Date: Thu, 3 Jan 2013 15:19:17 +0900 From: YongHyeon PYUN <pyunyh@gmail.com> To: Daniel Braniss <danny@cs.huji.ac.il> Cc: freebsd-stable@freebsd.org Subject: Re: stable 9.1, bge and ipmi not cooperating Message-ID: <20130103061917.GB1434@michelle.cdnetworks.com> In-Reply-To: <E1TqHtV-000Jiu-SS@kabab.cs.huji.ac.il> References: <E1TqHtV-000Jiu-SS@kabab.cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jan 02, 2013 at 08:33:41AM +0200, Daniel Braniss wrote: > Hi, > the last batch of changes to bge caused the ipmi to stop working on a > Sun Fire X2200 M2, and > bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem > 0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 4.0 on pci6 > bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz > miibus2: <MII bus> on bge0 > > bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x009003> mem > 0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at device 4.1 on pci6 > bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz > miibus3: <MII bus> on bge1 > Could you narrow down which revision broke IPMI? And what problems are you seeing? I don't have IPMI-capable controller to test. IPMI support for old controllers(pre-5717 controllers) was not complete and it was luck if it worked on a couple of controllers.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130103061917.GB1434>