Date: Wed, 8 Jun 2011 04:13:05 +0000 From: John <jwd@slowblink.com> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-current@freebsd.org Subject: Re: NEW_PCIB? pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff Message-ID: <20110608041305.GA46490@FreeBSD.org> In-Reply-To: <201106071041.28654.jhb@freebsd.org> References: <20110606002353.GA2518@slowblink.com> <201106061051.30425.jhb@freebsd.org> <20110607013330.GA75754@FreeBSD.org> <201106071041.28654.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
----- John Baldwin's Original Message ----- > On Monday, June 06, 2011 9:33:30 pm John wrote: > > ----- John Baldwin's Original Message ----- > > > On Sunday, June 05, 2011 8:23:53 pm John wrote: > > > >=20 > > > > I just attempted to update an HP385G0 system from current as of > > > > 4-15-2011 to 6-2-2011. The new system will not boot, and shows the > > > > following message when it hangs: > >=20 > > I applied your patch/rebuilt/installed/rebooted. The system seems > > to get farther, but still locks up tight. A screen pic is here: > >=20 > > http://people.freebsd.org/~jwd/dmesg.jpg > >=20 >=20 > Hmmm, an MCA is not a good sign. >=20 > Yes, there are multiple ranges. Would it be possible to use a serial por= t to=20 > capture a full verbose dmesg up to the point where it hangs? >=20 > --=20 > John Baldwin Hi John Yes, I did get a serial console & ilo configured on the system today. I've attached two verbose consoles. The 1st is from -current as of today which fails to boot. The 2nd is from earlier this year which boot correctly. In looking at the output, I did the the following which I don't remember seeing previously, not sure if it's related: ACPI: RSDP 0xf4f20 00024 (v02 HP ) ACPI: XSDT 0xf57f83e0 00044 (v01 HP A05 00000002 ?? 0000162E) ACPI: FACP 0xf57f8460 000F4 (v03 HP A05 00000002 ?? 0000162E) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20= 110527/tbfadt-638) ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 (20= 110527/tbfadt-638) ACPI: DSDT 0xf57f8560 0422D (v01 HP DSDT 00000001 MSFT 02000001) Also, I tried to boot the system with ACPI disabled. The system booted farther, but then dropped into the debugger: device_attach: powernow0 attach returned 6 Device configuration finished. procfs registered panic: No usable event timer found! cpuid =3D 0 KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at kdb_enter+0x3b: movq $0,0x8dde12(%rip) db>=20 Just another datapoint... Let me know what else I can do to help. Thanks, John Failed boot 2011-06-07 -current ------------------------------- boot.config: -Dh BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 637kB/4021216kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (root@zfscarp1p.unx.sas.com, Tue Jun 7 20:32:05 EST 2011) Loading /boot/defaults/loader.conf=20 Warning: unable to open file /boot/loader.conf.local /boot/kernel/kernel text=3D0xb2e1e8 data=3D0x13b6a8+0x2821f0 syms=3D[0x8+0x= 102768+0x8+0xebac1] zpool_cache...failed! To get back to the menu, type `menu' and press ENTER or type `boot' and press ENTER to start FreeBSD. Type '?' for a list of commands, 'help' for more detailed help. OK lsmod 0x200000: /boot/kernel/kernel (elf kernel, 0x12d9cc0) args: -v modules: x86bios.1 hptrr.1 io.1 ufs.1 kernel_mac_support.4 krpc.1 nfslock= d.1 nfssvc.1 nfslock.1 wlan_sta.1 wlan_ratectl_none.1 wlan.1 wlan_wep.1 wla= n_tkip.1 wlan_ccmp.1 wlan_amrr.1 if_vlan.3 if_gif.1 if_firewire.1 if_faith.= 1 ether.1 sysvshm.1 sysvsem.1 sysvmsg.1 firmware.1 kernel.900038 cd9660.1 i= sa.1 pseudofs.1 procfs.1 nfsd.1 nfscl.1 nfs.1 nfscommon.1 msdosfs.1 wpi.1 u= sb_quirk.1 ums.1 ukbd.1 uhid.1 ucom.1 uvscom.1 uvisor.1 uslcom.1 uplcom.1 u= lpt.1 uipaq.1 uftdi.1 ubsa.1 uark.1 u3g.1 zyd.1 urtw.1 ural.1 if_upgt.1 uat= h.1 run.1 rum.1 uether.1 udav.1 rue.1 kue.1 cue.1 cdce.1 axe.1 aue.1 uhub.1= usb.1 usb_linux.1 urio.1 umass.1 siis.1 random.1 ppbus.1 pci.1 pccard.1 nu= ll.1 mwl.1 mvs.1 mpt_user.1 mpt_raid.1 mpt.1 mpt_cam.1 mpt_core.1 miibus.1 = mfi.1 mem.1 malo.1 iwn.1 iwi.1 isp.1 ipw.1 sbp.1 fwip.1 fwe.1 firewire.1 sp= lash.1 exca.1 dcons.2 dcons_crom.1 cardbus.1 bt.1 if_ath.1 ath_pci.1 ata_vi= a.1 ata_sis.1 ata_sii.1 ata_serverworks.1 ata_promise.1 ata_nvidia.1 ata_ne= tcell.1 ata_national.1 ata_micron.1 ata_marvell.1 ata_jmicron.1 ata_ite.1 a= ta_intel.1 ata_highpoint.1 ata_cyrix.1 ata_cypress.1 ata_cenatek.1 ata_ati.= 1 ata_amd.1 ata_adaptec.1 ata_ali.1 ata_acard.1 ata_ahci.1 atapci.1 ata.1 a= hc.1 ahd.1 ahd_pci.1 ahc_pci.1 ahc_isa.1 ahci.1 agp.1 acpi_pci.1 acpi.1 cam= .1=20 OK boot -v =20 GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009f400 SMAP type=3D02 base=3D000000000009f400 len=3D0000000000000c00 SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000 SMAP type=3D01 base=3D0000000000100000 len=3D00000000f56f8000 SMAP type=3D03 base=3D00000000f57f8000 len=3D0000000000008000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fec10000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fec20000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fdc00000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fdc10000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000010000 SMAP type=3D02 base=3D00000000ff800000 len=3D0000000000800000 SMAP type=3D01 base=3D0000000100000000 len=3D00000002fffff000 Table 'FACP' at 0xf57f8460 Table 'APIC' at 0xf57f8100 APIC: Found table at 0xf57f8100 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled MADT: Found CPU APIC ID 4 ACPI ID 4: disabled MADT: Found CPU APIC ID 5 ACPI ID 5: disabled MADT: Found CPU APIC ID 6 ACPI ID 6: disabled MADT: Found CPU APIC ID 7 ACPI ID 7: disabled Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0: Tue Jun 7 21:16:17 EST 2011 root@zfscarp1p.unx.sas.com:/usr/obj/usr/src.2011-06-07_1.00/sys/GENERIC= amd64 WARNING: WITNESS option enabled, expect reduced performance. Table 'FACP' at 0xf57f8460 Table 'APIC' at 0xf57f8100 Table 'SPCR' at 0xf57f81e0 Table 'SRAT' at 0xf57f8260 SRAT: Found table at 0xf57f8260 SRAT: Found CPU APIC ID 0 domain 1: enabled SRAT: Found CPU APIC ID 1 domain 2: enabled SRAT: Found CPU APIC ID 2 domain 3: disabled SRAT: Found CPU APIC ID 3 domain 4: disabled SRAT: Found CPU APIC ID 4 domain 1: disabled SRAT: Found CPU APIC ID 5 domain 2: disabled SRAT: Found CPU APIC ID 6 domain 3: disabled SRAT: Found CPU APIC ID 7 domain 4: disabled SRAT: Found memory domain 1 addr 0 len 200000000: enabled SRAT: Found memory domain 2 addr 200000000 len 200000000: enabled SRAT: Found memory domain 3 addr 0 len 0: disabled SRAT: Found memory domain 4 addr 0 len 0: disabled Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff814db000. Calibrating TSC clock ... TSC clock: 2605965145 Hz CPU: AMD Opteron(tm) Processor 252 (2605.97-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20f51 Family =3D f Model =3D 25 St= epping =3D 1 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associat= ive L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associati= ve WARNING: This architecture revision has known SMP hardware bugs which may c= ause random instability real memory =3D 17179869184 (16384 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x0000000001516000 - 0x00000000f57f7fff, 4096663552 bytes (1000162 pages) 0x0000000100000000 - 0x00000003e1eaefff, 12380205056 bytes (3022511 pages) avail memory =3D 16372883456 (15614 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HP 00000083> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 SRAT: CPU 0 has memory domain 1 SRAT: CPU 1 has memory domain 2 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x001000-0x001fff at 0xffffff8000236000 x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf4f20 00024 (v02 HP ) ACPI: XSDT 0xf57f83e0 00044 (v01 HP A05 00000002 ?? 0000162E) ACPI: FACP 0xf57f8460 000F4 (v03 HP A05 00000002 ?? 0000162E) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20= 110527/tbfadt-638) ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 (20= 110527/tbfadt-638) ACPI: DSDT 0xf57f8560 0422D (v01 HP DSDT 00000001 MSFT 02000001) ACPI: FACS 0xf57f80c0 00040 ACPI: APIC 0xf57f8100 000B8 (v01 HP 00000083 00000002 00000000) ACPI: SPCR 0xf57f81e0 00050 (v01 HP SPCRRBSU 00000001 ?? 0000162E) ACPI: SRAT 0xf57f8260 00150 (v01 HP A05 00000001 00000000) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 5, Interrupt 24 at 0xfec10000 MADT: Found IO APIC ID 6, Interrupt 28 at 0xfec20000 MADT: Found IO APIC ID 7, Interrupt 32 at 0xfdc00000 MADT: Found IO APIC ID 8, Interrupt 36 at 0xfdc10000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard ioapic3 <Version 1.1> irqs 32-35 on motherboard ioapic4 <Version 1.1> irqs 36-39 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 CPU0: local APIC error 0x80 acpi0: <HP A05> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: SSDT 0xf57fd000 0059D (v01 HP SSDT0 00000001 MSFT 02000001) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0059D (v01 HP SSDT0 00000001 MSFT 02000001) ACPI: SSDT 0xf57fd700 0059D (v01 HP SSDT1 00000001 MSFT 02000001) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0059D (v01 HP SSDT1 00000001 MSFT 02000001) acpi0: Power Button (fixed) ACPI timer: 1/1 1/2 1/1 1/1 1/2 1/1 1/1 1/2 1/1 0/4 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 5 7 10 11 Validation 0 7 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 5 7 10 11 Validation 0 10 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 5 7 10 11 Validation 0 11 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 5 7 10 11 Validation 0 5 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1022, dev=3D0x7460, revid=3D0x07 domain=3D0, bus=3D0, slot=3D3, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x09 (2250 ns), maxlat=3D0x00 (0 ns) [EOT] Good boot 2011-04-xx -current ------------------------------- /boot.config: -Dh Consoles: internal video/keyboard serial port =20 BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 637kB/4021216kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (root@zfscarp1p.unx.sas.com, Tue Jun 7 20:32:05 EST 2011) Loading /boot/defaults/loader.conf=20 Warning: unable to open file /boot/loader.conf.local /boot/kernel/kernel text=3D0xb2e1e8 data=3D0x13b6a8+0x2821f0 syms=3D[0x8+0x= 102768+0x8+0xebac1] zpool_cache...failed! To get back to the menu, type `menu' and press ENTER or type `boot' and press ENTER to start FreeBSD. Type '?' for a list of commands, 'help' for more detailed help. OK unload=20 OK load /boot/kernel.good/kernel /boot/kernel.good/kernel text=3D0x97092f data=3D0x1391a8+0xe2598 syms=3D[0x= 8+0xefa90+0x8+0xdbf13] OK boot -v GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009f400 SMAP type=3D02 base=3D000000000009f400 len=3D0000000000000c00 SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000 SMAP type=3D01 base=3D0000000000100000 len=3D00000000f56f8000 SMAP type=3D03 base=3D00000000f57f8000 len=3D0000000000008000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fec10000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fec20000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fdc00000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fdc10000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000010000 SMAP type=3D02 base=3D00000000ff800000 len=3D0000000000800000 SMAP type=3D01 base=3D0000000100000000 len=3D00000002fffff000 Table 'FACP' at 0xf57f8460 Table 'APIC' at 0xf57f8100 APIC: Found table at 0xf57f8100 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled MADT: Found CPU APIC ID 4 ACPI ID 4: disabled MADT: Found CPU APIC ID 5 ACPI ID 5: disabled MADT: Found CPU APIC ID 6 ACPI ID 6: disabled MADT: Found CPU APIC ID 7 ACPI ID 7: disabled Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT-201101 #0: Mon Jun 6 03:17:15 EST 2011 root@zfscarp1p.unx.sas.com:/usr/obj/usr/src.orig/sys/ZFS amd64 Table 'FACP' at 0xf57f8460 Table 'APIC' at 0xf57f8100 Table 'SPCR' at 0xf57f81e0 Table 'SRAT' at 0xf57f8260 SRAT: Found table at 0xf57f8260 SRAT: Found CPU APIC ID 0 domain 1: enabled SRAT: Found CPU APIC ID 1 domain 2: enabled SRAT: Found CPU APIC ID 2 domain 3: disabled SRAT: Found CPU APIC ID 3 domain 4: disabled SRAT: Found CPU APIC ID 4 domain 1: disabled SRAT: Found CPU APIC ID 5 domain 2: disabled SRAT: Found CPU APIC ID 6 domain 3: disabled SRAT: Found CPU APIC ID 7 domain 4: disabled SRAT: Found memory domain 1 addr 0 len 200000000: enabled SRAT: Found memory domain 2 addr 200000000 len 200000000: enabled SRAT: Found memory domain 3 addr 0 len 0: disabled SRAT: Found memory domain 4 addr 0 len 0: disabled Preloaded elf kernel "/boot/kernel.good/kernel" at 0xffffffff80f5a000. Calibrating TSC clock ... TSC clock: 2605961453 Hz CPU: AMD Opteron(tm) Processor 252 (2605.96-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x20f51 Family =3D f Model =3D 25 St= epping =3D 1 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x1<SSE3> AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associat= ive L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associati= ve WARNING: This architecture revision has known SMP hardware bugs which may c= ause random instability real memory =3D 17179869184 (16384 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000f95000 - 0x00000000f57f7fff, 4102434816 bytes (1001571 pages) 0x0000000100000000 - 0x00000003e1e88fff, 12380049408 bytes (3022473 pages) avail memory =3D 16376524800 (15617 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HP 00000083> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 SRAT: CPU 0 has memory domain 1 SRAT: CPU 1 has memory domain 2 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x001000-0x001fff at 0xffffff8000036000 x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf4f20 00024 (v02 HP ) ACPI: XSDT 0xf57f83e0 00044 (v01 HP A05 00000002 ?? 0000162E) ACPI: FACP 0xf57f8460 000F4 (v03 HP A05 00000002 ?? 0000162E) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20= 101209/tbfadt-707) ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 (20= 101209/tbfadt-707) ACPI: DSDT 0xf57f8560 0422D (v01 HP DSDT 00000001 MSFT 02000001) ACPI: FACS 0xf57f80c0 00040 ACPI: APIC 0xf57f8100 000B8 (v01 HP 00000083 00000002 00000000) ACPI: SPCR 0xf57f81e0 00050 (v01 HP SPCRRBSU 00000001 ?? 0000162E) ACPI: SRAT 0xf57f8260 00150 (v01 HP A05 00000001 00000000) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 5, Interrupt 24 at 0xfec10000 MADT: Found IO APIC ID 6, Interrupt 28 at 0xfec20000 MADT: Found IO APIC ID 7, Interrupt 32 at 0xfdc00000 MADT: Found IO APIC ID 8, Interrupt 36 at 0xfdc10000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard ioapic3 <Version 1.1> irqs 32-35 on motherboard ioapic4 <Version 1.1> irqs 36-39 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 CPU0: local APIC error 0x80 acpi0: <HP A05> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: SSDT 0xf57fd000 0059D (v01 HP SSDT0 00000001 MSFT 02000001) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0059D (v01 HP SSDT0 00000001 MSFT 02000001) ACPI: SSDT 0xf57fd700 0059D (v01 HP SSDT1 00000001 MSFT 02000001) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0059D (v01 HP SSDT1 00000001 MSFT 02000001) acpi0: Power Button (fixed) ACPI timer: 0/4 0/4 0/4 0/4 0/4 0/4 0/4 1/2 1/2 1/2 -> 3 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 5 7 10 11 Validation 0 7 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 5 7 10 11 Validation 0 10 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 5 7 10 11 Validation 0 11 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 5 7 10 11 Validation 0 5 N 0 3 5 7 10 11 After Disable 0 255 N 0 3 5 7 10 11 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1022, dev=3D0x7460, revid=3D0x07 domain=3D0, bus=3D0, slot=3D3, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x09 (2250 ns), maxlat=3D0x00 (0 ns) ^^^^^^^^ previous dmesg output ends here ^^^^^^^ found-> vendor=3D0x1022, dev=3D0x7468, revid=3D0x05 domain=3D0, bus=3D0, slot=3D4, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7469, revid=3D0x03 domain=3D0, bus=3D0, slot=3D4, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[20]: type I/O Port, range 32, base 0x2000, size 4, enabled found-> vendor=3D0x1022, dev=3D0x746b, revid=3D0x05 domain=3D0, bus=3D0, slot=3D4, func=3D3 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7450, revid=3D0x12 domain=3D0, bus=3D0, slot=3D7, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7451, revid=3D0x01 domain=3D0, bus=3D0, slot=3D7, func=3D1 class=3D08-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7450, revid=3D0x12 domain=3D0, bus=3D0, slot=3D8, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7451, revid=3D0x01 domain=3D0, bus=3D0, slot=3D8, func=3D1 class=3D08-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00 domain=3D0, bus=3D0, slot=3D25, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00 domain=3D0, bus=3D0, slot=3D25, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00 domain=3D0, bus=3D0, slot=3D25, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00 domain=3D0, bus=3D0, slot=3D25, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xf5f00000-0xf7cfffff pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1022, dev=3D0x7464, revid=3D0x0b domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0117, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns) intpin=3Dd, irq=3D5 map[10]: type Memory, range 32, base 0xf7cf0000, size 12, enabled pcib1: requested memory range 0xf7cf0000-0xf7cf0fff: good pcib1: matched entry for 1.0.INTD pcib1: slot 0 INTD hardwired to IRQ 19 ohci early: SMM active, request owner change found-> vendor=3D0x1022, dev=3D0x7464, revid=3D0x0b domain=3D0, bus=3D1, slot=3D0, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x50 (20000 ns) intpin=3Dd, irq=3D5 map[10]: type Memory, range 32, base 0xf7ce0000, size 12, enabled pcib1: requested memory range 0xf7ce0000-0xf7ce0fff: good pcib1: matched entry for 1.0.INTD pcib1: slot 0 INTD hardwired to IRQ 19 ohci early: SMM active, request owner change found-> vendor=3D0x0e11, dev=3D0xb203, revid=3D0x01 domain=3D0, bus=3D1, slot=3D2, func=3D0 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0103, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x4800, size 8, enabled pcib1: requested I/O range 0x4800-0x48ff: in range map[14]: type Memory, range 32, base 0xf7cb0000, size 9, enabled pcib1: requested memory range 0xf7cb0000-0xf7cb01ff: good pcib1: matched entry for 1.2.INTA pcib1: slot 2 INTA hardwired to IRQ 16 found-> vendor=3D0x0e11, dev=3D0xb204, revid=3D0x01 domain=3D0, bus=3D1, slot=3D2, func=3D2 class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0197, statreg=3D0x0290, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x4000, size 8, enabled pcib1: requested I/O range 0x4000-0x40ff: in range map[14]: type Memory, range 32, base 0xf7ca0000, size 11, enabled pcib1: requested memory range 0xf7ca0000-0xf7ca07ff: good map[18]: type Memory, range 32, base 0xf7c90000, size 13, enabled pcib1: requested memory range 0xf7c90000-0xf7c91fff: good map[1c]: type Memory, range 32, base 0xf7c00000, size 19, enabled pcib1: requested memory range 0xf7c00000-0xf7c7ffff: good pcib1: matched entry for 1.2.INTB pcib1: slot 2 INTB hardwired to IRQ 17 found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27 domain=3D0, bus=3D1, slot=3D3, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf6000000, size 24, enabled pcib1: requested memory range 0xf6000000-0xf6ffffff: good map[14]: type I/O Port, range 32, base 0x4400, size 8, enabled pcib1: requested I/O range 0x4400-0x44ff: in range map[18]: type Memory, range 32, base 0xf5ff0000, size 12, enabled pcib1: requested memory range 0xf5ff0000-0xf5ff0fff: good ohci0: <OHCI (generic) USB controller> mem 0xf7cf0000-0xf7cf0fff irq 19 at = device 0.0 on pci1 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 49 usbus0: <OHCI (generic) USB controller> on ohci0 usbus0: bpf attached ohci0: usbpf attached ohci1: <OHCI (generic) USB controller> mem 0xf7ce0000-0xf7ce0fff irq 19 at = device 0.1 on pci1 usbus1: <OHCI (generic) USB controller> on ohci1 usbus1: bpf attached ohci1: usbpf attached pci1: <base peripheral> at device 2.0 (no driver attached) pci1: <base peripheral> at device 2.2 (no driver attached) vgapci0: <VGA-compatible display> port 0x4400-0x44ff mem 0xf6000000-0xf6fff= fff,0xf5ff0000-0xf5ff0fff at device 3.0 on pci1 isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0= x376,0x2000-0x200f at device 4.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 50 ata1: <ATA channel 1> on atapci0 ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 51 pci0: <bridge> at device 4.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x5000-0x5fff pcib2: memory decode 0xf7d00000-0xf7dfffff pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x0e11, dev=3D0x0046, revid=3D0x01 domain=3D0, bus=3D2, slot=3D4, func=3D0 class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 powerspec 2 supports D0 D1 D3 current D0 map[10]: type Memory, range 64, base 0xf7df0000, size 13, enabled pcib2: requested memory range 0xf7df0000-0xf7df1fff: good map[18]: type I/O Port, range 32, base 0x5000, size 8, enabled pcib2: requested I/O range 0x5000-0x50ff: in range map[1c]: type Memory, range 64, base 0xf7d80000, size 18, enabled pcib2: requested memory range 0xf7d80000-0xf7dbffff: good pcib2: matched entry for 2.4.INTA pcib2: slot 4 INTA hardwired to IRQ 24 ciss0: <HP Smart Array 6i> port 0x5000-0x50ff mem 0xf7df0000-0xf7df1fff,0xf= 7d80000-0xf7dbffff irq 24 at device 4.0 on pci2 ciss0: PERFORMANT Transport ciss0: got 0 MSI messages] ioapic1: routing intpin 0 (PCI IRQ 24) to lapic 0 vector 52 ciss0: using 1024 of 1024 available commands ciss0: firmware 2.84 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0x80000006<simple,performant> ciss0: active I/O method 0x5<performant> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 0us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x4 ciss0: server name '' ciss0: heartbeat 0x10000075 ciss0: 7 physical devices ciss0: 1 logical drive ciss0: logical drive (b0t0): RAID 5, 277504MB online pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xfffff000-0xfff pcib3: memory decode 0xf7e00000-0xf7efffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10 domain=3D0, bus=3D3, slot=3D6, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xf7ef0000, size 16, enabled pcib3: requested memory range 0xf7ef0000-0xf7efffff: good pcib3: matched entry for 3.6.INTA pcib3: slot 6 INTA hardwired to IRQ 28 found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10 domain=3D0, bus=3D3, slot=3D6, func=3D1 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xf7ee0000, size 16, enabled pcib3: requested memory range 0xf7ee0000-0xf7eeffff: good pcib3: matched entry for 3.6.INTB pcib3: slot 6 INTB hardwired to IRQ 29 pci0:3:6:0: bad VPD cksum, remain 19 bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xf7ef0000= -0xf7efffff irq 28 at device 6.0 on pci3 bge0: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0019, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba= seT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: 00:16:35:3b:7b:52 ioapic2: routing intpin 0 (PCI IRQ 28) to lapic 0 vector 53 pci0:3:6:1: bad VPD cksum, remain 19 bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xf7ee0000= -0xf7eeffff irq 29 at device 6.1 on pci3 bge1: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: OUI 0x000818, model 0x0019, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba= seT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: bpf attached bge1: Ethernet address: 00:16:35:3b:7b:51 ioapic2: routing intpin 1 (PCI IRQ 29) to lapic 0 vector 54 pcib4: <ACPI Host-PCI bridge> on acpi0 pcib4: could not get PCI interrupt routing table for \_SB_.CFG1 - AE_NOT_FO= UND pci4: <ACPI PCI bus> on pcib4 pci4: domain=3D0, physical bus=3D4 found-> vendor=3D0x1022, dev=3D0x7450, revid=3D0x12 domain=3D0, bus=3D4, slot=3D9, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7451, revid=3D0x01 domain=3D0, bus=3D4, slot=3D9, func=3D1 class=3D08-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7450, revid=3D0x12 domain=3D0, bus=3D4, slot=3D10, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x7451, revid=3D0x01 domain=3D0, bus=3D4, slot=3D10, func=3D1 class=3D08-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci4 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x6000-0x6fff pcib5: memory decode 0xf7f00000-0xf7ffffff pcib5: no prefetched decode pci5: <ACPI PCI bus> on pcib5 pci5: domain=3D0, physical bus=3D5 found-> vendor=3D0x1077, dev=3D0x2312, revid=3D0x02 domain=3D0, bus=3D5, slot=3D7, func=3D0 class=3D0c-04-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type I/O Port, range 32, base 0x6000, size 8, enabled pcib5: requested I/O range 0x6000-0x60ff: in range map[14]: type Memory, range 64, base 0xf7ff0000, size 12, enabled pcib5: requested memory range 0xf7ff0000-0xf7ff0fff: good pcib5: matched entry for 5.7.INTA pcib5: slot 7 INTA hardwired to IRQ 34 found-> vendor=3D0x1077, dev=3D0x2312, revid=3D0x02 domain=3D0, bus=3D5, slot=3D7, func=3D1 class=3D0c-04-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type I/O Port, range 32, base 0x6400, size 8, enabled pcib5: requested I/O range 0x6400-0x64ff: in range map[14]: type Memory, range 64, base 0xf7fe0000, size 12, enabled pcib5: requested memory range 0xf7fe0000-0xf7fe0fff: good pcib5: matched entry for 5.7.INTB pcib5: slot 7 INTB hardwired to IRQ 35 found-> vendor=3D0x1077, dev=3D0x2312, revid=3D0x02 domain=3D0, bus=3D5, slot=3D8, func=3D0 class=3D0c-04-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type I/O Port, range 32, base 0x6800, size 8, enabled pcib5: requested I/O range 0x6800-0x68ff: in range map[14]: type Memory, range 64, base 0xf7fd0000, size 12, enabled pcib5: requested memory range 0xf7fd0000-0xf7fd0fff: good pcib5: matched entry for 5.8.INTA pcib5: slot 8 INTA hardwired to IRQ 32 found-> vendor=3D0x1077, dev=3D0x2312, revid=3D0x02 domain=3D0, bus=3D5, slot=3D8, func=3D1 class=3D0c-04-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type I/O Port, range 32, base 0x6c00, size 8, enabled pcib5: requested I/O range 0x6c00-0x6cff: in range map[14]: type Memory, range 64, base 0xf7fc0000, size 12, enabled pcib5: requested memory range 0xf7fc0000-0xf7fc0fff: good pcib5: matched entry for 5.8.INTB pcib5: slot 8 INTB hardwired to IRQ 33 Qlogic ISP Driver, FreeBSD Version 7.0, Core Version 7.0 isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6000-0x60ff mem 0xf7ff0000= -0xf7ff0fff irq 34 at device 7.0 on pci5 isp0: using Memory space register mapping ioapic3: routing intpin 2 (PCI IRQ 34) to lapic 0 vector 55 isp0: Polled Mailbox Command (0x2) Timeout (1000000us) (started @ isp_reset= :953) isp0: Polled Mailbox Command (0x8) Timeout (100000us) (started @ isp_reset:= 1017) isp0: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT) device_attach: isp0 attach returned 6 isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6400-0x64ff mem 0xf7fe0000= -0xf7fe0fff irq 35 at device 7.1 on pci5 isp1: using Memory space register mapping ioapic3: routing intpin 3 (PCI IRQ 35) to lapic 0 vector 55 isp1: Polled Mailbox Command (0x2) Timeout (1000000us) (started @ isp_reset= :953) isp1: Polled Mailbox Command (0x8) Timeout (100000us) (started @ isp_reset:= 1017) isp1: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT) device_attach: isp1 attach returned 6 isp2: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6800-0x68ff mem 0xf7fd0000= -0xf7fd0fff irq 32 at device 8.0 on pci5 isp2: using Memory space register mapping ioapic3: routing intpin 0 (PCI IRQ 32) to lapic 0 vector 55 isp2: Polled Mailbox Command (0x2) Timeout (1000000us) (started @ isp_reset= :953) isp2: Polled Mailbox Command (0x8) Timeout (100000us) (started @ isp_reset:= 1017) isp2: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT) device_attach: isp2 attach returned 6 isp3: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x6c00-0x6cff mem 0xf7fc0000= -0xf7fc0fff irq 33 at device 8.1 on pci5 isp3: using Memory space register mapping ioapic3: routing intpin 1 (PCI IRQ 33) to lapic 0 vector 55 isp3: Polled Mailbox Command (0x2) Timeout (1000000us) (started @ isp_reset= :953) isp3: Polled Mailbox Command (0x8) Timeout (100000us) (started @ isp_reset:= 1017) isp3: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT) device_attach: isp3 attach returned 6 pcib6: <ACPI PCI-PCI bridge> at device 10.0 on pci4 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0xfffff000-0xfff pcib6: no prefetched decode pci6: <ACPI PCI bus> on pcib6 pci6: domain=3D0, physical bus=3D6 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 55 Event timer "i8254" frequency 1193182 Hz quality 100 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58 uart0: fast interrupt uart0: console (9600,n,8,1) fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 59 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 acpi0: wakeup code va 0xffffff847878c000 pa 0x4000 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it attimer: attimer0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0x= effff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment= 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 60 Event timer "RTC" frequency 32768 Hz quality 0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq = 3 on isa0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 61 uart1: fast interrupt isa_probe_children: probing PnP devices powernow0: <Cool`n'Quiet K8> on cpu0 powernow1: <Cool`n'Quiet K8> on cpu1 Device configuration finished. procfs registered Timecounter "TSC" frequency 2605961453 Hz quality -100 lapic: Divisor 2, Frequency 100229294 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <AMD> at usbus0 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <AMD> at usbus1 uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 fdc0: output ready timeout uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire acd0: setting UDMA33 acd0: <HL-DT-STDVD-ROM GDR-8084N/3.00> DVDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 2048KB buffer, UDMA33=20 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout pass0 at ciss0 bus 0 scbus0 target 0 lun 0 pass0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-4 device=20 pass0: 135.168MB/s transfers pass0: Command Queueing enabled da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-4 device=20 da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 277841MB (569018880 512 byte sectors: 255H 32S/T 65535C) ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (CPU1: local APIC error 0x80 IfSlAo wItRaQb l1e) ctloe alnaepri cs t1a rvteecdto r 48 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 49 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 50 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 51 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 52 ioapic2: routing intpin 0 (PCI IRQ 28) to lapic 1 vector 53 GEOM: new disk da0 Trying to mount root from ufs:/dev/da0s1a [rw]... start_init: trying /sbin/init Setting hostuuid: 33383236-3038-5553-4535-35324e324e35. Setting hostid: 0xcd554986. Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: /dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1a: clean, 3486137 free (1153 frags, 435623 blocks, 0.0% fragmenta= tion) /dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1e: clean, 7897707 free (115 frags, 987199 blocks, 0.0% fragmentat= ion) /dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1f: clean, 87458558 free (322134 frags, 10892053 blocks, 0.3% frag= mentation) /dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1d: clean, 8085862 free (622 frags, 1010655 blocks, 0.0% fragmenta= tion) Mounting local file systems:. Setting hostname: zfscarp1p.unx.sas.com. carp1: bpf attached carp2: bpf attached ifconfig: can't set link-level netmask or broadcast bge0: link state changed to DOWNifconfig: can't set link-l evel netmask or broadcast bge1: link state changed to DOWifconfig: Ncan't set link-level netmask or= =20 broadcast ifconfig: can't set link-level netmask or broadcast Starting Network: lo0 bge0 bge1 carp1 carp2. lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3D3<RXCSUM,TXCSUM> bge0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTAT= E> ether 00:16:35:3b:7b:52 media: Ethernet autoselect (none) status: no carrier bge1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTAT= E> ether 00:16:35:3b:7b:51 media: Ethernet autoselect (none) status: no carrier carp1: flags=3D9<UP,LOOPBACK> metric 0 mtu 1500 carp: INIT vhid 1 advbase 1 advskew 100 carp2: flags=3D9<UP,LOOPBACK> metric 0 mtu 1500 carp: INIT vhid 2 advbase 1 advskew 100 Starting devd. [EOT]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110608041305.GA46490>