Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 22 Feb 2003 14:36:59 -0500
From:      Louis LeBlanc <leblanc+freebsd@keyslapper.org>
To:        freebsd-questions@FreeBSD.ORG
Subject:   Re: Verizon DSL & FreeBSD?
Message-ID:  <20030222193659.GT45398@keyslapper.org>
In-Reply-To: <AMEMKJNMFLJCJDLFIEDBGEKICHAA.aburke@nullplusone.com>
References:  <20030221202053.GF45398@keyslapper.org> <AMEMKJNMFLJCJDLFIEDBGEKICHAA.aburke@nullplusone.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 02/22/03 09:26 AM, Aaron Burke sat at the `puter and typed:
> (snip)
> They dont block 80 on my box, allthough that might be a config setting
> not set in my area.

Ok, mind if I ask you what your network setup looks like?

Mine looks like this:
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=3<rxcsum,txcsum>
        inet6 fe80::2c0:4fff:fe40:d9a%xl0 prefixlen 64 scopeid 0x2 
        ether 00:c0:4f:40:0d:9a
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
        inet6 fe80::2a0:c9ff:fe74:12a3%tun0 prefixlen 64 scopeid 0x8 
        inet 68.160.158.62 --> 10.9.76.1 netmask 0xff000000 
        Opened by PID 56

I think these are the relevant interfaces.  I'm not entirely sure if
this isn't just a masking problem.  Of course that would mean that no
network connection would get through, wouldn't it?  My system at work
had a bad netmask, and any machine outside my subnet had trouble
connecting to the webserver there until I fixed it.

My /etc/ppp/ppp.conf contains the following:

verizon:
 set server /var/run/internet Hidden
 set device PPPoE:xl0
 set mru 1492
 set mtu 1492
 set authname hidden
 set authkey hidden
 set log Phase
 set dial
 set login
 set ifaddr 10.0.0.1/0 10.0.0.2/0
 enable lqr
 add default HISADDR
 disable iface-alias
 iface clear

It is possible that some change to my set ifaddr line could help, but
I don't know what it should be.  Then again, that could be the only
right one there.

Any pointers? - maybe this will help the originator of this thread as
well :)

TIA
Lou
-- 
Louis LeBlanc               leblanc@keyslapper.org
Fully Funded Hobbyist, KeySlapper Extrordinaire :)
http://www.keyslapper.org                     ԿԬ

When the weight of the paperwork equals the weight of the plane, the
plane will fly.
    -- Donald Douglas

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030222193659.GT45398>