Date: Mon, 11 Feb 2008 13:22:24 -0700 From: Elliot Finley <lists@efinley.com> To: freebsd-current@freebsd.org Subject: 7.0RC2 + amd64 + PE2950 = dump hangs reliably Message-ID: <7ab1r39h65dkk7rk8ucnnqtu21s4ftq5qs@4ax.com>
next in thread | raw e-mail | index | archive | help
I'm on a Dell PowerEdge 2950 doing a dump to an NFS mount. Almost
without fail, the dump will hang part way through, making it
impossible to make a backup (using dump anyway).
Any pointers would be appreciated.
Here is the dmesg from the machine:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
=46reeBSD is a registered trademark of The FreeBSD Foundation.
=46reeBSD 7.0-RC2 #3: Mon Feb 11 12:49:31 MST 2008
root@zabbix.etv.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1597.53-MHz
K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6f6 Stepping =3D 6
=46eatures=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
=46eatures2=3D0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,=
DCA>
AMD Features=3D0x20100800<SYSCALL,NX,LM>
AMD Features2=3D0x1<LAHF>
Cores per package: 2
usable memory =3D 4281831424 (4083 MB)
avail memory =3D 4120473600 (3929 MB)
ACPI APIC Table: <DELL PE_SC3 >
=46reeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci6: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: Ethernet address: 00:19:b9:b8:6a:df
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pci10: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pci11: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib8
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff
irq 78 at device 14.0 on pci2
mfi0: Megaraid SAS driver Ver 2.00
mfi0: 3474 (256047942s/0x0020/0) - Shutdown command received from host
mfi0: 3475 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028
0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 3476 (4278190080s/0x0020/0) - Type 18: Firmware version
1.03.10-0216
mfi0: 3477 (4278190099s/0x0008/0) - Battery Present
mfi0: 3478 (4278190100s/0x0020/0) - Type 18: Package version
5.1.1-0040
mfi0: 3479 (4278190127s/0x0004/0) - PD 08(e1/s255) event: Enclosure
(SES) discovered on PD 08(e1/s255)
mfi0: 3480 (4278190127s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD
08(e1/s255)
mfi0: 3481 (4278190127s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255)
Info: enclPd=3D08, scsiType=3Dd, portMap=3D00,
sasAddr=3D50019090c0d7da00,0000000000000000
mfi0: 3482 (4278190127s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD
00(e1/s0)
mfi0: 3483 (4278190127s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0)
Info: enclPd=3D08, scsiType=3D0, portMap=3D01,
sasAddr=3D5000c50003928fd5,0000000000000000
mfi0: 3484 (4278190127s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD
01(e1/s1)
mfi0: 3485 (4278190127s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1)
Info: enclPd=3D08, scsiType=3D0, portMap=3D02,
sasAddr=3D5000c50003929765,0000000000000000
mfi0: 3486 (4278190127s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD
02(e1/s2)
mfi0: 3487 (4278190127s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2)
Info: enclPd=3D08, scsiType=3D0, portMap=3D04,
sasAddr=3D5000c50003922b81,0000000000000000
mfi0: 3488 (4278190127s/0x0002/0) - PD 03(e1/s3) event: Inserted: PD
03(e1/s3)
mfi0: 3489 (4278190127s/0x0002/0) - Type 29: Inserted: PD 03(e1/s3)
Info: enclPd=3D08, scsiType=3D0, portMap=3D08,
sasAddr=3D5000c500039296d5,0000000000000000
mfi0: 3490 (4278190127s/0x0002/0) - PD 04(e1/s4) event: Inserted: PD
04(e1/s4)
mfi0: 3491 (4278190127s/0x0002/0) - Type 29: Inserted: PD 04(e1/s4)
Info: enclPd=3D08, scsiType=3D0, portMap=3D10,
sasAddr=3D5000c50003929e95,0000000000000000
mfi0: 3492 (4278190127s/0x0002/0) - PD 05(e1/s5) event: Inserted: PD
05(e1/s5)
mfi0: 3493 (4278190127s/0x0002/0) - Type 29: Inserted: PD 05(e1/s5)
Info: enclPd=3D08, scsiType=3D0, portMap=3D20,
sasAddr=3D5000c50003929d81,0000000000000000
mfi0: 3494 (4278190128s/0x0042/0) - Type 22: Dedicated Hot Spare
created on PD 05(e1/s5) (ded,rev,ac=3D1)
mfi0: 3495 (256050363s/0x0020/0) - Adapter ticks 256050363 elapsed
48s: Time established as 02/11/08 13:06:03; (48 seconds since power
on)
mfi0: [ITHREAD]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pci13: <PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci14: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 7.0 on pci0
pci15: <PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib15
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce1: Ethernet address: 00:19:b9:b8:6a:dd
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0xdce0-0xdcff irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0xdcc0-0xdcdf irq 20 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0xdca0-0xdcbf irq 21 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc600400-0xfc6007ff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr
2> on uhub3
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4
kbd2 at ukbd0
ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub4
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4
umass1: <DELL INC. DRAC5 VIRTUAL MEDIA, class 0/0, rev 2.00/0.00,
addr 4> on uhub4
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr
5> on uhub3
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci16: <ACPI PCI bus> on pcib16
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem
0xd0000000-0xd7ffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on
pci16
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1
kbd3 at ukbd1
ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2>
on uhub1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> at ata0-master UDMA33
mfi0: 3496 (256050419s/0x0008/0) - Battery temperature is normal
mfi0: 3497 (256050419s/0x0008/0) - Current capacity of the battery is
above threshold
mfid0: <MFI Logical Disk> on mfi0
mfid0: 557568MB (1141899264 sectors) RAID volume 'AR0' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <Dell Virtual Floppy 123> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not
present
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <Dell Virtual CDROM 123> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present
Trying to mount root from ufs:/dev/mfid0s1a
IP Filter: v4.1.28 initialized. Default =3D pass all, Logging =3D =
enabled
bce0: link state changed to UP
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xffffffffb496c010, 0)
error 19
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7ab1r39h65dkk7rk8ucnnqtu21s4ftq5qs>