Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 23 Mar 2012 20:58:28 +0000 (UTC)
From:      John Baldwin <jhb@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org
Subject:   svn commit: r233396 - stable/8/share/man/man9
Message-ID:  <201203232058.q2NKwSpl094030@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: jhb
Date: Fri Mar 23 20:58:27 2012
New Revision: 233396
URL: http://svn.freebsd.org/changeset/base/233396

Log:
  MFC 232362,232363,232463,232553,232569,232571:
  - Sort function prototypes.
  - Update the documentation on pci_get/set_powerstate().  These methods are
    not ACPI-specific at all, but deal with PCI power states.  Also,
    pci_set_powerstate() fails with EOPNOTSUPP if a request is made that the
    underlying device does not support rather than falling back to somehow
    setting D0.
  - Document the following routines: pci_alloc_msi(), pci_alloc_msix(),
    pci_find_cap(), pci_get_max_read_req(), pci_get_vpd_ident(),
    pci_get_vpd_readonly(), pci_msi_count(), pci_msix_count(),
    pci_pending_msix(), pci_release_msi(),  pci_remap_msix(), and
    pci_set_max_read_req().
  - Group the functions into five sub-sections: raw configuration access,
    locating devices, device information, device configuration, and
    message signaled interrupts.
  - Discourage use of pci_disable_io() and pci_enable_io() in device drivers.
    The PCI bus driver handles this automatically as resources are activated.

Modified:
  stable/8/share/man/man9/Makefile
  stable/8/share/man/man9/pci.9
Directory Properties:
  stable/8/share/man/man9/   (props changed)

Modified: stable/8/share/man/man9/Makefile
==============================================================================
--- stable/8/share/man/man9/Makefile	Fri Mar 23 20:58:18 2012	(r233395)
+++ stable/8/share/man/man9/Makefile	Fri Mar 23 20:58:27 2012	(r233396)
@@ -935,18 +935,30 @@ MLINKS+=namei.9 NDFREE.9 \
 MLINKS+=pbuf.9 getpbuf.9 \
 	pbuf.9 relpbuf.9 \
 	pbuf.9 trypbuf.9
-MLINKS+=pci.9 pci_disable_busmaster.9 \
+MLINKS+=pci.9 pci_alloc_msi.9 \
+	pci.9 pci_alloc_msix.9 \
+	pci.9 pci_disable_busmaster.9 \
 	pci.9 pci_disable_io.9 \
 	pci.9 pci_enable_busmaster.9 \
 	pci.9 pci_enable_io.9 \
 	pci.9 pci_find_bsf.9 \
+	pci.9 pci_find_cap.9 \
 	pci.9 pci_find_dbsf.9 \
 	pci.9 pci_find_device.9 \
+	pci.9 pci_get_max_read_req.9 \
 	pci.9 pci_get_powerstate.9 \
+	pci.9 pci_get_vpd_ident.9 \
+	pci.9 pci_get_vpd_readonly.9 \
+	pci.9 pci_msi_count.9 \
+	pci.9 pci_msix_count.9 \
+	pci.9 pci_pending_msix.9 \
 	pci.9 pci_read_config.9 \
+	pci.9 pci_release_msi.9 \
+	pci.9 pci_remap_msix.9 \
 	pci.9 pci_restore_state.9 \
 	pci.9 pci_save_state.9 \
 	pci.9 pci_set_powerstate.9 \
+	pci.9 pci_set_max_read_req.9 \
 	pci.9 pci_write_config.9
 MLINKS+=pfil.9 pfil_add_hook.9 \
 	pfil.9 pfil_hook_get.9 \

Modified: stable/8/share/man/man9/pci.9
==============================================================================
--- stable/8/share/man/man9/pci.9	Fri Mar 23 20:58:18 2012	(r233395)
+++ stable/8/share/man/man9/pci.9	Fri Mar 23 20:58:27 2012	(r233396)
@@ -25,61 +25,103 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd September 30, 2007
+.Dd March 5, 2012
 .Dt PCI 9
 .Os
 .Sh NAME
 .Nm pci ,
-.Nm pci_read_config ,
-.Nm pci_write_config ,
-.Nm pci_enable_busmaster ,
+.Nm pci_alloc_msi ,
+.Nm pci_alloc_msix ,
 .Nm pci_disable_busmaster ,
-.Nm pci_enable_io ,
 .Nm pci_disable_io ,
-.Nm pci_set_powerstate ,
-.Nm pci_get_powerstate ,
-.Nm pci_save_state ,
-.Nm pci_restore_state ,
+.Nm pci_enable_busmaster ,
+.Nm pci_enable_io ,
 .Nm pci_find_bsf ,
+.Nm pci_find_cap ,
 .Nm pci_find_dbsf ,
-.Nm pci_find_device
+.Nm pci_find_device ,
+.Nm pci_get_max_read_req ,
+.Nm pci_get_powerstate ,
+.Nm pci_get_vpd_ident ,
+.Nm pci_get_vpd_readonly ,
+.Nm pci_msi_count ,
+.Nm pci_msix_count ,
+.Nm pci_pending_msix ,
+.Nm pci_read_config ,
+.Nm pci_release_msi ,
+.Nm pci_remap_msix ,
+.Nm pci_restore_state ,
+.Nm pci_save_state ,
+.Nm pci_set_max_read_req ,
+.Nm pci_set_powerstate ,
+.Nm pci_write_config
 .Nd PCI bus interface
 .Sh SYNOPSIS
 .In sys/bus.h
-.In dev/pci/pcivar.h
 .In dev/pci/pcireg.h
-.In machine/pci_cfgreg.h
-.Ft void
-.Fn pci_write_config "device_t dev" "int reg" "uint32_t val" "int width"
+.In dev/pci/pcivar.h
 .Ft int
-.Fn pci_enable_busmaster "device_t dev"
+.Fn pci_alloc_msi "device_t dev" "int *count"
+.Ft int
+.Fn pci_alloc_msix "device_t dev" "int *count"
 .Ft int
 .Fn pci_disable_busmaster "device_t dev"
 .Ft int
+.Fn pci_disable_io "device_t dev" "int space"
+.Ft int
+.Fn pci_enable_busmaster "device_t dev"
+.Ft int
 .Fn pci_enable_io "device_t dev" "int space"
+.Ft device_t
+.Fn pci_find_bsf "uint8_t bus" "uint8_t slot" "uint8_t func"
 .Ft int
-.Fn pci_disable_io "device_t dev" "int space"
+.Fn pci_find_cap "device_t dev" "int capability" "int *capreg"
+.Ft device_t
+.Fn pci_find_dbsf "uint32_t domain" "uint8_t bus" "uint8_t slot" "uint8_t func"
+.Ft device_t
+.Fn pci_find_device "uint16_t vendor" "uint16_t device"
 .Ft int
-.Fn pci_set_powerstate "device_t dev" "int state"
+.Fn pci_get_max_read_req "device_t dev"
 .Ft int
 .Fn pci_get_powerstate "device_t dev"
+.Ft int
+.Fn pci_get_vpd_ident "device_t dev" "const char **identptr"
+.Ft int
+.Fn pci_get_vpd_readonly "device_t dev" "const char *kw" "const char **vptr"
+.Ft int
+.Fn pci_msi_count "device_t dev"
+.Ft int
+.Fn pci_msix_count "device_t dev"
+.Ft int
+.Fn pci_pending_msix "device_t dev" "u_int index"
 .Ft uint32_t
 .Fn pci_read_config "device_t dev" "int reg" "int width"
+.Ft int
+.Fn pci_release_msi "device_t dev"
+.Ft int
+.Fn pci_remap_msix "device_t dev" "int count" "const u_int *vectors"
+.Ft void
+.Fn pci_restore_state "device_t dev"
 .Ft void
 .Fn pci_save_state "device_t dev"
+.Ft int
+.Fn pci_set_max_read_req "device_t dev" "int size"
+.Ft int
+.Fn pci_set_powerstate "device_t dev" "int state"
 .Ft void
-.Fn pci_restore_state "device_t dev"
-.Ft device_t
-.Fn pci_find_bsf "uint8_t bus" "uint8_t slot" "uint8_t func"
-.Ft device_t
-.Fn pci_find_dbsf "uint32_t domain" "uint8_t bus" "uint8_t slot" "uint8_t func"
-.Ft device_t
-.Fn pci_find_device "uint16_t vendor" "uint16_t device"
+.Fn pci_write_config "device_t dev" "int reg" "uint32_t val" "int width"
 .Sh DESCRIPTION
 The
 .Nm
 set of functions are used for managing PCI devices.
-.Pp
+The functions are split into several groups:
+raw configuration access,
+locating devices,
+device information,
+device configuration,
+and
+message signaled interrupts.
+.Ss Raw Configuration Access
 The
 .Fn pci_read_config
 function is used to read data from the PCI configuration
@@ -104,6 +146,126 @@ with
 .Fa width
 specifying the size of the access.
 .Pp
+.Em NOTE :
+Device drivers should only use these functions for functionality that
+is not available via another
+.Fn pci
+function.
+.Ss Locating Devices
+The
+.Fn pci_find_bsf
+function looks up the
+.Vt device_t
+of a PCI device, given its
+.Fa bus ,
+.Fa slot ,
+and
+.Fa func .
+The
+.Fa slot
+number actually refers to the number of the device on the bus,
+which does not necessarily indicate its geographic location
+in terms of a physical slot.
+Note that in case the system has multiple PCI domains,
+the
+.Fn pci_find_bsf
+function only searches the first one.
+Actually, it is equivalent to:
+.Bd -literal -offset indent
+pci_find_dbsf(0, bus, slot, func);
+.Ed
+.Pp
+The
+.Fn pci_find_dbsf
+function looks up the
+.Vt device_t
+of a PCI device, given its
+.Fa domain ,
+.Fa bus ,
+.Fa slot ,
+and
+.Fa func .
+The
+.Fa slot
+number actually refers to the number of the device on the bus,
+which does not necessarily indicate its geographic location
+in terms of a physical slot.
+.Pp
+The
+.Fn pci_find_device
+function looks up the
+.Vt device_t
+of a PCI device, given its
+.Fa vendor
+and
+.Fa device
+IDs.
+Note that there can be multiple matches for this search; this function
+only returns the first matching device.
+.Ss Device Information
+The
+.Fn pci_find_cap
+function is used to locate the first instance of a PCI capability
+register set for the device
+.Fa dev .
+The capability to locate is specified by ID via
+.Fa capability .
+Constant macros of the form
+.Dv PCIY_xxx
+for standard capability IDs are defined in
+.In dev/pci/pcireg.h .
+If the capability is found, then
+.Fa *capreg
+is set to the offset in configuration space of the capability register set,
+and
+.Fn pci_find_cap
+returns zero.
+If the capability is not found or the device does not support capabilities,
+.Fn pci_find_cap
+returns an error.
+.Pp
+The
+.Fn pci_get_vpd_ident
+function is used to fetch a device's Vital Product Data
+.Pq VPD
+identifier string.
+If the device
+.Fa dev
+supports VPD and provides an identifier string,
+then
+.Fa *identptr
+is set to point at a read-only, null-terminated copy of the identifier
+string,
+and
+.Fn pci_get_vpd_ident
+returns zero.
+If the device does not support VPD or does not provide an identifier
+string,
+then
+.Fn pci_get_vpd_ident
+returns an error.
+.Pp
+The
+.Fn pci_get_vpd_readonly
+function is used to fetch the value of a single VPD read-only keyword
+for the device
+.Fa dev .
+The keyword to fetch is identified by the two character string
+.Fa kw .
+If the device supports VPD and provides a read-only value for the
+requested keyword,
+then
+.Fa *vptr
+is set to point at a read-only, null-terminated copy of the value,
+and
+.Fn pci_get_vpd_readonly
+returns zero.
+If the device does not support VPD or does not provide the requested
+keyword,
+then
+.Fn pci_get_vpd_readonly
+returns an error.
+.Ss Device Configuration
 The
 .Fn pci_enable_busmaster
 function enables PCI bus mastering for the device
@@ -138,20 +300,51 @@ argument specifies which resource is aff
 or
 .Dv SYS_RES_IOPORT
 as appropriate.
+Device drivers should generally not use these routines directly.
+The PCI bus will enable decoding automatically when a
+.Dv SYS_RES_MEMORY
+or
+.Dv SYS_RES_IOPORT
+resource is activated via
+.Xr bus_alloc_resource 9
+or
+.Xr bus_activate_resource 9 .
 .Pp
-.Em NOTE :
-These functions should be used in preference to manually manipulating
-the configuration space.
+The
+.Fn pci_get_max_read_req
+function returns the current maximum read request size in bytes for a
+PCI-express device.
+If the
+.Fa dev
+device is not a PCI-express device,
+.Fn pci_get_max_read_req
+returns zero.
+.Pp
+The
+.Fn pci_set_max_read_req
+sets the PCI-express maximum read request size for
+.Fa dev .
+The requested
+.Fa size
+may be adjusted,
+and
+.Fn pci_set_max_read_req
+returns the actual size set in bytes.
+If the
+.Fa dev
+device is not a PCI-express device,
+.Fn pci_set_max_read_req
+returns zero.
 .Pp
 The
 .Fn pci_get_powerstate
-function returns the current ACPI power state of the device
+function returns the current power state of the device
 .Fa dev .
 If the device does not support power management capabilities, then the default
 state of
 .Dv PCI_POWERSTATE_D0
 is returned.
-The following power states are defined by ACPI:
+The following power states are defined by PCI:
 .Bl -hang -width ".Dv PCI_POWERSTATE_UNKNOWN"
 .It Dv PCI_POWERSTATE_D0
 State in which device is on and running.
@@ -183,15 +376,13 @@ The
 .Fn pci_set_powerstate
 function is used to transition the device
 .Fa dev
-to the ACPI power state
+to the PCI power state
 .Fa state .
-It checks to see if the device is PCI 2.2 compliant.
-If so, it checks the
-capabilities pointer to determine which power states the device supports.
-If the device does not have power management capabilities, the default state
-of
-.Dv PCI_POWERSTATE_D0
-is set.
+If the device does not support power management capabilities or
+it does not support the specific power state
+.Fa state ,
+then the function will fail with
+.Er EOPNOTSUPP .
 .Pp
 The
 .Fn pci_save_state
@@ -212,57 +403,216 @@ is invoked,
 then the device will be transitioned to
 .Dv PCI_POWERSTATE_D0
 before any config registers are restored.
-.Pp
-The
-.Fn pci_find_bsf
-function looks up the
-.Vt device_t
-of a PCI device, given its
-.Fa bus ,
-.Fa slot ,
+.Ss Message Signaled Interrupts
+Message Signaled Interrupts
+.Pq MSI
 and
-.Fa func .
+Enhanced Message Signaled Interrupts
+.Pq MSI-X
+are PCI capabilities that provide an alternate method for PCI
+devices to signal interrupts.
+The legacy INTx interrupt is available to PCI devices as a
+.Dv SYS_RES_IRQ
+resource with a resource ID of zero.
+MSI and MSI-X interrupts are available to PCI devices as one or more
+.Dv SYS_RES_IRQ
+resources with resource IDs greater than zero.
+A driver must ask the PCI bus to allocate MSI or MSI-X interrupts
+using
+.Fn pci_alloc_msi
+or
+.Fn pci_alloc_msix
+before it can use MSI or MSI-X
+.Dv SYS_RES_IRQ
+resources.
+A driver is not allowed to use the legacy INTx
+.Dv SYS_RES_IRQ
+resource if MSI or MSI-X interrupts have been allocated,
+and attempts to allocate MSI or MSI-X interrupts will fail if the
+driver is currently using the legacy INTx
+.Dv SYS_RES_IRQ
+resource.
+A driver is only allowed to use either MSI or MSI-X,
+but not both.
+.Pp
+The
+.Fn pci_count_msi
+function returns the maximum number of MSI messages supported by the
+device
+.Fa dev.
+If the device does not support MSI,
+then
+.Fn pci_count_msi
+returns zero.
+.Pp
+The
+.Fn pci_alloc_msi
+function attempts to allocate
+.Fa *count
+MSI messages for the device
+.Fa dev .
 The
-.Fa slot
-number actually refers to the number of the device on the bus,
-which does not necessarily indicate its geographic location
-in terms of a physical slot.
-Note that in case the system has multiple PCI domains,
-the
-.Fn pci_find_bsf
-function only searches the first one.
-Actually, it is equivalent to:
-.Bd -literal -offset indent
-pci_find_dbsf(0, bus, slot, func);
-.Ed
+.Fn pci_alloc_msi
+function may allocate fewer messages than requested for various
+reasons including requests for more messages than the device
+.Fa dev
+supports,
+or if the system has a shortage of available MSI messages.
+On success,
+.Fa *count
+is set to the number of messages allocated and
+.Fn pci_alloc_msi
+returns zero.
+The
+.Dv SYS_RES_IRQ
+resources for the allocated messages will be available at consecutive
+resource IDs beginning with one.
+If
+.Fn pci_alloc_msi
+is not able to allocate any messages,
+it returns an error.
+Note that MSI only supports message counts that are powers of two;
+requests to allocate a non-power of two count of messages will fail.
+.Pp
+The
+.Fn pci_release_msi
+function is used to release any allocated MSI or MSI-X messages back
+to the system.
+If any MSI or MSI-X
+.Dv SYS_RES_IRQ
+resources are allocated by the driver or have a configured interrupt
+handler,
+this function will fail with
+.Er EBUSY .
+The
+.Fn pci_release_msi
+function returns zero on success and an error on failure.
+.Pp
+The
+.Fn pci_count_msix
+function returns the maximum number of MSI-X messages supported by the
+device
+.Fa dev .
+If the device does not support MSI-X,
+then
+.Fn pci_count_msix
+returns zero.
 .Pp
 The
-.Fn pci_find_dbsf
-function looks up the
-.Vt device_t
-of a PCI device, given its
-.Fa domain ,
-.Fa bus ,
-.Fa slot ,
-and
-.Fa func .
+.Fn pci_alloc_msix
+function attempts to allocate
+.Fa *count
+MSI-X messages for the device
+.Fa dev .
 The
-.Fa slot
-number actually refers to the number of the device on the bus,
-which does not necessarily indicate its geographic location
-in terms of a physical slot.
+.Fn pci_alloc_msix
+function may allocate fewer messages than requested for various
+reasons including requests for more messages than the device
+.Fa dev
+supports,
+or if the system has a shortage of available MSI-X messages.
+On success,
+.Fa *count
+is set to the number of messages allocated and
+.Fn pci_alloc_msix
+returns zero.
+For MSI-X messages,
+the resource ID for each
+.Dv SYS_RES_IRQ resource identifies the index in the MSI-X table of the
+corresponding message.
+A resource ID of one maps to the first index of the MSI-X table;
+a resource ID two identifies the second index in the table, etc.
+The
+.Fn pci_alloc_msix
+function assigns the
+.Fa *count
+messages allocated to the first
+.Fa *count
+table indicies.
+If
+.Fn pci_alloc_msix
+is not able to allocate any messages,
+it returns an error.
+Unlike MSI,
+MSI-X does not require message counts that are powers of two.
 .Pp
 The
-.Fn pci_find_device
-function looks up the
-.Vt device_t
-of a PCI device, given its
-.Fa vendor
-and
-.Fa device
-IDs.
-Note that there can be multiple matches for this search; this function
-only returns the first matching device.
+.Fn pci_pending_msix
+function examines the
+.Fa dev
+device's Pending Bit Array
+.Pq PBA
+to determine the pending status of the MSI-X message at table index
+.Fa index .
+If the indicated message is pending,
+this function returns a non-zero value;
+otherwise,
+it returns zero.
+Passing an invalid
+.Fa index
+to this function will result in undefined behavior.
+.Pp
+As mentioned in the description of
+.Fn pci_alloc_msix ,
+MSI-X messages are initially assigned to the first N table entries.
+A driver may use a different distribution of available messages to
+table entries via the
+.Fn pci_remap_msix
+function.
+Note that this function must be called after a succesful call to
+.Fn pci_alloc_msix
+but before any of the
+.Dv SYS_RES_IRQ
+resources are allocated.
+The
+.Fn pci_remap_msix
+function returns zero on success,
+or an error on failure.
+.Pp
+The
+.Fa vectors
+array should contain
+.Fa count
+message vectors.
+The array maps directly to the MSI-X table in that the first entry in
+the array specifies the message used for the first entry in the MSI-X
+table,
+the second entry in the array corresponds to the second entry in the
+MSI-X table,
+etc.
+The vector value in each array index can either be zero to indicate
+that no message should be assigned to the corresponding MSI-X table entry,
+or it can be a number from one to N
+.Po
+where N is the count returned from the previous call to
+.Fn pci_alloc_msix
+.Pc
+to indicate which of the allocated messages should be assigned to the
+corresponding MSI-X table entry.
+.Pp
+If
+.Fn pci_remap_msix
+succeeds,
+each MSI-X table entry with a non-zero vector will have an associated
+.Dv SYS_RES_IRQ
+resource whose resource ID corresponds to the table index as described
+above for
+.Fn pci_alloc_msix .
+MSI-X table entries that with a vector of zero will not have an
+associated
+.Dv SYS_RES_IRQ resource.
+Additionally,
+if any of the original messages allocated by
+.Fn pci_alloc_msix
+are not used in the new distribution of messages in the MSI-X table,
+they will be released automatically.
+Note that if a driver wishes to use fewer messages than were allocated by
+.Fn pci_alloc_msix ,
+the driver must use a single, contiguous range of messages beginning
+with one in the new distribution.
+The
+.Fn pci_remap_msix
+function will fail if this condition is not met.
 .Sh IMPLEMENTATION NOTES
 The
 .Vt pci_addr_t
@@ -295,7 +645,9 @@ space on the target architecture.
 .Re
 .Sh AUTHORS
 This manual page was written by
-.An Bruce M Simpson Aq bms@FreeBSD.org .
+.An Bruce M Simpson Aq bms@FreeBSD.org
+and
+.An John Baldwin Aq jhb@FreeBSD.org .
 .Sh BUGS
 The kernel PCI code has a number of references to
 .Dq "slot numbers" .



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201203232058.q2NKwSpl094030>