Date: Tue, 19 Feb 2002 12:58:03 +0100 From: "Petr Holub" <hopet@ics.muni.cz> To: <freebsd-stable@freebsd.org> Subject: ASUS USB floppy Message-ID: <003b01c1b93c$af970190$2603fb93@kloboucek>
next in thread | raw e-mail | index | archive | help
Hi all,
I've problems with ASUS T9400 equipped with USB floppy. When I try
to work with it I get following error (serveral examples):
bash-2.05a# mount -t msdos /dev/rda0 /mnt
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status ==
0x0
msdos: /dev/rda0: Input/output error
bash-2.05a# mount -t msdos /dev/rda0c /mnt
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status ==
0x0
msdos: /dev/rda0c: Input/output error
bash-2.05a# fdisk /dev/rda0
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status ==
0x0
fdisk: can't open device /dev/rda0
fdisk: cannot open disk /dev/rda0: Input/output error
Does anybody has some idea how to make it working? dmesg is bellow
my signature (I've some debugging in kernel so it's chatty sometimes).
BTW: I've read in man page that it should work for USB floppies
VAIO computers are equipped with.
Thanks!
Petr
================================================================
Petr Holub
CESNET z.s.p.o. Supercomputing Center Brno
Zikova 2 Institute of Compt. Science
10200 Praha, CZ Masaryk University
Czech Republic Botanicka 68a, 60200 Brno, CZ
e-mail: Petr.Holub@cesnet.cz phone: +420-5-41512213
e-mail: hopet@ics.muni.cz
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #12: Mon Jan 28 18:18:45 CET 2002
toor@kloboucek.ics.muni.cz:/usr/src/sys/compile/KLOBOUCEK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (701.59-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267296768 (261032K bytes)
avail memory = 256020480 (250020K bytes)
Preloaded elf kernel "kernel" at 0xc0428000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00f1c20
apm0: <APM BIOS> on motherboard
apm: APM BIOS version 0102
apm: Code16 0xc00f0000, Data 0xc0000400
apm: Code entry 0x00006f34, Idling CPU disabled, Management enabled
apm: CS_limit=0xffff, DS_limit=0xffff
apm: Engaged control enabled
apm: found APM BIOS v1.2, connected at v1.2
apm: Slow Idling CPU disabled
Add hook "default suspend"
Add hook "default resume"
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7800000-0xf787ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xf7000000-0xf70000ff irq 4 at device 4.0 on pci1
rl0: Ethernet address: 00:e0:18:2c:ea:6a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcic0: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 7.0 on pci1
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [speaker enable][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 7.1 on pci1
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [speaker enable][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
fwohci0: <Texas Instruments TSB43AA99> irq 11 at device 7.2 on pci1
pcilynx0: PCI bus latency was changing to 200.
fwohci0: could not map memory - trying allocation on my own
fwohci0: PCI Memory allocated: ffafc000
fwohci0: Link 1394a available S400, 1 ports.
fwohci: node 0x00000000
This host is NOT CYCLEMASTER
Attach the probed firewire I/F to fwiso0
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: MITSUMI MITSUMI USB FDD , rev 1.00/1.00, addr 2
pcm0: <Intel 82801BA (ICH2)> port 0xe100-0xe13f,0xe000-0xe0ff irq 10 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2446) at 31.6 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
BUS reset
fwohci: node 0x00000000
This host is CYCLEMASTER
ohci0 cable IRM = 0
ohci0 BMR = 0
IP channel assigned as 0x1f
IPsec: Initialized Security Association Processing.
ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <MITSUMI USB FDD 1035> Removable Direct Access SCSI-0 device
da0: 20KB/s transfers
da0: 1MB (2880 512 byte sectors: 2H 18S/T 80C)
APM ioctl: cmd = 0x20005005
called apm_event_enable()
APM ioctl: cmd = 0x4040500b
APM ioctl: cmd = 0xc018500d
APM ioctl: cmd = 0xc018500a
APM ioctl: cmd = 0xc018500a
linux: syscall setup is obsoleted or not implemented (pid=276)
linux: syscall setup is obsoleted or not implemented (pid=276)
linux: syscall fstat64 is obsoleted or not implemented (pid=276)
linux: syscall setup is obsoleted or not implemented (pid=276)
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0
umass0: Unsupported UFI command 0x08, 6 byte command should have been converted
da0: reading primary partition table: error reading fsbn 0
umass0: Unsupported UFI command 0x35
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi status == 0x0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003b01c1b93c$af970190$2603fb93>