Date: Thu, 24 Aug 2006 01:39:43 -0500 From: "Nikolas Britton" <nikolas.britton@gmail.com> To: "Andreas Klemm" <andreas@freebsd.org> Cc: amd64@freebsd.org, stable@freebsd.org Subject: Re: suggestions for SATA RAID cards Message-ID: <ef10de9a0608232339x4829d571wac8867b0f3c5f342@mail.gmail.com> In-Reply-To: <20060824053618.GA7211@titan.klemm.apsfilter.org> References: <44EC0B9B.5020705@withagen.nl> <003f01c6c68d$64688e60$b3db87d4@multiplay.co.uk> <20060824053618.GA7211@titan.klemm.apsfilter.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 8/24/06, Andreas Klemm <andreas@freebsd.org> wrote: > On Wed, Aug 23, 2006 at 09:23:00AM +0100, Steven Hartland wrote: > > The Areca cards I can recommend. Highpoint 1820a is surprisingly good > > Many many years ago I bought a HighPoint HPT366 ATA66 controller. > Thought its a good deal because it was cheap. > Thought, an ATA interface can't be that complicated anymore > so that its safe to buy a cheap product. > > Turned out that I was very wrong with my theorie. > I ran into timeout problems, that couldn't be fixed. > > After days and nights of troubleshooting and testing > I didn't get it to work reliably. > > I replaced it by buying a more expensive Promise controller. > Since then I had zero problems. > > Since that time I lost trust in HighPoint products. > > Good stuff has its price. It must not always be the > most expensive hardware. But going with the cheapest > (and I assume the HighPoint product will again be > in the low price segment) can be troublesome. > As the owner of a HPT2220 and HPT1820A I have nothing but good things to say about it. In fact my experience is the inverse of yours. I've had nothing but problems with my Promise card. To make matters worse Promise doesn't support FreeBSD... No drivers, No docs, Nothing. HighPoint does support FreeBSD by providing their own FreeBSD drivers and HighPoint's code is in FreeBSD. The one bad thing I have to say about HighPoint is that their drivers are locked up in binary blobs. Areca's drivers on the other hand are fully open sourced and they have the fastest SATA hardware in the land thanks to the onboard 600MHz Intel XScale IOP and DDR333 cache. http://tweakers.net/reviews/557/1 Their new hardware (coming soon) will have a 800MHz XScale with DDR2-533 cache. This is from an ARC-1220 with 256MB cache and 7x300GB drives in RAID6: > diskinfo -t da0 da0 512 # sectorsize 1499999764480 # mediasize in bytes (1.4T) 2929687040 # mediasize in sectors 182364 # Cylinders according to firmware. 255 # Heads according to firmware. 63 # Sectors according to firmware. Seek times: Full stroke: 250 iter in 5.022332 sec = 20.089 msec Half stroke: 250 iter in 3.809019 sec = 15.236 msec Quarter stroke: 500 iter in 4.055315 sec = 8.111 msec Short forward: 400 iter in 0.998948 sec = 2.497 msec Short backward: 400 iter in 2.519062 sec = 6.298 msec Seq outer: 2048 iter in 0.187788 sec = 0.092 msec Seq inner: 2048 iter in 0.219632 sec = 0.107 msec Transfer rates: outside: 102400 kbytes in 0.353485 sec = 289687 kbytes/sec middle: 102400 kbytes in 0.372773 sec = 274698 kbytes/sec inside: 102400 kbytes in 0.543272 sec = 188488 kbytes/sec Chad Leigh has an ARC-1130 with 1GB cache and he's getting even better numbers (300~400MB/s) using ZFS + Solaris Express. -- BSD Podcasts @: http://bsdtalk.blogspot.com/ http://freebsdforall.blogspot.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ef10de9a0608232339x4829d571wac8867b0f3c5f342>