Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 16 Jan 2005 21:15:28 +0200
From:      "Vladimir Chukharev" <chu@h33.erkki.ton.tut.fi>
To:        freebsd-current@freebsd.org
Subject:   Re: do YOU have one of these USB devices?
Message-ID:  <opskpmf2xnsh9hi4@localhost>

next in thread | raw e-mail | index | archive | help
Julian Elischer wrote:
> > If so, let me know if it crashes the system, or works
> > (or just does nothing :-) )
> > Julian
> > (working through the USB PRs)
> of course forgot to include the devices..
>  kensington mouse-in-a-box optical pro,
> as seen in: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/32713
> or
>   "Logitech Wingman Digital 3D"
>   (product 0xc207 vendor 0x046d release 0x0104)
>   as seen in: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/30502

I have an Extreme version of the last. Not sure about the codes though.

When I connect it to my notebook PC, I get these on the console:

Jan 16 20:49:46 chu kernel: uhid0: Logitech Inc. WingMan Extreme Digital 3D, rev 1.00/1.04, addr 3, iclass 3/0
Jan 16 20:50:00 chu /usr/sbin/cron[61768]: (root) CMD (/usr/libexec/atrun)
Jan 16 20:50:19 chu kernel: uhid0: at uhub0 port 1 (addr 3) disconnected
Jan 16 20:50:19 chu kernel: uhid0: detached
Jan 16 20:50:33 chu kernel: uhid0: Logitech Inc. WingMan Extreme Digital 3D, rev 1.00/1.04, addr 3, iclass 3/0


After a reboot with it connected, my dmesg is
chu@chu:~ 20:58:57 $ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #9: Mon Dec 20 20:53:04 EET 2004
     root@chu.h33.erkki.ton.tut.fi:/usr/obj/usr/src/sys/CHU
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1500MHz (1500.06-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
   Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 527695872 (503 MB)
avail memory = 506720256 (483 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xdc00-0xdc07 mem 0xfeb00000-0xfeb7ffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd480-0xd49f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhid0: Logitech Inc. WingMan Extreme Digital 3D, rev 1.00/1.04, addr 2, iclass 3/0
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd800-0xd81f irq 5 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd880-0xd89f irq 4 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 4.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> at device 5.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Ricoh R5C551> mem 0xfe8ff000-0xfe8ff7ff irq 11 at device 5.1 on pci1
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:18:13:e4
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:18:13:e4
fwe0: Ethernet address: 02:e0:18:18:13:e4
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port 0xcc00-0xcc3f mem 0xfe8fe000-0xfe8fefff irq 11 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:a6:8e:a9:ae
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1500058241 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 57231MB <IC25N060ATMR04-0/MOBOAD4A> [116280/16/63] at ata0-master UDMA100
acd0: DVDR <MATSHITADVD-RAM UJ-810/C100> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s2a
pcm0: <Intel ICH4 (82801DB)> port 0xe100-0xe13f,0xe000-0xe0ff at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
iwi0: <Intel(R) PRO/Wireless 2200BG MiniPCI> mem 0xfe8fd000-0xfe8fdfff irq 4 at device 4.0 on pci1
iwi0: Ethernet address: 00:0e:35:1a:84:71
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
chu@chu:~ 21:01:58 $


All action by the joystick result in nothing. Is there any game or other
program which uses the joystick?
What else can I check about it?

Best regards,
-- 
V.Chukharev



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?opskpmf2xnsh9hi4>