Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 Mar 2011 21:55:23 -0400
From:      Mike Tancsa <mike@sentex.net>
To:        Steven Hartland <killing@multiplay.co.uk>
Cc:        freebsd-stable@freebsd.org, Jeremy Chadwick <freebsd@jdc.parodius.com>
Subject:   Re: deadlock or bad disk ?  RELENG_8
Message-ID:  <4D8D478B.7070504@sentex.net>
In-Reply-To: <68501F176ADC4FB1B492C59B34669F95@multiplay.co.uk>
References:  <20100719023419.GA91006@icarus.home.lan>	<201007190301.o6J31Hs1045607@lava.sentex.ca>	<20100719033424.GA92607@icarus.home.lan>	<201007191237.o6JCbmj7049339@lava.sentex.ca>	<20100719203320.GB21088@icarus.home.lan>	<011E0838F0EC4E80885646C70B34F8AB@multiplay.co.uk>	<4D8C9495.90103@sentex.net>	<716F58E43EA845E3A2228F020D85DFBB@multiplay.co.uk>	<20110325144124.GA29033@icarus.home.lan>	<E7D9912CFA4E4E9987BAA2CF5F3F6CA3@multiplay.co.uk>	<20110325215031.GA36689@icarus.home.lan> <68501F176ADC4FB1B492C59B34669F95@multiplay.co.uk>

next in thread | previous in thread | raw e-mail | index | archive | help
On 3/25/2011 9:28 PM, Steven Hartland wrote:
> 
> Interesting, camcontrol reports the following, so does that indicate it
> may be possible to do this:
> camcontrol devlist
> <Areca ARC-1220-VOL#00 R001>       at scbus0 target 0 lun 0 (da0,pass0)
> <Areca RAID controller R001>       at scbus0 target 16 lun 0 (pass1)
> 
> The suspected failing disk will be back in the office next week so
> we'll have a look and see what smart reports and post it.

It does get some info from the controller, but not the individual disks

 smartctl -a /dev/da0
smartctl 5.40 2010-10-16 r3189 [FreeBSD 8.2-PRERELEASE amd64] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

Device: Areca    usrvar           Version: R001
Serial number: 0000002992326304
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Fri Mar 25 21:50:19 2011 EDT
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK

Current Drive Temperature:     30 C
Drive Trip Temperature:        25 C
Manufactured in week 30 of year 2002
Specified cycle count over device lifetime:  4278190080
Accumulated start-stop cycles:  256
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction
Gigabytes    Total
               ECC          rereads/    errors   algorithm
processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9
bytes]  errors
read:          0        0         0         0          0          0.000
          0
write:         0        0         0         0          0          0.000
          0

Non-medium error count:        0
Device does not support Self Test logging


> 
> Currently the machine is now stable but its had ram replaced and this
> disk pulled so its not clear which solved the problem but at least its
> seems to be stable once again which is what really counts :)

On my card, I found the following firmware versions work quite well.

CLI> sys info
The System Information
===========================================
Main Processor     : 500MHz
CPU ICache Size    : 32KB
CPU DCache Size    : 32KB
CPU SCache Size    : 0KB
System Memory      : 128MB/333MHz/ECC
Firmware Version   : V1.44 2008-2-1
BOOT ROM Version   : V1.44 2008-1-28
Serial Number      : Y529CAAGAR000375
Controller Name    : ARC-1210
===========================================
GuiErrMsg<0x00>: Success.


	---Mike

-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D8D478B.7070504>