Date: Mon, 24 Sep 2001 22:02:18 -0700 (PDT) From: Christopher Dempsey <chris@graddiv.ucsb.edu> To: gregor.bittel@gmx.de, freebsd-smp@freebsd.org, FreeBSD Questions Mailing List <freebsd-questions@freebsd.org>, freebsd-current@freebsd.org Subject: Forwarded mail.... Message-ID: <Pine.BSF.4.21.0109242159200.39606-100000@ic.ucsb.edu>
next in thread | raw e-mail | index | archive | help
Gregor,
I can't get the 4.x output, but the 5.0-C output is attached below. I've
cc'd the info to a few other lists in case it helps.
Sorry for the cross-posting...
**********************
Chris Dempsey
---------- Forwarded message ----------
Date: Mon, 24 Sep 2001 21:59:11 -0700 (PDT)
From: Charlie Root <root@terra.luckyirish.net>
To: chris@graddiv.ucsb.edu
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f74d0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x2f
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009f870
signature: 'PCMP'
base table length: 268
version: 1.4
checksum: 0xec
OEM ID: 'TYAN '
Product ID: 'GUINNESS '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 25
local APIC address: 0xfee00000
extended table length: 344
extended table checksum: 23
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
1 0x10 BSP, usable 6 6 1 0x383fbff
0 0x10 AP, usable 6 6 1 0x383fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 3 0 2 0
INT active-hi edge 3 1 2 1
INT active-hi edge 3 0 2 2
INT active-lo level 3 3 2 3
INT active-hi edge 3 4 2 4
INT active-lo level 3 5 2 5
INT active-hi edge 3 6 2 6
INT active-hi edge 3 7 2 7
INT active-hi edge 3 8 2 8
INT active-hi edge 3 9 2 9
INT active-lo level 3 10 2 10
INT active-lo level 3 11 2 11
INT active-hi edge 3 12 2 12
INT active-hi edge 3 13 2 13
INT active-hi edge 3 14 2 14
INT active-hi edge 3 15 2 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 3 0 255 0
NMI active-hi edge 1 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x10000000
address range: 0xdc000000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xec000000
address range: 0x10000000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfc000000
address range: 0x2e00000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfee01000
address range: 0x11ff000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x24000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xc8000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xcc000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd0000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd2000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd4000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd6000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd8000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xe0000
address range: 0x12000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xf4000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xf8000
address range: 0x4000
--
Bus Heirarchy
bus ID: 3 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
-------------------------------------------------------------------------------
dmesg output:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Tue Sep 18 04:56:55 PDT 2001
root@terra.luckyirish.net:/usr/obj/usr/src/sys/TERRA
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1194.68-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x661 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257335296 (251304K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03a2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a20a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03a20f8.
Pentium Pro MTRR support enabled
WARNING: Driver mistake: destroy_dev on 154/0
Using $PIR table, 268435454 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
acpi0: power button is handled as a fixed feature programming model.
acpi0: sleep button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.COM1 - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.COM2 - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.LPT_ - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.PCI0.ISA_.SIO_.FDC0 - AE_AML_INVALID_RESOURCE_TYPE
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff iomem 0xdc000-0xdffff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 766 ATA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdc000-0xdcfff irq 11 at device 7.4 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, bus powered
ukbd0: Microsoft Microsoft Natural Keyboard Pro, rev 1.10/1.14, addr 3, iclass 3/1
kbd0 at ukbd0
uhid0: Microsoft Microsoft Natural Keyboard Pro, rev 1.10/1.14, addr 3, iclass 3/0
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.21, addr 4, iclass 3/1
ums0: 5 buttons and Z dir.
ugen0: UMAX USB SCANNER, rev 1.00/1.00, addr 5
pcib2: <PCI-PCI bridge> at device 8.0 on pci0
pci2: <PCI bus> on pcib2
asr0: <Adaptec Caching SCSI RAID> mem 0xf4000000-0xf5ffffff irq 5 at device 8.1 on pci0
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 320R, 1 channel, 256 CCBs, Protocol I2O
WARNING: Driver mistake: destroy_dev on 154/1
sio0: <3COM PCI FaxModem> port 0x1c38-0x1c3f irq 10 at device 9.0 on pci0
sio0: moving to sio4
sio4: type 16550A
pci0: <multimedia, audio> at device 10.0 (no driver attached)
pci0: <input device> at device 10.1 (no driver attached)
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xec001000-0xec001fff irq 5 at device 13.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1400-0x14ff mem 0xec002000-0xec002fff irq 10 at device 13.1 on pci0
device_probe_and_attach: ahc1 attach returned 12
pci0: <display, VGA> at device 14.0 (no driver attached)
xl0: <3Com 3c980C Fast Etherlink XL> port 0x1800-0x187f mem 0xec003000-0xec00307f irq 3 at device 15.0 on pci0
xl0: Ethernet address: 00:e0:81:03:88:47
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c980C Fast Etherlink XL> port 0x1880-0x18ff mem 0xec003400-0xec00347f irq 11 at device 16.0 on pci0
xl1: Ethernet address: 00:e0:81:03:88:48
miibus1: <MII bus> on xl1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: cannot reserve I/O port range (1 ports)
fdc0: cannot reserve I/O port range (1 ports)
orm0: <Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xd0fff,0xe0000-0xe3fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 5 seconds for SCSI devices to settle
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-0 320R> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 175017MB (358434816 512 byte sectors: 255H 63S/T 22311C)
Mounting root from ufs:/dev/da0s3a
cd1 at ahc0 bus 0 target 2 lun 0
cd1: <PIONEER DVD-ROM DVD-304 1.03> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 16)
cd1: Attempt to query device size failed: NOT READY, Medium not present
Invalid time in real time clock.
Check and reset the date immediately!
SMP: AP CPU #1 Launched!
cd0 at ahc0 bus 0 target 0 lun 0
cd0: <HP CD-Writer+ 9600 1.0a> Removable CD-ROM SCSI-4 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [250404 x 2048 byte records]
===============================================================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0109242159200.39606-100000>