6MTE5Mjg6IGNoZWNraW5n IHZlcnNpb24gb2YgYmlzb24KY29uZmlndXJlOjExOTM3OiByZXN1bHQ6IDEuNzUsIG9rCmNvbmZp Z3VyZToxMTk1ODogY2hlY2tpbmcgd2hldGhlciBOTFMgaXMgcmVxdWVzdGVkCmNvbmZpZ3VyZTox MTk2NzogcmVzdWx0OiB5ZXMKY29uZmlndXJlOjExOTgyOiBjaGVja2luZyB3aGV0aGVyIGluY2x1 ZGVkIGdldHRleHQgaXMgcmVxdWVzdGVkCmNvbmZpZ3VyZToxMTk5MjogcmVzdWx0OiBubwpjb25m aWd1cmU6MTIwMDM6IGNoZWNraW5nIGZvciBHTlUgZ2V0dGV4dCBpbiBsaWJjCmNvbmZpZ3VyZTox MjAyODogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBybyAtSS91c3IvbG9j YWwvaW5jbHVkZSAtTC91c3IvbG9jYWwvbGliIGNvbmZ0ZXN0LmMgID4mNQovdmFyL3RtcC8vY2NU WHdwUEUubzogSW4gZnVuY3Rpb24gYG1haW4nOgovdmFyL3RtcC8vY2NUWHdwUEUubygudGV4dCsw eDE5KTogdW5kZWZpbmVkIHJlZmVyZW5jZSB0byBgbGliaW50bF9iaW5kdGV4dGRvbWFpbicKL3Zh ci90bXAvL2NjVFh3cFBFLm8oLnRleHQrMHgyNSk6IHVuZGVmaW5lZCByZWZlcmVuY2UgdG8gYGxp YmludGxfZ2V0dGV4dCcKL3Zhci90bXAvL2NjVFh3cFBFLm8oLnRleHQrMHgyYik6IHVuZGVmaW5l ZCByZWZlcmVuY2UgdG8gYF9ubF9tc2dfY2F0X2NudHInCi92YXIvdG1wLy9jY1RYd3BQRS5vKC50 ZXh0KzB4MzEpOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBfbmxfZG9tYWluX2JpbmRpbmdzJwpj b25maWd1cmU6MTIwMzE6ICQ/ID0gMQpjb25maWd1cmU6IGZhaWxlZCBwcm9ncmFtIHdhczoKfCAj bGluZSAxMjAwOSAiY29uZmlndXJlIgp8IC8qIGNvbmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUg UEFDS0FHRV9OQU1FICIiCnwgI2RlZmluZSBQQUNLQUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBB Q0tBR0VfVkVSU0lPTiAiIgp8ICNkZWZpbmUgUEFDS0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBB Q0tBR0VfQlVHUkVQT1JUICIiCnwgI2RlZmluZSBQQUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUg VkVSU0lPTiAiMC45LjIyIgp8ICNkZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVf U1lTX1RZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9TWVNfU1RBVF9IIDEKfCAjZGVmaW5lIEhBVkVf U1RETElCX0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJTkdfSCAxCnwgI2RlZmluZSBIQVZFX01FTU9S WV9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HU19IIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNf SCAxCnwgI2RlZmluZSBIQVZFX1NURElOVF9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8 ICNkZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfRExGQ05fSCAxCnwgI2RlZmlu ZSBIQVZFX0FMTE9DQSAxCnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVf VU5JU1REX0ggMQp8ICNkZWZpbmUgSEFWRV9HRVRQQUdFU0laRSAxCnwgI2RlZmluZSBIQVZFX01N QVAgMQp8ICNkZWZpbmUgSU5URElWMF9SQUlTRVNfU0lHRlBFIDEKfCAjZGVmaW5lIEhBVkVfSU5U VFlQRVNfSF9XSVRIX1VJTlRNQVggMQp8ICNkZWZpbmUgSEFWRV9TVERJTlRfSF9XSVRIX1VJTlRN QVggMQp8ICNkZWZpbmUgSEFWRV9VTlNJR05FRF9MT05HX0xPTkcgMQp8ICNkZWZpbmUgSEFWRV9J TlRUWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfTElNSVRTX0ggMQp8ICNkZWZpbmUgSEFWRV9MT0NB TEVfSCAxCnwgI2RlZmluZSBIQVZFX05MX1RZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9TVERERUZf SCAxCnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HX0ggMQp8 ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2RlZmluZSBIQVZFX1NZU19QQVJBTV9IIDEKfCAj ZGVmaW5lIEhBVkVfRkVPRl9VTkxPQ0tFRCAxCnwgI2RlZmluZSBIQVZFX0dFVENfVU5MT0NLRUQg MQp8ICNkZWZpbmUgSEFWRV9HRVRDV0QgMQp8ICNkZWZpbmUgSEFWRV9HRVRFR0lEIDEKfCAjZGVm aW5lIEhBVkVfR0VURVVJRCAxCnwgI2RlZmluZSBIQVZFX0dFVEdJRCAxCnwgI2RlZmluZSBIQVZF X0dFVFVJRCAxCnwgI2RlZmluZSBIQVZFX01VTk1BUCAxCnwgI2RlZmluZSBIQVZFX1BVVEVOViAx CnwgI2RlZmluZSBIQVZFX1NFVEVOViAxCnwgI2RlZmluZSBIQVZFX1NFVExPQ0FMRSAxCnwgI2Rl ZmluZSBIQVZFX1NUUENQWSAxCnwgI2RlZmluZSBIQVZFX1NUUkNBU0VDTVAgMQp8ICNkZWZpbmUg SEFWRV9TVFJEVVAgMQp8ICNkZWZpbmUgSEFWRV9TVFJUT1VMIDEKfCAjZGVmaW5lIEhBVkVfVFNF QVJDSCAxCnwgI2RlZmluZSBIQVZFX0lDT05WIDEKfCAjZGVmaW5lIElDT05WX0NPTlNUIGNvbnN0 CnwgI2RlZmluZSBIQVZFX0xBTkdJTkZPX0NPREVTRVQgMQp8ICNkZWZpbmUgSEFWRV9MQ19NRVNT QUdFUyAxCnwgLyogZW5kIGNvbmZkZWZzLmguICAqLwp8ICNpbmNsdWRlIDxsaWJpbnRsLmg+Cnwg ZXh0ZXJuIGludCBfbmxfbXNnX2NhdF9jbnRyOwp8IGV4dGVybiBpbnQgKl9ubF9kb21haW5fYmlu ZGluZ3M7CnwgaW50CnwgbWFpbiAoKQp8IHsKfCBiaW5kdGV4dGRvbWFpbiAoIiIsICIiKTsKfCBy ZXR1cm4gKGludCkgZ2V0dGV4dCAoIiIpICsgX25sX21zZ19jYXRfY250ciArICpfbmxfZG9tYWlu X2JpbmRpbmdzCnwgICA7CnwgICByZXR1cm4gMDsKfCB9CmNvbmZpZ3VyZToxMjA0ODogcmVzdWx0 OiBubwpjb25maWd1cmU6MTI0MzE6IGNoZWNraW5nIGZvciBHTlUgZ2V0dGV4dCBpbiBsaWJpbnRs CmNvbmZpZ3VyZToxMjQ2NDogY2MgLW8gY29uZnRlc3QgLU8gLXBpcGUgLW1jcHU9cGVudGl1bXBy byAtSS91c3IvbG9jYWwvaW5jbHVkZSAgLUwvdXNyL2xvY2FsL2xpYiBjb25mdGVzdC5jICAtbGlu dGwgPiY1CmNvbmZpZ3VyZToxMjQ2NzogJD8gPSAwCmNvbmZpZ3VyZToxMjQ3MDogdGVzdCAtcyBj b25mdGVzdApjb25maWd1cmU6MTI0NzM6ICQ/ID0gMApjb25maWd1cmU6MTI1MzQ6IHJlc3VsdDog eWVzCmNvbmZpZ3VyZToxMjU4NTogY2hlY2tpbmcgaG93IHRvIGxpbmsgd2l0aCBsaWJpbnRsCmNv bmZpZ3VyZToxMjU4NzogcmVzdWx0OiAtbGludGwKY29uZmlndXJlOjEyNjc5OiBjaGVja2luZyBm b3IgYW4gQU5TSSBDLWNvbmZvcm1pbmcgY29uc3QKY29uZmlndXJlOjEyNzY3OiByZXN1bHQ6IHll cwpjb25maWd1cmU6MTI3Nzc6IGNoZWNraW5nIGZvciBpbmxpbmUKY29uZmlndXJlOjEyODIwOiBy ZXN1bHQ6IGlubGluZQpjb25maWd1cmU6MTI4MzU6IGNoZWNraW5nIGZvciBvZmZfdApjb25maWd1 cmU6MTI4ODA6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMjg5MjogY2hlY2tpbmcgZm9yIHNpemVf dApjb25maWd1cmU6MTI5Mzc6IHJlc3VsdDogeWVzCmNvbmZpZ3VyZToxMjk5NzogY2hlY2tpbmcg Zm9yIHhpbmUtY29uZmlnCmNvbmZpZ3VyZToxMzAxNTogZm91bmQgL3Vzci9sb2NhbC9iaW4veGlu ZS1jb25maWcKY29uZmlndXJlOjEzMDI4OiByZXN1bHQ6IC91c3IvbG9jYWwvYmluL3hpbmUtY29u ZmlnCmNvbmZpZ3VyZToxMzAzNTogY2hlY2tpbmcgZm9yIFhJTkUtTElCIHZlcnNpb24gPj0gMS4w LjAKY29uZmlndXJlOjEzMTQ1OiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNwdT1wZW50aXVt cHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1EX1RIUkVBRF9T QUZFIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRlc3QuYyAtTC91 c3IvbG9jYWwvbGliIC1seGluZSAtbHogLUwvdXNyL2xvY2FsL2xpYiAtcHRocmVhZCAtTC91c3Iv WDExUjYvbGliIC1ML3Vzci9YMTFSNi9saWIgLWxYdiAtbFhleHQgID4mNQovdXNyL2xvY2FsL2xp Yi9saWJ4aW5lLnNvOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBsaWJpbnRsX2JpbmR0ZXh0ZG9t YWluJwovdXNyL2xvY2FsL2xpYi9saWJ4aW5lLnNvOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBs aWJpbnRsX2RnZXR0ZXh0Jwpjb25maWd1cmU6MTMxNDg6ICQ/ID0gMQpjb25maWd1cmU6IHByb2dy YW0gZXhpdGVkIHdpdGggc3RhdHVzIDEKY29uZmlndXJlOiBmYWlsZWQgcHJvZ3JhbSB3YXM6Cnwg I2xpbmUgMTMwNzEgImNvbmZpZ3VyZSIKfCAvKiBjb25mZGVmcy5oLiAgKi8KfCAKfCAjZGVmaW5l IFBBQ0tBR0VfTkFNRSAiIgp8ICNkZWZpbmUgUEFDS0FHRV9UQVJOQU1FICIiCnwgI2RlZmluZSBQ QUNLQUdFX1ZFUlNJT04gIiIKfCAjZGVmaW5lIFBBQ0tBR0VfU1RSSU5HICIiCnwgI2RlZmluZSBQ QUNLQUdFX0JVR1JFUE9SVCAiIgp8ICNkZWZpbmUgUEFDS0FHRSAieGluZS11aSIKfCAjZGVmaW5l IFZFUlNJT04gIjAuOS4yMiIKfCAjZGVmaW5lIFNURENfSEVBREVSUyAxCnwgI2RlZmluZSBIQVZF X1NZU19UWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1NUQVRfSCAxCnwgI2RlZmluZSBIQVZF X1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HX0ggMQp8ICNkZWZpbmUgSEFWRV9NRU1P UllfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR1NfSCAxCnwgI2RlZmluZSBIQVZFX0lOVFRZUEVT X0ggMQp8ICNkZWZpbmUgSEFWRV9TVERJTlRfSCAxCnwgI2RlZmluZSBIQVZFX1VOSVNURF9IIDEK fCAjZGVmaW5lIFNURENfSEVBREVSUyAxCnwgI2RlZmluZSBIQVZFX0RMRkNOX0ggMQp8ICNkZWZp bmUgSEFWRV9BTExPQ0EgMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZF X1VOSVNURF9IIDEKfCAjZGVmaW5lIEhBVkVfR0VUUEFHRVNJWkUgMQp8ICNkZWZpbmUgSEFWRV9N TUFQIDEKfCAjZGVmaW5lIElOVERJVjBfUkFJU0VTX1NJR0ZQRSAxCnwgI2RlZmluZSBIQVZFX0lO VFRZUEVTX0hfV0lUSF9VSU5UTUFYIDEKfCAjZGVmaW5lIEhBVkVfU1RESU5UX0hfV0lUSF9VSU5U TUFYIDEKfCAjZGVmaW5lIEhBVkVfVU5TSUdORURfTE9OR19MT05HIDEKfCAjZGVmaW5lIEhBVkVf SU5UVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX0xJTUlUU19IIDEKfCAjZGVmaW5lIEhBVkVfTE9D QUxFX0ggMQp8ICNkZWZpbmUgSEFWRV9OTF9UWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfU1REREVG X0ggMQp8ICNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCnwgI2RlZmluZSBIQVZFX1NUUklOR19IIDEK fCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgSEFWRV9TWVNfUEFSQU1fSCAxCnwg I2RlZmluZSBIQVZFX0ZFT0ZfVU5MT0NLRUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRDX1VOTE9DS0VE IDEKfCAjZGVmaW5lIEhBVkVfR0VUQ1dEIDEKfCAjZGVmaW5lIEhBVkVfR0VURUdJRCAxCnwgI2Rl ZmluZSBIQVZFX0dFVEVVSUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRHSUQgMQp8ICNkZWZpbmUgSEFW RV9HRVRVSUQgMQp8ICNkZWZpbmUgSEFWRV9NVU5NQVAgMQp8ICNkZWZpbmUgSEFWRV9QVVRFTlYg MQp8ICNkZWZpbmUgSEFWRV9TRVRFTlYgMQp8ICNkZWZpbmUgSEFWRV9TRVRMT0NBTEUgMQp8ICNk ZWZpbmUgSEFWRV9TVFBDUFkgMQp8ICNkZWZpbmUgSEFWRV9TVFJDQVNFQ01QIDEKfCAjZGVmaW5l IEhBVkVfU1RSRFVQIDEKfCAjZGVmaW5lIEhBVkVfU1RSVE9VTCAxCnwgI2RlZmluZSBIQVZFX1RT RUFSQ0ggMQp8ICNkZWZpbmUgSEFWRV9JQ09OViAxCnwgI2RlZmluZSBJQ09OVl9DT05TVCBjb25z dAp8ICNkZWZpbmUgSEFWRV9MQU5HSU5GT19DT0RFU0VUIDEKfCAjZGVmaW5lIEhBVkVfTENfTUVT U0FHRVMgMQp8ICNkZWZpbmUgRU5BQkxFX05MUyAxCnwgI2RlZmluZSBIQVZFX0dFVFRFWFQgMQp8 ICNkZWZpbmUgSEFWRV9EQ0dFVFRFWFQgMQp8IC8qIGVuZCBjb25mZGVmcy5oLiAgKi8KfCAKfCAj aW5jbHVkZSA8eGluZS5oPgp8ICNpbmNsdWRlIDxzdGRpby5oPgp8ICNpbmNsdWRlIDxzdGRsaWIu aD4KfCAjaW5jbHVkZSA8c3RyaW5nLmg+CnwgCnwgaW50CnwgbWFpbiAoKQp8IHsKfCAgIGludCBt YWpvciwgbWlub3IsIHN1YjsKfCAgICBjaGFyICp0bXBfdmVyc2lvbjsKfCAKfCAgIHN5c3RlbSAo InRvdWNoIGNvbmYueGluZXRlc3QiKTsKfCAKfCAgIC8qIEhQL1VYIDkgKCVAIyEpIHdyaXRlcyB0 byBzc2NhbmYgc3RyaW5ncyAqLwp8ICAgdG1wX3ZlcnNpb24gPSAoY2hhciAqKSBzdHJkdXAoIjEu MC4wIik7CnwgICBpZiAoc3NjYW5mKHRtcF92ZXJzaW9uLCAiJWQuJWQuJWQiLCAmbWFqb3IsICZt aW5vciwgJnN1YikgIT0gMykgewp8ICAgICAgcHJpbnRmKCIlcywgYmFkIHZlcnNpb24gc3RyaW5n XG4iLCAiMS4wLjAiKTsKfCAgICAgIGV4aXQoMSk7CnwgICAgfQp8IAp8ICAgaWYgKChYSU5FX01B Sk9SX1ZFUlNJT04gIT0gMSkgfHwKfCAgICAgICAoWElORV9NSU5PUl9WRVJTSU9OICE9IDApIHx8 CnwgICAgICAgKFhJTkVfU1VCX1ZFUlNJT04gIT0gMCkpCnwgICAgIHsKfCAgICAgICBwcmludGYo IlxuKioqICd4aW5lLWNvbmZpZyAtLXZlcnNpb24nIHJldHVybmVkICVkLiVkLiVkLCBidXQgWElO RSAoJWQuJWQuJWQpXG4iLAp8ICAgICAgICAgICAgICAxLCAwLCAwLAp8ICAgICAgICAgICAgICBY SU5FX01BSk9SX1ZFUlNJT04sIFhJTkVfTUlOT1JfVkVSU0lPTiwgWElORV9TVUJfVkVSU0lPTik7 CnwgICAgICAgcHJpbnRmICgiKioqIHdhcyBmb3VuZCEgSWYgeGluZS1jb25maWcgd2FzIGNvcnJl Y3QsIHRoZW4gaXQgaXMgYmVzdFxuIik7CnwgICAgICAgcHJpbnRmICgiKioqIHRvIHJlbW92ZSB0 aGUgb2xkIHZlcnNpb24gb2YgWElORS4gWW91IG1heSBhbHNvIGJlIGFibGUgdG8gZml4IHRoZSBl cnJvclxuIik7CnwgICAgICAgcHJpbnRmKCIqKiogYnkgbW9kaWZ5aW5nIHlvdXIgTERfTElCUkFS WV9QQVRIIGVudmlyb21lbnQgdmFyaWFibGUsIG9yIGJ5IGVkaXRpbmdcbiIpOwp8ICAgICAgIHBy aW50ZigiKioqIC9ldGMvbGQuc28uY29uZi4gTWFrZSBzdXJlIHlvdSBoYXZlIHJ1biBsZGNvbmZp ZyBpZiB0aGF0IGlzXG4iKTsKfCAgICAgICBwcmludGYoIioqKiByZXF1aXJlZCBvbiB5b3VyIHN5 c3RlbS5cbiIpOwp8ICAgICAgIHByaW50ZigiKioqIElmIHhpbmUtY29uZmlnIHdhcyB3cm9uZywg c2V0IHRoZSBlbnZpcm9ubWVudCB2YXJpYWJsZSBYSU5FX0NPTkZJR1xuIik7CnwgICAgICAgcHJp bnRmKCIqKiogdG8gcG9pbnQgdG8gdGhlIGNvcnJlY3QgY29weSBvZiB4aW5lLWNvbmZpZywgYW5k IHJlbW92ZSB0aGUgZmlsZSBjb25maWcuY2FjaGVcbiIpOwp8ICAgICAgIHByaW50ZigiKioqIGJl Zm9yZSByZS1ydW5uaW5nIGNvbmZpZ3VyZVxuIik7CnwgICAgIH0KfCAgIGVsc2UKfCAgICAgewp8 ICAgICAgIGlmICgoWElORV9NQUpPUl9WRVJTSU9OID4gbWFqb3IpIHx8CnwgICAgICAgICAoKFhJ TkVfTUFKT1JfVkVSU0lPTiA9PSBtYWpvcikgJiYgKFhJTkVfTUlOT1JfVkVSU0lPTiA+IG1pbm9y KSkgfHwKfCAgICAgICAgICgoWElORV9NQUpPUl9WRVJTSU9OID09IG1ham9yKSAmJiAoWElORV9N SU5PUl9WRVJTSU9OID09IG1pbm9yKSAmJiAoWElORV9TVUJfVkVSU0lPTiA+PSBzdWIpKSkKfCAg ICAgICB7CnwgICAgICAgICByZXR1cm4gMDsKfCAgICAgICAgfQp8ICAgICAgZWxzZQp8ICAgICAg IHsKfCAgICAgICAgIHByaW50ZigiXG4qKiogQW4gb2xkIHZlcnNpb24gb2YgWElORSAoJWQuJWQu JWQpIHdhcyBmb3VuZC5cbiIsCnwgICAgICAgICAgICAgICAgWElORV9NQUpPUl9WRVJTSU9OLCBY SU5FX01JTk9SX1ZFUlNJT04sIFhJTkVfU1VCX1ZFUlNJT04pOwp8ICAgICAgICAgcHJpbnRmKCIq KiogWW91IG5lZWQgYSB2ZXJzaW9uIG9mIFhJTkUgbmV3ZXIgdGhhbiAlZC4lZC4lZC4gVGhlIGxh dGVzdCB2ZXJzaW9uIG9mXG4iLAp8IAkgICAgICAgbWFqb3IsIG1pbm9yLCBzdWIpOwp8ICAgICAg ICAgcHJpbnRmKCIqKiogWElORSBpcyBhbHdheXMgYXZhaWxhYmxlIGZyb206XG4iKTsKfCAgICAg ICAgIHByaW50ZigiKioqICAgICAgICBodHRwOi8veGluZS5zb3VyY2Vmb3JnZS5uZXRcbiIpOwp8 ICAgICAgICAgcHJpbnRmKCIqKipcbiIpOwp8ICAgICAgICAgcHJpbnRmKCIqKiogSWYgeW91IGhh dmUgYWxyZWFkeSBpbnN0YWxsZWQgYSBzdWZmaWNpZW50bHkgbmV3IHZlcnNpb24sIHRoaXMgZXJy b3JcbiIpOwp8ICAgICAgICAgcHJpbnRmKCIqKiogcHJvYmFibHkgbWVhbnMgdGhhdCB0aGUgd3Jv bmcgY29weSBvZiB0aGUgeGluZS1jb25maWcgc2hlbGwgc2NyaXB0IGlzXG4iKTsKfCAgICAgICAg IHByaW50ZigiKioqIGJlaW5nIGZvdW5kLiBUaGUgZWFzaWVzdCB3YXkgdG8gZml4IHRoaXMgaXMg dG8gcmVtb3ZlIHRoZSBvbGQgdmVyc2lvblxuIik7CnwgICAgICAgICBwcmludGYoIioqKiBvZiBY SU5FLCBidXQgeW91IGNhbiBhbHNvIHNldCB0aGUgWElORV9DT05GSUcgZW52aXJvbm1lbnQgdG8g cG9pbnQgdG8gdGhlXG4iKTsKfCAgICAgICAgIHByaW50ZigiKioqIGNvcnJlY3QgY29weSBvZiB4 aW5lLWNvbmZpZy4gKEluIHRoaXMgY2FzZSwgeW91IHdpbGwgaGF2ZSB0b1xuIik7CnwgICAgICAg ICBwcmludGYoIioqKiBtb2RpZnkgeW91ciBMRF9MSUJSQVJZX1BBVEggZW52aXJvbWVudCB2YXJp YWJsZSwgb3IgZWRpdCAvZXRjL2xkLnNvLmNvbmZcbiIpOwp8ICAgICAgICAgcHJpbnRmKCIqKiog c28gdGhhdCB0aGUgY29ycmVjdCBsaWJyYXJpZXMgYXJlIGZvdW5kIGF0IHJ1bi10aW1lKSlcbiIp Owp8ICAgICAgIH0KfCAgICAgfQp8ICAgcmV0dXJuIDE7CnwgfQp8IApjb25maWd1cmU6MTMxNzU6 IHJlc3VsdDogbm8KY29uZmlndXJlOjEzMjA5OiBjYyAtbyBjb25mdGVzdCAtTyAtcGlwZSAtbWNw dT1wZW50aXVtcHJvIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1E X1RIUkVBRF9TQUZFIC1JL3Vzci9sb2NhbC9pbmNsdWRlIC1ML3Vzci9sb2NhbC9saWIgY29uZnRl c3QuYyAgLUwvdXNyL2xvY2FsL2xpYiAtbHhpbmUgLWx6IC1ML3Vzci9sb2NhbC9saWIgLXB0aHJl YWQgLUwvdXNyL1gxMVI2L2xpYiAtTC91c3IvWDExUjYvbGliIC1sWHYgLWxYZXh0ID4mNQovdXNy L2xvY2FsL2xpYi9saWJ4aW5lLnNvOiB1bmRlZmluZWQgcmVmZXJlbmNlIHRvIGBsaWJpbnRsX2Jp bmR0ZXh0ZG9tYWluJwovdXNyL2xvY2FsL2xpYi9saWJ4aW5lLnNvOiB1bmRlZmluZWQgcmVmZXJl bmNlIHRvIGBsaWJpbnRsX2RnZXR0ZXh0Jwpjb25maWd1cmU6MTMyMTI6ICQ/ID0gMQpjb25maWd1 cmU6IGZhaWxlZCBwcm9ncmFtIHdhczoKfCAjbGluZSAxMzE5MCAiY29uZmlndXJlIgp8IC8qIGNv bmZkZWZzLmguICAqLwp8IAp8ICNkZWZpbmUgUEFDS0FHRV9OQU1FICIiCnwgI2RlZmluZSBQQUNL QUdFX1RBUk5BTUUgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfVkVSU0lPTiAiIgp8ICNkZWZpbmUgUEFD S0FHRV9TVFJJTkcgIiIKfCAjZGVmaW5lIFBBQ0tBR0VfQlVHUkVQT1JUICIiCnwgI2RlZmluZSBQ QUNLQUdFICJ4aW5lLXVpIgp8ICNkZWZpbmUgVkVSU0lPTiAiMC45LjIyIgp8ICNkZWZpbmUgU1RE Q19IRUFERVJTIDEKfCAjZGVmaW5lIEhBVkVfU1lTX1RZUEVTX0ggMQp8ICNkZWZpbmUgSEFWRV9T WVNfU1RBVF9IIDEKfCAjZGVmaW5lIEhBVkVfU1RETElCX0ggMQp8ICNkZWZpbmUgSEFWRV9TVFJJ TkdfSCAxCnwgI2RlZmluZSBIQVZFX01FTU9SWV9IIDEKfCAjZGVmaW5lIEhBVkVfU1RSSU5HU19I IDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSCAxCnwgI2RlZmluZSBIQVZFX1NURElOVF9IIDEK fCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgU1REQ19IRUFERVJTIDEKfCAjZGVm aW5lIEhBVkVfRExGQ05fSCAxCnwgI2RlZmluZSBIQVZFX0FMTE9DQSAxCnwgI2RlZmluZSBIQVZF X1NURExJQl9IIDEKfCAjZGVmaW5lIEhBVkVfVU5JU1REX0ggMQp8ICNkZWZpbmUgSEFWRV9HRVRQ QUdFU0laRSAxCnwgI2RlZmluZSBIQVZFX01NQVAgMQp8ICNkZWZpbmUgSU5URElWMF9SQUlTRVNf U0lHRlBFIDEKfCAjZGVmaW5lIEhBVkVfSU5UVFlQRVNfSF9XSVRIX1VJTlRNQVggMQp8ICNkZWZp bmUgSEFWRV9TVERJTlRfSF9XSVRIX1VJTlRNQVggMQp8ICNkZWZpbmUgSEFWRV9VTlNJR05FRF9M T05HX0xPTkcgMQp8ICNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKfCAjZGVmaW5lIEhBVkVfTElN SVRTX0ggMQp8ICNkZWZpbmUgSEFWRV9MT0NBTEVfSCAxCnwgI2RlZmluZSBIQVZFX05MX1RZUEVT X0ggMQp8ICNkZWZpbmUgSEFWRV9TVERERUZfSCAxCnwgI2RlZmluZSBIQVZFX1NURExJQl9IIDEK fCAjZGVmaW5lIEhBVkVfU1RSSU5HX0ggMQp8ICNkZWZpbmUgSEFWRV9VTklTVERfSCAxCnwgI2Rl ZmluZSBIQVZFX1NZU19QQVJBTV9IIDEKfCAjZGVmaW5lIEhBVkVfRkVPRl9VTkxPQ0tFRCAxCnwg I2RlZmluZSBIQVZFX0dFVENfVU5MT0NLRUQgMQp8ICNkZWZpbmUgSEFWRV9HRVRDV0QgMQp8ICNk ZWZpbmUgSEFWRV9HRVRFR0lEIDEKfCAjZGVmaW5lIEhBVkVfR0VURVVJRCAxCnwgI2RlZmluZSBI QVZFX0dFVEdJRCAxCnwgI2RlZmluZSBIQVZFX0dFVFVJRCAxCnwgI2RlZmluZSBIQVZFX01VTk1B UCAxCnwgI2RlZmluZSBIQVZFX1BVVEVOViAxCnwgI2RlZmluZSBIQVZFX1NFVEVOViAxCnwgI2Rl ZmluZSBIQVZFX1NFVExPQ0FMRSAxCnwgI2RlZmluZSBIQVZFX1NUUENQWSAxCnwgI2RlZmluZSBI QVZFX1NUUkNBU0VDTVAgMQp8ICNkZWZpbmUgSEFWRV9TVFJEVVAgMQp8ICNkZWZpbmUgSEFWRV9T VFJUT1VMIDEKfCAjZGVmaW5lIEhBVkVfVFNFQVJDSCAxCnwgI2RlZmluZSBIQVZFX0lDT05WIDEK fCAjZGVmaW5lIElDT05WX0NPTlNUIGNvbnN0CnwgI2RlZmluZSBIQVZFX0xBTkdJTkZPX0NPREVT RVQgMQp8ICNkZWZpbmUgSEFWRV9MQ19NRVNTQUdFUyAxCnwgI2RlZmluZSBFTkFCTEVfTkxTIDEK fCAjZGVmaW5lIEhBVkVfR0VUVEVYVCAxCnwgI2RlZmluZSBIQVZFX0RDR0VUVEVYVCAxCnwgLyog ZW5kIGNvbmZkZWZzLmguICAqLwp8IAp8ICNpbmNsdWRlIDx4aW5lLmg+CnwgI2luY2x1ZGUgPHN0 ZGlvLmg+CnwgCnwgaW50CnwgbWFpbiAoKQp8IHsKfCAgcmV0dXJuICgoWElORV9NQUpPUl9WRVJT SU9OKSB8fCAoWElORV9NSU5PUl9WRVJTSU9OKSB8fCAoWElORV9TVUJfVkVSU0lPTikpOwp8ICAg Owp8ICAgcmV0dXJuIDA7CnwgfQpjb25maWd1cmU6MTMyNDY6IGVycm9yOiAqKiogWW91IHNob3Vs ZCBpbnN0YWxsIHhpbmUtbGliIGZpcnN0ICoqKgoKIyMgLS0tLS0tLS0tLS0tLS0tLSAjIwojIyBD YWNoZSB2YXJpYWJsZXMuICMjCiMjIC0tLS0tLS0tLS0tLS0tLS0gIyMKCmFjX2N2X3R5cGVfc2l6 ZV90PXllcwphbV9jdl9DQ19kZXBlbmRlbmNpZXNfY29tcGlsZXJfdHlwZT1nY2MzCmFjX2N2X2Z1 bmNfZ2V0Y3dkPXllcwphY19jdl9wYXRoX1hHRVRURVhUPS91c3IvbG9jYWwvYmluL3hnZXR0ZXh0 CmFjX2N2X3BhdGhfTVNHTUVSR0U9L3Vzci9sb2NhbC9iaW4vbXNnbWVyZ2UKYW1fY3ZfcHJvdG9f aWNvbnZfYXJnMT1jb25zdApndF9jdl9pbnR0eXBlc19wcmlfYnJva2VuPW5vCmx0X2N2X2ZpbGVf bWFnaWNfY21kPSckTUFHSUNfQ01EJwphY19jdl9oZWFkZXJfc3RkbGliX2g9eWVzCmFjX2N2X2Z1 bmNfc3RydG91bD15ZXMKYWNfY3ZfZnVuY19nZXR1aWQ9eWVzCmFjX2N2X2hlYWRlcl9ubF90eXBl c19oPXllcwphY19jdl9saWJfY3Bvc2l4X3N0cmVycm9yPW5vCmFjX2N2X3Byb2dfY2NfZz15ZXMK YWNfY3ZfZW52X0xERkxBR1Nfc2V0PXNldAphY2xfY3ZfcGF0aF9MRD0vdXNyL2Jpbi9sZApsdF9j dl9wcm9nX2NjX2Nhbl9idWlsZF9zaGFyZWQ9eWVzCmFjX2N2X2NfY29tcGlsZXJfZ251PXllcwph Y19jdl9leGVleHQ9CmFjX2N2X2Vudl9DRkxBR1Nfc2V0PXNldAphY19jdl9mdW5jX3NldGxvY2Fs ZT15ZXMKZ3RfY3ZfZnVuY19nbnVnZXR0ZXh0MV9saWJjPW5vCmFjX2N2X2Z1bmNfbW1hcF9maXhl ZF9tYXBwZWQ9eWVzCmFjX2N2X2Z1bmNfbWVtcGNweT1ubwpqbV9hY19jdl9oZWFkZXJfc3RkaW50 X2g9eWVzCmptX2FjX2N2X2hlYWRlcl9pbnR0eXBlc19oPXllcwphY19jdl9wcm9nX21ha2VfZ21h a2Vfc2V0PXllcwphY19jdl9wYXRoX1hJTkVfQ09ORklHPS91c3IvbG9jYWwvYmluL3hpbmUtY29u ZmlnCmFjX2N2X2Vudl9DUFBfdmFsdWU9CmFjX2N2X2Vudl9DUFBGTEFHU19zZXQ9c2V0CmFjX2N2 X2Z1bmNfc3RyY2FzZWNtcD15ZXMKbHRfY3ZfcHJvZ19jY19zdGF0aWNfd29ya3M9eWVzCmx0X2N2 X3Byb2dfY2Nfbm9fYnVpbHRpbj0KYWNfY3ZfaGVhZGVyX21pbml4X2NvbmZpZ19oPW5vCmx0X2N2 X3Byb2dfY2Nfc2hsaWI9CmFtX2N2X3Byb3RvX2ljb252PSdleHRlcm4gc2l6ZV90IGljb252IChp Y29udl90IGNkLCBjb25zdCBjaGFyICogKmluYnVmLCBzaXplX3QgKmluYnl0ZXNsZWZ0LCBjaGFy ICogKm91dGJ1Ziwgc2l6ZV90ICpvdXRieXRlc2xlZnQpOycKYWNfY3ZfZnVuY19fX2FyZ3pfY291 bnQ9bm8KYWNfY3ZfdHlwZV91bnNpZ25lZF9sb25nX2xvbmc9eWVzCmx0X2N2X3Byb2dfY2Nfc3Rh dGljPS1zdGF0aWMKYWNfY3ZfZW52X2hvc3RfYWxpYXNfc2V0PXNldAphY19jdl9mdW5jX2dldGVn aWQ9eWVzCmFjX2N2X2NfY29uc3Q9eWVzCmFjX2N2X3BhdGhfR01TR0ZNVD0vdXNyL2xvY2FsL2Jp bi9tc2dmbXQKbHRfY3ZfbGRfcmVsb2FkX2ZsYWc9LXIKZ3RfY3ZfaW50X2RpdmJ5emVyb19zaWdm cGU9eWVzCmFjX2N2X3dvcmtpbmdfYWxsb2NhX2g9bm8KYWNfY3ZfcHJvZ19DQz1jYwphY19jdl9m dW5jX211bm1hcD15ZXMKbHRfY3ZfYXJjaGl2ZV9jbWRzX25lZWRfbGM9eWVzCmx0X2N2X3Byb2df Z251X2xkPXllcwphY19jdl9oZWFkZXJfc3lzX3N0YXRfaD15ZXMKYWNfY3ZfZW52X2J1aWxkX2Fs aWFzX3NldD1zZXQKYWNfY3ZfaGVhZGVyX2xpbWl0c19oPXllcwphY19jdl9lbnZfTERGTEFHU192 YWx1ZT0tTC91c3IvbG9jYWwvbGliCmFjX2N2X2Vudl90YXJnZXRfYWxpYXNfc2V0PXNldAphY19j dl9mdW5jX2FsbG9jYV93b3Jrcz15ZXMKYWNfY3ZfcHJvZ19jY19zdGRjPQphY19jdl9ob3N0X2Fs aWFzPWkzODYtcG9ydGJsZC1mcmVlYnNkNS4xCmFjX2N2X2Vudl9DRkxBR1NfdmFsdWU9Jy1PIC1w aXBlIC1tY3B1PXBlbnRpdW1wcm8nCmFjX2N2X2Vudl9DQ19zZXQ9c2V0CmFjX2N2X3BhdGhfTVNH Rk1UPS91c3IvbG9jYWwvYmluL21zZ2ZtdApsdF9jdl9wcm9nX2NjX3dsPS1XbCwKYWNfY3ZfaGVh ZGVyX3N5c190eXBlc19oPXllcwphY19jdl9oZWFkZXJfc3RkYz15ZXMKYWNfY3ZfZnVuY19fX2Fy Z3pfc3RyaW5naWZ5PW5vCmx0X2N2X3BhdGhfU0VEPS91c3IvYmluL3NlZAphY19jdl9oZWFkZXJf c3RyaW5nc19oPXllcwphY19jdl9oZWFkZXJfc3RkaW50X2g9eWVzCmFjX2N2X2hlYWRlcl9pbnR0 eXBlc19oPXllcwphY19jdl9wcm9nX2VncmVwPSdncmVwIC1FJwpubHNfY3ZfaGVhZGVyX2ludGw9 CmFjX2N2X2Z1bmNfX19hcmd6X25leHQ9bm8KYWNfY3ZfZnVuY19zZXRlbnY9eWVzCmFjX2N2X2hl YWRlcl9zeXNfcGFyYW1faD15ZXMKYWNfY3ZfaGVhZGVyX2xvY2FsZV9oPXllcwphY19jdl9jX2lu bGluZT1pbmxpbmUKbHRfY3ZfZ2xvYmFsX3N5bWJvbF90b19jZGVjbD0nc2VkIC1uIC1lICdcJydz L14uIC4qIFwoLipcKSQvZXh0ZXJuIGNoYXIgXDE7L3AnXCcnJwpsdF9jdl9wYXRoX0xEPS91c3Iv YmluL2xkCmFjX2N2X2hlYWRlcl91bmlzdGRfaD15ZXMKYWNfY3ZfaGVhZGVyX3N0cmluZ19oPXll cwphY19jdl9idWlsZF9hbGlhcz1pMzg2LXBvcnRibGQtZnJlZWJzZDUuMQphY19jdl9lbnZfQ1BQ RkxBR1NfdmFsdWU9LUkvdXNyL2xvY2FsL2luY2x1ZGUKYWNfY3ZfZnVuY19mZW9mX3VubG9ja2Vk PXllcwpndF9jdl9oZWFkZXJfaW50dHlwZXNfaD15ZXMKYWNfY3ZfcHJvZ19JTlRMQklTT049Ymlz b24KYWNfY3ZfcHJvZ19hY19jdF9SQU5MSUI9cmFubGliCmFjX2N2X2hlYWRlcl9tZW1vcnlfaD15 ZXMKYWNfY3ZfdGFyZ2V0X2FsaWFzPWkzODYtcG9ydGJsZC1mcmVlYnNkNS4xCmFtX2N2X2xhbmdp bmZvX2NvZGVzZXQ9eWVzCmFjX2N2X3Byb2dfYWNfY3RfU1RSSVA9c3RyaXAKYWNfY3ZfaG9zdD1p Mzg2LXBvcnRibGQtZnJlZWJzZDUuMQphY19jdl9lbnZfaG9zdF9hbGlhc192YWx1ZT1pMzg2LXBv cnRibGQtZnJlZWJzZDUuMQphbV9jdl92YWxfTENfTUVTU0FHRVM9eWVzCmFjX2N2X2Z1bmNfZ2V0 ZXVpZD15ZXMKYWNfY3ZfZnVuY19nZXRjX3VubG9ja2VkPXllcwphY19jdl90eXBlX29mZl90PXll cwpubHNfY3ZfZm9yY2VfdXNlX2dudV9nZXR0ZXh0PW5vCmFjX2N2X2Z1bmNfZmdldHNfdW5sb2Nr ZWQ9bm8KbHRfY3ZfZ2xvYmFsX3N5bWJvbF90b19jX25hbWVfYWRkcmVzcz0nc2VkIC1uIC1lICdc JydzL146IFwoW14gXSpcKSAkLyAge1wiXDFcIiwgKGx0X3B0cikgMH0sL3AnXCcnIC1lICdcJydz L15bQkNERUdSU1RdIFwoW14gXSpcKSBcKFteIF0qXCkkLyAgeyJcMiIsIChsdF9wdHIpIFwmXDJ9 LC9wJ1wnJycKYWNfY3ZfZnVuY19nZXRnaWQ9eWVzCmx0X2N2X2NvbXBpbGVyX2Nfbz15ZXMKbHRf Y3ZfcHJvZ19jY19waWNfd29ya3M9eWVzCmx0X2N2X2ZpbGVfbWFnaWNfdGVzdF9maWxlPQpubHNf Y3ZfdXNlX2dudV9nZXR0ZXh0PW5vCmFjX2N2X2Z1bmNfdHNlYXJjaD15ZXMKYWNfY3ZfaGVhZGVy X2FyZ3pfaD1ubwphY19jdl9wcm9nX0NQUD0nY2MgLUUnCmFjX2N2X3Byb2dfQVdLPW5hd2sKYWNf Y3ZfYnVpbGQ9aTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEKYWNfY3ZfZW52X2J1aWxkX2FsaWFzX3Zh bHVlPWkzODYtcG9ydGJsZC1mcmVlYnNkNS4xCmFjX2N2X2hlYWRlcl9tYWxsb2NfaD1ubwphY19j dl9mdW5jX2dldHBhZ2VzaXplPXllcwpsdF9jdl9wcm9nX2NjX3BpYz0nIC1mUElDJwpsdF9jdl9z eXNfZ2xvYmFsX3N5bWJvbF9waXBlPSdzZWQgLW4gLWUgJ1wnJ3MvXi4qWyAJXVwoW0FCQ0RHSVNU V11bQUJDREdJU1RXXSpcKVsgCV1bIAldKlwoXClcKFtfQS1aYS16XVtfQS1aYS16MC05XSpcKSQv XDEgXDJcMyBcMy9wJ1wnJycKbHRfY3ZfZGVwbGlic19jaGVja19tZXRob2Q9cGFzc19hbGwKYW1f Y3ZfbGliX2ljb252PXllcwphbV9jdl9mdW5jX2ljb252PXllcwpsdF9jdl9jb21waWxlcl9vX2xv PXllcwphY19jdl90YXJnZXQ9aTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEKYWNfY3ZfZW52X3Rhcmdl dF9hbGlhc192YWx1ZT1pMzg2LXBvcnRibGQtZnJlZWJzZDUuMQphY19jdl9oZWFkZXJfc3RkZGVm X2g9eWVzCmFjX2N2X2Vudl9DQ192YWx1ZT1jYwpsdF9jdl9wYXRoX05NPW5tCmFjX2N2X2Vudl9D UFBfc2V0PQpndF9jdl9mdW5jX2dudWdldHRleHQxX2xpYmludGw9eWVzCmFjX2N2X2hlYWRlcl9k bGZjbl9oPXllcwpubHNfY3ZfaGVhZGVyX2xpYmd0PQphY19jdl9mdW5jX3N0cmR1cD15ZXMKYWNf Y3ZfZnVuY19wdXRlbnY9eWVzCmFjbF9jdl9ycGF0aD1kb25lCmFjX2N2X2Z1bmNfc3RwY3B5PXll cwphY2xfY3ZfcHJvZ19nbnVfbGQ9eWVzCmFjX2N2X2dudV9saWJyYXJ5XzJfMT1ubwphY19jdl9v YmpleHQ9bwoKIyMgLS0tLS0tLS0tLS0tLS0tLS0gIyMKIyMgT3V0cHV0IHZhcmlhYmxlcy4gIyMK IyMgLS0tLS0tLS0tLS0tLS0tLS0gIyMKCkFBSU5GTz0nJwpBQUxJQl9DRkxBR1M9JycKQUFMSUJf Q09ORklHPScnCkFBTElCX0xJQlM9JycKQUNMT0NBTD0nJHtTSEVMTH0gL3Vzci9ob21lL2ZpbGVf c2VydmVyL0ZyZWVCU0QveGluZS93b3JrL3hpbmUtdWktMC45LjIyL21pc3NpbmcgLS1ydW4gYWNs b2NhbC0xLjYnCkFMTE9DQT0nJwpBTURFUEJBQ0tTTEFTSD0nXCcKQU1ERVBfRkFMU0U9JyMnCkFN REVQX1RSVUU9JycKQU1UQVI9JyR7U0hFTEx9IC91c3IvaG9tZS9maWxlX3NlcnZlci9GcmVlQlNE L3hpbmUvd29yay94aW5lLXVpLTAuOS4yMi9taXNzaW5nIC0tcnVuIHRhcicKQVVUT0NPTkY9JyR7 U0hFTEx9IC91c3IvaG9tZS9maWxlX3NlcnZlci9GcmVlQlNEL3hpbmUvd29yay94aW5lLXVpLTAu OS4yMi9taXNzaW5nIC0tcnVuIGF1dG9jb25mJwpBVVRPSEVBREVSPScke1NIRUxMfSAvdXNyL2hv bWUvZmlsZV9zZXJ2ZXIvRnJlZUJTRC94aW5lL3dvcmsveGluZS11aS0wLjkuMjIvbWlzc2luZyAt LXJ1biBhdXRvaGVhZGVyJwpBVVRPTUFLRT0nJHtTSEVMTH0gL3Vzci9ob21lL2ZpbGVfc2VydmVy L0ZyZWVCU0QveGluZS93b3JrL3hpbmUtdWktMC45LjIyL21pc3NpbmcgLS1ydW4gYXV0b21ha2Ut MS42JwpBV0s9J25hd2snCkJVSUxEX0NDPScnCkJVSUxEX0RBVEU9JycKQlVJTERfSU5DTFVERURf TElCSU5UTD0nbm8nCkJVSUxEX0xJQl9TVEFUSUM9JycKQlVJTERfT1M9JycKQ0FUT0JKRVhUPScu Z21vJwpDQz0nY2MnCkNDREVQTU9ERT0nZGVwbW9kZT1nY2MzJwpDRkxBR1M9Jy1PIC1waXBlIC1t Y3B1PXBlbnRpdW1wcm8nCkNQUD0nY2MgLUUnCkNQUEZMQUdTPSctSS91c3IvbG9jYWwvaW5jbHVk ZScKQ1VSTF9DRkxBR1M9JycKQ1VSTF9DT05GSUc9JycKQ1VSTF9MSUJTPScnCkRBVEFESVJOQU1F PSdzaGFyZScKREFUQV9ESVI9JycKREVCVUdfQ0ZMQUdTPScnCkRFRlM9JycKREVQQ09NUD0nJwpE RVBESVI9Jy5kZXBzJwpESVJFQ1RGQl9DRkxBR1M9JycKRElSRUNURkJfTElCUz0nJwpEWU5BTUlD X0xEX0xJQlM9JycKRUNITz0nZWNobycKRUNIT19DPScnCkVDSE9fTj0nLW4nCkVDSE9fVD0nJwpF R1JFUD0nZ3JlcCAtRScKRVhFRVhUPScnCkdFTkNBVD0nZ2VuY2F0JwpHTElCQzIxPSdubycKR01T R0ZNVD0nL3Vzci9sb2NhbC9iaW4vbXNnZm10JwpIQVZFX0FBX0ZBTFNFPScnCkhBVkVfQUFfVFJV RT0nJwpIQVZFX0NVUkxfRkFMU0U9JycKSEFWRV9DVVJMX1RSVUU9JycKSEFWRV9ESVJFQ1RGQl9G QUxTRT0nJwpIQVZFX0RJUkVDVEZCX1RSVUU9JycKSEFWRV9HRVRPUFRfTE9OR19GQUxTRT0nJwpI QVZFX0dFVE9QVF9MT05HX1RSVUU9JycKSEFWRV9OQ1VSU0VTX0ZBTFNFPScnCkhBVkVfTkNVUlNF U19UUlVFPScnCkhBVkVfVEVSTUNBUF9GQUxTRT0nJwpIQVZFX1RFUk1DQVBfVFJVRT0nJwpIQVZF X1gxMV9GQUxTRT0nJwpIQVZFX1gxMV9UUlVFPScnCkhBVkVfWEY4NlZJRE1PREVfRkFMU0U9JycK SEFWRV9YRjg2VklETU9ERV9UUlVFPScnCkhBVkVfWElORVJBTUFfRkFMU0U9JycKSEFWRV9YSU5F UkFNQV9UUlVFPScnCkhBVkVfWFRFU1RFWFRFTlNJT05fRkFMU0U9JycKSEFWRV9YVEVTVEVYVEVO U0lPTl9UUlVFPScnCklOQ0xVREVTPScnCklOQ0xVREVfSU5UTF9GQUxTRT0nJwpJTkNMVURFX0lO VExfVFJVRT0nIycKSU5TVEFMTF9EQVRBPSdpbnN0YWxsICAtbyByb290IC1nIHdoZWVsIC1tIDQ0 NCcKSU5TVEFMTF9QUk9HUkFNPSdpbnN0YWxsICAtcyAtbyByb290IC1nIHdoZWVsIC1tIDU1NScK SU5TVEFMTF9TQ1JJUFQ9J2luc3RhbGwgIC1vIHJvb3QgLWcgd2hlZWwgLW0gNTU1JwpJTlNUQUxM X1NUUklQX1BST0dSQU09JyR7U0hFTEx9ICQoaW5zdGFsbF9zaCkgLWMgLXMnCklOU1RPQkpFWFQ9 Jy5tbycKSU5UTEJJU09OPSdiaXNvbicKSU5UTExJQlM9Jy1saW50bCcKSU5UTE9CSlM9JycKSU5U TF9MSUJUT09MX1NVRkZJWF9QUkVGSVg9J2wnCkxERkxBR1M9Jy1ML3Vzci9sb2NhbC9saWInCkxJ QklDT05WPSctbGljb252JwpMSUJJTlRMPSctbGludGwnCkxJQk9CSlM9JycKTElCUz0nJwpMSUJU T09MPSckKFNIRUxMKSAkKHRvcF9idWlsZGRpcikvbGlidG9vbCcKTElCVE9PTF9ERVBTPScuL2x0 bWFpbi5zaCcKTElCVkVSU0lPTj0nJwpMSVJDX0lOQ0xVREU9JycKTElSQ19MSUJTPScnCkxOX1M9 J2xuIC1zJwpMVExJQklDT05WPSctbGljb252JwpMVExJQklOVEw9Jy1saW50bCcKTFRMSUJPQkpT PScnCk1BS0VJTkZPPScke1NIRUxMfSAvdXNyL2hvbWUvZmlsZV9zZXJ2ZXIvRnJlZUJTRC94aW5l L3dvcmsveGluZS11aS0wLjkuMjIvbWlzc2luZyAtLXJ1biBtYWtlaW5mbycKTUtJTlNUQUxMRElS Uz0nLi9ta2luc3RhbGxkaXJzJwpNU0dGTVQ9Jy91c3IvbG9jYWwvYmluL21zZ2ZtdCcKTVNHTUVS R0U9Jy91c3IvbG9jYWwvYmluL21zZ21lcmdlJwpOQ1VSU0VTX0xJQj0nJwpORVRfTElCUz0nJwpP QkpFWFQ9J28nClBBQ0tBR0U9J3hpbmUtdWknClBBQ0tBR0VfQlVHUkVQT1JUPScnClBBQ0tBR0Vf TkFNRT0nJwpQQUNLQUdFX1NUUklORz0nJwpQQUNLQUdFX1RBUk5BTUU9JycKUEFDS0FHRV9WRVJT SU9OPScnClBBVEhfU0VQQVJBVE9SPSc6JwpQS0dfQ09ORklHPScnClBPU1VCPSdwbycKUkFOTElC PSdyYW5saWInClJFQURMSU5FX0xPQ0FMX0NGTEFHUz0nJwpTRVRfTUFLRT0nJwpTSEVMTD0nL2Jp bi9zaCcKU1BFQ19WRVJTSU9OPScwLjkuMjInClNUQVRJQz0nJwpTVFJJUD0nc3RyaXAnClNZU0NP TkZfRElSPScnClRBUl9OQU1FPSd4aW5lLXVpLTAuOS4yMicKVEVSTUNBUF9MSUI9JycKVEhSRUFE X0NGTEFHUz0nLURfVEhSRUFEX1NBRkUnClRIUkVBRF9MSUJTPSctbGNfcicKVVNFX0lOQ0xVREVE X0xJQklOVEw9J25vJwpVU0VfTkxTPSd5ZXMnClZFUlNJT049JzAuOS4yMicKWEdFVFRFWFQ9Jy91 c3IvbG9jYWwvYmluL3hnZXR0ZXh0JwpYSU5FX0FDRkxBR1M9Jy1JIC91c3IvbG9jYWwvc2hhcmUv YWNsb2NhbCcKWElORV9CTEFDS19TVFJFQU09JycKWElORV9DRkxBR1M9JycKWElORV9DT05GSUc9 Jy91c3IvbG9jYWwvYmluL3hpbmUtY29uZmlnJwpYSU5FX0RPQ0RJUj0nJwpYSU5FX0xJQlM9JycK WElORV9MT0NBTEU9JycKWElORV9MT0dPX01STD0nJwpYSU5FX01BSk9SPScwJwpYSU5FX01JTk9S PSc5JwpYSU5FX1NDUklQVERJUj0nJwpYSU5FX1NLSU5ESVI9JycKWElORV9TUExBU0g9JycKWElO RV9TVUI9JzIyJwpYSU5FX1ZJU0RJUj0nJwpYVEVTVF9MSUJTPScnClhfQ0ZMQUdTPScnClhfRVhU UkFfTElCUz0nJwpYX0xJQlM9JycKWF9QUkVfTElCUz0nJwphY19jdF9DQz0nJwphY19jdF9SQU5M SUI9J3JhbmxpYicKYWNfY3RfU1RSSVA9J3N0cmlwJwphbV9faW5jbHVkZT0naW5jbHVkZScKYW1f X3F1b3RlPScnCmJpbmRpcj0nJHtleGVjX3ByZWZpeH0vYmluJwpidWlsZD0naTM4Ni1wb3J0Ymxk LWZyZWVic2Q1LjEnCmJ1aWxkX2FsaWFzPSdpMzg2LXBvcnRibGQtZnJlZWJzZDUuMScKYnVpbGRf Y3B1PSdpMzg2JwpidWlsZF9vcz0nZnJlZWJzZDUuMScKYnVpbGRfdmVuZG9yPSdwb3J0YmxkJwpk YXRhZGlyPScke3ByZWZpeH0vc2hhcmUnCmV4ZWNfcHJlZml4PSdOT05FJwpob3N0PSdpMzg2LXBv cnRibGQtZnJlZWJzZDUuMScKaG9zdF9hbGlhcz0naTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEnCmhv c3RfY3B1PSdpMzg2Jwpob3N0X29zPSdmcmVlYnNkNS4xJwpob3N0X3ZlbmRvcj0ncG9ydGJsZCcK aW5jbHVkZWRpcj0nJHtwcmVmaXh9L2luY2x1ZGUnCmluZm9kaXI9JyR7cHJlZml4fS9pbmZvJwpp bnN0YWxsX3NoPScvdXNyL2hvbWUvZmlsZV9zZXJ2ZXIvRnJlZUJTRC94aW5lL3dvcmsveGluZS11 aS0wLjkuMjIvaW5zdGFsbC1zaCcKbGliZGlyPScke2V4ZWNfcHJlZml4fS9saWInCmxpYmV4ZWNk aXI9JyR7ZXhlY19wcmVmaXh9L2xpYmV4ZWMnCmxvY2Fsc3RhdGVkaXI9JyR7cHJlZml4fS92YXIn Cm1hbmRpcj0nJHtwcmVmaXh9L21hbicKb2xkaW5jbHVkZWRpcj0nL3Vzci9pbmNsdWRlJwpwcmVm aXg9Jy91c3IvWDExUjYnCnByb2dyYW1fdHJhbnNmb3JtX25hbWU9JycKc2JpbmRpcj0nJHtleGVj X3ByZWZpeH0vc2JpbicKc2hhcmVkc3RhdGVkaXI9JyR7cHJlZml4fS9jb20nCnN5c2NvbmZkaXI9 JyR7cHJlZml4fS9ldGMnCnRhcmdldD0naTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEnCnRhcmdldF9h bGlhcz0naTM4Ni1wb3J0YmxkLWZyZWVic2Q1LjEnCnRhcmdldF9jcHU9J2kzODYnCnRhcmdldF9v cz0nZnJlZWJzZDUuMScKdGFyZ2V0X3ZlbmRvcj0ncG9ydGJsZCcKCiMjIC0tLS0tLS0tLS0tICMj CiMjIGNvbmZkZWZzLmguICMjCiMjIC0tLS0tLS0tLS0tICMjCgojZGVmaW5lIEVOQUJMRV9OTFMg MQojZGVmaW5lIEhBVkVfQUxMT0NBIDEKI2RlZmluZSBIQVZFX0RDR0VUVEVYVCAxCiNkZWZpbmUg SEFWRV9ETEZDTl9IIDEKI2RlZmluZSBIQVZFX0ZFT0ZfVU5MT0NLRUQgMQojZGVmaW5lIEhBVkVf R0VUQ1dEIDEKI2RlZmluZSBIQVZFX0dFVENfVU5MT0NLRUQgMQojZGVmaW5lIEhBVkVfR0VURUdJ RCAxCiNkZWZpbmUgSEFWRV9HRVRFVUlEIDEKI2RlZmluZSBIQVZFX0dFVEdJRCAxCiNkZWZpbmUg SEFWRV9HRVRQQUdFU0laRSAxCiNkZWZpbmUgSEFWRV9HRVRURVhUIDEKI2RlZmluZSBIQVZFX0dF VFVJRCAxCiNkZWZpbmUgSEFWRV9JQ09OViAxCiNkZWZpbmUgSEFWRV9JTlRUWVBFU19IIDEKI2Rl ZmluZSBIQVZFX0lOVFRZUEVTX0ggMQojZGVmaW5lIEhBVkVfSU5UVFlQRVNfSF9XSVRIX1VJTlRN QVggMQojZGVmaW5lIEhBVkVfTEFOR0lORk9fQ09ERVNFVCAxCiNkZWZpbmUgSEFWRV9MQ19NRVNT QUdFUyAxCiNkZWZpbmUgSEFWRV9MSU1JVFNfSCAxCiNkZWZpbmUgSEFWRV9MT0NBTEVfSCAxCiNk ZWZpbmUgSEFWRV9NRU1PUllfSCAxCiNkZWZpbmUgSEFWRV9NTUFQIDEKI2RlZmluZSBIQVZFX01V Tk1BUCAxCiNkZWZpbmUgSEFWRV9OTF9UWVBFU19IIDEKI2RlZmluZSBIQVZFX1BVVEVOViAxCiNk ZWZpbmUgSEFWRV9TRVRFTlYgMQojZGVmaW5lIEhBVkVfU0VUTE9DQUxFIDEKI2RlZmluZSBIQVZF X1NURERFRl9IIDEKI2RlZmluZSBIQVZFX1NURElOVF9IIDEKI2RlZmluZSBIQVZFX1NURElOVF9I X1dJVEhfVUlOVE1BWCAxCiNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCiNkZWZpbmUgSEFWRV9TVERM SUJfSCAxCiNkZWZpbmUgSEFWRV9TVERMSUJfSCAxCiNkZWZpbmUgSEFWRV9TVFBDUFkgMQojZGVm aW5lIEhBVkVfU1RSQ0FTRUNNUCAxCiNkZWZpbmUgSEFWRV9TVFJEVVAgMQojZGVmaW5lIEhBVkVf U1RSSU5HU19IIDEKI2RlZmluZSBIQVZFX1NUUklOR19IIDEKI2RlZmluZSBIQVZFX1NUUklOR19I IDEKI2RlZmluZSBIQVZFX1NUUlRPVUwgMQojZGVmaW5lIEhBVkVfU1lTX1BBUkFNX0ggMQojZGVm aW5lIEhBVkVfU1lTX1NUQVRfSCAxCiNkZWZpbmUgSEFWRV9TWVNfVFlQRVNfSCAxCiNkZWZpbmUg SEFWRV9UU0VBUkNIIDEKI2RlZmluZSBIQVZFX1VOSVNURF9IIDEKI2RlZmluZSBIQVZFX1VOSVNU RF9IIDEKI2RlZmluZSBIQVZFX1VOSVNURF9IIDEKI2RlZmluZSBIQVZFX1VOU0lHTkVEX0xPTkdf TE9ORyAxCiNkZWZpbmUgSUNPTlZfQ09OU1QgY29uc3QKI2RlZmluZSBJTlRESVYwX1JBSVNFU19T SUdGUEUgMQojZGVmaW5lIFBBQ0tBR0UgInhpbmUtdWkiCiNkZWZpbmUgUEFDS0FHRV9CVUdSRVBP UlQgIiIKI2RlZmluZSBQQUNLQUdFX05BTUUgIiIKI2RlZmluZSBQQUNLQUdFX1NUUklORyAiIgoj ZGVmaW5lIFBBQ0tBR0VfVEFSTkFNRSAiIgojZGVmaW5lIFBBQ0tBR0VfVkVSU0lPTiAiIgojZGVm aW5lIFNURENfSEVBREVSUyAxCiNkZWZpbmUgU1REQ19IRUFERVJTIDEKI2RlZmluZSBWRVJTSU9O ICIwLjkuMjIiCgpjb25maWd1cmU6IGV4aXQgMQo= --=====================_52938843==_-- From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 16:15:16 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9C3C116A4CE for ; Sat, 15 Nov 2003 16:15:16 -0800 (PST) Received: from smtp1.adl2.internode.on.net (smtp1.adl2.internode.on.net [203.16.214.181]) by mx1.FreeBSD.org (Postfix) with ESMTP id 021FC43F85 for ; Sat, 15 Nov 2003 16:15:15 -0800 (PST) (envelope-from malcolm.kay@internode.on.net) Received: from beta.home (ppp137-199.lns1.adl2.internode.on.net [150.101.137.199])hAG0F7Tn082178; Sun, 16 Nov 2003 10:45:09 +1030 (CST) Content-Type: text/plain; charset="iso-8859-1" From: Malcolm Kay Organization: At home To: "Brunoc@quipo.it" , "Marty Landman" Date: Sun, 16 Nov 2003 10:45:06 +1030 User-Agent: KMail/1.4.3 References: <6.0.0.22.0.20031114190056.11752140@pop.face2interface.com> <047801c3abcf$484ea740$0dc35e3e@computer> In-Reply-To: <047801c3abcf$484ea740$0dc35e3e@computer> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <200311161045.06911.malcolm.kay@internode.on.net> cc: freebsd-questions@freebsd.org Subject: Re: how to map pfkeys to screen -r cmds X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 00:15:16 -0000 On Sun, 16 Nov 2003 09:45, brunoc@quipo.it wrote: > On Saturday, November 15, 2003,Marty Landman wrote: > >Thought I recently read something in the Handbook about being able to > >switch screens easily using the pfkeys but didn't see the how of it. T= oday > >learned the screen cmd following a tip from the fbds Diary but the > >usefulness would be greatly enhanced with some quick way to go through= the > >screens. How hard is this effect to set up, either with or w/o screens= ? > >Also I'm ssh'ing into my session in case that matters. > > > >Marty Landman Face 2 Interface Inc 845-679-9387 > >Sign On Required: Web membership software for your site > >Make a Website: http://face2interface.com/Home/Demo.shtml > > Marty, > > to switch between screens (there are eight pre-configured > virtual screens on FreeBSD,named /dev/stty0 to /dev/stty7, > stty0 being also the console output for system messages), I must say you seem to have a rather unusual FreeBSD setup. On my 4.7-STABLE machine I believe the default number of=20 virtual consoles is 16 with the first 12 having by default /dev entries /dev/ttyv0 to /dev/ttyvb; certainly not /dev/stty0 ... and are selectable with Alt-f1 to Alt-f12 when active. By default the first 8 consoles are activated for login in /etec/ttys. (When inside X you need Ctl-Alt-f1 etc. otherwise the combination gets captured by X) > you use the key combination Alt-Ctrl-F1 to Alt-Ctrl-F8, > or Ctrl-F1 to Ctrl-F8 (the latter ones do not work if you want > to switch to screen 0-8 while you are in your desktop > environment or window manager). Alt-f1 etc; not Ctl-f1 etc. > If you started X-window,by using a window manager > or a desktop environment,normally it uses virtual screen > #10 (you can change the virtual screens in the /etc/ttys file). X usually starts on the first inactive virtual terminal, which usually is= =20 /dev/ttyv8. If started through ttys then it actually ignores the virtual=20 terminal number in the entry. In this case you switch to the X display with Ctl-Alt-f9 or simply Alt-f9= =2E Virtual consoles not otherwise active can be used for input/output consoles for your own programs.=20 Malcolm Kay > "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 16:20:19 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C8B6416A4CE for ; Sat, 15 Nov 2003 16:20:19 -0800 (PST) Received: from sccrmhc13.comcast.net (sccrmhc13.comcast.net [204.127.202.64]) by mx1.FreeBSD.org (Postfix) with ESMTP id F1F5C43F93 for ; Sat, 15 Nov 2003 16:20:18 -0800 (PST) (envelope-from fbsd-questions@trini0.org) Received: from hivemind.trini0.org (trini0.org[68.39.114.118]) by comcast.net (sccrmhc13) with ESMTP id <2003111600201801600hilbqe>; Sun, 16 Nov 2003 00:20:18 +0000 Received: from gladiator.trini0.org (gladiator.trini0.org [192.168.0.3]) by hivemind.trini0.org (Postfix) with ESMTP id 385555D for ; Sat, 15 Nov 2003 19:20:14 -0500 (EST) From: Gerard Samuel To: questions@freebsd.org Date: Sat, 15 Nov 2003 19:20:13 -0500 User-Agent: KMail/1.5.4 References: <200311151417.14480.fbsd-questions@trini0.org> <200311151613.14278.fbsd-questions@trini0.org> <200311152307.17561.peter.schuller@infidyne.com> In-Reply-To: <200311152307.17561.peter.schuller@infidyne.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200311151920.13977.fbsd-questions@trini0.org> Subject: Re: DHCP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 00:20:19 -0000 On Saturday 15 November 2003 05:07 pm, Peter Schuller wrote: > Unless you need the laptop to always have that certain hostname, you should > just be able to remove the host {} section and any devices, including the > laptop, should get an IP address from the pool. Well I tried it and it seems to be working with the windows clients. Thanks for the tip... From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 16:23:35 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0EC5116A4CE for ; Sat, 15 Nov 2003 16:23:35 -0800 (PST) Received: from quipo.it (mx.quipo.it [212.43.108.3]) by mx1.FreeBSD.org (Postfix) with ESMTP id 162AB43FA3 for ; Sat, 15 Nov 2003 16:23:33 -0800 (PST) (envelope-from brunoc@quipo.it) Received: from computer [62.94.2.92] by quipo.it with ESMTP (SMTPD32-7.15) id A3807D5B00FE; Sun, 16 Nov 2003 01:23:28 +0100 Message-ID: <001301c3abd7$dbe45b00$5c025e3e@computer> From: "Brunoc@quipo.it" To: "Marty Landman" References: <6.0.0.22.0.20031114190056.11752140@pop.face2interface.com> Date: Sun, 16 Nov 2003 01:23:26 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-Declude-Sender: brunoc@quipo.it [62.94.2.92] X-Declude-Spoolname: Dc3807d5b00fea4c2.SMD cc: freebsd-questions@freebsd.org Subject: Re: how to map pfkeys to screen -r cmds Errata corrige X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 00:23:35 -0000 On my previous reply message,the line "...If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #10..."=20 reads "...If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #9...". The 1st virtual screen is stty0,so the 10th is stty9, the default one allocated to X sessions. That's why you will use Ctrl-F10 while on another screen to resume X session's screen (10th:stty9). On Saturday, November 15, 2003,Marty Landman wrote: >Thought I recently read something in the Handbook about being able to=20 >switch screens easily using the pfkeys but didn't see the how of it. = Today=20 >learned the screen cmd following a tip from the fbds Diary but the=20 >usefulness would be greatly enhanced with some quick way to go through = the=20 >screens. How hard is this effect to set up, either with or w/o screens? = >Also I'm ssh'ing into my session in case that matters. >Marty Landman Face 2 Interface Inc 845-679-9387 >Sign On Required: Web membership software for your site >Make a Website: http://face2interface.com/Home/Demo.shtml Marty, to switch between screens (there are eight pre-configured virtual screens on FreeBSD,named /dev/stty0 to /dev/stty7, stty0 being also the console output for system messages), you use the key combination Alt-Ctrl-F1 to Alt-Ctrl-F8, or Ctrl-F1 to Ctrl-F8 (the latter ones do not work if you want to switch to screen 0-8 while you are in your desktop=20 environment or window manager). If you started X-window,by using a window manager or a desktop environment,normally it uses virtual screen #10 (you can change the virtual screens in the /etc/ttys file). So remember that in case you switch to any of the virtual screens 0 to 7,if you want to resume your X session (your window manager or desktop environment), you have to press Alt-F10. Best regards Bruno --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude = Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org" --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude = Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus] From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 16:38:32 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 67ADC16A4CF for ; Sat, 15 Nov 2003 16:38:32 -0800 (PST) Received: from zim.0x7e.net (zim.0x7e.net [203.38.184.132]) by mx1.FreeBSD.org (Postfix) with ESMTP id 435F743FB1 for ; Sat, 15 Nov 2003 16:38:31 -0800 (PST) (envelope-from listone@deathbeforedecaf.net) Received: from goo.0x7e.net ([203.38.184.164] helo=goo) by zim.0x7e.net with smtp (Exim 3.36 #1) id 1ALAvq-000DiN-00; Sun, 16 Nov 2003 11:08:26 +1030 Message-ID: <029d01c3abd9$f2bcfab0$a4b826cb@goo> From: "Rob" To: "Gerard Samuel" , References: <200311151417.14480.fbsd-questions@trini0.org> Date: Sun, 16 Nov 2003 11:08:25 +1030 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4927.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4927.1200 Subject: Re: DHCP X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 00:38:32 -0000 A couple of things: The range statement is for unknown clients - they will be given a lease in this range by the server. It doesn't control the host definition, which will use the address in the fixed-address statement. The host definition would normally go inside the subnet definition - at the moment, it's not going to get the netmask or router options. Any errors in the dhcpd.conf will be mentioned in /var/log/messages when the service starts up. Hope that helps.... ----- Original Message ----- From: "Gerard Samuel" To: Sent: Sunday, November 16, 2003 5:47 AM Subject: DHCP > A bit off topic, but any help would be appreciated. > Im trying to setup DHCP for the first time. > I set winXP to auto configure itself in the network section, but it > still remains on the IP address that it was previously set at, and not > obeying, the range of IP Addresses listed in dhcp.conf. > The connection works, I can use the network, but looking to see if there are > any errors in dhcp.conf file. > > Also, is there a way to not specify the MAC address, and have DHCP still work. > For example, say a family member comes over with their laptop, can they just > plug in and go?? > > Thanks for any pointers... > > dhcp.conf > ----- > # dhcpd.conf > # > # Sample configuration file for ISC dhcpd > # > > # option definitions common to all supported networks... > option domain-name "trini0.org"; > option domain-name-servers 192.168.0.2; > > default-lease-time 600; > max-lease-time 7200; > > # ad-hoc DNS update scheme - set to "none" to disable dynamic DNS updates. > ddns-update-style none; > > subnet 192.168.0.0 netmask 255.255.255.0 { > range 192.168.0.100 192.168.0.254; > option routers 192.168.0.1; > } > > #laptop > host laptop { > hardware ethernet 00:50:BA:7A:F0:A3; > fixed-address laptop.trini0.org; > } > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 17:02:29 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 76AFE16A4CE for ; Sat, 15 Nov 2003 17:02:29 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 46B6443FBD for ; Sat, 15 Nov 2003 17:02:28 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hAG12Gp6028482; Sat, 15 Nov 2003 20:02:17 -0500 (EST) Message-Id: <6.0.0.22.0.20031115194514.05333a70@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sat, 15 Nov 2003 20:02:22 -0500 To: Malcolm Kay , "Brunoc@quipo.it" From: Marty Landman In-Reply-To: <200311161045.06911.malcolm.kay@internode.on.net> References: <6.0.0.22.0.20031114190056.11752140@pop.face2interface.com> <047801c3abcf$484ea740$0dc35e3e@computer> <200311161045.06911.malcolm.kay@internode.on.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed cc: freebsd-questions@freebsd.org Subject: Re: how to map pfkeys to screen -r cmds X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 01:02:29 -0000 At 07:15 PM 11/15/2003, Malcolm Kay wrote: >On my 4.7-STABLE machine I believe the default number of >virtual consoles is 16 with the first 12 having by default /dev entries >/dev/ttyv0 to /dev/ttyvb; certainly not /dev/stty0 ... >and are selectable with Alt-f1 to Alt-f12 when active. >By default the first 8 consoles are activated for login in /etec/ttys. I'm on 4.8-RELEASE and a GENERIC Kernel. When I try alt-f3 from my ssh session I get [13~. All the function keys with alt do similarly. What am I missing? I've learned to use the screen cmd although it's a bit easy to get lost in there, is this built on that or something else? Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 17:56:26 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 922AD16A4CE for ; Sat, 15 Nov 2003 17:56:26 -0800 (PST) Received: from digital-village.net (digital-village.net [206.53.239.227]) by mx1.FreeBSD.org (Postfix) with ESMTP id A780043F3F for ; Sat, 15 Nov 2003 17:56:25 -0800 (PST) (envelope-from skidmore@digital-village.net) Received: from [206.53.239.227] (digital-village.net [206.53.239.227]) by digital-village.net (8.12.9p2/8.12.9) with ESMTP id hAG23Y1x016977 for ; Sat, 15 Nov 2003 21:03:34 -0500 (EST) (envelope-from skidmore@digital-village.net) From: Barry Skidmore To: FreeBSD-Questions Content-Type: text/plain Message-Id: <1068948213.16938.8.camel@digital-village.net> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.4 Date: Sat, 15 Nov 2003 21:03:34 -0500 Content-Transfer-Encoding: 7bit Subject: Problems Installing Printer with CUPS X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: skidmore@digital-village.net List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 01:56:26 -0000 I am using FreeBSD-4.9-RELEASE on an i386 machine with cups-1.1.19. I have tried to add a networked HP JetDirect LaserJet printer using both the cups web interface, and using "gnome-cups-manager" from the ports collection. In both cases, when I reach the final step in adding the printer I receive an "Internal Server Error" message, and the printer is not added. In doing a Google search, I have found that many others have reported this same error, but so far I have not found a solution. Any help is appreciated. Thanks, Barry From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 17:58:04 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 64F9216A4CE for ; Sat, 15 Nov 2003 17:58:04 -0800 (PST) Received: from data54.com (mail.data54.com [200.49.102.75]) by mx1.FreeBSD.org (Postfix) with ESMTP id 869EC43FDF for ; Sat, 15 Nov 2003 17:58:02 -0800 (PST) (envelope-from gaston008@data54.com) Received: from [200.61.34.52] (account gaston008 HELO window) by data54.com (CommuniGate Pro SMTP 4.0.5) with ESMTP id 11511412; Sat, 15 Nov 2003 22:49:24 +0000 Message-ID: <011e01c3abe5$7c9c89c0$0700a8c0@window> From: "Gaston Benitez" To: "Jerry McAllister" , "yo _" References: <200311121728.hACHS2e05067@clunix.cl.msu.edu> Date: Sat, 15 Nov 2003 22:14:05 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 cc: freebsd-questions@freebsd.org Subject: RE: Another Newbie Question: C or C++ X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list Reply-To: Gaston Benitez List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 01:58:04 -0000 first of all, sorry by my English I am agree with people who says take courseworks, and those who say learn your self, I did both, but first I had to learn on my own, and thatīs really a very, very hard task to do! ;) and I only recomend it if you are some kind of Indiana Jones and have time enought to dedicate it . The benefits of self teaching I found, were the goals. The first time I made a pointer works were the hapiest day of my life!!! and the first program I made can you imagine!? :) Another thing to point to is the fact that someone who learns on his/her own, has a more accurate knowledge regarding errors mesages, time compiling messg, and almost any kind of the most strange errors messg that never occur on the real life !! :) I really like self teaching, altough every time I can, I take as much courses as possible. I learnt many things in that way, the first people who showed me Linux said three things Thatīs the way you get in Thatīs the way you get out Thatīs the way you get help! Now I at the same time Iīm using Linux, I use FreeBSD too. By the way... now Iīm dedicating time to asm. Thatīs really, really hard!! bye Gastón Again... Sorry by my English! :) ----- Original Message ----- From: Jerry McAllister To: yo _ Cc: Sent: Wednesday, November 12, 2003 2:28 PM Subject: Re: Another Newbie Question: C or C++ > > > > >I would recommend not trying to learn C or C++ by yourself from a book. > > >The fastest (and best way) to learn the right stuff is to take coursework > > >from a university or community college. > > > > >If the courses are any good, you'll get feedback, and you'll be paced > > >and challenged with projects designed to help you learn. > > > > > >Going it alone in an unguided environment will only familiarize you > > >the lesser aspects of a language, if you last that long. The difficult > > >and most important aspects of the language (like pointers, virtual > > >functions, references) will become almost insurmountable trial-and-error > > >obstacles if you try to teach yourself. > > This is a good point. The person who takes a class should (prividing the > class is well done) be guided through the whole range of the language. > Whereas someone learning on their own just picks up the pieces they > need at the moment and then fixates on those parts and doesn't go on > to learn the whole range of the language. > > > If you want to get a lower paying and boring job programming in C/C++ for > > whatever reason and have a piece of paper that says you can have that job, I > > recommend wasting 4-6 months taking a course in your spare time to learn > > C/C++. If you want to be top of your game and learn C/C++ without wasting > > time on topics that take you a minute to understand, get a good book, > > practice the topics you have learned at your own pace, get numorous code > > examples for things you may want to do (sockets, GUI, OpenGL, ncurses, > > threading, kernel interfacing) from the glorious and infinite internet and > > emulate good programming style (using const qualifiers in C++, using > > #defines in C, etc.). Also be prepared to teach yourself because you may not > > always be prepared for a job you may find yourself with; learn how to easily > > learn and use external libraries. > > The only really valuable thing from this flame is the implication that > you must go on and keep using the new learning and add to it from > man sources. It is not a waste of time to learn it right from the start. > > > The best programmers will teach themselves. A statement that may be on the > > borderline of opinion to fact by constant example. After all the first > > programmer, in fact, taught herself. > > And it was a lifelong mistake-filled iterative process. If the material > was already there in the beginning as it is for C, C++, Fortran, Assembly, > etc, then that lifelong process could have started at a higher level of > understanding and moved on from their instead of having to spend so > many years of rummaging around at the primative levels. > > Mostly, I am just responding to the making of a sweeping generalization > that may apply to a very few, but for the most is meaningless. It seems > to take a narrow viewpoint to make up a flame. > > ////jerry > > > -Rian Hunter > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 18:37:42 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id C2A2616A4CE for ; Sat, 15 Nov 2003 18:37:42 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id DDA6B43F93 for ; Sat, 15 Nov 2003 18:37:41 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hAG2bPp6014122 for ; Sat, 15 Nov 2003 21:37:32 -0500 (EST) Message-Id: <6.0.0.22.0.20031115211837.0601e780@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sat, 15 Nov 2003 21:37:32 -0500 To: freebsd-questions@FreeBSD.org From: Marty Landman Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Subject: Samba question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 02:37:42 -0000 Ok, I think this is a mess now. First I tried the toot in the FBSD Diary, and now the chapter 2 toot from O'Reilly. My Samba install is likely way out of rhythm! Still it's so close - I can see the share on windoz explorer but can't access it that maybe others here can help. Here's most of what's in my /usr/local/etc/smb.conf (the test path, i.e. my share is chmod 777) [global] workgroup = Face2Interface server string = Samba Server hosts allow = 192.168.0. 127. [test] comment = For testing only, please path = /usr/local/www/data read only = yes guest ok = yes >>>>> output of logs SwamiSalami# tail /var/log/log.nmbd Copyright Andrew Tridgell and the Samba Team 1994-2002 [2003/11/15 21:18:52, 0] nmbd/nmbd.c:terminate(59) Got SIGTERM: going down... [2003/11/15 21:19:08, 0] nmbd/nmbd.c:main(795) Netbios nameserver version 2.2.8 started. Copyright Andrew Tridgell and the Samba Team 1994-2002 [2003/11/15 21:19:12, 0] nmbd/nmbd_responserecordsdb.c:find_response_record(235) find_response_record: response packet id 24148 received with no matching record. [2003/11/15 21:19:12, 0] nmbd/nmbd_responserecordsdb.c:find_response_record(235) find_response_record: response packet id 24149 received with no matching record. SwamiSalami# tail /var/log/log.smbd [2003/11/15 21:18:57, 0] smbd/server.c:main(791) smbd version 2.2.8 started. Copyright Andrew Tridgell and the Samba Team 1992-2002 [2003/11/15 21:18:57, 0] printing/print_cups.c:cups_printer_fn(107) Unable to connect to CUPS server localhost - Connection refused [2003/11/15 21:19:13, 0] smbd/server.c:main(791) smbd version 2.2.8 started. Copyright Andrew Tridgell and the Samba Team 1992-2002 [2003/11/15 21:19:13, 0] printing/print_cups.c:cups_printer_fn(107) Unable to connect to CUPS server localhost - Connection refused SwamiSalami# tail /var/log/log.swamisalami [2003/11/15 11:24:05, 0] printing/print_cups.c:cups_printername_ok(336) Unable to connect to CUPS server localhost - Connection refused [2003/11/15 11:24:05, 0] smbd/service.c:make_connection(252) swamisalami (192.168.0.7) couldn't find service usr [2003/11/15 11:25:15, 0] printing/print_cups.c:cups_printername_ok(336) Unable to connect to CUPS server localhost - Connection refused [2003/11/15 11:25:15, 0] smbd/service.c:make_connection(252) swamisalami (192.168.0.7) couldn't find service usr BTW dudes, what's a CUPS server? 8^} Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 18:45:24 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D78A616A4CE for ; Sat, 15 Nov 2003 18:45:24 -0800 (PST) Received: from out2.smtp.messagingengine.com (out2.smtp.messagingengine.com [66.111.4.26]) by mx1.FreeBSD.org (Postfix) with ESMTP id BA09C43FBF for ; Sat, 15 Nov 2003 18:45:22 -0800 (PST) (envelope-from judmarc@fastmail.fm) X-Sasl-enc: 7wjgqieLoKS0WnNR4DKm7w 1068950719 Received: from jud.dyndns.org (dialup-67.74.79.158.Dial1.Philadelphia1.Level3.net [67.74.79.158]) by mail.messagingengine.com (Postfix) with ESMTP id 0DF98416122; Sat, 15 Nov 2003 21:45:18 -0500 (EST) To: "Michael L. Squires" , germain@purdue.edu References: <200311152346.hAFNkSv9035956@siralan.org> Message-ID: From: Jud Content-Type: text/plain; format=flowed; delsp=yes; charset=utf-8 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Date: Sat, 15 Nov 2003 21:45:21 -0500 In-Reply-To: <200311152346.hAFNkSv9035956@siralan.org> User-Agent: Opera M2/7.30 (FreeBSD, build 505) cc: FreeBSD questions Subject: Re: Dual Booting FreeBSD X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 02:45:25 -0000 On Sat, 15 Nov 2003 18:46:27 -0500 (EST), Michael L. Squires wrote: >> 40 gigs. Would it be easier to install FreeBSD on the unformatted >> partition >> or the new hard drive for the purpose of dual booting with xp? Also, >> does >> anyone know how to set up a dual boot system or know of a good guide to >> doing >> so? > > I have one system which uses XOSL with separate disks (SCSI) for FreeBSD > 5.1-CURRENT and XP, and another using the standard FBSD boot manager > where the primary disk is all XP and FreeBSD uses the first partition > of the secondary drive. > > Both work fine. Actually, your FreeBSD install can use both the new drive and the free space on the original drive, but if you'd rather have 40GB to use on something else, that's fine. If you install FreeBSD (or at least the root partition) on the new drive and you use FreeBSD's bootloader, be sure to install the bootloader on *both* drives. There are instructions regarding how to dual boot using the Windows bootloader in the FAQ at the FreeBSD web site. I have always found the instructions for doing this with both OSs on one drive easier to understand than the instructions for two drives, but your experience may be different. Other available free bootloaders include the abovementioned XOSL, Grub from the FreeBSD ports system, and the one I'm using now (after having tried all the above except XOSL), GAG, which is very easy and automagic. Jud From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 18:46:29 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 408B516A4CE for ; Sat, 15 Nov 2003 18:46:29 -0800 (PST) Received: from endif.cjb.net (65-101-229-205.dnvr.qwest.net [65.101.229.205]) by mx1.FreeBSD.org (Postfix) with SMTP id F3A0E43FDF for ; Sat, 15 Nov 2003 18:46:27 -0800 (PST) (envelope-from end@endif.cjb.net) Received: (qmail 55251 invoked from network); 16 Nov 2003 02:46:31 -0000 Received: from localhost (127.0.0.1) by localhost with SMTP; 16 Nov 2003 02:46:31 -0000 Date: Sat, 15 Nov 2003 19:46:30 -0700 From: Robin Schoonover To: Marty Landman Message-Id: <20031115194630.2f86020b.end@endif.cjb.net> In-Reply-To: <6.0.0.22.0.20031115211837.0601e780@pop.face2interface.com> References: <6.0.0.22.0.20031115211837.0601e780@pop.face2interface.com> X-Mailer: Sylpheed version 0.9.6claws (GTK+ 1.2.10; i386-portbld-freebsd5.1) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit cc: freebsd-questions@FreeBSD.org Subject: Re: Samba question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 02:46:29 -0000 On Sat, 15 Nov 2003 21:37:32 -0500, Marty Landman wrote: > Ok, I think this is a mess now. First I tried the toot in the FBSD Diary, > > and now the chapter 2 toot from O'Reilly. My Samba install is likely way > out of rhythm! Still it's so close - I can see the share on windoz > explorer but can't access it that maybe others here can help. > Hmm. Ignoring everything else you gave us, I'd say it sounds like there is a firewall in the way. I've had the exact same problem before. > BTW dudes, what's a CUPS server? 8^} CUPS is the Common UNIX Printing System. -- Robin Schoonover (aka End) # # We're not surrounded, we're in a target-rich environment! # From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 20:12:32 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 687A116A4CE for ; Sat, 15 Nov 2003 20:12:32 -0800 (PST) Received: from www6.web2010.com (www6.web2010.com [216.157.5.254]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8C84A43F75 for ; Sat, 15 Nov 2003 20:12:31 -0800 (PST) (envelope-from MLandman@face2interface.com) Received: from delliver.face2interface.com (dialup-wash-129-203.thebiz.net [64.30.129.203] (may be forged)) by www6.web2010.com (8.12.10/8.9.0) with ESMTP id hAG4CHp6028379; Sat, 15 Nov 2003 23:12:18 -0500 (EST) Message-Id: <6.0.0.22.0.20031115230248.01dec880@pop.face2interface.com> X-Sender: face@pop.face2interface.com X-Mailer: QUALCOMM Windows Eudora Version 6.0.0.22 Date: Sat, 15 Nov 2003 23:12:24 -0500 To: Robin Schoonover From: Marty Landman In-Reply-To: <20031115194630.2f86020b.end@endif.cjb.net> References: <6.0.0.22.0.20031115211837.0601e780@pop.face2interface.com> <20031115194630.2f86020b.end@endif.cjb.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed cc: freebsd-questions@FreeBSD.org Subject: Re: Samba question X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 04:12:32 -0000 At 09:46 PM 11/15/2003, Robin Schoonover wrote: >Hmm. Ignoring everything else you gave us, I'd say it sounds like there is >a firewall in the way. I've had the exact same problem before. I believe I have ipfw disabled.. # ps -ax|grep ipfw # I start it up by doing # /usr/local/sbin/smbd -D ; /usr/local/sbin/nmbd -D and then only find nmbd running.. is that normal behavior? Also even after killing nmbd it comes back seemingly on its own. Sorry if I'm rambling on but I seem to be lost. Maybe I should instead try to copy the cups and samba execs in rc.d from their defaults and do a shutdown. Anyway... Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml From owner-freebsd-questions@FreeBSD.ORG Sat Nov 15 21:49:49 2003 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 85FC416A4CE for ; Sat, 15 Nov 2003 21:49:49 -0800 (PST) Received: from imf16aec.mail.bellsouth.net (imf16aec.mail.bellsouth.net [205.152.59.64]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8B73143FB1 for ; Sat, 15 Nov 2003 21:49:48 -0800 (PST) (envelope-from b_cassidy@bellsouth.net) Received: from bellsouth.net ([68.214.82.231]) by imf16aec.mail.bellsouth.netSMTP <20031116054948.HJHO20993.imf16aec.mail.bellsouth.net@bellsouth.net> for ; Sun, 16 Nov 2003 00:49:48 -0500 Date: Sun, 16 Nov 2003 00:54:21 -0600 From: Bryan Cassidy To: freebsd-questions@freebsd.org Message-Id: <20031116005421.45203e19.b_cassidy@bellsouth.net> In-Reply-To: <1068948213.16938.8.camel@digital-village.net> References: <1068948213.16938.8.camel@digital-village.net> X-Mailer: Sylpheed version 0.9.7 (GTK+ 1.2.10; i386-portbld-freebsd4.9) Mime-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg="pgp-sha1"; boundary="Signature=_Sun__16_Nov_2003_00_54_21_-0600_W6A=9Vka/5SFm4wt" Subject: Re: Problems Installing Printer with CUPS X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 16 Nov 2003 05:49:49 -0000 --Signature=_Sun__16_Nov_2003_00_54_21_-0600_W6A=9Vka/5SFm4wt Content-Type: multipart/mixed; boundary="Multipart=_Sun__16_Nov_2003_00_54_21_-0600_m9=MoSAEkmafmF7a" --Multipart=_Sun__16_Nov_2003_00_54_21_-0600_m9=MoSAEkmafmF7a Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Content-Transfer-Encoding: 7bit Have you read the Handbook on printing? Might wanna check this out for installing cups http://www.freebsdforums.com/forums/showthread.php?s=&threadid=15325 HTHs On Sat, 15 Nov 2003 21:03:34 -0500 Barry Skidmore wrote: > I am using FreeBSD-4.9-RELEASE on an i386 machine with cups-1.1.19. > > I have tried to add a networked HP JetDirect LaserJet printer using > both the cups web interface, and using "gnome-cups-manager" from the > ports collection. In both cases, when I reach the final step in > adding the printer I receive an "Internal Server Error" message, and > the printer is not added. > > In doing a Google search, I have found that many others have reported > this same error, but so far I have not found a solution. > > Any help is appreciated. > > Thanks, > Barry > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" --Multipart=_Sun__16_Nov_2003_00_54_21_-0600_m9=MoSAEkmafmF7a Content-Type: application/pgp-signature; name="00000000.mimetmp" Content-Disposition: attachment; filename="00000000.mimetmp" Content-Transfer-Encoding: base64 LS0tLS1CRUdJTiBQR1AgU0lHTkFUVVJFLS0tLS0KVmVyc2lvbjogR251UEcgdjEuMi4zIChGcmVl QlNEKQoKaUQ4REJRRS90eDR5am5PTDdkWW0vRVFSQXBUM0FLQ2swNEo3Sk9leXpjTzVOcDFFV1VQ SVNZazJ5Z0NneHU3KwpkQzhiQkZUV0JBOFMray93Q3BxNDNiMD0KPS9VQnAKLS0tLS1FTkQgUEdQ IFNJR05BVFVSRS0tLS0tCgo= --Multipart=_Sun__16_Nov_2003_00_54_21_-0600_m9=MoSAEkmafmF7a-- --Signature=_Sun__16_Nov_2003_00_54_21_-0600_W6A=9Vka/5SFm4wt Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/tx8hjnOL7dYm/EQRAtKWAJ0ebwF0TfKnrMxXwqg5fWGrLjUY1ACeNbWK ew7i3aOo8r3WublLamkwQhE= =PzzR -----END PGP SIGNATURE----- --Signature=_Sun__16_Nov_2003_00_54_21_-0600_W6A=9Vka/5SFm4wt--