Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 25 Sep 2004 18:48:23 +0800 (CST)
From:      Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw>
To:        freebsd-current@freebsd.org
Subject:   5.3-BETA5/6.0-CURRENT freeze with dynamic loaded modules
Message-ID:  <04092518423116.97410@www.mmlab.cse.yzu.edu.tw>

next in thread | raw e-mail | index | archive | help
Testing platforms: ASUS A7N8X and A7N8X-X, nForce2 chipset

  Vanilla 5.3-BETA4/BETA5 installation booted successfully. However,
if g_md.ko was loaded in /boot/loader.conf or was loaded manually in
boot prompt, the system will freeze at "lo0: bpf attached" without
panic dump.

  -CURRENT kernel seems to boot on both system w/ or w/o apic compiled in
kernel. However, if usd.ko was loaded by usbd after the kernel is booted,
the kernel will freeze at "ehci0: [GIANT-LOCKED]." Meanwhile, the OHCI
version turned out to be corrupted:

ohci1: <OHCI (generic) USB controller> mem 0xee005000-0xee005fff irq 11 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb0: OHCI version 15.15, legacy support
usb0: unsupported OHCI revision
ohci1: USB init failed
device_attach: ohci1 attach returned 5

  I have no idea about why the system freeze without dumping core whilst
loading g_md.ko(in boot prompt or in loader.conf) or usb.ko(by usbd)
dynamically. It seems that the tentative workaround is to compile md
device statically and load usb.ko prior before usbd was launched
such like doing that in /boot/loader.conf.

  Following are the related dmesg with -CURRENT cvsup'ed about 1 day ago.
apic enabled, no PREEMPTION, SCHED_4BSD, all workaround applied:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Thu Sep 23 11:10:15 CST 2004
    root@tinderbox.localdomain:/usr/src/sys/i386/compile/tinderbox
Preloaded elf kernel "/boot/kernel/kernel" at 0xc072c000.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc072c244.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc072c2f0.
Preloaded elf module "/boot/modules/if_nv.ko" at 0xc072c398.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc072c444.
Calibrating clock(s) ... i8254 clock: 1193189 Hz
Timecounter "i8254" frequency 1193189 Hz quality 0
Calibrating TSC clock ... TSC clock: 2171615263 Hz
CPU: AMD Athlon(tm) XP 3000+ (2171.62-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000003edbdfff, 1046052864 bytes (255384 pages)
avail memory = 1045307392 (996 MB)
mptable_probe: MP Config Table has bad signature: \^E\^G
Table 'FACP' at 0x3fff3040
Table 'APIC' at 0x3fff74c0
MADT: Found table at 0x3fff74c0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <Nvidia AWRDACPI>
APIC: CPU 0 has ACPI ID 0
bios32: Found BIOS32 Service Directory header at 0xc00fb000
bios32: Entry = 0xfb490 (c00fb490)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4c0
pnpbios: Found PnP BIOS data at 0xc00fbf20
pnpbios: Entry = f0000:bf50  Rev = 1.0
Other BIOS signatures found:
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000888
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=01e010de)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdeb0
PCI-Only Interrupts: 5 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    D   0x04  3 4 5 7 9 10 11 12 14 15
slot 2      0   12    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 2      0   12    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0   12    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0   12    D   0x04  3 4 5 7 9 10 11 12 14 15
slot 3    255   31    A   0x0f  3 4 5 7 9 10 11 12 14 15
slot 3    255   31    B   0x0f  3 4 5 7 9 10 11 12 14 15
slot 3    255   31    C   0x0f  3 4 5 7 9 10 11 12 14 15
slot 3    255   31    D   0x0f  3 4 5 7 9 10 11 12 14 15
slot 4      1    6    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      1    6    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      1    6    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 4      1    6    D   0x04  3 4 5 7 9 10 11 12 14 15
slot 5      1    7    A   0x04  3 4 5 7 9 10 11 12 14 15
slot 5      1    7    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      1    7    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      1    7    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      1    8    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      1    8    B   0x04  3 4 5 7 9 10 11 12 14 15
slot 6      1    8    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 6      1    8    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 7      1    9    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 7      1    9    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 7      1    9    C   0x04  3 4 5 7 9 10 11 12 14 15
slot 7      1    9    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 8      1   10    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 8      1   10    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 8      1   10    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 8      1   10    D   0x04  3 4 5 7 9 10 11 12 14 15
slot 9      1   11    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 9      1   11    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 9      1   11    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 9      1   11    D   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   30    A   0x04  3 4 5 7 9 10 11 12 14 15
embedded    0   30    B   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   30    C   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   30    D   0x03  3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.APCS irq  0: [23] 23+ high,level,sharable 0.1.0
\\_SB_.PCI0.APCS irq  0: [23] 23+ high,level,sharable 0.1.1
\\_SB_.PCI0.APCF irq  0: [20 21 22]  0+ high,level,sharable 0.2.0
\\_SB_.PCI0.APCG irq  0: [20 21 22]  0+ high,level,sharable 0.2.1
\\_SB_.PCI0.APCL irq  0: [20 21 22]  0+ high,level,sharable 0.2.2
\\_SB_.PCI0.APCH irq  0: [20 21 22]  0+ high,level,sharable 0.4.0
\\_SB_.PCI0.APCI irq  0: [20 21 22]  0+ high,level,sharable 0.5.0
\\_SB_.PCI0.APCJ irq  0: [20 21 22]  0+ high,level,sharable 0.6.0
\\_SB_.PCI0.APCK irq  0: [20 21 22]  0+ high,level,sharable 0.6.1
\\_SB_.PCI0.APCM irq  0: [20 21 22]  0+ high,level,sharable 0.13.0
\\_SB_.PCI0.AP3C irq  0: [20 21 22]  0+ high,level,sharable 0.12.0
\\_SB_.PCI0.APCZ irq  0: [20 21 22]  0+ high,level,sharable 0.9.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e8000000, size 26, enabled
found->	vendor=0x10de, dev=0x01e0, revid=0xa2
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x01eb, revid=0xa2
	bus=0, slot=0, func=1
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x01ee, revid=0xa2
	bus=0, slot=0, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x01ed, revid=0xa2
	bus=0, slot=0, func=3
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x01ec, revid=0xa2
	bus=0, slot=0, func=4
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x01ef, revid=0xa2
	bus=0, slot=0, func=5
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0060, revid=0xa3
	bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 0000d000, size  5, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS)
pcib0: possible interrupts: 23
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.APCF (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCG (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCL (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCH (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCI (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCJ (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCK (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCM (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.AP3C (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCZ (references 1, priority 100):
	interrupts:	    22    21    20
	penalty:	   100   100   100
\\_SB_.PCI0.APCS (references 2, priority 40):
	interrupts:	    23
	penalty:	    20
ioapic0: Changing polarity for pin 23 to high
pcib0: slot 1 INTA routed to irq 23 via \\_SB_.PCI0.APCS
found->	vendor=0x10de, dev=0x0064, revid=0xa2
	bus=0, slot=1, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=23
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base ee004000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF)
pcib0: possible interrupts: 20 21 22
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.APCF (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCG (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCL (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCH (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCI (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCJ (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCK (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCM (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.AP3C (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
\\_SB_.PCI0.APCZ (references 1, priority 200):
	interrupts:	    22    21    20
	penalty:	   200   200   200
ioapic0: Changing polarity for pin 22 to high
pcib0: slot 2 INTA routed to irq 22 via \\_SB_.PCI0.APCF
found->	vendor=0x10de, dev=0x0067, revid=0xa3
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=22
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee005000, size 12, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCG)
pcib0: possible interrupts: 20 21 22
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.APCG (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.APCL (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.APCH (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.APCI (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.APCJ (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.APCK (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.APCM (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.AP3C (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
\\_SB_.PCI0.APCZ (references 1, priority 303):
	interrupts:	    21    20    22
	penalty:	   300   300   310
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.APCG
found->	vendor=0x10de, dev=0x0067, revid=0xa3
	bus=0, slot=2, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee000000, size  8, enabled
pcib0: matched entry for 0.2.INTC (src \\_SB_.PCI0.APCL)
pcib0: possible interrupts: 20 21 22
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.APCL (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
\\_SB_.PCI0.APCH (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
\\_SB_.PCI0.APCI (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
\\_SB_.PCI0.APCJ (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
\\_SB_.PCI0.APCK (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
\\_SB_.PCI0.APCM (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
\\_SB_.PCI0.AP3C (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
\\_SB_.PCI0.APCZ (references 1, priority 406):
	interrupts:	    20    22    21
	penalty:	   400   410   410
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 2 INTC routed to irq 20 via \\_SB_.PCI0.APCL
found->	vendor=0x10de, dev=0x0068, revid=0xa3
	bus=0, slot=2, func=2
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=c, irq=20
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee001000, size 12, enabled
	map[14]: type 4, range 32, base 0000d400, size  3, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APCH)
pcib0: possible interrupts: 20 21 22
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.APCH (references 1, priority 510):
	interrupts:	    22    21    20
	penalty:	   510   510   510
\\_SB_.PCI0.APCI (references 1, priority 510):
	interrupts:	    22    21    20
	penalty:	   510   510   510
\\_SB_.PCI0.APCJ (references 1, priority 510):
	interrupts:	    22    21    20
	penalty:	   510   510   510
\\_SB_.PCI0.APCK (references 1, priority 510):
	interrupts:	    22    21    20
	penalty:	   510   510   510
\\_SB_.PCI0.APCM (references 1, priority 510):
	interrupts:	    22    21    20
	penalty:	   510   510   510
\\_SB_.PCI0.AP3C (references 1, priority 510):
	interrupts:	    22    21    20
	penalty:	   510   510   510
\\_SB_.PCI0.APCZ (references 1, priority 510):
	interrupts:	    22    21    20
	penalty:	   510   510   510
pcib0: slot 4 INTA routed to irq 22 via \\_SB_.PCI0.APCH
found->	vendor=0x10de, dev=0x0066, revid=0xa1
	bus=0, slot=4, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=22
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d800, size  8, enabled
	map[14]: type 4, range 32, base 0000dc00, size  7, enabled
	map[18]: type 1, range 32, base ee002000, size 12, enabled
pcib0: matched entry for 0.6.INTA (src \\_SB_.PCI0.APCJ)
pcib0: possible interrupts: 20 21 22
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.APCI (references 1, priority 613):
	interrupts:	    21    20    22
	penalty:	   610   610   620
\\_SB_.PCI0.APCJ (references 1, priority 613):
	interrupts:	    21    20    22
	penalty:	   610   610   620
\\_SB_.PCI0.APCK (references 1, priority 613):
	interrupts:	    21    20    22
	penalty:	   610   610   620
\\_SB_.PCI0.APCM (references 1, priority 613):
	interrupts:	    21    20    22
	penalty:	   610   610   620
\\_SB_.PCI0.AP3C (references 1, priority 613):
	interrupts:	    21    20    22
	penalty:	   610   610   620
\\_SB_.PCI0.APCZ (references 1, priority 613):
	interrupts:	    21    20    22
	penalty:	   610   610   620
pcib0: slot 6 INTA routed to irq 21 via \\_SB_.PCI0.APCJ
found->	vendor=0x10de, dev=0x006a, revid=0xa1
	bus=0, slot=6, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=a, irq=21
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x10de, dev=0x006c, revid=0xa3
	bus=0, slot=8, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x10de, dev=0x0065, revid=0xa2
	bus=0, slot=9, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x10de, dev=0x01e8, revid=0xa2
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xee004000-0xee004fff irq 22 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee004000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xee005000-0xee005fff irq 21 at device 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee005000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xee000000-0xee0000ff irq 20 at device 2.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xee000000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nv0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd400-0xd407 mem 0xee001000-0xee001fff irq 22 at device 4.0 on pci0
nv0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee001000
nv0: Ethernet address 00:e0:18:eb:15:ed
miibus0: <MII bus> on nv0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nv0: bpf attached
nv0: Ethernet address: 00:e0:18:eb:15:ed
nv0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
\\_SB_.PCI0.APC1 irq  0: [16] 16+ high,level,sharable 1.6.0
\\_SB_.PCI0.APC2 irq  0: [17] 17+ high,level,sharable 1.6.1
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.6.2
\\_SB_.PCI0.APC4 irq  0: [19] 19+ high,level,sharable 1.6.3
\\_SB_.PCI0.APC4 irq  0: [19] 19+ high,level,sharable 1.7.0
\\_SB_.PCI0.APC1 irq  0: [16] 16+ high,level,sharable 1.7.1
\\_SB_.PCI0.APC2 irq  0: [17] 17+ high,level,sharable 1.7.2
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.7.3
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.8.0
\\_SB_.PCI0.APC4 irq  0: [19] 19+ high,level,sharable 1.8.1
\\_SB_.PCI0.APC1 irq  0: [16] 16+ high,level,sharable 1.8.2
\\_SB_.PCI0.APC2 irq  0: [17] 17+ high,level,sharable 1.8.3
\\_SB_.PCI0.APC2 irq  0: [17] 17+ high,level,sharable 1.9.0
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.9.1
\\_SB_.PCI0.APC4 irq  0: [19] 19+ high,level,sharable 1.9.2
\\_SB_.PCI0.APC1 irq  0: [16] 16+ high,level,sharable 1.9.3
\\_SB_.PCI0.APC1 irq  0: [16] 16+ high,level,sharable 1.10.0
\\_SB_.PCI0.APC2 irq  0: [17] 17+ high,level,sharable 1.10.1
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.10.2
\\_SB_.PCI0.APC4 irq  0: [19] 19+ high,level,sharable 1.10.3
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.11.0
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.11.1
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.11.2
\\_SB_.PCI0.APC3 irq  0: [18] 18+ high,level,sharable 1.11.3
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xec000000-0xedffffff
pcib2:   prefetched decode 0xe0000000-0xe7ffffff
AcpiOsDerivePciId: bus 0 dev 30 func 0
ACPI PCI link initial configuration:
\\_SB_.PCI0.APC4 irq  0: [19] 19+ high,level,sharable 2.0.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 1, range 32, base ec000000, size 24, enabled
pcib2: device (null) requested decoded memory range 0xec000000-0xecffffff
	map[14]: type 3, range 32, base e0000000, size 27, enabled
pcib2: device (null) requested decoded memory range 0xe0000000-0xe7ffffff
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.APC4)
pcib2: possible interrupts: 19
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.APCI (references 1, priority 616):
	interrupts:	    20    22    21
	penalty:	   610   620   620
\\_SB_.PCI0.APCK (references 1, priority 616):
	interrupts:	    20    22    21
	penalty:	   610   620   620
\\_SB_.PCI0.APCM (references 1, priority 616):
	interrupts:	    20    22    21
	penalty:	   610   620   620
\\_SB_.PCI0.AP3C (references 1, priority 616):
	interrupts:	    20    22    21
	penalty:	   610   620   620
\\_SB_.PCI0.APCZ (references 1, priority 616):
	interrupts:	    20    22    21
	penalty:	   610   620   620
\\_SB_.PCI0.APC4 (references 6, priority 120):
	interrupts:	    19
	penalty:	    20
\\_SB_.PCI0.APC1 (references 5, priority 0):
	interrupts:	     0
	penalty:	100000
\\_SB_.PCI0.APC2 (references 5, priority 0):
	interrupts:	     0
	penalty:	100000
\\_SB_.PCI0.APC3 (references 9, priority 0):
	interrupts:	     0
	penalty:	100000
ioapic0: Changing polarity for pin 19 to high
pcib2: slot 0 INTA routed to irq 19 via \\_SB_.PCI0.APC4
found->	vendor=0x10de, dev=0x0110, revid=0xb2
	bus=2, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=19
	powerspec 2  supports D0 D3  current D0
pci2: <display, VGA> at device 0.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x821 0x831 0x821 0x821
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x821 0x829 0x821 0x821
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd4000-0xd57ff,0xd0000-0xd3fff,0xc0000-0xcc7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 2171615263 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ata0-master: setting PIO4 on nVidia nForce2 chip
ata0-master: setting UDMA133 on nVidia nForce2 chip
ad0: <Maxtor 6Y120P0/YAR41BW0> ATA-7 disk at ata0-master
ad0: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA133
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 50us
ata1-master: setting PIO4 on nVidia nForce2 chip
ata1-master: setting UDMA33 on nVidia nForce2 chip
acd0: <ASUS CD-S520/A5/1.0> CDROM drive at ata1 as master
acd0: read 687KB/s (8937KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <ASUS CD-S520/A5 1.0> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
pass0 at ata1 bus 0 target 0 lun 0
pass0: <ASUS CD-S520/A5 1.0> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
GEOM: new disk ad0
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20964762
[1] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20964825 l:201326580
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:222291405 l:17816085
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10733958144 end 10733990399
GEOM: Configure ad0s2, start 10733990400 length 103079208960 end 113813199359
GEOM: Configure ad0s3, start 113813199360 length 9121835520 end 122935034879
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:201326517
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s5, start 32256 length 103079176704 end 103079208959
GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s3b, start 268435456 length 2121048064 end 2389483519
GEOM: Configure ad0s3c, start 0 length 9121835520 end 9121835519
GEOM: Configure ad0s3d, start 2389483520 length 16777216 end 2406260735
GEOM: Configure ad0s3e, start 2406260736 length 1476395008 end 3882655743
GEOM: Configure ad0s3f, start 3882655744 length 5239179776 end 9121835519
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
Linux ELF exec handler installed
procfs registered
linprocfs registered



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?04092518423116.97410>