Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 24 Feb 2001 18:10:03 -0800
From:      Kent Stewart <kstewart@urx.com>
To:        Otter <otterr@telocity.com>
Cc:        'Odhiambo Washington' <wash@iconnect.co.ke>, lucas@slb.to, "Questions@Freebsd. Org (E-mail)" <questions@freebsd.org>
Subject:   Re: setting up a firewall (Was: dual homed host)
Message-ID:  <3A98697B.E035F62E@urx.com>
References:  <000101c09ed0$26e87a90$1401a8c0@zoso>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help


Otter wrote:
> 
> > -----Original Message-----
> > From: owner-freebsd-questions@FreeBSD.ORG
> > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Odhiambo
> > Washington
> > Sent: Saturday, February 24, 2001 1:32 AM
> > To: freebsd-questions@freebsd.org
> > Cc: lucas@slb.to
> > Subject: Re: setting up a firewall (Was: dual homed host)
> >
> >
> > * Lucas Bergman <lucas@slb.to> [20010223 23:14]: writing on
> > the subject 'Re: setting up a firewall (Was: dual homed host)'
> > Lucas> > i am setting up a firewall and i have been battling
> > with getting the
> > Lucas> > damn things to work together.. i am using sysinstall
> > to chagne the
> > Lucas> > ip addys and the dns entries and the mask etc etc.
> > I set de0 up
> > Lucas> > for the live ip (internet ip from my ISP) and i set
> > up dc0 with the
> > Lucas> > dead ip (192.168.0.1 or 192.168.0.2) not sure which
> > one i should
> > Lucas> > use.
> > Lucas>
> >
> >
> > May I kindly request your assistance here on a different plane.
> > Can you please tell me who the manufacturer of the card dc0 is?
> > I have such a card but I also need to use it with Windows but I
> > cannot get it's drivers.
> > If you can lead me to their web site I'll very much appreciate.
> >
> >
> > -Wash
> >
> Odhiambo,
> dc0 covers a few cards. My dc card is a NetGear FA310TX. The 311/312's
> are covered by the sis driver, so you can rule those out, if in fact
> it is a NetGear. I'm not sure what else is included with the driver.
> Maybe a look around the docs... the man page for dc is a calculator.
> bleh.

If you do a "man -k dc", you will find a dc(4) that, by doing a "man 4
dc" is a

dc - DEC/Intel 21143 and clone 10/100 ethernet driver

Kent

> 
> Lucas,
> If you're using NAT to do that, getting network functionality is very
> well documented in the natd man page. You can tighten it up from there
> in ipfw. Also, check out
> http://www.mostgraveconcern.com/freebsd/ipfw.html
> -Otter
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message

-- 
Kent Stewart
Richland, WA

mailto:kbstew99@hotmail.com
http://kstewart.urx.com/kstewart/index.html
FreeBSD News http://daily.daemonnews.org/

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?3A98697B.E035F62E>