Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 15 Jun 2000 12:29:59 +0200 (CEST)
From:      Marc van Woerkom <van.woerkom@netcologne.de>
Cc:        current@FreeBSD.ORG
Subject:   Re: HEADS UP!: config changes...
Message-ID:  <200006151029.MAA09551@oranje.my.domain>
In-Reply-To: <20000613231829.2F4BF1CD7@overcee.netplex.com.au> (message from Peter Wemm on Tue, 13 Jun 2000 16:18:29 -0700)
References:   <20000613231829.2F4BF1CD7@overcee.netplex.com.au>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi!

I was able to build and boot, starting from a February -CURRENT but there 
are some oddities.

1. I had to disable linux emulation, as it caused system hangup
   Yes I followed the hint on rebranding from src/UPDATING

2. My system seems to have a problem with fsck
   I had to use the old February kernel to boot and fsck with it,
   after the new kernel driven system crashed with the fs inconsistent 

3. in the boot loader I miss the list of commands, 
   ? (i hope this was the command) just yields a number

4. I thought I put just the sym driver in the kernel, why do I
   see ncr? (see next item)

5. Here are the dmesg differences between the February and the new
   kernel. Could you explain the unassigned resources messages
   to me? 

    +Setting atkbd 0 at to atkbdc (string)
    +Setting atkbd 0 irq to 1 (int)
    +Setting atkbdc 0 at to isa (string)
    +Setting atkbdc 0 port to 96 (int)
    +Setting fd 0 at to fdc0 (string)
    +Setting fd 0 drive to 0 (int)
    +Setting fdc 0 at to isa (string)
    +Setting fdc 0 drq to 2 (int)
    +Setting fdc 0 irq to 6 (int)
    +Setting fdc 0 port to 1008 (int)
    +Setting isic 0 at to isa (string)
    +Setting isic 0 flags to 3 (int)
    +Setting isic 0 irq to 5 (int)
    +Setting isic 0 port to 3456 (int)
    +Setting joy 0 at to isa (string)
    +Setting joy 0 port to 513 (int)
    +Setting lpt 0 at to ppbus (string)
    +Setting npx 0 at to nexus (string)
    +Setting npx 0 flags to 0 (int)
    +Setting npx 0 irq to 13 (int)
    +Setting npx 0 port to 240 (int)
    +Setting ppc 0 at to isa (string)
    +Setting ppc 0 irq to 7 (int)
    +Setting sc 0 at to isa (string)
    +Setting sio 0 at to isa (string)
    +Setting sio 0 flags to 16 (int)
    +Setting sio 0 irq to 4 (int)
    +Setting sio 0 port to 1016 (int)
    +Setting vga 0 at to isa (string)
    +FreeBSD 5.0-CURRENT #15: Thu Jun 15 00:25:51 CEST 2000
	 marc@oranje.my.domain:/usr/src/sys/compile/ORANJE
     Timecounter "i8254"  frequency 1193182 Hz
    -Timecounter "TSC"  frequency 300684682 Hz
    -CPU: AMD-K6tm w/ multimedia extensions (300.68-MHz 586-class CPU)
    +Timecounter "TSC"  frequency 300685025 Hz
    +CPU: AMD-K6tm w/ multimedia extensions (300.69-MHz 586-class CPU)
       Origin = "AuthenticAMD"  Id = 0x570  Stepping = 0
       Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
       AMD Features=0x400<<b10>>
     real memory  = 201326592 (196608K bytes)
    -avail memory = 191733760 (187240K bytes)
    -Preloaded elf kernel "kernel" at 0xc030d000.
    -VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc02b3602 (1000022)
    +avail memory = 192716800 (188200K bytes)
    +Preloaded elf kernel "kernel" at 0xc032c000.
    +VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc02cd122 (1000022)
     VESA: NVidia
     npx0: <math processor> on motherboard
     npx0: INT 16 interface
     pcib0: <Host to PCI bridge> on motherboard
     pci0: <PCI bus> on pcib0
    +pci0: <Host to PCI bridge (vendor=1039 device=5597)> at 0.0
     isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
     isa0: <ISA bus> on isab0
     atapci0: <SiS 5591 ATA33 controller> irq 0 at device 1.1 on pci0
    @@ -25,30 +55,42 @@
     atapci1: <HighPoint HPT366 ATA66 controller> port 0x6500-0x65ff,0x6400-0x6403,0x6300-0x6307 irq 15 at device 11.0 on pci0
     ata2: at 0x6300 on atapci1
     atapci2: <HighPoint HPT366 ATA66 controller> port 0x6800-0x68ff,0x6700-0x6703,0x6600-0x6607 irq 15 at device 11.1 on pci0
    -sym0: <875> port 0x6900-0x69ff mem 0xe2000000-0xe2000fff,0xe2002000-0xe20020ff irq 11 at device 13.0 on pci0
    -sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
    +ncr0: <ncr 53c875 fast20 wide scsi> port 0x6900-0x69ff mem 0xe2000000-0xe2000fff,0xe2002000-0xe20020ff irq 11 at device 13.0 on pci0
     pcm0: <AudioPCI ES1370> port 0x6a00-0x6a3f irq 10 at device 15.0 on pci0
    -pci0: NVidia Riva TNT graphics accelerator (vendor=0x10de, dev=0x0020) at 17.0 irq 9
    -atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
    +pci0: <NVidia Riva TNT graphics accelerator> at 17.0 irq 9
    +atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
     atkbd0: <AT Keyboard> irq 1 on atkbdc0
    -vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    -sc0: <System console> on isa0
    -sc0: VGA <16 virtual consoles, flags=0x200>
     fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
     fdc0: FIFO enabled, 8 bytes threshold
     fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    -sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    -sio0: type 16550A
    -joy0 at port 0x201 on isa0
    -isic0 at port 0xd80,0x960-0x99f,0x160-0x19f,0x560-0x59f irq 5 flags 0x3 on isa0
    +isic0 at port 0xd80-0xd9f,0x980-0x99f,0x180-0x19f,0x580-0x59f irq 5 flags 0x3 on isa0
     isic0: Teles S0/16.3
    -ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    +joy0 at port 0x201 on isa0
    +ppc0: This ppc chipset does not support the extended I/O port range...no problem
    +ppc0: <Parallel port> at port 0x378-0x37b irq 7 on isa0
     ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
    -ppbus0: IEEE1284 device found /NIBBLE
    -Probing for PnP devices on ppbus0:
    -ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED PCL5,PJL
     lpt0: <Printer> on ppbus0
     lpt0: Interrupt-driven port
    +sc0: <System console> on isa0
    +sc0: VGA <16 virtual consoles, flags=0x200>
    +sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    +sio0: type 16550A
    +vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    +unknown: <PNP0000> can't assign resources
    +unknown: <PNP0200> can't assign resources
    +unknown0: <PNP0100> at port 0x40-0x43 irq 0 on isa0
    +unknown1: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
    +unknown: <PNP0303> can't assign resources
    +unknown2: <PNP0800> at port 0x61 on isa0
    +npxisa0: <Legacy ISA coprocessor support> at port 0xf0-0xff irq 13 on isa0
    +unknown3: <PNP0c01> at iomem 0xe0000-0xfffff,0-0x9ffff,0x20000000-0x203fffff,0xffee0000-0xffefffff,0xfffe0000-0xffffffff,0x100000-0xbffffff on isa0
    +unknown4: <PNP0a03> at port 0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f on isa0
    +unknown5: <PNP0c02> at port 0x6100-0x613f on isa0
    +unknown: <PNP0501> can't assign resources
    +unknown: <PNP0700> can't assign resources
    +unknown: <PNP0400> can't assign resources
    +sio1: <16550A-compatible COM port> at port 0x2f8-0x2ff irq 3 on isa0
    +sio1: type 16550A
     i4b: ISDN call control device attached
     i4bisppp: 4 ISDN SyncPPP device(s) attached
     i4bctl: ISDN system control port attached
    @@ -59,19 +101,19 @@
     ad0: 26059MB <Maxtor 92732U8> [52946/16/63] at ata2-master using UDMA66
     Waiting 8 seconds for SCSI devices to settle
     Mounting root from ufs:/dev/da0s2a
    -cd0 at sym0 bus 0 target 6 lun 0
    -cd0: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI-2 device 
    -cd0: 10.000MB/s transfers (10.000MHz, offset 15)
    -cd0: cd present [355510 x 2048 byte records]
    -da0 at sym0 bus 0 target 0 lun 0
    +cd0 at ncr0 bus 0 target 4 lun 0
    +cd0: <PIONEER DVD-ROM DVD-303 1.10> Removable CD-ROM SCSI-2 device 
    +cd0: 20.000MB/s transfers (20.000MHz, offset 8)
    +cd0: cd present [2134336 x 2048 byte records]
    +da0 at ncr0 bus 0 target 0 lun 0
     da0: <QUANTUM FIREBALL ST2.1S 0F0C> Fixed Direct Access SCSI-2 device 
     da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
     da0: 2068MB (4235629 512 byte sectors: 255H 63S/T 263C)
    -da1 at sym0 bus 0 target 1 lun 0
    +da1 at ncr0 bus 0 target 1 lun 0
     da1: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device 
     da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
     da1: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
    -da2 at sym0 bus 0 target 2 lun 0
    +da2 at ncr0 bus 0 target 2 lun 0
     da2: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device 
     da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
     da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)


Thanks for the work,
Marc


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006151029.MAA09551>