Date: Tue, 03 Jun 2008 16:34:13 +0200 From: Svein Skogen <svein@d80.iso100.no> To: gavin@FreeBSD.org Cc: freebsd-www@FreeBSD.org Subject: Re: www/121054: http://www.freebsd.org/platforms/amd64/motherboards.html Message-ID: <48455665.9040600@d80.iso100.no> In-Reply-To: <200806022308.m52N8alt061626@freefall.freebsd.org> References: <200806022308.m52N8alt061626@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enigC49012C91F1ECFA49CBDEAA4 Content-Type: multipart/mixed; boundary="------------050301090108010504020305" This is a multi-part message in MIME format. --------------050301090108010504020305 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable gavin@FreeBSD.org wrote: > Synopsis: http://www.freebsd.org/platforms/amd64/motherboards.html >=20 > State-Changed-From-To: open->feedback > State-Changed-By: gavin > State-Changed-When: Mon Jun 2 23:08:07 UTC 2008 > State-Changed-Why:=20 > To submitter: Is there any chance you could provide a dmesg > from this system? >=20 >=20 > Responsible-Changed-From-To: freebsd-www->gavin > Responsible-Changed-By: gavin > Responsible-Changed-When: Mon Jun 2 23:08:07 UTC 2008 > Responsible-Changed-Why:=20 > I'm putting together a patch for these >=20 > http://www.freebsd.org/cgi/query-pr.cgi?pr=3D121054 dmesg.boot attached. :) //Svein --=20 Svein Skogen | svein@d80.iso100.no Solberg =D8stli 9 | PGP Key: 0xE5E76831 2020 Skedsmokorset | svein@jernhuset.no Norway | PGP Key: 0xCE96CE13 ------------------------+----------------------------- msn messenger: | Mobile Phone: +47 907 03 575 svein@jernhuset.no | RIPE handle: SS16503-RIPE --------------050301090108010504020305 Content-Type: text/plain; name="dmesg.boot" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline; filename="dmesg.boot" Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #12: Sun May 4 13:11:55 CEST 2008 svein@d80.iso100.no:/usr/obj/usr/src/sys/SVEIN-LAB Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz K8-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x50ff2 Stepping =3D 2 Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P= GE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=3D0x2001<SSE3,CX16> AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow= !> AMD Features2=3D0x1d<LAHF,SVM,ExtAPIC,CR8> usable memory =3D 2116751360 (2018 MB) avail memory =3D 2041245696 (1946 MB) ACPI APIC Table: <A_M_I OEMAPIC > ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413= ) acpi0: <A_M_I OEMRSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a= cpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 device_attach: powernow0 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0xcc00-0xcc3f,0x5000-0x50= 3f,0x6000-0x603f irq 20 at device 1.1 on pci0 smbus0: <System Management Bus> on nfsmb0 nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0 smbus1: <System Management Bus> on nfsmb1 pci0: <memory, RAM> at device 1.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xdfaff000-0xdfafffff irq 21 a= t device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfafec00-0xdfafecff irq = 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 10 ports with 10 removable, self powered umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.26, addr 2> o= n uhub1 pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xdfbff000= -0xdfbfffff irq 16 at device 8.0 on pci1 ahc0: [ITHREAD] aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs pcib2: <PCI-PCI bridge> at device 10.0 on pci1 pci2: <PCI bus> on pcib2 fxp0: <Intel 82558 Pro/100 Ethernet> port 0xec00-0xec1f mem 0xdcfff000-0x= dcffffff,0xdff00000-0xdfffffff irq 17 at device 4.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:03:47:3b:b0:9e fxp0: [ITHREAD] fxp1: <Intel 82558 Pro/100 Ethernet> port 0xe880-0xe89f mem 0xdcffe000-0x= dcffefff,0xdfd00000-0xdfdfffff irq 18 at device 5.0 on pci2 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> PHY 1 on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:03:47:3b:b0:9f fxp1: [ITHREAD] pcm0: <NVidia MCP61 High Definition Audio Controller> mem 0xdfaf8000-0xdf= afbfff irq 23 at device 5.0 on pci0 pcm0: [ITHREAD] atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,= 0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xc480-0xc487 mem 0xd= fafd000-0xdfafdfff irq 20 at device 7.0 on pci0 miibus2: <MII bus> on nfe0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000= baseT-FDX, auto nfe0: Ethernet address: 00:13:8f:db:f1:d7 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xe00-0xe07,0xe20-= 0xe23,0xe40-0xe47,0xe60-0xe63,0xb880-0xb88f mem 0xdfafc000-0xdfafcfff irq= 21 at device 8.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce MCP61 SATA300 controller> port 0xe80-0xe87,0xea0-= 0xea3,0xec0-0xec7,0xee0-0xee3,0xb000-0xb00f mem 0xdfaf7000-0xdfaf7fff irq= 22 at device 8.1 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xc0000000-0x= cfffffff,0xdd000000-0xddffffff irq 23 at device 13.0 on pci0 acpi_button0: <Power Button> on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on a= cpi0 sio0: type 16550A sio0: [FILTER] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0= ums0: <vendor 0x1241 product 0x1177, class 0/0, rev 1.10/2.70, addr 2> on= uhub0 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2210200027 Hz quality 800 Timecounters tick every 1.000 msec ad0: 286168MB <SAMSUNG HD300LD WK100-12> at ata0-master UDMA100 acd0: DVDR <TSSTcorpCD/DVDW SH-S182D/SB06> at ata0-slave UDMA33 ad4: 238475MB <WDC WD2500JS-58NCB1 10.02E02> at ata2-master SATA300 ad6: 476940MB <SAMSUNG HD501LJ CR100-12> at ata3-master SATA300 ad8: 476940MB <SAMSUNG HD501LJ CR100-12> at ata4-master SATA300 ad10: 476940MB <SAMSUNG HD501LJ CR100-12> at ata5-master SATA300 Waiting 5 seconds for SCSI devices to settle pcm0: <HDA Codec: Realtek ALC888> pcm0: <HDA Driver Revision: 20071129_0050> sa0 at ahc0 bus 0 target 8 lun 0 sa0: <QUANTUM DLT8000 0256> Removable Sequential Access SCSI-2 device=20 sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device=20 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device=20 da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device=20 da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present ch0 at ahc0 bus 0 target 9 lun 0 ch0: <HP C7145-8000 2060> Removable Changer SCSI-3 device=20 ch0: 3.300MB/s transfers ch0: 9 slots, 1 drive, 1 picker, 0 portals da4 at ahc0 bus 0 target 0 lun 0 da4: <COMPAQ BF03698578 HPB2> Fixed Direct Access SCSI-3 device=20 da4: 40.000MB/s transfers (20.000MHz, offset 7, 16bit) da4: Command Queueing Enabled da4: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C) da3 at umass-sim0 bus 0 target 0 lun 3 da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device=20 da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/da4s1a WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 --------------050301090108010504020305-- --------------enigC49012C91F1ECFA49CBDEAA4 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkhFVmoACgkQyefZDeXnaDF/UACdHUBoHJ1o5CbItnJonq9QJtbm /aEAn3MVn4b93VtUNG6LUXPYZxhvP78W =BcFU -----END PGP SIGNATURE----- --------------enigC49012C91F1ECFA49CBDEAA4--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48455665.9040600>