Date: 25 Mar 2002 23:19:56 +1200 From: Mark Sergeant <msergeant@looksmart.net> To: mobile@FreeBSD.ORG Subject: Re: ATA flash card under 4-STABLE Message-ID: <1017055196.391.17.camel@xyzzy.intranet.snsonline.net> In-Reply-To: <20020325111715.GA4064@pir.net> References: <20020323.095546.35787265.imp@village.org> <Pine.LNX.4.44.0203251013250.9887-100000@scribble.fsn.hu> <20020325111715.GA4064@pir.net>
next in thread | previous in thread | raw e-mail | index | archive | help
My two cents worth all the flash cards should be set to 0x1 or make the "default" option smarter, took a wake up call from Warner before I figured out it was the default that was causing issues. Cheers, Mark On Mon, 2002-03-25 at 23:17, Peter Radcliffe wrote: > Attila Nagy <bra@fsn.hu> probably said: > > card "128MB" " " > > config 0x1 "ata" ? >=20 > > Could you please add this entry to /etc/defaults/pccard.conf? > > The card is a PQI 128 MB flash and the PCMCIA device is a PCM-3110. >=20 > Speaking of which, these are my pccard.conf entries that don't seem to ha= ve > made it into /etc/defaults/pccard.conf yet; >=20 >=20 > # Lexar CF - note one extra space than the /defaults/ entry. > card "CL ATA FLASH CARD LEXAR " "TIDALWV" > config 0x01 "ata" ? >=20 > # Xircom rebadged Aironet PC4800 11Mbps 802.11 wireless NIC > card "Xircom" "Wireless Ethernet Adapter" > config 0x5 "an" ? > insert /etc/pccard_ether $device start > remove /etc/pccard_ether $device stop >=20 > # simpletech smartmedia pcmcia adaptor > card " " " " > config 0x01 "ata" ? >=20 > P. >=20 > --=20 > pir pir-sig@pir.net pir-sig@net.tufts.edu >=20 >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message >=20 --=20 Mark Sergeant Senior Unix Systems Administrator =20 L=F4=F4kSmart International Pty. Ltd. Level 5/388 Lonsdale Street Melbourne, VIC, 3000 Australia=20 P. (03) 9648 2201=20 F. (03) 9648 2244=20 http://www.looksmart.com.au The referring document contains privileged and confidential information. If you are not the intended recipient you must not copy, distribute or take action with regards to the content, we request that you notify LookSmart International Pty. Ltd. immediately and remove all traces of this document.=20 Any views expressed in this message are those of the individual sender, except where they are specifically stated to be the views of LookSmart=20 International Pty. Ltd. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1017055196.391.17.camel>