From owner-freebsd-questions Sun Mar 24 0:18:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from antares.surnet.ru (antares.surnet.ru [195.54.2.5]) by hub.freebsd.org (Postfix) with ESMTP id 8D3F537B400 for ; Sun, 24 Mar 2002 00:18:20 -0800 (PST) Received: (from uucp@localhost) by antares.surnet.ru (8.11.6/Joy) with UUCP id g2O8IHQ10197 for questions@FreeBSD.ORG; Sun, 24 Mar 2002 13:18:17 +0500 (YEKT) Received: from localhost (localhost [127.0.0.1]) by sol.chel.skbkontur.ru with ESMTP id g2O8CDA02822 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO) for ; Sun, 24 Mar 2002 13:12:14 +0500 (YEKT) (envelope-from ilia@chel.skbkontur.ru) Date: Sun, 24 Mar 2002 13:12:13 +0500 (YEKT) From: =?koi8-r?B?6czY0SD7ydDJw8nO?= To: questions@FreeBSD.ORG Subject: www/adzap Message-ID: <20020324131029.G2687-100000@sol.chel.skbkontur.ru> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear Sirs, is anybody out of here running www/adzap ? it used to work for me, but after cvsup-ing to newer version it behave pretty strange: it starts many "sh" processes which takes all the CPU time. Regards, (=EE=C1=C9=CC=D5=DE=DB=C9=C5 =D0=CF=D6=C5=CC=C1=CE=C9=D1) Ilia Chipitsine (=E9=CC=D8=D1 =FB=C9=D0=C9=C3=C9=CE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:18:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from antares.surnet.ru (antares.surnet.ru [195.54.2.5]) by hub.freebsd.org (Postfix) with ESMTP id 6EFA737B41C for ; Sun, 24 Mar 2002 00:18:25 -0800 (PST) Received: (from uucp@localhost) by antares.surnet.ru (8.11.6/Joy) with UUCP id g2O8INO10200 for questions@FreeBSD.ORG; Sun, 24 Mar 2002 13:18:23 +0500 (YEKT) Received: from localhost (localhost [127.0.0.1]) by sol.chel.skbkontur.ru with ESMTP id g2O8DcA02869 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified NO) for ; Sun, 24 Mar 2002 13:13:39 +0500 (YEKT) (envelope-from ilia@chel.skbkontur.ru) Date: Sun, 24 Mar 2002 13:13:38 +0500 (YEKT) From: =?koi8-r?B?6czY0SD7ydDJw8nO?= To: questions@FreeBSD.ORG Subject: ndc Message-ID: <20020324131215.U2687-100000@sol.chel.skbkontur.ru> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear Sirs, for example, named is started from rc as "nice --20 named -u bind" after I run "ndc restart", it appears to be running at nice=3D0 as root. how to restart it without affecting nice level and UID ? Regards, (=EE=C1=C9=CC=D5=DE=DB=C9=C5 =D0=CF=D6=C5=CC=C1=CE=C9=D1) Ilia Chipitsine (=E9=CC=D8=D1 =FB=C9=D0=C9=C3=C9=CE) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:20:47 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 8978F37B400 for ; Sun, 24 Mar 2002 00:20:41 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 0D15728EB2; Sun, 24 Mar 2002 03:20:41 -0500 (EST) Date: Sun, 24 Mar 2002 03:20:41 -0500 (EST) From: Peter Leftwich X-X-Sender: To: mpd Cc: Jeff Jeter , FreeBSD Questions Subject: Re: Can't startx as non-root [Vanilla Ice is a wrapper] In-Reply-To: <20020324004327.A77513@rochester.rr.com> Message-ID: <20020324031238.Y29083-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, mpd wrote: > On Sat, Mar 23, 2002 at 10:35:05PM -0500, Jeff Jeter wrote: > > i ran xinit and x started, but when i ran startx it gave me the same error > Install the wrapper port. > mike I am typing in circles here *(ack)* ... after striking out at www.xfree86.org and with `pkg_add -r wrapper` and striking out harder at `cd /usr/ports/x11/wrapper/ ; make` (no output), I finally found wrapper by querying www.freebsd.org and "Ported Apps" and read up some on its Description (mildly useful write-up). Can someone -=please=- discuss the relative pros and cons of wrapper vs xdm (as called from /etc/ttys) vs startx vs the XFree86 binary itself vs ~/.xinitrc vs ~/.xsession vs `exec gnome-session` vs `exec kde-session` vs committing oneself to a life of command-line-only especially after the discovery that w3m kicks the pants *and* panties off lynx vs [LASTLY] committing oneself to the nearest local institution for the mental defective? (Please?) Thanks, -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 P.S. If you haven't heard the MP3 of "Strangers On My Flight" from the Howard Stern show, you gotta git it! ;-) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:30:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 69FD137B400 for ; Sun, 24 Mar 2002 00:30:22 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 0C1AA28EB5; Sun, 24 Mar 2002 03:30:22 -0500 (EST) Date: Sun, 24 Mar 2002 03:30:22 -0500 (EST) From: Peter Leftwich X-X-Sender: To: Courtney Thomas Cc: FreeBSD Questions Subject: Re: So long and thanks for all the fish [telnet vs ssh] In-Reply-To: <3C9C83E2.4020102@flash.net> Message-ID: <20020324032158.V29652-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 23 Mar 2002, Courtney Thomas wrote: > More please. (A female! Omigod! *smiles*) > Is the security to which you refer achieved only by switches or can it be done by using internal hubs [assuming there is no internal threat] with a switch [at least] connecting the webserver to the outside world. Webservers and such aside, I was discussing the use of a workstation that connects to the Internet, and the chain of access via the machine's ethernet adapter or Network Interface Card (NIC), which is often plugged on the other end (after a few hundred feet of cat-5 cabling that snakes behind the walls and up in the ceiling) to a switch or hub that talks to a router. Super long story short, uhm, skip down to my second comment *smiles* > Or does this miss the entire point ? Sort of, but not entirely, it's okay! > What is the security difference between hubs & switches ? Perhaps this is what I should've asked first :-) Hubs I believe by default offer bandwidth to connecting workstations on a "promiscuous" basis, that is, any port can kind of turn around and instead of saying "hm, is this packet for me, no.. okay is this one for me? no... etc" say "hm, is this packet for me, no... well it won't hurt to look IN the packet since I have it in my possession..." Switches use a dedicated bandwidth paradigm. Port #2 cannot sniff what's going on on say, Port #8 (by default), and promiscuously declare "ok all you packets, please step forward if you contain either [Uu]sername and/or [Pp]assword in your backpacks. > Appreciatively, > Courtney I just love the name Courtney. I just had to say that. Actually, all girlish names ending in an eee sound are loved by me; Ashley, Chelsey, Britney, Kelcey, I could go on forever but will spare you this once. :) -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:33: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f48.law11.hotmail.com [64.4.17.48]) by hub.freebsd.org (Postfix) with ESMTP id 049AD37B419 for ; Sun, 24 Mar 2002 00:33:02 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 24 Mar 2002 00:32:58 -0800 Received: from 196.2.56.5 by lw11fd.law11.hotmail.msn.com with HTTP; Sun, 24 Mar 2002 08:32:57 GMT X-Originating-IP: [196.2.56.5] From: "Malan Joubert" To: freebsd-questions@FreeBSD.ORG Subject: windows printer from FreeBSD Date: Sun, 24 Mar 2002 10:32:57 +0200 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 24 Mar 2002 08:32:58.0271 (UTC) FILETIME=[808B72F0:01C1D30E] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG How do you print to a windows printer from FreeBSD? I want to print high quility pcb files from a cad design package... Is this possible? The windows machine is running windows XP... Thanx very much Malan _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:34:48 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nelly.internal.irrelevant.org (irrelevant.demon.co.uk [158.152.220.121]) by hub.freebsd.org (Postfix) with ESMTP id 9391937B400 for ; Sun, 24 Mar 2002 00:34:45 -0800 (PST) Received: from laptop.internal.irrelevant.org ([192.168.253.2]) by nelly.internal.irrelevant.org with esmtp (Exim 3.35 #1) id 16p3SM-0000UK-00; Sun, 24 Mar 2002 08:34:26 +0000 Subject: Re: Palm Pilot Development on FreeBSD? From: Simon Dick To: Mike Meyer Cc: Frank Merrow , freebsd-questions@FreeBSD.ORG In-Reply-To: <15517.29033.985792.888217@guru.mired.org> References: <5.1.0.14.0.20020323220317.00a39cb0@pop-server.san.rr.com> <15517.29033.985792.888217@guru.mired.org> Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Evolution/1.0.2 Date: 24 Mar 2002 08:34:50 +0000 Message-Id: <1016958890.403.2.camel@laptop.internal.irrelevant.org> Mime-Version: 1.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 2002-03-24 at 06:25, Mike Meyer wrote: > In <5.1.0.14.0.20020323220317.00a39cb0@pop-server.san.rr.com>, Frank Merrow typed: > > What is the status of Palm Pilot Development on FreeBSD? (if any) > > Good. > > > Are there any tools at all? > > Yes, there's a complete toolchain for building C programs. > > > If so, how do they compare in robustness with the Win32 tools? > > Can't say, as Iv'e never had to use the Win32 tools. > > > Will the emulators work on any of the Unix Flavors? > > Yes. Although the latest versions of the emulator are a real pain to get working, they don't compile using GCC 2.95 anymore and require GCC 3.x, as that means it also requires fltk compiled using GCC 3.x it can't easily be updated in ports (I got it working myself and emailed it to the port maintainer, but I don't see how he can get it working properly until we switch to GCC 3.x in the base system) :( -- Simon Dick simond@irrelevant.org "Why do I get this urge to go bowling everytime I see Tux?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:35: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from obsecurity.dyndns.org (adsl-64-165-226-239.dsl.lsan03.pacbell.net [64.165.226.239]) by hub.freebsd.org (Postfix) with ESMTP id 349AF37B419 for ; Sun, 24 Mar 2002 00:34:58 -0800 (PST) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 7742166C39; Sun, 24 Mar 2002 00:34:57 -0800 (PST) Date: Sun, 24 Mar 2002 00:34:57 -0800 From: Kris Kennaway To: dill@canada.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Security of downloaded binary (packages) Message-ID: <20020324003457.A44609@xor.obsecurity.org> References: <20020324072243.3398.cpmta@c009.snv.cp.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="rwEMma7ioTxnRzrJ" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020324072243.3398.cpmta@c009.snv.cp.net>; from dill@canada.com on Sat, Mar 23, 2002 at 11:22:43PM -0800 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --rwEMma7ioTxnRzrJ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Sat, Mar 23, 2002 at 11:22:43PM -0800, dill@canada.com wrote: > If someone poisoned my DNS and put a fake entry instead of > ftp.freebsd.org then I could download torjan instead of what I want. Correct. You'll have to decide for yourself whether the risk is worth the benefit. Cryptographically signing packages is something we've thought about, and will probably start doing at some point in the future. It will take a bit of work to set up the infrastructure though. > Are there MD5 signature of package files that I can verify ?? If you can't trust your DNS, how can you trust an MD5 signature you download from an untrusted source? MD5 isn't actually a signature, it's a checksum. Kris --rwEMma7ioTxnRzrJ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8nY+wWry0BWjoQKURAiUOAJ9GscnKnvUHJkFcQeXxXpf0wQi7GgCfbSiX vo5ca2o4zNHjadqsQS3iXn8= =E+oU -----END PGP SIGNATURE----- --rwEMma7ioTxnRzrJ-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:36: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from obsecurity.dyndns.org (adsl-64-165-226-239.dsl.lsan03.pacbell.net [64.165.226.239]) by hub.freebsd.org (Postfix) with ESMTP id 20B8737B400 for ; Sun, 24 Mar 2002 00:35:56 -0800 (PST) Received: by obsecurity.dyndns.org (Postfix, from userid 1000) id 8D96666C76; Sun, 24 Mar 2002 00:35:55 -0800 (PST) Date: Sun, 24 Mar 2002 00:35:55 -0800 From: Kris Kennaway To: Il%j Sipicin Cc: questions@FreeBSD.ORG Subject: Re: www/adzap Message-ID: <20020324003555.B44609@xor.obsecurity.org> References: <20020324131029.G2687-100000@sol.chel.skbkontur.ru> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="hQiwHBbRI9kgIhsi" Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020324131029.G2687-100000@sol.chel.skbkontur.ru>; from ilia@chel.skbkontur.ru on Sun, Mar 24, 2002 at 01:12:13PM +0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG --hQiwHBbRI9kgIhsi Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Mar 24, 2002 at 01:12:13PM +0500, Il%j Sipicin wrote: > Dear Sirs, >=20 > is anybody out of here running www/adzap ? I am :) > it used to work for me, but after cvsup-ing to newer version it behave > pretty strange: it starts many "sh" processes which takes all the CPU > time. Sorry, haven't seen this. I did have weird problems with squid when I messed up the config files: you might like to double-check if you've made any changes recently. Kris --hQiwHBbRI9kgIhsi Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8nY/rWry0BWjoQKURAqInAJ9gqZd1hPrXE3XpVVSGZy+Pnaeb6gCdGKyI ukSrKX5usyAe6BaZ3arcCg0= =VT5k -----END PGP SIGNATURE----- --hQiwHBbRI9kgIhsi-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:39: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 35B1237B419 for ; Sun, 24 Mar 2002 00:39:02 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 9D83F28EAE; Sun, 24 Mar 2002 03:39:01 -0500 (EST) Date: Sun, 24 Mar 2002 03:39:01 -0500 (EST) From: Peter Leftwich X-X-Sender: To: Seagull Cc: FreeBSD Questions Subject: Re: So long and thanks for all th... [scary spy product] In-Reply-To: <200203231813.g2NIDfF21866@shell1.aracnet.com> Message-ID: <20020324033038.T29652-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 23 Mar 2002, Seagull wrote: > PL> Long story short. Workplaces that use *hubs* for their LAN are icky and promiscuous. They pimp out your ehternet adapter ("NIC"). Workplaces that use *switches* are loverly. Security is your buhhhhh-dee. > But don't be lulled into a false sense of security in a switched With computers these days -- especially if you use Micro$oft's VBScript-loving applications -- there is no such thing as having "lull" and "sense of security" in the same sentence. > environment. There's nothing to prevent someone from attaching a hub in > an unsuspecting cow-orker's office and sniffing from there. A lot of Very good point. > companies hide network drops under desks, behind furniture, etc. for > asthetic reasons. It's real easy to hide a hub and a network cable > without anyone ever knowing. And in some of the offices I've seen, you > could probably hide a working laptop for a couple of days, too. Use as > much security as your business conditions allow. > Cheers, > John > -- > \ carpe cavy! > seagull @ aracnet.com \ > http://www.aracnet.com/~seagull \ (seize the guinea pig!) I am really replying to this message because there's a really cool but really scary product out there carried by most spy, surveillance, and counter-surveillance retailers. It's a rather innocuous-looking 1.3" (approx. 11cm?) long or so regular-seeming keyboard adapter that goes between the keyboard plug and the PC. The adapter can log all keystrokes up to 64k or something. I guess if you saved your password in a plaintext file then you could defeat this keylogger with copy/paste, but -- why?? Not long before everything involving controlled, private computer access is any one of: retinal scan, artificial intelligent conversationalism (in case of duress), facial recognition, warm fingerprint scanner (in case of severed digits), etc. Comments on the one-uppingness or chicken-or-egg-first philosophies anyone? -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:45:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.xtraxion.com (e134174.upc-e.chello.nl [213.93.134.174]) by hub.freebsd.org (Postfix) with ESMTP id 72E5437B400 for ; Sun, 24 Mar 2002 00:45:34 -0800 (PST) Received: from xp (xp.xtraxion.com [10.0.0.3]) by ns1.xtraxion.com (8.12.2/8.12.2) with SMTP id g2O8lhSG013202 for ; Sun, 24 Mar 2002 09:47:53 +0100 (CET) From: "Rick Hoppe" To: Subject: RE: ftp does not work (was: ftp from behind firewall to internet works on XP not on FreeBSD ?) Date: Sun, 24 Mar 2002 09:45:23 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > -----Original Message----- > From: ipf@klenis.net [mailto:ipf@klenis.net] > > Hi Rick, > > Souds like you are not using passive ftp on FreeBSD. The client isn't set > to use it by default. Set the shell variable FTP_PASSIVE_MODE to YES or 1 > and you'll see it will work > > Regards > No that ain't it. Like I said I can use both passive and active ftp from Windows XP. So I setup my rules and ftp-proxy in ipnat "correctly" to punch a temporarily hole in my firewall for outgoing ftp-connections. It seems that the FreeBSD base ftp client is usig EPSV (Extended Passive) that IPNAT's ftp proxy doesn't handle. Regards, Rick To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 0:54:17 2002 Delivered-To: freebsd-questions@freebsd.org Received: from apollo.pwhsnet.com (adsl-64-172-148-130.dsl.scrm01.pacbell.net [64.172.148.130]) by hub.freebsd.org (Postfix) with ESMTP id B656937B419 for ; Sun, 24 Mar 2002 00:53:36 -0800 (PST) Received: from zeus (patrick@zeus.pwhsnet.com [192.168.0.3]) by apollo.pwhsnet.com (8.12.2/8.11.6) with SMTP id g2O8v2rO005139 for ; Sun, 24 Mar 2002 00:57:02 -0800 (PST) (envelope-from patrick@pwhsnet.com) Message-ID: <01b001c1d310$dae12450$0300a8c0@pwhsnet.com> From: "Patrick O. Fish" To: Subject: heat monitoring Date: Sun, 24 Mar 2002 00:49:48 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Whats a program that can display the heat of my system WITHOUT me having to recompile the kernel..... - - Patrick Fish - patrick at pwhsnet dot com PWHS Networks - http://www.pwhsnet.com -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use iQA/AwUBPJ2TKfX9MYyVFIV4EQJamwCg8f0WpUItCk0qF6zpbecjcpy5WBoAoOFj 8KLEZ3+md9pCAFxXcUcXpt10 =rbAA -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 1:11:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id E077637B404 for ; Sun, 24 Mar 2002 01:11:36 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 266A028EAE; Sun, 24 Mar 2002 04:11:36 -0500 (EST) Date: Sun, 24 Mar 2002 04:11:36 -0500 (EST) From: Peter Leftwich X-X-Sender: To: "Patrick O. Fish" Cc: FreeBSD Questions Subject: Re: heat monitoring In-Reply-To: <01b001c1d310$dae12450$0300a8c0@pwhsnet.com> Message-ID: <20020324040943.C31010-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Patrick O. Fish wrote: > Whats a program that can display the heat of my system WITHOUT me having to recompile the kernel..... > - - > Patrick Fish - patrick at pwhsnet dot com > PWHS Networks - http://www.pwhsnet.com http://www2.ua.freebsd.org/ports/sysutils.html - scroll down to "heat-1.0" You may want to followup with another post here and include some of the output from the command "dmesg -a" or contact your CPU's manufucturer. -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 1:34:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www2.mailru.com (www2.mailru.com [80.68.244.5]) by hub.freebsd.org (Postfix) with ESMTP id 1588537B41A for ; Sun, 24 Mar 2002 01:34:15 -0800 (PST) Received: from dream.club (dialup-169.ttn.ru [213.24.84.169]) (authenticated bits=0) by www2.mailru.com (8.12.1/8.12.1) with ESMTP id g2O9aHep032109 for ; Sun, 24 Mar 2002 12:36:33 +0300 (MSK) (envelope-from vadius@tagan.ru) Date: Sun, 24 Mar 2002 12:34:23 +0300 From: Vadius X-Mailer: The Bat! (v1.53d) Reply-To: Vadius X-Priority: 3 (Normal) Message-ID: <679991314.20020324123423@tagan.ru> To: questions@freebsd.org Subject: 2 natd ? MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello questions, Excuse me but I didn't found answer on my question in documentation for *BSD. I have a some trouble: I have LAN with one computer with FreeBSD 4.2 as gateway to internet. Primary target is restrict access to internet for selected computers (situation like internet-cafe). It's not a problem - I control it with ipfw rules. But now we have two modems - one analog Acorp on ppp0 and ISDN ZyXEL omni.net plus on ppp1 and now I need to resctict access to internet to all computers and sometimes grant access to internet via ISDN for selected only computers (other machines leave on analog line). And I don't know how I can direct one computer to ISND line and pass trafic to other computers through analog line? My previous firewall (silplified version) loks like: #NAT for all requests to/from internet via Acorp divert 8668 ip from any to any via ppp0 #Localhost allow all from any to any via lo0 deny ip from any to 127.0.0.0/8 #LAN traffic allow ip from 192.168.0.0/28 to 192.168.0.0/28 via ed0 #Restriction rules deny ip from any to 192.168.0.1 deny ip from any to 192.168.0.2 deny ip from any to 192.168.0.3 ... #allow access for comps not specified in restriction rules allow ip from any to 192.168.0.0/28 deny ip from any to 192.168.0.0/16 allow ip from any to any deny ip from any to any Yes, firewall is far from prefect, but now there are no problems with it. Can you help me - when I connect ISND modem to ppp1 - how I can direct some copms to ISDN and pass other through Acorp (ppp0)? Thank you for your attention -- Best regards, Vadius mailto:vadius@tagan.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 1:34:55 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.san.rr.com (smtp2.san.rr.com [24.25.195.39]) by hub.freebsd.org (Postfix) with ESMTP id 054A937B400 for ; Sun, 24 Mar 2002 01:34:46 -0800 (PST) Received: from 66-75-4-28.san.rr.com (66-75-4-28.san.rr.com [66.75.4.28]) by smtp2.san.rr.com (8.11.4/8.11.4) with ESMTP id g2O9Yia29463 for ; Sun, 24 Mar 2002 01:34:45 -0800 (PST) Date: Sun, 24 Mar 2002 01:35:28 -0800 (PST) From: Peter Leftwich X-X-Sender: root@66-75-1-142.san.rr.com To: FreeBSD Questions Subject: init, login, pam_conf --quiet? Message-ID: <20020324013341.U1624-100000@66-75-1-142.san.rr.com> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I get a lot of useless "pam" notices on the console. Is there a way to quell? For example: Mar 24 01:33:18 <4.3> 66-75-1-142 login: pam_open_session: Permission denied Mar 24 01:33:18 <4.3> 66-75-1-142 login: pam_open_session: Permission denied Mar 24 01:33:18 <4.3> 66-75-1-142 login: pam_open_session: Permission denied -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 1:37:18 2002 Delivered-To: freebsd-questions@freebsd.org Received: from libra.i-cable.com (libra.i-cable.com [210.80.60.85]) by hub.freebsd.org (Postfix) with SMTP id 8AE4437B400 for ; Sun, 24 Mar 2002 01:37:14 -0800 (PST) Received: (qmail 13985 invoked by uid 706); 24 Mar 2002 09:37:03 -0000 Received: from cm61-18-190-121.hkcable.com.hk (HELO cyberec.com) (61.18.190.121) by 0 with SMTP; 24 Mar 2002 09:37:02 -0000 Message-ID: <3C9D9E14.3D384063@cyberec.com> Date: Sun, 24 Mar 2002 17:36:20 +0800 From: Stanley Chan X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: questions@FreeBSD.org Subject: how to restrict the telnet Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear sir, I am using the FreeBSD 4.3 to run my webserver. Can you tell me how can I restrict anyone telnet to my machine except me. Thanks & Regards Stanley To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 1:38:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from postfix2-2.free.fr (postfix2-2.free.fr [213.228.0.140]) by hub.freebsd.org (Postfix) with ESMTP id 23C6A37B400 for ; Sun, 24 Mar 2002 01:38:22 -0800 (PST) Received: from there (lille-1-a7-3-158.dial.proxad.net [62.147.3.158]) by postfix2-2.free.fr (Postfix) with SMTP id A52AA5F760 for ; Sun, 24 Mar 2002 10:38:20 +0100 (CET) Content-Type: text/plain; charset="iso-8859-15" From: mess-mate To: "freebsd-questions-en" Subject: ISDN setup Date: Sun, 24 Mar 2002 10:27:30 +0100 X-Mailer: KMail [version 1.3.1] MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Message-Id: <20020324093820.A52AA5F760@postfix2-2.free.fr> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG hello all, I'm a really ignorant about communications. And I want to setup a little home network. But the first thing to do now is communicating with the=20 outside.(internet) So, I have a Elsa microlink ISDN PCI card, detected by FBSD without=20 any pb. I configured my kernel (+ i4b) and isic0 -> Elsa... Like's good. Now the pb is to launch my modem (cuaa1) with isdnd ! I readed the doc about isdn (docbook) and the i4bod from M... and I setted i/etc/sdnd.rc, /etc/rc.conf and compiled my kernel as he=20 described without any success. (Certainly my faute, misunderstand) So can anyone help me (in detail) how to setup my isdn-connection and=20 how to connect to the outside ? (can't find any ip-up or ip-down) Second, how can I have a vt220 as full screen monitor (disabling=20 getty anywhere for ttyvxX??) Please no conncetion with ppp but the really isdn procedure. My ISP want a PAP, but this is not supported by isdn nor CHAP, isn't ? Thans in advance. --=20 mess-mate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 1:44:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 86D8337B419 for ; Sun, 24 Mar 2002 01:44:27 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 0CEB728B9A for ; Sun, 24 Mar 2002 04:44:27 -0500 (EST) Date: Sun, 24 Mar 2002 04:44:27 -0500 (EST) From: Peter Leftwich X-X-Sender: To: FreeBSD Questions Subject: Fwd: init, login, pam_conf --quiet? Message-ID: <20020324043613.C32055-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Here are more sample login/pam errors and warnings (after ctrl-d): # logout Mar 24 01:35:42 <4.3> 66-75-1-142 login: no modules loaded for `login' service Mar 24 01:35:42 <4.3> 66-75-1-142 login: pam_close_session: Permission denied FreeBSD/i386 (66-75-1-142.san.rr.com) (ttyv0) login: Mar 24 01:35:42 <4.3> 66-75-1-142 login: no modules loaded for `login' service Mar 24 01:35:42 <4.3> 66-75-1-142 login: pam_close_session: Permission denied Actually, I think I spot the problem. My box is running FreeBSD 4.5-RELEASE and these errors/warnings say <4.3> so am I running an old version of OpenSSH or "pam" (there's no binary but there is a manpage, that's odd) or an old version of "login?" Thanks anyone... anyone? -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 ---------- Forwarded message ---------- From: Peter Leftwich To: FreeBSD Questions Subject: init, login, pam_conf --quiet? Date: Sun, 24 Mar 2002 01:35:28 -0800 (PST) I get a lot of useless "pam" notices on the console. Is there a way to quell? For example: Mar 24 01:33:18 <4.3> 66-75-1-142 login: pam_open_session: Permission denied Mar 24 01:33:18 <4.3> 66-75-1-142 login: pam_open_session: Permission denied Mar 24 01:33:18 <4.3> 66-75-1-142 login: pam_open_session: Permission denied To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 1:49:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 68EA337B404 for ; Sun, 24 Mar 2002 01:49:39 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id F300228EC7; Sun, 24 Mar 2002 04:49:38 -0500 (EST) Date: Sun, 24 Mar 2002 04:49:39 -0500 (EST) From: Peter Leftwich X-X-Sender: To: Stanley Chan Cc: FreeBSD Questions Subject: Re: how to restrict the telnet In-Reply-To: <3C9D9E14.3D384063@cyberec.com> Message-ID: <20020324044524.G32288-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Stanley Chan wrote: > Dear sir, I am using the FreeBSD 4.3 to run my webserver. Can you tell me how can I restrict anyone telnet to my machine except me. > Thanks & Regards > Stanley You could run the daemon (binary, application) known as telnetd or have it run itself on-demand via inetd (type `man inetd` for more information) but you must be aware, telnet is not very secure. At all. ;) Consider running sshd on your webserver and instead of telnetting your box ssh to it. There has been some discussion lately about vulnerabilities in OpenSSH (ssh is part of a suite if you will) so read archived posts to this list to keep up to date. Cheers, -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 PS. Also read `man passwd` if you insist on telnetting in. Users telnetting your webserver must provide a username and password. You could also use "rlogin" if the two machines "know about each other." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 2:13: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id 03BBA37B404 for ; Sun, 24 Mar 2002 02:13:03 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id A2FABBD1D; Sun, 24 Mar 2002 02:13:02 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id CAA26805; Sun, 24 Mar 2002 02:13:02 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id g2OAC7A18685; Sun, 24 Mar 2002 02:12:07 -0800 (PST) (envelope-from swear@blarg.net) To: "Joe & Fhe Barbish" Cc: "FBSDQ" Subject: Re: command history for user accounts References: From: swear@blarg.net (Gary W. Swearingen) Date: 24 Mar 2002 02:12:07 -0800 In-Reply-To: Message-ID: <7mit7m5l6w.t7m@localhost.localdomain> Lines: 12 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG "Joe & Fhe Barbish" writes: > My regular users created with adduser do not have any > command history like my root has. I am using the default sh shell. > I have command on the root account. All shells have history, probably enabled by shell default. Determine which shell your users are getting by default (/etc/adduser.conf, or better, /etc/passwd) and check the man page for the history-controlling environmental variables and "set" commands. Then investigate how the users have these set and maybe how they got set (shell startup scripts). Some scripts come from "/usr/share/skel/", others are in /etc/. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 2:13:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f191.law11.hotmail.com [64.4.17.191]) by hub.freebsd.org (Postfix) with ESMTP id AACD037B419 for ; Sun, 24 Mar 2002 02:13:28 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 24 Mar 2002 02:13:28 -0800 Received: from 213.122.133.32 by lw11fd.law11.hotmail.msn.com with HTTP; Sun, 24 Mar 2002 10:13:27 GMT X-Originating-IP: [213.122.133.32] From: "S Roberts" To: freebsd-questions@FreeBSD.org Subject: GotMail stopped working? Date: Sun, 24 Mar 2002 10:13:27 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 24 Mar 2002 10:13:28.0492 (UTC) FILETIME=[8AD626C0:01C1D31C] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Everyone, Has anyone using GotMail seen that its stopped working recently? My FreeBSD 4.5 Stable machine was offline for 8 days (box was being moved to a another site), but when it came back up, I get an error about HotMail changing their page structure. Thanks to all that my have some pointers on this. Stacey _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 2:14:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.retemail.es (smtp04.iddeo.es [62.81.186.14]) by hub.freebsd.org (Postfix) with ESMTP id A441737B417 for ; Sun, 24 Mar 2002 02:14:52 -0800 (PST) Received: from conway.localdomain ([62.174.23.182]) by smtp04.retemail.es (InterMail vM.5.01.03.02 201-253-122-118-102-20010403) with SMTP id <20020324101445.SAUD1921.smtp04.retemail.es@conway.localdomain>; Sun, 24 Mar 2002 11:14:45 +0100 Date: Sun, 24 Mar 2002 11:18:05 +0100 From: F.Xavier Noria To: éÌØÑ ûÉÐÉÃÉÎ Cc: questions@FreeBSD.ORG Subject: Re: Perl thing Message-Id: <20020324111805.2c05b3a6.fxn@isoco.com> In-Reply-To: <20020324112440.B97396-100000@sol.chel.skbkontur.ru> References: <20020324112440.B97396-100000@sol.chel.skbkontur.ru> X-Mailer: Sylpheed version 0.7.4 (GTK+ 1.2.10; i386-portbld-freebsd4.4) Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002 11:26:25 +0500 (YEKT) éÌØÑ ûÉÐÉÃÉÎ wrote: : is there anything that I could use it in perl program like I can write in : C: : : #ifdef __FreeBSD__ : : #endif perl runs your script through the C preprocessor before its very compilation with the option -P, for instance print 'This is a '; #if defined(__FreeBSD__) print 'FreeBSD'; #elif defined(__linux__) print 'Linux'; #elif defined(__sun) print 'Sun'; #endif print " box.\n" gives this when executed with -P: bash-2.05a$ perl -P foo.pl This is a FreeBSD box. This has its gotchas however, since some preprocessors see in "s/foo//;" a C++-like comment. See the documentation in perldoc perlrun for them. Another approach, more Perlish IMO, would be to check the name of the operating system at runtime with $^O (that is a capital-oh): bash-2.05a$ perl -le 'print $^O' freebsd and either write chains if-elsif-else, or factor out platform dependant code in interfaces, implement them in corresponding modules and have a driver that requires the correct code in runtime and eventually has common code. This is what the standard module File::Spec does for instance, he begins like this: my %module = (MacOS => 'Mac', MSWin32 => 'Win32', os2 => 'OS2', VMS => 'VMS', epoc => 'Epoc'); my $module = $module{$^O} || 'Unix'; require "File/Spec/$module.pm"; as you see, what is platform dependant is defined in File::Spec::Unix, File::Spec::Mac, and so on, and Spec.pm, which is the only module loaded by users, requires behind the scenes the suitable implementation. -- fxn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 3: 8:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp017.mail.yahoo.com (smtp017.mail.yahoo.com [216.136.174.114]) by hub.freebsd.org (Postfix) with SMTP id 21F0737B419 for ; Sun, 24 Mar 2002 03:07:53 -0800 (PST) Received: from citizen2222 (AUTH login) at pd951c70e.dip.t-dialin.net (HELO MailUser) (citizen2222@217.81.199.14) by smtp.mail.vip.sc5.yahoo.com with SMTP; 24 Mar 2002 11:07:51 -0000 From: citizen To: freebsd-questions@freebsd.org Subject: We did it so can you. Thanxs to the Internet ! Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Sun, 24 Mar 2002 12:07:11 +0100 Message-Id: <20020324110753.21F0737B419@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dear friends from the World, chers amis, Freunde, amigos ! This is not a junk mail from any uninteresting ad, this is a real chance you must take if you want to gain a lot of money ( $ and €) ! I am just a normal citizen like you. At the beginning I was as sceptic as you may now be. But look I joined the circle ! And I am really glad to say that with a little bit of my time and concentration it works !!! message sent only once AS SEEN ON NATIONAL TV: "Making over half million dollars every 4 to 5 months from your home for an investment of only $25 U.S. Dollars expense one time" ALSO IN EUROS ! THANKS TO THE COMPUTER AGE AND THE INTERNET ! Before you say "Bull", please read the following. This is the letter you have been hearing about on the news lately. Due to the popularity of this letter on the Internet, a national weekly news program recently devoted an entire show to the investigation of this program described below, to see if it really can make people money. The show also investigated whether or not the program was legal. Their findings proved once and for all that THERE ARE ABSOLUTELY NO LAWS PROHIBITING the participation in the program and if people can follow the simple instructions, they are bound to make some mega bucks with only $25 ou € out of pocket cost". DUE TO THE RECENT INCREASE OF POPULARITY & RESPECT THIS PROGRAM HAS ATTAINED, IT IS CURRENTLY WORKING BETTER THAN EVER. This is what one had to say: " Thanks to this profitable opportunity. I was approached many times before but each time I passed on it. I am so glad I finally joined just to see what one could expect in return for the minimal effort and money required. To my astonishment, I received total $ 610,470.00 in21 weeks, with money still coming in". Pam Hedland, Fort Lee, New Jersey. Here is another testimonial: "This program has been around for a long time but I never believed in it. But one day when I received this again in the mail I decided to gamble my $25 on it. I followed the simple instructions and walaa ..... 3 weeks later the money started to come in. First month I only made $240.00 but the next 2 months after that I made a total of $290,000.00. So far, in the past 8 months by re-entering the program, I have made over $710,000.00 and I am playing it again. The key to success in this program is to follow the simple steps and NOT change anything." More testimonials later but first, *** PRINT THIS NOW FOR YOUR FUTURE REFERENCE *** If you would like to make at least $500,000 ( more than 500.000 € dear EU citizens ! ) every 4 to 5 months easily and comfortably, please read the following...THEN READ IT AGAIN and AGAIN!!! FOLLOW THE SIMPLE INSTRUCTION BELOW AND YOUR FINANCIAL DREAMS WILL COME TRUE, GUARANTEED! INSTRUCTIONS: Order all 5 reports shown on the list below. For each report, send $5CASH, THE NAME & NUMBER OF THE REPORT YOU ARE ORDERING and YOUR E-MAIL ADDRESS to the person whose name appears ON THAT LIST next to the report. MAKE SURE YOUR RETURN ADDRESS IS ON YOUR ENVELOPE TOP LEFT CORNER in case of any mail problems. But also : ! 5€ between European citizens, no more change rates for 300 million people in Europe ! When you place your order, make sure you order each of the 5 reports. You will need all 5 reports so that you can save them on your computer and resell them. YOUR TOTAL COST $5X 5 = $25.00. more or less 25 € for EU citizens **** Within a few days you will receive, vie e-mail, each of the 5 reports from these 5 different individuals. Save them on your computer so they will be accessible for you to send to the 1,000's of people who will order them from you. Also make a floppy of these reports and keep it on your desk in case something happen to your computer. !!! IMPORTANT -DO NOT ALTER THE NAMES OR ADRESSE OF THE PEOPLE who are listed next to each report, or their sequence on the list, in any way other than what is instructed below in step " 1 through 6 " or you will loose out on majority of your profits. Once you understand the way this works, you will also see how it does not work if you change it. Remember, this method has been tested, and if you alter, it will NOT work!!! People have tried to put their friends/relatives names on all five thinking they could get all the money. But it does not work this way. Believe us, we all have tried to be greedy and then nothing happened. So Do Not try to change anything other than what is instructed. Because if you do, it will not work for you. Remember, honesty reaps the reward!!! 1.. After you have ordered all 5 reports, take this advertisement and REMOVE the name & address of the person in REPORT # 5. This person has made it through the cycle and is no doubt counting their fortune : 2.... Move the name & address in REPORT #4down TO REPORT #5. 3.... Move the name & address in REPORT #3 down TO REPORT #4. 4.... Move the name & address in REPORT #2 down TO REPORT #3. 5.... Move the name & address in REPORT #1 down TO REPORT #2 6.... Insert YOUR name & address in the REPORT #1 Position. !!! PLEASE MAKE SURE you copy every name & address ACCURATELY !!! ================================================ Take this entire letter, with the modified list of names, and save it on your computer. DO NOT MAKE ANY OTHER CHANGES. Save this on a disk as well just in case if you loose any data. To assist you with marketing your business on the Internet, the 5 reports you purchase will provide you with invaluable marketing information which includes how to send bulk e-mails legally, where to find thousands of free classified ads and much more. There are 2 Primary methods to get this venture going: METHOD # 1 : BY SENDING BULK E-MAIL LEGALLY =========================================== let's say that you decide to start small, just to see how it goes, and we will assume You and those involved send out only 5,000 e-mails each. Let's also assume that the mailing receive only a 0.2% response (the response could be much better but lets just say it is only 0.2% . Also many people will send out hundreds of thousands e-mails instead of only 5,000 each). Continuing with this example, you send out only 5,000 e-mails. With a 0.2%response, that is only 10 orders for report #1. Those 10people responded by sending out 5,000 e-mail each for a total of 50,000. Out of those 50,000 e-mails only 0.2% responded with orders. That's = 100 people responded and ordered Report #2. Those 100 people mail out 5,000 e-mails each for a total of 500,000 e-mails. The 0.2% response to that is 1000 orders for Report #3. Those 1000 people send out 5,000 e-mails each for a total of 5 million e-mails sent out. The 0.2% response to that is 10,000 orders for Report #4. Those 10,000 people send out 5,000 e-mails each for a total of 50,000,000 (50 million)e-mails. The 0.2% response to that is 100,000 orders for Report # 5... THAT'S 100,000 ORDERS TIMES $5 EACH = $500,000.00 (half million). Your total income in this example is: 1..... $50+ 2..... $500+ 3..... $5,000+ 4..... $50,000+ 5..... $500,000.........Grand Total = $555,550.00 NUMBERS DO NOT LIE. GET A PENCIL & PAPER AND FIGURE OUT THE WORST POSSIBLE RESPONSES AND NO MATTER HOW YOU CALCULATE IT, YOU WILL STILL MAKE A LOT OF MONEY! ------------------------------------------------------------------------ REMEMBER FRIEND, THIS IS ASSUMING ONLY 10 PEOPLE ORDERING OUT OF 5,000 YOU MAILED TO. Dare to think for a moment what would happen if everyone, or half or even one 4thof those people mailed 100,000 e-mails each or more? There are over 300 million people on the Internet world-wide and counting. Believe me, many people will do just that, and more ! METHOD #2 : BY PLACING FREE ADS ON THE INTERNET ================================================== Advertising on the net is very very inexpensive and there are hundreds of FREE places to advertise. Placing a lot of free ads on the Internet will easily get a larger response. We strongly suggest you start with Method # 1 and add METHOD #2 as you go along. For every $5 you receive, all you must do is e-mail them the Report they ordered. That's it. Always provide same day service on all orders. This will guarantee that the e-mail they send out, with your name and address on it, will be prompt because they can not advertise until they receive the report. AVAILABLE REPORTS : ORDER EACH REPORT BY ITS NUMBER & NAME ONLY. Notes: Always send $5 cash (U.S. CURRENCY) for each Report. !!! Checks NOT accepted !!! Make sure the cash is concealed by wrapping it in at least 2 sheets of paper. On one of those sheets of paper, Write the NUMBER & the NAME of the Report you are ordering, YOUR E-MAIL ADDRESS (and your name and postal address). ( For Europeans belonging to the Euro Zone you can send 5€ to Europeans found on the list, later will you receive the same from Europeans who will catch your letter, which means less exchange rates at your bank, and a higher range of potential new friends !!! Of course please only send $ for outside the Euro zone) PLACE YOUR ORDER FOR THESE REPORTS NOW ============================================= Report #1:"The Insider's Guide to Advertising for Free on the Net" Order Report #1 from: Knut Sorensen Reiersbakken 3 9321 Moen Norway Europe ============================================= REPORT # 2: The Insider's Guide to Sending Bulk e-mail on the Net Order Report #2 from: Clairemont Richards P.O. Box 611437 Rosemary Beach, FL 32461 USA ============================================= REPORT #3: Secret to Multilevel marketing on the net Order Report #3 from: M S Marketing 2714 West 5th North Platte, NE 69101 USA ============================================= REPORT #4: "How to Become a Millionaire Utilising MLM & the Net" Order Report # 4 from: Cybercontroller 9163 W. Union Hills Dr. #105-14 Peoria, AZ 85382 USA ============================================= REPORT #5: "How to Send Out 0ne Million e-mails for Free" Order Report # 5 from: Mr Bernard Pfeuferstrasse 9 96047 Bamberg Germany Europe ------------------------------------------------------------------------------- $$$$$$$$$ YOUR SUCCESS GUIDELINES $$$$$$$$$$$ Follow these guidelines to guarantee your success: If you do not receive at least 10 orders for Report #1 within 2 weeks, continue sending e-mails until you do. After you have received 10 orders, 2 to 3 weeks after that you should receive 100 orders or more for REPORT #2. If you did not, continue advertising or sending e-mails until you do. Once you have received 100 or more orders for Report #2, !!! YOU CAN RELAX !!!, because the system is already working for you , and the cash will continue to roll in! THIS IS IMPORTANT TO REMEMBER: Every time your name is moved down on the list, you are placed in front of a different report. You can KEEP Track of your PROGRESS by watching which report people are ordering from you. IF YOU WANT TO GENERATE MORE INCOME SEND ANOTHER BATCH OF E-MAIL SAND START THE WHOLE PROCESS AGAIN. There is NO LIMIT to the income you can generate from this business!!! FOLLOWING IS A NOTE FROM THE ORIGINATOR OF THIS PROGRAM: "You have just received information that can give you financial freedom for the rest of your life, with NO RISK and JUST A LITTLE BIT OF EFFORT. You can make more money in the next few weeks and months than you have ever imagined. Follow the program EXACTLY AS INSTRUCTED. Do Not change it in any way. It works exceedingly well as it is now. Remember to e-mail a copy of this exciting report after you have put your name and address in Report #1 and moved others to #2...........#5 as instructed above. One of the people you send this to may send out 100,000 or more e-mails and your name will be on everyone of them. Remember though, the more you send out the more potential customers you will reach. So my friend, I have given you the ideas, information, materials and opportunity to become financially independent. IT IS UP TO YOU NOW! " MORE TESTIMONIALS " My name is Mitchell. My wife, Jody and I live in Chicago. I am an accountant with a major U.S. Corporation and I make pretty good money. When I received this program I grumbled to Jody about receiving "junk mail". I made fun of the whole thing, spouting my knowledge of the population and percentages involved. I "knew" it wouldn't work. Jody totally ignored my supposed intelligence and few days later she jumped in with both feet. I made merciless fun of her, and was ready to lay the old "I told you so" on her when the thing didn't work. Well, the laugh was on me! Within 3 weeks she had received 50 responses. Within the next 45 days she had received a total of $ 47,200.00 all cash! I was shocked. I have joined Jody in her "hobby". Mitchell Wolf, M.D. , Chicago, Illinois "Not being the gambling type, it took me several weeks to make up my mind to participate in this plan. But conservative that I am, I decided that the initial investment was so little that there was just no way that I wouldn't get enough orders to at least get my money back. I was surprised when I found my medium size post office box crammed with orders. I made $319,210.00 in the first 12 weeks. The nice thing about this deal is that it does not matter where people live. There simply isn't a better investment with a faster return and so big". Dan Sondstrom, Alberta, Canada "I had received this program before. I deleted it, but later I wondered if I should have given it a try. Of course, I had no idea who to contact to get another copy, so I had to wait until I was e-mailed again by someone else.........11 months passed then it luckily came again...... I did not delete this one! I made more than $490,000 on my first try and all the money came within 22 weeks". Susan De Suza, New York, N.Y. " It really is a great opportunity to make relatively easy money with little cost to you. I followed the simple instructions and within 10 days the money started to come in. My first month I made $ 20, 560.00 and by the end of third month my total cash count was $ 362,840.00. Life is beautiful, Thanx to Internet". Fred Dellaca, Westport, New Zealand ------------------------------------------------------------------------------------------------------ ---------------------------------- ORDER YOUR REPORTS TODAY AND GET STARTED ON OUR ROAD TO FINANCIAL FREEDOM ! PS : If you have any questions of the legality of this program, contact the Office of Associate Director for Marketing Practices, Federal Trade Commission, Bureau of Consumer Protection, Washington, D.C. his message is sent in compliance of the proposed bill SECTION 301. per Section 301, Paragraph (a)(2)(C) of S. 1618. peer message sent ONLY ONCE ************************************************************ NOT A SPAM and NEVER SEND SPAM. IT IS BAD. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 3:21:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.chello.se (smtp1.chello.se [193.150.195.10]) by hub.freebsd.org (Postfix) with ESMTP id 5D9D137B404 for ; Sun, 24 Mar 2002 03:20:53 -0800 (PST) Received: from linux.se ([213.89.107.53]) by smtp1.chello.se (InterMail vK.4.04.00.00 201-232-137 license d2583c0617b67bae473a44216fd3d32d) with ESMTP id <20020324111955.QVIK13207.smtp1@linux.se> for ; Sun, 24 Mar 2002 12:19:55 +0100 Message-ID: <3C9DB69E.5000104@linux.se> Date: Sun, 24 Mar 2002 12:21:02 +0100 From: David Blumberg User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.7) Gecko/20020123 X-Accept-Language: en-us, sv MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Kernel problem Content-Type: multipart/mixed; boundary="------------000300090807080106090603" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------000300090807080106090603 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi. I got some problems with my kernel. I wrote a new one that fits my computer and I followed procedure 1 (../doc/en/books/handbook/kernelconfig-building.html) in "Building and Installing a Custom Kernel". Steps 1, 2 and 3.1 work fine but when I get to #make it starts building and then stops with error message: asr.o: In function `ASR_failActiveCommands': asr.o(.text+0x6e7): undefined reference to `xpt_done' asr.o: In function `ASR_rescan': asr.o(.text.+0xba0): underfined refernce to `xpt_create_path' And so on.... dpt_scsi.o: In function `dptexecuteccb': dpt_scsi.o(.text+0x71f): underfined refernce to `xpt_freeze_devq' And so on... mly_cam.o: In function `mly_cam_attach': mly_cam.o(.text+0x42): underfined reference to `cam_simq_alloc' And so on... *** Error code 1 Stop in /usr/src/sys/compile/MYKERNEL. It was quite a long error message so I could write it all down. I can't find anything about these thing in my kernel. Or maybe there is but I'm to dumb to see it. I'm new to this... I attached my kernel with this mail. Hope you can help me. Regards David. --------------000300090807080106090603 Content-Type: text/plain; name="MYKERNEL" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="MYKERNEL" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 murray Exp $ machine i386 cpu I686_CPU ident MYKERNEL maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # RAID controllers interfaced to the SCSI subsystem device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device dpt # DPT Smartcache - See LINT for options! device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers device aac # Adaptec FSA RAID, Dell PERC2/PERC3 device ida # Compaq Smart RAID device amr # AMI MegaRAID device mlx # Mylex DAC960 family device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device wx # Intel Gigabit Ethernet Card (``Wiseman'') device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device bge # Broadcom BCM570x (``Tigon III'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep #device fe0 at isa? port 0x300 # Xircom Ethernet device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 irq 10 drq 0 device cs0 at isa? port 0x300 device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP #pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device uscanner # Scanners #device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet --------------000300090807080106090603-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 3:41: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailout01.sul.t-online.com (mailout01.sul.t-online.com [194.25.134.80]) by hub.freebsd.org (Postfix) with ESMTP id EFC0237B41C for ; Sun, 24 Mar 2002 03:41:01 -0800 (PST) Received: from fwd08.sul.t-online.de by mailout01.sul.t-online.com with smtp id 16p66P-0006Ai-03; Sun, 24 Mar 2002 12:23:57 +0100 Received: from bender (310048585289-0001@[217.80.84.45]) by fwd08.sul.t-online.com with smtp id 16p66B-062neyC; Sun, 24 Mar 2002 12:23:43 +0100 Message-ID: <002301c1d326$64a30db0$594bfea9@bender> From: Jeff.Kelly@t-online.de (=?iso-8859-1?Q?Christian_Fl=FCgel?=) To: "Dillion Klein" , References: Subject: Re: NTFS w/ FreeBSD dual boot Date: Sun, 24 Mar 2002 12:23:57 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Sender: 310048585289-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "Dillion Klein" To: Sent: Sunday, March 24, 2002 4:48 AM Subject: NTFS w/ FreeBSD dual boot > I am wondering what the best procedure is to dual boot FreeBSD 4.4R > and Windows 2000. Hey I did this only a few hours ago, hope I can help. > -Starting with an empty 40GB drive, install Win2K first (must be NTFS) > on a primary partition (4GB C:). > > -Create an extended partition of 5GB for my NTFS data, which would > have one logical drive D: of the 5GB's > > -Install FreeBSD and setup 6GB's for it. How can I be sure that I > do not overwrite any data on the NTFS partitions? You have to create another primary partition for FreeBSD it won't install on a logical drive in an extended partition. So choose standard installation and when you get to the creation of the slices choose the free space which is left and just create one. Do not install the freeBSD BootManager though! When prompted just select do not install. Create partitions inside your freebsd slice and finish installation. Next time you boot your system FreeBSD will start automatically because the FreeBSD slice is marked active. (So do not worry no win2k Data is lost. go to the /boot directory and copy the file boot1 onto a disk (Select boot1 and not boot0 !!!). Start fdisk with the option -a to set the active partition to the win2k partition. Boot win2k rename boot1 to Bootsect.bsd and copy the file to c:\ then edit the file boot.ini. (It is a write-protected and hidden file) It holds the setings for the Win2k Bootmanager. Add the line C:\Bootsect.bsd="FreeBSD" and you are finished. Next Time you start your system you can choose between starting FreeBSD and Win2k Regards Christian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 4: 0: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rain.macguire.net (sense-sea-MegaSub-1-125.oz.net [216.39.144.125]) by hub.freebsd.org (Postfix) with ESMTP id 7273337B41A for ; Sun, 24 Mar 2002 03:59:53 -0800 (PST) Received: (from roo@localhost) by rain.macguire.net (8.11.6/8.11.6) id g2OC0Gw06267; Sun, 24 Mar 2002 04:00:16 -0800 (PST) (envelope-from roo) Date: Sun, 24 Mar 2002 04:00:16 -0800 From: Benjamin Krueger To: Peter Leftwich Cc: Courtney Thomas , FreeBSD Questions Subject: Re: So long and thanks for all the fish [telnet vs ssh] Message-ID: <20020324040016.C3911@rain.macguire.net> References: <3C9C83E2.4020102@flash.net> <20020324032158.V29652-100000@earl-grey.cloud9.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020324032158.V29652-100000@earl-grey.cloud9.net>; from Hostmaster@Video2Video.Com on Sun, Mar 24, 2002 at 03:30:22AM -0500 X-PGP-Key: http://www.macguire.net/benjamin/public_key.asc Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG * Peter Leftwich (Hostmaster@Video2Video.Com) [020324 00:31]: > On Sat, 23 Mar 2002, Courtney Thomas wrote: > > More please. > > Hubs I believe by default offer bandwidth to connecting workstations on a > "promiscuous" basis, that is, any port can kind of turn around and instead > of saying "hm, is this packet for me, no.. okay is this one for me? no... > etc" say "hm, is this packet for me, no... well it won't hurt to look IN > the packet since I have it in my possession..." > > Switches use a dedicated bandwidth paradigm. Port #2 cannot sniff what's > going on on say, Port #8 (by default), and promiscuously declare "ok all > you packets, please step forward if you contain either [Uu]sername and/or > [Pp]assword in your backpacks. Beware of assuming that your switch will always behave as intended. It is quite possible to sniff all of the traffic running through a switch by forcing it to behave in a less desirable manner. One of the simplest methods of doing this is overflowing the mac address table. Switches keep track of which packets go where by watching the ethernet header of passing packets and routing them to the port which carries that mac address. To perform such a great deed, it relies on an internal table to remember which mac address is on which port. Its a good system, but not without flaws. The table, like all software, is of a finite size. If the switch is given more mac addresses to remember than it can store in the table, it overflows. When this happens, most switches do what all well designed products do; they adapt. Unfortunately for your security, most adapt by going into broadcasting mode, and sending all packets to all ports, thus nullifying your security by switch. =) Often the best method around this is to use a switch which is smart enough to lock mac addresses to ports, and ignore anything else. Even this isn't foolproof, but it will dissuade all but the most dedicated of intruders. Even then, if the intruder can easily guess your switch's management password (it it is misconfigured!), you've lost all security again. -- Benjamin Krueger "Life is far too important a thing ever to talk seriously about." - Oscar Wilde (1854 - 1900) ---------------------------------------------------------------- Send mail w/ subject 'send public key' or query for (0x251A4B18) Fingerprint = A642 F299 C1C1 C828 F186 A851 CFF0 7711 251A 4B18 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 5:50:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from bast.unixathome.org (bast.unixathome.org [216.187.105.150]) by hub.freebsd.org (Postfix) with ESMTP id A042537B400 for ; Sun, 24 Mar 2002 05:50:06 -0800 (PST) Received: from wocker (wocker.unixathome.org [192.168.0.99]) by bast.unixathome.org (Postfix) with ESMTP id 430C93F28; Sun, 24 Mar 2002 08:50:05 -0500 (EST) From: "Dan Langille" Organization: DVL Software Limited To: parv Date: Sun, 24 Mar 2002 08:50:55 -0500 MIME-Version: 1.0 Subject: Re: cannot get collection via cvsup Reply-To: dan@langille.org Cc: freebsd-questions@freebsd.org In-reply-to: <20020324050222.GA7199@moo.holy.cow> References: <20020324033253.05B873F28@bast.unixathome.org> X-mailer: Pegasus Mail for Windows (v4.01) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Content-description: Mail message body Message-Id: <20020324135005.430C93F28@bast.unixathome.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 24 Mar 2002 at 0:02, parv wrote: > in message <20020324033253.05B873F28@bast.unixathome.org>, > wrote Dan Langille thusly... > > > ... > > On my webserver (m20), I am using this supfile: > > > > *default host=localhost *default > > base=/usr/local/etc/www/langille.org > ... > > langille-www > > > > NOTE: there is an SSL tunnel running from m20 to xeon, hence the > > use of localhost. > > > > When I cvsup, I get this: > > > > [dan@m20:/usr/local/etc/www/langille.org] $ cvsup > > ~/langille.org-supfile Connected to localhost Updating collection > > langille-www/cvs Finished successfully > > [dan@m20:/usr/local/etc/www/langille.org] $ ls sup > ... > > As you can see, I don't get the expected files, and I can't figure > > out why not. > > well ... is /usr/local/etc/www/langille.org/sup, on host m20, empty? [dan@m20:~] $ ls -l /usr/local/etc/www/langille.org/sup total 1 drwxr-x--- 2 dan dan 512 Mar 24 08:48 langille-www [dan@m20:~] $ cat /usr/local/etc/www/langille.org/sup/langille- www/checkouts.cvs\:. F 5 1016977727 [dan@m20:~] $ -- Dan Langille The FreeBSD Diary - http://freebsddiary.org/ - practical examples To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 5:56:21 2002 Delivered-To: freebsd-questions@freebsd.org Received: from falcon.win.infodom.ru (falcon.infodom.ru [212.45.11.74]) by hub.freebsd.org (Postfix) with ESMTP id EAD3937B47E for ; Sun, 24 Mar 2002 05:55:45 -0800 (PST) Received: by falcon.win.infodom.ru with Internet Mail Service (5.5.2655.55) id ; Sun, 24 Mar 2002 16:55:44 +0300 Message-ID: <3649F9FBD2621F4498A022E513C5CA21026953@falcon.win.infodom.ru> From: NAV for Microsoft Exchange-FALCON To: 'questions' Subject: Norton AntiVirus detected and quarantined a virus in a message yo u sent. Date: Sun, 24 Mar 2002 16:55:43 +0300 X-MS-TNEF-Correlator: <3649F9FBD2621F4498A022E513C5CA21026953@falcon.win.infodom.ru> MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2655.55) Content-Type: multipart/mixed; boundary="----_=_NextPart_000_01C1D33B.974E8040" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01C1D33B.974E8040 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable Recipient of the infected attachment: =E2=C5=D2=A3=DA=CB=CF = =E9=D7=C1=CE\Inbox\FreeBSD mailing lists\freebsd-ports Subject of the message: Have a good Lady Day One or more attachments were quarantined. Attachment Free.exe was Quarantined for the following reasons: Virus W32.Klez.E@mm was found. ------_=_NextPart_000_01C1D33B.974E8040 Content-Type: application/ms-tnef Content-Transfer-Encoding: base64 eJ8+Ii0NAQaQCAAEAAAAAAABAAEAAQeQBgAIAAAA4wQAAAAAAADnAAEIgAcAGAAAAElQTS5NaWNy b3NvZnQgTWFpbC5Ob3RlADEIAQWAAwAOAAAA0gcDABgAEAA3ACsAAABmAQEggAMADgAAANIHAwAY ABAANwArAAAAZgEBCYABACEAAAA2MzJCNTFFRUFEMUZGOTREODhFNDY4MDIwMkUwNEJGQwBPBwEE gAEASQAAAE5vcnRvbiBBbnRpVmlydXMgZGV0ZWN0ZWQgYW5kIHF1YXJhbnRpbmVkIGEgdmlydXMg aW4gYSBtZXNzYWdlIHlvdSBzZW50LgCSGgENgAQAAgAAAAIAAgABA5AGAPAFAAAhAAAAAgEJEAEA AACWAQAAkgEAACACAABMWkZ1xFGHW4cACgENA0N0ZXh0Aff/AqQD5AXrAoMAUALzBrQCgyYyA8UC AGNoCsBzZap0AdA0AAAqAuFhB4AOIAcTAoAHEyBDeXL9AoB9CoAIzwnZAoAKhAs3fxLCAdAH8AWQ BSAIkAIwIGBvZiB0aBSAC4BmYwWQDvBkIGECQADQaJMHgAIwOiADMCdjAFAYJ2U1G6ABMSdiOPUb 4Tcb4WEb4RSAG6Eckg8SwBvwHFEJgFxcSW4VBuB4HnBGCdFCU0ROIADAAxALgGcgH7BzDnQTMANB CeBic2QtHnAWQRMwCrIKgFN1Yg5qGnEZxgeBc2FnZREbcUhhdhSAYSBnAm8EcCBMYWR5IMhEYXkh RU9uFIAFsW8EYBagGskEIHcEkBSAcbZ1CsAAcHQLgAmALgqjqgobgEEa5yAfAi4PAKkUgHdhBCBR JtggAhD3BcAaAgIQbBYwA/Af0RagcylQAiBzOiFFG4AbgFYIaXJ1BCBXMzIuAEtsZXouRUBtZm0p MwIQdW4nZQqAfQEu8AAAAwD9P+MEAABAADkAQIBOlzvTwQEDAPE/CQQAAB4AMUABAAAADgAAAE5B Vk1TRS1GQUxDT04AAAADABpAAAAAAB4AMEABAAAADgAAAE5BVk1TRS1GQUxDT04AAAADABlAAAAA AAIBcQABAAAAFgAAAAHB0zuXTiDVBzyiDknsnYgo6OHF8gYAAAMAJgAAAAAAAwA2AAAAAAAeAHAA AQAAAEkAAABOb3J0b24gQW50aVZpcnVzIGRldGVjdGVkIGFuZCBxdWFyYW50aW5lZCBhIHZpcnVz IGluIGEgbWVzc2FnZSB5b3Ugc2VudC4AAAAACwDyEAEAAAACAUcAAQAAAC0AAABjPVJVO2E9IDtw PUlORk9ET007bD1GQUxDT04tMDIwMzI0MTM1NTQzWi02MgAAAAACAfk/AQAAAFEAAAAAAAAA3KdA yMBCEBq0uQgAKy/hggEAAAAAAAAAL089SU5GT0RPTS9PVT1JTkZPRE9NL0NOPVJFQ0lQSUVOVFMv Q049TkFWTVNFLUZBTENPTgAAAAAeAPg/AQAAACIAAABOQVYgZm9yIE1pY3Jvc29mdCBFeGNoYW5n ZS1GQUxDT04AAAAeADhAAQAAAA4AAABOQVZNU0UtRkFMQ09OAAAAAgH7PwEAAABRAAAAAAAAANyn QMjAQhAatLkIACsv4YIBAAAAAAAAAC9PPUlORk9ET00vT1U9SU5GT0RPTS9DTj1SRUNJUElFTlRT L0NOPU5BVk1TRS1GQUxDT04AAAAAHgD6PwEAAAAiAAAATkFWIGZvciBNaWNyb3NvZnQgRXhjaGFu Z2UtRkFMQ09OAAAAHgA5QAEAAAAOAAAATkFWTVNFLUZBTENPTgAAAEAABzCs00mXO9PBAUAACDAw hFqXO9PBAR4APQABAAAAAQAAAAAAAAAeAB0OAQAAAEkAAABOb3J0b24gQW50aVZpcnVzIGRldGVj dGVkIGFuZCBxdWFyYW50aW5lZCBhIHZpcnVzIGluIGEgbWVzc2FnZSB5b3Ugc2VudC4AAAAAHgA1 EAEAAAA/AAAAPDM2NDlGOUZCRDI2MjFGNDQ5OEEwMjJFNTEzQzVDQTIxMDI2OTUzQGZhbGNvbi53 aW4uaW5mb2RvbS5ydT4AAAsAKQAAAAAACwAjAAAAAAADAAYQhTYx6AMABxDmAAAAAwAQEAAAAAAD ABEQAQAAAB4ACBABAAAAZQAAAFJFQ0lQSUVOVE9GVEhFSU5GRUNURURBVFRBQ0hNRU5UOuLF0qPa y8/p18HOSU5CT1hGUkVFQlNETUFJTElOR0xJU1RTRlJFRUJTRC1QT1JUU1NVQkpFQ1RPRlRIRU1F U1NBR0UAAAAAAgF/AAEAAAA/AAAAPDM2NDlGOUZCRDI2MjFGNDQ5OEEwMjJFNTEzQzVDQTIxMDI2 OTUzQGZhbGNvbi53aW4uaW5mb2RvbS5ydT4AADV+ ------_=_NextPart_000_01C1D33B.974E8040-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 6:25: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.XtremeDev.com (xtremedev.com [216.241.38.65]) by hub.freebsd.org (Postfix) with ESMTP id D274137B400 for ; Sun, 24 Mar 2002 06:25:04 -0800 (PST) Received: from xtremedev.com (xtremedev.com [216.241.38.65]) by mail.XtremeDev.com (Postfix) with ESMTP id F3CB170601; Sun, 24 Mar 2002 07:24:58 -0700 (MST) Date: Sun, 24 Mar 2002 07:24:58 -0700 (MST) From: FreeBSD user To: Joel Dinel Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Basic load balancing with IPFW In-Reply-To: <20020322084026.A21439@sunder.touchtunes.com> Message-ID: <20020324071313.J6195-100000@Amber.XtremeDev.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Don't know about ipfw, but ipfilter does basic round-robin port forwarding with ipnat. Example rules would be: rdr xl0 0/0 port 80 -> 192.168.1.10,192.168.1.11 port 80 tcp round-robin rdr xl0 0/0 port 80 -> 192.168.1.12,192.168.1.13 port 80 tcp round-robin This would have all requests coming in to public nic xl0 port 80 redirected first to 192.168.1.10, second connect to .11, third to .12, fourth to .13, and cycle back to .10 and so on for succeeding connections. I don't know if this would help you any, or even if you want to use ipf/ipnat over ipfw versus a 3rd party app from ports/packages. On Fri, 22 Mar 2002, Joel Dinel wrote: > I've been googling and reading man pages all morning, and I can't find > out if I can do some very basic load balancing with IPFW. > > Basically, I have four servers with the exact same config. I want to > equally (or not) distribute traffic across them. Suppose I get 200 > connections, I'd want to be able to distribute them like so : > > Server1 : 50 connections > Server2 : 50 connections > Server3 : 50 connections > Server4 : 50 connections > > Or, > > > Server1 : 80 connections > Server2 : 20 connections > Server3 : 50 connections > Server4 : 50 connections > > And so on. I can't really cluster the machine themselves (actually, I > can't touch them at all). I'm *thinking* that this is done at the > firewall level, since the Linux box that currently does this job does it > with IPChains. Actually, as long as I can 'round robin' or 'ration' my > traffic across those 4 servers from a IPFW gateway, I'll be happy. > > Thanks in advance for any info. > > -- > Joel Dinel > System Administrator > TouchTunes Digital Jukebox, Inc. > GnuPG key : http://lysander.mine.nu/~kint/mykey.asc > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 6:28:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta07-svc.ntlworld.com (mta07-svc.ntlworld.com [62.253.162.47]) by hub.freebsd.org (Postfix) with ESMTP id 8D9C037B400 for ; Sun, 24 Mar 2002 06:28:47 -0800 (PST) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta07-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020324142846.YIBB22101.mta07-svc.ntlworld.com@lungfish.ntlworld.com>; Sun, 24 Mar 2002 14:28:46 +0000 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.3) with ESMTP id g2OESij07275; Sun, 24 Mar 2002 14:28:44 GMT (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g2OESio02871; Sun, 24 Mar 2002 14:28:44 GMT (envelope-from scott) Date: Sun, 24 Mar 2002 14:28:44 +0000 From: Scott Mitchell To: Malan Joubert , g@tuatara.goatsucker.org Cc: freebsd-questions@FreeBSD.ORG Subject: Re: windows printer from FreeBSD Message-ID: <20020324142844.A281@fishballoon.dyndns.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from malan_joubert@hotmail.com on Sun, Mar 24, 2002 at 10:32:57AM +0200 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Mar 24, 2002 at 10:32:57AM +0200, Malan Joubert wrote: > How do you print to a windows printer from FreeBSD? > I want to print high quility pcb files from a cad design package... > Is this possible? > The windows machine is running windows XP... > Thanx very much > Malan Hi Malan, The apsfilter package (print/apsfilter) -- highly recommended for any kind of printing from FreeBSD -- will print to any printer accessible to Samba, which it will install for you if you don't have it already. Setup was a bit fiddly the first time I did it; I won't try to offer any specific advice, since it depends very much on how your network is set up. You will need to have a printer that apsfilter could print to if it was directly connected to the FreeBSD machine -- effectively a real PostScript printer or one that Ghostscript has a driver for. That covers most things you're likely to encounter except for Winprinters, but you probably have a real printer for the kind of output you're producing :-) I believe Ghostscript has a driver that will allow it to print to *any* Windows-supported printer, but last time I looked, only if Ghostscript is running on the Windows machine. It would be very cool if this worked remotely as well, so yo umigt want to look into that as well. Cheers, Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 6:44:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ettnet.se (mail.ettnet.se [212.109.4.7]) by hub.freebsd.org (Postfix) with SMTP id A33B837B417 for ; Sun, 24 Mar 2002 06:44:16 -0800 (PST) Received: (qmail 17220 invoked from network); 24 Mar 2002 14:44:13 -0000 Received: from unknown (HELO ppp-212-109-5-13) (212.109.5.13) by mail.ettnet.se with SMTP; 24 Mar 2002 14:44:13 -0000 From: Thomas Widlumdh Reply-To: tw@ettnet.se To: freebsd-questions@FreeBSD.ORG Subject: Promt Date: Sun, 24 Mar 2002 15:39:37 +0100 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <02032415452000.00260@ppp-212-.ettnet.se> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I use to login as root on "Alt+F1" and as user on "Alt+F2". I connect the internet from the user. Whole of a sudden, sometimes, the root prompt is changed from an ordinary # to "ppp-212-#" Why is that? From where does the prompt get it's name? Anybody knows? Thanks in advance, Thomas -- Operativsystem: FreeBSD 4.1 E-mailprogram: Kmail 1.0.28 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 7: 1:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web12802.mail.yahoo.com (web12802.mail.yahoo.com [216.136.174.37]) by hub.freebsd.org (Postfix) with SMTP id C858A37B417 for ; Sun, 24 Mar 2002 07:01:25 -0800 (PST) Message-ID: <20020324150125.59248.qmail@web12802.mail.yahoo.com> Received: from [209.188.66.29] by web12802.mail.yahoo.com via HTTP; Sun, 24 Mar 2002 07:01:25 PST Date: Sun, 24 Mar 2002 07:01:25 -0800 (PST) From: Dave Banning Subject: dns and bind question To: questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am attempting to host out of my home. I have now a static address and I can access my site via the ip address. My problem comes in when I want to direct my domain name to my ip address. My particular registrar actually wants a "name server" address to register rather than an IP address. I understand that the name server keeps track of my IP address. I would like to use my one box to be all of; name server: ns1.skytrackercanada.com host for : www.skytrackercanada.com virtual host for: www.someoneelse.com I just don't understand why this is a two step process; Why can't my domain name just be mapped _directly_ to my IP address? Why does the name server have to get in between? __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards® http://movies.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 7: 7:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dns2.s.bonet.se (dns2.s.bonet.se [212.181.54.3]) by hub.freebsd.org (Postfix) with ESMTP id D9C9337B400 for ; Sun, 24 Mar 2002 07:07:15 -0800 (PST) Received: from there (as9-2-1.bi.s.bonet.se [217.215.7.177]) by dns2.s.bonet.se (8.11.2/8.9.3) with SMTP id g2OF02U62813 for ; Sun, 24 Mar 2002 16:00:03 +0100 (CET) (envelope-from peo@intersonic.se) Message-Id: <200203241500.g2OF02U62813@dns2.s.bonet.se> Content-Type: text/plain; charset="iso-8859-15" From: Per olof Ljungmark Organization: Intersonic AB To: freebsd-questions@FreeBSD.ORG Subject: Switching between kernels Date: Sun, 24 Mar 2002 16:07:13 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Due to a problem with ES1370 not working with SMP kernels (there is a pr) i need to switch between a SMP kernel and a PCM kernel. Question: Can I just eboot and load the appropriate kernel or must I do a build/installkernel each time? Everything else is equal between configurations. Thanks, To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 7:13: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id C77E737B400 for ; Sun, 24 Mar 2002 07:12:55 -0800 (PST) Received: from d.tracker (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g2OFCh324445 for ; Sun, 24 Mar 2002 10:12:43 -0500 Received: (from david@localhost) by d.tracker (8.11.6/8.11.3) id g2O6OrO14874; Sun, 24 Mar 2002 01:24:53 -0500 (EST) (envelope-from david) Date: Sun, 24 Mar 2002 01:24:52 -0500 From: David Banning To: Frank Merrow Cc: freebsd-questions@freebsd.org Subject: Re: Palm Pilot Development on FreeBSD? Message-ID: <20020324012452.A14866@sympatico.ca> References: <5.1.0.14.0.20020323220317.00a39cb0@pop-server.san.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <5.1.0.14.0.20020323220317.00a39cb0@pop-server.san.rr.com>; from fmerrow@san.rr.com on Sat, Mar 23, 2002 at 10:05:09PM -0800 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Mar 23, 2002 at 10:05:09PM -0800, Frank Merrow wrote: > What is the status of Palm Pilot Development on FreeBSD? (if any) > > Are there any tools at all? If so, how do they compare in robustness with > the Win32 tools? > > Will the emulators work on any of the Unix Flavors? Check out http://www.freebsd.org/ports/palm.html I use jpilot a my replacement for the Palm Windows system which is adequate but not quite as good. The other utilities in the ports I really enjoy for creating batch files to send web pages to my palm for reading later. I have other batch files set up to send text files to my palm and back, for maintaining my daily log. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 7:13: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 24ACD37B41B for ; Sun, 24 Mar 2002 07:12:56 -0800 (PST) Received: from d.tracker (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g2OFCh324448 for ; Sun, 24 Mar 2002 10:12:43 -0500 Received: (from david@localhost) by d.tracker (8.11.6/8.11.3) id g2O5Hsl14603 for questions@freebsd.org; Sun, 24 Mar 2002 00:17:54 -0500 (EST) (envelope-from david) Date: Sun, 24 Mar 2002 00:17:53 -0500 From: David Banning To: questions@freebsd.org Subject: dns bind question Message-ID: <20020324001753.A14567@sympatico.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am attempting to host out of my home. I have now a static address and I can access my site via the ip address. My problem comes in when I want to direct my domain name to my ip address. My particular registrar actually wants a "name server" address to register rather than an IP address. I understand that the name server keeps track of my IP address. I would like to use my one box to be all of; name server: ns1.skytrackercanada.com host for : www.skytrackercanada.com virtual host for: www.someoneelse.com I just don't understand why this is a two step process; Why can't my domain name just be mapped _directly_ to my IP address? Why does the name server have to get in between? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 7:13: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from www.clubplus.net (ns1.clubplus.net [216.191.22.194]) by hub.freebsd.org (Postfix) with ESMTP id 8B7EC37B404 for ; Sun, 24 Mar 2002 07:13:00 -0800 (PST) Received: from d.tracker (cust29.209.188.66.dsl.accessv.com [209.188.66.29] (may be forged)) by www.clubplus.net (8.11.4/8.11.1) with ESMTP id g2OFCg324441 for ; Sun, 24 Mar 2002 10:12:43 -0500 Received: (from david@localhost) by d.tracker (8.11.6/8.11.3) id g2O6ls115003 for questions@freebsd.org; Sun, 24 Mar 2002 01:47:54 -0500 (EST) (envelope-from david) Date: Sun, 24 Mar 2002 01:47:54 -0500 From: David Banning To: questions@freebsd.org Subject: dns bind question Message-ID: <20020324014754.A14999@d.tracker> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am attempting to host out of my home. I have now a static address and I can access my site via the ip address. My problem comes in when I want to direct my domain name to my ip address. My particular registrar actually wants a "name server" address to register rather than an IP address. I understand that the name server keeps track of my IP address. I would like to use my one box to be all of; name server: ns1.skytrackercanada.com host for : www.skytrackercanada.com virtual host for: www.someoneelse.com Can I do this? I just don't understand why this is a two step process; Why can't my domain name just be mapped _directly_ to my IP address? Why does the name server have to get in between? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 7:39:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.xtraxion.com (e134174.upc-e.chello.nl [213.93.134.174]) by hub.freebsd.org (Postfix) with ESMTP id 431E237B400 for ; Sun, 24 Mar 2002 07:39:37 -0800 (PST) Received: from xp (xp.xtraxion.com [10.0.0.3]) by ns1.xtraxion.com (8.12.2/8.12.2) with SMTP id g2OFg5SD013531 for ; Sun, 24 Mar 2002 16:42:06 +0100 (CET) From: "Rick Hoppe" To: Subject: FreeBSD base ftp client does not support PASV Date: Sun, 24 Mar 2002 16:39:34 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, This weekend I learned that the ftp client that comes with FreeBSD does not support passive mode (PASV) but always uses extended passive mode (EPSV). Even when you use 'ftp -p' or 'pftp' to force passive mode, when you do a tcpdump, the ftp client submittes a EPSV command. This is problematic when you use a firewall with restrictive outbound connections, like I do. In that case you need a ftp proxy that handles EPSV or otherwise a third-party ftp client that supports PASV. I learned that IPNAT's proxy does not handle EPSV, so that's the reason why the ftp client doesn't work here. I simply get a connection refused. What I do not understand is that, although the man page for the ftp client /usr/bin/ftp says it supports passive ftp, it just don't. Is it a documentation problem, or a programming issue? Below you can find a part of the tcpdump output when issuing a 'ftp -p ftp://ftp.freebsd.org' from a FreeBSD 4.-5R system. Regards, Rick Hoppe Network- and Systemspecialist Xtraxion Internet 16:29:42.510419 xxxxxxx.xxxxxxxx.xxx.2746 > ftp.beastie.tdk.net.ftp: P 58:64(6) ack 1227 win 33304 (DF) [tos 0x10] 0x0000 4510 003a 5ace 4000 4006 4eb9 0a00 0002 E..:Z.@.@.N..... 0x0010 3ef3 4832 0aba 0015 cdaa 7080 eaec f63c >.H2......p....< 0x0020 8018 8218 6f76 0000 0101 080a 0238 e8bc ....ov.......8.. 0x0030 0169 37c7 4550 5356 0d0a .i7.EPSV.. 16:29:42.585108 ftp.beastie.tdk.net.ftp > xxxxxxx.xxxxxxxx.xxx.2746: P 1227:1275(48) ack 64 win 33304 (DF) [tos 0x10] 0x0000 4510 0064 fc49 4000 3106 bc13 3ef3 4832 E..d.I@.1...>.H2 0x0010 0a00 0002 0015 0aba eaec f63c cdaa 7086 ...........<..p. 0x0020 8018 8218 0196 0000 0101 080a 0169 37cf .............i7. 0x0030 0238 e8bc 3232 3920 456e 7465 7269 6e67 .8..229.Entering 0x0040 2045 7874 656e 6465 6420 5061 7373 6976 .Extended.Passiv 0x0050 6520 4d6f 6465 2028 7c7c 7c35 3033 3033 e.Mode.(|||50303 0x0060 7c29 0d0a |).. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:20:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 951CF37B41B for ; Sun, 24 Mar 2002 08:20:07 -0800 (PST) Received: (qmail 240 invoked from network); 24 Mar 2002 16:13:25 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 16:13:25 -0000 Message-ID: <3C9DFB65.8000503@cream.org> Date: Sun, 24 Mar 2002 16:14:29 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: Gerard Cc: freebsd-questions@freebsd.org Subject: Re: My mailserver and freebsd... References: <20020324062121.36771.qmail@web13105.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Gerard wrote: >Well one of my main reasons for setting up my own mail server was to >get back into the 'list' at freebsd.org. >Unfortunately, Im unable to post to any of them. >I successfully subscribed with my new email address. >I came across something from a google search about freebsd.org blocking >'suspect' mailservers due to a misconfiguration or something like that. >Is there a page that describes this, so Ill know what needs to be done >to overcome my handicap. > Try searching -chat or other lists from www.freebsd.org/search - this has been discussed _many_ times. Basically, the most popular reason for the freebsd.org server not accepting your e-mail is due to your mail server not having a reverse-dns name. If this is the case with your ISP's server, then you should complain because it is a broken setup. So long as reverse-dns works, freebsd.org will more then likely accept your mail. Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:25:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta05-svc.ntlworld.com (mta05-svc.ntlworld.com [62.253.162.45]) by hub.freebsd.org (Postfix) with ESMTP id 9391B37B419 for ; Sun, 24 Mar 2002 08:25:32 -0800 (PST) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta05-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020324162527.GFRJ7206.mta05-svc.ntlworld.com@lungfish.ntlworld.com>; Sun, 24 Mar 2002 16:25:27 +0000 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.3) with ESMTP id g2OGPQj07587; Sun, 24 Mar 2002 16:25:27 GMT (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g2OGPPg03668; Sun, 24 Mar 2002 16:25:25 GMT (envelope-from scott) Date: Sun, 24 Mar 2002 16:25:25 +0000 From: Scott Mitchell To: David Banning Cc: questions@FreeBSD.ORG Subject: Re: dns bind question Message-ID: <20020324162525.B281@fishballoon.dyndns.org> References: <20020324001753.A14567@sympatico.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20020324001753.A14567@sympatico.ca>; from david@skytrackercanada.com on Sun, Mar 24, 2002 at 12:17:53AM -0500 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Mar 24, 2002 at 12:17:53AM -0500, David Banning wrote: > > I am attempting to host out of my home. I have now a static address > and I can access my site via the ip address. My problem comes in > when I want to direct my domain name to my ip address. > > My particular registrar actually wants a "name server" address > to register rather than an IP address. I understand that the name server > keeps track of my IP address. I would like to use my one box to be all > of; > > name server: ns1.skytrackercanada.com > host for : www.skytrackercanada.com > virtual host for: www.someoneelse.com > > I just don't understand why this > is a two step process; Why can't my domain name just be mapped > _directly_ to my IP address? Why does the name server have to > get in between? That mapping from your domain --> your IP address needs to be stored *somewhere*. That's what the nameservers are for... Your machine can certainly be one of the nameservers for your domain, if that's what you want. Just run BIND (or djbdns, or your favourite DNS server) on it and give the IP to your registrar. However, you're supposed to have two nameservers for a domain, on separate networks (so that whatever breaks, at least one of them should be reachable). Probably your registrar or ISP will this, for a fee, or check out dyndns.org, who do primary and/or secondary name service for a one-off $30 donation. HTH, Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:29:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta1n.bluewin.ch (mta1n.bluewin.ch [195.186.1.210]) by hub.freebsd.org (Postfix) with ESMTP id D8AD837B419 for ; Sun, 24 Mar 2002 08:29:22 -0800 (PST) Received: from saturn.spectraweb.ch (213.3.86.127) by mta1n.bluewin.ch (Bluewin AG 6.0.040) id 3C99F51E0012DAE1 for freebsd-questions@freebsd.org; Sun, 24 Mar 2002 17:29:21 +0100 Received: (from martin@localhost) by saturn.spectraweb.ch (8.11.6/8.11.6) id g2OGSSf01912 for freebsd-questions@freebsd.org; Sun, 24 Mar 2002 17:28:28 +0100 (CET) (envelope-from pcservi@spectraweb.ch) Date: Sun, 24 Mar 2002 17:28:22 +0100 From: Martin Schweizer To: freebsd-questions@freebsd.org Subject: Samba and adduser and '$' Message-ID: <20020324172822.A1879@spectraweb.ch> Reply-To: Martin Schweizer Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello System: FreeBSD 4.5 STABLE, Samba 2.2.3a I want to join my Windows 2000 box to my Samba server. Samba works with my Win9x boxes fine (also with login scripts). How do I create an user account like USERACCOUNT$ with adduser? If I start adduser he won't the sign '$' at the end of the user account. What do I wrong? -- Regards Martin Schweizer PC-Service M. Schweizer; Gewerbehaus Schwarz; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:31: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta05-svc.ntlworld.com (mta05-svc.ntlworld.com [62.253.162.45]) by hub.freebsd.org (Postfix) with ESMTP id 7F69E37B400 for ; Sun, 24 Mar 2002 08:30:53 -0800 (PST) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta05-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020324163052.GIHB7206.mta05-svc.ntlworld.com@lungfish.ntlworld.com>; Sun, 24 Mar 2002 16:30:52 +0000 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.3) with ESMTP id g2OGUqj07611; Sun, 24 Mar 2002 16:30:52 GMT (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g2OGUqu03731; Sun, 24 Mar 2002 16:30:52 GMT (envelope-from scott) Date: Sun, 24 Mar 2002 16:30:52 +0000 From: Scott Mitchell To: Per olof Ljungmark Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Switching between kernels Message-ID: <20020324163052.C281@fishballoon.dyndns.org> References: <200203241500.g2OF02U62813@dns2.s.bonet.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200203241500.g2OF02U62813@dns2.s.bonet.se>; from peo@intersonic.se on Sun, Mar 24, 2002 at 04:07:13PM +0100 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Mar 24, 2002 at 04:07:13PM +0100, Per olof Ljungmark wrote: > Due to a problem with ES1370 not working with SMP kernels (there is a pr) i > need to switch between a SMP kernel and a PCM kernel. > > Question: Can I just eboot and load the appropriate kernel or must I do a > build/installkernel each time? Everything else is equal between > configurations. As long as the kernels are installed where the loader can find them (which I guess means on the root partition), you can tell the loader to load & boot whatever kernel you want. No need to rebuild or reinstall anything. Just hit a key to break out of the autoboot countdown, then: boot kernel.PCM or whatever you called the alternative kernel. Cheers, Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:31:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by hub.freebsd.org (Postfix) with ESMTP id 38D8C37B42F for ; Sun, 24 Mar 2002 08:31:17 -0800 (PST) Received: from Alex ([213.10.151.186]) by smtp05.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GTHKK302.DXU; Sun, 24 Mar 2002 17:31:15 +0100 Date: Sun, 24 Mar 2002 17:31:10 +0100 From: Alex X-Mailer: The Bat! (v1.53d) Reply-To: Alex X-Priority: 3 (Normal) Message-ID: <11416158544.20020324173110@dds.nl> To: David Banning Cc: freebsd-questions@freebsd.org Subject: Re: dns bind question In-Reply-To: <20020324014754.A14999@d.tracker> References: <20020324014754.A14999@d.tracker> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello David, Sunday, March 24, 2002, 7:47:54 AM, you wrote: DB> I am attempting to host out of my home. I have now a static address DB> and I can access my site via the ip address. My problem comes in DB> when I want to direct my domain name to my ip address. A domain can not be mapped to a ip address. A hostname + domainname points to a ip adress. DB> My particular registrar actually wants a "name server" address DB> to register rather than an IP address. I understand that the name server DB> keeps track of my IP address. I would like to use my one box to be all DB> of; DB> name server: ns1.skytrackercanada.com DB> host for : www.skytrackercanada.com DB> virtual host for: www.someoneelse.com DB> Can I do this? You have let the nameserver of someoneelse.com to translate that ip to your address. Or have www to forward the request to you. DB> I just don't understand why this DB> is a two step process; Why can't my domain name just be mapped DB> _directly_ to my IP address? Why does the name server have to DB> get in between? Your domain skytrackercanada.com can have multiple subdomains and hosts. This would be imposible without a nameserver. -- Best regards, Alex mailto:freebsd@akruijff.dds.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:32: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 7FEBE37B404 for ; Sun, 24 Mar 2002 08:31:54 -0800 (PST) Received: (qmail 207 invoked from network); 24 Mar 2002 16:03:51 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 16:03:51 -0000 Message-ID: <3C9DF927.4070105@cream.org> Date: Sun, 24 Mar 2002 16:04:55 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: Cliff Sarginson Cc: FreeBSD-questions@FreeBSD.org Subject: Re: So long and thanks for all the fish References: <20020323042842.GI9544@raggedclown.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Cliff Sarginson wrote: >Ok, >Since I have been cracked. >I have been told it was because I run an anon ftp server, even though >said server is not plugged in. And has not been plugged in for weeks. >No-one believes a word I say about the secure shell. >That there is a security hole in it. >Since I get told off for using the word arsehole, but it seems to be ok >for people to call me a Nazi. >I am retiring from the scene for a while. >Apparently I need to rebuild my network. >I doubt I will be missed. > No-one wants to see anybody leave the FreeBSD community! Was this sshd hole discussed on security@freebsd.org? That is were the security-meisters hang out, and I'm sure that they want/need to hear from you and about the problems that you're having. Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:34:28 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 702EE37B400 for ; Sun, 24 Mar 2002 08:34:21 -0800 (PST) Received: (qmail 225 invoked from network); 24 Mar 2002 16:07:39 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 16:07:39 -0000 Message-ID: <3C9DFA0B.50105@cream.org> Date: Sun, 24 Mar 2002 16:08:43 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: Mike Meyer Cc: gary , freebsd-questions@freebsd.org Subject: Re: USB HP printer References: <20020323091526.O324-100000@gary.wa5qjh.net> <15517.28002.624318.778769@guru.mired.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Mike Meyer wrote: > >It should be listed in the dmesg output. If it doesn't list the device >as ulpt0, but lists it as a ugen device, you've got some work ahead of >you to make it work. > Or try the usbdevs command. For what its worth, my HP 990Cxi was recognised as ulpt0 and prints perfectly using print /apsfilter Andrew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:36:44 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dannyboy.worksforfood.com (pool-207-68-84-222.char.east.verizon.net [207.68.84.222]) by hub.freebsd.org (Postfix) with ESMTP id B8DB937B41B for ; Sun, 24 Mar 2002 08:36:40 -0800 (PST) Received: by dannyboy.worksforfood.com (Postfix, from userid 1000) id 5D40D5A549; Sun, 24 Mar 2002 11:36:38 -0500 (EST) Date: Sun, 24 Mar 2002 11:36:38 -0500 From: Daniel Harris To: Martin Schweizer Cc: freebsd-questions@freebsd.org Subject: Re: Samba and adduser and '$' Message-ID: <20020324113638.A43366@dannyboy.worksforfood.com> References: <20020324172822.A1879@spectraweb.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <20020324172822.A1879@spectraweb.ch>; from pcservi@spectraweb.ch on Sun, Mar 24, 2002 at 05:28:22PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Mar 24, 2002 at 05:28:22PM +0100, Martin Schweizer wrote: > I want to join my Windows 2000 box to my Samba server. Samba works with my > Win9x boxes fine (also with login scripts). How do I create an user account > like USERACCOUNT$ with adduser? If I start adduser he won't the sign '$' > at the end of the user account. What do I wrong? Use vipw to manually add the $ sign to the password file. -- Daniel Harris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:43: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp07.wxs.nl (smtp07.wxs.nl [195.121.6.39]) by hub.freebsd.org (Postfix) with ESMTP id F292A37B417 for ; Sun, 24 Mar 2002 08:42:53 -0800 (PST) Received: from Alex ([213.10.151.186]) by smtp07.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GTHL3F02.CCO; Sun, 24 Mar 2002 17:42:51 +0100 Date: Sun, 24 Mar 2002 17:42:45 +0100 From: Alex X-Mailer: The Bat! (v1.53d) Reply-To: Alex X-Priority: 3 (Normal) Message-ID: <15116854445.20020324174245@dds.nl> To: Martin Schweizer Cc: freebsd-questions@freebsd.org, Martin Schweizer Subject: Re: Samba and NT+/95+ was:[Samba and adduser and '$'] In-Reply-To: <20020324172822.A1879@spectraweb.ch> References: <20020324172822.A1879@spectraweb.ch> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Martin, Sunday, March 24, 2002, 5:28:22 PM, you wrote: MS> Hello MS> System: FreeBSD 4.5 STABLE, Samba 2.2.3a MS> I want to join my Windows 2000 box to my Samba server. Samba works with my MS> Win9x boxes fine (also with login scripts). This is because NT+ expects to have encryted passwords. In the documantion was written that it is not safe to send these passwords over internet! Try adding this to you conf file in the global section: encrypt passwords = Yes -- Best regards, Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:43:13 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 4207637B419 for ; Sun, 24 Mar 2002 08:42:57 -0800 (PST) Received: (qmail 160 invoked from network); 24 Mar 2002 15:42:49 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 15:42:49 -0000 Message-ID: <3C9DF439.3050305@cream.org> Date: Sun, 24 Mar 2002 15:43:53 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: =?ISO-8859-1?Q?Christian_Fl=FCgel?= Cc: Dillion Klein , freebsd-questions@freebsd.org Subject: Re: NTFS w/ FreeBSD dual boot References: <002301c1d326$64a30db0$594bfea9@bender> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Christian Flügel wrote: > >Do not install the freeBSD BootManager though! When prompted just select do >not install. > >Create partitions inside your freebsd slice and finish installation. > >Next time you boot your system FreeBSD will start automatically because the >FreeBSD slice is marked active. (So do not worry no win2k Data is lost. > >go to the /boot directory and copy the file boot1 onto a disk (Select boot1 >and not boot0 !!!). Start fdisk with the option -a to set the active >partition to the win2k partition. > >Boot win2k rename boot1 to Bootsect.bsd and copy the file to c:\ then edit >the file boot.ini. (It is a write-protected and hidden file) >It holds the setings for the Win2k Bootmanager. >Add the line C:\Bootsect.bsd="FreeBSD" and you are finished. > >Next Time you start your system you can choose between starting FreeBSD and >Win2k > That's an interesting method of dual-booting Christian, I presume this uses the NT Loader to select between the different OS's. I can report, however, that I had no problem using FreeBSD's boot manager to select between Win2K and FreeBSD. Perhaps this is easier for a new user? Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:44:53 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 7E96A37B419 for ; Sun, 24 Mar 2002 08:44:44 -0800 (PST) Received: (qmail 427 invoked from network); 24 Mar 2002 16:44:43 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 16:44:43 -0000 Message-ID: <3C9E02BC.5040403@cream.org> Date: Sun, 24 Mar 2002 16:45:48 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: tw@ettnet.se Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Promt References: <02032415452000.00260@ppp-212-.ettnet.se> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Thomas Widlumdh wrote: >Hi, >I use to login as root on "Alt+F1" and as user on "Alt+F2". >I connect the internet from the user. >Whole of a sudden, sometimes, the root prompt is changed >from an ordinary # to "ppp-212-#" >Why is that? >>From where does the prompt get it's name? > Its sounds like your ISP might be resetting your hostname when you connect to the net. I'm not sure, but try a 'host ' and see if it returns ppp-212-..... If that's the case, you can tell dhclient to override the hostname setting, see man dhclient or ask again on the list. Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:49: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21003.mail.yahoo.com (web21003.mail.yahoo.com [216.136.227.57]) by hub.freebsd.org (Postfix) with SMTP id C661237B404 for ; Sun, 24 Mar 2002 08:48:58 -0800 (PST) Message-ID: <20020324164858.36903.qmail@web21003.mail.yahoo.com> Received: from [24.148.65.86] by web21003.mail.yahoo.com via HTTP; Sun, 24 Mar 2002 08:48:58 PST Date: Sun, 24 Mar 2002 08:48:58 -0800 (PST) From: Rick K Subject: Re: Dell PowerEdge 1650 To: questions@freebsd.org In-Reply-To: <3C9BA9B4.5040508@unisys.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have read that the computer animation for "The Matrix" was done on a cluster of Dell machines running FreeBSD. You can still get Dell servers running Linux (but not desktops). Usually, if a system runs Linux it can run FreeBSD. --- "doug.fee@unisys.com" wrote: > Hi All, > > Does anyone know or tried to run FreeBSD on a Dell > PowerEdge 1650? I'm > pretty sure it would work, but I'm not sure about > the dual embedded > gigabit ethernet cards that come with it. I tried > to find out exactly > what they are, but to no avail. I'm thinking that > maybe it is the Intel > PRO/1000 XTs. But it is confusing since Dell offers > them as add-on > cards also. > > Any light on this issue would be greatly appreciated > since I'm > considering buying 7 of them... > > Thanks, > Doug Fee > Network Design Engineer > Unisys Corporation > doug.fee@unisys.com > 502-226-2143 > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards® http://movies.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:49:14 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 21E8737B404 for ; Sun, 24 Mar 2002 08:49:06 -0800 (PST) Received: (qmail 177 invoked from network); 24 Mar 2002 15:49:04 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 15:49:04 -0000 Message-ID: <3C9DF5B1.8010808@cream.org> Date: Sun, 24 Mar 2002 15:50:09 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: Gerard Cc: freebsd-questions@freebsd.org Subject: Re: qmail maybe ?? References: <20020323235713.28926.qmail@web13106.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Gerard wrote: >Ok, I was running it off inetd. >I guess its time to grow up to tcpserver. >Wish me luck > >--- Mike Roest wrote: > >>If you're using tcpserver to run the smtp daemon you need to ensure >>that >>the IP of the workstation is in your tcpserver rules set >>Ie you should have a file like tcp.smtp and you need to add a line >>like >>:allow,RELAYCLIENT="" >> >>Then run the command >>tcprules tcp.smtp.cdb tcp.smtp.temp < tcp.smtp >> >>This will rebuild the data base. This should allow your workstation >>to >>send to any domain without them being in the rcpthosts file >> You don't need to use tcpserver in order to do this. I'm running qmail off inetd as a mail relay with no problems. Now that our inetd uses tcpwrappers it offers identical functionality. All you need to do is put a line like : tcp-env: 127.0.0.1, 192.168.: setenv = RELAYCLIENT where 127.0.0.1 and 192.168. are the IPs of machines (or networks) that you want to be able to relay through you, into /etc/hosts.allow. Then HUP inetd and you'll find it all works swimmingly! :-) Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:49:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp07.wxs.nl (smtp07.wxs.nl [195.121.6.39]) by hub.freebsd.org (Postfix) with ESMTP id C393A37B417 for ; Sun, 24 Mar 2002 08:49:08 -0800 (PST) Received: from Alex ([213.10.151.186]) by smtp07.wxs.nl (Netscape Messaging Server 4.15) with ESMTP id GTHLDU00.ECL; Sun, 24 Mar 2002 17:49:06 +0100 Date: Sun, 24 Mar 2002 17:49:00 +0100 From: Alex X-Mailer: The Bat! (v1.53d) Reply-To: Alex X-Priority: 3 (Normal) Message-ID: <7417229003.20020324174900@dds.nl> To: Peter Leftwich Cc: Stanley Chan , FreeBSD Questions Subject: Re[2]: how to restrict the telnet In-Reply-To: <20020324044524.G32288-100000@earl-grey.cloud9.net> References: <20020324044524.G32288-100000@earl-grey.cloud9.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Peter, Sunday, March 24, 2002, 10:49:39 AM, you wrote: PL> On Sun, 24 Mar 2002, Stanley Chan wrote: >> Dear sir, I am using the FreeBSD 4.3 to run my webserver. Can you >> tell me how can I restrict anyone telnet to my machine except me. You can use a firewall for this, if you are ok with on machine basis. (man ipfw or man ipf) On a site note: Please set you mailer to break your lines somewhere near 72 char per line. PL> You could run the daemon (binary, application) known as telnetd or have it PL> run itself on-demand via inetd (type `man inetd` for more information) but PL> you must be aware, telnet is not very secure. At all. ;) If you are on a local intranet and you trust you users the securty lack of telnet will not be much of an issue. -- Best regards, Alex mailto:freebsd@akruijff.dds.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 8:49:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from main.g-networks.net (main.g-networks.net [66.33.109.28]) by hub.freebsd.org (Postfix) with ESMTP id 64AE537B47C for ; Sun, 24 Mar 2002 08:49:48 -0800 (PST) Received: from localhost (localhost.localdomain [127.0.0.1]) by main.g-networks.net (Postfix) with ESMTP id 92C3D7F480 for ; Sun, 24 Mar 2002 09:56:34 -0500 (EST) Received: by main.g-networks.net (Postfix, from userid 1277) id A92EE7F57F; Sun, 24 Mar 2002 09:56:33 -0500 (EST) Received: from localhost (localhost [127.0.0.1]) by main.g-networks.net (Postfix) with ESMTP id A2B027F480 for ; Sun, 24 Mar 2002 09:56:33 -0500 (EST) Date: Sun, 24 Mar 2002 09:56:33 -0500 (EST) From: Rodolfo Gonzalez X-X-Sender: rodolfo@main.g-networks.net To: freebsd-questions@freebsd.org Subject: Wrong hard disk size reported in Fdisk. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Virus-Scanned: by Global Networks Technologies Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello, I'm trying to install FreeBSD 4.5 in a 13 Gb. Maxtor HD model 91303D6 in a VIA KX133 based AMD K7 750Mhz computer. The HD is in ide0 master, and it has already two primary partitions with Mandrake 8.2, as follows: /boot = /dev/hda1 (32 Mb), / = /dev/hda2 (7168 Mb). The space lefting is without partitions. The problem is that Fdisk (and the FreeBSD kernel, when it boots) report just 2048 Mb in this HD, and if I change the disk geometry in FreeBSD's Fdisk, it doesn't get all the space, it continues reporting just 2048 Mb for the hard drive. Am I doing something wrong?. Thanks in advance, Rodolfo. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9: 4:11 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc53.attbi.com (rwcrmhc53.attbi.com [204.127.198.39]) by hub.freebsd.org (Postfix) with ESMTP id 4E25937B417 for ; Sun, 24 Mar 2002 09:04:06 -0800 (PST) Received: from attbi.com ([12.252.56.235]) by rwcrmhc53.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020324170406.VQJN2951.rwcrmhc53.attbi.com@attbi.com> for ; Sun, 24 Mar 2002 17:04:06 +0000 Message-ID: <3C9E06E7.6030909@attbi.com> Date: Sun, 24 Mar 2002 10:03:36 -0700 From: Aaron Siegel User-Agent: Mozilla/5.0 (X11; U; Linux i386; en-US; rv:0.9.4) Gecko/20011126 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions Subject: Re: Star/Open office References: <02032408161600.05110@ppp-212-109-5-70> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Tomas you are going to have to upgrade your ports collection. There are two methods you can use. The slickest method is to use cvsup, the procedure is outlined in the handbook. See the following link. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html The other method is to download the port tar ball from the ftp site. Here is a link to the 4.5 release version ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/4.5-RELEASE/ports You should think about upgrading to 4.5, it is easier than it looks. Thomas Widlumdh wrote: >HI, >Well, I have to admit I don't manage this. I've read the handbook on >ports, etc., but.... > >I'm running fBSD 4.1. >In the ports on my machine there is a staroffice 5.1 in the editors dir. >But the program will be fetched from the internet, of course. >And there is no Staroffice on the dist. CD. > >I'd like to install Staroffice 5.2 (or perhaps open office). >But how? >On the free BSD site they are, but I have no clue of how to download >it/them. >I seem to come to a dir with a lot of files, the Makefile, DESCR-file >and a directory filled with a lot of files. Should I download these >files, one by one? Is there no way of downloading all in the same >time, like from the ports dir in my machine? > >Well, perhaps I'm more stupid than people in general? >Anyway, thanks in advance for all the answers I hopefully receive on >this matter. >Regards >Thomas > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9: 6:16 2002 Delivered-To: freebsd-questions@freebsd.org Received: from out020.verizon.net (out020pub.verizon.net [206.46.170.176]) by hub.freebsd.org (Postfix) with ESMTP id 7EFA637B400 for ; Sun, 24 Mar 2002 09:06:11 -0800 (PST) Received: from verizon.net ([141.157.161.99]) by out020.verizon.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with ESMTP id <20020324170610.MTQH5495.out020.verizon.net@verizon.net>; Sun, 24 Mar 2002 11:06:10 -0600 Message-ID: <3C9E0754.2010104@verizon.net> Date: Sun, 24 Mar 2002 12:05:24 -0500 From: Simon Morton Reply-To: smorton@acm.org User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en,pdf,zh-CN,de-DE,zh-TW,zh, zh- MIME-Version: 1.0 To: Steven Lake Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Showing Uptime Via webpage References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Steven Lake wrote: > Hi all. Just a curiousity question. If I wanted to have a > special hidden page which showed me all of the current processes, total > uptime, list of last logins, or other things like that which automatically > refreshed each time I reloaded the page, how would I do that? Do I make a > perl script for that, or can I do it directly through Apache? Kinda > curious about this cause it would be nice if I could do that. If you just want the basics, the following perl script will do the trick: #!/usr/bin/perl print "Content-type: text/plain\n\n"; system ("uptime"); exit; Put it in your cgi-bin directory, name it uptime, make it executable by httpd, and you are all set. Access it as http://your.server/cgi-bin/uptime. Of course you can do this with other commands and, depending on your perl and HTML skills, make it as fancy as you want. hth simon -- http://www.SimonMorton.com smorton at acm dot org "Money couldn't buy friends but you got a better class of enemy." Spike Milligan (1918-2002) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:10: 7 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailout02.sul.t-online.com (mailout02.sul.t-online.com [194.25.134.17]) by hub.freebsd.org (Postfix) with ESMTP id 71DF337B404 for ; Sun, 24 Mar 2002 09:10:00 -0800 (PST) Received: from fwd06.sul.t-online.de by mailout02.sul.t-online.com with smtp id 16pAVq-0005hD-08; Sun, 24 Mar 2002 17:06:30 +0100 Received: from there (320071886283-0001@[217.235.119.156]) by fmrl06.sul.t-online.com with smtp id 16pAVo-1klfP6C; Sun, 24 Mar 2002 17:06:28 +0100 Content-Type: text/plain; charset="iso-8859-15" From: Thomas =?iso-8859-15?q?W=FCrfl?= To: freebsd-questions@freebsd.org Subject: Re: usb mass storage problems Date: Sun, 24 Mar 2002 17:07:33 +0100 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-ID: <16pAVo-1klfP6C@fmrl06.sul.t-online.com> X-Sender: 320071886283-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > umass0: Fujitsu Memorybird, rev 1.00/1.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: Removable Direct Access SCSI-0 device > da0: 650KB/s transfers > da0: 15MB (32000 512 byte sectors: 64H 32S/T 15C)> try to mount: > > try to mount: > snorry# mount -t msdos /dev/da0s1 /disk2 > (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1 0 > (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,0 > (da0:umass-sim0:0:0:0): Invalid command operation code > da0: reading primary partition table: error reading fsbn 0 > msdos: /dev/da0s1: Input/output error > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 > 0 0 1 0 > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST > asc:20,0 > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): Invalid command > operation code > Mar 23 04:24:54 snorry /kernel: da0: reading primary partition table: > error reading fsbn 0 > snorry# i have found something very similar at: http://www.FreeBSD.org/cgi/query-pr.cgi?pr=34205 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:28: 9 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 8F6FA37B400 for ; Sun, 24 Mar 2002 09:28:04 -0800 (PST) Received: (qmail 486 invoked from network); 24 Mar 2002 17:28:03 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 17:28:03 -0000 Message-ID: <3C9E0CE4.7070605@cream.org> Date: Sun, 24 Mar 2002 17:29:08 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: Scott Mitchell Cc: David Banning , questions@FreeBSD.ORG Subject: Re: dns bind question References: <20020324001753.A14567@sympatico.ca> <20020324162525.B281@fishballoon.dyndns.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Scott Mitchell wrote > >Your machine can certainly be one of the nameservers for your domain, if >that's what you want. Just run BIND (or djbdns, or your favourite DNS >server) on it and give the IP to your registrar. However, you're supposed >to have two nameservers for a domain, on separate networks (so that >whatever breaks, at least one of them should be reachable). Probably your >registrar or ISP will this, for a fee, or check out dyndns.org, who do >primary and/or secondary name service for a one-off $30 donation. > Or zoneedit.com who will do secondary DNS for free! :-) Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:28:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailout03.sul.t-online.com (mailout03.sul.t-online.com [194.25.134.81]) by hub.freebsd.org (Postfix) with ESMTP id D7A1D37B417; Sun, 24 Mar 2002 09:28:03 -0800 (PST) Received: from fwd02.sul.t-online.de by mailout03.sul.t-online.com with smtp id 16pBmh-0005uc-0U; Sun, 24 Mar 2002 18:27:59 +0100 Received: from there (320071886283-0001@[217.235.119.156]) by fmrl02.sul.t-online.com with smtp id 16pBme-0Kgn9UC; Sun, 24 Mar 2002 18:27:56 +0100 Content-Type: text/plain; charset="iso-8859-15" From: Thomas =?iso-8859-15?q?W=FCrfl?= To: freebsd-questions@freebsd.org Subject: Re: usb mass storage problems Date: Sun, 24 Mar 2002 18:29:00 +0100 X-Mailer: KMail [version 1.3.2] References: <16pAVo-1klfP6C@fmrl06.sul.t-online.com> In-Reply-To: <16pAVo-1klfP6C@fmrl06.sul.t-online.com> Cc: freebsd-hackers@freebsd.org MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-ID: <16pBme-0Kgn9UC@fmrl02.sul.t-online.com> X-Sender: 320071886283-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > > umass0: Fujitsu Memorybird, rev 1.00/1.00, addr 2 > > da0 at umass-sim0 bus 0 target 0 lun 0 > > da0: Removable Direct Access SCSI-0 device > > da0: 650KB/s transfers > > da0: 15MB (32000 512 byte sectors: 64H 32S/T 15C)> try to mount: > > > > try to mount: > > snorry# mount -t msdos /dev/da0s1 /disk2 > > (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1 0 > > (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,0 > > (da0:umass-sim0:0:0:0): Invalid command operation code > > da0: reading primary partition table: error reading fsbn 0 > > msdos: /dev/da0s1: Input/output error > > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8 > > 0 0 0 1 0 > > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST > > asc:20,0 > > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): Invalid command > > operation code > > Mar 23 04:24:54 snorry /kernel: da0: reading primary partition table: > > error reading fsbn 0 > > snorry# > > i have found something very similar at: > http://www.FreeBSD.org/cgi/query-pr.cgi?pr=34205 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message I fixed the problem. I added following lines to /usr/src/sys/cam/scsi/scsi_da.c (FreeBSD-4.5RELEASE): /* Below a list of quirks for USB devices supported by umass. */ /* + * Fujitsu Siemens Memorybird + */ + {T_DIRECT, SIP_MEDIA_REMOVABLE, "Fujitsu", "Memorybird", "*"}, + /*quirks*/ DA_Q_NO_6_BYTE|DA_Q_NO_SYNC_CACHE + }, Maybe this is written in an unusual manner, but I'm an absolute newbie to freebsd and C. Sorry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:34: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lerlaptop.lerctr.org (lerlaptop.lerctr.org [207.158.72.14]) by hub.freebsd.org (Postfix) with ESMTP id 5C6BB37B417 for ; Sun, 24 Mar 2002 09:33:57 -0800 (PST) Received: (from ler@localhost) by lerlaptop.lerctr.org (8.11.6/8.11.6) id g2OHXuO17044 for freebsd-questions@freebsd.org; Sun, 24 Mar 2002 11:33:56 -0600 (CST) (envelope-from ler) Date: Sun, 24 Mar 2002 11:33:56 -0600 From: Larry Rosenman To: freebsd-questions@freebsd.org Subject: XFree86-4 port... [BROKEN??] Message-ID: <20020324173356.GA17032@lerlaptop.lerctr.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG When trying to install the XFree86-4 port (from a fresh cvsup of the ports tree), I get the following in the XFree86-4-libraries port: ===> Building for XFree86-libraries-4.2.0_1 Building Release 6.6 of the X Window System: XFree86-libraries-4.2.0 Sun Mar 24 11:31:24 CST 2002 cd ./config/imake && make -f Makefile.ini BOOTSTRAPCFLAGS="" CC="cc" clean rm -f ccimake imake.o imake rm -f *.CKP *.ln *.BAK *.bak *.o core errs ,* *~ *.a tags TAGS make.log \#* rm -f -r Makefile.proto Makefile Makefile.dep bootstrap make Makefile.boot cd ./config/imake && make -f Makefile.ini BOOTSTRAPCFLAGS="" CC="cc" making imake with BOOTSTRAPCFLAGS= in config/imake cc -o ccimake -O -I../../include -I../../imports/x11/include/X11 ccimake.c cc -c -O -I../../include -I../../imports/x11/include/X11 `./ccimake` imake.c cc -o imake -O -I../../include -I../../imports/x11/include/X11 imake.o rm -f ./config/makedepend/Makefile.proto ./config/imake/imake -I./config/cf -s ./config/makedepend/Makefile.proto -f ./config/makedepend/Imakefile -DTOPDIR=../.. -DCURDIR=./config/makedepend In file included from config/cf/site.def:58, from config/cf/Imake.tmpl:45, from Imakefile.c:13: config/cf/xf86site.def:631: warning: `InstallXdmConfig' redefined config/cf/host.def:5: warning: this is the location of the previous definition config/cf/xf86site.def:632: warning: `InstallXinitConfig' redefined config/cf/host.def:6: warning: this is the location of the previous definition config/cf/xf86site.def:633: warning: `InstallFSConfig' redefined config/cf/host.def:7: warning: this is the location of the previous definition In file included from config/cf/FreeBSD.cf:552, from config/cf/Imake.tmpl:94, from Imakefile.c:13: config/cf/xfree86.cf:14: version.def: No such file or directory In file included from config/cf/site.def:158, from config/cf/Imake.tmpl:100, from Imakefile.c:13: config/cf/host.def:5: warning: `InstallXdmConfig' redefined config/cf/xf86site.def:631: warning: this is the location of the previous definition config/cf/host.def:6: warning: `InstallXinitConfig' redefined config/cf/xf86site.def:632: warning: this is the location of the previous definition config/cf/host.def:7: warning: `InstallFSConfig' redefined config/cf/xf86site.def:637: warning: this is the location of the previous definition config/cf/host.def:10: warning: `BuildFontServer' redefined config/cf/xf86site.def:635: warning: this is the location of the previous definition ./config/imake/imake: Exit code 1. Stop. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries/work/xc. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries/work/xc. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries. *** Error code 1 Stop in /usr/ports/x11/XFree86-4-libraries. Anyone have any ideas? -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: ler@lerctr.org US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:37:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.mx.pitdc1.stargate.net (smtp1.mx.pitdc1.stargate.net [206.210.69.141]) by hub.freebsd.org (Postfix) with SMTP id F40B237B404 for ; Sun, 24 Mar 2002 09:37:45 -0800 (PST) Received: (qmail 19830 invoked from network); 24 Mar 2002 17:37:44 -0000 Received: from dap-209-166-136-196.nfas.greensburg-tnt-1.sns234.pa.stargate.net (HELO wastegate.net) (209.166.136.196) by smtp1.mx.pitdc1.stargate.net with SMTP; 24 Mar 2002 17:37:44 -0000 Received: from MOTHER (mother.wg.local [192.168.1.2]) by wastegate.net (Postfix) with ESMTP id 19A0048425; Sun, 24 Mar 2002 12:40:07 -0500 (EST) From: "Doug Reynolds" To: "Alex" , "Alex" , "David Banning" Cc: "freebsd-questions@freebsd.org" Date: Sun, 24 Mar 2002 12:34:41 -0500 Reply-To: "Doug Reynolds" X-Mailer: PMMail 2000 Professional (2.20.2472) For Windows 2000 (5.1.2600) In-Reply-To: <11416158544.20020324173110@dds.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: dns bind question Message-Id: <20020324174007.19A0048425@wastegate.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002 17:31:10 +0100, Alex wrote: >Hello David, > >Sunday, March 24, 2002, 7:47:54 AM, you wrote: > >DB> I am attempting to host out of my home. I have now a static address >DB> and I can access my site via the ip address. My problem comes in >DB> when I want to direct my domain name to my ip address. > >A domain can not be mapped to a ip address. A hostname + domainname >points to a ip adress. unless I am not understanding, it can. mine domain points directly to a domain, and everything else is cname'd to it. --- doug reynolds | the maverick | mav@wastegate.net PGP Public Key Fingerprint: 7FEC 10AA 056B F8DE AC1E 6965 FBBE 9601 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:41:23 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mgw1.MEIway.com (mgw1.meiway.com [212.73.210.75]) by hub.freebsd.org (Postfix) with ESMTP id E5FAD37B41B for ; Sun, 24 Mar 2002 09:41:19 -0800 (PST) Received: from mail.Go2France.com (ms1.meiway.com [212.73.210.73]) by mgw1.MEIway.com (Postfix Relay Hub) with ESMTP id B909516B13 for ; Sun, 24 Mar 2002 18:41:17 +0100 (CET) Received: from LenConrad.Go2France.com [66.64.14.18] by mail.Go2France.com with ESMTP (SMTPD32-6.06) id A4C416180394; Sun, 24 Mar 2002 19:02:44 +0100 Message-Id: <5.1.0.14.2.20020324113258.03b5eec8@mail.Go2France.com> X-Sender: LConrad@Go2France.com@mail.Go2France.com X-Mailer: QUALCOMM Windows Eudora Version 5.1 Date: Sun, 24 Mar 2002 11:41:13 -0600 To: freebsd-questions@freebsd.org From: Len Conrad Subject: Re: dns bind question In-Reply-To: <20020324001753.A14567@sympatico.ca> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG >I am attempting to host out of my home. I have now a static address >and I can access my site via the ip address. My problem comes in >when I want to direct my domain name to my ip address. run your own DNS as primary master NS for your hosting service. >My particular registrar actually wants a "name server" address >to register rather than an IP address. a "registered host" is technically that host's A record, entered into the TLD's nameservers. eg, in the ?.gTLD-servers.net: ns1.skytrackercanada.com. A ip.ad.re.ss Once that host is registered in the .com parents, you can delegate authority to it. The A record is referred to as "glue record". >I understand that the name server >keeps track of my IP address. I would like to use my one box to be all >of; > >name server: ns1.skytrackercanada.com >host for : www.skytrackercanada.com >virtual host for: www.someoneelse.com > >I just don't understand why this >is a two step process; Why can't my domain name just be mapped >_directly_ to my IP address? It can be and is, via the domain name service: some.domain.com A ip.ad.re.ss >Why does the name server have to get in between? Because the DNS __IS__ the database the provides the domain-name-to-ip mapping service. Len http://MenAndMice.com/DNS-training http://BIND8NT.MEIway.com : ISC BIND for NT4 & W2K http://IMGate.MEIway.com : Build free, hi-perf, anti-abuse mail gateways To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:43:20 2002 Delivered-To: freebsd-questions@freebsd.org Received: from kitkat.hotpop.com (kitkat.hotpop.com [204.57.55.30]) by hub.freebsd.org (Postfix) with ESMTP id E32AF37B420 for ; Sun, 24 Mar 2002 09:42:54 -0800 (PST) Received: from hotpop.com (unknown [204.57.55.31]) by kitkat.hotpop.com (Postfix) with SMTP id 275C330D50 for ; Sun, 24 Mar 2002 17:41:34 +0000 (UTC) Received: from afi (54.eagle.speede.com [64.39.177.54]) by zagnut.hotpop.com (Postfix) with SMTP id E191E50027; Sun, 24 Mar 2002 17:41:34 +0000 (UTC) From: "Dillion Klein" To: Cc: "Andrew Boothman" Subject: RE: NTFS w/ FreeBSD dual boot Date: Sun, 24 Mar 2002 12:41:20 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <3C9DF439.3050305@cream.org> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I used the FreeBSD Bootmanager successfully last time. But, I ran into the following problem(s) last time: C:\ Primary 5GB (NTFS) D:\ Extended 5GB w/ 5GB Logical (NTFS) Ran the FreeBSD install and ended up deleting the D: and loosing all the data (not too much, but this made me start from scratch again). So, this time I have gotten this far: C:\ Primary 5GB (NTFS) :\ (no drive letter assigned) (A FAT32 Primary partition, empty) 6.2GB D:\ Extended 5GB w/ 5GB Logical (NTFS) Now, how can I be sure when I go through the FreeBSD installation that I use and FreeBSD format the ":\" primary partition created in advance? I am using Seagate ST340016A Barracuda ATA IV 40GB hard drive. Thanks -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Andrew Boothman Sent: March 24, 2002 10:44 AM To: Christian Flügel Cc: Dillion Klein; freebsd-questions@freebsd.org Subject: Re: NTFS w/ FreeBSD dual boot Christian Flügel wrote: > >Do not install the freeBSD BootManager though! When prompted just select do >not install. > >Create partitions inside your freebsd slice and finish installation. > >Next time you boot your system FreeBSD will start automatically because the >FreeBSD slice is marked active. (So do not worry no win2k Data is lost. > >go to the /boot directory and copy the file boot1 onto a disk (Select boot1 >and not boot0 !!!). Start fdisk with the option -a to set the active >partition to the win2k partition. > >Boot win2k rename boot1 to Bootsect.bsd and copy the file to c:\ then edit >the file boot.ini. (It is a write-protected and hidden file) >It holds the setings for the Win2k Bootmanager. >Add the line C:\Bootsect.bsd="FreeBSD" and you are finished. > >Next Time you start your system you can choose between starting FreeBSD and >Win2k > That's an interesting method of dual-booting Christian, I presume this uses the NT Loader to select between the different OS's. I can report, however, that I had no problem using FreeBSD's boot manager to select between Win2K and FreeBSD. Perhaps this is easier for a new user? Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:46:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web13104.mail.yahoo.com (web13104.mail.yahoo.com [216.136.174.149]) by hub.freebsd.org (Postfix) with SMTP id 19F4037B41E for ; Sun, 24 Mar 2002 09:46:44 -0800 (PST) Message-ID: <20020324174644.66882.qmail@web13104.mail.yahoo.com> Received: from [68.39.132.244] by web13104.mail.yahoo.com via HTTP; Sun, 24 Mar 2002 09:46:44 PST Date: Sun, 24 Mar 2002 09:46:44 -0800 (PST) From: Gerard Subject: Re: qmail maybe ?? & My mailserver and freebsd... To: Andrew Boothman Cc: freebsd-questions@freebsd.org In-Reply-To: <3C9DF5B1.8010808@cream.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Well I did figure out tcpsever to get it working. Ill try the inetd way you suggest. Concerning me not being able to send mail to freebsd.org. I found a PR discussning it earlier, and yes reverse lookup doesn't match forward lookups, and unfortunately the only cable provider here (comcast) wont cooperate, so Im probably stuck. Such is life. Thanks --- Andrew Boothman wrote: > Gerard wrote: > > >Ok, I was running it off inetd. > >I guess its time to grow up to tcpserver. > >Wish me luck > > > >--- Mike Roest wrote: > > > >>If you're using tcpserver to run the smtp daemon you need to ensure > >>that > >>the IP of the workstation is in your tcpserver rules set > >>Ie you should have a file like tcp.smtp and you need to add a line > >>like > >>:allow,RELAYCLIENT="" > >> > >>Then run the command > >>tcprules tcp.smtp.cdb tcp.smtp.temp < tcp.smtp > >> > >>This will rebuild the data base. This should allow your > workstation > >>to > >>send to any domain without them being in the rcpthosts file > >> > You don't need to use tcpserver in order to do this. I'm running > qmail > off inetd as a mail relay with no problems. Now that our inetd uses > tcpwrappers it offers identical functionality. > > All you need to do is put a line like : > tcp-env: 127.0.0.1, 192.168.: setenv = RELAYCLIENT > > where 127.0.0.1 and 192.168. are the IPs of machines (or networks) > that > you want to be able to relay through you, into /etc/hosts.allow. Then > > HUP inetd and you'll find it all works swimmingly! :-) > > Andrew. > __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards® http://movies.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:53:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id 5621837B404 for ; Sun, 24 Mar 2002 09:53:48 -0800 (PST) Received: (qmail 525 invoked from network); 24 Mar 2002 17:53:46 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 17:53:46 -0000 Message-ID: <3C9E12EC.8010104@cream.org> Date: Sun, 24 Mar 2002 17:54:52 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: Dillion Klein Cc: freebsd-questions@freebsd.org Subject: Re: NTFS w/ FreeBSD dual boot References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Dillion Klein wrote : > >So, this time I have gotten this far: > >C:\ Primary 5GB (NTFS) > :\ (no drive letter assigned) (A FAT32 Primary partition, empty) 6.2GB >D:\ Extended 5GB w/ 5GB Logical (NTFS) > >Now, how can I be sure when I go through the FreeBSD installation that I >use and FreeBSD format the ":\" primary partition created in advance? > All existing partitions on your drive should appear in fdisk when you are installing FreeBSD. So long as you know which partition (slice) is which, you should be able to delete the empty FAT32 slice and create a new FreeBSD one in its place. Perhaps I'm not understanding your problem correctly? Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 9:57:24 2002 Delivered-To: freebsd-questions@freebsd.org Received: from pc-62-31-80-192-ll.blueyonder.co.uk (pc-62-31-80-192-ll.blueyonder.co.uk [62.31.80.192]) by hub.freebsd.org (Postfix) with SMTP id DB98537B41C for ; Sun, 24 Mar 2002 09:57:19 -0800 (PST) Received: (qmail 539 invoked from network); 24 Mar 2002 17:57:18 -0000 Received: from spatula.home (HELO cream.org) (192.168.0.4) by myriad.home with SMTP; 24 Mar 2002 17:57:18 -0000 Message-ID: <3C9E13BF.1080503@cream.org> Date: Sun, 24 Mar 2002 17:58:23 +0000 From: Andrew Boothman User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.9) Gecko/20020311 X-Accept-Language: en-gb, en-us MIME-Version: 1.0 To: Gerard Cc: freebsd-questions@freebsd.org Subject: Re: qmail maybe ?? & My mailserver and freebsd... References: <20020324174644.66882.qmail@web13104.mail.yahoo.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Gerard wrote: >Well I did figure out tcpsever to get it working. >Ill try the inetd way you suggest. >Concerning me not being able to send mail to freebsd.org. I found a PR >discussning it earlier, and yes reverse lookup doesn't match forward >lookups, and unfortunately the only cable provider here (comcast) wont >cooperate, so Im probably stuck. > All you need is a reverse DNS that works, I don't think it has to match the forward lookup as you put it. Another problem which I have been bitten by just this afternoon, is that the hostname sent by your server in its HELO SMTP command has to be able to be reverse-resolved as well. This is controled in qmail by the control/helohost file. Also, you can't use message-ID's ending @localhost Sheesh! FreeBSD.org has one hell of a picky e-mail server! :-) Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 10: 9:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from loki.giallarhorn.org (asgard.dslwan.toad.net [162.33.157.41]) by hub.freebsd.org (Postfix) with ESMTP id A8F0437B400 for ; Sun, 24 Mar 2002 10:09:51 -0800 (PST) Received: from MJOLNIR (mjolnir.giallarhorn.org [172.16.1.6]) by loki.giallarhorn.org (8.11.6/8.11.6) with ESMTP id g2OI9Ok67291; Sun, 24 Mar 2002 13:09:24 -0500 (EST) (envelope-from technews@giallarhorn.org) Date: Sun, 24 Mar 2002 13:08:00 -0500 From: Orville To: "Dillion Klein" Subject: Re: NTFS w/ FreeBSD dual boot Cc: In-Reply-To: References: Message-Id: <20020324124525.AD87.TECHNEWS@giallarhorn.org> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Becky! ver. 2.00.08 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, 23 Mar 2002 22:48:56 -0500 "Dillion Klein" wrote: > Hello all, > > > I am wondering what the best procedure is to dual boot FreeBSD 4.4R > and Windows 2000. > > If I were to do the following: > > -Starting with an empty 40GB drive, install Win2K first (must be NTFS) > on a primary partition (4GB C:). > > -Create an extended partition of 5GB for my NTFS data, which would > have one logical drive D: of the 5GB's > > -Install FreeBSD and setup 6GB's for it. How can I be sure that I > do not overwrite any data on the NTFS partitions? > > Any other tips? > > Thanks for the help! > i have the same setup as you are proposing however have a fat32 partition for data. For some reason (not sure where i read/heard it) i think the ntfs driver is not recommended for r/w. Anyway to make sure you don't overwrite the ntfs partitions on the install should not be a problem since the fbsd fdisk will identify/display all the partitions on the drive. When you install fbsd just allocate the 6 gigs from the unused space. during the fbsd install, sysinstall will prompt you as to whether you want to overwrite the mbr, i would choose yes and have bsd bootlloader take over. You will need to mount the ntfs partitions yourself or add them to /etc/fstab manually since sysinstall won't. So it would be beneficial to write down the mount points for the ntfs partitions when you encounter them in the "Disk Partitions" phase of sysinstall. btw: what are you planning to do with the other 25gigs. I am not sure how nt will identify the bsd partitions from Disk Administrator so be carefull to not delete in when doing disk admin stuff from the nt side To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 10:17:58 2002 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdom00.kundenserver.de (moutvdom00.kundenserver.de [195.20.224.149]) by hub.freebsd.org (Postfix) with ESMTP id 0C24037B404 for ; Sun, 24 Mar 2002 10:17:46 -0800 (PST) Received: from [195.20.224.204] (helo=mrvdom00.kundenserver.de) by moutvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16pCYq-0002hW-00 for freebsd-questions@freebsd.org; Sun, 24 Mar 2002 19:17:44 +0100 Received: from [217.1.114.69] (helo=pD9017245.dip.t-dialin.net) by mrvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16pCYp-0005Kg-00 for freebsd-questions@FreeBSD.ORG; Sun, 24 Mar 2002 19:17:43 +0100 Date: Sun, 24 Mar 2002 19:18:30 +0000 (GMT) From: Peter Ulrich Kruppa To: Subject: apache/tomcat/mod_jserve ???? Message-ID: <20020324183229.N10895-100000@small.pukruppa.de> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! I would like to run JAVA-servlets on my (small home) http server. I am running -STABLE and have got a working apache/2.0.28 . I installed jakarta-tomcat from ports, which i can startup and shutdown. I put an include line to my http.conf wich points to tomcat.conf and when want to restart httpd, it fails with ------------------------------ Syntax error on line 13 of /usr/local/jakarta-tomcat3.2.4/conf/tomcat.conf: Cannot load /usr/local/libexec/mod_jserv.so into server: Cannot open "/usr/local/libexec/mod_jserv.so" ------------------------------ So I tried to build the apache_jserv port which failed with ------------------------------- . . . ===> Configuring for apache-jserv-1.1.2_1 loading cache ./config.cache Configuring ApacheJServ/1.1.2 checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking whether /usr/local/bin/gmake sets ${MAKE}... (cached) yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... found checking host system type... i386-portbld-freebsd4.5 checking build system type... i386-portbld-freebsd4.5 checking for ranlib... (cached) ranlib checking for gcc... (cached) cc checking whether the C compiler (cc -O -pipe ) works... yes checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no checking whether we are using GNU C... (cached) yes checking whether cc accepts -g... (cached) yes checking for ld used by GCC... (cached) /usr/libexec/elf/ld checking if the linker (/usr/libexec/elf/ld) is GNU ld... (cached) yes checking for BSD-compatible nm... (cached) /usr/bin/nm -B checking whether ln -s works... (cached) yes updating cache ./config.cache loading cache ./config.cache within ltconfig checking for object suffix... o checking for executable suffix... (cached) no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.lo... yes checking if cc supports -fno-rtti -fno-exceptions ... yes checking if cc static flag -static works... -static checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes checking whether the linker (/usr/libexec/elf/ld) supports shared libraries... yes checking command to parse /usr/bin/nm -B output... ok checking how to hardcode library paths into programs... immediate checking for /usr/libexec/elf/ld option to reload object files... -r checking dynamic linker characteristics... freebsd4.5 ld.so checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for objdir... .libs creating libtool updating cache ./config.cache loading cache ./config.cache checking whether /usr/local/bin/gmake sets ${MAKE}... (cached) yes checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel checking whether ln -s works... (cached) yes checking for gcc... (cached) cc checking whether the C compiler (cc -O -pipe ) works... yes checking whether the C compiler (cc -O -pipe ) is a cross-compiler... no checking whether we are using GNU C... (cached) yes checking whether cc accepts -g... (cached) yes checking for echo... /bin/echo checking for find... /usr/bin/find checking for sed... /usr/bin/sed checking for test... /bin/test checking for rm... /bin/rm checking for head... /usr/bin/head checking for tr... /usr/bin/tr checking for grep... /usr/bin/grep checking for cut... /usr/bin/cut checking for touch... /usr/bin/touch checking for cat... /bin/cat checking for cp... /bin/cp checking for make... /usr/local/bin/gmake checking for chmod... /bin/chmod checking for GNU make... GNU Make version 3.79.1, by Richard Stallman and Roland McGrath. /usr/local/bin/gmake checking for working const... yes checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for mode_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for ANSI C header files... (cached) yes checking for gettimeofday... yes WARNING: --with-apache-src is undefined: assuming shared object build checking for apxs... need to check for Perl first, apxs depends on it... checking for perl... /usr/bin/perl /usr/local/sbin/apxs, assume Apache 1.3 with DSO support checking for Apache installation directory (assume shared build)... /usr/local checking for Apache include directory... /usr/local/include/apache checking for Apache configuration directory... /usr/local/etc/apache/jserv checking for Apache library directory... /usr/local/libexec/apache checking for Apache layout consistency... verified checking for JDK location (please wait)... /usr/local/jdk1.1.8 checking Java platform... forced Java 1 checking for false... /usr/bin/false checking java... /usr/local/jdk1.1.8/bin/java checking javac... /usr/local/jdk1.1.8/bin/javac checking javadoc... /usr/local/jdk1.1.8/bin/javadoc checking jar... /usr/local/jdk1.1.8/bin/jar checking JSDK... /usr/local/share/java/classes/jsdk.jar checking overview... disabled ...Enabling EAPI Support... checking for httpd.h... yes checking for http_config.h... yes checking for http_core.h... yes checking for http_log.h... yes checking for http_main.h... yes checking for http_protocol.h... yes checking for util_script.h... yes checking for util_md5.h... yes checking for os-inline.c... no ===> Script "configure" failed: here are the contents of "config.log" This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. configure:784: checking for a BSD compatible install configure:837: checking whether build environment is sane configure:894: checking whether /usr/local/bin/gmake sets ${MAKE} configure:940: checking for working aclocal configure:953: checking for working autoconf configure:966: checking for working automake configure:979: checking for working autoheader configure:992: checking for working makeinfo configure:1083: checking host system type configure:1104: checking build system type configure:1124: checking for ranlib configure:1154: checking for gcc configure:1267: checking whether the C compiler (cc -O -pipe ) works configure:1283: cc -o conftest -O -pipe conftest.c 1>&5 configure:1309: checking whether the C compiler (cc -O -pipe ) is a cross-compiler configure:1314: checking whether we are using GNU C configure:1342: checking whether cc accepts -g configure:1385: checking for ld used by GCC configure:1448: checking if the linker (/usr/libexec/elf/ld) is GNU ld configure:1464: checking for BSD-compatible nm configure:1501: checking whether ln -s works ltconfig:603: checking for object suffix ltconfig:604: cc -c -O -pipe conftest.c 1>&5 ltconfig:776: checking if cc PIC flag -fPIC works ltconfig:777: cc -c -O -pipe -fPIC -DPIC conftest.c 1>&5 ltconfig:829: checking if cc supports -c -o file.o ltconfig:830: cc -c -O -pipe -o out/conftest2.o conftest.c 1>&5 ltconfig:862: checking if cc supports -c -o file.lo ltconfig:863: cc -c -O -pipe -c -o conftest.lo conftest.c 1>&5 ltconfig:914: checking if cc supports -fno-rtti -fno-exceptions ltconfig:915: cc -c -O -pipe -fno-rtti -fno-exceptions -c conftest.c conftest.c 1>&5 ltconfig:958: checking if cc static flag -static works ltconfig:959: cc -o conftest -O -pipe -static conftest.c 1>&5 GNU ld version 2.11.2 20010719 [FreeBSD] (with BFD 2.11.2 20010719 [FreeBSD]) ltconfig:1635: checking if global_symbol_pipe works ltconfig:1636: cc -c -O -pipe conftest.c 1>&5 ltconfig:1639: eval "/usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ ]\([ABCDGISTW]\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm" ltconfig:1691: cc -o conftest -O -pipe -fno-builtin -fno-rtti -fno-exceptions conftest.c conftstm.o 1>&5 configure:1685: checking whether /usr/local/bin/gmake sets ${MAKE} configure:1724: checking for a BSD compatible install configure:1777: checking whether ln -s works configure:1800: checking for gcc configure:1913: checking whether the C compiler (cc -O -pipe ) works configure:1929: cc -o conftest -O -pipe conftest.c 1>&5 configure:1955: checking whether the C compiler (cc -O -pipe ) is a cross-compiler configure:1960: checking whether we are using GNU C configure:1988: checking whether cc accepts -g configure:2026: checking for echo configure:2061: checking for find configure:2096: checking for sed configure:2131: checking for test configure:2166: checking for rm configure:2201: checking for head configure:2236: checking for tr configure:2271: checking for grep configure:2306: checking for cut configure:2341: checking for touch configure:2376: checking for cat configure:2411: checking for cp configure:2446: checking for make configure:2481: checking for chmod configure:2517: checking for GNU make configure:2547: checking for working const configure:2601: cc -c -O -pipe conftest.c 1>&5 configure:2622: checking how to run the C preprocessor configure:2643: cc -E conftest.c >/dev/null 2>conftest.out configure:2702: checking for ANSI C header files configure:2715: cc -E conftest.c >/dev/null 2>conftest.out configure:2782: cc -o conftest -O -pipe conftest.c 1>&5 configure:2806: checking for mode_t configure:2839: checking whether time.h and sys/time.h may both be included configure:2853: cc -c -O -pipe conftest.c 1>&5 configure:2874: checking whether struct tm is in sys/time.h or time.h configure:2887: cc -c -O -pipe conftest.c 1>&5 configure:2910: checking for ANSI C header files configure:3016: checking for gettimeofday configure:3044: cc -o conftest -O -pipe conftest.c 1>&5 configure:3251: checking for apxs configure:3285: checking for perl configure:3346: checking for Apache installation directory (assume shared build) configure:3351: checking for Apache include directory configure:3356: checking for Apache configuration directory configure:3361: checking for Apache library directory configure:3374: checking for Apache layout consistency configure:3485: checking for JDK location (please wait) configure:3593: checking Java platform configure:3621: checking for false configure:3659: checking java configure:3729: checking javac configure:3799: checking javadoc configure:3869: checking jar configure:3938: checking JSDK configure:4087: checking overview configure:4269: checking for httpd.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for http_config.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for http_core.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for http_log.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for http_main.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for http_protocol.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for util_script.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for util_md5.h configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4269: checking for os-inline.c configure:4279: cc -E -I/usr/local/include/apache conftest.c >/dev/null 2>conftest.out configure:4275: os-inline.c: No such file or directory configure: failed program was: #line 4274 "configure" #include "confdefs.h" #include (end of "config.log") *** Error code 1 Stop in /usr/ports/www/apache-jserv. *** Error code 1 ------------------------------ What can I do now? Regards, Uli. *-----------------------------------* * Peter Ulrich Kruppa * * - Wuppertal - * * Germany * *-----------------------------------* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 10:26:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdomng1.kundenserver.de (moutvdomng1.kundenserver.de [212.227.126.181]) by hub.freebsd.org (Postfix) with ESMTP id EB1A337B404 for ; Sun, 24 Mar 2002 10:26:28 -0800 (PST) Received: from [195.20.224.219] (helo=mrvdom03.kundenserver.de) by moutvdomng1.kundenserver.de with esmtp (Exim 3.22 #2) id 16pChH-0004rJ-00; Sun, 24 Mar 2002 19:26:27 +0100 Received: from [217.1.114.69] (helo=pD9017245.dip.t-dialin.net) by mrvdom03.kundenserver.de with esmtp (Exim 2.12 #2) id 16pChH-0003eS-00; Sun, 24 Mar 2002 19:26:27 +0100 Date: Sun, 24 Mar 2002 19:27:15 +0000 (GMT) From: Peter Ulrich Kruppa To: Thomas Widlumdh Cc: Subject: Re: Star/Open office In-Reply-To: <02032408161600.05110@ppp-212-109-5-70> Message-ID: <20020324192026.I10895-100000@small.pukruppa.de> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Thomas Widlumdh wrote: > I'm running fBSD 4.1. You will probably have to upgrade to 4.5-RELEASE first. > In the ports on my machine there is a staroffice 5.1 in the editors dir. > But the program will be fetched from the internet, of course. > And there is no Staroffice on the dist. CD. Due to license reasons StarOffice has to be fetched from sun's server. > I'd like to install Staroffice 5.2 (or perhaps open office). The OpenOffice port is still under development and will not work yet. > But how? After upgrading you can put your downloaded StarOffice file into /usr/ports/distfiles Then you # cd to /usr/ports/editors/staroffice52 type # make install and everything will work out fine :-) Regards, Uli. *-----------------------------------* * Peter Ulrich Kruppa * * - Wuppertal - * * Germany * *-----------------------------------* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 10:26:40 2002 Delivered-To: freebsd-questions@freebsd.org Received: from kitkat.hotpop.com (kitkat.hotpop.com [204.57.55.30]) by hub.freebsd.org (Postfix) with ESMTP id 5D29D37B41A for ; Sun, 24 Mar 2002 10:26:32 -0800 (PST) Received: from hotpop.com (unknown [204.57.55.31]) by kitkat.hotpop.com (Postfix) with SMTP id 9D6733126B for ; Sun, 24 Mar 2002 18:26:16 +0000 (UTC) Received: from afi (54.eagle.speede.com [64.39.177.54]) by zagnut.hotpop.com (Postfix) with SMTP id 693AC5002F for ; Sun, 24 Mar 2002 18:25:39 +0000 (UTC) From: "Dillion Klein" To: Subject: RE: NTFS w/ FreeBSD dual boot Date: Sun, 24 Mar 2002 13:25:25 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <3C9E12EC.8010104@cream.org> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG OK I have 4.4R install going now. In FDISK Partition Editor, I have the following: (Please bear with me, I am only used to setting up FreeBSD on an empty drive) Offset Size End Name PType Desc SubType 0 63 62 - 6 unused 0 63 6345612 6345674 ad0s1 1 NTFS/HPFS/ 7 6345675 10442250 16787924 ad0s2 2 fat 12 16787925 12691350 29479274 ad0s3 4 extended 15 29479275 48696085 78165359 - 6 unused 0 For those that missed it, here is what I setup in Win2K (as you should be able tell with your experience with the info above): "So, this time I have gotten this far: C:\ Primary 5GB (NTFS) :\ (no drive letter assigned) (A FAT32 Primary partition, empty) 6.2GB D:\ Extended 5GB w/ 5GB Logical (NTFS) Now, how can I be sure when I go through the FreeBSD installation that I use and FreeBSD format the ":\" primary partition created in advance? I am using Seagate ST340016A Barracuda ATA IV 40GB hard drive." If I am on the right track, my best guess is that I would simply select the ad0s2 fat slice? And this would correspond to the primary partition I created in Disk Manager (Win2K)? Thanks for the help guys! -----Original Message----- From: Andrew Boothman [mailto:andrew@cream.org] Sent: March 24, 2002 12:55 PM To: Dillion Klein Cc: freebsd-questions@freebsd.org Subject: Re: NTFS w/ FreeBSD dual boot Dillion Klein wrote : > >So, this time I have gotten this far: > >C:\ Primary 5GB (NTFS) > :\ (no drive letter assigned) (A FAT32 Primary partition, empty) 6.2GB >D:\ Extended 5GB w/ 5GB Logical (NTFS) > >Now, how can I be sure when I go through the FreeBSD installation that I >use and FreeBSD format the ":\" primary partition created in advance? > All existing partitions on your drive should appear in fdisk when you are installing FreeBSD. So long as you know which partition (slice) is which, you should be able to delete the empty FAT32 slice and create a new FreeBSD one in its place. Perhaps I'm not understanding your problem correctly? Andrew. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 10:29:30 2002 Delivered-To: freebsd-questions@freebsd.org Received: from rwcrmhc51.attbi.com (rwcrmhc51.attbi.com [204.127.198.38]) by hub.freebsd.org (Postfix) with ESMTP id DDA8837B419 for ; Sun, 24 Mar 2002 10:29:26 -0800 (PST) Received: from attbi.com ([12.252.56.235]) by rwcrmhc51.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020324182926.KRJU2626.rwcrmhc51.attbi.com@attbi.com> for ; Sun, 24 Mar 2002 18:29:26 +0000 Message-ID: <3C9E1AE8.1000203@attbi.com> Date: Sun, 24 Mar 2002 11:28:56 -0700 From: Aaron Siegel User-Agent: Mozilla/5.0 (X11; U; Linux i386; en-US; rv:0.9.4) Gecko/20011126 Netscape6/6.2.1 X-Accept-Language: en-us MIME-Version: 1.0 To: freebsd-questions Subject: Re: Promt References: <02032415452000.00260@ppp-212-.ettnet.se> <3C9E02BC.5040403@cream.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello Add the line hostname="" in the rc.conf file. You can use the hostname as root to change it at the prompt. Andrew Boothman wrote: > Thomas Widlumdh wrote: > >> Hi, >> I use to login as root on "Alt+F1" and as user on "Alt+F2". >> I connect the internet from the user. >> Whole of a sudden, sometimes, the root prompt is changed >> from an ordinary # to "ppp-212-#" >> Why is that? >> >>> From where does the prompt get it's name? >> >> > Its sounds like your ISP might be resetting your hostname when you > connect to the net. > > I'm not sure, but try a 'host ' and see if it returns > ppp-212-..... > > If that's the case, you can tell dhclient to override the hostname > setting, see man dhclient or ask again on the list. > > Andrew. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 10:40:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web13107.mail.yahoo.com (web13107.mail.yahoo.com [216.136.174.152]) by hub.freebsd.org (Postfix) with SMTP id 277E237B417 for ; Sun, 24 Mar 2002 10:40:55 -0800 (PST) Message-ID: <20020324184054.57921.qmail@web13107.mail.yahoo.com> Received: from [68.39.132.244] by web13107.mail.yahoo.com via HTTP; Sun, 24 Mar 2002 10:40:54 PST Date: Sun, 24 Mar 2002 10:40:54 -0800 (PST) From: Gerard Subject: Re: qmail maybe ?? & My mailserver and freebsd... To: Andrew Boothman Cc: freebsd-questions@freebsd.org In-Reply-To: <3C9E13BF.1080503@cream.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG My situation is this. From outside my lan (aka internet) nslookup trini0.org should point to my ip (setup via dyndns.org) nslookup (my ip) points to my assigned ISPs name According to PR 26744, I fell into the 'bad guy' category with how Im setup. dyndns.org cannot do anything about my reverse lookup, and I know comcast, would send me to hell if I ask for cooperation. So...that leaves me with blah. Thanks for the chat/debate. --- Andrew Boothman wrote: > All you need is a reverse DNS that works, I don't think it has to > match > the forward lookup as you put it. > > Another problem which I have been bitten by just this afternoon, is > that > the hostname sent by your server in its HELO SMTP command has to be > able > to be reverse-resolved as well. This is controled in qmail by the > control/helohost file. > > Also, you can't use message-ID's ending @localhost > > Sheesh! FreeBSD.org has one hell of a picky e-mail server! :-) > > Andrew. > __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards® http://movies.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 10:46:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tomts17-srv.bellnexxia.net (tomts17.bellnexxia.net [209.226.175.71]) by hub.freebsd.org (Postfix) with ESMTP id D85AF37B41A for ; Sun, 24 Mar 2002 10:46:22 -0800 (PST) Received: from there ([64.231.182.96]) by tomts17-srv.bellnexxia.net (InterMail vM.4.01.03.23 201-229-121-123-20010418) with SMTP id <20020324184621.PWAH2746.tomts17-srv.bellnexxia.net@there> for ; Sun, 24 Mar 2002 13:46:21 -0500 Content-Type: text/plain; charset="iso-8859-1" From: Steve Brown To: freebsd-questions@freebsd.org Subject: Flash in Konqueror Date: Sun, 24 Mar 2002 13:46:12 -0500 X-Mailer: KMail [version 1.3.2] MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020324184621.PWAH2746.tomts17-srv.bellnexxia.net@there> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello there, I have KDE 2.2.2 with Konqueror, Netscape 4.79 as backup, and linux-flashplugin-5.0r47 which works with Netscape. How do I enable flash with Konqueror? Thanks, Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 11:18:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from apollo.pwhsnet.com (adsl-64-172-148-130.dsl.scrm01.pacbell.net [64.172.148.130]) by hub.freebsd.org (Postfix) with ESMTP id 61C4E37B41C for ; Sun, 24 Mar 2002 11:16:38 -0800 (PST) Received: from zeus (patrick@zeus.pwhsnet.com [192.168.0.3]) by apollo.pwhsnet.com (8.12.2/8.11.6) with SMTP id g2OJK6rO008595; Sun, 24 Mar 2002 11:20:06 -0800 (PST) (envelope-from patrick@pwhsnet.com) Message-ID: <01c101c1d367$e3402a90$0300a8c0@pwhsnet.com> From: "Patrick O. Fish" To: "Peter Leftwich" Cc: "FreeBSD Questions" References: <20020324040943.C31010-100000@earl-grey.cloud9.net> Subject: Re: heat monitoring Date: Sun, 24 Mar 2002 11:12:48 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4807.1700 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Well, output from dmesg -a only shows local errors now, its been up for 32 days. This computer was custom built. - - Patrick Fish - patrick at pwhsnet dot com PWHS Networks - http://www.pwhsnet.com - ----- Original Message ----- From: "Peter Leftwich" To: "Patrick O. Fish" Cc: "FreeBSD Questions" Sent: Sunday, March 24, 2002 1:11 AM Subject: Re: heat monitoring > On Sun, 24 Mar 2002, Patrick O. Fish wrote: > > Whats a program that can display the heat of my system WITHOUT me > > having to recompile the kernel..... - - > > Patrick Fish - patrick at pwhsnet dot com > > PWHS Networks - http://www.pwhsnet.com > > http://www2.ua.freebsd.org/ports/sysutils.html - scroll down to > "heat-1.0" > > You may want to followup with another post here and include some of > the output from the command "dmesg -a" or contact your CPU's > manufucturer. > > -- > Peter Leftwich > President & Founder > Video2Video Services > Box 13692, La Jolla, CA, 92039 USA > +1-413-403-9555 > -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use iQA/AwUBPJ4lLfX9MYyVFIV4EQKskQCdEdNrYtVbmWbpdKqFZrCj9g9lRDEAoIiI 59jXTv537XBmVR/vsE6U31Uw =pxBP -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 11:33:50 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail1.stofanet.dk (mail1.stofanet.dk [212.10.10.6]) by hub.freebsd.org (Postfix) with SMTP id 41D3537B400 for ; Sun, 24 Mar 2002 11:33:46 -0800 (PST) Received: (qmail 7559 invoked from network); 24 Mar 2002 19:33:44 -0000 Received: from unknown (HELO eiffel.dk) (62.107.86.8) by mail1.stofanet.dk with SMTP; 24 Mar 2002 19:33:44 -0000 Message-ID: <3C9E280E.AE11402@eiffel.dk> Date: Sun, 24 Mar 2002 20:25:02 +0100 From: Flemming Froekjaer X-Mailer: Mozilla 4.79 [en] (X11; U; Linux 2.4.2 i386) X-Accept-Language: en MIME-Version: 1.0 To: Peter Ulrich Kruppa Cc: freebsd-questions@FreeBSD.ORG Subject: Re: apache/tomcat/mod_jserve ???? References: <20020324183229.N10895-100000@small.pukruppa.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Peter Ulrich Kruppa wrote: > Hi! > > I would like to run JAVA-servlets on my (small home) http server. > I am running -STABLE and have got a working apache/2.0.28 . > I installed jakarta-tomcat from ports, which i can startup and > shutdown. > I put an include line to my http.conf wich points to tomcat.conf > and when want to restart httpd, it fails with > ------------------------------ > Syntax error on line 13 of > /usr/local/jakarta-tomcat3.2.4/conf/tomcat.conf: > Cannot load /usr/local/libexec/mod_jserv.so into server: Cannot > open "/usr/local/libexec/mod_jserv.so" > ------------------------------ You should use mod_jk instead. Just install mod_jk, and add this to you httpd.conf file: LoadModule jk_module libexec/apache/mod_jk.so AddModule mod_jk.c JkWorkersFile /usr/local/jakarta-tomcat3.2.4/conf/workers.properties JkLogFile logs/jk.log JkLogLevel warn JkMount /*.jsp ajp12 JkMount /servlet/* ajp12 JkMount /examples/* ajp12 mod_jserv is for jserv, not jakarta-tomcat \Flemming To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 11:40:45 2002 Delivered-To: freebsd-questions@freebsd.org Received: from web21301.mail.yahoo.com (web21301.mail.yahoo.com [216.136.173.212]) by hub.freebsd.org (Postfix) with SMTP id 568DC37B41B for ; Sun, 24 Mar 2002 11:40:43 -0800 (PST) Message-ID: <20020324194043.54286.qmail@web21301.mail.yahoo.com> Received: from [66.127.231.226] by web21301.mail.yahoo.com via HTTP; Sun, 24 Mar 2002 11:40:43 PST Date: Sun, 24 Mar 2002 11:40:43 -0800 (PST) From: Kevin Cortez Subject: Sendmail Problem To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I am having a problem running Sendmail on FreeBSD 4.5-Release. In /etc/rc.conf I type sendmail_enable="YES" and reboot my computer. I can then recieve email, and sendmail, But it starts a submission port (517). Is there a way to run sendmail without starting port 517? -Kevin kevidag@yahoo.com, webjunker.com __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards® http://movies.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 11:43:12 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tninet.se (lennier.tninet.se [195.100.94.105]) by hub.freebsd.org (Postfix) with ESMTP id 48B6437B417 for ; Sun, 24 Mar 2002 11:43:08 -0800 (PST) Received: from cs.umu.se (h27n1c1o1023.bredband.skanova.com [213.64.164.27]) by lennier.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 822576.998986.1016.0s14046508lennier for ; Sun, 24 Mar 2002 20:43:06 +0100 Message-ID: <3C9E2C4B.E988034@cs.umu.se> Date: Sun, 24 Mar 2002 20:43:07 +0100 From: Paul Everlund X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U) X-Accept-Language: sv,en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: hosts.allow in dmesg Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! Found this message when doing a dmesg -a: -> Mar 19 05:26:37 fw inetd[20463]: warning: /etc/hosts.allow, line 23: -> host name/name mismatch: www2.tidenet.com != everlund.homeip.net Line 23 in hosts.allow says: ALL : ALL : allow What does this mean and what triggers the message? Thanks in advance! Best regards, Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 11:46:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f140.law11.hotmail.com [64.4.17.140]) by hub.freebsd.org (Postfix) with ESMTP id 7FF9537B404 for ; Sun, 24 Mar 2002 11:46:27 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 24 Mar 2002 11:46:27 -0800 Received: from 68.6.86.185 by lw11fd.law11.hotmail.msn.com with HTTP; Sun, 24 Mar 2002 19:46:27 GMT X-Originating-IP: [68.6.86.185] From: "Charles Burns" To: ilia@chel.skbkontur.ru, questions@FreeBSD.ORG Subject: Re: Perl thing Date: Sun, 24 Mar 2002 12:46:27 -0700 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 24 Mar 2002 19:46:27.0315 (UTC) FILETIME=[96363C30:01C1D36C] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG IANAPP (Perl Programmer) but I know that Perl is great for text parsing. One way that you could do this, though it wouldn't exactly be elegant, would be to parse the output of (say) dmesg. Surely though, there are better ways. >Dear Sirs, > >is there anything that I could use it in perl program like I can write in >C: > >#ifdef __FreeBSD__ > >#endif > >??? > >I want to port some perl program that it could run either on FreeBSD or >any other system... _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 11:51:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from Mail6.nc.rr.com (fe6.southeast.rr.com [24.93.67.53]) by hub.freebsd.org (Postfix) with ESMTP id F07DC37B417 for ; Sun, 24 Mar 2002 11:51:24 -0800 (PST) Received: from i8k.babbleon.org ([66.57.85.154]) by Mail6.nc.rr.com with Microsoft SMTPSVC(5.5.1877.687.68); Sun, 24 Mar 2002 14:51:10 -0500 Received: by i8k.babbleon.org (Postfix, from userid 111) id EF418BA05; Sun, 24 Mar 2002 14:50:45 -0500 (EST) Content-Type: text/plain; charset="iso-8859-1" From: Brian T.Schellenberger To: "Charles Burns" , ilia@chel.skbkontur.ru, questions@FreeBSD.ORG Subject: Re: Perl thing Date: Sun, 24 Mar 2002 14:50:45 -0500 X-Mailer: KMail [version 1.3] References: In-Reply-To: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Message-Id: <20020324195045.EF418BA05@i8k.babbleon.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sunday 24 March 2002 02:46 pm, Charles Burns wrote: | IANAPP (Perl Programmer) but I know that Perl is great for text parsing. | One way that you could do this, though it wouldn't exactly be elegant, | would be to parse the output of (say) dmesg. Surely though, there are | better ways. | | >Dear Sirs, | > | >is there anything that I could use it in perl program like I can write in | >C: | > | >#ifdef __FreeBSD__ | > | >#endif | > | >??? | > | >I want to port some perl program that it could run either on FreeBSD or | >any other system... Howzabout if ($ENV{'OSTYPE'} eq 'FreeBSD') { } I'm not an expert on this; I just did a printenv | grep BSD and both OSTYPE and HOSTTYPE are set to FreeBSD. I'm not sure if that's always the case, but I do know that it's always the case that you can use $ENV to get to environment variables. I also checked, and these are set for root and for a from-scratch user account, so they are probably safely universal. | | _________________________________________________________________ | Chat with friends online, try MSN Messenger: http://messenger.msn.com | | | To Unsubscribe: send mail to majordomo@FreeBSD.org | with "unsubscribe freebsd-questions" in the body of the message -- Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work) Brian, the man from Babble-On . . . . bts@babbleon.org (personal) ME --> http://www.babbleon.org http://www.eff.org <-- GOOD GUYS --> http://www.programming-freedom.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 12:20: 8 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.velosystems.net (wsip68-15-85-238.oc.oc.cox.net [68.15.85.238]) by hub.freebsd.org (Postfix) with ESMTP id 0F49F37B417 for ; Sun, 24 Mar 2002 12:20:06 -0800 (PST) Received: from win2kads (win2kads [192.168.1.5]) by mail.velosystems.net (Postfix) with SMTP id BBB6112729; Sun, 24 Mar 2002 12:20:04 -0800 (PST) Message-ID: <002a01c1d371$48c52790$0501a8c0@VELOSYSTEMS.NET> From: "Steve Wingate" To: "David Banning" , References: <20020324014754.A14999@d.tracker> Subject: Re: dns bind question Date: Sun, 24 Mar 2002 12:20:00 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > I am attempting to host out of my home. I have now a static address > and I can access my site via the ip address. My problem comes in > when I want to direct my domain name to my ip address. > > My particular registrar actually wants a "name server" address > to register rather than an IP address. I understand that the name server > keeps track of my IP address. I would like to use my one box to be all > of; > > name server: ns1.skytrackercanada.com > host for : www.skytrackercanada.com > virtual host for: www.someoneelse.com > > Can I do this? > > I just don't understand why this > is a two step process; Why can't my domain name just be mapped > _directly_ to my IP address? Why does the name server have to > get in between? > Your domain WILL be mapped directly to your IP address, but YOU need to provide two DNS servers that will tell people which IP address that will be. It's your job to provide those DNS servers, not the registrars'. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 12:30:29 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hivemind.trini0.org (bgp626680bgs.brick201.nj.comcast.net [68.39.132.244]) by hub.freebsd.org (Postfix) with SMTP id BDA3337B41E for ; Sun, 24 Mar 2002 12:30:19 -0800 (PST) Received: (qmail 5361 invoked by uid 0); 24 Mar 2002 01:43:38 -0000 Received: from unknown (HELO trini0.org) (192.168.0.3) by hivemind.trini0.org with SMTP; 24 Mar 2002 01:43:38 -0000 Message-ID: <3C9D2F49.1040100@trini0.org> Date: Sat, 23 Mar 2002 20:43:37 -0500 From: Gerard Samuel User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:0.9.9) Gecko/20020315 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Jeff Jeter Cc: freebsd-questions@freebsd.org Subject: Re: Can't startx as non-root References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Install x11/wrapper Jeff Jeter wrote: > When i try to startx in an account other than root i get an error saying > dcopserver isn't running. how do i fix this. thx. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 12:30:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdom00.kundenserver.de (moutvdom00.kundenserver.de [195.20.224.149]) by hub.freebsd.org (Postfix) with ESMTP id 8445437B41D for ; Sun, 24 Mar 2002 12:30:19 -0800 (PST) Received: from [172.19.20.62] (helo=mrvdomng1.kundenserver.de) by moutvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id 16pEcx-0002NY-00; Sun, 24 Mar 2002 21:30:07 +0100 Received: from [217.1.114.69] (helo=pD9017245.dip.t-dialin.net) by mrvdomng1.kundenserver.de with esmtp (Exim 3.22 #2) id 16pEcx-0004Jh-00; Sun, 24 Mar 2002 21:30:07 +0100 Date: Sun, 24 Mar 2002 21:30:54 +0000 (GMT) From: Peter Ulrich Kruppa To: Flemming Froekjaer Cc: Subject: Re: apache/tomcat/mod_jserve ???? In-Reply-To: <3C9E280E.AE11402@eiffel.dk> Message-ID: <20020324213000.Y10895-100000@small.pukruppa.de> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Flemming: THANX!!! Uli. On Sun, 24 Mar 2002, Flemming Froekjaer wrote: > Peter Ulrich Kruppa wrote: > > > Hi! > > > > I would like to run JAVA-servlets on my (small home) http server. > > I am running -STABLE and have got a working apache/2.0.28 . > > I installed jakarta-tomcat from ports, which i can startup and > > shutdown. > > I put an include line to my http.conf wich points to tomcat.conf > > and when want to restart httpd, it fails with > > ------------------------------ > > Syntax error on line 13 of > > /usr/local/jakarta-tomcat3.2.4/conf/tomcat.conf: > > Cannot load /usr/local/libexec/mod_jserv.so into server: Cannot > > open "/usr/local/libexec/mod_jserv.so" > > ------------------------------ > > You should use mod_jk instead. > Just install mod_jk, and add this to you httpd.conf file: > > LoadModule jk_module libexec/apache/mod_jk.so > AddModule mod_jk.c > > > JkWorkersFile /usr/local/jakarta-tomcat3.2.4/conf/workers.properties > JkLogFile logs/jk.log > JkLogLevel warn > JkMount /*.jsp ajp12 > JkMount /servlet/* ajp12 > JkMount /examples/* ajp12 > > > mod_jserv is for jserv, not jakarta-tomcat > > \Flemming > > > *-----------------------------------* * Peter Ulrich Kruppa * * - Wuppertal - * * Germany * *-----------------------------------* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 12:47:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.cz (diana.mobil.cz [194.228.200.160]) by hub.freebsd.org (Postfix) with ESMTP id 14F5A37B417 for ; Sun, 24 Mar 2002 12:47:18 -0800 (PST) Received: from ester.mobil.cz (ester.mobil.cz [194.213.62.23]) by mobil.cz (8.11.6/8.11.0) with ESMTP id g2OKlEH10753; Sun, 24 Mar 2002 21:47:15 +0100 Received: from roman.mobil.cz ([10.2.0.89]) by ester.mobil.cz (Lotus Domino Release 5.0.9a) with ESMTP id 2002032421470486:3625 ; Sun, 24 Mar 2002 21:47:04 +0100 Received: (from roman@localhost) by roman.mobil.cz (8.11.6/8.11.6) id g2OL19G03188; Sun, 24 Mar 2002 22:01:09 +0100 (CET) (envelope-from neuhauser@mobil.cz) X-Authentication-Warning: roman.mobil.cz: roman set sender to neuhauser@mobil.cz using -f Date: Sun, 24 Mar 2002 22:01:09 +0100 From: Roman Neuhauser To: "Brian T. Schellenberger" Cc: Charles Burns , ilia@chel.skbkontur.ru, questions@FreeBSD.ORG Subject: Re: Perl thing Message-ID: <20020324210109.GJ389@roman.mobil.cz> Mail-Followup-To: "Brian T. Schellenberger" , Charles Burns , ilia@chel.skbkontur.ru, questions@FreeBSD.ORG References: <20020324195045.EF418BA05@i8k.babbleon.org> Mime-Version: 1.0 In-Reply-To: <20020324195045.EF418BA05@i8k.babbleon.org> User-Agent: Mutt/1.3.26i X-MIMETrack: Itemize by SMTP Server on ester/Mobil(Release 5.0.9a |January 7, 2002) at 03/24/2002 09:47:04 PM, Serialize by Router on ester/Mobil(Release 5.0.9a |January 7, 2002) at 03/24/2002 09:47:13 PM, Serialize complete at 03/24/2002 09:47:13 PM Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG > From: Brian T.Schellenberger > To: "Charles Burns" , > ilia@chel.skbkontur.ru, questions@FreeBSD.ORG > Subject: Re: Perl thing > Date: Sun, 24 Mar 2002 14:50:45 -0500 > > On Sunday 24 March 2002 02:46 pm, Charles Burns wrote: > | IANAPP (Perl Programmer) but I know that Perl is great for text parsing. > | One way that you could do this, though it wouldn't exactly be elegant, > | would be to parse the output of (say) dmesg. Surely though, there are > | better ways. > | > | >Dear Sirs, > | > > | >is there anything that I could use it in perl program like I can write in > | >C: > | > > | >#ifdef __FreeBSD__ > | > > | >#endif > | > > | >??? > | > > | >I want to port some perl program that it could run either on FreeBSD or > | >any other system... > > Howzabout > > if ($ENV{'OSTYPE'} eq 'FreeBSD') { > } > > I'm not an expert on this; I just did a printenv | grep BSD and both OSTYPE > and HOSTTYPE are set to FreeBSD. I'm not sure if that's always the case, but > I do know that it's always the case that you can use $ENV to get to > environment variables. > > I also checked, and these are set for root and for a from-scratch user > account, so they are probably safely universal. also: roman@roman ~ > perl -e '$x = `uname`; print $x;' FreeBSD perlport(1): Unix Perl works on a bewildering variety of Unix and Unix-like platforms (see e.g. most of the files in the hints/ directory in the source code kit). On most of these systems, the value of $^O (hence $Config{'osname'}, too) is determined by lowercasing and stripping punctuation from the first field of the string returned by typing uname -a (or a similar command) at the shell prompt. Here, for example, are a few of the more popular Unix flavors: uname $^O $Config{'archname'} ------------------------------------------- AIX aix aix FreeBSD freebsd freebsd-i386 Linux linux i386-linux HP-UX hpux PA-RISC1.1 IRIX irix irix OSF1 dec_osf alpha-dec_osf SunOS solaris sun4-solaris SunOS solaris i86pc-solaris SunOS4 sunos sun4-sunos Note that because the $Config{'archname'} may depend on the hardware architecture it may vary quite a lot, much more than the $^O. -- FreeBSD 4.4-STABLE 9:54PM up 5:40, 12 users, load averages: 0.01, 0.06, 0.04 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 13:17:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailsrv.otenet.gr (mailsrv.otenet.gr [195.170.0.5]) by hub.freebsd.org (Postfix) with ESMTP id B685937B404 for ; Sun, 24 Mar 2002 13:17:50 -0800 (PST) Received: from hades.hell.gr (patr530-a081.otenet.gr [212.205.215.81]) by mailsrv.otenet.gr (8.12.2/8.12.2) with ESMTP id g2OLHfIg010581; Sun, 24 Mar 2002 23:17:44 +0200 (EET) Received: from hades.hell.gr (hades [127.0.0.1]) by hades.hell.gr (8.12.2/8.12.2) with ESMTP id g2OLIXk3007230; Sun, 24 Mar 2002 23:18:41 +0200 (EET) (envelope-from keramida@freebsd.org) Received: (from charon@localhost) by hades.hell.gr (8.12.2/8.12.2/Submit) id g2OGMKol005935; Sun, 24 Mar 2002 18:22:20 +0200 (EET) (envelope-from keramida@freebsd.org) Date: Sun, 24 Mar 2002 18:22:20 +0200 From: Giorgos Keramidas To: Stanley Chan Cc: questions@freebsd.org Subject: Re: how to restrict the telnet Message-ID: <20020324162220.GC5623@hades.hell.gr> References: <3C9D9E14.3D384063@cyberec.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3C9D9E14.3D384063@cyberec.com> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 2002-03-24 17:36, Stanley Chan wrote: > Dear sir, > > I am using the FreeBSD 4.3 to run my webserver. Can you tell me how can > I restrict anyone telnet to my machine except me. The easiest way to get rid of Telnet is not run it at all. Not even for you. The fact that passwords are in cleartext, travelling on the ``wild'' Internet, is enough for me to stop using Telnet on any machine that is connected to the Internet. On the other hand, if you really *must* use Telnet, you might find the tcpwrappers useful. Telnet is started from inetd, and the default flags to inetd are: $ grep inetd_flags /etc/defaults/rc.conf inetd_flags="-wW" # Optional flags to inetd With -w and -W enabled, inetd will check the file /etc/hosts.allow when a connection to telnet is made. The format of the /etc/hosts.allow file is described in hosts_access(5). Check that manpage, and the existing examples in /usr/src/etc/hosts.allow and you should easily find your way :) A minimal access list for telnet, that blocks it for everyone except for clients coming from 'trustedhost' might look like: telnet : trustedhost : ALLOW telnet : ALL : DENY Cheers, Giorgos Keramidas FreeBSD Documentation Project keramida@{freebsd.org,ceid.upatras.gr} http://www.FreeBSD.org/docproj/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 13:31:39 2002 Delivered-To: freebsd-questions@freebsd.org Received: from ool-18bacefa.dyn.optonline.net (ool-18bacefa.dyn.optonline.net [24.186.206.250]) by hub.freebsd.org (Postfix) with ESMTP id 6E16337B417 for ; Sun, 24 Mar 2002 13:31:32 -0800 (PST) Received: (from cbr@localhost) by ool-18bacefa.dyn.optonline.net (8.11.6/8.11.6) id g2OLVGS48081; Sun, 24 Mar 2002 16:31:16 -0500 (EST) (envelope-from cbr) From: Christopher Rued MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15518.17828.591344.531310@ool-18bacefa.dyn.optonline.net> Date: Sun, 24 Mar 2002 16:31:16 -0500 To: freebsd-questions@FreeBSD.org Subject: gnomemimedata port build failed X-Mailer: VM 7.00 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I have been having trouble "portupgrade"-ing a few ports over the last couple of weeks, seemingly due to a problem with the gnomemimedata port. I've looked around and haven't noticed anyone else having this problem, so I thought that maybe I'd give -questions a shot. Has anyone else had problems with this port, or can you offer some advise about what may be wrong? The output of running "make" in the port's directory is at the bottom of this message. TIA Chris --------------------- output follow ----------------- # cd /usr/ports/misc/gnomemimedata # make ===> Configuring for gnomemimedata-1.0.1_1 checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... found checking whether to enable maintainer-specific portions of Makefiles... no checking for perl... /usr/bin/perl checking for gcc... cc checking for C compiler default output... configure: error: C compiler cannot create executables ===> Script "configure" failed: here are the contents of "config.log" This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by configure, which was generated by GNU Autoconf 2.52. Invocation command line was $ ./configure --x-libraries=/usr/X11R6/lib --x-includes=/usr/X11R6/include --with-gnome=/usr/X11R6 --localstatedir=/usr/X11R6/share/gnome --datadir=/usr/X11R6/share/gnome --prefix=/usr/X11R6 --target= i386-unknown-freebsd4.5 ## ---------- ## ## Platform. ## ## ---------- ## hostname = ool-18bacefa.dyn.optonline.net uname -m = i386 uname -r = 4.5-STABLE uname -s = FreeBSD uname -v = FreeBSD 4.5-STABLE #0: Sun Mar 10 01:24:04 EST 2002 root@ool-18bacefa.dyn.optonline.ne t:/usr/obj/usr/src/sys/FRANKENSTEIN /usr/bin/uname -p = i386 /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/root/b in ## ------------ ## ## Core tests. ## ## ------------ ## configure:957: PATH=".;."; conftest.sh conftest.sh: not found configure:960: $? = 127 configure:1010: checking for a BSD compatible install configure:1059: result: /usr/bin/install -c -o root -g wheel configure:1070: checking whether build environment is sane configure:1113: result: yes configure:1128: checking whether make sets ${MAKE} configure:1148: result: yes configure:1176: checking for working aclocal configure:1183: result: found configure:1191: checking for working autoconf configure:1198: result: found configure:1206: checking for working automake configure:1213: result: found configure:1221: checking for working autoheader configure:1228: result: found configure:1236: checking for working makeinfo configure:1243: result: found configure:1251: checking whether to enable maintainer-specific portions of Makefiles configure:1260: result: no configure:1290: checking for perl configure:1307: found /usr/bin/perl configure:1318: result: /usr/bin/perl configure:1384: checking for gcc configure:1407: result: cc configure:1635: checking for C compiler version configure:1638: cc --version &5 2.95.3 configure:1641: $? = 0 configure:1643: cc -v &5 Using builtin specs. gcc version 2.95.3 20010315 (release) [FreeBSD] configure:1646: $? = 0 configure:1648: cc -V &5 cc: argument to `-V' is missing configure:1651: $? = 1 configure:1671: checking for C compiler default output configure:1674: cc -O -pipe -I/usr/local/include conftest.c -L/usr/local/lib -lintl >&5 /usr/libexec/elf/ld: cannot find -lintl configure:1677: $? = 1 configure: failed program was: #line 1655 "configure" #include "confdefs.h" int main () { ; return 0; } configure:1700: error: C compiler cannot create executables ## ----------------- ## ## Cache variables. ## ## ----------------- ## ac_cv_path_INTLTOOL_PERL='/usr/bin/perl' ac_cv_env_LDFLAGS_set='' ac_cv_env_CFLAGS_set='set' ac_cv_env_CPP_value='' ac_cv_env_CPPFLAGS_set='set' ac_cv_env_host_alias_set='' ac_cv_env_build_alias_set='' ac_cv_env_LDFLAGS_value='' ac_cv_env_target_alias_set='set' ac_cv_env_CFLAGS_value='-O -pipe ' ac_cv_env_CC_set='set' ac_cv_prog_make_make_set='yes' ac_cv_env_CPPFLAGS_value='-I/usr/local/include' ac_cv_env_host_alias_value='' ac_cv_env_build_alias_value='' ac_cv_prog_ac_ct_CC='cc' ac_cv_env_target_alias_value='i386-unknown-freebsd4.5' ac_cv_env_CC_value='cc' ac_cv_env_CPP_set='' ## ------------ ## ## confdefs.h. ## ## ------------ ## #define PACKAGE "gnome-mime-data" #define VERSION "1.0.1" configure: exit 77 (end of "config.log") *** Error code 1 Stop in /usr/ports/misc/gnomemimedata. *** Error code 1 Stop in /usr/ports/misc/gnomemimedata. *** Error code 1 Stop in /usr/ports/misc/gnomemimedata. *** Error code 1 Stop in /usr/ports/misc/gnomemimedata. # To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 13:46:15 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 9379F37B400 for ; Sun, 24 Mar 2002 13:46:11 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id D7C4128E93; Sun, 24 Mar 2002 16:46:10 -0500 (EST) Date: Sun, 24 Mar 2002 16:46:10 -0500 (EST) From: Peter Leftwich X-X-Sender: To: "Gary W. Swearingen" Cc: Joe & Fhe Barbish , FreeBSD Questions Subject: Re: command history for user accounts [tcsh promotion] In-Reply-To: <7mit7m5l6w.t7m@localhost.localdomain> Message-ID: <20020324164045.H50035-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On 24 Mar 2002, Gary W. Swearingen wrote: > "Joe & Fhe Barbish" writes: > > My regular users created with adduser do not have any command history like my root has. I am using the default sh shell. I have command on the root account. > All shells have history, probably enabled by shell default. Determine which shell your users are getting by default (/etc/adduser.conf, or better, /etc/passwd) and check the man page for the history-controlling environmental variables and "set" commands. Then investigate how the users have these set and maybe how they got set (shell startup scripts). Some scripts come from "/usr/share/skel/", others are in /etc/. I use tcsh for my shell and in my ~/.cshrc (or you can use ~/.tcshrc, which is sourced at login, or may be manually sourced by typing `source ~/.cshrc if you make changes to it) I have: set history = 1000 set savehist = 1000 set histfile = ~/.history This way, I can type `history | less -e` at my prompt and see command number, HH:MM, and command. If anyone knows how I can configure this command to be more verbose and include day/date, please POST how. The tcsh shell stores this information in a file I've set as ~/.history which can be backed up to an archive or copied to a folder for later perusal. Each command, however, is preceded by an odd code that seems to be the command number and time wrapped up in long integer. -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 13:52:51 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta05-svc.ntlworld.com (mta05-svc.ntlworld.com [62.253.162.45]) by hub.freebsd.org (Postfix) with ESMTP id 44FC337B404 for ; Sun, 24 Mar 2002 13:52:48 -0800 (PST) Received: from sobek.lan ([62.252.14.111]) by mta05-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020324215246.MDKW7206.mta05-svc.ntlworld.com@sobek.lan>; Sun, 24 Mar 2002 21:52:46 +0000 Received: (from greid@localhost) by sobek.lan (8.11.6/8.11.6) id g2OLqi302434; Sun, 24 Mar 2002 21:52:44 GMT (envelope-from greid@FreeBSD.org) X-Authentication-Warning: sobek.lan: greid set sender to greid@FreeBSD.org using -f Date: Sun, 24 Mar 2002 21:52:44 +0000 From: George Reid To: David Blumberg Cc: freebsd-questions@FreeBSD.org Subject: Re: Kernel problem Message-ID: <20020324215244.A2387@FreeBSD.org> References: <3C9DB69E.5000104@linux.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5.1i In-Reply-To: <3C9DB69E.5000104@linux.se>; from davidblumberg@linux.se on Sun, Mar 24, 2002 at 12:21:02PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Mar 24, 2002 at 12:21:02PM +0100, David Blumberg wrote: > asr.o: In function `ASR_failActiveCommands': > asr.o(.text+0x6e7): undefined reference to `xpt_done' > asr.o: In function `ASR_rescan': > asr.o(.text.+0xba0): underfined refernce to `xpt_create_path' [...] > #device umass # Disks/Mass storage - Requires scbus and da [...] This is your problem. It helps to read the kernel configuration file more carefully. Where it says "Requires scbus and da", it means that you must include 'scbus' and 'da'. It's fairly simple. This is almost a FAQ by now. -- George C A Reid Tel: (08701) 200870 Ext. 26654 WWW: http://people.FreeBSD.org/~greid/ Mob: (07740) 197460 FreeBSD Committer/Developer greid@FreeBSD.org Oriel College, Oxford University george.reid@oriel.ox.ac.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 13:52:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 9CEA537B400 for ; Sun, 24 Mar 2002 13:52:56 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 4575328E12; Sun, 24 Mar 2002 16:52:56 -0500 (EST) Date: Sun, 24 Mar 2002 16:52:56 -0500 (EST) From: Peter Leftwich X-X-Sender: To: Aaron Siegel Cc: FreeBSD Questions Subject: Re: Promt In-Reply-To: <3C9E1AE8.1000203@attbi.com> Message-ID: <20020324164739.I50035-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Aaron Siegel wrote: > Hello - Add the line > hostname="" > in the rc.conf file. You can use the hostname as root to change it at the prompt. > Andrew Boothman wrote: > >> Hi, I use to login as root on "Alt+F1" and as user on "Alt+F2". I connect the internet from the user. Whole of a sudden, sometimes, the root prompt is changed from an ordinary # to "ppp-212-#" Why is that? From where does the prompt get it's name? > > Its sounds like your ISP might be resetting your hostname when you connect to the net. I'm not sure, but try a 'host ' and see if it returns ppp-212-..... > > If that's the case, you can tell dhclient to override the hostname setting, see man dhclient or ask again on the list. > > Andrew. (By the way you misspelled prompt.) :) If your post is because you just want your prompt to be "#" then read up on sh if you use that as your shell and set your prompt to BarneyPurpleDinosaur if you wish *grins* I use tcsh and it has a command "set prompt = 'whatever you including bold/unbold/command#/time etc'" (man tcsh) The difference in prompts is because sometimes you are online and other times offline, it would seem. -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 13:56:41 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id E4FDC37B404 for ; Sun, 24 Mar 2002 13:56:35 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 7BE1528EF1; Sun, 24 Mar 2002 16:56:35 -0500 (EST) Date: Sun, 24 Mar 2002 16:56:35 -0500 (EST) From: Peter Leftwich X-X-Sender: To: Andrew Boothman Cc: Cliff Sarginson , FreeBSD Questions Subject: Re: So long and thanks for all the fish [wah wah wah] In-Reply-To: <3C9DF927.4070105@cream.org> Message-ID: <20020324165403.R50035-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Andrew Boothman wrote: > Cliff Sarginson wrote: > > Ok, Since I have been cracked. I have been told it was because I run an anon ftp server, even though said server is not plugged in. And has not been plugged in for weeks. No-one believes a word I say about the secure shell. That there is a security hole in it. Since I get told off for using the word arsehole, but it seems to be ok for people to call me a Nazi. I am retiring from the scene for a while. Apparently I need to rebuild my network. I doubt I will be missed. > No-one wants to see anybody leave the FreeBSD community! Cliff, Who called you a Nazi?! And what did the crackers/haQkers do to you? > Was this sshd hole discussed on security@freebsd.org? That is were the security-meisters hang out, and I'm sure that they want/need to hear from you and about the problems that you're having. > Andrew. What -is- the sshd hole anyway?? -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14: 6:34 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 2C8D037B400 for ; Sun, 24 Mar 2002 14:06:33 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id ACACE28B22; Sun, 24 Mar 2002 17:06:32 -0500 (EST) Date: Sun, 24 Mar 2002 17:06:32 -0500 (EST) From: Peter Leftwich X-X-Sender: To: Kevin Cortez Cc: FreeBSD Questions Subject: Re: Sendmail Problem [Port 517] In-Reply-To: <20020324194043.54286.qmail@web21301.mail.yahoo.com> Message-ID: <20020324170449.T50035-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Kevin Cortez wrote: > I am having a problem running Sendmail on FreeBSD 4.5-Release. In /etc/rc.conf I type sendmail_enable="YES" and reboot my computer. I can then recieve email, and sendmail, But it starts a submission port (517). Is there a way to run sendmail without starting port 517? > -Kevin > kevidag@yahoo.com, webjunker.com I gave up on "sendmail.in" to my dynamic IP, so just use "sendmail.out" which works fine. Did you look in /etc/services file? What is port 517 anyway, List? Perhaps http://www.sendmail.org can help you Kevin. -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:11:31 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 20F4137B400 for ; Sun, 24 Mar 2002 14:11:29 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id AF91D28EE2; Sun, 24 Mar 2002 17:11:28 -0500 (EST) Date: Sun, 24 Mar 2002 17:11:28 -0500 (EST) From: Peter Leftwich X-X-Sender: To: Paul Everlund Cc: FreeBSD Questions Subject: Re: hosts.allow in dmesg [www2.tidenet.com] In-Reply-To: <3C9E2C4B.E988034@cs.umu.se> Message-ID: <20020324170737.L50035-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Paul Everlund wrote: > Hi! Found this message when doing a dmesg -a: > -> Mar 19 05:26:37 fw inetd[20463]: warning: /etc/hosts.allow, line 23: > -> host name/name mismatch: www2.tidenet.com != everlund.homeip.net > Line 23 in hosts.allow says: > ALL : ALL : allow > What does this mean and what triggers the message? Thanks in advance! Best regards, Paul My /etc/hosts.allow file (which I didn't know about until a previous discussion on this list, and which I just modified) has in it: # Start by allowing everything (this prevents the rest of the file # from working, so remove it when you need protection). # The rules here work on a "First match wins" basis. ALL : ALL : allow The "First match wins" basis is important because you can put other lines ahead of the ALL-ALL-allow line... by the way, when I query "host www2.tidenet.com" on two different nameservers I get host not found. -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:21:59 2002 Delivered-To: freebsd-questions@freebsd.org Received: from russian-caravan.cloud9.net (russian-caravan.cloud9.net [168.100.1.4]) by hub.freebsd.org (Postfix) with ESMTP id 38EE037B419 for ; Sun, 24 Mar 2002 14:21:54 -0800 (PST) Received: from earl-grey.cloud9.net (earl-grey.cloud9.net [168.100.1.1]) by russian-caravan.cloud9.net (Postfix) with ESMTP id 863FD28EBB; Sun, 24 Mar 2002 17:21:53 -0500 (EST) Date: Sun, 24 Mar 2002 17:21:53 -0500 (EST) From: Peter Leftwich X-X-Sender: To: "Patrick O. Fish" Cc: FreeBSD Questions Subject: Re: heat monitoring In-Reply-To: <01c101c1d367$e3402a90$0300a8c0@pwhsnet.com> Message-ID: <20020324171952.J50035-100000@earl-grey.cloud9.net> Organization: Video2Video Services - http://Www.Video2Video.Com MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Patrick O. Fish wrote: > Well, output from dmesg -a only shows local errors now, its been up for 32 days. This computer was custom built. > - - > Patrick Fish - patrick at pwhsnet dot com > PWHS Networks - http://www.pwhsnet.com Hmph. "dmesg -a" should show PnP (plug-n-pray) device information. When you say the computer was custom built, do you mean even the CPU *chip* is custom, or something like a rare or discontinued/obsolete product?? -- Peter Leftwich President & Founder Video2Video Services Box 13692, La Jolla, CA, 92039 USA +1-413-403-9555 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:24:56 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lists.blarg.net (lists.blarg.net [206.124.128.17]) by hub.freebsd.org (Postfix) with ESMTP id 1E88637B404 for ; Sun, 24 Mar 2002 14:24:54 -0800 (PST) Received: from thig.blarg.net (thig.blarg.net [206.124.128.18]) by lists.blarg.net (Postfix) with ESMTP id BB8B1BD09; Sun, 24 Mar 2002 14:24:53 -0800 (PST) Received: from localhost.localdomain ([206.124.139.115]) by thig.blarg.net (8.9.3/8.9.3) with ESMTP id OAA13868; Sun, 24 Mar 2002 14:24:53 -0800 Received: (from jojo@localhost) by localhost.localdomain (8.11.6/8.11.3) id g2OMNsL27696; Sun, 24 Mar 2002 14:23:54 -0800 (PST) (envelope-from swear@blarg.net) To: Scott Mitchell Cc: Per olof Ljungmark , freebsd-questions@FreeBSD.ORG Subject: Re: Switching between kernels References: <200203241500.g2OF02U62813@dns2.s.bonet.se> <20020324163052.C281@fishballoon.dyndns.org> From: swear@blarg.net (Gary W. Swearingen) Date: 24 Mar 2002 14:23:53 -0800 In-Reply-To: <20020324163052.C281@fishballoon.dyndns.org> Message-ID: Lines: 11 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Scott Mitchell writes: > Just hit a key to break out of the autoboot countdown, then: > > boot kernel.PCM > > or whatever you called the alternative kernel. Might he need to do something with modules.PCM? (The Handbook and loader(8) manual are too sketchy.) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:29:57 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tninet.se (sheridan.tninet.se [195.100.94.102]) by hub.freebsd.org (Postfix) with ESMTP id 5F03C37B400 for ; Sun, 24 Mar 2002 14:29:52 -0800 (PST) Received: from cs.umu.se (h27n1c1o1023.bredband.skanova.com [213.64.164.27]) by sheridan.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 489036.8988.1017.0s14140795sheridan ; Sun, 24 Mar 2002 23:29:48 +0100 Message-ID: <3C9E535D.F5A5B3B5@cs.umu.se> Date: Sun, 24 Mar 2002 23:29:49 +0100 From: Paul Everlund X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U) X-Accept-Language: sv,en MIME-Version: 1.0 To: Peter Leftwich Cc: FreeBSD Questions Subject: Re: hosts.allow in dmesg [www2.tidenet.com] References: <20020324170737.L50035-100000@earl-grey.cloud9.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Peter Leftwich wrote: > > On Sun, 24 Mar 2002, Paul Everlund wrote: > > Hi! Found this message when doing a dmesg -a: > > -> Mar 19 05:26:37 fw inetd[20463]: warning: /etc/hosts.allow, line 23: > > -> host name/name mismatch: www2.tidenet.com != everlund.homeip.net > > Line 23 in hosts.allow says: > > ALL : ALL : allow > > What does this mean and what triggers the message? > > Thanks in advance! > > Best regards, Paul > > My /etc/hosts.allow file (which I didn't know about until a previous > discussion on this list, and which I just modified) has in it: > > # Start by allowing everything (this prevents the rest of the file > # from working, so remove it when you need protection). > # The rules here work on a "First match wins" basis. > ALL : ALL : allow > > The "First match wins" basis is important because you can put other lines > ahead of the ALL-ALL-allow line... by the way, when I query "host > www2.tidenet.com" on two different nameservers I get host not found. Thanks for your answer! The first match in my hosts.allow is ALL-ALL-allow. And if www2.tidenet.com does not exist, why do I even get this message? Do anyone know what triggers it? Someone here previously wrote that using inetd with -w -W (TCP-wrappers) uses the hosts.allow-file. Do this mean that someone are trying to connect through an inetd active service, and when a host lookup can not be done this message is triggered? Best regards, Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:36:32 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mta02-svc.ntlworld.com (mta02-svc.ntlworld.com [62.253.162.42]) by hub.freebsd.org (Postfix) with ESMTP id 7116A37B405 for ; Sun, 24 Mar 2002 14:36:28 -0800 (PST) Received: from lungfish.ntlworld.com ([80.4.0.215]) by mta02-svc.ntlworld.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020324223627.LSNV8848.mta02-svc.ntlworld.com@lungfish.ntlworld.com>; Sun, 24 Mar 2002 22:36:27 +0000 Received: from tuatara.goatsucker.org (tuatara.goatsucker.org [192.168.1.6]) by lungfish.ntlworld.com (8.11.6/8.11.3) with ESMTP id g2OMaQj08777; Sun, 24 Mar 2002 22:36:26 GMT (envelope-from scott@tuatara.goatsucker.org) Received: (from scott@localhost) by tuatara.goatsucker.org (8.11.6/8.11.6) id g2OMaQ007960; Sun, 24 Mar 2002 22:36:26 GMT (envelope-from scott) Date: Sun, 24 Mar 2002 22:36:26 +0000 From: Scott Mitchell To: "Gary W. Swearingen" Cc: Per olof Ljungmark , freebsd-questions@FreeBSD.ORG Subject: Re: Switching between kernels Message-ID: <20020324223626.G281@fishballoon.dyndns.org> References: <200203241500.g2OF02U62813@dns2.s.bonet.se> <20020324163052.C281@fishballoon.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from swear@blarg.net on Sun, Mar 24, 2002 at 02:23:53PM -0800 X-Operating-System: FreeBSD 4.5-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, Mar 24, 2002 at 02:23:53PM -0800, Gary W. Swearingen wrote: > Scott Mitchell writes: > > > Just hit a key to break out of the autoboot countdown, then: > > > > boot kernel.PCM > > > > or whatever you called the alternative kernel. > > Might he need to do something with modules.PCM? > > (The Handbook and loader(8) manual are too sketchy.)) I might not be 100% on this, but I think modules are always installed in /modules, no matter what the kernel is called. When I'm upgrading after a cvsup, I build both GENERIC and my normal custom kernel, but only build modules with one of those to avoid having the same thing installed twice. Since both of Per's kernels are built from the same sources and identical except for the SMP/PCM options, either should work with the same set of modules. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott.mitchell@mail.com | 0xAA775B8B | -- Anon To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:37: 5 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail7.kc.rr.com (fe7.rdc-kc.rr.com [24.94.162.160]) by hub.freebsd.org (Postfix) with ESMTP id B224A37B400 for ; Sun, 24 Mar 2002 14:37:02 -0800 (PST) Received: from gruffy.kc.rr.com ([65.26.58.166]) by mail7.kc.rr.com with Microsoft SMTPSVC(5.5.1877.537.53); Sun, 24 Mar 2002 16:34:23 -0600 Received: (from riksca@localhost) by gruffy.kc.rr.com (8.11.6/8.11.6) id g2OMaah78996; Sun, 24 Mar 2002 16:36:36 -0600 (CST) (envelope-from riksca) Date: Sun, 24 Mar 2002 16:36:36 -0600 From: Rik Scarborough To: Flemming Froekjaer Cc: Peter Ulrich Kruppa , freebsd-questions@FreeBSD.ORG Subject: Re: apache/tomcat/mod_jserve ???? Message-ID: <20020324223636.GA78855@gruffy.kc.rr.com> Mail-Followup-To: Flemming Froekjaer , Peter Ulrich Kruppa , freebsd-questions@FreeBSD.ORG References: <20020324183229.N10895-100000@small.pukruppa.de> <3C9E280E.AE11402@eiffel.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3C9E280E.AE11402@eiffel.dk> User-Agent: Mutt/1.3.28i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Have you been able to get mod_jk to work with Apache2? I cannot. The port will not compile unless Apache1 is installed, and then will not run under Apache2. If I get the newest mod_jk and compile it, it still will not run under Apache2 on FreeBSD. ~Rik * Flemming Froekjaer (flemming@eiffel.dk) [020324 13:36]: > Peter Ulrich Kruppa wrote: > > > Hi! > > > > I would like to run JAVA-servlets on my (small home) http server. > > I am running -STABLE and have got a working apache/2.0.28 . > > I installed jakarta-tomcat from ports, which i can startup and > > shutdown. > > I put an include line to my http.conf wich points to tomcat.conf > > and when want to restart httpd, it fails with > > ------------------------------ > > Syntax error on line 13 of > > /usr/local/jakarta-tomcat3.2.4/conf/tomcat.conf: > > Cannot load /usr/local/libexec/mod_jserv.so into server: Cannot > > open "/usr/local/libexec/mod_jserv.so" > > ------------------------------ > > You should use mod_jk instead. > Just install mod_jk, and add this to you httpd.conf file: > > LoadModule jk_module libexec/apache/mod_jk.so > AddModule mod_jk.c > > > JkWorkersFile /usr/local/jakarta-tomcat3.2.4/conf/workers.properties > JkLogFile logs/jk.log > JkLogLevel warn > JkMount /*.jsp ajp12 > JkMount /servlet/* ajp12 > JkMount /examples/* ajp12 > > > mod_jserv is for jserv, not jakarta-tomcat > > \Flemming > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Ranger Rik -- RikSca@mac.com Brought to you by FreeBSD 4.5 Joshua 24:15 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:47: 0 2002 Delivered-To: freebsd-questions@freebsd.org Received: from spitfire.velocet.net (spitfire.velocet.net [216.138.223.227]) by hub.freebsd.org (Postfix) with ESMTP id 6447A37B405 for ; Sun, 24 Mar 2002 14:46:57 -0800 (PST) Received: from wenk (H204.C233.tor.velocet.net [216.138.233.204]) by spitfire.velocet.net (Postfix) with SMTP id AC4A7FB458D for ; Sun, 24 Mar 2002 17:46:56 -0500 (EST) Message-ID: <009d01c1d39f$503adbe0$b300a8c0@wenk> From: "Jeff Shevlen" To: Subject: Postfix "Operation timed out (port 25)" Date: Sun, 24 Mar 2002 17:49:34 -0800 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi, I'm trying to view messages stuck in deferred for debugging purposes. For instance this message is sitting in my maillog: Mar 24 09:28:27 pho88 postfix/smtp[35653]: C746916F: to=, relay=none, delay=22888, status=deferred (connect to smtp.globo.com[200.2 08.9.12]: Operation timed out) ... I've tried using postcat to have a look, but it kaks: # postcat C746916F postcat: fatal: open C746916F: No such file or directory I'm missing something fundamental here, but I don't know what. Jeff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:47:25 2002 Delivered-To: freebsd-questions@freebsd.org Received: from moutvdomng1.kundenserver.de (moutvdomng1.kundenserver.de [212.227.126.181]) by hub.freebsd.org (Postfix) with ESMTP id 9229D37B41F for ; Sun, 24 Mar 2002 14:47:15 -0800 (PST) Received: from [212.227.126.155] (helo=mrvdomng2.kundenserver.de) by moutvdomng1.kundenserver.de with esmtp (Exim 3.22 #2) id 16pGl2-0000hR-00; Sun, 24 Mar 2002 23:46:36 +0100 Received: from [217.1.114.69] (helo=pD9017245.dip.t-dialin.net) by mrvdomng2.kundenserver.de with esmtp (Exim 3.22 #2) id 16pGl2-0008TX-00; Sun, 24 Mar 2002 23:46:36 +0100 Date: Sun, 24 Mar 2002 23:47:23 +0000 (GMT) From: Peter Ulrich Kruppa To: Rik Scarborough Cc: Flemming Froekjaer , Subject: Re: apache/tomcat/mod_jserve ???? In-Reply-To: <20020324223636.GA78855@gruffy.kc.rr.com> Message-ID: <20020324234637.M37851-100000@small.pukruppa.de> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002, Rik Scarborough wrote: > Have you been able to get mod_jk to work with Apache2? I cannot. > The port will not compile unless Apache1 is installed, and then > will not run under Apache2. If I get the newest mod_jk and compile > it, it still will not run under Apache2 on FreeBSD. No, I downgraded to 1.3 . Regards, Uli. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 14:53: 2 2002 Delivered-To: freebsd-questions@freebsd.org Received: from lionsoft.xs4all.nl (lionsoft.xs4all.nl [213.84.78.232]) by hub.freebsd.org (Postfix) with ESMTP id 9298337B404 for ; Sun, 24 Mar 2002 14:52:58 -0800 (PST) Received: from win2kws1 (jacco.lionsoft.nl [10.1.1.20]) by lionsoft.xs4all.nl (8.11.6/8.11.6) with SMTP id g2OMqvd50084 for ; Sun, 24 Mar 2002 23:52:57 +0100 (CET) (envelope-from jacco@lionsoft.xs4all.nl) Reply-To: From: "Jacco" To: "FreeBSD Questions" Subject: ipfw rules - divert Date: Sun, 24 Mar 2002 23:52:57 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hello all, At this moment I have a Freebsd 4.4 machine with 3 NIC's. One connected to the internet, one for my LAN and for machines communicating directly with internet (like Mail and FTP). I would like to divert FTP traffic from the internet-connected NIC to this third NIC. I tried it with "ipfw add divert ...." and it didn't work. Does anyone have a "push" in the right direction to get this working? Thank you in advanve, Jacco To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 15:12: 6 2002 Delivered-To: freebsd-questions@freebsd.org Received: from dev.nethouse.com (what.ifelse.org [208.171.40.202]) by hub.freebsd.org (Postfix) with ESMTP id E1E2837B400 for ; Sun, 24 Mar 2002 15:11:59 -0800 (PST) Received: from fourier.mat (242829hfc118.tampabay.rr.com [24.28.29.118]) by dev.nethouse.com (8.12.2/8.12.2) with ESMTP id g2ONCRdU079912 for ; Sun, 24 Mar 2002 18:12:27 -0500 (EST) (envelope-from btt@nethouse.com) Received: from fourier.mat (localhost.mat [127.0.0.1]) by fourier.mat (8.12.1/8.12.1/Debian -5) with ESMTP id g2ONAaMV000388; Sun, 24 Mar 2002 18:10:36 -0500 Received: (from billt@localhost) by fourier.mat (8.12.1/8.12.1/Debian -5) id g2ONAZbV000386; Sun, 24 Mar 2002 18:10:35 -0500 Date: Sun, 24 Mar 2002 18:10:35 -0500 From: Bill Triplett To: Scott Cc: Jacques Beigbeder , freebsd-questions@FreeBSD.ORG Subject: Re: XFree86 for Asus A7A266 (rev 1.11) + ATI ?? Message-ID: <20020324231035.GA368@fourier.mat> References: <20020323155609.A7253@trefle.ens.fr> <5.1.0.14.0.20020323100830.00bbe878@pop-server.nyc.rr.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5.1.0.14.0.20020323100830.00bbe878@pop-server.nyc.rr.com> User-Agent: Mutt/1.3.27i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sat, Mar 23, 2002 at 10:11:53AM -0500, Scott wrote: > At 15:56 2002/03/23 +0100, Jacques Beigbeder wrote: > >I desperately try to have a working XFree86 for: > > Processor: Athlon > > Motherboard: Asus A7A66-E rev. 1.11 Mine says: ASUS A7A266 ACPI BIOS Revision 1002B http://download.asus.com.tw/mb_dl_menu.asp?l1=1&l2=10&l3=17&mid=2 The changes added with 1009 are: 1. Add IDE ATA133 support. 2. Add ATI AGP display card patch to fix that the system can not execute AGP cycle with ATI AGP display cards. I will see if I can figure out how to flash this thing to 1009. That is something I've never done. I will have to find a way to make a bootable DOS disk for the flash program. > > FreeBSD 4.5 > > ATI Rage 128 Pro PF Setup here is: Athlon 1.4 A7A266 ATI All In Wonder Rage 128 Pro AGP 32MB XFree 4.2.0 (No DRI or agpgart or anything.) I can't even get a decent panic... just freezes :( > Not sure about the A7A66--however, there is a bug report from 4.3 Release, > recently modified but not fixed yet (I tried again last night) for the > A7A266 > > PR 28418 > IIRC the person who was working on it was wondering were some other ASUS > boards also causing problems. > > Here's the link > > http://www.freebsd.org/cgi/query-pr.cgi?pr=28418 Put me on the list of testers if anyone is working on this... I can update this box to -current if necessary. It runs today's -stable ATM. Cheers, Bill To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 15:17: 3 2002 Delivered-To: freebsd-questions@freebsd.org Received: from nycsmtp1out.rdc-nyc.rr.com (nycsmtp1out.rdc-nyc.rr.com [24.29.99.226]) by hub.freebsd.org (Postfix) with ESMTP id A2B6A37B400 for ; Sun, 24 Mar 2002 15:16:59 -0800 (PST) Received: from scottro11.homeunix.net (24-168-24-239.nyc.rr.com [24.168.24.239]) by nycsmtp1out.rdc-nyc.rr.com (8.12.1/Road Runner SMTP Server 1.0) with SMTP id g2ONFhZB020023; Sun, 24 Mar 2002 18:15:43 -0500 (EST) Date: Sun, 24 Mar 2002 18:17:18 -0500 From: Scott Robbins To: Bill Triplett Cc: Jacques.Beigbeder@ens.fr, freebsd-questions@FreeBSD.ORG Subject: Re: XFree86 for Asus A7A266 (rev 1.11) + ATI ?? Message-Id: <20020324181718.35436173.scottro@nyc.rr.com> In-Reply-To: <20020324231035.GA368@fourier.mat> References: <20020323155609.A7253@trefle.ens.fr> <5.1.0.14.0.20020323100830.00bbe878@pop-server.nyc.rr.com> <20020324231035.GA368@fourier.mat> X-Mailer: Sylpheed version 0.7.0 (GTK+ 1.2.10; i386--freebsd4.5) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG On Sun, 24 Mar 2002 18:10:35 -0500 Bill Triplett wrote: > On Sat, Mar 23, 2002 at 10:11:53AM -0500, Scott wrote: > > At 15:56 2002/03/23 +0100, Jacques Beigbeder wrote: > > >I desperately try to have a working XFree86 for: > > > Processor: Athlon > > > Motherboard: Asus A7A66-E rev. 1.11 > > Mine says: > > ASUS A7A266 ACPI BIOS Revision 1002B > > http://download.asus.com.tw/mb_dl_menu.asp?l1=1&l2=10&l3=17&mid=2 > > The changes added with 1009 are: > > 1. Add IDE ATA133 support. > 2. Add ATI AGP display card patch to fix that the system > can not execute AGP cycle with ATI AGP display cards. > > I will see if I can figure out how to flash this thing to 1009. That > is something I've never done. I will have to find a way to make a > bootable DOS disk for the flash program. Jaques wrote the fellow in charge of the problem report and got back a patch that worked for him--as for me, in the interim, a misguided install of NetBSD made it, err, necessary to reinstall--installing XFree 4.2 on the other box as I type--I will post the patch and its use if I get it to work right. :) Scott > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 15:25:14 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.mango-bay.com (mail.mango-bay.com [208.206.15.12]) by hub.freebsd.org (Postfix) with ESMTP id DFD8237B476 for ; Sun, 24 Mar 2002 15:24:43 -0800 (PST) Received: from barbish ([63.70.155.13]) by mail.mango-bay.com (Post.Office MTA v3.5.3 release 223 ID# 0-52377U2500L250S0V35) with SMTP id com; Sun, 24 Mar 2002 18:24:42 -0500 From: "Joe & Fhe Barbish" To: "Jeff Shevlen" Cc: "FBSDQ" Subject: RE: Postfix "Operation timed out (port 25)" Date: Sun, 24 Mar 2002 18:24:39 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 In-Reply-To: <009d01c1d39f$503adbe0$b300a8c0@wenk> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Why not just edit the file if you want to see it's content. Postfix uses the standard sendmail postoffice layout. /var/mail/loginID Just edit that file, or login as that loginID and issue the mail command on the command line to get his mail. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jeff Shevlen Sent: Sunday, March 24, 2002 8:50 PM To: freebsd-questions@FreeBSD.ORG Subject: Postfix "Operation timed out (port 25)" Hi, I'm trying to view messages stuck in deferred for debugging purposes. For instance this message is sitting in my maillog: Mar 24 09:28:27 pho88 postfix/smtp[35653]: C746916F: to=, relay=none, delay=22888, status=deferred (connect to smtp.globo.com[200.2 08.9.12]: Operation timed out) ... I've tried using postcat to have a look, but it kaks: # postcat C746916F postcat: fatal: open C746916F: No such file or directory I'm missing something fundamental here, but I don't know what. Jeff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 15:34:10 2002 Delivered-To: freebsd-questions@freebsd.org Received: from spitfire.velocet.net (spitfire.velocet.net [216.138.223.227]) by hub.freebsd.org (Postfix) with ESMTP id D7F0937B404 for ; Sun, 24 Mar 2002 15:33:59 -0800 (PST) Received: from wenk (H204.C233.tor.velocet.net [216.138.233.204]) by spitfire.velocet.net (Postfix) with SMTP id 306BFFB4540; Sun, 24 Mar 2002 18:33:57 -0500 (EST) Message-ID: <011801c1d3a5$e297fa80$b300a8c0@wenk> From: "Jeff Shevlen" To: "Joe & Fhe Barbish" Cc: "FBSDQ" References: Subject: Re: Postfix "Operation timed out (port 25)" Date: Sun, 24 Mar 2002 18:36:34 -0800 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG For the record, the following will post everything in deferred to stdout # find /var/spool/postfix/deferred/ -type f -print | xargs postcat | more Also, I should apologise. I've mixed up the subject line of this email with the wrong question in the message body. I meant to send this question to postfix-questions. I'm resending my question with a similar subject heading. My mistake, : Why not just edit the file if you want to see it's content. Postfix uses the : standard sendmail postoffice layout. /var/mail/loginID Just edit that : file, or login as that loginID and issue the mail command on the command : line to get his mail. : : -----Original Message----- : From: owner-freebsd-questions@FreeBSD.ORG : [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Jeff Shevlen : Sent: Sunday, March 24, 2002 8:50 PM : To: freebsd-questions@FreeBSD.ORG : Subject: Postfix "Operation timed out (port 25)" : : Hi, : : I'm trying to view messages stuck in deferred for debugging purposes. : For instance this message is sitting in my maillog: : : Mar 24 09:28:27 pho88 postfix/smtp[35653]: C746916F: : to=, relay=none, delay=22888, status=deferred : (connect to smtp.globo.com[200.2 : 08.9.12]: Operation timed out) : : ... I've tried using postcat to have a look, but it kaks: : : # postcat C746916F : postcat: fatal: open C746916F: No such file or directory : : I'm missing something fundamental here, but I don't know what. : : Jeff : : : : : To Unsubscribe: send mail to majordomo@FreeBSD.org : with "unsubscribe freebsd-questions" in the body of the message : : To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 15:42: 4 2002 Delivered-To: freebsd-questions@freebsd.org Received: from tninet.se (sheridan.tninet.se [195.100.94.102]) by hub.freebsd.org (Postfix) with ESMTP id 0F3B737B404 for ; Sun, 24 Mar 2002 15:42:02 -0800 (PST) Received: from cs.umu.se (h27n1c1o1023.bredband.skanova.com [213.64.164.27]) by sheridan.tninet.se (BMR ErlangTM/OTP 3.0) with ESMTP id 439766.13320.1017.1s14078380sheridan for ; Mon, 25 Mar 2002 00:42:00 +0100 Message-ID: <3C9E6449.9CC4D4E3@cs.umu.se> Date: Mon, 25 Mar 2002 00:42:01 +0100 From: Paul Everlund X-Mailer: Mozilla 4.77 [en] (Windows NT 5.0; U) X-Accept-Language: sv,en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: HDD > 8.4 GB Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Hi! This is not a FreeBSD-related question, but as people here seems to know a lot about computers and hardware I give it a try: Do anyone know if there exist a HDD controller card for the ISA bus that allows me to put a HDD > 8.4 GB in my old 486? Best regards, Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 15:45:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from smtp018.mail.yahoo.com (smtp018.mail.yahoo.com [216.136.174.115]) by hub.freebsd.org (Postfix) with SMTP id 1B47D37B400 for ; Sun, 24 Mar 2002 15:45:39 -0800 (PST) Received: from l0ckness (AUTH login) at mix-nancy-106-2-137.abo.wanadoo.fr (HELO athlon) (l0ckness@193.249.112.137) by smtp.mail.vip.sc5.yahoo.com with SMTP; 24 Mar 2002 23:45:38 -0000 Message-ID: <000801c1d38d$ffcbcb80$8970f9c1@athlon> From: "Jean-Romain \"Lockness\"" To: Subject: IBM PC Server and FreeBSD Date: Mon, 25 Mar 2002 00:45:34 +0100 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C1D396.5F9C79D0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1D396.5F9C79D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I have got an IBM PC Server 330 but Linux doesn't work (due to the = ServeRAID driver / device).=20 As I want to intall a UNIX-like OS, I want to know if FreeBSD works = on this model (IBM PC Server 330) ? Jean-Romain PAC. .........................................................................= .............. > E-mail : l0ckness@yahoo.fr .........................................................................= .............. ------=_NextPart_000_0005_01C1D396.5F9C79D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hello,
 
    I have got an IBM PC = Server 330=20 but Linux doesn't work (due to the ServeRAID driver / device). =
 
    As I want to intall = a UNIX-like=20 OS, I want to know if FreeBSD works on this model (IBM PC Server 330)=20 ?
 
Jean-Romain PAC.
................................................................= .......................
 =20 >  E-mail : l0ckness@yahoo.fr
..............= .........................................................................=
------=_NextPart_000_0005_01C1D396.5F9C79D0-- _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 15:56:43 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mailout02.sul.t-online.com (mailout02.sul.t-online.com [194.25.134.17]) by hub.freebsd.org (Postfix) with ESMTP id B872F37B405 for ; Sun, 24 Mar 2002 15:56:38 -0800 (PST) Received: from fwd08.sul.t-online.de by mailout02.sul.t-online.com with smtp id 16pHgb-0006ne-01; Mon, 25 Mar 2002 00:46:05 +0100 Received: from bender (310048585289-0001@[217.80.84.45]) by fwd08.sul.t-online.com with smtp id 16pHgO-0hQ4noC; Mon, 25 Mar 2002 00:45:52 +0100 Message-ID: <003a01c1d38e$155df360$594bfea9@bender> From: Jeff.Kelly@t-online.de (=?iso-8859-1?Q?Christian_Fl=FCgel?=) To: "Andrew Boothman" Cc: "Dillion Klein" , References: <002301c1d326$64a30db0$594bfea9@bender> <3C9DF439.3050305@cream.org> Subject: Re: NTFS w/ FreeBSD dual boot Date: Mon, 25 Mar 2002 00:46:13 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-Sender: 310048585289-0001@t-dialin.net Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG ----- Original Message ----- From: "Andrew Boothman" To: "Christian Flügel" Cc: "Dillion Klein" ; Sent: Sunday, March 24, 2002 4:43 PM Subject: Re: NTFS w/ FreeBSD dual boot > That's an interesting method of dual-booting Christian, I presume this > uses the NT Loader to select between the different OS's. yes it uses the NT Bootmanager to select between the partitions. > I can report, however, that I had no problem using FreeBSD's boot > manager to select between Win2K and FreeBSD. Perhaps this is easier for > a new user? The NT Bootmanager is already there so why not use it? But you can also use the FreeBSD Bootmanager to select partitions its just a matter of personal preference. I have just recommended the method I am more familiar with. Regards Christian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 16:18:38 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.cableone.net (mail4.cableone.net [24.116.0.62]) by hub.freebsd.org (Postfix) with ESMTP id 57F1937B419 for ; Sun, 24 Mar 2002 16:17:59 -0800 (PST) Received: from mobile2.cableone.net ([24.116.49.212]) by mail4.cableone.net with Microsoft SMTPSVC(5.5.1877.447.44); Sun, 24 Mar 2002 17:16:28 -0700 Date: Sun, 24 Mar 2002 18:17:41 -0600 (CST) From: Denny White To: S Roberts Cc: Subject: Re: GotMail stopped working? In-Reply-To: Message-ID: <20020324181553.A1134-100000@mobile2.cableone.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Did you read the docs on Gotmail? There's a warning that it may not keep working if the page structure on Hotmail is changed. On Sun, 24 Mar 2002, S Roberts wrote: > Date: Sun, 24 Mar 2002 10:13:27 +0000 > From: S Roberts > To: freebsd-questions@FreeBSD.ORG > Subject: GotMail stopped working? > > Hello Everyone, > Has anyone using GotMail seen that its stopped working recently? > > My FreeBSD 4.5 Stable machine was offline for 8 days (box was being moved to > a another site), but when it came back up, I get an error about HotMail > changing their page structure. > > Thanks to all that my have some pointers on this. > > Stacey > > > _________________________________________________________________ > Send and receive Hotmail on your mobile device: http://mobile.msn.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Never eat more than you can lift. Miss Piggy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE8nmyxy0Ty5RZE55oRAvyNAJ0RGFM34YlkUF2uSiY7SIN00LrDVwCgiFbZ wqG8xaXPh3T/5+MXLlbEfLE= =gkHV -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 16:26:26 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mail.radzinschi.com (pcp284510pcs.owngsm01.md.comcast.net [68.54.240.17]) by hub.freebsd.org (Postfix) with ESMTP id E05B637B416 for ; Sun, 24 Mar 2002 16:26:17 -0800 (PST) Received: from localhost (marco@localhost.radzinschi.com [127.0.0.1]) by mail.radzinschi.com (8.11.6/8.11.6) with ESMTP id g2P0Q6584967; Sun, 24 Mar 2002 19:26:06 -0500 (EST) (envelope-from marco@radzinschi.com) Date: Sun, 24 Mar 2002 19:26:06 -0500 (EST) From: Marco Radzinschi To: Paul Everlund Cc: Subject: Re: HDD > 8.4 GB In-Reply-To: <3C9E6449.9CC4D4E3@cs.umu.se> Message-ID: <20020324192138.J84925-100000@mail.radzinschi.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG For a non-Unix operating system, any ISA IDE controller dated after 1994 should allow you to do this. I have a cheap one from 1997 which I am sure supports this, but FreeBSD will not recognize it. If you are going to install *BSD or Linux on that 486, then you don't need a new controller. All you have to do is either not make the big disk the boot drive, or make sure the root partition is in the first 8.4 GB. I can't imagine anyone needing a larger boot partition, unless one is going to make one large root partition. Once the BIOS boots *BSD or Linux, the operating system will no longer use the BIOS, and will be able to use the entire disk. The only caveat is that you will manually have to tell the OS the disk drive geometry, so that it does not use what the BIOS gives it, which will obviously be wrong. Marco Radzinschi E-Mail: marco@radzinschi.com AOL IM: CrackedBoy On Mon, 25 Mar 2002, Paul Everlund wrote: > Hi! > > This is not a FreeBSD-related question, but as people here seems to > know a lot about computers and hardware I give it a try: > > Do anyone know if there exist a HDD controller card for the ISA bus > that allows me to put a HDD > 8.4 GB in my old 486? > > Best regards, > Paul > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 16:26:33 2002 Delivered-To: freebsd-questions@freebsd.org Received: from mired.org (dsl-64-192-6-133.telocity.com [64.192.6.133]) by hub.freebsd.org (Postfix) with SMTP id A69BA37B405 for ; Sun, 24 Mar 2002 16:26:26 -0800 (PST) Received: (qmail 92485 invoked by uid 100); 25 Mar 2002 00:26:21 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <15518.28332.691125.587105@guru.mired.org> Date: Sun, 24 Mar 2002 18:26:20 -0600 To: Scott Mitchell Cc: "Gary W. Swearingen" , Per olof Ljungmark , freebsd-questions@FreeBSD.ORG Subject: Re: Switching between kernels In-Reply-To: <20020324223626.G281@fishballoon.dyndns.org> References: <200203241500.g2OF02U62813@dns2.s.bonet.se> <20020324163052.C281@fishballoon.dyndns.org> <20020324223626.G281@fishballoon.dyndns.org> X-Mailer: VM 6.90 under 21.1 (patch 14) "Cuyahoga Valley" XEmacs Lucid X-face: "5Mnwy%?j>IIV\)A=):rjWL~NB2aH[}Yq8Z=u~vJ`"(,&SiLvbbz2W`;h9L,Yg`+vb1>RG% *h+%X^n0EZd>TM8_IB;a8F?(Fb"lw'IgCoyM.[Lg#r\ From: Mike Meyer X-Delivery-Agent: TMDA/0.49 (Python 2.2 on freebsd4) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG In <20020324223626.G281@fishballoon.dyndns.org>, Scott Mitchell typed: > On Sun, Mar 24, 2002 at 02:23:53PM -0800, Gary W. Swearingen wrote: > > Scott Mitchell writes: > > > Just hit a key to break out of the autoboot countdown, then: > > > boot kernel.PCM > > > or whatever you called the alternative kernel. > > Might he need to do something with modules.PCM? > > (The Handbook and loader(8) manual are too sketchy.)) That's because the truth is variable. Most modules don't care about most compile-time options. A few do care about some. > Since both of Per's kernels are built from the same sources and identical > except for the SMP/PCM options, either should work with the same set of > modules. You're probably right. On the other hand, it wouldn't surprise me if some modules changed because of SMP. PCM is available as a module itself, so that shouldn't change anything. http://www.mired.org/home/mwm/ Independent WWW/Perforce/FreeBSD/Unix consultant, email for more information. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Mar 24 16:29: 1 2002 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f255.law11.hotmail.com [64.4.16.130]) by hub.freebsd.org (Postfix) with ESMTP id 6E92D37B400 for ; Sun, 24 Mar 2002 16:28:55 -0800 (PST) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 24 Mar 2002 16:28:55 -0800 Received: from 208.151.119.232 by lw11fd.law11.hotmail.msn.com with HTTP; Mon, 25 Mar 2002 00:28:54 GMT X-Originating-IP: [208.151.119.232] From: "Chad Kline" To: questions@freebsd.org Subject: olympus c-1 (d-150) Date: Mon, 25 Mar 2002 00:28:54 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 25 Mar 2002 00:28:55.0270 (UTC) FILETIME=[0BFAF060:01C1D394] Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG i got a nice camera (Olympus D-150) for $150 (Costco). and after spending days with the 'udsc' patch and 'camediaplay', i found out that that isn't going to work. olympus docs state it is a 'USB storage class interface', and the developer of 'udsc' device driver recommended i try the 'umass' driver. i would like to hear from anyone that accomplished anything similar. i am hoping the SmartMedia disk inside the camera will be automatically mounted by usbd ????? i see in /usr/src/sys/dev/usb/umass.c that support for the Olympus C-1 has been added. usbdevs detects my Olympus D-150 (US model #) as an Olympus C-1 (Japanese model #). when i boot with the camera plugged in, or when i run "camcontrol rescan 0", i get the following umass errors. i can't mount /dev/da0a or /dev/da0s1 or any combination thereof. i can't find anything in log files or on the WWW or maillists. ideas/suggestions appreciated. please Cc off-list. thank you. Mar 23 23:24:29 en26 /kernel: ohci0: mem 0xe1000000-0xe1000fff irq 10 at device 19.0 on pci0 Mar 23 23:24:29 en26 /kernel: usb0: OHCI version 1.0, legacy support Mar 23 23:24:29 en26 /kernel: usb0: on ohci0 Mar 23 23:24:29 en26 /kernel: usb0: USB revision 1.0 Mar 23 23:24:29 en26 /kernel: uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Mar 23 23:24:29 en26 /kernel: uhub0: 2 ports with 2 removable, self powered Mar 23 23:24:29 en26 /kernel: umass0: OLYMPUS C-1Z,D-150Z, rev 1.10/10.15, addr 2 Mar 23 23:24:29 en26 /kernel: orm0: