From owner-freebsd-ports Sun Jun 1 02:34:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA15665 for ports-outgoing; Sun, 1 Jun 1997 02:34:26 -0700 (PDT) Received: from mexico.brainstorm.eu.org (root@mexico.brainstorm.fr [193.56.58.253]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA15659 for ; Sun, 1 Jun 1997 02:34:21 -0700 (PDT) Received: from brasil.brainstorm.eu.org (brasil.brainstorm.fr [193.56.58.33]) by mexico.brainstorm.eu.org (8.8.4/8.8.4) with ESMTP id LAA03617 for ; Sun, 1 Jun 1997 11:34:13 +0200 Received: (from uucp@localhost) by brasil.brainstorm.eu.org (8.8.4/8.6.12) with UUCP id LAA21865 for ports@FreeBSD.ORG; Sun, 1 Jun 1997 11:33:58 +0200 Received: (from roberto@localhost) by keltia.freenix.fr (8.8.5/keltia-uucp-2.9) id LAA15677; Sun, 1 Jun 1997 11:19:07 +0200 (CEST) Message-ID: <19970601111907.20896@keltia.freenix.fr> Date: Sun, 1 Jun 1997 11:19:07 +0200 From: Ollivier Robert To: ports@FreeBSD.ORG Subject: Re: perl5.004 References: <27627.865137145@orion.webspan.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.67 In-Reply-To: <27627.865137145@orion.webspan.net>; from Gary Palmer on Sat, May 31, 1997 at 11:52:25PM -0400 X-Operating-System: FreeBSD 3.0-CURRENT ctm#3332 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk According to Gary Palmer: > perl: warning: Setting locale failed. > perl: warning: Please check that your locale settings: > LC_ALL = (unset), > LANG = "us" It seems to fails with many locale settings :-( Without a defined LANG it works. After checking, the following work: "da" (and all links to it) "de" " " " " " "en" "en_AU" "en_GB" "en_US" "fr" "fr_BE" "fr_CA" "fr_CH" "fr_FR" "hr_HR.ISO_8859-2" "is" "it" "it_CH" "it_IT" "pt" "ru_RU.*" The following fail: "ASCII" "es" "fi" "ja" "ko_KR.EUC" "lt_LN.*" "nl" "no" "sv" -- Ollivier ROBERT -=- FreeBSD: There are no limits -=- roberto@keltia.freenix.fr FreeBSD keltia.freenix.fr 3.0-CURRENT #10: Fri May 23 22:47:39 CEST 1997 From owner-freebsd-ports Sun Jun 1 03:05:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA16735 for ports-outgoing; Sun, 1 Jun 1997 03:05:26 -0700 (PDT) Received: from dfw-ix10.ix.netcom.com (dfw-ix10.ix.netcom.com [206.214.98.10]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA16730 for ; Sun, 1 Jun 1997 03:05:23 -0700 (PDT) Received: (from smap@localhost) by dfw-ix10.ix.netcom.com (8.8.4/8.8.4) id FAA05168; Sun, 1 Jun 1997 05:04:51 -0500 (CDT) Received: from sjx-ca25-02.ix.netcom.com(204.30.65.194) by dfw-ix10.ix.netcom.com via smap (V1.3) id sma005163; Sun Jun 1 05:04:26 1997 Received: (from asami@localhost) by blimp.mimi.com (8.8.5/8.6.9) id DAA28169; Sun, 1 Jun 1997 03:03:22 -0700 (PDT) Date: Sun, 1 Jun 1997 03:03:22 -0700 (PDT) Message-Id: <199706011003.DAA28169@blimp.mimi.com> To: pgiffuni@fps.biblos.unal.edu.co CC: freebsd-ports@FreeBSD.ORG In-reply-to: <338FCBAF.7860@fps.biblos.unal.edu.co> (pgiffuni@fps.biblos.unal.edu.co) Subject: Re: ports/3701 From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * Oops, I thought that line was modified automatically by cvs (just played * with it ;) ) so it wouldn't care what I did. Do I leave this line out * for new ports? It is modified automatically upon checkout but if you change it, but the change will still go into the repository. It doesn't matter much, but I don't feel "right" changing it needlessly. As for new ports Makefiles, we need something so cvs can substitute. I recommend "$Id$". (And if you are sending an update to an existing port, just leave the Id line alone.) Satoshi From owner-freebsd-ports Sun Jun 1 03:05:50 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA16775 for ports-outgoing; Sun, 1 Jun 1997 03:05:50 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA16755; Sun, 1 Jun 1997 03:05:44 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id DAA02222; Sun, 1 Jun 1997 03:05:15 -0700 (PDT) Date: Sun, 1 Jun 1997 03:05:15 -0700 (PDT) Message-Id: <199706011005.DAA02222@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-bugs@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3736 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: fax2ps generated by port graphics/tiff34 won't work Responsible-Changed-From-To: freebsd-bugs->freebsd-ports Responsible-Changed-By: asami Responsible-Changed-When: Sun Jun 1 03:04:44 PDT 1997 Responsible-Changed-Why: Wrong category, should have been "ports" in the first place. From owner-freebsd-ports Sun Jun 1 08:55:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24987 for ports-outgoing; Sun, 1 Jun 1997 08:55:47 -0700 (PDT) Received: from nagual.pp.ru (ache.relcom.ru [194.58.229.133]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA24982 for ; Sun, 1 Jun 1997 08:55:35 -0700 (PDT) Received: (from ache@localhost) by nagual.pp.ru (8.8.5/8.8.5) id TAA00588; Sun, 1 Jun 1997 19:55:55 +0400 (MSD) Date: Sun, 1 Jun 1997 19:55:52 +0400 (MSD) From: =?KOI8-R?B?4c7E0sXKIP7F0s7P1w==?= To: Ollivier Robert cc: ports@FreeBSD.ORG Subject: Re: perl5.004 In-Reply-To: <19970601111907.20896@keltia.freenix.fr> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 1 Jun 1997, Ollivier Robert wrote: > According to Gary Palmer: > > perl: warning: Setting locale failed. > > perl: warning: Please check that your locale settings: > > LC_ALL = (unset), > > LANG = "us" > > It seems to fails with many locale settings :-( > All names you mention except "hr_HR.ISO_8859-2" "ru_RU.*" "ASCII" "lt_LN.*" (also "ko_KR.EUC" is correct, you need link with -lxpg4) are incorrectly constructed and system setlocale() should fail on them. If perl fallbacks to system setlocale(), it should fail too. If perl not fall back, it is perl bug and must be fixed for FreeBSD case at least. -- Andrey A. Chernov http://www.nagual.pp.ru/~ache/ From owner-freebsd-ports Sun Jun 1 12:23:52 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA01784 for ports-outgoing; Sun, 1 Jun 1997 12:23:52 -0700 (PDT) Received: from mail.webspan.net (root@mail.webspan.net [206.154.70.7]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA01778 for ; Sun, 1 Jun 1997 12:23:48 -0700 (PDT) Received: from orion.webspan.net (orion.webspan.net [206.154.70.5]) by mail.webspan.net (8.8.5/8.8.5) with ESMTP id PAA02111; Sun, 1 Jun 1997 15:23:46 -0400 (EDT) Received: from orion.webspan.net (localhost [127.0.0.1]) by orion.webspan.net (WEBSPN/970116) with ESMTP id PAA17260; Sun, 1 Jun 1997 15:23:46 -0400 (EDT) To: Ollivier Robert cc: ports@FreeBSD.ORG From: "Gary Palmer" Subject: Re: perl5.004 In-reply-to: Your message of "Sun, 01 Jun 1997 11:19:07 +0200." <19970601111907.20896@keltia.freenix.fr> Date: Sun, 01 Jun 1997 15:23:46 -0400 Message-ID: <17258.865193026@orion.webspan.net> Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Ollivier Robert wrote in message ID <19970601111907.20896@keltia.freenix.fr>: > According to Gary Palmer: > > perl: warning: Setting locale failed. > > perl: warning: Please check that your locale settings: > > LC_ALL = (unset), > > LANG = "us" > > It seems to fails with many locale settings :-( I found the problem. Did you install StarOffice? Unsetenv your LD_LIBRARY_PATH (or rather the one it sets up for you) and then perl will work better. (much swearing deleted) Gary -- Gary Palmer FreeBSD Core Team Member FreeBSD: Turning PC's into workstations. See http://www.FreeBSD.ORG/ for info From owner-freebsd-ports Sun Jun 1 15:01:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA07013 for ports-outgoing; Sun, 1 Jun 1997 15:01:30 -0700 (PDT) Received: from mexico.brainstorm.eu.org (root@mexico.brainstorm.fr [193.56.58.253]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA07005 for ; Sun, 1 Jun 1997 15:01:22 -0700 (PDT) Received: from brasil.brainstorm.eu.org (brasil.brainstorm.fr [193.56.58.33]) by mexico.brainstorm.eu.org (8.8.4/8.8.4) with ESMTP id AAA04740 for ; Mon, 2 Jun 1997 00:01:12 +0200 Received: (from uucp@localhost) by brasil.brainstorm.eu.org (8.8.4/8.6.12) with UUCP id AAA28451 for ports@FreeBSD.ORG; Mon, 2 Jun 1997 00:00:41 +0200 Received: (from roberto@localhost) by keltia.freenix.fr (8.8.5/keltia-uucp-2.9) id XAA18556; Sun, 1 Jun 1997 23:41:11 +0200 (CEST) Message-ID: <19970601234111.07732@keltia.freenix.fr> Date: Sun, 1 Jun 1997 23:41:11 +0200 From: Ollivier Robert To: ports@FreeBSD.ORG Subject: Re: perl5.004 References: <19970601111907.20896@keltia.freenix.fr> <17258.865193026@orion.webspan.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.67 In-Reply-To: <17258.865193026@orion.webspan.net>; from Gary Palmer on Sun, Jun 01, 1997 at 03:23:46PM -0400 X-Operating-System: FreeBSD 3.0-CURRENT ctm#3332 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk According to Gary Palmer: > I found the problem. Did you install StarOffice? Unsetenv your > LD_LIBRARY_PATH (or rather the one it sets up for you) and then perl > will work better. Nope, not on this machine. I don't have LD_LIBRARY_PATH set. See Andrey's message for more data. -- Ollivier ROBERT -=- FreeBSD: There are no limits -=- roberto@keltia.freenix.fr FreeBSD keltia.freenix.fr 3.0-CURRENT #10: Fri May 23 22:47:39 CEST 1997 From owner-freebsd-ports Sun Jun 1 23:10:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA29444 for ports-outgoing; Sun, 1 Jun 1997 23:10:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA29438; Sun, 1 Jun 1997 23:10:01 -0700 (PDT) Resent-Date: Sun, 1 Jun 1997 23:10:01 -0700 (PDT) Resent-Message-Id: <199706020610.XAA29438@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, phils@pixelogix.com Received: from casa.plan.pixelogix.com (pixelogix.com [206.129.248.112]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA28990 for ; Sun, 1 Jun 1997 23:01:16 -0700 (PDT) Received: (from phils@localhost) by casa.plan.pixelogix.com (8.8.5/8.8.5) id XAA09361; Sun, 1 Jun 1997 23:00:30 -0700 (PDT) Message-Id: <199706020600.XAA09361@casa.plan.pixelogix.com> Date: Sun, 1 Jun 1997 23:00:30 -0700 (PDT) From: phils@pixelogix.com Reply-To: phils@pixelogix.com To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3754: tcptrace-3.2.5 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3754 >Category: ports >Synopsis: tcptrace long format causes segmentation fault >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jun 1 23:10:00 PDT 1997 >Last-Modified: >Originator: Phil Staub >Organization: Audio Precision, Inc. >Release: FreeBSD 2.2.1-RELEASE i386 >Environment: Local ethernet network consisting of multiple 486/Pentium class machines connected via NE2000 clone ethernet boards. Captured tcpdump file. >Description: When invoked with -l command line switch, tcptrace will segmentation fault in the middle of printing analysis summary. >How-To-Repeat: Using a file written with tcpdump with the -w option, invoke tcptrace with the -l option. Segmentation fault will occur following printing of the SYN/FIN pkts sent line. >Fix: Apply the following patch to the file output.c in the source distribution: *** output.c.orig Sun Jun 1 22:24:28 1997 --- output.c Sun Jun 1 22:21:23 1997 *************** *** 261,270 **** pba->syn_count, pba->fin_count),(int)bufr)); if (pab->f1323_ws || pba->f1323_ws || pab->f1323_ts || pba->f1323_ts) { StatlineI("req 1323 ws/ts","","%s", ! sprintf(bufl,"%c/%c", ! pab->f1323_ws?'Y':'N',pab->f1323_ts?'Y':'N'), ! sprintf(bufl,"%c/%c", ! pba->f1323_ws?'Y':'N',pba->f1323_ts?'Y':'N')); } if (pab->f1323_ws || pba->f1323_ws) { StatlineI("adv wind scale","","%d", --- 261,270 ---- pba->syn_count, pba->fin_count),(int)bufr)); if (pab->f1323_ws || pba->f1323_ws || pab->f1323_ts || pba->f1323_ts) { StatlineI("req 1323 ws/ts","","%s", ! (sprintf(bufl,"%c/%c", ! pab->f1323_ws?'Y':'N',pab->f1323_ts?'Y':'N'),(int)bufl), ! (sprintf(bufr,"%c/%c", ! pba->f1323_ws?'Y':'N',pba->f1323_ts?'Y':'N'),(int)bufr)); } if (pab->f1323_ws || pba->f1323_ws) { StatlineI("adv wind scale","","%d", >Audit-Trail: >Unformatted: From owner-freebsd-ports Sun Jun 1 23:11:12 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA29509 for ports-outgoing; Sun, 1 Jun 1997 23:11:12 -0700 (PDT) Received: from centaur.orion.ab.ca (orion.ab.ca [207.245.27.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA29498 for ; Sun, 1 Jun 1997 23:11:09 -0700 (PDT) Received: from localhost (timp@localhost) by centaur.orion.ab.ca (8.8.5/8.6.12) with SMTP id XAA18836 for ; Sun, 1 Jun 1997 23:16:13 GMT Date: Sun, 1 Jun 1997 23:16:12 +0000 () From: Tim Pushor To: ports@freebsd.org Subject: Trouble with pkg_delete & sym links to dirs Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hello, I have software which I am creating pkg_* compatible packages for and am having a bit of problems with symbolic links to directories during the pkg_delete process. I had a problem with files being symlinked but solved it by making sure the symlink got installed/deinstall before the file it referenced. I tried this with the symlinked dir and it did not help. I still get: Attempting to delete /opt/test/dir2 as a file ... blah ... Does anybody know how to properly do this or a possible workaround? I am using FreeBSD-2.2.2-RELEASE Thanks, Tim --- Tim Pushor Orion Technologies Inc. Technical Director Phone: (403) 284-0042 timp@orion.ab.ca support@orion.ab.ca http://www.orion.ab.ca/~timp http://www.orion.ab.ca "communication leadership through innovation" From owner-freebsd-ports Mon Jun 2 05:20:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16229 for ports-outgoing; Mon, 2 Jun 1997 05:20:05 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16213; Mon, 2 Jun 1997 05:20:03 -0700 (PDT) Resent-Date: Mon, 2 Jun 1997 05:20:03 -0700 (PDT) Resent-Message-Id: <199706021220.FAA16213@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, rssh@satori.ipri.kiev.ua Received: from satori.ipri.kiev.ua ([194.44.146.19]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA15974 for ; Mon, 2 Jun 1997 05:15:03 -0700 (PDT) Received: (from rssh@localhost) by satori.ipri.kiev.ua (8.8.5/8.8.5) id PAA08277; Mon, 2 Jun 1997 15:17:30 +0300 (EET DST) Message-Id: <199706021217.PAA08277@satori.ipri.kiev.ua> Date: Mon, 2 Jun 1997 15:17:30 +0300 (EET DST) From: Ruslan Shevchenko Reply-To: rssh@satori.ipri.kiev.ua To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3756: port of SimPack Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3756 >Category: ports >Synopsis: port of SimPack >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Mon Jun 2 05:20:02 PDT 1997 >Last-Modified: >Originator: Ruslan Shevchenko >Organization: IPRI >Release: FreeBSD 2.2.1-RELEASE i386 >Environment: >Description: Port of SimPack. --- set of libraries and tools for simulation modelling. >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Mon Jun 2 05:30:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16692 for ports-outgoing; Mon, 2 Jun 1997 05:30:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16678; Mon, 2 Jun 1997 05:30:01 -0700 (PDT) Resent-Date: Mon, 2 Jun 1997 05:30:01 -0700 (PDT) Resent-Message-Id: <199706021230.FAA16678@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, rssh@satori.ipri.kiev.ua Received: from satori.ipri.kiev.ua ([194.44.146.19]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA16143 for ; Mon, 2 Jun 1997 05:19:42 -0700 (PDT) Received: (from rssh@localhost) by satori.ipri.kiev.ua (8.8.5/8.8.5) id PAA08407; Mon, 2 Jun 1997 15:22:23 +0300 (EET DST) Message-Id: <199706021222.PAA08407@satori.ipri.kiev.ua> Date: Mon, 2 Jun 1997 15:22:23 +0300 (EET DST) From: Ruslan Shevchenko Reply-To: rssh@satori.ipri.kiev.ua To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3757: port of SimPack Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3757 >Category: ports >Synopsis: port of simpack (I forgott to write the name of file in prev.) >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Mon Jun 2 05:30:00 PDT 1997 >Last-Modified: >Originator: Ruslan Shevchenko >Organization: IPRI >Release: FreeBSD 2.2.1-RELEASE i386 >Environment: >Description: So, port is on ftp://ftp.freebsd.org/pub/FreeBSD/incoming/simpack.tar.gz >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Mon Jun 2 05:30:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16714 for ports-outgoing; Mon, 2 Jun 1997 05:30:08 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA16696; Mon, 2 Jun 1997 05:30:04 -0700 (PDT) Resent-Date: Mon, 2 Jun 1997 05:30:04 -0700 (PDT) Resent-Message-Id: <199706021230.FAA16696@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, rssh@cki.ipri.kiev.ua Received: from satori.ipri.kiev.ua ([194.44.146.19]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA16381 for ; Mon, 2 Jun 1997 05:23:41 -0700 (PDT) Received: (from rssh@localhost) by satori.ipri.kiev.ua (8.8.5/8.8.5) id PAA08524; Mon, 2 Jun 1997 15:26:24 +0300 (EET DST) Message-Id: <199706021226.PAA08524@satori.ipri.kiev.ua> Date: Mon, 2 Jun 1997 15:26:24 +0300 (EET DST) From: Ruslan Shevchenko Reply-To: rssh@cki.ipri.kiev.ua To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3758: port of SR programming language Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3758 >Category: ports >Synopsis: port of SR programming language >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Mon Jun 2 05:30:02 PDT 1997 >Last-Modified: >Originator: Ruslan Shevchenko >Organization: >Release: FreeBSD 2.2.1-RELEASE i386 >Environment: >Description: port archive is on ftp://ftp.freebsd.org/pub/FreeBSD/incoming/sr.tar.gz >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Mon Jun 2 07:30:29 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA21473 for ports-outgoing; Mon, 2 Jun 1997 07:30:29 -0700 (PDT) Received: from fore.com (mailhub.fore.com [192.88.243.4]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA21467; Mon, 2 Jun 1997 07:30:25 -0700 (PDT) Received: from dolphin.fore.com (dolphin-eth.fore.com [192.88.243.27]) by fore.com (8.7.3/8.6.11) with ESMTP id KAA06214; Mon, 2 Jun 1997 10:25:22 -0400 (EDT) Received: from jwb.fore.com (jbeiter-pc.fore.com [169.144.6.16]) by dolphin.fore.com (8.7.5/8.7.3) with ESMTP id KAA27118; Mon, 2 Jun 1997 10:29:52 -0400 (EDT) Received: (from jwb@localhost) by jwb.fore.com (8.8.5/8.8.5) id KAA01533; Mon, 2 Jun 1997 10:23:28 -0400 (EDT) Message-Id: <199706021423.KAA01533@jwb.fore.com> Subject: ppp and static IP To: bugs@freebsd.org Date: Mon, 2 Jun 1997 10:23:27 -0400 (EDT) Cc: hackers@freebsd.org, ports@freebsd.org From: X-Mailer: ELM [version 2.4ME+ PL28 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Freebsd 2.2.1-RELEASE ppp 2.2 patch level 0beta3 and 2.3 patch level 0beta3 My provider upgraded their Bay routers last week and now I can not use ppp on Freebsd with a static IP address. Mickysoft and linux works so I'm hung out to dry. I can use a dynamic IP though. Bay is saying that Freebsd is messed up. Debug doesn't show anything special in the LCP negotiation.. tried turning off and on every switch in the man page for pppd and tried turning off tcp/ip extensions in sysconfig. I tried compiling the new pppd (2.3 which supports dial on demand) but it does the same thing. I did discover that the make process specifically for freebsd does not work and munges the system src tree. Has anyone got a valid port for the new pppd? Please cc me in email since I don't get this list. Any suggestions or help or fixes for my ppp problem are very welcome. I don't want to load linux and really don't want to find another provider just because of this so I get to learn slip this week (yay!). @-=-=-=-=-=-=-=-=-=-=-=-=-=-@ Joe Beiter FORE Systems, Inc. jwb@fore.com Network Integration Services (412)772-6585 From owner-freebsd-ports Mon Jun 2 07:40:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA22036 for ports-outgoing; Mon, 2 Jun 1997 07:40:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA22008; Mon, 2 Jun 1997 07:40:02 -0700 (PDT) Resent-Date: Mon, 2 Jun 1997 07:40:02 -0700 (PDT) Resent-Message-Id: <199706021440.HAA22008@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, dl5bct@inss1.etec.uni-karlsruhe.de Received: from insl1.etec.uni-karlsruhe.de (dl5bct@insl1.etec.uni-karlsruhe.de [129.13.109.178]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA21505 for ; Mon, 2 Jun 1997 07:30:34 -0700 (PDT) Received: (from dl5bct@localhost) by insl1.etec.uni-karlsruhe.de (8.8.5/8.8.2) id QAA08405; Mon, 2 Jun 1997 16:30:31 +0200 (CEST) Message-Id: <199706021430.QAA08405@insl1.etec.uni-karlsruhe.de> Date: Mon, 2 Jun 1997 16:30:31 +0200 (CEST) From: pc@akk.uni-karlsruhe.de Reply-To: dl5bct@inss1.etec.uni-karlsruhe.de To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3759: xtem-5.23 (X11 TEx Menu) port submitted (new and only almost perfect ;-)) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3759 >Category: ports >Synopsis: xtem-5.23 (X11 TEx Menu) port submitted (new and only almost perfect ;-)) >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Mon Jun 2 07:40:01 PDT 1997 >Last-Modified: >Originator: Peter Cornelius >Organization: AKK Uni Karlsruhe >Release: Port: xtem-5.23 / OS: FreeBSD 2.2-STABLE i386 >Environment: >Description: This is what it's all about (pkg/DESCR): The manpage says: "(...) xtem - TeX menu for the X Window System xtem is an X11 program that makes it easy to use TeX (incl. editing, previewing, printer selection, printing, spell checking etc.) with a minimum of unix knowledge and no knowledge of the specific installation. Syntax help to the LaTeX commands (including complete examples) are presented during editing. xtem runs on workstations (and X-terminals) running the X Window System and Tcl/Tk/TclX. The user may easily select and save his preferences (such as editor, previewer etc.). (...)" Buttons, help texts, etc. can be set to the user's pre- ferred language. At the moment the following languages are already available: English and German (Others can be added "easily" by editing the helpfiles accordingly). Peter Cornelius These are the problems that I could not solve (.TODO): Dear FreeBSD portsmaster(s), this is my first port. So I did (and do) have some problems with it. In particular, I don't seem to get into my pocketfull of straw how diff/patch works. It just won't go in. Dunno why. But anyhow, the port seems to work now, so to say be in a state that satisfies me, and I will render it to you. These are the problems that persisted, maybe you can help: *) fix PLIST to remove directories as well. *) include distribution patches. *) check whether there's a more appropiate place to go rather than ${PREFIX}/lib/ (i. e. other than /usr/local/lib) - ask FreeBSD crew. Thanks a lot, and maybe it'll be of use to some of you. Saludos, Peter. Peter Cornelius I hope I got this right now... (sweat...). Cheers, Peter. >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Mon Jun 2 10:07:48 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA29160 for ports-outgoing; Mon, 2 Jun 1997 10:07:48 -0700 (PDT) Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA28581 for freebsd-ports@freebsd.org; Mon, 2 Jun 1997 10:00:39 -0700 (PDT) Date: Mon, 2 Jun 1997 10:00:39 -0700 (PDT) Message-Id: <199706021700.KAA28581@hub.freebsd.org> From: FreeBSD bugmaster To: FreeBSD ports list Subject: Current unassigned ports problem reports Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Current FreeBSD problem reports The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. Bugs can be in one of several states: o - open A problem report has been submitted, no sanity checking performed. a - analyzed The report has been examined by a team member and evaluated. f - feedback The problem has been solved, and the originator has been given a patch or a fix has been committed. The PR remains in this state pending a response from the originator. s - suspended Work on the problem has been postponed. This happens if a timely solution is not possible or is not cost-effective at the present time. The PR continues to exist, though a solution is not being actively sought. If the problem cannot be solved at all, it will be closed, rather than suspended. c - closed A problem report is closed when any changes have been integrated, documented, and tested. Critical problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- f [1997/01/01] ports/2352 ports wu-ftp port does not work with DES crypte o [1997/05/01] ports/3467 ports Update of port xgs o [1997/05/07] ports/3536 ports MakeTexPK calls gftopk with wron argument 3 problems total. Serious problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [1996/10/11] bin/1773 ports A NULL pointer causing segmentation core s [1996/12/22] ports/2268 ports libc from linux emulator does not use /et o [1997/02/13] ports/2731 ports new port: Tcl 8.0A2 o [1997/03/01] ports/2842 ports Expect port upgraded at master site; does o [1997/03/07] ports/2918 ports Unable to pass 8+ command line arguments o [1997/03/11] ports/2956 ports New Port: xgospel-1.10d in ftp.freebsd.or a [1997/03/15] ports/2994 ports xpm port does not build for the first tim o [1997/04/05] ports/3205 ports Mtools-3.0 attempts to flock() a disk par o [1997/04/11] ports/3256 ports ncftp-2.4.2 in packages-2.2 was not linke o [1997/04/24] ports/3377 ports xfishtank port uploaded o [1997/04/25] ports/3390 ports submition of JED port. o [1997/05/04] ports/3500 ports Compile for perl5.003 fails o [1997/05/18] ports/3619 ports new CORBA port omniORB from Olivetti & Or o [1997/05/18] ports/3620 ports new port: OmniBroker o [1997/05/19] ports/3630 ports Updated OmniBroker port o [1997/05/20] ports/3640 ports xlockmore galaxy bombs out o [1997/05/21] ports/3649 ports xlock quits on receipt of signalxx 8 o [1997/05/21] ports/3653 ports ports/net/ucd-snmp does not compile on 2. o [1997/05/21] ports/3654 ports mkdist script is broken. o [1997/05/27] ports/3699 ports listen() backlog in xinetd is too small ( o [1997/05/29] ports/3712 ports xpdf 0.7 ports 21 problems total. Non-critical problems S Submitted Tracker Resp. Description ------------------------------------------------------------------------------- o [1996/04/23] ports/1155 ports systat or top display disagreeing informa o [1996/08/21] ports/1520 ports sudo dosn't recognise certain passwords a a [1996/08/28] ports/1550 ports "make install" needs to know how to updat o [1996/10/31] ports/1939 ports exodus port doesn't build with new g++-2. o [1996/12/03] ports/2145 ports qpopper bulletin support broken o [1996/12/08] ports/2182 ports FreeBSD's and X-32's list of locales do n o [1996/12/21] ports/2264 ports latex* ports need updating o [1997/01/05] ports/2379 ports New URT port o [1997/01/12] ports/2477 ports Tcl 8.0 a1 port submission. o [1997/01/12] ports/2478 ports Tk 8.0a1 port submission. f [1997/01/24] ports/2571 ports Maxima lacks pkg directory o [1997/02/25] ports/2817 ports New port - prodosemu is an Apple2e prodos a [1997/03/02] ports/2849 ports correction to New math/cad port (SCILAB) o [1997/03/03] ports/2869 ports Submiting new port: tac_plus a [1997/03/06] ports/2902 ports Fix xmcd port for PACKAGE_BUILDING o [1997/03/06] ports/2903 ports New port: xdeblock o [1997/03/06] ports/2904 ports New port: wm2 a [1997/03/06] ports/2905 ports Fixed port: xshisen-1.36 o [1997/03/07] ports/2916 ports ports sysutils/top/Makefile MASTER_SITES o [1997/03/08] ports/2920 ports patch for mispositioned xv windows under o [1997/03/08] ports/2922 ports Please commit new port: viz-1.1.1 o [1997/03/09] ports/2926 ports xmgt-2.31 port, now in pub/incoming on ft o [1997/03/10] ports/2936 ports The teTeX port runs strup on /usr/local/b o [1997/03/11] ports/2949 ports bsd.port.mk needs something like FETCH_EN o [1997/03/11] ports/2951 ports xgraph source is not on MASTER_SITE o [1997/03/12] ports/2961 ports New port(jp-vftool-1.2):japanese/virfonts o [1997/03/13] ports/2974 ports updated Makefile and patch-ab of jp-dvi2p o [1997/03/14] ports/2986 ports fvwm95-2.0.43a port don't install/have ma o [1997/03/15] ports/2993 ports qmail-port-take2-proff.tar.gz in incoming o [1997/03/17] ports/3012 ports qmailanalog port in incoming a [1997/03/21] ports/3052 ports /usr/ports/lang/expect does not find tkCo o [1997/03/24] ports/3081 ports sitelispdir is a directory no a path in x o [1997/03/24] ports/3090 ports ircii-2.9-roof does not run. o [1997/04/01] ports/3169 ports nn port broken o [1997/04/03] ports/3189 ports Update plan to version 1.6 o [1997/04/06] ports/3215 ports Update to Gnat port o [1997/04/08] ports/3227 ports new port(xtimer-8087) o [1997/04/10] ports/3248 ports update a port o [1997/04/10] ports/3250 ports New CAD port: xpns o [1997/04/13] ports/3277 ports tcp_wrapper port does not include NIS sup o [1997/04/13] ports/3279 ports new port of KON2 o [1997/04/15] ports/3296 ports New port(jp-GP-2.01jp):japanese/GP. o [1997/04/15] ports/3306 ports new port-package for ifmail o [1997/04/17] ports/3318 ports New port: jigsaw (Java-based HTTP server) o [1997/04/18] ports/3322 ports setlocale problem in lang/perl5 o [1997/04/18] ports/3330 ports hylafax port seems to be broken (partly) o [1997/04/19] ports/3333 ports new port request of korea/fvwm95 o [1997/04/19] ports/3334 ports new port request of korean/han o [1997/04/19] ports/3335 ports new port request of korean/hanemacs o [1997/04/19] ports/3336 ports new port request of korean/hanmutt o [1997/04/19] ports/3338 ports new port request of korean/hfvwm2 o [1997/04/19] ports/3339 ports new port request of korean/hlatexpsfonts o [1997/04/19] ports/3341 ports new port request of korean/hpscat o [1997/04/19] ports/3342 ports new port request of korean/linuxdoc-sgml o [1997/04/19] ports/3343 ports new port request of korean/nh2ps o [1997/04/19] ports/3344 ports new port request of korean/netscape3 o [1997/04/19] ports/3347 ports new port request of net/ztelnet o [1997/04/19] ports/3348 ports new port request of korean/nhppf o [1997/04/19] ports/3352 ports New port: cddbd o [1997/04/20] ports/3357 ports I make "pari-GP" ports o [1997/04/20] ports/3358 ports XFMail-1.1 has been released o [1997/04/20] ports/3362 ports Ports submission: XFrisk 0.99b4 o [1997/04/20] ports/3363 ports port of nana-1.00 for your collection o [1997/04/21] ports/3370 ports tk41 doesn't build if not untarred into / o [1997/04/25] ports/3383 ports kaffe core dumps if LD_LIBRARY_PATH not s o [1997/04/27] ports/3396 ports update of the port of Mesa (now version 2 o [1997/04/28] ports/3407 ports port for ephem-4.28 o [1997/04/28] ports/3411 ports New port - Atari 8 bit computer emulator o [1997/04/28] ports/3412 ports New port - Apple IIGS beta release o [1997/04/28] ports/3413 ports New port: cs-0.3 o [1997/05/01] ports/3440 ports port of webstone submitted o [1997/05/01] ports/3454 ports New port submission: ztrack-1.0 o [1997/05/01] ports/3455 ports mtools-3.6.tgz could have a better mtools o [1997/05/01] ports/3457 ports New ports for cutils 1.3.3 and umatrix o [1997/05/01] ports/3458 ports port of Squeak, version 1.18 o [1997/05/01] ports/3466 ports FreeBSD origional port of auto loan payme o [1997/05/03] ports/3482 ports SlingShot (new) port o [1997/05/03] ports/3484 ports libwww is out of date s [1997/05/04] ports/3498 ports nn-current port is out of date o [1997/05/04] ports/3499 ports exim port out of date o [1997/05/07] ports/3539 ports This is a port of poppassd that should wo o [1997/05/10] ports/3574 ports tkgoodstuff's Dialer script has wrong pat f [1997/05/14] ports/3597 ports jp-groff-0.99 port macro update o [1997/05/16] ports/3607 ports FreeBSD-Logo for Fvwm95 Start-Menu o [1997/05/18] ports/3625 ports New port - connect4 o [1997/05/18] ports/3626 ports New port - Macintosh file utilities o [1997/05/18] ports/3627 ports New port - Atari 2600 VCS emulator o [1997/05/19] ports/3634 ports fvwm95-2.0.43a-i18n-port.tar.gz was put o [1997/05/20] ports/3647 ports new port of nmh-0.14 o [1997/05/21] ports/3656 ports midnight command devel version ports o [1997/05/21] ports/3657 ports Port of NCSA HyperNews submitted as p5-hy o [1997/05/21] ports/3658 ports midnight command devel version ports o [1997/05/21] ports/3659 ports Problem with teTeX install from 2.2.1 CDR o [1997/05/22] ports/3665 ports mtools port install fails o [1997/05/24] ports/3672 ports lsof port fails compilation o [1997/05/25] ports/3686 ports New port: Xbl o [1997/05/25] ports/3687 ports Gnat 3.09 Ada Compiler o [1997/05/26] ports/3692 ports New port of games/bs o [1997/05/28] ports/3702 ports Port of FXHTML for FreeBSD o [1997/05/29] ports/3708 ports Fixed port: mlvwm (x11) o [1997/05/29] ports/3715 ports New port: imlib (graphics) o [1997/05/29] ports/3716 ports New port: enlightenment (x11) o [1997/05/31] ports/3732 ports submission of new port - most-4.7 o [1997/05/31] ports/3734 ports New port: xtoolwait-1.1 o [1997/05/31] ports/3736 ports fax2ps generated by port graphics/tiff34 o [1997/05/31] ports/3737 ports The DHCPD no longer works under FreeBSD 2 o [1997/06/01] ports/3754 ports tcptrace long format causes segmentation o [1997/06/02] ports/3756 ports port of SimPack o [1997/06/02] ports/3757 ports port of simpack (I forgott to write the n o [1997/06/02] ports/3758 ports port of SR programming language o [1997/06/02] ports/3759 ports xtem-5.23 (X11 TEx Menu) port submitted ( 111 problems total. From owner-freebsd-ports Mon Jun 2 17:33:55 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA22741 for ports-outgoing; Mon, 2 Jun 1997 17:33:55 -0700 (PDT) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA22735; Mon, 2 Jun 1997 17:33:52 -0700 (PDT) Received: (from asami@localhost) by vader.cs.berkeley.edu (8.8.5/8.7.3) id RAA02193; Mon, 2 Jun 1997 17:33:48 -0700 (PDT) Date: Mon, 2 Jun 1997 17:33:48 -0700 (PDT) Message-Id: <199706030033.RAA02193@vader.cs.berkeley.edu> To: timp@orion.ab.ca CC: ports@FreeBSD.ORG In-reply-to: (message from Tim Pushor on Sun, 1 Jun 1997 23:16:12 +0000 ()) Subject: Re: Trouble with pkg_delete & sym links to dirs From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * Does anybody know how to properly do this or a possible workaround? I am * using FreeBSD-2.2.2-RELEASE A workaround would be to not list the link and use "@exec ln -sf" and "@unexec rm -f" to add/remove links. Satoshi From owner-freebsd-ports Mon Jun 2 17:34:20 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA22804 for ports-outgoing; Mon, 2 Jun 1997 17:34:20 -0700 (PDT) Received: from awfulhak.demon.co.uk (awfulhak.demon.co.uk [158.152.17.1]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA22793; Mon, 2 Jun 1997 17:34:08 -0700 (PDT) Received: from awfulhak.demon.co.uk (localhost [127.0.0.1]) by awfulhak.demon.co.uk (8.8.5/8.8.5) with ESMTP id BAA18873; Tue, 3 Jun 1997 01:33:55 +0100 (BST) Message-Id: <199706030033.BAA18873@awfulhak.demon.co.uk> X-Mailer: exmh version 1.6.9 8/22/96 To: jwb@fore.com cc: bugs@FreeBSD.ORG, hackers@FreeBSD.ORG, ports@FreeBSD.ORG Subject: Re: ppp and static IP In-reply-to: Your message of "Mon, 02 Jun 1997 10:23:27 EDT." <199706021423.KAA01533@jwb.fore.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 03 Jun 1997 01:33:55 +0100 From: Brian Somers Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > Freebsd 2.2.1-RELEASE > ppp 2.2 patch level 0beta3 and 2.3 patch level 0beta3 > > My provider upgraded their Bay routers last week and now I can not use > ppp on Freebsd with a static IP address. Mickysoft and linux works so I'm > hung out to dry. I can use a dynamic IP though. Bay is saying that Freebsd > is messed up. Debug doesn't show anything special in the LCP negotiation.. > tried turning off and on every switch in the man page for pppd and tried > turning off tcp/ip extensions in sysconfig. > > I tried compiling the new pppd (2.3 which supports dial on demand) but it > does the same thing. I did discover that the make process specifically for > freebsd does not work and munges the system src tree. Has anyone got a valid > port for the new pppd? > > Please cc me in email since I don't get this list. Any suggestions or help > or fixes for my ppp problem are very welcome. I don't want to load linux and > really don't want to find another provider just because of this so I get > to learn slip this week (yay!). You could try user-level ppp. There's a pretty recent copy at http://www.freebsd.org/~brian. > @-=-=-=-=-=-=-=-=-=-=-=-=-=-@ > Joe Beiter FORE Systems, Inc. > jwb@fore.com Network Integration Services > (412)772-6585 -- Brian , Don't _EVER_ lose your sense of humour.... From owner-freebsd-ports Mon Jun 2 18:07:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA24934 for ports-outgoing; Mon, 2 Jun 1997 18:07:47 -0700 (PDT) Received: from centaur.orion.ab.ca (orion.ab.ca [207.245.27.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA24929 for ; Mon, 2 Jun 1997 18:07:43 -0700 (PDT) Received: from localhost (timp@localhost) by centaur.orion.ab.ca (8.8.5/8.6.12) with SMTP id SAA20562; Mon, 2 Jun 1997 18:13:41 GMT Date: Mon, 2 Jun 1997 18:13:38 +0000 () From: Tim Pushor To: Satoshi Asami cc: ports@FreeBSD.ORG Subject: Re: Trouble with pkg_delete & sym links to dirs In-Reply-To: <199706030033.RAA02193@vader.cs.berkeley.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Mon, 2 Jun 1997, Satoshi Asami wrote: > * Does anybody know how to properly do this or a possible workaround? I am > * using FreeBSD-2.2.2-RELEASE > > A workaround would be to not list the link and use "@exec ln -sf" and > "@unexec rm -f" to add/remove links. You know.. I tried two things: 1) creating the symlink with @exec using full directory spec. i.e. @exec /bin/ln -s /opt/realfile /opt/symlink and @cwd /opt @exec /bin/ln -s realfile symlink and it doesn't get done :-(. I can't figure out why. When it first did not work I added the /bin/ in case there was no environment set upon extraction, but did not help. The funny thing is that my package requires a program to run to initialize itself, and it works fine with an @exec. Thanks for your help, Tim --- Tim Pushor Orion Technologies Inc. Technical Director Phone: (403) 284-0042 timp@orion.ab.ca support@orion.ab.ca http://www.orion.ab.ca/~timp http://www.orion.ab.ca "communication leadership through innovation" From owner-freebsd-ports Mon Jun 2 19:30:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA28351 for ports-outgoing; Mon, 2 Jun 1997 19:30:06 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA28339; Mon, 2 Jun 1997 19:30:03 -0700 (PDT) Resent-Date: Mon, 2 Jun 1997 19:30:03 -0700 (PDT) Resent-Message-Id: <199706030230.TAA28339@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, andy@icc.surw.chel.su Received: from rich.chel.su (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA27865 for ; Mon, 2 Jun 1997 19:19:15 -0700 (PDT) Received: from icc.surw.chel.su (surw.chel.su [195.54.2.162]) by rich.chel.su (8.7.2/Murphy) with ESMTP id IAA22016 for ; Tue, 3 Jun 1997 08:23:08 +0600 (UDT) Received: (from andy@localhost) by icc.surw.chel.su (8.8.4/8.8.4) id FAA13657; Tue, 3 Jun 1997 05:56:32 GMT Message-Id: <199706030556.FAA13657@icc.surw.chel.su> Date: Tue, 3 Jun 1997 05:56:32 GMT From: Andrey Zakhvatov Reply-To: andy@icc.surw.chel.su To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3765: New port: mpd-1.0b3 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3765 >Category: ports >Synopsis: New port: mpd-1.0b3 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Mon Jun 2 19:30:01 PDT 1997 >Last-Modified: >Originator: Andrey Zakhvatov >Organization: >Release: FreeBSD 2.1-STABLE i386 >Environment: >Description: This is a port of Multilink PPP daemon for FreeBSD. Look at ftp://ftp.freebsd.org/pub/FreeBSD/incoming/mpd-1.0b3.tar.gz >How-To-Repeat: >Fix: Please, check and commit it. >Audit-Trail: >Unformatted: From owner-freebsd-ports Mon Jun 2 21:26:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA02573 for ports-outgoing; Mon, 2 Jun 1997 21:26:26 -0700 (PDT) Received: from time.cdrom.com (root@time.cdrom.com [204.216.27.226]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA02565 for ; Mon, 2 Jun 1997 21:26:23 -0700 (PDT) Received: from time.cdrom.com (jkh@localhost [127.0.0.1]) by time.cdrom.com (8.8.5/8.6.9) with ESMTP id VAA09380; Mon, 2 Jun 1997 21:26:00 -0700 (PDT) To: Tim Pushor cc: Satoshi Asami , ports@FreeBSD.ORG Subject: Re: Trouble with pkg_delete & sym links to dirs In-reply-to: Your message of "Mon, 02 Jun 1997 18:13:38 -0000." Date: Mon, 02 Jun 1997 21:26:00 -0700 Message-ID: <9377.865311960@time.cdrom.com> From: "Jordan K. Hubbard" Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > 1) creating the symlink with @exec using full directory spec. i.e. See the man page for pkg_create - there are special sequences like %D and %F which can expand here to DTRT for you. Jordan From owner-freebsd-ports Mon Jun 2 23:12:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA08345 for ports-outgoing; Mon, 2 Jun 1997 23:12:04 -0700 (PDT) Received: from crh.cl.msu.edu (crh.cl.msu.edu [35.8.1.24]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA08339 for ; Mon, 2 Jun 1997 23:12:02 -0700 (PDT) Received: (from henrich@localhost) by crh.cl.msu.edu (8.8.5/8.8.5) id CAA17983; Tue, 3 Jun 1997 02:12:01 -0400 (EDT) Message-ID: <19970603021201.57042@crh.cl.msu.edu> Date: Tue, 3 Jun 1997 02:12:01 -0400 From: Charles Henrich To: freebsd-ports@freebsd.org Subject: ispell port requires EMACS?! Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.75 X-Operating-System: FreeBSD 2.2.2-RELEASE Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I just tried to install the ispell port and the first thing it rudely tried to do is go get that behemoth Emacs and install it on my system. I commented out that dependency and everything worked just peachy keen, so might I ask why it is there? -Crh Charles Henrich Michigan State University henrich@msu.edu http://pilot.msu.edu/~henrich From owner-freebsd-ports Mon Jun 2 23:54:29 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA11192 for ports-outgoing; Mon, 2 Jun 1997 23:54:29 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca33-25.ix.netcom.com [199.35.209.121]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA11187 for ; Mon, 2 Jun 1997 23:54:26 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id XAA17932; Mon, 2 Jun 1997 23:54:20 -0700 (PDT) Date: Mon, 2 Jun 1997 23:54:20 -0700 (PDT) Message-Id: <199706030654.XAA17932@silvia.HIP.Berkeley.EDU> To: henrich@crh.cl.msu.edu CC: freebsd-ports@FreeBSD.ORG In-reply-to: <19970603021201.57042@crh.cl.msu.edu> (message from Charles Henrich on Tue, 3 Jun 1997 02:12:01 -0400) Subject: Re: ispell port requires EMACS?! From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * I just tried to install the ispell port and the first thing it rudely tried to * do is go get that behemoth Emacs and install it on my system. I commented out * that dependency and everything worked just peachy keen, so might I ask why it * is there? I believe it needs it to byte-compile an .elc file. Try "make package" and see if everything really worked ok. Satoshi From owner-freebsd-ports Tue Jun 3 00:05:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA11659 for ports-outgoing; Tue, 3 Jun 1997 00:05:58 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA11653; Tue, 3 Jun 1997 00:05:51 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA17233; Tue, 3 Jun 1997 00:05:07 -0700 (PDT) Date: Tue, 3 Jun 1997 00:05:07 -0700 (PDT) Message-Id: <199706030705.AAA17233@freefall.freebsd.org> To: itojun@itojun.org, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3736 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: fax2ps generated by port graphics/tiff34 won't work State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 00:04:53 PDT 1997 State-Changed-Why: Committed, thanks! From owner-freebsd-ports Tue Jun 3 00:18:54 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA12396 for ports-outgoing; Tue, 3 Jun 1997 00:18:54 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA12384; Tue, 3 Jun 1997 00:18:42 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA17543; Tue, 3 Jun 1997 00:17:58 -0700 (PDT) Date: Tue, 3 Jun 1997 00:17:58 -0700 (PDT) Message-Id: <199706030717.AAA17543@freefall.freebsd.org> To: vanilla@Minje.Com.TW, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3712 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: xpdf 0.7 ports State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 00:15:55 PDT 1997 State-Changed-Why: Committed, thanks! By the way, I removed patch-aa altogether, the change from ${PREFIX} to ${X11BASE} is meaningless since they are the same if USE_X11 is defined. Also, I changed "PREFIX=" to "PREFIX?=" in Makefile.config, it is passed in from the environment during a regular build so "?=" would suffice (for people who are debugging the port and types "make" inside the work directory, for instance). From owner-freebsd-ports Tue Jun 3 00:30:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA13133 for ports-outgoing; Tue, 3 Jun 1997 00:30:41 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA13114; Tue, 3 Jun 1997 00:30:36 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA17629; Tue, 3 Jun 1997 00:29:52 -0700 (PDT) Date: Tue, 3 Jun 1997 00:29:52 -0700 (PDT) Message-Id: <199706030729.AAA17629@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, asami@FreeBSD.ORG Subject: Re: ports/3687 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Gnat 3.09 Ada Compiler Responsible-Changed-From-To: freebsd-ports->asami Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 00:29:38 PDT 1997 Responsible-Changed-Why: I'm working on it with the author. From owner-freebsd-ports Tue Jun 3 00:32:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA13341 for ports-outgoing; Tue, 3 Jun 1997 00:32:39 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA13331; Tue, 3 Jun 1997 00:32:33 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA17714; Tue, 3 Jun 1997 00:31:49 -0700 (PDT) Date: Tue, 3 Jun 1997 00:31:49 -0700 (PDT) Message-Id: <199706030731.AAA17714@freefall.freebsd.org> To: colinj@unm.edu, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3659 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Problem with teTeX install from 2.2.1 CDROM State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 00:30:13 PDT 1997 State-Changed-Why: Thanks for the report, but now that 2.2.2 is out, we really can't do anything about the 2.2.1 CDROM. The problem is fixed there, so please either get a new package, or please fix the problem by hand with "ln -sf virtex tex" "ln -sf virtex latex". From owner-freebsd-ports Tue Jun 3 00:33:50 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA13404 for ports-outgoing; Tue, 3 Jun 1997 00:33:50 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA13387; Tue, 3 Jun 1997 00:33:41 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA17792; Tue, 3 Jun 1997 00:32:57 -0700 (PDT) Date: Tue, 3 Jun 1997 00:32:57 -0700 (PDT) Message-Id: <199706030732.AAA17792@freefall.freebsd.org> To: paulz@trantor.stuyts.nl, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3672 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: lsof port fails compilation State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 00:32:23 PDT 1997 State-Changed-Why: The latest port (version 4.09) compiles with -current. From owner-freebsd-ports Tue Jun 3 01:10:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA15034 for ports-outgoing; Tue, 3 Jun 1997 01:10:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA15026; Tue, 3 Jun 1997 01:10:02 -0700 (PDT) Resent-Date: Tue, 3 Jun 1997 01:10:02 -0700 (PDT) Resent-Message-Id: <199706030810.BAA15026@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, vanilla@MinJe.com.TW Received: from MinJe.com.TW (vanilla@ns.MinJe.com.TW [210.66.86.1]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA14983 for ; Tue, 3 Jun 1997 01:09:20 -0700 (PDT) Received: (from vanilla@localhost) by MinJe.com.TW (8.8.5/Vanilla) id QAA01473; Tue, 3 Jun 1997 16:06:48 +0800 (CST) Message-Id: <199706030806.QAA01473@MinJe.com.TW> Date: Tue, 3 Jun 1997 16:06:48 +0800 (CST) From: vanilla@MinJe.com.TW Reply-To: vanilla@MinJe.com.TW To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3767: vtcl updated to 1.10 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3767 >Category: ports >Synopsis: Vtcl updated to 1.10 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue Jun 3 01:10:01 PDT 1997 >Last-Modified: >Originator: Vanill I. Shu >Organization: Cray running FreeBSD >Release: FreeBSD 3.0-CURRENT i386 >Environment: >Description: Vtcl update to 1.10 >How-To-Repeat: >Fix: diff -bcrNp vtcl.orig/Makefile vtcl/Makefile *** vtcl.orig/Makefile Sun Jun 1 05:20:35 1997 --- vtcl/Makefile Tue Jun 3 15:51:26 1997 *************** *** 6,13 **** # $id$ # ! DISTNAME= vt-1.09 ! PKGNAME= vtcl-1.09 CATEGORIES= devel x11 tk42 MASTER_SITES= http://www.neuron.com/stewart/vtcl/dload/ \ ftp://ftp.neuron.com/pub/ --- 6,13 ---- # $id$ # ! DISTNAME= vt-1.10 ! PKGNAME= vtcl-1.10 CATEGORIES= devel x11 tk42 MASTER_SITES= http://www.neuron.com/stewart/vtcl/dload/ \ ftp://ftp.neuron.com/pub/ *************** do-build: *** 21,38 **** do-install: @ ${MKDIR} ${PREFIX}/lib/vtcl/images @ ${MKDIR} ${PREFIX}/lib/vtcl/lib ! @ ${MKDIR} ${PREFIX}/share/vtcl/images @ ${INSTALL_SCRIPT} ${WRKSRC}/vtcl ${PREFIX}/bin .for data in ANNOUNCE CHANGES LICENSE README TODO vt.tcl @ ${INSTALL_DATA} ${WRKSRC}/${data} ${PREFIX}/lib/vtcl .endfor ! .for image in anchor.gif anchor_c.ppm anchor_e.ppm anchor_n.ppm anchor_ne.ppm anchor_nw.ppm anchor_s.ppm anchor_se.ppm anchor_sw.ppm anchor_w.ppm bg.gif border.gif curse.xbm down.xbm ellipses.gif fg.gif fontbase.gif fontsize.gif fontstyle.gif icon_button.gif icon_canvas.gif icon_checkbutton.gif icon_entry.gif icon_frame.gif icon_label.gif icon_listbox.gif icon_menu.gif icon_menubutton.gif icon_message.gif icon_radiobutton.gif icon_scale_h.gif icon_scale_v.gif icon_scrollbar_h.gif icon_scrollbar_v.gif icon_text.gif icon_tixComboBox.gif icon_tixLabelFrame.gif icon_tixNoteBook.gif icon_toplevel.gif justify.gif mgr_grid.gif mgr_pack.gif mgr_place.gif mini-vtcl.xpm ofg.gif rel_groove.gif rel_raised.gif rel_ridge.gif rel_sunken.gif relief.gif title.gif @ ${INSTALL_DATA} ${WRKSRC}/images/${image} ${PREFIX}/lib/vtcl/images .endfor ! .for lib in about.tcl attrbar.tcl attredit.tcl balloon.tcl bind.tcl color.tcl command.tcl compound.tcl compounds.tcl console.tcl do.tcl dragsize.tcl dump.tcl edit.tcl file.tcl filedlg.tcl globals.tcl handle.tcl help.tcl input.tcl lib_core.tcl lib_tix.tcl mgrs.tcl misc.tcl name.tcl prefs.tcl proc.tcl remove.sh replace.sh status.tcl tabpanel.tcl tclet.tcl tmp.tmp toolbar.tcl tops.tcl tree.tcl var.tcl vtclib.tcl widget.tcl @ ${INSTALL_DATA} ${WRKSRC}/lib/${lib} ${PREFIX}/lib/vtcl/lib .endfor --- 21,39 ---- do-install: @ ${MKDIR} ${PREFIX}/lib/vtcl/images @ ${MKDIR} ${PREFIX}/lib/vtcl/lib ! @ ${MKDIR} ${PREFIX}/share/doc/vtcl @ ${INSTALL_SCRIPT} ${WRKSRC}/vtcl ${PREFIX}/bin + @ ${INSTALL_DATA} ${WRKSRC}/doc/tutorial.txt ${PREFIX}/share/doc/vtcl .for data in ANNOUNCE CHANGES LICENSE README TODO vt.tcl @ ${INSTALL_DATA} ${WRKSRC}/${data} ${PREFIX}/lib/vtcl .endfor ! .for image in anchor.gif anchor_c.ppm anchor_e.ppm anchor_n.ppm anchor_ne.ppm anchor_nw.ppm anchor_s.ppm anchor_se.ppm anchor_sw.ppm anchor_w.ppm bg.gif border.gif curse.xbm down.xbm ellipses.gif fg.gif fontbase.gif fontsize.gif fontstyle.gif icon_button.gif icon_canvas.gif icon_checkbutton.gif icon_entry.gif icon_frame.gif icon_label.gif icon_listbox.gif icon_menu.gif icon_menubutton.gif icon_message.gif icon_radiobutton.gif icon_scale_h.gif icon_scale_v.gif icon_scrollbar_h.gif icon_scrollbar_v.gif icon_text.gif icon_tixComboBox.gif icon_tixFileEntry.gif icon_tixLabelEntry.gif icon_tixLabelFrame.gif icon_tixMeter.gif icon_tixNoteBook.gif icon_tixOptionMenu.gif icon_tixPanedWindow.gif icon_tixScrolledHList.gif icon_tixScrolledListBox.gif icon_tixSelect.gif icon_tixTree.gif icon_tix_unknown.gif icon_toplevel.gif justify.gif mgr_grid.gif mgr_pack.gif mgr_place.gif mini-vtcl.xpm ofg.gif rel_groove.gif rel_raised.gif rel_ridge.gif rel_sunken.gif relief.gif title.gif unknown.gif @ ${INSTALL_DATA} ${WRKSRC}/images/${image} ${PREFIX}/lib/vtcl/images .endfor ! .for lib in about.tcl attrbar.tcl balloon.tcl bind.tcl color.tcl command.tcl compound.tcl compounds.tcl console.tcl do.tcl dragsize.tcl dump.tcl edit.tcl file.tcl globals.tcl handle.tcl help.tcl input.tcl lib_core.tcl lib_tix.tcl misc.tcl name.tcl prefs.tcl proc.tcl propmgr.tcl remove.sh replace.sh tabpanel.tcl tclet.tcl toolbar.tcl tops.tcl tree.tcl var.tcl vtclib.tcl widget.tcl @ ${INSTALL_DATA} ${WRKSRC}/lib/${lib} ${PREFIX}/lib/vtcl/lib .endfor diff -bcrNp vtcl.orig/files/md5 vtcl/files/md5 *** vtcl.orig/files/md5 Sun Jun 1 05:20:35 1997 --- vtcl/files/md5 Tue Jun 3 15:27:14 1997 *************** *** 1 **** ! MD5 (vt-1.09.tar.gz) = dc154f7f2a5317474dcf68a19e8569c3 --- 1 ---- ! MD5 (vt-1.10.tar.gz) = 361287fdfa098f41811c146216c78f1d diff -bcrNp vtcl.orig/patches/patch-aa vtcl/patches/patch-aa *** vtcl.orig/patches/patch-aa Sun Jun 1 05:20:35 1997 --- vtcl/patches/patch-aa Tue Jun 3 15:29:16 1997 *************** *** 1,13 **** ! *** vt.tcl.orig Thu May 29 23:18:11 1997 ! --- vt.tcl Thu May 29 23:18:30 1997 *************** *** 1,4 **** ! #!/usr/bin/wish -f ############################################################################## - # --- 1,4 ---- ! #!/usr/local/bin/wish4.2 -f ############################################################################## - # --- 1,13 ---- ! *** vt.tcl.orig Tue Jun 3 15:28:43 1997 ! --- vt.tcl Tue Jun 3 15:28:58 1997 *************** *** 1,4 **** ! #!/usr/bin/wish -f + # $Id: vt.tcl,v 1.16 1997/06/01 16:28:27 stewart Exp $ ############################################################################## --- 1,4 ---- ! #!/usr/local/bin/wish4.2 -f + # $Id: vt.tcl,v 1.16 1997/06/01 16:28:27 stewart Exp $ ############################################################################## diff -bcrNp vtcl.orig/pkg/PLIST vtcl/pkg/PLIST *** vtcl.orig/pkg/PLIST Sun Jun 1 05:20:35 1997 --- vtcl/pkg/PLIST Tue Jun 3 15:50:18 1997 *************** lib/vtcl/images/icon_scrollbar_h.gif *** 41,48 **** --- 41,58 ---- lib/vtcl/images/icon_scrollbar_v.gif lib/vtcl/images/icon_text.gif lib/vtcl/images/icon_tixComboBox.gif + lib/vtcl/images/icon_tixFileEntry.gif + lib/vtcl/images/icon_tixLabelEntry.gif lib/vtcl/images/icon_tixLabelFrame.gif + lib/vtcl/images/icon_tixMeter.gif lib/vtcl/images/icon_tixNoteBook.gif + lib/vtcl/images/icon_tixOptionMenu.gif + lib/vtcl/images/icon_tixPanedWindow.gif + lib/vtcl/images/icon_tixScrolledHList.gif + lib/vtcl/images/icon_tixScrolledListBox.gif + lib/vtcl/images/icon_tixSelect.gif + lib/vtcl/images/icon_tixTree.gif + lib/vtcl/images/icon_tix_unknown.gif lib/vtcl/images/icon_toplevel.gif lib/vtcl/images/justify.gif lib/vtcl/images/mgr_grid.gif *************** lib/vtcl/images/rel_ridge.gif *** 56,64 **** lib/vtcl/images/rel_sunken.gif lib/vtcl/images/relief.gif lib/vtcl/images/title.gif lib/vtcl/lib/about.tcl lib/vtcl/lib/attrbar.tcl - lib/vtcl/lib/attredit.tcl lib/vtcl/lib/balloon.tcl lib/vtcl/lib/bind.tcl lib/vtcl/lib/color.tcl --- 66,74 ---- lib/vtcl/images/rel_sunken.gif lib/vtcl/images/relief.gif lib/vtcl/images/title.gif + lib/vtcl/images/unknown.gif lib/vtcl/lib/about.tcl lib/vtcl/lib/attrbar.tcl lib/vtcl/lib/balloon.tcl lib/vtcl/lib/bind.tcl lib/vtcl/lib/color.tcl *************** lib/vtcl/lib/dragsize.tcl *** 71,97 **** lib/vtcl/lib/dump.tcl lib/vtcl/lib/edit.tcl lib/vtcl/lib/file.tcl - lib/vtcl/lib/filedlg.tcl lib/vtcl/lib/globals.tcl lib/vtcl/lib/handle.tcl lib/vtcl/lib/help.tcl lib/vtcl/lib/input.tcl lib/vtcl/lib/lib_core.tcl lib/vtcl/lib/lib_tix.tcl - lib/vtcl/lib/mgrs.tcl lib/vtcl/lib/misc.tcl lib/vtcl/lib/name.tcl lib/vtcl/lib/prefs.tcl lib/vtcl/lib/proc.tcl lib/vtcl/lib/remove.sh lib/vtcl/lib/replace.sh - lib/vtcl/lib/status.tcl lib/vtcl/lib/tabpanel.tcl lib/vtcl/lib/tclet.tcl - lib/vtcl/lib/tmp.tmp lib/vtcl/lib/toolbar.tcl lib/vtcl/lib/tops.tcl lib/vtcl/lib/tree.tcl lib/vtcl/lib/var.tcl lib/vtcl/lib/vtclib.tcl lib/vtcl/lib/widget.tcl --- 81,107 ---- lib/vtcl/lib/dump.tcl lib/vtcl/lib/edit.tcl lib/vtcl/lib/file.tcl lib/vtcl/lib/globals.tcl lib/vtcl/lib/handle.tcl lib/vtcl/lib/help.tcl lib/vtcl/lib/input.tcl lib/vtcl/lib/lib_core.tcl lib/vtcl/lib/lib_tix.tcl lib/vtcl/lib/misc.tcl lib/vtcl/lib/name.tcl lib/vtcl/lib/prefs.tcl lib/vtcl/lib/proc.tcl + lib/vtcl/lib/propmgr.tcl lib/vtcl/lib/remove.sh lib/vtcl/lib/replace.sh lib/vtcl/lib/tabpanel.tcl lib/vtcl/lib/tclet.tcl lib/vtcl/lib/toolbar.tcl lib/vtcl/lib/tops.tcl lib/vtcl/lib/tree.tcl lib/vtcl/lib/var.tcl lib/vtcl/lib/vtclib.tcl lib/vtcl/lib/widget.tcl + share/doc/vtcl/tutorial.txt + @unexec /bin/rm -rf %D/lib/vtcl + @unexec /bin/rm -rf %D/share/doc/vtcl >Audit-Trail: >Unformatted: From owner-freebsd-ports Tue Jun 3 01:12:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA15184 for ports-outgoing; Tue, 3 Jun 1997 01:12:44 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA15166; Tue, 3 Jun 1997 01:12:28 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA18485; Tue, 3 Jun 1997 01:11:43 -0700 (PDT) Date: Tue, 3 Jun 1997 01:11:43 -0700 (PDT) Message-Id: <199706030811.BAA18485@freefall.freebsd.org> To: Nakai@Mlab.t.u-tokyo.ac.jp, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3708 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Fixed port: mlvwm (x11) State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 01:09:47 PDT 1997 State-Changed-Why: Thanks, committed. A couple of comments: (1) I removed DIST_SUBDIR, granted "mini-icons.tar.gz" doesn't sound very mlvwm-specific but I don't think that will warrant yet another subdirectory under distfiles/. (2) Please don't touch the $Id$ line for updated ports. From owner-freebsd-ports Tue Jun 3 02:05:57 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA17439 for ports-outgoing; Tue, 3 Jun 1997 02:05:57 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA17433; Tue, 3 Jun 1997 02:05:52 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA19283; Tue, 3 Jun 1997 02:05:07 -0700 (PDT) Date: Tue, 3 Jun 1997 02:05:07 -0700 (PDT) Message-Id: <199706030905.CAA19283@freefall.freebsd.org> To: joes@spiritone.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3500 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Compile for perl5.003 fails State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 02:04:29 PDT 1997 State-Changed-Why: The port has been updated to 5.004. Please try it and re-submit a PR if the problem still persists. From owner-freebsd-ports Tue Jun 3 02:19:19 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA18015 for ports-outgoing; Tue, 3 Jun 1997 02:19:19 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA18003; Tue, 3 Jun 1997 02:19:00 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA19606; Tue, 3 Jun 1997 02:18:15 -0700 (PDT) Date: Tue, 3 Jun 1997 02:18:15 -0700 (PDT) Message-Id: <199706030918.CAA19606@freefall.freebsd.org> To: eserte@cs.tu-berlin.de, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3407 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: port for ephem-4.28 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 02:15:52 PDT 1997 State-Changed-Why: Thanks, imported. FYI, here are my changes: === diff -ru ephem/Makefile ephem.new/Makefile --- ephem/Makefile Fri Apr 25 04:00:45 1997 +++ ephem.new/Makefile Tue Jun 3 02:09:13 1997 @@ -1,6 +1,6 @@ # New ports collection makefile for: ephem -# Version required: ? -# Date created: 3 April 1996 +# Version required: 4.28 +# Date created: 3 April 1997 # Whom: eserte # # $Id: $ @@ -8,8 +8,8 @@ DISTNAME= ephem_4.28_unix PKGNAME= ephem-4.28 -CATEGORIES+= astro -MASTER_SITES= ftp://freefall.FreeBSD.ORG/pub/FreeBSD/LOCAL_PORTS/ +CATEGORIES= astro +MASTER_SITES= ${MASTER_SITE_LOCAL} MAINTAINER= eserte@cs.tu-berlin.de === I thought the "version" was obvious. I took the liberty to guess that you didn't hold the port for more than a year. :) The "+"= in CATEGORIES is unnecessary because there is only one such line. Also, the LOCAL_PORTS directory has moved to ftp.freebsd.org and is now a bsd.port.mk variable so that we don't have to go fix all the ports when it moves again. Other than the minor nits above, your port is excellent. Thanks! From owner-freebsd-ports Tue Jun 3 02:30:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA18499 for ports-outgoing; Tue, 3 Jun 1997 02:30:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA18491; Tue, 3 Jun 1997 02:30:01 -0700 (PDT) Date: Tue, 3 Jun 1997 02:30:01 -0700 (PDT) Message-Id: <199706030930.CAA18491@hub.freebsd.org> To: freebsd-ports Cc: From: Satoshi Asami Subject: Re: ports/3396: update of the port of Mesa (now version 2.2) Reply-To: Satoshi Asami Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3396; it has been noted by GNATS. From: Satoshi Asami To: freebsd-gnats-submit@freebsd.org, jesse@cs.uni-magdeburg.de Cc: Subject: Re: ports/3396: update of the port of Mesa (now version 2.2) Date: Tue, 03 Jun 1997 02:25:32 -0700 Thanks, but please submit version changes as recursive diffs and mark any added/deleted files clearly in the message (see handbook). From owner-freebsd-ports Tue Jun 3 02:40:12 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA18799 for ports-outgoing; Tue, 3 Jun 1997 02:40:12 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA18791; Tue, 3 Jun 1997 02:40:08 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA19843; Tue, 3 Jun 1997 02:39:23 -0700 (PDT) Date: Tue, 3 Jun 1997 02:39:23 -0700 (PDT) Message-Id: <199706030939.CAA19843@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, jmz@FreeBSD.ORG Subject: Re: ports/3665 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: mtools port install fails Responsible-Changed-From-To: freebsd-ports->jmz Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 02:38:47 PDT 1997 Responsible-Changed-Why: I'm sure our famed Mr. maintainer is on top of this, so make sure nobody steps on his toes. :) From owner-freebsd-ports Tue Jun 3 02:40:49 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA18827 for ports-outgoing; Tue, 3 Jun 1997 02:40:49 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA18821; Tue, 3 Jun 1997 02:40:46 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA19922; Tue, 3 Jun 1997 02:40:01 -0700 (PDT) Date: Tue, 3 Jun 1997 02:40:01 -0700 (PDT) Message-Id: <199706030940.CAA19922@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, jmz@FreeBSD.ORG Subject: Re: ports/3205 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Mtools-3.0 attempts to flock() a disk partition, which fails with `operation not supported' Responsible-Changed-From-To: freebsd-ports->jmz Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 02:39:44 PDT 1997 Responsible-Changed-Why: I'm sure our famed Mr. maintainer is on top of this, so make sure nobody steps on his toes. :) From owner-freebsd-ports Tue Jun 3 02:41:20 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA18860 for ports-outgoing; Tue, 3 Jun 1997 02:41:20 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA18847; Tue, 3 Jun 1997 02:41:13 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA20032; Tue, 3 Jun 1997 02:40:29 -0700 (PDT) Date: Tue, 3 Jun 1997 02:40:29 -0700 (PDT) Message-Id: <199706030940.CAA20032@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, jmz@FreeBSD.ORG Subject: Re: ports/3455 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: mtools-3.6.tgz could have a better mtools.conf file Responsible-Changed-From-To: freebsd-ports->jmz Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 02:40:19 PDT 1997 Responsible-Changed-Why: I'm sure our famed Mr. maintainer is on top of this, so make sure nobody steps on his toes. :) From owner-freebsd-ports Tue Jun 3 02:46:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA19138 for ports-outgoing; Tue, 3 Jun 1997 02:46:31 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA19131 for ; Tue, 3 Jun 1997 02:46:28 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id CAA00891; Tue, 3 Jun 1997 02:46:26 -0700 (PDT) Date: Tue, 3 Jun 1997 02:46:26 -0700 (PDT) Message-Id: <199706030946.CAA00891@silvia.HIP.Berkeley.EDU> To: freebsd-ports@hub.freebsd.org In-reply-to: <199706030930.CAA18491@hub.freebsd.org> (message from Satoshi Asami on Tue, 3 Jun 1997 02:30:01 -0700 (PDT)) Subject: Re: ports/3396: update of the port of Mesa (now version 2.2) From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * Thanks, but please submit version changes as recursive diffs and mark * any * added/deleted files clearly in the message (see handbook). Let me point out that it's not me that inserted that ugly newline near the end of that line which was clearly less than 80 characters. Netscape sucks (but it's convenient for following up PRs). Satoshi From owner-freebsd-ports Tue Jun 3 03:22:55 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA20323 for ports-outgoing; Tue, 3 Jun 1997 03:22:55 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA20291; Tue, 3 Jun 1997 03:21:49 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id DAA20597; Tue, 3 Jun 1997 03:21:03 -0700 (PDT) Date: Tue, 3 Jun 1997 03:21:03 -0700 (PDT) Message-Id: <199706031021.DAA20597@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, markm@FreeBSD.ORG Subject: Re: ports/3699 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: listen() backlog in xinetd is too small (patch enclosed) Responsible-Changed-From-To: freebsd-ports->markm Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 03:20:39 PDT 1997 Responsible-Changed-Why: Mark, can you verify the patch and commit it? From owner-freebsd-ports Tue Jun 3 03:24:43 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA20392 for ports-outgoing; Tue, 3 Jun 1997 03:24:43 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA20361; Tue, 3 Jun 1997 03:24:02 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id DAA20732; Tue, 3 Jun 1997 03:23:17 -0700 (PDT) Date: Tue, 3 Jun 1997 03:23:17 -0700 (PDT) Message-Id: <199706031023.DAA20732@freefall.freebsd.org> To: vanilla@MinJe.com.TW, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3767 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Vtcl updated to 1.10 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 03:21:56 PDT 1997 State-Changed-Why: Thanks, committed. Please check the changes I made (especially the patch-aa "$Id$" smashing avoidance, which essentially made it a non-context diff). From owner-freebsd-ports Tue Jun 3 03:45:23 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA21548 for ports-outgoing; Tue, 3 Jun 1997 03:45:23 -0700 (PDT) Received: from pat.idi.ntnu.no (0@pat.idi.ntnu.no [129.241.103.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA21542 for ; Tue, 3 Jun 1997 03:45:20 -0700 (PDT) Received: from idt.unit.no (tegge@ikke.idi.ntnu.no [129.241.111.65]) by pat.idi.ntnu.no (8.8.5/8.8.5) with ESMTP id MAA03640; Tue, 3 Jun 1997 12:45:03 +0200 (MET DST) Message-Id: <199706031045.MAA03640@pat.idi.ntnu.no> To: roberto@keltia.freenix.fr Cc: ports@FreeBSD.ORG, perhaps@yes.no Subject: Re: perl5.004 In-Reply-To: Your message of "Sun, 1 Jun 1997 11:19:07 +0200" References: <19970601111907.20896@keltia.freenix.fr> X-Mailer: Mew version 1.06 on Emacs 19.34.1 Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="--Next_Part(Tue_Jun__3_12:44:01_1997)--" Date: Tue, 03 Jun 1997 12:45:03 +0200 From: Tor Egge Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk ----Next_Part(Tue_Jun__3_12:44:01_1997)-- Content-Type: Text/Plain; charset=us-ascii > The following fail: > > "ASCII" > "es" > "fi" > "ja" > "ko_KR.EUC" > "lt_LN.*" > "nl" > "no" > "sv" This can be `fixed'. An example patch is appended. - Tor Egge ----Next_Part(Tue_Jun__3_12:44:01_1997)-- Content-Type: Text/Plain; charset=iso-8859-1 Content-Description: "Norwegian time locale (1st try)" Content-Transfer-Encoding: quoted-printable Index: Makefile =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D RCS file: /home/ncvs/src/share/timedef/data/Makefile,v retrieving revision 1.15 diff -c -r1.15 Makefile *** Makefile 1997/03/25 16:16:56 1.15 --- Makefile 1997/06/02 01:52:10 *************** *** 13,18 **** --- 13,19 ---- is_IS.ISO_8859-1 \ it_IT.ISO_8859-1 \ ko_KR.EUC \ + no_NO.ISO_8859-1 \ pt_PT.ISO_8859-1 \ ru_SU.CP866 \ ru_SU.KOI8-R = *** /dev/null Tue Jun 3 12:02:56 1997 --- no_NO.ISO_8859-1.src Mon Jun 2 03:51:22 1997 *************** *** 0 **** --- 1,78 ---- + # $Id:$ + # + # WARNING: spaces may be essential at the end of lines + # WARNING: empty lines are essential too + # + # Short months names + # + Jan + Feb + Mar + Apr + Mai + Jun + Jul + Aug + Sep + Okt + Nov + Des + # + # Long months names + # + Januar + Februar + Mars + April + Mai + Juni + Juli + August + September + Oktober + November + Desember + # + # Short weekdays names + # (padded with a space to conform with other languages) + S=F8n + Man + Tir + Ons + Tor + Fre + L=F8r + # + # Long weekdays names + # + S=F8ndag + Mandag + Tirsdag + Onsdag + Torsdag + Fredag + L=F8rdag + # + # X_fmt + # + %H:%M:%S + # + # x_fmt + # + %d.%m.%y + # + # c_fmt + # + %a %e %b %X %Y + # + # am + # + am + # + # pm + # + pm + # + # date_fmt + # + %a %e %b %Y %X %Z ----Next_Part(Tue_Jun__3_12:44:01_1997)---- From owner-freebsd-ports Tue Jun 3 05:28:40 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA25323 for ports-outgoing; Tue, 3 Jun 1997 05:28:40 -0700 (PDT) Received: from nexis.net (customer-1.ican.net [198.133.36.101]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA25304 for ; Tue, 3 Jun 1997 05:28:31 -0700 (PDT) Received: from localhost (james@localhost) by nexis.net (8.8.5/8.8.5) with SMTP id IAA28049 for ; Tue, 3 Jun 1997 08:18:53 -0400 (EDT) Date: Tue, 3 Jun 1997 08:18:53 -0400 (EDT) From: James FitzGibbon To: freebsd-ports@freebsd.org Subject: spawnd Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I recall a message about someone doing a port of spawnd a while ago. It was a program to keep certain services going in case they crashed. I was about to import it; but can't find a PR on it or anything in the incoming directory on ftp.freebsd.org. Am I recalling this wrong ? Was the message perhaps just an 'this would be neat' message ? If someone has already ported this, please mail me. Otherwise, I do have a need for it and will be tackling it myself this afternoon. Thanks. -- j. From owner-freebsd-ports Tue Jun 3 05:57:34 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA26807 for ports-outgoing; Tue, 3 Jun 1997 05:57:34 -0700 (PDT) Received: from freebsd.scds.com (scds.ziplink.net [206.15.128.34]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA26800 for ; Tue, 3 Jun 1997 05:57:30 -0700 (PDT) Received: (from jseger@localhost) by freebsd.scds.com (8.8.5/8.8.4) id IAA07826 for ports@freebsd.org; Tue, 3 Jun 1997 08:04:27 -0400 (EDT) Date: Tue, 3 Jun 1997 08:04:27 -0400 (EDT) From: "Justin M. Seger" Message-Id: <199706031204.IAA07826@freebsd.scds.com> To: ports@freebsd.org Subject: net/iscp-dhcp Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Ooops, that last patch I sent for isc-dhcp was using an older version of the port. Here is a patch for the current source. -Justin Seger- diff -Nru isc-dhcp-old/Makefile isc-dhcp/Makefile --- isc-dhcp-old/Makefile Tue Jun 3 07:46:28 1997 +++ isc-dhcp/Makefile Tue Jun 3 07:49:21 1997 @@ -11,12 +11,7 @@ CATEGORIES= net MASTER_SITES= ftp://ftp.isc.org/isc/dhcp/ -MAINTAINER= ports@FreeBSD.org - -OSVERSION!= sysctl -n kern.osreldate -.if ${OSVERSION} >= 300000 -BROKEN= "currently doesn't compile for -current" -.endif +MAINTAINER= jseger@scds.com HAS_CONFIGURE= yes diff -Nru isc-dhcp-old/patches/patch-aa isc-dhcp/patches/patch-aa --- isc-dhcp-old/patches/patch-aa Wed Dec 31 19:00:00 1969 +++ isc-dhcp/patches/patch-aa Tue Jun 3 07:51:52 1997 @@ -0,0 +1,10 @@ +--- packet.c.old Tue Jun 3 07:50:51 1997 ++++ packet.c Tue Jun 3 07:51:34 1997 +@@ -51,6 +51,7 @@ + #include "includes/netinet/ip.h" + #include "includes/netinet/udp.h" + #include "includes/netinet/if_ether.h" ++#include + + static u_int32_t checksum PROTO ((unsigned char *, int, u_int32_t)); + static u_int32_t wrapsum PROTO ((u_int32_t)); From owner-freebsd-ports Tue Jun 3 08:30:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA04166 for ports-outgoing; Tue, 3 Jun 1997 08:30:05 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA04152; Tue, 3 Jun 1997 08:30:02 -0700 (PDT) Resent-Date: Tue, 3 Jun 1997 08:30:02 -0700 (PDT) Resent-Message-Id: <199706031530.IAA04152@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, Simon Marlow Received: from vanuata (vanuata.dcs.gla.ac.uk [130.209.240.50]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA03706 for ; Tue, 3 Jun 1997 08:22:29 -0700 (PDT) Received: from solander.dcs.gla.ac.uk (actually host solander) by vanuata with SMTP (MMTA) with ESMTP; Tue, 3 Jun 1997 16:21:59 +0100 Received: (from simonm@localhost) by solander.dcs.gla.ac.uk (8.8.5/8.7.3) id QAA01114; Tue, 3 Jun 1997 16:21:56 +0100 (BST) Message-Id: <199706031521.QAA01114@solander.dcs.gla.ac.uk> Date: Tue, 3 Jun 1997 16:21:56 +0100 (BST) From: Simon Marlow Reply-To: Simon Marlow To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3768: upgrade of cgoban port to 1.7.1 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3768 >Category: ports >Synopsis: upgrade of cgoban port to 1.7.1 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue Jun 3 08:30:01 PDT 1997 >Last-Modified: >Originator: Simon Marlow >Organization: University of Glasgow >Release: FreeBSD 2.2-STABLE i386 >Environment: >Description: >How-To-Repeat: >Fix: apply the following patch in ports/games/cgoban: *** Makefile~ Wed Mar 5 14:06:42 1997 --- Makefile Tue Jun 3 16:10:28 1997 *************** *** 6,12 **** # $Id: Makefile,v 1.2 1997/03/05 14:06:42 tg Exp $ # ! DISTNAME= cgoban-1.6.8 CATEGORIES= games MASTER_SITES= ftp://igs.nuri.net/Go/clients/ --- 6,12 ---- # $Id: Makefile,v 1.2 1997/03/05 14:06:42 tg Exp $ # ! DISTNAME= cgoban-1.7.1 CATEGORIES= games MASTER_SITES= ftp://igs.nuri.net/Go/clients/ *** files/md5~ Tue Jun 3 16:10:24 1997 --- files/md5 Tue Jun 3 16:12:18 1997 *************** *** 1 **** ! MD5 (cgoban-1.6.8.tar.gz) = ffb5194fee559d776b730ceebcb826eb --- 1 ---- ! MD5 (cgoban-1.7.1.tar.gz) = fe8b7fc156933f9e0d47b70ff5089203 >Audit-Trail: >Unformatted: From owner-freebsd-ports Tue Jun 3 10:28:33 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA10525 for ports-outgoing; Tue, 3 Jun 1997 10:28:33 -0700 (PDT) Received: from mailsrv2.zib.de (mailsrv2.zib.de [130.73.121.11]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id KAA10520 for ; Tue, 3 Jun 1997 10:28:30 -0700 (PDT) Received: from soft13.zib.de by mailsrv2.zib.de (SMI-8.6/SMI-SVR4) id TAA07058; Tue, 3 Jun 1997 19:28:16 +0200 Received: by soft13.zib.de (SMI-8.6/SMI-SVR4) id TAA07024; Tue, 3 Jun 1997 19:28:15 +0200 Date: Tue, 3 Jun 1997 19:28:15 +0200 From: schneider@zib.de (Wolfram Schneider) Message-Id: <199706031728.TAA07024@soft13.zib.de> To: ports@freebsd.org Subject: most wanted ports statistic MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk The top 50 search queries from the FreeBSD Ports Changes script (http://www.de.freebsd.org/de/cgi/ports.cgi), for a full list see http://www.de.freebsd.org/de/stat/ports. Web and network applications are the winners. Wolfram 71 java 69 netscape 44 ppp 42 apache 39 jdk 31 perl 29 tcl 29 bind 28 irc 26 samba 26 popper 25 squid 25 snmp 24 ftp 23 pop 22 gcc 21 dhcp 19 ^gmake-3.75 18 top 18 proxy 18 pico 18 linux 17 fax 16 ssh 15 xv 15 ups 15 tcsh 15 socket 15 netatalk 15 natd 15 mail 15 inn 15 ^xpm-3.4j 14 tk 14 msql 14 fvwm 14 afterstep 14 Java 13 staroffice 13 screen 13 firewall 13 StarOffice 12 tex 12 quake 12 metamail 12 latex 11 motif 11 lynx 11 kerberos 11 kaffe From owner-freebsd-ports Tue Jun 3 11:50:19 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA15871 for ports-outgoing; Tue, 3 Jun 1997 11:50:19 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA15864; Tue, 3 Jun 1997 11:50:10 -0700 (PDT) From: Masafumi NAKANE Received: (from max@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id LAA23300; Tue, 3 Jun 1997 11:49:22 -0700 (PDT) Date: Tue, 3 Jun 1997 11:49:22 -0700 (PDT) Message-Id: <199706031849.LAA23300@freefall.freebsd.org> To: simonm@dcs.gla.ac.uk, max@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3768 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: upgrade of cgoban port to 1.7.1 State-Changed-From-To: open-closed State-Changed-By: max State-Changed-When: Tue Jun 3 11:48:58 PDT 1997 State-Changed-Why: The update is done. Thanks! From owner-freebsd-ports Tue Jun 3 11:57:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA16397 for ports-outgoing; Tue, 3 Jun 1997 11:57:05 -0700 (PDT) Received: from crh.cl.msu.edu (crh.cl.msu.edu [35.8.1.24]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA16392 for ; Tue, 3 Jun 1997 11:56:58 -0700 (PDT) Received: (from henrich@localhost) by crh.cl.msu.edu (8.8.5/8.8.5) id OAA23858; Tue, 3 Jun 1997 14:56:46 -0400 (EDT) Message-ID: <19970603145645.35810@crh.cl.msu.edu> Date: Tue, 3 Jun 1997 14:56:45 -0400 From: Charles Henrich To: Satoshi Asami Cc: freebsd-ports@FreeBSD.ORG Subject: Re: ispell port requires EMACS?! References: <19970603021201.57042@crh.cl.msu.edu> <199706030654.XAA17932@silvia.HIP.Berkeley.EDU> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.75 In-Reply-To: <199706030654.XAA17932@silvia.HIP.Berkeley.EDU>; from Satoshi Asami on Mon, Jun 02, 1997 at 11:54:20PM -0700 X-Operating-System: FreeBSD 2.2.2-RELEASE Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On the subject of Re: ispell port requires EMACS?!, Satoshi Asami stated: > * I just tried to install the ispell port and the first thing it rudely tried to > * do is go get that behemoth Emacs and install it on my system. I commented out > * that dependency and everything worked just peachy keen, so might I ask why it > * is there? > > I believe it needs it to byte-compile an .elc file. Try "make > package" and see if everything really worked ok. Well it fails when trying to tar at the emacs files, but other than that.. -Crh Charles Henrich Michigan State University henrich@msu.edu http://pilot.msu.edu/~henrich From owner-freebsd-ports Tue Jun 3 12:16:59 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA17416 for ports-outgoing; Tue, 3 Jun 1997 12:16:59 -0700 (PDT) Received: from mail.cdsnet.net (mail.cdsnet.net [204.118.244.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA17411 for ; Tue, 3 Jun 1997 12:16:56 -0700 (PDT) Received: from mail.cdsnet.net (mail.cdsnet.net [204.118.244.5]) by mail.cdsnet.net (8.8.5/8.7.3) with SMTP id MAA28110 for ; Tue, 3 Jun 1997 12:16:54 -0700 (PDT) Date: Tue, 3 Jun 1997 12:16:54 -0700 (PDT) From: Jaye Mathisen To: ports@freebsd.org Subject: Minor diablo breakage: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk make install Installing /usr/local/etc/rc.d/diablo.sh startup script cannot create /usr/local/etc/rc.d/diablo.sh: directory nonexistent Probably should mkdir -p /usr/local/etc/rc.d This is on a relatively new 2.2.2 install. From owner-freebsd-ports Tue Jun 3 12:28:27 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA17938 for ports-outgoing; Tue, 3 Jun 1997 12:28:27 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA17930; Tue, 3 Jun 1997 12:28:20 -0700 (PDT) From: Masafumi NAKANE Received: (from max@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id MAA23512; Tue, 3 Jun 1997 12:27:32 -0700 (PDT) Date: Tue, 3 Jun 1997 12:27:32 -0700 (PDT) Message-Id: <199706031927.MAA23512@freefall.freebsd.org> To: jonny@mailhost.coppe.ufrj.br, max@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3734 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port: xtoolwait-1.1 State-Changed-From-To: open-closed State-Changed-By: max State-Changed-When: Tue Jun 3 12:27:05 PDT 1997 State-Changed-Why: The port has been imported with slight modification. From owner-freebsd-ports Tue Jun 3 13:13:50 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA20166 for ports-outgoing; Tue, 3 Jun 1997 13:13:50 -0700 (PDT) Received: from nexis.net (customer-1.ican.net [198.133.36.101]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id NAA20144 for ; Tue, 3 Jun 1997 13:13:46 -0700 (PDT) Received: from localhost (james@localhost) by nexis.net (8.8.5/8.8.5) with SMTP id QAA03796; Tue, 3 Jun 1997 16:12:41 -0400 (EDT) Date: Tue, 3 Jun 1997 16:12:28 -0400 (EDT) From: James FitzGibbon To: Jaye Mathisen cc: ports@FreeBSD.ORG Subject: Re: Minor diablo breakage: In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Jaye Mathisen wrote: > make install > Installing /usr/local/etc/rc.d/diablo.sh startup script > cannot create /usr/local/etc/rc.d/diablo.sh: directory nonexistent > > > Probably should mkdir -p /usr/local/etc/rc.d > > This is on a relatively new 2.2.2 install. I thought mtree is supposed to create that for you. Satoshi ? -- j. From owner-freebsd-ports Tue Jun 3 13:19:15 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA20442 for ports-outgoing; Tue, 3 Jun 1997 13:19:15 -0700 (PDT) Received: from plaut.de (ns.plaut.de [194.39.177.166]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id NAA20430 for ; Tue, 3 Jun 1997 13:18:56 -0700 (PDT) Received: from totum.plaut.de (totum.plaut.de [194.39.177.9]) by plaut.de (8.6.12/8.6.12) with ESMTP id WAA22320 for ; Tue, 3 Jun 1997 22:18:52 +0200 Received: from localhost (root@localhost) by totum.plaut.de (8.8.5/8.7.3) with SMTP id WAA15585 for ; Tue, 3 Jun 1997 22:18:52 +0200 (MET DST) Date: Tue, 3 Jun 1997 22:18:52 +0200 (MET DST) From: Michael Reifenberger To: FreeBSD-Ports Subject: tkined 1.4.5 failure. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, while scanning a oversea-net I get an error. It comes up to the point where it prints the links: Network X.X.X.X (1, 0, 0). 66 networks discovered in 14 seconds. 78 gateways discovered in 0 seconds. 158 links discovered in 22 seconds. 6 nodes merged in 2 seconds. Then I get: (totum)(root) # can't read "address(142)": no such element in array while executing "set ip $address($id)..." ("foreach" body line 2) invoked from within "foreach id [array names networks] { set ip $address($id) set bytes [split $ip .] set class [ip_class $ip] set type "(class $class)" switch $class ..." (procedure "talk_to_ined" line 78) invoked from within "talk_to_ined" invoked from within "if {[info exists nodes]} { discover_traces discover_snmp discover_masks discover_fips discover_networks discover_gateways discover_links merge ..." (procedure "Discover IP Network" line 45) invoked from within "{Discover IP Network} {}" Does anyone else see this error? Bye! ---- Michael Reifenberger Plaut Software GmbH, R/3 Basis From owner-freebsd-ports Tue Jun 3 13:22:55 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA20674 for ports-outgoing; Tue, 3 Jun 1997 13:22:55 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id NAA20656; Tue, 3 Jun 1997 13:22:30 -0700 (PDT) From: Masafumi NAKANE Received: (from max@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id NAA00248; Tue, 3 Jun 1997 13:21:41 -0700 (PDT) Date: Tue, 3 Jun 1997 13:21:41 -0700 (PDT) Message-Id: <199706032021.NAA00248@freefall.freebsd.org> To: rhwang@bigpanda.com, max@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3732 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: submission of new port - most-4.7 State-Changed-From-To: open-closed State-Changed-By: max State-Changed-When: Tue Jun 3 13:21:09 PDT 1997 State-Changed-Why: The port is imported with slight modification. From owner-freebsd-ports Tue Jun 3 14:18:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA23247 for ports-outgoing; Tue, 3 Jun 1997 14:18:28 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA23240 for ; Tue, 3 Jun 1997 14:18:25 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id OAA02876; Tue, 3 Jun 1997 14:18:04 -0700 (PDT) Date: Tue, 3 Jun 1997 14:18:04 -0700 (PDT) Message-Id: <199706032118.OAA02876@silvia.HIP.Berkeley.EDU> To: james@nexis.net CC: mrcpu@cdsnet.net, ports@FreeBSD.ORG In-reply-to: (message from James FitzGibbon on Tue, 3 Jun 1997 16:12:28 -0400 (EDT)) Subject: Re: Minor diablo breakage: From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * > make install * > Installing /usr/local/etc/rc.d/diablo.sh startup script * > cannot create /usr/local/etc/rc.d/diablo.sh: directory nonexistent * > * > * > Probably should mkdir -p /usr/local/etc/rc.d * > * > This is on a relatively new 2.2.2 install. * * I thought mtree is supposed to create that for you. Satoshi ? James is right. Try "grep rc.d /etc/mtree/BSD.local.dist". Satoshi From owner-freebsd-ports Tue Jun 3 14:35:53 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA24455 for ports-outgoing; Tue, 3 Jun 1997 14:35:53 -0700 (PDT) Received: from mail.cdsnet.net (mail.cdsnet.net [204.118.244.5]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA24449 for ; Tue, 3 Jun 1997 14:35:51 -0700 (PDT) Received: from mail.cdsnet.net (mail.cdsnet.net [204.118.244.5]) by mail.cdsnet.net (8.8.5/8.7.3) with SMTP id OAA20774; Tue, 3 Jun 1997 14:35:41 -0700 (PDT) Date: Tue, 3 Jun 1997 14:35:41 -0700 (PDT) From: Jaye Mathisen To: Satoshi Asami cc: james@nexis.net, ports@FreeBSD.ORG Subject: Re: Minor diablo breakage: In-Reply-To: <199706032118.OAA02876@silvia.HIP.Berkeley.EDU> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk All I know is I installed 2.2.2 about 4 hours ago on a clean box, and went to ports and installed diablo. Makes no difference to me. On Tue, 3 Jun 1997, Satoshi Asami wrote: > * > make install > * > Installing /usr/local/etc/rc.d/diablo.sh startup script > * > cannot create /usr/local/etc/rc.d/diablo.sh: directory nonexistent > * > > * > > * > Probably should mkdir -p /usr/local/etc/rc.d > * > > * > This is on a relatively new 2.2.2 install. > * > * I thought mtree is supposed to create that for you. Satoshi ? > > James is right. Try "grep rc.d /etc/mtree/BSD.local.dist". > > Satoshi > From owner-freebsd-ports Tue Jun 3 14:46:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA25007 for ports-outgoing; Tue, 3 Jun 1997 14:46:28 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA25002 for ; Tue, 3 Jun 1997 14:46:25 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id OAA02982; Tue, 3 Jun 1997 14:46:18 -0700 (PDT) Date: Tue, 3 Jun 1997 14:46:18 -0700 (PDT) Message-Id: <199706032146.OAA02982@silvia.HIP.Berkeley.EDU> To: mrcpu@cdsnet.net CC: james@nexis.net, ports@freebsd.org In-reply-to: (message from Jaye Mathisen on Tue, 3 Jun 1997 14:35:41 -0700 (PDT)) Subject: Re: Minor diablo breakage: From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * All I know is I installed 2.2.2 about 4 hours ago on a clean box, and went * to ports and installed diablo. * * Makes no difference to me. Maybe it wasn't clear enough, but I am trying to help you diagnose the problem. Can you please do what I said, so we can "know" better??? * > James is right. Try "grep rc.d /etc/mtree/BSD.local.dist". ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ While you are there, please "grep Id /etc/mtree/BSD.local.dist" too. Satoshi From owner-freebsd-ports Tue Jun 3 14:48:29 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA25176 for ports-outgoing; Tue, 3 Jun 1997 14:48:29 -0700 (PDT) Received: from mail.scsn.net (scsn.net [206.25.246.12]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA25167 for ; Tue, 3 Jun 1997 14:48:25 -0700 (PDT) Received: from cola176.scsn.net ([206.25.247.176]) by mail.scsn.net (Post.Office MTA v3.1 release PO203a ID# 0-32322U5000L100S10000) with ESMTP id AAA179 for ; Tue, 3 Jun 1997 17:41:16 -0400 Received: (from root@localhost) by cola176.scsn.net (8.8.5/8.8.5) id RAA01656; Tue, 3 Jun 1997 17:48:12 -0400 (EDT) Message-ID: <19970603174811.13985@scsn.net> Date: Tue, 3 Jun 1997 17:48:12 -0400 From: "Donald J. Maddox" To: ports@FreeBSD.org Subject: Ports 'make install' and mtree Reply-To: dmaddox@scsn.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 Sender: owner-ports@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk I have observed for quite a while now that whenever I do a 'make install' of a port, the ownership of /usr/local gets changed to root:wheel, and when I do a 'make hierarchy' from /usr/src, it gets changed back to bin:bin. Why does a 'make install' of a port change the ownership to something other than what mtree(8) thinks it should be? Should it be doing this? From owner-freebsd-ports Tue Jun 3 15:13:21 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA26315 for ports-outgoing; Tue, 3 Jun 1997 15:13:21 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA26309 for ; Tue, 3 Jun 1997 15:13:18 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id PAA03100; Tue, 3 Jun 1997 15:12:54 -0700 (PDT) Date: Tue, 3 Jun 1997 15:12:54 -0700 (PDT) Message-Id: <199706032212.PAA03100@silvia.HIP.Berkeley.EDU> To: jseger@freebsd.scds.com CC: ports@freebsd.org In-reply-to: <199706031204.IAA07826@freebsd.scds.com> (jseger@freebsd.scds.com) Subject: Re: net/iscp-dhcp From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * Ooops, that last patch I sent for isc-dhcp was using an older version of the * port. Here is a patch for the current source. Thanks, verified and committed. Satoshi From owner-freebsd-ports Tue Jun 3 15:25:09 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA26869 for ports-outgoing; Tue, 3 Jun 1997 15:25:09 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA26853; Tue, 3 Jun 1997 15:24:35 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id PAA01330; Tue, 3 Jun 1997 15:23:46 -0700 (PDT) Date: Tue, 3 Jun 1997 15:23:46 -0700 (PDT) Message-Id: <199706032223.PAA01330@freefall.freebsd.org> To: ssigala@globalnet.it, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3457 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New ports for cutils 1.3.3 and umatrix State-Changed-From-To: open-analyzed State-Changed-By: asami State-Changed-When: Tue Jun 3 15:22:25 PDT 1997 State-Changed-Why: Thanks, imported umatrix and moved source tarball to LOCAL_PORTS. As for cutils, please submit it as a "diff -ur". (Please read the handbook's section on port upgrades.) From owner-freebsd-ports Tue Jun 3 15:27:02 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA26995 for ports-outgoing; Tue, 3 Jun 1997 15:27:02 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA26988; Tue, 3 Jun 1997 15:26:49 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id PAA01411; Tue, 3 Jun 1997 15:26:00 -0700 (PDT) Date: Tue, 3 Jun 1997 15:26:00 -0700 (PDT) Message-Id: <199706032226.PAA01411@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, tg@FreeBSD.ORG Subject: Re: ports/3413 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port: cs-0.3 Responsible-Changed-From-To: freebsd-ports->tg Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 15:25:35 PDT 1997 Responsible-Changed-Why: Seems like Thomas already imported cs-0.3. Please check and close this PR. From owner-freebsd-ports Tue Jun 3 15:45:27 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA28243 for ports-outgoing; Tue, 3 Jun 1997 15:45:27 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA28234; Tue, 3 Jun 1997 15:45:22 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id PAA01603; Tue, 3 Jun 1997 15:44:33 -0700 (PDT) Date: Tue, 3 Jun 1997 15:44:33 -0700 (PDT) Message-Id: <199706032244.PAA01603@freefall.freebsd.org> To: eagriff@global2000.net, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3466 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: FreeBSD origional port of auto loan payments calculator State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 15:43:45 PDT 1997 State-Changed-Why: Thanks, committed. By the way, these are my changes: === diff -ru apc/Makefile apc.new/Makefile --- apc/Makefile Thu May 1 14:16:10 1997 +++ apc.new/Makefile Tue Jun 3 15:37:24 1997 @@ -1,26 +1,24 @@ -# New ports collection makefile for: apc -# For apc utility happily subbmitted to FreeBSD Project -# for consideration for addition to the FreeBSD ports -# Collection. +# New ports collection makefile for: apc +# Version required: 1.0.1-beta +# Date created: May 1 1997 +# Whom: Eric A. Griff # -# By: Eric A. Griff +# $Id$ # DISTNAME= apc-1.0.1-beta PKGNAME= apc-1.0.1b -CATEGORIES= # *UNKNOWN* +CATEGORIES= math MASTER_SITES= http://members.global2000.net/~eagriff/ -MAINTAINER= # *UNKNOWN* me maybe? (eagriff@global2000.net) +MAINTAINER= eagriff@global2000.net -LIB_DEPENDS= xforms\\.0\\.8:${PORTSDIR}/x11/xforms +LIB_DEPENDS= xforms\\.0\\.86:${PORTSDIR}/x11/xforms -ALL_TARGET= "apc" +ALL_TARGET= apc USE_X11= YES -WRKSRC= ${WRKDIR}/apc-1.0.1-beta do-install: - @strip ${WRKSRC}/apc @${INSTALL_PROGRAM} ${WRKSRC}/apc ${PREFIX}/bin/ .include === Note that ${INSTALL_PROGRAM} already strips the binaries. From owner-freebsd-ports Tue Jun 3 15:56:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA29037 for ports-outgoing; Tue, 3 Jun 1997 15:56:39 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA29022; Tue, 3 Jun 1997 15:56:34 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id PAA01858; Tue, 3 Jun 1997 15:55:42 -0700 (PDT) Date: Tue, 3 Jun 1997 15:55:42 -0700 (PDT) Message-Id: <199706032255.PAA01858@freefall.freebsd.org> To: pgiffuni@FPS.biblos.unal.edu.co, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3482 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: SlingShot (new) port State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 15:54:38 PDT 1997 State-Changed-Why: Added xview dependencies and imported. Here are my changes: === diff -ru slingshot/Makefile slingshot.new/Makefile --- slingshot/Makefile Fri May 2 14:38:58 1997 +++ slingshot.new/Makefile Tue Jun 3 15:41:01 1997 @@ -1,31 +1,34 @@ # New ports collection makefile for: SlingShot # Version required: 2.1 -# Date created: 5 March 1997 -# Whom: I +# Date created: 5 March 1997 +# Whom: pgiffuni@FPS.biblos.unal.edu.co # -# $Id: porting.sgml,v 1.2.4.3 1997/11/16 01:59:13 pgs Exp $ +# $Id$ # -PKGNAME= slingshot-2.1 + DISTNAME= SlingShot2.1 -CATEGORIES= X11 +PKGNAME= slingshot-2.1 +CATEGORIES= x11 MASTER_SITES= ftp://ftp.cdrom.com/pub/X11/R5contrib/ -# ftp.X.org sites ? EXTRACT_SUFX= .tar.Z MAINTAINER= pgiffuni@FPS.biblos.unal.edu.co +LIB_DEPENDS= xview\\.3\\.:${PORTSDIR}/x11/xview-lib + WRKSRC= $(WRKDIR)/sspkg2.1 USE_X11= yes USE_GMAKE= yes - MAKE_ENV= OPENWINHOME=$(X11BASE) + pre-patch: - cp $(WRKSRC)/config.sunos4x $(WRKSRC)/config.fbsd + ${CP} $(WRKSRC)/config.sunos4x $(WRKSRC)/config.fbsd + post-install: .if !defined(NOPORTDOCS) - mkdir -p ${PREFIX}/share/doc/SlingShot - cp ${WRKSRC}/README ${PREFIX}/share/doc/SlingShot - cp ${WRKSRC}/doc/*.ps ${PREFIX}/share/doc/SlingShot + ${MKDIR} ${PREFIX}/share/doc/SlingShot + ${INSTALL_DATA} ${WRKSRC}/README ${PREFIX}/share/doc/SlingShot + ${INSTALL_DATA} ${WRKSRC}/doc/*.ps ${PREFIX}/share/doc/SlingShot .endif .include === I would think that an experienced porter like you would know the way around ports' Makefiles. :) From owner-freebsd-ports Tue Jun 3 16:05:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA29633 for ports-outgoing; Tue, 3 Jun 1997 16:05:31 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA29597; Tue, 3 Jun 1997 16:05:04 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA02163; Tue, 3 Jun 1997 16:04:15 -0700 (PDT) Date: Tue, 3 Jun 1997 16:04:15 -0700 (PDT) Message-Id: <199706032304.QAA02163@freefall.freebsd.org> To: maurice@planet.serc.rmit.edu.au, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3215 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Update to Gnat port State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 16:03:38 PDT 1997 State-Changed-Why: Superseded by 3687. From owner-freebsd-ports Tue Jun 3 16:10:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA29861 for ports-outgoing; Tue, 3 Jun 1997 16:10:47 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA29792; Tue, 3 Jun 1997 16:09:54 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA02304; Tue, 3 Jun 1997 16:09:04 -0700 (PDT) Date: Tue, 3 Jun 1997 16:09:04 -0700 (PDT) Message-Id: <199706032309.QAA02304@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, markm@FreeBSD.ORG Subject: Re: ports/3499 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: exim port out of date Responsible-Changed-From-To: freebsd-ports->markm Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 16:08:09 PDT 1997 Responsible-Changed-Why: According to our records, Mark is the maintainer. From owner-freebsd-ports Tue Jun 3 16:28:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA00843 for ports-outgoing; Tue, 3 Jun 1997 16:28:06 -0700 (PDT) Received: from godzilla.zeta.org.au (godzilla.zeta.org.au [203.2.228.19]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA00816 for ; Tue, 3 Jun 1997 16:28:01 -0700 (PDT) Received: (from bde@localhost) by godzilla.zeta.org.au (8.8.5/8.6.9) id JAA02401; Wed, 4 Jun 1997 09:23:39 +1000 Date: Wed, 4 Jun 1997 09:23:39 +1000 From: Bruce Evans Message-Id: <199706032323.JAA02401@godzilla.zeta.org.au> To: dmaddox@scsn.net, ports@FreeBSD.ORG Subject: Re: Ports 'make install' and mtree Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > I have observed for quite a while now that whenever I do a 'make install' >of a port, the ownership of /usr/local gets changed to root:wheel, and when >I do a 'make hierarchy' from /usr/src, it gets changed back to bin:bin. This is caused by: - /usr/local is owned by bin:bin according to /etc/mtree/BSD.usr.dist - "." is owned by root:wheel according to /etc/mtree/BSD.local.dist - `make hierarchy' goes through the mtree files in a strange (alphabetical) order, so BSD.local.dist is done before BSD.usr.dist. It's reasonable for mount points to have different permissions than the root directory of mounted file systems, but the difference is probably backwards here. > Why does a 'make install' of a port change the ownership to something >other than what mtree(8) thinks it should be? Should it be doing this? `make install' runs mtree on /etc/mtree/BSD.local.dist and doesn't run it on BSD.usr.dist. This is better than pkg_add, which runs mtree on stale copies of BSD.local.dist in packages, so that you can't fix this problem or others in your local copy of BSD.local.dist. Bruce From owner-freebsd-ports Tue Jun 3 16:44:42 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA01723 for ports-outgoing; Tue, 3 Jun 1997 16:44:42 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA01640; Tue, 3 Jun 1997 16:43:45 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA03282; Tue, 3 Jun 1997 16:42:54 -0700 (PDT) Date: Tue, 3 Jun 1997 16:42:54 -0700 (PDT) Message-Id: <199706032342.QAA03282@freefall.freebsd.org> To: Nakai@Mlab.t.u-tokyo.ac.jp, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3715 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port: imlib (graphics) State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 16:42:29 PDT 1997 State-Changed-Why: Thanks, committed. Minor changes: === diff -ru imlib/Makefile imlib.new/Makefile --- imlib/Makefile Wed May 28 07:20:34 1997 +++ imlib.new/Makefile Tue Jun 3 16:33:56 1997 @@ -8,7 +8,7 @@ DISTNAME= imlib PKGNAME= imlib-0.1 -CATEGORIES= x11 +CATEGORIES= graphics MASTER_SITES= ftp://ftp.cse.unsw.edu.au/pub/users/s2154962/ DISTFILES= imlib_DR-0.1.tar.gz @@ -22,6 +22,6 @@ USE_IMAKE= yes post-install: - /sbin/ldconfig -m ${PREFIX}/lib + ${LDCONFIG} -m ${PREFIX}/lib .include diff -ru imlib/files/md5 imlib.new/files/md5 --- imlib/files/md5 Sat May 24 23:18:19 1997 +++ imlib.new/files/md5 Tue Jun 3 16:36:06 1997 @@ -1,2 +1 @@ -MD5 (enl_DR-0.9.tar.gz) = a1b58734acc54d6387154139f8f4f014 MD5 (imlib_DR-0.1.tar.gz) = ab4d7e66f893d4b695b7a4e3c982d353 === From owner-freebsd-ports Tue Jun 3 16:45:16 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA01798 for ports-outgoing; Tue, 3 Jun 1997 16:45:16 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA01725; Tue, 3 Jun 1997 16:44:42 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA03360; Tue, 3 Jun 1997 16:43:52 -0700 (PDT) Date: Tue, 3 Jun 1997 16:43:52 -0700 (PDT) Message-Id: <199706032343.QAA03360@freefall.freebsd.org> To: m230761@ingenieria.ingsala.unal.edu.co, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/2379 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New URT port State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 16:43:08 PDT 1997 State-Changed-Why: Thanks, committed. I made so many changes so I'm not going to include the diff here. By the way, should I add netpbm to RUN_DEPENDS too? From owner-freebsd-ports Tue Jun 3 16:48:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA01942 for ports-outgoing; Tue, 3 Jun 1997 16:48:14 -0700 (PDT) Received: from mail.scsn.net (scsn.net [206.25.246.12]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA01937 for ; Tue, 3 Jun 1997 16:48:10 -0700 (PDT) Received: from cola59.scsn.net ([206.25.247.59]) by mail.scsn.net (Post.Office MTA v3.1 release PO203a ID# 0-32322U5000L100S10000) with ESMTP id AAA150; Tue, 3 Jun 1997 19:39:32 -0400 Received: (from root@localhost) by cola59.scsn.net (8.8.5/8.8.5) id TAA00560; Tue, 3 Jun 1997 19:46:24 -0400 (EDT) Message-ID: <19970603194623.59411@scsn.net> Date: Tue, 3 Jun 1997 19:46:23 -0400 From: "Donald J. Maddox" To: Bruce Evans Cc: ports@FreeBSD.ORG Subject: Re: Ports 'make install' and mtree Reply-To: dmaddox@scsn.net References: <199706032323.JAA02401@godzilla.zeta.org.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 In-Reply-To: <199706032323.JAA02401@godzilla.zeta.org.au>; from Bruce Evans on Wed, Jun 04, 1997 at 09:23:39AM +1000 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, Jun 04, 1997 at 09:23:39AM +1000, Bruce Evans wrote: > > I have observed for quite a while now that whenever I do a 'make install' > >of a port, the ownership of /usr/local gets changed to root:wheel, and when > >I do a 'make hierarchy' from /usr/src, it gets changed back to bin:bin. > > This is caused by: > - /usr/local is owned by bin:bin according to /etc/mtree/BSD.usr.dist > - "." is owned by root:wheel according to /etc/mtree/BSD.local.dist > - `make hierarchy' goes through the mtree files in a strange (alphabetical) > order, so BSD.local.dist is done before BSD.usr.dist. > > It's reasonable for mount points to have different permissions than the > root directory of mounted file systems, but the difference is probably > backwards here. > Ok, thanks for explaining this so clearly... It's not really a problem, but it was driving me crazy trying to figure out why it was happening :-/ > > Why does a 'make install' of a port change the ownership to something > >other than what mtree(8) thinks it should be? Should it be doing this? > > `make install' runs mtree on /etc/mtree/BSD.local.dist and doesn't run > it on BSD.usr.dist. > > This is better than pkg_add, which runs mtree on stale copies of > BSD.local.dist in packages, so that you can't fix this problem or > others in your local copy of BSD.local.dist. > > Bruce Blech. Yet another good reason not to use packages. I never use packages anyway, since I run -current, and -current has a tendency to break 'em and require a recompile anyway :-) From owner-freebsd-ports Tue Jun 3 16:51:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA02113 for ports-outgoing; Tue, 3 Jun 1997 16:51:03 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA02077; Tue, 3 Jun 1997 16:50:29 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA03493; Tue, 3 Jun 1997 16:49:39 -0700 (PDT) Date: Tue, 3 Jun 1997 16:49:39 -0700 (PDT) Message-Id: <199706032349.QAA03493@freefall.freebsd.org> To: rssh@satori.ipri.kiev.ua, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3756 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: port of SimPack State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 16:49:21 PDT 1997 State-Changed-Why: Superseded by 3758. From owner-freebsd-ports Tue Jun 3 16:51:13 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA02165 for ports-outgoing; Tue, 3 Jun 1997 16:51:13 -0700 (PDT) Received: from alpha.xerox.com (alpha.Xerox.COM [13.1.64.93]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id QAA02140 for ; Tue, 3 Jun 1997 16:51:08 -0700 (PDT) Received: from crevenia.parc.xerox.com ([13.2.116.11]) by alpha.xerox.com with SMTP id <18277(5)>; Tue, 3 Jun 1997 16:50:32 PDT Received: from localhost by crevenia.parc.xerox.com with SMTP id <177489>; Tue, 3 Jun 1997 16:50:13 -0700 To: asami@cs.berkeley.edu (Satoshi Asami) cc: freebsd-ports@freebsd.org Subject: Re: ispell port requires EMACS?! In-reply-to: Your message of "Mon, 02 Jun 97 23:54:20 PDT." <199706030654.XAA17932@silvia.HIP.Berkeley.EDU> Date: Tue, 3 Jun 1997 16:50:08 PDT From: Bill Fenner Message-Id: <97Jun3.165013pdt.177489@crevenia.parc.xerox.com> Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk asami@cs.berkeley.edu (Satoshi Asami) wrote: >I believe it needs it to byte-compile an .elc file. Try "make >package" and see if everything really worked ok. Sounds like this is one of the places where the package-building dependencies are different than the building-to-use-on-this-system dependenices. If you're making the package, then you want to byte-compile the .elc file for Emacs users that want to use the package, but if you don't use Emacs then you have no use for a byte-compiled .elc file anyway. Bill From owner-freebsd-ports Tue Jun 3 16:52:23 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA02233 for ports-outgoing; Tue, 3 Jun 1997 16:52:23 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA02221; Tue, 3 Jun 1997 16:52:14 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA03678; Tue, 3 Jun 1997 16:51:24 -0700 (PDT) Date: Tue, 3 Jun 1997 16:51:24 -0700 (PDT) Message-Id: <199706032351.QAA03678@freefall.freebsd.org> To: rssh@satori.ipri.kiev.ua, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3757 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: port of simpack (I forgott to write the name of file in prev.) State-Changed-From-To: open-analyzed State-Changed-By: asami State-Changed-When: Tue Jun 3 16:50:15 PDT 1997 State-Changed-Why: Thanks, but the Makefile is too big. Can you perhaps break some sections into file/Makefile and just copy that to ${WRKSRC}? Also, please read the handbook's porting section and arrange the port's Makefile according to it. From owner-freebsd-ports Tue Jun 3 16:55:38 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA02464 for ports-outgoing; Tue, 3 Jun 1997 16:55:38 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA02452; Tue, 3 Jun 1997 16:55:32 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id QAA03856; Tue, 3 Jun 1997 16:54:43 -0700 (PDT) Date: Tue, 3 Jun 1997 16:54:43 -0700 (PDT) Message-Id: <199706032354.QAA03856@freefall.freebsd.org> To: Nakai@Mlab.t.u-tokyo.ac.jp, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3716 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port: enlightenment (x11) State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 16:54:19 PDT 1997 State-Changed-Why: Thanks, added some "@dirrm"s and imported! From owner-freebsd-ports Tue Jun 3 17:18:21 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA03726 for ports-outgoing; Tue, 3 Jun 1997 17:18:21 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA03719 for ; Tue, 3 Jun 1997 17:18:19 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id RAA03524; Tue, 3 Jun 1997 17:18:06 -0700 (PDT) Date: Tue, 3 Jun 1997 17:18:06 -0700 (PDT) Message-Id: <199706040018.RAA03524@silvia.HIP.Berkeley.EDU> To: bde@zeta.org.au CC: dmaddox@scsn.net, ports@FreeBSD.ORG In-reply-to: <199706032323.JAA02401@godzilla.zeta.org.au> (message from Bruce Evans on Wed, 4 Jun 1997 09:23:39 +1000) Subject: Re: Ports 'make install' and mtree From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * This is caused by: * - /usr/local is owned by bin:bin according to /etc/mtree/BSD.usr.dist * - "." is owned by root:wheel according to /etc/mtree/BSD.local.dist * - `make hierarchy' goes through the mtree files in a strange (alphabetical) * order, so BSD.local.dist is done before BSD.usr.dist. I didn't know that `make hierarchy' uses BSD.local.dist.... * It's reasonable for mount points to have different permissions than the * root directory of mounted file systems, but the difference is probably * backwards here. Which way should I fix it? (I was about to ask you, Bruce. :) * `make install' runs mtree on /etc/mtree/BSD.local.dist and doesn't run * it on BSD.usr.dist. This is by design. Unless you can run it on BSD.usr.dist but only for the "local" directory, I don't think we would want to add that. * This is better than pkg_add, which runs mtree on stale copies of * BSD.local.dist in packages, so that you can't fix this problem or * others in your local copy of BSD.local.dist. This is again, by design. The problem is meant to be fixed at the package-creation machine, not in individual users' machines. Satoshi From owner-freebsd-ports Tue Jun 3 17:35:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA04577 for ports-outgoing; Tue, 3 Jun 1997 17:35:14 -0700 (PDT) Received: from iago.ienet.com (iago.ienet.com [207.78.32.53]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA04572 for ; Tue, 3 Jun 1997 17:35:12 -0700 (PDT) Received: from iago.ienet.com (localhost.ienet.com [127.0.0.1]) by iago.ienet.com (8.8.5/8.8.5) with ESMTP id RAA01736 Tue, 3 Jun 1997 17:35:07 -0700 (PDT) Message-Id: <199706040035.RAA01736@iago.ienet.com> To: freebsd-ports@freebsd.org From: pius@ienet.com Subject: perl5.004 port doesn't install suidperl on FreeBSD 2.1.7? Date: Tue, 03 Jun 1997 17:35:07 -0700 Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Is there any reason why the perl5 port shouldn't install suidperl on FreeBSD 2.1 systems anymore (as of the 5.004 port)? It used to be installed on previous versions of the port. Here's a patch to ports/lang/perl5/patches/patch-ac that'll cause suidperl to be installed on 2.1 systems as well: --- patch-ac.orig Sat May 31 22:33:59 1997 +++ patch-ac Tue Jun 3 14:51:49 1997 @@ -1,6 +1,14 @@ ---- hints/freebsd.sh.orig Thu Apr 24 01:01:37 1997 -+++ hints/freebsd.sh Fri May 23 21:06:35 1997 -@@ -76,12 +76,18 @@ +--- hints/freebsd.sh.orig Wed Apr 23 16:01:37 1997 ++++ hints/freebsd.sh Tue Jun 3 14:29:50 1997 +@@ -63,6 +63,7 @@ + d_setreuid='define' + d_setegid='undef' + d_seteuid='undef' ++ d_dosuid='define' + test -r ./broken-db.msg && . ./broken-db.msg + ;; + # +@@ -76,12 +77,18 @@ d_setreuid='define' d_setegid='undef' d_seteuid='undef' This is a patch for a patch - so it may be hard to read. Basically, the only difference is that d_dosuid='define' is added for the 2.1 case. This was maybe forgotten when the port was recently updated. Regards, Pius From owner-freebsd-ports Tue Jun 3 18:22:57 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA07356 for ports-outgoing; Tue, 3 Jun 1997 18:22:57 -0700 (PDT) Received: from godzilla.zeta.org.au (godzilla.zeta.org.au [203.2.228.19]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA07347 for ; Tue, 3 Jun 1997 18:22:50 -0700 (PDT) Received: (from bde@localhost) by godzilla.zeta.org.au (8.8.5/8.6.9) id LAA07039; Wed, 4 Jun 1997 11:19:03 +1000 Date: Wed, 4 Jun 1997 11:19:03 +1000 From: Bruce Evans Message-Id: <199706040119.LAA07039@godzilla.zeta.org.au> To: asami@cs.berkeley.edu, bde@zeta.org.au Subject: Re: Ports 'make install' and mtree Cc: dmaddox@scsn.net, ports@FreeBSD.ORG Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > * This is caused by: > * - /usr/local is owned by bin:bin according to /etc/mtree/BSD.usr.dist > * - "." is owned by root:wheel according to /etc/mtree/BSD.local.dist > * - `make hierarchy' goes through the mtree files in a strange (alphabetical) > * order, so BSD.local.dist is done before BSD.usr.dist. > >I didn't know that `make hierarchy' uses BSD.local.dist.... You were right, it doesn't by default :-). It only uses it if MAKE_LOCAL is defined, and it does it last in that case. I was looking at `make distribution'. Anyway, `make hierarchy' sets the ownership of /usr/local to bin:bin. > * It's reasonable for mount points to have different permissions than the > * root directory of mounted file systems, but the difference is probably > * backwards here. > >Which way should I fix it? (I was about to ask you, Bruce. :) Make all mount points and root directories owned by root:wheel. > * `make install' runs mtree on /etc/mtree/BSD.local.dist and doesn't run > * it on BSD.usr.dist. > >This is by design. Unless you can run it on BSD.usr.dist but only >for the "local" directory, I don't think we would want to add that. This is just correct. `make install' shouldn't touch anywhere outside of /usr/local. > * This is better than pkg_add, which runs mtree on stale copies of > * BSD.local.dist in packages, so that you can't fix this problem or > * others in your local copy of BSD.local.dist. > >This is again, by design. The problem is meant to be fixed at the >package-creation machine, not in individual users' machines. This is just broken. Installing packages shouldn't touch anything not directly used by the packages. Bruce From owner-freebsd-ports Tue Jun 3 18:36:50 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA08416 for ports-outgoing; Tue, 3 Jun 1997 18:36:50 -0700 (PDT) Received: from cabri.obs-besancon.fr (cabri.obs-besancon.fr [193.52.184.3]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id SAA08411 for ; Tue, 3 Jun 1997 18:36:47 -0700 (PDT) Received: by cabri.obs-besancon.fr (5.57/Ultrix3.0-C) id AA14401; Wed, 4 Jun 97 03:37:12 +0100 Date: Wed, 4 Jun 97 03:37:12 +0100 Message-Id: <9706040237.AA14401@cabri.obs-besancon.fr> From: Jean-Marc Zucconi To: fenner@parc.xerox.com Cc: asami@cs.berkeley.edu, freebsd-ports@freebsd.org In-Reply-To: <97Jun3.165013pdt.177489@crevenia.parc.xerox.com> (message from Bill Fenner on Tue, 3 Jun 1997 16:50:08 PDT) Subject: Re: ispell port requires EMACS?! X-Mailer: Emacs Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk >>>>> Bill Fenner writes: > asami@cs.berkeley.edu (Satoshi Asami) wrote: >> I believe it needs it to byte-compile an .elc file. Try "make >> package" and see if everything really worked ok. > Sounds like this is one of the places where the package-building > dependencies are different than the building-to-use-on-this-system > dependenices. If you're making the package, then you want to > byte-compile the .elc file for Emacs users that want to use the > package, but if you don't use Emacs then you have no use for a > byte-compiled .elc file anyway. I think the solution is to not byte-compile ispell.el. Emacs users will probably not notice that it take a little more time to load this one :-) Jean-Marc _____________________________________________________________________________ Jean-Marc Zucconi Observatoire de Besancon F 25010 Besancon cedex PGP Key: finger jmz@cabri.obs-besancon.fr ============================================================================= From owner-freebsd-ports Tue Jun 3 18:42:13 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA08935 for ports-outgoing; Tue, 3 Jun 1997 18:42:13 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA08915; Tue, 3 Jun 1997 18:41:55 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id SAA04642; Tue, 3 Jun 1997 18:41:04 -0700 (PDT) Date: Tue, 3 Jun 1997 18:41:04 -0700 (PDT) Message-Id: <199706040141.SAA04642@freefall.freebsd.org> To: pgiffuni@FPS.biblos.unal.edu.co, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3686 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port: Xbl State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 18:39:53 PDT 1997 State-Changed-Why: Thanks, imported. Here are the changes: === diff -ruN xbl/Makefile xbl.new/Makefile --- xbl/Makefile Sun May 25 08:42:15 1997 +++ xbl.new/Makefile Tue Jun 3 18:10:26 1997 @@ -1,14 +1,13 @@ # New ports collection makefile for: xbl # Version required: 1.0h -# Date created: ? +# Date created: May 25 1997 # Whom: pgs (original) # -# $Id: Makefile,v 1.7 1997/04/09 07:09:38 pedro Exp $ +# $Id$ # DISTNAME= xbl-1.0h -PKGNAME= xbl-1.0h -CATEGORIES+= net +CATEGORIES= games MASTER_SITES= ftp://ftp710.univ-lyon1.fr/pub/xbl/ EXTRACT_SUFX= .tar.Z @@ -16,8 +15,6 @@ USE_X11= yes HAS_CONFIGURE= yes -#IS_INTERACTIVE= yes - -MAN1= xbl.1 +MANN= xbl.n .include diff -ruN xbl/patches/patch-aa xbl.new/patches/patch-aa --- xbl/patches/patch-aa Tue Apr 29 16:13:35 1997 +++ xbl.new/patches/patch-aa Tue Jun 3 18:07:25 1997 @@ -1,57 +1,67 @@ -*** Makefile.in.orig Tue Apr 29 18:10:08 1997 ---- Makefile.in Tue Apr 29 18:12:29 1997 -*************** -*** 29,54 **** - # Directory who contain X Resource Database - # The default value if overrided by configure if xmkmf or imake exists. - # -! RESOURCEDIR=/usr/lib/X11/app-defaults - @XAPPLOADDIR@ - - # Directory where install binary - # The default value if overrided by configure if xmkmf or imake exists. - # -! BINDIR=/usr/local/bin - @BINDIR@ - - # Directory who contain score - # Put your HOME if you have a private use of the game - # The default value if overrided by configure if xmkmf or imake exists. - # -! SCOREDIR=/usr/local/lib/xbl - @SCOREDIR@ - - # Directory where put man pages. - # The default value if overrided by configure if xmkmf or imake exists. - # -! MANPATH=/usr/local/man - @MANPATH@ - - ########################################################################### ---- 29,54 ---- - # Directory who contain X Resource Database - # The default value if overrided by configure if xmkmf or imake exists. - # -! RESOURCEDIR=$(X11_BASE)/lib/X11/app-defaults - @XAPPLOADDIR@ - - # Directory where install binary - # The default value if overrided by configure if xmkmf or imake exists. - # -! BINDIR=$(PREFIX)/bin - @BINDIR@ - - # Directory who contain score - # Put your HOME if you have a private use of the game - # The default value if overrided by configure if xmkmf or imake exists. - # -! SCOREDIR=$(PREFIX)/lib/xbl - @SCOREDIR@ - - # Directory where put man pages. - # The default value if overrided by configure if xmkmf or imake exists. - # -! MANPATH=$(PREFIX)/man - @MANPATH@ - - ########################################################################### +--- ./Makefile.in.org Sun Jan 12 11:03:54 1997 ++++ ./Makefile.in Tue Jun 3 18:07:01 1997 +@@ -14,7 +14,7 @@ + USE_SETGID=-DUSE_SETGID + + # group owner of games file +-GROUP_GID=2 ++GROUP_GID=13 + + ########################################################################### + # You don't need to read below if you have xmkmf or imake +@@ -29,26 +29,26 @@ + # Directory who contain X Resource Database + # The default value if overrided by configure if xmkmf or imake exists. + # +-RESOURCEDIR=/usr/lib/X11/app-defaults ++RESOURCEDIR=$(X11_BASE)/lib/X11/app-defaults + @XAPPLOADDIR@ + + # Directory where install binary + # The default value if overrided by configure if xmkmf or imake exists. + # +-BINDIR=/usr/local/bin ++BINDIR=$(PREFIX)/bin + @BINDIR@ + + # Directory who contain score + # Put your HOME if you have a private use of the game + # The default value if overrided by configure if xmkmf or imake exists. + # +-SCOREDIR=/usr/local/lib/xbl ++SCOREDIR=$(PREFIX)/lib/xbl + @SCOREDIR@ + + # Directory where put man pages. + # The default value if overrided by configure if xmkmf or imake exists. + # +-MANPATH=/usr/local/man ++MANPATH=$(PREFIX)/man + @MANPATH@ + + ########################################################################### +@@ -127,20 +127,15 @@ + @-if [ "" != "$(USE_SETGID)" ] ; then \ + echo "You use GID=$(GROUP_GID) protection" ; \ + fi +- @echo "Type to continue installation" +- @echo "Type NO to stop installation" +- @read LINE && test "" = "$$LINE" ++# @echo "Type to continue installation" ++# @echo "Type NO to stop installation" ++# @read LINE && test "" = "$$LINE" + # + # Remove old score file + # + @-if [ -d "$(SCOREDIR)" ] ; \ + then \ +- echo "The scoring method and speeds of Xbl had change" ; \ +- echo "If your version is older than 0.2e, destroy score." ; \ +- echo "Type to destroy old score files" ; \ +- echo "Type NO to hold old score files" ; \ +- read LINE && test "" = "$$LINE" && rm $(SCOREDIR)/[1-9]* ; \ +- exit 0 ; \ ++ rm $(SCOREDIR)/[1-9]* ; \ + fi + # + # Install executable diff -ruN xbl/patches/patch-ac xbl.new/patches/patch-ac --- xbl/patches/patch-ac Sun May 18 21:56:40 1997 +++ xbl.new/patches/patch-ac Wed Dec 31 16:00:00 1969 @@ -1,23 +0,0 @@ -*** Makefile.in.orig Sun May 18 23:38:38 1997 ---- Makefile.in Sun May 18 23:49:04 1997 -*************** -*** 127,135 **** - @-if [ "" != "$(USE_SETGID)" ] ; then \ - echo "You use GID=$(GROUP_GID) protection" ; \ - fi -! @echo "Type to continue installation" -! @echo "Type NO to stop installation" -! @read LINE && test "" = "$$LINE" - # - # Remove old score file - # ---- 127,135 ---- - @-if [ "" != "$(USE_SETGID)" ] ; then \ - echo "You use GID=$(GROUP_GID) protection" ; \ - fi -! # @echo "Type to continue installation" -! # @echo "Type NO to stop installation" -! # @read LINE && test "" = "$$LINE" - # - # Remove old score file - # diff -ruN xbl/pkg/PLIST xbl.new/pkg/PLIST --- xbl/pkg/PLIST Sun May 25 08:39:11 1997 +++ xbl.new/pkg/PLIST Tue Jun 3 18:11:57 1997 @@ -1,5 +1,5 @@ bin/xbl -lib/X11/app-defaults/Xbl/Xbl.ad +lib/X11/app-defaults/Xbl lib/X11/xbl/COPYING lib/X11/xbl/Xbl lib/X11/xbl/xbl-game.gif @@ -8,4 +8,4 @@ lib/X11/xbl/xbl-score.gif lib/X11/xbl/xbl-zoo.gif lib/X11/xbl/xbl.html -man/man1/xbl.1.gz +man/mann/xbl.n.gz === Please test "make reinstall" with or without pkg_delete first in the future. (And of course, "make package".) From owner-freebsd-ports Tue Jun 3 18:43:45 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA09029 for ports-outgoing; Tue, 3 Jun 1997 18:43:45 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA09022 for ; Tue, 3 Jun 1997 18:43:42 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id SAA04149; Tue, 3 Jun 1997 18:43:11 -0700 (PDT) Date: Tue, 3 Jun 1997 18:43:11 -0700 (PDT) Message-Id: <199706040143.SAA04149@silvia.HIP.Berkeley.EDU> To: jmz@cabri.obs-besancon.fr CC: fenner@parc.xerox.com, freebsd-ports@freebsd.org In-reply-to: <9706040237.AA14401@cabri.obs-besancon.fr> (message from Jean-Marc Zucconi on Wed, 4 Jun 97 03:37:12 +0100) Subject: Re: ispell port requires EMACS?! From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * I think the solution is to not byte-compile ispell.el. Emacs users * will probably not notice that it take a little more time to load this * one :-) That sounds about right. Jean-Marc, you care to do the honors? :) Satoshi From owner-freebsd-ports Tue Jun 3 18:57:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA09799 for ports-outgoing; Tue, 3 Jun 1997 18:57:41 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA09792 for ; Tue, 3 Jun 1997 18:57:35 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id SAA04186; Tue, 3 Jun 1997 18:57:27 -0700 (PDT) Date: Tue, 3 Jun 1997 18:57:27 -0700 (PDT) Message-Id: <199706040157.SAA04186@silvia.HIP.Berkeley.EDU> To: dmaddox@scsn.net CC: bde@zeta.org.au, ports@FreeBSD.ORG In-reply-to: <19970603194623.59411@scsn.net> (root@scsn.net) Subject: Re: Ports 'make install' and mtree From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * Blech. Yet another good reason not to use packages. I never use packages anyway, * since I run -current, and -current has a tendency to break 'em and require a * recompile anyway :-) I'm so glad to hear that my effort to constantly rebuild packages is appreciated. (Maybe you can report what is broken so we can investigate/fix it, rather than make snide remarks like this? :<) Satoshi From owner-freebsd-ports Tue Jun 3 19:03:50 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA10094 for ports-outgoing; Tue, 3 Jun 1997 19:03:50 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA10089 for ; Tue, 3 Jun 1997 19:03:45 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id TAA04225; Tue, 3 Jun 1997 19:03:37 -0700 (PDT) Date: Tue, 3 Jun 1997 19:03:37 -0700 (PDT) Message-Id: <199706040203.TAA04225@silvia.HIP.Berkeley.EDU> To: bde@zeta.org.au CC: bde@zeta.org.au, ports@freebsd.org In-reply-to: <199706040119.LAA07039@godzilla.zeta.org.au> (message from Bruce Evans on Wed, 4 Jun 1997 11:19:03 +1000) Subject: Re: Ports 'make install' and mtree From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * You were right, it doesn't by default :-). It only uses it if MAKE_LOCAL * is defined, and it does it last in that case. I was looking at `make * distribution'. Anyway, `make hierarchy' sets the ownership of /usr/local * to bin:bin. I thought MAKE_LOCAL has been deprecated (1.126 of src/Makefile). Jordan, do you mind if I remove it from src/etc/Makefile too? * Make all mount points and root directories owned by root:wheel. What does that translate into in mtree-speak? ;) I don't think there is any guarantee that /usr/local is a mount point. * This is just broken. Installing packages shouldn't touch anything not * directly used by the packages. But this is the only way we can set the permissions of subdirectories correctly. If someone has a better idea, I'm all ears. :) Satoshi From owner-freebsd-ports Tue Jun 3 19:06:34 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA10293 for ports-outgoing; Tue, 3 Jun 1997 19:06:34 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA10257; Tue, 3 Jun 1997 19:06:10 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id TAA04763; Tue, 3 Jun 1997 19:05:19 -0700 (PDT) Date: Tue, 3 Jun 1997 19:05:19 -0700 (PDT) Message-Id: <199706040205.TAA04763@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, markm@FreeBSD.ORG Subject: Re: ports/3322 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: setlocale problem in lang/perl5 Responsible-Changed-From-To: freebsd-ports->markm Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 19:05:04 PDT 1997 Responsible-Changed-Why: He's the maintainer. From owner-freebsd-ports Tue Jun 3 19:10:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA10520 for ports-outgoing; Tue, 3 Jun 1997 19:10:05 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA10481; Tue, 3 Jun 1997 19:10:01 -0700 (PDT) Date: Tue, 3 Jun 1997 19:10:01 -0700 (PDT) Message-Id: <199706040210.TAA10481@hub.freebsd.org> To: freebsd-ports Cc: From: Satoshi Asami Subject: Re: ports/3357: I make "pari-GP" ports Reply-To: Satoshi Asami Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3357; it has been noted by GNATS. From: Satoshi Asami To: freebsd-gnats-submit@freebsd.org, yoshiaki@kt.rim.or.jp Cc: Subject: Re: ports/3357: I make "pari-GP" ports Date: Tue, 03 Jun 1997 19:09:12 -0700 Why is this port have NO_PACKAGE set? From owner-freebsd-ports Tue Jun 3 19:10:46 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA10557 for ports-outgoing; Tue, 3 Jun 1997 19:10:46 -0700 (PDT) Received: from mail.scsn.net (scsn.net [206.25.246.12]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA10552 for ; Tue, 3 Jun 1997 19:10:44 -0700 (PDT) Received: from cola59.scsn.net ([206.25.247.59]) by mail.scsn.net (Post.Office MTA v3.1 release PO203a ID# 0-32322U5000L100S10000) with ESMTP id AAA220; Tue, 3 Jun 1997 22:02:49 -0400 Received: (from root@localhost) by cola59.scsn.net (8.8.5/8.8.5) id WAA00975; Tue, 3 Jun 1997 22:09:38 -0400 (EDT) Message-ID: <19970603220937.02810@scsn.net> Date: Tue, 3 Jun 1997 22:09:37 -0400 From: "Donald J. Maddox" To: Satoshi Asami Cc: dmaddox@scsn.net, bde@zeta.org.au, ports@FreeBSD.ORG Subject: Re: Ports 'make install' and mtree Reply-To: dmaddox@scsn.net References: <19970603194623.59411@scsn.net> <199706040157.SAA04186@silvia.HIP.Berkeley.EDU> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 In-Reply-To: <199706040157.SAA04186@silvia.HIP.Berkeley.EDU>; from Satoshi Asami on Tue, Jun 03, 1997 at 06:57:27PM -0700 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, Jun 03, 1997 at 06:57:27PM -0700, Satoshi Asami wrote: > * Blech. Yet another good reason not to use packages. I never use packages anyway, > * since I run -current, and -current has a tendency to break 'em and require a > * recompile anyway :-) > > I'm so glad to hear that my effort to constantly rebuild packages is > appreciated. (Maybe you can report what is broken so we can > investigate/fix it, rather than make snide remarks like this? :<) > > Satoshi Sorry, I wasn't trying to deride the efforts you make in keeping working packages available... It's simply a fact that changes in -current often break installed packages, and I prefer just recompiling source I already have in distfiles over downloading Yet Another Package That May Be Broken Again Tomorrow. No matter how diligent you are in rebuilding the available packages, you cannot respond to the breakage of a package I use faster than I can :-) I apologize if my previous message sounded like an indictment of the package system that exists; it wasn't. It was simply a statement that IMVHO, packages are more trouble than they are worth for -current users. FWIW, I think you do a great job. Thanks. From owner-freebsd-ports Tue Jun 3 19:17:20 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA11012 for ports-outgoing; Tue, 3 Jun 1997 19:17:20 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA10997; Tue, 3 Jun 1997 19:17:13 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id TAA04973; Tue, 3 Jun 1997 19:16:22 -0700 (PDT) Date: Tue, 3 Jun 1997 19:16:22 -0700 (PDT) Message-Id: <199706040216.TAA04973@freefall.freebsd.org> To: kiri@kiri.toba-cmt.ac.jp, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3296 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port(jp-GP-2.01jp):japanese/GP. State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 19:14:33 PDT 1997 State-Changed-Why: Thanks, imported. Here are the changes: === diff -ru GP/Makefile gp/Makefile --- GP/Makefile Tue Apr 15 05:45:07 1997 +++ gp/Makefile Tue Jun 3 19:11:44 1997 @@ -7,17 +7,17 @@ # DISTNAME= GP-2.01jp -PKGNAME= jp-GP-2.01jp -CATEGORIES+= printing japanese +PKGNAME= jp-gp-2.01 +CATEGORIES= japanese print MASTER_SITES= http://www.kamome.or.jp/hueda/GP/ \ ftp://green.arailab.dnj.ynu.ac.jp/pub/AraiLab/GP/ MAINTAINER= kiri@kiri.toba-cmt.ac.jp -RUN_DEPENDS= ${PREFIX}/bin/wish4.2jp:${PORTSDIR}/japanese/tk42 \ - ${PREFIX}/bin/nup:${PORTSDIR}/japanese/dvi2ps \ - ${PREFIX}/bin/a2ps-j:${PORTSDIR}/japanese/a2ps \ - ${X11BASE}/bin/ghostview:${PORTSDIR}/print/ghostview +RUN_DEPENDS= wish4.2jp:${PORTSDIR}/japanese/tk42 \ + nup:${PORTSDIR}/japanese/dvi2ps \ + a2ps-j:${PORTSDIR}/japanese/a2ps \ + ghostview:${PORTSDIR}/print/ghostview NO_BUILD= yes @@ -27,8 +27,8 @@ @${MKDIR} ${PATCHDIR} @${SETENV} FILESDIR=${FILESDIR} PATCHDIR=${PATCHDIR} \ PREFIX=${PREFIX} SED=${SED} X11BASE=${X11BASE} \ - ${FILESDIR}/pr-setup.sh - + /bin/sh ${FILESDIR}/pr-setup.sh + do-install: @${MKDIR} ${PREFIX}/etc/GP-jp @${INSTALL_SCRIPT} ${WRKSRC}/GP ${PREFIX}/bin/GP-j @@ -46,4 +46,3 @@ @${RM} -f ${FILESDIR}/filetype ${FILESDIR}/printer ${PATCHDIR}/patch-aa .include - diff -ru GP/pkg/COMMENT gp/pkg/COMMENT --- GP/pkg/COMMENT Sun Mar 30 03:35:38 1997 +++ gp/pkg/COMMENT Tue Jun 3 18:47:20 1997 @@ -1 +1 @@ -GP is a GUI Printer manager written with Tcl/Tk. \ No newline at end of file +A GUI Printer manager written with Tcl/Tk. diff -ru GP/pkg/PLIST gp/pkg/PLIST --- GP/pkg/PLIST Sat Apr 5 17:25:46 1997 +++ gp/pkg/PLIST Tue Jun 3 18:47:36 1997 @@ -4,4 +4,4 @@ share/doc/GP-jp/README share/doc/GP-jp/Variables @dirrm etc/GP-jp -@dirrm share/doc/GP-jp \ No newline at end of file +@dirrm share/doc/GP-jp === You may wont to set "require-final-newline" in your emacs. Satoshi From owner-freebsd-ports Tue Jun 3 19:21:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA11409 for ports-outgoing; Tue, 3 Jun 1997 19:21:06 -0700 (PDT) Received: from godzilla.zeta.org.au (godzilla.zeta.org.au [203.2.228.19]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA11402 for ; Tue, 3 Jun 1997 19:21:03 -0700 (PDT) Received: (from bde@localhost) by godzilla.zeta.org.au (8.8.5/8.6.9) id MAA09412; Wed, 4 Jun 1997 12:19:36 +1000 Date: Wed, 4 Jun 1997 12:19:36 +1000 From: Bruce Evans Message-Id: <199706040219.MAA09412@godzilla.zeta.org.au> To: asami@cs.berkeley.edu, bde@zeta.org.au Subject: Re: Ports 'make install' and mtree Cc: ports@freebsd.org Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > * Make all mount points and root directories owned by root:wheel. > >What does that translate into in mtree-speak? ;) I don't think there >is any guarantee that /usr/local is a mount point. It probably should be. Treat it like one anyway. Bruce From owner-freebsd-ports Tue Jun 3 19:26:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA11784 for ports-outgoing; Tue, 3 Jun 1997 19:26:30 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA11774; Tue, 3 Jun 1997 19:26:24 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id TAA05113; Tue, 3 Jun 1997 19:25:34 -0700 (PDT) Date: Tue, 3 Jun 1997 19:25:34 -0700 (PDT) Message-Id: <199706040225.TAA05113@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, andreas@FreeBSD.ORG Subject: Re: ports/3358 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: XFMail-1.1 has been released Responsible-Changed-From-To: freebsd-ports->andreas Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 19:24:59 PDT 1997 Responsible-Changed-Why: Andreas, you changed the xforms port and the patches no longer apply. (I'm not complaining. :) Can you take a look at this PR too? From owner-freebsd-ports Tue Jun 3 19:31:02 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA12079 for ports-outgoing; Tue, 3 Jun 1997 19:31:02 -0700 (PDT) Received: from alpha.xerox.com (alpha.Xerox.COM [13.1.64.93]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id TAA12073 for ; Tue, 3 Jun 1997 19:31:01 -0700 (PDT) Received: from crevenia.parc.xerox.com ([13.2.116.11]) by alpha.xerox.com with SMTP id <17084(4)>; Tue, 3 Jun 1997 19:30:30 PDT Received: from localhost by crevenia.parc.xerox.com with SMTP id <177489>; Tue, 3 Jun 1997 19:30:22 -0700 To: freebsd-ports@freebsd.org Subject: Re: ispell port requires EMACS?! In-reply-to: Your message of "Tue, 03 Jun 97 19:37:12 PDT." <9706040237.AA14401@cabri.obs-besancon.fr> Date: Tue, 3 Jun 1997 19:30:11 PDT From: Bill Fenner Message-Id: <97Jun3.193022pdt.177489@crevenia.parc.xerox.com> Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Jean-Marc Zucconi wrote: >I think the solution is to not byte-compile ispell.el. Emacs users >will probably not notice that it take a little more time to load this >one :-) You could byte-compile it if emacs is already present, or if PACKAGE_BUILDING. That might be too much effort for too little return. Bill From owner-freebsd-ports Tue Jun 3 19:36:17 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA12633 for ports-outgoing; Tue, 3 Jun 1997 19:36:17 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA12530; Tue, 3 Jun 1997 19:35:57 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id TAA05317; Tue, 3 Jun 1997 19:35:06 -0700 (PDT) Date: Tue, 3 Jun 1997 19:35:06 -0700 (PDT) Message-Id: <199706040235.TAA05317@freefall.freebsd.org> To: mph@pobox.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3362 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Ports submission: XFrisk 0.99b4 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 19:33:59 PDT 1997 State-Changed-Why: Thanks, imported. My changes: === diff -ru xfrisk/Makefile xfrisk.new/Makefile --- xfrisk/Makefile Sun Apr 20 15:18:39 1997 +++ xfrisk.new/Makefile Tue Jun 3 19:29:19 1997 @@ -12,7 +12,9 @@ MASTER_SITES= $(MASTER_SITE_XCONTRIB) MASTER_SITE_SUBDIR= games/multiplayer/ -MAINTAINER= Matthew Hunt +MAINTAINER= mph@pobox.com + +NO_CDROM= Possible trademark infringement USE_IMAKE= yes NO_INSTALL_MANPAGES= yes === There is no "rule" for MAINTAINER but I am afraid it might break some script somewhere. ;) From owner-freebsd-ports Tue Jun 3 19:39:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA12787 for ports-outgoing; Tue, 3 Jun 1997 19:39:14 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA12759; Tue, 3 Jun 1997 19:38:48 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id TAA05396; Tue, 3 Jun 1997 19:37:57 -0700 (PDT) Date: Tue, 3 Jun 1997 19:37:57 -0700 (PDT) Message-Id: <199706040237.TAA05396@freefall.freebsd.org> To: vanilla@Minje.Com.TW, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3656 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: midnight command devel version ports State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 19:37:26 PDT 1997 State-Changed-Why: Superseded by 3658. From owner-freebsd-ports Tue Jun 3 19:40:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA12906 for ports-outgoing; Tue, 3 Jun 1997 19:40:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA12871; Tue, 3 Jun 1997 19:40:02 -0700 (PDT) Resent-Date: Tue, 3 Jun 1997 19:40:02 -0700 (PDT) Resent-Message-Id: <199706040240.TAA12871@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, Nakai@Mlab.t.u-tokyo.ac.jp Received: (from nobody@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA12811; Tue, 3 Jun 1997 19:39:24 -0700 (PDT) Message-Id: <199706040239.TAA12811@hub.freebsd.org> Date: Tue, 3 Jun 1997 19:39:24 -0700 (PDT) From: Nakai@Mlab.t.u-tokyo.ac.jp To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: ports/3772: Fixed port: giftool-1.0 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3772 >Category: ports >Synopsis: Fixed port: giftool-1.0 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue Jun 3 19:40:01 PDT 1997 >Last-Modified: >Originator: Yukihiro Nakai >Organization: >Release: 3.0-current >Environment: >Description: I have updated giftool port to follow the latest version. Please enjoy.... Add file: files/patch-aa files/patch-ab --------------- diff -ruN giftool.orig/Makefile giftool/Makefile --- giftool.orig/Makefile Wed Jun 4 11:25:16 1997 +++ giftool/Makefile Mon Mar 10 11:50:36 1997 @@ -1,15 +1,14 @@ # New ports collection makefile for: giftool -# Version required: 0.9 -# Date created: 14 October 1996 +# Version required: 1.0 +# Date created: 7 March 1997 # Whom: Yukihiro Nakai # # $Id: Makefile,v 1.3 1996/12/07 09:28:43 max Exp $ # -DISTNAME= giftool -PKGNAME= giftool-0.9 +DISTNAME= giftool-1.0 CATEGORIES= graphics -MASTER_SITES= ftp://ftp.huie.hokudai.ac.jp/pub/tool/graphics/ +MASTER_SITES= ftp://ftp.sbs.de/pub/www/tools/giftool/ MAINTAINER= Nakai@Mlab.t.u-tokyo.ac.jp @@ -18,6 +17,19 @@ NO_WRKSUBDIR= yes ALL_TARGET= giftool +pre-clean: + @ rm -f ${PATCHDIR}/* + +pre-patch: +.if defined(RETVALUE) + @ echo "Return value patch enabled....." + @ cp ${FILESDIR}/patch-aa ${PATCHDIR} +.endif +.if defined(MALLOCSIZE) + @ echo "Malloc size improve parch enabled....." + @ cp ${FILESDIR}/patch-ab ${PATCHDIR} +.endif + do-install: @ ${INSTALL_PROGRAM} ${WRKSRC}/giftool ${PREFIX}/bin @ ${MKDIR} -p ${PREFIX}/share/doc/giftool @@ -28,7 +40,7 @@ post-install: .if !defined(BATCH) - @ more -e ${FILESDIR}/post-install-notes + @ /usr/bin/more -e ${FILESDIR}/post-install-notes .endif .include diff -ruN giftool.orig/files/md5 giftool/files/md5 --- giftool.orig/files/md5 Wed Jun 4 11:25:16 1997 +++ giftool/files/md5 Mon Mar 10 11:51:49 1997 @@ -1 +1 @@ -MD5 (giftool.tar.gz) = e62e1c16930ccdd64ccebc62005aacf3 +MD5 (giftool-1.0.tar.gz) = 3d90069d230b5d42a5e1803cfcb9d6ed diff -ruN giftool.orig/files/patch-aa giftool/files/patch-aa --- giftool.orig/files/patch-aa Thu Jan 1 09:00:00 1970 +++ giftool/files/patch-aa Sat Mar 8 15:38:02 1997 @@ -0,0 +1,27 @@ +*** main.c.orig Sat Mar 8 06:34:28 1997 +--- main.c Sat Mar 8 06:37:33 1997 +*************** +*** 1275,1281 **** + exit(1); + } + +! main(int argc, char *argv[]) + { + int c, i; + int batchMode = 0; +--- 1275,1281 ---- + exit(1); + } + +! int main(int argc, char *argv[]) + { + int c, i; + int batchMode = 0; +*************** +*** 1410,1413 **** +--- 1410,1414 ---- + GIFFree(stream); + } + } ++ return 0; + } diff -ruN giftool.orig/files/patch-ab giftool/files/patch-ab --- giftool.orig/files/patch-ab Thu Jan 1 09:00:00 1970 +++ giftool/files/patch-ab Sat Mar 8 15:30:31 1997 @@ -0,0 +1,19 @@ +*** readGIF.c.orig Sat Mar 8 06:28:02 1997 +--- readGIF.c Sat Mar 8 06:30:05 1997 +*************** +*** 253,259 **** + cur->data.image.cmapSize = 0; + + } +! cur->data.image.data = (unsigned char *)malloc(cur->width * cur->height); + cur->data.image.interlaced = BitSet(buf[8], INTERLACE); + readImage(fd, BitSet(buf[8], INTERLACE), + cur->width, cur->height, cur->data.image.data); +--- 253,259 ---- + cur->data.image.cmapSize = 0; + + } +! cur->data.image.data = (unsigned char *)malloc(cur->width * cur->height + 1); + cur->data.image.interlaced = BitSet(buf[8], INTERLACE); + readImage(fd, BitSet(buf[8], INTERLACE), + cur->width, cur->height, cur->data.image.data); diff -ruN giftool.orig/pkg/DESCR giftool/pkg/DESCR --- giftool.orig/pkg/DESCR Wed Jun 4 11:25:17 1997 +++ giftool/pkg/DESCR Sat Mar 8 15:50:17 1997 @@ -19,3 +19,24 @@ giftool version 1.0 is Copyright 1994 Home Pages, Inc and is shareware. Please, use the -info option to read the licensing information. + +PORT BUILD OPTION +================= + +There are two useful options are suggested and available for this port of +giftool. You can specify it following "make clean". + +make RETVALUE=yes +----------- +Giftool does not return value from main(), so it is impossible to use this +tools in programs like make(1) or pipes. +This option is suggested by Sergei Chechetkin . + +make MALLOCSIZE=yes +--------------- +Giftool 1.0 or some earlier version cause segmentation fault about some +images. Something about pre-read seems to be bad, so make malloc size +bigger to improve that. +This option is suggested by Hidetoshi Shimokawa . + +You can specify all options such as 'make RETVALUE=yes MALLOCSIZE=yes'. diff -ruN giftool.orig/pkg/PLIST giftool/pkg/PLIST --- giftool.orig/pkg/PLIST Wed Jun 4 11:25:17 1997 +++ giftool/pkg/PLIST Sat Mar 8 14:41:43 1997 @@ -2,4 +2,3 @@ share/doc/giftool/COPYRIGHT share/doc/giftool/README share/doc/giftool/post-install-notes -@dirrm share/doc/giftool >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Tue Jun 3 20:00:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA14231 for ports-outgoing; Tue, 3 Jun 1997 20:00:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA14197; Tue, 3 Jun 1997 20:00:01 -0700 (PDT) Resent-Date: Tue, 3 Jun 1997 20:00:01 -0700 (PDT) Resent-Message-Id: <199706040300.UAA14197@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, Nakai@Mlab.t.u-tokyo.ac.jp Received: (from nobody@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA13836; Tue, 3 Jun 1997 19:54:28 -0700 (PDT) Message-Id: <199706040254.TAA13836@hub.freebsd.org> Date: Tue, 3 Jun 1997 19:54:28 -0700 (PDT) From: Nakai@Mlab.t.u-tokyo.ac.jp To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: ports/3773: Fixed port: qvwm-1.0b8a Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3773 >Category: ports >Synopsis: Fixed port: qvwm-1.0b8a >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue Jun 3 20:00:00 PDT 1997 >Last-Modified: >Originator: Yukihiro Nakai >Organization: >Release: 3.0-CURRENT >Environment: >Description: I have updated qvwm port to follow the latest version. Please enjoy.... Remove file: files/BUGS.en files/CHANGES.en files/FAQ.en files/FAQ.jp files/INSTALL.en files/MANUAL.jp files/README.en files/TODO.en patches/patch-ac ---------- begin 644 qvwm-update.diff.gz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end >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Tue Jun 3 20:10:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA15034 for ports-outgoing; Tue, 3 Jun 1997 20:10:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA15026; Tue, 3 Jun 1997 20:10:01 -0700 (PDT) Resent-Date: Tue, 3 Jun 1997 20:10:01 -0700 (PDT) Resent-Message-Id: <199706040310.UAA15026@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, Nakai@Mlab.t.u-tokyo.ac.jp Received: (from nobody@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA14401; Tue, 3 Jun 1997 20:02:30 -0700 (PDT) Message-Id: <199706040302.UAA14401@hub.freebsd.org> Date: Tue, 3 Jun 1997 20:02:30 -0700 (PDT) From: Nakai@Mlab.t.u-tokyo.ac.jp To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: ports/3774: Fixed port: xmascot-2.5p2 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3774 >Category: ports >Synopsis: Fixed port: xmascot-2.5p2 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Tue Jun 3 20:10:00 PDT 1997 >Last-Modified: >Originator: Yukihiro Nakai >Organization: >Release: 3.0-current >Environment: >Description: I have updated xmascot port to follow its latest version. Please enjoy.... Yukihiro Nakai -------------- diff -ruN xmascot.orig/Makefile xmascot/Makefile --- xmascot.orig/Makefile Wed Jun 4 11:56:20 1997 +++ xmascot/Makefile Wed Jun 4 11:57:14 1997 @@ -1,19 +1,19 @@ # New ports collection makefile for: xmascot -# Version required: 2.5 +# Version required: 2.5p2 # Date created: 20 November 1996 # Whom: Yukihiro Nakai # # $Id: Makefile,v 1.1.1.1 1996/11/19 12:23:50 asami Exp $ # -DISTNAME= xmascot2.5 -PKGNAME= xmascot-2.5 +DISTNAME= xmascot2.5p2 +PKGNAME= xmascot-2.5p2 CATEGORIES= x11 -MASTER_SITES= ftp://cclub.tutcc.tut.ac.jp/pub/xmascot/ \ - ftp://ftp.pu-toyama.ac.jp/pub/.4/ftpmail/cclub.tutcc.tut.ac.jp/pub/xmascot/ +MASTER_SITES= ftp://cclub.tutcc.tut.ac.jp/pub/xmascot/ MAINTAINER= Nakai@Mlab.t.u-tokyo.ac.jp +USE_GMAKE= yes USE_IMAKE= yes .include diff -ruN xmascot.orig/files/md5 xmascot/files/md5 --- xmascot.orig/files/md5 Wed Jun 4 11:56:19 1997 +++ xmascot/files/md5 Sun May 25 20:21:06 1997 @@ -1 +1 @@ -MD5 (xmascot2.5.tar.gz) = 5023f4ca575fe935f1914d7db502cf4e +MD5 (xmascot2.5p2.tar.gz) = 4e953fbbc347086a12a894bfe8ca440b diff -ruN xmascot.orig/pkg/PLIST xmascot/pkg/PLIST --- xmascot.orig/pkg/PLIST Wed Jun 4 11:56:20 1997 +++ xmascot/pkg/PLIST Sun May 25 20:44:55 1997 @@ -1,3 +1,4 @@ +bin/xmascot lib/X11/xmascot/pin.mag lib/X11/xmascot/chain.mag lib/X11/xmascot/mail_r.mag @@ -19,5 +20,4 @@ lib/X11/xmascot/mi2.raw lib/X11/xmascot/mitime.au lib/X11/xmascot/mitime.raw -bin/xmascot man/man1/xmascot.1.gz >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Tue Jun 3 20:28:34 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA15946 for ports-outgoing; Tue, 3 Jun 1997 20:28:34 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id UAA15936; Tue, 3 Jun 1997 20:28:26 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id UAA05608; Tue, 3 Jun 1997 20:27:35 -0700 (PDT) Date: Tue, 3 Jun 1997 20:27:35 -0700 (PDT) Message-Id: <199706040327.UAA05608@freefall.freebsd.org> To: sutton@aardvark.apana.org.au, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3625 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port - connect4 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 20:24:35 PDT 1997 State-Changed-Why: Thanks, committed. Here are the changes: === diff -ru connect4/Makefile connect4.new/Makefile --- connect4/Makefile Sun May 18 19:56:25 1997 +++ connect4.new/Makefile Tue Jun 3 20:15:48 1997 @@ -10,30 +10,26 @@ DISTNAME= connect4 PKGNAME= connect4-3.2 CATEGORIES= games -MASTER_SITES= ftp://scitsc.wlv.ac.uk/pub/infomagic/usenet/games/volume6/ +MASTER_SITES= ftp://ftp.gu.kiev.ua/pub/cdrom5/games/volume6/ \ + ftp://scitsc.wlv.ac.uk/pub/infomagic/usenet/games/volume6/ +EXTRACT_SUFX= "" MAINTAINER= sutton@aardvark.apana.org.au -DEPENDS= gunshar:${PORTSDIR}/archivers/gshar+gunshar -EXTRACT_SUFX= "" +BUILD_DEPENDS= gunshar:${PORTSDIR}/archivers/gshar+gunshar + EXTRACT_CMD= gunshar EXTRACT_BEFORE_ARGS= "" +NO_WRKSUBDIR= yes +MAN6= connect4.6 -# Directories -# MANDIR= ${PREFIX}/man/man LIBDIR= ${PREFIX}/lib -NO_WRKSUBDIR= "yes" - -MAN6=connect4.6 -# Distribution does not include an install target. So here it is. -# do-install: ${INSTALL_PROGRAM} ${WRKSRC}/c4 ${PREFIX}/bin/connect4 - -${MKDIR} ${LIBDIR}/connect4 + ${MKDIR} ${LIBDIR}/connect4 ${INSTALL_DATA} -m 666 /dev/null ${LIBDIR}/connect4/scores ${INSTALL_MAN} ${FILESDIR}/connect4.6 ${MANDIR}6/ .include - diff -ru connect4/pkg/COMMENT connect4.new/pkg/COMMENT --- connect4/pkg/COMMENT Tue Apr 15 05:39:57 1997 +++ connect4.new/pkg/COMMENT Tue Jun 3 20:07:52 1997 @@ -1 +1 @@ -A curses version of the classic game. \ No newline at end of file +A curses version of the classic game. === I couldn't get to the UK site so I added another that I found by ftpsearch. Also note that ${MKDIR} already includes "-p". From owner-freebsd-ports Tue Jun 3 20:46:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA16936 for ports-outgoing; Tue, 3 Jun 1997 20:46:39 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id UAA16886; Tue, 3 Jun 1997 20:46:04 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id UAA05813; Tue, 3 Jun 1997 20:45:13 -0700 (PDT) Date: Tue, 3 Jun 1997 20:45:13 -0700 (PDT) Message-Id: <199706040345.UAA05813@freefall.freebsd.org> To: ejc@bazzle.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3620 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port: OmniBroker State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 20:41:07 PDT 1997 State-Changed-Why: Thanks, committed. The original tarball has been upgraded to 1.0, so I changed the Makefile and checksum file accordingly. === diff -ru omniBroker/Makefile omniBroker.new/Makefile --- omniBroker/Makefile Sun May 18 12:07:37 1997 +++ omniBroker.new/Makefile Tue Jun 3 20:22:24 1997 @@ -1,19 +1,21 @@ # New ports collection makefile for: omniBroker # Date created: 17 May 1997 # Whom: ejc@bazzle.com -# Version required: 1.0b8 +# Version required: 1.0 # # $Id$ # -DISTNAME= OB-1.0b8 -PKGNAME= omniBroker_1.0b8 +DISTNAME= OB-1.0 +PKGNAME= omniBroker-1.0 CATEGORIES= devel -MASTER_SITES= ftp://ftp.ooc.com/pub/OmniBroker/OB-1.0b8.tar.gz -DISTFILES= OB-1.0b8.tar.gz +MASTER_SITES= ftp://ftp.ooc.com/pub/OmniBroker/ + MAINTAINER= ejc@bazzle.com MAN1= idl.1 +HAS_CONFIGURE= yes +CONFIGURE_ENV= CXX=c++ CXXFLAGS="--no-implicit-templates -fhandle-exceptions -Wall" post-install: ${LDCONFIG} -m $(PREFIX)/lib diff -ru omniBroker/files/md5 omniBroker.new/files/md5 --- omniBroker/files/md5 Sun May 18 10:55:29 1997 +++ omniBroker.new/files/md5 Tue Jun 3 19:51:05 1997 @@ -1 +1 @@ -MD5 (OB-1.0b8.tar.gz) = 4fd1df8942928274d3596922445ef2a5 +MD5 (OB-1.0.tar.gz) = 8a4afce8d6a5a5541d60ec7d5d9e698a Only in omniBroker: scripts === Also as you can see that you don't need to create a custom script just to give environment variables to configure. Hmm, now that I think about it, I should have installed LICENSE too. I'll change that now. From owner-freebsd-ports Tue Jun 3 20:53:07 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA17577 for ports-outgoing; Tue, 3 Jun 1997 20:53:07 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id UAA17547; Tue, 3 Jun 1997 20:52:39 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id UAA05991; Tue, 3 Jun 1997 20:51:48 -0700 (PDT) Date: Tue, 3 Jun 1997 20:51:48 -0700 (PDT) Message-Id: <199706040351.UAA05991@freefall.freebsd.org> To: sutton@aardvark.apana.org.au, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3626 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port - Macintosh file utilities State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 20:48:06 PDT 1997 State-Changed-Why: Thanks, committed. === diff -ru macutils/Makefile macutils.new/Makefile --- macutils/Makefile Sun May 18 19:51:36 1997 +++ macutils.new/Makefile Tue Jun 3 20:38:07 1997 @@ -9,17 +9,15 @@ DISTNAME= macutils_2.0b3.orig PKGNAME= macutils-2.0b3 -EXTRACT_SUFX= .tar.gz CATEGORIES= emulators -MASTER_SITES= ftp://sunsite.anu.edu.au/pub/linux/distributions/debian/bo/source/misc/ +MASTER_SITES= ${MASTER_SITE_SUNSITE} +MASTER_SITE_SUBDIR= distributions/debian/bo/source/otherosfs + +MAINTAINER= sutton@aardvark.apana.org.au WRKSRC= ${WRKDIR}/macutils-2.0b3.orig MAKEFILE= makefile -MAINTAINER= sutton@aardvark.apana.org.au - -# Directories and files -# MANDIR= ${PREFIX}/man/man BINDIR= ${PREFIX}/bin DOCDIR= ${PREFIX}/share/doc/macutils === Please use standard master sites whenever possible. From owner-freebsd-ports Tue Jun 3 20:54:59 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id UAA17741 for ports-outgoing; Tue, 3 Jun 1997 20:54:59 -0700 (PDT) Received: from time.cdrom.com (root@time.cdrom.com [204.216.27.226]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id UAA17729 for ; Tue, 3 Jun 1997 20:54:51 -0700 (PDT) Received: from time.cdrom.com (jkh@localhost [127.0.0.1]) by time.cdrom.com (8.8.5/8.6.9) with ESMTP id UAA04967; Tue, 3 Jun 1997 20:54:25 -0700 (PDT) To: asami@cs.berkeley.edu (Satoshi Asami) cc: bde@zeta.org.au, ports@FreeBSD.ORG Subject: Re: Ports 'make install' and mtree In-reply-to: Your message of "Tue, 03 Jun 1997 19:03:37 PDT." <199706040203.TAA04225@silvia.HIP.Berkeley.EDU> Date: Tue, 03 Jun 1997 20:54:25 -0700 Message-ID: <4963.865396465@time.cdrom.com> From: "Jordan K. Hubbard" Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > I thought MAKE_LOCAL has been deprecated (1.126 of src/Makefile). > Jordan, do you mind if I remove it from src/etc/Makefile too? Not at all. Jordan From owner-freebsd-ports Tue Jun 3 21:01:40 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA18227 for ports-outgoing; Tue, 3 Jun 1997 21:01:40 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA18209 for ; Tue, 3 Jun 1997 21:01:33 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id VAA04533; Tue, 3 Jun 1997 21:01:13 -0700 (PDT) Date: Tue, 3 Jun 1997 21:01:13 -0700 (PDT) Message-Id: <199706040401.VAA04533@silvia.HIP.Berkeley.EDU> To: jkh@time.cdrom.com CC: bde@zeta.org.au, ports@freebsd.org In-reply-to: <4963.865396465@time.cdrom.com> (jkh@time.cdrom.com) Subject: Re: Ports 'make install' and mtree From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * Not at all. Ok, it's gone now. Satoshi From owner-freebsd-ports Tue Jun 3 21:03:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA18372 for ports-outgoing; Tue, 3 Jun 1997 21:03:58 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA18365; Tue, 3 Jun 1997 21:03:50 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id VAA06202; Tue, 3 Jun 1997 21:02:58 -0700 (PDT) Date: Tue, 3 Jun 1997 21:02:58 -0700 (PDT) Message-Id: <199706040402.VAA06202@freefall.freebsd.org> To: ejc@bazzle.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3630 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Updated OmniBroker port State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 21:01:12 PDT 1997 State-Changed-Why: I already committed a 1.0 port based on your previous submission. Please check it. To avoid situations like this, please submit updates to a non-committed port as a followup to the previous message (a 'reply' to the 'thank you for your PR' will do). From owner-freebsd-ports Tue Jun 3 21:07:19 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA18545 for ports-outgoing; Tue, 3 Jun 1997 21:07:19 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA18539; Tue, 3 Jun 1997 21:07:13 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id VAA06284; Tue, 3 Jun 1997 21:06:22 -0700 (PDT) Date: Tue, 3 Jun 1997 21:06:22 -0700 (PDT) Message-Id: <199706040406.VAA06284@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, pst@FreeBSD.ORG Subject: Re: ports/3654 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: mkdist script is broken. Responsible-Changed-From-To: freebsd-ports->pst Responsible-Changed-By: asami Responsible-Changed-When: Tue Jun 3 21:06:00 PDT 1997 Responsible-Changed-Why: Maintainer of gnats port. From owner-freebsd-ports Tue Jun 3 21:23:50 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA19465 for ports-outgoing; Tue, 3 Jun 1997 21:23:50 -0700 (PDT) Received: from centaur.orion.ab.ca (orion.ab.ca [207.245.27.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA19454; Tue, 3 Jun 1997 21:23:46 -0700 (PDT) Received: from localhost (timp@localhost) by centaur.orion.ab.ca (8.8.5/8.6.12) with SMTP id VAA22774; Tue, 3 Jun 1997 21:30:05 GMT Date: Tue, 3 Jun 1997 21:30:05 +0000 () From: Tim Pushor To: questions@freebsd.org, ports@freebsd.org Subject: Ahhhh More pkg_add problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hello, I am attempting to create a package containing software I wrote for easy installation. The problem is that my package requires another package to be installed. I use the @pkgdep statement in the packing list to state the dependancy. When I try to install my package and I don't have the package my package depends on installed, it installs anyway, but gives me an error (kind of) like this: /var/spool/db/pkg//+REQUIRED BY not found I was wondering: 1) Is there a way that I can say the dependant package _must_ be installed first, or otherwise abort the installation.. and 2) (somewhat unrelated0 is there a way that I can abort the install based on the return value of a shell script? For example, I tried: @exec /usr/bin/false as the second line of my packing list, and upon installation it gave me an error saying this failed (of course), but installation continued. I would like to say something like: This software will overwrite your sendmai configuration.. Do you wish to proceed? (Y/N), and if the user says N, the package installation aborts. Is this possible without hacks? Tim --- Tim Pushor Orion Technologies Inc. Technical Director Phone: (403) 284-0042 timp@orion.ab.ca support@orion.ab.ca http://www.orion.ab.ca/~timp http://www.orion.ab.ca "communication leadership through innovation" From owner-freebsd-ports Tue Jun 3 21:43:13 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA20735 for ports-outgoing; Tue, 3 Jun 1997 21:43:13 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA20723; Tue, 3 Jun 1997 21:43:01 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id VAA06870; Tue, 3 Jun 1997 21:42:10 -0700 (PDT) Date: Tue, 3 Jun 1997 21:42:10 -0700 (PDT) Message-Id: <199706040442.VAA06870@freefall.freebsd.org> To: Scott.Blachowicz@seaslug.org, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3647 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port of nmh-0.14 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 21:40:53 PDT 1997 State-Changed-Why: Thanks, committed. Changes: === diff -ru nmh-port/Makefile nmh-port.new/Makefile --- nmh-port/Makefile Tue May 20 21:20:13 1997 +++ nmh-port.new/Makefile Tue Jun 3 21:27:09 1997 @@ -3,7 +3,7 @@ # Date created: 20 May 1997 # Whom: Scott Blachowicz # -# $Id: Makefile,v 1.3 1997/05/21 04:20:13 scott Exp $ +# $Id$ # DISTNAME= nmh-0.14 @@ -13,7 +13,8 @@ MAINTAINER= Scott.Blachowicz@seaslug.org GNU_CONFIGURE= yes -CONFIGURE_ARGS= --libexecdir=$(PREFIX)/libexec/nmh --sysconfdir=$(PREFIX)/etc/nmh --prefix=$(PREFIX) --enable-nmh-pop +CONFIGURE_ARGS= --libexecdir=$(PREFIX)/libexec/nmh \ + --sysconfdir=$(PREFIX)/etc/nmh --enable-nmh-pop MAN1= ali.1 anno.1 burst.1 comp.1 dist.1 flist.1 folder.1 forw.1 inc.1 \ mark.1 mh-chart.1 mhl.1 mhmail.1 mhn.1 mhparam.1 mhpath.1 msgchk.1 msh.1 \ diff -ru nmh-port/pkg/COMMENT nmh-port.new/pkg/COMMENT --- nmh-port/pkg/COMMENT Sat May 17 22:15:05 1997 +++ nmh-port.new/pkg/COMMENT Tue Jun 3 21:27:57 1997 @@ -1 +1 @@ -nmh, a cleaned up MH mailer suite. +A cleaned up MH mailer suite. === GNU_CONFIGURE already includes "--prefix=${PREFIX}" in CONFIGURE_ARGS. Also, no need to put package name in front of COMMENT. From owner-freebsd-ports Tue Jun 3 22:27:32 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA24416 for ports-outgoing; Tue, 3 Jun 1997 22:27:32 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA24390; Tue, 3 Jun 1997 22:27:18 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id WAA07256; Tue, 3 Jun 1997 22:26:26 -0700 (PDT) Date: Tue, 3 Jun 1997 22:26:26 -0700 (PDT) Message-Id: <199706040526.WAA07256@freefall.freebsd.org> To: andy@icc.surw.chel.su, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3692 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port of games/bs State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 22:26:01 PDT 1997 State-Changed-Why: Thanks, imported. === diff -ru bs-2.1/Makefile bs-2.1.new/Makefile --- bs-2.1/Makefile Mon May 26 10:58:43 1997 +++ bs-2.1.new/Makefile Tue Jun 3 22:05:43 1997 @@ -3,13 +3,12 @@ # Date created: 11 May 1997 # Whom: Andrey Zakhvatov # -# +# $Id$ # DISTNAME= bs-2.1 CATEGORIES= games -MASTER_SITES= ftp://locke.ccil.org -MASTER_SITE_SUBDIR= pub/esr +MASTER_SITES= ftp://locke.ccil.org/pub/esr/ MAINTAINER= andy@icc.surw.chel.su From owner-freebsd-ports Tue Jun 3 22:42:51 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA25507 for ports-outgoing; Tue, 3 Jun 1997 22:42:51 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA25070; Tue, 3 Jun 1997 22:37:12 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id WAA07441; Tue, 3 Jun 1997 22:36:20 -0700 (PDT) Date: Tue, 3 Jun 1997 22:36:20 -0700 (PDT) Message-Id: <199706040536.WAA07441@freefall.freebsd.org> To: andy@icc.surw.chel.su, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3454 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port submission: ztrack-1.0 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 22:35:03 PDT 1997 State-Changed-Why: Thanks, imported. Please use standard master sites whenever possible. ${INSTALL_PROGRAM} strips the binary for you. Instead of compressing the manual page by yourself, you can set MAN6 (or others) and let bsd.port.mk do that for you. === diff -ru ztrack-1.0/Makefile ztrack-1.0.new/Makefile --- ztrack-1.0/Makefile Thu May 1 05:56:05 1997 +++ ztrack-1.0.new/Makefile Tue Jun 3 22:33:39 1997 @@ -8,17 +8,17 @@ DISTNAME= ztrack-1.0 CATEGORIES= games -MASTER_SITES= ftp://sunsite.unc.edu/pub/Linux/games/crt/ +MASTER_SITES= ${MASTER_SITE_SUNSITE} +MASTER_SITE_SUBDIR= games/arcade MAINTAINER= andy@icc.surw.chel.su WRKSRC= ${WRKDIR}/ztrack ALL_TARGET= ztrack +MAN6= ztrack.6 do-install: - @ strip ${WRKSRC}/ztrack - @ install ${WRKSRC}/ztrack ${PREFIX}/bin/ztrack - @ gzip ${WRKSRC}/ztrack.6 - @ install ${WRKSRC}/ztrack.6.gz ${PREFIX}/man/man6/ztrack.6.gz + @${INSTALL_PROGRAM} ${WRKSRC}/ztrack ${PREFIX}/bin/ztrack + @${INSTALL_MAN} ${WRKSRC}/ztrack.6 ${PREFIX}/man/man6 .include From owner-freebsd-ports Tue Jun 3 22:51:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA26940 for ports-outgoing; Tue, 3 Jun 1997 22:51:08 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA26927; Tue, 3 Jun 1997 22:50:58 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id WAA07623; Tue, 3 Jun 1997 22:50:06 -0700 (PDT) Date: Tue, 3 Jun 1997 22:50:06 -0700 (PDT) Message-Id: <199706040550.WAA07623@freefall.freebsd.org> To: sauber@netcom.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3440 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: port of webstone submitted State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 22:48:02 PDT 1997 State-Changed-Why: Thanks, committed. Use of relative paths is not recommended in port Makefiles. Please use ${WRKDIR} and other appropriate variables. Also, I don't understand why you tried to create the directories after the files were extracted (but I used those lines to add @dirrm, thanks! :). === diff -ru webstone/Makefile webstone.new/Makefile --- webstone/Makefile Tue Mar 25 15:56:01 1997 +++ webstone.new/Makefile Tue Jun 3 22:46:58 1997 @@ -8,19 +8,18 @@ DISTNAME= WebStone-2.0 PKGNAME= webstone-2.0.1 -CATEGORIES= benchmarks +CATEGORIES= www benchmarks MASTER_SITES= http://www.sgi.com/Products/WebFORCE/WebStone/ MAINTAINER= sauber@netcom.com GNU_CONFIGURE= yes -WRKSRC= work/WebStone/src +WRKSRC= ${WRKDIR}/WebStone/src ALL_TARGET= install NO_INSTALL_MANPAGES=yes post-extract: - ( cd work/WebStone/src; make clobber ) - + ( cd ${WRKSRC}; make clobber ) do-install: @${MKDIR} ${PREFIX}/webstone/bin diff -ru webstone/pkg/PLIST webstone.new/pkg/PLIST --- webstone/pkg/PLIST Thu Mar 6 16:49:42 1997 +++ webstone.new/pkg/PLIST Tue Jun 3 22:44:35 1997 @@ -35,5 +35,6 @@ webstone/conf/paths.pl webstone/conf/paths.sh webstone/conf/testbed -@exec mkdir -p %D/webstone/bin -@exec mkdir -p %D/webstone/conf +@dirrm webstone/bin +@dirrm webstone/conf +@dirrm webstone From owner-freebsd-ports Tue Jun 3 22:54:56 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA27190 for ports-outgoing; Tue, 3 Jun 1997 22:54:56 -0700 (PDT) Received: from proxy.centtech.com (moat.centtech.com [206.196.95.10]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA27185 for ; Tue, 3 Jun 1997 22:54:46 -0700 (PDT) Received: (from smap@localhost) by proxy.centtech.com (8.8.4/8.6.9) id AAA01014 for ; Wed, 4 Jun 1997 00:53:50 -0500 (CDT) X-Authentication-Warning: proxy.centtech.com: smap set sender to using -f Received: from panhead.centtech.com(204.177.173.10) by proxy.centtech.com via smap (V2.0) id xma001012; Wed, 4 Jun 97 00:53:49 -0500 Received: from genesis.centtech.com (genesis.centtech.com [10.177.176.27]) by harley.centtech.com (8.8.4/8.6.9) with SMTP id AAA25227 for ; Wed, 4 Jun 1997 00:48:48 -0500 (CDT) Received: from genesis (localhost) by genesis.centtech.com (4.1/SMI-4.1) id AA03004; Wed, 4 Jun 97 00:48:47 CDT Message-Id: <339501BF.41C67EA6@centtech.com> Date: Wed, 04 Jun 1997 00:48:47 -0500 From: Luan Chau Organization: Centaur Technology, Inc., Austin, Texas, USA X-Mailer: Mozilla 3.0Gold (X11; I; SunOS 4.1.4 sun4m) Mime-Version: 1.0 To: freebsd-ports@freebsd.org Subject: Why does nthe Make command complaint Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hello, I get message sushc as -- make: Fatal error in reader: Makefile, line 21: Unexpected end of line seen when I type make in the port directory where Makefile is found. Please tell me what does that mean? Thanks (o o) +--------------------------oOO--(_)--OOo---------------------------+ | | | Luan Chau ("`-''-/").___..--''"`-._ | | Centaur Technology `6_ 6 ) `-. ( ).`-.__.`) | | 512-418-5710 (_Y_.)' ._ ) `._ `. ``-..-' | | 512-896-5849 _..`--'_..-_/ /--'_.' ,' | | luan@centtech.com (il),-'' (li),' ((!.-' | | | +------------------------------------------------------------------+ From owner-freebsd-ports Tue Jun 3 23:01:36 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA27607 for ports-outgoing; Tue, 3 Jun 1997 23:01:36 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA27596; Tue, 3 Jun 1997 23:01:21 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id XAA07902; Tue, 3 Jun 1997 23:00:29 -0700 (PDT) Date: Tue, 3 Jun 1997 23:00:29 -0700 (PDT) Message-Id: <199706040600.XAA07902@freefall.freebsd.org> To: ejc@bazzle.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3619 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new CORBA port omniORB from Olivetti & Oracle Research State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Tue Jun 3 22:55:51 PDT 1997 State-Changed-Why: Thanks, committed. Here are the changes: === diff -ru omniORB/Makefile omniORB.new/Makefile --- omniORB/Makefile Sun May 18 10:30:39 1997 +++ omniORB.new/Makefile Tue Jun 3 21:54:05 1997 @@ -7,31 +7,33 @@ # DISTNAME= omniORB_2.2.0 -PKGNAME= omniORB_2.2.0 +PKGNAME= omniORB-2.2.0 CATEGORIES= devel MASTER_SITES= ftp://ftp.orl.co.uk/pub/omniORB/ -DISTFILES= omniORB_2.2.0.tar.gz + MAINTAINER= ejc@bazzle.com MAN1= omniidl2.1 nameclt.1 omniNames.1 catior.1 genior.1 pre-patch: - touch $(WRKDIR)/$(DISTNAME)/mk/freebsd_3.0.mk - ln -s $(WRKDIR)/$(DISTNAME)/mk/freebsd_3.0.mk ${WRKDIR}/${DISTNAME}/mk/config.mk - mkdir -p $(WRKDIR)/$(DISTNAME)/src/tool/omniidl2/omniidl2 - touch $(WRKDIR)/$(DISTNAME)/src/tool/omniidl2/omniidl2/Makefile - touch $(WRKDIR)/$(DISTNAME)/Makefile + ${TOUCH} ${WRKSRC}/mk/freebsd_3.0.mk + ln -s ${WRKSRC}/mk/freebsd_3.0.mk ${WRKDIR}/${DISTNAME}/mk/config.mk + ${MKDIR} ${WRKSRC}/src/tool/omniidl2/omniidl2 + ${TOUCH} ${WRKSRC}/src/tool/omniidl2/omniidl2/Makefile + ${TOUCH} ${WRKSRC}/Makefile post-install: - ${INSTALL_MAN} $(WRKDIR)/$(DISTNAME)/man/man1/* $(PREFIX)/man/man1 - mkdir -p $(PREFIX)/include/omniORB2 - mkdir -p $(PREFIX)/include/omnithread - ${INSTALL_DATA} $(WRKDIR)/$(DISTNAME)/include/omnithread.h $(PREFIX)/include - ${INSTALL_DATA} $(WRKDIR)/$(DISTNAME)/include/omniORB2/* $(PREFIX)/include/omniORB2 - ${INSTALL_DATA} $(WRKDIR)/$(DISTNAME)/include/omnithread/* $(PREFIX)/include/omnithread - mkdir -p $(PREFIX)/share/omniORB - (cd $(WRKDIR)/$(DISTNAME);find doc |cpio -pdumv $(PREFIX)/share/omniORB) - ${INSTALL_DATA} $(WRKDIR)/$(DISTNAME)/README.unix $(PREFIX)/share/omniORB + ${INSTALL_MAN} ${WRKSRC}/man/man1/* ${PREFIX}/man/man1 + ${MKDIR} ${PREFIX}/include/omniORB2 + ${MKDIR} ${PREFIX}/include/omnithread + ${INSTALL_DATA} ${WRKSRC}/include/omnithread.h ${PREFIX}/include + ${INSTALL_DATA} ${WRKSRC}/include/omniORB2/* ${PREFIX}/include/omniORB2 + ${INSTALL_DATA} ${WRKSRC}/include/omnithread/* ${PREFIX}/include/omnithread +.if !defined(NOPORTDOCS) + ${MKDIR} ${PREFIX}/share/doc/omniORB + ${INSTALL_DATA} ${WRKSRC}/README.unix ${PREFIX}/share/doc/omniORB + (cd ${WRKSRC}/doc; find . |cpio -pdumv ${PREFIX}/share/doc/omniORB) +.endif ${LDCONFIG} -m $(PREFIX)/lib .include diff -ru omniORB/pkg/PLIST omniORB.new/pkg/PLIST --- omniORB/pkg/PLIST Sun May 18 10:33:41 1997 +++ omniORB.new/pkg/PLIST Tue Jun 3 22:21:01 1997 @@ -1,13 +1,8 @@ -bin/omniidl2 -lib/libomnithread.a -lib/libomnithread.so.1.0 -lib/libomniORB2.a -lib/libomniORB2.so.1.0 -bin/omniNames bin/catior bin/genior bin/nameclt -include/omnithread.h +bin/omniNames +bin/omniidl2 include/omniORB2/CORBA.h include/omniORB2/CORBA_basetypes.h include/omniORB2/CORBA_sysdep.h @@ -25,77 +20,130 @@ include/omniORB2/rope.h include/omniORB2/seqtemplates.h include/omniORB2/templates.h +include/omnithread.h include/omnithread/nt.h include/omnithread/posix.h include/omnithread/solaris.h -man/man1/omniidl2.1.gz -man/man1/nameclt.1.gz -man/man1/omniNames.1.gz +lib/libomniORB2.a +lib/libomniORB2.so.1.0 +lib/libomnithread.a +lib/libomnithread.so.1.0 man/man1/catior.1.gz man/man1/genior.1.gz -share/omniORB/README.unix -share/omniORB/doc/omniNames/omniNames.html -share/omniORB/doc/omniNames/node1.html -share/omniORB/doc/omniNames/node2.html -share/omniORB/doc/omniNames/node3.html -share/omniORB/doc/omniNames/.ID_MAP.pag -share/omniORB/doc/omniNames/.ID_MAP.dir -share/omniORB/doc/omniNames/.IMG_PARAMS.pag -share/omniORB/doc/omniNames/.IMG_PARAMS.dir -share/omniORB/doc/omniNames/.ORIG_MAP.pag -share/omniORB/doc/omniNames/.ORIG_MAP.dir -share/omniORB/doc/omniORB2/labels.pl -share/omniORB/doc/omniORB2/omniORB2.html -share/omniORB/doc/omniORB2/.ID_MAP.pag -share/omniORB/doc/omniORB2/.ID_MAP.dir -share/omniORB/doc/omniORB2/.IMG_PARAMS.pag -share/omniORB/doc/omniORB2/.IMG_PARAMS.dir -share/omniORB/doc/omniORB2/.ORIG_MAP.pag -share/omniORB/doc/omniORB2/.ORIG_MAP.dir -share/omniORB/doc/omniORB2/img1.old -share/omniORB/doc/omniORB2/.nfs724A -share/omniORB/doc/omniORB2/img10.old -share/omniORB/doc/omniORB2/node1.html -share/omniORB/doc/omnithread/node2.html -share/omniORB/doc/omnithread/node3.html -share/omniORB/doc/omnithread/node4.html -share/omniORB/doc/omnithread/node5.html -share/omniORB/doc/omnithread/node6.html -share/omniORB/doc/omnithread/images.tex -share/omniORB/doc/omnithread/images.aux -share/omniORB/doc/omnithread/images.log -share/omniORB/doc/omnithread/img1.gif -share/omniORB/doc/omnithread/img1.old -share/omniORB/doc/utilities/images.pl -share/omniORB/doc/utilities/utilities.html -share/omniORB/doc/utilities/.ID_MAP.pag -share/omniORB/doc/utilities/.ID_MAP.dir -share/omniORB/doc/utilities/.IMG_PARAMS.pag -share/omniORB/doc/utilities/.IMG_PARAMS.dir -share/omniORB/doc/utilities/.ORIG_MAP.pag -share/omniORB/doc/utilities/.ORIG_MAP.dir -share/omniORB/doc/utilities/node1.html -share/omniORB/doc/utilities/node2.html -share/omniORB/doc/utilities/node3.html -share/omniORB/doc/utilities/images.tex -share/omniORB/doc/utilities/images.aux -share/omniORB/doc/utilities/images.log -share/omniORB/doc/utilities/img1.gif -share/omniORB/doc/utilities/img2.gif -share/omniORB/doc/omniNames.ps -share/omniORB/doc/omniORB2.dvi -share/omniORB/doc/omniORB2.ps -share/omniORB/doc/omniORB2.tex -share/omniORB/doc/omniNames.pdf -share/omniORB/doc/utilities.tex -share/omniORB/doc/omnithread.dvi -share/omniORB/doc/omnithread.pdf -share/omniORB/doc/omnithread.ps -share/omniORB/doc/omnithread.tex -share/omniORB/doc/omniORB2.pdf -share/omniORB/doc/utilities.ps -share/omniORB/doc/omniNames.dvi -share/omniORB/doc/utilities.pdf -share/omniORB/doc/utilities.dvi -share/omniORB/doc/omniNames.tex +man/man1/nameclt.1.gz +man/man1/omniNames.1.gz +man/man1/omniidl2.1.gz +share/doc/omniORB/README.unix +share/doc/omniORB/omniNames.dvi +share/doc/omniORB/omniNames.pdf +share/doc/omniORB/omniNames.ps +share/doc/omniORB/omniNames.tex +share/doc/omniORB/omniNames/.ID_MAP.dir +share/doc/omniORB/omniNames/.ID_MAP.pag +share/doc/omniORB/omniNames/.IMG_PARAMS.dir +share/doc/omniORB/omniNames/.IMG_PARAMS.pag +share/doc/omniORB/omniNames/.ORIG_MAP.dir +share/doc/omniORB/omniNames/.ORIG_MAP.pag +share/doc/omniORB/omniNames/node1.html +share/doc/omniORB/omniNames/node2.html +share/doc/omniORB/omniNames/node3.html +share/doc/omniORB/omniNames/omniNames.html +share/doc/omniORB/omniORB2/footnode.html +share/doc/omniORB/omniORB2/images.aux +share/doc/omniORB/omniORB2/images.log +share/doc/omniORB/omniORB2/images.pl +share/doc/omniORB/omniORB2/images.tex +share/doc/omniORB/omniORB2/img1.gif +share/doc/omniORB/omniORB2/img10.gif +share/doc/omniORB/omniORB2/img11.gif +share/doc/omniORB/omniORB2/img11.old +share/doc/omniORB/omniORB2/img12.gif +share/doc/omniORB/omniORB2/img12.old +share/doc/omniORB/omniORB2/img13.gif +share/doc/omniORB/omniORB2/img13.old +share/doc/omniORB/omniORB2/img2.gif +share/doc/omniORB/omniORB2/img2.old +share/doc/omniORB/omniORB2/img3.gif +share/doc/omniORB/omniORB2/img3.old +share/doc/omniORB/omniORB2/img4.gif +share/doc/omniORB/omniORB2/img4.old +share/doc/omniORB/omniORB2/img5.gif +share/doc/omniORB/omniORB2/img5.old +share/doc/omniORB/omniORB2/img6.gif +share/doc/omniORB/omniORB2/img6.old +share/doc/omniORB/omniORB2/img7.gif +share/doc/omniORB/omniORB2/img7.old +share/doc/omniORB/omniORB2/img8.gif +share/doc/omniORB/omniORB2/img8.old +share/doc/omniORB/omniORB2/img9.gif +share/doc/omniORB/omniORB2/img9.old +share/doc/omniORB/omniORB2/node2.html +share/doc/omniORB/omniORB2/node3.html +share/doc/omniORB/omniORB2/node4.html +share/doc/omniORB/omniORB2/node5.html +share/doc/omniORB/omniORB2.dvi +share/doc/omniORB/omniORB2.pdf +share/doc/omniORB/omniORB2.ps +share/doc/omniORB/omniORB2.tex +share/doc/omniORB/omniORB2/.ID_MAP.dir +share/doc/omniORB/omniORB2/.ID_MAP.pag +share/doc/omniORB/omniORB2/.IMG_PARAMS.dir +share/doc/omniORB/omniORB2/.IMG_PARAMS.pag +share/doc/omniORB/omniORB2/.ORIG_MAP.dir +share/doc/omniORB/omniORB2/.ORIG_MAP.pag +share/doc/omniORB/omniORB2/.nfs724A +share/doc/omniORB/omniORB2/img1.old +share/doc/omniORB/omniORB2/img10.old +share/doc/omniORB/omniORB2/labels.pl +share/doc/omniORB/omniORB2/node1.html +share/doc/omniORB/omniORB2/omniORB2.html +share/doc/omniORB/omnithread.dvi +share/doc/omniORB/omnithread.pdf +share/doc/omniORB/omnithread.ps +share/doc/omniORB/omnithread.tex +share/doc/omniORB/omnithread/.ID_MAP.dir +share/doc/omniORB/omnithread/.ID_MAP.pag +share/doc/omniORB/omnithread/.IMG_PARAMS.dir +share/doc/omniORB/omnithread/.IMG_PARAMS.pag +share/doc/omniORB/omnithread/.ORIG_MAP.dir +share/doc/omniORB/omnithread/.ORIG_MAP.pag +share/doc/omniORB/omnithread/images.aux +share/doc/omniORB/omnithread/images.log +share/doc/omniORB/omnithread/images.pl +share/doc/omniORB/omnithread/images.tex +share/doc/omniORB/omnithread/img1.gif +share/doc/omniORB/omnithread/img1.old +share/doc/omniORB/omnithread/node1.html +share/doc/omniORB/omnithread/node2.html +share/doc/omniORB/omnithread/node3.html +share/doc/omniORB/omnithread/node4.html +share/doc/omniORB/omnithread/node5.html +share/doc/omniORB/omnithread/node6.html +share/doc/omniORB/omnithread/omnithread.html +share/doc/omniORB/utilities.dvi +share/doc/omniORB/utilities.pdf +share/doc/omniORB/utilities.ps +share/doc/omniORB/utilities.tex +share/doc/omniORB/utilities/.ID_MAP.dir +share/doc/omniORB/utilities/.ID_MAP.pag +share/doc/omniORB/utilities/.IMG_PARAMS.dir +share/doc/omniORB/utilities/.IMG_PARAMS.pag +share/doc/omniORB/utilities/.ORIG_MAP.dir +share/doc/omniORB/utilities/.ORIG_MAP.pag +share/doc/omniORB/utilities/images.aux +share/doc/omniORB/utilities/images.log +share/doc/omniORB/utilities/images.pl +share/doc/omniORB/utilities/images.tex +share/doc/omniORB/utilities/img1.gif +share/doc/omniORB/utilities/img2.gif +share/doc/omniORB/utilities/node1.html +share/doc/omniORB/utilities/node2.html +share/doc/omniORB/utilities/node3.html +share/doc/omniORB/utilities/utilities.html +@dirrm include/omniORB2 +@dirrm share/doc/omniORB/omniNames +@dirrm share/doc/omniORB/omniORB2 +@dirrm share/doc/omniORB/omnithread +@dirrm share/doc/omniORB/utilities +@dirrm share/doc/omniORB @exec /sbin/ldconfig -m %D/lib === The docfiles are supposed to be in the directory "share/doc/", not "share//doc" (unless, of course, the port requires some files to be in "share/" anyway). By the way, I tried to compile this with -O2 optimization (just change "=" to "+=" in the first CFLAGS line in patches/patch-aa here), but it fails: === ===> src/tool/omniidl2/omniORB2_be Warning: Object directory not changed from original /ccd/tmp/work/omniORB/work/omniORB_2.2.0/src/tool/omniidl2/omniORB2_be c++ -O2 -pipe -fhandle-exceptions -I../include -I. -c o2be_array.cc -o o2be_array.o {standard input}: Assembler messages: {standard input}:6773: Error: Local symbol L6752 never defined. {standard input}:6773: Error: Local symbol L6753 never defined. {standard input}:6773: Error: Local symbol L6754 never defined. {standard input}:6773: Fatal error:3 errors, 0 warnings, no object file generated. *** Error code 1 Stop. === Does anyone know if this is just a bug in our C++ compiler? I really hate the idea of distributing a package in excess of 1MB compiled without any optimization. From owner-freebsd-ports Tue Jun 3 23:25:02 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA28475 for ports-outgoing; Tue, 3 Jun 1997 23:25:02 -0700 (PDT) Received: from time.cdrom.com (root@time.cdrom.com [204.216.27.226]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA28464 for ; Tue, 3 Jun 1997 23:24:55 -0700 (PDT) Received: from time.cdrom.com (jkh@localhost [127.0.0.1]) by time.cdrom.com (8.8.5/8.6.9) with ESMTP id XAA05543; Tue, 3 Jun 1997 23:24:54 -0700 (PDT) To: Tim Pushor cc: ports@FreeBSD.ORG Subject: Re: Ahhhh More pkg_add problems In-reply-to: Your message of "Tue, 03 Jun 1997 21:30:05 -0000." Date: Tue, 03 Jun 1997 23:24:54 -0700 Message-ID: <5540.865405494@time.cdrom.com> From: "Jordan K. Hubbard" Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > I am attempting to create a package containing software I wrote for easy > installation. The problem is that my package requires another package to > be installed. I use the @pkgdep statement in the packing list to state the > dependancy. > > When I try to install my package and I don't have the package my package > depends on installed, it installs anyway, but gives me an error (kind of) > like this: > > /var/spool/db/pkg//+REQUIRED BY not found Hmmmm. That _should_ work - let me look into it. > 2) (somewhat unrelated0 is there a way that I can abort the install based > on the return value of a shell script? For example, I tried: Yes, that's what the "requirements" script is for - take a look at the man page for pkg_create. Jordan From owner-freebsd-ports Wed Jun 4 00:09:56 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA00610 for ports-outgoing; Wed, 4 Jun 1997 00:09:56 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA00600; Wed, 4 Jun 1997 00:09:50 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA00538; Wed, 4 Jun 1997 00:09:49 -0700 (PDT) Date: Wed, 4 Jun 1997 00:09:49 -0700 (PDT) Message-Id: <199706040709.AAA00538@freefall.freebsd.org> To: trefor@flevel.co.uk, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3702 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Port of FXHTML for FreeBSD State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 00:08:09 PDT 1997 State-Changed-Why: Thanks, committed. By the way, please mention the filename (full URL preferred) in the PR. Also, it will make our lives easier if you tar the stuff up from the parent directory instead of within the fxhtml subdirectory. Here are my changes: === diff -ru fxhtml/Makefile fxhtml.new/Makefile --- fxhtml/Makefile Wed May 28 06:44:30 1997 +++ fxhtml.new/Makefile Tue Jun 3 23:55:12 1997 @@ -1,19 +1,16 @@ # New ports collection makefile for: fxhtml -# Version required: 1.14.5 -# Date created: 21 August 1994 -# Whom: jkh +# Version required: 1.6.7 +# Date created: 21 August 1994 +# Whom: Trefor S. # -# Makefile,v 1.13 1995/10/04 14:45:01 asami Exp +# $Id$ # DISTNAME= fxhtml-freebsd-1.6.7 +PKGNAME= fxhtml-1.6.7 CATEGORIES= www MASTER_SITES= ftp://ftp.flevel.co.uk/pub/fxhtml/ -CGI_BIN= /usr/local/www/cgi-bin/ -DOC_ROOT= /usr/local/www/data/ MAINTAINER= fxhtml@flevel.co.uk - -post-install: .include === Seems like you forgot to erase a bunch of stuff you didn't need after all. :) From owner-freebsd-ports Wed Jun 4 00:22:01 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA01124 for ports-outgoing; Wed, 4 Jun 1997 00:22:01 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA01103; Wed, 4 Jun 1997 00:21:54 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA00669; Wed, 4 Jun 1997 00:21:54 -0700 (PDT) Date: Wed, 4 Jun 1997 00:21:54 -0700 (PDT) Message-Id: <199706040721.AAA00669@freefall.freebsd.org> To: chris@chris.netmonger.net, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3370 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: tk41 doesn't build if not untarred into /usr/ports State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 00:21:19 PDT 1997 State-Changed-Why: This is hard to fix and thus not worth the effort. At least that's what I think. From owner-freebsd-ports Wed Jun 4 00:33:02 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA01821 for ports-outgoing; Wed, 4 Jun 1997 00:33:02 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA01738; Wed, 4 Jun 1997 00:32:36 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA00820; Wed, 4 Jun 1997 00:32:35 -0700 (PDT) Date: Wed, 4 Jun 1997 00:32:35 -0700 (PDT) Message-Id: <199706040732.AAA00820@freefall.freebsd.org> To: pjm@cs.ntu.edu.au, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3363 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: port of nana-1.00 for your collection State-Changed-From-To: open-analyzed State-Changed-By: asami State-Changed-When: Wed Jun 4 00:29:08 PDT 1997 State-Changed-Why: The distfile is no longer available at your site. I got the 1.05 distfile but the installation fails with install -c -s -o bin -g bin -m 555 nana-c++lg /usr/local/bin/nana-c++lg strip: /usr/local/bin/nana-c++lg: Inappropriate file type or format This is a shell script. At this point I'm going to give the port back to you. Please make necessary updates and re-submit (as a reply to this mail not a new send-pr). Here are my changes so far: === diff -ru nana/Makefile nana.new/Makefile --- nana/Makefile Mon Apr 21 03:48:17 1997 +++ nana.new/Makefile Wed Jun 4 00:19:27 1997 @@ -3,10 +3,10 @@ # Date created: 20th April 1997 # Whom: Phil Maker # -# $Id: Makefile,v 1.1.1.1 1997/04/20 19:29:24 pjm Exp $ +# $Id$ # -DISTNAME= nana-1.00 +DISTNAME= nana-1.05 CATEGORIES= devel MASTER_SITES= ftp://ftp.cs.ntu.edu.au/pub/nana/ @@ -14,9 +14,6 @@ GNU_CONFIGURE= yes USE_GMAKE= yes - -BUILD_DEPENDS = gmake:${PORTSDIR}/devel/gmake \ - gdb:${PORTSDIR}/devel/gdb MAN1 = nana.1 nana-clg.1 MAN3 = nana.3 I.3 DI.3 L.3 DL.3 Q.3 Only in nana.new: Makefile~ diff -ru nana/files/md5 nana.new/files/md5 --- nana/files/md5 Sun Apr 20 21:23:53 1997 +++ nana.new/files/md5 Wed Jun 4 00:22:57 1997 @@ -1 +1 @@ -MD5 (nana-1.00.tar.gz) = 28ca01ab1e7d9c998fd5216d651d4976 +MD5 (nana-1.05.tar.gz) = c7bd7c7dd13f13929ca23a9968ce6c39 diff -ru nana/pkg/DESCR nana.new/pkg/DESCR --- nana/pkg/DESCR Mon Apr 21 03:11:38 1997 +++ nana.new/pkg/DESCR Wed Jun 4 00:16:43 1997 @@ -20,5 +20,3 @@ o Support for before and after state saving and checking (x, x'). Phil Maker - - diff -ru nana/pkg/PLIST nana.new/pkg/PLIST --- nana/pkg/PLIST Mon Apr 21 03:09:14 1997 +++ nana.new/pkg/PLIST Wed Jun 4 00:17:03 1997 @@ -1,30 +1,30 @@ -lib/libnana.a -libexec/nanafilter -libexec/nana-run.gdb -libexec/nana-run-init.gdb -libexec/nana-trace.gdb bin/nana bin/nana-clg bin/nana-run bin/nana-trace -include/nana-config.h -include/nana.h include/DI.h -include/I.h include/DL.h -include/L.h -include/Q.h include/GDB.h +include/I.h +include/L.h include/L_buffer.h +include/Q.h +include/nana-config.h +include/nana.h include/now.h info/nana.info info/nana.info-1 info/nana.info-2 -man/man1/nana-clg.1 -man/man1/nana.1 -man/man3/Q.3 -man/man3/DI.3 -man/man3/nana.3 -man/man3/DL.3 -man/man3/I.3 -man/man3/L.3 +lib/libnana.a +libexec/nana-run-init.gdb +libexec/nana-run.gdb +libexec/nana-trace.gdb +libexec/nanafilter +man/man1/nana-clg.1.gz +man/man1/nana.1.gz +man/man3/DI.3.gz +man/man3/DL.3.gz +man/man3/I.3.gz +man/man3/L.3.gz +man/man3/Q.3.gz +man/man3/nana.3.gz === Please start from here (and test "make package"). From owner-freebsd-ports Wed Jun 4 00:37:56 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA02589 for ports-outgoing; Wed, 4 Jun 1997 00:37:56 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA02568; Wed, 4 Jun 1997 00:37:47 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA01065; Wed, 4 Jun 1997 00:37:47 -0700 (PDT) Date: Wed, 4 Jun 1997 00:37:47 -0700 (PDT) Message-Id: <199706040737.AAA01065@freefall.freebsd.org> To: Nakai@Mlab.t.u-tokyo.ac.jp, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3772 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Fixed port: giftool-1.0 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 00:36:13 PDT 1997 State-Changed-Why: Thanks, committed. By the way, here are the changes I made (orig + your patch vs. orig + your patch + my mods): === diff -ur giftool/Makefile giftool.new/Makefile --- giftool/Makefile Wed Jun 4 00:35:44 1997 +++ giftool.new/Makefile Wed Jun 4 00:26:54 1997 @@ -1,6 +1,6 @@ # New ports collection makefile for: giftool # Version required: 1.0 -# Date created: 7 March 1997 +# Date created: 14 October 1996 # Whom: Yukihiro Nakai # # $Id: Makefile,v 1.3 1996/12/07 09:28:43 max Exp $ @@ -18,25 +18,25 @@ ALL_TARGET= giftool pre-clean: - @ rm -f ${PATCHDIR}/* + @${RM} -f ${PATCHDIR}/patch-a[bc] pre-patch: .if defined(RETVALUE) - @ echo "Return value patch enabled....." - @ cp ${FILESDIR}/patch-aa ${PATCHDIR} + @${ECHO_MSG} "Return value patch enabled....." + @${CP} ${FILESDIR}/patch-aa ${PATCHDIR} .endif .if defined(MALLOCSIZE) - @ echo "Malloc size improve parch enabled....." - @ cp ${FILESDIR}/patch-ab ${PATCHDIR} + @${ECHO_MSG} "Malloc size improve parch enabled....." + @${CP} ${FILESDIR}/patch-ab ${PATCHDIR} .endif do-install: - @ ${INSTALL_PROGRAM} ${WRKSRC}/giftool ${PREFIX}/bin - @ ${MKDIR} -p ${PREFIX}/share/doc/giftool - @ for file in COPYRIGHT README; do \ - ${INSTALL_DATA} ${WRKSRC}/$$file ${PREFIX}/share/doc/giftool; \ - done - @ ${INSTALL_DATA} ${FILESDIR}/post-install-notes ${PREFIX}/share/doc/giftool + ${INSTALL_PROGRAM} ${WRKSRC}/giftool ${PREFIX}/bin + ${MKDIR} ${PREFIX}/share/doc/giftool +.for file in COPYRIGHT README + ${INSTALL_DATA} ${WRKSRC}/${file} ${PREFIX}/share/doc/giftool +.endfor + ${INSTALL_DATA} ${FILESDIR}/post-install-notes ${PREFIX}/share/doc/giftool post-install: .if !defined(BATCH) diff -ur giftool/pkg/PLIST giftool.new/pkg/PLIST --- giftool/pkg/PLIST Wed Jun 4 00:35:45 1997 +++ giftool.new/pkg/PLIST Wed Jun 4 00:26:17 1997 @@ -2,3 +2,4 @@ share/doc/giftool/COPYRIGHT share/doc/giftool/README share/doc/giftool/post-install-notes +@dirrm share/doc/giftool === Please don't change the "date created", that's the creation date, not modification date. Also you tried to remove the @dirrm, which doesn't make any sense.... From owner-freebsd-ports Wed Jun 4 00:42:22 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA03187 for ports-outgoing; Wed, 4 Jun 1997 00:42:22 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA03160; Wed, 4 Jun 1997 00:42:14 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA01150; Wed, 4 Jun 1997 00:42:14 -0700 (PDT) Date: Wed, 4 Jun 1997 00:42:14 -0700 (PDT) Message-Id: <199706040742.AAA01150@freefall.freebsd.org> To: eric@cybernut.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3390 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: submition of JED port. State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 00:40:55 PDT 1997 State-Changed-Why: Thanks, committed. I was going to send you the changes I made but I lost it...please take a look at the committed tarball and let me know if there is something you don't understand. From owner-freebsd-ports Wed Jun 4 00:49:42 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA03867 for ports-outgoing; Wed, 4 Jun 1997 00:49:42 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA03855; Wed, 4 Jun 1997 00:49:36 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA01308; Wed, 4 Jun 1997 00:49:35 -0700 (PDT) Date: Wed, 4 Jun 1997 00:49:35 -0700 (PDT) Message-Id: <199706040749.AAA01308@freefall.freebsd.org> To: bjn@visi.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3352 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port: cddbd State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 00:49:18 PDT 1997 State-Changed-Why: Thanks, imported! From owner-freebsd-ports Wed Jun 4 00:53:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA04281 for ports-outgoing; Wed, 4 Jun 1997 00:53:05 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA04264; Wed, 4 Jun 1997 00:52:54 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA01402; Wed, 4 Jun 1997 00:52:54 -0700 (PDT) Date: Wed, 4 Jun 1997 00:52:54 -0700 (PDT) Message-Id: <199706040752.AAA01402@freefall.freebsd.org> To: itojun@itojun.org, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3330 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: hylafax port seems to be broken (partly) State-Changed-From-To: open-feedback State-Changed-By: asami State-Changed-When: Wed Jun 4 00:52:18 PDT 1997 State-Changed-Why: hylafax has been upgraded to a new version, is this problem fixed? From owner-freebsd-ports Wed Jun 4 01:07:53 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA05060 for ports-outgoing; Wed, 4 Jun 1997 01:07:53 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA05052; Wed, 4 Jun 1997 01:07:40 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA01547; Wed, 4 Jun 1997 01:07:40 -0700 (PDT) Date: Wed, 4 Jun 1997 01:07:40 -0700 (PDT) Message-Id: <199706040807.BAA01547@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3335 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/hanemacs State-Changed-From-To: open-analyzed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:06:32 PDT 1997 State-Changed-Why: Can you take a look at editors/emacs and fix the port to use install-info correctly? By the way, I have already make some changes, please start from here. === diff -ru hanemacs/Makefile hanemacs.new/Makefile --- hanemacs/Makefile Mon Apr 7 22:26:41 1997 +++ hanemacs.new/Makefile Wed Jun 4 01:03:22 1997 @@ -12,10 +12,11 @@ MASTER_SITES= ftp://sunsite.kren.nm.kr/pub/packages/hangul/editor/HanEmacs/ \ ftp://ftp.kaist.ac.kr/pub/hangul/editor/HanEmacs/ \ ftp://sunsite.kren.nm.kr/pub/packages/hangul/editor/HanEmacs/ + WRKSRC= ${WRKDIR}/hanemacs-19.34 GNU_CONFIGURE= yes USE_GMAKE= yes -CONFIGURE_ARGS= i386--freebsd --with-x-toolkit --prefix=${PREFIX} +CONFIGURE_ARGS= i386--freebsd --with-x-toolkit STRIP= MAN1= emacs.1 etags.1 ctags.1 diff -ru hanemacs/pkg/PLIST hanemacs.new/pkg/PLIST --- hanemacs/pkg/PLIST Wed Apr 16 23:28:55 1997 +++ hanemacs.new/pkg/PLIST Wed Jun 4 01:05:12 1997 @@ -2,12 +2,12 @@ bin/b2m bin/rcs-checkin bin/hanemacs-19.34 -@exec ln -s %D/%F %B/hanemacs +@exec ln -sf %D/%F %B/hanemacs @unexec rm %B/hanemacs bin/etags bin/emacsclient -@exec if [ ! -d %d/share/hanemacs/site-lisp ]; then mkdir -p %D/share/hanemacs/site-lisp; fi -@exec if [ ! -d %d/share/hanemacs/19.34/site-lisp ]; then mkdir -p %D/share/hanemacs/19.34/site-lisp; fi +@exec if [ ! -d %D/share/hanemacs/site-lisp ]; then mkdir -p %D/share/hanemacs/site-lisp; fi +@exec if [ ! -d %D/share/hanemacs/19.34/site-lisp ]; then mkdir -p %D/share/hanemacs/19.34/site-lisp; fi @comment these two can fail if other ports are installed, no need to @comment scare user in that case @unexec rmdir %D/share/hanemacs/site-lisp 2>/dev/null || true From owner-freebsd-ports Wed Jun 4 01:11:27 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA05245 for ports-outgoing; Wed, 4 Jun 1997 01:11:27 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA05230; Wed, 4 Jun 1997 01:10:53 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA01692; Wed, 4 Jun 1997 01:10:52 -0700 (PDT) Date: Wed, 4 Jun 1997 01:10:52 -0700 (PDT) Message-Id: <199706040810.BAA01692@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3333 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korea/fvwm95 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:10:10 PDT 1997 State-Changed-Why: Thanks, imported. Here are the changes: === diff -ru fvwm95/Makefile fvwm95.new/Makefile --- fvwm95/Makefile Mon Apr 7 22:26:40 1997 +++ fvwm95.new/Makefile Wed Jun 4 00:56:36 1997 @@ -13,17 +13,17 @@ ftp://ftp.kaist.ac.kr/pub/hangul/X11/fvwm95/ \ ftp://sunsite.kren.nm.kr/pub/packages/hangul/X11/fvwm95 EXTRACT_SUFX= .tgz -WRKSRC= ${WRKDIR}/fvwm95-2.0.42ah3 MAINTAINER= junker@jazz.snu.ac.kr LIB_DEPENDS= Xpm\\.4\\.:${PORTSDIR}/graphics/xpm -BUILD_DEPENDS= /usr/local/lib/librplay.a:${PORTSDIR}/audio/rplay +BUILD_DEPENDS= ${LOCALBASE}/lib/librplay.a:${PORTSDIR}/audio/rplay +WRKSRC= ${WRKDIR}/fvwm95-2.0.42ah3 USE_X11= yes GNU_CONFIGURE= yes -CONFIGURE_ARGS+=--includedir=/usr/local/include \ - --libdir=/usr/local/lib +CONFIGURE_ARGS+=--includedir=${LOCALBASE}/include \ + --libdir=${LOCALBASE}/lib post-configure: @${ECHO} "See the sample.fvwm95rc file in the files directory" === I also sorted pkg/PLIST. From owner-freebsd-ports Wed Jun 4 01:14:35 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA05420 for ports-outgoing; Wed, 4 Jun 1997 01:14:35 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA05367; Wed, 4 Jun 1997 01:13:01 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA01790; Wed, 4 Jun 1997 01:13:00 -0700 (PDT) Date: Wed, 4 Jun 1997 01:13:00 -0700 (PDT) Message-Id: <199706040813.BAA01790@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3334 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/han State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:12:44 PDT 1997 State-Changed-Why: Thanks, committed! From owner-freebsd-ports Wed Jun 4 01:14:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA05457 for ports-outgoing; Wed, 4 Jun 1997 01:14:58 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA05439; Wed, 4 Jun 1997 01:14:45 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA01869; Wed, 4 Jun 1997 01:14:45 -0700 (PDT) Date: Wed, 4 Jun 1997 01:14:45 -0700 (PDT) Message-Id: <199706040814.BAA01869@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3336 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/hanmutt State-Changed-From-To: open-analyzed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:14:09 PDT 1997 State-Changed-Why: The version looks fairly old (0.60 vs. 0.75 in the mainline mutt), do you have any newer version? From owner-freebsd-ports Wed Jun 4 01:26:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA05921 for ports-outgoing; Wed, 4 Jun 1997 01:26:06 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA05896; Wed, 4 Jun 1997 01:25:52 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA02093; Wed, 4 Jun 1997 01:25:51 -0700 (PDT) Date: Wed, 4 Jun 1997 01:25:51 -0700 (PDT) Message-Id: <199706040825.BAA02093@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3338 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/hfvwm2 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:25:13 PDT 1997 State-Changed-Why: Thanks, committed. Changes: === diff -ru hfvwm2/Makefile hfvwm2.new/Makefile --- hfvwm2/Makefile Mon Apr 7 22:26:48 1997 +++ hfvwm2.new/Makefile Wed Jun 4 01:16:35 1997 @@ -23,8 +23,8 @@ @${CP} ${WRKSRC}/fvwm/fvwm2.man ${WRKSRC}/fvwm/hfvwm2.man post-install: - @mkdir -p ${PREFIX}/include/X11/pixmaps - ${INSTALL} -c -m 444 ${WRKSRC}/icons/*.xpm ${PREFIX}/include/X11/pixmaps - ${INSTALL} -c -m 444 ${WRKSRC}/sample.fvwmrc/wood.xpm ${PREFIX}/include/X11/pixmaps + @${MKDIR} ${PREFIX}/include/X11/pixmaps + ${INSTALL_DATA} ${WRKSRC}/icons/*.xpm ${PREFIX}/include/X11/pixmaps + ${INSTALL_DATA} ${WRKSRC}/sample.fvwmrc/wood.xpm ${PREFIX}/include/X11/pixmaps .include === I also sorted pkg/PLIST. From owner-freebsd-ports Wed Jun 4 01:32:53 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA06306 for ports-outgoing; Wed, 4 Jun 1997 01:32:53 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA06256; Wed, 4 Jun 1997 01:31:47 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA02236; Wed, 4 Jun 1997 01:31:46 -0700 (PDT) Date: Wed, 4 Jun 1997 01:31:46 -0700 (PDT) Message-Id: <199706040831.BAA02236@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3339 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/hlatexpsfonts State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:31:02 PDT 1997 State-Changed-Why: Thanks, imported. Changes: === diff -ru hlatexpsfonts/Makefile hlatexpsfonts.new/Makefile --- hlatexpsfonts/Makefile Mon Apr 7 22:26:43 1997 +++ hlatexpsfonts.new/Makefile Wed Jun 4 01:21:57 1997 @@ -25,8 +25,7 @@ done; \ ${INSTALL_DATA} Fontmap.local ${PREFIX}/share/fonts/HLaTeX-0.95-pfb/ -# to show a warning message to add fontpath for these fonts post-install: - @/bin/sh ${PKGDIR}/REQ ${PKGNAME} INSTALL + @${CAT} ${PKGDIR}/MESSAGE .include Only in hlatexpsfonts.new/pkg: MESSAGE Only in hlatexpsfonts/pkg: REQ === As you can see, I changed REQ to MESSAGE as it just prints a message. From owner-freebsd-ports Wed Jun 4 01:37:58 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA06668 for ports-outgoing; Wed, 4 Jun 1997 01:37:58 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA06634; Wed, 4 Jun 1997 01:37:41 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA02371; Wed, 4 Jun 1997 01:37:40 -0700 (PDT) Date: Wed, 4 Jun 1997 01:37:40 -0700 (PDT) Message-Id: <199706040837.BAA02371@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3341 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/hpscat State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:36:32 PDT 1997 State-Changed-Why: Thanks, imported. Changes: === diff -ru hpscat/Makefile hpscat.new/Makefile --- hpscat/Makefile Fri Apr 11 01:54:44 1997 +++ hpscat.new/Makefile Wed Jun 4 01:27:58 1997 @@ -14,28 +14,26 @@ ftp://sunsite.kren.nm.kr/pub/packages/hangul/print/ \ ftp://sunsite.kren.nm.kr/pub/packages/hangul/editor/ked/ DISTFILES= hpscat-jshin.tar.gz ked.tar.gz - + MAINTAINER= junker@jazz.snu.ac.kr -# it need hcode to run -RUN_DEPENDS= ${PREFIX}/bin/hcode:$(PORTSDIR)/korean/hcode +RUN_DEPENDS= hcode:$(PORTSDIR)/korean/hcode pre-configure: ${CP} ${FILESDIR}/hpscat.sh ${WRKSRC}/ do-install: @cd ${WRKSRC}; \ - ${MKDIR} -p ${PREFIX}/bin; \ - ${MKDIR} -p ${PREFIX}/share/fonts/ked-hpscat; \ + ${MKDIR} ${PREFIX}/share/fonts/ked-hpscat; \ ${INSTALL_PROGRAM} hpscat ${PREFIX}/bin; \ - ${INSTALL_SCRIPT} ${WRKSRC}/hpscat.sh ${PREFIX}/bin; \ + ${INSTALL_SCRIPT} hpscat.sh ${PREFIX}/bin; \ ${INSTALL_DATA} ${WRKDIR}/ked/Header ${PREFIX}/share/fonts/ked-hpscat; \ ${INSTALL_DATA} ${WRKDIR}/ked/Munjo ${PREFIX}/share/fonts/ked-hpscat; \ ${INSTALL_DATA} ${WRKDIR}/ked/MunjoBold ${PREFIX}/share/fonts/ked-hpscat; \ ${INSTALL_DATA} ${WRKDIR}/ked/PCMunjo ${PREFIX}/share/fonts/ked-hpscat; \ ${INSTALL_DATA} ${WRKDIR}/ked/Gotic ${PREFIX}/share/fonts/ked-hpscat; \ - ${INSTALL_DATA} ${WRKSRC}/README ${PREFIX}/share/fonts/ked-hpscat; \ - ${INSTALL_DATA} ${WRKSRC}/README.jshin ${PREFIX}/share/fonts/ked-hpscat;\ - ${INSTALL_DATA} ${WRKSRC}/README.jshin.ks ${PREFIX}/share/fonts/ked-hpscat + ${INSTALL_DATA} README ${PREFIX}/share/fonts/ked-hpscat; \ + ${INSTALL_DATA} README.jshin ${PREFIX}/share/fonts/ked-hpscat;\ + ${INSTALL_DATA} README.jshin.ks ${PREFIX}/share/fonts/ked-hpscat .include diff -ru hpscat/pkg/PLIST hpscat.new/pkg/PLIST --- hpscat/pkg/PLIST Fri Apr 11 01:55:17 1997 +++ hpscat.new/pkg/PLIST Wed Jun 4 01:28:21 1997 @@ -1,4 +1,3 @@ -@pkgdep kr-hcode-2.1mp2 bin/hpscat bin/hpscat.sh share/fonts/ked-hpscat/Header === You don't need @pkgdep, they are inserted automatically from *_DEPENDS when appropriate. From owner-freebsd-ports Wed Jun 4 01:45:40 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA07282 for ports-outgoing; Wed, 4 Jun 1997 01:45:40 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA07267; Wed, 4 Jun 1997 01:45:12 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA02505; Wed, 4 Jun 1997 01:45:11 -0700 (PDT) Date: Wed, 4 Jun 1997 01:45:11 -0700 (PDT) Message-Id: <199706040845.BAA02505@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3342 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/linuxdoc-sgml State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:44:17 PDT 1997 State-Changed-Why: Thanks, imported. Changes: === diff -ru linuxdoc-sgml/Makefile linuxdoc-sgml.new/Makefile --- linuxdoc-sgml/Makefile Mon Apr 7 22:26:46 1997 +++ linuxdoc-sgml.new/Makefile Wed Jun 4 01:34:19 1997 @@ -10,15 +10,13 @@ PKGNAME= kr-linuxdoc-sgml-1.6bh2 CATEGORIES= korean MASTER_SITES= ftp://jazz.snu.ac.kr/pub/unix/util/tools/ -EXTRACT_SUFX= .tar.gz MAINTAINER= junker@jazz.snu.ac.kr +RUN_DEPENDS= perl5.004:${PORTSDIR}/lang/perl5 + MAN1= sgml2html.1 sgml2latex.1 sgml2rtf.1 sgmls.1 \ sgml2info.1 sgml2lyx.1 sgml2txt.1 sgmlsasp.1 - -RUN_DEPENDS= perl5.003:${PORTSDIR}/lang/perl5 - NO_BUILD= yes do-install: === I also sorted the PLIST. From owner-freebsd-ports Wed Jun 4 01:48:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA07492 for ports-outgoing; Wed, 4 Jun 1997 01:48:47 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA07478; Wed, 4 Jun 1997 01:48:30 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA02627; Wed, 4 Jun 1997 01:48:30 -0700 (PDT) Date: Wed, 4 Jun 1997 01:48:30 -0700 (PDT) Message-Id: <199706040848.BAA02627@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3343 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/nh2ps State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:47:31 PDT 1997 State-Changed-Why: Thanks, commited. I added perl to the dependency list because your comment indicates it's needed. I also deleted the @pkgdep. === diff -ru nh2ps/Makefile nh2ps.new/Makefile --- nh2ps/Makefile Mon Apr 7 22:26:45 1997 +++ nh2ps.new/Makefile Wed Jun 4 01:41:06 1997 @@ -13,8 +13,9 @@ MAINTAINER= junker@jazz.snu.ac.kr -# it depends on HLaTeX-0.95(ps) fonts and perl-5.003 -RUN_DEPENDS= ${PREFIX}/share/fonts/HLaTeX-0.95-pfb:$(PORTSDIR)/korean/hlatexpsfonts +# it depends on HLaTeX-0.95(ps) fonts and perl-5.004 +RUN_DEPENDS= ${PREFIX}/share/fonts/HLaTeX-0.95-pfb:${PORTSDIR}/korean/hlatexpsfonts \ + perl5.004:${PORTSDIR}/lang/perl5 MAKE_FLAGS?= WIDTH=${WIDTH} HEIGHT=${HEIGHT} A4_PAPERSIZE=${A4_PAPERSIZE} -f MAN1= nh2ps.1 diff -ru nh2ps/pkg/PLIST nh2ps.new/pkg/PLIST --- nh2ps/pkg/PLIST Sat Apr 12 03:53:19 1997 +++ nh2ps.new/pkg/PLIST Wed Jun 4 01:41:23 1997 @@ -1,4 +1,3 @@ -@pkgdep kr-hlatexpsfonts-0.95 bin/nh2ps bin/nh2ps_opt man/man1/nh2ps.1.gz From owner-freebsd-ports Wed Jun 4 01:54:59 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA07804 for ports-outgoing; Wed, 4 Jun 1997 01:54:59 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA07794; Wed, 4 Jun 1997 01:54:51 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA02767; Wed, 4 Jun 1997 01:54:50 -0700 (PDT) Date: Wed, 4 Jun 1997 01:54:50 -0700 (PDT) Message-Id: <199706040854.BAA02767@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3344 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/netscape3 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 01:54:11 PDT 1997 State-Changed-Why: Thanks, imported. Changes: === diff -ru netscape3/Makefile netscape3.new/Makefile --- netscape3/Makefile Fri Apr 11 20:32:50 1997 +++ netscape3.new/Makefile Wed Jun 4 01:50:24 1997 @@ -16,7 +16,7 @@ DISTFILES= netscape-v301-export.x86-unknown-bsd.tar.gz netscape-ko-v301.alpha-dec-osf2.0.tar.gz MAINTAINER= junker@jazz.snu.ac.kr -# it depends on korean(hanyang) fonts + RUN_DEPENDS= ${X11BASE}/lib/X11/fonts/korean/hanyang:$(PORTSDIR)/korean/hanyangfonts RESTRICTED= "Commercial software" diff -ru netscape3/pkg/COMMENT netscape3.new/pkg/COMMENT --- netscape3/pkg/COMMENT Mon Apr 7 22:26:34 1997 +++ netscape3.new/pkg/COMMENT Wed Jun 4 01:50:44 1997 @@ -1 +1 @@ -netscape-3.01 web-surfboard(international version, Korean) +netscape-3.01 web-surfboard (international version, Korean) diff -ru netscape3/pkg/PLIST netscape3.new/pkg/PLIST --- netscape3/pkg/PLIST Fri Apr 11 20:33:15 1997 +++ netscape3.new/pkg/PLIST Wed Jun 4 01:51:13 1997 @@ -1,4 +1,3 @@ -@pkgdep kr-hanyangfonts-1.0 @cwd /usr/local bin/netscape lib/netscape/LICENSE === Note that I didn't test the port. From owner-freebsd-ports Wed Jun 4 02:05:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA08379 for ports-outgoing; Wed, 4 Jun 1997 02:05:39 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA08369; Wed, 4 Jun 1997 02:05:13 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA02972; Wed, 4 Jun 1997 02:05:12 -0700 (PDT) Date: Wed, 4 Jun 1997 02:05:12 -0700 (PDT) Message-Id: <199706040905.CAA02972@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3347 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of net/ztelnet State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 02:04:47 PDT 1997 State-Changed-Why: Thanks, committed. Changes: === diff -ru ztelnet/Makefile ztelnet.new/Makefile --- ztelnet/Makefile Mon Apr 7 22:26:47 1997 +++ ztelnet.new/Makefile Wed Jun 4 01:57:06 1997 @@ -18,15 +18,12 @@ post-patch: @cd ${WRKDIR}; \ - patch < ${FILESDIR}/ztelnet.patch.patch; \ - patch < ztelnet.patch + ${PATCH} --quiet < ${FILESDIR}/ztelnet.patch.patch; \ + ${PATCH} --quiet < ztelnet.patch do-install: @cd ${WRKSRC}; \ - ${MKDIR} -p ${PREFIX}/bin; \ + ${MKDIR} ${PREFIX}/bin; \ ${INSTALL_PROGRAM} telnet/telnet ${PREFIX}/bin/ztelnet - -post-install: - @strip ${PREFIX}/bin/ztelnet .include === From owner-freebsd-ports Wed Jun 4 02:08:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA08491 for ports-outgoing; Wed, 4 Jun 1997 02:08:26 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA08485; Wed, 4 Jun 1997 02:08:18 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA03105; Wed, 4 Jun 1997 02:08:17 -0700 (PDT) Date: Wed, 4 Jun 1997 02:08:17 -0700 (PDT) Message-Id: <199706040908.CAA03105@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3348 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/nhppf State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 02:07:35 PDT 1997 State-Changed-Why: Thanks, imported. Changes: === diff -ru nhppf/Makefile nhppf.new/Makefile --- nhppf/Makefile Fri Apr 18 22:59:40 1997 +++ nhppf.new/Makefile Wed Jun 4 02:04:00 1997 @@ -15,18 +15,16 @@ NO_BUILD= yes -# it depends on HLaTeX-0.95(ps) fonts and perl-5.003 -RUN_DEPENDS= ${PREFIX}/share/fonts/HLaTeX-0.95-pfb:$(PORTSDIR)/korean/hlatexpsfonts\ - perl5.003:${PORTSDIR}/lang/perl5 +RUN_DEPENDS= ${PREFIX}/share/fonts/HLaTeX-0.95-pfb:$(PORTSDIR)/korean/hlatexpsfonts \ + perl5.004:${PORTSDIR}/lang/perl5 do-configure: @cd ${WRKSRC}; \ - echo "#!${PREFIX}/bin/perl5.003" > scriptheader; \ - cat scriptheader nhppf > nhppf.new + ${ECHO_MSG} "#!${PREFIX}/bin/perl5.003" > scriptheader; \ + ${CAT} scriptheader nhppf > nhppf.new do-install: @cd ${WRKSRC}; \ - ${MKDIR} -p ${PREFIX}/bin; \ ${INSTALL_SCRIPT} nhppf.new ${PREFIX}/bin/nhppf .include diff -ru nhppf/pkg/PLIST nhppf.new/pkg/PLIST --- nhppf/pkg/PLIST Fri Apr 18 22:58:46 1997 +++ nhppf.new/pkg/PLIST Wed Jun 4 02:04:15 1997 @@ -1,3 +1 @@ -@pkgdep kr-hlatexpsfonts-0.95 -@pkgdep perl-5.003 bin/nhppf === Well, the regular stuff. From owner-freebsd-ports Wed Jun 4 02:31:20 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA09623 for ports-outgoing; Wed, 4 Jun 1997 02:31:20 -0700 (PDT) Received: from desk.jhs.no_domain (slip139-92-4-109.mu.de.ibm.net [139.92.4.109]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA09594; Wed, 4 Jun 1997 02:30:56 -0700 (PDT) Received: (from jhs@localhost) by desk.jhs.no_domain (8.8.5/8.8.5) id LAA00597; Wed, 4 Jun 1997 11:24:49 +0200 (MET DST) Date: Wed, 4 Jun 1997 11:24:49 +0200 (MET DST) Message-Id: <199706040924.LAA00597@desk.jhs.no_domain> To: committers@freebsd.org cc: hylafax@freebsd.org, gj@freebsd.org, asami@freebsd.org, Jun-ichiro itojun Itoh Subject: ports/comms/hylafax From: "Julian H. Stacey" Reply-To: "Julian H. Stacey" X-Email: jhs@freebsd.org, Fallback: jhs@gil.physik.rwth-aachen.de X-Web: http://www.freebsd.org/~jhs/ X-Company: Vector Systems Ltd, Unix & Internet Consultants. X-Address: Holz Strasse 27d, 80469 Munich, Germany X-Tel: Phone +49.89.268616, Fax +49.89.2608126, Data +49.89.26023276 X-Software: FreeBSD (Unix) + EXMH 1.6.9 (PGP key on web) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk To Committers etc, Unfortunately the recent ports/comm/hylafax CVS work was mistaken, the new port was simply dumped in place of the existing port, with no prior contact to either: the MAINTAINER= of the tried & tested port. or the mail list for ports/comms/hylafax. It is premature to delete the old port, before the new wrapper is widely tested, so please do the following CVS fix: - Restore original ports/comm/hylafax from Attic - Recommit new port as ports/comm/hylafax4 - Make a note in both ports/comm/hylafax*/Makefile of mail forum Thanks to Jun-ichiro itojun Itoh for providing a new port for hylafax-4 :-) I had recently on called for someone to provide a port for hylafax-4, as I was too busy to upgrade ports/comms/hylafax from V.3 soon. There's been not one review of the new port on . Hylafax is a very complex port, with dependancies on many system interfaces & other ports, so when things change, it is easy to damage &/or hard to check complete functionality remains intact (much harder than merely checking it compiles & appears to produce executable code). I have long stated on that when a new port was available, (whether from me or someone else,) that it should go into ports/comms/hylafax4, & that ports/comms/hylafax should remain for a long time, till the new port was confirmed fully OK by a variety of different current & cd-rom users & modem configurations etc. No one ever disagreed. I don't care what the 2 are called/renamed: {hylafax & hylafax4} {3 & 4} etc, just don't delete the old proven port yet ! Both should remain in ports/ (not just CVS) until wide test acceptance is reported on . (BTW I don't have CTM cvs-cur.3341.gz so can't look at commit logs localy yet.) Ref. majordomo@freebsd.org definition: hylafax FreeBSD specific aspects of Hylafax I have set header of this mail: To: committers@freebsd.org cc: hylafax@freebsd.org, gj@freebsd.org, asami@freebsd.org, Jun-ichiro itojun Itoh bcc: ports@freebsd.org Julian --- Julian H. Stacey jhs@freebsd.org http://www.freebsd.org/~jhs/ From owner-freebsd-ports Wed Jun 4 02:32:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA09751 for ports-outgoing; Wed, 4 Jun 1997 02:32:28 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA09720; Wed, 4 Jun 1997 02:32:08 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA03521; Wed, 4 Jun 1997 02:32:07 -0700 (PDT) Date: Wed, 4 Jun 1997 02:32:07 -0700 (PDT) Message-Id: <199706040932.CAA03521@freefall.freebsd.org> To: hideyuki@sat.t.u-tokyo.ac.jp, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3279 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port of KON2 State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 02:31:30 PDT 1997 State-Changed-Why: Thanks, imported. Here are my changes, FYI. === diff -ru kon2/Makefile kon2.new/Makefile --- kon2/Makefile Sat Apr 12 07:40:48 1997 +++ kon2.new/Makefile Wed Jun 4 02:27:21 1997 @@ -13,11 +13,12 @@ MASTER_SITES= ftp://ftp.tut.ac.jp/Linux/Packages/Utils/ \ ftp://ftp.iij.ad.jp/pub/X/XFree86/XFree86/3.1.1/untarred/xc/fonts/bdf/misc/ DISTFILES= kon2-0.3.tar.gz k14.bdf 7x14rk.bdf -EXTRACT_ONLY= kon2-0.3.tar.gz MAINTAINER= hideyuki@sat.t.u-tokyo.ac.jp -MAN1= ../ja_JP.EUC/man1/kon.1 +MAN1= kon.1 +MANLANG= ja_JP.EUC +EXTRACT_ONLY= kon2-0.3.tar.gz DOCDIR= ${PREFIX}/share/doc/kon2 diff -ru kon2/pkg/PLIST kon2.new/pkg/PLIST --- kon2/pkg/PLIST Wed Jun 4 02:31:16 1997 +++ kon2.new/pkg/PLIST Wed Jun 4 02:21:08 1997 @@ -1,8 +1,8 @@ -bin/kon bin/fld +bin/kon etc/kon.cfg +lib/fonts/7x14rk.bdf.gz +lib/fonts/k14.bdf.gz man/ja_JP.EUC/man1/kon.1.gz share/doc/kon2/README share/doc/kon2/README.FreeBSD -lib/fonts/k14.bdf.gz -lib/fonts/7x14rk.bdf.gz From owner-freebsd-ports Wed Jun 4 02:48:09 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA11287 for ports-outgoing; Wed, 4 Jun 1997 02:48:09 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA11268; Wed, 4 Jun 1997 02:48:03 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id CAA03716; Wed, 4 Jun 1997 02:48:02 -0700 (PDT) Date: Wed, 4 Jun 1997 02:48:02 -0700 (PDT) Message-Id: <199706040948.CAA03716@freefall.freebsd.org> To: handy@sag.space.lockheed.com, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/2842 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Expect port upgraded at master site; doesn't compile State-Changed-From-To: open-closed State-Changed-By: asami State-Changed-When: Wed Jun 4 02:47:00 PDT 1997 State-Changed-Why: Our expect port has been upgraded to 5.22. It will at least compile against the tarball at the backup sites (e.g., ftp.freebsd.org). From owner-freebsd-ports Wed Jun 4 03:40:46 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA16494 for ports-outgoing; Wed, 4 Jun 1997 03:40:46 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (ala-ca32-09.ix.netcom.com [199.35.209.73]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA16485 for ; Wed, 4 Jun 1997 03:40:43 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id DAA06150; Wed, 4 Jun 1997 03:40:36 -0700 (PDT) Date: Wed, 4 Jun 1997 03:40:36 -0700 (PDT) Message-Id: <199706041040.DAA06150@silvia.HIP.Berkeley.EDU> To: luan@centtech.com CC: freebsd-ports@freebsd.org In-reply-to: <339501BF.41C67EA6@centtech.com> (message from Luan Chau on Wed, 04 Jun 1997 00:48:47 -0500) Subject: Re: Why does nthe Make command complaint From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * make: Fatal error in reader: Makefile, line 21: Unexpected end of * line seen * * when I type make in the port directory where Makefile is found. * * Please tell me what does that mean? That means an unexpected end of line is seen in line 21 of the Makefile. :) Seriously, what's around line 21? Satoshi From owner-freebsd-ports Wed Jun 4 03:44:22 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA16652 for ports-outgoing; Wed, 4 Jun 1997 03:44:22 -0700 (PDT) Received: from mindy.greenhills.co.uk (mailgate.greenhills.co.uk [195.11.194.180]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id DAA16647 for ; Wed, 4 Jun 1997 03:44:15 -0700 (PDT) Received: (qmail 22463 invoked by uid 982); 4 Jun 1997 10:42:52 -0000 Message-ID: <19970604114252.51256@webcrawler.com> Date: Wed, 4 Jun 1997 11:42:52 +0100 From: Martijn Koster To: freebsd-ports@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.75e Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk subscribe From owner-freebsd-ports Wed Jun 4 05:27:43 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA24926 for ports-outgoing; Wed, 4 Jun 1997 05:27:43 -0700 (PDT) Received: from athena.milk.it (ssigala@line01.globalnet.it [194.185.53.33]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA24920; Wed, 4 Jun 1997 05:27:34 -0700 (PDT) Received: from localhost (ssigala@localhost) by athena.milk.it (8.8.4/8.8.4) with SMTP id OAA00504; Wed, 4 Jun 1997 14:27:45 +0200 X-Authentication-Warning: athena.milk.it: ssigala owned process doing -bs Date: Wed, 4 Jun 1997 14:27:44 +0200 (MET DST) From: "S. Sigala" X-Sender: ssigala@athena.milk.it To: Satoshi Asami cc: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3457 In-Reply-To: <199706032223.PAA01330@freefall.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Satoshi Asami wrote: > Synopsis: New ports for cutils 1.3.3 and umatrix > > State-Changed-From-To: open-analyzed > State-Changed-By: asami > State-Changed-When: Tue Jun 3 15:22:25 PDT 1997 > State-Changed-Why: > > Thanks, imported umatrix and moved source tarball to LOCAL_PORTS. > > As for cutils, please submit it as a "diff -ur". (Please read the > handbook's section on port upgrades.) > Ok, Thanks. Here is the patch. diff -ur cutils-old-port/Makefile cutils/Makefile --- cutils-old-port/Makefile Wed Apr 30 12:13:50 1997 +++ cutils/Makefile Wed Jun 4 14:19:09 1997 @@ -1,21 +1,21 @@ # New ports collection makefile for: cutils -# Version required: 1.3.2 -# Date created: 26 November 1996 -# Whom: Sandro Sigala +# Version required: 1.4 +# Date created: 26 November 1996 +# Date modified: 19 May 1997 +# Whom: Sandro Sigala # -# $Id: Makefile,v 1.5 1997/04/30 03:17:57 asami Exp $ +# $Id: Makefile,v 1.4 1996/12/24 11:11:43 max Exp $ # -DISTNAME= cutils-1.3.2 +DISTNAME= cutils-1.4 CATEGORIES= devel MASTER_SITES= ${MASTER_SITE_LOCAL} MAINTAINER= ssigala@globalnet.it -HAS_CONFIGURE= yes -MANCOMPRESSED= yes +GNU_CONFIGURE= yes MAN1= cdecl.1 cundecl.1 chilight.1 cinfo.1 cinfoc.1 cinfodc.1 \ - cobfusc.1 yyextract.1 yyref.1 + cobfusc.1 cunloop.1 yyextract.1 yyref.1 MAN5= cinfodb.5 .include Only in cutils-old-port/files: md5 Only in cutils-old-port: patches diff -ur cutils-old-port/pkg/COMMENT cutils/pkg/COMMENT --- cutils-old-port/pkg/COMMENT Sun Dec 8 22:26:14 1996 +++ cutils/pkg/COMMENT Wed Jun 4 14:19:09 1997 @@ -1 +1 @@ -Miscellaneous C programmer's utilities +Miscellaneous C programmer's utilities (source shrouder, YACC xref, ...) diff -ur cutils-old-port/pkg/DESCR cutils/pkg/DESCR --- cutils-old-port/pkg/DESCR Sun Dec 8 22:26:14 1996 +++ cutils/pkg/DESCR Wed Jun 4 14:19:09 1997 @@ -5,12 +5,9 @@ cdecl and cundecl - decode and encode C type declarations cobfusc - make a C source file unreadable but compilable chilight - highlight C source files with colors +cunloop - unloop C loops yyextract - extract grammar rules from yacc grammar yyref - yacc grammar reference program - -Experimental stuff not compiled by default: -safealloc - simple malloc(), free() and friends checking utility -scc - Small C Compiler Sandro Sigala ssigala@globalnet.it diff -ur cutils-old-port/pkg/PLIST cutils/pkg/PLIST --- cutils-old-port/pkg/PLIST Sun Dec 8 22:26:14 1996 +++ cutils/pkg/PLIST Wed Jun 4 14:19:09 1997 @@ -5,6 +5,7 @@ bin/cinfoc bin/cinfodc bin/cobfusc +bin/cunloop bin/yyextract bin/yyref man/man1/cdecl.1.gz @@ -14,9 +15,10 @@ man/man1/cinfoc.1.gz man/man1/cinfodc.1.gz man/man1/cobfusc.1.gz +man/man1/cunloop.1.gz man/man1/yyextract.1.gz man/man1/yyref.1.gz man/man5/cinfodb.5.gz -lib/cinfo/stdc.cinfo.db -lib/cinfo/stdclib.cinfo.db -lib/cinfo/unix.cinfo.db +share/cutils/cinfo/stdc.cinfo.db +share/cutils/cinfo/stdclib.cinfo.db +share/cutils/cinfo/unix.cinfo.db --------------- From owner-freebsd-ports Wed Jun 4 05:47:48 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA25929 for ports-outgoing; Wed, 4 Jun 1997 05:47:48 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA25913; Wed, 4 Jun 1997 05:47:30 -0700 (PDT) From: Thomas Gellekum Received: (from tg@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id FAA05714; Wed, 4 Jun 1997 05:47:27 -0700 (PDT) Date: Wed, 4 Jun 1997 05:47:27 -0700 (PDT) Message-Id: <199706041247.FAA05714@freefall.freebsd.org> To: tg@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, tg@FreeBSD.ORG Subject: Re: ports/3759 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: xtem-5.23 (X11 TEx Menu) port submitted (new and only almost perfect ;-)) Responsible-Changed-From-To: freebsd-ports->tg Responsible-Changed-By: tg Responsible-Changed-When: Wed Jun 4 05:44:32 PDT 1997 Responsible-Changed-Why: I took   Well, you can't expect emacs editing modes to work everywhere... I'll take this one. From owner-freebsd-ports Wed Jun 4 06:40:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA28490 for ports-outgoing; Wed, 4 Jun 1997 06:40:06 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA28458; Wed, 4 Jun 1997 06:40:02 -0700 (PDT) Date: Wed, 4 Jun 1997 06:40:02 -0700 (PDT) Message-Id: <199706041340.GAA28458@hub.freebsd.org> To: freebsd-ports Cc: From: student@postoffice.utas.edu.au Subject: Re: ports/3539: This is a port of poppassd that should work under 2.2 and above Reply-To: student@postoffice.utas.edu.au Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3539; it has been noted by GNATS. From: student@postoffice.utas.edu.au To: freebsd-gnats-submit@freebsd.org Cc: Subject: Re: ports/3539: This is a port of poppassd that should work under 2.2 and above Date: Wed, 04 Jun 1997 23:39:31 +0000 Well I have now tested it and it works well...(under 2.2-STABLE). Andrew From owner-freebsd-ports Wed Jun 4 07:49:48 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA01741 for ports-outgoing; Wed, 4 Jun 1997 07:49:48 -0700 (PDT) Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id HAA01736 for ; Wed, 4 Jun 1997 07:49:41 -0700 (PDT) From: patl@phoenix.volant.org Received: from asimov.phoenix.volant.org [205.179.79.65] by phoenix.volant.org with smtp (Exim 1.59 #1) id 0wZHNd-0006gK-00; Wed, 4 Jun 1997 07:49:41 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id HAA21981; Wed, 4 Jun 1997 07:49:37 -0700 Date: Wed, 4 Jun 1997 07:49:37 -0700 (PDT) Reply-To: patl@phoenix.volant.org Subject: Re: ispell port requires EMACS?! To: freebsd-ports@freebsd.org In-Reply-To: <199706040143.SAA04149@silvia.HIP.Berkeley.EDU> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > * I think the solution is to not byte-compile ispell.el. Emacs users > * will probably not notice that it take a little more time to load this > * one :-) > > That sounds about right. Jean-Marc, you care to do the honors? :) Don't forget to ensure that the install removes any OLD ispell.el file... -Pat From owner-freebsd-ports Wed Jun 4 08:30:55 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA03919 for ports-outgoing; Wed, 4 Jun 1997 08:30:55 -0700 (PDT) Received: from centaur.orion.ab.ca (orion.ab.ca [207.245.27.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA03889 for ; Wed, 4 Jun 1997 08:30:45 -0700 (PDT) Received: from localhost (timp@localhost) by centaur.orion.ab.ca (8.8.5/8.6.12) with SMTP id HAA23743; Wed, 4 Jun 1997 07:55:06 GMT Date: Wed, 4 Jun 1997 07:55:02 +0000 () From: Tim Pushor To: "Jordan K. Hubbard" cc: ports@FreeBSD.ORG Subject: Re: Ahhhh More pkg_add problems In-Reply-To: <5540.865405494@time.cdrom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Jordan K. Hubbard wrote: > > When I try to install my package and I don't have the package my package > > depends on installed, it installs anyway, but gives me an error (kind of) > > like this: > > > > /var/spool/db/pkg//+REQUIRED BY not found > > Hmmmm. That _should_ work - let me look into it. > > > 2) (somewhat unrelated0 is there a way that I can abort the install based > > on the return value of a shell script? For example, I tried: > > Yes, that's what the "requirements" script is for - take a look > at the man page for pkg_create. I think I need to clarify something. I am not using the pkg_create program to create packages. I have been simply creating the files +CONTENTS, etc etc in the root directory of my package directory, then tgzipping the structure up. I don't know if this will make a difference or not.. The dependancy problem is not that big an issue for me as if I can run a shell script upon installation I can check for the package to be installed and abort if it is not... Thanks for your help, Tim --- Tim Pushor Orion Technologies Inc. Technical Director Phone: (403) 284-0042 timp@orion.ab.ca support@orion.ab.ca http://www.orion.ab.ca/~timp http://www.orion.ab.ca "communication leadership through innovation" From owner-freebsd-ports Wed Jun 4 08:54:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA06168 for ports-outgoing; Wed, 4 Jun 1997 08:54:11 -0700 (PDT) Received: from bloke.statsci.com (bloke.statsci.com [206.63.206.184]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id IAA06157; Wed, 4 Jun 1997 08:54:06 -0700 (PDT) Received: from bloke.statsci.com [206.63.206.184] with smtp by bloke.statsci.com with smtp (/\oo/\ Smail3.1.29.1 #29.3 #3) id m0wZINx-000QdNC; Wed, 4 Jun 97 08:54 PDT Message-Id: X-Mailer: exmh version 2.0gamma 1/27/96 To: Satoshi Asami cc: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3647 References: <199706040442.VAA06870@freefall.freebsd.org> In-reply-to: Your message of "Tue, 03 Jun 1997 21:42:10 -0700." <199706040442.VAA06870@freefall.freebsd.org> Reply-to: scott@statsci.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 04 Jun 1997 08:54:05 -0700 From: Scott Blachowicz Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Satoshi Asami wrote: > Thanks, committed. Changes: Great...thanx. > diff -ru nmh-port/Makefile nmh-port.new/Makefile > --- nmh-port/Makefile Tue May 20 21:20:13 1997 > +++ nmh-port.new/Makefile Tue Jun 3 21:27:09 1997 > @@ -3,7 +3,7 @@ > # Date created: 20 May 1997 > # Whom: Scott Blachowicz > # > -# $Id: Makefile,v 1.3 1997/05/21 04:20:13 scott Exp $ > +# $Id$ Is there a standard way to maintain my copy of the port in RCS/CVS? Just turn off keyword expansion in my files ('cvs admin -ko' or whatever)? Scott Blachowicz Ph: 206/283-8802x240 Mathsoft (Data Analysis Products Div) 1700 Westlake Ave N #500 scott@statsci.com Seattle, WA USA 98109 Scott.Blachowicz@seaslug.org From owner-freebsd-ports Wed Jun 4 09:50:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA09817 for ports-outgoing; Wed, 4 Jun 1997 09:50:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA09811; Wed, 4 Jun 1997 09:50:01 -0700 (PDT) Date: Wed, 4 Jun 1997 09:50:01 -0700 (PDT) Message-Id: <199706041650.JAA09811@hub.freebsd.org> To: freebsd-ports Cc: From: Yoshiaki Uchikawa Subject: Re: ports/3357: I make "pari-GP" ports Reply-To: Yoshiaki Uchikawa Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3357; it has been noted by GNATS. From: Yoshiaki Uchikawa To: Satoshi Asami Cc: freebsd-gnats-submit@freebsd.org Subject: Re: ports/3357: I make "pari-GP" ports Date: Thu, 05 Jun 1997 01:30:21 +0900 >>>>> In <3394CE48.794BDF32@cs.berkeley.edu> >>>>> Satoshi Asami wrote: > Why is this port have NO_PACKAGE set? In README of Pari-GP packages: It can be freely copied and spread, as long as no files are modified, and that the whole package (source and manual), including this README file is included. We can distribute Pari-GP original package and patch files. But if it is binary pacage only , we can't. If we want to distribute binary package, we must distribute both binary packages and original packages. ---- yoshiaki@kt.rim.or.jp From owner-freebsd-ports Wed Jun 4 14:15:36 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA13195 for ports-outgoing; Wed, 4 Jun 1997 14:15:36 -0700 (PDT) Received: from time.cdrom.com (root@time.cdrom.com [204.216.27.226]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA13188 for ; Wed, 4 Jun 1997 14:15:33 -0700 (PDT) Received: from time.cdrom.com (jkh@localhost [127.0.0.1]) by time.cdrom.com (8.8.5/8.6.9) with ESMTP id OAA08515; Wed, 4 Jun 1997 14:15:16 -0700 (PDT) To: Tim Pushor cc: ports@FreeBSD.ORG Subject: Re: Ahhhh More pkg_add problems In-reply-to: Your message of "Wed, 04 Jun 1997 07:55:02 -0000." Date: Wed, 04 Jun 1997 14:15:16 -0700 Message-ID: <8512.865458916@time.cdrom.com> From: "Jordan K. Hubbard" Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk > I think I need to clarify something. I am not using the pkg_create program > to create packages. I have been simply creating the files +CONTENTS, etc > etc in the root directory of my package directory, then tgzipping the > structure up. I don't know if this will make a difference or not.. Well, however you're creating them, you still need to follow the same rules either way. :-) Jordan From owner-freebsd-ports Wed Jun 4 16:27:25 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA01218 for ports-outgoing; Wed, 4 Jun 1997 16:27:25 -0700 (PDT) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA01209; Wed, 4 Jun 1997 16:27:23 -0700 (PDT) Received: (from asami@localhost) by vader.cs.berkeley.edu (8.8.5/8.7.3) id QAA01506; Wed, 4 Jun 1997 16:27:15 -0700 (PDT) Date: Wed, 4 Jun 1997 16:27:15 -0700 (PDT) Message-Id: <199706042327.QAA01506@vader.cs.berkeley.edu> To: scott@statsci.com CC: freebsd-ports@FreeBSD.ORG In-reply-to: (message from Scott Blachowicz on Wed, 04 Jun 1997 08:54:05 -0700) Subject: Re: ports/3647 From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * > -# $Id: Makefile,v 1.3 1997/05/21 04:20:13 scott Exp $ * > +# $Id$ * * Is there a standard way to maintain my copy of the port in RCS/CVS? Just turn * off keyword expansion in my files ('cvs admin -ko' or whatever)? If you are talking about a new port, yes that would be fine. No idea about old (upgrades to alreday committed ports). Satoshi From owner-freebsd-ports Wed Jun 4 16:30:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA01826 for ports-outgoing; Wed, 4 Jun 1997 16:30:06 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA01793; Wed, 4 Jun 1997 16:30:02 -0700 (PDT) Date: Wed, 4 Jun 1997 16:30:02 -0700 (PDT) Message-Id: <199706042330.QAA01793@hub.freebsd.org> To: freebsd-ports Cc: From: asami@cs.berkeley.edu (Satoshi Asami) Subject: Re: ports/3357: I make "pari-GP" ports Reply-To: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3357; it has been noted by GNATS. From: asami@cs.berkeley.edu (Satoshi Asami) To: yoshiaki@kt.rim.or.jp Cc: freebsd-gnats-submit@freebsd.org Subject: Re: ports/3357: I make "pari-GP" ports Date: Wed, 4 Jun 1997 16:25:53 -0700 (PDT) By the way, the reason why I asked is because NO_PACKAGE is no longer a boolean. You need a reason there. :) * It can be freely copied and spread, as long as no files are modified, and * that the whole package (source and manual), including this README file * is included. * If we want to distribute binary package, we must distribute both * binary packages and original packages. Hmm. We do include both the original distfile and the package on any medium that we distribute. I don't think it would be a problem, unless the above means that they have to be in the exact same file (but then you can't distribute it in extracted form either, which doesn't make any sense). Why don't you put a notice (pkg/MESSAGE would be fine) that the authors request that the distfiles always accompany the package? You can also say "the distfile can be found at /cdrom/ports/distfiles or ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/ somewhere very close to this package". Satoshi From owner-freebsd-ports Wed Jun 4 16:30:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA01858 for ports-outgoing; Wed, 4 Jun 1997 16:30:11 -0700 (PDT) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA01823; Wed, 4 Jun 1997 16:30:04 -0700 (PDT) Received: (from asami@localhost) by vader.cs.berkeley.edu (8.8.5/8.7.3) id QAA01544; Wed, 4 Jun 1997 16:30:00 -0700 (PDT) Date: Wed, 4 Jun 1997 16:30:00 -0700 (PDT) Message-Id: <199706042330.QAA01544@vader.cs.berkeley.edu> To: patl@Phoenix.Volant.ORG CC: freebsd-ports@freebsd.org In-reply-to: Subject: Re: ispell port requires EMACS?! From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * Don't forget to ensure that the install removes any OLD ispell.el file... You mean ispell.elc? Satoshi From owner-freebsd-ports Wed Jun 4 16:44:27 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA04356 for ports-outgoing; Wed, 4 Jun 1997 16:44:27 -0700 (PDT) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA04348; Wed, 4 Jun 1997 16:44:24 -0700 (PDT) Received: (from asami@localhost) by vader.cs.berkeley.edu (8.8.5/8.7.3) id QAA01602; Wed, 4 Jun 1997 16:44:03 -0700 (PDT) Date: Wed, 4 Jun 1997 16:44:03 -0700 (PDT) Message-Id: <199706042344.QAA01602@vader.cs.berkeley.edu> To: ssigala@globalnet.it CC: freebsd-ports@FreeBSD.ORG In-reply-to: (ssigala@globalnet.it) Subject: Re: ports/3457 From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * > As for cutils, please submit it as a "diff -ur". (Please read the * > handbook's section on port upgrades.) * > * * Ok, Thanks. Here is the patch. * -# $Id: Makefile,v 1.5 1997/04/30 03:17:57 asami Exp $ * +# $Id: Makefile,v 1.4 1996/12/24 11:11:43 max Exp $ This is why we would like to see patches. You are working on an old version. ;) Satoshi From owner-freebsd-ports Wed Jun 4 17:09:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA09642 for ports-outgoing; Wed, 4 Jun 1997 17:09:05 -0700 (PDT) Received: from gargoyle.bazzle.com (gargoyle.bazzle.com [206.103.246.190]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA09210; Wed, 4 Jun 1997 17:07:41 -0700 (PDT) Received: from localhost (ejc@localhost) by gargoyle.bazzle.com (8.8.5/8.6.12) with SMTP id UAA07774; Wed, 4 Jun 1997 20:07:30 -0400 (EDT) Date: Wed, 4 Jun 1997 20:07:29 -0400 (EDT) From: "Eric J. Chet" To: Satoshi Asami cc: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3619 In-Reply-To: <199706040600.XAA07902@freefall.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Tue, 3 Jun 1997, Satoshi Asami wrote: > Synopsis: new CORBA port omniORB from Olivetti & Oracle Research > > The docfiles are supposed to be in the directory "share/doc/", not > "share//doc" (unless, of course, the port requires some files > to be in "share/" anyway). > > By the way, I tried to compile this with -O2 optimization (just change > "=" to "+=" in the first CFLAGS line in patches/patch-aa here), but it > fails: > > === > ===> src/tool/omniidl2/omniORB2_be > Warning: Object directory not changed from original /ccd/tmp/work/omniORB/work/omniORB_2.2.0/src/tool/omniidl2/omniORB2_be > c++ -O2 -pipe -fhandle-exceptions -I../include -I. -c o2be_array.cc -o o2be_array.o > {standard input}: Assembler messages: > {standard input}:6773: Error: Local symbol L6752 never defined. > {standard input}:6773: Error: Local symbol L6753 never defined. > {standard input}:6773: Error: Local symbol L6754 never defined. > {standard input}:6773: Fatal error:3 errors, 0 warnings, no object file generated. > > *** Error code 1 > > Stop. > === > > Does anyone know if this is just a bug in our C++ compiler? I really > hate the idea of distributing a package in excess of 1MB compiled > without any optimization. > Hello Exception handling is really poor in GNU g++ on any platform. G++ 2.7.2 can't handle exception handling with the optimizer on, we will have to wait for version 2.8.x to turn it on. Thanks for cleaning up and commiting the ports, it was my first attempt at a port. Thanks, Eric From owner-freebsd-ports Wed Jun 4 17:10:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA10178 for ports-outgoing; Wed, 4 Jun 1997 17:10:08 -0700 (PDT) Received: from centaur.orion.ab.ca (orion.ab.ca [207.245.27.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA10125 for ; Wed, 4 Jun 1997 17:10:02 -0700 (PDT) Received: from localhost (timp@localhost) by centaur.orion.ab.ca (8.8.5/8.6.12) with SMTP id RAA24640; Wed, 4 Jun 1997 17:05:08 GMT Date: Wed, 4 Jun 1997 17:05:08 +0000 () From: Tim Pushor To: "Jordan K. Hubbard" cc: ports@FreeBSD.ORG Subject: Re: Ahhhh More pkg_add problems In-Reply-To: <8512.865458916@time.cdrom.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, 4 Jun 1997, Jordan K. Hubbard wrote: > > I think I need to clarify something. I am not using the pkg_create program > > to create packages. I have been simply creating the files +CONTENTS, etc > > etc in the root directory of my package directory, then tgzipping the > > structure up. I don't know if this will make a difference or not.. > > Well, however you're creating them, you still need to follow the same > rules either way. :-) True, but I have noticed that using pkg_create does some things a little different and wanted to make sure you knew I was not using it. I think I have figured out everything I need. Thanks for all your help. Tim --- Tim Pushor Orion Technologies Inc. Technical Director Phone: (403) 284-0042 timp@orion.ab.ca support@orion.ab.ca http://www.orion.ab.ca/~timp http://www.orion.ab.ca "communication leadership through innovation" From owner-freebsd-ports Wed Jun 4 18:30:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA25537 for ports-outgoing; Wed, 4 Jun 1997 18:30:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA25531; Wed, 4 Jun 1997 18:30:03 -0700 (PDT) Resent-Date: Wed, 4 Jun 1997 18:30:03 -0700 (PDT) Resent-Message-Id: <199706050130.SAA25531@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, jonny@mailhost.coppe.ufrj.br Received: from gaia.coppe.ufrj.br (root@[146.164.5.200]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA25335 for ; Wed, 4 Jun 1997 18:28:11 -0700 (PDT) Received: from zeus.coppe.ufrj.br (jonny@Jonny.coppe.ufrj.br [146.164.63.6]) by gaia.coppe.ufrj.br (8.8.5/8.7.3) with ESMTP id WAA11300 for ; Wed, 4 Jun 1997 22:28:08 -0300 (EST) Received: (from jonny@localhost) by zeus.coppe.ufrj.br (8.8.5/8.8.5) id WAA19132; Wed, 4 Jun 1997 22:28:10 -0300 (EST) Message-Id: <199706050128.WAA19132@zeus.coppe.ufrj.br> Date: Wed, 4 Jun 1997 22:28:10 -0300 (EST) From: Joao Carlos Mendes Luis Reply-To: jonny@mailhost.coppe.ufrj.br To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3783: New port: skill/snice Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3783 >Category: ports >Synopsis: New port: skill/snice >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Wed Jun 4 18:30:01 PDT 1997 >Last-Modified: >Originator: Joao Carlos Mendes Luis >Organization: Coppe/UFRJ >Release: FreeBSD 2.2-STABLE i386 >Environment: >Description: I've uploaded skill-port.tgz to the FreeBSD incoming directory. It's a kill(1)/renice(8) utility, with extra features. BTW: There's a comment on the Makefile: # Bugs: skill.1 and snice.1 are hard links. When compressed they # are changed to independent files. I'd like to change this... If you know how to solve this problem, please make it so... >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Wed Jun 4 18:46:54 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA26332 for ports-outgoing; Wed, 4 Jun 1997 18:46:54 -0700 (PDT) Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id SAA26326 for ; Wed, 4 Jun 1997 18:46:52 -0700 (PDT) From: patl@phoenix.volant.org Received: from asimov.phoenix.volant.org [205.179.79.65] by phoenix.volant.org with smtp (Exim 1.59 #1) id 0wZRdc-000766-00; Wed, 4 Jun 1997 18:46:52 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id SAA22525; Wed, 4 Jun 1997 18:46:42 -0700 Date: Wed, 4 Jun 1997 18:46:41 -0700 (PDT) Reply-To: patl@phoenix.volant.org Subject: Re: ispell port requires EMACS?! To: freebsd-ports@freebsd.org In-Reply-To: <199706042330.QAA01544@vader.cs.berkeley.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk > * Don't forget to ensure that the install removes any OLD ispell.el > file... > > You mean ispell.elc? Aaarrrgggg. Yes, of course. That's what happens when I whip out a message without time to proofread it... Actually, a nearly ideal solution would be to remove the old .elc file and then try to build a new one; but ignore any error on the assumption that errors are caused by not having emacs installed. -Pat From owner-freebsd-ports Wed Jun 4 19:00:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA27104 for ports-outgoing; Wed, 4 Jun 1997 19:00:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA27079; Wed, 4 Jun 1997 19:00:02 -0700 (PDT) Resent-Date: Wed, 4 Jun 1997 19:00:02 -0700 (PDT) Resent-Message-Id: <199706050200.TAA27079@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, andy@icc.surw.chel.su Received: from rich.chel.su (root@mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA26953 for ; Wed, 4 Jun 1997 18:57:52 -0700 (PDT) Received: from icc.surw.chel.su (surw.chel.su [195.54.2.162]) by rich.chel.su (8.7.2/Murphy) with ESMTP id IAA27434 for ; Thu, 5 Jun 1997 08:02:43 +0600 (UDT) Received: (from andy@localhost) by icc.surw.chel.su (8.8.4/8.8.4) id FAA22795; Thu, 5 Jun 1997 05:36:28 GMT Message-Id: <199706050536.FAA22795@icc.surw.chel.su> Date: Thu, 5 Jun 1997 05:36:28 GMT From: Andrey Zakhvatov Reply-To: andy@icc.surw.chel.su To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3784: New port: cyrproxy-1.4.1 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3784 >Category: ports >Synopsis: New port: cyrproxy-1.4.1 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Wed Jun 4 19:00:00 PDT 1997 >Last-Modified: >Originator: Andrey Zakhvatov >Organization: >Release: FreeBSD 2.1-STABLE i386 >Environment: >Description: This is port of cyrillic proxy transcoder. Look at ftp://ftp.freebsd.org/pub/FreeBSD/incoming/cyrproxy-1.4.1.tar.gz >How-To-Repeat: >Fix: Please, check and commit. >Audit-Trail: >Unformatted: From owner-freebsd-ports Wed Jun 4 22:00:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA25654 for ports-outgoing; Wed, 4 Jun 1997 22:00:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA25643; Wed, 4 Jun 1997 22:00:01 -0700 (PDT) Date: Wed, 4 Jun 1997 22:00:01 -0700 (PDT) Message-Id: <199706050500.WAA25643@hub.freebsd.org> To: freebsd-ports Cc: From: Satoshi Asami Subject: Re: ports/3318: New port: jigsaw (Java-based HTTP server) Reply-To: Satoshi Asami Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3318; it has been noted by GNATS. From: Satoshi Asami To: freebsd-gnats-submit@freebsd.org, bjn@visi.com Cc: Subject: Re: ports/3318: New port: jigsaw (Java-based HTTP server) Date: Wed, 04 Jun 1997 21:54:27 -0700 Thanks, but the JDK port has since been changed to use FreeBSD's native version. Can you update the port accordingly? From owner-freebsd-ports Wed Jun 4 22:12:56 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA25923 for ports-outgoing; Wed, 4 Jun 1997 22:12:56 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA25917; Wed, 4 Jun 1997 22:12:50 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id WAA09701; Wed, 4 Jun 1997 22:12:42 -0700 (PDT) Date: Wed, 4 Jun 1997 22:12:42 -0700 (PDT) Message-Id: <199706050512.WAA09701@freefall.freebsd.org> To: asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, ache@FreeBSD.ORG Subject: Re: ports/3256 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: ncftp-2.4.2 in packages-2.2 was not linked readline Responsible-Changed-From-To: freebsd-ports->ache Responsible-Changed-By: asami Responsible-Changed-When: Wed Jun 4 22:11:47 PDT 1997 Responsible-Changed-Why: Well, now both packages-2.2.2 and packages-current are linked without readline. What do you think, Mr. Maintainer? From owner-freebsd-ports Wed Jun 4 23:00:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA27231 for ports-outgoing; Wed, 4 Jun 1997 23:00:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA27216; Wed, 4 Jun 1997 23:00:02 -0700 (PDT) Resent-Date: Wed, 4 Jun 1997 23:00:02 -0700 (PDT) Resent-Message-Id: <199706050600.XAA27216@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, Nakai@Mlab.t.u-tokyo.ac.jp Received: (from nobody@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA27022; Wed, 4 Jun 1997 22:55:27 -0700 (PDT) Message-Id: <199706050555.WAA27022@hub.freebsd.org> Date: Wed, 4 Jun 1997 22:55:27 -0700 (PDT) From: Nakai@Mlab.t.u-tokyo.ac.jp To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: ports/3785: Fixed port: ines-0.6 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3785 >Category: ports >Synopsis: Fixed port: ines-0.6 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Wed Jun 4 23:00:01 PDT 1997 >Last-Modified: >Originator: Yukihiro Nakai >Organization: >Release: 3.0-current >Environment: >Description: I have fixed ines port to follow the latest version. Yukihiro Nakai --------- diff -ruN ines.orig/Makefile ines/Makefile --- ines.orig/Makefile Thu Jun 5 14:46:19 1997 +++ ines/Makefile Thu Jun 5 14:51:05 1997 @@ -1,5 +1,5 @@ # New ports collection makefile for: ines -# Version required: 0.5 +# Version required: 0.6 # Date created: 02 November 1996 # Whom: Yukihiro Nakai # @@ -7,10 +7,10 @@ # DISTNAME= NES -PKGNAME= ines-0.5 +PKGNAME= ines-0.6 CATEGORIES= emulators -MASTER_SITES= ${MASTER_SITE_LOCAL} -DISTFILES= iNES05-FreeBSD-80x86-bin.tar.Z +MASTER_SITES= http://freeflight.com/fms/iNES/ +DISTFILES= iNES06-FreeBSD-80x86-bin.tar.Z MAINTAINER= Nakai@Mlab.t.u-tokyo.ac.jp @@ -19,10 +19,12 @@ do-build: do-install: - ${INSTALL_PROGRAM} ${WRKSRC}/ines ${PREFIX}/bin/ines - ${INSTALL_PROGRAM} ${WRKSRC}/dasm ${PREFIX}/bin/dasm + ${INSTALL_PROGRAM} ${WRKSRC}/ines ${PREFIX}/bin + ${INSTALL_PROGRAM} ${WRKSRC}/ines-debug ${PREFIX}/bin @${MKDIR} ${PREFIX}/share/ines @${INSTALL_DATA} ${WRKSRC}/iNES.doc ${PREFIX}/share/ines + @${INSTALL_DATA} ${WRKSRC}/headers.tgz ${PREFIX}/share/ines + @${INSTALL_DATA} ${WRKSRC}/CART.* ${PREFIX}/share/ines .include diff -ruN ines.orig/files/md5 ines/files/md5 --- ines.orig/files/md5 Thu Jun 5 14:46:19 1997 +++ ines/files/md5 Mon May 26 23:09:54 1997 @@ -1 +1 @@ -MD5 (iNES05-FreeBSD-80x86-bin.tar.Z) = 7485aded2f74f841122587a3c5ef72c4 +MD5 (iNES06-FreeBSD-80x86-bin.tar.Z) = 2ca0b8529d34457bb043f6373b423e15 diff -ruN ines.orig/pkg/PLIST ines/pkg/PLIST --- ines.orig/pkg/PLIST Thu Jun 5 14:46:20 1997 +++ ines/pkg/PLIST Mon May 26 23:16:21 1997 @@ -1,3 +1,6 @@ bin/ines -bin/dasm +bin/ines-debug share/ines/iNES.doc +share/ines/headers.tgz +share/ines/CART.ASM +share/ines/CART.NES >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Wed Jun 4 23:10:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA27533 for ports-outgoing; Wed, 4 Jun 1997 23:10:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA27517; Wed, 4 Jun 1997 23:10:01 -0700 (PDT) Resent-Date: Wed, 4 Jun 1997 23:10:01 -0700 (PDT) Resent-Message-Id: <199706050610.XAA27517@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, Nakai@Mlab.t.u-tokyo.ac.jp Received: (from nobody@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA27474; Wed, 4 Jun 1997 23:08:57 -0700 (PDT) Message-Id: <199706050608.XAA27474@hub.freebsd.org> Date: Wed, 4 Jun 1997 23:08:57 -0700 (PDT) From: Nakai@Mlab.t.u-tokyo.ac.jp To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: ports/3786: Fixed port: xbakuzan -> xshodo Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3786 >Category: ports >Synopsis: Fixed port: xbakuzan -> xshodo >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Wed Jun 4 23:10:01 PDT 1997 >Last-Modified: >Originator: Yukihiro Nakai >Organization: >Release: 3.0-current >Environment: >Description: I have fixed the xbakuzan port to follow its latest version. The original author change name from xbakuzan to xshodo, so please change port name also. Removed file: patches/patch-aa Yukihiro Nakai -------------- diff -ruN xbakuzan/Makefile xshodo/Makefile --- xbakuzan/Makefile Thu Jun 5 15:00:54 1997 +++ xshodo/Makefile Thu Jun 5 15:02:39 1997 @@ -1,26 +1,19 @@ -# New ports collection makefile for: xbakuzan -# Version required: 1.0 +# New ports collection makefile for: xshodo +# Version required: 2.0 # Date created: 11 October 1996 # Whom: Yukihiro Nakai # # $Id: Makefile,v 1.3 1997/01/09 06:23:51 asami Exp $ # -DISTNAME= xbakuzan -PKGNAME= jp-xbakuzan-1.0 +DISTNAME= xshodo +PKGNAME= jp-xshodo-2.0 CATEGORIES= x11 MASTER_SITES= ftp://cclub.tutcc.tut.ac.jp/pub/xwin/ +DISTFILES= xshodo2.0.tar.gz MAINTAINER= Nakai@Mlab.t.u-tokyo.ac.jp -ALL_TARGET= xbakuzan -USE_X11= yes - -do-install: - @${MKDIR} ${PREFIX}/bin - ${INSTALL_PROGRAM} ${WRKSRC}/xbakuzan ${PREFIX}/bin - @${MKDIR} ${PREFIX}/lib/X11/xbakuzan - ${INSTALL_DATA} ${WRKSRC}/sakana.xbm ${PREFIX}/lib/X11/xbakuzan - ${INSTALL_DATA} ${WRKSRC}/xbakuzan.doc ${PREFIX}/lib/X11/xbakuzan +USE_IMAKE= yes .include diff -ruN xbakuzan/files/md5 xshodo/files/md5 --- xbakuzan/files/md5 Thu Jun 5 15:00:54 1997 +++ xshodo/files/md5 Wed May 28 23:31:31 1997 @@ -1 +1 @@ -MD5 (xbakuzan.tar.gz) = 5a629dd1367691d29decf5ef5bdf8bb4 +MD5 (xshodo2.0.tar.gz) = 7658b4dc81caa59a6f536de40a3e3abc diff -ruN xbakuzan/patches/patch-aa xshodo/patches/patch-aa --- xbakuzan/patches/patch-aa Thu Jun 5 15:00:55 1997 +++ xshodo/patches/patch-aa Thu Jan 1 09:00:00 1970 @@ -1,14 +0,0 @@ -*** Makefile.org Fri Oct 11 09:55:56 1996 ---- Makefile Fri Oct 11 09:56:23 1996 -*************** -*** 1,4 **** - CC = gcc - - xbakuzan : xbakuzan.c -! $(CC) xbakuzan.c -o xbakuzan -lX11 ---- 1,5 ---- - CC = gcc - - xbakuzan : xbakuzan.c -! $(CC) xbakuzan.c -o xbakuzan -lX11 \ -! -I/usr/X11R6/include -L/usr/X11R6/lib diff -ruN xbakuzan/pkg/DESCR xshodo/pkg/DESCR --- xbakuzan/pkg/DESCR Thu Jun 5 15:00:55 1997 +++ xshodo/pkg/DESCR Sun May 25 21:52:33 1997 @@ -1,4 +1,4 @@ -xbakuzan, a tool for the Japanese traditional writing called Shodo. +xshodo, a tool for the Japanese traditional writing called Shodo. You can write a Japanese or Chinese letter under the traditional method with traditional pen simulator. Additionally, you can write some traditional diff -ruN xbakuzan/pkg/PLIST xshodo/pkg/PLIST --- xbakuzan/pkg/PLIST Thu Jun 5 15:00:55 1997 +++ xshodo/pkg/PLIST Wed May 28 23:32:26 1997 @@ -1,3 +1,2 @@ -bin/xbakuzan -lib/X11/xbakuzan/sakana.xbm -lib/X11/xbakuzan/xbakuzan.doc +bin/xshodo +man/man1/xshodo.1.gz >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Wed Jun 4 23:50:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA28896 for ports-outgoing; Wed, 4 Jun 1997 23:50:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id XAA28886; Wed, 4 Jun 1997 23:50:01 -0700 (PDT) Resent-Date: Wed, 4 Jun 1997 23:50:01 -0700 (PDT) Resent-Message-Id: <199706050650.XAA28886@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, obrien@NUXI.com Received: from relay.nuxi.com (nuxi.ucdavis.edu [128.120.175.23]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id XAA28712 for ; Wed, 4 Jun 1997 23:45:11 -0700 (PDT) Received: from dragon.nuxi.com (dav1-24.calweb.com [207.211.82.24]) by relay.nuxi.com (8.8.5/8.6.12) with ESMTP id XAA13028 for ; Wed, 4 Jun 1997 23:48:26 -0700 (PDT) Received: (from obrien@localhost) by dragon.nuxi.com (8.8.5/8.7.3) id GAA06787; Thu, 5 Jun 1997 06:45:06 GMT Message-Id: <199706050645.GAA06787@dragon.nuxi.com> Date: Thu, 5 Jun 1997 06:45:06 GMT From: "David O'Brien" Reply-To: obrien@NUXI.com To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3787: ghostscript-3.53 has bad PLIST Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3787 >Category: ports >Synopsis: ghostscript-3.53 has bad PLIST >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Jun 4 23:50:00 PDT 1997 >Last-Modified: >Originator: David O'Brien >Organization: The FreeBSD Project. >Release: FreeBSD 2.2-STABLE i386 >Environment: ghostscript-3.53 from packages-2.2.2/All >Description: pkg_delete ghostscript-3.53 produces errors: bash# pkg_delete ghostscript-3.53 Attempting to delete directory `/usr/local/lib/ghostscript' as a file This packing list is incorrect - ignoring delete request. bash# du /usr/local/lib/ghostscript 286 /usr/local/lib/ghostscript/doc 180 /usr/local/lib/ghostscript/examples 3 /usr/local/lib/ghostscript/kanji 4983 /usr/local/lib/ghostscript/fonts 763 /usr/local/lib/ghostscript/3.53/doc 187 /usr/local/lib/ghostscript/3.53/examples 1496 /usr/local/lib/ghostscript/3.53 7200 /usr/local/lib/ghostscript >How-To-Repeat: pkg_add ghostscript-3.53.tgz pkg_delete ghostscript-3.53 >Fix: make PREFIX=/tmp/gs install find /tmp/gs -type f -print to build correct PLIST >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 00:20:54 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA00175 for ports-outgoing; Thu, 5 Jun 1997 00:20:54 -0700 (PDT) Received: from time.cdrom.com (root@time.cdrom.com [204.216.27.226]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA00166; Thu, 5 Jun 1997 00:20:50 -0700 (PDT) Received: from time.cdrom.com (jkh@localhost [127.0.0.1]) by time.cdrom.com (8.8.5/8.6.9) with ESMTP id AAA12183; Thu, 5 Jun 1997 00:20:57 -0700 (PDT) To: "Julian H. Stacey" cc: committers@freebsd.org, ports@freebsd.org Subject: Re: ports/comms/hylafax In-reply-to: Your message of "Wed, 04 Jun 1997 18:21:10 +0200." <199706041621.SAA02899@desk.jhs.no_domain> Date: Thu, 05 Jun 1997 00:20:57 -0700 Message-ID: <12179.865495257@time.cdrom.com> From: "Jordan K. Hubbard" Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk OK, I'll bell this cat.. First, there were too many mailing lists on the command line, especially when committers is a functional superset, so I've trimmed it in the interests of not mail-bombing people with multiple copies. > Would you please consider intructing asami@cs.berkeley.edu (Satoshi Asami) > to effect some or all (at your discretion, naturaly) : > - To restore from CVS Attic ports/comms/hylafax/ > - To re-commit the new port as ports/comms/hylafax4/ > - To consult & comply with the long established mail list > in matters relating to FreeBSD Hylafax. First off, and just to clear this up in order to avoid future misunderstanding, we don't really "instruct" people to do things so much as we make strong suggestions, so it's not appropriate to ask core to take such direct action, and certainly not in the first round before any serious degree of intractability has been demonstrated by the "offending party." Ask us to argue your case for you and that's something else, something quite different from asking us to hit somebody with the big stick. Second, Satoshi is also the portsmeister, and that means that the rest of us have agreed to abide by his decisions where ports are concerned. He does a hell of a lot of work on ports, in turn, and we consider that a more than reasonable trade. If he's got the responsibility then he should also have the "executive oversight", after all, and if anyone "instructs" anyone in matters of the ports collection then it's the other way around. Finally, with regard to the hylafax mailing list, I do hope that you would not consider that an adequate replacement for subscription to the ports mailing list by all the interested parties. Your hylafax mailing list was created to facilitate out-of-band communication on hylafax, much as the inn, pine, jdk and other such users have their own special mailing lists to discuss matters pertaining directly to their areas of interest. With close to 1000 ports, I would never expect to have to inform anyone but ports@freebsd.org in the event of ANY ports change. It is simply not realistic to expect someone mucking with the freebsd ports collection to keep track of potentially hundreds of mailing lists, and so the rule goes like this: If you want to change a given port, you must first clear it with the MAINTAINER and with ports@freebsd.org, should that be different from the MAINTAINER. No other communication is required or expected. If you were the listed maintainer for hylafax then yes, Satoshi should have sought your approval. By the same token, anyone unable to take action on a port due to time constraints should also expect to be either removed or overridden as the maintainer if a reasonable time has passed and they've now turned into a bottleneck. I do not know if this was true in your case, but just to note that maintainer status can certainly be revoked for anyone not able/willing to keep it up-to-date. In any case, even if there were an issue with this, it should have been handled as an entirely separate issue and so long as you were legitimately listed as the maintainer, you should have been consulted and given veto power over the move. Given all of this, I would _suggest_ that Satoshi do as requested and commit the new hylafax port under hylafax4 / resurrect the old, as suggested. If Satoshi wants to ignore this suggestion then that's still his right, however, as the portsmeister. That's what being the portsmeister means. Jordan From owner-freebsd-ports Thu Jun 5 01:31:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA03269 for ports-outgoing; Thu, 5 Jun 1997 01:31:44 -0700 (PDT) Received: from itojun.csl.sony.co.jp (itojun.csl.sony.co.jp [133.138.1.134]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA03255; Thu, 5 Jun 1997 01:31:36 -0700 (PDT) From: itojun@itojun.org Received: from localhost (itojun@localhost [127.0.0.1]) by itojun.csl.sony.co.jp (8.8.5/3.3W3) with ESMTP id RAA05398; Thu, 5 Jun 1997 17:31:04 +0900 (JST) To: Satoshi Asami Cc: freebsd-ports@freebsd.org Subject: Re: ports/3330 X-Template-Reply-To: itojun@itojun.org X-Template-Return-Receipt-To: itojun@itojun.org X-PGP-Fingerprint: F8 24 B4 2C 8C 98 57 FD 90 5F B4 60 79 54 16 E2 References: <199706040752.AAA01402@freefall.freebsd.org> In-reply-to: Satoshi Asami 's message of Wed, 4 Jun 1997 00:52:54 -0700 (PDT). <199706040752.AAA01402@freefall.freebsd.org> X-Mailer: comp (MHng project) version 1997/04/30 02:23:09, by Jun-ichiro Itoh MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Content-ID: Date: Thu, 05 Jun 1997 17:31:04 +0900 Message-ID: <5395.865499464@itojun.csl.sony.co.jp> Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk >Synopsis: hylafax port seems to be broken (partly) >State-Changed-From-To: open-feedback >State-Changed-By: asami >State-Changed-When: Wed Jun 4 00:52:18 PDT 1997 >State-Changed-Why: >hylafax has been upgraded to a new version, is this problem fixed? I believe so since this is me submitted the new version :-P itojun From owner-freebsd-ports Thu Jun 5 01:34:13 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA03386 for ports-outgoing; Thu, 5 Jun 1997 01:34:13 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA03380; Thu, 5 Jun 1997 01:34:05 -0700 (PDT) From: Satoshi Asami Received: (from asami@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id BAA10362; Thu, 5 Jun 1997 01:33:56 -0700 (PDT) Date: Thu, 5 Jun 1997 01:33:56 -0700 (PDT) Message-Id: <199706050833.BAA10362@freefall.freebsd.org> To: itojun@itojun.org, asami@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3330 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: hylafax port seems to be broken (partly) State-Changed-From-To: feedback-closed State-Changed-By: asami State-Changed-When: Thu Jun 5 01:33:29 PDT 1997 State-Changed-Why: Originator says problem is fixed. From owner-freebsd-ports Thu Jun 5 04:00:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA07854 for ports-outgoing; Thu, 5 Jun 1997 04:00:05 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA07837; Thu, 5 Jun 1997 04:00:02 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 04:00:02 -0700 (PDT) Resent-Message-Id: <199706051100.EAA07837@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, kiri@kiri.toba-cmt.ac.jp Received: from kiri.toba-cmt.ac.jp (kiri.toba-cmt.ac.jp [202.26.248.91]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA07749 for ; Thu, 5 Jun 1997 03:58:11 -0700 (PDT) Received: (from kiri@localhost) by kiri.toba-cmt.ac.jp (8.8.5/8.8.5) id UAA17514; Thu, 5 Jun 1997 20:02:00 +0900 (JST) Message-Id: <199706051102.UAA17514@kiri.toba-cmt.ac.jp> Date: Thu, 5 Jun 1997 20:02:00 +0900 (JST) From: Kazuhiko Kiriyama(System administrator) Reply-To: kiri@kiri.toba-cmt.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3788: Update port w3-2.2.26 (www/w3). Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3788 >Category: ports >Synopsis: Update port w3-2.2.26 (www/w3). >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 04:00:01 PDT 1997 >Last-Modified: >Originator: Kazuhiko Kiriyama >Organization: Toba National College of Maritime Technology. Department of Electronic Mechanical Engineering >Release: FreeBSD 2.2.2-RELEASE i386 >Environment: >Description: I've updated the port w3-2.2.26 (www/w3). Current modifications is (1) Change dir installation with install-info. Add,Delete and Update files are respecively [Add] : files/DEINSTALL.tmpl files/INSTALL.tmpl files/dot.emacs.tmpl files/user-install.tmpl [Delete] : files/dot.emacs files/user-install pkg/DEINSTALL pkg/INSTALL [Update] : Makefile files/md5 patches/patch-aa pkg/PLIST I put the diff from ports-current(www/w3) in "Fix:". >How-To-Repeat: >Fix: diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/Makefile ./Makefile --- ../../current/ports/www/w3/Makefile Sun Feb 16 17:23:26 1997 +++ ./Makefile Mon Jun 2 17:30:34 1997 @@ -3,36 +3,72 @@ # Date created: 31 December 1996 # Whom: MITA Yoshio # -# $Id: Makefile,v 1.3 1997/02/15 07:36:42 max Exp $ +# $Id: Makefile,v 1.2 1997/01/04 00:36:48 max Exp $ # DISTNAME= w3-2.2.26 -CATEGORIES= www -MASTER_SITES= ftp://ftp.cs.indiana.edu/pub/elisp/w3/ \ - ftp://ftp.iij.ad.jp/pub/network/WWW/w3/ +CATEGORIES?= www +MASTER_SITES= ftp://ftp.iij.ad.jp/pub/network/WWW/w3/ \ + ftp://ftp.cs.indiana.edu/pub/elisp/w3/ MAINTAINER= kiri@kiri.toba-cmt.ac.jp -BUILD_DEPENDS= emacs:${PORTSDIR}/editors/emacs -RUN_DEPENDS= emacs:${PORTSDIR}/editors/emacs +BUILD_DEPENDS?= emacs:${PORTSDIR}/editors/emacs +RUN_DEPENDS?= emacs:${PORTSDIR}/editors/emacs WRKSRC= ${WRKDIR}/w3 - -DOCDIR= ${PREFIX}/share/doc/w3 +MAKE_ENV+= EMACSCMD=${EMACSCMD} ELISPDIR=${ELISPDIR} \ + MKDIR="${MKDIR}" CP=${CP} \ + INFODIR=${INFODIR} \ + INSTALL_DATA="${INSTALL_DATA}" + +VERSION= 2.2.26 +EMACSCMD?= emacs +PORTSDOCDIR= ${PREFIX}/share/doc/w3 SAMPLEDIR= ${PREFIX}/share/examples/w3 +ELISPDIR?= ${PREFIX}/share/emacs/site-lisp +INFODIR= ${PREFIX}/info +ADDIR= ${X11BASE}/lib/X11/app-defaults +DIRSECTION= The Emacs editor and associated tools +INFOFILE= w3.info + +post-build: +.for f in DEINSTALL INSTALL dot.emacs user-install + @${SED} -e "s,%VERSION%,${VERSION},g" \ + -e "s,%PREFIX%,${PREFIX},g" \ + -e "s,%INFODIR%,${INFODIR},g" \ + -e "s,%ELISPDIR%,${ELISPDIR},g" \ + -e "s,%INFOFILE%,${INFOFILE},g" \ + -e "s,%ADDIR%,${ADDIR},g" \ + -e "s,%TOUCH%,${TOUCH},g" \ + -e "s,%MKDIR%,${MKDIR},g" \ + -e "s,%SAMPLEDIR%,${SAMPLEDIR},g" \ + -e "s,%DIRSECTION%,${DIRSECTION},g" \ + < ${FILESDIR}/${f}.tmpl > ${FILESDIR}/${f} +.endfor + @${CP} ${FILESDIR}/DEINSTALL ${FILESDIR}/INSTALL ${PKGDIR} post-install: .if !defined(NOPORTDOCS) - @${MKDIR} ${DOCDIR} + @${MKDIR} ${PORTSDOCDIR} @${MKDIR} ${SAMPLEDIR} .for f in dot.emacs dot.mosaic-hotlist-default @${INSTALL_DATA} ${FILESDIR}/${f} ${SAMPLEDIR} .endfor @${INSTALL_SCRIPT} ${FILESDIR}/user-install ${SAMPLEDIR} .for f in W3.ad clean-cache Makefile w3.txi - @${INSTALL_DATA} ${WRKSRC}/${f} ${DOCDIR} + @${INSTALL_DATA} ${WRKSRC}/${f} ${PORTSDOCDIR} .endfor .endif - @${SETENV} PKG_PREFIX=${PREFIX} /bin/sh ${PKGDIR}/INSTALL ${PKGNAME} POST-INSTALL + @${SETENV} MKDIR="${MKDIR}" TOUCH=${TOUCH} \ + INFODIR=${INFODIR} INFOFILE=${INFOFILE} \ + ELISPDIR=${ELISPDIR} ADDIR=${ADDIR} \ + DIRSECTION="${DIRSECTION}" \ + /bin/sh ${PKGDIR}/INSTALL ${PKGNAME} POST-INSTALL + +pre-clean: + @${RM} -f ${FILESDIR}/DEINSTALL ${FILESDIR}/INSTALL \ + ${FILESDIR}/dot.emacs ${FILESDIR}/user-install \ + ${PKGDIR}/DEINSTALL ${PKGDIR}/INSTALL .include diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/files/DEINSTALL.tmpl ./files/DEINSTALL.tmpl --- ../../current/ports/www/w3/files/DEINSTALL.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/DEINSTALL.tmpl Sat May 31 21:18:05 1997 @@ -0,0 +1,31 @@ +#!/bin/sh + +infodir=${INFODIR:-%INFODIR%} +infofile=${INFOFILE:-%INFOFILE%} +elispdir=${ELISPDIR:-%ELISPDIR%} +addir=${ADDIR:-%ADDIR%} + +if [ "X$2" = X"DEINSTALL" ]; then + echo "Deleting \"w3\" entry from ${infodir}/dir" + install-info --delete ${infodir}/${infofile} ${infodir}/dir + OptionStart=";;; Emacs-w3 configuration options" + OptionEnd=";;; End of Emacs-w3 configuration options" + if [ "`grep \"^${OptionStart}\" ${elispdir}/site-start.el`" ]; then + echo "Deleting \"w3\" entry from ${elispdir}/site-start.el" + sed -e "/^${OptionStart}/,/^${OptionEnd}/d"\ + ${elispdir}/site-start.el \ + > ${elispdir}/site-start.el.bak + mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el + fi + OptionStart="!!! Emacs-w3 configuration options" + OptionEnd="!!! End of Emacs-w3 configuration options" + if [ "`grep \"^${OptionStart}\" ${addir}/Emacs`" ]; then + echo "Deleting \"w3\" entry from ${addir}/Emacs" + sed -e 's/^![ ]*\(Emacs\*w3-.*\)$/&/' \ + -e "/^${OptionStart}/,/^${OptionEnd}/d" \ + ${addir}/Emacs > ${addir}/Emacs.bak + mv ${addir}/Emacs.bak ${addir}/Emacs + fi +else + exit 0 +fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/files/INSTALL.tmpl ./files/INSTALL.tmpl --- ../../current/ports/www/w3/files/INSTALL.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/INSTALL.tmpl Sat May 31 21:30:55 1997 @@ -0,0 +1,112 @@ +#!/bin/sh + +TOUCH=${TOUCH:-%TOUCH%} +MKDIR=${MKDIR:-"%MKDIR%"} + +infodir=${INFODIR:-%INFODIR%} +infofile=${INFOFILE:-%INFOFILE%} +elispdir=${ELISPDIR:-%ELISPDIR%} +addir=${ADDIR:-%ADDIR%} + +dirsection=${DIRSECTION:-%DIRSECTION%} + +OptionStart="Emacs-w3 configuration options" +OptionEnd="End of Emacs-w3 configuration options" + +if [ "X$2" = X"POST-INSTALL" ]; then + if [ ! -f ${elispdir}/site-start.el ]; then + ${TOUCH} ${elispdir}/site-start.el + fi + ${MKDIR} ${addir} + if [ ! -f ${addir}/Emacs ]; then + ${TOUCH} ${addir}/Emacs + fi + if [ ! "`grep \"START-INFO-DIR-ENTRY\" ${infodir}/${infofile}`" ]; then + echo "INFO-DIR-SECTION ${dirsection}" \ + >> ${infodir}/${infofile} + echo "START-INFO-DIR-ENTRY" >> ${infodir}/${infofile} + echo "* w3: (`basename ${infofile} .info`). WWW browser." \ + >> ${infodir}/${infofile} + echo "END-INFO-DIR-ENTRY" >> ${infodir}/${infofile} + fi + echo "Adding \"w3\" entry to ${infodir}/dir" + install-info ${infodir}/${infofile} ${infodir}/dir + sed -e "/^;;; ${OptionStart}/,/^;;; ${OptionEnd}/d" \ + ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak + mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el + echo "Adding \"w3\" entry to ${elispdir}/site-start.el" + echo ";;; ${OptionStart}" \ + >> ${elispdir}/site-start.el + echo "(setq load-path " >> ${elispdir}/site-start.el + echo " (cons (expand-file-name " >> ${elispdir}/site-start.el + echo " \"${elispdir}/w3\") load-path))" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-preview-this-buffer \"w3\" \"WWW Previewer\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-follow-url-at-point" \ + >> ${elispdir}/site-start.el + echo " \"w3\" \"Find document at pt\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3 \"w3\" \"WWW Browser\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-open-local" >> ${elispdir}/site-start.el + echo " \"w3\" \"Open local file for WWW browsing\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-fetch" >> ${elispdir}/site-start.el + echo " \"w3\" \"Open remote file for WWW browsing\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-use-hotlist" >> ${elispdir}/site-start.el + echo " \"w3\" \"Use shortcuts to view WWW docs\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-show-hotlist" >> ${elispdir}/site-start.el + echo " \"w3\" \"Use shortcuts to view WWW docs\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-follow-link" >> ${elispdir}/site-start.el + echo " \"w3\" \"Follow a hypertext link.\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'w3-batch-fetch" >> ${elispdir}/site-start.el + echo " \"w3\" \"Batch retrieval of URLs\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'url-get-url-at-point" >> ${elispdir}/site-start.el + echo " \"url\" \"Find the url under the cursor\" nil)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'url-file-attributes" \ + >> ${elispdir}/site-start.el + echo " \"url\" \"File attributes of a URL\" nil)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'url-popup-info" >> ${elispdir}/site-start.el + echo " \"url\" \"Get info on a URL\" t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'url-retrieve" >> ${elispdir}/site-start.el + echo " \"url\" \"Retrieve a URL\" nil)" >> ${elispdir}/site-start.el + echo "(autoload 'url-buffer-visiting" \ + >> ${elispdir}/site-start.el + echo " \"url\" \"Find buffer visiting a URL.\" nil)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'gopher-dispatch-object" \ + >> ${elispdir}/site-start.el + echo " \"gopher\" \"Fetch gopher dir\" t)" \ + >> ${elispdir}/site-start.el + echo ";;; ${OptionEnd}" \ + >> ${elispdir}/site-start.el + if [ ! -f ${addir}/Emacs ]; then + touch ${addir}/Emacs + fi + sed -e 's/^![ ]*\(Emacs\*w3-.*\)$/&/' \ + -e "/^!!! ${OptionStart}/,/^!!! ${OptionEnd}/d" \ + ${addir}/Emacs > ${addir}/Emacs.bak + mv ${addir}/Emacs.bak ${addir}/Emacs + echo "Adding \"w3\" entry to ${addir}/Emacs" + sed -e 's/^[ ]*Emacs\*w3-.*$/! &/' ${addir}/Emacs \ + > ${addir}/Emacs.bak + echo "!!! ${OptionStart}" >> ${addir}/Emacs.bak + echo "Emacs*w3-node-style.attributeForeground: purple" \ + >> ${addir}/Emacs.bak + echo "Emacs*w3-visited-node-style.attributeForeground: blue" \ + >> ${addir}/Emacs.bak + echo "!!! End of ${OptionStart}" >> ${addir}/Emacs.bak + mv ${addir}/Emacs.bak ${addir}/Emacs + exit 0 +else + exit 0 +fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/files/dot.emacs ./files/dot.emacs --- ../../current/ports/www/w3/files/dot.emacs Sat Jan 4 09:36:51 1997 +++ ./files/dot.emacs Thu Jan 1 09:00:00 1970 @@ -1,8 +0,0 @@ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Emacs-w3 ;;;; -;; Emacs-w3(Ver.2.2.26) ;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -(setq url-keep-history t) -(setq url-be-asynchronous t) -(setq w3-default-homepage - "file://localhost/usr/share/doc/handbook/handbook.html") -;; Emacs-w3 end diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/files/dot.emacs.tmpl ./files/dot.emacs.tmpl --- ../../current/ports/www/w3/files/dot.emacs.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/dot.emacs.tmpl Sat May 31 21:18:05 1997 @@ -0,0 +1,8 @@ +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Emacs-w3 ;;;; +;; Emacs-w3(Ver.%VERSION%) ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +(setq url-keep-history t) +(setq url-be-asynchronous t) +(setq w3-default-homepage + "file://localhost/usr/share/doc/handbook/handbook.html") +;; Emacs-w3 end diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/files/md5 ./files/md5 --- ../../current/ports/www/w3/files/md5 Sun Feb 16 17:23:26 1997 +++ ./files/md5 Sat May 31 21:18:05 1997 @@ -1 +1 @@ -MD5 (w3-2.2.26.tar.gz) = e12d158809b8084bd0dc3491610b0a43 +MD5 (w3-2.2.26.tar.gz) = b53c81896353eec79911455d67d24339 diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/files/user-install ./files/user-install --- ../../current/ports/www/w3/files/user-install Sat Jan 4 09:36:55 1997 +++ ./files/user-install Thu Jan 1 09:00:00 1970 @@ -1,12 +0,0 @@ -#!/bin/sh - -PREFIX=/usr/local -SAMPLEDIR=${PREFIX}/share/examples/w3 - -if [ ! -f ${HOME}/.mosaic-hotlist-default ]; then - cp ${SAMPLEDIR}/dot.mosaic-hotlist-default ${HOME}/.mosaic-hotlist-default -fi - -mv ${HOME}/.emacs ${HOME}/.emacs.org.$$ -sed -e '/^;;* Emacs-w3 ;*$/,/^;; *Emacs-w3 end$/d' < ${HOME}/.emacs.org.$$ > ${HOME}/.emacs -cat ${SAMPLEDIR}/dot.emacs >> ${HOME}/.emacs diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/files/user-install.tmpl ./files/user-install.tmpl --- ../../current/ports/www/w3/files/user-install.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/user-install.tmpl Sat May 31 21:18:05 1997 @@ -0,0 +1,11 @@ +#!/bin/sh + +SAMPLEDIR=%SAMPLEDIR% + +if [ ! -f ${HOME}/.mosaic-hotlist-default ]; then + cp ${SAMPLEDIR}/dot.mosaic-hotlist-default ${HOME}/.mosaic-hotlist-default +fi + +mv ${HOME}/.emacs ${HOME}/.emacs.org.$$ +sed -e '/^;;* Emacs-w3 ;*$/,/^;; *Emacs-w3 end$/d' < ${HOME}/.emacs.org.$$ > ${HOME}/.emacs +cat ${SAMPLEDIR}/dot.emacs >> ${HOME}/.emacs diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/patches/patch-aa ./patches/patch-aa --- ../../current/ports/www/w3/patches/patch-aa Wed Dec 18 14:26:32 1996 +++ ./patches/patch-aa Sat May 31 21:18:13 1997 @@ -1,22 +1,31 @@ ---- Makefile.org Sun Oct 29 01:21:56 1995 -+++ Makefile Sun Dec 1 14:01:52 1996 -@@ -8,12 +8,13 @@ +--- Makefile.orig Sun Oct 29 01:21:56 1995 ++++ Makefile Sat May 31 19:15:25 1997 +@@ -1,19 +1,19 @@ + # what emacs is called on your system +-EMACS = emacs ++EMACS = ${EMACSCMD} + + # How to make a directory + # need a -p if you want to make the parents! +-MKDIR = mkdir ++MKDIR ?= mkdir + # Various other stuff used RM = rm -f - CP = cp -+INSTALL_DATA = /usr/bin/install -c -o bin -g bin -m 444 +-CP = cp ++CP ?= cp # where the Info file should go -INFODIR = ../info -+INFODIR = ${PREFIX}/info ++INFODIR ?= ../info # where the w3 lisp files should go -LISPDIR = $$HOME/lisp -+LISPDIR = ${PREFIX}/share/emacs/site-lisp/w3 ++LISPDIR = ${ELISPDIR}/w3 # Change this to be where your .emacs file is stored DOTEMACS = $$HOME/.emacs -@@ -57,16 +58,16 @@ +@@ -57,16 +57,16 @@ w3: docomp.el $(OBJECTS) @echo Build of w3 complete... diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/pkg/DEINSTALL ./pkg/DEINSTALL --- ../../current/ports/www/w3/pkg/DEINSTALL Sat Jan 4 09:36:57 1997 +++ ./pkg/DEINSTALL Thu Jan 1 09:00:00 1970 @@ -1,35 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -addir=/usr/X11R6/lib/X11/app-defaults -elispdir=${PKG_PREFIX}/share/emacs/site-lisp - -OptionStart="Emacs-w3 configuration options" -OptionEnd="End of Emacs-w3 configuration options" - -if [ "X$2" = X"DEINSTALL" ]; then - a=`grep "^\* w3:" ${infodir}/dir` - if [ "${a}" ]; then - echo "Deleting \"w3\" entry from ${infodir}/dir" - grep -v "^\* w3:" ${infodir}/dir> ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - fi - a=`grep "^;;; ${OptionStart}" ${elispdir}/site-start.el` - if [ "${a}" ]; then - echo "Deleting \"w3\" entry from ${elispdir}/site-start.el" - sed -e "/^;;; ${OptionStart}/,/^;;; ${OptionEnd}/d"\ - ${elispdir}/site-start.el \ - > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - fi - a=`grep "^!!! ${OptionStart}" ${addir}/Emacs` - if [ "${a}" ]; then - echo "Deleting \"w3\" entry from ${addir}/Emacs" - sed -e 's/^![ ]*\(Emacs\*w3-.*\)$/&/' \ - -e "/^!!! ${OptionStart}/,/^!!! ${OptionEnd}/d" \ - ${addir}/Emacs > ${addir}/Emacs.bak - mv ${addir}/Emacs.bak ${addir}/Emacs - fi -else - exit 0 -fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/pkg/INSTALL ./pkg/INSTALL --- ../../current/ports/www/w3/pkg/INSTALL Sat Jan 4 09:36:58 1997 +++ ./pkg/INSTALL Thu Jan 1 09:00:00 1970 @@ -1,96 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -addir=/usr/X11R6/lib/X11/app-defaults -elispdir=${PKG_PREFIX}/share/emacs/site-lisp - -OptionStart="Emacs-w3 configuration options" -OptionEnd="End of Emacs-w3 configuration options" - -if [ "X$2" = X"POST-INSTALL" ]; then - if [ ! -f ${infodir}/dir ]; then - cp ${FILESDIR}/dir ${infodir} - fi - grep -v "^\* w3:" ${infodir}/dir > ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - echo "Adding \"w3\" entry to ${infodir}/dir" - echo '* w3: (w3). WWW browser.' >> ${infodir}/dir - sed -e "/^;;; ${OptionStart}/,/^;;; ${OptionEnd}/d" \ - ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - echo "Adding \"w3\" entry to ${elispdir}/site-start.el" - echo ";;; ${OptionStart}" \ - >> ${elispdir}/site-start.el - echo "(setq load-path " >> ${elispdir}/site-start.el - echo " (cons (expand-file-name " >> ${elispdir}/site-start.el - echo " \"${elispdir}/w3\") load-path))" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-preview-this-buffer \"w3\" \"WWW Previewer\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-follow-url-at-point" \ - >> ${elispdir}/site-start.el - echo " \"w3\" \"Find document at pt\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3 \"w3\" \"WWW Browser\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-open-local" >> ${elispdir}/site-start.el - echo " \"w3\" \"Open local file for WWW browsing\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-fetch" >> ${elispdir}/site-start.el - echo " \"w3\" \"Open remote file for WWW browsing\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-use-hotlist" >> ${elispdir}/site-start.el - echo " \"w3\" \"Use shortcuts to view WWW docs\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-show-hotlist" >> ${elispdir}/site-start.el - echo " \"w3\" \"Use shortcuts to view WWW docs\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-follow-link" >> ${elispdir}/site-start.el - echo " \"w3\" \"Follow a hypertext link.\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-batch-fetch" >> ${elispdir}/site-start.el - echo " \"w3\" \"Batch retrieval of URLs\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-get-url-at-point" >> ${elispdir}/site-start.el - echo " \"url\" \"Find the url under the cursor\" nil)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-file-attributes" \ - >> ${elispdir}/site-start.el - echo " \"url\" \"File attributes of a URL\" nil)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-popup-info" >> ${elispdir}/site-start.el - echo " \"url\" \"Get info on a URL\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-retrieve" >> ${elispdir}/site-start.el - echo " \"url\" \"Retrieve a URL\" nil)" >> ${elispdir}/site-start.el - echo "(autoload 'url-buffer-visiting" \ - >> ${elispdir}/site-start.el - echo " \"url\" \"Find buffer visiting a URL.\" nil)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'gopher-dispatch-object" \ - >> ${elispdir}/site-start.el - echo " \"gopher\" \"Fetch gopher dir\" t)" \ - >> ${elispdir}/site-start.el - echo ";;; ${OptionEnd}" \ - >> ${elispdir}/site-start.el - if [ ! -f ${addir}/Emacs ]; then - touch ${addir}/Emacs - fi - sed -e 's/^![ ]*\(Emacs\*w3-.*\)$/&/' \ - -e "/^!!! ${OptionStart}/,/^!!! ${OptionEnd}/d" \ - ${addir}/Emacs > ${addir}/Emacs.bak - mv ${addir}/Emacs.bak ${addir}/Emacs - echo "Adding \"w3\" entry to ${addir}/Emacs" - sed -e 's/^[ ]*Emacs\*w3-.*$/! &/' ${addir}/Emacs \ - > ${addir}/Emacs.bak - echo "!!! ${OptionStart}" >> ${addir}/Emacs.bak - echo "Emacs*w3-node-style.attributeForeground: purple" \ - >> ${addir}/Emacs.bak - echo "Emacs*w3-visited-node-style.attributeForeground: blue" \ - >> ${addir}/Emacs.bak - echo "!!! End of ${OptionStart}" >> ${addir}/Emacs.bak - mv ${addir}/Emacs.bak ${addir}/Emacs - exit 0 -else - exit 0 -fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/www/w3/pkg/PLIST ./pkg/PLIST --- ../../current/ports/www/w3/pkg/PLIST Sat Jan 4 09:36:59 1997 +++ ./pkg/PLIST Sat May 31 21:20:16 1997 @@ -68,3 +68,6 @@ share/emacs/site-lisp/w3/xbm-button.elc share/emacs/site-lisp/w3/xpm-button.el share/emacs/site-lisp/w3/xpm-button.elc +@dirrm share/emacs/site-lisp/w3 +@dirrm share/examples/w3 +@dirrm share/doc/w3 >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 04:00:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA07876 for ports-outgoing; Thu, 5 Jun 1997 04:00:08 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA07853; Thu, 5 Jun 1997 04:00:04 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 04:00:04 -0700 (PDT) Resent-Message-Id: <199706051100.EAA07853@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, kiri@kiri.toba-cmt.ac.jp Received: from kiri.toba-cmt.ac.jp (kiri.toba-cmt.ac.jp [202.26.248.91]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA07756 for ; Thu, 5 Jun 1997 03:58:20 -0700 (PDT) Received: (from kiri@localhost) by kiri.toba-cmt.ac.jp (8.8.5/8.8.5) id UAA17692; Thu, 5 Jun 1997 20:02:32 +0900 (JST) Message-Id: <199706051102.UAA17692@kiri.toba-cmt.ac.jp> Date: Thu, 5 Jun 1997 20:02:32 +0900 (JST) From: Kazuhiko Kiriyama(System administrator) Reply-To: kiri@kiri.toba-cmt.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3789: Update port mew-1.70 (mail/mew). Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3789 >Category: ports >Synopsis: Update port mew-1.70 (mail/mew). >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 04:00:03 PDT 1997 >Last-Modified: >Originator: Kazuhiko Kiriyama >Organization: Toba National College of Maritime Technology. Department of Electronic Mechanical Engineering >Release: FreeBSD 2.2.2-RELEASE i386 >Environment: >Description: I've updated the port mew-1.70 (mail/mew). Current modifications is (1) Change dir installation with install-info. (2) Slave to japanese/mew Delete and Update files are respecively [Delete] : files/ (Whole directory) files/MH-postproc files/aliases files/dot.emacs files/dot.mh_profile files/md5 files/scan.form files/user-install patches/ (Whole directory) patches/patch-aa patches/patch-ab pkg/DEINSTALL pkg/INSTALL [Update] : Makefile pkg/DESCR pkg/PLIST I put the diff from ports-current(mail/mew) in "Fix:". >How-To-Repeat: >Fix: diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/Makefile ./Makefile --- ../../current/ports/mail/mew/Makefile Sun Mar 16 14:49:19 1997 +++ ./Makefile Mon Jun 2 17:29:47 1997 @@ -1,44 +1,29 @@ # New ports collection makefile for: Mew -# Version required: 1.54 +# Version required: 1.70 # Date created: 30 December 1996 # Whom: Kiriyama Kazuhiko # -# $Id: Makefile,v 1.4 1997/03/15 11:56:38 asami Exp $ +# $Id: Makefile,v 1.3 1997/01/03 16:52:53 max Exp $ # -DISTNAME= mew-1.54 +PKGNAME= mew-1.70 CATEGORIES= mail -MASTER_SITES= ftp://ftp.aist-nara.ac.jp/pub/elisp/Mew/ \ - ftp://ports.jp.freebsd.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/ - -MAINTAINER= kiri@kiri.toba-cmt.ac.jp +FILESDIR= ${.CURDIR}/../../japanese/mew/files +PATCHDIR= ${.CURDIR}/../../japanese/mew/patches BUILD_DEPENDS= emacs:${PORTSDIR}/editors/emacs RUN_DEPENDS= emacs:${PORTSDIR}/editors/emacs \ mhmail:${PORTSDIR}/mail/mh -RESTRICTED= "USA ITAR export restrictions (has PGP hooks)" - -DOCDIR= ${PREFIX}/share/doc/mew +EMACSCMD= emacs +EMACSEL= mew-mule0.el +PORTSDOCDIR= ${PREFIX}/share/doc/mew SAMPLEDIR= ${PREFIX}/share/examples/mew +ELISPDIR= ${PREFIX}/share/emacs/site-lisp +INFOFILE= mew.info +MHPOSTPROC= MH-postproc +SCANFORM= scan.form +DOTEMACS= dot.emacs +DOTMHPROFILE= dot.mh_profile -post-install: - @strip ${PREFIX}/bin/mewencode -.for f in mewencode mew-refile uumerge vscan - @chown bin:bin ${PREFIX}/bin/${f} - @chmod 555 ${PREFIX}/bin/${f} -.endfor - @${INSTALL_DATA} ${WRKSRC}/info/mew.info* ${PREFIX}/info - @${INSTALL_SCRIPT} ${FILESDIR}/MH-postproc ${PREFIX}/bin -.if !defined(NOPORTDOCS) - @${MKDIR} ${DOCDIR} - @${INSTALL_DATA} ${WRKSRC}/info/*.texi ${DOCDIR} - @${MKDIR} ${SAMPLEDIR} -.for f in dot.emacs aliases dot.mh_profile scan.form - @${INSTALL_DATA} ${FILESDIR}/${f} ${SAMPLEDIR} -.endfor - @${INSTALL_SCRIPT} ${FILESDIR}/user-install ${SAMPLEDIR} -.endif - @${SETENV} PKG_PREFIX=${PREFIX} /bin/sh ${PKGDIR}/INSTALL ${PKGNAME} POST-INSTALL - -.include +.include "${.CURDIR}/../../japanese/mew/Makefile" diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/files/MH-postproc ./files/MH-postproc --- ../../current/ports/mail/mew/files/MH-postproc Wed Dec 18 14:09:26 1996 +++ ./files/MH-postproc Thu Jan 1 09:00:00 1970 @@ -1,12 +0,0 @@ -#!/bin/sh - -while [ $# != 1 ] -do - args="$args $1" - shift -done - -/bin/cat $1 >> $HOME/Mail/.mailpost -/bin/cp $1 $HOME/Mail/lastpost -args="$args $HOME/Mail/lastpost" -/usr/local/lib/mh/post $args diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/files/aliases ./files/aliases --- ../../current/ports/mail/mew/files/aliases Wed Dec 18 14:09:26 1996 +++ ./files/aliases Thu Jan 1 09:00:00 1970 @@ -1,26 +0,0 @@ -; See comments at end of this file -; This file is almost empty as MH now supports personal aliases. -; @(#)$Id: aliases,v 1.1.1.1 1996/12/18 05:09:26 asami Exp $ - -;everyone: * - -; Blank lines and lines beginning with a ; are ignored. -; < file -> read more aliases from "file" -; foo: fum -> simple replacement -; foo: fum, fie -> list replacement -; foo: < file -> list replacement from "file" -; foo: = group -> list replacement from UNIX group -; foo: + group -> list replacement by ALL users in /etc/passwd -; with gid == group -; foo: * -> list replacement by ALL users in /etc/passwd -; with uid >= 200 -; foo*: fum -> matches foo (including the empty string) -; -; using a ';' instead of a ':' indicates that the alias should be displayed -; along with the addresses used (normally, the addresses replace the alias -; completely) -ML-FreeBSD: FreeBSD-users-jp@jp.freebsd.org -ML-fvwm: fvwm-users-jp@skylark.ics.es.osaka-u.ac.jp -ML-SKK: skk@sato.kuis.kyoto-u.ac.jp -ML-infotalk:infotalk-request@square.brl.ntt.jp -ML-skkfep: skkfep@chanchan.suri.co.jp diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/files/dot.emacs ./files/dot.emacs --- ../../current/ports/mail/mew/files/dot.emacs Sat Jan 4 01:48:41 1997 +++ ./files/dot.emacs Thu Jan 1 09:00:00 1970 @@ -1,42 +0,0 @@ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Mew ;;;;;;;;; -;; Mew (Ver.1.54) ;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -(setq mew-mail-domain-list - '("%nameserver%")) - -(cond - ((and window-system (string-match "^19" emacs-version)) - (setq hilit-mode-enable-list nil - hilit-background-mode 'light - hilit-inhibit-hooks nil - hilit-inhibit-rebinding nil) - (require 'hilit19) - ;; - (add-hook 'mew-message-hook - 'hilit-rehighlight-buffer-quietly) - (hilit-set-mode-patterns - '(mew-message-mode) - '(("^Subject:.*$" nil msg-subject) - ("^From:.*$" nil msg-from) - ("^X-.*:.*$" nil msg-quote) - ("^>.*$" nil msg-quote) - ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) - ;; - (add-hook 'mew-draft-mode-hook - 'hilit-rehighlight-buffer-quietly) - (hilit-set-mode-patterns - '(mew-draft-mode) - '(("^Subject:.*$" nil msg-subject) - ("^From:.*$" nil msg-from) - ("^X-.*:.*$" nil msg-quote) - ("^>.*$" nil msg-quote) - ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) - ) -) -(setq mew-cite-fields '("Message-ID:" "From:")) -(setq mew-cite-format "In %s \n%s writes :\n\n") -(setq mew-signature-insert-last t) -(add-hook 'mew-send-hook 'mew-draft-insert-signature) - -;; Mew end - diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/files/dot.mh_profile ./files/dot.mh_profile --- ../../current/ports/mail/mew/files/dot.mh_profile Sat Jan 4 01:48:43 1997 +++ ./files/dot.mh_profile Thu Jan 1 09:00:00 1970 @@ -1,13 +0,0 @@ -Path: Mail -postproc: MH-postproc -Draft-Folder: drafts -rmmprocc: /usr/local/bin/rmm -Msg-Protect: 600 -Folder-Protect: 700 -Draft-Protect: 600 -automhnproc: mhn -Aliasfile: aliases -Signature: %signature% -show: -showproc mhl -inc: -form scan.form -scan: -form scan.form diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/files/md5 ./files/md5 --- ../../current/ports/mail/mew/files/md5 Wed Dec 18 14:09:26 1996 +++ ./files/md5 Thu Jan 1 09:00:00 1970 @@ -1 +0,0 @@ -MD5 (mew-1.54.tar.gz) = 30176845076fe96a4bc5b7b253f126f0 diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/files/scan.form ./files/scan.form --- ../../current/ports/mail/mew/files/scan.form Wed Dec 18 14:09:26 1996 +++ ./files/scan.form Thu Jan 1 09:00:00 1970 @@ -1,4 +0,0 @@ -%4(msg)%<(cur)+%| %>%<{replied}-%?{encrypted}E%| %>\ -%02(mon{date})/%02(mday{date})%<{date} %|*%>\ -%<(mymbox{from})%<{to}To:%14(friendly{to})%>%>%<(zero)%17(friendly{from})%>\ -%{subject}%<{body}<<%{body}>>%> diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/files/user-install ./files/user-install --- ../../current/ports/mail/mew/files/user-install Sat Jan 4 01:48:44 1997 +++ ./files/user-install Thu Jan 1 09:00:00 1970 @@ -1,107 +0,0 @@ -#!/bin/sh - -PREFIX=/usr/local -DIALOG=/usr/bin/dialog -SAMPLEDIR=${PREFIX}/share/examples/mew - -case ${TERM} in -emacs) - echo "Here is \"Emacs\" shell. Try on other terminal." - exit 1 - ;; -esac - -MainMenu="This is a Set up Menu for specifying the User mail environment \n\ -correctly. You must at least name server IP address and your \n\ -signature. \n\ -Please specify these issues by selecting followng items." - -NameserverMenu="Specify your Name server IP address you refer." - -SignatureMenu="Specify your Signature Mew add when posting" - -nameserver="" -signature="" - -answer=None -while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "Mew Set up User Environment" \ - --hline "Select Set up Items" \ - --hfile printer_cfg.hlp \ - --menu "${MainMenu}" -1 -1 3 \ - Nameserver "Set the Name server IP address you refer" \ - Signature "Set your Signature Mew adds at posting" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - case $retval in - 0) if [ -z ${answer} ]; then - echo "Nothing selected" - exit 1 - fi - ;; - 1) echo "Cancel pressed." - exit 1 - ;; - esac - case ${answer} in - Nameserver) - if [ ! -z "${nameserver}" ]; then - ${DIALOG} --title "Confirm Name server" \ - --hline "Press Yes/No" \ - --hfile printer_cfg.hlp \ - --yesno "Your Name server has set \"${nameserver}\". Is this OK?" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Enter your Name server IP address" \ - --hline "Write your name server" \ - --hfile printer_cfg.hlp \ - --inputbox "${NameserverMenu}" -1 -1 \ - 2> /tmp/input.tmp.$$ - nameserver=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Signature) - if [ ! -z "${signature}" ]; then - ${DIALOG} --title "Confirm your Signature" \ - --hline "Press Yes/No" \ - --hfile printer_cfg.hlp \ - --yesno "Your Signature has set \"${signature}\". Is this OK?" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Signature" \ - --hline "Write your Signature" \ - --hfile printer_cfg.hlp \ - --inputbox "${SignatureMenu}" -1 -1 \ - 2> /tmp/input.tmp.$$ - signature=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac -done - -if [ ! -d ${HOME}/Mail ]; then ${PREFIX}/bin/inc; fi -if [ ! -d ${HOME}/Mail/drafts ]; then mkdir -p ${HOME}/Mail/drafts; fi - -cp ${HOME}/.emacs ${HOME}/.emacs.org.$$ -sed -e '/^;;* Mew ;*$/,/^;; *Mew end$/d' < ${HOME}/.emacs.org.$$ \ - > ${HOME}/.emacs -sed -e "s/%nameserver%/${nameserver}/g" < ${SAMPLEDIR}/dot.emacs > /tmp/.emacs.$$ -cat /tmp/.emacs.$$ >> ${HOME}/.emacs -rm -f /tmp/.emacs.$$ - -if [ -f ${HOME}/.mh_profile ]; then - mv ${HOME}/.mh_profile ${HOME}/.mh_profile.org.$$ -fi -sed -e "s/%signature%/${signature}/g" < ${SAMPLEDIR}/dot.mh_profile \ - > ${HOME}/.mh_profile - -if [ -f ${HOME}/Mail/scan.form ]; then - mv ${HOME}/Mail/scan.form ${HOME}/Mail/scan.form.org.$$ -fi -cp ${SAMPLEDIR}/scan.form ${HOME}/Mail/scan.form - diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/patches/patch-aa ./patches/patch-aa --- ../../current/ports/mail/mew/patches/patch-aa Sat Jan 4 01:46:25 1997 +++ ./patches/patch-aa Thu Jan 1 09:00:00 1970 @@ -1,49 +0,0 @@ ---- Makefile.orig Tue Nov 26 01:34:44 1996 -+++ Makefile Sun Dec 29 04:11:55 1996 -@@ -15,21 +15,21 @@ - - CC = gcc - CFLAGS = -O --BINDIR = /usr/local/bin --MAKEFLAGS = CFLAGS="$(CFLAGS)" CC=$(CC) -+PREFIX?= /usr/local -+BINDIR = ${PREFIX}/bin - - ## - ## for byte-compile - ## - --#EMACS = emacs -+EMACS = emacs - #EMACS = xemacs --EMACS = mule -+#EMACS = mule - #EMACS = mule2 - #EMACS = mule19 - - #ELISPDIR = /usr/local/share/emacs/site-lisp --ELISPDIR = /usr/local/lib/$(EMACS)/site-lisp -+ELISPDIR = ${PREFIX}/share/$(EMACS)/site-lisp/mew - #ELISPDIR = /usr/local/lib/emacs - - -@@ -46,7 +46,7 @@ - $(EMACS) -batch -l ./$(LDPATH) -l ./mew.el -f batch-byte-compile $< - - all: $(TARGETS) $(MEW) -- cd $(BIN); $(MAKE) $(MAKEFLAGS) -+ cd $(BIN); $(MAKE) CFLAGS="$(CFLAGS)" CC="$(CC)" - - $(TARGETS): $(LDPATH) mew.el - -@@ -57,8 +57,9 @@ - $(EMACS) -batch -l ./$(LDPATH) -l ./mew-attach.el -f batch-byte-compile mew.el - - install: $(TARGETS) $(MEW) -+ if [ ! -d $(ELISPDIR) ]; then mkdir -p $(ELISPDIR); else true; fi ; - cp $(MEW) $(TARGETS) $(ELISPDIR) -- cd $(BIN); $(MAKE) $(MAKEFLAGS) -+ cd $(BIN); $(MAKE) install CFLAGS="$(CFLAGS)" CC="$(CC)" BINDIR="$(BINDIR)" - - clean: - $(RM) $(MEW) $(TARGETS) $(LDPATH) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/patches/patch-ab ./patches/patch-ab --- ../../current/ports/mail/mew/patches/patch-ab Sat Jan 4 01:50:45 1997 +++ ./patches/patch-ab Thu Jan 1 09:00:00 1970 @@ -1,23 +0,0 @@ ---- bin/Makefile.orig Tue Nov 26 01:34:52 1996 -+++ bin/Makefile Fri Jan 3 23:45:19 1997 -@@ -7,7 +7,8 @@ - CNF = config.status config.cache config.log - RM = rm -f - --BINDIR = /usr/local/bin -+PREFIX?= /usr/local -+BINDIR = ${PREFIX}/bin - - #CFLAGS = -g - -@@ -17,8 +18,8 @@ - $(CC) -o $@ $(OBJ) - $(RM) $(AL1) - $(RM) $(AL2) -- ln $(PRG) $(AL1) -- ln $(PRG) $(AL2) -+ ln -fs $(PRG) $(AL1) -+ ln -fs $(PRG) $(AL2) - - $(OTH) : - ./configure diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/pkg/DEINSTALL ./pkg/DEINSTALL --- ../../current/ports/mail/mew/pkg/DEINSTALL Sat Jan 4 01:48:47 1997 +++ ./pkg/DEINSTALL Thu Jan 1 09:00:00 1970 @@ -1,25 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -elispdir=${PKG_PREFIX}/share/emacs/site-lisp - -OptionStart=";;; Mew configuration options" -OptionEnd=";;; End of Mew configuration options" - -if [ "X$2" = X"DEINSTALL" ]; then - a=`grep Mew ${infodir}/dir` - if [ "${a}" ]; then - echo "Deleting \"Mew\" entry from ${infodir}/dir" - grep -v "^\* Mew:" ${infodir}/dir > ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - fi - a=`grep "^${OptionStart}" ${elispdir}/site-start.el` - if [ "${a}" ]; then - echo "Deleting \"Mew\" entry from ${elispdir}/site-start.el" - sed -e "/^${OptionStart}/,/^${OptionEnd}/d" \ - ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - fi -else - exit 0 -fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/pkg/DESCR ./pkg/DESCR --- ../../current/ports/mail/mew/pkg/DESCR Sat Jan 4 01:48:49 1997 +++ ./pkg/DESCR Mon May 5 15:09:13 1997 @@ -1,4 +1,4 @@ -Mew (1.54) is a "Message interface to Emacs Window" to integrate +Mew is a "Message interface to Emacs Window" to integrate - electronic mail - NetNews diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/pkg/INSTALL ./pkg/INSTALL --- ../../current/ports/mail/mew/pkg/INSTALL Sat Jan 4 01:48:50 1997 +++ ./pkg/INSTALL Thu Jan 1 09:00:00 1970 @@ -1,44 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -elispdir=${PKG_PREFIX}/share/emacs/site-lisp - -OptionStart=";;; Mew configuration options" -OptionEnd=";;; End of Mew configuration options" - -if [ "X$2" = X"POST-INSTALL" ]; then - a=`grep Mew ${infodir}/dir` - if [ "${a}" ]; then - grep -v "^\* Mew:" ${infodir}/dir > ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - fi - echo "Adding \"Mew\" to ${infodir}/dir" - echo '* Mew: (mew.info). Message interface to Emacs Window.' \ - >> ${infodir}/dir - a=`grep "^${OptionStart}" ${elispdir}/site-start.el` - if [ "${a}" ]; then - sed -e "/^${OptionStart}/,/^${OptionEnd}/d" \ - ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - fi - echo "Adding \"Mew\" entry to ${elispdir}/site-start.el" - echo "${OptionStart}" >> ${elispdir}/site-start.el - echo "(setq load-path (cons \"${elispdir}/mew\" load-path))" \ - >> ${elispdir}/site-start.el - echo "(setq mew-init-hook" >> ${elispdir}/site-start.el - echo " (function" >> ${elispdir}/site-start.el - echo " (lambda ()" >> ${elispdir}/site-start.el - echo " (setq kill-emacs-hook" >> ${elispdir}/site-start.el - echo " (function mew-mark-process-all-folders)))))" \ - >> ${elispdir}/site-start.el - echo "(autoload 'mew \"mew\" nil t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'mew-send \"mew\" nil t)" \ - >> ${elispdir}/site-start.el - echo "${OptionEnd}" \ - >> ${elispdir}/site-start.el - exit 0 -else - exit 0 -fi - diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/mail/mew/pkg/PLIST ./pkg/PLIST --- ../../current/ports/mail/mew/pkg/PLIST Sat Jan 4 01:48:51 1997 +++ ./pkg/PLIST Mon May 5 16:23:45 1997 @@ -1,22 +1,25 @@ bin/MH-postproc bin/mew-refile bin/mewencode -@exec ln -sf %B/mewencode %B/mewdecode; ln -sf %B/mewencode %B/mewcat -@unexec rm -f %B/mewdecode; rm -f %B/mewcat +bin/mewdecode +bin/mewcat bin/uumerge bin/vscan info/mew.info info/mew.info-1 info/mew.info-2 -info/mew.info-3 -share/doc/mew/mew.texi -share/examples/mew/dot.emacs -share/examples/mew/dot.mh_profile -share/examples/mew/aliases -share/examples/mew/scan.form -share/examples/mew/user-install +info/mew.jis.info +info/mew.jis.info-1 +info/mew.jis.info-2 +info/mew.jis.info-3 +share/emacs/site-lisp/mew/mew-mule0.el +share/emacs/site-lisp/mew/mew-cache.elc +share/emacs/site-lisp/mew/mew-env.elc +share/emacs/site-lisp/mew/mew-func.elc +share/emacs/site-lisp/mew/mew-mark.elc +share/emacs/site-lisp/mew/mew-mime.elc +share/emacs/site-lisp/mew/mew-minibuf.elc share/emacs/site-lisp/mew/mew-attach.elc -share/emacs/site-lisp/mew/mew-charset.elc share/emacs/site-lisp/mew/mew-decode.elc share/emacs/site-lisp/mew/mew-demo.elc share/emacs/site-lisp/mew/mew-draft.elc @@ -33,3 +36,13 @@ share/emacs/site-lisp/mew/mew-syntax.elc share/emacs/site-lisp/mew/mew-virtual.elc share/emacs/site-lisp/mew/mew.elc +share/doc/mew/mew.texi +share/doc/mew/mew.jis.texi +share/examples/mew/dot.emacs +share/examples/mew/dot.mh_profile +share/examples/mew/aliases +share/examples/mew/scan.form +share/examples/mew/user-install +@dirrm share/emacs/site-lisp/mew +@dirrm share/doc/mew +@dirrm share/examples/mew >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 04:00:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA07906 for ports-outgoing; Thu, 5 Jun 1997 04:00:11 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA07870; Thu, 5 Jun 1997 04:00:07 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 04:00:07 -0700 (PDT) Resent-Message-Id: <199706051100.EAA07870@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, kiri@kiri.toba-cmt.ac.jp Received: from kiri.toba-cmt.ac.jp (kiri.toba-cmt.ac.jp [202.26.248.91]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA07774 for ; Thu, 5 Jun 1997 03:59:16 -0700 (PDT) Received: (from kiri@localhost) by kiri.toba-cmt.ac.jp (8.8.5/8.8.5) id UAA18049; Thu, 5 Jun 1997 20:03:35 +0900 (JST) Message-Id: <199706051103.UAA18049@kiri.toba-cmt.ac.jp> Date: Thu, 5 Jun 1997 20:03:35 +0900 (JST) From: Kazuhiko Kiriyama(System administrator) Reply-To: kiri@kiri.toba-cmt.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3790: Update port mmm-0.40 (www/mmm). Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3790 >Category: ports >Synopsis: Update port mmm-0.40 (www/mmm). >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 04:00:05 PDT 1997 >Last-Modified: >Originator: Kazuhiko Kiriyama >Organization: Toba National College of Maritime Technology. Department of Electronic Mechanical Engineering >Release: FreeBSD 2.2.2-RELEASE i386 >Environment: >Description: I've updated the port mmm-0.40 (www/mmm). Current modifications is (1) Change dir installation with install-info. Add,Delete and Update files are respecively [Add] : files/prefs.tmpl files/surfboard.html files/user-install.tmpl [Delete] : files/prefs files/user-install [Update] : Makefile files/md5 patches/patch-ab pkg/COMMENT pkg/DESCR pkg/MESSAGE pkg/PLIST I put the diff from ports-current(www/mmm) in "Fix:". >How-To-Repeat: >Fix: diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/Makefile ./Makefile --- /usr/ports/current/ports/www/mmm/Makefile Sun Apr 27 21:19:14 1997 +++ ./Makefile Mon Jun 2 17:31:07 1997 @@ -7,15 +7,18 @@ # DISTNAME= mmm-0.40 -CATEGORIES= www tk41 +CATEGORIES?= www MASTER_SITES= ftp://ftp.inria.fr/INRIA/Projects/cristal/Francois.Rouaix/mmm/ \ - ftp://ftp.kurims.kyoto-u.ac.jp/pub/lang/mmm/ -DISTFILES= mmm40-src.tar.gz + ftp://ftp.kurims.kyoto-u.ac.jp/pub/lang/mmm/ \ + http://wwwfun.kurims.kyoto-u.ac.jp/jmmm/040/dists/ +DISTFILES= mmm40-src.tar.gz sboard.tgz +EXTRACT_ONLY= mmm40-src.tar.gz MAINTAINER= kiri@kiri.toba-cmt.ac.jp -LIB_DEPENDS= tk41\\.:${PORTSDIR}/x11/tk41 -BUILD_DEPENDS= ocaml:${PORTSDIR}/lang/ocaml \ +LIB_DEPENDS?= tcl76\\.:${PORTSDIR}/lang/tcl76 \ + tk42\\.:${PORTSDIR}/x11/tk42 +BUILD_DEPENDS?= ocaml:${PORTSDIR}/lang/ocaml \ ${PREFIX}/lib/ocaml/camltk41/libcamltk41.a:${PORTSDIR}/x11/camltk41 WRKSRC= ${WRKDIR}/mmm @@ -25,15 +28,36 @@ INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ INSTALL_PROGRAM="${INSTALL_SCRIPT}" -DOCDIR= ${PREFIX}/share/doc/mmm +MMMAD?= MMM.ad +JAPANESEMODE?= 0 +PORTSDOCDIR= ${PREFIX}/share/doc/mmm SAMPLEDIR= ${PREFIX}/share/examples/mmm +post-extract: + @${EXTRACT_CMD} -C ${WRKSRC} -xzf ${DISTDIR}/sboard.tgz + +pre-patch: + @${PATCH} ${PATCH_DIST_ARGS} < ${WRKSRC}/Makefile.patch.surfboard + +post-build: +.for f in user-install prefs + @${SED} -e "s,%PREFIX%,${PREFIX},g" \ + -e "s,%SAMPLEDIR%,${SAMPLEDIR},g" \ + -e "s,%RM%,${RM},g" \ + -e "s,%SED%,${SED},g" \ + -e "s,%CP%,${CP},g" \ + -e "s,%ECHO%,${ECHO},g" \ + -e "s,%MMMAD%,${MMMAD},g" \ + -e "s,%JAPANESEMODE%,${JAPANESEMODE},g" \ + < ${FILESDIR}/${f}.tmpl > ${FILESDIR}/${f} +.endfor + post-install: .if !defined(NOPORTDOCS) - @${MKDIR} ${DOCDIR} + @${MKDIR} ${PORTSDOCDIR} @${MKDIR} ${SAMPLEDIR} @${INSTALL_DATA} ${FILESDIR}/prefs ${SAMPLEDIR} - @${INSTALL_DATA} ${WRKSRC}/INSTALL ${DOCDIR} + @${INSTALL_DATA} ${WRKSRC}/INSTALL ${PORTSDOCDIR} .for f in always_use_proxy applets mailto_program attempt_smooth_scroll \ max_image_connections attempt_tables no_images_at_all dtd \ password_lifetime gamma_correction proxy_host hotlist_program \ @@ -41,8 +65,14 @@ image_loading timeout_on_headers jpeg_converter user_agent @${INSTALL_DATA} ${FILESDIR}/${f}.hlp ${SAMPLEDIR} .endfor + @${INSTALL_DATA} ${FILESDIR}/surfboard.html ${SAMPLEDIR} @${INSTALL_SCRIPT} ${FILESDIR}/user-install ${SAMPLEDIR} .endif + @${INSTALL_SCRIPT} ${WRKSRC}/sboard/surfboard \ + ${WRKSRC}/sboard/surfboard_remote ${PREFIX}/bin @${CAT} ${PKGDIR}/MESSAGE + +pre-clean: + @${RM} -f ${FILESDIR}/user-install ${FILESDIR}/prefs .include diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/files/md5 ./files/md5 --- /usr/ports/current/ports/www/mmm/files/md5 Fri Jan 3 21:19:50 1997 +++ ./files/md5 Sun Jun 1 12:41:43 1997 @@ -1 +1,2 @@ MD5 (mmm40-src.tar.gz) = c668c559457917f5a30777eb83e47764 +MD5 (sboard.tgz) = fb8c1e6ad5e6afa1dd03eab589e8f30b diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/files/prefs ./files/prefs --- /usr/ports/current/ports/www/mmm/files/prefs Fri Jan 3 21:30:37 1997 +++ ./files/prefs Thu Jan 1 09:00:00 1970 @@ -1,51 +0,0 @@ -Paranoid:%paranoid% -Text fit debug:0 -Active:%active% -Bold:-*-*-bold-*-normal-*-*-*-*-*-*-*-iso8859-1 -Password lifetime (minutes):%password_lifetime% -

font:-*-helvetica-bold-r-normal-*-14-*-*-*-*-*-iso8859-1 -Mailto program:%mailto_program% -Password save file:%password_save_file% -Max cached widgets per window:5 -HTML Display log:0 -Italic:-*-*-*-o-normal-*-*-*-*-*-*-*-iso8859-1 -Proxy host:%proxy_host% -Gamma correction:%gamma_correction% -Keep only history:0 -DTD:%dtd% -User Agent:%user_agent% -

font:-*-helvetica-medium-o-normal-*-14-*-*-*-*-*-iso8859-1 -General trace:1 -Attempt smooth scroll:%attempt_smooth_scroll% -Max number of documents:30 -Always Use Proxy:%always_use_proxy% -Local binaries path:%local_binaries_path% -
font:-*-helvetica-bold-r-normal-*-14-*-*-*-*-*-iso8859-1 -Cache debug:0 -Proxy port:%proxy_port% -No images at all:%no_images_at_all% -CamlTk Debug:0 -HTTP Send Referer:%http_send_referer% -Max image connections:3 -Attempt tables:%attempt_tables% -Use balloon helps:1 -Follow document colors:1 -

font:-*-helvetica-bold-r-normal-*-24-*-*-*-*-*-iso8859-1 -Timeout on headers (seconds):%timeout_on_headers% -Automatic GIF animation display:1 -Use GIF animation:0 -Fixed:-*-courier-*-*-normal-*-*-*-*-*-*-*-iso8859-1 -Background color:white -Strict HTML lexing:%strict_html_lexing% -Widget Cache debug:0 -JPEG converter:%jpeg_converter% -

font:-*-helvetica-bold-r-normal-*-18-*-*-*-*-*-iso8859-1 -Japanese mode:0 -HTML Lexical errors:0 -Table debug:1 -HTTP Requests:1 -Image loading:%image_loading% -Default font:-*-helvetica-medium-r-normal-*-14-*-*-*-*-*-iso8859-1 -Hotlist program:%hotlist_program% -

font:-*-helvetica-medium-o-normal-*-18-*-*-*-*-*-iso8859-1 -Delete how much when full:5 diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/files/prefs.tmpl ./files/prefs.tmpl --- /usr/ports/current/ports/www/mmm/files/prefs.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/prefs.tmpl Sun Jun 1 12:13:25 1997 @@ -0,0 +1,51 @@ +Paranoid:%paranoid% +Text fit debug:0 +Active:%active% +Bold:-*-*-bold-*-normal-*-*-*-*-*-*-*-iso8859-1 +Password lifetime (minutes):%password_lifetime% +

font:-*-helvetica-bold-r-normal-*-14-*-*-*-*-*-iso8859-1 +Mailto program:%mailto_program% +Password save file:%password_save_file% +Max cached widgets per window:5 +HTML Display log:0 +Italic:-*-*-*-o-normal-*-*-*-*-*-*-*-iso8859-1 +Proxy host:%proxy_host% +Gamma correction:%gamma_correction% +Keep only history:0 +DTD:%dtd% +User Agent:%user_agent% +

font:-*-helvetica-medium-o-normal-*-14-*-*-*-*-*-iso8859-1 +General trace:0 +Attempt smooth scroll:%attempt_smooth_scroll% +Max number of documents:30 +Always Use Proxy:%always_use_proxy% +Local binaries path:%local_binaries_path% +
font:-*-helvetica-bold-r-normal-*-14-*-*-*-*-*-iso8859-1 +Cache debug:0 +Proxy port:%proxy_port% +No images at all:%no_images_at_all% +CamlTk Debug:0 +HTTP Send Referer:%http_send_referer% +Max image connections:3 +Attempt tables:%attempt_tables% +Use balloon helps:1 +Follow document colors:1 +

font:-*-helvetica-bold-r-normal-*-24-*-*-*-*-*-iso8859-1 +Timeout on headers (seconds):%timeout_on_headers% +Automatic GIF animation display:1 +Use GIF animation:0 +Fixed:-*-courier-*-*-normal-*-*-*-*-*-*-*-iso8859-1 +Background color:white +Strict HTML lexing:%strict_html_lexing% +Widget Cache debug:0 +JPEG converter:%jpeg_converter% +

font:-*-helvetica-bold-r-normal-*-18-*-*-*-*-*-iso8859-1 +Japanese mode:%JAPANESEMODE% +HTML Lexical errors:0 +Table debug:0 +HTTP Requests:0 +Image loading:%image_loading% +Default font:-*-helvetica-medium-r-normal-*-14-*-*-*-*-*-iso8859-1 +Hotlist program:%hotlist_program% +

font:-*-helvetica-medium-o-normal-*-18-*-*-*-*-*-iso8859-1 +Delete how much when full:5 diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/files/surfboard.html ./files/surfboard.html --- /usr/ports/current/ports/www/mmm/files/surfboard.html Thu Jan 1 09:00:00 1970 +++ ./files/surfboard.html Sun Jun 1 14:25:59 1997 @@ -0,0 +1,14 @@ + + +Bookmarks for %user_name% +

Bookmarks for %user_name%

+ +

+

Walnut Creek CDROM +
Welcome to Lycos +
AltaVista Search: Main Page +
FreeBSD Inc. +
MMM Browser Home Page +

diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/files/user-install ./files/user-install --- /usr/ports/current/ports/www/mmm/files/user-install Mon Jan 6 23:18:52 1997 +++ ./files/user-install Thu Jan 1 09:00:00 1970 @@ -1,644 +0,0 @@ -#!/bin/sh - -PREFIX=/usr/local -LIBDIR=${PREFIX}/lib/mmm -DOCDIR=${PREFIX}/share/examples/mmm - -SED=/usr/bin/sed -CP=/bin/cp -DIALOG=/usr/bin/dialog - -case ${TERM} in -emacs) - echo "Here is \"Emacs\" shell. Try on other terminal." - exit 1 - ;; -esac - -MainMenu="This is a Set up Menu for specifying the MMM User environment \n\ -correctly. You must set at least your Proxy host name. Others are \n\ -supposed to be set \"Normal Values\". \n\ -\n\ -For more detail specifications click \"MMM\" on MMM, and then select \n\ -\"Preferences\". You should be notice to be overriden default preference \n\ -file \"~/.mmm/prefs\" by doing \"Preferences\" on MMM. Some of which \n\ -might be bad for FreeBSD. -\n\ -Please set your environment by selecting followng items." - -Protocols="Proxy host name, Proxy port, Always Use Proxy or not, \n\ -HTTP Send referer, User Agent, Timeout on headers, \n\ -Password lifetime, Password save file, Proxy port and \n\ -Local binaries path would be set.\n\ -\n\ -But if you use in default setting, only \"Proxy host name\" \n\ -MUST BE SET for your site." - -Proxy_host="Write your Proxy host name (Press F1 to Help)" - -Always_Use_Proxy="You always use proxy? (Press F1 to Help) \n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -HTTP_Send_referer="You adopt \"HTTP Send referer\"? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -User_Agent="Specify your \"User Agent\"(Press F1 to Help)" - -Timeout_On_Headers="Specify Timeout on headers in seconds(Press F1 to Help)" - -Password_Lifetime="Specify Password lifetime in seconds (Press F1 to Help)" - -Password_Save_File="Specify Password save file (Press F1 to Help)" - -Local_Binaries_Path="Specify Local binaries path (Press F1 to Help)" - -HTML_parsing_and_display="DTD, Strict HTML lexing, Attempt tables and \n\ -Attempt smooth scroll would be set.\n\ -\n\ -But if you use in default setting, NOTHING should be done." - -DTD="Specify DTD (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Strict_HTML_lexing="Strict HTML lexing? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Attempt_tables="Attempt tables? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Attempt_smooth_scroll="Attempt smooth scroll? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Images="Image loading, Max image connections, Gamma correction and \n\ -JPEG Converter would be set.\n\ -\n\ -But if you use in default setting, NOTHING should be done." - -No_images_at_all="No images at all? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Image_loading="Specify Image loading (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Max_Image_Connections="Specify Max image connections (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Gamma_Correction="Specify Gamma Correction (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -JPEG_Converter="Specify JPEG Converter (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -External_Programs="Mailto program and Hotlist program would be set.\n\ -\n\ -But if you use in default setting, NOTHING should be done." - -Mailto_program="Specify Mailto program (Press F1 to Help)" - -Hotlist_program="Specify Hotlist program (Press F1 to Help)" - -Applets="Specify Applets (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -proxy_host="" -proxy_port=80 -always_use_proxy=0 -http_send_referer=0 -user_agent="MMM/0.40" -timeout_on_headers=60 -password_lifetime=60 -password_save_file="" -local_binaries_path="" -dtd="HTML 3.2" -strict_html_lexing=0 -attempt_tables=1 -attempt_smooth_scroll=0 -no_images_at_all=0 -image_loading="After document, automatic" -max_image_connections=3 -gamma_correction=1 -jpeg_converter=djpeg -mailto_program="" -hotlist_program="" -active=1 -paranoid=0 - -Reconfirm=' -Protocols - - Proxy host : "%proxy_host%" - - Proxy port : "%proxy_port%" - - Always Use Proxy : "%always_use_proxy%" - - HTTP Send referer : "%http_send_referer%" - - User Agent : "%user_agent%" - - Timeout on headers (seconds): "%timeout_on_headers%" - - Password lifetime (minutes) : "%password_lifetime%" - - Password save file : "%password_save_file%" - - Local binaries path : "%local_binaries_path%" - -HTML parsing and display - - DTD : "%dtd%" - - Strict HTML lexing : "%strict_html_lexing%" - - Attempt tables : "%attempt_tables%" - - Attempt smooth scroll : "%attempt_smooth_scroll%" - -Images - - No images at all : "%no_images_at_all%" - - Image loading : "%image_loading%" - - Max image connections : "%max_image_connections%" - - Gamma correction : "%gamma_correction%" - - JPEG Converter : "%jpeg_converter%" - -External Programs - - Mailto program : "%mailto_program%" - - Hotlist program : "%hotlist_program%" - -Applets - - Paranoid : "%paranoid%" - - Active : "%active%"' - -SEDCMD='${SED} -e "s@%proxy_host%@${proxy_host}@g" - -e "s@%proxy_port%@${proxy_port}@g" - -e "s@%always_use_proxy%@${always_use_proxy}@g" - -e "s@%http_send_referer%@${http_send_referer}@g" - -e "s@%user_agent%@${user_agent}@g" - -e "s@%timeout_on_headers%@${timeout_on_headers}@g" - -e "s@%password_lifetime%@${password_lifetime}@g" - -e "s@%password_save_file%@${password_save_file}@g" - -e "s@%local_binaries_path%@${local_binaries_path}@g" - -e "s@%dtd%@${dtd}@g" - -e "s@%strict_html_lexing%@${strict_html_lexing}@g" - -e "s@%attempt_tables%@${attempt_tables}@g" - -e "s@%attempt_smooth_scroll%@${attempt_smooth_scroll}@g" - -e "s@%no_images_at_all%@${no_images_at_all}@g" - -e "s@%image_loading%@${image_loading}@g" - -e "s@%max_image_connections%@${max_image_connections}@g" - -e "s@%gamma_correction%@${gamma_correction}@g" - -e "s@%jpeg_converter%@${jpeg_converter}@g" - -e "s@%mailto_program%@${mailto_program}@g" - -e "s@%hotlist_program%@${hotlist_program}@g" - -e "s@%active%@${active}@g" - -e "s@%paranoid%@${paranoid}@g"' - -answer=None - -while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up User Environment" \ - --hline "Select Set up Items" \ - --menu "${MainMenu}" -1 -1 7 \ - Protocols "Proxy host,HTTP Send referer,Password,..." \ - HTML "HTML parsing and display" \ - Images "Image loading,JPEG Converter,..." \ - External "External Programs(Mail and Hotlist)" \ - Applets "Applets(Active or Paranoid)" \ - Reconfirm "Reconfirm all settings" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - case $retval in - 0) if [ -z ${answer} ]; then - echo "Nothing selected" - exit 1 - fi - ;; - 1) echo "Cancel pressed." - exit 1 - ;; - 255) echo "ESC pressed." - exit 1 - ;; - esac - case ${answer} in - Protocols) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up Protocols" \ - --hline "Select Set up Items" \ - --menu "${Protocols}" -1 -1 10 \ - Host "Proxy host name" \ - Port "Proxy port number" \ - Always "Always Use Proxy or not" \ - Referer "HTTP Send referer or not" \ - User "User Agent" \ - Timeout "Timeout on headers (seconds)" \ - Life "Password lifetime (minutes)" \ - Save "Password save file" \ - Binary "Local binaries path" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - Host) - if [ ! -z "${proxy_host}" ]; then - ${DIALOG} --title "Confirm your Proxy host name" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/proxy_host.hlp \ - --yesno "Your Proxy host name has set \"${proxy_host}\". Is -this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Proxy host name" \ - --hline "Write your Proxy host name" \ - --hfile ${DOCDIR}/proxy_host.hlp \ - --inputbox "${Proxy_host}" -1 -1 \ - 2> /tmp/input.tmp.$$ - proxy_host=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Port) - if [ ! -z "${proxy_port}" ]; then - ${DIALOG} --title "Confirm your Proxy port number" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/proxy_port.hlp \ - --yesno "Your Proxy port number has set \"${proxy_port}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Proxy port number" \ - --hline "Put your Proxy port number" \ - --hfile ${DOCDIR}/proxy_port.hlp \ - --inputbox "${Proxy_port}" -1 -1 \ - 2> /tmp/input.tmp.$$ - proxy_port=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Always) - ${DIALOG} --title "Always Use Proxy" \ - --hline "" \ - --hfile ${DOCDIR}/always_use_proxy.hlp \ - --checklist "${Always_Use_Proxy}" -1 -1 1 \ - "1" "Always Use Proxy" OFF \ - 2> /tmp/checklist.tmp.$$ - always_use_proxy=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Referer) - ${DIALOG} --title "HTTP Send referer" \ - --hline "" \ - --hfile ${DOCDIR}/http_send_refer.hlp \ - --checklist "${HTTP_Send_referer}" -1 -1 1 \ - "1" "Set HTTP Send referer" OFF \ - 2> /tmp/checklist.tmp.$$ - http_send_referer=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - User) - if [ ! -z "${user_agent}" ]; then - ${DIALOG} --title "Confirm your User Agent" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/user_agent.hlp \ - --yesno "Your User Agent has set \"${user_agent}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your User Agent" \ - --hline "Write your User Agent" \ - --hfile ${DOCDIR}/user_agent.hlp \ - --inputbox "${User_Agent}" -1 -1 \ - 2> /tmp/input.tmp.$$ - user_agent=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Timeout) - if [ ! -z "${timeout_on_headers}" ]; then - ${DIALOG} --title "Confirm Timeout on headers (seconds)" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/timeout_on_headers.hlp \ - --yesno "Timeout on headers (seconds) has set \"${timeout_on_headers}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Timeout on headers (seconds)" \ - --hline "Write Timeout on headers (seconds)" \ - --hfile ${DOCDIR}/timeout_on_headers.hlp \ - --inputbox "${Timeout_On_Headers}" -1 -1 \ - 2> /tmp/input.tmp.$$ - timeout_on_headers=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Life) - if [ ! -z "${password_lifetime}" ]; then - ${DIALOG} --title "Confirm your Password lifetime (minutes)" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/password_lifetime.hlp \ - --yesno "Your Password lifetime (minutes) has set \"${password_lifetime}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Password lifetime (minutes)" \ - --hline "Write your Password lifetime (minutes)" \ - --hfile ${DOCDIR}/password_lifetime.hlp \ - --inputbox "${Password_Lifetime}" -1 -1 \ - 2> /tmp/input.tmp.$$ - password_lifetime=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Save) - if [ ! -z "${password_save_file}" ]; then - ${DIALOG} --title "Confirm your Password save file" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/password_save_file.hlp \ - --yesno "Your Password save file has set \"${password_save_file}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Password save file" \ - --hline "Write your Password save file" \ - --hfile ${DOCDIR}/password_lifetime.hlp \ - --inputbox "${Password_Save_File}" -1 -1 \ - 2> /tmp/input.tmp.$$ - password_save_file=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Binary) - if [ ! -z "${local_binaries_path}" ]; then - ${DIALOG} --title "Confirm your Local binaries path" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/local_binaries_path.hlp \ - --yesno "Your Local binaries path has set \"${local_binaries_path}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Local binaries path" \ - --hline "Write your Local binaries path" \ - --hfile ${DOCDIR}/local_binaries_path.hlp \ - --inputbox "${Local_Binaries_Path}" -1 -1 \ - 2> /tmp/input.tmp.$$ - local_binaries_path=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac - done - answer=None - ;; - HTML) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up HTML parsing and display" \ - --hline "Select Set up Items" \ - --menu "${HTML_parsing_and_display}" -1 -1 5 \ - DTD "HTML code difinition" \ - Strict "Strict HTML lexing" \ - Tables "Attempt tables" \ - Smooth "Attempt smooth scroll" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - DTD) - ${DIALOG} --title "DTD" \ - --hline "" \ - --hfile ${DOCDIR}/dtd.hlp \ - --checklist "${DTD}" -1 -1 2 \ - "HTML 2.0" "HTML 2.0" OFF \ - "HTML 3.2" "HTML 3.2" ON \ - 2> /tmp/checklist.tmp.$$ - dtd=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Strict) - ${DIALOG} --title "Strict HTML lexing" \ - --hline "" \ - --hfile ${DOCDIR}/strict_html_lexing.hlp \ - --checklist "${Strict_HTML_lexing}" -1 -1 1 \ - "0" "Strict HTML lexing" OFF \ - 2> /tmp/checklist.tmp.$$ - strict_html_lexing=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Tables) - ${DIALOG} --title "Attempt tables" \ - --hline "" \ - --hfile ${DOCDIR}/attempt_tables.hlp \ - --checklist "${Attempt_tables}" -1 -1 1 \ - "1" "Attempt tables" ON \ - 2> /tmp/checklist.tmp.$$ - attempt_tables=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Smooth) - ${DIALOG} --title "Attempt smooth scroll" \ - --hline "" \ - --hfile ${DOCDIR}/attempt_smooth_scroll.hlp \ - --checklist "${Attempt_smooth_scroll}" -1 -1 1 \ - "0" "Attempt smooth scroll" OFF \ - 2> /tmp/checklist.tmp.$$ - attempt_smooth_scroll=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - esac - done - answer=None - ;; - Images) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up Images" \ - --hline "Select Set up Items" \ - --menu "${Images}" -1 -1 6 \ - No "No images at all" \ - Loading "Image loading" \ - Max "Max image connections" \ - Gamma "Gamma correction" \ - Jpeg "JPEG Converter" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - No) - ${DIALOG} --title "No images at all" \ - --hline "" \ - --hfile ${DOCDIR}/no_images_at_all.hlp \ - --checklist "${No_images_at_all}" -1 -1 1 \ - "0" "No images at all" OFF \ - 2> /tmp/checklist.tmp.$$ - no_images_at_all=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Loading) - ${DIALOG} --title "Image loading" \ - --hline "" \ - --hfile ${DOCDIR}/image_loading.hlp \ - --checklist "${Image_loading}" -1 -1 3 \ - "After document, manual" "After document, manual" OFF \ - "After document, automatic" "After document, automatic" ON \ - "During document loading" "During document loading" OFF \ - 2> /tmp/checklist.tmp.$$ - image_loading=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Max) - if [ ! -z "${max_image_connections}" ]; then - ${DIALOG} --title "Confirm Max image connections" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/max_image_connections.hlp \ - --yesno "Max image connections has set \"${max_image_connections}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Max image connections" \ - --hline "Specify Max image connections" \ - --hfile ${DOCDIR}/max_image_connections.hlp \ - --inputbox "${Max_Image_Connections}" -1 -1 \ - 2> /tmp/input.tmp.$$ - max_image_connections=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Gamma) - if [ ! -z "${gamma_correction}" ]; then - ${DIALOG} --title "Confirm your Gamma correction" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/gamma_correction.hlp \ - --yesno "Gamma correction has set \"${gamma_correction}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Gamma correction" \ - --hline "Specify Gamma correction" \ - --hfile ${DOCDIR}/gamma_correction.hlp \ - --inputbox "${Gamma_Correction}" -1 -1 \ - 2> /tmp/input.tmp.$$ - gamma_correction=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Jpeg) - if [ ! -z "${jpeg_converter}" ]; then - ${DIALOG} --title "Confirm JPEG Converter" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/jpeg_converter.hlp \ - --yesno "Your JPEG Converter has set \"${jpeg_converter}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set JPEG Converter" \ - --hline "Specify JPEG Converter" \ - --hfile ${DOCDIR}/jpeg_converter.hlp \ - --inputbox "${JPEG_Converter}" -1 -1 \ - 2> /tmp/input.tmp.$$ - jpeg_converter=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac - done - answer=None - ;; - External) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up External Programs" \ - --hline "Select Set up Items" \ - --menu "${External_Programs}" -1 -1 3 \ - Mailto "Mailto program" \ - Hotlist "Hotlist program" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - Mailto) - if [ ! -z "${mailto_program}" ]; then - ${DIALOG} --title "Confirm Mailto program" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/mailto_program.hlp \ - --yesno "Mailto program has set \"${mailto_program}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Mailto program" \ - --hline "Specify Mailto program" \ - --hfile ${DOCDIR}/mailto_program.hlp \ - --inputbox "${Mailto_program}" -1 -1 \ - 2> /tmp/input.tmp.$$ - mailto_program=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Hotlist) - if [ ! -z "${hotlist_program}" ]; then - ${DIALOG} --title "Confirm Hotlist program" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/hotlist_program.hlp \ - --yesno "Your Hotlist program has set \"${hotlist_program}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Hotlist program" \ - --hline "Specify Hotlist program" \ - --hfile ${DOCDIR}/hotlist_program.hlp \ - --inputbox "${Hotlist_program}" -1 -1 \ - 2> /tmp/input.tmp.$$ - hotlist_program=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac - done - answer=None - ;; - Applets) - ${DIALOG} --title "MMM(0.40) Set up Applets" \ - --hline "" \ - --hfile ${DOCDIR}/applets.hlp \ - --checklist "${Applets}" -1 -1 2 \ - "Active" "Active" ON \ - "Paranoid" "Paranoid" OFF \ - 2> /tmp/checklist.tmp.$$ - applets=`cat /tmp/checklist.tmp.$$` - case ${applets} in - Active) active=1; paranoid=0; ;; - Paranoid) active=0; paranoid=1; ;; - esac - rm -f /tmp/checklist.tmp.$$ - ;; - Reconfirm) - echo "${Reconfirm}" | eval ${SEDCMD} > /tmp/textbox.tmp.$$ - ${DIALOG} --title "MMM(0.40) Reconfirm all settings" \ - --hline "" \ - --textbox /tmp/textbox.tmp.$$ 30 70 - rm -f /tmp/textbox.tmp.$$ - ;; - esac -done - -if [ ! -d ${HOME}/.mmm ]; then mkdir ${HOME}/.mmm; fi -if [ -f ${HOME}/.mmm/prefs ]; then - mv ${HOME}/.mmm/prefs ${HOME}/.mmm/prefs.$$ -fi -if [ ! -f ${HOME}/.mmm/MMM.ad ]; then - ${CP} ${LIBDIR}/MMM.ad ${HOME}/.mmm/MMM.ad -fi - -eval ${SEDCMD} < ${DOCDIR}/prefs > ${HOME}/.mmm/prefs diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/files/user-install.tmpl ./files/user-install.tmpl --- /usr/ports/current/ports/www/mmm/files/user-install.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/user-install.tmpl Sun Jun 1 15:17:11 1997 @@ -0,0 +1,656 @@ +#!/bin/sh + +PREFIX=%PREFIX% +LIBDIR=${PREFIX}/lib/mmm +SAMPLEDIR=%SAMPLEDIR% + +RM=%RM% +SED=%SED% +CP=%CP% +ECHO=%ECHO% +DIALOG=/usr/bin/dialog + +case ${TERM} in +emacs) + ${ECHO} "Here is \"Emacs\" shell. Try on other terminal." + exit 1 + ;; +esac + +MainMenu="This is a Set up Menu for specifying the MMM User environment \n\ +correctly. You must set at least your Proxy host name. Others are \n\ +supposed to be set \"Normal Values\". \n\ +\n\ +For more detail specifications click \"MMM\" on MMM, and then select \n\ +\"Preferences\". You should be notice to be overriden default preference \n\ +file \"~/.mmm/prefs\" by doing \"Preferences\" on MMM. Some of which \n\ +might be bad for FreeBSD. +\n\ +Please set your environment by selecting followng items." + +Protocols="Proxy host name, Proxy port, Always Use Proxy or not, \n\ +HTTP Send referer, User Agent, Timeout on headers, \n\ +Password lifetime, Password save file, Proxy port and \n\ +Local binaries path would be set.\n\ +\n\ +But if you use in default setting, only \"Proxy host name\" \n\ +MUST BE SET for your site." + +Proxy_host="Write your Proxy host name (Press F1 to Help)" + +Always_Use_Proxy="You always use proxy? (Press F1 to Help) \n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +HTTP_Send_referer="You adopt \"HTTP Send referer\"? (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +User_Agent="Specify your \"User Agent\"(Press F1 to Help)" + +Timeout_On_Headers="Specify Timeout on headers in seconds(Press F1 to Help)" + +Password_Lifetime="Specify Password lifetime in seconds (Press F1 to Help)" + +Password_Save_File="Specify Password save file (Press F1 to Help)" + +Local_Binaries_Path="Specify Local binaries path (Press F1 to Help)" + +HTML_parsing_and_display="DTD, Strict HTML lexing, Attempt tables and \n\ +Attempt smooth scroll would be set.\n\ +\n\ +But if you use in default setting, NOTHING should be done." + +DTD="Specify DTD (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +Strict_HTML_lexing="Strict HTML lexing? (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +Attempt_tables="Attempt tables? (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +Attempt_smooth_scroll="Attempt smooth scroll? (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +Images="Image loading, Max image connections, Gamma correction and \n\ +JPEG Converter would be set.\n\ +\n\ +But if you use in default setting, NOTHING should be done." + +No_images_at_all="No images at all? (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +Image_loading="Specify Image loading (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +Max_Image_Connections="Specify Max image connections (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +Gamma_Correction="Specify Gamma Correction (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +JPEG_Converter="Specify JPEG Converter (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +External_Programs="Mailto program and Hotlist program would be set.\n\ +\n\ +But if you use in default setting, NOTHING should be done." + +Mailto_program="Specify Mailto program (Press F1 to Help)" + +Hotlist_program="Specify Hotlist program (Press F1 to Help)" + +Applets="Specify Applets (Press F1 to Help)\n\ +Press SPACE \"ON\" or \"OFF\" toggled." + +proxy_host="" +proxy_port=80 +always_use_proxy=0 +http_send_referer=0 +user_agent="MMM/0.40" +timeout_on_headers=60 +password_lifetime=60 +password_save_file="" +local_binaries_path="" +dtd="HTML 3.2" +strict_html_lexing=0 +attempt_tables=1 +attempt_smooth_scroll=1 +no_images_at_all=0 +image_loading="After document, automatic" +max_image_connections=3 +gamma_correction=1 +jpeg_converter=djpeg +mailto_program="" +hotlist_program="surfboard_remote" +active=1 +paranoid=0 + +Reconfirm=' +Protocols + + Proxy host : "%proxy_host%" + + Proxy port : "%proxy_port%" + + Always Use Proxy : "%always_use_proxy%" + + HTTP Send referer : "%http_send_referer%" + + User Agent : "%user_agent%" + + Timeout on headers (seconds): "%timeout_on_headers%" + + Password lifetime (minutes) : "%password_lifetime%" + + Password save file : "%password_save_file%" + + Local binaries path : "%local_binaries_path%" + +HTML parsing and display + + DTD : "%dtd%" + + Strict HTML lexing : "%strict_html_lexing%" + + Attempt tables : "%attempt_tables%" + + Attempt smooth scroll : "%attempt_smooth_scroll%" + +Images + + No images at all : "%no_images_at_all%" + + Image loading : "%image_loading%" + + Max image connections : "%max_image_connections%" + + Gamma correction : "%gamma_correction%" + + JPEG Converter : "%jpeg_converter%" + +External Programs + + Mailto program : "%mailto_program%" + + Hotlist program : "%hotlist_program%" + +Applets + + Paranoid : "%paranoid%" + + Active : "%active%"' + +SEDCMD='${SED} -e "s@%proxy_host%@${proxy_host}@g" + -e "s@%proxy_port%@${proxy_port}@g" + -e "s@%always_use_proxy%@${always_use_proxy}@g" + -e "s@%http_send_referer%@${http_send_referer}@g" + -e "s@%user_agent%@${user_agent}@g" + -e "s@%timeout_on_headers%@${timeout_on_headers}@g" + -e "s@%password_lifetime%@${password_lifetime}@g" + -e "s@%password_save_file%@${password_save_file}@g" + -e "s@%local_binaries_path%@${local_binaries_path}@g" + -e "s@%dtd%@${dtd}@g" + -e "s@%strict_html_lexing%@${strict_html_lexing}@g" + -e "s@%attempt_tables%@${attempt_tables}@g" + -e "s@%attempt_smooth_scroll%@${attempt_smooth_scroll}@g" + -e "s@%no_images_at_all%@${no_images_at_all}@g" + -e "s@%image_loading%@${image_loading}@g" + -e "s@%max_image_connections%@${max_image_connections}@g" + -e "s@%gamma_correction%@${gamma_correction}@g" + -e "s@%jpeg_converter%@${jpeg_converter}@g" + -e "s@%mailto_program%@${mailto_program}@g" + -e "s@%hotlist_program%@${hotlist_program}@g" + -e "s@%active%@${active}@g" + -e "s@%paranoid%@${paranoid}@g"' + +answer=None + +while [ ! X"${answer}" = "XQuit" ]; do + ${DIALOG} --title "MMM(0.40) Set up User Environment" \ + --hline "Select Set up Items" \ + --menu "${MainMenu}" -1 -1 7 \ + Protocols "Proxy host,HTTP Send referer,Password,..." \ + HTML "HTML parsing and display" \ + Images "Image loading,JPEG Converter,..." \ + External "External Programs(Mail and Hotlist)" \ + Applets "Applets(Active or Paranoid)" \ + Reconfirm "Reconfirm all settings" \ + Quit "Quit this menu" \ + 2> /tmp/menu.tmp.$$ + retval=$? + answer=`cat /tmp/menu.tmp.$$` + ${RM} -f /tmp/menu.tmp.$$ + case $retval in + 0) if [ -z ${answer} ]; then + ${ECHO} "Nothing selected" + exit 1 + fi + ;; + 1) ${ECHO} "Cancel pressed." + exit 1 + ;; + 255) ${ECHO} "ESC pressed." + exit 1 + ;; + esac + case ${answer} in + Protocols) + answer=None + while [ ! X"${answer}" = "XQuit" ]; do + ${DIALOG} --title "MMM(0.40) Set up Protocols" \ + --hline "Select Set up Items" \ + --menu "${Protocols}" -1 -1 10 \ + Host "Proxy host name" \ + Port "Proxy port number" \ + Always "Always Use Proxy or not" \ + Referer "HTTP Send referer or not" \ + User "User Agent" \ + Timeout "Timeout on headers (seconds)" \ + Life "Password lifetime (minutes)" \ + Save "Password save file" \ + Binary "Local binaries path" \ + Quit "Quit this menu" \ + 2> /tmp/menu.tmp.$$ + retval=$? + answer=`cat /tmp/menu.tmp.$$` + ${RM} -f /tmp/menu.tmp.$$ + if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi + case ${answer} in + Host) + if [ ! -z "${proxy_host}" ]; then + ${DIALOG} --title "Confirm your Proxy host name" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/proxy_host.hlp \ + --yesno "Your Proxy host name has set \"${proxy_host}\". Is +this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Your Proxy host name" \ + --hline "Write your Proxy host name" \ + --hfile ${SAMPLEDIR}/proxy_host.hlp \ + --inputbox "${Proxy_host}" -1 -1 \ + 2> /tmp/input.tmp.$$ + proxy_host=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Port) + if [ ! -z "${proxy_port}" ]; then + ${DIALOG} --title "Confirm your Proxy port number" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/proxy_port.hlp \ + --yesno "Your Proxy port number has set \"${proxy_port}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Your Proxy port number" \ + --hline "Put your Proxy port number" \ + --hfile ${SAMPLEDIR}/proxy_port.hlp \ + --inputbox "${Proxy_port}" -1 -1 \ + 2> /tmp/input.tmp.$$ + proxy_port=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Always) + ${DIALOG} --title "Always Use Proxy" \ + --hline "" \ + --hfile ${SAMPLEDIR}/always_use_proxy.hlp \ + --checklist "${Always_Use_Proxy}" -1 -1 1 \ + "1" "Always Use Proxy" OFF \ + 2> /tmp/checklist.tmp.$$ + always_use_proxy=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + Referer) + ${DIALOG} --title "HTTP Send referer" \ + --hline "" \ + --hfile ${SAMPLEDIR}/http_send_refer.hlp \ + --checklist "${HTTP_Send_referer}" -1 -1 1 \ + "1" "Set HTTP Send referer" OFF \ + 2> /tmp/checklist.tmp.$$ + http_send_referer=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + User) + if [ ! -z "${user_agent}" ]; then + ${DIALOG} --title "Confirm your User Agent" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/user_agent.hlp \ + --yesno "Your User Agent has set \"${user_agent}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Your User Agent" \ + --hline "Write your User Agent" \ + --hfile ${SAMPLEDIR}/user_agent.hlp \ + --inputbox "${User_Agent}" -1 -1 \ + 2> /tmp/input.tmp.$$ + user_agent=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Timeout) + if [ ! -z "${timeout_on_headers}" ]; then + ${DIALOG} --title "Confirm Timeout on headers (seconds)" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/timeout_on_headers.hlp \ + --yesno "Timeout on headers (seconds) has set \"${timeout_on_headers}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Timeout on headers (seconds)" \ + --hline "Write Timeout on headers (seconds)" \ + --hfile ${SAMPLEDIR}/timeout_on_headers.hlp \ + --inputbox "${Timeout_On_Headers}" -1 -1 \ + 2> /tmp/input.tmp.$$ + timeout_on_headers=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Life) + if [ ! -z "${password_lifetime}" ]; then + ${DIALOG} --title "Confirm your Password lifetime (minutes)" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/password_lifetime.hlp \ + --yesno "Your Password lifetime (minutes) has set \"${password_lifetime}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Your Password lifetime (minutes)" \ + --hline "Write your Password lifetime (minutes)" \ + --hfile ${SAMPLEDIR}/password_lifetime.hlp \ + --inputbox "${Password_Lifetime}" -1 -1 \ + 2> /tmp/input.tmp.$$ + password_lifetime=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Save) + if [ ! -z "${password_save_file}" ]; then + ${DIALOG} --title "Confirm your Password save file" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/password_save_file.hlp \ + --yesno "Your Password save file has set \"${password_save_file}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Your Password save file" \ + --hline "Write your Password save file" \ + --hfile ${SAMPLEDIR}/password_lifetime.hlp \ + --inputbox "${Password_Save_File}" -1 -1 \ + 2> /tmp/input.tmp.$$ + password_save_file=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Binary) + if [ ! -z "${local_binaries_path}" ]; then + ${DIALOG} --title "Confirm your Local binaries path" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/local_binaries_path.hlp \ + --yesno "Your Local binaries path has set \"${local_binaries_path}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Your Local binaries path" \ + --hline "Write your Local binaries path" \ + --hfile ${SAMPLEDIR}/local_binaries_path.hlp \ + --inputbox "${Local_Binaries_Path}" -1 -1 \ + 2> /tmp/input.tmp.$$ + local_binaries_path=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + esac + done + answer=None + ;; + HTML) + answer=None + while [ ! X"${answer}" = "XQuit" ]; do + ${DIALOG} --title "MMM(0.40) Set up HTML parsing and display" \ + --hline "Select Set up Items" \ + --menu "${HTML_parsing_and_display}" -1 -1 5 \ + DTD "HTML code difinition" \ + Strict "Strict HTML lexing" \ + Tables "Attempt tables" \ + Smooth "Attempt smooth scroll" \ + Quit "Quit this menu" \ + 2> /tmp/menu.tmp.$$ + retval=$? + answer=`cat /tmp/menu.tmp.$$` + ${RM} -f /tmp/menu.tmp.$$ + if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi + case ${answer} in + DTD) + ${DIALOG} --title "DTD" \ + --hline "" \ + --hfile ${SAMPLEDIR}/dtd.hlp \ + --checklist "${DTD}" -1 -1 2 \ + "HTML 2.0" "HTML 2.0" OFF \ + "HTML 3.2" "HTML 3.2" ON \ + 2> /tmp/checklist.tmp.$$ + dtd=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + Strict) + ${DIALOG} --title "Strict HTML lexing" \ + --hline "" \ + --hfile ${SAMPLEDIR}/strict_html_lexing.hlp \ + --checklist "${Strict_HTML_lexing}" -1 -1 1 \ + "0" "Strict HTML lexing" OFF \ + 2> /tmp/checklist.tmp.$$ + strict_html_lexing=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + Tables) + ${DIALOG} --title "Attempt tables" \ + --hline "" \ + --hfile ${SAMPLEDIR}/attempt_tables.hlp \ + --checklist "${Attempt_tables}" -1 -1 1 \ + "1" "Attempt tables" ON \ + 2> /tmp/checklist.tmp.$$ + attempt_tables=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + Smooth) + ${DIALOG} --title "Attempt smooth scroll" \ + --hline "" \ + --hfile ${SAMPLEDIR}/attempt_smooth_scroll.hlp \ + --checklist "${Attempt_smooth_scroll}" -1 -1 1 \ + "0" "Attempt smooth scroll" OFF \ + 2> /tmp/checklist.tmp.$$ + attempt_smooth_scroll=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + esac + done + answer=None + ;; + Images) + answer=None + while [ ! X"${answer}" = "XQuit" ]; do + ${DIALOG} --title "MMM(0.40) Set up Images" \ + --hline "Select Set up Items" \ + --menu "${Images}" -1 -1 6 \ + No "No images at all" \ + Loading "Image loading" \ + Max "Max image connections" \ + Gamma "Gamma correction" \ + Jpeg "JPEG Converter" \ + Quit "Quit this menu" \ + 2> /tmp/menu.tmp.$$ + retval=$? + answer=`cat /tmp/menu.tmp.$$` + ${RM} -f /tmp/menu.tmp.$$ + if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi + case ${answer} in + No) + ${DIALOG} --title "No images at all" \ + --hline "" \ + --hfile ${SAMPLEDIR}/no_images_at_all.hlp \ + --checklist "${No_images_at_all}" -1 -1 1 \ + "0" "No images at all" OFF \ + 2> /tmp/checklist.tmp.$$ + no_images_at_all=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + Loading) + ${DIALOG} --title "Image loading" \ + --hline "" \ + --hfile ${SAMPLEDIR}/image_loading.hlp \ + --checklist "${Image_loading}" -1 -1 3 \ + "After document, manual" "After document, manual" OFF \ + "After document, automatic" "After document, automatic" ON \ + "During document loading" "During document loading" OFF \ + 2> /tmp/checklist.tmp.$$ + image_loading=`cat /tmp/checklist.tmp.$$` + ${RM} -f /tmp/checklist.tmp.$$ + ;; + Max) + if [ ! -z "${max_image_connections}" ]; then + ${DIALOG} --title "Confirm Max image connections" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/max_image_connections.hlp \ + --yesno "Max image connections has set \"${max_image_connections}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Max image connections" \ + --hline "Specify Max image connections" \ + --hfile ${SAMPLEDIR}/max_image_connections.hlp \ + --inputbox "${Max_Image_Connections}" -1 -1 \ + 2> /tmp/input.tmp.$$ + max_image_connections=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Gamma) + if [ ! -z "${gamma_correction}" ]; then + ${DIALOG} --title "Confirm your Gamma correction" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/gamma_correction.hlp \ + --yesno "Gamma correction has set \"${gamma_correction}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Gamma correction" \ + --hline "Specify Gamma correction" \ + --hfile ${SAMPLEDIR}/gamma_correction.hlp \ + --inputbox "${Gamma_Correction}" -1 -1 \ + 2> /tmp/input.tmp.$$ + gamma_correction=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Jpeg) + if [ ! -z "${jpeg_converter}" ]; then + ${DIALOG} --title "Confirm JPEG Converter" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/jpeg_converter.hlp \ + --yesno "Your JPEG Converter has set \"${jpeg_converter}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set JPEG Converter" \ + --hline "Specify JPEG Converter" \ + --hfile ${SAMPLEDIR}/jpeg_converter.hlp \ + --inputbox "${JPEG_Converter}" -1 -1 \ + 2> /tmp/input.tmp.$$ + jpeg_converter=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + esac + done + answer=None + ;; + External) + answer=None + while [ ! X"${answer}" = "XQuit" ]; do + ${DIALOG} --title "MMM(0.40) Set up External Programs" \ + --hline "Select Set up Items" \ + --menu "${External_Programs}" -1 -1 3 \ + Mailto "Mailto program" \ + Hotlist "Hotlist program" \ + Quit "Quit this menu" \ + 2> /tmp/menu.tmp.$$ + retval=$? + answer=`cat /tmp/menu.tmp.$$` + ${RM} -f /tmp/menu.tmp.$$ + if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi + case ${answer} in + Mailto) + if [ ! -z "${mailto_program}" ]; then + ${DIALOG} --title "Confirm Mailto program" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/mailto_program.hlp \ + --yesno "Mailto program has set \"${mailto_program}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Mailto program" \ + --hline "Specify Mailto program" \ + --hfile ${SAMPLEDIR}/mailto_program.hlp \ + --inputbox "${Mailto_program}" -1 -1 \ + 2> /tmp/input.tmp.$$ + mailto_program=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + Hotlist) + if [ ! -z "${hotlist_program}" ]; then + ${DIALOG} --title "Confirm Hotlist program" \ + --hline "Press Yes/No" \ + --hfile ${SAMPLEDIR}/hotlist_program.hlp \ + --yesno "Your Hotlist program has set \"${hotlist_program}\". Is this OK?\n(Press F1 to Help)" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Hotlist program" \ + --hline "Specify Hotlist program" \ + --hfile ${SAMPLEDIR}/hotlist_program.hlp \ + --inputbox "${Hotlist_program}" -1 -1 \ + 2> /tmp/input.tmp.$$ + hotlist_program=`cat /tmp/input.tmp.$$` + ${RM} -f /tmp/input.tmp.$$ + ;; + esac + done + answer=None + ;; + Applets) + ${DIALOG} --title "MMM(0.40) Set up Applets" \ + --hline "" \ + --hfile ${SAMPLEDIR}/applets.hlp \ + --checklist "${Applets}" -1 -1 2 \ + "Active" "Active" ON \ + "Paranoid" "Paranoid" OFF \ + 2> /tmp/checklist.tmp.$$ + applets=`cat /tmp/checklist.tmp.$$` + case ${applets} in + Active) active=1; paranoid=0; ;; + Paranoid) active=0; paranoid=1; ;; + esac + ${RM} -f /tmp/checklist.tmp.$$ + ;; + Reconfirm) + ${ECHO} "${Reconfirm}" | eval ${SEDCMD} > /tmp/textbox.tmp.$$ + ${DIALOG} --title "MMM(0.40) Reconfirm all settings" \ + --hline "" \ + --textbox /tmp/textbox.tmp.$$ 30 70 + ${RM} -f /tmp/textbox.tmp.$$ + ;; + esac +done + +if [ ! -d ${HOME}/.mmm ]; then mkdir ${HOME}/.mmm; fi +if [ -f ${HOME}/.mmm/prefs ]; then + mv ${HOME}/.mmm/prefs ${HOME}/.mmm/prefs.$$ +fi +if [ ! -f ${HOME}/.mmm/MMM.ad ]; then + ${CP} ${LIBDIR}/%MMMAD% ${HOME}/.mmm/MMM.ad +fi +if [ ! -f ${HOME}/.mmm/surfboard.html ]; then + if [ -f ${HOME}/.netscape/surfboard.html ]; then + ${CP} ${HOME}/.netscape/surfboard.html ${HOME}/.mmm + else + name=`whoami` + name=`awk -v name=${name} 'BEGIN{FS=":"}$1==name{print $5}' /etc/passwd` + ${SED} -e "s:%user_name%:${name}:g" \ + < ${SAMPLEDIR}/surfboard.html > ${HOME}/.mmm/surfboard.html + fi +fi + +eval ${SEDCMD} < ${SAMPLEDIR}/prefs > ${HOME}/.mmm/prefs diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/patches/patch-ab ./patches/patch-ab --- /usr/ports/current/ports/www/mmm/patches/patch-ab Mon Jan 6 23:18:54 1997 +++ ./patches/patch-ab Sun Jun 1 12:49:05 1997 @@ -1,6 +1,6 @@ ---- Makefile Mon Dec 2 22:15:01 1996 -+++ Makefile Mon Dec 23 19:10:20 1996 -@@ -168,15 +172,15 @@ +--- Makefile~ Sun Jun 1 12:42:06 1997 ++++ Makefile Sun Jun 1 12:47:43 1997 +@@ -169,15 +169,15 @@ install: mmm htparse mmm_remote [ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR) diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/pkg/COMMENT ./pkg/COMMENT --- /usr/ports/current/ports/www/mmm/pkg/COMMENT Fri Jan 3 21:31:02 1997 +++ ./pkg/COMMENT Sun Jun 1 11:33:48 1997 @@ -1 +1 @@ -WWW browser using Objective Caml, Tcl7.5 and Tk4.1. +WWW browser using Objective Caml, Tcl/Tk. diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/pkg/DESCR ./pkg/DESCR --- /usr/ports/current/ports/www/mmm/pkg/DESCR Mon Jan 6 23:18:55 1997 +++ ./pkg/DESCR Thu Jun 5 17:04:32 1997 @@ -27,13 +27,15 @@ % /usr/local/share/examples/mmm/user-install -While various custumization might be available, only "Proxy host name" +While various customization might be available, only "Proxy host name" should be set if you use in default setting. After site installation, you may be get start MMM. Just type % mmm -MMM will take up default MMM home page. +MMM will take up default MMM home page. If you want to use Netsacpe +like bookmark tool(called "Surfboad"),start up "surfboard" first and +then get start "mmm" with the "-external" option. Documentation and other information: ==================================== diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/pkg/MESSAGE ./pkg/MESSAGE --- /usr/ports/current/ports/www/mmm/pkg/MESSAGE Sat May 24 16:49:29 1997 +++ ./pkg/MESSAGE Sun Jun 1 11:33:48 1997 @@ -1,6 +1,6 @@ ************************************************************************* * * -* >>> Congraturation !!! MMM successfully installed! <<< * +* >>> Congratuation !!! MMM successfully installed! <<< * * * * MMM successfully installed on your site. But you should be set up * * your user environment. You can do this in control panel in MMM by * diff -urN --exclude=CVS /usr/ports/current/ports/www/mmm/pkg/PLIST ./pkg/PLIST --- /usr/ports/current/ports/www/mmm/pkg/PLIST Mon Jan 6 23:18:55 1997 +++ ./pkg/PLIST Sun Jun 1 14:57:28 1997 @@ -1,4 +1,6 @@ bin/mmm +bin/surfboard +bin/surfboard_remote lib/mmm/JMMM.ad lib/mmm/MMM.ad lib/mmm/htparse @@ -41,3 +43,8 @@ share/examples/mmm/timeout_on_headers.hlp share/examples/mmm/user-install share/examples/mmm/user_agent.hlp +share/examples/mmm/surfboard.html +@dirrm lib/mmm/mdk +@dirrm lib/mmm +@dirrm share/doc/mmm +@dirrm share/examples/mmm >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 04:10:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08229 for ports-outgoing; Thu, 5 Jun 1997 04:10:08 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08209; Thu, 5 Jun 1997 04:10:03 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 04:10:03 -0700 (PDT) Resent-Message-Id: <199706051110.EAA08209@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, kiri@kiri.toba-cmt.ac.jp Received: from kiri.toba-cmt.ac.jp (kiri.toba-cmt.ac.jp [202.26.248.91]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA07783 for ; Thu, 5 Jun 1997 03:59:33 -0700 (PDT) Received: (from kiri@localhost) by kiri.toba-cmt.ac.jp (8.8.5/8.8.5) id UAA18138; Thu, 5 Jun 1997 20:03:45 +0900 (JST) Message-Id: <199706051103.UAA18138@kiri.toba-cmt.ac.jp> Date: Thu, 5 Jun 1997 20:03:45 +0900 (JST) From: Kazuhiko Kiriyama(System administrator) Reply-To: kiri@kiri.toba-cmt.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3792: Update port jp-mmm-0.40 (japanese/mmm). Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3792 >Category: ports >Synopsis: Update port jp-mmm-0.40 (japanese/mmm). >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 04:10:01 PDT 1997 >Last-Modified: >Originator: Kazuhiko Kiriyama >Organization: Toba National College of Maritime Technology. Department of Electronic Mechanical Engineering >Release: FreeBSD 2.2.2-RELEASE i386 >Environment: >Description: I've updated the port jp-mmm-0.40 (japanese/mmm). Current modifications is (1) Change dir installation with install-info. (2) Slave to www/mmm. Delete and Update files are respecively [Delete] : files/ (Whole directory) files/always_use_proxy.hlp files/applets.hlp files/attempt_smooth_scroll.hlp files/attempt_tables.hlp files/dtd.hlp files/gamma_correction.hlp files/hotlist_program.hlp files/http_send_refer.hlp files/image_loading.hlp files/jpeg_converter.hlp files/local_binaries_path.hlp files/mailto_program.hlp files/max_image_connections.hlp files/md5 files/no_images_at_all.hlp files/password_lifetime.hlp files/prefs files/proxy_host.hlp files/proxy_port.hlp files/strict_html_lexing.hlp files/timeout_on_headers.hlp files/user-install files/user_agent.hlp pkg/ (Whole directory) pkg/COMMENT pkg/DESCR pkg/MESSAGE pkg/PLIST [Update] : Makefile patches/patch-ab I put the diff from ports-current(japanese/mmm) in "Fix:". >How-To-Repeat: >Fix: diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/Makefile ./Makefile --- ../../current/ports/japanese/mmm/Makefile Mon Mar 3 17:30:29 1997 +++ ./Makefile Sun Jun 1 12:17:17 1997 @@ -6,45 +6,18 @@ # $Id: Makefile,v 1.4 1997/03/02 13:19:23 asami Exp $ # -DISTNAME= mmm-0.40 PKGNAME= jp-mmm-0.40 CATEGORIES= www japanese -MASTER_SITES= ftp://ftp.kurims.kyoto-u.ac.jp/pub/lang/mmm/ \ - ftp://ftp.inria.fr/INRIA/Projects/cristal/Francois.Rouaix/mmm/ -DISTFILES= mmm40-src.tar.gz -MAINTAINER= kiri@kiri.toba-cmt.ac.jp +FILESDIR= ${.CURDIR}/../../www/mmm/files +PKGDIR= ${.CURDIR}/../../www/mmm/pkg LIB_DEPENDS= tcl76jp\\.:${PORTSDIR}/japanese/tcl76 \ tk42jp\\.:${PORTSDIR}/japanese/tk42 BUILD_DEPENDS= ocaml:${PORTSDIR}/lang/ocaml \ ${PREFIX}/lib/ocaml/camltk41/libcamltk41.a:${PORTSDIR}/japanese/camltk41 -WRKSRC= ${WRKDIR}/mmm -USE_GMAKE= yes -INSTALL_TARGET= install install-mdk -MAKE_ENV+= INSTALL_DATA="${INSTALL_DATA}" \ - INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ - INSTALL_PROGRAM="${INSTALL_SCRIPT}" +MMMAD= JMMM.ad +JAPANESEMODE= 1 -DOCDIR= ${PREFIX}/share/doc/mmm -SAMPLEDIR= ${PREFIX}/share/examples/mmm - -post-install: -.if !defined(NOPORTDOCS) - @${MKDIR} ${DOCDIR} - @${MKDIR} ${SAMPLEDIR} - @${INSTALL_DATA} ${FILESDIR}/prefs ${SAMPLEDIR} - @${INSTALL_DATA} ${WRKSRC}/INSTALL ${DOCDIR} -.for f in always_use_proxy applets mailto_program attempt_smooth_scroll \ - max_image_connections attempt_tables no_images_at_all dtd \ - password_lifetime gamma_correction proxy_host hotlist_program \ - proxy_port http_send_refer local_binaries_path strict_html_lexing \ - image_loading timeout_on_headers jpeg_converter user_agent - @${INSTALL_DATA} ${FILESDIR}/${f}.hlp ${SAMPLEDIR} -.endfor - @${INSTALL_SCRIPT} ${FILESDIR}/user-install ${SAMPLEDIR} -.endif - @${CAT} ${PKGDIR}/MESSAGE - -.include +.include "${.CURDIR}/../../www/mmm/Makefile" diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/always_use_proxy.hlp ./files/always_use_proxy.hlp --- ../../current/ports/japanese/mmm/files/always_use_proxy.hlp Fri Jan 3 21:22:02 1997 +++ ./files/always_use_proxy.hlp Thu Jan 1 09:00:00 1970 @@ -1,4 +0,0 @@ -If set, MMM will never try a direct connection to an http server. This -option is intended for use when DNS requests are slow (e.g. you are -behind a PPP line). Also, you will benefit from your proxy's caching -facilities, if available. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/applets.hlp ./files/applets.hlp --- ../../current/ports/japanese/mmm/files/applets.hlp Fri Jan 3 21:22:01 1997 +++ ./files/applets.hlp Thu Jan 1 09:00:00 1970 @@ -1,7 +0,0 @@ -Active - Do we actually want to load applets. - -Paranoid - In paranoid mode, the access rights of an applet have to be asked each - time, whereas in normal mode, an access right granted once will be - granted again without user confirmation. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/attempt_smooth_scroll.hlp ./files/attempt_smooth_scroll.hlp --- ../../current/ports/japanese/mmm/files/attempt_smooth_scroll.hlp Fri Jan 3 21:22:02 1997 +++ ./files/attempt_smooth_scroll.hlp Thu Jan 1 09:00:00 1970 @@ -1,4 +0,0 @@ -Due to a Tk limitation, the browser does not scroll properly on a -document containing large in-lined images or tables. The preference -enables a hack for smooth scrolling, but at the cost of display speed -for large documents. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/attempt_tables.hlp ./files/attempt_tables.hlp --- ../../current/ports/japanese/mmm/files/attempt_tables.hlp Fri Jan 3 21:22:02 1997 +++ ./files/attempt_tables.hlp Thu Jan 1 09:00:00 1970 @@ -1,3 +0,0 @@ -By default, tables introduced by are not displayed (i.e., their -content is displayed as items of lists). This preference enables the -display of tables, but it is bogus diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/dtd.hlp ./files/dtd.hlp --- ../../current/ports/japanese/mmm/files/dtd.hlp Fri Jan 3 21:22:01 1997 +++ ./files/dtd.hlp Thu Jan 1 09:00:00 1970 @@ -1,3 +0,0 @@ -You may choose between 2.0 and 3.2. This choice only influences the -error messages, but all HTML elements recognized by the HTML display -machine will still be interpreted, even if they don't belong to the DTD. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/gamma_correction.hlp ./files/gamma_correction.hlp --- ../../current/ports/japanese/mmm/files/gamma_correction.hlp Fri Jan 3 21:22:02 1997 +++ ./files/gamma_correction.hlp Thu Jan 1 09:00:00 1970 @@ -1 +0,0 @@ -Gamma correction ! Thanks to Tk. Affects only later image loading. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/hotlist_program.hlp ./files/hotlist_program.hlp --- ../../current/ports/japanese/mmm/files/hotlist_program.hlp Fri Jan 3 21:22:01 1997 +++ ./files/hotlist_program.hlp Thu Jan 1 09:00:00 1970 @@ -1,11 +0,0 @@ -If specified, the hotlist external program must obey the following API - - - $ external_program url title - -There are several hotlist managers out there. Here is an incredibly -gross one - - - #!/bin/sh - echo "$2
" >> $HOME/.hotlist.html diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/http_send_refer.hlp ./files/http_send_refer.hlp --- ../../current/ports/japanese/mmm/files/http_send_refer.hlp Fri Jan 3 21:22:02 1997 +++ ./files/http_send_refer.hlp Thu Jan 1 09:00:00 1970 @@ -1,7 +0,0 @@ -When this option is set, a connection to a Web server for a certain -request will tell this server what the context of the request is (using -the so-called Referer: field). For example, if you click on an anchor in -an HTML document, the context of the request is the URL of the document. -By setting this option, you may help server managers trace invalid -pointers to their pages in other people pages, but you also tell them -where you come from. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/image_loading.hlp ./files/image_loading.hlp --- ../../current/ports/japanese/mmm/files/image_loading.hlp Fri Jan 3 21:22:01 1997 +++ ./files/image_loading.hlp Thu Jan 1 09:00:00 1970 @@ -1,16 +0,0 @@ -There is a choice among three image loading strategies. - - After document, manual - You have to click on the Load Images button to retrieve and display - in-lined images. However, images in the cache will still be - displayed automatically - - After document, automatic - Images will be retrieved and displayed automatically after the whole - document has been displayed - - During document loading - In-line images will be requested and displayed when they are - encountered in the document. The image will actually be displayed - only when retrieved, thus it is not completely synchronous - diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/jpeg_converter.hlp ./files/jpeg_converter.hlp --- ../../current/ports/japanese/mmm/files/jpeg_converter.hlp Fri Jan 3 21:22:02 1997 +++ ./files/jpeg_converter.hlp Thu Jan 1 09:00:00 1970 @@ -1,4 +0,0 @@ -Temporary hack to diplay in-line images. MMM requires a JPEG converter -that outputs an image in a format that Tk 4.0 can load. Default is -djpeg. The converter will be called with one argument (the JPEG file), -and must output the converted image on its standard output. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/local_binaries_path.hlp ./files/local_binaries_path.hlp --- ../../current/ports/japanese/mmm/files/local_binaries_path.hlp Fri Jan 3 21:22:02 1997 +++ ./files/local_binaries_path.hlp Thu Jan 1 09:00:00 1970 @@ -1,19 +0,0 @@ -This entry (if defined) contains the path of a directory -(/the/path/of/the/directory) where local binaries resides. file: URLs -pointing in this directory will invoke such a binary, passing as -argument the searchpart of the URL, that is everything following the -character ? in the URL. -The external program should return full headers, like an HTTP server -would. For example, a simple shell script in this directory would look -like - - - #!/bin/sh - echo "HTTP/1.0 200 Found" - echo "Content-Type: text/html" - echo - cat << EOF - ... some valid HTML ... - EOF - -In CGI terminology, this is callsd NPH (non-parsed headers) CGI. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/mailto_program.hlp ./files/mailto_program.hlp --- ../../current/ports/japanese/mmm/files/mailto_program.hlp Fri Jan 3 21:22:01 1997 +++ ./files/mailto_program.hlp Thu Jan 1 09:00:00 1970 @@ -1,13 +0,0 @@ -If left unspecified, MMM pops up a window for composing a simple -message. The message will be send using the Un*x mail command. Thus, -beware of ~ characters at the beginning of a mail, as well as single dot -character on a line. - -To use one's favorite mailer, it is possible to specify an external -program that must obey the following API - - - $ external_program -s
- -Some examples are given here. - diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/max_image_connections.hlp ./files/max_image_connections.hlp --- ../../current/ports/japanese/mmm/files/max_image_connections.hlp Fri Jan 3 21:22:01 1997 +++ ./files/max_image_connections.hlp Thu Jan 1 09:00:00 1970 @@ -1,5 +0,0 @@ -Limit of the number of simultaneous connections dedicated to image -retrieval. I have heard that a value greater than 4 will trigger bugs in -TCP protocol implementation and thus actually slower image transfers. In -any case, a large value will put more burden on servers, and probably -diminish the overall response time. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/md5 ./files/md5 --- ../../current/ports/japanese/mmm/files/md5 Fri Jan 3 21:22:01 1997 +++ ./files/md5 Thu Jan 1 09:00:00 1970 @@ -1 +0,0 @@ -MD5 (mmm40-src.tar.gz) = c668c559457917f5a30777eb83e47764 diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/no_images_at_all.hlp ./files/no_images_at_all.hlp --- ../../current/ports/japanese/mmm/files/no_images_at_all.hlp Fri Jan 3 21:22:01 1997 +++ ./files/no_images_at_all.hlp Thu Jan 1 09:00:00 1970 @@ -1 +0,0 @@ -In-lined images will never be displayed. Useful when behind a PPP link. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/password_lifetime.hlp ./files/password_lifetime.hlp --- ../../current/ports/japanese/mmm/files/password_lifetime.hlp Fri Jan 3 21:22:02 1997 +++ ./files/password_lifetime.hlp Thu Jan 1 09:00:00 1970 @@ -1,3 +0,0 @@ -MMM implements password expiration. After the given amount of minutes, -MMM will erase expired passord from memory. MMM can also save passwords -to file (see menus). diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/prefs ./files/prefs --- ../../current/ports/japanese/mmm/files/prefs Mon Mar 3 17:30:30 1997 +++ ./files/prefs Thu Jan 1 09:00:00 1970 @@ -1,51 +0,0 @@ -Paranoid:%paranoid% -Text fit debug:0 -Active:%active% -Bold:-*-*-bold-*-normal-*-*-*-*-*-*-*-iso8859-1 -Password lifetime (minutes):%password_lifetime% -

font:-*-helvetica-bold-r-normal-*-14-*-*-*-*-*-iso8859-1 -Mailto program:%mailto_program% -Password save file:%password_save_file% -Max cached widgets per window:5 -HTML Display log:0 -Italic:-*-*-*-o-normal-*-*-*-*-*-*-*-iso8859-1 -Proxy host:%proxy_host% -Gamma correction:%gamma_correction% -Keep only history:0 -DTD:%dtd% -User Agent:%user_agent% -

font:-*-helvetica-medium-o-normal-*-14-*-*-*-*-*-iso8859-1 -General trace:0 -Attempt smooth scroll:%attempt_smooth_scroll% -Max number of documents:30 -Always Use Proxy:%always_use_proxy% -Local binaries path:%local_binaries_path% -
font:-*-helvetica-bold-r-normal-*-14-*-*-*-*-*-iso8859-1 -Cache debug:0 -Proxy port:%proxy_port% -No images at all:%no_images_at_all% -CamlTk Debug:0 -HTTP Send Referer:%http_send_referer% -Max image connections:3 -Attempt tables:%attempt_tables% -Use balloon helps:1 -Follow document colors:1 -

font:-*-helvetica-bold-r-normal-*-24-*-*-*-*-*-iso8859-1 -Timeout on headers (seconds):%timeout_on_headers% -Automatic GIF animation display:1 -Use GIF animation:0 -Fixed:-*-courier-*-*-normal-*-*-*-*-*-*-*-iso8859-1 -Background color:white -Strict HTML lexing:%strict_html_lexing% -Widget Cache debug:0 -JPEG converter:%jpeg_converter% -

font:-*-helvetica-bold-r-normal-*-18-*-*-*-*-*-iso8859-1 -Japanese mode:1 -HTML Lexical errors:0 -Table debug:0 -HTTP Requests:0 -Image loading:%image_loading% -Default font:-*-helvetica-medium-r-normal-*-14-*-*-*-*-*-iso8859-1 -Hotlist program:%hotlist_program% -

font:-*-helvetica-medium-o-normal-*-18-*-*-*-*-*-iso8859-1 -Delete how much when full:5 diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/proxy_host.hlp ./files/proxy_host.hlp --- ../../current/ports/japanese/mmm/files/proxy_host.hlp Fri Jan 3 21:22:02 1997 +++ ./files/proxy_host.hlp Thu Jan 1 09:00:00 1970 @@ -1,4 +0,0 @@ -This is the name of the host to be used as proxy for protocols that MMM -does not implement (ftp:, wais:, gopher: mainly). Also, the proxy will -be used for the http: protocol to contact host that cannot be reached -directly. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/proxy_port.hlp ./files/proxy_port.hlp --- ../../current/ports/japanese/mmm/files/proxy_port.hlp Fri Jan 3 21:22:02 1997 +++ ./files/proxy_port.hlp Thu Jan 1 09:00:00 1970 @@ -1 +0,0 @@ -The port number to contact the proxy. Usually 80. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/strict_html_lexing.hlp ./files/strict_html_lexing.hlp --- ../../current/ports/japanese/mmm/files/strict_html_lexing.hlp Fri Jan 3 21:22:02 1997 +++ ./files/strict_html_lexing.hlp Thu Jan 1 09:00:00 1970 @@ -1,2 +0,0 @@ -The HTML lexer will be less lenient, and consider for example that a tag -attribute ADD_DATE is invalid because is contains the character _. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/timeout_on_headers.hlp ./files/timeout_on_headers.hlp --- ../../current/ports/japanese/mmm/files/timeout_on_headers.hlp Fri Jan 3 21:22:02 1997 +++ ./files/timeout_on_headers.hlp Thu Jan 1 09:00:00 1970 @@ -1,5 +0,0 @@ -When the network is slow, it may take a long time before a server -returns the document headers. When the timeout is reached, a window pops -up and allows to Retry (for the same timeout duration), Abort (forget -about this connexion), Ignore (wait for this connexion, ignoring -timeouts). diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/user-install ./files/user-install --- ../../current/ports/japanese/mmm/files/user-install Mon Jan 6 23:30:53 1997 +++ ./files/user-install Thu Jan 1 09:00:00 1970 @@ -1,644 +0,0 @@ -#!/bin/sh - -PREFIX=/usr/local -LIBDIR=${PREFIX}/lib/mmm -DOCDIR=${PREFIX}/share/examples/mmm - -SED=/usr/bin/sed -CP=/bin/cp -DIALOG=/usr/bin/dialog - -case ${TERM} in -emacs) - echo "Here is \"Emacs\" shell. Try on other terminal." - exit 1 - ;; -esac - -MainMenu="This is a Set up Menu for specifying the MMM User environment \n\ -correctly. You must set at least your Proxy host name. Others are \n\ -supposed to be set \"Normal Values\". \n\ -\n\ -For more detail specifications click \"MMM\" on MMM, and then select \n\ -\"Preferences\". You should be notice to be overriden default preference \n\ -file \"~/.mmm/prefs\" by doing \"Preferences\" on MMM. Some of which \n\ -might be bad for FreeBSD. -\n\ -Please set your environment by selecting followng items." - -Protocols="Proxy host name, Proxy port, Always Use Proxy or not, \n\ -HTTP Send referer, User Agent, Timeout on headers, \n\ -Password lifetime, Password save file, Proxy port and \n\ -Local binaries path would be set.\n\ -\n\ -But if you use in default setting, only \"Proxy host name\" \n\ -MUST BE SET for your site." - -Proxy_host="Write your Proxy host name (Press F1 to Help)" - -Always_Use_Proxy="You always use proxy? (Press F1 to Help) \n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -HTTP_Send_referer="You adopt \"HTTP Send referer\"? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -User_Agent="Specify your \"User Agent\"(Press F1 to Help)" - -Timeout_On_Headers="Specify Timeout on headers in seconds(Press F1 to Help)" - -Password_Lifetime="Specify Password lifetime in seconds (Press F1 to Help)" - -Password_Save_File="Specify Password save file (Press F1 to Help)" - -Local_Binaries_Path="Specify Local binaries path (Press F1 to Help)" - -HTML_parsing_and_display="DTD, Strict HTML lexing, Attempt tables and \n\ -Attempt smooth scroll would be set.\n\ -\n\ -But if you use in default setting, NOTHING should be done." - -DTD="Specify DTD (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Strict_HTML_lexing="Strict HTML lexing? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Attempt_tables="Attempt tables? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Attempt_smooth_scroll="Attempt smooth scroll? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Images="Image loading, Max image connections, Gamma correction and \n\ -JPEG Converter would be set.\n\ -\n\ -But if you use in default setting, NOTHING should be done." - -No_images_at_all="No images at all? (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Image_loading="Specify Image loading (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Max_Image_Connections="Specify Max image connections (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -Gamma_Correction="Specify Gamma Correction (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -JPEG_Converter="Specify JPEG Converter (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -External_Programs="Mailto program and Hotlist program would be set.\n\ -\n\ -But if you use in default setting, NOTHING should be done." - -Mailto_program="Specify Mailto program (Press F1 to Help)" - -Hotlist_program="Specify Hotlist program (Press F1 to Help)" - -Applets="Specify Applets (Press F1 to Help)\n\ -Press SPACE \"ON\" or \"OFF\" toggled." - -proxy_host="" -proxy_port=80 -always_use_proxy=0 -http_send_referer=0 -user_agent="MMM/0.40" -timeout_on_headers=60 -password_lifetime=60 -password_save_file="" -local_binaries_path="" -dtd="HTML 3.2" -strict_html_lexing=0 -attempt_tables=1 -attempt_smooth_scroll=0 -no_images_at_all=0 -image_loading="After document, automatic" -max_image_connections=3 -gamma_correction=1 -jpeg_converter=djpeg -mailto_program="" -hotlist_program="" -active=1 -paranoid=0 - -Reconfirm=' -Protocols - - Proxy host : "%proxy_host%" - - Proxy port : "%proxy_port%" - - Always Use Proxy : "%always_use_proxy%" - - HTTP Send referer : "%http_send_referer%" - - User Agent : "%user_agent%" - - Timeout on headers (seconds): "%timeout_on_headers%" - - Password lifetime (minutes) : "%password_lifetime%" - - Password save file : "%password_save_file%" - - Local binaries path : "%local_binaries_path%" - -HTML parsing and display - - DTD : "%dtd%" - - Strict HTML lexing : "%strict_html_lexing%" - - Attempt tables : "%attempt_tables%" - - Attempt smooth scroll : "%attempt_smooth_scroll%" - -Images - - No images at all : "%no_images_at_all%" - - Image loading : "%image_loading%" - - Max image connections : "%max_image_connections%" - - Gamma correction : "%gamma_correction%" - - JPEG Converter : "%jpeg_converter%" - -External Programs - - Mailto program : "%mailto_program%" - - Hotlist program : "%hotlist_program%" - -Applets - - Paranoid : "%paranoid%" - - Active : "%active%"' - -SEDCMD='${SED} -e "s@%proxy_host%@${proxy_host}@g" - -e "s@%proxy_port%@${proxy_port}@g" - -e "s@%always_use_proxy%@${always_use_proxy}@g" - -e "s@%http_send_referer%@${http_send_referer}@g" - -e "s@%user_agent%@${user_agent}@g" - -e "s@%timeout_on_headers%@${timeout_on_headers}@g" - -e "s@%password_lifetime%@${password_lifetime}@g" - -e "s@%password_save_file%@${password_save_file}@g" - -e "s@%local_binaries_path%@${local_binaries_path}@g" - -e "s@%dtd%@${dtd}@g" - -e "s@%strict_html_lexing%@${strict_html_lexing}@g" - -e "s@%attempt_tables%@${attempt_tables}@g" - -e "s@%attempt_smooth_scroll%@${attempt_smooth_scroll}@g" - -e "s@%no_images_at_all%@${no_images_at_all}@g" - -e "s@%image_loading%@${image_loading}@g" - -e "s@%max_image_connections%@${max_image_connections}@g" - -e "s@%gamma_correction%@${gamma_correction}@g" - -e "s@%jpeg_converter%@${jpeg_converter}@g" - -e "s@%mailto_program%@${mailto_program}@g" - -e "s@%hotlist_program%@${hotlist_program}@g" - -e "s@%active%@${active}@g" - -e "s@%paranoid%@${paranoid}@g"' - -answer=None - -while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up User Environment" \ - --hline "Select Set up Items" \ - --menu "${MainMenu}" -1 -1 7 \ - Protocols "Proxy host,HTTP Send referer,Password,..." \ - HTML "HTML parsing and display" \ - Images "Image loading,JPEG Converter,..." \ - External "External Programs(Mail and Hotlist)" \ - Applets "Applets(Active or Paranoid)" \ - Reconfirm "Reconfirm all settings" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - case $retval in - 0) if [ -z ${answer} ]; then - echo "Nothing selected" - exit 1 - fi - ;; - 1) echo "Cancel pressed." - exit 1 - ;; - 255) echo "ESC pressed." - exit 1 - ;; - esac - case ${answer} in - Protocols) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up Protocols" \ - --hline "Select Set up Items" \ - --menu "${Protocols}" -1 -1 10 \ - Host "Proxy host name" \ - Port "Proxy port number" \ - Always "Always Use Proxy or not" \ - Referer "HTTP Send referer or not" \ - User "User Agent" \ - Timeout "Timeout on headers (seconds)" \ - Life "Password lifetime (minutes)" \ - Save "Password save file" \ - Binary "Local binaries path" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - Host) - if [ ! -z "${proxy_host}" ]; then - ${DIALOG} --title "Confirm your Proxy host name" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/proxy_host.hlp \ - --yesno "Your Proxy host name has set \"${proxy_host}\". Is -this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Proxy host name" \ - --hline "Write your Proxy host name" \ - --hfile ${DOCDIR}/proxy_host.hlp \ - --inputbox "${Proxy_host}" -1 -1 \ - 2> /tmp/input.tmp.$$ - proxy_host=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Port) - if [ ! -z "${proxy_port}" ]; then - ${DIALOG} --title "Confirm your Proxy port number" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/proxy_port.hlp \ - --yesno "Your Proxy port number has set \"${proxy_port}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Proxy port number" \ - --hline "Put your Proxy port number" \ - --hfile ${DOCDIR}/proxy_port.hlp \ - --inputbox "${Proxy_port}" -1 -1 \ - 2> /tmp/input.tmp.$$ - proxy_port=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Always) - ${DIALOG} --title "Always Use Proxy" \ - --hline "" \ - --hfile ${DOCDIR}/always_use_proxy.hlp \ - --checklist "${Always_Use_Proxy}" -1 -1 1 \ - "1" "Always Use Proxy" OFF \ - 2> /tmp/checklist.tmp.$$ - always_use_proxy=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Referer) - ${DIALOG} --title "HTTP Send referer" \ - --hline "" \ - --hfile ${DOCDIR}/http_send_refer.hlp \ - --checklist "${HTTP_Send_referer}" -1 -1 1 \ - "1" "Set HTTP Send referer" OFF \ - 2> /tmp/checklist.tmp.$$ - http_send_referer=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - User) - if [ ! -z "${user_agent}" ]; then - ${DIALOG} --title "Confirm your User Agent" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/user_agent.hlp \ - --yesno "Your User Agent has set \"${user_agent}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your User Agent" \ - --hline "Write your User Agent" \ - --hfile ${DOCDIR}/user_agent.hlp \ - --inputbox "${User_Agent}" -1 -1 \ - 2> /tmp/input.tmp.$$ - user_agent=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Timeout) - if [ ! -z "${timeout_on_headers}" ]; then - ${DIALOG} --title "Confirm Timeout on headers (seconds)" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/timeout_on_headers.hlp \ - --yesno "Timeout on headers (seconds) has set \"${timeout_on_headers}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Timeout on headers (seconds)" \ - --hline "Write Timeout on headers (seconds)" \ - --hfile ${DOCDIR}/timeout_on_headers.hlp \ - --inputbox "${Timeout_On_Headers}" -1 -1 \ - 2> /tmp/input.tmp.$$ - timeout_on_headers=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Life) - if [ ! -z "${password_lifetime}" ]; then - ${DIALOG} --title "Confirm your Password lifetime (minutes)" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/password_lifetime.hlp \ - --yesno "Your Password lifetime (minutes) has set \"${password_lifetime}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Password lifetime (minutes)" \ - --hline "Write your Password lifetime (minutes)" \ - --hfile ${DOCDIR}/password_lifetime.hlp \ - --inputbox "${Password_Lifetime}" -1 -1 \ - 2> /tmp/input.tmp.$$ - password_lifetime=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Save) - if [ ! -z "${password_save_file}" ]; then - ${DIALOG} --title "Confirm your Password save file" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/password_save_file.hlp \ - --yesno "Your Password save file has set \"${password_save_file}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Password save file" \ - --hline "Write your Password save file" \ - --hfile ${DOCDIR}/password_lifetime.hlp \ - --inputbox "${Password_Save_File}" -1 -1 \ - 2> /tmp/input.tmp.$$ - password_save_file=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Binary) - if [ ! -z "${local_binaries_path}" ]; then - ${DIALOG} --title "Confirm your Local binaries path" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/local_binaries_path.hlp \ - --yesno "Your Local binaries path has set \"${local_binaries_path}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Local binaries path" \ - --hline "Write your Local binaries path" \ - --hfile ${DOCDIR}/local_binaries_path.hlp \ - --inputbox "${Local_Binaries_Path}" -1 -1 \ - 2> /tmp/input.tmp.$$ - local_binaries_path=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac - done - answer=None - ;; - HTML) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up HTML parsing and display" \ - --hline "Select Set up Items" \ - --menu "${HTML_parsing_and_display}" -1 -1 5 \ - DTD "HTML code difinition" \ - Strict "Strict HTML lexing" \ - Tables "Attempt tables" \ - Smooth "Attempt smooth scroll" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - DTD) - ${DIALOG} --title "DTD" \ - --hline "" \ - --hfile ${DOCDIR}/dtd.hlp \ - --checklist "${DTD}" -1 -1 2 \ - "HTML 2.0" "HTML 2.0" OFF \ - "HTML 3.2" "HTML 3.2" ON \ - 2> /tmp/checklist.tmp.$$ - dtd=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Strict) - ${DIALOG} --title "Strict HTML lexing" \ - --hline "" \ - --hfile ${DOCDIR}/strict_html_lexing.hlp \ - --checklist "${Strict_HTML_lexing}" -1 -1 1 \ - "0" "Strict HTML lexing" OFF \ - 2> /tmp/checklist.tmp.$$ - strict_html_lexing=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Tables) - ${DIALOG} --title "Attempt tables" \ - --hline "" \ - --hfile ${DOCDIR}/attempt_tables.hlp \ - --checklist "${Attempt_tables}" -1 -1 1 \ - "1" "Attempt tables" ON \ - 2> /tmp/checklist.tmp.$$ - attempt_tables=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Smooth) - ${DIALOG} --title "Attempt smooth scroll" \ - --hline "" \ - --hfile ${DOCDIR}/attempt_smooth_scroll.hlp \ - --checklist "${Attempt_smooth_scroll}" -1 -1 1 \ - "0" "Attempt smooth scroll" OFF \ - 2> /tmp/checklist.tmp.$$ - attempt_smooth_scroll=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - esac - done - answer=None - ;; - Images) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up Images" \ - --hline "Select Set up Items" \ - --menu "${Images}" -1 -1 6 \ - No "No images at all" \ - Loading "Image loading" \ - Max "Max image connections" \ - Gamma "Gamma correction" \ - Jpeg "JPEG Converter" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - No) - ${DIALOG} --title "No images at all" \ - --hline "" \ - --hfile ${DOCDIR}/no_images_at_all.hlp \ - --checklist "${No_images_at_all}" -1 -1 1 \ - "0" "No images at all" OFF \ - 2> /tmp/checklist.tmp.$$ - no_images_at_all=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Loading) - ${DIALOG} --title "Image loading" \ - --hline "" \ - --hfile ${DOCDIR}/image_loading.hlp \ - --checklist "${Image_loading}" -1 -1 3 \ - "After document, manual" "After document, manual" OFF \ - "After document, automatic" "After document, automatic" ON \ - "During document loading" "During document loading" OFF \ - 2> /tmp/checklist.tmp.$$ - image_loading=`cat /tmp/checklist.tmp.$$` - rm -f /tmp/checklist.tmp.$$ - ;; - Max) - if [ ! -z "${max_image_connections}" ]; then - ${DIALOG} --title "Confirm Max image connections" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/max_image_connections.hlp \ - --yesno "Max image connections has set \"${max_image_connections}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Max image connections" \ - --hline "Specify Max image connections" \ - --hfile ${DOCDIR}/max_image_connections.hlp \ - --inputbox "${Max_Image_Connections}" -1 -1 \ - 2> /tmp/input.tmp.$$ - max_image_connections=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Gamma) - if [ ! -z "${gamma_correction}" ]; then - ${DIALOG} --title "Confirm your Gamma correction" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/gamma_correction.hlp \ - --yesno "Gamma correction has set \"${gamma_correction}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Gamma correction" \ - --hline "Specify Gamma correction" \ - --hfile ${DOCDIR}/gamma_correction.hlp \ - --inputbox "${Gamma_Correction}" -1 -1 \ - 2> /tmp/input.tmp.$$ - gamma_correction=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Jpeg) - if [ ! -z "${jpeg_converter}" ]; then - ${DIALOG} --title "Confirm JPEG Converter" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/jpeg_converter.hlp \ - --yesno "Your JPEG Converter has set \"${jpeg_converter}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set JPEG Converter" \ - --hline "Specify JPEG Converter" \ - --hfile ${DOCDIR}/jpeg_converter.hlp \ - --inputbox "${JPEG_Converter}" -1 -1 \ - 2> /tmp/input.tmp.$$ - jpeg_converter=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac - done - answer=None - ;; - External) - answer=None - while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "MMM(0.40) Set up External Programs" \ - --hline "Select Set up Items" \ - --menu "${External_Programs}" -1 -1 3 \ - Mailto "Mailto program" \ - Hotlist "Hotlist program" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - if [ X"${retval}" = "X1" -o X"${retval}" = "X255" ]; then break; fi - case ${answer} in - Mailto) - if [ ! -z "${mailto_program}" ]; then - ${DIALOG} --title "Confirm Mailto program" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/mailto_program.hlp \ - --yesno "Mailto program has set \"${mailto_program}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Mailto program" \ - --hline "Specify Mailto program" \ - --hfile ${DOCDIR}/mailto_program.hlp \ - --inputbox "${Mailto_program}" -1 -1 \ - 2> /tmp/input.tmp.$$ - mailto_program=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Hotlist) - if [ ! -z "${hotlist_program}" ]; then - ${DIALOG} --title "Confirm Hotlist program" \ - --hline "Press Yes/No" \ - --hfile ${DOCDIR}/hotlist_program.hlp \ - --yesno "Your Hotlist program has set \"${hotlist_program}\". Is this OK?\n(Press F1 to Help)" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Hotlist program" \ - --hline "Specify Hotlist program" \ - --hfile ${DOCDIR}/hotlist_program.hlp \ - --inputbox "${Hotlist_program}" -1 -1 \ - 2> /tmp/input.tmp.$$ - hotlist_program=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac - done - answer=None - ;; - Applets) - ${DIALOG} --title "MMM(0.40) Set up Applets" \ - --hline "" \ - --hfile ${DOCDIR}/applets.hlp \ - --checklist "${Applets}" -1 -1 2 \ - "Active" "Active" ON \ - "Paranoid" "Paranoid" OFF \ - 2> /tmp/checklist.tmp.$$ - applets=`cat /tmp/checklist.tmp.$$` - case ${applets} in - Active) active=1; paranoid=0; ;; - Paranoid) active=0; paranoid=1; ;; - esac - rm -f /tmp/checklist.tmp.$$ - ;; - Reconfirm) - echo "${Reconfirm}" | eval ${SEDCMD} > /tmp/textbox.tmp.$$ - ${DIALOG} --title "MMM(0.40) Reconfirm all settings" \ - --hline "" \ - --textbox /tmp/textbox.tmp.$$ 30 70 - rm -f /tmp/textbox.tmp.$$ - ;; - esac -done - -if [ ! -d ${HOME}/.mmm ]; then mkdir ${HOME}/.mmm; fi -if [ -f ${HOME}/.mmm/prefs ]; then - mv ${HOME}/.mmm/prefs ${HOME}/.mmm/prefs.$$ -fi -if [ ! -f ${HOME}/.mmm/MMM.ad ]; then - ${CP} ${LIBDIR}/JMMM.ad ${HOME}/.mmm/MMM.ad -fi - -eval ${SEDCMD} < ${DOCDIR}/prefs > ${HOME}/.mmm/prefs diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/files/user_agent.hlp ./files/user_agent.hlp --- ../../current/ports/japanese/mmm/files/user_agent.hlp Fri Jan 3 21:22:02 1997 +++ ./files/user_agent.hlp Thu Jan 1 09:00:00 1970 @@ -1,3 +0,0 @@ -Normally MMM indicates its identity and version. For privacy reasons, or -for defeating User-Agent: based stupid CGI tricks, you may redefine the -User-Agent: header. In principle, this string should not contain spaces. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/patches/patch-ab ./patches/patch-ab --- ../../current/ports/japanese/mmm/patches/patch-ab Mon Jan 6 23:30:55 1997 +++ ./patches/patch-ab Sun Jun 1 12:49:05 1997 @@ -1,6 +1,6 @@ ---- Makefile Mon Dec 2 22:15:01 1996 -+++ Makefile Sun Jan 5 09:56:11 1997 -@@ -168,15 +168,15 @@ +--- Makefile~ Sun Jun 1 12:42:06 1997 ++++ Makefile Sun Jun 1 12:47:43 1997 +@@ -169,15 +169,15 @@ install: mmm htparse mmm_remote [ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/pkg/COMMENT ./pkg/COMMENT --- ../../current/ports/japanese/mmm/pkg/COMMENT Fri Jan 3 21:22:03 1997 +++ ./pkg/COMMENT Thu Jan 1 09:00:00 1970 @@ -1 +0,0 @@ -WWW browser using Objective Caml, Tcl7.5jp and Tk4.1jp. diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/pkg/DESCR ./pkg/DESCR --- ../../current/ports/japanese/mmm/pkg/DESCR Mon Mar 3 17:30:30 1997 +++ ./pkg/DESCR Thu Jan 1 09:00:00 1970 @@ -1,44 +0,0 @@ -MMM is a WWW browser implemented in Objective Caml , ocamltk41(the library -for interface Objective Caml to Tcl/Tk) and Tcl7.5/Tk4.1 or Tcl7.6/Tk4.2. -MMM is written by Francois Rouaix, and Copyright INRIA. - -Please note that the software is a product currently being developed. INRIA -shall not be responsible in any way concerning conformity, and in particular -shall not be liable should the software not comply with the requirements of -the user, INRIA not being obliged to repair any possible direct or indirect -damage. - -Requirements: -============= -Unlike other popular Web browsers, MMM relies on the availability of other -free software. MMM will fail to operate properly in the absence of the -following: -* gzcat, available on a GNU Software site near you -* Tcl 7.5jp and Tk 4.1jp or Tcl 7.6jp and Tk 4.2jp, from the Tcl/Tk Project -At Sun Microsystems Laboratories -* Metamail (metamail, mmencode and mmdecode) by Nathaniel Borenstein, -available by ftp -* Users must have access to a proxy server such as CERN httpd. - -Run & Implementation -==================== -Before start MMM, you should be set up your site installation of MMM. But -you would be easily done by user-install script. Type - - % /usr/local/share/doc/mmm/user-install - -While various customization might be available, only "Proxy host name" -should be set if you use in default setting. -After site installation, you may be get start MMM. Just type - - % mmm - -MMM will take up default MMM home page. - -Documentation and other information: -==================================== -The MMM home page is located at -http://pauillac.inria.fr/~rouaix/mmm/ - -- Kiriyama Kazuhiko -kiri@kiri.toba-cmt.ac.jp diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/pkg/MESSAGE ./pkg/MESSAGE --- ../../current/ports/japanese/mmm/pkg/MESSAGE Sat May 24 16:48:37 1997 +++ ./pkg/MESSAGE Thu Jan 1 09:00:00 1970 @@ -1,12 +0,0 @@ -************************************************************************* -* * -* >>> Congratuation !!! MMM successfully installed! <<< * -* * -* MMM successfully installed on your site. But you should be set up * -* your user environment. You can do this in control panel in MMM by * -* selecting "MMM",but we recommend using "user-install" script. * -* Just type "/usr/local/share/examples/mmm/user-install",and specify * -* only "proxy host name",then "Quit". So you would be set up all your * -* environment. Type "mmm". Enjoy MMM world! * -* * -************************************************************************* diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mmm/pkg/PLIST ./pkg/PLIST --- ../../current/ports/japanese/mmm/pkg/PLIST Mon Mar 3 17:30:30 1997 +++ ./pkg/PLIST Thu Jan 1 09:00:00 1970 @@ -1,47 +0,0 @@ -bin/mmm -lib/mmm/JMMM.ad -lib/mmm/MMM.ad -lib/mmm/htparse -lib/mmm/mdk/safeapplets.cmi -lib/mmm/mdk/safeapplets.mli -lib/mmm/mdk/safefrx.cmi -lib/mmm/mdk/safeio.cmi -lib/mmm/mdk/safeio.mli -lib/mmm/mdk/safejtk.cmi -lib/mmm/mdk/safemmm.cmi -lib/mmm/mdk/safemmm.mli -lib/mmm/mdk/safestd.cmi -lib/mmm/mdk/safestd.mli -lib/mmm/mdk/safetk.cmi -lib/mmm/mdk/safetkanim.cmi -lib/mmm/mmm.bin -lib/mmm/mmm_remote -lib/mmm/msgs.jpn.txt -lib/mmm/msgs.txt -share/doc/mmm/INSTALL -share/examples/mmm/always_use_proxy.hlp -share/examples/mmm/applets.hlp -share/examples/mmm/attempt_smooth_scroll.hlp -share/examples/mmm/attempt_tables.hlp -share/examples/mmm/dtd.hlp -share/examples/mmm/gamma_correction.hlp -share/examples/mmm/hotlist_program.hlp -share/examples/mmm/http_send_refer.hlp -share/examples/mmm/image_loading.hlp -share/examples/mmm/jpeg_converter.hlp -share/examples/mmm/local_binaries_path.hlp -share/examples/mmm/mailto_program.hlp -share/examples/mmm/max_image_connections.hlp -share/examples/mmm/no_images_at_all.hlp -share/examples/mmm/password_lifetime.hlp -share/examples/mmm/prefs -share/examples/mmm/proxy_host.hlp -share/examples/mmm/proxy_port.hlp -share/examples/mmm/strict_html_lexing.hlp -share/examples/mmm/timeout_on_headers.hlp -share/examples/mmm/user-install -share/examples/mmm/user_agent.hlp -@dirrm lib/mmm/mdk -@dirrm lib/mmm -@dirrm share/doc/mmm -@dirrm share/examples/mmm >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 04:10:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08241 for ports-outgoing; Thu, 5 Jun 1997 04:10:11 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08228; Thu, 5 Jun 1997 04:10:06 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 04:10:06 -0700 (PDT) Resent-Message-Id: <199706051110.EAA08228@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, kiri@kiri.toba-cmt.ac.jp Received: from kiri.toba-cmt.ac.jp (kiri.toba-cmt.ac.jp [202.26.248.91]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id EAA07844 for ; Thu, 5 Jun 1997 04:00:03 -0700 (PDT) Received: (from kiri@localhost) by kiri.toba-cmt.ac.jp (8.8.5/8.8.5) id UAA17603; Thu, 5 Jun 1997 20:02:15 +0900 (JST) Message-Id: <199706051102.UAA17603@kiri.toba-cmt.ac.jp> Date: Thu, 5 Jun 1997 20:02:15 +0900 (JST) From: Kazuhiko Kiriyama(System administrator) Reply-To: kiri@kiri.toba-cmt.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3793: Update port jp-w3-2.2.26 (japanese/w3). Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3793 >Category: ports >Synopsis: Update port jp-w3-2.2.26 (japanese/w3). >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 04:10:05 PDT 1997 >Last-Modified: >Originator: Kazuhiko Kiriyama >Organization: Toba National College of Maritime Technology. Department of Electronic Mechanical Engineering >Release: FreeBSD 2.2.2-RELEASE i386 >Environment: >Description: I've updated the port jp-w3-2.2.26 (japanese/w3). Current modifications is (1) Change dir installation with install-info. (2) Slave to www/w3 Delete and Update files are respecively [Delete] : files/ (Whole directory) files/dot.emacs files/dot.mosaic-hotlist-default files/md5 files/user-install patches/ (Whole directory) patches/patch-aa pkg/DEINSTALL pkg/INSTALL [Update] : Makefile pkg/PLIST I put the diff from ports-current(japanese/w3) in "Fix:". >How-To-Repeat: >Fix: diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/Makefile ./Makefile --- ../../current/ports/japanese/w3/Makefile Sun Feb 16 17:22:20 1997 +++ ./Makefile Sat May 31 21:45:28 1997 @@ -6,36 +6,18 @@ # $Id: Makefile,v 1.3 1997/02/15 07:42:32 max Exp $ # -DISTNAME= w3-2.2.26 PKGNAME= jp-w3-2.2.26 CATEGORIES= www japanese -MASTER_SITES= ftp://ftp.cs.indiana.edu/pub/elisp/w3/ \ - ftp://ftp.iij.ad.jp/pub/network/WWW/w3/ - -MAINTAINER= kiri@kiri.toba-cmt.ac.jp +FILESDIR= ${.CURDIR}/../../www/w3/files +PATCHDIR= ${.CURDIR}/../../www/w3/patches # Don't RUN_DEPENDS on mule because we don't know which version the # user would want. We can't omit the BUILD_DEPENDS because it needs # to byte-compile .el files. BUILD_DEPENDS= mule:${PORTSDIR}/editors/mule +RUN_DEPENDS= -WRKSRC= ${WRKDIR}/w3 - -DOCDIR= ${PREFIX}/share/doc/w3 -SAMPLEDIR= ${PREFIX}/share/examples/w3 - -post-install: -.if !defined(NOPORTDOCS) - @${MKDIR} ${DOCDIR} - @${MKDIR} ${SAMPLEDIR} -.for f in dot.emacs dot.mosaic-hotlist-default - @${INSTALL_DATA} ${FILESDIR}/${f} ${SAMPLEDIR} -.endfor - @${INSTALL_SCRIPT} ${FILESDIR}/user-install ${SAMPLEDIR} -.for f in W3.ad clean-cache Makefile w3.txi - @${INSTALL_DATA} ${WRKSRC}/${f} ${DOCDIR} -.endfor -.endif - @${SETENV} PKG_PREFIX=${PREFIX} /bin/sh ${PKGDIR}/INSTALL ${PKGNAME} POST-INSTALL +EMACSCMD= mule +ELISPDIR= ${PREFIX}/lib/mule/site-lisp -.include +.include "${.CURDIR}/../../www/w3/Makefile" diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/files/dot.emacs ./files/dot.emacs --- ../../current/ports/japanese/w3/files/dot.emacs Sat Jan 4 22:19:42 1997 +++ ./files/dot.emacs Thu Jan 1 09:00:00 1970 @@ -1,8 +0,0 @@ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Emacs-w3 ;;;; -;; Emacs-w3(Ver.2.2.26) ;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -(setq url-keep-history t) -(setq url-be-asynchronous t) -(setq w3-default-homepage - "file://localhost/usr/share/doc/handbook/handbook.html") -;; Emacs-w3 end diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/files/dot.mosaic-hotlist-default ./files/dot.mosaic-hotlist-default --- ../../current/ports/japanese/w3/files/dot.mosaic-hotlist-default Sat Jan 4 22:19:42 1997 +++ ./files/dot.mosaic-hotlist-default Thu Jan 1 09:00:00 1970 @@ -1,27 +0,0 @@ -ncsa-xmosaic-hotlist-format-1 -Default - -ftp://localhost/usr/share/doc/handbook/handbook.html Fri Jun 28 00:22:54 1996 -FreeBSD Handbook -http://www.sra.co.jp/public/doc/bsd/ Fri Jun 28 00:54:37 1996 -index to BSD UNIX information (in Japanese) -http://www.ee.t.u-tokyo.ac.jp/%7Emita/FreeBSD/FreeBSD.html Fri Jun 28 00:57:49 1996 -Easy Way to Setup FreeBSD -http://zephyr.elcom.nitech.ac.jp/%7Eyuki/FreeBSD/search.html Fri Jun 28 01:03:03 1996 -FreeBSD Search -http://www.cs.orst.edu/%7Etakikawm/fj/ Fri Jun 28 21:23:27 1996 -fj Home Page -http://www.fujitsu.co.jp/hypertext/NetNews/fj.net.infosystems.www.html Fri Jun 28 21:39:08 1996 -Search of /public/wais/fj.net.infosystems.www -http://www.lycos.com/ Fri Jun 28 22:00:17 1996 -Lycos, Inc. Home Page -http://altavista.digital.com/ Fri Jun 28 22:01:14 1996 -AltaVista: Main Page -http://www. Overview.html Fri Jun 28 22:02:41 1996 -The World-Wide Web Virtual Library: Subject Catalogue -http://www.cs.orst.edu/%7Etakikawm/fj/retrieval.html Fri Jun 28 22:08:52 1996 -fj Article Retrieval -http://www.yahoo.co.jp/ Sat Jun 29 18:02:35 1996 -Yahoo! JAPAN -http://www.cs.indiana.edu/elisp/ docs.html Mon Jul 1 14:05:51 1996 -The Emacs World Wide Web Browser diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/files/md5 ./files/md5 --- ../../current/ports/japanese/w3/files/md5 Sun Feb 16 17:22:20 1997 +++ ./files/md5 Thu Jan 1 09:00:00 1970 @@ -1 +0,0 @@ -MD5 (w3-2.2.26.tar.gz) = e12d158809b8084bd0dc3491610b0a43 diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/files/user-install ./files/user-install --- ../../current/ports/japanese/w3/files/user-install Sat Jan 4 22:19:42 1997 +++ ./files/user-install Thu Jan 1 09:00:00 1970 @@ -1,12 +0,0 @@ -#!/bin/sh - -PREFIX=/usr/local -SAMPLEDIR=${PREFIX}/share/examples/w3 - -if [ ! -f ${HOME}/.mosaic-hotlist-default ]; then - cp ${SAMPLEDIR}/dot.mosaic-hotlist-default ${HOME}/.mosaic-hotlist-default -fi - -mv ${HOME}/.emacs ${HOME}/.emacs.org.$$ -sed -e '/^;;* Emacs-w3 ;*$/,/^;; *Emacs-w3 end$/d' < ${HOME}/.emacs.org.$$ > ${HOME}/.emacs -cat ${SAMPLEDIR}/dot.emacs >> ${HOME}/.emacs diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/patches/patch-aa ./patches/patch-aa --- ../../current/ports/japanese/w3/patches/patch-aa Wed Dec 18 14:26:57 1996 +++ ./patches/patch-aa Thu Jan 1 09:00:00 1970 @@ -1,47 +0,0 @@ ---- Makefile.orig Sun Oct 29 01:21:56 1995 -+++ Makefile Sun Dec 1 00:08:26 1996 -@@ -1,5 +1,5 @@ - # what emacs is called on your system --EMACS = emacs -+EMACS = mule - - # How to make a directory - # need a -p if you want to make the parents! -@@ -8,12 +8,13 @@ - # Various other stuff used - RM = rm -f - CP = cp -+INSTALL_DATA = /usr/bin/install -c -o bin -g bin -m 444 - - # where the Info file should go --INFODIR = ../info -+INFODIR = ${PREFIX}/info - - # where the w3 lisp files should go --LISPDIR = $$HOME/lisp -+LISPDIR = ${PREFIX}/lib/mule/site-lisp/w3 - - # Change this to be where your .emacs file is stored - DOTEMACS = $$HOME/.emacs -@@ -57,16 +58,16 @@ - w3: docomp.el $(OBJECTS) - @echo Build of w3 complete... - --all: w3.info w3 emacs -+all: w3.info w3 - - install: all - @echo Installing in $(LISPDIR) - if [ ! -d $(LISPDIR) ] ; then $(MKDIR) $(LISPDIR) ; fi -- (cd $(LISPDIR) ; $(RM) -f $(SOURCES) $(OBJECTS) w3-sysdp.el*) -- $(CP) $(SOURCES) $(OBJECTS) $(LISPDIR) -+ (cd $(LISPDIR) ; $(RM) $(SOURCES) $(OBJECTS) w3-sysdp.el*) -+ ${INSTALL_DATA} $(SOURCES) $(OBJECTS) $(LISPDIR) - if [ ! -d $(INFODIR) ] ; then $(MKDIR) $(INFODIR) ; fi -- (cd $(INFODIR) ; $(RM) -f w3.info*) -- $(CP) w3.info* $(INFODIR) -+ (cd $(INFODIR) ; $(RM) w3.info*) -+ ${INSTALL_DATA} w3.info* $(INFODIR) - - emacs: - @echo Adding w3 setup to $(DOTEMACS) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/pkg/DEINSTALL ./pkg/DEINSTALL --- ../../current/ports/japanese/w3/pkg/DEINSTALL Sat Jan 4 22:07:21 1997 +++ ./pkg/DEINSTALL Thu Jan 1 09:00:00 1970 @@ -1,35 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -addir=/usr/X11R6/lib/X11/app-defaults -elispdir=${PKG_PREFIX}/lib/mule/site-lisp - -OptionStart="Emacs-w3 configuration options" -OptionEnd="End of Emacs-w3 configuration options" - -if [ "X$2" = X"DEINSTALL" ]; then - a=`grep "^\* w3:" ${infodir}/dir` - if [ "${a}" ]; then - echo "Deleting \"w3\" entry from ${infodir}/dir" - grep -v "^\* w3:" ${infodir}/dir> ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - fi - a=`grep "^;;; ${OptionStart}" ${elispdir}/site-start.el` - if [ "${a}" ]; then - echo "Deleting \"w3\" entry from ${elispdir}/site-start.el" - sed -e "/^;;; ${OptionStart}/,/^;;; ${OptionEnd}/d"\ - ${elispdir}/site-start.el \ - > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - fi - a=`grep "^!!! ${OptionStart}" ${addir}/Emacs` - if [ "${a}" ]; then - echo "Deleting \"w3\" entry from ${addir}/Emacs" - sed -e 's/^![ ]*\(Emacs\*w3-.*\)$/&/' \ - -e "/^!!! ${OptionStart}/,/^!!! ${OptionEnd}/d" \ - ${addir}/Emacs > ${addir}/Emacs.bak - mv ${addir}/Emacs.bak ${addir}/Emacs - fi -else - exit 0 -fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/pkg/INSTALL ./pkg/INSTALL --- ../../current/ports/japanese/w3/pkg/INSTALL Sat Jan 4 22:07:22 1997 +++ ./pkg/INSTALL Thu Jan 1 09:00:00 1970 @@ -1,96 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -addir=/usr/X11R6/lib/X11/app-defaults -elispdir=${PKG_PREFIX}/lib/mule/site-lisp - -OptionStart="Emacs-w3 configuration options" -OptionEnd="End of Emacs-w3 configuration options" - -if [ "X$2" = X"POST-INSTALL" ]; then - if [ ! -f ${infodir}/dir ]; then - cp ${FILESDIR}/dir ${infodir} - fi - grep -v "^\* w3:" ${infodir}/dir > ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - echo "Adding \"w3\" entry to ${infodir}/dir" - echo '* w3: (w3). WWW browser.' >> ${infodir}/dir - sed -e "/^;;; ${OptionStart}/,/^;;; ${OptionEnd}/d" \ - ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - echo "Adding \"w3\" entry to ${elispdir}/site-start.el" - echo ";;; ${OptionStart}" \ - >> ${elispdir}/site-start.el - echo "(setq load-path " >> ${elispdir}/site-start.el - echo " (cons (expand-file-name " >> ${elispdir}/site-start.el - echo " \"${PKG_PREFIX}/lib/mule/site-lisp/w3\") load-path))" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-preview-this-buffer \"w3\" \"WWW Previewer\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-follow-url-at-point" \ - >> ${elispdir}/site-start.el - echo " \"w3\" \"Find document at pt\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3 \"w3\" \"WWW Browser\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-open-local" >> ${elispdir}/site-start.el - echo " \"w3\" \"Open local file for WWW browsing\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-fetch" >> ${elispdir}/site-start.el - echo " \"w3\" \"Open remote file for WWW browsing\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-use-hotlist" >> ${elispdir}/site-start.el - echo " \"w3\" \"Use shortcuts to view WWW docs\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-show-hotlist" >> ${elispdir}/site-start.el - echo " \"w3\" \"Use shortcuts to view WWW docs\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-follow-link" >> ${elispdir}/site-start.el - echo " \"w3\" \"Follow a hypertext link.\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'w3-batch-fetch" >> ${elispdir}/site-start.el - echo " \"w3\" \"Batch retrieval of URLs\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-get-url-at-point" >> ${elispdir}/site-start.el - echo " \"url\" \"Find the url under the cursor\" nil)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-file-attributes" \ - >> ${elispdir}/site-start.el - echo " \"url\" \"File attributes of a URL\" nil)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-popup-info" >> ${elispdir}/site-start.el - echo " \"url\" \"Get info on a URL\" t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'url-retrieve" >> ${elispdir}/site-start.el - echo " \"url\" \"Retrieve a URL\" nil)" >> ${elispdir}/site-start.el - echo "(autoload 'url-buffer-visiting" \ - >> ${elispdir}/site-start.el - echo " \"url\" \"Find buffer visiting a URL.\" nil)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'gopher-dispatch-object" \ - >> ${elispdir}/site-start.el - echo " \"gopher\" \"Fetch gopher dir\" t)" \ - >> ${elispdir}/site-start.el - echo ";;; ${OptionEnd}" \ - >> ${elispdir}/site-start.el - if [ ! -f ${addir}/Emacs ]; then - touch ${addir}/Emacs - fi - sed -e 's/^![ ]*\(Emacs\*w3-.*\)$/&/' \ - -e "/^!!! ${OptionStart}/,/^!!! ${OptionEnd}/d" \ - ${addir}/Emacs > ${addir}/Emacs.bak - mv ${addir}/Emacs.bak ${addir}/Emacs - echo "Adding \"w3\" entry to ${addir}/Emacs" - sed -e 's/^[ ]*Emacs\*w3-.*$/! &/' ${addir}/Emacs \ - > ${addir}/Emacs.bak - echo "!!! ${OptionStart}" >> ${addir}/Emacs.bak - echo "Emacs*w3-node-style.attributeForeground: purple" \ - >> ${addir}/Emacs.bak - echo "Emacs*w3-visited-node-style.attributeForeground: blue" \ - >> ${addir}/Emacs.bak - echo "!!! End of ${OptionStart}" >> ${addir}/Emacs.bak - mv ${addir}/Emacs.bak ${addir}/Emacs - exit 0 -else - exit 0 -fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/w3/pkg/PLIST ./pkg/PLIST --- ../../current/ports/japanese/w3/pkg/PLIST Sat Jan 4 22:07:22 1997 +++ ./pkg/PLIST Sun May 4 14:06:06 1997 @@ -68,3 +68,6 @@ share/examples/w3/dot.emacs share/examples/w3/dot.mosaic-hotlist-default share/examples/w3/user-install +@dirrm lib/mule/site-lisp/w3 +@dirrm share/doc/w3 +@dirrm share/examples/w3 >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 04:10:20 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08281 for ports-outgoing; Thu, 5 Jun 1997 04:10:20 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08246; Thu, 5 Jun 1997 04:10:13 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 04:10:13 -0700 (PDT) Resent-Message-Id: <199706051110.EAA08246@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, kiri@kiri.toba-cmt.ac.jp Received: from kiri.toba-cmt.ac.jp (kiri.toba-cmt.ac.jp [202.26.248.91]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA07767 for ; Thu, 5 Jun 1997 03:58:35 -0700 (PDT) Received: (from kiri@localhost) by kiri.toba-cmt.ac.jp (8.8.5/8.8.5) id UAA17781; Thu, 5 Jun 1997 20:02:45 +0900 (JST) Message-Id: <199706051102.UAA17781@kiri.toba-cmt.ac.jp> Date: Thu, 5 Jun 1997 20:02:45 +0900 (JST) From: Kazuhiko Kiriyama(System administrator) Reply-To: kiri@kiri.toba-cmt.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3794: Update port jp-mew-1.70 (japanese/mew). Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3794 >Category: ports >Synopsis: Update port jp-mew-1.70 (japanese/mew). >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 04:10:08 PDT 1997 >Last-Modified: >Originator: Kazuhiko Kiriyama >Organization: Toba National College of Maritime Technology. Department of Electronic Mechanical Engineering >Release: FreeBSD 2.2.2-RELEASE i386 >Environment: >Description: I've updated the port jp-mew-1.70 (japanese/mew). Current modifications is (1) Change dir installation with install-info. (2) Slave to japanese/mew Add,Delete and Update files are respecively [Add] : files/DEINSTALL.tmpl files/INSTALL.tmpl files/MH-postproc.jp.tmpl files/MH-postproc.tmpl files/dot.emacs.jp files/dot.mh_profile.jp files/scan.form.jp files/user-install.tmpl patches/patch-ac patches/patch-ad patches/patch-ae patches/patch-af [Delete] : files/MH-postproc files/user-install pkg/DEINSTALL pkg/INSTALL [Update] : files/aliases files/dot.emacs files/md5 files/scan.form patches/patch-aa patches/patch-ab pkg/DESCR pkg/PLIST I put the diff from ports-current(japanese/mew) in "Fix:". >How-To-Repeat: >Fix: diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/Makefile ./Makefile --- ../../current/ports/japanese/mew/Makefile Sun Mar 16 14:49:07 1997 +++ ./Makefile Mon Jun 2 17:26:11 1997 @@ -1,15 +1,16 @@ # New ports collection makefile for: Mew -# Version required: 1.54 +# Version required: 1.70 # Date created: 30 December 1996 # Whom: Kiriyama Kazuhiko # -# $Id: Makefile,v 1.3 1997/03/15 11:56:30 asami Exp $ +# $Id: Makefile,v 1.3 1997/01/03 16:52:53 max Exp $ # -DISTNAME= mew-1.54 -PKGNAME= jp-mew-1.54 -CATEGORIES= mail japanese +DISTNAME= mew-1.70 +PKGNAME?= jp-mew-1.70 +CATEGORIES?= mail japanese MASTER_SITES= ftp://ftp.aist-nara.ac.jp/pub/elisp/Mew/ \ + ftp://ftp.kyushu-u.ac.jp/pub/Misc/mew/ \ ftp://ports.jp.freebsd.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/ MAINTAINER= kiri@kiri.toba-cmt.ac.jp @@ -17,32 +18,70 @@ # Don't RUN_DEPENDS on mule because we don't know which version the # user would want. We can't omit the BUILD_DEPENDS because it needs # to byte-compile .el files. -BUILD_DEPENDS= mule:${PORTSDIR}/editors/mule -RUN_DEPENDS= nkf:${PORTSDIR}/japanese/nkf \ +BUILD_DEPENDS?= mule:${PORTSDIR}/editors/mule +RUN_DEPENDS?= nkf:${PORTSDIR}/japanese/nkf \ mhmail:${PORTSDIR}/japanese/mh RESTRICTED= "USA ITAR export restrictions (has PGP hooks)" - -DOCDIR= ${PREFIX}/share/doc/mew -SAMPLEDIR= ${PREFIX}/share/examples/mew +MAKE_ENV+= EMACSCMD=${EMACSCMD} ELISPDIR=${ELISPDIR}/mew RM=${RM} \ + MKDIR="${MKDIR}" INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ + INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ + INSTALL_DATA="${INSTALL_DATA}" + +VERSION= 1.70 +EMACSCMD?= mule +EMACSEL?= mew-mule2.el +PORTSDOCDIR?= ${PREFIX}/share/doc/mew-jp +SAMPLEDIR?= ${PREFIX}/share/examples/mew-jp +ELISPDIR?= ${PREFIX}/lib/mule/site-lisp +INFODIR= ${PREFIX}/info +DIRSECTION= The Emacs editor and associated tools +INFOFILE?= mew.jis.info +MHPOSTPROC?= MH-postproc.jp +SCANFORM?= scan.form.jp +DOTEMACS?= dot.emacs.jp +DOTMHPROFILE?= dot.mh_profile.jp + +post-build: +.for f in ${MHPOSTPROC} user-install INSTALL DEINSTALL + @${SED} -e "s,%VERSION%,${VERSION},g" \ + -e "s,%PREFIX%,${PREFIX},g" \ + -e "s,%TOUCH%,${TOUCH},g" \ + -e "s,%INFODIR%,${INFODIR},g" \ + -e "s,%ELISPDIR%,${ELISPDIR},g" \ + -e "s,%INFOFILE%,${INFOFILE},g" \ + -e "s,%SAMPLEDIR%,${SAMPLEDIR},g" \ + -e "s,%DIRSECTION%,${DIRSECTION},g" \ + < ${FILESDIR}/${f}.tmpl > ${FILESDIR}/${f} +.endfor + @${CP} ${FILESDIR}/INSTALL ${FILESDIR}/DEINSTALL ${PKGDIR} + @${MV} ${FILESDIR}/${MHPOSTPROC} ${FILESDIR}/MH-postproc post-install: - @strip ${PREFIX}/bin/mewencode -.for f in mewencode mew-refile uumerge vscan - @chown bin:bin ${PREFIX}/bin/${f} - @chmod 555 ${PREFIX}/bin/${f} -.endfor - @${INSTALL_DATA} ${WRKSRC}/info/mew.info* ${PREFIX}/info + @${INSTALL_DATA} ${WRKSRC}/${EMACSEL} ${ELISPDIR}/mew + @${INSTALL_DATA} ${WRKSRC}/info/mew.info* \ + ${WRKSRC}/info/mew.jis.info* ${INFODIR} @${INSTALL_SCRIPT} ${FILESDIR}/MH-postproc ${PREFIX}/bin .if !defined(NOPORTDOCS) - @${MKDIR} ${DOCDIR} - @${INSTALL_DATA} ${WRKSRC}/info/*.texi ${DOCDIR} + @${MKDIR} ${PORTSDOCDIR} + @${INSTALL_DATA} ${WRKSRC}/info/*.texi ${PORTSDOCDIR} @${MKDIR} ${SAMPLEDIR} -.for f in dot.emacs aliases dot.mh_profile scan.form +.for f in ${DOTEMACS} aliases ${DOTMHPROFILE} ${SCANFORM} @${INSTALL_DATA} ${FILESDIR}/${f} ${SAMPLEDIR} .endfor + @${MV} ${SAMPLEDIR}/${DOTEMACS} ${SAMPLEDIR}/dot.emacs + @${MV} ${SAMPLEDIR}/${SCANFORM} ${SAMPLEDIR}/scan.form + @${MV} ${SAMPLEDIR}/${DOTMHPROFILE} ${SAMPLEDIR}/dot.mh_profile @${INSTALL_SCRIPT} ${FILESDIR}/user-install ${SAMPLEDIR} .endif - @${SETENV} PKG_PREFIX=${PREFIX} /bin/sh ${PKGDIR}/INSTALL ${PKGNAME} POST-INSTALL + @${SETENV} TOUCH=${TOUCH} INFODIR=${INFODIR} \ + ELISPDIR=${ELISPDIR} DIRSECTION="${DIRSECTION}" \ + INFOFILE=${INFOFILE} /bin/sh ${PKGDIR}/INSTALL \ + ${PKGNAME} POST-INSTALL + +pre-clean: + @${RM} -f ${FILESDIR}/user-install ${FILESDIR}/MH-postproc \ + ${FILESDIR}/INSTALL ${FILESDIR}/DEINSTALL \ + ${PKGDIR}/INSTALL ${PKGDIR}/DEINSTALL .include diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/DEINSTALL.tmpl ./files/DEINSTALL.tmpl --- ../../current/ports/japanese/mew/files/DEINSTALL.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/DEINSTALL.tmpl Sat May 31 20:25:47 1997 @@ -0,0 +1,21 @@ +#!/bin/sh + +infodir=${INFODIR:-%INFODIR%} +infofile=${INFOFILE:-%INFOFILE%} +elispdir=${ELISPDIR:-%ELISPDIR%} + +OptionStart=";;; Mew configuration options" +OptionEnd=";;; End of Mew configuration options" + +if [ "X$2" = X"DEINSTALL" ]; then + echo "Deleting \"Mew\" entry from ${infodir}/dir" + install-info --delete ${infodir}/${infofile} ${infodir}/dir + if [ "`grep \"^${OptionStart}\" ${elispdir}/site-start.el`" ]; then + echo "Deleting \"Mew\" entry from ${elispdir}/site-start.el" + sed -e "/^${OptionStart}/,/^${OptionEnd}/d" \ + ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak + mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el + fi +else + exit 0 +fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/INSTALL.tmpl ./files/INSTALL.tmpl --- ../../current/ports/japanese/mew/files/INSTALL.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/INSTALL.tmpl Sat May 31 20:25:30 1997 @@ -0,0 +1,52 @@ +#!/bin/sh + +TOUCH=${TOUCH:-%TOUCH%} + +infodir=${INFODIR:-%INFODIR%} +infofile=${INFOFILE:-%INFOFILE%} +elispdir=${ELISPDIR:-%ELISPDIR%} + +dirsection=${DIRSECTION:-%DIRSECTION%} + +OptionStart=";;; Mew configuration options" +OptionEnd=";;; End of Mew configuration options" + +if [ "X$2" = X"POST-INSTALL" ]; then + if [ ! -f ${elispdir}/site-start.el ]; then + ${TOUCH} ${elispdir}/site-start.el + fi + if [ ! "`grep \"START-INFO-DIR-ENTRY\" ${infodir}/${infofile}`" ]; then + echo "INFO-DIR-SECTION ${dirsection}" \ + >> ${infodir}/${infofile} + echo "START-INFO-DIR-ENTRY" >> ${infodir}/${infofile} + echo "* Mew: (`basename ${infofile} .info`). Message interface to Emacs Window." \ + >> ${infodir}/${infofile} + echo "END-INFO-DIR-ENTRY" >> ${infodir}/${infofile} + fi + echo "Adding \"Mew\" to ${infodir}/dir" + install-info ${infodir}/${infofile} ${infodir}/dir + if [ "`grep \"^${OptionStart}\" ${elispdir}/site-start.el`" ]; then + sed -e "/^${OptionStart}/,/^${OptionEnd}/d" \ + ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak + mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el + fi + echo "Adding \"Mew\" entry to ${elispdir}/site-start.el" + echo "${OptionStart}" >> ${elispdir}/site-start.el + echo "(setq load-path (cons \"${elispdir}/mew\" load-path))" \ + >> ${elispdir}/site-start.el + echo "(setq mew-init-hook" >> ${elispdir}/site-start.el + echo " (function" >> ${elispdir}/site-start.el + echo " (lambda ()" >> ${elispdir}/site-start.el + echo " (setq kill-emacs-hook" >> ${elispdir}/site-start.el + echo " (function mew-mark-process-all-folders)))))" \ + >> ${elispdir}/site-start.el + echo "(autoload 'mew \"mew\" nil t)" \ + >> ${elispdir}/site-start.el + echo "(autoload 'mew-send \"mew\" nil t)" \ + >> ${elispdir}/site-start.el + echo "${OptionEnd}" \ + >> ${elispdir}/site-start.el + exit 0 +else + exit 0 +fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/MH-postproc ./files/MH-postproc --- ../../current/ports/japanese/mew/files/MH-postproc Wed Dec 18 14:08:39 1996 +++ ./files/MH-postproc Thu Jan 1 09:00:00 1970 @@ -1,12 +0,0 @@ -#!/bin/sh - -while [ $# != 1 ] -do - args="$args $1" - shift -done - -/usr/local/bin/nkf -e $1 >> $HOME/Mail/.mailpost -/usr/local/bin/nkf -j $1 > $HOME/Mail/lastpost -args="$args $HOME/Mail/lastpost" -/usr/local/lib/mh/post $args diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/MH-postproc.jp.tmpl ./files/MH-postproc.jp.tmpl --- ../../current/ports/japanese/mew/files/MH-postproc.jp.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/MH-postproc.jp.tmpl Mon May 5 16:53:59 1997 @@ -0,0 +1,12 @@ +#!/bin/sh + +while [ $# != 1 ] +do + args="$args $1" + shift +done + +%PREFIX%/bin/nkf -e $1 >> $HOME/Mail/.mailpost +%PREFIX%/bin/nkf -j $1 > $HOME/Mail/lastpost +args="$args $HOME/Mail/lastpost" +%PREFIX%/lib/mh/post $args diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/MH-postproc.tmpl ./files/MH-postproc.tmpl --- ../../current/ports/japanese/mew/files/MH-postproc.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/MH-postproc.tmpl Sun Jun 1 22:32:38 1997 @@ -0,0 +1,12 @@ +#!/bin/sh + +while [ $# != 1 ] +do + args="$args $1" + shift +done + +/bin/cat $1 >> $HOME/Mail/.mailpost +/bin/cp $1 $HOME/Mail/lastpost +args="$args $HOME/Mail/lastpost" +%PREFIX%/lib/mh/post $args diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/MH-postproc.tmpl~ ./files/MH-postproc.tmpl~ --- ../../current/ports/japanese/mew/files/MH-postproc.tmpl~ Thu Jan 1 09:00:00 1970 +++ ./files/MH-postproc.tmpl~ Mon May 5 16:53:59 1997 @@ -0,0 +1,12 @@ +#!/bin/sh + +while [ $# != 1 ] +do + args="$args $1" + shift +done + +/bin/cat $1 >> $HOME/Mail/.mailpost +/bin/cp $1 $HOME/Mail/lastpost +args="$args $HOME/Mail/lastpost" +%PREFIX%/lib/mh/post $args diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/aliases ./files/aliases --- ../../current/ports/japanese/mew/files/aliases Wed Dec 18 14:08:39 1996 +++ ./files/aliases Mon May 5 16:53:59 1997 @@ -1,6 +1,6 @@ ; See comments at end of this file ; This file is almost empty as MH now supports personal aliases. -; @(#)$Id: aliases,v 1.1.1.1 1996/12/18 05:08:39 asami Exp $ +; @(#)$Id: aliases,v 1.1.1.1 1996/12/18 05:09:26 asami Exp $ ;everyone: * diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/dot.emacs ./files/dot.emacs --- ../../current/ports/japanese/mew/files/dot.emacs Sat Jan 4 01:35:37 1997 +++ ./files/dot.emacs Mon May 5 16:53:59 1997 @@ -1,40 +1,42 @@ ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Mew ;;;;;;;;; -;; Mew (Ver.1.54) ;; +;; Mew (Ver.%version%) ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; (setq mew-mail-domain-list '("%nameserver%")) (cond ((and window-system (string-match "^19" emacs-version)) - (setq hilit-mode-enable-list nil - hilit-background-mode 'light - hilit-inhibit-hooks nil - hilit-inhibit-rebinding nil) + (setq hilit-mode-enable-list nil + hilit-background-mode 'light + hilit-inhibit-hooks nil + hilit-inhibit-rebinding nil) (require 'hilit19) ;; (add-hook 'mew-message-hook - 'hilit-rehighlight-buffer-quietly) - (hilit-set-mode-patterns + 'hilit-rehighlight-buffer-quietly) + (hilit-set-mode-patterns '(mew-message-mode) '(("^Subject:.*$" nil msg-subject) - ("^From:.*$" nil msg-from) - ("^X-.*:.*$" nil msg-quote) - ("^>.*$" nil msg-quote) - ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) + ("^From:.*$" nil msg-from) + ("^X-.*:.*$" nil msg-quote) + ("^[A-Za-z\-]*>.*$" nil msg-quote) + ("^ [\*].*$" nil msg-quote) + ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) ;; (add-hook 'mew-draft-mode-hook - 'hilit-rehighlight-buffer-quietly) - (hilit-set-mode-patterns + 'hilit-rehighlight-buffer-quietly) + (hilit-set-mode-patterns '(mew-draft-mode) '(("^Subject:.*$" nil msg-subject) - ("^From:.*$" nil msg-from) - ("^X-.*:.*$" nil msg-quote) - ("^>.*$" nil msg-quote) - ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) - ) -) + ("^From:.*$" nil msg-from) + ("^[A-Za-z\-]*>.*$" nil msg-quote) + ("^ [\*].*$" nil msg-quote) + ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) + ) + ) +(setq mew-underline-lines-use t) (setq mew-cite-fields '("Message-ID:" "From:")) -(setq mew-cite-format "Message-ID: %s ¤Îµ­»ö¤Ë¤Æ\n%s ¤µ¤ó¤Ï½ñ¤«¤ì¤Þ¤·¤¿ :\n\n") +(setq mew-cite-format "In %s \n%s writes :\n\n") (setq mew-signature-insert-last t) (add-hook 'mew-send-hook 'mew-draft-insert-signature) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/dot.emacs.jp ./files/dot.emacs.jp --- ../../current/ports/japanese/mew/files/dot.emacs.jp Thu Jan 1 09:00:00 1970 +++ ./files/dot.emacs.jp Mon May 5 16:53:59 1997 @@ -0,0 +1,47 @@ +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; Mew ;;;;;;;;; +;; Mew (Ver.%version%) ;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +(setq mew-mail-domain-list + '("%nameserver%")) + +(cond + ((and window-system (string-match "^19" emacs-version)) + (setq hilit-mode-enable-list nil + hilit-background-mode 'light + hilit-inhibit-hooks nil + hilit-inhibit-rebinding nil) + (require 'hilit19) + ;; + (add-hook 'mew-message-hook + 'hilit-rehighlight-buffer-quietly) + (hilit-set-mode-patterns + '(mew-message-mode) + '(("^Subject:.*$" nil msg-subject) + ("^From:.*$" nil msg-from) + ("^X-.*:.*$" nil msg-quote) + ("^[A-Za-z\-¤¡-¥ö°¡-ßæ]*>.*$" nil msg-quote) + ("^¡ä.*$" nil msg-quote) + ("^¡Ã.*$" nil msg-quote) + ("^ [\*].*$" nil msg-quote) + ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) + ;; + (add-hook 'mew-draft-mode-hook + 'hilit-rehighlight-buffer-quietly) + (hilit-set-mode-patterns + '(mew-draft-mode) + '(("^Subject:.*$" nil msg-subject) + ("^From:.*$" nil msg-from) + ("^[A-Za-z\-¤¡-¥ö°¡-ßæ]*>.*$" nil msg-quote) + ("^¡ä.*$" nil msg-quote) + ("^¡Ã.*$" nil msg-quote) + ("^ [\*].*$" nil msg-quote) + ("^[A-Za-z][A-Za-z0-9-]+:" nil msg-header))) + ) + ) +(setq mew-underline-lines-use t) +(setq mew-cite-fields '("Message-ID:" "From:")) +(setq mew-cite-format "Message-ID: %s ¤Îµ­»ö¤Ë¤Æ\n%s ¤µ¤ó¤Ï½ñ¤«¤ì¤Þ¤·¤¿ :\n\n") +(setq mew-signature-insert-last t) +(add-hook 'mew-send-hook 'mew-draft-insert-signature) + +;; Mew end diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/dot.mh_profile ./files/dot.mh_profile --- ../../current/ports/japanese/mew/files/dot.mh_profile Sat Jan 4 01:35:37 1997 +++ ./files/dot.mh_profile Mon May 5 16:53:59 1997 @@ -1,17 +1,13 @@ Path: Mail postproc: MH-postproc -file-coding: ja_JP.jis7 -display-coding: ja_JP.jis7 Draft-Folder: drafts -rmmprocc: /usr/local/bin/rmm +rmmprocc: %prefix%/bin/rmm Msg-Protect: 600 Folder-Protect: 700 Draft-Protect: 600 automhnproc: mhn Aliasfile: aliases Signature: %signature% -send: -hencode -whom: -hencode show: -showproc mhl inc: -form scan.form scan: -form scan.form diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/dot.mh_profile.jp ./files/dot.mh_profile.jp --- ../../current/ports/japanese/mew/files/dot.mh_profile.jp Thu Jan 1 09:00:00 1970 +++ ./files/dot.mh_profile.jp Mon May 5 16:53:59 1997 @@ -0,0 +1,18 @@ +Path: Mail +postproc: MH-postproc +file-coding: ja_JP.jis7 +display-coding: ja_JP.jis7 +process-coding: ja_JP.jis7 +Draft-Folder: drafts +rmmprocc: %prefix%/bin/rmm +Msg-Protect: 600 +Folder-Protect: 700 +Draft-Protect: 600 +automhnproc: mhn +Aliasfile: aliases +Signature: %signature% +send: -hencode +whom: -hencode +show: -showproc mhl +inc: -form scan.form +scan: -form scan.form diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/md5 ./files/md5 --- ../../current/ports/japanese/mew/files/md5 Wed Dec 18 14:08:39 1996 +++ ./files/md5 Mon May 5 16:53:59 1997 @@ -1 +1 @@ -MD5 (mew-1.54.tar.gz) = 30176845076fe96a4bc5b7b253f126f0 +MD5 (mew-1.70.tar.gz) = 4a2b710da18a5a3489ec6995d673b2bd diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/scan.form ./files/scan.form --- ../../current/ports/japanese/mew/files/scan.form Wed Dec 18 14:08:39 1996 +++ ./files/scan.form Mon May 5 16:53:59 1997 @@ -1,6 +1,4 @@ -%4(msg)%<(cur)+%| %>%<{replied}-%|%<{encrypted}E%|\ -%<(eq)%(trim{content-type})%<(amatch multipart)M%| %>%>%>%>\ +%5(msg)%<(cur)+%| %>%<{replied}-%?{encrypted}E%| %>\ %02(mon{date})/%02(mday{date})%<{date} %|*%>\ -%<(mymbox{from})%<{to}To:%14(hdecode(friendly{to}))%>%>\ -%<(zero)%17(hdecode(friendly{from}))%> \ -%(hdecode{subject})%<{body}<<%{body}%> +%<(mymbox{from})%<{to}To:%14(friendly{to})%>%>%<(zero)%17(friendly{from})%>\ +%{subject}%<{body}<<%{body}>>%> diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/scan.form.jp ./files/scan.form.jp --- ../../current/ports/japanese/mew/files/scan.form.jp Thu Jan 1 09:00:00 1970 +++ ./files/scan.form.jp Mon May 5 16:53:59 1997 @@ -0,0 +1,6 @@ +%5(msg)%<(cur)+%| %>%<{replied}-%|%<{encrypted}E%|\ +%<(eq)%(trim{content-type})%<(amatch multipart)M%| %>%>%>%>\ +%02(mon{date})/%02(mday{date})%<{date} %|*%>\ +%<(mymbox{from})%<{to}To:%14(hdecode(friendly{to}))%>%>\ +%<(zero)%17(hdecode(friendly{from}))%> \ +%(hdecode{subject})%<{body}<<%{body}%> diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/user-install ./files/user-install --- ../../current/ports/japanese/mew/files/user-install Sat Jan 4 01:35:38 1997 +++ ./files/user-install Thu Jan 1 09:00:00 1970 @@ -1,107 +0,0 @@ -#!/bin/sh - -PREFIX=/usr/local -DIALOG=/usr/bin/dialog -SAMPLEDIR=${PREFIX}/share/examples/mew - -case ${TERM} in -emacs) - echo "Here is \"Emacs\" shell. Try on other terminal." - exit 1 - ;; -esac - -MainMenu="This is a Set up Menu for specifying the User mail environment \n\ -correctly. You must at least name server IP address and your \n\ -signature. \n\ -Please specify these issues by selecting followng items." - -NameserverMenu="Specify your Name server IP address you refer." - -SignatureMenu="Specify your Signature Mew add when posting" - -nameserver="" -signature="" - -answer=None -while [ ! X"${answer}" = "XQuit" ]; do - ${DIALOG} --title "Mew Set up User Environment" \ - --hline "Select Set up Items" \ - --hfile printer_cfg.hlp \ - --menu "${MainMenu}" -1 -1 3 \ - Nameserver "Set the Name server IP address you refer" \ - Signature "Set your Signature Mew adds at posting" \ - Quit "Quit this menu" \ - 2> /tmp/menu.tmp.$$ - retval=$? - answer=`cat /tmp/menu.tmp.$$` - rm -f /tmp/menu.tmp.$$ - case $retval in - 0) if [ -z ${answer} ]; then - echo "Nothing selected" - exit 1 - fi - ;; - 1) echo "Cancel pressed." - exit 1 - ;; - esac - case ${answer} in - Nameserver) - if [ ! -z "${nameserver}" ]; then - ${DIALOG} --title "Confirm Name server" \ - --hline "Press Yes/No" \ - --hfile printer_cfg.hlp \ - --yesno "Your Name server has set \"${nameserver}\". Is this OK?" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Enter your Name server IP address" \ - --hline "Write your name server" \ - --hfile printer_cfg.hlp \ - --inputbox "${NameserverMenu}" -1 -1 \ - 2> /tmp/input.tmp.$$ - nameserver=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - Signature) - if [ ! -z "${signature}" ]; then - ${DIALOG} --title "Confirm your Signature" \ - --hline "Press Yes/No" \ - --hfile printer_cfg.hlp \ - --yesno "Your Signature has set \"${signature}\". Is this OK?" -1 -1 - retval=$? - if [ X"${retval}" = "X0" ]; then continue; fi - fi - ${DIALOG} --title "Set Your Signature" \ - --hline "Write your Signature" \ - --hfile printer_cfg.hlp \ - --inputbox "${SignatureMenu}" -1 -1 \ - 2> /tmp/input.tmp.$$ - signature=`cat /tmp/input.tmp.$$` - rm -f /tmp/input.tmp.$$ - ;; - esac -done - -if [ ! -d ${HOME}/Mail ]; then ${PREFIX}/bin/inc; fi -if [ ! -d ${HOME}/Mail/drafts ]; then mkdir -p ${HOME}/Mail/drafts; fi - -cp ${HOME}/.emacs ${HOME}/.emacs.org.$$ -sed -e '/^;;* Mew ;*$/,/^;; *Mew end$/d' < ${HOME}/.emacs.org.$$ \ - > ${HOME}/.emacs -sed -e "s/%nameserver%/${nameserver}/g" < ${SAMPLEDIR}/dot.emacs > /tmp/.emacs.$$ -cat /tmp/.emacs.$$ >> ${HOME}/.emacs -rm -f /tmp/.emacs.$$ - -if [ -f ${HOME}/.mh_profile ]; then - mv ${HOME}/.mh_profile ${HOME}/.mh_profile.org.$$ -fi -sed -e "s/%signature%/${signature}/g" < ${SAMPLEDIR}/dot.mh_profile \ - > ${HOME}/.mh_profile - -if [ -f ${HOME}/Mail/scan.form ]; then - mv ${HOME}/Mail/scan.form ${HOME}/Mail/scan.form.org.$$ -fi -cp ${SAMPLEDIR}/scan.form ${HOME}/Mail/scan.form - diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/files/user-install.tmpl ./files/user-install.tmpl --- ../../current/ports/japanese/mew/files/user-install.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/user-install.tmpl Sat May 31 16:10:41 1997 @@ -0,0 +1,147 @@ +#!/bin/sh + +PREFIX=%PREFIX% +SAMPLEDIR=%SAMPLEDIR% + +SED=/usr/bin/sed +DIALOG=/usr/bin/dialog + +case ${TERM} in +emacs) + echo "Here is \"Emacs\" shell. Try on other terminal." + exit 1 + ;; +esac + +MainMenu="This is a Set up Menu for specifying the User mail environment \n\ +correctly. You must at least name server Domain name and your \n\ +signature. \n\ +Please specify these issues by selecting followng items." + +NameserverMenu="Specify your Name server Domain name you refer." + +SignatureMenu="Specify your Signature Mew add when posting" + +version="%VERSION%" +nameserver="" +signature="" + +CPFILES="${SAMPLEDIR}/scan.form ${HOME}/Mail/scan.form + ${SAMPLEDIR}/dot.emacs /tmp/.emacs.mew ${HOME}/.emacs + ${SAMPLEDIR}/dot.mh_profile ${HOME}/.mh_profile" + +SEDARG='-e \"s@%prefix%@${PREFIX}@g\" + -e \"s@%version%@${version}@g\" + -e \"s@%nameserver%@${nameserver}@g\" + -e \"s@%signature%@${signature}@g\"' + +### +### Set user environment : nameserver, signature +### + +answer=None +while [ ! X"${answer}" = "XQuit" ]; do + ${DIALOG} --title "Mew Set up User Environment" \ + --hline "Select Set up Items" \ + --hfile printer_cfg.hlp \ + --menu "${MainMenu}" -1 -1 3 \ + Nameserver "Set the Name server Domain name you refer" \ + Signature "Set your Signature Mew adds at posting" \ + Quit "Quit this menu" \ + 2> /tmp/menu.tmp.$$ + retval=$? + answer=`cat /tmp/menu.tmp.$$` + rm -f /tmp/menu.tmp.$$ + case $retval in + 0) if [ -z ${answer} ]; then + echo "Nothing selected" + exit 1 + fi + ;; + 1) echo "Cancel pressed." + exit 1 + ;; + esac + case ${answer} in + Nameserver) + if [ ! -z "${nameserver}" ]; then + ${DIALOG} --title "Confirm Name server" \ + --hline "Press Yes/No" \ + --hfile printer_cfg.hlp \ + --yesno "Your Name server has set \"${nameserver}\". Is this OK?" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Enter your Name server IP address" \ + --hline "Write your name server" \ + --hfile printer_cfg.hlp \ + --inputbox "${NameserverMenu}" -1 -1 \ + 2> /tmp/input.tmp.$$ + nameserver=`cat /tmp/input.tmp.$$` + rm -f /tmp/input.tmp.$$ + ;; + Signature) + if [ ! -z "${signature}" ]; then + ${DIALOG} --title "Confirm your Signature" \ + --hline "Press Yes/No" \ + --hfile printer_cfg.hlp \ + --yesno "Your Signature has set \"${signature}\". Is this OK?" -1 -1 + retval=$? + if [ X"${retval}" = "X0" ]; then continue; fi + fi + ${DIALOG} --title "Set Your Signature" \ + --hline "Write your Signature" \ + --hfile printer_cfg.hlp \ + --inputbox "${SignatureMenu}" -1 -1 \ + 2> /tmp/input.tmp.$$ + signature=`cat /tmp/input.tmp.$$` + rm -f /tmp/input.tmp.$$ + ;; + esac +done +### +### When 1st installation, do "inc" and make "drafts" directory. +### + +if [ ! -d ${HOME}/Mail ]; then ${PREFIX}/bin/inc; fi +if [ ! -d ${HOME}/Mail/drafts ]; then mkdir -p ${HOME}/Mail/drafts; fi + +### +### Copy "aliases" if none +### + +if [ ! -f ${HOME}/Mail/aliases ]; then + cp ${SAMPLEDIR}/aliases ${HOME}/Mail +fi + +### +### Backup ".mh_profile", ".emacs", "scan.form" +### + +chk_files=`echo "${CPFILES}" \ + | awk '$3 == "" || $2 == $3{print $2; next}{print $3}` + +for f in ${chk_files}; do + if [ -f ${f} ]; then cp ${f} ${f}.$$ ; fi +done + +### +### Set ".mh_profile", ".emacs" with correct variables . +### + +sed -e '/^;;* Mew ;*$/,/^;; *Mew end$/d' < ${HOME}/.emacs \ + > /tmp/.emacs + +sedcmd=`eval echo ${SED} ${SEDARG}` +echo "${CPFILES}" | awk -v sedcmd="${sedcmd}" \ + '{sedexe = sedcmd "<" $1 ">" $2; system(sedexe)}' + +dot_emacs=`echo "${CPFILES}" |\ + awk '$2~/^.*\/\.emacs.*$/{ + print substr($2,match($2,/\/dot\.emacs.*$/)+1,length($2))}'` +for f in ${dot_emacs}; do + cat ${f} >> /tmp/.emacs +done +cp /tmp/.emacs ${HOME}/.emacs + +rm -f /tmp/.emacs ${dot_emacs} /tmp/.mh_profile diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/patches/patch-aa ./patches/patch-aa --- ../../current/ports/japanese/mew/patches/patch-aa Sat Jan 4 01:19:40 1997 +++ ./patches/patch-aa Sat May 31 20:30:02 1997 @@ -1,12 +1,10 @@ ---- Makefile.orig Tue Nov 26 01:34:44 1996 -+++ Makefile Sun Dec 29 04:11:55 1996 -@@ -15,21 +15,21 @@ +--- Makefile~ Sun Mar 23 10:21:27 1997 ++++ Makefile Sat Apr 26 13:39:02 1997 +@@ -16,20 +16,20 @@ CC = gcc CFLAGS = -O -BINDIR = /usr/local/bin --MAKEFLAGS = CFLAGS="$(CFLAGS)" CC=$(CC) -+PREFIX?= /usr/local +BINDIR = ${PREFIX}/bin ## @@ -14,34 +12,26 @@ ## #EMACS = emacs - #EMACS = xemacs - EMACS = mule +-EMACS = xemacs +-#EMACS = mule ++#EMACS = xemacs ++EMACS = ${EMACSCMD} #EMACS = mule2 #EMACS = mule19 #ELISPDIR = /usr/local/share/emacs/site-lisp -ELISPDIR = /usr/local/lib/$(EMACS)/site-lisp -+ELISPDIR = /usr/local/lib/$(EMACS)/site-lisp/mew ++ELISPDIR ?= /usr/local/lib/$(EMACS)/site-lisp #ELISPDIR = /usr/local/lib/emacs -@@ -46,7 +45,7 @@ - $(EMACS) -batch -l ./$(LDPATH) -l ./mew.el -f batch-byte-compile $< - - all: $(TARGETS) $(MEW) -- cd $(BIN); $(MAKE) $(MAKEFLAGS) -+ cd $(BIN); $(MAKE) CFLAGS="$(CFLAGS)" CC="$(CC)" - - $(TARGETS): $(LDPATH) mew.el - -@@ -57,8 +57,9 @@ +@@ -65,7 +65,8 @@ $(EMACS) -batch -l ./$(LDPATH) -l ./mew-attach.el -f batch-byte-compile mew.el install: $(TARGETS) $(MEW) -+ if [ ! -d $(ELISPDIR) ]; then mkdir -p $(ELISPDIR); else true; fi ; - cp $(MEW) $(TARGETS) $(ELISPDIR) -- cd $(BIN); $(MAKE) $(MAKEFLAGS) -+ cd $(BIN); $(MAKE) install CFLAGS="$(CFLAGS)" CC="$(CC)" BINDIR="$(BINDIR)" +- cp $(MEW) $(TARGETS) $(SRCS) $(ELISPDIR) ++ ${MKDIR} $(ELISPDIR) ++ ${INSTALL_DATA} $(MEW) $(TARGETS) $(ELISPDIR) + cd $(BIN); $(MAKE) install CFLAGS="$(CFLAGS)" CC="$(CC)" BINDIR="$(BINDIR)" clean: - $(RM) $(MEW) $(TARGETS) $(LDPATH) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/patches/patch-ab ./patches/patch-ab --- ../../current/ports/japanese/mew/patches/patch-ab Sat Jan 4 01:38:38 1997 +++ ./patches/patch-ab Mon May 5 16:54:13 1997 @@ -1,16 +1,15 @@ ---- bin/Makefile.orig Tue Nov 26 01:34:52 1996 -+++ bin/Makefile Fri Jan 3 23:45:19 1997 -@@ -7,7 +7,8 @@ +--- bin/Makefile~ Tue Nov 26 01:34:52 1996 ++++ bin/Makefile Sat Apr 26 13:42:22 1997 +@@ -7,7 +7,7 @@ CNF = config.status config.cache config.log RM = rm -f -BINDIR = /usr/local/bin -+PREFIX?= /usr/local +BINDIR = ${PREFIX}/bin #CFLAGS = -g -@@ -17,8 +18,8 @@ +@@ -17,8 +17,8 @@ $(CC) -o $@ $(OBJ) $(RM) $(AL1) $(RM) $(AL2) @@ -21,3 +20,18 @@ $(OTH) : ./configure +@@ -26,10 +26,10 @@ + install: $(PRG) $(OTH) + $(RM) $(BINDIR)/$(AL1) + $(RM) $(BINDIR)/$(AL2) +- cp $(PRG) $(BINDIR) +- ln $(BINDIR)/$(PRG) $(BINDIR)/$(AL1) +- ln $(BINDIR)/$(PRG) $(BINDIR)/$(AL2) +- cp $(OTH) $(BINDIR) ++ ${INSTALL_PROGRAM} $(PRG) $(BINDIR) ++ ln -fs $(BINDIR)/$(PRG) $(BINDIR)/$(AL1) ++ ln -fs $(BINDIR)/$(PRG) $(BINDIR)/$(AL2) ++ ${INSTALL_SCRIPT} $(OTH) $(BINDIR) + + clean: + $(RM) $(OBJ) $(PRG) $(AL1) $(AL2) $(CNF) $(OTH) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/patches/patch-ac ./patches/patch-ac --- ../../current/ports/japanese/mew/patches/patch-ac Thu Jan 1 09:00:00 1970 +++ ./patches/patch-ac Mon May 5 16:54:13 1997 @@ -0,0 +1,15 @@ +=================================================================== +RCS file: RCS/mew-draft.el,v +retrieving revision 1.1 +diff -u -r1.1 mew-draft.el +--- mew-draft.el 1997/04/21 04:46:50 1.1 ++++ mew-draft.el 1997/04/21 04:47:20 +@@ -348,6 +348,8 @@ + (setq file-coding-system-for-read mew-cs-autoconv) + (setq file-coding-system mew-cs-draft)) + ((equal mew-mule-version 3) ++ (make-local-variable 'coding-system-for-read) ++ (make-local-variable 'coding-system-for-write) + (setq coding-system-for-read mew-cs-autoconv) + (setq coding-system-for-write mew-cs-draft)) + ) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/patches/patch-ad ./patches/patch-ad --- ../../current/ports/japanese/mew/patches/patch-ad Thu Jan 1 09:00:00 1970 +++ ./patches/patch-ad Mon May 5 16:54:13 1997 @@ -0,0 +1,11 @@ +--- mew-summary.el Tue Apr 22 01:44:42 1997 ++++ mew-summary.el Tue Apr 22 02:03:44 1997 +@@ -1962,7 +1962,7 @@ + (widen) + (erase-buffer) + (insert-file-contents target) +- (setq syntax (mew-decode (mew-decode-syntax-rfc822-head) t)) ++ (setq syntax (mew-decode-message (mew-decode-syntax-rfc822-head) t)) + (setq multi (mew-syntax-get-part syntax)) + (if (not (mew-syntax-multipart-p multi)) + (message "Can't burst") diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/patches/patch-ae ./patches/patch-ae --- ../../current/ports/japanese/mew/patches/patch-ae Thu Jan 1 09:00:00 1970 +++ ./patches/patch-ae Mon May 5 16:54:13 1997 @@ -0,0 +1,18 @@ +=================================================================== +RCS file: RCS/mew-decode.el,v +retrieving revision 1.2 +diff -u -r1.2 mew-decode.el +--- mew-decode.el 1997/04/23 00:49:09 1.2 ++++ mew-decode.el 1997/04/23 05:25:23 +@@ -751,7 +751,10 @@ + )) + (if (not mew-field-other-visible) + (and others (insert others))) +- (recenter 0) ++ (if (save-excursion ++ (set-buffer (window-buffer (previous-window))) ++ mew-summary-buffer-disp-msg) ++ (recenter 0)) + (setq n 0) + (while (< n len) + (if (aref visible n) (insert (aref visible n))) diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/patches/patch-af ./patches/patch-af --- ../../current/ports/japanese/mew/patches/patch-af Thu Jan 1 09:00:00 1970 +++ ./patches/patch-af Mon May 5 16:54:13 1997 @@ -0,0 +1,76 @@ +=================================================================== +RCS file: RCS/mew-summary.el,v +retrieving revision 1.2 +diff -c -r1.2 mew-summary.el +*** mew-summary.el 1997/04/23 04:09:21 1.2 +--- mew-summary.el 1997/04/23 07:21:46 +*************** +*** 881,906 **** + (funcall program begin end params execute)) + (t + (funcall program begin end params)))) +! (save-excursion +! (set-buffer (mew-current-get 'cache)) +! (if (not (mew-which program exec-path)) +! (message "Program %s is not found" program) +! (if (not (or mew-icon-p +! ;; gee, the following has a bug that multipart +! ;; icons disappear from toolbar... +! ;;(and mew-icon-p (button-event-p last-command-event)) +! (mew-y-or-n-p (format "Start %s? " program)))) +! () + (if (not (file-exists-p mew-temp-dir)) + (mew-make-directory mew-temp-dir)) ;; just in case + (setq file (make-temp-name mew-temp-file)) + ;; NEVER use call-process-region for privary reasons + (mew-flet + (write-region begin end file)) + (if async + (mew-mime-start-process program options file) + (mew-mime-call-process program options file)) +! )))) + (mew-current-set 'part num) ;; should be after funcall + (if non-erase + () +--- 881,921 ---- + (funcall program begin end params execute)) + (t + (funcall program begin end params)))) +! (if (not (mew-which program exec-path)) +! (message "Program %s is not found" program) +! (save-excursion +! (set-buffer (mew-buffer-message)) +! (let ((buffer-read-only nil)) +! (insert " ##### ##### #### #### ##### ## # #\n" +! " # # # # # # # # # # # # ## ##\n" +! " # # # # # # # # # # # # ## #\n" +! " ##### ##### # # # ### ##### ###### # #\n" +! " # # # # # # # # # # # # #\n" +! " # # # #### #### # # # # # #\n" +! "\n\n") +! (insert (format "Content-Type:\t%s\n" ct)) +! (insert (format "Size:\t\t%dbytes\n" (- end begin))) +! (insert (format "Program:\t%s\n" program)) +! (if (not (and execute +! (or mew-icon-p +! ;; gee, the following has a bug that multipart +! ;; icons disappear from toolbar... +! ;;(and mew-icon-p (button-event-p last-command-event)) +! (mew-y-or-n-p (format "Start %s? " program))))) +! (insert "\nTo execute this external command, type " +! (substitute-command-keys +! "\\\\[mew-summary-execute-external].")) + (if (not (file-exists-p mew-temp-dir)) + (mew-make-directory mew-temp-dir)) ;; just in case + (setq file (make-temp-name mew-temp-file)) ++ (set-buffer (mew-current-get 'cache)) + ;; NEVER use call-process-region for privary reasons + (mew-flet + (write-region begin end file)) + (if async + (mew-mime-start-process program options file) + (mew-mime-call-process program options file)) +! ))))) + (mew-current-set 'part num) ;; should be after funcall + (if non-erase + () diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/pkg/DEINSTALL ./pkg/DEINSTALL --- ../../current/ports/japanese/mew/pkg/DEINSTALL Sat Jan 4 01:35:40 1997 +++ ./pkg/DEINSTALL Thu Jan 1 09:00:00 1970 @@ -1,25 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -elispdir=${PKG_PREFIX}/lib/mule/site-lisp - -OptionStart=";;; Mew configuration options" -OptionEnd=";;; End of Mew configuration options" - -if [ "X$2" = X"DEINSTALL" ]; then - a=`grep Mew ${infodir}/dir` - if [ "${a}" ]; then - echo "Deleting \"Mew\" entry from ${infodir}/dir" - grep -v "^\* Mew:" ${infodir}/dir > ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - fi - a=`grep "^${OptionStart}" ${elispdir}/site-start.el` - if [ "${a}" ]; then - echo "Deleting \"Mew\" entry from ${elispdir}/site-start.el" - sed -e "/^${OptionStart}/,/^${OptionEnd}/d" \ - ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - fi -else - exit 0 -fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/pkg/DESCR ./pkg/DESCR --- ../../current/ports/japanese/mew/pkg/DESCR Sat Jan 4 01:35:41 1997 +++ ./pkg/DESCR Sat Apr 26 16:34:39 1997 @@ -1,4 +1,4 @@ -Mew (1.54) is a "Message interface to Emacs Window" to integrate +Mew is a "Message interface to Emacs Window" to integrate - electronic mail - NetNews diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/pkg/INSTALL ./pkg/INSTALL --- ../../current/ports/japanese/mew/pkg/INSTALL Sat Jan 4 01:35:43 1997 +++ ./pkg/INSTALL Thu Jan 1 09:00:00 1970 @@ -1,43 +0,0 @@ -#!/bin/sh - -infodir=${PKG_PREFIX}/info -elispdir=${PKG_PREFIX}/lib/mule/site-lisp - -OptionStart=";;; Mew configuration options" -OptionEnd=";;; End of Mew configuration options" - -if [ "X$2" = X"POST-INSTALL" ]; then - a=`grep Mew ${infodir}/dir` - if [ "${a}" ]; then - grep -v "^\* Mew:" ${infodir}/dir > ${infodir}/dir.bak - mv ${infodir}/dir.bak ${infodir}/dir - fi - echo "Adding \"Mew\" to ${infodir}/dir" - echo '* Mew: (mew.info). Message interface to Emacs Window.' \ - >> ${infodir}/dir - a=`grep "^${OptionStart}" ${elispdir}/site-start.el` - if [ "${a}" ]; then - sed -e "/^${OptionStart}/,/^${OptionEnd}/d" \ - ${elispdir}/site-start.el > ${elispdir}/site-start.el.bak - mv ${elispdir}/site-start.el.bak ${elispdir}/site-start.el - fi - echo "Adding \"Mew\" entry to ${elispdir}/site-start.el" - echo "${OptionStart}" >> ${elispdir}/site-start.el - echo "(setq load-path (cons \"${elispdir}/mew\" load-path))" \ - >> ${elispdir}/site-start.el - echo "(setq mew-init-hook" >> ${elispdir}/site-start.el - echo " (function" >> ${elispdir}/site-start.el - echo " (lambda ()" >> ${elispdir}/site-start.el - echo " (setq kill-emacs-hook" >> ${elispdir}/site-start.el - echo " (function mew-mark-process-all-folders)))))" \ - >> ${elispdir}/site-start.el - echo "(autoload 'mew \"mew\" nil t)" \ - >> ${elispdir}/site-start.el - echo "(autoload 'mew-send \"mew\" nil t)" \ - >> ${elispdir}/site-start.el - echo "${OptionEnd}" \ - >> ${elispdir}/site-start.el - exit 0 -else - exit 0 -fi diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/japanese/mew/pkg/PLIST ./pkg/PLIST --- ../../current/ports/japanese/mew/pkg/PLIST Sat Jan 4 01:35:45 1997 +++ ./pkg/PLIST Mon May 5 17:02:25 1997 @@ -1,16 +1,25 @@ bin/MH-postproc bin/mew-refile bin/mewencode -@exec ln %B/mewencode %B/mewdecode; ln %B/mewencode %B/mewcat -@unexec rm -f %B/mewdecode; rm -f %B/mewcat +bin/mewdecode +bin/mewcat bin/uumerge bin/vscan info/mew.info info/mew.info-1 info/mew.info-2 -info/mew.info-3 +info/mew.jis.info +info/mew.jis.info-1 +info/mew.jis.info-2 +info/mew.jis.info-3 +lib/mule/site-lisp/mew/mew-mule2.el +lib/mule/site-lisp/mew/mew-cache.elc +lib/mule/site-lisp/mew/mew-env.elc +lib/mule/site-lisp/mew/mew-func.elc +lib/mule/site-lisp/mew/mew-mark.elc +lib/mule/site-lisp/mew/mew-mime.elc +lib/mule/site-lisp/mew/mew-minibuf.elc lib/mule/site-lisp/mew/mew-attach.elc -lib/mule/site-lisp/mew/mew-charset.elc lib/mule/site-lisp/mew/mew-decode.elc lib/mule/site-lisp/mew/mew-demo.elc lib/mule/site-lisp/mew/mew-draft.elc @@ -27,11 +36,13 @@ lib/mule/site-lisp/mew/mew-syntax.elc lib/mule/site-lisp/mew/mew-virtual.elc lib/mule/site-lisp/mew/mew.elc -share/doc/mew/mew.texi -share/examples/mew/dot.emacs -share/examples/mew/dot.mh_profile -share/examples/mew/aliases -share/examples/mew/scan.form -share/examples/mew/user-install - - +share/doc/mew-jp/mew.texi +share/doc/mew-jp/mew.jis.texi +share/examples/mew-jp/dot.emacs +share/examples/mew-jp/dot.mh_profile +share/examples/mew-jp/aliases +share/examples/mew-jp/scan.form +share/examples/mew-jp/user-install +@dirrm lib/mule/site-lisp/mew +@dirrm share/doc/mew-jp +@dirrm share/examples/mew-jp >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 04:10:24 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08297 for ports-outgoing; Thu, 5 Jun 1997 04:10:24 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA08277; Thu, 5 Jun 1997 04:10:17 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 04:10:17 -0700 (PDT) Resent-Message-Id: <199706051110.EAA08277@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, kiri@kiri.toba-cmt.ac.jp Received: from kiri.toba-cmt.ac.jp (kiri.toba-cmt.ac.jp [202.26.248.91]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id DAA07795 for ; Thu, 5 Jun 1997 03:59:56 -0700 (PDT) Received: (from kiri@localhost) by kiri.toba-cmt.ac.jp (8.8.5/8.8.5) id UAA17870; Thu, 5 Jun 1997 20:03:00 +0900 (JST) Message-Id: <199706051103.UAA17870@kiri.toba-cmt.ac.jp> Date: Thu, 5 Jun 1997 20:03:00 +0900 (JST) From: Kazuhiko Kiriyama(System administrator) Reply-To: kiri@kiri.toba-cmt.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3795: Update port camltk41-1.0 (x11/camltk41). Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3795 >Category: ports >Synopsis: Update port camltk41-1.0 (x11/camltk41). >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-ports >State: open >Class: support >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 04:10:15 PDT 1997 >Last-Modified: >Originator: Kazuhiko Kiriyama >Organization: Toba National College of Maritime Technology. Department of Electronic Mechanical Engineering >Release: FreeBSD 2.2.2-RELEASE i386 >Environment: >Description: I've updated the port camltk41-1.0 (x11/camltk41). Current modifications is (1) Corresponded to Tcl7.6/Tk4.2. Add, Delete and Update files are respecively [Add] : files/patch-site.config.tmpl [Delete] : patches/patch-ab [Update] : Makefile patches/patch-aa pkg/COMMENT pkg/DESCR pkg/PLIST I put the diff from ports-current(x11/camltk41) in "Fix:". >How-To-Repeat: >Fix: diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/x11/camltk41/Makefile ./Makefile --- ../../current/ports/x11/camltk41/Makefile Sun Apr 27 21:19:17 1997 +++ ./Makefile Sun Jun 1 16:06:29 1997 @@ -7,24 +7,31 @@ # DISTNAME= camltk41 -PKGNAME= camltk41-1.0 -CATEGORIES= x11 tk41 +PKGNAME?= camltk41-1.0 +CATEGORIES?= x11 MASTER_SITES= ftp://ftp.inria.fr/INRIA/Projects/cristal/Francois.Rouaix/mmm/ \ ftp://ftp.kurims.kyoto-u.ac.jp/pub/lang/mmm/ DISTFILES= ocamltk41.tar.gz MAINTAINER= kiri@kiri.toba-cmt.ac.jp -LIB_DEPENDS= tk41\\.:${PORTSDIR}/x11/tk41 +LIB_DEPENDS?= tcl76${LIBEXT}\\.:${PORTSDIR}/lang/tcl76 \ + tk42${LIBEXT}\\.:${PORTSDIR}/x11/tk42 BUILD_DEPENDS= ocaml:${PORTSDIR}/lang/ocaml GNU_CONFIGURE= yes -CONFIGURE_ARGS= --prefix=${PREFIX} \ +CONFIGURE_ARGS= --prefix=${PREFIX} --tcl-version=7.6${LIBEXT} \ + --tk-version=4.2${LIBEXT} \ --x-includes=${X11BASE}/include \ --with-config=site.config USE_GMAKE= yes DOCDIR= ${PREFIX}/share/doc/camltk +LIBEXT?= + +pre-patch: + @${SED} -e "s,%LIBEXT%,${LIBEXT},g" \ + < ${FILESDIR}/patch-site.config.tmpl > ${PATCHDIR}/patch-ab post-install: .if !defined(NOPORTDOCS) @@ -32,5 +39,8 @@ @${INSTALL_DATA} ${WRKSRC}/INSTALL ${DOCDIR} @${INSTALL_DATA} ${WRKSRC}/README ${DOCDIR} .endif + +pre-clean: + @${RM} -f ${PATCHDIR}/patch-ab .include diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/x11/camltk41/files/patch-site.config.tmpl ./files/patch-site.config.tmpl --- ../../current/ports/x11/camltk41/files/patch-site.config.tmpl Thu Jan 1 09:00:00 1970 +++ ./files/patch-site.config.tmpl Sun Jun 1 10:18:10 1997 @@ -0,0 +1,34 @@ +--- site.config Sun Dec 1 20:31:42 1996 ++++ site.config Wed Dec 18 19:00:36 1996 +@@ -1,24 +1,24 @@ + ## Location of Objective Caml Libraries +-OCAMLLIBDIR=/usr/local/lib/objective-caml +-# OCAMLLIBDIR=/usr/local/lib/ocaml ++# OCAMLLIBDIR=/usr/local/lib/objective-caml ++OCAMLLIBDIR=${prefix}/lib/ocaml + + ## Location of Tk sources + # In this directory, there are generic, unix, etc... +-TK_SRC=/usr/local/src/tk41 ++TK_SRC=${prefix}/include/tk${tk_version} + + ## Compilation and link flags for Tcl/Tk applications + ## Preprocessor flags to find tcl.h and tk.h +-#CPPFLAGS=-I/home/cahors/furuse/sun/include ++CPPFLAGS="-I${prefix}/include/tk${tk_version} -I${prefix}/include/tcl${tcl_version} -I${x_includes}" + ## ld flags to add path to libtcl*.* and libtk*.* +-#LDFLAGS=-L/home/cahors/furuse/sun/lib ++LDFLAGS=-L${prefix}/lib + + ## If you're building the japanised version of MMM, you must use the + ## japanised versions of Tcl and Tk. The libraries are usually installed + ## as libtclXXjp.a and libtkXXjp.a. Uncomment the following line if you + ## want "configure" to find the correct libraries +-# LIBEXT=jp ++LIBEXT=%LIBEXT% + + ## Installation directory + ## The default is $(OCAMLLIBDIR)/camltk41 + ## This MUST be an absolute path +-# INSTALLDIR=$HOME/ocamltk41/`arch` ++INSTALLDIR=${prefix}/lib/ocaml/camltk41 diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/x11/camltk41/patches/patch-aa ./patches/patch-aa --- ../../current/ports/x11/camltk41/patches/patch-aa Mon Jan 27 22:57:37 1997 +++ ./patches/patch-aa Sun Jun 1 10:11:11 1997 @@ -1,33 +1,36 @@ ---- site.config Sun Dec 1 20:31:42 1996 -+++ site.config Wed Dec 18 19:00:36 1996 -@@ -1,24 +1,24 @@ - ## Location of Objective Caml Libraries --OCAMLLIBDIR=/usr/local/lib/objective-caml --# OCAMLLIBDIR=/usr/local/lib/ocaml -+# OCAMLLIBDIR=/usr/local/lib/objective-caml -+OCAMLLIBDIR=${prefix}/lib/ocaml +--- configure.orig Mon Dec 2 22:14:09 1996 ++++ configure Wed Feb 19 14:44:02 1997 +@@ -22,6 +22,8 @@ + build=NONE + cache_file=./config.cache + exec_prefix=NONE ++tcl_version= ++tk_version= + host=NONE + no_create= + nonopt=NONE +@@ -376,6 +378,24 @@ + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; ++ ++ -tcl-version | --tcl-version | --tcl-versio | --tcl-versi \ ++ | --tcl-vers | --tcl-ver \ ++ | --tcl-ve | --tcl-v) ++ ac_prev=tcl-version ;; ++ -tcl-version=* | --tcl-version=* | --tcl-versio=* | --tcl-versi=* \ ++ | --tcl-vers=* | --tcl-ver=* \ ++ | --tcl-ve=* | --tcl-v=*) ++ tcl_version="$ac_optarg" ;; ++ ++ -tk-version | --tk-version | --tk-versio | --tk-versi \ ++ | --tk-vers | --tk-ver \ ++ | --tk-ve | --tk-v) ++ ac_prev=tk-version ;; ++ -tk-version=* | --tk-version=* | --tk-versio=* | --tk-versi=* \ ++ | --tk-vers=* | --tk-ver=* \ ++ | --tk-ve=* | --tk-v=*) ++ tk_version="$ac_optarg" ;; - ## Location of Tk sources - # In this directory, there are generic, unix, etc... --TK_SRC=/usr/local/src/tk41 -+TK_SRC=${prefix}/include/tk4.1 - - ## Compilation and link flags for Tcl/Tk applications - ## Preprocessor flags to find tcl.h and tk.h --#CPPFLAGS=-I/home/cahors/furuse/sun/include -+CPPFLAGS="-I${prefix}/include -I${x_includes}" - ## ld flags to add path to libtcl*.* and libtk*.* --#LDFLAGS=-L/home/cahors/furuse/sun/lib -+LDFLAGS=-L${prefix}/lib - - ## If you're building the japanised version of MMM, you must use the - ## japanised versions of Tcl and Tk. The libraries are usually installed - ## as libtclXXjp.a and libtkXXjp.a. Uncomment the following line if you - ## want "configure" to find the correct libraries - # LIBEXT=jp - - ## Installation directory - ## The default is $(OCAMLLIBDIR)/camltk41 - ## This MUST be an absolute path --# INSTALLDIR=$HOME/ocamltk41/`arch` -+INSTALLDIR=${prefix}/lib/ocaml/camltk41 + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/x11/camltk41/patches/patch-ab ./patches/patch-ab --- ../../current/ports/x11/camltk41/patches/patch-ab Mon Jan 6 23:13:27 1997 +++ ./patches/patch-ab Thu Jan 1 09:00:00 1970 @@ -1,26 +0,0 @@ ---- configure Mon Dec 2 22:14:09 1996 -+++ configure Sun Jan 5 09:04:29 1997 -@@ -22,6 +22,7 @@ - build=NONE - cache_file=./config.cache - exec_prefix=NONE -+tk_src_prefix= - host=NONE - no_create= - nonopt=NONE -@@ -376,6 +377,15 @@ - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; -+ -+ -tk-src-prefix | --tk-src-prefix | --tk-src-prefi | --tk-src-pref \ -+ | --tk-src-pre | --tk-src-pr | --tk-src-p | --tk-src- | --tk-src \ -+ | --tk-sr | --tk-s) -+ ac_prev=tk-src-prefix ;; -+ -tk-src-prefix=* | --tk-src-prefix=* | --tk-src-prefi=* | --tk-src-pref=* \ -+ | --tk-src-pre=* | --tk-src-pr=* | --tk-src-p=* | --tk-src-=* | --tk-src=* \ -+ | --tk-sr=* | --tk-s=*) -+ tk_src_prefix="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/x11/camltk41/pkg/COMMENT ./pkg/COMMENT --- ../../current/ports/x11/camltk41/pkg/COMMENT Fri Jan 3 21:12:47 1997 +++ ./pkg/COMMENT Sun Jun 1 10:51:44 1997 @@ -1 +1 @@ -A library for interfacing Objective Caml with Tcl7.5/Tk4.1. +A library for interfacing Objective Caml with Tcl/Tk diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/x11/camltk41/pkg/DESCR ./pkg/DESCR --- ../../current/ports/x11/camltk41/pkg/DESCR Fri Jan 3 21:12:47 1997 +++ ./pkg/DESCR Sun Jun 1 10:51:59 1997 @@ -1,5 +1,5 @@ CamlTk41 is a library for interfacing Objective Caml with the scripting -language Tcl/Tk (versions 7.5/4.1 or 7.6/4.2 only). +language Tcl/Tk. In addition to the basic interface with Tcl/Tk, this package contains * the "frx" library, written by Francois Rouaix; it contains some diff -urN --exclude=CVS --exclude=*.orig ../../current/ports/x11/camltk41/pkg/PLIST ./pkg/PLIST --- ../../current/ports/x11/camltk41/pkg/PLIST Fri Jan 3 21:12:47 1997 +++ ./pkg/PLIST Sun Jun 1 10:50:39 1997 @@ -147,3 +147,5 @@ lib/ocaml/camltk41/wm.mli share/doc/camltk/INSTALL share/doc/camltk/README +@dirrm lib/ocaml/camltk41 +@dirrm share/doc/camltk >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 05:50:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA11457 for ports-outgoing; Thu, 5 Jun 1997 05:50:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA11451; Thu, 5 Jun 1997 05:50:02 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 05:50:02 -0700 (PDT) Resent-Message-Id: <199706051250.FAA11451@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, joe@pavilion.net Received: from florence.pavilion.net (mailrelay1.pavilion.net [194.242.128.25]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA11240 for ; Thu, 5 Jun 1997 05:42:17 -0700 (PDT) Received: from core.pavilion.net (core.pavilion.net [194.242.128.24]) by florence.pavilion.net (8.8.5/8.8.5) with ESMTP id NAA25790 for ; Thu, 5 Jun 1997 13:41:44 +0100 (BST) Received: (from joe@localhost) by core.pavilion.net (8.8.5/8.8.5) id NAA15389; Thu, 5 Jun 1997 13:41:44 +0100 (BST) Message-Id: <199706051241.NAA15389@core.pavilion.net> Date: Thu, 5 Jun 1997 13:41:44 +0100 (BST) From: Josef Karthauser Reply-To: joe@pavilion.net To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3796: A port of the RIPE version of whois for querying their database Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3796 >Category: ports >Synopsis: A port of the RIPE version of whois for querying their database >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 05:50:01 PDT 1997 >Last-Modified: >Originator: Josef Karthauser >Organization: Pavilion Internet plc >Release: FreeBSD 2.2-STABLE i386 >Environment: >Description: >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 05:55:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA11566 for ports-outgoing; Thu, 5 Jun 1997 05:55:30 -0700 (PDT) Received: from fgate.flevel.co.uk (root@fgate.flevel.co.uk [194.6.101.2]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA11556; Thu, 5 Jun 1997 05:55:18 -0700 (PDT) Received: from localhost (trefor@localhost) by fgate.flevel.co.uk (8.8.3/8.6.9) with SMTP id NAA21706; Thu, 5 Jun 1997 13:55:42 +0100 (BST) Date: Thu, 5 Jun 1997 13:55:42 +0100 (BST) From: "Trefor S." To: Satoshi Asami cc: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3702 In-Reply-To: <199706040709.AAA00538@freefall.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, 4 Jun 1997, Satoshi Asami wrote: > Synopsis: Port of FXHTML for FreeBSD > > State-Changed-From-To: open-closed > State-Changed-By: asami > State-Changed-When: Wed Jun 4 00:08:09 PDT 1997 > State-Changed-Why: > > Thanks, committed. By the way, please mention the filename > (full URL preferred) in the PR. Also, it will make our lives > easier if you tar the stuff up from the parent directory instead > of within the fxhtml subdirectory. Thanks very much -- sorry to put you to trouble, Ive not done an Freebsd "port" before now. Cheers. Trefor S. > Here are my changes: > > === > diff -ru fxhtml/Makefile fxhtml.new/Makefile > --- fxhtml/Makefile Wed May 28 06:44:30 1997 > +++ fxhtml.new/Makefile Tue Jun 3 23:55:12 1997 > @@ -1,19 +1,16 @@ > # New ports collection makefile for: fxhtml > -# Version required: 1.14.5 > -# Date created: 21 August 1994 > -# Whom: jkh > +# Version required: 1.6.7 > +# Date created: 21 August 1994 > +# Whom: Trefor S. > # > -# Makefile,v 1.13 1995/10/04 14:45:01 asami Exp > +# $Id$ > # > > DISTNAME= fxhtml-freebsd-1.6.7 > +PKGNAME= fxhtml-1.6.7 > CATEGORIES= www > MASTER_SITES= ftp://ftp.flevel.co.uk/pub/fxhtml/ > -CGI_BIN= /usr/local/www/cgi-bin/ > -DOC_ROOT= /usr/local/www/data/ > > MAINTAINER= fxhtml@flevel.co.uk > - > -post-install: > > .include > === > > Seems like you forgot to erase a bunch of stuff you didn't need after > all. :) > From owner-freebsd-ports Thu Jun 5 09:33:15 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA22860 for ports-outgoing; Thu, 5 Jun 1997 09:33:15 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA22850; Thu, 5 Jun 1997 09:33:10 -0700 (PDT) From: "David E. O'Brien" Received: (from obrien@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id JAA12345; Thu, 5 Jun 1997 09:32:58 -0700 (PDT) Date: Thu, 5 Jun 1997 09:32:58 -0700 (PDT) Message-Id: <199706051632.JAA12345@freefall.freebsd.org> To: joe@pavilion.net, obrien@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3796 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: A port of the RIPE version of whois for querying their database State-Changed-From-To: open-closed State-Changed-By: obrien State-Changed-When: Thu Jun 5 09:32:11 PDT 1997 State-Changed-Why: Bodyless PR. From owner-freebsd-ports Thu Jun 5 09:47:26 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA23676 for ports-outgoing; Thu, 5 Jun 1997 09:47:26 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA23670; Thu, 5 Jun 1997 09:47:20 -0700 (PDT) From: "David E. O'Brien" Received: (from obrien@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id JAA12457; Thu, 5 Jun 1997 09:47:08 -0700 (PDT) Date: Thu, 5 Jun 1997 09:47:08 -0700 (PDT) Message-Id: <199706051647.JAA12457@freefall.freebsd.org> To: obrien@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, obrien@FreeBSD.ORG Subject: Re: ports/3783 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: New port: skill/snice Responsible-Changed-From-To: freebsd-ports->obrien Responsible-Changed-By: obrien Responsible-Changed-When: Thu Jun 5 09:45:44 PDT 1997 Responsible-Changed-Why: I'd like to see what the ports about. so I'll atek it.:x Ok, so I'm not in vi. (tg, I seem to by copying you :-)) . From owner-freebsd-ports Thu Jun 5 09:50:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA23832 for ports-outgoing; Thu, 5 Jun 1997 09:50:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA23825; Thu, 5 Jun 1997 09:50:02 -0700 (PDT) Resent-Date: Thu, 5 Jun 1997 09:50:02 -0700 (PDT) Resent-Message-Id: <199706051650.JAA23825@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, andy@icc.surw.chel.su Received: from rich.chel.su (root@mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA23575 for ; Thu, 5 Jun 1997 09:45:18 -0700 (PDT) Received: from icc.surw.chel.su (surw.chel.su [195.54.2.162]) by rich.chel.su (8.7.2/Murphy) with ESMTP id WAA19159 for ; Thu, 5 Jun 1997 22:50:03 +0600 (UDT) Received: (from andy@localhost) by icc.surw.chel.su (8.8.4/8.8.4) id UAA25500; Thu, 5 Jun 1997 20:23:41 GMT Message-Id: <199706052023.UAA25500@icc.surw.chel.su> Date: Thu, 5 Jun 1997 20:23:41 GMT From: Andrey Zakhvatov Reply-To: andy@icc.surw.chel.su To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3797: New port: starlanes-1.2.2 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3797 >Category: ports >Synopsis: New port: starlanes-1.2.2 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Thu Jun 5 09:50:01 PDT 1997 >Last-Modified: >Originator: Andrey Zakhvatov >Organization: >Release: FreeBSD 2.1-STABLE i386 >Environment: >Description: This is a port of the classic space-age stock trading game. Look at ftp://ftp.freebsd.org/pub/FreeBSD/incoming/starlanes-1.2.2.tar.gz >How-To-Repeat: >Fix: Please, check and commit. >Audit-Trail: >Unformatted: From owner-freebsd-ports Thu Jun 5 10:11:24 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA25007 for ports-outgoing; Thu, 5 Jun 1997 10:11:24 -0700 (PDT) Received: from relay.nuxi.com (nuxi.ucdavis.edu [128.120.175.23]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA25001; Thu, 5 Jun 1997 10:11:21 -0700 (PDT) Received: from dragon.nuxi.com (reqf-067.ucdavis.edu [128.120.253.187]) by relay.nuxi.com (8.8.5/8.6.12) with ESMTP id KAA14849; Thu, 5 Jun 1997 10:14:27 -0700 (PDT) Received: (from obrien@localhost) by dragon.nuxi.com (8.8.5/8.7.3) id RAA09789; Thu, 5 Jun 1997 17:10:55 GMT Message-ID: <19970605101054.03357@nuxi.com> Date: Thu, 5 Jun 1997 10:10:54 -0700 From: "David O'Brien" To: Satoshi Asami Cc: junker@jazz.snu.ac.kr, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3336 References: <199706040814.BAA01869@freefall.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.75 In-Reply-To: <199706040814.BAA01869@freefall.freebsd.org>; from Satoshi Asami on Wed, Jun 04, 1997 at 01:14:45AM -0700 X-Warning: Mutt Bites! X-Operating-System: FreeBSD 2.2-STABLE Organization: The NUXI *BSD group X-PGP-Fingerprint: B7 4D 3E E9 11 39 5F A3 90 76 5D 69 58 D9 98 7A X-Pgp-Keyid: 34F9F9D5 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Wed, Jun 04, 1997 at 01:14:45AM -0700, Satoshi Asami wrote: > Synopsis: new port request of korean/hanmutt > > The version looks fairly old (0.60 vs. 0.75 in the mainline mutt), do > you have any newer version? I don't believe the korean version has been. I guess there are substantal hacks to make it work ??? -- -- David (obrien@NUXI.com -or- obrien@FreeBSD.org) From owner-freebsd-ports Thu Jun 5 12:00:44 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA00554 for ports-outgoing; Thu, 5 Jun 1997 12:00:44 -0700 (PDT) Received: from smtp1.ts.kiev.ua (viking.ts.kiev.ua [193.124.229.195]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA00544; Thu, 5 Jun 1997 12:00:34 -0700 (PDT) Received: from aviion.ts.kiev.ua by smtp1.ts.kiev.ua with SMTP id VAA28243; (8.8.3/zah/2.1) Thu, 5 Jun 1997 21:09:18 +0300 (EET DST) Received: from nbki.ipri.kiev.ua by aviion.ts.kiev.ua with ESMTP id SAA28918; (8.6.11/zah/2.1) Thu, 5 Jun 1997 18:27:59 GMT Received: from cki.ipri.kiev.ua by nbki.ipri.kiev.ua with ESMTP id UAA12624; (8.6.9/zah/1.1) Thu, 5 Jun 1997 20:18:24 +0100 Received: from 194.44.146.14 ([194.44.146.14]) by cki.ipri.kiev.ua (8.7.6/8.7.3) with SMTP id UAA00232; Thu, 5 Jun 1997 20:11:52 +0300 (EET DST) Message-ID: <3396E575.217C@cki.ipri.kiev.ua> Date: Thu, 05 Jun 1997 19:12:33 +0300 From: Ruslan Shevchenko Reply-To: rssh@cki.ipri.kiev.ua Organization: IPRI X-Mailer: Mozilla 3.01Gold (Macintosh; I; 68K) MIME-Version: 1.0 To: Satoshi Asami CC: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3757 References: <199706032351.QAA03678@freefall.freebsd.org> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Satoshi Asami wrote: > > Synopsis: port of simpack (I forgott to write the name of file in prev.) > > State-Changed-From-To: open-analyzed > State-Changed-By: asami > State-Changed-When: Tue Jun 3 16:50:15 PDT 1997 > State-Changed-Why: > > Thanks, but the Makefile is too big. Can you perhaps break > some sections into file/Makefile and just copy that to ${WRKSRC}? > > Also, please read the handbook's porting section and arrange > the port's Makefile according to it. I put it as ftp://ftp.freebsd.org/pub/FreeBSD/incoming/simpack1.tar.gz (simpack1, becouse old simpack is here. I propose to delete it. New put, becouse many is changed, new files is added --- so, new put in this case better then diff. (Without tar feauture, becouse I need only in directory structure, not in files) End espessially few words about this port and tk: 1 application (sdsmt require tk, but only one, so, I think, that simpack is not depend from tk.) correct me, if I wrong. And about general port structure: may be we must have LINKS future: i.e. allow ports to be not well-ordered by depends (in algebraick sense), and run from crom stuff, which see: if new ports adeed ? --- may be linked from existings ports and so on. Examples, way we need in this: 1. TeX styles, (we must link it in texfmt directory, and, in case teTeX rerun texhush) 2. .el files (when adding emacs/xemacs) May be we must create some stuff, as windows registry, which holds the name of actions and variable. (And allow read envirowment variables to shell during boot) P.S. I cc:-ed his to freebsd-ports, to stimulate discussion about this. From owner-freebsd-ports Thu Jun 5 13:56:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id NAA06663 for ports-outgoing; Thu, 5 Jun 1997 13:56:31 -0700 (PDT) Received: from ingenieria ([168.176.15.11]) by hub.freebsd.org (8.8.5/8.8.5) with SMTP id NAA06632; Thu, 5 Jun 1997 13:56:04 -0700 (PDT) Received: by ingenieria (SMI-8.6/SMI-SVR4) id QAA01783; Thu, 5 Jun 1997 16:42:33 -0400 Date: Thu, 5 Jun 1997 16:42:33 -0400 (EDT) From: Pedro Giffuni To: Satoshi Asami cc: asami@FreeBSD.org, freebsd-ports@FreeBSD.org Subject: Re: ports/2379 In-Reply-To: <199706032343.QAA03360@freefall.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk Satoshi; Honestly, I didn't port this, I lost my port and it was also a mess, so I didn't take the time to fix it after I saw this one. Yes, NetPBM is a dependency, and there is also support for many other graphic devices (including NCSA telnet and TIFF) that work, but had to be activated in the configuration file. I remember this is a very useful port, but the original porter made some desesperate scripts I didn't like. I'll take a look later and see what can be done. Pedro. On Tue, 3 Jun 1997, Satoshi Asami wrote: > Synopsis: New URT port > > State-Changed-From-To: open-closed > State-Changed-By: asami > State-Changed-When: Tue Jun 3 16:43:08 PDT 1997 > State-Changed-Why: > > Thanks, committed. I made so many changes so I'm not going > to include the diff here. > > By the way, should I add netpbm to RUN_DEPENDS too? > From owner-freebsd-ports Thu Jun 5 16:36:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA13909 for ports-outgoing; Thu, 5 Jun 1997 16:36:06 -0700 (PDT) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA13901; Thu, 5 Jun 1997 16:36:02 -0700 (PDT) Received: (from asami@localhost) by vader.cs.berkeley.edu (8.8.5/8.7.3) id QAA04204; Thu, 5 Jun 1997 16:35:43 -0700 (PDT) Date: Thu, 5 Jun 1997 16:35:43 -0700 (PDT) Message-Id: <199706052335.QAA04204@vader.cs.berkeley.edu> To: obrien@NUXI.com CC: junker@jazz.snu.ac.kr, freebsd-ports@FreeBSD.ORG In-reply-to: <19970605101054.03357@nuxi.com> (obrien@NUXI.com) Subject: Re: ports/3336 From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk * I don't believe the korean version has been. I guess there are * substantal hacks to make it work ??? That's what the submitter told me too. Anyway, do you want to import this port? I got the tarball on wcarchive already (took me one hour to transfer it from Korea yesterday...). Satoshi From owner-freebsd-ports Thu Jun 5 16:47:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id QAA14278 for ports-outgoing; Thu, 5 Jun 1997 16:47:06 -0700 (PDT) Received: from mail.webspan.net (root@mail.webspan.net [206.154.70.7]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id QAA14269; Thu, 5 Jun 1997 16:46:58 -0700 (PDT) Received: from orion.webspan.net (orion.webspan.net [206.154.70.5]) by mail.webspan.net (8.8.5/8.8.5) with ESMTP id TAA06115; Thu, 5 Jun 1997 19:46:51 -0400 (EDT) Received: from orion.webspan.net (localhost [127.0.0.1]) by orion.webspan.net (WEBSPN/970116) with ESMTP id TAA00538; Thu, 5 Jun 1997 19:46:50 -0400 (EDT) To: John Polstra cc: "Julian H. Stacey" , ports@freebsd.org, committers@freebsd.org From: "Gary Palmer" Subject: Re: ports/comms/hylafax In-reply-to: Your message of "Thu, 05 Jun 1997 09:06:47 PDT." <199706051606.JAA06183@austin.polstra.com> Date: Thu, 05 Jun 1997 19:46:50 -0400 Message-ID: <533.865554410@orion.webspan.net> Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk [ CC: snipped ] John Polstra wrote in message ID <199706051606.JAA06183@austin.polstra.com>: > I'm with Satoshi on this whole thing. I agree. Not only does Satoshi do a sterling job of maintaining an every growing headache that is called `the ports collection', he does so in his spare time. Unless Julian is willing to dedicate that ammount of time to maintaining the ports, I suggest he stops complaining about decisions made. > Also, while the port was not marked broken, it was indeed broken -- > the distfile doesn't exist on the master site. Not to put too fine > a point on it, but to me that weakens your claim of authority over > the port as its maintainer. Infact, given that Julian had been asked to upgrade the port at least once, and that the PR for the new port sat for so long in GNATS before Satoshi did anything, I'm not at all sure what all the fuss is about. If Julian spent half the time that he has now expended writing mails attacking Satoshi on his port, this would never have happened. Instead he chose to decline Satoshi's upgrade requests, and now when someone else presented us with a solution, he chooses to attack instead. Not the most productive use of his time, IMHO. > Finally, no matter what Satoshi does, he doesn't have any way I know > of to delete the old port from your 2.2.1 CD. Or the in-the-works 2.2.2 CD either, since at least one copy has gone off to replication already. Gary -- Gary Palmer Speaking for no-one other than himself FreeBSD: Turning PC's into workstations. See http://www.FreeBSD.ORG/ for info From owner-freebsd-ports Thu Jun 5 18:26:27 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id SAA18472 for ports-outgoing; Thu, 5 Jun 1997 18:26:27 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (wck-ca7-22.ix.netcom.com [204.31.231.54]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id SAA18414; Thu, 5 Jun 1997 18:25:53 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id SAA29193; Thu, 5 Jun 1997 18:25:37 -0700 (PDT) Date: Thu, 5 Jun 1997 18:25:37 -0700 (PDT) Message-Id: <199706060125.SAA29193@silvia.HIP.Berkeley.EDU> To: jim@reptiles.org CC: itojun@itojun.org, jhs@freebsd.org, committers@freebsd.org, hylafax@freebsd.org, gj@freebsd.org, ports@freebsd.org In-reply-to: (jim@reptiles.org) Subject: Re: ports/comms/hylafax From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Thanks for your comments. * however, from a general user's perspective, it would be far greater for newish * versions of things to be added with a version number (ie. hylafax4, ncftp2, * perl5, etc) such that we, the normal users, have a choice of running the * old standby (even if it has bugs) or the newfangled port (even if it has bugs). I'm sorry, but those are more of special cases and not the rule. ncftp2 and perl5 are both newer versions of what is/has been in the main source tree. (There never would have been both ncftp1 and ncftp2 in the ports tree if ncftp1 wasn't in the main source tree before.) Things like tiff/tcl/tk have multiple versions because they are used by other ports and are/were necessary to ensure the integrity of the ports tree. Ghostscript[234] are there because the newer versions have licenses too limited for free corporate use. The others are stuff like gimp-devel, nn-current and vim5beta, which have not replaced the old version because the new ones are still in beta. When the new version comes out of beta, we intend to merge them into the old port. In general, we do not maintain multiple versions of the same port because it is too much work to do so. Note that for every port that's in the tree, even if it's an older version that nobody commits against anymore, we have to check tarballs, build packages and field bug reports. Having multiple versions of the same port also causes a whole lot of interesting problems (see the gs[234] binary mixup in 2.2-BETA packages for example) that we rather not have to worry about. Now for hylafax. It falls into none of the above special cases. It is an "oddball" port that requires me to take special action while building packages (it uses bash as shell, and chokes on my cd/rm exported functions so I need to stop and unset those), so having one more hylafax port means a lot more work for me whenever I build the packages (which happen about once a month -- it is now necessary with -current moving so fast and many things breaking left and right). Also, the new version (4.0 release, not beta) has come out in August of 1996. That is 10 months ago. The upgrade has been long overdue, I have asked several people who mentioned that they "got 4.0 working at home" to make a port, until finally itojun (three cheers to him!) came up with one. Since this particular port was first mentioned in a Japanese mailing list, we had some people test it there, and I committed the port after about a few weeks of "ok" reports and no "doesn't work" reports. Besides, the author has deleted the ver 3 tarball from his own site. I would trust his judgement more than anyone else's. * put plainly, i'm sure many of us appreciate the efforts put into maintaining * the ports collection, but let's not get into pissing contests over who has * control. then we all suffer. Amen. The "correct" procedure to deal with this was probably for me to strip the MAINTAINER=jhs line for neglecting to upgrade the port for so long, and then commit the new port, but what difference does that make? I didn't want to publically embarrass/accuse Mr. Stacey by making it an issue, and indeed thought I was doing him a favor by giving him a chance to silently watch from the sidelines while people do the work that he was expected to (and if you take a diff of the committed pkg/PLIST with the submitted version, you can see that *I* also did a lot of work to make it package correctly, one thing the old port never did). I guess that didn't work very well. Satoshi From owner-freebsd-ports Thu Jun 5 19:16:55 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA21089 for ports-outgoing; Thu, 5 Jun 1997 19:16:55 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (wck-ca7-22.ix.netcom.com [204.31.231.54]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id TAA21084 for ; Thu, 5 Jun 1997 19:16:51 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id TAA29379; Thu, 5 Jun 1997 19:16:41 -0700 (PDT) Date: Thu, 5 Jun 1997 19:16:41 -0700 (PDT) Message-Id: <199706060216.TAA29379@silvia.HIP.Berkeley.EDU> To: m230761@ingenieria.ingsala.unal.edu.co CC: freebsd-ports@FreeBSD.org In-reply-to: (message from Pedro Giffuni on Thu, 5 Jun 1997 16:42:33 -0400 (EDT)) Subject: Re: ports/2379 From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk * Yes, NetPBM is a dependency, and there is also support for many other * graphic devices (including NCSA telnet and TIFF) that work, but had to be * activated in the configuration file. Sorry, my question was whether it is a compile-time dependency (which it surely is, I had to adjust the libp?m paths in some patches) only or is a runtime dependency also (i.e., does it call any of the programs?). The original port had it as LIB_DEPENDS, but since the netpbm port doesn't build shared libraries, it was impossible to tell which. * I remember this is a very useful port, but the original porter made some * desesperate scripts I didn't like. I'll take a look later and see what can * be done. I'm sure it is useful. When I looked at the PR, I thought "gosh, why hasn't URT been in our collection!". ;) Satoshi From owner-freebsd-ports Thu Jun 5 19:40:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA22091 for ports-outgoing; Thu, 5 Jun 1997 19:40:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id TAA22077; Thu, 5 Jun 1997 19:40:01 -0700 (PDT) Date: Thu, 5 Jun 1997 19:40:01 -0700 (PDT) Message-Id: <199706060240.TAA22077@hub.freebsd.org> To: freebsd-ports Cc: From: Yoshiaki Uchikawa Subject: Re: ports/3357: I make "pari-GP" ports Reply-To: Yoshiaki Uchikawa Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3357; it has been noted by GNATS. From: Yoshiaki Uchikawa To: asami@cs.berkeley.edu (Satoshi Asami) Cc: yoshiaki@kt.rim.or.jp, freebsd-gnats-submit@freebsd.org Subject: Re: ports/3357: I make "pari-GP" ports Date: Fri, 06 Jun 1997 11:37:28 +0900 >>>>> In <199706042325.QAA01494@vader.cs.berkeley.edu> >>>>> asami@cs.berkeley.edu (Satoshi Asami) wrote: > By the way, the reason why I asked is because NO_PACKAGE is no longer > a boolean. That is seem to be. > Why don't you put a notice (pkg/MESSAGE would be fine) that the > authors request that the distfiles always accompany the package? You > can also say "the distfile can be found at /cdrom/ports/distfiles or > ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/ somewhere very close to > this package". Yes. I'll put a notice MESSAGE and delete NO_PACKAGE. And, send-pr again. Is that all right ? --- yoshiaki@kt.rim.or.jp From owner-freebsd-ports Thu Jun 5 21:12:47 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA25171 for ports-outgoing; Thu, 5 Jun 1997 21:12:47 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (silvia.HIP.Berkeley.EDU [136.152.64.181]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA25165 for ; Thu, 5 Jun 1997 21:12:43 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id VAA16397; Thu, 5 Jun 1997 21:12:39 -0700 (PDT) Date: Thu, 5 Jun 1997 21:12:39 -0700 (PDT) Message-Id: <199706060412.VAA16397@silvia.HIP.Berkeley.EDU> To: ports@freebsd.org CC: rdm@cfcl.com Subject: first cut of multiple architecture support From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Here is a (very lightly tested) patch for multiple architecture/ operating system support in our ports tree. I'm not sure if subcasing FILESDIR and PKGDIR is really necessary, but I did it anyway. Basically, what this does is look at .[arch]-[opsys] type directories before the regular directories. For instance, if you are running FreeBSD on i386, patches will be checked in this order: patches.i386-FreeBSD patches.FreeBSD patches.i386 patches Note that the first one found takes precedence over all others, i.e., if "patches.FreeBSD" exists, nothing in "patches" will be used. It is much harder to implement incremental patching, and when it comes to scripts and pkg, it is not clear at all what is the right thing to do if more than one directory exists. By the way, do people think I should add support for "pre-install-i386" sort of targets? That would be require a little more hack but is doable. Satoshi ------- Index: bsd.port.mk =================================================================== RCS file: /usr/cvs/src/share/mk/bsd.port.mk,v retrieving revision 1.258 diff -u -r1.258 bsd.port.mk --- bsd.port.mk 1997/06/04 00:12:19 1.258 +++ bsd.port.mk 1997/06/06 04:00:29 @@ -29,6 +29,7 @@ # # Variables that typically apply to all ports: # +# ARCH - The architecture, as returned by "uname -m". # OPSYS - Portability clause. This is the operating system the # makefile is being used on. Automatically set to # "FreeBSD," "NetBSD," or "OpenBSD" as appropriate. @@ -256,6 +257,9 @@ # NEVER override the "regular" targets unless you want to open # a major can of worms. +# Get the architecture +ARCH!= uname -m + # Get the operating system type OPSYS!= uname -s @@ -263,6 +267,13 @@ .include "${.CURDIR}/../Makefile.inc" .endif +.if exists(${.CURDIR}/Makefile.${ARCH}-${OPSYS}) +.include "${.CURDIR}/Makefile.${ARCH}-${OPSYS}" +.elif exists(${.CURDIR}/Makefile.${OPSYS}) +.include "${.CURDIR}/Makefile.${OPSYS}" +.elif exists(${.CURDIR}/Makefile.${ARCH}) +.include "${.CURDIR}/Makefile.${ARCH}" +.endif # These need to be absolute since we don't know how deep in the ports # tree we are and thus can't go relative. They can, of course, be overridden @@ -288,10 +299,47 @@ .else WRKSRC?= ${WRKDIR}/${DISTNAME} .endif + +.if exists(${.CURDIR}/patches.${ARCH}-${OPSYS}) +PATCHDIR?= ${.CURDIR}/patches.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/patches.${OPSYS}) +PATCHDIR?= ${.CURDIR}/patches.${OPSYS} +.elif exists(${.CURDIR}/patches.${ARCH}) +PATCHDIR?= ${.CURDIR}/patches.${ARCH} +.else PATCHDIR?= ${.CURDIR}/patches +.endif + +.if exists(${.CURDIR}/scripts.${ARCH}-${OPSYS}) +SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/scripts.${OPSYS}) +SCRIPTDIR?= ${.CURDIR}/scripts.${OPSYS} +.elif exists(${.CURDIR}/scripts.${ARCH}) +SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH} +.else SCRIPTDIR?= ${.CURDIR}/scripts +.endif + +.if exists(${.CURDIR}/files.${ARCH}-${OPSYS}) +FILESDIR?= ${.CURDIR}/files.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/files.${OPSYS}) +FILESDIR?= ${.CURDIR}/files.${OPSYS} +.elif exists(${.CURDIR}/files.${ARCH}) +FILESDIR?= ${.CURDIR}/files.${ARCH} +.else FILESDIR?= ${.CURDIR}/files +.endif + +.if exists(${.CURDIR}/pkg.${ARCH}-${OPSYS}) +PKGDIR?= ${.CURDIR}/pkg.${ARCH}-${OPSYS} +.elif exists(${.CURDIR}/pkg.${OPSYS}) +PKGDIR?= ${.CURDIR}/pkg.${OPSYS} +.elif exists(${.CURDIR}/pkg.${ARCH}) +PKGDIR?= ${.CURDIR}/pkg.${ARCH} +.else PKGDIR?= ${.CURDIR}/pkg +.endif + .if defined(USE_IMAKE) || defined(USE_X11) PREFIX?= ${X11BASE} .else From owner-freebsd-ports Thu Jun 5 21:30:33 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA25914 for ports-outgoing; Thu, 5 Jun 1997 21:30:33 -0700 (PDT) Received: from nexis.net (customer-1.ican.net [198.133.36.101]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA25903 for ; Thu, 5 Jun 1997 21:30:30 -0700 (PDT) Received: from localhost (james@localhost) by nexis.net (8.8.5/8.8.5) with SMTP id AAA17601; Fri, 6 Jun 1997 00:29:51 -0400 (EDT) Date: Fri, 6 Jun 1997 00:29:51 -0400 (EDT) From: James FitzGibbon To: Satoshi Asami cc: ports@FreeBSD.ORG, rdm@cfcl.com Subject: Re: first cut of multiple architecture support In-Reply-To: <199706060412.VAA16397@silvia.HIP.Berkeley.EDU> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 5 Jun 1997, Satoshi Asami wrote: > By the way, do people think I should add support for > "pre-install-i386" sort of targets? That would be require a little > more hack but is doable. Personally, I think that the main targets should be smart enough to use defined variables rather than create an extra 10 or 12 targets per OS. -- j. From owner-freebsd-ports Thu Jun 5 21:31:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA25942 for ports-outgoing; Thu, 5 Jun 1997 21:31:14 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (silvia.HIP.Berkeley.EDU [136.152.64.181]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA25936 for ; Thu, 5 Jun 1997 21:31:11 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id TAA29551; Thu, 5 Jun 1997 19:46:27 -0700 (PDT) Date: Thu, 5 Jun 1997 19:46:27 -0700 (PDT) Message-Id: <199706060246.TAA29551@silvia.HIP.Berkeley.EDU> To: rssh@cki.ipri.kiev.ua CC: freebsd-ports@freebsd.org In-reply-to: <3396E575.217C@cki.ipri.kiev.ua> (message from Ruslan Shevchenko on Thu, 05 Jun 1997 19:12:33 +0300) Subject: Re: ports/3757 From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Now about the other half: * And about general port structure: * may be we must have LINKS future: i.e. allow ports to * be not well-ordered by depends (in algebraick sense), and run * from crom stuff, which see: if new ports adeed ? --- may be linked * from existings ports and so on. * * Examples, way we need in this: * * 1. TeX styles, (we must link it in texfmt directory, and, * in case teTeX rerun texhush) * 2. .el files (when adding emacs/xemacs) * * May be we must create some stuff, as windows registry, which * holds the name of actions and variable. * (And allow read envirowment variables to shell during boot) * * P.S. I cc:-ed his to freebsd-ports, to stimulate discussion about * this. Sorry, I have no idea what you are talking about here. ;) Satoshi From owner-freebsd-ports Thu Jun 5 21:36:33 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA26202 for ports-outgoing; Thu, 5 Jun 1997 21:36:33 -0700 (PDT) Received: from silvia.HIP.Berkeley.EDU (silvia.HIP.Berkeley.EDU [136.152.64.181]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id VAA26197 for ; Thu, 5 Jun 1997 21:36:30 -0700 (PDT) Received: (from asami@localhost) by silvia.HIP.Berkeley.EDU (8.8.5/8.6.9) id VAA16559; Thu, 5 Jun 1997 21:36:15 -0700 (PDT) Date: Thu, 5 Jun 1997 21:36:15 -0700 (PDT) Message-Id: <199706060436.VAA16559@silvia.HIP.Berkeley.EDU> To: james@nexis.net CC: ports@freebsd.org, rdm@cfcl.com In-reply-to: (message from James FitzGibbon on Fri, 6 Jun 1997 00:29:51 -0400 (EDT)) Subject: Re: first cut of multiple architecture support From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk * Personally, I think that the main targets should be smart * enough to use defined variables rather than create an extra 10 * or 12 targets per OS. Well, one problem is that OPSYS and ARCH are not defined until you read bsd.port.mk. So you can't really do much in the port Makefile (unless you put the targets after the ".include " line, which will open a whole new can of worms). Now that I thought more, I think this should be handled in the new "Makefile.*" include files. Please forget I ever mentioned this. ;) Satoshi From owner-freebsd-ports Thu Jun 5 21:40:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA26367 for ports-outgoing; Thu, 5 Jun 1997 21:40:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA26342; Thu, 5 Jun 1997 21:40:02 -0700 (PDT) Date: Thu, 5 Jun 1997 21:40:02 -0700 (PDT) Message-Id: <199706060440.VAA26342@hub.freebsd.org> To: freebsd-ports Cc: From: asami@cs.berkeley.edu (Satoshi Asami) Subject: Re: ports/3357: I make "pari-GP" ports Reply-To: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3357; it has been noted by GNATS. From: asami@cs.berkeley.edu (Satoshi Asami) To: yoshiaki@kt.rim.or.jp Cc: yoshiaki@kt.rim.or.jp, freebsd-gnats-submit@freebsd.org Subject: Re: ports/3357: I make "pari-GP" ports Date: Thu, 5 Jun 1997 19:48:32 -0700 (PDT) * Yes. I'll put a notice MESSAGE and delete NO_PACKAGE. And, send-pr * again. Is that all right ? Thanks. And no, not a new send-pr, just "reply" to this message so we can keep track of the changes in the same PR's audit-trail. Satoshi From owner-freebsd-ports Thu Jun 5 21:40:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA26383 for ports-outgoing; Thu, 5 Jun 1997 21:40:06 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id VAA26360; Thu, 5 Jun 1997 21:40:03 -0700 (PDT) Date: Thu, 5 Jun 1997 21:40:03 -0700 (PDT) Message-Id: <199706060440.VAA26360@hub.freebsd.org> To: freebsd-ports Cc: From: asami@cs.berkeley.edu (Satoshi Asami) Subject: Re: ports/3757 Reply-To: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3757; it has been noted by GNATS. From: asami@cs.berkeley.edu (Satoshi Asami) To: rssh@cki.ipri.kiev.ua Cc: freebsd-gnats-submit@freebsd.org Subject: Re: ports/3757 Date: Thu, 5 Jun 1997 19:45:31 -0700 (PDT) * New put, becouse many is changed, new files is added --- so, * new put in this case better then diff. Thanks...by the way, the "please submit diff" comment applies when the original is committed. If you are changing your own port that's still in incoming/, a new tarball is fine. I took a look at the port, it looks much better now. I made a few changes: === diff -ru simpack/Makefile simpack.new/Makefile --- simpack/Makefile Thu Jun 5 03:23:30 1997 +++ simpack.new/Makefile Thu Jun 5 19:23:20 1997 @@ -7,13 +7,12 @@ # DISTNAME= simpack-3.0 -DISTFILES= SimPack3.tar.Z -CATEGORIES= match +CATEGORIES= math MASTER_SITES= ftp://ftp.cis.ufl.edu/pub/simdigest/tools/ +DISTFILES= SimPack3.tar.Z MAINTAINER= rssh@cki.ipri.kiev.ua -EXTRACT_SUFX= .tar.Z WRKSRC= ${WRKDIR}/simpack post-build: create-libs create-scripts @@ -21,35 +20,34 @@ do-install: do-install-bin do-install-include do-install-lib do-install-doc post-install: - @/sbin/ldconfig ${PREFIX}/lib - + @${LDCONFIG} ${PREFIX}/lib do-install-bin: - @for i in `cat ${FILESDIR}/FILES-BIN` ; do \ + @for i in `${CAT} ${FILESDIR}/FILES-BIN` ; do \ ${INSTALL_PROGRAM} ${WRKSRC}/$$i ${PREFIX}/bin; \ done @${INSTALL_SCRIPT} ${WRKDIR}/temp/sdsmt.alias ${PREFIX}/bin/sdsmt @${INSTALL_SCRIPT} ${WRKDIR}/temp/deq.alias ${PREFIX}/bin/deq do-install-include: - @mkdir -p ${PREFIX}/include/Sim++ - @for i in `cat ${FILESDIR}/FILES-INCLUDE-SIMPP` ; do \ + @${MKDIR} ${PREFIX}/include/Sim++ + @for i in `${CAT} ${FILESDIR}/FILES-INCLUDE-SIMPP` ; do \ ${INSTALL_DATA} ${WRKSRC}/$$i ${PREFIX}/include/Sim++ ; \ done - @mkdir -p ${PREFIX}/include/queuing - @for i in `cat ${FILESDIR}/FILES-INCLUDE-QUEUING` ; do \ + @${MKDIR} ${PREFIX}/include/queuing + @for i in `${CAT} ${FILESDIR}/FILES-INCLUDE-QUEUING` ; do \ ${INSTALL_DATA} ${WRKSRC}/$$i ${PREFIX}/include/queuing/ ; \ done do-install-lib: - @mkdir -p ${PREFIX}/lib/Sim++/olb - @for i in `cat ${FILESDIR}/FILES-OLB` ; do \ + @${MKDIR} ${PREFIX}/lib/Sim++/olb + @for i in `${CAT} ${FILESDIR}/FILES-OLB` ; do \ ${INSTALL_DATA} ${WRKSRC}/$$i ${PREFIX}/lib/Sim++/olb/ ; \ done - @for i in `cat ${FILESDIR}/DIRS-LIB` ; do \ - mkdir -p ${PREFIX}/lib/SimPack/$$i ; \ + @for i in `${CAT} ${FILESDIR}/DIRS-LIB` ; do \ + ${MKDIR} ${PREFIX}/lib/SimPack/$$i ; \ done - @for i in `cat ${FILESDIR}/FILES-LIB` ; do \ + @for i in `${CAT} ${FILESDIR}/FILES-LIB` ; do \ ${INSTALL_DATA} ${WRKSRC}/$$i ${PREFIX}/lib/SimPack/$$i ; \ done @${INSTALL_DATA} ${WRKDIR}/temp/libsim++.a ${PREFIX}/lib/libsim++.a @@ -58,75 +56,68 @@ @${INSTALL_DATA} ${WRKDIR}/temp/libqueuing.a ${PREFIX}/lib/libqueuing.a; @${INSTALL_DATA} ${WRKDIR}/temp/libqueuing.so.1.0 \ ${PREFIX}/lib/libqueuing.so.1.0 - - do-install-doc: - @for i in `cat ${FILESDIR}/DIRS-SHARE` ; do \ - mkdir -p ${PREFIX}/share/SimPack/$$i; \ + @for i in `${CAT} ${FILESDIR}/DIRS-SHARE` ; do \ + ${MKDIR} ${PREFIX}/share/SimPack/$$i; \ done - @for i in `cat ${FILESDIR}/FILES-SHARE` ; do \ + @for i in `${CAT} ${FILESDIR}/FILES-SHARE` ; do \ ${INSTALL_DATA} ${WRKSRC}/$$i ${PREFIX}/share/SimPack/$$i ; \ done create-libs: create-lib-sim++ create-lib-queuing -create-lib-sim++: ${WRKDIR}/temp/.created - @echo libsim++.a - @mkdir -p ${WRKDIR}/temp +create-lib-sim++: + @${ECHO} libsim++.a + @${MKDIR} ${WRKDIR}/temp @(cd ${WRKDIR}/temp; \ - for i in `cat ${FILESDIR}/FILES-SRC-SIMPP` ; do \ + for i in `${CAT} ${FILESDIR}/FILES-SRC-SIMPP` ; do \ gcc -I${WRKSRC}/func/event/include -c -O \ ${WRKSRC}/func/event/src/$$i ; \ done; \ ${AR} cq libsim++.a `lorder *.o | tsort -q `; \ - rm *.o ) - @echo libsim++.so.1.0 + ${RM} *.o ) + @${ECHO} libsim++.so.1.0 @(cd ${WRKDIR}/temp; \ - for i in `cat ${FILESDIR}/FILES-SRC-SIMPP` ; do \ + for i in `${CAT} ${FILESDIR}/FILES-SRC-SIMPP` ; do \ gcc -fpic -DPIC -I${WRKSRC}/func/event/include -c -O \ -o `basename $$i cpp`.so \ ${WRKSRC}/func/event/src/$$i ; \ done; \ ${LD} -Bshareable -x -o libsim++.so.1.0 \ `lorder *.so | tsort -q ` ; \ - rm *.so ) + ${RM} *.so ) -create-lib-queuing: ${WRKDIR}/temp/.created - @echo libqueuing.a +create-lib-queuing: + @${ECHO} libqueuing.a @(cd ${WRKDIR}/temp; \ gcc -I${WRKSRC}/func/queuing -c -O \ ${WRKSRC}/func/queuing/queuing.c; \ ${AR} cq libqueuing.a `lorder *.o | tsort -q `; \ - rm *.o ) - @echo libqueuing.so.1.0 + ${RM} *.o ) + @${ECHO} libqueuing.so.1.0 @(cd ${WRKDIR}/temp; \ gcc -fpic -DPIC -I${WRKSRC}/func/queuing -c -O \ -o queuing.so \ ${WRKSRC}/func/queuing/queuing.c ; \ ${LD} -Bshareable -x -o libqueuing.so.1.0 \ `lorder *.so | tsort -q ` ; \ - rm *.so ) + ${RM} *.so ) create-scripts: create-sdsmt-alias create-deq-alias -create-sdsmt-alias: ${WRKDIR}/temp/.created - @echo SDSMTLIB=${PREFIX}/lib/SimPack/func/slice/sdsmt \ +create-sdsmt-alias: + @${ECHO} SDSMTLIB=${PREFIX}/lib/SimPack/func/slice/sdsmt \ > ${WRKDIR}/temp/sdsmt.alias - @echo export SDSMTLIB >> ${WRKDIR}/temp/sdsmt.alias - @echo wish4.1 ${PREFIX}/lib/SimPack/func/slice/sdsmt/sdsmt \ + @${ECHO} export SDSMTLIB >> ${WRKDIR}/temp/sdsmt.alias + @${ECHO} wish4.1 ${PREFIX}/lib/SimPack/func/slice/sdsmt/sdsmt \ >> ${WRKDIR}/temp/sdsmt.alias -create-deq-alias: ${WRKDIR}/temp/.created - @echo PATCH=${PREFIX}/lib/SimPack/constraint/differential:$$PATCH \ +create-deq-alias: + @${ECHO} PATCH=${PREFIX}/lib/SimPack/constraint/differential:$$PATCH \ > ${WRKDIR}/temp/deq.alias - @echo export PATCH >> ${WRKDIR}/temp/deq.alias - @echo ${PREFIX}/lib/SimPack/constraint/differential/deq $$* \ + @${ECHO} export PATCH >> ${WRKDIR}/temp/deq.alias + @${ECHO} ${PREFIX}/lib/SimPack/constraint/differential/deq $$* \ >> ${WRKDIR}/temp/deq.alias - -${WRKDIR}/temp/.created: - @mkdir -p ${WRKDIR}/temp - @touch ${WRKDIR}/temp/.created - .include diff -ru simpack/pkg/PLIST simpack.new/pkg/PLIST --- simpack/pkg/PLIST Thu Jun 5 03:15:56 1997 +++ simpack.new/pkg/PLIST Thu Jun 5 19:23:50 1997 @@ -1,4 +1,3 @@ -@name simpack-3.0 bin/fsa bin/markov bin/petri === Most of the changes are cosmetic, i.e., remonving extra spaces at the end of line, etc. Actually now that I look at the diffs, I may have screwed up your neatly aligned \'s. Sorry if that's the case. By the way, before I commit this, I have one more request: this port asks several questions. They are either (1) have you read the license, and do you agree to abide with it?, or (2) do you want to build this part of the package? For (1), I would like you to make it print the license regardless. You can print it from pkg/INSTALL (as a post-installation script -- see pkg_add(1)) and also call it from post-install. Make sure that you don't ask the question if BATCH or PACKAGE_BUILDING is defined (I don't care which, I set them both) so it won't interrupt batch package builds. You can alternatively do it from the pkg/REQ script, but that is less convenient because none of the files have been extracted at that point. (Instead of "cat ", you need to embed the license itself in the script.) If you can do it that way, it is fine too (and is probably more in line with the original author's intent). As for (2), I don't think we should be asking users those kind of questions. Can you patch the source so "y" is assumed for all of them? Thanks, Satoshi From owner-freebsd-ports Thu Jun 5 22:00:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA27234 for ports-outgoing; Thu, 5 Jun 1997 22:00:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA27214; Thu, 5 Jun 1997 22:00:01 -0700 (PDT) Date: Thu, 5 Jun 1997 22:00:01 -0700 (PDT) Message-Id: <199706060500.WAA27214@hub.freebsd.org> To: freebsd-ports Cc: From: "Pedro F. Giffuni" Subject: Re: ports/3484: libwww is out of date Reply-To: "Pedro F. Giffuni" Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3484; it has been noted by GNATS. From: "Pedro F. Giffuni" To: freebsd-gnats-submit@freebsd.org Cc: Subject: Re: ports/3484: libwww is out of date Date: Thu, 05 Jun 1997 23:54:36 -0700 5.0 once built out of the box, but 5.1b (Final release) has several bugs reported when building under FreeBSD. http://www.w3.org/Library/User/Patch/ libwww would also be useful for porting Thot and Amaya. In a future, we should also nuke the linemode browser since it is included in libwww's distribution. From owner-freebsd-ports Thu Jun 5 22:01:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA27377 for ports-outgoing; Thu, 5 Jun 1997 22:01:41 -0700 (PDT) Received: from misery.sdf.com (misery.sdf.com [204.244.210.193]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA27366 for ; Thu, 5 Jun 1997 22:01:38 -0700 (PDT) Received: from localhost (tom@localhost) by misery.sdf.com (8.8.5/8.8.5) with SMTP id WAA08864; Thu, 5 Jun 1997 22:00:20 -0700 (PDT) X-Authentication-Warning: misery.sdf.com: tom owned process doing -bs Date: Thu, 5 Jun 1997 22:00:19 -0700 (PDT) From: Tom Samplonius To: Satoshi Asami cc: ports@FreeBSD.ORG Subject: Re: ports/comms/hylafax In-Reply-To: <199706060125.SAA29193@silvia.HIP.Berkeley.EDU> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 5 Jun 1997, Satoshi Asami wrote: ... > I'm sorry, but those are more of special cases and not the rule. > ncftp2 and perl5 are both newer versions of what is/has been in the > main source tree. (There never would have been both ncftp1 and ncftp2 > in the ports tree if ncftp1 wasn't in the main source tree before.) ... I dunno. I don't like ncftp2 very much. I've never been able to pipe files into a process with it. It always tries to be smart, and convert my get into a mget if I do something like: get floppies.tar "| tar xf -" This works in ncftp1, but not in ncftp2. Tom From owner-freebsd-ports Thu Jun 5 22:45:28 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id WAA29524 for ports-outgoing; Thu, 5 Jun 1997 22:45:28 -0700 (PDT) Received: from ohm.ingsala.unal.edu.co ([168.176.15.18]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id WAA29518 for ; Thu, 5 Jun 1997 22:45:22 -0700 (PDT) Received: from unalmodem.usc.unal.edu.co (unalmodem03.usc.unal.edu.co [168.176.3.33]) by ohm.ingsala.unal.edu.co (8.8.5/8.8.5) with SMTP id AAA07558 for ; Fri, 6 Jun 1997 00:46:47 -0500 (COT) Message-ID: <3397BF3B.9DB@fps.biblos.unal.edu.co> Date: Fri, 06 Jun 1997 00:41:47 -0700 From: "Pedro F. Giffuni" Organization: Universidad Nacional de Colombia X-Mailer: Mozilla 3.0 (Win16; I) MIME-Version: 1.0 To: ports@freebsd.org Subject: CDE-like panel for fvwm Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I'm sure someone will like to look at this: http://www.infinet.com/~gnosis/CDEm2.html and for the curious, I just followed this link with some interesting new things: http://www.xnet.com/~blatura/linapps.shtml have fun, and leave me something to port when I'm back ;-) Pedro. From owner-freebsd-ports Fri Jun 6 00:00:12 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA03099 for ports-outgoing; Fri, 6 Jun 1997 00:00:12 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA03081; Fri, 6 Jun 1997 00:00:04 -0700 (PDT) Date: Fri, 6 Jun 1997 00:00:04 -0700 (PDT) Message-Id: <199706060700.AAA03081@hub.freebsd.org> To: freebsd-ports Cc: From: asami@cs.berkeley.edu (Satoshi Asami) Subject: Re: ports/3757 Reply-To: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3757; it has been noted by GNATS. From: asami@cs.berkeley.edu (Satoshi Asami) To: rssh@cki.ipri.kiev.ua, freebsd-gnats-submit@FreeBSD.ORG Cc: Subject: Re: ports/3757 Date: Thu, 5 Jun 1997 23:52:09 -0700 (PDT) Oops, I made a mistake here: * - @/sbin/ldconfig ${PREFIX}/lib * - * + @${LDCONFIG} ${PREFIX}/lib This should be * + @${LDCONFIG} -m ${PREFIX}/lib Satoshi From owner-freebsd-ports Fri Jun 6 00:51:43 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA05371 for ports-outgoing; Fri, 6 Jun 1997 00:51:43 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA05362; Fri, 6 Jun 1997 00:51:26 -0700 (PDT) From: "David E. O'Brien" Received: (from obrien@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA16297; Fri, 6 Jun 1997 00:51:08 -0700 (PDT) Date: Fri, 6 Jun 1997 00:51:08 -0700 (PDT) Message-Id: <199706060751.AAA16297@freefall.freebsd.org> To: junker@jazz.snu.ac.kr, obrien@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG, obrien@FreeBSD.ORG Subject: Re: ports/3336 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: new port request of korean/hanmutt State-Changed-From-To: analyzed-closed State-Changed-By: obrien State-Changed-When: Fri Jun 6 00:50:31 PDT 1997 State-Changed-Why: port commited. Responsible-Changed-From-To: freebsd-ports->obrien Responsible-Changed-By: obrien Responsible-Changed-When: Fri Jun 6 00:50:31 PDT 1997 Responsible-Changed-Why: did the commit. From owner-freebsd-ports Fri Jun 6 01:31:42 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id BAA07268 for ports-outgoing; Fri, 6 Jun 1997 01:31:42 -0700 (PDT) Received: from haldjas.folklore.ee (Haldjas.folklore.ee [193.40.6.121]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id BAA07102 for ; Fri, 6 Jun 1997 01:27:20 -0700 (PDT) Received: from localhost (narvi@localhost) by haldjas.folklore.ee (8.8.4/8.8.4) with SMTP id LAA24455; Fri, 6 Jun 1997 11:23:51 +0300 (EEST) Date: Fri, 6 Jun 1997 11:23:51 +0300 (EEST) From: Narvi To: Satoshi Asami cc: james@nexis.net, ports@FreeBSD.ORG, rdm@cfcl.com Subject: Re: first cut of multiple architecture support In-Reply-To: <199706060436.VAA16559@silvia.HIP.Berkeley.EDU> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Thu, 5 Jun 1997, Satoshi Asami wrote: > * Personally, I think that the main targets should be smart > * enough to use defined variables rather than create an extra 10 > * or 12 targets per OS. > > Well, one problem is that OPSYS and ARCH are not defined until you > read bsd.port.mk. So you can't really do much in the port Makefile > (unless you put the targets after the ".include " line, > which will open a whole new can of worms). > Well, why not have ARCH & OPSYS defined in /etc/make.conf? Yes, I know, it is not the first time I suggest adding something to there... But at least theoretically they could be also used when FreeBSD moves to a non-intel architecture. One could in that way (at least theoretically) cross-build ports/packages for another architecure. Sander > Now that I thought more, I think this should be handled in the new > "Makefile.*" include files. Please forget I ever mentioned this. ;) > > Satoshi > From owner-freebsd-ports Fri Jun 6 03:00:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA10882 for ports-outgoing; Fri, 6 Jun 1997 03:00:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id DAA10874; Fri, 6 Jun 1997 03:00:02 -0700 (PDT) Date: Fri, 6 Jun 1997 03:00:02 -0700 (PDT) Message-Id: <199706061000.DAA10874@hub.freebsd.org> To: freebsd-ports Cc: From: Yoshiaki Uchikawa Subject: Re: ports/3357: I make "pari-GP" ports Reply-To: Yoshiaki Uchikawa Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk The following reply was made to PR ports/3357; it has been noted by GNATS. From: Yoshiaki Uchikawa To: asami@cs.berkeley.edu (Satoshi Asami) Cc: yoshiaki@kt.rim.or.jp, freebsd-gnats-submit@freebsd.org Subject: Re: ports/3357: I make "pari-GP" ports Date: Fri, 06 Jun 1997 18:50:09 +0900 >>>>> In <199706060248.TAA29557@silvia.HIP.Berkeley.EDU> >>>>> asami@cs.berkeley.edu (Satoshi Asami) wrote: > Thanks. And no, not a new send-pr, just "reply" to this message so we > can keep track of the changes in the same PR's audit-trail. OK. I put new pari-GP ports. ftp://ftp.FreeBSD.ORG/pub/FreeBSD/incoming/pari-970606.tar.gz Please check pkg/MESSAGE. My english is very poor :). ---- yoshiaki@kt.rim.or.jp From owner-freebsd-ports Fri Jun 6 06:22:24 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA19391 for ports-outgoing; Fri, 6 Jun 1997 06:22:24 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA19384; Fri, 6 Jun 1997 06:22:17 -0700 (PDT) From: "Andrey A. Chernov" Received: (from ache@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id GAA18372; Fri, 6 Jun 1997 06:21:58 -0700 (PDT) Date: Fri, 6 Jun 1997 06:21:58 -0700 (PDT) Message-Id: <199706061321.GAA18372@freefall.freebsd.org> To: ache@FreeBSD.ORG, ache@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3256 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: ncftp-2.4.2 in packages-2.2 was not linked readline Responsible-Changed-From-To: ache->freebsd-ports Responsible-Changed-By: ache Responsible-Changed-When: ÐÔ 6 ÉÀÎ 1997 06:19:42 PDT Responsible-Changed-Why: This bug report about packages 2.2 while I maintain only -current version From owner-freebsd-ports Fri Jun 6 07:07:15 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA21344 for ports-outgoing; Fri, 6 Jun 1997 07:07:15 -0700 (PDT) Received: from merlin.ec.camitel.com (merlin.ec.camitel.com [206.231.123.137]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA21338 for ; Fri, 6 Jun 1997 07:07:07 -0700 (PDT) Received: (from cfortin@localhost) by merlin.ec.camitel.com (8.8.5/8.8.5) id KAA04862 for FREEBSD-PORTS@freebsd.org; Fri, 6 Jun 1997 10:14:21 -0400 (EDT) Message-ID: X-Mailer: XFMail 1.1 [p0] on FreeBSD Content-Type: text/plain; charset=us-ascii MIME-Version: 1.0 Resent-Date: Thu, 5 Jun 1997 16:00:42 -0600 Resent-Message-Id: <01BC71C9.9FCE64C0@ip17.sdcorp.com> Resent-From: Brad Caldwell Resent-To: "cfortin@ec.camitel.com" Date: Fri, 06 Jun 1997 10:12:33 -0400 (EDT) From: Christian Fortin To: FREEBSD-PORTS@freebsd.org Subject: Wordperfect 7.0 Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id HAA21339 Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk For any interesded person: -----FW: <01BC71C9.9FCE64C0@ip17.sdcorp.com>----- Date: Thu, 5 Jun 1997 16:00:42 -0600 From: Brad Caldwell To: "cfortin@ec.camitel.com" Subject: CWPLINUX 7 Cc: Becky Bitter Christian Please submit any bugs you find in CWPLINUX 7 to our problem report page at the following URL: http://www.sdcorp.com/support/onlinesupp/supreport.htm CWPLINUX 7 has been ready from a development viewpoint since April 15. We are n ow waiting for final distribution and pricing models to be approved before the p roduct will be made available to the public. I'm not sure exactly when the prod uct will be selling but I suspect it will take only one or two more weeks. >If we want to adapte our Linux emulator for run WPlinux cleanly.... Can you pro vide some free help ? It depends on what type of help and how much you require. Can you be more speci fic? > We can distribute freely a Free demo of WP on the comercial section of FreeBSD site... With this free advertisement, > you can reach many thousen of peoples. Each day, the FTP site have an average of simultanous FTP connection rate > to 1200 connection. ( 2000 Max ) The FTP server run FreeBSD and drive 3 45MBps links ( T3 ). > That's the server that transfer the hightes amount of data around the world... Yes you may freely distribute the evaluation copy of CWPLINUX 7 around the world . You may want to wait until the shipping copy is available as it will have som e new capabilities. Please let me know if you have any additional questions. If I have missed some of your questions please let me know. Thank you for your interest in CWPLINUX 7. -----Original Message----- From: Becky Bitter [SMTP:becky@sdcorp.com] Sent: Thursday, June 05, 1997 11:34 AM To: Brad Caldwell Subject: Fw: WPlinux ---------- > From: Christian Fortin > To: becky@sdcorp.com > Subject: WPlinux > Date: Wednesday, June 04, 1997 8:21 PM > > Hi, > I want to know more about your beta tester program... > > I use wp7linuxbetab.tar.gz on the FreeBSD 2.2.2 Unix platforme > ( http://www.freebsd.org ) > It work fine... but you use some feature of /bin/bash ... > ( On Linux, /bin/sh = /bin/bash , but only on Linux... ) > and it's not compatible with the ISO /bin/sh. > I can't find what's wrong because the trouble is inside the 7b_ins00.bk. > And it's a binary format, not a shell script. > > An other problem, > When the WP hang, I am not able to kill the process... > ( kill -9 PID .. :-( ) > > When the full release will be avalable ? I have a contract that depend of the av > alability of this software. Price ??? > > I need the french canadien version. > > Is it possible to take WP for prepare submission from web page. I want to drag a > windows on a graphic web page for include in the submission. After, I need > to fax it. I will use hylafax from SGI ( It's free... ) > ( http://www.vix.com/hylafax ) > > If we want to adapte our Linux emulator for run WPlinux cleanly.... Can you > provide some free help ? > > We can distribute freely a Free demo of WP on the comercial section of FreeBSD s > ite... With this free advertisement, you can reach many thousen of peoples. > Each day, the FTP site have an average of simultanous FTP connection rate to > 1200 connection. ( 2000 Max ) The FTP server run FreeBSD and drive 3 45MBps > links ( T3 ). > That's the server that transfer the hightes amount of data around the world... > > I wait new from you... > > Thank's > From owner-freebsd-ports Fri Jun 6 08:03:01 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA23935 for ports-outgoing; Fri, 6 Jun 1997 08:03:01 -0700 (PDT) Received: from Campino.Informatik.RWTH-Aachen.DE (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA23929 for ; Fri, 6 Jun 1997 08:02:58 -0700 (PDT) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.31.2]) by Campino.Informatik.RWTH-Aachen.DE (RBI-Z-5/8.6.12) with ESMTP id RAA27033 for ; Fri, 6 Jun 1997 17:03:03 +0200 (MET DST) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.8.5/8.6.9) id RAA20918 for freebsd-ports@freefall.cdrom.com; Fri, 6 Jun 1997 17:06:43 +0200 (MEST) Date: Fri, 6 Jun 1997 17:06:43 +0200 (MEST) From: Christoph Kukulies Message-Id: <199706061506.RAA20918@gil.physik.rwth-aachen.de> To: freebsd-ports@freefall.FreeBSD.org Subject: mutt-0.75 --with-slang Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >> Checksum OK for mutt/mutt-0.75e.tar.gz. ===> Building for mutt-0.75 cc -O -DSHAREDIR=\"/usr/local/share/misc\" -I. -I. -c curs_lib.c curs_lib.c: In function `ci_enter_string': curs_lib.c:235: `SL_KEY_DELETE' undeclared (first use this function) curs_lib.c:235: (Each undeclared identifier is reported only once curs_lib.c:235: for each function it appears in.) *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Hhmm. I rebuilt/installed slang-0.38 - BTW, what is target install-elf (which doesn't work with me here) - and it didn't help either. (3.0-current of begin of May) -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de From owner-freebsd-ports Fri Jun 6 08:10:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24206 for ports-outgoing; Fri, 6 Jun 1997 08:10:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA24200; Fri, 6 Jun 1997 08:10:01 -0700 (PDT) Resent-Date: Fri, 6 Jun 1997 08:10:01 -0700 (PDT) Resent-Message-Id: <199706061510.IAA24200@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, hideyuki@sat.t.u-tokyo.ac.jp Received: from mail.sat.t.u-tokyo.ac.jp (dryad.sat.t.u-tokyo.ac.jp [133.11.70.140]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA23912 for ; Fri, 6 Jun 1997 08:02:17 -0700 (PDT) Received: by mail.sat.t.u-tokyo.ac.jp (8.7.5+2.6Wbeta7/3.4Wbeta6-SAT1.0) with ESMTP id AAA29410; Sat, 7 Jun 1997 00:02:11 +0900 (JST) Received: by ichi.sat.t.u-tokyo.ac.jp (8.8.5/sat-V0.6) id AAA07738; Sat, 7 Jun 1997 00:02:10 +0900 (JST) Message-Id: <199706061502.AAA07738@ichi.sat.t.u-tokyo.ac.jp> Date: Sat, 7 Jun 1997 00:02:10 +0900 (JST) From: Hideyuki Suzuki Reply-To: hideyuki@sat.t.u-tokyo.ac.jp To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3802: Ctrl+Space does not work on KON2 port Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3802 >Category: ports >Synopsis: Ctrl+Space does not work on KON2 port >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Fri Jun 6 08:10:01 PDT 1997 >Last-Modified: >Originator: Hideyuki Suzuki >Organization: University of Tokyo >Release: FreeBSD 2.2-STABLE i386 >Environment: KON2 port in port-current. >Description: Ctrl+Space (= nul) does not work on KON2. >How-To-Repeat: Try in vain to mark with Ctrl+Space on emacs. >Fix: Apply this patch to the current port of japanese/kon2 diff -urN kon2.old/patches/patch-af kon2/patches/patch-af --- kon2.old/patches/patch-af Wed Jun 4 18:29:13 1997 +++ kon2/patches/patch-af Sat Apr 26 03:54:54 1997 @@ -1,57 +1,6 @@ --- src/term.c.orig Sat Jan 25 00:03:58 1997 -+++ src/term.c Mon May 12 09:01:10 1997 -@@ -156,6 +156,33 @@ - numFds = sockFd + 1; - } - -+#if defined(__FreeBSD__) -+static void strconvert(char *buff, char *fromstr, char *tostr) -+{ -+ char *pos; -+ -+ while ((pos = strstr(buff, fromstr))!=NULL) { -+ memmove(pos + strlen(tostr), pos + strlen(fromstr), -+ strlen(pos)-strlen(fromstr)+1); -+ memcpy(pos, tostr, strlen(tostr)); -+ } -+} -+ -+static void cons2vt100(char *buff) -+{ -+ strconvert(buff, "\x1b[A", "\x1bOA"); /* ku */ -+ strconvert(buff, "\x1b[B", "\x1bOB"); /* kd */ -+ strconvert(buff, "\x1b[C", "\x1bOC"); /* kl */ -+ strconvert(buff, "\x1b[D", "\x1bOD"); /* kr */ -+ strconvert(buff, "\x1b[H", "\x1b[1~" ); /* kh */ -+ strconvert(buff, "\x1b[L", "\x1b[2~" ); /* kI */ -+ strconvert(buff, "\x7f", "\x1b[3~" ); /* kD */ -+ strconvert(buff, "\x08", "\x7f"); /* kb */ -+ strconvert(buff, "\x1b[I", "\x1b[5~"); /* kP */ -+ strconvert(buff, "\x1b[G", "\x1b[6~"); /* kN */ -+} -+#endif -+ - static void ConsoleHandler(void) - { - static u_char buff[BUFSIZ + 1]; -@@ -200,12 +227,23 @@ - } - } - if (FD_ISSET(0, &readFds)) { -+#if defined(__FreeBSD__) -+ i = read(0, buff, BUFSIZ/4); -+#else - i = read(0, buff, BUFSIZ); -- if (i > 0) write(masterPty, buff, i); -+#endif -+ if (i > 0) { -+#if defined(__FreeBSD__) -+ buff[i] = 0; -+ cons2vt100(buff); -+ i = strlen(buff); -+#endif -+ write(masterPty, buff, i); -+ } ++++ src/term.c Sat Apr 26 03:54:03 1997 +@@ -205,7 +205,7 @@ PollCursor(TRUE); } if (FD_ISSET(sockFd, &readFds)) SocketInterface(sockFd); diff -urN kon2.old/pkg/DESCR kon2/pkg/DESCR --- kon2.old/pkg/DESCR Wed Jun 4 18:29:13 1997 +++ kon2/pkg/DESCR Fri Jun 6 23:43:22 1997 @@ -8,3 +8,13 @@ Be aware that using KON2 with X is not allowed (You should shutdown X first when you use KON2, and vice versa). + +In order to use 30 lines (default is 25), modify the "Normal" entry of +kon.cfg as follows: +------- +VGA:Normal + VGA + 640 680 768 800 480 491 493 525 + 1 + 79 29 +------- >Audit-Trail: >Unformatted: From owner-freebsd-ports Fri Jun 6 12:33:49 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA06527 for ports-outgoing; Fri, 6 Jun 1997 12:33:49 -0700 (PDT) Received: (from asami@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA06487; Fri, 6 Jun 1997 12:33:34 -0700 (PDT) Date: Fri, 6 Jun 1997 12:33:34 -0700 (PDT) From: Satoshi Asami Message-Id: <199706061933.MAA06487@hub.freebsd.org> To: asami, freebsd-ports, ache Subject: Re: ports/3256 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: ncftp-2.4.2 in packages-2.2 was not linked readline Responsible-Changed-From-To: freebsd-ports->ache Responsible-Changed-By: asami Responsible-Changed-When: Fri Jun 6 12:22:07 PDT 1997 Responsible-Changed-Why: I wish you read your mail more carefully. I verified the problem still happens on ports-current too. Here is the log: ## make install >> Checksum OK for ncftp-2.4.2.tar.gz. ===> Extracting for ncftp-2.4.2 ===> Patching for ncftp-2.4.2 ===> Applying FreeBSD patches for ncftp-2.4.2 ===> Configuring for ncftp-2.4.2 : checking for extra include and lib directories... checking for -lreadline... no : checking for readline/history.h... yes checking for cursesX.h... no checking for ncurses.h... yes : ===> Building for ncftp-2.4.2 : cc -O2 -pipe Bookmark.o Cmdline.o Cmdlist.o Cmds.o Complete.o Cpp.o DateSize.o FTP.o Get.o GetPass.o Getopt.o Sio.o Glob.o Hostwin.o LGets.o LineList.o List.o Macro.o Main.o MakeArgv.o Open.o Prefs.o Progress.o Put.o RCmd.o Strn.o Tips.o Util.o WGets.o Win.o Xfer.o -o ncftp -L/usr/local/lib -lreadline -lncurses -lmytinfo -rwxr-xr-x 1 root wheel 157486 Jun 6 12:13 ncftp Done. : ## ldd /usr/local/bin/ncftp2 /usr/local/bin/ncftp2: -lncurses.3 => /usr/lib/libncurses.so.3.0 (0x2003f000) -lmytinfo.2 => /usr/lib/libmytinfo.so.2.0 (0x2004e000) -lc.3 => /usr/lib/libc.so.3.0 (0x20063000) ## ldconfig -r | grep readline 99:-lreadline.3.0 => /usr/lib/libreadline.so.3.0 ## ls -slg /usr/lib/libreadline* /usr/local/lib/libreadline* 176 -r--r--r-- 1 bin bin 165538 Jun 4 21:37 /usr/lib/libreadline.a 152 -r--r--r-- 1 bin bin 140358 Jun 4 21:37 /usr/lib/libreadline.so.3.0 184 -r--r--r-- 1 bin bin 180018 Jun 4 21:37 /usr/lib/libreadline_p.a 152 -r--r--r-- 1 bin bin 145588 May 28 03:08 /usr/local/lib/libreadline.a 144 -r-xr-xr-x 1 bin bin 135991 May 28 03:08 /usr/local/lib/libreadline.so* It appears it is picking up libreadline.a from /usr/local/lib, even though it finds there is no -lreadline. devel/linuxgdb and devel/scogdb both have lib/libreadline.a listed in their PLISTs, even though neither lists libreadline.so. Anyway, can you change ncftp2 to always use /usr/lib's libreadline? We don't want the build to be affected by other ports, especially for things like libreadline that many software wants to install their own version of. From owner-freebsd-ports Fri Jun 6 14:40:13 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id OAA13943 for ports-outgoing; Fri, 6 Jun 1997 14:40:13 -0700 (PDT) Received: from nagual.pp.ru (ache.relcom.ru [194.58.229.133]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id OAA13934; Fri, 6 Jun 1997 14:40:04 -0700 (PDT) Received: (from ache@localhost) by nagual.pp.ru (8.8.5/8.8.5) id BAA00897; Sat, 7 Jun 1997 01:40:06 +0400 (MSD) Date: Sat, 7 Jun 1997 01:40:02 +0400 (MSD) From: =?KOI8-R?B?4c7E0sXKIP7F0s7P1w==?= To: Satoshi Asami cc: asami@hub.freebsd.org, freebsd-ports@hub.freebsd.org Subject: Re: ports/3256 In-Reply-To: <199706061933.MAA06487@hub.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 6 Jun 1997, Satoshi Asami wrote: > 152 -r--r--r-- 1 bin bin 145588 May 28 03:08 /usr/local/lib/libreadline.a > 144 -r-xr-xr-x 1 bin bin 135991 May 28 03:08 /usr/local/lib/libreadline.so* > It appears it is picking up libreadline.a from /usr/local/lib, even > though it finds there is no -lreadline. devel/linuxgdb and devel/scogdb > both have lib/libreadline.a listed in their PLISTs, even though neither > lists libreadline.so. Since I not install all ports (linuxgdb and scogdb) I even can't detect this problem. It looks like error in those ports to install libreadline without renaming it. They must use system one or rename private version to something else. BTW, from where *.so variant appearse? > Anyway, can you change ncftp2 to always use /usr/lib's libreadline? > We don't want the build to be affected by other ports, especially > for things like libreadline that many software wants to install > their own version of. Of course, I can fix this particular thing, but it gains nothing! It is common GNU configure trick to search /usr/local/lib first. I.e. all current and even future soft which use readline and GNU configure will be affected by this bug, so we need to fix too much in this way. IMHO, proper solution will be to fix linuxgdb and scogdb ports instead to not bload reserved namespace. No libreadline or another commonly used library name (libc? :-) must be in /usr/local/lib for GNU configure. -- Andrey A. Chernov http://www.nagual.pp.ru/~ache/ From owner-freebsd-ports Fri Jun 6 15:42:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id PAA16715 for ports-outgoing; Fri, 6 Jun 1997 15:42:03 -0700 (PDT) Received: from vader.cs.berkeley.edu (vader.CS.Berkeley.EDU [128.32.38.234]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA16705; Fri, 6 Jun 1997 15:41:56 -0700 (PDT) Received: (from asami@localhost) by vader.cs.berkeley.edu (8.8.5/8.7.3) id PAA19478; Fri, 6 Jun 1997 15:41:55 -0700 (PDT) Date: Fri, 6 Jun 1997 15:41:55 -0700 (PDT) Message-Id: <199706062241.PAA19478@vader.cs.berkeley.edu> To: erich@freebsd.org CC: ports@freebsd.org Subject: libreadline and *gdb ports From: asami@cs.berkeley.edu (Satoshi Asami) Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Eric, It was brought to my attention that the linuxgdb and scogdb ports install libreadline.a in /usr/local/lib. Since we already have libreadline in /usr/lib, can you make these ports use that instead? Also, I saw a file "libreadline.so" that had the same timestamp as libreadline.a, but it is not listed in either port's PLIST and it didn't get installed when I tried both ports just now. If you have time, can you take a look at that too? Thanks Satoshi From owner-freebsd-ports Fri Jun 6 17:50:03 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA21874 for ports-outgoing; Fri, 6 Jun 1997 17:50:03 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA21867; Fri, 6 Jun 1997 17:50:01 -0700 (PDT) Resent-Date: Fri, 6 Jun 1997 17:50:01 -0700 (PDT) Resent-Message-Id: <199706070050.RAA21867@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, handy@sag.space.lockheed.com Received: from lambic.space.lockheed.com (lambic.space.lockheed.com [192.68.162.69]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA21593 for ; Fri, 6 Jun 1997 17:40:52 -0700 (PDT) Received: (from handy@localhost) by lambic.space.lockheed.com (8.8.5/8.8.5) id RAA04462; Fri, 6 Jun 1997 17:40:40 -0700 (PDT) Message-Id: <199706070040.RAA04462@lambic.space.lockheed.com> Date: Fri, 6 Jun 1997 17:40:40 -0700 (PDT) From: handy@lambic.space.lockheed.com Reply-To: handy@sag.space.lockheed.com To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3803: gv upgrade to 3.4.12 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3803 >Category: ports >Synopsis: gv upgraded to 3.4.12 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Fri Jun 6 17:50:00 PDT 1997 >Last-Modified: >Originator: Brian Handy >Organization: MSU - Bozeman >Release: FreeBSD 2.2-STABLE i386 >Environment: >Description: gv has been upgraded again, and of course the old version has disappeared from the master site. Must avoid the wrath of the dreaded distfile checker... >How-To-Repeat: >Fix: diff -ur gv.orig/Makefile gv/Makefile --- gv.orig/Makefile Fri Jun 6 17:25:21 1997 +++ gv/Makefile Fri Jun 6 17:29:11 1997 @@ -1,12 +1,12 @@ # New ports collection makefile for: gv -# Version required: gv-3.4.3 +# Version required: gv-3.4.12 # Date created: 16 Apr 1996 # Whom: tg@freebsd.org # # $Id: Makefile,v 1.11 1997/05/29 07:21:19 asami Exp $ # -DISTNAME= gv-3.4.3 +DISTNAME= gv-3.4.12 CATEGORIES= print MASTER_SITES= ftp://thep.physik.uni-mainz.de/pub/gv/unix/ diff -ur gv.orig/files/md5 gv/files/md5 --- gv.orig/files/md5 Fri Jun 6 17:25:21 1997 +++ gv/files/md5 Fri Jun 6 17:29:30 1997 @@ -1 +1 @@ -MD5 (gv-3.4.3.tar.gz) = caf0b99bdacfabdfaffad5d1663ec115 +MD5 (gv-3.4.12.tar.gz) = adb6aeca2bb1094297cbfbf4297df4e4 >Audit-Trail: >Unformatted: From owner-freebsd-ports Sat Jun 7 00:28:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA04521 for ports-outgoing; Sat, 7 Jun 1997 00:28:11 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA04471; Sat, 7 Jun 1997 00:27:59 -0700 (PDT) From: Masafumi NAKANE Received: (from max@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA22078; Sat, 7 Jun 1997 00:27:33 -0700 (PDT) Date: Sat, 7 Jun 1997 00:27:33 -0700 (PDT) Message-Id: <199706070727.AAA22078@freefall.freebsd.org> To: hideyuki@sat.t.u-tokyo.ac.jp, max@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3802 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Ctrl+Space does not work on KON2 port State-Changed-From-To: open-closed State-Changed-By: max State-Changed-When: Sat Jun 7 00:26:22 PDT 1997 State-Changed-Why: Submitted fix is integrated. From owner-freebsd-ports Sat Jun 7 00:42:10 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id AAA04904 for ports-outgoing; Sat, 7 Jun 1997 00:42:10 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id AAA04898; Sat, 7 Jun 1997 00:42:05 -0700 (PDT) From: Masafumi NAKANE Received: (from max@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id AAA22238; Sat, 7 Jun 1997 00:41:39 -0700 (PDT) Date: Sat, 7 Jun 1997 00:41:39 -0700 (PDT) Message-Id: <199706070741.AAA22238@freefall.freebsd.org> To: handy@sag.space.lockheed.com, max@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3803 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: gv upgraded to 3.4.12 State-Changed-From-To: open-closed State-Changed-By: max State-Changed-When: Sat Jun 7 00:40:54 PDT 1997 State-Changed-Why: Upgrade is done. From owner-freebsd-ports Sat Jun 7 04:20:05 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA13755 for ports-outgoing; Sat, 7 Jun 1997 04:20:05 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA13727; Sat, 7 Jun 1997 04:20:03 -0700 (PDT) Resent-Date: Sat, 7 Jun 1997 04:20:03 -0700 (PDT) Resent-Message-Id: <199706071120.EAA13727@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, andreas@klemm.gtn.com Received: from news1.gtn.com (news1.gtn.com [194.77.0.15]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id EAA13597 for ; Sat, 7 Jun 1997 04:16:13 -0700 (PDT) Received: (from uucp@localhost) by news1.gtn.com (8.7.2/8.7.2) with UUCP id NAA00835 for FreeBSD-gnats-submit@freebsd.org; Sat, 7 Jun 1997 13:15:08 +0200 (MET DST) Received: (from andreas@localhost) by klemm.gtn.com (8.8.5/8.8.5) id NAA28921; Sat, 7 Jun 1997 13:08:37 +0200 (CEST) Message-Id: <199706071108.NAA28921@klemm.gtn.com> Date: Sat, 7 Jun 1997 13:08:37 +0200 (CEST) From: andreas@klemm.gtn.com Reply-To: andreas@klemm.gtn.com To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3804: apache port shouldn't overwrite existing local config files during installation Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3804 >Category: ports >Synopsis: apache overwrites existing local config files during installation >Confidential: yes >Severity: serious >Priority: high >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Sat Jun 7 04:20:01 PDT 1997 >Last-Modified: >Originator: Andreas Klemm >Organization: home >Release: FreeBSD 3.0-CURRENT i386 >Environment: not relevant >Description: The apache port's install target overwrites the existing local config files in /usr/local/etc/apache. I forgot this one and will have to get my config files back from tape now ;-) Bad luck ;-) Best would be to fix this one now, since there will be many other people who only want to update the WWW server binary, without nuking the local configuration ;-) >How-To-Repeat: Save you local config files first cd /usr/local/etc/apache mkdir .save cp access.conf httpd.conf mime.types srm.conf .save cd /usr/ports/www/apache make all install ls -l /usr/local/etc/apache These new files overwrite your local configuration. -rw-r--r-- 1 bin bin 2127 Jun 7 12:54 access.conf -rw-r--r-- 1 bin bin 6567 Jun 7 12:54 httpd.conf -rw-r--r-- 1 bin bin 2394 Jun 7 12:54 mime.types -rw-r--r-- 1 bin bin 6764 Jun 7 12:54 srm.conf >Fix: Modify the ports install target, so that the new config files will be for example installed as: -rw-r--r-- 1 bin bin 2127 Jun 7 12:54 access.conf-dist -rw-r--r-- 1 bin bin 6567 Jun 7 12:54 httpd.conf-dist -rw-r--r-- 1 bin bin 2394 Jun 7 12:54 mime.types-dist -rw-r--r-- 1 bin bin 6764 Jun 7 12:54 srm.conf-dist The squid port comes to my mind, who does it this way. >Audit-Trail: >Unformatted: From owner-freebsd-ports Sat Jun 7 04:39:52 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id EAA14196 for ports-outgoing; Sat, 7 Jun 1997 04:39:52 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id EAA14189; Sat, 7 Jun 1997 04:39:44 -0700 (PDT) From: "Andrey A. Chernov" Received: (from ache@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id EAA25869; Sat, 7 Jun 1997 04:39:17 -0700 (PDT) Date: Sat, 7 Jun 1997 04:39:17 -0700 (PDT) Message-Id: <199706071139.EAA25869@freefall.freebsd.org> To: andreas@klemm.gtn.com, ache@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3804 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: apache overwrites existing local config files during installation State-Changed-From-To: open-closed State-Changed-By: ache State-Changed-When: Ó 7 ÉÀÎ 1997 04:36:54 PDT State-Changed-Why: Misreported PR. Apache install target NOT overwrites config files. Check what actually happens in your system and re-roll another PR if another reaso will be found. From owner-freebsd-ports Sat Jun 7 05:32:11 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id FAA15477 for ports-outgoing; Sat, 7 Jun 1997 05:32:11 -0700 (PDT) Received: from news1.gtn.com (news1.gtn.com [192.109.159.3]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id FAA15472; Sat, 7 Jun 1997 05:32:06 -0700 (PDT) Received: (from uucp@localhost) by news1.gtn.com (8.7.2/8.7.2) with UUCP id OAA08145; Sat, 7 Jun 1997 14:30:14 +0200 (MET DST) Received: (from andreas@localhost) by klemm.gtn.com (8.8.5/8.8.5) id OAA04862; Sat, 7 Jun 1997 14:17:38 +0200 (CEST) Message-ID: <19970607141738.32354@klemm.gtn.com> Date: Sat, 7 Jun 1997 14:17:38 +0200 From: Andreas Klemm To: "Andrey A. Chernov" Cc: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3804 References: <199706071139.EAA25869@freefall.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Mailer: Mutt 0.75 In-Reply-To: <199706071139.EAA25869@freefall.freebsd.org>; from Andrey A. Chernov on Sat, Jun 07, 1997 at 04:39:17AM -0700 X-Disclaimer: A free society is one where it is safe to be unpopular X-Operating-System: FreeBSD 3.0-CURRENT SMP Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jun 07, 1997 at 04:39:17AM -0700, Andrey A. Chernov wrote: > Synopsis: apache overwrites existing local config files during installation > > State-Changed-From-To: open-closed > State-Changed-By: ache > State-Changed-When: Ó 7 ÉÀÎ 1997 04:36:54 PDT > State-Changed-Why: > Misreported PR. Apache install target NOT overwrites config files. > Check what actually happens in your system and re-roll another > PR if another reaso will be found. Andrey, would have been very nice not to close this PR so quickly indicating, that you take my observation as a "low budget production" *sigh* But after investigating the real cause for this behaviour I partly understand why you did so ... ;-) Ok, the ports Makefile recognizes, that the config files will be installed with the trailing "-dist", if there are config files in the /usr/local/etc/apache directory. The evil thing is, that the local config files will be wiped out by a package delete operation, because the PLIST file contains etc/apache/httpd.conf etc/apache/srm.conf etc/apache/access.conf etc/apache/mime.types The PLIST file should contain etc/apache/httpd.conf-dist etc/apache/srm.conf-dist etc/apache/access.conf-dist etc/apache/mime.types-dist Then you could cleanly remove an apache version using pkg_install without loosing your local configuration and reinstall a newer version. But if you'd do so, another problem arises ... building packages. A first time apache installation wouldn't create the files etc/apache/httpd.conf-dist etc/apache/srm.conf-dist etc/apache/access.conf-dist etc/apache/mime.types-dist because the "extra intelligence" in the ports Makefile. And an apache tarball creatiion would probably fail because of the missing files. I'd vote for the following: Make the Makefile simpler and always install the files etc/apache/httpd.conf-dist etc/apache/srm.conf-dist etc/apache/access.conf-dist etc/apache/mime.types-dist Then (if you like) create missing config files by copying them from the -dist files. Then change PLIST to contain the files with the trailing -dist. Then everything would work as expected ! -- Andreas Klemm | klemm.gtn.com - powered by Symmetric MultiProcessor FreeBSD http://www.freebsd.org/~fsmp/SMP/SMP.html http://www.freebsd.org/~fsmp/SMP/benches.html From owner-freebsd-ports Sat Jun 7 06:56:42 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA18095 for ports-outgoing; Sat, 7 Jun 1997 06:56:42 -0700 (PDT) Received: from smtp1.ts.kiev.ua (viking.ts.kiev.ua [193.124.229.195]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA18089 for ; Sat, 7 Jun 1997 06:56:36 -0700 (PDT) Received: from aviion.ts.kiev.ua by smtp1.ts.kiev.ua with SMTP id QAA06751; (8.8.3/zah/2.1) Sat, 7 Jun 1997 16:59:19 +0300 (EET DST) Received: from nbki.ipri.kiev.ua by aviion.ts.kiev.ua with ESMTP id OAA12248; (8.6.11/zah/2.1) Sat, 7 Jun 1997 14:47:10 GMT Received: from cki.ipri.kiev.ua by nbki.ipri.kiev.ua with ESMTP id QAA03300; (8.6.9/zah/1.1) Sat, 7 Jun 1997 16:16:47 +0100 Received: from 194.44.146.14 (mac.ipri.kiev.ua [194.44.146.14]) by cki.ipri.kiev.ua (8.7.6/8.7.3) with SMTP id QAA07004; Sat, 7 Jun 1997 16:11:25 +0300 (EET DST) Message-ID: <3399503C.72ED@cki.ipri.kiev.ua> Date: Sat, 07 Jun 1997 15:12:38 +0300 From: Ruslan Shevchenko Reply-To: rssh@cki.ipri.kiev.ua Organization: IPRI X-Mailer: Mozilla 3.01Gold (Macintosh; I; 68K) MIME-Version: 1.0 To: Satoshi Asami CC: freebsd-ports@freebsd.org Subject: Re: ports/3757 References: <199706060246.TAA29551@silvia.HIP.Berkeley.EDU> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Satoshi Asami wrote: > > Now about the other half: > > * And about general port structure: > * may be we must have LINKS future: i.e. allow ports to > * be not well-ordered by depends (in algebraick sense), and run > * from crom stuff, which see: if new ports adeed ? --- may be linked > * from existings ports and so on. > * > * Examples, way we need in this: > * > * 1. TeX styles, (we must link it in texfmt directory, and, > * in case teTeX rerun texhush) > * 2. .el files (when adding emacs/xemacs) > * > * May be we must create some stuff, as windows registry, which > * holds the name of actions and variable. > * (And allow read envirowment variables to shell during boot) > * > * P.S. I cc:-ed his to freebsd-ports, to stimulate discussion about > * this. > > Sorry, I have no idea what you are talking about here. ;) > > Satoshi 1. Ports depends one from one. In general port X depend from port Y ==> X is not valid without Y. But exists many cases, in which port X particulary depending from Y. It means, that some subparts of X is not valid without Y. for example: simpack particulary depend from tk4.{1,2} (as it have sdsmt) noweb particulary depend from teTeX or tex-3.1415 (as it have noweb.sty: LaTeX style) gnats particulary depend from emacs/xemacs (as he have send-pr.el) I want introduse that: *ports X linkable with port Y, if X have additional feautures, which work if Y is installed* I want to have such ports system, which allow install X, than install Y. How to do it: let we have structure, such as windows registry, wher we holds "port-lincable" ports and actions. Example: TeX CONCEPT : STYLE_DIRECTORY ACTIONS : LINK_STYLE = ln $1 $STYLEDIRECTORY teTEX CONCEPT : STYLE_DIRECTORY=/usr/ports/teTeX/tex/texfmts SHELL_VARIABLES: TETEXROOT=/usr/ports/teTeX. ACTIONS : LINK_STYLE=action(TEX,LINK_STILE);tetexhash tex-3.14.25 ......... in teTeX port MAKEFILE: or may be in teTeX/pkg/ports-registry PORTS_REGISTRY_TOP_KEY=TeX PORTS_REGISTRY_CONCEPTS="STYLE_DIRECTORY=${PREFIX}/teTeX/tex/texfmts" PORTS_REGISTRY_SHELL_VARIABLES="TETEXROOT=${PREFIX}/teTeX" PORTS_REGISTRY_ACTIONS="LINK_STYLE=action(TeX,LINK_STYLE);tetexhash" in noweb port Makefile: (or pkg/ports-registry) PORTS_REGISTRY_LINK_DEPEND="action(TEX,LINK_STYLE) ${PREFIX}/noweb.sty" And in /etc/daily we can run programm, which see: if new ports added ? if they have ACTIONS ? if we have ports with ACTIONS_LINK_DEPEND from it ? do this actions. 2. During boot, we can read shell variables from ports-registry to initial shell. (Many ports want to have it's own variables.) In principle, I can start to write such application, which can work independed from other system code. From owner-freebsd-ports Sat Jun 7 07:08:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA18748 for ports-outgoing; Sat, 7 Jun 1997 07:08:31 -0700 (PDT) Received: from lsd.relcom.eu.net (lsd.relcom.eu.net [193.124.23.23]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA18743 for ; Sat, 7 Jun 1997 07:08:26 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by lsd.relcom.eu.net (8.8.5/8.8.5) with SMTP id SAA07880; Sat, 7 Jun 1997 18:08:10 +0400 (MSD) Date: Sat, 7 Jun 1997 18:08:10 +0400 (MSD) From: =?KOI8-R?B?4c7E0sXKIP7F0s7P1w==?= X-Sender: ache@lsd.relcom.eu.net To: Andreas Klemm cc: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3804 In-Reply-To: <19970607141738.32354@klemm.gtn.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, 7 Jun 1997, Andreas Klemm wrote: > I'd vote for the following: > > Make the Makefile simpler and always install the files > etc/apache/httpd.conf-dist > etc/apache/srm.conf-dist > etc/apache/access.conf-dist > etc/apache/mime.types-dist > > Then (if you like) create missing config files by copying > them from the -dist files. > > Then change PLIST to contain the files with the trailing -dist. > > Then everything would work as expected ! Ok, I'll do it. -- Andrey A. Chernov http://www.nagual.pp.ru/~ache/ From owner-freebsd-ports Sat Jun 7 09:18:33 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA23525 for ports-outgoing; Sat, 7 Jun 1997 09:18:33 -0700 (PDT) Received: from news1.gtn.com (news1.gtn.com [192.109.159.3]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA23519 for ; Sat, 7 Jun 1997 09:18:31 -0700 (PDT) Received: (from uucp@localhost) by news1.gtn.com (8.7.2/8.7.2) with UUCP id SAA00704; Sat, 7 Jun 1997 18:15:07 +0200 (MET DST) Received: (from andreas@localhost) by klemm.gtn.com (8.8.5/8.8.5) id RAA16286; Sat, 7 Jun 1997 17:28:39 +0200 (CEST) Message-ID: <19970607172838.34987@klemm.gtn.com> Date: Sat, 7 Jun 1997 17:28:38 +0200 From: Andreas Klemm To: =?iso-8859-1?Q?=E1=CE=C4=D2=C5=CA_=FE=C5=D2=CE=CF=D7?= Cc: freebsd-ports@FreeBSD.ORG Subject: Re: ports/3804 References: <19970607141738.32354@klemm.gtn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Mailer: Mutt 0.75 In-Reply-To: =?iso-8859-1?Q?=3CPine=2EBSF=2E3=2E96=2E970607180736=2E7834C-100000=40ls?= =?iso-8859-1?Q?d=2Erelcom=2Eeu=2Enet=3E=3B_from_=E1=CE=C4=D2=C5=CA_=FE?= =?iso-8859-1?Q?=C5=D2=CE=CF=D7_on_Sat=2C_Jun_07=2C_1997_at_06=3A08=3A10P?= =?iso-8859-1?Q?M_+0400?= X-Disclaimer: A free society is one where it is safe to be unpopular X-Operating-System: FreeBSD 3.0-CURRENT SMP Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sat, Jun 07, 1997 at 06:08:10PM +0400, áÎÄÒÅÊ þÅÒÎÏ× wrote: > Ok, I'll do it. Thanks ! -- Andreas Klemm | klemm.gtn.com - powered by Symmetric MultiProcessor FreeBSD http://www.freebsd.org/~fsmp/SMP/SMP.html http://www.freebsd.org/~fsmp/SMP/benches.html From owner-freebsd-ports Sat Jun 7 09:33:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA24323 for ports-outgoing; Sat, 7 Jun 1997 09:33:14 -0700 (PDT) Received: from mexico.brainstorm.eu.org (root@mexico.brainstorm.fr [193.56.58.253]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA24318 for ; Sat, 7 Jun 1997 09:33:11 -0700 (PDT) Received: from brasil.brainstorm.eu.org (brasil.brainstorm.fr [193.56.58.33]) by mexico.brainstorm.eu.org (8.8.4/8.8.4) with ESMTP id SAA31781 for ; Sat, 7 Jun 1997 18:33:04 +0200 Received: (from uucp@localhost) by brasil.brainstorm.eu.org (8.8.4/8.6.12) with UUCP id SAA04685 for ports@FreeBSD.ORG; Sat, 7 Jun 1997 18:32:47 +0200 Received: (from roberto@localhost) by keltia.freenix.fr (8.8.5/keltia-uucp-2.9) id JAA05377; Sat, 7 Jun 1997 09:56:42 +0200 (CEST) Message-ID: <19970607095642.13008@keltia.freenix.fr> Date: Sat, 7 Jun 1997 09:56:42 +0200 From: Ollivier Robert To: ports@FreeBSD.ORG Subject: Re: ports/comms/hylafax References: <199706060125.SAA29193@silvia.HIP.Berkeley.EDU> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.67 In-Reply-To: ; from Tom Samplonius on Thu, Jun 05, 1997 at 10:00:19PM -0700 X-Operating-System: FreeBSD 3.0-CURRENT ctm#3332 AMD-K6 MMX @ 208 MHz Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk According to Tom Samplonius: > I dunno. I don't like ncftp2 very much. I've never been able to pipe Agreed. There are many things ncftp2 can't do where ncftp1 did it (like accepting FTP URL in interactive mode, it works only from the command line). > files into a process with it. It always tries to be smart, and convert my > get into a mget if I do something like: > > get floppies.tar "| tar xf -" The syntax has changed (not foe the better IMO)... From memory, it is something like that: get -z "| tar xf -" floppies.tar There is one thing ncftp2 does and ncftp1 doesn't: reget :-( -- Ollivier ROBERT -=- FreeBSD: There are no limits -=- roberto@keltia.freenix.fr FreeBSD keltia.freenix.fr 3.0-CURRENT #17: Sat May 31 18:55:45 CEST 1997 From owner-freebsd-ports Sat Jun 7 09:59:33 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id JAA25600 for ports-outgoing; Sat, 7 Jun 1997 09:59:33 -0700 (PDT) Received: from mail.scsn.net (scsn.net [206.25.246.12]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id JAA25595 for ; Sat, 7 Jun 1997 09:59:25 -0700 (PDT) Received: from cola84.scsn.net ([206.25.247.84]) by mail.scsn.net (Post.Office MTA v3.1 release PO203a ID# 0-32322U5000L100S10000) with ESMTP id AAA229; Sat, 7 Jun 1997 12:52:18 -0400 Received: (from root@localhost) by cola84.scsn.net (8.8.5/8.8.5) id MAA01191; Sat, 7 Jun 1997 12:59:11 -0400 (EDT) Message-ID: <19970607125910.16741@scsn.net> Date: Sat, 7 Jun 1997 12:59:10 -0400 From: "Donald J. Maddox" To: ports@FreeBSD.org Cc: vanilla@minje.com.tw Subject: Inconsistency in VTCL Port Reply-To: dmaddox@scsn.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 Sender: owner-ports@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk rhiannon$ cat /usr/ports/devel/vtcl/pkg/DESCR Visual Tcl is a freely-available, high-quality application development environment for UNIX, Window$ and Macintosh platforms. Visual Tcl is written entirely in Tcl/Tk. No extensions. Tcl7.5 and Tk4.1 or later are required. - Vanilla vanilla@minje.com.tw rhiannon$ grep BUILD_DEPENDS /usr/ports/devel/vtcl/Makefile BUILD_DEPENDS= wish4.2:${PORTSDIR}/x11/tk42 As you can see, the DESCR for this package states that it requires tcl7.5 and tk4.1; however, the _package_ requires tk4.2. I am sure that I am not the only one that has a problem with having multiple versions of TCL and TK... If this port only requires tk4.1, then it should build as long as _at least_ tk41 is installed, no? Is there a better way to specify the dependencies so that it will build as long as tk4.1 (or higher) is installed? Or is the DESCR just wrong? From owner-freebsd-ports Sat Jun 7 10:03:14 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA25747 for ports-outgoing; Sat, 7 Jun 1997 10:03:14 -0700 (PDT) Received: from florence.pavilion.net (mailrelay1.pavilion.net [194.242.128.25]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA25742 for ; Sat, 7 Jun 1997 10:03:03 -0700 (PDT) Received: (from joe@localhost) by florence.pavilion.net (8.8.5/8.8.5) id SAA12110; Sat, 7 Jun 1997 18:02:32 +0100 (BST) Message-ID: <19970607180231.61290@pavilion.net> Date: Sat, 7 Jun 1997 18:02:31 +0100 From: Josef Karthauser To: freebsd-ports@freebsd.org Subject: port of ripe's extended whois client. Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, I've put a port of RIPE's (European IP registry) version of whois into /pub/FreeBSD/incoming/ripetools.tgz Would someone mind having a look at it please? Cheers, Joe -- Josef Karthauser Technical Manager Email: joe@pavilion.net Pavilion Internet plc. [Tel: +44 1273 607072 Fax: +44 1273 607073] From owner-freebsd-ports Sat Jun 7 10:06:08 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA26002 for ports-outgoing; Sat, 7 Jun 1997 10:06:08 -0700 (PDT) Received: from florence.pavilion.net (mailrelay1.pavilion.net [194.242.128.25]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA25995 for ; Sat, 7 Jun 1997 10:06:04 -0700 (PDT) Received: (from joe@localhost) by florence.pavilion.net (8.8.5/8.8.5) id SAA12222; Sat, 7 Jun 1997 18:05:30 +0100 (BST) Message-ID: <19970607180530.05468@pavilion.net> Date: Sat, 7 Jun 1997 18:05:30 +0100 From: Josef Karthauser To: ports@freebsd.org Subject: fetching tarballs. Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.74 Sender: owner-ports@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hiya, I've got a suggestion about the fetch part of the ports mechanism. It would be useful if it was possible to configure the fetch to be passive (-P) if required. All of my machines are behind a fire wall and I can't therefore get the ports mechanism to work fully automatically. Can we add a switch (probably in /etc/make.conf) somewhere please? Cheers, Joe -- Josef Karthauser Technical Manager Email: joe@pavilion.net Pavilion Internet plc. [Tel: +44 1273 607072 Fax: +44 1273 607073] From owner-freebsd-ports Sat Jun 7 10:10:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA26435 for ports-outgoing; Sat, 7 Jun 1997 10:10:04 -0700 (PDT) Received: (from gnats@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA26415; Sat, 7 Jun 1997 10:10:02 -0700 (PDT) Resent-Date: Sat, 7 Jun 1997 10:10:02 -0700 (PDT) Resent-Message-Id: <199706071710.KAA26415@hub.freebsd.org> Resent-From: gnats (GNATS Management) Resent-To: freebsd-ports Resent-Reply-To: FreeBSD-gnats@FreeBSD.ORG, vanilla@MinJe.com.TW Received: from MinJe.com.TW (vanilla@ns.MinJe.com.TW [210.66.86.1]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA26268 for ; Sat, 7 Jun 1997 10:08:21 -0700 (PDT) Received: (from vanilla@localhost) by MinJe.com.TW (8.8.5/Vanilla) id BAA06022; Sun, 8 Jun 1997 01:05:27 +0800 (CST) Message-Id: <199706071705.BAA06022@MinJe.com.TW> Date: Sun, 8 Jun 1997 01:05:27 +0800 (CST) From: vanilla@MinJe.com.TW Reply-To: vanilla@MinJe.com.TW To: FreeBSD-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: 3.2 Subject: ports/3806: update s3mod to 1.09 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >Number: 3806 >Category: ports >Synopsis: update s3mod to 1.09 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-ports >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Sat Jun 7 10:10:01 PDT 1997 >Last-Modified: >Originator: Vanill I. Shu >Organization: Cray running FreeBSD >Release: FreeBSD 3.0-CURRENT i386 >Environment: >Description: update s3mod to 1.09 this is latest version i can found. >How-To-Repeat: >Fix: diff -ru s3mod.orig/Makefile s3mod/Makefile --- s3mod.orig/Makefile Sat Apr 5 22:55:38 1997 +++ s3mod/Makefile Sun Jun 8 00:45:36 1997 @@ -1,20 +1,26 @@ # New ports collection makefile for: s3mod -# Version required: 1.08A -# Date created: 9 March 1995 -# Whom: ugen +# Version required: 1.09 +# Date created: 7 June 1997 +# Whom: Vanilla I. Shu # # $Id: Makefile,v 1.5 1996/11/18 10:34:43 asami Exp $ # -DISTNAME= s3mod-v1.08A -PKGNAME= s3mod-1.08a +DISTNAME= s3mod-v1.09 +PKGNAME= s3mod-1.09 CATEGORIES= audio MASTER_SITES= ${MASTER_SITE_SUNSITE} MASTER_SITE_SUBDIR= apps/sound/players -DISTFILES= s3mod-v1.08A.tar.gz MAINTAINER= ugen@FreeBSD.org -INSTALL_TARGET= install +ALL_TARGET= freebsd +INSTALL_TARGET= install +pre-patch: + @ ${CP} ${WRKSRC}/DspDrivers/linux_dsp.c ${WRKSRC}/dsp.c + +post-install: + @strip ${PREFIX}/bin/s3mod + .include diff -ru s3mod.orig/files/md5 s3mod/files/md5 --- s3mod.orig/files/md5 Sat Apr 5 22:55:38 1997 +++ s3mod/files/md5 Sun Jun 8 00:26:05 1997 @@ -1 +1 @@ -MD5 (s3mod-v1.08A.tar.gz) = d8082a70e0ca34d3e9a7961ec3c6f4f0 +MD5 (s3mod-v1.09.tar.gz) = 28b124c320cd33a0c6aa66611fedd41b diff -ru s3mod.orig/patches/patch-aa s3mod/patches/patch-aa --- s3mod.orig/patches/patch-aa Sat Apr 5 22:55:38 1997 +++ s3mod/patches/patch-aa Sun Jun 8 01:04:25 1997 @@ -1,351 +1,174 @@ -diff -cr s3mod-v1.08A/Makefile s3mod-v1.08A.port/Makefile -*** ./Makefile Mon Mar 7 05:54:59 1994 ---- ..port/Makefile Thu Mar 9 13:02:33 1995 -*************** -*** 30,36 **** - # Uncomment these for Linux (DSP and GUS support) - # - COPTS = -O2 -! DEFINES = -DLINUX -DGUS - INCLUDES = - LIBS = - LIBDIR = ---- 30,36 ---- - # Uncomment these for Linux (DSP and GUS support) - # - COPTS = -O2 -! DEFINES = -DGUS - INCLUDES = - LIBS = - LIBDIR = -*************** -*** 55,60 **** ---- 55,63 ---- - - dep: - makedepend $(CFLAGS) $(LFLAGS) $(CFILES) -+ -+ install: -+ install -m 555 s3mod /usr/local/bin - - # DO NOT DELETE THIS LINE -- make depend depends on it. - -diff -cr s3mod-v1.08A/gus.c s3mod-v1.08A.port/gus.c -*** ./gus.c Mon Mar 7 05:19:56 1994 ---- ..port/gus.c Thu Mar 9 12:56:50 1995 -*************** -*** 20,27 **** - /* See the associated README file for Thanks */ - /***************************************************/ - -! #include -! #include - #include - #include "gus.h" - #include "mod.h" ---- 20,27 ---- - /* See the associated README file for Thanks */ - /***************************************************/ - -! #include -! #include - #include - #include "gus.h" - #include "mod.h" -diff -cr s3mod-v1.08A/main.c s3mod-v1.08A.port/main.c -*** ./main.c Mon Mar 7 05:56:44 1994 ---- ..port/main.c Thu Mar 9 12:59:57 1995 -*************** -*** 38,47 **** - * Portability conditions - */ - -! #ifdef LINUX -! #include -! #include -! #endif /* LINUX */ - #ifdef GUS - #include "gus.h" - #endif /* GUS */ ---- 38,47 ---- - * Portability conditions - */ - -! #ifdef __FreeBSD__ -! #include -! #include -! #endif /* __FreeBSD__ */ - #ifdef GUS - #include "gus.h" - #endif /* GUS */ -*************** -*** 81,96 **** - printf("For information email (s3mod@uiuc.edu).\n"); - printf("s3mod [-sbfqnl] [sampling frequency] filename\n"); - printf(" -s stereo\n"); -! #ifdef LINUX - printf(" -b 16 bit samples\n"); -! #endif /* ?LINUX */ - printf(" -f set frequency\n"); - printf(" -q quiet (don't print anything)\n"); - printf(" -n don't loop\n"); - printf(" -l loud mode (shift voices louder)\n"); -! #ifdef LINUX - printf(" -g do NOT use GUS native mode\n"); -! #endif /* ?LINUX */ - printf(" -p PAL speed adjustment (145bpm start)\n"); - printf("s3mod -sbf 44100 foobar.mod\n"); - printf(" plays in stereo, 16 bits, 44.1 kHz\n\n"); ---- 81,96 ---- - printf("For information email (s3mod@uiuc.edu).\n"); - printf("s3mod [-sbfqnl] [sampling frequency] filename\n"); - printf(" -s stereo\n"); -! #ifdef __FreeBSD__ - printf(" -b 16 bit samples\n"); -! #endif /* ?__FreeBSD__ */ - printf(" -f set frequency\n"); - printf(" -q quiet (don't print anything)\n"); - printf(" -n don't loop\n"); - printf(" -l loud mode (shift voices louder)\n"); -! #ifdef __FreeBSD__ - printf(" -g do NOT use GUS native mode\n"); -! #endif /* ?__FreeBSD__ */ - printf(" -p PAL speed adjustment (145bpm start)\n"); - printf("s3mod -sbf 44100 foobar.mod\n"); - printf(" plays in stereo, 16 bits, 44.1 kHz\n\n"); -*************** -*** 98,104 **** - printf("4,6,or 8 track MODs.\n\n"); - #ifdef DEC - printf("NOTE: DEC AF support is in it's ALPHA stages\n\n"); -! #endif /* ?LINUX */ - exit(1); - } - ---- 98,104 ---- - printf("4,6,or 8 track MODs.\n\n"); - #ifdef DEC - printf("NOTE: DEC AF support is in it's ALPHA stages\n\n"); -! #endif /* ?__FreeBSD__ */ - exit(1); - } - -*************** -*** 110,116 **** - { - int found_gus=0; - -! #ifdef LINUX - #ifdef GUS - if (use_gus) - { ---- 110,116 ---- - { - int found_gus=0; - -! #ifdef __FreeBSD__ - #ifdef GUS - if (use_gus) - { -*************** -*** 124,130 **** - #else /* GUS */ - get_dsp_device(); - #endif /* GUS */ -! #endif /* LINUX */ - - #ifdef SUN - get_sun_device(); ---- 124,130 ---- - #else /* GUS */ - get_dsp_device(); - #endif /* GUS */ -! #endif /* __FreeBSD__ */ - - #ifdef SUN - get_sun_device(); -*************** -*** 231,237 **** - #endif /* ?SUN */ - - -! #ifdef LINUX - int get_dsp_device(void) - { - uint32 j; ---- 231,237 ---- - #endif /* ?SUN */ - - -! #ifdef __FreeBSD__ - int get_dsp_device(void) - { - uint32 j; -*************** -*** 279,285 **** - audio_curptr = audio_start_buffer; - - } -! #endif /* ?LINUX */ - - - ---- 279,285 ---- - audio_curptr = audio_start_buffer; - - } -! #endif /* ?__FreeBSD__ */ - - - -diff -cr s3mod-v1.08A/mix.c s3mod-v1.08A.port/mix.c -*** ./mix.c Mon Mar 7 05:19:25 1994 ---- ..port/mix.c Thu Mar 9 12:56:16 1995 -*************** -*** 27,39 **** - #include - #include "mod.h" - -! #ifdef LINUX -! #include -! #include -! #endif /* ?LINUX */ - - #ifdef GUS -! #include - #include "gus.h" - #endif /* ?GUS */ - ---- 27,39 ---- - #include - #include "mod.h" - -! #ifdef __FreeBSD__ -! #include -! #include -! #endif /* ?__FreeBSD__ */ - - #ifdef GUS -! #include - #include "gus.h" - #endif /* ?GUS */ - -diff -cr s3mod-v1.08A/mod.c s3mod-v1.08A.port/mod.c -*** ./mod.c Mon Mar 7 05:19:01 1994 ---- ..port/mod.c Thu Mar 9 12:53:53 1995 -*************** -*** 30,42 **** - #include "mod.h" - #include "main.h" - -! #ifdef LINUX -! #include -! #include -! #endif /* ?LINUX */ - - #ifdef GUS -! #include - #include "gus.h" - #endif /* GUS */ - ---- 30,42 ---- - #include "mod.h" - #include "main.h" - -! #ifdef __FreeBSD__ -! #include -! #include -! #endif /* ?__FreeBSD__ */ - - #ifdef GUS -! #include - #include "gus.h" - #endif /* GUS */ - -diff -cr s3mod-v1.08A/mod.h s3mod-v1.08A.port/mod.h -*** ./mod.h Mon Mar 7 05:21:18 1994 ---- ..port/mod.h Thu Mar 9 12:53:09 1995 -*************** -*** 22,28 **** - #define __BYTE_ORDER 4321 - #endif - -! #ifdef linux - #define BIT_32 - #undef NEAR_FAR_PTR - #endif ---- 22,28 ---- - #define __BYTE_ORDER 4321 - #endif - -! #ifdef __FreeBSD__ - #define BIT_32 - #undef NEAR_FAR_PTR - #endif -diff -cr s3mod-v1.08A/play.c s3mod-v1.08A.port/play.c -*** ./play.c Mon Mar 7 05:18:08 1994 ---- ..port/play.c Thu Mar 9 12:55:46 1995 -*************** -*** 31,43 **** - - #include "main.h" - -! #ifdef LINUX -! #include -! #include -! #endif /* ?LINUX */ - - #ifdef GUS -! #include - #include "gus.h" - #endif /* ?GUS */ - ---- 31,43 ---- - - #include "main.h" - -! #ifdef __FreeBSD__ -! #include -! #include -! #endif /* ?__FreeBSD__ */ - - #ifdef GUS -! #include - #include "gus.h" - #endif /* ?GUS */ - -diff -cr s3mod-v1.08A/s3m.c s3mod-v1.08A.port/s3m.c -*** ./s3m.c Mon Mar 7 05:18:37 1994 ---- ..port/s3m.c Thu Mar 9 12:55:01 1995 -*************** -*** 22,35 **** - - #include - #include - - #include - - #include "mod.h" - -! #ifdef LINUX -! #include -! #include - #endif - - #ifdef GUS ---- 22,36 ---- - - #include - #include -+ #include - - #include - - #include "mod.h" - -! #ifdef __FreeBSD__ -! #include -! #include - #endif - - #ifdef GUS +--- config.h.orig Sun Jun 8 00:11:14 1997 ++++ config.h Sun Jun 8 00:12:37 1997 +@@ -64,6 +64,14 @@ + #define GUS + #endif /* GUS */ + ++#elif defined(__FreeBSD__) ++#define BIT_32 ++#undef NEAR_FAR_PTR ++#define DSP ++#ifndef GUS ++#define GUS ++#endif /* GUS */ ++ + #elif defined(MSDOS) + #define NEAR_FAR_PTR + #define DSP +--- dsp.c.orig Sat Oct 21 14:40:29 1995 ++++ dsp.c Sun Jun 8 00:21:50 1997 +@@ -22,14 +22,14 @@ + * linux_dsp.c - Support for the Linux DSP driver from the Voxware(C) Drivers. + */ + +-#ifdef LINUX ++#ifdef __FreeBSD__ + #include "config.h" + #include + #include + #include + #include +-#include +-#include ++#include ++#include + #include "main.h" + #include "dsp.h" + +@@ -93,5 +93,5 @@ + return; + } + +-#endif /* ?LINUX */ ++#endif /* ?__FreeBSD__ */ + +--- gus.c.orig Sun Jun 8 00:05:28 1997 ++++ gus.c Sun Jun 8 00:05:51 1997 +@@ -25,8 +25,8 @@ + + #ifdef GUS + +-#include +-#include ++#include ++#include + #include + #include "gus.h" + #include "mod.h" +--- main.c.orig Sun Jun 8 00:05:59 1997 ++++ main.c Sun Jun 8 00:10:46 1997 +@@ -56,6 +56,10 @@ + printf(" Linux Support by Daniel Marks \n"); + printf(" GUS Support by David Jeske (jeske@uiuc.edu)\n"); + #endif /* LINUX */ ++#ifdef __FreeBSD__ ++ printf(" FreeBSD Support by Vanilla I. Shu \n"); ++ printf(" GUS Support by David Jeske (jeske@uiuc.edu\n"); ++#endif /* __FreeBSD__ */ + #if defined(__sgi) + printf(" SGI Support by Mike Muuss (Mike@arl.mil)\n\n"); + #endif /* __sgi */ +@@ -69,6 +73,9 @@ + #ifdef LINUX + printf(" -b 16 bit samples\n"); + #endif /* ?LINUX */ ++#ifdef __FreeBSD__ ++ printf(" -b 16 bit samples\n"); ++#endif /* __FreeBSD__ */ + printf(" -f set frequency\n"); + printf(" -q quiet (don't print anything)\n"); + printf(" -n don't loop\n"); +@@ -76,6 +83,9 @@ + #ifdef LINUX + printf(" -g do NOT use GUS native mode\n"); + #endif /* ?LINUX */ ++#ifdef __FreeBSD__ ++ printf(" -g do NOT use GUS native mode\n"); ++#endif /* __FreeBSD__ */ + printf(" -p PAL speed adjustment (145bpm start)\n"); + printf("s3mod -sbf 44100 foobar.mod\n"); + printf(" plays in stereo, 16 bits, 44.1 kHz\n\n"); +--- mod.c.orig Sun Jun 8 00:12:48 1997 ++++ mod.c Sun Jun 8 00:14:30 1997 +@@ -11,7 +11,7 @@ + + + #ifdef GUS +-#include ++#include + #include "gus.h" + #endif /* GUS */ + +@@ -130,8 +130,10 @@ + /* Portamento Down */ + if ((track->period += track->port_down) > track->period_high_limit) + track->period = track->period_high_limit; +- track->pitch = track->finetune_rate / track->period; +- ++ if (track->period != 0) ++ track->pitch = track->finetune_rate / track->period; ++ else ++ track->pitch = 1; + track->playing_period = track->period; + } + +--- play.c.orig Sun Jun 8 00:15:23 1997 ++++ play.c Sun Jun 8 00:15:46 1997 +@@ -36,7 +36,7 @@ + #include "dsp.h" + + #ifdef GUS +-#include ++#include + #include "gus.h" + #endif /* GUS */ + +--- gus.h.orig Sun Jun 8 00:31:14 1997 ++++ gus.h Sun Jun 8 00:31:23 1997 +@@ -26,7 +26,7 @@ + #ifndef _GUS_H + #define _GUS_H + +-#include ++#include + + #define ERR_SEQUENCER 51 + #define ERR_NOGUS 53 +--- Makefile.orig Sun Oct 22 03:48:51 1995 ++++ Makefile Sun Jun 8 01:03:46 1997 +@@ -9,7 +9,6 @@ + RM = rm + LN = ln -s + +-CFLAGS = -O2 + LFLAGS = + + OBJS = mod.o s3m.o main.o play.o mix.o cmdline.o dsp.o gus.o +@@ -24,6 +23,7 @@ + @echo " make sun - SunOS/Solaris" + @echo " make sgi - SGI Irix" + @echo " make linux - Voxware DSP/GUS" ++ @echo " make freebsd - Voxware DSP/GUS" + @echo " make dec - Dec OSF/1" + @echo " make clean - remove all .o files" + @echo " make clobber - remove all .o and targets" +@@ -51,6 +51,9 @@ + $(LN) DspDrivers/linux_dsp.c dsp.c + make CC=gcc CFLAGS=-O2 DEFINES="-DLINUX -DGUS" s3mod + ++freebsd: ++ make CC=gcc CFLAGS="$(CFLAGS)" DEFINES="-DGUS" s3mod ++ + s3mod: $(OBJS) + $(CC) $(CFLAGS) -o s3mod $(OBJS) $(LFLAGS) $(LIBS) + +@@ -62,6 +65,9 @@ + + dep: + makedepend $(CFLAGS) $(LFLAGS) $(LIBS) $(CFILES) ++ ++install: ++ install -m 555 s3mod /usr/local/bin + + # DO NOT DELETE THIS LINE -- make depend depends on it. + >Audit-Trail: >Unformatted: From owner-freebsd-ports Sat Jun 7 12:25:41 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA01902 for ports-outgoing; Sat, 7 Jun 1997 12:25:41 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA01891; Sat, 7 Jun 1997 12:25:29 -0700 (PDT) From: Masafumi NAKANE Received: (from max@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id MAA27515; Sat, 7 Jun 1997 12:24:59 -0700 (PDT) Date: Sat, 7 Jun 1997 12:24:59 -0700 (PDT) Message-Id: <199706071924.MAA27515@freefall.freebsd.org> To: Nakai@Mlab.t.u-tokyo.ac.jp, max@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3785 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Fixed port: ines-0.6 State-Changed-From-To: open-closed State-Changed-By: max State-Changed-When: Sat Jun 7 12:24:18 PDT 1997 State-Changed-Why: The update is done, with some modification. From owner-freebsd-ports Sat Jun 7 12:49:09 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id MAA02815 for ports-outgoing; Sat, 7 Jun 1997 12:49:09 -0700 (PDT) Received: from freefall.freebsd.org (freefall.cdrom.com [204.216.27.21]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id MAA02807; Sat, 7 Jun 1997 12:49:02 -0700 (PDT) From: Masafumi NAKANE Received: (from max@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id MAA27701; Sat, 7 Jun 1997 12:48:32 -0700 (PDT) Date: Sat, 7 Jun 1997 12:48:32 -0700 (PDT) Message-Id: <199706071948.MAA27701@freefall.freebsd.org> To: Nakai@Mlab.t.u-tokyo.ac.jp, max@FreeBSD.ORG, freebsd-ports@FreeBSD.ORG Subject: Re: ports/3774 Sender: owner-ports@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Synopsis: Fixed port: xmascot-2.5p2 State-Changed-From-To: open-closed State-Changed-By: max State-Changed-When: Sat Jun 7 12:47:49 PDT 1997 State-Changed-Why: Submitted update is integrated with some modification.