Date: Fri, 1 Aug 2003 16:59:10 -0400 From: "Nathan Clark" <nw_clark@yahoo.com> To: <freebsd-mobile@freebsd.org> Subject: Thinkpad 600x and Netgear FA411 PCMCIA card Message-ID: <GKEEKHEJKOHCFKDCPNJBKEAICGAA.nw_clark@yahoo.com>
next in thread | raw e-mail | index | archive | help
I have a Thinkpad 600x (TI-1450 CardBus Controller) and a Netgear FA411 PCMCIA NIC I'm trying to get working with FreeBSD. This card works fine when I boot into WinXP, but not when using FBSD. Any ideas what I should do to get the two talking under FreeBSD? uname -a: FreeBSD bart.greyhound.dyndns.org 5.1-RELEASE FreeBSD 5.1-RELEASE #2: Tue Jul 29 22:47:54 EDT 2003 root@:/usr/src/sys/i386/compile/BART i386 and from dmesg: found-> vendor=0x104c, dev=0xac1b, revid=0x03 bus=0, slot=2, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 50102000, size 12, enabled found-> vendor=0x104c, dev=0xac1b, revid=0x03 bus=0, slot=2, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 50101000, size 8, enabled map[14]: type 4, range 32, base 00004500, size 3, enabled map[18]: type 4, range 32, base 00004400, size 8, enabled cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at device 2.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: cbb_power: CARD_VCC_0V and CARD_VPP_0V [44] cbb1: <TI1450 PCI-CardBus Bridge> mem 0x5010200-0x50102fff irq 11 at devive 2.1 on pci0 cardbus1: <CardBus bus) on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: cbb_power: CARD_VCC_0V and CARD_VPP_OV [44] cbb1: card inserted: event=0x00000000, state=30000510 pccard1: chip_socket_enable cbb_pcic_socket_enable: cbb1: cbb_power: CARD_VCC_0V and CARD_VPP_0V [44] cbb1: cbb_power: CARD_VCC_5V and CARD_VPP_VCC [15] pccard1: read_cis cis mem map cf633000 pccard1: CIS tuple chain: CISTPL_END ff cis mem map cf633000 CISTPL_LINKTARGET expected, code ff observed pccard1: check_cis_quirks pccard1: Card has no functions! cbb1: PC Card card activation failed Any ideas on this? -nc -- Nathan Clark
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?GKEEKHEJKOHCFKDCPNJBKEAICGAA.nw_clark>